What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.

A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Blacksmith's Punch?

A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Mechanical Finger?

A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.

A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Screwdriver And Wrench Assembly?

A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Stakeholder Bench Plate?

A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.

What is a Drill Drift?

A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.

A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Digging Bar?

A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

What is a Valve Spring Lifter?

A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.

What is a Fuse Puller?

A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.

Hand Tools, Nonedged, Nonpowered - France (FR)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by France (FR) - NCB is 14

Page 60 of 110

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by France

51	20	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - France (FR)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 16 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Pipe Vise? 19 Items: A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.
What is a Hand Vise? 25 Items: A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.
What is a Hand Hydraulic Jack? 133 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 153 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 903 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 17 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
Swage,Bottom,Blacksmith's 10 Items
What is a Hand Tube Flaring Tool? 23 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Blacksmith's Punch? 12 Items: A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.
What is a Drain Plug Wrench? 45 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 57 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 16 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 3829 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
Flatter,Blacksmith's 18 Items
Swage,Top,Blacksmith's 12 Items
What is a Pipe Wrench? 110 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 149 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 53 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
Screwdriver,Offset 54 Items
What is a Screwdriver Bit? 707 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Mechanical Finger? 25 Items: A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.
What is a Socket Wrench Socket? 1803 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 1412 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 1641 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 52 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 565 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
Jack,Push-Pull,Screw 30 Items
What is a Hand Tube Bender? 54 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 1106 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 55 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pinch Bar? 19 Items: A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.
What is a Pry Bar? 17 Items: A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.
What is a Wrecking Bar? 15 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 273 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 413 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 32 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 295 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
Face,Hammer,Inserted 25 Items
What is a Hole Sheet Metal Holder? 37 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Screwdriver And Wrench Assembly? 11 Items: A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.
What is a Hand Rivet Set? 121 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Stakeholder Bench Plate? 22 Items: A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.
What is a Drill Drift? 32 Items: A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.
What is a Tack Claw? 15 Items: A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.
Mattock 28 Items
What is a Socket Wrench Handle Bar? 108 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Stake,Sheet Metalworking 50 Items
Riveter,Blind,Hand 76 Items
What is a Hand Shovel? 43 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 98 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 30 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
What is a Digging Bar? 20 Items: A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.
Block,Dolly,Sheet Metalworking 56 Items
What is a Piston Ring Compressor? 34 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Valve Spring Lifter? 29 Items: A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.
What is a Fuse Puller? 20 Items: A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.
What is a Hand Lead Seal Press? 18 Items: A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.
What is a Hand Beading Tool? 91 Items: A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.
What is a Hand Hammer? 502 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
Head,Hand Hammer 81 Items
What is a Lamp Extractor? 76 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Tube Packing Ring Installing Tool? 29 Items: A Tube Packing Ring Installing Tool (INSTALLING TOOL,TUBE PACKING RING) is an item designed to insert packing rings on tubes within tube sheets on condensers and similar heat exchangers. In operation, the packing rings are assembled on the loading pin mandrel and are then transferred from the mandrel on to the tube by means of a tubular sleeve which slides on the mandrel.
What is a Carpenters' Pincers? 18 Items: A Carpenters' Pincers (PINCERS,CARPENTERS') is a plierlike hand tool having two opposing jaws which may have hammerlike backs. One handle has a nail or tack pulling claw, the other is shaped to form a screwdriver. The tool may contain a wire cutter. See also NIPPERS, END CUTTING and PINCERS, FARRIERS'.
What is a Trowel? 33 Items: A Trowel is a tool used for bricklaying, concrete work, plastering, linoleum laying, and masonry work. Excludes CORNER TOOL, CONCRETE.
What is a Hand Abrasive Wheel Dresser? 12 Items: A Hand Abrasive Wheel Dresser (DRESSER,ABRASIVE WHEEL,HAND) is a tool designed to remove glaze from, dress, shape, sharpen, and true solid abrasive wheels. Excludes NIB, DIAMOND, WHEEL DRESSING.
What is a Lamp Cap Extractor? 32 Items: A Lamp Cap Extractor (EXTRACTOR,LAMP CAP) is a tool specifically designed to facilitate the removal of lamp caps from switchboards, panels or indicator lamps.
What is a Rivet Bucking Bar? 51 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 86 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 277 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Woven Cable Grip? 23 Items: A Woven Cable Grip (GRIP,CABLE,WOVEN) is a braided wire device designed to clutch a bare or insulated conductor, cable or wire rope, for holding taut or drawing through conduit.
What is a Screw Thread Insert Extractor? 19 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is an Electron Tube Extractor? 18 Items: An Electron Tube Extractor (EXTRACTOR,ELECTRON TUBE) is a hand tool designed to facilitate the removal of electron tubes from electronic equipment and to avoid burning the fingers. It may be used for installing tubes.
What is a Cross Tip Screwdriver? 362 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 21 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 11 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 37 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Tool Handle Wedge? 10 Items: A Tool Handle Wedge (WEDGE,TOOL HANDLE) is excludes WEDGE, WOOD.
What is a Marlinespike? 16 Items: A Marlinespike is a metal hand tool made in the shape of a tapered pin. One end is pointed and the opposite end may be headed. The body may contain an eye for a lanyard sling, or be grooved lengthwise. Excludes CABLE PICK and FID.
What is an Aligning Punch? 272 Items: An Aligning Punch (PUNCH,ALIGNING) is a round, square, hexagonal or octagonal bodied hand tool, having a round tapered section 6-1/2 inches (165.1 mm) or more in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, DRIFT and DRIFTPIN.
What is a Drift Punch? 25 Items: A Drift Punch (PUNCH,DRIFT) is a round, square, hexagonal, or octagonal bodied hand tool, having a round tapered section 4 to 6 inches (101.6 mm to 152.4 mm) inclusive in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, ALIGNING; and DRIFTPIN.
What is a Putty Knife? 36 Items: A Putty Knife (KNIFE,PUTTY) is a hand tool with a nonedged blade fixed to a handle for laying on and smoothing putty and the like.
What is a Socket Wrench Adapter-Extension? 40 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 30 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 184 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Socket Wrench Ratchet Attachment? 47 Items: A Socket Wrench Ratchet Attachment (RATCHET ATTACHMENT,SOCKET WRENCH) is a connection for socket wrenches and handles. Consists of a ratcheting mechanism with an internal drive on one end and an external drive on the opposite end of the same size. The item is designed to permit continuous rotation of the socket in one direction without removing the socket or handle and without a complete rotation of the handle.
What is a Wrench Extension Handle? 81 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Socket Wrench Crowfoot Attachment? 155 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 33 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 43 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 48 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 2394 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 372 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 300 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 661 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 32 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand-Operated Grommet And Eyelet Press? 12 Items: A Hand-Operated Grommet And Eyelet Press (PRESS,GROMMET AND EYELET,HAND-OPERATED) is a device which punches or pierces holes and in addition fastens or sets eyelets and grommets in cloth, paper and similar material. May be used for fastening or setting rivets, lacing hooks and snaps in cloth, paper and similar material. It is hand operated by lever or screw action. See also PUNCH, EYELET, PLIER TYPE and PRESS, GROMMET AND EYELET, FOOT OPERATED.
What is a Claw Bar? 19 Items: A Claw Bar (BAR,CLAW) is before using, refer to Reference Drawing Group AG.
What is a Shock Type Wheel Stud Nut Wrench? 11 Items: A Shock Type Wheel Stud Nut Wrench (WRENCH,WHEEL STUD NUT,SHOCK TYPE) is a manually operated item designed to remove wheel stud nuts. In operation the inner nut is turned by a socket attached to a shaft on which is a loose swinging weighted handle. The weighted handle may be swung quickly to provide an impact force against the socket to loosen the seized or jammed nuts. The outer nut is held stationary by a separate hexagonal holding wrench.
What is a Drift Pin Set? 30 Items: A Drift Pin Set is a group of DRIFTPIN having different characteristics.
What is a Tire Iron? 25 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 115 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Blacksmith's Vise? 14 Items: A Blacksmith's Vise (VISE,BLACKSMITH'S) is a clamping device consisting of a mounting plate, one stationary and one manual screw actuated jaw and a supporting member extending downward from the stationary jaw to the floor. Designed to be mounted on a bench, table or the like. May include pipe holding jaws.
What is a Machinist's Vise? 64 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Clamp Base Bench Vise? 10 Items: A Clamp Base Bench Vise (VISE,BENCH,CLAMP BASE) is a clamping device consisting of a base, one stationary and one manual screw actuated jaw, and one or more guide bars or rods. Designed with an integral clamp for attaching to a bench, table, or the like. Does not include pipe holding jaws.
What is a Fixed Open End Wrench Set? 86 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Nail Set? 11 Items: A Nail Set is a round knurled, square, hexagonal or octagonal bodied hand tool having a round tapered section terminating in a cupped point. It is designed to set brad head nails below the surface by striking it a hammerlike blow. See also PUNCH, DRIVE PIN.
What is a Socket Wrench Set? 202 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is an Open End Box Wrench Set? 10 Items: An Open End Box Wrench Set (WRENCH SET,OPEN END BOX) is a group of WRENCH, OPEN END BOX having different characteristics.
What is a Combination Box And Open End Wrench Set? 72 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Box Wrench Set? 36 Items: A Box Wrench Set (WRENCH SET,BOX) is a group of box wrenches having different characteristics. It may include a HANDLE, EXTENSION WRENCH. See also WRENCH SET, COMBINATION, BOX AND OPEN END.
What is a Hot Line Stick? 26 Items: A Hot Line Stick is a hand tool consisting of a straight, round stick (pole) made of a suitable nonconductive material with a tool fixed to one end. The other end may be plain or have a butt mounting device fixed to it. Various types of attachments (hooks, rings, and bands) may be fixed to the body. It is designed for use in the repair and maintenance of live high voltage aerial lines. Excludes hot line sticks without heads.
Handle,Mattock-Pick 15 Items
What is a Wrench Kit? 73 Items: A Wrench Kit is an assortment of various types and sizes of wrenches such as SOCKET, SOCKET WRENCH; WRENCH, OPEN END, FIXED; WRENCH, BOX and the like. It may include adapter(s), ratchet(s) and the like. See also WRENCH SET (as modified.
What is a Brad Awl? 15 Items: A Brad Awl (AWL,BRAD) is a small, pointed tool used by shoemakers, saddlers, cabinetmakers, and the like for piercing small holes in wood, leather, and similar materials, and consists of a handle with a ferrule and a blade. The blade is round, terminating in a beveled, sharp straight edge and has a shank which passes through the center of the handle.
What is a Scratch Awl? 20 Items: A Scratch Awl (AWL,SCRATCH) is an item whose nominal length of blade is less than 4 inches (101.6 millimeters) and is provided with a nondetachable handle.
What is a Screw Extractor Set? 10 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 102 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
Jack,Scissors,Hand 26 Items
What is a Piston Ring Expander? 23 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
Mallet,Plastic 62 Items
Mallet,Rubber 10 Items
What is a Wood Mallet? 37 Items: A Wood Mallet (MALLET,WOOD) is excludes MALLET, CALKING; MALLET, HAWSING and MALLET, SERVING.
What is a Rack Bar Jack? 30 Items: A Rack Bar Jack (JACK,RACK BAR) is excludes JACK, BUMPER and JACK, REEL, HAND.
What is a Pneumatic Tire Valve Core Inserter And Remover? 14 Items: A Pneumatic Tire Valve Core Inserter And Remover (INSERTER AND REMOVER,PNEUMATIC TIRE VALVE CORE) is a bar of steel having a small cylindrical slotted end for removing or installing a valve core in a valve stem by a screwing motion. See also REPAIR TOOL, PNEUMATIC TIRE VALVE.
What is a Hand Tube Swaging Tool Kit? 20 Items: A Hand Tube Swaging Tool Kit (SWAGING TOOL KIT,TUBE,HAND) is a hand-operated noncutting tool consisting of one or more PUNCH, TUBE SWAGING, HAND and a tube flaring bar.
What is a Hand Tube Flaring Punch? 11 Items: A Hand Tube Flaring Punch (PUNCH,TUBE FLARING,HAND) is a noncutting tool having a shaped end or section designed to flare the ends of tubes. One type is designed to flare the ends of tubes against a tube sheet, and another to flare tube ends to mate with tube fittings. Includes punch components of FLARING TOOL, TUBE, HAND.
What is a Hose Strap Band Clamping Tool? 26 Items: A Hose Strap Band Clamping Tool (CLAMPING TOOL,STRAP BAND,HOSE) is an item designed to tension and lock metal straps around a rubber hose, and the like. It is also used to clamp and hold fittings therein.
What is a Mechanical Puller? 3073 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 470 Items
What is a Slip Joint Pliers? 84 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Brake Repair Pliers? 14 Items: A Brake Repair Pliers (PLIERS,BRAKE REPAIR) is a tool having jaws designed for use in brake repair operations, such as removing and replacing items such as keys, springs, and the like. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 226 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 12 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 81 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 56 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 15 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 11 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 29 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Cross Tip Screwdriver Set? 14 Items: A Cross Tip Screwdriver Set (SCREWDRIVER SET,CROSS TIP) is a group of SCREWDRIVER, CROSS TIP having different characteristics.
What is a Spanner Wrench Set? 18 Items: A Spanner Wrench Set (WRENCH SET,SPANNER) is a group of items under WRENCH, SPANNER having different characteristics.
What is a Drive Pin Punch Set? 31 Items: A Drive Pin Punch Set (PUNCH SET,DRIVE PIN) is a group of PUNCH, DRIVE PIN having different characteristics.
What is an Aligning Punch Set? 13 Items: An Aligning Punch Set (PUNCH SET,ALIGNING) is a group of PUNCH, ALIGNING having different characteristics. See also DRIFTPIN SET.
What is a Slugging Type Box Wrench Socket? 16 Items: A Slugging Type Box Wrench Socket (SOCKET,SLUGGING TYPE BOX WRENCH) is an item having a hexagonal external drive at one end, made to fit into the internal hexagonal or 12-point opening of a slugging type box wrench. The opposite end has a single-broached hexagonal opening of the same size as the external drive. The item is designed with extra thick walls to withstand the impact of sledge blows on the driving wrench.
What is a Mechanical Puller Step Plate? 44 Items: A Mechanical Puller Step Plate (STEP PLATE,MECHANICAL PULLER) is a circular disk, flanged to provide a shoulder, and designed to provide a base for the screw point of a PULLER, MECHANICAL when pulling externally mounted bearings, gears, and the like from hollow shafts or housings. It has a concentric, countersunk hole to accommodate the puller screw point.
What is a Solid Center Punch? 79 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Cable Type Ratchet Lever Puller? 20 Items: A Cable Type Ratchet Lever Puller (PULLER,RATCHET LEVER,CABLE TYPE) is an item consisting of a metal frame and ratchet lever reel to which is attached one end of a flexible cable (wire rope). The cable feeds through the fast eye in the metal frame, and may be reeved through a slip hook tackle hook. See also BINDER, LOAD; HOIST, WIRE ROPE and STRETCHER, WIRE.
What is an Electronic Equipment Tuning Wand? 18 Items: An Electronic Equipment Tuning Wand (TUNING WAND,ELECTRONIC EQUIPMENT) is a hand-held rod used in determining the adjustment of the windings of a radio frequency coil. It is made of insulating material with iron on one end and brass on the other end. By inserting the iron end in the coil, the inductance is increased and by inserting the brass end, the inductance is decreased.
What is a Combination Open End And Spanner Wrench? 14 Items: A Combination Open End And Spanner Wrench (WRENCH,OPEN END AND SPANNER,COMBINATION) is a tool having open end wrench characteristics at one end and spanner wrench features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s) at the other end.
What is a Detent Handling Tool? 187 Items: A Detent Handling Tool (HANDLING TOOL,DETENT) is a specially designed handling tool consisting of a rigid bar with a T-handle on one end. The other end is equipped with threads designed to mate the threads of a detent to facilitate inserting or extracting.
What is a Hand Material Handling Hook? 23 Items: A Hand Material Handling Hook (HOOK,MATERIAL HANDLING,HAND) is a hook whose curved end conforms to Style AP1, AP2, AP3 or AP4 of Reference Drawing Group AP. Excludes HOOK, MANHOLE COVER, HAND; HOOK, WIRE BREAKING, HAND; HOOK, ROCK CRUSHER FEEDING, HAND; HOOK, STRAINER REMOVING, HAND and HOOKS, BAG HANDLING, HAND.
What is a Magnetic Retrieving Tool? 11 Items: A Magnetic Retrieving Tool (RETRIEVING TOOL,MAGNETIC) is a hand-operated magnetic device used to locate and pick up metallic articles, such as bolts, nuts, pins, washers, and the like, in confined spaces. It may be rigid, flexible or adjustable. Excludes FINGER, MECHANICAL.
What is a Mechanical Puller Adapter? 78 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Combination Box And Open End Box Wrench? 13 Items: A Combination Box And Open End Box Wrench (WRENCH,BOX AND OPEN END BOX,COMBINATION) is a double end wrench, box and open end box, primarily designed for removing or replacing tube fittings. The opening in the open end box may be machined at an angle from the longitudinal center line of the wrench.
What is a Screw Thread Insert Inserter? 136 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Flat Tip Screwdriver Set? 48 Items: A Flat Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP) is a group of SCREWDRIVER, FLAT TIP having different characteristics.
What is a Terminal Crimping Tool Contact Positioner? 89 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 16 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is an Adjustable Wrench? 138 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 239 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 75 Items
Handle,Shovel 10 Items
What is a Socket Wrench Spanner Attachment? 88 Items: A Socket Wrench Spanner Attachment (SPANNER ATTACHMENT,SOCKET WRENCH) is an item having an adjustable or fixed span with pin, hook, or key type end that is used to fit and turn various size retaining rings, cover plates, plugs, couplings, and like parts. Usually designed to be driven by a male driver.
What is a Retaining Ring Installation Tool? 44 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Tacker? 16 Items: A Tacker is a hand-operated, hammerlike or gunlike item without a clincher, used to drive preformed connecting elements like pins, nails or staples through one object or piece of material into another. Excludes STAPLER (as modified).
What is a Bearing And Bushing Inserter? 290 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 207 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 939 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 14 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 93 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 161 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 94 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 141 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 53 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Six Point Tip Screwdriver? 155 Items: A Six Point Tip Screwdriver (SCREWDRIVER,SIX POINT TIP) is a manual screwdriver having a single nonremoveable blade having a tip with six rounded points.
What is a Seal Inserter And Remover? 147 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 478 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is a Preformed Packing Inserter And Remover? 34 Items: A Preformed Packing Inserter And Remover (INSERTER AND REMOVER,PREFORMED PACKING) is a hand tool designed to install and remove a PACKING, PREFORMED.
What is a Pin Remover? 34 Items: A Pin Remover (REMOVER,PIN) is a hand tool designed to facilitate the removal of a pin from a hole.
What is a Pin Inserter And Remover? 13 Items: A Pin Inserter And Remover (INSERTER AND REMOVER,PIN) is a rodlike tool designed to facilitate the insertion and removal of a pin from a hole.
What is an Electrical Contact Inserter And Remover? 37 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Piston Inserter? 40 Items: A Piston Inserter (INSERTER,PISTON) is a tool designed to permit installation of a piston or piston assembly without damaging the packings or piston.
What is a Spring Inserter And Remover? 85 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 13 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Stud Inserter? 22 Items: A Stud Inserter (INSERTER,STUD) is a device designed to drive in studs. It does not have any facilities for removing or extracting studs. See also INSERTER AND REMOVER, STUD.
What is a Stud Inserter And Remover? 17 Items: A Stud Inserter And Remover (INSERTER AND REMOVER,STUD) is a group of items designed to extract and to drive studs. It may include collets, guides, housings, holders and the like. See also REMOVER SET, STUD and INSERTER, STUD.
What is a Gear Inserter? 54 Items: A Gear Inserter (INSERTER,GEAR) is a hand tool designed to install various gears onto a gearshaft. It may be operated by a pushing or a striking force.
What is a Crimping Tool Die? 73 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is an Electrical Connector Inserter? 45 Items: An Electrical Connector Inserter (INSERTER,ELECTRICAL CONNECTOR) is a hand tool designed to hold an electrical connector, and to assist in the positioning and installation of the connector on a cover, panel or the like.
What is a Float? 12 Items: A Float is a tool used for concrete, plastering and grouting work.
What is a Mechanical Puller Set? 19 Items: A Mechanical Puller Set (PULLER SET,MECHANICAL) is two or more separate PULLER, MECHANICAL of different fixed sizes.
What is a Lifting Pneumatic Bag? 11 Items: A Lifting Pneumatic Bag (PNEUMATIC BAG,LIFTING) is a device made of flexible material designed to lift another item by being placed under the item and being inflated with air or some other gas. It will have a means of being connected to an air or gas source and may include a connector hose, a control valve and/or a pressure regulator.
What is a Cable Tie Installation Tool? 22 Items: A Cable Tie Installation Tool (INSTALLATION TOOL,CABLE TIE) is a lightweight, hand-held, hand-operated tool designed to fasten cable ties, straps and the like. Cable tie is inserted into the nose of the tool flush to the cable tie head. Trigger handle tightens cable tie and cuts off any excess. These installation tools are available in a variety of sizes depending on their intended use with miniature, intermediate, standard, heavy or extra heavy cross section ties.
What is a Bearing Staking Installation Tool? 159 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
Wrench Set,Ratchet 15 Items
What is a Sealant Dispenser? 26 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Retaining Ring Pliers Set? 10 Items: A Retaining Ring Pliers Set (PLIERS SET,RETAINING RING) is a group of PLIERS, RETAINING RING having different characteristics.
What is a Hand Armament Subsystem Carrier? 52 Items: A Hand Armament Subsystem Carrier (CARRIER,ARMAMENT SUBSYSTEM,HAND) is a metallic item with a clamp device and/or space for depositing articles. It is used for transporting weapon parts during maintanence and/or repair work, such as gun barrel, automatic loader, breechblock and the like.
What is a Ring Retaining Pliers Tip Set? 13 Items: A Ring Retaining Pliers Tip Set (TIP SET,PLIERS,RING RETAINING) is a collection of removable metallic tips in matched pairs used to provide various size capablities to PLIERS, RING RETAINING which permits the removal and installation of internal and external retaining rings.
What is a Plug Electrical Connector Extractor? 45 Items: A Plug Electrical Connector Extractor (EXTRACTOR,ELECTRICAL CONNECTOR,PLUG) is a hand tool designed to disassemble CONNECTOR, PLUG, ELECTRICAL from a CONNECTOR, RECEPTACLE, ELECTRICAL.
What is a Torque Wrench Adapter Set? 10 Items: A Torque Wrench Adapter Set (ADAPTER SET,TORQUE WRENCH) is tWO or more ADAPTER, TORQUE WRENCH of different sizes.
What is an Electronic Component Inserter And Remover? 79 Items: An Electronic Component Inserter And Remover (INSERTER AND REMOVER,ELECTRONIC COMPONENT) is an item which can insert or remove an electronic component package such as MICROCIRCUIT; RESISTOR, NETWORK (as modified); and the like from its mounting position or socket. Excludes INSERTER AND REMOVER, ELECTRICAL CONTACT; REMOVER, ELECTRICAL CONTACT; EXTRACTOR, ELECTRICAL CARD; EXTRACTOR, ELECTRONIC CRYSTAL UNIT; EXTRACTOR, ELECTRON TUBE.
What is an Impact Type Bit Set And Handle Screwdriver? 14 Items: An Impact Type Bit Set And Handle Screwdriver (SCREWDRIVER,BIT SET AND HANDLE,IMPACT TYPE) is an item consisting of a set of screwdriver bits and a impact driver to accommodate the bits of various types and characteristics. It is designed to transmit a strong rotating movement by the impact of a hammer blowed on the impact driver. It is used to loosen rusted or seized screws. Excludes SCREWDRIVER, BIT SET AND HANDLE.
What is a Hand Vise Jaw? 19 Items: A Hand Vise Jaw (JAW,VISE,HAND) is an item consisting of two opposing parts of a VISE, HAND. The item is moveable and able to open and close. It can hold, grasp or clamp work.
What is a Screwdriver Handle? 28 Items: A Screwdriver Handle (HANDLE,SCREWDRIVER) is an item used to accommodate various types of BIT, SCREWDRIVER. It is designed to rotate a bit that is used for installing or removing screws.
What is a Wire Twister Pliers? 25 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 284 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is a Mechanical Puller Body? 45 Items: A Mechanical Puller Body (BODY,PULLER,MECHANICAL) is an item designed to support and enclose the internal parts of a PULLER,MECHANICAL.
What is a Flat Tip And Cross Tip Screwdriver Set? 39 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is a Socket Wrench Screwdriver Attachment Set? 22 Items: A Socket Wrench Screwdriver Attachment Set (SCREWDRIVER ATTACHMENT SET,SOCKET WRENCH) is a set of screwdriver attachment, socket wrench of different sizes. Items consist of a female square drive on one end to attach to a handle, socket wrench and various screwdriver tip configurations on the opposite end. Excludes SCREWDRIVER ATTACHMENT,SOCKET WRENCH
What is an Oil Filter Wrench? 44 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 430 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Communications Equipment Spring Adjuster? 13 Items: A Communications Equipment Spring Adjuster (ADJUSTER,SPRING,COMMUNICATIONS EQUIPMENT) is a single or double end tool, equipped with slot(s) of various dimensions or with cylindrical rod(s), used for adjusting the springs or spring tensioned parts of electronic equipment.
What is a Rotating Members Aligning Tool? 32 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
What is a Final Drive Assembly Alignment Pin? 41 Items: A Final Drive Assembly Alignment Pin (ALIGNMENT PIN,FINAL DRIVE ASSEMBLY) is a special designed pin used in the assembling of the final drive.
Arm,Handling Tool 77 Items
What is a Splicing Sleeve Compressing Tool? 23 Items: A Splicing Sleeve Compressing Tool (COMPRESSING TOOL,SPLICING SLEEVE) is a hand tool having hinged leverage handles similar to a CUTTER, BOLT or pliers, designed to compress a splicing sleeve when joining the ends of two conductors, or when forming an eye splice in the end of a wire rope. Excludes CRIMPING TOOL, TERMINAL, HAND.
What is a Hand Screw Jack Extension? 14 Items: A Hand Screw Jack Extension (EXTENSION,HAND SCREW JACK) is a length of externally threaded rigid shafting which is the adjustable section of a JACK, SCREW, HAND.
What is a Mechanical Puller Gear Adapter? 21 Items: A Mechanical Puller Gear Adapter (GEAR ADAPTER,PULLER,MECHANICAL) is an adapter that adapts a PULLER,MECHANICAL, to pull a certain gear.
Handle,Hydraulic Jack 18 Items
What is a Female Electrical Contact Resizing Tool? 11 Items: A Female Electrical Contact Resizing Tool (RESIZING TOOL,FEMALE ELECTRICAL CONTACT) is a tool designed to shape to a specific size, female contacts such as those used on electrical connectors, tube sockets, crystal sockets, and pin jacks.
What is a Screwdriver And Socket Wrench Combination? 13 Items: A Screwdriver And Socket Wrench Combination is a hand-tool formed into an integral unit with a socket wrench at one end and a screwdriver bit at the other end. See also SCREWDRIVER AND WRENCH ASSEMBLY.
What is a Hand Hose Fitting Swaging Tool Kit? 11 Items: A Hand Hose Fitting Swaging Tool Kit (SWAGING TOOL KIT,HOSE FITTING,HAND) is a device, hydraulically actuated by hand or power operated pump, consisting of face plate, adapter plate, finger cages, fingers, ram, bushing, and expanding mandrels combined on a single base in various functional arrangements. It is used for swaging the outside diameter of hose assembly fittings, expanding the inside diameter of hose assemblies, and securing the fabrication of hose assemblies. Included are a hand or power operated pump, lubricant, cases, and trays.
What is a Catch Lever Tool? 12 Items: A Catch Lever Tool (LEVER TOOL,CATCH) is a specially designed hand tool which engages the opening and closing lever of a CATCH (as modified) for ease of operation. It is constructed of thin rigid material, usually flat, and one end has an engaging tongue.
What is a Manual Impact Wrench? 11 Items: A Manual Impact Wrench (WRENCH,IMPACT,MANUAL) is a manually operated handheld tool consisting of spring-loaded handle and a power-impact head which delivers a torsional impact from either continuous movement of the handle in one direction, or by a reciprocating action. It is used in tightening and loosening fasteners, such as bolts, nuts, and the like. The item may include sockets, extensions and offset fittings, nut runners, and the like.
What is a Drift? 63 Items: A Drift is an item consisting of a tubular body fitted with replaceable tips. It is designed to insert or remove mechanical components where space is restricted.
What is a Nutdriver? 46 Items: A Nutdriver is a non-powered hand tool with a screwdriver style handle, shaft and formed female hex or square socket at driving end.
What is a Locking Device Removal Tool? 12 Items: A Locking Device Removal Tool (REMOVAL TOOL,LOCKING DEVICE) is a hand tool designed to facilitate the removal of a WASHER, KEY and a LOCKING PLATE, NUT AND BOLT.
What is a Hydraulic Fitting Crimping Tool Head? 26 Items: A Hydraulic Fitting Crimping Tool Head (HEAD,CRIMPING TOOL,HYDRAULIC FITTING) is a component of a crimping tool used to compress fittings on fluid tubes. It consists of a U-shape item, in which, are mounted different sizes of DIE, CRIMPING TOOL for tubes of various diameters.
What is a Torque Screwdriver? 11 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.
What is a Special Purpose Combination Wrench? 13 Items: A Special Purpose Combination Wrench (WRENCH,COMBINATION,SPECIAL PURPOSE) is a tool having a combination of ends and facets. The ends may have open end, box or spanner characteristics. The sides may have features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s). Designed to fit specific items, not sized as standard or metric.
What is a Screwdriver Bit Holder? 56 Items: A Screwdriver Bit Holder (HOLDER,SCREWDRIVER BIT) is an attachment with a socket end for accepting male hexagon shank insert bits and a drive end for adapting to a portable power or hand tool.
What is a Telescoping Pole? 16 Items: A Telescoping Pole (POLE,TELESCOPING) is an item which is designed to be extended or compressed by the sliding of overlapping sections. This item may or may not be able to accommodate an extension.

Stock Items From Supply Class 5120 Page 60 of 110

5120-14-425-5974
Open End Wrench

144255974
44.7/16X1/2: RNCC: 3 | RNVC: 2
3148511044315: RNCC: 5 | RNVC: 2
44-7-16X1-2: RNCC: 5 | RNVC: 2
0104430: RNCC: 5 | RNVC: 9
0104431: RNCC: 5 | RNVC: 9

12 Jul 1988

5120-14-406-6554
Spanner Wrench

144066554
853-200-815-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-442-1522
Serre Toles Outil

144421522
853-600-254-6: RNCC: 3 | RNVC: 2

3 Oct 1990

5120-14-574-1993
Box Wrench

145741993
1-17-376: RNCC: 3 | RNVC: 2
E117376: RNCC: 5 | RNVC: 9

14 Dec 2012

5120-14-263-8838
Cle Speciale

142638838
17-9-1750: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-448-6549
Internal Gripping Pipe Wrench

144486549
9689160624: RNCC: 3 | RNVC: 2
9689160624: RNCC: 5 | RNVC: 2
91706351: RNCC: 5 | RNVC: 2

4 Jul 1991

5120-14-383-1505
Electrical Card Extractor

143831505
100422: RNCC: 3 | RNVC: 2

17 Mar 1983

5120-14-445-5377
Spanner Wrench

144455377
39442307: RNCC: 3 | RNVC: 2

14 Feb 1991

5120-14-394-9021
Socket Wrench Screwdriver Attachment

143949021
SM8: RNCC: 3 | RNVC: 2
3272670207783: RNCC: 5 | RNVC: 2

2 Oct 1984

5120-14-318-6250
Spanner Wrench

143186250
PR47586: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-442-6783
Spanner Wrench

144426783
OUT50367: RNCC: 3 | RNVC: 2
0UT50367: RNCC: 5 | RNVC: 2

24 Oct 1990

5120-14-422-2412
Socket Head Screw Key

144222412
0373-0U119526: RNCC: 3 | RNVC: 2

24 Feb 1988

5120-14-224-9918
Open End Wrench

142249918
10A67: RNCC: 3 | RNVC: 2
M6-054: RNCC: 5 | RNVC: 2

1 Jan 1966

5120-14-551-6305
Socket Head Screw Key

145516305
SW2F123-SG50-001: RNCC: 3 | RNVC: 2

10 Oct 2006

5120-14-517-9962
Six Point Tip Screwdriver

145179962
ENFD6577-55X175: RNCC: 3 | RNVC: 2

21 Jan 2000

5120-14-541-6745
Hand Pipe And Sewer Auger

145416745
2906 00: RNCC: 3 | RNVC: 2
673-579: RNCC: 5 | RNVC: 2

17 Jun 2004

5120-14-212-0060

5120-14-270-9311

5120-14-531-1206
Screwdriver Bit

145311206
EP.601T: RNCC: 3 | RNVC: 2
1112173L00: RNCC: 5 | RNVC: 2

24 Jul 2002

5120-14-548-4636
Pneumatic Tire Valve Core Inserter And Remover

145484636
MA000622: RNCC: 3 | RNVC: 2

19 Jan 2006

5120-14-435-9414
Spanner Wrench

144359414
16849889: RNCC: 3 | RNVC: 2
16849889: RNCC: 5 | RNVC: 9

29 Nov 1989

5120-14-303-2834
Spanner Wrench

143032834
000996005P: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-040-2933
Spanner Wrench

140402933
0616-78: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-535-2431
Spanner Wrench

145352431
6501COC101: RNCC: 3 | RNVC: 2

14 May 2003

5120-14-443-9387
Socket Head Screw Key

144439387
GS23 5/16: RNCC: 3 | RNVC: 2
GS100-05: RNCC: 5 | RNVC: 2

13 Dec 1990

5120-14-475-8954
Leveling-Support Jack

144758954
3636019: RNCC: 3 | RNVC: 2
18506862-9: RNCC: 5 | RNVC: 2
3636019: RNCC: 5 | RNVC: 2

10 May 1995

5120-14-425-6840
Preformed Packing Inserter

144256840
8813088000: RNCC: 3 | RNVC: 2

21 Jul 1988

5120-14-225-5616
Cle

142255616
GSM1727DET8: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-577-1864
Open End Box Wrench Set

145771864
MOD.43: RNCC: 3 | RNVC: 2
3148517321816: RNCC: 5 | RNVC: 2
732181: RNCC: 5 | RNVC: 2

21 Aug 2013

5120-14-533-1282
Electrical Contact Remover

145331282
DRK95S22M: RNCC: 3 | RNVC: 2

23 Jan 2003

5120-14-402-7937
Bearing And Bushing Inserter

144027937
3210-97-31-004: RNCC: 3 | RNVC: 2
85-692-9447: RNCC: 6 | RNVC: 9

19 Jul 1985

5120-14-537-6023
Combination Box And Open End Wrench

145376023
51A-10: RNCC: 3 | RNVC: 2

12 Nov 2003

5120-14-232-6817
Socket Wrench Extension

142326817
VLA: RNCC: 3 | RNVC: 2
A215: RNCC: 3 | RNVC: 2
V2-95-007: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-463-1429
Spanner Wrench

144631429
50403: RNCC: 3 | RNVC: 2
OU50403: RNCC: 5 | RNVC: 2
85-695-0313: RNCC: 6 | RNVC: 9

26 May 1993

5120-14-311-7452
Spanner Wrench

143117452
6800-1026: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-480-9009
Combination Box And Open End Wrench

144809009
GS130-28: RNCC: 3 | RNVC: 2

11 Apr 1996

5120-14-319-4533
Mechanical Puller Attachment

143194533
3130S95-68-016: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-323-1331
Open End Wrench

143231331
44.1'7/16X1'5/8: RNCC: 3 | RNVC: 2
SYB0325: RNCC: 5 | RNVC: 2
44-1 7-16X1 5-8: RNCC: 5 | RNVC: 2
44 1 7/16X1 5/8CP: RNCC: 5 | RNVC: 2
3148511049112: RNCC: 5 | RNVC: 2
44-1 7-16X1 5-8CP: RNCC: 5 | RNVC: 2
0104910: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-308-5690
Open End Wrench

143085690
E74302P7X8AS: RNCC: 2 | RNVC: 2
44.7X8: RNCC: 3 | RNVC: 2
91352358: RNCC: 5 | RNVC: 2
91369538: RNCC: 5 | RNVC: 2
250-4677: RNCC: 5 | RNVC: 2
3148511023716: RNCC: 5 | RNVC: 2
44-7X8: RNCC: 5 | RNVC: 2
0110734C00: RNCC: 5 | RNVC: 2
FACOM44.7X8: RNCC: 5 | RNVC: 9
0102370: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-417-4374
Leveling-Support Jack

144174374
NO PRIMARY REF14-417-4374: RNCC: 3 | RNVC: 2
89234689: RNCC: 5 | RNVC: 2
40-6-4A5-39: RNCC: 5 | RNVC: 9

8 Jul 1987

5120-14-456-7182
Sheet Metalworking Dolly Block

144567182
853-640-007-0: RNCC: 3 | RNVC: 2

24 Jul 1992

5120-14-373-8895
Screwdriver Bit

143738895
LC6: RNCC: 3 | RNVC: 2
LC-6: RNCC: 3 | RNVC: 2
91396438: RNCC: 5 | RNVC: 2
3272670284470: RNCC: 5 | RNVC: 2

8 Dec 1981

5120-14-292-7480
Torque Wrench Adapter

142927480
DC-0-3/8: RNCC: 3 | RNVC: 2
3272670256644: RNCC: 5 | RNVC: 2
DC03-8: RNCC: 5 | RNVC: 2
DC0 3-8: RNCC: 5 | RNVC: 2
85-598-8091: RNCC: 6 | RNVC: 9

1 Jan 1972

5120-14-349-8661
Spanner Wrench

143498661
0427-02005: RNCC: 3 | RNVC: 2

14 Jun 1978

5120-14-347-6450
Extracteur Fourreau

143476450
115753: RNCC: 3 | RNVC: 2
85-689-3529: RNCC: 6 | RNVC: 9

1 Mar 1978

5120-14-286-0131
Socket Head Screw Key

142860131
AW028: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-521-5307
Socket Wrench Socket

145215307
NKB.27: RNCC: 3 | RNVC: 2
NKB27: RNCC: 5 | RNVC: 2

9 Aug 2000

5120-14-430-2683
Hand Blind Riveter

144302683
0292310: RNCC: 3 | RNVC: 2
YNTS: RNCC: 5 | RNVC: 2

15 Mar 1989

5120-14-418-9969
Clef

144189969
27390649-0: RNCC: 3 | RNVC: 2

28 Sep 1987

5120-14-394-3347
Mechanical Puller Adapter

143943347
20196325-5: RNCC: 3 | RNVC: 2
20196325-5: RNCC: 5 | RNVC: 9

28 Aug 1984

5120-14-473-3131
Screwdriver Bit

144733131
ES.104,5: RNCC: 3 | RNVC: 2
ES.104,5: RNCC: 5 | RNVC: 2
ES104-5: RNCC: 5 | RNVC: 2
3148510245942: RNCC: 5 | RNVC: 2
1029276L00: RNCC: 5 | RNVC: 2
0024594: RNCC: 5 | RNVC: 9

13 Dec 1994

5120-14-552-8284
Socket Head Screw Key

145528284
83H.1/2: RNCC: 3 | RNVC: 2
83H.1/2: RNCC: 5 | RNVC: 2
3148511246214: RNCC: 5 | RNVC: 2

6 Feb 2007

5120-14-262-5586
Embout Pour Serrage

142625586
116454: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-269-4942

5120-14-250-0452

5120-14-266-6995

5120-14-574-5064
Socket Wrench Socket

145745064
S.18HLA: RNCC: 3 | RNVC: 2
054158: RNCC: 5 | RNVC: 2
3148510541587: RNCC: 5 | RNVC: 2
54158: RNCC: 5 | RNVC: 2

24 Jan 2013

5120-14-537-1287
Open End Wrench

145371287
17182: RNCC: 3 | RNVC: 2

1 Oct 2003

5120-14-209-4199
Flat Tip Screwdriver

142094199
FRP41: RNCC: 3 | RNVC: 2

1 Jan 1964

5120-14-224-7867
Hand Terminal Crimping Tool

142247867
8459: RNCC: 3 | RNVC: 2
91492563: RNCC: 5 | RNVC: 2

1 Jan 1966

5120-14-565-2325
Mechanical Puller Step Plate

145652325
MDN31A311103: RNCC: 3 | RNVC: 2

28 Jul 2010

5120-14-281-2968
Faux Mors Tige Cent

142812968
C46848: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-578-5207
Seal Inserter

145785207
OU300772: RNCC: 3 | RNVC: 2

9 Dec 2013

5120-14-223-4988

5120-14-562-6300
Seal Inserter

145626300
010-444-00826-101: RNCC: 3 | RNVC: 2

10 Nov 2009

5120-14-416-8898
Montage Support

144168898
NO PRIMARY REF14-416-8898: RNCC: 3 | RNVC: 2
OU140704: RNCC: 5 | RNVC: 9
0U140704: RNCC: 5 | RNVC: 9

25 Jun 1987

5120-14-497-7997
Outillage Pour Bagu

144977997
T60UT0034000: RNCC: 3 | RNVC: 2

20 Oct 1997

5120-14-412-0414
Centrage

144120414
DLP753905: RNCC: 3 | RNVC: 2

26 Sep 1986

5120-14-272-3727

5120-14-252-2754

5120-14-318-6455
Spanner Wrench

143186455
M0N20513: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-576-6250
Bearing And Bushing Inserter And Remover

145766250
8811405200: RNCC: 3 | RNVC: 2

1 Jul 2013

5120-14-277-0317

5120-14-466-8467
Socket Wrench Socket

144668467
39256742: RNCC: 3 | RNVC: 2
39256742: RNCC: 3 | RNVC: 9

3 Dec 1993

5120-14-576-2893
Inserter And Remove

145762893
8811288002: RNCC: 3 | RNVC: 2

11 Jun 2013

5120-14-250-0303
Open End Wrench

142500303
C58893: RNCC: 3 | RNVC: 2
100912: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-454-4704
Torque Wrench Adapter

144544704
M4HZ7101952320: RNCC: 3 | RNVC: 2

2 Apr 1992

5120-14-297-6229

5120-14-538-5004
Solid Center Punch

145385004
NGM0010038814811: RNCC: 2 | RNVC: 2

9 Dec 2003

5120-14-313-4681
Screwdriver Bit

143134681
AMR3: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-304-4463
Open End Wrench

143044463
09-13: RNCC: 3 | RNVC: 2
09-13: RNCC: 5 | RNVC: 2

1 Jan 1974

5120-14-441-1988
Terminal Crimping Tool Contact Positioner

144411988
R073015022: RNCC: 3 | RNVC: 2
91711047: RNCC: 5 | RNVC: 2
73015022: RNCC: 5 | RNVC: 9

22 Aug 1990

5120-14-552-8376
Adjustable Wrench

145528376
113.12TAVSE: RNCC: 3 | RNVC: 2
113.12TAVSE: RNCC: 5 | RNVC: 2
3148511326534: RNCC: 5 | RNVC: 2

7 Feb 2007

5120-14-267-6593
Socket Wrench Handle Bar

142676593
6040266: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-476-3048
Support Comparateur

144763048
9992479: RNCC: 3 | RNVC: 2
RAB3862: RNCC: 5 | RNVC: 2
9992479: RNCC: 5 | RNVC: 9

6 Jun 1995

5120-14-395-7227

5120-14-208-7300

5120-14-371-9912
Outil Arbre Distrib

143719912
25545907700: RNCC: 3 | RNVC: 2
255459077: RNCC: 5 | RNVC: 9

5 Aug 1981

5120-14-395-7165

5120-14-438-7631
Spanner Wrench

144387631
321A95-0022-00: RNCC: 3 | RNVC: 2

4 Apr 1990

5120-14-386-6783
Socket Wrench Crowfoot Attachment

143866783
853-100-068-0: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-205-8279
Pince A Couder Les

142058279
NO PRIMARY REF14-205-8279: RNCC: 3 | RNVC: 2
74658-9: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-207-5011
Cle Decrou De Croch

142075011
10-732-098: RNCC: 3 | RNVC: 2

1 Jan 1964

5120-14-405-4530
Pince Eq Arrache Jo

144054530
0-701829-2-2: RNCC: 3 | RNVC: 2
85-693-1474: RNCC: 6 | RNVC: 9

27 Nov 1985

5120-14-224-0713
Cle Speciale

142240713
80900-620: RNCC: 3 | RNVC: 2
79400-1: RNCC: 5 | RNVC: 2

1 Jan 1966

5120-14-323-2085

5120-14-248-1080

5120-14-247-9647
Cardan Cle A Douill

142479647
RT20564: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-338-1633
Douille-Tournevis

143381633
RD.1: RNCC: 3 | RNVC: 2
3148515134005: RNCC: 5 | RNVC: 2
RD1: RNCC: 5 | RNVC: 2
0513400: RNCC: 5 | RNVC: 9

6 Nov 1976

5120-14-366-5526
Cle Tournev Av Cale

143665526
16299895: RNCC: 3 | RNVC: 2
16299895: RNCC: 5 | RNVC: 9

20 Nov 1980

5120-14-204-0961

5120-14-247-3718
Bague Dappui Specia

142473718
PR46607: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-247-4510

5120-14-276-8119

5120-14-342-8765

5120-14-576-9681
Valve Tappet Adjusting Tool

145769681
1460.075: RNCC: 3 | RNVC: 2
5120MT0200286: RNCC: 6 | RNVC: 9

25 Jul 2013

5120-14-309-4804

5120-14-210-0384

5120-14-569-6054
Spanner Wrench

145696054
UFA33092: RNCC: 3 | RNVC: 2
14100081135: RNCC: 5 | RNVC: 2

4 Oct 2011

5120-14-497-4399
Cle

144974399
NO PRIMARY REF14-497-4399: RNCC: 3 | RNVC: 2
FZ84TC10: RNCC: 5 | RNVC: 9
F300 0T 023 1814: RNCC: 6 | RNVC: 9

15 Oct 1997

5120-14-340-8218
Open End Wrench

143408218
E74302S50X55AS: RNCC: 2 | RNVC: 1
70-50X55: RNCC: 3 | RNVC: 2
3272670221758: RNCC: 5 | RNVC: 2

14 Feb 1977

5120-14-327-4637
Open End Wrench

143274637
MAT196-0066F9: RNCC: 3 | RNVC: 2
MAT196-1234F8: RNCC: 3 | RNVC: 2
1872-10: RNCC: 5 | RNVC: 2

2 Jul 1975

5120-14-488-4858
Socket Wrench Extension

144884858
NP.250JC: RNCC: 3 | RNVC: 2
3148510413518: RNCC: 5 | RNVC: 2
NP-250JC: RNCC: 5 | RNVC: 2
NP250JC: RNCC: 5 | RNVC: 2
0041351: RNCC: 5 | RNVC: 9

14 May 1997

5120-14-486-5728
Jet Special

144865728
RT8075: RNCC: 3 | RNVC: 2

25 Mar 1997

5120-14-436-1588
Griffe Equipee

144361588
557932: RNCC: 3 | RNVC: 2

6 Dec 1989

5120-14-401-8571
Appareil De Calage

144018571
24545990000: RNCC: 3 | RNVC: 2
245459900: RNCC: 5 | RNVC: 9

13 Jun 1985

5120-14-272-5624

5120-14-225-4024

5120-14-232-9212
Outil Pour Position

142329212
51696: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-271-6113

5120-14-234-4287
Plateau De Contact

142344287
17908T1REP3: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-253-9734
Extracteur Special

142539734
A21871M2: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-219-2163

5120-14-219-2209

5120-14-473-2498
Screwdriver Bit

144732498
EH.104: RNCC: 3 | RNVC: 2
0023372: RNCC: 5 | RNVC: 2
3148510233727: RNCC: 5 | RNVC: 2
0111022F00: RNCC: 5 | RNVC: 2
91759698: RNCC: 5 | RNVC: 2

9 Dec 1994

5120-14-552-7427
Six Point Tip Screwdriver

145527427
ACZX.27X100: RNCC: 3 | RNVC: 2
ACZX.27X100: RNCC: 5 | RNVC: 2
3148516260468: RNCC: 5 | RNVC: 2

29 Jan 2007

5120-14-256-8115
Fixed Open End Wrench Set

142568115
44JN7: RNCC: 3 | RNVC: 2
205958: RNCC: 5 | RNVC: 2

1 Jan 1969

5120-14-413-4853
Body And Fender Spoon

144134853
894: RNCC: 3 | RNVC: 2
3148512129400: RNCC: 5 | RNVC: 2
2695 470 16: RNCC: 5 | RNVC: 2

17 Dec 1986

5120-14-404-5570
Spanner Wrench

144045570
CMA97002: RNCC: 3 | RNVC: 2
C7103: RNCC: 5 | RNVC: 2
C8590: RNCC: 5 | RNVC: 2
CMA90002: RNCC: 5 | RNVC: 2

20 Nov 1985

5120-14-270-8693
Socket Head Screw Key

142708693
202976: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-506-6159
Open End Wrench

145066159
NNP5120838365097: RNCC: 3 | RNVC: 9

29 Apr 1998

5120-14-429-2099
Spanner Wrench

144292099
11082: RNCC: 3 | RNVC: 2

11 Jan 1989

5120-14-415-0300
Socket Head Screw Key

144150300
96104091: RNCC: 3 | RNVC: 2
045U11-693859X: RNCC: 5 | RNVC: 1
96104091: RNCC: 5 | RNVC: 9

26 Mar 1987

5120-14-388-7938
Spanner Wrench

143887938
479308M: RNCC: 3 | RNVC: 2

29 Nov 1983

5120-14-406-0759
Face Spanner Wrench Socket

144060759
006155210M: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-440-7942
Spanner Wrench

144407942
45271620: RNCC: 3 | RNVC: 2
45271620: RNCC: 3 | RNVC: 9

25 Jul 1990

5120-14-488-9505
Face Spanner Wrench Socket

144889505
38152: RNCC: 3 | RNVC: 2

13 Jun 1997

5120-14-550-8830
Bearing And Bushing Inserter And Remover

145508830
8817236000: RNCC: 3 | RNVC: 2

26 Jul 2006

5120-14-043-0840
Valve Spring Lifter

140430840
DLP752980: RNCC: 3 | RNVC: 2

15 Sep 1983

5120-14-489-0310
Socket Head Screw Key

144890310
89.40L: RNCC: 3 | RNVC: 2
3148511268827: RNCC: 5 | RNVC: 2
0126882: RNCC: 5 | RNVC: 9

18 Jun 1997

5120-14-405-5074
Socket Wrench Socket

144055074
7297800: RNCC: 3 | RNVC: 2
72978: RNCC: 3 | RNVC: 9

27 Nov 1985

5120-14-432-8858
Open End Wrench

144328858
M4Z7101943020: RNCC: 3 | RNVC: 2

28 Jun 1989

5120-14-551-0067
Spanner Wrench

145510067
F47129: RNCC: 3 | RNVC: 2

18 Aug 2006

5120-14-427-4897
Flat Tip Screwdriver

144274897
ATH.6,5X100: RNCC: 3 | RNVC: 2
3148510115207: RNCC: 5 | RNVC: 2
ATH.6-5X100: RNCC: 5 | RNVC: 2
ATH6-5X100: RNCC: 5 | RNVC: 2
0115299K00: RNCC: 5 | RNVC: 2
0011520: RNCC: 5 | RNVC: 9

20 Oct 1988

5120-14-378-5128
Jet De Freinage

143785128
6801J32-1180-20: RNCC: 3 | RNVC: 2
6801360A32-1180-20: RNCC: 5 | RNVC: 2

11 Aug 1982

5120-14-402-8793
Boite A Graisse

144028793
NO PRIMARY REF14-402-8793: RNCC: 3 | RNVC: 2
20D3240A: RNCC: 5 | RNVC: 9

19 Jul 1985

5120-14-387-1651
De Montag Outillage

143871651
098032: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-427-1040
Metallique Jet

144271040
540751: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-219-2239

5120-14-244-4100

5120-14-537-7220
Open End Wrench

145377220
35.3,2: RNCC: 3 | RNVC: 2
AA011637: RNCC: 6 | RNVC: 9

19 Nov 2003

5120-14-556-9692
Clip Remover

145569692
1.505.1620.11: RNCC: 3 | RNVC: 2

24 Apr 2008

5120-14-291-8171

5120-14-559-8367
Torque Wrench

145598367
91711688: RNCC: 3 | RNVC: 2

23 Feb 2009

5120-14-565-2260
Socket Wrench Screwdriver Attachment

145652260
MDN300002: RNCC: 3 | RNVC: 2

28 Jul 2010

5120-14-280-2195

5120-14-286-7807

5120-14-493-0054
Cle

144930054
4065 030 000 784: RNCC: 3 | RNVC: 2
F300 0T 009 4399: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-253-2087

5120-14-369-4667
Hand Screw Jack Extension

143694667
CR0Q01MANSPHEX1073-1121: RNCC: 3 | RNVC: 2
CR0Q01MANSPHEX1073-1121: RNCC: 5 | RNVC: 2

17 Apr 1981

5120-14-329-3598
Cle Speciale

143293598
NO PRIMARY REF14-329-3598: RNCC: 3 | RNVC: 2
988-78: RNCC: 5 | RNVC: 9

2 Jul 1975

5120-14-297-6572
Cle Demontage Turbi

142976572
NO PRIMARY REF14-297-6572: RNCC: 3 | RNVC: 2
341191: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-386-1602
Bearing And Bushing Inserter

143861602
6801P33-1625-20: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-236-6003

5120-14-380-8386
Extracteur

143808386
C46497: RNCC: 3 | RNVC: 2

14 Dec 1982

5120-14-368-0566
Demonte Arbre Came

143680566
24545904600: RNCC: 3 | RNVC: 2
245459046: RNCC: 5 | RNVC: 9

19 Jan 1981

5120-14-367-6946
Poignee Demmancheme

143676946
8813456000: RNCC: 3 | RNVC: 2

19 Jan 1981

5120-14-271-0826
Broche Pliage De Pa

142710826
7M645: RNCC: 3 | RNVC: 2
MB1041: RNCC: 3 | RNVC: 2
06C151: RNCC: 5 | RNVC: 2
8057: RNCC: 5 | RNVC: 9
MB1041: RNCC: 5 | RNVC: 9

1 Jan 1970

5120-14-302-6527

5120-14-203-1381

5120-14-220-9402

5120-14-529-8676
Socket Wrench Socket Set

145298676
JH.40E: RNCC: 3 | RNVC: 2
3148515053207: RNCC: 5 | RNVC: 2

17 Apr 2002

5120-14-473-7772
Socket Wrench Screwdriver Attachment

144737772
0715 113 30: RNCC: 3 | RNVC: 2
3148510533902: RNCC: 5 | RNVC: 2
RXC.30: RNCC: 5 | RNVC: 2
0053390: RNCC: 5 | RNVC: 2

11 Jan 1995

5120-14-536-6722
Socket Wrench Adapter

145366722
45612865: RNCC: 3 | RNVC: 2

10 Sep 2003

5120-14-522-3851
Bearing Staking Installation Tool

145223851
TC3245G001: RNCC: 3 | RNVC: 2

25 Oct 2000

5120-14-408-4053
Slip Joint Pliers

144084053
131333: RNCC: 3 | RNVC: 2

19 Mar 1986

5120-14-511-3869
Socket Wrench Extension

145113869
SJ.215R: RNCC: 3 | RNVC: 2
3148510591179: RNCC: 5 | RNVC: 2
59117: RNCC: 5 | RNVC: 2

16 Dec 1998

5120-14-479-0369
Mechanical Puller Adapter

144790369
888-387-800-1: RNCC: 3 | RNVC: 2

6 Dec 1995

5120-14-525-9507
Six Point Tip Screwdriver

145259507
888-438-000-1: RNCC: 3 | RNVC: 2

20 Jun 2001

5120-14-487-5854
Inserted Hammer Face

144875854
320-C32N: RNCC: 3 | RNVC: 2
320C32N: RNCC: 3 | RNVC: 2
3272670209800: RNCC: 5 | RNVC: 2

10 Apr 1997

5120-14-274-8651
Pince-Joint

142748651
R31674-7-18REP5: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-453-7331
Vise Jaw Caps

144537331
NO PRIMARY REF14-453-7331: RNCC: 3 | RNVC: 2
89280924: RNCC: 5 | RNVC: 2
402-010-00400: RNCC: 5 | RNVC: 9

5 Mar 1992

5120-14-371-1771

5120-14-490-8660
Porte O

144908660
4051 160 004 155: RNCC: 3 | RNVC: 2
F300 0T 000 4897: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-315-1876
Outil De Repose Acc

143151876
0-79439-1-2: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-412-3105
Rivetage Outil

144123105
147100-78-1: RNCC: 3 | RNVC: 2

8 Oct 1986

5120-14-245-7909
Passe-Lacet Pour Dr

142457909
CH26: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-437-1801
Outil Special

144371801
8139: RNCC: 3 | RNVC: 2

22 Jan 1990

5120-14-530-6610
Outil Fixe-Vitre

145306610
ANP51M53-6A2: RNCC: 3 | RNVC: 2
SYB5301: RNCC: 5 | RNVC: 2

3 Jul 2002

5120-14-261-4640

5120-14-258-5052
Levier De Securite

142585052
20493: RNCC: 3 | RNVC: 2

1 Jan 1969

5120-14-227-3156
Grain

142273156
958689: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-225-4003

5120-14-401-9649
Demi-Bague

144019649
301A972305: RNCC: 3 | RNVC: 2
301A972305: RNCC: 5 | RNVC: 2
301A972305: RNCC: 5 | RNVC: 9
301A972305: RNCC: 5 | RNVC: 9

26 Jun 1985

5120-14-243-3670

5120-14-417-4065
Outil Pompe Huile

144174065
76545910300: RNCC: 3 | RNVC: 2
765459103: RNCC: 5 | RNVC: 9
N423880: RNCC: 5 | RNVC: 9

8 Jul 1987

5120-14-285-6289

5120-14-239-6378

5120-14-327-5005
Contre Clavette Sup

143275005
016-30-9003REP6: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-404-8662
Electrical Contact Remover

144048662
20300: RNCC: 3 | RNVC: 2

20 Nov 1985

5120-14-368-1862
Flat Tip Screwdriver Set

143681862
ATHH.J7: RNCC: 3 | RNVC: 2
91623419: RNCC: 5 | RNVC: 2
91745243: RNCC: 5 | RNVC: 2
3148515007132: RNCC: 5 | RNVC: 2
ATHHJS7: RNCC: 5 | RNVC: 2
0500713: RNCC: 5 | RNVC: 9

20 Feb 1981

5120-14-278-7832
Inserted Hammer Face

142787832
EB.25: RNCC: 3 | RNVC: 2
3148510222004: RNCC: 5 | RNVC: 2
EB25: RNCC: 5 | RNVC: 2
0022200: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-248-5165
Spanner Wrench

142485165
PR46103: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-549-4076
Wrench Extension Handle

145494076
1002592: RNCC: 3 | RNVC: 2

30 Mar 2006

5120-14-521-0553
Quick Adjusting Screw Clamp

145210553
272.1000L: RNCC: 3 | RNVC: 2
0695 949 100: RNCC: 5 | RNVC: 2

5 Jul 2000

5120-14-213-3787
Cle Reglage

142133787
1-1038-0240: RNCC: 3 | RNVC: 2
1-1038-02-40: RNCC: 5 | RNVC: 9
1-1038-02-40: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-440-5369
Bearing And Bushing Inserter And Remover

144405369
0-713458-1: RNCC: 3 | RNVC: 2
85-694-0206: RNCC: 6 | RNVC: 9

17 Jul 1990

5120-14-252-6663
Adjustable Wrench

142526663
105.230: RNCC: 3 | RNVC: 2
113-3: RNCC: 3 | RNVC: 2
3148511313206: RNCC: 5 | RNVC: 2
105-230: RNCC: 5 | RNVC: 2
M4ZS560D6053: RNCC: 5 | RNVC: 2
5053: RNCC: 5 | RNVC: 2
91463590: RNCC: 5 | RNVC: 2
M4ZS460D8109: RNCC: 5 | RNVC: 2
0131320: RNCC: 5 | RNVC: 9
106-230: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-386-6799
Universal Puller Kit

143866799
853-200-042-0: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-446-3132
Socket Wrench Handle Bar

144463132
VTR401-2-11454: RNCC: 3 | RNVC: 2

13 Mar 1991

5120-14-410-0641
Liaison Broche

144100641
853-202-369-0: RNCC: 3 | RNVC: 2

4 Jun 1986

5120-14-410-0628
Socket Wrench Crowfoot Attachment

144100628
853-100-206-0: RNCC: 3 | RNVC: 2

4 Jun 1986

5120-14-386-6742
Spanner Wrench

143866742
853-100-018-0: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-474-9118
Torque Wrench Adapter

144749118
12.19: RNCC: 3 | RNVC: 2
3148510929101: RNCC: 5 | RNVC: 2
12-19 9X12: RNCC: 5 | RNVC: 2
0092910: RNCC: 5 | RNVC: 9
F300 0T 018 2143: RNCC: 6 | RNVC: 9

8 Mar 1995

5120-14-469-0386
Craftsman's Tweezers

144690386
365C1: RNCC: 3 | RNVC: 2
365-C1: RNCC: 3 | RNVC: 2
3272670348257: RNCC: 5 | RNVC: 2

5 Apr 1994

5120-14-363-5007
Spanner Wrench

143635007
2310-03303: RNCC: 3 | RNVC: 2

9 May 1980

5120-14-466-9520
Pin Inserter And Remover

144669520
89425057: RNCC: 1 | RNVC: 2
0742185K00: RNCC: 3 | RNVC: 2
044U13-742185K: RNCC: 5 | RNVC: 9
89425057: RNCC: 5 | RNVC: 9

9 Dec 1993

5120-14-420-7237
Flat Tip Screwdriver

144207237
6512-58424: RNCC: 3 | RNVC: 2

16 Dec 1987

5120-14-260-2936
Poignee Pour Fraise

142602936
S16-0122-1200: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-237-4720
Detent Handling Tool

142374720
3130S95-68-034: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-419-7445
Remplissage Pompe

144197445
TH20M15: RNCC: 3 | RNVC: 2

5 Nov 1987

5120-14-446-7827
Socket Wrench Screwdriver Attachment

144467827
EX.255: RNCC: 3 | RNVC: 2
EX.255: RNCC: 5 | RNVC: 2
3148510258447: RNCC: 5 | RNVC: 2
1068067B00: RNCC: 5 | RNVC: 2

15 Apr 1991

5120-14-281-1892
Spanner Wrench

142811892
4616: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-429-1445
Spanner Wrench

144291445
537600: RNCC: 3 | RNVC: 2

11 Jan 1989

5120-14-457-4385
Face Spanner Wrench Socket

144574385
45057765: RNCC: 3 | RNVC: 2
45057765: RNCC: 5 | RNVC: 9

3 Sep 1992

5120-14-529-4548
Socket Head Screw Key

145294548
9401COE165: RNCC: 3 | RNVC: 2
9401COE165000: RNCC: 5 | RNVC: 2

29 Mar 2002

5120-14-319-1510

5120-14-430-5156
Hand Terminal Crimping Tool

144305156
E297: RNCC: 3 | RNVC: 2

22 Mar 1989

5120-14-392-4542
Bague Dextracteur

143924542
ST219: RNCC: 3 | RNVC: 9

21 Mar 1984

5120-14-436-0230
Preformed Packing Inserter

144360230
807633: RNCC: 3 | RNVC: 2

29 Nov 1989

5120-14-568-5673
Bearing And Bushing Inserter And Remover

145685673
F27317000: RNCC: 3 | RNVC: 2
F27317000: RNCC: 5 | RNVC: 2

21 Jun 2011

5120-14-388-6590
Mandrin Emmanche Si

143886590
DLP752880: RNCC: 3 | RNVC: 2

3 Nov 1983

5120-14-301-9102
Pliers

143019102
285: RNCC: 3 | RNVC: 2
1430: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-374-2031
Electrical Card Extractor

143742031
AZ12519: RNCC: 3 | RNVC: 2
AZ12519: RNCC: 5 | RNVC: 9

8 Dec 1981

5120-14-524-4197
Spanner Wrench

145244197
Q47804: RNCC: 3 | RNVC: 2

16 Mar 2001

5120-14-286-6573
Spanner Wrench

142866573
MZ135: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-488-6837
Seal Inserter And Remover

144886837
257074670: RNCC: 3 | RNVC: 2

28 May 1997

5120-14-374-8334
Socket Head Screw Key

143748334
046201317: RNCC: 3 | RNVC: 9
46201317: RNCC: 5 | RNVC: 2

30 Jan 1982

5120-14-375-5673

5120-14-291-8179

5120-14-506-1299
Axe De Serrage

145061299
98250243011: RNCC: 3 | RNVC: 2

7 Apr 1998

5120-14-233-4392

5120-14-245-0061
Cle Speciale

142450061
NO PRIMARY REF14-245-0061: RNCC: 3 | RNVC: 2
MLE1937M205A: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-352-3164
Montage Joint Obus

143523164
MGE288-24: RNCC: 3 | RNVC: 2
MGE288-24: RNCC: 5 | RNVC: 2

16 Oct 1978

5120-14-234-4302
Embout

142344302
940844: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-206-0030

5120-14-553-5753
Outil Applicateur

145535753
380150150: RNCC: 3 | RNVC: 2
PISTOLET DS 53: RNCC: 5 | RNVC: 2

18 Apr 2007

5120-14-559-6068
Mechanical Puller

145596068
8816012000: RNCC: 3 | RNVC: 2

2 Feb 2009

5120-14-221-8834
Pince Pose Degivreu

142218834
6477: RNCC: 3 | RNVC: 9

1 Jan 1966

5120-14-575-5971
Retaining Ring Pliers Set

145755971
MOD.PC: RNCC: 3 | RNVC: 2
3148518346894: RNCC: 5 | RNVC: 2
834689: RNCC: 5 | RNVC: 2

17 Apr 2013

5120-14-559-6428
Seal Inserter

145596428
99346259: RNCC: 3 | RNVC: 2

4 Feb 2009

5120-14-558-3243
Screwdriver Bit

145583243
AMZ.B2-3: RNCC: 3 | RNVC: 9

22 Sep 2008

5120-14-490-6953
Hammer

144906953
241 H 00521 000: RNCC: 3 | RNVC: 2
F300 0T 000 1089: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-242-4636

5120-14-253-3811
Tirant Special

142533811
T0553BBC7APC1: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-222-6189

5120-14-345-9351

5120-14-460-4157
Flat Tip Screwdriver Set

144604157
0500310: RNCC: 3 | RNVC: 2
AC.J8: RNCC: 5 | RNVC: 2

25 Jan 1993

5120-14-266-1707
Socket Head Screw Key

142661707
58: RNCC: 3 | RNVC: 2
3599028: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-310-2648

5120-14-225-5414
Extracteur Special

142255414
NO PRIMARY REF14-225-5414: RNCC: 3 | RNVC: 2
12B8002: RNCC: 5 | RNVC: 9

1 Jan 1966

5120-14-433-6329
Socket Head Screw Key

144336329
6269-59035: RNCC: 3 | RNVC: 2

2 Aug 1989

5120-14-259-5020
Spanner Wrench

142595020
NO PRIMARY REF14-259-5020: RNCC: 3 | RNVC: 2
K7-3: RNCC: 5 | RNVC: 9

1 Jan 1969

5120-14-219-0784
Cle A Tube

142190784
536-441-093: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-530-2090
Socket Head Screw Key

145302090
83SH.3/32: RNCC: 3 | RNVC: 2
3148511238516: RNCC: 5 | RNVC: 2

22 May 2002

5120-14-377-2787
Spanner Wrench

143772787
TMY20-32-507: RNCC: 3 | RNVC: 2

17 May 1982

5120-14-489-0302
Open End Wrench

144890302
NO PRIMARY REF14-489-0302: RNCC: 3 | RNVC: 2
91352533: RNCC: 5 | RNVC: 2
0102395: RNCC: 5 | RNVC: 2

18 Jun 1997

5120-14-439-7787
Bearing And Bushing Inserter

144397787
6801E33-9909-00: RNCC: 3 | RNVC: 2

23 May 1990

5120-14-429-1858
Bati Tourn Supp Mot

144291858
CESRA406-80-22: RNCC: 3 | RNVC: 2

11 Jan 1989

5120-14-243-3516
Poincon Monte Conne

142433516
8459-128: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-286-1493
Jeu De Cles Cannele

142861493
NO PRIMARY REF14-286-1493: RNCC: 3 | RNVC: 2
6469-010: RNCC: 5 | RNVC: 9
06469-010: RNCC: 5 | RNVC: 9
06469-10: RNCC: 5 | RNVC: 9
00-970-8947: RNCC: 6 | RNVC: 9

1 Jan 1972

5120-14-490-8733
Cle A Four

144908733
4065 030 000 282: RNCC: 3 | RNVC: 2
F300 0T 000 4976: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-532-2520
Socket Wrench Socket

145322520
R.13E: RNCC: 3 | RNVC: 2
1076989Q00: RNCC: 5 | RNVC: 2

23 Oct 2002

5120-14-281-2990
Cle A Creneaux Racc

142812990
C46941: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-245-2339

5120-14-232-9942
Tete De Sertisseur

142329942
69066: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-397-4852
Montage Pour Soudur

143974852
73015021: RNCC: 3 | RNVC: 2

14 Dec 1984

5120-14-571-2483
Socket Wrench Socket

145712483
K.42HB: RNCC: 3 | RNVC: 2
3148516601216: RNCC: 5 | RNVC: 2
660121: RNCC: 5 | RNVC: 2

6 Mar 2012

5120-14-472-1656
Ring Retaining Pliers Tip Set

144721656
2928-1: RNCC: 3 | RNVC: 2

12 Oct 1994

5120-14-248-5647

5120-14-042-3241
Jeu De 8 Cles A 6 P

140423241
82-1,5-2-2,5-3-4-5-6-8: RNCC: 3 | RNVC: 2
JEU8CLES6PANS: RNCC: 3 | RNVC: 2
958 043 600 000: RNCC: 6 | RNVC: 9

16 May 1977

5120-14-348-4572
Screwdriver Bit

143484572
155-1: RNCC: 3 | RNVC: 2
166-8: RNCC: 3 | RNVC: 2
586-8: RNCC: 3 | RNVC: 2
965LI0N1: RNCC: 5 | RNVC: 2
965LI0N1: RNCC: 5 | RNVC: 9

29 Mar 1978

5120-14-407-1485
Open End Wrench

144071485
F52219-2: RNCC: 3 | RNVC: 2

12 Feb 1986

5120-14-279-9264
Spanner Wrench

142799264
77581-1: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-530-2030
Socket Wrench Handle

145302030
R.222: RNCC: 3 | RNVC: 2
3148510527000: RNCC: 5 | RNVC: 2

22 May 2002

5120-14-400-0658
Pliers

144000658
8-1513: RNCC: 3 | RNVC: 2
131191: RNCC: 5 | RNVC: 2

24 Apr 1985

5120-14-503-0838
Flat Tip Screwdriver

145030838
876200: RNCC: 3 | RNVC: 2

7 Jan 1998

5120-14-436-0222
Preformed Packing Inserter

144360222
807616: RNCC: 3 | RNVC: 2

29 Nov 1989

5120-14-506-9672
Socket Head Screw Key

145069672
84TC.5: RNCC: 3 | RNVC: 2
84TC.5: RNCC: 5 | RNVC: 2
0125584: RNCC: 5 | RNVC: 2
3148511255841: RNCC: 5 | RNVC: 2
1069677T00: RNCC: 5 | RNVC: 2
FZ84TC5: RNCC: 5 | RNVC: 9
F300 0T 023 1811: RNCC: 6 | RNVC: 9

27 May 1998

5120-14-421-3526
Spanner Wrench

144213526
540393: RNCC: 3 | RNVC: 2
89414964: RNCC: 5 | RNVC: 2
00540393: RNCC: 5 | RNVC: 2

14 Jan 1988

5120-14-431-7313
Hand Abrasive Wheel Dresser

144317313
52455000: RNCC: 3 | RNVC: 2

9 May 1989

5120-14-429-9477
Bearing And Bushing Inserter

144299477
007244080P: RNCC: 3 | RNVC: 2

20 Feb 1989

5120-14-463-5410
Face Spanner Wrench Socket

144635410
M0FA4900456: RNCC: 3 | RNVC: 2

17 Jun 1993

5120-14-374-6870
Spanner Wrench

143746870
A33140W: RNCC: 3 | RNVC: 2

30 Jan 1982

5120-14-451-0968
Pince-Laser

144510968
BJM02666: RNCC: 3 | RNVC: 2

30 Oct 1991

5120-14-409-5144
Releve Cote Outill

144095144
8814457000: RNCC: 3 | RNVC: 2

28 May 1986

5120-14-314-4363
Socket Head Screw Key

143144363
24C9106: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-416-6447
Socket Head Screw Key

144166447
27402589-3: RNCC: 3 | RNVC: 2

23 Jun 1987

5120-14-473-3128
Socket Wrench Screwdriver Attachment

144733128
0022758: RNCC: 3 | RNVC: 2
EF.L5,5: RNCC: 5 | RNVC: 2
EFL5-5: RNCC: 5 | RNVC: 2
91729455: RNCC: 5 | RNVC: 2

13 Dec 1994

5120-14-299-2995
Spanner Wrench

142992995
28182-1: RNCC: 3 | RNVC: 2
28182-1: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-427-2492
Spanner Wrench

144272492
488402M354-06P81: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-416-7664
Mandrin Presse

144167664
540697: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-573-8698
Cross Tip Screwdriver

145738698
AP.2X125AVSE: RNCC: 3 | RNVC: 2

16 Nov 2012

5120-14-255-0922

5120-14-478-5843
Montage Cone

144785843
100-565: RNCC: 3 | RNVC: 2

8 Nov 1995

5120-14-328-1542

5120-14-262-5565
Outillage De Rodage

142625565
R0D17121: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-316-1598
Pliers

143161598
A132413: RNCC: 3 | RNVC: 2
100751: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-542-9431
Seal Inserter And Remover

145429431
8360044: RNCC: 3 | RNVC: 2
8360044: RNCC: 5 | RNVC: 2

14 Aug 2004

5120-14-450-6794
Tap And Reamer Wrench

144506794
Z1211F: RNCC: 3 | RNVC: 2
91613730: RNCC: 5 | RNVC: 2

16 Oct 1991

5120-14-526-7686
Wrench Extension Handle

145267686
0457689X00: RNCC: 3 | RNVC: 2

5 Sep 2001

5120-14-263-8200

5120-14-292-7008

5120-14-242-3176

5120-14-484-6522
Socket Wrench Socket

144846522
R.9LA: RNCC: 3 | RNVC: 2
235-3996: RNCC: 5 | RNVC: 2
3148510512952: RNCC: 5 | RNVC: 2
0051295: RNCC: 5 | RNVC: 9
FACOMR.9LA: RNCC: 5 | RNVC: 9

28 Nov 1996

5120-14-325-4758
Positio Serti Conta

143254758
8340-765: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-492-7376
Cliquet

144927376
NO PRIMARY REF14-492-7376: RNCC: 3 | RNVC: 2
1235A107: RNCC: 5 | RNVC: 9
F300 0T 008 6902: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-561-1322
Socket Wrench

145611322
MOD.97: RNCC: 3 | RNVC: 2
3148517333789: RNCC: 3 | RNVC: 2
733378: RNCC: 5 | RNVC: 2

18 Jun 2009

5120-14-429-9850
Cross Tip Screwdriver

144299850
AP.1X100: RNCC: 3 | RNVC: 2
0115266Q00: RNCC: 5 | RNVC: 2
39511931: RNCC: 5 | RNVC: 2
0008820: RNCC: 5 | RNVC: 2
3148510088204: RNCC: 5 | RNVC: 2
AP1X100: RNCC: 5 | RNVC: 2
91313178: RNCC: 5 | RNVC: 2
91634272: RNCC: 5 | RNVC: 2
AP1: RNCC: 5 | RNVC: 9
16400039-8: RNCC: 5 | RNVC: 9

22 Feb 1989

5120-14-326-7519
Combination Box And Open End Wrench

143267519
ECHC87-2-2: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-200-9331
Socket Wrench Socket

142009331
S.7/8: RNCC: 3 | RNVC: 2
3148510545202: RNCC: 5 | RNVC: 2
S7-8: RNCC: 5 | RNVC: 2
0054520: RNCC: 5 | RNVC: 9

1 Jan 1962

5120-14-247-9636
Cle A Oeil

142479636
RT20785: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-249-9469

5120-14-342-7350

5120-14-431-7944
Verin Etrier

144317944
47471: RNCC: 3 | RNVC: 2

10 May 1989

5120-14-330-0782

5120-14-272-3749

5120-14-368-4028
Equipe Guignol

143684028
MKM0436600: RNCC: 3 | RNVC: 2
MKM0436600: RNCC: 5 | RNVC: 2

20 Feb 1981

5120-14-209-5136
Cle De Serrage Tuli

142095136
MS058: RNCC: 3 | RNVC: 2
MS058: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-382-1845
Cle Embout Special

143821845
990396: RNCC: 3 | RNVC: 2
990396: RNCC: 5 | RNVC: 9

25 Jan 1983

5120-14-238-5142
Socket Head Screw Key

142385142
929-50-122: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-517-1766
Socket Wrench Adapter

145171766
G040Z010-000-0011: RNCC: 3 | RNVC: 2

15 Nov 1999

5120-14-278-1836
Broche Eclipse Poul

142781836
PA467-15A2P38: RNCC: 3 | RNVC: 9

1 Jan 1971

5120-14-399-3358
Montage Bague

143993358
MGF447-22: RNCC: 3 | RNVC: 2

6 Mar 1985

5120-14-280-1430

5120-14-427-1108
Mandrin Presse

144271108
547876: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-570-2458
Face Spanner Wrench Socket

145702458
UFA31539: RNCC: 3 | RNVC: 2

1 Dec 2011

5120-14-420-6706
Arrache Pique Pince

144206706
131923N2: RNCC: 3 | RNVC: 2

16 Dec 1987

5120-14-225-5583
Extracteur Pour Che

142255583
31228: RNCC: 3 | RNVC: 2
31228A: RNCC: 5 | RNVC: 2

1 Jan 1966

5120-14-352-2782

5120-14-339-0575

5120-14-462-0579
Alignement Tige

144620579
512833PTRAM2: RNCC: 3 | RNVC: 2
512833P: RNCC: 5 | RNVC: 2

31 Mar 1993

5120-14-219-2211

5120-14-556-9191
Box Wrench

145569191
145519259: RNCC: 3 | RNVC: 2

22 Apr 2008

5120-14-392-5799
Spanner Wrench

143925799
CMT30E9005PL8REP6: RNCC: 3 | RNVC: 2

21 Mar 1984

5120-14-347-5040
Electrical Contact Inserter

143475040
R282921: RNCC: 3 | RNVC: 2
91382649: RNCC: 5 | RNVC: 2

1 Mar 1978

5120-14-510-7163
Socket Wrench Screwdriver Attachment

145107163
ST6EL2: RNCC: 3 | RNVC: 2

9 Nov 1998

5120-14-419-7279
Socket Wrench Socket

144197279
004861: RNCC: 3 | RNVC: 2
4861: RNCC: 5 | RNVC: 2

5 Nov 1987

5120-14-217-2785

5120-14-437-3579
Spanner Wrench

144373579
J00650-01S140P020: RNCC: 3 | RNVC: 2

30 Jan 1990

5120-14-517-9943
Six Point Tip Screwdriver

145179943
ENFD6577-10X70: RNCC: 3 | RNVC: 2

21 Jan 2000

5120-14-510-7133
Flat Tip Screwdriver

145107133
CK4735-75X2-8: RNCC: 3 | RNVC: 2

9 Nov 1998

5120-14-329-6391
Spanner Wrench

143296391
MHJ100-21: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-528-4692
Drift

145284692
888-468-300-1: RNCC: 3 | RNVC: 2
888-468-300-1: RNCC: 5 | RNVC: 2

30 Jan 2002

5120-14-488-3025
Open End Wrench

144883025
10-15X17-P: RNCC: 3 | RNVC: 2
10-15X17P: RNCC: 5 | RNVC: 2
3272670281561: RNCC: 5 | RNVC: 2

29 Apr 1997

5120-14-514-9406
Socket Wrench Handle

145149406
M3036-10: RNCC: 3 | RNVC: 2
M3036.10: RNCC: 5 | RNVC: 2
M3-036-10: RNCC: 5 | RNVC: 2

23 Jun 1999

5120-14-370-8872
Spanner Wrench

143708872
6801R32-1029-20: RNCC: 3 | RNVC: 2
6801366A32-1029-20: RNCC: 5 | RNVC: 2

5 Jun 1981

5120-14-332-3829
Face Spanner Wrench Socket

143323829
M31-047: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-389-8511
Spanner Wrench

143898511
M16-150: RNCC: 3 | RNVC: 2

20 Dec 1983

5120-14-311-4541
Bearing And Bushing Inserter And Remover

143114541
3160S95-33-142: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-270-7140
Fixed Open End Wrench Set

142707140
9531JEU7CLESPLATES: RNCC: 2 | RNVC: 2
NO PRIMARY REF14-270-7140: RNCC: 3 | RNVC: 2
9531JEU7CLESPLATES: RNCC: 5 | RNVC: 9

1 Jan 1970

5120-14-397-8221
Screwdriver Bit

143978221
AM-6MM: RNCC: 3 | RNVC: 2
APEX-AM-6MM: RNCC: 5 | RNVC: 9

31 Jan 1985

5120-14-421-6295
Open End Wrench

144216295
210013: RNCC: 3 | RNVC: 2

20 Jan 1988

5120-14-576-6125
Mechanical Puller S

145766125
8810499203: RNCC: 3 | RNVC: 2

1 Jul 2013

5120-14-461-0105
Cle Serrage Angulai

144610105
D.360A: RNCC: 3 | RNVC: 2
91739559: RNCC: 5 | RNVC: 2
3148510197234: RNCC: 5 | RNVC: 2
D.360: RNCC: 5 | RNVC: 9
0019723: RNCC: 5 | RNVC: 9
D360: RNCC: 5 | RNVC: 9

17 Feb 1993

5120-14-317-0683
Balancier A Vis

143170683
118700: RNCC: 3 | RNVC: 9

21 Feb 1996

5120-14-561-1769
Combination Box And Open End Wrench

145611769
440.7: RNCC: 3 | RNVC: 2
3148517679498: RNCC: 5 | RNVC: 2
767949: RNCC: 5 | RNVC: 2

23 Jun 2009

5120-14-248-5412
Rallonge

142485412
PR46151: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-317-0424
Spanner Wrench

143170424
RT5162: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-501-5559
Pliers

145015559
05995001: RNCC: 3 | RNVC: 2
5995001: RNCC: 5 | RNVC: 9

4 Nov 1997

5120-14-384-6300
Electrical Card Extractor

143846300
16928950: RNCC: 3 | RNVC: 2
16928950: RNCC: 5 | RNVC: 9

2 Jun 1983

5120-14-329-8894
Open End Wrench

143298894
426498: RNCC: 3 | RNVC: 2
GC1016: RNCC: 5 | RNVC: 2

2 Jul 1975

5120-14-555-0253
Socket Head Screw Key

145550253
14100010480: RNCC: 3 | RNVC: 2

20 Sep 2007

5120-14-375-1213
Electrical Contact Inserter

143751213
11911: RNCC: 3 | RNVC: 2

30 Jan 1982

5120-14-416-7638
Mandrin Presse

144167638
540389: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-422-0377
Broche

144220377
2-28902: RNCC: 3 | RNVC: 2

17 Feb 1988

5120-14-578-4720
Mechanical Puller S

145784720
8813420001: RNCC: 3 | RNVC: 2

3 Dec 2013

5120-14-241-6039

5120-14-429-1547
Outillage Simbleau

144291547
530553: RNCC: 3 | RNVC: 2

11 Jan 1989

5120-14-336-3366
Demi-Bag Montag Bag

143363366
RK5939REPM: RNCC: 3 | RNVC: 2

24 Jul 1976

5120-14-331-4228

5120-14-491-0206
Necessa

144910206
4602 010 600 001: RNCC: 3 | RNVC: 2
F300 0T 001 1001: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-570-2279
Bearing And Bushing Inserter

145702279
UFA31598: RNCC: 3 | RNVC: 2

30 Nov 2011

5120-14-263-2662

5120-14-313-7290

5120-14-400-4659
Screwdriver Bit

144004659
0007098: RNCC: 3 | RNVC: 2
AMC-S4: RNCC: 5 | RNVC: 2
AMC.S4: RNCC: 5 | RNVC: 2

24 Apr 1985

5120-14-388-5255
Flat Tip Screwdriver

143885255
NO PRIMARY REF14-388-5255: RNCC: 3 | RNVC: 2
0449-970: RNCC: 5 | RNVC: 2
0449-970: RNCC: 5 | RNVC: 9

3 Nov 1983

5120-14-376-7755
Ense Cle De Reglage

143767755
NO PRIMARY REF14-376-7755: RNCC: 3 | RNVC: 2
225723: RNCC: 5 | RNVC: 9

28 Apr 1982

5120-14-573-3818
Torque Wrench

145733818
M500N: RNCC: 3 | RNVC: 2

9 Oct 2012

5120-14-578-2576
Combination Box And Open End Wrench

145782576
67F.11: RNCC: 3 | RNVC: 2
3148517841161: RNCC: 5 | RNVC: 2

15 Nov 2013

5120-14-559-2238
Socket Wrench

145592238
5010465861: RNCC: 3 | RNVC: 2

15 Dec 2008

5120-14-253-9730
Cone De Guidage

142539730
C46287: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-428-5242
Comparateur Touche

144285242
MJF3712103: RNCC: 3 | RNVC: 2

8 Dec 1988

5120-14-345-0347
Tournevis De Reglag

143450347
002308005P: RNCC: 3 | RNVC: 2

5 Oct 1977

5120-14-280-1410

5120-14-214-8309

5120-14-296-9929

5120-14-253-9740
Douille A Ergots Eq

142539740
PR46827: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-262-5553
Guide Pour Montage

142625553
M0NT16898-3: RNCC: 3 | RNVC: 2
M0N16898-3: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-222-6171
Socket Wrench Socket

142226171
J.7/8: RNCC: 3 | RNVC: 2
3148510278605: RNCC: 5 | RNVC: 2
J7-8: RNCC: 5 | RNVC: 2
A7-8: RNCC: 5 | RNVC: 2
0027860: RNCC: 5 | RNVC: 9

1 Jan 1966

5120-14-575-0667
Mechanical Puller S

145750667
8813607002: RNCC: 3 | RNVC: 2

12 Mar 2013

5120-14-349-1150
Retaining Ring Pliers

143491150
177-34: RNCC: 3 | RNVC: 2

19 Apr 1978

5120-14-236-6006

5120-14-258-5976

5120-14-560-8811
Cross Tip Screwdriver

145608811
AP2X125VE: RNCC: 3 | RNVC: 2
3148517747432: RNCC: 5 | RNVC: 2

28 May 2009

5120-14-417-4617
Maintien Outil

144174617
1764660: RNCC: 3 | RNVC: 9

8 Jul 1987

5120-14-451-0466
Outil Serrage Injec

144510466
02240903200: RNCC: 3 | RNVC: 2
111450-00: RNCC: 5 | RNVC: 2

28 Oct 1991

5120-14-431-7850
Socket Head Screw Key

144317850
0453-6089910: RNCC: 3 | RNVC: 2

10 May 1989

5120-14-546-2223
Terminal Crimping Tool Contact Positioner

145462223
32001: RNCC: 3 | RNVC: 2

15 Jun 2005

5120-14-411-9443
Mechanical Puller Attachment

144119443
M4Z7101965701: RNCC: 3 | RNVC: 2

19 Sep 1986

5120-14-386-4848
Face Spanner Wrench Socket

143864848
D46931: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-361-3705
Pliers

143613705
460: RNCC: 3 | RNVC: 2

24 Jan 1980

5120-14-489-3186
Open End Wrench

144893186
10225808: RNCC: 3 | RNVC: 2

9 Jul 1997

5120-14-479-4358
Spanner Wrench

144794358
508258: RNCC: 3 | RNVC: 2
508258: RNCC: 5 | RNVC: 2
508258: RNCC: 5 | RNVC: 9

10 Jan 1996

5120-14-488-3117
Socket Head Screw Key

144883117
82H.4,5: RNCC: 3 | RNVC: 2
0123046: RNCC: 5 | RNVC: 2
3148511230466: RNCC: 5 | RNVC: 2
82H4-5: RNCC: 5 | RNVC: 2
235-2921: RNCC: 5 | RNVC: 2
FACOM82H.4,5: RNCC: 5 | RNVC: 9

30 Apr 1997

5120-14-415-1072
Cle Ecrou Charniere

144151072
7M419: RNCC: 3 | RNVC: 2

1 Apr 1987

5120-14-416-7612
Speciale Cle

144167612
537492: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-262-5558
Demi Coquille

142625558
M0NT17466: RNCC: 3 | RNVC: 2
M0N17466: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-238-6652

5120-14-494-1082
Spring Inserter And Remover

144941082
TB2040203: RNCC: 3 | RNVC: 2
700003: RNCC: 5 | RNVC: 9
F300 0T 015 4797: RNCC: 6 | RNVC: 9

15 Oct 1997

5120-14-427-2035
Extracteur Etrier

144272035
46AM011-01-0001: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-216-4126
Rallonge Speciale

142164126
M3-030-20: RNCC: 3 | RNVC: 2
M3-030-20: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-486-4456
Cle Speciale

144864456
RT13622: RNCC: 3 | RNVC: 2

21 Mar 1997

5120-14-232-3107

5120-14-261-7661

5120-14-566-5076
Socket Head Screw Key

145665076
AWSH4X75: RNCC: 3 | RNVC: 2
3148517745087: RNCC: 5 | RNVC: 2
0774508: RNCC: 5 | RNVC: 2

22 Nov 2010

5120-14-348-9262

5120-14-578-3575
Ratchet Wrench

145783575
J-150-A: RNCC: 3 | RNVC: 2

22 Nov 2013

5120-14-241-6031

5120-14-344-3882

5120-14-234-3563

5120-14-234-3458
Extracteur

142343458
BAT: RNCC: 3 | RNVC: 2
ZINBAT: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-263-1178
Arrache Chemise

142631178
7-010204-6: RNCC: 3 | RNVC: 2
0UT2054: RNCC: 5 | RNVC: 9
7-010204-6: RNCC: 5 | RNVC: 9

1 Jan 1970

5120-14-559-3407
Mechanical Puller

145593407
82127999003: RNCC: 3 | RNVC: 2

18 Dec 2008

5120-14-302-7754
Cross Tip Screwdriver Set

143027754
AS.4: RNCC: 3 | RNVC: 2
3148515006159: RNCC: 5 | RNVC: 2
AS4: RNCC: 5 | RNVC: 2
0500615: RNCC: 5 | RNVC: 9
502060AS4: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-523-0823
Socket Wrench Socket

145230823
8018790P00: RNCC: 3 | RNVC: 2

20 Dec 2000

5120-14-255-2932

5120-14-471-0841
Cle Pour Ecrou Ipd

144710841
3424548: RNCC: 3 | RNVC: 2
RAB3414: RNCC: 5 | RNVC: 2

26 Jul 1994

5120-14-378-5602
Mechanical Puller Attachment

143785602
360A93-3400-20: RNCC: 3 | RNVC: 2

11 Aug 1982

5120-14-437-0686
Montage Frein Outil

144370686
11213: RNCC: 3 | RNVC: 2

17 Jan 1990

5120-14-224-5235

5120-14-237-3357
Tige Dextraction

142373357
H90R1013: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-430-7495
Open End Wrench

144307495
68506-513-2: RNCC: 3 | RNVC: 9

22 Mar 1989

5120-14-200-9462
Open End Wrench

142009462
44 1 3-8X1 7-16CP: RNCC: 3 | RNVC: 2
33-1-3-8-1-7-16: RNCC: 5 | RNVC: 2
44S1 3-8X1 7-16: RNCC: 5 | RNVC: 2

1 Jan 1962

5120-14-288-6980
Bearing And Bushing Inserter And Remover

142886980
D1553-4822: RNCC: 3 | RNVC: 2
D1553-4822: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-372-7634
Obus Demmanchement

143727634
3180S95-33-036: RNCC: 3 | RNVC: 2
3180-95-33-036: RNCC: 5 | RNVC: 2

21 Sep 1981

5120-14-275-8976
Hand Fire Shovel

142758976
E78-002-300: RNCC: 2 | RNVC: 2

1 Jan 1971

5120-14-578-4359
Ratchet Wrench

145784359
J.151AVSE: RNCC: 3 | RNVC: 2
A06909196: RNCC: 5 | RNVC: 2
Y00015147: RNCC: 5 | RNVC: 2
3148510286396: RNCC: 5 | RNVC: 2

29 Nov 2013

5120-14-576-3028
Mechanical Puller S

145763028
8811426001: RNCC: 3 | RNVC: 2

11 Jun 2013

5120-14-259-4861
Cle Speciale

142594861
21144006000: RNCC: 3 | RNVC: 2
144HL60: RNCC: 5 | RNVC: 9

1 Jan 1969

5120-14-322-9884

5120-14-436-0242
Preformed Packing Inserter

144360242
807661: RNCC: 3 | RNVC: 2

29 Nov 1989

5120-14-481-5312
Screwdriver Bit

144815312
MOK 22852: RNCC: 3 | RNVC: 2
1120533L00: RNCC: 5 | RNVC: 2

16 May 1996

5120-14-224-8028
Open End Wrench

142248028
18A8X10: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-384-6338
Electrical Card Extractor

143846338
16928925: RNCC: 3 | RNVC: 2
16928925: RNCC: 5 | RNVC: 9

2 Jun 1983

5120-14-427-0600
Socket Wrench Extension

144270600
M4Z6021901701: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-546-0417
Combination Box And Open End Wrench

145460417
40.35LA: RNCC: 3 | RNVC: 2
40.35LA: RNCC: 5 | RNVC: 2

7 Jun 2005

5120-14-426-1109
Spanner Wrench

144261109
8815018000: RNCC: 3 | RNVC: 2

4 Aug 1988

5120-14-315-1883
Outil Rodage Joint

143151883
0-79617: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-040-1997
Spanner Wrench

140401997
NO PRIMARY REF14-040-1997: RNCC: 3 | RNVC: 2
BL43950: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-291-1102
Socket Wrench Socket

142911102
R4-5L: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-546-1993
Face Spanner Wrench Socket

145461993
480080S110-01A: RNCC: 3 | RNVC: 2

15 Jun 2005

5120-14-304-3133
Cone Mise En Forme

143043133
S16-0605-0602: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-229-8606
Open End Wrench

142298606
E74302C16-19WWK: RNCC: 2 | RNVC: 1
15-16X19: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-300-5179
Outil Armt Minuteri

143005179
363A33-100000-0000: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-276-3232
Tap And Reamer Wrench

142763232
NO PRIMARY REF14-276-3232: RNCC: 3 | RNVC: 2
C0PW3560: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-404-8311
Electrical Contact Remover

144048311
SD-0060000006: RNCC: 3 | RNVC: 2
SDEM6-0060: RNCC: 5 | RNVC: 2

20 Nov 1985

5120-14-428-8836
Spanner Wrench

144288836
350A93-3210-01: RNCC: 3 | RNVC: 2

22 Dec 1988

5120-14-358-4686
Screwdriver Bit

143584686
NO PRIMARY REF14-358-4686: RNCC: 3 | RNVC: 2
0024611: RNCC: 5 | RNVC: 2
ES.134: RNCC: 5 | RNVC: 2
ES134: RNCC: 5 | RNVC: 2
ES4: RNCC: 5 | RNVC: 2
0237121B00: RNCC: 5 | RNVC: 2

13 Aug 1979

5120-14-219-3646

5120-14-268-1401
Broche Dequilibrage

142681401
PR46710: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-430-3440
Doseur Extracteur

144303440
RT17031: RNCC: 3 | RNVC: 2

15 Mar 1989