What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.

A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Blacksmith's Punch?

A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Mechanical Finger?

A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.

A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Screwdriver And Wrench Assembly?

A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Stakeholder Bench Plate?

A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.

What is a Drill Drift?

A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.

A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Digging Bar?

A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

What is a Valve Spring Lifter?

A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.

What is a Fuse Puller?

A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.

Hand Tools, Nonedged, Nonpowered - France (FR)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by France (FR) - NCB is 14

Page 6 of 110

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by France

51	20	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - France (FR)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 16 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Pipe Vise? 19 Items: A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.
What is a Hand Vise? 25 Items: A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.
What is a Hand Hydraulic Jack? 133 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 153 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 903 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 17 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
Swage,Bottom,Blacksmith's 10 Items
What is a Hand Tube Flaring Tool? 23 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Blacksmith's Punch? 12 Items: A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.
What is a Drain Plug Wrench? 45 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 57 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 16 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 3829 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
Flatter,Blacksmith's 18 Items
Swage,Top,Blacksmith's 12 Items
What is a Pipe Wrench? 110 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 149 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 53 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
Screwdriver,Offset 54 Items
What is a Screwdriver Bit? 707 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Mechanical Finger? 25 Items: A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.
What is a Socket Wrench Socket? 1803 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 1412 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 1641 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 52 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 565 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
Jack,Push-Pull,Screw 30 Items
What is a Hand Tube Bender? 54 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 1106 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 55 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pinch Bar? 19 Items: A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.
What is a Pry Bar? 17 Items: A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.
What is a Wrecking Bar? 15 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 273 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 413 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 32 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 295 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
Face,Hammer,Inserted 25 Items
What is a Hole Sheet Metal Holder? 37 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Screwdriver And Wrench Assembly? 11 Items: A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.
What is a Hand Rivet Set? 121 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Stakeholder Bench Plate? 22 Items: A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.
What is a Drill Drift? 32 Items: A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.
What is a Tack Claw? 15 Items: A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.
Mattock 28 Items
What is a Socket Wrench Handle Bar? 108 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Stake,Sheet Metalworking 50 Items
Riveter,Blind,Hand 76 Items
What is a Hand Shovel? 43 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 98 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 30 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
What is a Digging Bar? 20 Items: A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.
Block,Dolly,Sheet Metalworking 56 Items
What is a Piston Ring Compressor? 34 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Valve Spring Lifter? 29 Items: A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.
What is a Fuse Puller? 20 Items: A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.
What is a Hand Lead Seal Press? 18 Items: A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.
What is a Hand Beading Tool? 91 Items: A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.
What is a Hand Hammer? 502 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
Head,Hand Hammer 81 Items
What is a Lamp Extractor? 76 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Tube Packing Ring Installing Tool? 29 Items: A Tube Packing Ring Installing Tool (INSTALLING TOOL,TUBE PACKING RING) is an item designed to insert packing rings on tubes within tube sheets on condensers and similar heat exchangers. In operation, the packing rings are assembled on the loading pin mandrel and are then transferred from the mandrel on to the tube by means of a tubular sleeve which slides on the mandrel.
What is a Carpenters' Pincers? 18 Items: A Carpenters' Pincers (PINCERS,CARPENTERS') is a plierlike hand tool having two opposing jaws which may have hammerlike backs. One handle has a nail or tack pulling claw, the other is shaped to form a screwdriver. The tool may contain a wire cutter. See also NIPPERS, END CUTTING and PINCERS, FARRIERS'.
What is a Trowel? 33 Items: A Trowel is a tool used for bricklaying, concrete work, plastering, linoleum laying, and masonry work. Excludes CORNER TOOL, CONCRETE.
What is a Hand Abrasive Wheel Dresser? 12 Items: A Hand Abrasive Wheel Dresser (DRESSER,ABRASIVE WHEEL,HAND) is a tool designed to remove glaze from, dress, shape, sharpen, and true solid abrasive wheels. Excludes NIB, DIAMOND, WHEEL DRESSING.
What is a Lamp Cap Extractor? 32 Items: A Lamp Cap Extractor (EXTRACTOR,LAMP CAP) is a tool specifically designed to facilitate the removal of lamp caps from switchboards, panels or indicator lamps.
What is a Rivet Bucking Bar? 51 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 86 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 277 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Woven Cable Grip? 23 Items: A Woven Cable Grip (GRIP,CABLE,WOVEN) is a braided wire device designed to clutch a bare or insulated conductor, cable or wire rope, for holding taut or drawing through conduit.
What is a Screw Thread Insert Extractor? 19 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is an Electron Tube Extractor? 18 Items: An Electron Tube Extractor (EXTRACTOR,ELECTRON TUBE) is a hand tool designed to facilitate the removal of electron tubes from electronic equipment and to avoid burning the fingers. It may be used for installing tubes.
What is a Cross Tip Screwdriver? 362 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 21 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 11 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 37 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Tool Handle Wedge? 10 Items: A Tool Handle Wedge (WEDGE,TOOL HANDLE) is excludes WEDGE, WOOD.
What is a Marlinespike? 16 Items: A Marlinespike is a metal hand tool made in the shape of a tapered pin. One end is pointed and the opposite end may be headed. The body may contain an eye for a lanyard sling, or be grooved lengthwise. Excludes CABLE PICK and FID.
What is an Aligning Punch? 272 Items: An Aligning Punch (PUNCH,ALIGNING) is a round, square, hexagonal or octagonal bodied hand tool, having a round tapered section 6-1/2 inches (165.1 mm) or more in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, DRIFT and DRIFTPIN.
What is a Drift Punch? 25 Items: A Drift Punch (PUNCH,DRIFT) is a round, square, hexagonal, or octagonal bodied hand tool, having a round tapered section 4 to 6 inches (101.6 mm to 152.4 mm) inclusive in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, ALIGNING; and DRIFTPIN.
What is a Putty Knife? 36 Items: A Putty Knife (KNIFE,PUTTY) is a hand tool with a nonedged blade fixed to a handle for laying on and smoothing putty and the like.
What is a Socket Wrench Adapter-Extension? 40 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 30 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 184 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Socket Wrench Ratchet Attachment? 47 Items: A Socket Wrench Ratchet Attachment (RATCHET ATTACHMENT,SOCKET WRENCH) is a connection for socket wrenches and handles. Consists of a ratcheting mechanism with an internal drive on one end and an external drive on the opposite end of the same size. The item is designed to permit continuous rotation of the socket in one direction without removing the socket or handle and without a complete rotation of the handle.
What is a Wrench Extension Handle? 81 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Socket Wrench Crowfoot Attachment? 155 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 33 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 43 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 48 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 2394 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 372 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 300 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 661 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 32 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand-Operated Grommet And Eyelet Press? 12 Items: A Hand-Operated Grommet And Eyelet Press (PRESS,GROMMET AND EYELET,HAND-OPERATED) is a device which punches or pierces holes and in addition fastens or sets eyelets and grommets in cloth, paper and similar material. May be used for fastening or setting rivets, lacing hooks and snaps in cloth, paper and similar material. It is hand operated by lever or screw action. See also PUNCH, EYELET, PLIER TYPE and PRESS, GROMMET AND EYELET, FOOT OPERATED.
What is a Claw Bar? 19 Items: A Claw Bar (BAR,CLAW) is before using, refer to Reference Drawing Group AG.
What is a Shock Type Wheel Stud Nut Wrench? 11 Items: A Shock Type Wheel Stud Nut Wrench (WRENCH,WHEEL STUD NUT,SHOCK TYPE) is a manually operated item designed to remove wheel stud nuts. In operation the inner nut is turned by a socket attached to a shaft on which is a loose swinging weighted handle. The weighted handle may be swung quickly to provide an impact force against the socket to loosen the seized or jammed nuts. The outer nut is held stationary by a separate hexagonal holding wrench.
What is a Drift Pin Set? 30 Items: A Drift Pin Set is a group of DRIFTPIN having different characteristics.
What is a Tire Iron? 25 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 115 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Blacksmith's Vise? 14 Items: A Blacksmith's Vise (VISE,BLACKSMITH'S) is a clamping device consisting of a mounting plate, one stationary and one manual screw actuated jaw and a supporting member extending downward from the stationary jaw to the floor. Designed to be mounted on a bench, table or the like. May include pipe holding jaws.
What is a Machinist's Vise? 64 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Clamp Base Bench Vise? 10 Items: A Clamp Base Bench Vise (VISE,BENCH,CLAMP BASE) is a clamping device consisting of a base, one stationary and one manual screw actuated jaw, and one or more guide bars or rods. Designed with an integral clamp for attaching to a bench, table, or the like. Does not include pipe holding jaws.
What is a Fixed Open End Wrench Set? 86 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Nail Set? 11 Items: A Nail Set is a round knurled, square, hexagonal or octagonal bodied hand tool having a round tapered section terminating in a cupped point. It is designed to set brad head nails below the surface by striking it a hammerlike blow. See also PUNCH, DRIVE PIN.
What is a Socket Wrench Set? 202 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is an Open End Box Wrench Set? 10 Items: An Open End Box Wrench Set (WRENCH SET,OPEN END BOX) is a group of WRENCH, OPEN END BOX having different characteristics.
What is a Combination Box And Open End Wrench Set? 72 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Box Wrench Set? 36 Items: A Box Wrench Set (WRENCH SET,BOX) is a group of box wrenches having different characteristics. It may include a HANDLE, EXTENSION WRENCH. See also WRENCH SET, COMBINATION, BOX AND OPEN END.
What is a Hot Line Stick? 26 Items: A Hot Line Stick is a hand tool consisting of a straight, round stick (pole) made of a suitable nonconductive material with a tool fixed to one end. The other end may be plain or have a butt mounting device fixed to it. Various types of attachments (hooks, rings, and bands) may be fixed to the body. It is designed for use in the repair and maintenance of live high voltage aerial lines. Excludes hot line sticks without heads.
Handle,Mattock-Pick 15 Items
What is a Wrench Kit? 73 Items: A Wrench Kit is an assortment of various types and sizes of wrenches such as SOCKET, SOCKET WRENCH; WRENCH, OPEN END, FIXED; WRENCH, BOX and the like. It may include adapter(s), ratchet(s) and the like. See also WRENCH SET (as modified.
What is a Brad Awl? 15 Items: A Brad Awl (AWL,BRAD) is a small, pointed tool used by shoemakers, saddlers, cabinetmakers, and the like for piercing small holes in wood, leather, and similar materials, and consists of a handle with a ferrule and a blade. The blade is round, terminating in a beveled, sharp straight edge and has a shank which passes through the center of the handle.
What is a Scratch Awl? 20 Items: A Scratch Awl (AWL,SCRATCH) is an item whose nominal length of blade is less than 4 inches (101.6 millimeters) and is provided with a nondetachable handle.
What is a Screw Extractor Set? 10 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 102 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
Jack,Scissors,Hand 26 Items
What is a Piston Ring Expander? 23 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
Mallet,Plastic 62 Items
Mallet,Rubber 10 Items
What is a Wood Mallet? 37 Items: A Wood Mallet (MALLET,WOOD) is excludes MALLET, CALKING; MALLET, HAWSING and MALLET, SERVING.
What is a Rack Bar Jack? 30 Items: A Rack Bar Jack (JACK,RACK BAR) is excludes JACK, BUMPER and JACK, REEL, HAND.
What is a Pneumatic Tire Valve Core Inserter And Remover? 14 Items: A Pneumatic Tire Valve Core Inserter And Remover (INSERTER AND REMOVER,PNEUMATIC TIRE VALVE CORE) is a bar of steel having a small cylindrical slotted end for removing or installing a valve core in a valve stem by a screwing motion. See also REPAIR TOOL, PNEUMATIC TIRE VALVE.
What is a Hand Tube Swaging Tool Kit? 20 Items: A Hand Tube Swaging Tool Kit (SWAGING TOOL KIT,TUBE,HAND) is a hand-operated noncutting tool consisting of one or more PUNCH, TUBE SWAGING, HAND and a tube flaring bar.
What is a Hand Tube Flaring Punch? 11 Items: A Hand Tube Flaring Punch (PUNCH,TUBE FLARING,HAND) is a noncutting tool having a shaped end or section designed to flare the ends of tubes. One type is designed to flare the ends of tubes against a tube sheet, and another to flare tube ends to mate with tube fittings. Includes punch components of FLARING TOOL, TUBE, HAND.
What is a Hose Strap Band Clamping Tool? 26 Items: A Hose Strap Band Clamping Tool (CLAMPING TOOL,STRAP BAND,HOSE) is an item designed to tension and lock metal straps around a rubber hose, and the like. It is also used to clamp and hold fittings therein.
What is a Mechanical Puller? 3073 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 470 Items
What is a Slip Joint Pliers? 84 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Brake Repair Pliers? 14 Items: A Brake Repair Pliers (PLIERS,BRAKE REPAIR) is a tool having jaws designed for use in brake repair operations, such as removing and replacing items such as keys, springs, and the like. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 226 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 12 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 81 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 56 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 15 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 11 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 29 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Cross Tip Screwdriver Set? 14 Items: A Cross Tip Screwdriver Set (SCREWDRIVER SET,CROSS TIP) is a group of SCREWDRIVER, CROSS TIP having different characteristics.
What is a Spanner Wrench Set? 18 Items: A Spanner Wrench Set (WRENCH SET,SPANNER) is a group of items under WRENCH, SPANNER having different characteristics.
What is a Drive Pin Punch Set? 31 Items: A Drive Pin Punch Set (PUNCH SET,DRIVE PIN) is a group of PUNCH, DRIVE PIN having different characteristics.
What is an Aligning Punch Set? 13 Items: An Aligning Punch Set (PUNCH SET,ALIGNING) is a group of PUNCH, ALIGNING having different characteristics. See also DRIFTPIN SET.
What is a Slugging Type Box Wrench Socket? 16 Items: A Slugging Type Box Wrench Socket (SOCKET,SLUGGING TYPE BOX WRENCH) is an item having a hexagonal external drive at one end, made to fit into the internal hexagonal or 12-point opening of a slugging type box wrench. The opposite end has a single-broached hexagonal opening of the same size as the external drive. The item is designed with extra thick walls to withstand the impact of sledge blows on the driving wrench.
What is a Mechanical Puller Step Plate? 44 Items: A Mechanical Puller Step Plate (STEP PLATE,MECHANICAL PULLER) is a circular disk, flanged to provide a shoulder, and designed to provide a base for the screw point of a PULLER, MECHANICAL when pulling externally mounted bearings, gears, and the like from hollow shafts or housings. It has a concentric, countersunk hole to accommodate the puller screw point.
What is a Solid Center Punch? 79 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Cable Type Ratchet Lever Puller? 20 Items: A Cable Type Ratchet Lever Puller (PULLER,RATCHET LEVER,CABLE TYPE) is an item consisting of a metal frame and ratchet lever reel to which is attached one end of a flexible cable (wire rope). The cable feeds through the fast eye in the metal frame, and may be reeved through a slip hook tackle hook. See also BINDER, LOAD; HOIST, WIRE ROPE and STRETCHER, WIRE.
What is an Electronic Equipment Tuning Wand? 18 Items: An Electronic Equipment Tuning Wand (TUNING WAND,ELECTRONIC EQUIPMENT) is a hand-held rod used in determining the adjustment of the windings of a radio frequency coil. It is made of insulating material with iron on one end and brass on the other end. By inserting the iron end in the coil, the inductance is increased and by inserting the brass end, the inductance is decreased.
What is a Combination Open End And Spanner Wrench? 14 Items: A Combination Open End And Spanner Wrench (WRENCH,OPEN END AND SPANNER,COMBINATION) is a tool having open end wrench characteristics at one end and spanner wrench features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s) at the other end.
What is a Detent Handling Tool? 187 Items: A Detent Handling Tool (HANDLING TOOL,DETENT) is a specially designed handling tool consisting of a rigid bar with a T-handle on one end. The other end is equipped with threads designed to mate the threads of a detent to facilitate inserting or extracting.
What is a Hand Material Handling Hook? 23 Items: A Hand Material Handling Hook (HOOK,MATERIAL HANDLING,HAND) is a hook whose curved end conforms to Style AP1, AP2, AP3 or AP4 of Reference Drawing Group AP. Excludes HOOK, MANHOLE COVER, HAND; HOOK, WIRE BREAKING, HAND; HOOK, ROCK CRUSHER FEEDING, HAND; HOOK, STRAINER REMOVING, HAND and HOOKS, BAG HANDLING, HAND.
What is a Magnetic Retrieving Tool? 11 Items: A Magnetic Retrieving Tool (RETRIEVING TOOL,MAGNETIC) is a hand-operated magnetic device used to locate and pick up metallic articles, such as bolts, nuts, pins, washers, and the like, in confined spaces. It may be rigid, flexible or adjustable. Excludes FINGER, MECHANICAL.
What is a Mechanical Puller Adapter? 78 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Combination Box And Open End Box Wrench? 13 Items: A Combination Box And Open End Box Wrench (WRENCH,BOX AND OPEN END BOX,COMBINATION) is a double end wrench, box and open end box, primarily designed for removing or replacing tube fittings. The opening in the open end box may be machined at an angle from the longitudinal center line of the wrench.
What is a Screw Thread Insert Inserter? 136 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Flat Tip Screwdriver Set? 48 Items: A Flat Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP) is a group of SCREWDRIVER, FLAT TIP having different characteristics.
What is a Terminal Crimping Tool Contact Positioner? 89 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 16 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is an Adjustable Wrench? 138 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 239 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 75 Items
Handle,Shovel 10 Items
What is a Socket Wrench Spanner Attachment? 88 Items: A Socket Wrench Spanner Attachment (SPANNER ATTACHMENT,SOCKET WRENCH) is an item having an adjustable or fixed span with pin, hook, or key type end that is used to fit and turn various size retaining rings, cover plates, plugs, couplings, and like parts. Usually designed to be driven by a male driver.
What is a Retaining Ring Installation Tool? 44 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Tacker? 16 Items: A Tacker is a hand-operated, hammerlike or gunlike item without a clincher, used to drive preformed connecting elements like pins, nails or staples through one object or piece of material into another. Excludes STAPLER (as modified).
What is a Bearing And Bushing Inserter? 290 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 207 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 939 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 14 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 93 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 161 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 94 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 141 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 53 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Six Point Tip Screwdriver? 155 Items: A Six Point Tip Screwdriver (SCREWDRIVER,SIX POINT TIP) is a manual screwdriver having a single nonremoveable blade having a tip with six rounded points.
What is a Seal Inserter And Remover? 147 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 478 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is a Preformed Packing Inserter And Remover? 34 Items: A Preformed Packing Inserter And Remover (INSERTER AND REMOVER,PREFORMED PACKING) is a hand tool designed to install and remove a PACKING, PREFORMED.
What is a Pin Remover? 34 Items: A Pin Remover (REMOVER,PIN) is a hand tool designed to facilitate the removal of a pin from a hole.
What is a Pin Inserter And Remover? 13 Items: A Pin Inserter And Remover (INSERTER AND REMOVER,PIN) is a rodlike tool designed to facilitate the insertion and removal of a pin from a hole.
What is an Electrical Contact Inserter And Remover? 37 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Piston Inserter? 40 Items: A Piston Inserter (INSERTER,PISTON) is a tool designed to permit installation of a piston or piston assembly without damaging the packings or piston.
What is a Spring Inserter And Remover? 85 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 13 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Stud Inserter? 22 Items: A Stud Inserter (INSERTER,STUD) is a device designed to drive in studs. It does not have any facilities for removing or extracting studs. See also INSERTER AND REMOVER, STUD.
What is a Stud Inserter And Remover? 17 Items: A Stud Inserter And Remover (INSERTER AND REMOVER,STUD) is a group of items designed to extract and to drive studs. It may include collets, guides, housings, holders and the like. See also REMOVER SET, STUD and INSERTER, STUD.
What is a Gear Inserter? 54 Items: A Gear Inserter (INSERTER,GEAR) is a hand tool designed to install various gears onto a gearshaft. It may be operated by a pushing or a striking force.
What is a Crimping Tool Die? 73 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is an Electrical Connector Inserter? 45 Items: An Electrical Connector Inserter (INSERTER,ELECTRICAL CONNECTOR) is a hand tool designed to hold an electrical connector, and to assist in the positioning and installation of the connector on a cover, panel or the like.
What is a Float? 12 Items: A Float is a tool used for concrete, plastering and grouting work.
What is a Mechanical Puller Set? 19 Items: A Mechanical Puller Set (PULLER SET,MECHANICAL) is two or more separate PULLER, MECHANICAL of different fixed sizes.
What is a Lifting Pneumatic Bag? 11 Items: A Lifting Pneumatic Bag (PNEUMATIC BAG,LIFTING) is a device made of flexible material designed to lift another item by being placed under the item and being inflated with air or some other gas. It will have a means of being connected to an air or gas source and may include a connector hose, a control valve and/or a pressure regulator.
What is a Cable Tie Installation Tool? 22 Items: A Cable Tie Installation Tool (INSTALLATION TOOL,CABLE TIE) is a lightweight, hand-held, hand-operated tool designed to fasten cable ties, straps and the like. Cable tie is inserted into the nose of the tool flush to the cable tie head. Trigger handle tightens cable tie and cuts off any excess. These installation tools are available in a variety of sizes depending on their intended use with miniature, intermediate, standard, heavy or extra heavy cross section ties.
What is a Bearing Staking Installation Tool? 159 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
Wrench Set,Ratchet 15 Items
What is a Sealant Dispenser? 26 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Retaining Ring Pliers Set? 10 Items: A Retaining Ring Pliers Set (PLIERS SET,RETAINING RING) is a group of PLIERS, RETAINING RING having different characteristics.
What is a Hand Armament Subsystem Carrier? 52 Items: A Hand Armament Subsystem Carrier (CARRIER,ARMAMENT SUBSYSTEM,HAND) is a metallic item with a clamp device and/or space for depositing articles. It is used for transporting weapon parts during maintanence and/or repair work, such as gun barrel, automatic loader, breechblock and the like.
What is a Ring Retaining Pliers Tip Set? 13 Items: A Ring Retaining Pliers Tip Set (TIP SET,PLIERS,RING RETAINING) is a collection of removable metallic tips in matched pairs used to provide various size capablities to PLIERS, RING RETAINING which permits the removal and installation of internal and external retaining rings.
What is a Plug Electrical Connector Extractor? 45 Items: A Plug Electrical Connector Extractor (EXTRACTOR,ELECTRICAL CONNECTOR,PLUG) is a hand tool designed to disassemble CONNECTOR, PLUG, ELECTRICAL from a CONNECTOR, RECEPTACLE, ELECTRICAL.
What is a Torque Wrench Adapter Set? 10 Items: A Torque Wrench Adapter Set (ADAPTER SET,TORQUE WRENCH) is tWO or more ADAPTER, TORQUE WRENCH of different sizes.
What is an Electronic Component Inserter And Remover? 79 Items: An Electronic Component Inserter And Remover (INSERTER AND REMOVER,ELECTRONIC COMPONENT) is an item which can insert or remove an electronic component package such as MICROCIRCUIT; RESISTOR, NETWORK (as modified); and the like from its mounting position or socket. Excludes INSERTER AND REMOVER, ELECTRICAL CONTACT; REMOVER, ELECTRICAL CONTACT; EXTRACTOR, ELECTRICAL CARD; EXTRACTOR, ELECTRONIC CRYSTAL UNIT; EXTRACTOR, ELECTRON TUBE.
What is an Impact Type Bit Set And Handle Screwdriver? 14 Items: An Impact Type Bit Set And Handle Screwdriver (SCREWDRIVER,BIT SET AND HANDLE,IMPACT TYPE) is an item consisting of a set of screwdriver bits and a impact driver to accommodate the bits of various types and characteristics. It is designed to transmit a strong rotating movement by the impact of a hammer blowed on the impact driver. It is used to loosen rusted or seized screws. Excludes SCREWDRIVER, BIT SET AND HANDLE.
What is a Hand Vise Jaw? 19 Items: A Hand Vise Jaw (JAW,VISE,HAND) is an item consisting of two opposing parts of a VISE, HAND. The item is moveable and able to open and close. It can hold, grasp or clamp work.
What is a Screwdriver Handle? 28 Items: A Screwdriver Handle (HANDLE,SCREWDRIVER) is an item used to accommodate various types of BIT, SCREWDRIVER. It is designed to rotate a bit that is used for installing or removing screws.
What is a Wire Twister Pliers? 25 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 284 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is a Mechanical Puller Body? 45 Items: A Mechanical Puller Body (BODY,PULLER,MECHANICAL) is an item designed to support and enclose the internal parts of a PULLER,MECHANICAL.
What is a Flat Tip And Cross Tip Screwdriver Set? 39 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is a Socket Wrench Screwdriver Attachment Set? 22 Items: A Socket Wrench Screwdriver Attachment Set (SCREWDRIVER ATTACHMENT SET,SOCKET WRENCH) is a set of screwdriver attachment, socket wrench of different sizes. Items consist of a female square drive on one end to attach to a handle, socket wrench and various screwdriver tip configurations on the opposite end. Excludes SCREWDRIVER ATTACHMENT,SOCKET WRENCH
What is an Oil Filter Wrench? 44 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 430 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Communications Equipment Spring Adjuster? 13 Items: A Communications Equipment Spring Adjuster (ADJUSTER,SPRING,COMMUNICATIONS EQUIPMENT) is a single or double end tool, equipped with slot(s) of various dimensions or with cylindrical rod(s), used for adjusting the springs or spring tensioned parts of electronic equipment.
What is a Rotating Members Aligning Tool? 32 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
What is a Final Drive Assembly Alignment Pin? 41 Items: A Final Drive Assembly Alignment Pin (ALIGNMENT PIN,FINAL DRIVE ASSEMBLY) is a special designed pin used in the assembling of the final drive.
Arm,Handling Tool 77 Items
What is a Splicing Sleeve Compressing Tool? 23 Items: A Splicing Sleeve Compressing Tool (COMPRESSING TOOL,SPLICING SLEEVE) is a hand tool having hinged leverage handles similar to a CUTTER, BOLT or pliers, designed to compress a splicing sleeve when joining the ends of two conductors, or when forming an eye splice in the end of a wire rope. Excludes CRIMPING TOOL, TERMINAL, HAND.
What is a Hand Screw Jack Extension? 14 Items: A Hand Screw Jack Extension (EXTENSION,HAND SCREW JACK) is a length of externally threaded rigid shafting which is the adjustable section of a JACK, SCREW, HAND.
What is a Mechanical Puller Gear Adapter? 21 Items: A Mechanical Puller Gear Adapter (GEAR ADAPTER,PULLER,MECHANICAL) is an adapter that adapts a PULLER,MECHANICAL, to pull a certain gear.
Handle,Hydraulic Jack 18 Items
What is a Female Electrical Contact Resizing Tool? 11 Items: A Female Electrical Contact Resizing Tool (RESIZING TOOL,FEMALE ELECTRICAL CONTACT) is a tool designed to shape to a specific size, female contacts such as those used on electrical connectors, tube sockets, crystal sockets, and pin jacks.
What is a Screwdriver And Socket Wrench Combination? 13 Items: A Screwdriver And Socket Wrench Combination is a hand-tool formed into an integral unit with a socket wrench at one end and a screwdriver bit at the other end. See also SCREWDRIVER AND WRENCH ASSEMBLY.
What is a Hand Hose Fitting Swaging Tool Kit? 11 Items: A Hand Hose Fitting Swaging Tool Kit (SWAGING TOOL KIT,HOSE FITTING,HAND) is a device, hydraulically actuated by hand or power operated pump, consisting of face plate, adapter plate, finger cages, fingers, ram, bushing, and expanding mandrels combined on a single base in various functional arrangements. It is used for swaging the outside diameter of hose assembly fittings, expanding the inside diameter of hose assemblies, and securing the fabrication of hose assemblies. Included are a hand or power operated pump, lubricant, cases, and trays.
What is a Catch Lever Tool? 12 Items: A Catch Lever Tool (LEVER TOOL,CATCH) is a specially designed hand tool which engages the opening and closing lever of a CATCH (as modified) for ease of operation. It is constructed of thin rigid material, usually flat, and one end has an engaging tongue.
What is a Manual Impact Wrench? 11 Items: A Manual Impact Wrench (WRENCH,IMPACT,MANUAL) is a manually operated handheld tool consisting of spring-loaded handle and a power-impact head which delivers a torsional impact from either continuous movement of the handle in one direction, or by a reciprocating action. It is used in tightening and loosening fasteners, such as bolts, nuts, and the like. The item may include sockets, extensions and offset fittings, nut runners, and the like.
What is a Drift? 63 Items: A Drift is an item consisting of a tubular body fitted with replaceable tips. It is designed to insert or remove mechanical components where space is restricted.
What is a Nutdriver? 46 Items: A Nutdriver is a non-powered hand tool with a screwdriver style handle, shaft and formed female hex or square socket at driving end.
What is a Locking Device Removal Tool? 12 Items: A Locking Device Removal Tool (REMOVAL TOOL,LOCKING DEVICE) is a hand tool designed to facilitate the removal of a WASHER, KEY and a LOCKING PLATE, NUT AND BOLT.
What is a Hydraulic Fitting Crimping Tool Head? 26 Items: A Hydraulic Fitting Crimping Tool Head (HEAD,CRIMPING TOOL,HYDRAULIC FITTING) is a component of a crimping tool used to compress fittings on fluid tubes. It consists of a U-shape item, in which, are mounted different sizes of DIE, CRIMPING TOOL for tubes of various diameters.
What is a Torque Screwdriver? 11 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.
What is a Special Purpose Combination Wrench? 13 Items: A Special Purpose Combination Wrench (WRENCH,COMBINATION,SPECIAL PURPOSE) is a tool having a combination of ends and facets. The ends may have open end, box or spanner characteristics. The sides may have features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s). Designed to fit specific items, not sized as standard or metric.
What is a Screwdriver Bit Holder? 56 Items: A Screwdriver Bit Holder (HOLDER,SCREWDRIVER BIT) is an attachment with a socket end for accepting male hexagon shank insert bits and a drive end for adapting to a portable power or hand tool.
What is a Telescoping Pole? 16 Items: A Telescoping Pole (POLE,TELESCOPING) is an item which is designed to be extended or compressed by the sliding of overlapping sections. This item may or may not be able to accommodate an extension.

Stock Items From Supply Class 5120 Page 6 of 110

5120-14-415-5975
Torque Wrench

144155975
A153-3-103602: RNCC: 3 | RNVC: 2
0203157M00: RNCC: 5 | RNVC: 2

18 May 1987

5120-14-457-9023
Torque Wrench

144579023
R.303U: RNCC: 3 | RNVC: 2
R303U: RNCC: 5 | RNVC: 2
3148515123092: RNCC: 5 | RNVC: 2
0512309: RNCC: 5 | RNVC: 9

29 Sep 1992

5120-14-509-9214
Torque Wrench

145099214
NO PRIMARY REF14-509-9214: RNCC: 3 | RNVC: 2
74-6: RNCC: 5 | RNVC: 9
5120AA1106621: RNCC: 6 | RNVC: 9

4 Nov 1998

5120-14-522-6697
Torque Wrench

145226697
1056348F00: RNCC: 3 | RNVC: 2

15 Nov 2000

5120-14-235-3908
Torque Wrench

142353908
5-50: RNCC: 3 | RNVC: 2
V2-95-019: RNCC: 5 | RNVC: 2
3272670284388: RNCC: 5 | RNVC: 2
5-50D: RNCC: 5 | RNVC: 9
5-50DC2-1-2DC2-3-4: RNCC: 5 | RNVC: 9
DYNAST0P5-50: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-446-8334
Torque Wrench

144468334
NOPRIMARYREF144468334: RNCC: 3 | RNVC: 2
R342A: RNCC: 5 | RNVC: 2
91729311: RNCC: 5 | RNVC: 2
91729311: RNCC: 5 | RNVC: 2
R.342A: RNCC: 5 | RNVC: 2
0512340: RNCC: 5 | RNVC: 9
R.342: RNCC: 5 | RNVC: 9
R342: RNCC: 5 | RNVC: 9

17 Apr 1991

5120-14-506-6411
Torque Wrench

145066411
ESM196-0001-N3-20MDAN: RNCC: 2 | RNVC: 2
MAT196-0066F34-N3: RNCC: 3 | RNVC: 2
MAT196-1234F16-N3: RNCC: 3 | RNVC: 2

4 May 1998

5120-14-475-1615
Torque Wrench

144751615
SP5626: RNCC: 3 | RNVC: 2

22 Mar 1995

5120-14-519-5592
Machinist's Vise

145195592
921949: RNCC: 3 | RNVC: 9

22 Mar 2000

5120-14-404-1190
Mechanical Puller

144041190
09P638: RNCC: 3 | RNVC: 2

11 Sep 1985

5120-14-482-1375
Ratchet Wrench

144821375
S-159: RNCC: 3 | RNVC: 2
S159: RNCC: 3 | RNVC: 2
3272670215566: RNCC: 5 | RNVC: 2

20 Jun 1996

5120-14-554-3726
Socket Wrench

145543726
0038112: RNCC: 3 | RNVC: 2
1648: RNCC: 5 | RNVC: 2
IN1648: RNCC: 5 | RNVC: 2

26 Jun 2007

5120-14-337-5400
Socket Wrench

143375400
RP470181: RNCC: 3 | RNVC: 2

7 Oct 1976

5120-14-485-7326
Mechanical Puller

144857326
332A93-1181-00: RNCC: 3 | RNVC: 2

6 Feb 1997

5120-14-432-7219
Seal Inserter

144327219
OUT50159: RNCC: 3 | RNVC: 2
0UT50159: RNCC: 5 | RNVC: 2

21 Jun 1989

5120-14-346-8170
Box Wrench

143468170
105N18X20: RNCC: 3 | RNVC: 2

19 Jan 1978

5120-14-387-2637
Box Wrench

143872637
8813100000: RNCC: 3 | RNVC: 2

15 Sep 1983

5120-14-386-3923
Hand Hydraulic Jack

143863923
02640912300: RNCC: 3 | RNVC: 2
026409123: RNCC: 5 | RNVC: 2

24 Aug 1983

5120-14-373-6773
Box Wrench

143736773
225767: RNCC: 3 | RNVC: 2

13 Nov 1981

5120-14-399-4676
Mechanical Puller

143994676
20388134: RNCC: 3 | RNVC: 2

6 Mar 1985

5120-14-441-6120
Mechanical Puller

144416120
8815691000: RNCC: 3 | RNVC: 2

5 Sep 1990

5120-14-552-4787
Telescoping Pole

145524787
SOLO 108: RNCC: 3 | RNVC: 2

8 Jan 2007

5120-14-393-8797
Seal Inserter

143938797
OU136757: RNCC: 3 | RNVC: 2
OU136757: RNCC: 5 | RNVC: 2
0U136757: RNCC: 5 | RNVC: 9
OU136757: RNCC: 5 | RNVC: 9

23 Jun 1984

5120-14-434-3172
Aligning Punch

144343172
OUT10779: RNCC: 3 | RNVC: 2
0UT10779: RNCC: 5 | RNVC: 2

20 Sep 1989

5120-14-536-1202
Hand Hydraulic Jack

145361202
587313: RNCC: 3 | RNVC: 2

9 Jul 2003

5120-14-316-1618
Mechanical Puller

143161618
A128117: RNCC: 3 | RNVC: 2
100226: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-500-6494
Ratchet Wrench

145006494
10373160: RNCC: 3 | RNVC: 2
F300 0T 024 6680: RNCC: 6 | RNVC: 9

29 Oct 1997

5120-14-409-5112
Piston Inserter

144095112
8814085000: RNCC: 3 | RNVC: 2

28 May 1986

5120-14-250-7853
Hot Line Stick

142507853
540P: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-212-8310
Socket Wrench

142128310
H16: RNCC: 3 | RNVC: 2

1 Jan 1964

5120-14-274-8043
Hammer Handle

142748043
B54522-33U450: RNCC: 2 | RNVC: 2
1-16: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-361-7548
Mechanical Puller

143617548
MAS4743: RNCC: 3 | RNVC: 2
004743: RNCC: 5 | RNVC: 2
4743: RNCC: 5 | RNVC: 2

20 Feb 1980

5120-14-466-3770
Aligning Punch

144663770
Q46748: RNCC: 3 | RNVC: 2

3 Nov 1993

5120-14-281-7625
Mechanical Puller

142817625
A124188: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-351-6709
Socket Wrench

143516709
NG408-03-2REP30-40-2: RNCC: 3 | RNVC: 2

12 Sep 1978

5120-14-537-1900
Mechanical Puller

145371900
47136790: RNCC: 3 | RNVC: 2

13 Oct 2003

5120-14-344-8724
Jaw Cable Grip

143448724
SBDS16-20-14SILIC0NE: RNCC: 3 | RNVC: 2
EC66E18-15: RNCC: 3 | RNVC: 9

9 Sep 1977

5120-14-468-9820
Mechanical Puller

144689820
40N108127: RNCC: 3 | RNVC: 2

30 Mar 1994

5120-14-545-9204
Mechanical Puller

145459204
S47015: RNCC: 3 | RNVC: 2

27 May 2005

5120-14-474-8750
Seal Inserter

144748750
M423300A1406A01: RNCC: 3 | RNVC: 2

8 Mar 1995

5120-14-548-6394
Piston Inserter

145486394
Q47791: RNCC: 3 | RNVC: 2
Q47791: RNCC: 5 | RNVC: 2

27 Jan 2006

5120-14-378-3161
Box Wrench

143783161
50-57: RNCC: 3 | RNVC: 2

20 Jul 1982

5120-14-552-0454
Socket Wrench

145520454
99C.10: RNCC: 3 | RNVC: 2
00.39.87.10: RNCC: 5 | RNVC: 2

22 Nov 2006

5120-14-377-0868
Mechanical Puller

143770868
D99: RNCC: 3 | RNVC: 2
D.99: RNCC: 3 | RNVC: 2
91711988: RNCC: 5 | RNVC: 2
0019707: RNCC: 5 | RNVC: 2
3148510197074: RNCC: 5 | RNVC: 2

28 Apr 1982

5120-14-287-8415
Open End Box Wrench

142878415
31808: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-375-1784
Mechanical Puller

143751784
16380348: RNCC: 3 | RNVC: 2
16380348: RNCC: 5 | RNVC: 9

26 Feb 1982

5120-14-469-9070
Socket Wrench

144699070
72.21VSE: RNCC: 3 | RNVC: 2
3148511167892: RNCC: 5 | RNVC: 2
0116910: RNCC: 5 | RNVC: 9

18 May 1994

5120-14-505-7540
Jaw Cable Grip

145057540
16392696: RNCC: 3 | RNVC: 9
16392696: RNCC: 5 | RNVC: 2

26 Mar 1998

5120-14-201-5123
Nail Set

142015123
1754-2: RNCC: 3 | RNVC: 2
CC2: RNCC: 3 | RNVC: 2
374-2: RNCC: 5 | RNVC: 9

1 Jan 1962

5120-14-548-9308
Drain Plug Wrench

145489308
45733972: RNCC: 3 | RNVC: 2

23 Feb 2006

5120-14-505-9234
Socket Wrench

145059234
T20UT0007000: RNCC: 3 | RNVC: 2

30 Mar 1998

5120-14-518-2842
Hand Hammer

145182842
0004450301: RNCC: 3 | RNVC: 2

2 Feb 2000

5120-14-427-8298
Box Wrench

144278298
98 104 999 27X29: RNCC: 3 | RNVC: 9

16 Nov 1988

5120-14-531-8875
Mechanical Puller

145318875
T651G3002101: RNCC: 3 | RNVC: 2

25 Sep 2002

5120-14-530-2990
Hand Hammer

145302990
205.F50: RNCC: 3 | RNVC: 2
3148511471333: RNCC: 5 | RNVC: 2

29 May 2002

5120-14-280-3885
Socket Wrench

142803885
F117082: RNCC: 3 | RNVC: 2
1052330T00: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-542-0796
Aligning Punch

145420796
U21890100: RNCC: 3 | RNVC: 2

2 Jul 2004

5120-14-489-3060
Mechanical Puller

144893060
10312147: RNCC: 3 | RNVC: 2

9 Jul 1997

5120-14-305-1962
Hand Tube Bender

143051962
2511116: RNCC: 3 | RNVC: 2
G100-2511-14X16: RNCC: 5 | RNVC: 2

1 Jan 1974

5120-14-432-3851
Mechanical Puller

144323851
541646: RNCC: 3 | RNVC: 2
00541646: RNCC: 5 | RNVC: 2

7 Jun 1989

5120-14-391-8673
Mechanical Puller

143918673
46AM057: RNCC: 3 | RNVC: 2

21 Mar 1984

5120-14-524-2671
Pipe Wrench

145242671
800387: RNCC: 3 | RNVC: 2

7 Mar 2001

5120-14-379-4886
Driftpin

143794886
7M141Q4: RNCC: 3 | RNVC: 2

1 Oct 1982

5120-14-521-7640
Ratchet Wrench

145217640
ISO5OUTA01: RNCC: 3 | RNVC: 2

13 Sep 2000

5120-14-366-3772
Socket Wrench

143663772
16595078: RNCC: 3 | RNVC: 2
16595078: RNCC: 5 | RNVC: 9

20 Nov 1980

5120-14-449-8533
Hand Rivet Set

144498533
389517N: RNCC: 3 | RNVC: 2

11 Sep 1991

5120-14-520-7064
Hand Rivet Set

145207064
AT110CA: RNCC: 3 | RNVC: 2

5 Jun 2000

5120-14-483-8638
Seal Inserter

144838638
0-702406-4-1: RNCC: 3 | RNVC: 2

5 Oct 1996

5120-14-515-6862
Socket Wrench

145156862
14858: RNCC: 3 | RNVC: 2

23 Jul 1999

5120-14-368-9290
Socket Wrench

143689290
MUP5347: RNCC: 3 | RNVC: 2

10 Mar 1981

5120-14-544-9536
Box Wrench Set

145449536
55A.JD8: RNCC: 3 | RNVC: 2

8 Mar 2005

5120-14-459-0020
Hand Screw Jack

144590020
5000791121: RNCC: 3 | RNVC: 2
5000791121: RNCC: 5 | RNVC: 2

11 Nov 1992

5120-14-506-7552
Hand Roller

145067552
10412: RNCC: 3 | RNVC: 2

13 May 1998

5120-14-200-4402
Socket Wrench

142004402
41CLE1702: RNCC: 3 | RNVC: 2

1 Jan 1962

5120-14-544-1200
Gear Inserter

145441200
30691-51900: RNCC: 3 | RNVC: 2

4 Jan 2005

5120-14-514-0953
Drain Plug Wrench

145140953
PL1GV5020C100027: RNCC: 3 | RNVC: 2

22 Apr 1999

5120-14-371-9737
Mechanical Puller

143719737
8813245000: RNCC: 3 | RNVC: 2

5 Aug 1981

5120-14-479-4465
Box Wrench

144794465
OM404: RNCC: 3 | RNVC: 2

10 Jan 1996

5120-14-291-8015
Socket Wrench

142918015
02640046300: RNCC: 3 | RNVC: 2
026400463: RNCC: 5 | RNVC: 2
204798: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-397-8219
Socket Wrench

143978219
M4Z6021902001: RNCC: 3 | RNVC: 2

31 Jan 1985

5120-14-542-9430
Seal Inserter

145429430
8460008: RNCC: 3 | RNVC: 2
8460008: RNCC: 5 | RNVC: 2

14 Aug 2004

5120-14-522-3797
Socket Wrench

145223797
TC3053G001: RNCC: 3 | RNVC: 2

25 Oct 2000

5120-14-396-1691
Mechanical Puller

143961691
M10210: RNCC: 3 | RNVC: 2

27 Nov 1984

5120-14-546-0306
Socket Wrench

145460306
T322G30T0004: RNCC: 1 | RNVC: 2
A97047: RNCC: 3 | RNVC: 2

7 Jun 2005

5120-14-488-3553
Box Wrench

144883553
P45720: RNCC: 3 | RNVC: 2

30 Apr 1997

5120-14-274-8038
Hammer Handle

142748038
E71011B38A320: RNCC: 2 | RNVC: 2

1 Jan 1971

5120-14-469-2269
Mechanical Puller

144692269
40N108376-2: RNCC: 3 | RNVC: 2

13 Apr 1994

5120-14-266-3403
Tire Iron

142663403
858: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-312-9569
Hand Screw Jack

143129569
RJZ: RNCC: 3 | RNVC: 2
209: RNCC: 3 | RNVC: 2
ZINRJZ: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-448-5545
Mechanical Puller

144485545
Z202550: RNCC: 3 | RNVC: 2

1 Jul 1991

5120-14-520-1226
Aligning Punch Set

145201226
6501JBR: RNCC: 3 | RNVC: 2

12 May 2000

5120-14-552-6850
Drive Pin Punch Set

145526850
8426 SP CVN: RNCC: 3 | RNVC: 2
00.07.99.23: RNCC: 5 | RNVC: 2

24 Jan 2007

5120-14-534-7555
Seal Inserter

145347555
132298: RNCC: 3 | RNVC: 2

2 Apr 2003

5120-14-282-4897
Inspection Mirror

142824897
S1109: RNCC: 3 | RNVC: 2
S1109: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-535-2367
Mechanical Puller

145352367
6532POC: RNCC: 3 | RNVC: 2

14 May 2003

5120-14-338-9002
Mechanical Puller

143389002
8811590000: RNCC: 3 | RNVC: 2

17 Dec 1976

5120-14-463-1682
Mechanical Puller

144631682
16380233: RNCC: 3 | RNVC: 2
16380233: RNCC: 5 | RNVC: 9

26 May 1993

5120-14-446-6983
Drill Guide

144466983
548016: RNCC: 3 | RNVC: 2

9 Apr 1991

5120-14-512-2843
Torque Wrench

145122843
J446-50: RNCC: 3 | RNVC: 2

10 Feb 1999

5120-14-457-5609
Torque Wrench

144575609
253816: RNCC: 3 | RNVC: 2
253816: RNCC: 5 | RNVC: 9

10 Sep 1992

5120-14-444-8997
Torque Wrench

144448997
0882652K00: RNCC: 3 | RNVC: 2

28 Jan 1991

5120-14-358-5307
Torque Wrench

143585307
S303DA: RNCC: 3 | RNVC: 2

7 Sep 1979

5120-14-209-5405
Torque Wrench

142095405
C108-40: RNCC: 3 | RNVC: 2
9970-111-039-90: RNCC: 5 | RNVC: 2
9970-111-039: RNCC: 5 | RNVC: 2

1 Jan 1964

5120-14-420-8804
Torque Wrench

144208804
96104078: RNCC: 3 | RNVC: 2
96104078: RNCC: 5 | RNVC: 9

22 Dec 1987

5120-14-417-1036
Pin Remover

144171036
540192: RNCC: 3 | RNVC: 2

1 Jul 1987

5120-14-514-2607
Torque Wrench

145142607
S.322A: RNCC: 3 | RNVC: 2
S322A: RNCC: 3 | RNVC: 2
3148510588315: RNCC: 5 | RNVC: 2

5 May 1999

5120-14-477-5561
Torque Wrench

144775561
0514715: RNCC: 3 | RNVC: 2
S.203DA: RNCC: 3 | RNVC: 2
Y00005385: RNCC: 5 | RNVC: 2
91629363: RNCC: 5 | RNVC: 2
101577: RNCC: 5 | RNVC: 2
3148515147159: RNCC: 5 | RNVC: 2
91629363: RNCC: 5 | RNVC: 2
1111806C00: RNCC: 5 | RNVC: 2
Y00005385: RNCC: 5 | RNVC: 9

11 Sep 1995

5120-14-530-8701
Torque Wrench

145308701
A.300MT: RNCC: 3 | RNVC: 2

9 Jul 2002

5120-14-425-9540
Aligning Punch

144259540
500441MTH20R2: RNCC: 3 | RNVC: 2

28 Jul 1988

5120-14-529-0554
Mechanical Puller

145290554
8819620000: RNCC: 3 | RNVC: 2

6 Mar 2002

5120-14-521-6629
Seal Inserter

145216629
1608053: RNCC: 3 | RNVC: 2

1 Sep 2000

5120-14-478-4737
Seal Inserter

144784737
60927595: RNCC: 3 | RNVC: 2
89467899: RNCC: 5 | RNVC: 2

8 Nov 1995

5120-14-280-4167
Mechanical Puller

142804167
A124154: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-316-4992
Mechanical Puller

143164992
0U50121: RNCC: 3 | RNVC: 2
50121: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-205-6893
Mechanical Puller

142056893
VIB: RNCC: 3 | RNVC: 2
ZINVIB: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-387-0256
Driftpin

143870256
435818: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-205-6897
Mechanical Puller

142056897
TIB: RNCC: 3 | RNVC: 2
ZINTIB: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-489-5850
Mechanical Puller

144895850
1293.31807: RNCC: 3 | RNVC: 2

6 Aug 1997

5120-14-384-3344
Box Wrench

143843344
35AM027: RNCC: 3 | RNVC: 2

4 May 1983

5120-14-227-6368
Torque Wrench

142276368
251-00103-003: RNCC: 3 | RNVC: 2
251-00103-003: RNCC: 5 | RNVC: 2
N113: RNCC: 5 | RNVC: 2

1 Jan 1966

5120-14-420-8764
Torque Wrench

144208764
16965920: RNCC: 3 | RNVC: 2
16965920: RNCC: 5 | RNVC: 9

22 Dec 1987

5120-14-374-0878
Torque Wrench

143740878
UHB301-44: RNCC: 3 | RNVC: 2

8 Dec 1981

5120-14-524-1047
Torque Wrench

145241047
K.208A: RNCC: 3 | RNVC: 2
030980: RNCC: 5 | RNVC: 2
3148510309804: RNCC: 5 | RNVC: 2

28 Feb 2001

5120-14-231-8456
Torque Wrench

142318456
C108-80: RNCC: 3 | RNVC: 2
9970-111-114: RNCC: 5 | RNVC: 2
85-616-7800: RNCC: 6 | RNVC: 9

1 Jan 1967

5120-14-544-9528
Torque Wrench

145449528
10-511-42: RNCC: 3 | RNVC: 2

8 Mar 2005

5120-14-489-3899
Torque Wrench

144893899
3246-877-000: RNCC: 3 | RNVC: 2
8006893L00: RNCC: 5 | RNVC: 2
3246-877-000: RNCC: 5 | RNVC: 9

16 Jul 1997

5120-14-325-9643
Torque Wrench

143259643
TEC175: RNCC: 3 | RNVC: 2
TEC175: RNCC: 5 | RNVC: 2
85-688-1815: RNCC: 6 | RNVC: 9

2 Jul 1975

5120-14-549-1555
Torque Wrench

145491555
TB25+TNC9/16INCH: RNCC: 3 | RNVC: 2

6 Mar 2006

5120-14-317-9236
Torque Wrench

143179236
330A95-0012-00: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-528-2666
Torque Wrench

145282666
SP6885: RNCC: 3 | RNVC: 2

16 Jan 2002

5120-14-518-8212
Torque Wrench

145188212
S.305R: RNCC: 3 | RNVC: 2
3059002220: RNCC: 5 | RNVC: 2
S.305.R: RNCC: 5 | RNVC: 2

21 Feb 2000

5120-14-471-9259
Torque Wrench

144719259
DF57-095-02: RNCC: 3 | RNVC: 2

28 Sep 1994

5120-14-345-3101
Torque Wrench

143453101
M31-103: RNCC: 3 | RNVC: 2
M31103: RNCC: 5 | RNVC: 2

5 Oct 1977

5120-14-466-5644
Torque Wrench

144665644
R.300: RNCC: 3 | RNVC: 2
3148515122903: RNCC: 5 | RNVC: 2
R300: RNCC: 5 | RNVC: 2

16 Nov 1993

5120-14-549-7320
Torque Wrench

145497320
A.404: RNCC: 3 | RNVC: 2
91840089: RNCC: 5 | RNVC: 2

4 May 2006

5120-14-394-8877
Torque Wrench

143948877
403744: RNCC: 3 | RNVC: 2
403744: RNCC: 5 | RNVC: 9

2 Oct 1984

5120-14-551-0208
Torque Wrench

145510208
D.150-3: RNCC: 3 | RNVC: 2

21 Aug 2006

5120-14-487-6647
Torque Wrench

144876647
8969-70001: RNCC: 3 | RNVC: 2

18 Apr 1997

5120-14-224-2948
Torque Wrench

142242948
0.3: RNCC: 3 | RNVC: 2
03: RNCC: 5 | RNVC: 2
0-3: RNCC: 5 | RNVC: 2
3272670245303: RNCC: 5 | RNVC: 2

1 Jan 1966

5120-14-503-5840
Torque Wrench

145035840
J.206-50VSE: RNCC: 3 | RNVC: 2
3148510288833: RNCC: 5 | RNVC: 2

21 Jan 1998

5120-14-236-2446
Torque Wrench

142362446
V2-95-017-02: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-547-1070
Torque Wrench

145471070
K.202B: RNCC: 3 | RNVC: 2
3148515067105: RNCC: 5 | RNVC: 2

23 Sep 2005

5120-14-532-4602
Torque Wrench

145324602
A343: RNCC: 3 | RNVC: 2

4 Nov 2002

5120-14-408-7382
Torque Wrench

144087382
2-20DSL: RNCC: 3 | RNVC: 2

2 Apr 1986

5120-14-278-3187
Torque Wrench

142783187
R200: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-421-2783
Torque Wrench

144212783
414143A: RNCC: 3 | RNVC: 2
0414143A00: RNCC: 5 | RNVC: 2

14 Jan 1988

5120-14-420-8805
Torque Wrench

144208805
96104079: RNCC: 3 | RNVC: 2
96104079: RNCC: 5 | RNVC: 9

22 Dec 1987

5120-14-420-8801
Torque Wrench

144208801
96104076: RNCC: 3 | RNVC: 2
96104076: RNCC: 5 | RNVC: 9

22 Dec 1987

5120-14-465-8420
Torque Wrench

144658420
1047011W00: RNCC: 3 | RNVC: 2

14 Oct 1993

5120-14-434-1190
Pin Remover

144341190
608877: RNCC: 3 | RNVC: 2

6 Sep 1989

5120-14-475-1617
Torque Wrench

144751617
SP5628: RNCC: 3 | RNVC: 2

22 Mar 1995

5120-14-475-1614
Torque Wrench

144751614
M412100A1603A01: RNCC: 3 | RNVC: 2

22 Mar 1995

5120-14-447-3458
Torque Wrench

144473458
NO PRIMARY REF14-447-3458: RNCC: 3 | RNVC: 2
0515010: RNCC: 5 | RNVC: 2
S.312: RNCC: 5 | RNVC: 2
S312: RNCC: 5 | RNVC: 2
91714861: RNCC: 5 | RNVC: 2
S.312: RNCC: 5 | RNVC: 2

15 May 1991

5120-14-444-8950
Torque Wrench

144448950
0882641T00: RNCC: 3 | RNVC: 2

28 Jan 1991

5120-14-525-9419
Torque Wrench

145259419
888-404-900-2: RNCC: 3 | RNVC: 2

20 Jun 2001

5120-14-462-8956
Torque Wrench

144628956
R.250A: RNCC: 3 | RNVC: 2
3148510529202: RNCC: 5 | RNVC: 2
R250A: RNCC: 5 | RNVC: 2
91743474: RNCC: 5 | RNVC: 2
0052920: RNCC: 5 | RNVC: 9

5 May 1993

5120-14-294-3546
Mechanical Puller

142943546
8810007067: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-321-2178
Mechanical Puller

143212178
0M435: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-254-4910
Mechanical Puller

142544910
TIR: RNCC: 3 | RNVC: 2
ZINTIR: RNCC: 5 | RNVC: 9

1 Jan 1969

5120-14-406-7837
Mechanical Puller

144067837
TZ698: RNCC: 3 | RNVC: 2
TZ698: RNCC: 5 | RNVC: 9

8 Jan 1986

5120-14-544-1429
Seal Inserter

145441429
27981280K: RNCC: 3 | RNVC: 2

5 Jan 2005

5120-14-429-1476
Mechanical Puller

144291476
540496: RNCC: 3 | RNVC: 2

11 Jan 1989

5120-14-449-8746
Box Wrench

144498746
60715: RNCC: 3 | RNVC: 2
91705851: RNCC: 5 | RNVC: 2

11 Sep 1991

5120-14-288-4166
Mechanical Puller

142884166
8810120023: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-468-2383
Mechanical Puller

144682383
365124: RNCC: 3 | RNVC: 2
203245: RNCC: 3 | RNVC: 2

16 Feb 1994

5120-14-416-3148
Mechanical Puller

144163148
36737A: RNCC: 3 | RNVC: 2
41997A: RNCC: 3 | RNVC: 9
36737: RNCC: 5 | RNVC: 2
41997: RNCC: 5 | RNVC: 9

3 Jun 1987

5120-14-541-0228
Float

145410228
6136270001: RNCC: 3 | RNVC: 2
3303806136025: RNCC: 5 | RNVC: 2

5 May 2004

5120-14-549-3250
Mechanical Puller

145493250
45125087: RNCC: 3 | RNVC: 2

22 Mar 2006

5120-14-548-6384
Mechanical Puller

145486384
F26641000: RNCC: 3 | RNVC: 2
F26641000: RNCC: 5 | RNVC: 2

27 Jan 2006

5120-14-507-3362
Box Wrench

145073362
NNP5120878750464: RNCC: 3 | RNVC: 2

29 Jun 1998

5120-14-401-2639
Aligning Punch

144012639
101168: RNCC: 3 | RNVC: 2

5 Jun 1985

5120-14-427-4925
Mechanical Puller

144274925
16806612: RNCC: 3 | RNVC: 2
16806612: RNCC: 3 | RNVC: 9

20 Oct 1988

5120-14-274-9760
Mechanical Puller

142749760
4537: RNCC: 3 | RNVC: 9

1 Jan 1971

5120-14-546-6657
Box Wrench

145466657
55A.16X17: RNCC: 3 | RNVC: 2
55A.16X17: RNCC: 5 | RNVC: 2

27 Jul 2005

5120-14-282-0734
Wood Mallet

142820734
6BULBINGAMANCHEFRENE: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-507-4719
Machinist's Vise

145074719
746M20: RNCC: 3 | RNVC: 2

16 Jul 1998

5120-14-377-1836
Mechanical Puller

143771836
224424: RNCC: 3 | RNVC: 2
00058448: RNCC: 5 | RNVC: 2
058448: RNCC: 5 | RNVC: 2

17 May 1982

5120-14-451-7737
Mechanical Puller

144517737
536825: RNCC: 3 | RNVC: 2

4 Dec 1991

5120-14-550-0803
Drive Pin Punch Set

145500803
8420 S3: RNCC: 3 | RNVC: 2
00.08.22.46: RNCC: 5 | RNVC: 2

1 Jun 2006

5120-14-387-2230
Drill Drift

143872230
5562: RNCC: 3 | RNVC: 2
5562: RNCC: 5 | RNVC: 9

15 Sep 1983

5120-14-432-7069
Seal Inserter

144327069
OUT11816: RNCC: 3 | RNVC: 2
0UT11816: RNCC: 5 | RNVC: 2

21 Jun 1989

5120-14-551-0065
Mechanical Puller

145510065
F47127: RNCC: 3 | RNVC: 2

18 Aug 2006

5120-14-429-1444
Mechanical Puller

144291444
537599: RNCC: 3 | RNVC: 2

11 Jan 1989

5120-14-469-4568
Torque Wrench

144694568
40N99101: RNCC: 3 | RNVC: 2

27 Apr 1994

5120-14-303-2709
Torque Wrench

143032709
NO PRIMARY REF14-303-2709: RNCC: 3 | RNVC: 2
ETERNUMJ108: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-270-5809
Torque Wrench

142705809
THD2-07A55MKG: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-420-8744
Torque Wrench

144208744
16965914: RNCC: 3 | RNVC: 2
16965914: RNCC: 5 | RNVC: 9

22 Dec 1987

5120-14-423-7932
Torque Wrench

144237932
R282300: RNCC: 3 | RNVC: 2

28 Apr 1988

5120-14-265-6319
Pin Remover

142656319
476814: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-523-9127
Torque Wrench

145239127
TC3196G001: RNCC: 3 | RNVC: 2

13 Feb 2001

5120-14-461-2828
Torque Wrench

144612828
NO PRIMARY REF14-461-2828: RNCC: 3 | RNVC: 2
0500235: RNCC: 5 | RNVC: 2
A.302: RNCC: 5 | RNVC: 2
91643104: RNCC: 5 | RNVC: 2
0001258: RNCC: 5 | RNVC: 2
A-302: RNCC: 5 | RNVC: 2
A302: RNCC: 5 | RNVC: 2

3 Mar 1993

5120-14-543-3297
Torque Wrench

145433297
10649936: RNCC: 3 | RNVC: 2

20 Oct 2004

5120-14-444-8984
Torque Wrench

144448984
0882648D00: RNCC: 3 | RNVC: 2

28 Jan 1991

5120-14-554-6598
Torque Wrench

145546598
TBF 100: RNCC: 3 | RNVC: 2

1 Aug 2007

5120-14-482-0076
Mechanical Puller

144820076
10319336: RNCC: 3 | RNVC: 2

13 Jun 1996

5120-14-273-8746
Lamp Extractor

142738746
725061000: RNCC: 3 | RNVC: 2
725061000: RNCC: 5 | RNVC: 2
8855: RNCC: 5 | RNVC: 2
8855: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-410-0141
Seal Inserter

144100141
8813112000: RNCC: 3 | RNVC: 2

4 Jun 1986

5120-14-303-6311
Box Wrench

143036311
0D2-24: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-460-7601
Mechanical Puller

144607601
K5107R10003: RNCC: 3 | RNVC: 2

8 Feb 1993

5120-14-554-8009
Nail Set Assortment

145548009
427 P2 CVC: RNCC: 3 | RNVC: 2

27 Aug 2007

5120-14-421-3278
Mechanical Puller

144213278
523042: RNCC: 3 | RNVC: 2

14 Jan 1988

5120-14-468-9841
Mechanical Puller

144689841
40N108382: RNCC: 3 | RNVC: 2

30 Mar 1994

5120-14-454-0082
Seal Inserter

144540082
OUT60414: RNCC: 3 | RNVC: 2
0UT60414: RNCC: 5 | RNVC: 2

19 Mar 1992

5120-14-041-6956
Mechanical Puller

140416956
8811658000: RNCC: 3 | RNVC: 2
7M123CK: RNCC: 5 | RNVC: 2

1 Jan 1974

5120-14-469-9040
Box Wrench

144699040
55.16VSE: RNCC: 3 | RNVC: 2
3148511123461: RNCC: 5 | RNVC: 2
0112346: RNCC: 5 | RNVC: 9

18 May 1994

5120-14-359-0456
Socket Wrench

143590456
75.3/4: RNCC: 3 | RNVC: 2
3148511203606: RNCC: 5 | RNVC: 2
75 3-4: RNCC: 5 | RNVC: 2
75-3-4: RNCC: 5 | RNVC: 2
0120360: RNCC: 5 | RNVC: 9

7 Sep 1979

5120-14-410-3524
Mechanical Puller

144103524
8812778000: RNCC: 3 | RNVC: 2

18 Jun 1986

5120-14-255-2725
Box Wrench

142552725
510527: RNCC: 3 | RNVC: 2

1 Jan 1969

5120-14-555-5985
Mechanical Puller

145555985
14080: RNCC: 3 | RNVC: 2

30 Nov 2007

5120-14-366-8465
Driftpin

143668465
30MS087-807GZ: RNCC: 3 | RNVC: 2

20 Nov 1980

5120-14-381-6571
Mechanical Puller

143816571
5000260812: RNCC: 3 | RNVC: 2
0000334233: RNCC: 5 | RNVC: 2
334233: RNCC: 5 | RNVC: 9

25 Jan 1983

5120-14-532-7102
Socket Wrench Set

145327102
S.447DP: RNCC: 3 | RNVC: 2
8038952S00: RNCC: 5 | RNVC: 2

4 Dec 2002

5120-14-273-7091
Hand Hammer Head

142737091
211-42: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-548-9186
Hand Hammer

145489186
400008: RNCC: 3 | RNVC: 2

23 Feb 2006

5120-14-386-1595
Mechanical Puller

143861595
6801P32-4059-20: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-468-5671
Socket Wrench

144685671
877619: RNCC: 3 | RNVC: 2
877619: RNCC: 5 | RNVC: 2

9 Mar 1994

5120-14-400-0274
Socket Wrench

144000274
4771521300: RNCC: 3 | RNVC: 2

24 Apr 1985

5120-14-535-5413
Drain Plug Wrench

145355413
5000262968: RNCC: 3 | RNVC: 2

3 Jun 2003

5120-14-549-5817
Socket Wrench Set

145495817
S.441EP: RNCC: 3 | RNVC: 2

19 Apr 2006

5120-14-516-8107
Drive Pin Punch

145168107
300285-0: RNCC: 3 | RNVC: 2

18 Oct 1999

5120-14-473-3520
Mechanical Puller

144733520
P607852: RNCC: 3 | RNVC: 2

13 Dec 1994

5120-14-309-0282
Socket Wrench

143090282
92.4: RNCC: 3 | RNVC: 2
3148511278208: RNCC: 5 | RNVC: 2
92-4: RNCC: 5 | RNVC: 2
91392549: RNCC: 5 | RNVC: 2
0127820: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-317-0456
Socket Wrench

143170456
RT5505: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-507-3365
Open End Box Wrench

145073365
NNP5120878750460: RNCC: 3 | RNVC: 2

29 Jun 1998

5120-14-224-9997
Socket Wrench

142249997
170270: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-522-3870
Socket Wrench

145223870
TC3279G001: RNCC: 3 | RNVC: 2

25 Oct 2000

5120-14-536-0537
Socket Wrench Set

145360537
91.JE8: RNCC: 3 | RNVC: 2

9 Jul 2003

5120-14-322-8156
Socket Wrench

143228156
55KMS246: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-447-9984
Piston Inserter

144479984
A37638L: RNCC: 3 | RNVC: 2

12 Jun 1991

5120-14-411-9137
Mechanical Puller

144119137
14189890T: RNCC: 3 | RNVC: 2

16 Sep 1986

5120-14-392-8519
Mechanical Puller

143928519
220521: RNCC: 3 | RNVC: 2

7 Apr 1984

5120-14-319-9829
Drive Pin Punch

143199829
7-35N: RNCC: 3 | RNVC: 2
3272670227354: RNCC: 5 | RNVC: 2
7-35: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-420-9700
Tack Claw

144209700
259A300: RNCC: 3 | RNVC: 2

6 Jan 1988

5120-14-531-8746
Mechanical Puller

145318746
D.98A22: RNCC: 3 | RNVC: 2
3148510181875: RNCC: 5 | RNVC: 2

25 Sep 2002

5120-14-219-0610
Socket Wrench

142190610
34080: RNCC: 3 | RNVC: 2
34080: RNCC: 3 | RNVC: 9
301200016: RNCC: 5 | RNVC: 9
35966: RNCC: 5 | RNVC: 9
R301200016: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-341-3184
Oil Filter Wrench

143413184
055W02-519936B: RNCC: 3 | RNVC: 2
0519936B00: RNCC: 5 | RNVC: 2

16 Mar 1977

5120-14-442-5335
Mechanical Puller

144425335
177116: RNCC: 3 | RNVC: 2

17 Oct 1990

5120-14-550-5991
Drive Pin Punch Set

145505991
217.GJ1: RNCC: 3 | RNVC: 2
217.GJ1: RNCC: 5 | RNVC: 2

29 Jun 2006

5120-14-524-4192
Mechanical Puller

145244192
6505POC: RNCC: 3 | RNVC: 2

16 Mar 2001

5120-14-330-9743
Socket Wrench

143309743
BM763: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-323-2067
Open End Box Wrench

143232067
103-7-8X1: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-510-6873
Box Wrench

145106873
PB.MOD55-2: RNCC: 3 | RNVC: 2

4 Nov 1998

5120-14-528-8020
Screw Extractor Set

145288020
285.4/285.6: RNCC: 3 | RNVC: 2
SYQ0811: RNCC: 5 | RNVC: 2
0165000/0165040: RNCC: 5 | RNVC: 9

15 Feb 2002

5120-14-484-9137
Plastic Mallet

144849137
0536840: RNCC: 3 | RNVC: 2
208A-60BB: RNCC: 5 | RNVC: 2
208A.60BB: RNCC: 5 | RNVC: 2
3148511477649: RNCC: 5 | RNVC: 2

12 Dec 1996

5120-14-441-2256
Mechanical Puller

144412256
6802V32-2104-00: RNCC: 3 | RNVC: 2

22 Aug 1990

5120-14-339-0177
Box Wrench

143390177
50.64: RNCC: 3 | RNVC: 2
3148511069004: RNCC: 5 | RNVC: 2
50-64: RNCC: 5 | RNVC: 2
0106900: RNCC: 5 | RNVC: 9

17 Dec 1976

5120-14-254-8046
Socket Wrench

142548046
T34BBH4BREP31: RNCC: 3 | RNVC: 2
T0553BBH4BPC31: RNCC: 5 | RNVC: 2

1 Jan 1969

5120-14-513-3388
Hand Rivet Set

145133388
47067122: RNCC: 3 | RNVC: 2

16 Mar 1999

5120-14-257-1796
Hand Screw Jack

142571796
0870380200: RNCC: 3 | RNVC: 2
0870380200: RNCC: 5 | RNVC: 9

1 Jan 1969

5120-14-525-6691
Jaw Cable Grip

145256691
20 242 050 4230: RNCC: 3 | RNVC: 2
242 050 4230: RNCC: 5 | RNVC: 2

14 Jun 2001

5120-14-232-7909
Ratchet Wrench

142327909
4141-20: RNCC: 3 | RNVC: 9

1 Jan 1967

5120-14-541-3265
Machinist's Vise

145413265
4440-02: RNCC: 3 | RNVC: 2

27 May 2004

5120-14-329-6382
Box Wrench

143296382
MHC228-22: RNCC: 3 | RNVC: 2
MHC228-22: RNCC: 5 | RNVC: 2
MHC228-22-00: RNCC: 5 | RNVC: 2

2 Jul 1975

5120-14-453-7548
Hand Vise Jaw

144537548
2085-09-002: RNCC: 3 | RNVC: 2
89411742: RNCC: 5 | RNVC: 9

5 Mar 1992

5120-14-210-9837
Socket Wrench

142109837
80-38P: RNCC: 3 | RNVC: 2
122 C 38: RNCC: 3 | RNVC: 9
80-38: RNCC: 5 | RNVC: 2
3107238: RNCC: 5 | RNVC: 2
SYQ0749: RNCC: 5 | RNVC: 2
122-38: RNCC: 5 | RNVC: 9
DEM122 C 38: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-441-2320
Socket Wrench

144412320
6806V32-2155-00: RNCC: 3 | RNVC: 2

22 Aug 1990

5120-14-314-2334
Box Wrench

143142334
160-71960-29: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-446-1005
Mechanical Puller

144461005
853-203-087-0: RNCC: 3 | RNVC: 2

6 Mar 1991

5120-14-425-9449
Aligning Punch

144259449
TH20C2-1-5A4: RNCC: 3 | RNVC: 2

28 Jul 1988

5120-14-361-4923
Aligning Punch

143614923
8813212000: RNCC: 3 | RNVC: 2
85-691-1811: RNCC: 6 | RNVC: 9

24 Jan 1980

5120-14-207-8441
Gasoline Blowtorch

142078441
790: RNCC: 3 | RNVC: 2
3956-257: RNCC: 3 | RNVC: 9
2375-352: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-534-4886
Rivet Bucking Bar

145344886
VHP500-102-1: RNCC: 3 | RNVC: 2

26 Mar 2003

5120-14-268-5202
Drive Pin Punch

142685202
GEGM60098-36HS: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-201-3174
Hand Hammer

142013174
NO PRIMARY REF14-201-3174: RNCC: 3 | RNVC: 2
F301E35: RNCC: 5 | RNVC: 9
F301E35: RNCC: 5 | RNVC: 9

1 Jan 1962

5120-14-456-8465
Crimping Tool Die

144568465
576715: RNCC: 3 | RNVC: 2
85-694-5822: RNCC: 6 | RNVC: 9

24 Jul 1992

5120-14-247-8016
Mechanical Puller

142478016
3210-95-34-040-1: RNCC: 3 | RNVC: 2
3210-95-34-040-1: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-532-0275
Mechanical Puller

145320275
888-459-000-1: RNCC: 3 | RNVC: 2
888-459-000-1: RNCC: 5 | RNVC: 2

9 Oct 2002

5120-14-314-1570
Socket Wrench

143141570
92.30: RNCC: 3 | RNVC: 2
168-30: RNCC: 3 | RNVC: 9
B12005: RNCC: 5 | RNVC: 2
3148511281000: RNCC: 5 | RNVC: 2
92-30: RNCC: 5 | RNVC: 2
0128100: RNCC: 5 | RNVC: 9
DEM168-30: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-224-7456
Socket Wrench

142247456
0117340: RNCC: 3 | RNVC: 2
72.32: RNCC: 5 | RNVC: 2
72-32: RNCC: 5 | RNVC: 2

1 Jan 1966

5120-14-447-1311
Box Wrench

144471311
851-190-021-0: RNCC: 3 | RNVC: 2

3 May 1991

5120-14-480-9767
Mechanical Puller

144809767
853-203-157-0: RNCC: 3 | RNVC: 2

11 Apr 1996

5120-14-415-0707
Socket Wrench

144150707
2-29468: RNCC: 3 | RNVC: 2

26 Mar 1987

5120-14-416-4999
Pawl

144164999
1840-1: RNCC: 3 | RNVC: 2

10 Jun 1987

5120-14-432-7058
Seal Inserter

144327058
OUT11763: RNCC: 3 | RNVC: 2
0UT11763: RNCC: 5 | RNVC: 2

21 Jun 1989

5120-14-539-2231
Ratchet Screwdriver

145392231
692 203 031 001: RNCC: 3 | RNVC: 2
227402000: RNCC: 3 | RNVC: 2

15 Dec 2003

5120-14-268-8399
Caulking Mallet

142688399
12-13: RNCC: 2 | RNVC: 2

1 Jan 1970

5120-14-546-9136
Hand Shovel

145469136
052010: RNCC: 3 | RNVC: 2

7 Sep 2005

5120-14-395-3430
Woodworker's Vise

143953430
G25HS: RNCC: 3 | RNVC: 2

2 Oct 1984

5120-14-391-3285
Mechanical Puller

143913285
ER8244300337: RNCC: 3 | RNVC: 2

1 Mar 1984

5120-14-548-4235
Mechanical Puller

145484235
U.49L: RNCC: 3 | RNVC: 2

16 Jan 2006

5120-14-242-2232
Mechanical Puller

142422232
U21: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-530-6430
Seal Inserter

145306430
D47731R5: RNCC: 3 | RNVC: 2

1 Jul 2002

5120-14-369-6977
Pinch Bar

143696977
C7: RNCC: 3 | RNVC: 9

17 Apr 1981

5120-14-530-2989
Hand Hammer

145302989
205.F30: RNCC: 3 | RNVC: 2
3148511471326: RNCC: 5 | RNVC: 2
205.F30: RNCC: 5 | RNVC: 2

29 May 2002

5120-14-481-4824
Mechanical Puller

144814824
NO PRIMARY REF14-481-4824: RNCC: 3 | RNVC: 2
806285: RNCC: 5 | RNVC: 9

8 May 1996

5120-14-482-0796
Mechanical Puller

144820796
U.320: RNCC: 3 | RNVC: 2
3148510753508: RNCC: 5 | RNVC: 2
91712331: RNCC: 5 | RNVC: 2
91712331: RNCC: 5 | RNVC: 2
0075350: RNCC: 5 | RNVC: 9

20 Jun 1996

5120-14-555-3673
Ratchet Wrench

145553673
64.17X19: RNCC: 3 | RNVC: 2
742485: RNCC: 3 | RNVC: 2
3148517424852: RNCC: 5 | RNVC: 2

31 Oct 2007

5120-14-461-6880
Socket Wrench

144616880
74.T14: RNCC: 3 | RNVC: 2
3148511195604: RNCC: 5 | RNVC: 2
0715 33 08: RNCC: 5 | RNVC: 2

22 Mar 1993

5120-14-379-2919
Socket Wrench

143792919
3-19787: RNCC: 3 | RNVC: 2

6 Sep 1982

5120-14-371-6440
Socket Wrench

143716440
19307043: RNCC: 3 | RNVC: 2
19307043: RNCC: 5 | RNVC: 9

5 Aug 1981

5120-14-534-1837
Digging Bar

145341837
1521206: RNCC: 3 | RNVC: 2

14 Mar 2003

5120-14-425-9573
Aligning Punch

144259573
502186PTH20R2: RNCC: 3 | RNVC: 2

28 Jul 1988

5120-14-531-1888
Hand Hammer

145311888
148655: RNCC: 3 | RNVC: 2
213.F30: RNCC: 5 | RNVC: 2
3148511486559: RNCC: 5 | RNVC: 2

31 Jul 2002

5120-14-402-0627
Mechanical Puller

144020627
099545B: RNCC: 3 | RNVC: 2

26 Jun 1985

5120-14-424-4259
Socket Wrench

144244259
160G742118: RNCC: 3 | RNVC: 2

19 May 1988

5120-14-294-3521
Mechanical Puller

142943521
8810480000: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-434-3215
Seal Inserter

144343215
OUT50392: RNCC: 3 | RNVC: 2
0UT50392: RNCC: 5 | RNVC: 2

20 Sep 1989

5120-14-218-6720
Socket Wrench

142186720
1188: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-451-5095
Mechanical Puller

144515095
537035: RNCC: 3 | RNVC: 2

21 Nov 1991

5120-14-401-5194
Drive Pin Punch Set

144015194
246.JS6: RNCC: 3 | RNVC: 2
0538780: RNCC: 5 | RNVC: 2
246JS6: RNCC: 5 | RNVC: 2
3148515387807: RNCC: 5 | RNVC: 2
91598448: RNCC: 5 | RNVC: 2

13 Jun 1985

5120-14-235-6960
Socket Wrench

142356960
21451: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-316-4989
Mechanical Puller

143164989
0U50099: RNCC: 3 | RNVC: 2
50099: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-309-4794
Box Wrench Set

143094794
55.JE8: RNCC: 3 | RNVC: 2
3148515305801: RNCC: 5 | RNVC: 2
55JE8: RNCC: 5 | RNVC: 2
0530580: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-431-7801
Socket Wrench

144317801
0411-60163: RNCC: 3 | RNVC: 2

10 May 1989

5120-14-471-8473
Socket Wrench

144718473
39559544: RNCC: 3 | RNVC: 2
39559544: RNCC: 5 | RNVC: 9

21 Sep 1994

5120-14-541-6551
Socket Wrench

145416551
BS16R1: RNCC: 3 | RNVC: 2

17 Jun 2004

5120-14-530-2404
Socket Wrench

145302404
Y00005380: RNCC: 3 | RNVC: 2
Y00005380: RNCC: 5 | RNVC: 9

22 May 2002

5120-14-307-9072
Lamp Extractor

143079072
CMA2-2: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-551-4158
Mechanical Puller

145514158
U.49PJ1: RNCC: 3 | RNVC: 2

19 Sep 2006

5120-14-436-4261
Hand Hammer

144364261
204-40EC: RNCC: 3 | RNVC: 2
0204400301: RNCC: 3 | RNVC: 2

3 Jan 1990

5120-14-264-3434
Blacksmiths' Tongs

142643434
3803-20: RNCC: 3 | RNVC: 9

1 Jan 1970

5120-14-483-0676
Machinist's Scriber

144830676
234.S: RNCC: 3 | RNVC: 2
3148511547106: RNCC: 5 | RNVC: 2
0154710: RNCC: 5 | RNVC: 9
257600007: RNCC: 5 | RNVC: 9

8 Aug 1996

5120-14-276-2910
Socket Wrench

142762910
4056: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-472-0781
Hand Hammer

144720781
ZF4455506: RNCC: 3 | RNVC: 9

5 Oct 1994

5120-14-466-0003
Seal Inserter

144660003
0XB501-211-861-01: RNCC: 3 | RNVC: 2

27 Oct 1993

5120-14-032-0953
Mechanical Puller

140320953
341A93-3109-00: RNCC: 3 | RNVC: 2

5 Jul 1980

5120-14-547-0336
Spanner Wrench Set

145470336
633899: RNCC: 3 | RNVC: 2
91807243: RNCC: 5 | RNVC: 2

15 Sep 2005

5120-14-546-2228
Crimping Tool Die

145462228
32030-5: RNCC: 3 | RNVC: 2

15 Jun 2005

5120-14-334-8734
Box Wrench

143348734
57-7-16X1-2: RNCC: 3 | RNVC: 2
85-688-5202: RNCC: 6 | RNVC: 9

2 Jun 1976

5120-14-485-8838
Socket Wrench

144858838
K7739-NERVUS7/8X1WW: RNCC: 3 | RNVC: 2
NERVUS7/8X1WW: RNCC: 5 | RNVC: 2

19 Feb 1997

5120-14-466-4935
Aligning Punch

144664935
851-300-129-0: RNCC: 3 | RNVC: 2

15 Nov 1993

5120-14-404-1098
Socket Wrench

144041098
80-14-P: RNCC: 3 | RNVC: 2
80-14P: RNCC: 3 | RNVC: 2
3272670253353: RNCC: 5 | RNVC: 2
80-14CP: RNCC: 5 | RNVC: 9

11 Sep 1985

5120-14-042-1433
Ratchet Wrench

140421433
22-06: RNCC: 3 | RNVC: 2
22-06: RNCC: 5 | RNVC: 2

18 Jan 1977

5120-14-273-7545
Farrier's Pincers

142737545
E73-102-330RDINAIRE: RNCC: 2 | RNVC: 2

1 Jan 1971

5120-14-440-5490
Hand Rivet Set

144405490
NO PRIMARY REF14-440-5490: RNCC: 3 | RNVC: 2
507933: RNCC: 5 | RNVC: 9
507933: RNCC: 5 | RNVC: 9
85-694-1075: RNCC: 6 | RNVC: 9

17 Jul 1990

5120-14-516-9014
Ratchet Wrench

145169014
64.1/4X5/16: RNCC: 3 | RNVC: 2
68B.1/4X5/16: RNCC: 3 | RNVC: 9
00.28.27.14: RNCC: 5 | RNVC: 2
3148517428218: RNCC: 5 | RNVC: 2

20 Oct 1999

5120-14-392-0821
Open End Box Wrench

143920821
853-100-063-0: RNCC: 3 | RNVC: 2

21 Mar 1984

5120-14-521-5789
Socket Wrench

145215789
C2M-99-12.14: RNCC: 3 | RNVC: 2
093-910-351-0: RNCC: 5 | RNVC: 2

23 Aug 2000

5120-14-408-9612
Mechanical Puller

144089612
853-201-091-0: RNCC: 3 | RNVC: 2

9 Apr 1986

5120-14-333-8768
Socket Wrench

143338768
M31-039: RNCC: 3 | RNVC: 2

23 Apr 1976

5120-14-218-9633
Socket Wrench

142189633
72-3/8: RNCC: 3 | RNVC: 2
80 3/8: RNCC: 3 | RNVC: 2
72 3-8: RNCC: 5 | RNVC: 2
80 3-8: RNCC: 5 | RNVC: 2

1 Jan 1965

5120-14-309-7435
Mechanical Puller

143097435
341A93-3518-00: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-232-2498
Screw Extractor

142322498
885E3: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-394-3307
Socket Wrench

143943307
8811440005: RNCC: 3 | RNVC: 2

28 Aug 1984

5120-14-378-2807
Driftpin

143782807
2-19076: RNCC: 3 | RNVC: 2

20 Jul 1982

5120-14-419-2661
Hand Rivet Set

144192661
536664: RNCC: 3 | RNVC: 2

16 Oct 1987

5120-14-343-9659
Open End Box Wrench

143439659
37-8X9: RNCC: 3 | RNVC: 2
85-647-3370: RNCC: 6 | RNVC: 9

13 Jul 1977

5120-14-359-9030
Driftpin

143599030
2-16858: RNCC: 3 | RNVC: 2

15 Oct 1979

5120-14-434-6036
Hand Hammer

144346036
0204640301: RNCC: 3 | RNVC: 2
204-64EC: RNCC: 3 | RNVC: 2

26 Sep 1989

5120-14-458-4593
Torque Wrench

144584593
29079091: RNCC: 3 | RNVC: 2

23 Oct 1992

5120-14-554-6517
Torque Wrench

145546517
74 Z-0-0-321: RNCC: 3 | RNVC: 2
22651994: RNCC: 5 | RNVC: 2
74 Z-0-0-321: RNCC: 5 | RNVC: 2
22651994: RNCC: 5 | RNVC: 2

1 Aug 2007

5120-14-460-0440
Pin Remover

144600440
45056154: RNCC: 3 | RNVC: 2
45056154: RNCC: 5 | RNVC: 9

7 Jan 1993

5120-14-401-4182
Torque Wrench

144014182
330A98-2064-00: RNCC: 3 | RNVC: 2

5 Jun 1985

5120-14-450-6749
Pin Remover

144506749
393428: RNCC: 3 | RNVC: 2
393428: RNCC: 5 | RNVC: 9

16 Oct 1991

5120-14-377-5587
Torque Wrench

143775587
NO PRIMARY REF14-377-5587: RNCC: 3 | RNVC: 2
R303: RNCC: 5 | RNVC: 2
R303A: RNCC: 5 | RNVC: 2

17 May 1982

5120-14-543-4329
Torque Wrench

145434329
S.306-200D: RNCC: 3 | RNVC: 2
1082071C00: RNCC: 5 | RNVC: 2

28 Oct 2004

5120-14-420-8759
Torque Wrench

144208759
16965919: RNCC: 3 | RNVC: 2
16965919: RNCC: 5 | RNVC: 9

22 Dec 1987

5120-14-420-8811
Torque Wrench

144208811
96104098: RNCC: 3 | RNVC: 2
96104098: RNCC: 5 | RNVC: 9

22 Dec 1987

5120-14-423-2106
Torque Wrench

144232106
R282330: RNCC: 3 | RNVC: 2

12 Apr 1988

5120-14-374-0883
Torque Wrench

143740883
UHD303-42: RNCC: 3 | RNVC: 2

8 Dec 1981

5120-14-403-3473
Torque Wrench

144033473
2473T: RNCC: 3 | RNVC: 2
101220: RNCC: 5 | RNVC: 2

21 Aug 1985

5120-14-330-6553
Torque Wrench

143306553
NO PRIMARY REF14-330-6553: RNCC: 3 | RNVC: 2
S313: RNCC: 5 | RNVC: 2

2 Jul 1975

5120-14-417-1007
Pin Remover

144171007
530632: RNCC: 3 | RNVC: 2

1 Jul 1987

5120-14-483-8075
Torque Wrench

144838075
A.352A: RNCC: 3 | RNVC: 2
0500291: RNCC: 5 | RNVC: 2
3148515002915: RNCC: 5 | RNVC: 2
1121496C00: RNCC: 5 | RNVC: 2
0500290: RNCC: 5 | RNVC: 9

3 Oct 1996

5120-14-519-8551
Torque Wrench

145198551
F1390168: RNCC: 3 | RNVC: 2

12 Apr 2000

5120-14-204-8319
Torque Wrench

142048319
S305: RNCC: 3 | RNVC: 2

1 Jan 1963

5120-14-480-2287
Torque Wrench

144802287
R282303: RNCC: 3 | RNVC: 2
1099234L00: RNCC: 5 | RNVC: 2

28 Feb 1996

5120-14-459-6474
Torque Wrench

144596474
4A-670-01-W26H2: RNCC: 3 | RNVC: 2

10 Dec 1992

5120-14-456-8912
Torque Wrench

144568912
0446609S00: RNCC: 3 | RNVC: 2

29 Jul 1992

5120-14-461-1856
Torque Wrench

144611856
0500882: RNCC: 3 | RNVC: 2
CES.1210: RNCC: 5 | RNVC: 2
CES1210: RNCC: 5 | RNVC: 2

1 Mar 1993

5120-14-278-3188
Torque Wrench

142783188
J199: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-505-9268
Pin Remover

145059268
H117171: RNCC: 3 | RNVC: 2

30 Mar 1998

5120-14-374-0879
Torque Wrench

143740879
UHB302-45: RNCC: 3 | RNVC: 2

8 Dec 1981

5120-14-549-9409
Torque Wrench

145499409
S.208-200D: RNCC: 3 | RNVC: 2

18 May 2006

5120-14-304-2310
Pin Remover

143042310
20245: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-480-5128
Torque Wrench

144805128
0058714: RNCC: 3 | RNVC: 2
S.305D: RNCC: 5 | RNVC: 2
0514986: RNCC: 5 | RNVC: 2

14 Mar 1996

5120-14-404-1166
Torque Wrench

144041166
V-20S: RNCC: 3 | RNVC: 2
V20S: RNCC: 3 | RNVC: 2
3272670257535: RNCC: 5 | RNVC: 2

11 Sep 1985

5120-14-522-6700
Torque Wrench

145226700
1056352M00: RNCC: 3 | RNVC: 2

15 Nov 2000

5120-14-369-8424
Torque Wrench

143698424
NO PRIMARY REF14-369-8424: RNCC: 3 | RNVC: 2
A200B: RNCC: 5 | RNVC: 2

18 May 1981

5120-14-483-4278
Torque Wrench

144834278
NO PRIMARY REF14-483-4278: RNCC: 3 | RNVC: 2
A.321A: RNCC: 5 | RNVC: 2
A321A: RNCC: 5 | RNVC: 2
1092756M00: RNCC: 5 | RNVC: 2

12 Sep 1996

5120-14-246-8827
Torque Wrench

142468827
S108-40: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-264-1887
Torque Wrench

142641887
C108-50S: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-475-5630
Torque Wrench

144755630
S.206-200: RNCC: 3 | RNVC: 2
3148510577548: RNCC: 5 | RNVC: 2
2715 71 16: RNCC: 5 | RNVC: 2

18 Apr 1995

5120-14-406-5599
Torque Wrench

144065599
853-201-166-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-257-4135
Torque Wrench

142574135
S108-6: RNCC: 3 | RNVC: 2
9970-111-115: RNCC: 5 | RNVC: 2

1 Jan 1969

5120-14-420-8798
Torque Wrench

144208798
96104074: RNCC: 3 | RNVC: 2
96104074: RNCC: 5 | RNVC: 9

22 Dec 1987

5120-14-457-7915
Torque Wrench

144577915
1265-090C511: RNCC: 3 | RNVC: 2
1265-090C511: RNCC: 5 | RNVC: 2

23 Sep 1992

5120-14-350-0911
Torque Wrench

143500911
0-3AN: RNCC: 3 | RNVC: 2
03AN: RNCC: 5 | RNVC: 2
0-3AN: RNCC: 5 | RNVC: 2
03AN: RNCC: 5 | RNVC: 2
DYNAST0P0-3AN: RNCC: 5 | RNVC: 2
85-689-6685: RNCC: 6 | RNVC: 9

14 Jun 1978

5120-14-519-6166
Torque Wrench

145196166
RI/1-S.312: RNCC: 3 | RNVC: 2
S.312: RNCC: 5 | RNVC: 9

22 Mar 2000

5120-14-429-4480
Torque Wrench

144294480
AS5-5000DAN: RNCC: 3 | RNVC: 2
AS NO 6509: RNCC: 5 | RNVC: 2

24 Jan 1989

5120-14-031-3244
Torque Wrench

140313244
1.20: RNCC: 3 | RNVC: 2
99-250-45-019-3: RNCC: 5 | RNVC: 2
99250450193: RNCC: 5 | RNVC: 2
1-20: RNCC: 5 | RNVC: 2
3272670220522: RNCC: 5 | RNVC: 2
1-20D: RNCC: 5 | RNVC: 2
1-20D: RNCC: 5 | RNVC: 9
1-20NUE: RNCC: 5 | RNVC: 9

14 Jun 1980

5120-14-466-7541
Torque Wrench

144667541
NO PRIMARY REF14-466-7541: RNCC: 3 | RNVC: 2
S.316: RNCC: 5 | RNVC: 2
0515128: RNCC: 5 | RNVC: 2
S316-1: RNCC: 5 | RNVC: 2
91745202: RNCC: 5 | RNVC: 2
S316: RNCC: 5 | RNVC: 2
S.316-1: RNCC: 5 | RNVC: 2

24 Nov 1993

5120-14-224-4440
Torque Wrench

142244440
99250450192: RNCC: 3 | RNVC: 2
5.80: RNCC: 3 | RNVC: 2
99-250-45-019-2: RNCC: 5 | RNVC: 2
GESM827520: RNCC: 5 | RNVC: 2
3272670240179: RNCC: 5 | RNVC: 2
5-80: RNCC: 5 | RNVC: 2
5-80D: RNCC: 5 | RNVC: 9

1 Jan 1966

5120-14-440-1968
Torque Wrench

144401968
NO PRIMARY REF14-440-1968: RNCC: 3 | RNVC: 2
R.305: RNCC: 5 | RNVC: 2
R305: RNCC: 5 | RNVC: 2
R305A: RNCC: 5 | RNVC: 2
18509465-8: RNCC: 5 | RNVC: 2
0512310: RNCC: 5 | RNVC: 2

11 Jul 1990

5120-14-303-6309
Box Wrench

143036309
0D2-20: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-408-9913
Torque Wrench

144089913
NO PRIMARY REF14-408-9913: RNCC: 3 | RNVC: 2
0512250: RNCC: 5 | RNVC: 2
R.250: RNCC: 5 | RNVC: 2
R250: RNCC: 5 | RNVC: 2
0240112M00: RNCC: 5 | RNVC: 2

9 Apr 1986

5120-14-552-4425
Pin Remover

145524425
S662V5601101: RNCC: 3 | RNVC: 2

3 Jan 2007

5120-14-514-5408
Torque Wrench

145145408
R.206-25: RNCC: 3 | RNVC: 2
R206-25: RNCC: 5 | RNVC: 2

26 May 1999

5120-14-232-6794
Torque Wrench

142326794
NO PRIMARY REF14-232-6794: RNCC: 3 | RNVC: 2
A107-9: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-386-3914
Torque Wrench

143863914
02640909200: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-264-1890
Torque Wrench

142641890
S108-20: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-402-6371
Torque Wrench

144026371
2470T: RNCC: 3 | RNVC: 2
101221: RNCC: 5 | RNVC: 2

19 Jul 1985

5120-14-512-3487
Torque Wrench

145123487
R.304DA: RNCC: 3 | RNVC: 2
0531205: RNCC: 5 | RNVC: 2

10 Feb 1999

5120-14-447-3455
Torque Wrench

144473455
J.302: RNCC: 3 | RNVC: 2
0503790: RNCC: 5 | RNVC: 2
J302: RNCC: 5 | RNVC: 2
91714858: RNCC: 5 | RNVC: 2
91777851: RNCC: 5 | RNVC: 2

15 May 1991

5120-14-550-6253
Torque Wrench

145506253
6940173: RNCC: 3 | RNVC: 2

3 Jul 2006

5120-14-427-0742
Torque Wrench

144270742
R.203A: RNCC: 3 | RNVC: 2
101575: RNCC: 5 | RNVC: 2
R203A: RNCC: 5 | RNVC: 2
0193869Q00: RNCC: 5 | RNVC: 2
RAQ0288: RNCC: 5 | RNVC: 2
R 203A: RNCC: 5 | RNVC: 2
3148515121555: RNCC: 5 | RNVC: 2
0512155: RNCC: 5 | RNVC: 9

6 Oct 1988

5120-14-321-8456
Torque Wrench

143218456
M2-058: RNCC: 3 | RNVC: 2
M2-058: RNCC: 5 | RNVC: 2
85-101-0499: RNCC: 6 | RNVC: 9

1 Jan 1975

5120-14-549-9408
Torque Wrench

145499408
S.248-200D: RNCC: 3 | RNVC: 2

18 May 2006

5120-14-367-8782
Torque Wrench

143678782
R282318000: RNCC: 3 | RNVC: 2
R282318: RNCC: 5 | RNVC: 2
272.369 549: RNCC: 5 | RNVC: 2

19 Jan 1981

5120-14-490-2341
Torque Wrench

144902341
S.315DA: RNCC: 3 | RNVC: 2
3148510588148: RNCC: 5 | RNVC: 2
S-315DA: RNCC: 5 | RNVC: 2
S315DA: RNCC: 5 | RNVC: 2
MUP6117: RNCC: 5 | RNVC: 2
F300 0T 025 1075: RNCC: 6 | RNVC: 9

24 Sep 1997

5120-14-456-8943
Torque Wrench

144568943
1039942T00: RNCC: 3 | RNVC: 2

29 Jul 1992

5120-14-405-4521
Torque Wrench

144054521
50-170D: RNCC: 3 | RNVC: 2
85-692-9479: RNCC: 6 | RNVC: 9

27 Nov 1985

5120-14-401-6823
Torque Wrench

144016823
29577590: RNCC: 3 | RNVC: 2

13 Jun 1985

5120-14-300-4410
Torque Wrench

143004410
NO PRIMARY REF14-300-4410: RNCC: 3 | RNVC: 2
A204AM: RNCC: 5 | RNVC: 2
0500150: RNCC: 5 | RNVC: 2
A.204AM: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-374-0873
Torque Wrench

143740873
MHD103-43: RNCC: 3 | RNVC: 2

8 Dec 1981

5120-14-552-5820
Torque Wrench

145525820
SP.8006: RNCC: 3 | RNVC: 2

17 Jan 2007

5120-14-501-3266
Torque Wrench

145013266
73015-5-50NM: RNCC: 3 | RNVC: 2

29 Oct 1997

5120-14-420-8713
Torque Wrench

144208713
16965906: RNCC: 3 | RNVC: 2
16965906: RNCC: 5 | RNVC: 9

22 Dec 1987

5120-14-438-9846
Torque Wrench

144389846
NO PRIMARY REF14-438-9846: RNCC: 3 | RNVC: 2
0514895: RNCC: 5 | RNVC: 2
S.302: RNCC: 5 | RNVC: 2
S302: RNCC: 5 | RNVC: 2

11 Apr 1990

5120-14-511-8306
Torque Wrench

145118306
M.200B: RNCC: 3 | RNVC: 2
M.200A: RNCC: 3 | RNVC: 2
M200A: RNCC: 5 | RNVC: 2
M200B: RNCC: 5 | RNVC: 2
3148515082108: RNCC: 5 | RNVC: 2
3148515082115: RNCC: 5 | RNVC: 2
0508210: RNCC: 5 | RNVC: 9
0508211: RNCC: 5 | RNVC: 9

26 Jan 1999

5120-14-543-1570
Torque Wrench

145431570
61383698: RNCC: 3 | RNVC: 2

26 Aug 2004

5120-14-546-9860
Torque Wrench

145469860
O110873: RNCC: 3 | RNVC: 2
O110873: RNCC: 5 | RNVC: 2

12 Sep 2005

5120-14-382-8201
Torque Wrench

143828201
TECP12FU: RNCC: 3 | RNVC: 2
TECP12FU: RNCC: 5 | RNVC: 2
85-691-9357: RNCC: 6 | RNVC: 9

17 Feb 1983

5120-14-431-5259
Torque Wrench

144315259
0MT21CGM4-566/R6/TT500SD: RNCC: 3 | RNVC: 2

21 Apr 1989

5120-14-420-8684
Torque Wrench

144208684
96162603: RNCC: 3 | RNVC: 2
96162603: RNCC: 5 | RNVC: 9

22 Dec 1987

5120-14-512-4426
Torque Wrench

145124426
MC25R: RNCC: 3 | RNVC: 2
3272670223288: RNCC: 5 | RNVC: 2

16 Feb 1999

5120-14-449-6241
Torque Wrench

144496241
0515130: RNCC: 3 | RNVC: 2
S.316-2: RNCC: 5 | RNVC: 2
S316-2: RNCC: 5 | RNVC: 2

28 Aug 1991

5120-14-031-9309
Torque Wrench

140319309
3160S93-11-560: RNCC: 3 | RNVC: 2

5 Jul 1980

5120-14-473-6969
Torque Wrench

144736969
29583250: RNCC: 3 | RNVC: 2

9 Jan 1995

5120-14-480-9364
Torque Wrench

144809364
A.303A: RNCC: 3 | RNVC: 2
A.303A: RNCC: 5 | RNVC: 2
0001264: RNCC: 5 | RNVC: 2
3148510012643: RNCC: 5 | RNVC: 2
0189177R00: RNCC: 5 | RNVC: 2
91774059: RNCC: 5 | RNVC: 2
0012543: RNCC: 5 | RNVC: 9

11 Apr 1996

5120-14-222-7486
Box Wrench

142227486
30-1-2X9-16: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-332-4428
Lamp Extractor

143324428
0853.0621: RNCC: 3 | RNVC: 2
0853.0621: RNCC: 3 | RNVC: 2
02-906: RNCC: 3 | RNVC: 2
02-906: RNCC: 5 | RNVC: 2
91528378: RNCC: 5 | RNVC: 2
99021528: RNCC: 5 | RNVC: 2
02-906: RNCC: 5 | RNVC: 9
853-0621: RNCC: 5 | RNVC: 9
0853.0621: RNCC: 5 | RNVC: 9
85-693-4485: RNCC: 6 | RNVC: 9

2 Jul 1975

5120-14-527-8245
Seal Inserter

145278245
888-518-700-1: RNCC: 3 | RNVC: 2

21 Nov 2001

5120-14-244-8204
Hand Hammer

142448204
NO PRIMARY REF14-244-8204: RNCC: 3 | RNVC: 2
208-32BB: RNCC: 5 | RNVC: 2
601-3: RNCC: 5 | RNVC: 2
91396448: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-238-5444
Bench And Pipe Vise

142385444
78C: RNCC: 3 | RNVC: 2
1235: RNCC: 5 | RNVC: 9
SAM78C: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-031-6839
Box Wrench

140316839
TMY20-32-321: RNCC: 3 | RNVC: 2

14 Jun 1980

5120-14-425-9439
Aligning Punch

144259439
TH20C2-1-3A6: RNCC: 3 | RNVC: 2

28 Jul 1988

5120-14-302-4845
Mechanical Puller

143024845
3130S95-66-005: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-246-2973
Mechanical Puller

142462973
U.35: RNCC: 3 | RNVC: 2
3148510683003: RNCC: 5 | RNVC: 2
U35: RNCC: 5 | RNVC: 2
0001075600: RNCC: 5 | RNVC: 2
M0T49: RNCC: 5 | RNVC: 2
300-6247: RNCC: 5 | RNVC: 2
0068300: RNCC: 5 | RNVC: 9
FACOMU.35: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-402-6373
Mechanical Puller

144026373
8-0134L: RNCC: 3 | RNVC: 2
100757: RNCC: 5 | RNVC: 2

19 Jul 1985

5120-14-379-2434
Socket Wrench

143792434
RT8206B: RNCC: 3 | RNVC: 2
85-691-9760: RNCC: 6 | RNVC: 9

6 Sep 1982

5120-14-380-0327
Ratchet Wrench

143800327
12549655: RNCC: 3 | RNVC: 2

8 Nov 1982

5120-14-540-8523
Hand Hammer

145408523
0407000501: RNCC: 3 | RNVC: 2
3303800407022: RNCC: 5 | RNVC: 2

23 Apr 2004

5120-14-278-3030
Lamp Extractor

142783030
713710003: RNCC: 3 | RNVC: 2
713710003: RNCC: 5 | RNVC: 2
CMA2: RNCC: 5 | RNVC: 2
CMA2: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-432-7095
Seal Inserter

144327095
OUT50166: RNCC: 3 | RNVC: 2
0UT50166: RNCC: 5 | RNVC: 2

21 Jun 1989

5120-14-527-7167
Seal Inserter

145277167
888-492-900-1: RNCC: 3 | RNVC: 2

14 Nov 2001

5120-14-533-2183
Socket Wrench

145332183
223E612-00: RNCC: 3 | RNVC: 2
223E612-00: RNCC: 5 | RNVC: 9

29 Jan 2003

5120-14-414-5650
Socket Wrench

144145650
75-34: RNCC: 3 | RNVC: 2

11 Feb 1987

5120-14-422-2292
Socket Wrench

144222292
0372-42-10135: RNCC: 3 | RNVC: 2

24 Feb 1988

5120-14-314-6087
Socket Wrench

143146087
97-16: RNCC: 3 | RNVC: 2
3272670280533: RNCC: 5 | RNVC: 2

1 Jan 1974

5120-14-539-0546
Socket Wrench

145390546
NGM0060000042174: RNCC: 2 | RNVC: 2

9 Dec 2003

5120-14-386-9740
Mechanical Puller

143869740
26545910400: RNCC: 3 | RNVC: 2
265459104: RNCC: 5 | RNVC: 9

24 Aug 1983

5120-14-416-4799
Tack Claw

144164799
1946: RNCC: 3 | RNVC: 2
413: RNCC: 5 | RNVC: 2

10 Jun 1987

5120-14-486-2840
Mechanical Puller

144862840
H117172: RNCC: 3 | RNVC: 2

10 Mar 1997

5120-14-284-5089
Box Wrench

142845089
T0120BBF5APL7REP6A: RNCC: 3 | RNVC: 2
301704TREP6A: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-236-4039
Mechanical Puller

142364039
U50: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-457-9983
Bushing Driver Set

144579983
SANS: RNCC: 3 | RNVC: 2

2 Oct 1992

5120-14-339-0133
Pipe Vise

143390133
2002000: RNCC: 3 | RNVC: 2

17 Dec 1976

5120-14-043-1505
Hand Screw Jack

140431505
065U20-719868T: RNCC: 3 | RNVC: 2

10 Apr 1984

5120-14-546-3084
Ratchet Wrench

145463084
14100000697: RNCC: 3 | RNVC: 2

23 Jun 2005

5120-14-422-9117
Ratchet Wrench

144229117
ZF05940927: RNCC: 3 | RNVC: 2
5940927: RNCC: 5 | RNVC: 2
ZF05940927: RNCC: 5 | RNVC: 2

24 Mar 1988

5120-14-202-1921
Saddler's Awl Haft

142021921
100-4: RNCC: 3 | RNVC: 2

1 Jan 1963

5120-14-032-0955
Seal Inserter

140320955
341A93-3121-20: RNCC: 3 | RNVC: 2

5 Jul 1980

5120-14-032-0958
Seal Inserter

140320958
341A93-3225-01: RNCC: 3 | RNVC: 2

5 Jul 1980

5120-14-300-9641
Mechanical Puller

143009641
341A93-3413-00: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-438-3504
Piston Inserter

144383504
330A98-7527-00: RNCC: 3 | RNVC: 2

14 Mar 1990

5120-14-285-4861
Wood Mallet

142854861
NO PRIMARY REF14-285-4861: RNCC: 3 | RNVC: 2
C0P41M834: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-300-0754
Box Wrench

143000754
LFP54-67-617: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-031-9666
Mechanical Puller

140319666
NO PRIMARY REF14-031-9666: RNCC: 3 | RNVC: 2
BL53767: RNCC: 5 | RNVC: 9

5 Jul 1980

5120-14-301-1450
Mechanical Puller

143011450
8810600160: RNCC: 3 | RNVC: 2
A26-79: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-264-5972
Box Wrench

142645972
NO PRIMARY REF14-264-5972: RNCC: 3 | RNVC: 2
107989-24MLB: RNCC: 5 | RNVC: 9

1 Jan 1970

5120-14-369-7948
Box Wrench

143697948
30AM013-0000014: RNCC: 3 | RNVC: 2

17 Apr 1981

5120-14-510-9846
Hand Hammer

145109846
2082803: RNCC: 3 | RNVC: 2

25 Nov 1998

5120-14-357-9946
Open End Box Wrench

143579946
MHD234-22: RNCC: 3 | RNVC: 2
MHD234-22: RNCC: 5 | RNVC: 2

20 Jul 1979

5120-14-204-0956
Aligning Punch

142040956
3130S95-13-045: RNCC: 3 | RNVC: 2

1 Jan 1963

5120-14-375-2526
Mechanical Puller

143752526
73-115-005: RNCC: 3 | RNVC: 2

26 Feb 1982

5120-14-274-8504
Socket Wrench

142748504
3107220: RNCC: 3 | RNVC: 2
0117220: RNCC: 3 | RNVC: 2
80-20: RNCC: 3 | RNVC: 2
122-20: RNCC: 3 | RNVC: 9
72-20: RNCC: 5 | RNVC: 2
72.20: RNCC: 5 | RNVC: 2
VIR3107220: RNCC: 5 | RNVC: 9
DEM122-20: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-434-9803
Seal Inserter

144349803
853-290-054-0: RNCC: 3 | RNVC: 2

11 Oct 1989

5120-14-363-2198
Mechanical Puller

143632198
3160S95-63-020-1: RNCC: 3 | RNVC: 2
85-689-8106: RNCC: 6 | RNVC: 9

3 Apr 1980

5120-14-372-6574
Ratchet Wrench

143726574
123-C: RNCC: 3 | RNVC: 2
123C: RNCC: 3 | RNVC: 2
123-C: RNCC: 5 | RNVC: 9

21 Sep 1981

5120-14-313-2979
Hand Screw Jack

143132979
49CSTIGEDIAM8: RNCC: 3 | RNVC: 2
XM202: RNCC: 5 | RNVC: 2
85-686-0095: RNCC: 6 | RNVC: 9

1 Jan 1974

5120-14-489-8891
Hand Hydraulic Jack

144898891
1050-1K: RNCC: 3 | RNVC: 9
CK5: RNCC: 5 | RNVC: 9
RAS1050-1K: RNCC: 5 | RNVC: 9

27 Aug 1997

5120-14-297-0547
Mechanical Puller

142970547
007-23-02M1: RNCC: 3 | RNVC: 2
A26-52: RNCC: 5 | RNVC: 2
007-23-02-M1: RNCC: 5 | RNVC: 2
TMY20-49-304: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-369-7938
Box Wrench

143697938
30AM013-0000007: RNCC: 3 | RNVC: 2

17 Apr 1981

5120-14-555-3252
Catch Lever Tool

145553252
511336: RNCC: 3 | RNVC: 2

25 Oct 2007

5120-14-313-2961
Box Wrench

143132961
589212: RNCC: 3 | RNVC: 9

1 Jan 1974

5120-14-403-8495
Socket Wrench

144038495
NO PRIMARY REF14-403-8495: RNCC: 3 | RNVC: 2
HTLT407672: RNCC: 5 | RNVC: 9
YTR320-1130: RNCC: 5 | RNVC: 9

28 Aug 1985

5120-14-352-4404
Pawl

143524404
9970-115-702: RNCC: 3 | RNVC: 2
9970-115-702-0: RNCC: 5 | RNVC: 2
85-689-8048: RNCC: 6 | RNVC: 9

16 Oct 1978

5120-14-224-8711
Ratchet Wrench

142248711
NO PRIMARY REF14-224-8711: RNCC: 3 | RNVC: 2
1035-38: RNCC: 5 | RNVC: 9

1 Jan 1966

5120-14-437-4285
Piston Inserter

144374285
16380764: RNCC: 3 | RNVC: 2
16380764: RNCC: 5 | RNVC: 9

31 Jan 1990

5120-14-425-9590
Aligning Punch

144259590
502762BTH20R2: RNCC: 3 | RNVC: 2

28 Jul 1988

5120-14-461-0121
Hand Hammer

144610121
1263A.400: RNCC: 3 | RNVC: 2
1263.400: RNCC: 3 | RNVC: 9
0225950: RNCC: 5 | RNVC: 2
1263-400: RNCC: 5 | RNVC: 2
99147246: RNCC: 5 | RNVC: 2

17 Feb 1993

5120-14-422-0196
Open End Box Wrench

144220196
42.17X19: RNCC: 3 | RNVC: 2
130357: RNCC: 3 | RNVC: 2
91355344: RNCC: 5 | RNVC: 2
91634459: RNCC: 5 | RNVC: 2
42.17X19: RNCC: 5 | RNVC: 2
3148511016800: RNCC: 5 | RNVC: 2
250-4548: RNCC: 5 | RNVC: 2
0714 231 719: RNCC: 5 | RNVC: 2
0101680: RNCC: 5 | RNVC: 9
FACOM42.17X19: RNCC: 5 | RNVC: 9

17 Feb 1988

5120-14-369-7941
Box Wrench

143697941
30AM013-0000004: RNCC: 3 | RNVC: 2

17 Apr 1981

5120-14-376-6288
Plastic Mallet

143766288
207A50BB: RNCC: 3 | RNVC: 2
3148511474242: RNCC: 5 | RNVC: 2
207-50BB: RNCC: 5 | RNVC: 9
85-693-8073: RNCC: 6 | RNVC: 9

28 Apr 1982

5120-14-262-4791
Drive Pin Punch

142624791
3210-97-31-023: RNCC: 3 | RNVC: 2
08-384: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-432-7320
Seal Inserter

144327320
NO PRIMARY REF14-432-7320: RNCC: 3 | RNVC: 2
0U139367: RNCC: 5 | RNVC: 9
OU139367: RNCC: 5 | RNVC: 9

21 Jun 1989

5120-14-554-0812
Hand Hammer

145540812
868D.40BOC: RNCC: 3 | RNVC: 2
3148516932570: RNCC: 5 | RNVC: 2
693257: RNCC: 5 | RNVC: 2

8 Jun 2007

5120-14-551-3278
Mechanical Puller

145513278
S632V3001102: RNCC: 3 | RNVC: 2

12 Sep 2006

5120-14-257-2919
Mechanical Puller

142572919
FH152-932: RNCC: 3 | RNVC: 2
FH152-932: RNCC: 5 | RNVC: 9

1 Jan 1969

5120-14-285-6246
Mechanical Puller

142856246
NO PRIMARY REF14-285-6246: RNCC: 3 | RNVC: 2
6457459: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-369-7949
Box Wrench

143697949
30AM013-0000015: RNCC: 3 | RNVC: 2

17 Apr 1981

5120-14-244-9017
Box Wrench

142449017
50.88: RNCC: 3 | RNVC: 2
108-88: RNCC: 3 | RNVC: 2
119-88: RNCC: 3 | RNVC: 9
3148511071403: RNCC: 5 | RNVC: 2
50-88: RNCC: 5 | RNVC: 2
3272670239999: RNCC: 5 | RNVC: 2
0107140: RNCC: 5 | RNVC: 9
DEM119-88: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-400-6416
Hand Hammer

144006416
220-16X18ENX: RNCC: 3 | RNVC: 2

8 May 1985

5120-14-300-9729
Mechanical Puller

143009729
341A93-3515-00: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-407-2775
Mechanical Puller

144072775
355A93-3251-00: RNCC: 3 | RNVC: 2

12 Feb 1986

5120-14-319-7269
Mechanical Puller

143197269
NO PRIMARY REF14-319-7269: RNCC: 3 | RNVC: 2
42-903-04-051: RNCC: 5 | RNVC: 9

23 Aug 2000

5120-14-403-8944
Hand Hammer

144038944
859-28: RNCC: 3 | RNVC: 2

11 Sep 1985

5120-14-393-5635
Box Wrench

143935635
55-3-4X7-8: RNCC: 3 | RNVC: 2
55-3/4X7/8: RNCC: 5 | RNVC: 2

7 Apr 1984

5120-14-237-4735
Drill Drift

142374735
3130S98-05-010: RNCC: 3 | RNVC: 2

1 Jan 1967

Load More Results