What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.

A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Blacksmith's Punch?

A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Mechanical Finger?

A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.

A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Screwdriver And Wrench Assembly?

A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Stakeholder Bench Plate?

A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.

What is a Drill Drift?

A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.

A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Digging Bar?

A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

What is a Valve Spring Lifter?

A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.

What is a Fuse Puller?

A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.

Hand Tools, Nonedged, Nonpowered - France (FR)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by France (FR) - NCB is 14

Page 59 of 110

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by France

51	20	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - France (FR)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 16 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Pipe Vise? 19 Items: A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.
What is a Hand Vise? 25 Items: A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.
What is a Hand Hydraulic Jack? 133 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 153 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 903 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 17 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
Swage,Bottom,Blacksmith's 10 Items
What is a Hand Tube Flaring Tool? 23 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Blacksmith's Punch? 12 Items: A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.
What is a Drain Plug Wrench? 45 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 57 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 16 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 3829 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
Flatter,Blacksmith's 18 Items
Swage,Top,Blacksmith's 12 Items
What is a Pipe Wrench? 110 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 149 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 53 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
Screwdriver,Offset 54 Items
What is a Screwdriver Bit? 707 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Mechanical Finger? 25 Items: A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.
What is a Socket Wrench Socket? 1803 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 1412 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 1641 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 52 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 565 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
Jack,Push-Pull,Screw 30 Items
What is a Hand Tube Bender? 54 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 1106 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 55 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pinch Bar? 19 Items: A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.
What is a Pry Bar? 17 Items: A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.
What is a Wrecking Bar? 15 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 273 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 413 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 32 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 295 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
Face,Hammer,Inserted 25 Items
What is a Hole Sheet Metal Holder? 37 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Screwdriver And Wrench Assembly? 11 Items: A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.
What is a Hand Rivet Set? 121 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Stakeholder Bench Plate? 22 Items: A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.
What is a Drill Drift? 32 Items: A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.
What is a Tack Claw? 15 Items: A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.
Mattock 28 Items
What is a Socket Wrench Handle Bar? 108 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Stake,Sheet Metalworking 50 Items
Riveter,Blind,Hand 76 Items
What is a Hand Shovel? 43 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 98 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 30 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
What is a Digging Bar? 20 Items: A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.
Block,Dolly,Sheet Metalworking 56 Items
What is a Piston Ring Compressor? 34 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Valve Spring Lifter? 29 Items: A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.
What is a Fuse Puller? 20 Items: A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.
What is a Hand Lead Seal Press? 18 Items: A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.
What is a Hand Beading Tool? 91 Items: A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.
What is a Hand Hammer? 502 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
Head,Hand Hammer 81 Items
What is a Lamp Extractor? 76 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Tube Packing Ring Installing Tool? 29 Items: A Tube Packing Ring Installing Tool (INSTALLING TOOL,TUBE PACKING RING) is an item designed to insert packing rings on tubes within tube sheets on condensers and similar heat exchangers. In operation, the packing rings are assembled on the loading pin mandrel and are then transferred from the mandrel on to the tube by means of a tubular sleeve which slides on the mandrel.
What is a Carpenters' Pincers? 18 Items: A Carpenters' Pincers (PINCERS,CARPENTERS') is a plierlike hand tool having two opposing jaws which may have hammerlike backs. One handle has a nail or tack pulling claw, the other is shaped to form a screwdriver. The tool may contain a wire cutter. See also NIPPERS, END CUTTING and PINCERS, FARRIERS'.
What is a Trowel? 33 Items: A Trowel is a tool used for bricklaying, concrete work, plastering, linoleum laying, and masonry work. Excludes CORNER TOOL, CONCRETE.
What is a Hand Abrasive Wheel Dresser? 12 Items: A Hand Abrasive Wheel Dresser (DRESSER,ABRASIVE WHEEL,HAND) is a tool designed to remove glaze from, dress, shape, sharpen, and true solid abrasive wheels. Excludes NIB, DIAMOND, WHEEL DRESSING.
What is a Lamp Cap Extractor? 32 Items: A Lamp Cap Extractor (EXTRACTOR,LAMP CAP) is a tool specifically designed to facilitate the removal of lamp caps from switchboards, panels or indicator lamps.
What is a Rivet Bucking Bar? 51 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 86 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 277 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Woven Cable Grip? 23 Items: A Woven Cable Grip (GRIP,CABLE,WOVEN) is a braided wire device designed to clutch a bare or insulated conductor, cable or wire rope, for holding taut or drawing through conduit.
What is a Screw Thread Insert Extractor? 19 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is an Electron Tube Extractor? 18 Items: An Electron Tube Extractor (EXTRACTOR,ELECTRON TUBE) is a hand tool designed to facilitate the removal of electron tubes from electronic equipment and to avoid burning the fingers. It may be used for installing tubes.
What is a Cross Tip Screwdriver? 362 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 21 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 11 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 37 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Tool Handle Wedge? 10 Items: A Tool Handle Wedge (WEDGE,TOOL HANDLE) is excludes WEDGE, WOOD.
What is a Marlinespike? 16 Items: A Marlinespike is a metal hand tool made in the shape of a tapered pin. One end is pointed and the opposite end may be headed. The body may contain an eye for a lanyard sling, or be grooved lengthwise. Excludes CABLE PICK and FID.
What is an Aligning Punch? 272 Items: An Aligning Punch (PUNCH,ALIGNING) is a round, square, hexagonal or octagonal bodied hand tool, having a round tapered section 6-1/2 inches (165.1 mm) or more in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, DRIFT and DRIFTPIN.
What is a Drift Punch? 25 Items: A Drift Punch (PUNCH,DRIFT) is a round, square, hexagonal, or octagonal bodied hand tool, having a round tapered section 4 to 6 inches (101.6 mm to 152.4 mm) inclusive in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, ALIGNING; and DRIFTPIN.
What is a Putty Knife? 36 Items: A Putty Knife (KNIFE,PUTTY) is a hand tool with a nonedged blade fixed to a handle for laying on and smoothing putty and the like.
What is a Socket Wrench Adapter-Extension? 40 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 30 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 184 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Socket Wrench Ratchet Attachment? 47 Items: A Socket Wrench Ratchet Attachment (RATCHET ATTACHMENT,SOCKET WRENCH) is a connection for socket wrenches and handles. Consists of a ratcheting mechanism with an internal drive on one end and an external drive on the opposite end of the same size. The item is designed to permit continuous rotation of the socket in one direction without removing the socket or handle and without a complete rotation of the handle.
What is a Wrench Extension Handle? 81 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Socket Wrench Crowfoot Attachment? 155 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 33 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 43 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 48 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 2394 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 372 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 300 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 661 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 32 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand-Operated Grommet And Eyelet Press? 12 Items: A Hand-Operated Grommet And Eyelet Press (PRESS,GROMMET AND EYELET,HAND-OPERATED) is a device which punches or pierces holes and in addition fastens or sets eyelets and grommets in cloth, paper and similar material. May be used for fastening or setting rivets, lacing hooks and snaps in cloth, paper and similar material. It is hand operated by lever or screw action. See also PUNCH, EYELET, PLIER TYPE and PRESS, GROMMET AND EYELET, FOOT OPERATED.
What is a Claw Bar? 19 Items: A Claw Bar (BAR,CLAW) is before using, refer to Reference Drawing Group AG.
What is a Shock Type Wheel Stud Nut Wrench? 11 Items: A Shock Type Wheel Stud Nut Wrench (WRENCH,WHEEL STUD NUT,SHOCK TYPE) is a manually operated item designed to remove wheel stud nuts. In operation the inner nut is turned by a socket attached to a shaft on which is a loose swinging weighted handle. The weighted handle may be swung quickly to provide an impact force against the socket to loosen the seized or jammed nuts. The outer nut is held stationary by a separate hexagonal holding wrench.
What is a Drift Pin Set? 30 Items: A Drift Pin Set is a group of DRIFTPIN having different characteristics.
What is a Tire Iron? 25 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 115 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Blacksmith's Vise? 14 Items: A Blacksmith's Vise (VISE,BLACKSMITH'S) is a clamping device consisting of a mounting plate, one stationary and one manual screw actuated jaw and a supporting member extending downward from the stationary jaw to the floor. Designed to be mounted on a bench, table or the like. May include pipe holding jaws.
What is a Machinist's Vise? 64 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Clamp Base Bench Vise? 10 Items: A Clamp Base Bench Vise (VISE,BENCH,CLAMP BASE) is a clamping device consisting of a base, one stationary and one manual screw actuated jaw, and one or more guide bars or rods. Designed with an integral clamp for attaching to a bench, table, or the like. Does not include pipe holding jaws.
What is a Fixed Open End Wrench Set? 86 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Nail Set? 11 Items: A Nail Set is a round knurled, square, hexagonal or octagonal bodied hand tool having a round tapered section terminating in a cupped point. It is designed to set brad head nails below the surface by striking it a hammerlike blow. See also PUNCH, DRIVE PIN.
What is a Socket Wrench Set? 202 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is an Open End Box Wrench Set? 10 Items: An Open End Box Wrench Set (WRENCH SET,OPEN END BOX) is a group of WRENCH, OPEN END BOX having different characteristics.
What is a Combination Box And Open End Wrench Set? 72 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Box Wrench Set? 36 Items: A Box Wrench Set (WRENCH SET,BOX) is a group of box wrenches having different characteristics. It may include a HANDLE, EXTENSION WRENCH. See also WRENCH SET, COMBINATION, BOX AND OPEN END.
What is a Hot Line Stick? 26 Items: A Hot Line Stick is a hand tool consisting of a straight, round stick (pole) made of a suitable nonconductive material with a tool fixed to one end. The other end may be plain or have a butt mounting device fixed to it. Various types of attachments (hooks, rings, and bands) may be fixed to the body. It is designed for use in the repair and maintenance of live high voltage aerial lines. Excludes hot line sticks without heads.
Handle,Mattock-Pick 15 Items
What is a Wrench Kit? 73 Items: A Wrench Kit is an assortment of various types and sizes of wrenches such as SOCKET, SOCKET WRENCH; WRENCH, OPEN END, FIXED; WRENCH, BOX and the like. It may include adapter(s), ratchet(s) and the like. See also WRENCH SET (as modified.
What is a Brad Awl? 15 Items: A Brad Awl (AWL,BRAD) is a small, pointed tool used by shoemakers, saddlers, cabinetmakers, and the like for piercing small holes in wood, leather, and similar materials, and consists of a handle with a ferrule and a blade. The blade is round, terminating in a beveled, sharp straight edge and has a shank which passes through the center of the handle.
What is a Scratch Awl? 20 Items: A Scratch Awl (AWL,SCRATCH) is an item whose nominal length of blade is less than 4 inches (101.6 millimeters) and is provided with a nondetachable handle.
What is a Screw Extractor Set? 10 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 102 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
Jack,Scissors,Hand 26 Items
What is a Piston Ring Expander? 23 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
Mallet,Plastic 62 Items
Mallet,Rubber 10 Items
What is a Wood Mallet? 37 Items: A Wood Mallet (MALLET,WOOD) is excludes MALLET, CALKING; MALLET, HAWSING and MALLET, SERVING.
What is a Rack Bar Jack? 30 Items: A Rack Bar Jack (JACK,RACK BAR) is excludes JACK, BUMPER and JACK, REEL, HAND.
What is a Pneumatic Tire Valve Core Inserter And Remover? 14 Items: A Pneumatic Tire Valve Core Inserter And Remover (INSERTER AND REMOVER,PNEUMATIC TIRE VALVE CORE) is a bar of steel having a small cylindrical slotted end for removing or installing a valve core in a valve stem by a screwing motion. See also REPAIR TOOL, PNEUMATIC TIRE VALVE.
What is a Hand Tube Swaging Tool Kit? 20 Items: A Hand Tube Swaging Tool Kit (SWAGING TOOL KIT,TUBE,HAND) is a hand-operated noncutting tool consisting of one or more PUNCH, TUBE SWAGING, HAND and a tube flaring bar.
What is a Hand Tube Flaring Punch? 11 Items: A Hand Tube Flaring Punch (PUNCH,TUBE FLARING,HAND) is a noncutting tool having a shaped end or section designed to flare the ends of tubes. One type is designed to flare the ends of tubes against a tube sheet, and another to flare tube ends to mate with tube fittings. Includes punch components of FLARING TOOL, TUBE, HAND.
What is a Hose Strap Band Clamping Tool? 26 Items: A Hose Strap Band Clamping Tool (CLAMPING TOOL,STRAP BAND,HOSE) is an item designed to tension and lock metal straps around a rubber hose, and the like. It is also used to clamp and hold fittings therein.
What is a Mechanical Puller? 3073 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 470 Items
What is a Slip Joint Pliers? 84 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Brake Repair Pliers? 14 Items: A Brake Repair Pliers (PLIERS,BRAKE REPAIR) is a tool having jaws designed for use in brake repair operations, such as removing and replacing items such as keys, springs, and the like. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 226 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 12 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 81 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 56 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 15 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 11 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 29 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Cross Tip Screwdriver Set? 14 Items: A Cross Tip Screwdriver Set (SCREWDRIVER SET,CROSS TIP) is a group of SCREWDRIVER, CROSS TIP having different characteristics.
What is a Spanner Wrench Set? 18 Items: A Spanner Wrench Set (WRENCH SET,SPANNER) is a group of items under WRENCH, SPANNER having different characteristics.
What is a Drive Pin Punch Set? 31 Items: A Drive Pin Punch Set (PUNCH SET,DRIVE PIN) is a group of PUNCH, DRIVE PIN having different characteristics.
What is an Aligning Punch Set? 13 Items: An Aligning Punch Set (PUNCH SET,ALIGNING) is a group of PUNCH, ALIGNING having different characteristics. See also DRIFTPIN SET.
What is a Slugging Type Box Wrench Socket? 16 Items: A Slugging Type Box Wrench Socket (SOCKET,SLUGGING TYPE BOX WRENCH) is an item having a hexagonal external drive at one end, made to fit into the internal hexagonal or 12-point opening of a slugging type box wrench. The opposite end has a single-broached hexagonal opening of the same size as the external drive. The item is designed with extra thick walls to withstand the impact of sledge blows on the driving wrench.
What is a Mechanical Puller Step Plate? 44 Items: A Mechanical Puller Step Plate (STEP PLATE,MECHANICAL PULLER) is a circular disk, flanged to provide a shoulder, and designed to provide a base for the screw point of a PULLER, MECHANICAL when pulling externally mounted bearings, gears, and the like from hollow shafts or housings. It has a concentric, countersunk hole to accommodate the puller screw point.
What is a Solid Center Punch? 79 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Cable Type Ratchet Lever Puller? 20 Items: A Cable Type Ratchet Lever Puller (PULLER,RATCHET LEVER,CABLE TYPE) is an item consisting of a metal frame and ratchet lever reel to which is attached one end of a flexible cable (wire rope). The cable feeds through the fast eye in the metal frame, and may be reeved through a slip hook tackle hook. See also BINDER, LOAD; HOIST, WIRE ROPE and STRETCHER, WIRE.
What is an Electronic Equipment Tuning Wand? 18 Items: An Electronic Equipment Tuning Wand (TUNING WAND,ELECTRONIC EQUIPMENT) is a hand-held rod used in determining the adjustment of the windings of a radio frequency coil. It is made of insulating material with iron on one end and brass on the other end. By inserting the iron end in the coil, the inductance is increased and by inserting the brass end, the inductance is decreased.
What is a Combination Open End And Spanner Wrench? 14 Items: A Combination Open End And Spanner Wrench (WRENCH,OPEN END AND SPANNER,COMBINATION) is a tool having open end wrench characteristics at one end and spanner wrench features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s) at the other end.
What is a Detent Handling Tool? 187 Items: A Detent Handling Tool (HANDLING TOOL,DETENT) is a specially designed handling tool consisting of a rigid bar with a T-handle on one end. The other end is equipped with threads designed to mate the threads of a detent to facilitate inserting or extracting.
What is a Hand Material Handling Hook? 23 Items: A Hand Material Handling Hook (HOOK,MATERIAL HANDLING,HAND) is a hook whose curved end conforms to Style AP1, AP2, AP3 or AP4 of Reference Drawing Group AP. Excludes HOOK, MANHOLE COVER, HAND; HOOK, WIRE BREAKING, HAND; HOOK, ROCK CRUSHER FEEDING, HAND; HOOK, STRAINER REMOVING, HAND and HOOKS, BAG HANDLING, HAND.
What is a Magnetic Retrieving Tool? 11 Items: A Magnetic Retrieving Tool (RETRIEVING TOOL,MAGNETIC) is a hand-operated magnetic device used to locate and pick up metallic articles, such as bolts, nuts, pins, washers, and the like, in confined spaces. It may be rigid, flexible or adjustable. Excludes FINGER, MECHANICAL.
What is a Mechanical Puller Adapter? 78 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Combination Box And Open End Box Wrench? 13 Items: A Combination Box And Open End Box Wrench (WRENCH,BOX AND OPEN END BOX,COMBINATION) is a double end wrench, box and open end box, primarily designed for removing or replacing tube fittings. The opening in the open end box may be machined at an angle from the longitudinal center line of the wrench.
What is a Screw Thread Insert Inserter? 136 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Flat Tip Screwdriver Set? 48 Items: A Flat Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP) is a group of SCREWDRIVER, FLAT TIP having different characteristics.
What is a Terminal Crimping Tool Contact Positioner? 89 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 16 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is an Adjustable Wrench? 138 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 239 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 75 Items
Handle,Shovel 10 Items
What is a Socket Wrench Spanner Attachment? 88 Items: A Socket Wrench Spanner Attachment (SPANNER ATTACHMENT,SOCKET WRENCH) is an item having an adjustable or fixed span with pin, hook, or key type end that is used to fit and turn various size retaining rings, cover plates, plugs, couplings, and like parts. Usually designed to be driven by a male driver.
What is a Retaining Ring Installation Tool? 44 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Tacker? 16 Items: A Tacker is a hand-operated, hammerlike or gunlike item without a clincher, used to drive preformed connecting elements like pins, nails or staples through one object or piece of material into another. Excludes STAPLER (as modified).
What is a Bearing And Bushing Inserter? 290 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 207 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 939 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 14 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 93 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 161 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 94 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 141 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 53 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Six Point Tip Screwdriver? 155 Items: A Six Point Tip Screwdriver (SCREWDRIVER,SIX POINT TIP) is a manual screwdriver having a single nonremoveable blade having a tip with six rounded points.
What is a Seal Inserter And Remover? 147 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 478 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is a Preformed Packing Inserter And Remover? 34 Items: A Preformed Packing Inserter And Remover (INSERTER AND REMOVER,PREFORMED PACKING) is a hand tool designed to install and remove a PACKING, PREFORMED.
What is a Pin Remover? 34 Items: A Pin Remover (REMOVER,PIN) is a hand tool designed to facilitate the removal of a pin from a hole.
What is a Pin Inserter And Remover? 13 Items: A Pin Inserter And Remover (INSERTER AND REMOVER,PIN) is a rodlike tool designed to facilitate the insertion and removal of a pin from a hole.
What is an Electrical Contact Inserter And Remover? 37 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Piston Inserter? 40 Items: A Piston Inserter (INSERTER,PISTON) is a tool designed to permit installation of a piston or piston assembly without damaging the packings or piston.
What is a Spring Inserter And Remover? 85 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 13 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Stud Inserter? 22 Items: A Stud Inserter (INSERTER,STUD) is a device designed to drive in studs. It does not have any facilities for removing or extracting studs. See also INSERTER AND REMOVER, STUD.
What is a Stud Inserter And Remover? 17 Items: A Stud Inserter And Remover (INSERTER AND REMOVER,STUD) is a group of items designed to extract and to drive studs. It may include collets, guides, housings, holders and the like. See also REMOVER SET, STUD and INSERTER, STUD.
What is a Gear Inserter? 54 Items: A Gear Inserter (INSERTER,GEAR) is a hand tool designed to install various gears onto a gearshaft. It may be operated by a pushing or a striking force.
What is a Crimping Tool Die? 73 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is an Electrical Connector Inserter? 45 Items: An Electrical Connector Inserter (INSERTER,ELECTRICAL CONNECTOR) is a hand tool designed to hold an electrical connector, and to assist in the positioning and installation of the connector on a cover, panel or the like.
What is a Float? 12 Items: A Float is a tool used for concrete, plastering and grouting work.
What is a Mechanical Puller Set? 19 Items: A Mechanical Puller Set (PULLER SET,MECHANICAL) is two or more separate PULLER, MECHANICAL of different fixed sizes.
What is a Lifting Pneumatic Bag? 11 Items: A Lifting Pneumatic Bag (PNEUMATIC BAG,LIFTING) is a device made of flexible material designed to lift another item by being placed under the item and being inflated with air or some other gas. It will have a means of being connected to an air or gas source and may include a connector hose, a control valve and/or a pressure regulator.
What is a Cable Tie Installation Tool? 22 Items: A Cable Tie Installation Tool (INSTALLATION TOOL,CABLE TIE) is a lightweight, hand-held, hand-operated tool designed to fasten cable ties, straps and the like. Cable tie is inserted into the nose of the tool flush to the cable tie head. Trigger handle tightens cable tie and cuts off any excess. These installation tools are available in a variety of sizes depending on their intended use with miniature, intermediate, standard, heavy or extra heavy cross section ties.
What is a Bearing Staking Installation Tool? 159 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
Wrench Set,Ratchet 15 Items
What is a Sealant Dispenser? 26 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Retaining Ring Pliers Set? 10 Items: A Retaining Ring Pliers Set (PLIERS SET,RETAINING RING) is a group of PLIERS, RETAINING RING having different characteristics.
What is a Hand Armament Subsystem Carrier? 52 Items: A Hand Armament Subsystem Carrier (CARRIER,ARMAMENT SUBSYSTEM,HAND) is a metallic item with a clamp device and/or space for depositing articles. It is used for transporting weapon parts during maintanence and/or repair work, such as gun barrel, automatic loader, breechblock and the like.
What is a Ring Retaining Pliers Tip Set? 13 Items: A Ring Retaining Pliers Tip Set (TIP SET,PLIERS,RING RETAINING) is a collection of removable metallic tips in matched pairs used to provide various size capablities to PLIERS, RING RETAINING which permits the removal and installation of internal and external retaining rings.
What is a Plug Electrical Connector Extractor? 45 Items: A Plug Electrical Connector Extractor (EXTRACTOR,ELECTRICAL CONNECTOR,PLUG) is a hand tool designed to disassemble CONNECTOR, PLUG, ELECTRICAL from a CONNECTOR, RECEPTACLE, ELECTRICAL.
What is a Torque Wrench Adapter Set? 10 Items: A Torque Wrench Adapter Set (ADAPTER SET,TORQUE WRENCH) is tWO or more ADAPTER, TORQUE WRENCH of different sizes.
What is an Electronic Component Inserter And Remover? 79 Items: An Electronic Component Inserter And Remover (INSERTER AND REMOVER,ELECTRONIC COMPONENT) is an item which can insert or remove an electronic component package such as MICROCIRCUIT; RESISTOR, NETWORK (as modified); and the like from its mounting position or socket. Excludes INSERTER AND REMOVER, ELECTRICAL CONTACT; REMOVER, ELECTRICAL CONTACT; EXTRACTOR, ELECTRICAL CARD; EXTRACTOR, ELECTRONIC CRYSTAL UNIT; EXTRACTOR, ELECTRON TUBE.
What is an Impact Type Bit Set And Handle Screwdriver? 14 Items: An Impact Type Bit Set And Handle Screwdriver (SCREWDRIVER,BIT SET AND HANDLE,IMPACT TYPE) is an item consisting of a set of screwdriver bits and a impact driver to accommodate the bits of various types and characteristics. It is designed to transmit a strong rotating movement by the impact of a hammer blowed on the impact driver. It is used to loosen rusted or seized screws. Excludes SCREWDRIVER, BIT SET AND HANDLE.
What is a Hand Vise Jaw? 19 Items: A Hand Vise Jaw (JAW,VISE,HAND) is an item consisting of two opposing parts of a VISE, HAND. The item is moveable and able to open and close. It can hold, grasp or clamp work.
What is a Screwdriver Handle? 28 Items: A Screwdriver Handle (HANDLE,SCREWDRIVER) is an item used to accommodate various types of BIT, SCREWDRIVER. It is designed to rotate a bit that is used for installing or removing screws.
What is a Wire Twister Pliers? 25 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 284 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is a Mechanical Puller Body? 45 Items: A Mechanical Puller Body (BODY,PULLER,MECHANICAL) is an item designed to support and enclose the internal parts of a PULLER,MECHANICAL.
What is a Flat Tip And Cross Tip Screwdriver Set? 39 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is a Socket Wrench Screwdriver Attachment Set? 22 Items: A Socket Wrench Screwdriver Attachment Set (SCREWDRIVER ATTACHMENT SET,SOCKET WRENCH) is a set of screwdriver attachment, socket wrench of different sizes. Items consist of a female square drive on one end to attach to a handle, socket wrench and various screwdriver tip configurations on the opposite end. Excludes SCREWDRIVER ATTACHMENT,SOCKET WRENCH
What is an Oil Filter Wrench? 44 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 430 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Communications Equipment Spring Adjuster? 13 Items: A Communications Equipment Spring Adjuster (ADJUSTER,SPRING,COMMUNICATIONS EQUIPMENT) is a single or double end tool, equipped with slot(s) of various dimensions or with cylindrical rod(s), used for adjusting the springs or spring tensioned parts of electronic equipment.
What is a Rotating Members Aligning Tool? 32 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
What is a Final Drive Assembly Alignment Pin? 41 Items: A Final Drive Assembly Alignment Pin (ALIGNMENT PIN,FINAL DRIVE ASSEMBLY) is a special designed pin used in the assembling of the final drive.
Arm,Handling Tool 77 Items
What is a Splicing Sleeve Compressing Tool? 23 Items: A Splicing Sleeve Compressing Tool (COMPRESSING TOOL,SPLICING SLEEVE) is a hand tool having hinged leverage handles similar to a CUTTER, BOLT or pliers, designed to compress a splicing sleeve when joining the ends of two conductors, or when forming an eye splice in the end of a wire rope. Excludes CRIMPING TOOL, TERMINAL, HAND.
What is a Hand Screw Jack Extension? 14 Items: A Hand Screw Jack Extension (EXTENSION,HAND SCREW JACK) is a length of externally threaded rigid shafting which is the adjustable section of a JACK, SCREW, HAND.
What is a Mechanical Puller Gear Adapter? 21 Items: A Mechanical Puller Gear Adapter (GEAR ADAPTER,PULLER,MECHANICAL) is an adapter that adapts a PULLER,MECHANICAL, to pull a certain gear.
Handle,Hydraulic Jack 18 Items
What is a Female Electrical Contact Resizing Tool? 11 Items: A Female Electrical Contact Resizing Tool (RESIZING TOOL,FEMALE ELECTRICAL CONTACT) is a tool designed to shape to a specific size, female contacts such as those used on electrical connectors, tube sockets, crystal sockets, and pin jacks.
What is a Screwdriver And Socket Wrench Combination? 13 Items: A Screwdriver And Socket Wrench Combination is a hand-tool formed into an integral unit with a socket wrench at one end and a screwdriver bit at the other end. See also SCREWDRIVER AND WRENCH ASSEMBLY.
What is a Hand Hose Fitting Swaging Tool Kit? 11 Items: A Hand Hose Fitting Swaging Tool Kit (SWAGING TOOL KIT,HOSE FITTING,HAND) is a device, hydraulically actuated by hand or power operated pump, consisting of face plate, adapter plate, finger cages, fingers, ram, bushing, and expanding mandrels combined on a single base in various functional arrangements. It is used for swaging the outside diameter of hose assembly fittings, expanding the inside diameter of hose assemblies, and securing the fabrication of hose assemblies. Included are a hand or power operated pump, lubricant, cases, and trays.
What is a Catch Lever Tool? 12 Items: A Catch Lever Tool (LEVER TOOL,CATCH) is a specially designed hand tool which engages the opening and closing lever of a CATCH (as modified) for ease of operation. It is constructed of thin rigid material, usually flat, and one end has an engaging tongue.
What is a Manual Impact Wrench? 11 Items: A Manual Impact Wrench (WRENCH,IMPACT,MANUAL) is a manually operated handheld tool consisting of spring-loaded handle and a power-impact head which delivers a torsional impact from either continuous movement of the handle in one direction, or by a reciprocating action. It is used in tightening and loosening fasteners, such as bolts, nuts, and the like. The item may include sockets, extensions and offset fittings, nut runners, and the like.
What is a Drift? 63 Items: A Drift is an item consisting of a tubular body fitted with replaceable tips. It is designed to insert or remove mechanical components where space is restricted.
What is a Nutdriver? 46 Items: A Nutdriver is a non-powered hand tool with a screwdriver style handle, shaft and formed female hex or square socket at driving end.
What is a Locking Device Removal Tool? 12 Items: A Locking Device Removal Tool (REMOVAL TOOL,LOCKING DEVICE) is a hand tool designed to facilitate the removal of a WASHER, KEY and a LOCKING PLATE, NUT AND BOLT.
What is a Hydraulic Fitting Crimping Tool Head? 26 Items: A Hydraulic Fitting Crimping Tool Head (HEAD,CRIMPING TOOL,HYDRAULIC FITTING) is a component of a crimping tool used to compress fittings on fluid tubes. It consists of a U-shape item, in which, are mounted different sizes of DIE, CRIMPING TOOL for tubes of various diameters.
What is a Torque Screwdriver? 11 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.
What is a Special Purpose Combination Wrench? 13 Items: A Special Purpose Combination Wrench (WRENCH,COMBINATION,SPECIAL PURPOSE) is a tool having a combination of ends and facets. The ends may have open end, box or spanner characteristics. The sides may have features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s). Designed to fit specific items, not sized as standard or metric.
What is a Screwdriver Bit Holder? 56 Items: A Screwdriver Bit Holder (HOLDER,SCREWDRIVER BIT) is an attachment with a socket end for accepting male hexagon shank insert bits and a drive end for adapting to a portable power or hand tool.
What is a Telescoping Pole? 16 Items: A Telescoping Pole (POLE,TELESCOPING) is an item which is designed to be extended or compressed by the sliding of overlapping sections. This item may or may not be able to accommodate an extension.

Stock Items From Supply Class 5120 Page 59 of 110

5120-14-225-4045

5120-14-219-2191

5120-14-424-8094
Rigide Rallonge

144248094
804050: RNCC: 3 | RNVC: 2
804050: RNCC: 5 | RNVC: 9

9 Jun 1988

5120-14-329-9301

5120-14-214-3086

5120-14-225-9544
Outil Extracteur

142259544
104444: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-310-3173

5120-14-396-7981
Cle En Tube Coudee

143967981
3511 122 26581: RNCC: 3 | RNVC: 2

27 Nov 1984

5120-14-320-0703

5120-14-361-0410
Outillage Pr Buses

143610410
24545982500: RNCC: 3 | RNVC: 2
245459825: RNCC: 5 | RNVC: 9

19 Dec 1979

5120-14-432-7915
Crochet

144327915
0341547: RNCC: 3 | RNVC: 2
CKS.50: RNCC: 5 | RNVC: 2
CKS50: RNCC: 5 | RNVC: 2

27 Jun 1989

5120-14-444-7611
Cle De Reglage

144447611
0478-200500: RNCC: 3 | RNVC: 2

21 Jan 1991

5120-14-285-4467

5120-14-436-0210
Outil Extraction

144360210
806284: RNCC: 3 | RNVC: 2

29 Nov 1989

5120-14-560-7811
Pipe Wrench

145607811
011620: RNCC: 3 | RNVC: 2

26 May 2009

5120-14-409-8558
Cle De Couronne

144098558
IT172CC: RNCC: 3 | RNVC: 2

4 Jun 1986

5120-14-256-8895

5120-14-393-0323
Flat Tip Screwdriver

143930323
AGN14X250: RNCC: 3 | RNVC: 2

12 Apr 1984

5120-14-310-7316
Open End Wrench

143107316
MAS4681: RNCC: 3 | RNVC: 2
5011850: RNCC: 5 | RNVC: 2

1 Jan 1974

5120-14-490-2209
Spanner Wrench

144902209
1X56 136 463: RNCC: 3 | RNVC: 2
1X56 136 463: RNCC: 5 | RNVC: 2

19 Sep 1997

5120-14-434-3636
Torque Wrench Adapter

144343636
20180907: RNCC: 3 | RNVC: 2

20 Sep 1989

5120-14-375-8021
Vise Jaw Caps

143758021
300A97324: RNCC: 3 | RNVC: 2
91371401: RNCC: 5 | RNVC: 2
300A97324: RNCC: 5 | RNVC: 2
300A97324: RNCC: 5 | RNVC: 9
300A97324: RNCC: 5 | RNVC: 9

30 Mar 1982

5120-14-506-0607
Hand Material Handling Hook

145060607
CKS.61A: RNCC: 3 | RNVC: 2
3148513415014: RNCC: 5 | RNVC: 2
CKS.61: RNCC: 5 | RNVC: 2
CKS61: RNCC: 5 | RNVC: 2

2 Apr 1998

5120-14-525-9880
Screwdriver Bit Set And Handle

145259880
DM.794: RNCC: 3 | RNVC: 2

25 Jun 2001

5120-14-472-1635
Torque Wrench Adapter

144721635
1091002D00: RNCC: 3 | RNVC: 2

11 Oct 1994

5120-14-424-5253
Spanner Wrench

144245253
7M470: RNCC: 3 | RNVC: 2

26 May 1988

5120-14-481-9560
Flat Tip Screwdriver

144819560
AY.4X150VE: RNCC: 3 | RNVC: 2
3148510128559: RNCC: 5 | RNVC: 2
AY.4X150VSE: RNCC: 5 | RNVC: 2
0115287S00: RNCC: 5 | RNVC: 2
0012855: RNCC: 5 | RNVC: 9

13 Jun 1996

5120-14-551-6876
Spanner Wrench

145516876
61487578AA: RNCC: 3 | RNVC: 2

16 Oct 2006

5120-14-338-4359
Trepied De Verin

143384359
330A91-0120-00: RNCC: 3 | RNVC: 2

6 Nov 1976

5120-14-530-2873
Mechanical Puller Attachment

145302873
U.23D12: RNCC: 3 | RNVC: 2
U23D12: RNCC: 5 | RNVC: 2
3148510668321: RNCC: 5 | RNVC: 2

28 May 2002

5120-14-323-4924
Pince Positionneur

143234924
8400-1607: RNCC: 3 | RNVC: 2
91389007: RNCC: 3 | RNVC: 9

1 Jan 1975

5120-14-369-1871
Positionneur Axe

143691871
365A93-4145-00: RNCC: 3 | RNVC: 2

17 Apr 1981

5120-14-259-3498
Cliquet

142593498
GSM193-06REP3: RNCC: 3 | RNVC: 2

1 Jan 1969

5120-14-260-3983
Tete De Cliquet

142603983
MS654-40: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-247-3720
Adaptateur Special

142473720
PR46492: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-566-6999
Screw Thread Insert Tang Breakoff Tool

145666999
0510: RNCC: 3 | RNVC: 2
71810100001: RNCC: 5 | RNVC: 2

8 Dec 2010

5120-14-040-5485
Hand Terminal Crimping Tool

140405485
69376-1: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-389-8345
Injecteur Outillage

143898345
036409352: RNCC: 3 | RNVC: 2

20 Dec 1983

5120-14-424-1341
Cle Obj

144241341
080202597000: RNCC: 3 | RNVC: 2

17 May 1988

5120-14-225-3991

5120-14-574-1557
Socket Head Screw Key

145741557
67-8A: RNCC: 3 | RNVC: 2

12 Dec 2012

5120-14-263-2679

5120-14-391-6473

5120-14-548-7832
Socket Wrench Socket

145487832
SJ.19H: RNCC: 3 | RNVC: 2

9 Feb 2006

5120-14-363-0035
Open End Wrench

143630035
213928: RNCC: 3 | RNVC: 2

3 Apr 1980

5120-14-323-4743
Face Spanner Wrench Socket

143234743
61761: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-459-1619
Bearing And Bushing Inserter And Remover

144591619
45056170: RNCC: 3 | RNVC: 2
45056170: RNCC: 5 | RNVC: 9

19 Nov 1992

5120-14-451-7780
Seal Inserter And Remover

144517780
600047: RNCC: 3 | RNVC: 2

4 Dec 1991

5120-14-453-6984
Mechanical Puller Adapter

144536984
540870: RNCC: 3 | RNVC: 2

5 Mar 1992

5120-14-343-4166
Socket Head Screw Key

143434166
99078562: RNCC: 3 | RNVC: 2
99078562: RNCC: 3 | RNVC: 9

16 Jun 1977

5120-14-273-3177

5120-14-462-5888
Mise En Forme Bague

144625888
S16-0611-1990: RNCC: 3 | RNVC: 2

28 Apr 1993

5120-14-536-5294
Combination Box And Open End Wrench

145365294
40.15/16LA: RNCC: 3 | RNVC: 2
3148516620040: RNCC: 5 | RNVC: 2

28 Aug 2003

5120-14-322-9751
Spanner Wrench

143229751
121E95-152-00-0: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-495-9536
Mattock

144959536
NO PRIMARY REF14-495-9536: RNCC: 3 | RNVC: 2
5601CHA2-320BM: RNCC: 5 | RNVC: 9
5601-11: RNCC: 5 | RNVC: 9
65120 14 201 2366: RNCC: 5 | RNVC: 9
F300 0T 020 5864: RNCC: 5 | RNVC: 9

15 Oct 1997

5120-14-247-2032

5120-14-357-9986
R Compression Outil

143579986
MGD231-25: RNCC: 3 | RNVC: 2
MGD231-25: RNCC: 5 | RNVC: 2

20 Jul 1979

5120-14-334-1846
Pneumatic Tire Valve Core Inserter And Remover

143341846
R59-2: RNCC: 3 | RNVC: 2
R-0059-2: RNCC: 5 | RNVC: 2
059: RNCC: 5 | RNVC: 2
35425-07: RNCC: 5 | RNVC: 2
059: RNCC: 5 | RNVC: 9
85-688-2326: RNCC: 6 | RNVC: 9

23 Apr 1976

5120-14-427-2151
Equipe Support

144272151
46AM101-02: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-431-1053
Socket Wrench Socket

144311053
K.29A: RNCC: 3 | RNVC: 2
3148510292755: RNCC: 5 | RNVC: 2
K29A: RNCC: 5 | RNVC: 2
0029275: RNCC: 5 | RNVC: 9
91629359: RNCC: 5 | RNVC: 9

5 Apr 1989

5120-14-490-6827
Moule

144906827
217 M 03026 000: RNCC: 3 | RNVC: 2
F300 0T 000 0926: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-548-4788
Socket Wrench Socket

145484788
K.35HB: RNCC: 3 | RNVC: 2
00.51.79.38: RNCC: 5 | RNVC: 2

19 Jan 2006

5120-14-469-2283
Bearing And Bushing Inserter And Remover

144692283
40N108337-1: RNCC: 3 | RNVC: 2

13 Apr 1994

5120-14-451-1399
Spanner Wrench

144511399
2-46268: RNCC: 3 | RNVC: 2

31 Oct 1991

5120-14-222-6192

5120-14-566-7913
Combination Box And Open End Wrench Set

145667913
67F.JP9: RNCC: 3 | RNVC: 9
3148517941892: RNCC: 5 | RNVC: 9

20 Dec 2010

5120-14-459-1642
Bearing Staking Installation Tool

144591642
45215132: RNCC: 3 | RNVC: 2
45215132: RNCC: 5 | RNVC: 9

19 Nov 1992

5120-14-342-3609
Open End Wrench

143423609
RT9358: RNCC: 3 | RNVC: 2
RT9358: RNCC: 5 | RNVC: 2

14 Apr 1977

5120-14-526-1957
Cross Tip Screwdriver

145261957
3148510134055: RNCC: 3 | RNVC: 2
013405: RNCC: 5 | RNVC: 2
AZD.1X75: RNCC: 5 | RNVC: 2

9 Jul 2001

5120-14-384-6260
Electrical Card Extractor

143846260
16928990: RNCC: 3 | RNVC: 2
16928990: RNCC: 5 | RNVC: 9

2 Jun 1983

5120-14-321-7507
Flat Tip Screwdriver Set

143217507
AR3PC: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-321-1584
Screw Thread Insert Inserter

143211584
01500104000: RNCC: 3 | RNVC: 2
1735A04070: RNCC: 5 | RNVC: 2
32070440: RNCC: 5 | RNVC: 2
32240440: RNCC: 5 | RNVC: 2
01500104000: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-425-8269
Socket Wrench Spanner Attachment

144258269
FGFB932304: RNCC: 3 | RNVC: 2

21 Jul 1988

5120-14-333-6540
Flat Tip Screwdriver

143336540
AB.10X200: RNCC: 3 | RNVC: 2
3148510035208: RNCC: 5 | RNVC: 2
AB10X200: RNCC: 5 | RNVC: 2
91394745: RNCC: 5 | RNVC: 2
0003520: RNCC: 5 | RNVC: 9

23 Apr 1976

5120-14-313-7219
Spanner Wrench

143137219
C46895: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-338-3519
Spanner Wrench

143383519
14369-5006: RNCC: 3 | RNVC: 2

6 Nov 1976

5120-14-526-3152
Lifting Pneumatic Bag Kit

145263152
40902: RNCC: 3 | RNVC: 2

18 Jul 2001

5120-14-243-1597

5120-14-247-4513

5120-14-570-1877
Face Spanner Wrench Socket

145701877
UFA33266: RNCC: 3 | RNVC: 2

25 Nov 2011

5120-14-226-3733

5120-14-295-6236

5120-14-255-9986
Outil Pour Extraire

142559986
24545903000: RNCC: 3 | RNVC: 2
145J30: RNCC: 5 | RNVC: 9

1 Jan 1969

5120-14-356-2228
Intermedia Fourrure

143562228
300013908: RNCC: 3 | RNVC: 2
A3908: RNCC: 5 | RNVC: 2

25 Apr 1979

5120-14-380-8382
Faux Mors

143808382
C46171: RNCC: 3 | RNVC: 2

14 Dec 1982

5120-14-532-9623
Drift And Drive Set Punch Set

145329623
247L.248JS12: RNCC: 3 | RNVC: 2

14 Jan 2003

5120-14-040-2907
Spanner Wrench

140402907
RT5365: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-407-2056
Spanner Wrench

144072056
101663: RNCC: 3 | RNVC: 2

12 Feb 1986

5120-14-539-2619
Mechanical Puller Body

145392619
T632G3004801: RNCC: 3 | RNVC: 2

17 Dec 2003

5120-14-201-9696
Open End Wrench

142019696
31-8X10: RNCC: 3 | RNVC: 2

1 Jan 1962

5120-14-252-5653
Retaining Ring Pliers

142525653
43D: RNCC: 3 | RNVC: 9
190-376: RNCC: 5 | RNVC: 2
43D: RNCC: 5 | RNVC: 2
43D: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-228-3045

5120-14-551-5903
Cable Tie Installation Tool

145515903
33.542: RNCC: 3 | RNVC: 2

6 Oct 2006

5120-14-214-2521
Spanner Wrench

142142521
46148: RNCC: 3 | RNVC: 2
46148: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-438-0208
Spanner Wrench

144380208
095457H: RNCC: 3 | RNVC: 2
09572: RNCC: 5 | RNVC: 2

6 Mar 1990

5120-14-228-7206
Open End Wrench

142287206
10EC08X9: RNCC: 3 | RNVC: 2
3599050: RNCC: 5 | RNVC: 2
44EC8X9: RNCC: 5 | RNVC: 2
10CM8X9: RNCC: 5 | RNVC: 2

1 Jan 1966

5120-14-469-9267
Mechanical Puller Attachment

144699267
16380250: RNCC: 3 | RNVC: 2
16380250: RNCC: 5 | RNVC: 9

18 May 1994

5120-14-430-8234
Hand Terminal Crimping Tool

144308234
69067: RNCC: 3 | RNVC: 2

22 Mar 1989

5120-14-571-7333
Screwdriver Bit

145717333
NEV-T-45: RNCC: 3 | RNVC: 2

26 Apr 2012

5120-14-233-5232
Cle A Oeil Speciale

142335232
9970-115-017: RNCC: 3 | RNVC: 2
171-181: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-207-7590
Cant Hook And Peavy Handle

142077590
NO PRIMARY REF14-207-7590: RNCC: 3 | RNVC: 2
ST100RT5-329: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-032-0743
Face Spanner Wrench Socket

140320743
330A93-2000-20: RNCC: 3 | RNVC: 2

5 Jul 1980

5120-14-339-1315
Verin De Montage

143391315
SPL20499: RNCC: 3 | RNVC: 2

17 Dec 1976

5120-14-537-5226
Outil D'installatio

145375226
057-0602-80: RNCC: 3 | RNVC: 2

3 Nov 2003

5120-14-233-4352

5120-14-356-9967

5120-14-262-5501
Pousse Roulement

142625501
0-62136-1: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-455-4502
Tige De Cle

144554502
0T2-2-16: RNCC: 3 | RNVC: 2
0T2-2-16: RNCC: 5 | RNVC: 9

21 May 1992

5120-14-424-7547
Socket Head Screw Key

144247547
84B.2,5: RNCC: 3 | RNVC: 2
84B2,5: RNCC: 5 | RNVC: 2

8 Jun 1988

5120-14-220-8532
Mordache Speciale P

142208532
PR46372: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-462-9849
Cle A Creneaux

144629849
T700A3299000007: RNCC: 3 | RNVC: 2

12 May 1993

5120-14-333-3213

5120-14-241-5191

5120-14-214-6079
Spanner Wrench

142146079
0UT8: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-316-1608
Outil Emmench Joint

143161608
A129797: RNCC: 3 | RNVC: 2
100301: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-241-6079

5120-14-259-4788

5120-14-570-5428
Electrical Connector Inserter

145705428
61926027AA: RNCC: 3 | RNVC: 2

4 Jan 2012

5120-14-212-9125
Cle Ouverte Special

142129125
9970-115-217: RNCC: 3 | RNVC: 2
9970-115-217-01: RNCC: 3 | RNVC: 2

1 Jan 1964

5120-14-508-2007
C Outil De Montage

145082007
NO PRIMARY REF14-508-2007: RNCC: 3 | RNVC: 2
40196022: RNCC: 5 | RNVC: 2

28 Aug 1998

5120-14-268-0917
Screwdriver Bit

142680917
RU761-43M922P1: RNCC: 3 | RNVC: 2
761-43M922P1: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-574-3890
Hand Pipe And Sewer Auger

145743890
2907 25: RNCC: 3 | RNVC: 2

15 Jan 2013

5120-14-577-7834
Screw Push-Pull Jack

145777834
82679734001: RNCC: 3 | RNVC: 2

9 Oct 2013

5120-14-297-4803

5120-14-316-1583
Mandrin Pose Bague

143161583
C66081: RNCC: 3 | RNVC: 2
100997: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-298-9231

5120-14-394-9018
Socket Wrench Screwdriver Attachment

143949018
SM14: RNCC: 3 | RNVC: 2

2 Oct 1984

5120-14-239-6360

5120-14-304-0375
Open End Wrench

143040375
44S26X28: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-525-9514
Six Point Tip Screwdriver

145259514
888-456-500-1: RNCC: 3 | RNVC: 2

20 Jun 2001

5120-14-374-2933
Screwdriver Bit

143742933
150-8: RNCC: 3 | RNVC: 2
57-1: RNCC: 5 | RNVC: 9
85-691-6889: RNCC: 6 | RNVC: 9

8 Dec 1981

5120-14-453-1734
Embout Cle Poincon

144531734
0880798T00: RNCC: 3 | RNVC: 2
85-694-3228: RNCC: 6 | RNVC: 9

5 Feb 1992

5120-14-421-6308
Socket Wrench Crowfoot Attachment

144216308
210107: RNCC: 3 | RNVC: 2

20 Jan 1988

5120-14-524-4972
Spanner Wrench

145244972
6402POC: RNCC: 3 | RNVC: 2

21 Mar 2001

5120-14-444-8828
Flat Tip Screwdriver

144448828
0882653L00: RNCC: 3 | RNVC: 2

28 Jan 1991

5120-14-511-2947
Screwdriver Bit Holder

145112947
NS.237: RNCC: 3 | RNVC: 2
3148510433653: RNCC: 5 | RNVC: 2

14 Dec 1998

5120-14-407-2054
Spanner Wrench

144072054
101660: RNCC: 3 | RNVC: 2

12 Feb 1986

5120-14-550-5499
Open End Wrench

145505499
61710665AA: RNCC: 3 | RNVC: 2

23 Jun 2006

5120-14-497-8244
Socket Head Screw Key

144978244
84TZ.8: RNCC: 3 | RNVC: 2
3148511256572: RNCC: 5 | RNVC: 2
0240786Y00: RNCC: 5 | RNVC: 2
0715 33 23: RNCC: 5 | RNVC: 2
0125657: RNCC: 5 | RNVC: 9

21 Oct 1997

5120-14-483-0734
Socket Wrench Socket Set

144830734
R.426UP: RNCC: 3 | RNVC: 2
3148515126208: RNCC: 5 | RNVC: 2
512620: RNCC: 5 | RNVC: 2

8 Aug 1996

5120-14-552-7610
Screwdriver Bit Set And Handle

145527610
AMZ.3: RNCC: 3 | RNVC: 2
AMZ.3: RNCC: 5 | RNVC: 2
3148515005190: RNCC: 5 | RNVC: 2

30 Jan 2007

5120-14-370-3422
Terminal Crimping Tool Contact Positioner

143703422
483261-5: RNCC: 3 | RNVC: 2
601966-5: RNCC: 3 | RNVC: 2

18 May 1981

5120-14-493-6914
Slip Joint Pliers

144936914
482.CPY: RNCC: 3 | RNVC: 2
482.CPY: RNCC: 5 | RNVC: 2
166/171/5: RNCC: 5 | RNVC: 2
3148511788301: RNCC: 5 | RNVC: 2
235-2707: RNCC: 5 | RNVC: 2
0714 02 77: RNCC: 5 | RNVC: 2
0178830: RNCC: 5 | RNVC: 9
FACOM482.CPY: RNCC: 5 | RNVC: 9

13 Oct 1997

5120-14-234-3646
Cle A Douille

142343646
P02433: RNCC: 3 | RNVC: 2
0000330481: RNCC: 3 | RNVC: 2
0000330481: RNCC: 5 | RNVC: 9
330481: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-548-6602
Socket Wrench Socket

145486602
S.17HLA: RNCC: 3 | RNVC: 2
00.49.37.87: RNCC: 5 | RNVC: 2

30 Jan 2006

5120-14-410-6337
Cle Maintien Poulie

144106337
P4-4: RNCC: 3 | RNVC: 2
P4-4: RNCC: 5 | RNVC: 9

9 Jul 1986

5120-14-558-4367
Socket Wrench

145584367
5181155: RNCC: 3 | RNVC: 2

2 Oct 2008

5120-14-280-8779

5120-14-514-2105
Screw Thread Insert Inserter

145142105
01500286951: RNCC: 3 | RNVC: 2

28 Apr 1999

5120-14-543-2513
Combination Box And Open End Wrench Set

145432513
40.JU12: RNCC: 3 | RNVC: 2
3148515287503: RNCC: 5 | RNVC: 2

9 Oct 2004

5120-14-524-8933
Socket Wrench Socket

145248933
SJ.26: RNCC: 3 | RNVC: 2

25 Apr 2001

5120-14-357-9953
Support Adaptateur

143579953
MKM0423900: RNCC: 3 | RNVC: 2
MKM0423900: RNCC: 5 | RNVC: 2

20 Jul 1979

5120-14-427-9414
Helice Cle

144279414
OU0078001: RNCC: 3 | RNVC: 2

24 Nov 1988

5120-14-255-7359

5120-14-457-9073
Cle Ergo Adaptateur

144579073
1: RNCC: 3 | RNVC: 2
386971-Z15CN16-02: RNCC: 3 | RNVC: 2
70019278: RNCC: 3 | RNVC: 2
386971-Z15CN16-02: RNCC: 5 | RNVC: 9
70019278: RNCC: 5 | RNVC: 9

30 Sep 1992

5120-14-392-0869

5120-14-326-5794

5120-14-352-7975
Couronne Outil Fix

143527975
00160200: RNCC: 3 | RNVC: 2
VDP7431: RNCC: 5 | RNVC: 2

14 Nov 1978

5120-14-279-1291

5120-14-219-3268

5120-14-218-9670

5120-14-389-3546
Commande Poussoir

143893546
MGD1220205: RNCC: 3 | RNVC: 2
MGD1220205: RNCC: 5 | RNVC: 2

19 Dec 1983

5120-14-491-0164
Cle

144910164
4602 007 200 212: RNCC: 3 | RNVC: 2
F300 0T 001 0952: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-217-2704

5120-14-538-2452
Spanner Wrench

145382452
NGM0010033753523: RNCC: 2 | RNVC: 2

9 Dec 2003

5120-14-514-2611
Socket Head Screw Key

145142611
82JP9: RNCC: 3 | RNVC: 2
82.JP9: RNCC: 5 | RNVC: 2

5 May 1999

5120-14-459-1668
Bearing Staking Installation Tool

144591668
45215426: RNCC: 3 | RNVC: 2
45215426: RNCC: 5 | RNVC: 9

19 Nov 1992

5120-14-510-7131
Cross Tip Screwdriver

145107131
CK4732PH1: RNCC: 3 | RNVC: 2

9 Nov 1998

5120-14-468-9808
Bearing And Bushing Inserter And Remover

144689808
40N108117: RNCC: 3 | RNVC: 2

30 Mar 1994

5120-14-397-4862
Terminal Crimping Tool Contact Positioner

143974862
73040004: RNCC: 3 | RNVC: 2

14 Dec 1984

5120-14-317-3451
Wrench Extension Handle

143173451
C47189: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-328-6718
Screwdriver Bit

143286718
RE5: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-283-1310
Spanner Wrench

142831310
T0120BBF5APL11: RNCC: 3 | RNVC: 2
403664T: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-205-9832
Bloc De Presertissa

142059832
PSF14K: RNCC: 3 | RNVC: 2
A1114PSA: RNCC: 5 | RNVC: 2
RT3595: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-204-8814

5120-14-465-4704
Bearing And Bushing Inserter And Remover

144654704
851-500-149-0: RNCC: 3 | RNVC: 2

30 Sep 1993

5120-14-373-0991
Spanner Wrench

143730991
1-1038-02-115: RNCC: 3 | RNVC: 9
1-1038-02-115: RNCC: 5 | RNVC: 9

21 Sep 1981

5120-14-314-9110
Open End Wrench

143149110
M2-060-2: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-525-9515
Handling Tool Arm

145259515
888-389-000-2: RNCC: 3 | RNVC: 2

20 Jun 2001

5120-14-488-3032
Pliers

144883032
193.16EG: RNCC: 3 | RNVC: 2
193-16EG: RNCC: 5 | RNVC: 2
0144830: RNCC: 5 | RNVC: 2
3148511448304: RNCC: 5 | RNVC: 2

29 Apr 1997

5120-14-542-4411
Spanner Wrench

145424411
30MS147-48: RNCC: 3 | RNVC: 2

13 Jul 2004

5120-14-544-7783
Detent Handling Tool

145447783
6501CDC130: RNCC: 3 | RNVC: 2

23 Feb 2005

5120-14-550-8777
Socket Wrench Socket Set

145508777
8817298000: RNCC: 3 | RNVC: 2

25 Jul 2006

5120-14-440-3400
Spanner Wrench

144403400
F46838: RNCC: 3 | RNVC: 2

11 Jul 1990

5120-14-337-5393
Secteur De Serrage

143375393
0057400: RNCC: 3 | RNVC: 2
S.200Z: RNCC: 5 | RNVC: 2
S200Z: RNCC: 5 | RNVC: 2

7 Oct 1976

5120-14-454-9341
Socket Wrench Extension

144549341
S.213: RNCC: 3 | RNVC: 2
3148510579580: RNCC: 5 | RNVC: 2
0057958: RNCC: 5 | RNVC: 9

29 Apr 1992

5120-14-264-1575
Open End Wrench

142641575
10A2 3-8: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-544-2999
Socket Wrench Handle

145442999
R.120A: RNCC: 3 | RNVC: 2

18 Jan 2005

5120-14-471-8547
A Levier Extracteur

144718547
5001008488: RNCC: 3 | RNVC: 2

21 Sep 1994

5120-14-241-1537
Cle A Ergots Specia

142411537
0826-78: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-483-8694
Spanner Wrench

144838694
0-702429: RNCC: 3 | RNVC: 2

5 Oct 1996

5120-14-423-2297
Bras Cle Dyn

144232297
0747151: RNCC: 3 | RNVC: 2
SP.1735 D-1: RNCC: 5 | RNVC: 2
SP1735D-1: RNCC: 5 | RNVC: 2

13 Apr 1988

5120-14-376-3652
Abrasive Wheel Dresser Cutters

143763652
701012-1: RNCC: 3 | RNVC: 2
3272670212343: RNCC: 5 | RNVC: 2

30 Mar 1982

5120-14-347-2622

5120-14-340-0932
Cle Rochet Et Rallo

143400932
RK6666: RNCC: 3 | RNVC: 2

18 Jan 1977

5120-14-514-0114
Open End Wrench

145140114
ENFD29159-16X19: RNCC: 3 | RNVC: 2

22 Apr 1999

5120-14-235-8656

5120-14-201-8783

5120-14-249-4692
Cle Pour Cone De So

142494692
8000111200: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-264-1577
Open End Wrench

142641577
10A2 5-8: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-366-3188

5120-14-424-7060
Mise En Place Outil

144247060
NO PRIMARY REF14-424-7060: RNCC: 3 | RNVC: 2
0227200: RNCC: 5 | RNVC: 2
1805-28: RNCC: 5 | RNVC: 2
1805.28: RNCC: 5 | RNVC: 2

7 Jun 1988

5120-14-274-7880
Flat Tip Screwdriver

142747880
E74-351-1-2X8X150R0NDEIS0LEE: RNCC: 2 | RNVC: 2
225-4: RNCC: 5 | RNVC: 2
1560: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-040-7668
Screwdriver Bit

140407668
1020-6B: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-317-0311

5120-14-488-3171
Socket Wrench Socket

144883171
J.8LA: RNCC: 3 | RNVC: 2
0136120F00: RNCC: 5 | RNVC: 2
00.46.41.82: RNCC: 5 | RNVC: 2
3148510280011: RNCC: 5 | RNVC: 2
J8LA: RNCC: 5 | RNVC: 2
0028001: RNCC: 5 | RNVC: 9
F300 0T 023 6322: RNCC: 6 | RNVC: 9

30 Apr 1997

5120-14-272-3582

5120-14-566-0585
Hot Line Stick

145660585
TP12SC45: RNCC: 3 | RNVC: 2

15 Oct 2010

5120-14-467-1352
Bague Outillage

144671352
37M008-01-1: RNCC: 3 | RNVC: 2
85-693-7845: RNCC: 6 | RNVC: 9

16 Dec 1993

5120-14-238-2975

5120-14-395-7151

5120-14-241-9352
Extracteur Special

142419352
A160: RNCC: 3 | RNVC: 2
A160: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-241-1509
Cle A Ergots Specia

142411509
0760-78: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-574-4943
Ratchet Wrench

145744943
467.24: RNCC: 3 | RNVC: 2
67.24: RNCC: 3 | RNVC: 9
820181: RNCC: 5 | RNVC: 2
3148518201810: RNCC: 5 | RNVC: 2
741343: RNCC: 5 | RNVC: 9
3148517413436: RNCC: 5 | RNVC: 9

23 Jan 2013

5120-14-436-0285
Roulement Mandrin

144360285
RT32030: RNCC: 3 | RNVC: 2

29 Nov 1989

5120-14-208-9851

5120-14-347-7043
Spanner Wrench

143477043
M2-001: RNCC: 3 | RNVC: 2
85-689-4987: RNCC: 6 | RNVC: 9

1 Mar 1978

5120-14-540-9870
Blind Riveter Nosepiece

145409870
359-E-33: RNCC: 3 | RNVC: 2
359E33: RNCC: 5 | RNVC: 2

5 May 2004

5120-14-391-8796
Open End Wrench

143918796
NO PRIMARY REF14-391-8796: RNCC: 3 | RNVC: 2
1-1038-02-77: RNCC: 5 | RNVC: 9
1-1038-02-77: RNCC: 5 | RNVC: 9

21 Mar 1984

5120-14-489-3893
C Outil De Montage

144893893
3246-895-000: RNCC: 3 | RNVC: 2
1113291F00: RNCC: 5 | RNVC: 2
3246-895-000: RNCC: 5 | RNVC: 9

16 Jul 1997

5120-14-293-0184
Outillage Pr Accoup

142930184
NO PRIMARY REF14-293-0184: RNCC: 3 | RNVC: 2
BX44: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-241-1488
Cle A Ergots Specia

142411488
0688-78: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-261-5292
Tete Cle A Fourche

142615292
D25: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-239-6381

5120-14-302-5085

5120-14-227-9271
Open End Wrench

142279271
31.10X11: RNCC: 3 | RNVC: 2
3148510970202: RNCC: 5 | RNVC: 2
0232373D00: RNCC: 5 | RNVC: 2
31.10X11: RNCC: 5 | RNVC: 2
31-10X11: RNCC: 5 | RNVC: 2
91615806: RNCC: 5 | RNVC: 2
162-8407: RNCC: 5 | RNVC: 2
0097020: RNCC: 5 | RNVC: 9
FACOM31.10X11: RNCC: 5 | RNVC: 9

1 Jan 1966

5120-14-270-1812
Open End Wrench

142701812
NO PRIMARY REF14-270-1812: RNCC: 3 | RNVC: 2
175170: RNCC: 5 | RNVC: 9

1 Jan 1970

5120-14-447-3400
Screwdriver Bit

144473400
NO PRIMARY REF14-447-3400: RNCC: 3 | RNVC: 2
91714518: RNCC: 5 | RNVC: 2
ES110: RNCC: 5 | RNVC: 2
0024601: RNCC: 5 | RNVC: 2
ES.110: RNCC: 5 | RNVC: 2

15 May 1991

5120-14-368-1969
Spanner Wrench

143681969
0408-52011: RNCC: 3 | RNVC: 2

20 Feb 1981

5120-14-369-7611
Spanner Wrench

143697611
F46406: RNCC: 3 | RNVC: 2

17 Apr 1981

5120-14-457-9818
Seal Inserter And Remover

144579818
600048: RNCC: 3 | RNVC: 2
600048: RNCC: 5 | RNVC: 2
F300 0T 012 1639: RNCC: 6 | RNVC: 9

2 Oct 1992

5120-14-234-3602
Appareil Montage Sy

142343602
202466: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-572-2002
Torque Wrench Multiplier

145722002
MC.130B: RNCC: 3 | RNVC: 2
3148518167710: RNCC: 5 | RNVC: 2
816771: RNCC: 5 | RNVC: 2

14 Jun 2012

5120-14-232-4826

5120-14-200-3334

5120-14-461-6808
Rallonge Porte-Embo

5120-14-450-5339
Socket Wrench Adapter

144505339
256456: RNCC: 3 | RNVC: 2
256456: RNCC: 5 | RNVC: 9

9 Oct 1991

5120-14-530-2038
Retaining Ring Pliers

145302038
197G.23: RNCC: 3 | RNVC: 2
3148511457030: RNCC: 5 | RNVC: 2

22 May 2002

5120-14-463-5609
Bearing And Bushing Remover

144635609
45057913: RNCC: 3 | RNVC: 2
45057913: RNCC: 5 | RNVC: 9

17 Jun 1993

5120-14-399-7514
Socket Head Screw Key Blade

143997514
M4Z7101909303: RNCC: 3 | RNVC: 2

14 Mar 1985

5120-14-401-8575
Cle Serr Ecrou Cren

144018575
25545920900: RNCC: 3 | RNVC: 2
255459209: RNCC: 5 | RNVC: 9

13 Jun 1985

5120-14-507-7123

5120-14-302-4006
Screwdriver Handle

143024006
703A95-0000-21: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-474-5993
Rotating Members Aligning Tool

144745993
NO PRIMARY REF14-474-5993: RNCC: 3 | RNVC: 2
OU137569: RNCC: 5 | RNVC: 9

22 Feb 1995

5120-14-428-5338
Appui Plaque

144285338
MKA4492102: RNCC: 3 | RNVC: 2

8 Dec 1988

5120-14-245-8170
Cle Speciale

142458170
D22065A: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-236-2627

5120-14-571-1108
Mechanical Puller

145711108
A550210: RNCC: 3 | RNVC: 2

21 Feb 2012

5120-14-200-4157

5120-14-333-7354

5120-14-463-0647
Cle

144630647
2-47423: RNCC: 3 | RNVC: 2

17 May 1993

5120-14-569-6585
Socket Head Screw Key

145696585
83S.2,5L: RNCC: 3 | RNVC: 2
3148511248942: RNCC: 5 | RNVC: 2
124894: RNCC: 5 | RNVC: 2

10 Oct 2011

5120-14-544-9977
Pliers

145449977
439.1: RNCC: 3 | RNVC: 2

14 Mar 2005

5120-14-528-6748
Socket Head Screw Key

145286748
82H.5/8: RNCC: 3 | RNVC: 2
SYQ0760: RNCC: 5 | RNVC: 2

5 Feb 2002

5120-14-578-4252
Torque Screwdriver

145784252
262287753: RNCC: 3 | RNVC: 2

28 Nov 2013

5120-14-530-7134
Socket Wrench Extension

145307134
28904: RNCC: 3 | RNVC: 2
3148510289045: RNCC: 5 | RNVC: 2
J.210RC: RNCC: 5 | RNVC: 2

3 Jul 2002

5120-14-334-8133
Socket Head Screw Key

143348133
0124090: RNCC: 3 | RNVC: 2
83-9: RNCC: 5 | RNVC: 2
83.9: RNCC: 5 | RNVC: 2

2 Jun 1976

5120-14-489-0321
Combination Box And Open End Wrench

144890321
39.7: RNCC: 3 | RNVC: 2
3148510998725: RNCC: 5 | RNVC: 2
0099872: RNCC: 5 | RNVC: 9

18 Jun 1997

5120-14-493-0055
Cle

144930055
4065 030 001 024: RNCC: 3 | RNVC: 2
F300 0T 009 4402: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-250-8357
Hand Terminal Crimping Tool

142508357
1000PC2E: RNCC: 3 | RNVC: 2
1000PC2E: RNCC: 5 | RNVC: 9
720712: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-203-1426
Hand-Operated Grommet And Eyelet Press

142031426
10AMAIN: RNCC: 3 | RNVC: 2

1 Jan 1963

5120-14-237-3722
Spanner Wrench

142373722
H90R1019A: RNCC: 3 | RNVC: 2
530523: RNCC: 5 | RNVC: 2
H90R1019A: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-456-3084
Open End Wrench

144563084
32730: RNCC: 3 | RNVC: 2

25 Jun 1992

5120-14-391-4239
Electronic Equipment Alignment Tool

143914239
HT.2X2,4: RNCC: 3 | RNVC: 2
46252339: RNCC: 5 | RNVC: 2
HT101: RNCC: 5 | RNVC: 2
91522618: RNCC: 5 | RNVC: 2
3148510270708: RNCC: 5 | RNVC: 2
HT.101: RNCC: 5 | RNVC: 2
91792517: RNCC: 5 | RNVC: 2
0027070: RNCC: 5 | RNVC: 9

1 Mar 1984

5120-14-471-0837
Cle Pour Ipd

144710837
1060539: RNCC: 3 | RNVC: 2
RAB3410: RNCC: 5 | RNVC: 2

26 Jul 1994

5120-14-246-0148
Open End Wrench

142460148
M16-018: RNCC: 3 | RNVC: 2
M16-018: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-393-0274
Combination Box And Open End Wrench

143930274
41.13: RNCC: 3 | RNVC: 2
3148511013601: RNCC: 5 | RNVC: 2
41-13: RNCC: 5 | RNVC: 2
0184646E00: RNCC: 5 | RNVC: 2
91564509: RNCC: 5 | RNVC: 2
247-9751: RNCC: 5 | RNVC: 2
0101360: RNCC: 5 | RNVC: 9

12 Apr 1984

5120-14-379-4866
Faux Remontoir

143794866
605-01-15: RNCC: 3 | RNVC: 2
85-692-2568: RNCC: 6 | RNVC: 9

1 Oct 1982

5120-14-369-4856
Emmanche Joints

143694856
851-600-046-0: RNCC: 3 | RNVC: 2

17 Apr 1981

5120-14-241-6043

5120-14-511-3872
Flat Tip Screwdriver

145113872
AZFH.8X175: RNCC: 3 | RNVC: 2
AZFH.8X175: RNCC: 5 | RNVC: 2
13438: RNCC: 5 | RNVC: 2
0613 232 8: RNCC: 5 | RNVC: 2
3148510134383: RNCC: 5 | RNVC: 2
AZF 8X175: RNCC: 5 | RNVC: 2

16 Dec 1998

5120-14-561-1725
Combination Box And Open End Wrench

145611725
440.17: RNCC: 3 | RNVC: 2
91892895: RNCC: 5 | RNVC: 2
440.17: RNCC: 5 | RNVC: 2
3148517680449: RNCC: 5 | RNVC: 2
768044: RNCC: 5 | RNVC: 9

22 Jun 2009

5120-14-222-7102

5120-14-353-2108
Open End Wrench

143532108
001392050P: RNCC: 3 | RNVC: 2

8 Dec 1978

5120-14-342-0100
Electrical Card Extractor

143420100
9Q29Y: RNCC: 3 | RNVC: 2

14 Apr 1977

5120-14-373-6768
Wrench Extension Handle

143736768
225771: RNCC: 3 | RNVC: 2

13 Nov 1981

5120-14-361-8472
Socket Wrench Socket

143618472
8812944000: RNCC: 3 | RNVC: 2

20 Feb 1980

5120-14-501-8674
Bearing And Bushing Inserter And Remover

145018674
1X56 137 415: RNCC: 3 | RNVC: 2
1X56 137 415: RNCC: 5 | RNVC: 2

17 Nov 1997

5120-14-490-9199
Cle

144909199
4169 151 270 000: RNCC: 3 | RNVC: 2
F300 0T 000 5666: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-491-0124
Cle

144910124
4602 007 200 039: RNCC: 3 | RNVC: 2
F300 0T 001 0910: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-222-1445
Offset Screwdriver

142221445
NO PRIMARY REF14-222-1445: RNCC: 3 | RNVC: 2
BE79-99: RNCC: 5 | RNVC: 9

1 Jan 1966

5120-14-552-7384
Hydraulic Jack Handle

145527384
LEVIER/2893: RNCC: 3 | RNVC: 2

26 Jan 2007

5120-14-284-1882
Spanner Wrench

142841882
BEAE1173: RNCC: 3 | RNVC: 2
PA355-143A1P1: RNCC: 3 | RNVC: 9
PA355-143A1P1: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-416-7586
Mandrin Presse

144167586
537434: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-572-0314
Torque Wrench

145720314
3136470: RNCC: 3 | RNVC: 2

4 Jun 2012

5120-14-229-5404
Doigt En Bronze Dal

142295404
4320134: RNCC: 3 | RNVC: 2
4320134: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-574-2754
Torque Wrench

145742754
E.316A30R: RNCC: 3 | RNVC: 2

21 Dec 2012

5120-14-430-4159
Outillage Pour Evas

144304159
167-168-169: RNCC: 3 | RNVC: 2

20 Mar 1989

5120-14-370-1112
Jeu Pointe A Tracer

143701112
234PC: RNCC: 3 | RNVC: 2
130058: RNCC: 5 | RNVC: 2

18 May 1981

5120-14-463-6322
Cle A Virer

144636322
38126: RNCC: 3 | RNVC: 2

23 Jun 1993

5120-14-565-0420
Socket Head Screw Key Set

145650420
TOOLS-6: RNCC: 3 | RNVC: 2

1 Jul 2010

5120-14-519-4256
Cle A Frapper

145194256
MTFLXM9005200A: RNCC: 3 | RNVC: 2

17 Mar 2000

5120-14-295-2702
Pompe Chasse-Poussi

142952702
NO PRIMARY REF14-295-2702: RNCC: 3 | RNVC: 2
5072: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-428-8923
Bearing And Bushing Inserter

144288923
6802K33-1058-01: RNCC: 3 | RNVC: 2

22 Dec 1988

5120-14-228-5208

5120-14-333-6859
A Pied Soufflet

143336859
3105: RNCC: 3 | RNVC: 2
197472: RNCC: 5 | RNVC: 2
22941B: RNCC: 5 | RNVC: 2
45390: RNCC: 5 | RNVC: 2

23 Apr 1976

5120-14-225-2818
Cle A Fusees V Dixn

142252818
73039: RNCC: 3 | RNVC: 2
530126: RNCC: 5 | RNVC: 2

1 Jan 1966

5120-14-576-6308
Mechanical Puller S

145766308
8812167004: RNCC: 3 | RNVC: 2

2 Jul 2013

5120-14-249-9423
Socket Wrench Socket

142499423
NOPRIMARYREF142499423: RNCC: 3 | RNVC: 2
0028020: RNCC: 5 | RNVC: 2
J.10L: RNCC: 5 | RNVC: 2
J10L: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-429-1059
Socket Wrench Ratchet Attachment

144291059
S.372: RNCC: 3 | RNVC: 2
50092182: RNCC: 3 | RNVC: 2
0058900: RNCC: 5 | RNVC: 2
3148510589008: RNCC: 5 | RNVC: 2
S372: RNCC: 5 | RNVC: 2
1082073E00: RNCC: 5 | RNVC: 2

11 Jan 1989

5120-14-336-1071
Electrical Card Extractor

143361071
16607016: RNCC: 3 | RNVC: 2

24 Jul 1976

5120-14-274-7900

5120-14-340-8825
Spanner Wrench

143408825
951436A: RNCC: 3 | RNVC: 2

14 Feb 1977

5120-14-203-6575

5120-14-257-1782

5120-14-417-4616
Montage Plaque

144174616
1724772: RNCC: 3 | RNVC: 9

8 Jul 1987

5120-14-472-2166
Bearing And Bushing Remover

144722166
ZS1038-35: RNCC: 3 | RNVC: 2
132078: RNCC: 5 | RNVC: 2
V0KBB: RNCC: 5 | RNVC: 2
ZINZS1038-35: RNCC: 5 | RNVC: 9

12 Oct 1994

5120-14-491-0210
Outil

144910210
4602 010 800 002: RNCC: 3 | RNVC: 2
F300 0T 001 1005: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-567-8259
Plug Electrical Connector Extractor

145678259
251855162: RNCC: 3 | RNVC: 2

14 Apr 2011

5120-14-430-3429
Montage Essais Cle

144303429
RT16915: RNCC: 3 | RNVC: 2

15 Mar 1989

5120-14-412-3996
Cle A Contre Ecrou

144123996
7M414: RNCC: 3 | RNVC: 2
26AM001: RNCC: 3 | RNVC: 2

15 Oct 1986

5120-14-299-6505

5120-14-516-7994
Pince

145167994
5000260957: RNCC: 3 | RNVC: 2

18 Oct 1999

5120-14-392-0855

5120-14-371-4835
Sertiss Serre-Joint

143714835
6BFC20000AJ004: RNCC: 3 | RNVC: 2

5 Aug 1981

5120-14-333-3221
Dresse-Tube

143333221
2201200: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-479-4766
Open End Wrench

144794766
701858-00: RNCC: 3 | RNVC: 2

15 Jan 1996

5120-14-311-4550
Outillage Demmanche

143114550
3160S95-65-050: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-372-4875
Tubing Pinch-Off Tool

143724875
A0307-014: RNCC: 3 | RNVC: 2

1 Sep 1981

5120-14-483-6061
Bearing And Bushing Remover

144836061
6502E32-2668-00: RNCC: 3 | RNVC: 2

24 Sep 1996

5120-14-041-8723
Socket Wrench Adapter

140418723
ECR: RNCC: 3 | RNVC: 2
91307733: RNCC: 5 | RNVC: 2
ECR: RNCC: 5 | RNVC: 2
91307733: RNCC: 5 | RNVC: 2
0189168E00: RNCC: 5 | RNVC: 2
3148510226002: RNCC: 5 | RNVC: 2
0022600: RNCC: 5 | RNVC: 9
85-688-3375: RNCC: 6 | RNVC: 9

1 Jan 1974

5120-14-437-3580
Spanner Wrench

144373580
J00650-01S140P021: RNCC: 3 | RNVC: 2

30 Jan 1990

5120-14-554-4132
Socket Wrench Socket

145544132
260483836-00: RNCC: 3 | RNVC: 2

4 Jul 2007

5120-14-449-7162
Socket Wrench Socket

144497162
GS56-06: RNCC: 3 | RNVC: 2

4 Sep 1991

5120-14-490-6826
Light

144906826
217 L 07550 000: RNCC: 3 | RNVC: 2
F300 0T 000 0922: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-246-0574
Adjustable Wrench

142460574
125-8: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-468-7862
Socket Wrench Socket

144687862
J.1/4H: RNCC: 3 | RNVC: 2
3148510279503: RNCC: 5 | RNVC: 2
0027950: RNCC: 5 | RNVC: 9

22 Mar 1994

5120-14-296-8166
Socket Head Screw Key

142968166
260-75-12-01: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-406-9988
Simblot De Centrage

144069988
780BELOG2-3E: RNCC: 3 | RNVC: 2

24 Jan 1986

5120-14-490-8892
Filiere

144908892
4067 170 001 211: RNCC: 3 | RNVC: 2
F300 0T 000 5164: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-373-6746
Leve-Soupap Support

143736746
222848: RNCC: 3 | RNVC: 2

13 Nov 1981

5120-14-263-2686

5120-14-358-8257
Outil Montage Manoc

143588257
502669-1: RNCC: 3 | RNVC: 2

7 Sep 1979

5120-14-263-0678
Pince A Segments

142630678
DLT045527: RNCC: 3 | RNVC: 2
DLT045527: RNCC: 5 | RNVC: 9

1 Jan 1970

5120-14-249-9405
Socket Wrench Extension

142499405
J.216: RNCC: 3 | RNVC: 2
3148510289403: RNCC: 5 | RNVC: 2
J216: RNCC: 5 | RNVC: 2
0028940: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-321-1527
Open End Wrench

143211527
13 5-16X3-8: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-375-3649
Pompe A Dessouder

143753649
839-2: RNCC: 3 | RNVC: 2

26 Feb 1982

5120-14-379-9585
Socket Wrench Socket

143799585
4-19652: RNCC: 3 | RNVC: 2

20 Oct 1982

5120-14-249-9428
Socket Wrench Socket

142499428
0028110: RNCC: 3 | RNVC: 2
91355055: RNCC: 5 | RNVC: 2
J.19L: RNCC: 5 | RNVC: 2
J19L: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-216-1780
Spanner Wrench

142161780
B2142441-2: RNCC: 3 | RNVC: 2
2142441-2: RNCC: 3 | RNVC: 2
GC1340: RNCC: 5 | RNVC: 2

1 Jan 1965

5120-14-302-8090

5120-14-486-5722
Cle

144865722
RT5704: RNCC: 3 | RNVC: 2

25 Mar 1997

5120-14-234-4275

5120-14-406-2325
Cube Entraine-Roule

144062325
8RLC0111: RNCC: 3 | RNVC: 9
8RLB0111: RNCC: 5 | RNVC: 9
RAS8RLC0111: RNCC: 5 | RNVC: 9

8 Jan 1986

5120-14-249-5515

5120-14-350-6539

5120-14-250-8169
Body And Fender Spoon

142508169
M0B322: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-351-9465
Joint De Four Guide

143519465
07947-3330000: RNCC: 3 | RNVC: 2
07947-3330000: RNCC: 5 | RNVC: 2

16 Oct 1978

5120-14-571-2188
Pipe Wrench

145712188
131A.18: RNCC: 3 | RNVC: 2
FACOM 131A.18: RNCC: 5 | RNVC: 2

29 Feb 2012

5120-14-313-7227
Faux Mors

143137227
C47024: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-277-0275
Cle Speciale

142770275
521103: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-431-2353
Cle Spec Demi-Racco

144312353
JNBM16: RNCC: 3 | RNVC: 2

12 Apr 1989

5120-14-241-1432
Cle A Ergots Specia

142411432
0602-78: RNCC: 3 | RNVC: 2
RA602: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-490-6937
File

144906937
241 F 01576 000: RNCC: 3 | RNVC: 2
F300 0T 000 1067: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-552-7738
Flat Tip Screwdriver

145527738
ARA.3,5X75: RNCC: 3 | RNVC: 2
ARA.3,5X75: RNCC: 5 | RNVC: 2
3148510105208: RNCC: 5 | RNVC: 2

31 Jan 2007

5120-14-226-3727

5120-14-239-4452

5120-14-249-6813

5120-14-444-8292
Cle De Serrage

144448292
0478-203128: RNCC: 3 | RNVC: 2

23 Jan 1991

5120-14-558-2191

5120-14-578-1950
Inserter And Remove

145781950
8818688002: RNCC: 3 | RNVC: 2

8 Nov 2013

5120-14-384-6301
Electrical Card Extractor

143846301
16928951: RNCC: 3 | RNVC: 2
16928951: RNCC: 5 | RNVC: 9

2 Jun 1983

5120-14-523-5471
Hydraulic Fitting Crimping Tool Head

145235471
DLT10PSHAS008: RNCC: 3 | RNVC: 2

24 Jan 2001

5120-14-426-5580
Electronic Equipment Alignment Tool

144265580
16801462: RNCC: 3 | RNVC: 2
16801462: RNCC: 3 | RNVC: 9

8 Sep 1988

5120-14-421-7312
Bearing And Bushing Remover

144217312
8814839000: RNCC: 3 | RNVC: 2

27 Jan 1988

5120-14-548-9085
Bearing Staking Installation Tool

145489085
F26726000: RNCC: 3 | RNVC: 2

22 Feb 2006

5120-14-490-8752
Chassoi

144908752
4065 030 001 302: RNCC: 3 | RNVC: 2
F300 0T 000 5010: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-548-8097
Socket Wrench Socket

145488097
SJ.22H: RNCC: 3 | RNVC: 2

14 Feb 2006

5120-14-416-0211
Torque Wrench Adapter

144160211
M4Z6021900920: RNCC: 3 | RNVC: 2

3 Jun 1987

5120-14-373-6745
Valve Spring Lifter

143736745
228521: RNCC: 3 | RNVC: 2

13 Nov 1981

5120-14-364-1574
Cle De Serrage

143641574
16817235: RNCC: 3 | RNVC: 2

7 Aug 1980

5120-14-554-4397
Socket Wrench Socket Set

145544397
75-SH28: RNCC: 3 | RNVC: 2

5 Jul 2007

5120-14-455-8761
Quick Adjusting Screw Clamp

144558761
274.300: RNCC: 3 | RNVC: 2
3148511630303: RNCC: 5 | RNVC: 2
274-300: RNCC: 5 | RNVC: 2
91729291: RNCC: 5 | RNVC: 2
0163030: RNCC: 5 | RNVC: 9

11 Jun 1992

5120-14-329-6388
Flat Tip Screwdriver

143296388
MHG229-21: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-407-8794
Outil Montage Fil

144078794
291073-14: RNCC: 3 | RNVC: 2

5 Mar 1986

5120-14-422-2290
Socket Head Screw Key

144222290
0372-42-10078: RNCC: 3 | RNVC: 2

24 Feb 1988

5120-14-563-4830
Bearing And Bushing Remover

145634830
330A98-2085-05: RNCC: 3 | RNVC: 2

10 Feb 2010

5120-14-207-6323
Adjustable Wrench

142076323
E74-321-800: RNCC: 2 | RNVC: 2
4057-80MM: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-428-8355
Mechanical Puller Attachment

144288355
3511 190 99721: RNCC: 3 | RNVC: 2
89288241: RNCC: 5 | RNVC: 2
3511-190-99721: RNCC: 5 | RNVC: 2

22 Dec 1988

5120-14-411-7029
Socket Head Screw Key

144117029
043-03-01C3: RNCC: 3 | RNVC: 2

27 Aug 1986

5120-14-253-9780
Entretoise Extracte

142539780
C46100: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-273-7004

5120-14-204-3001

5120-14-414-1351
Poignee Dextraction

144141351
2-31042: RNCC: 3 | RNVC: 2

22 Jan 1987

5120-14-282-6670
Douille A Creneaux

142826670
C46936: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-229-3339
Cle A Douille

142293339
JBA0726: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-576-6126
Mechanical Puller S

145766126
8810546201: RNCC: 3 | RNVC: 2

1 Jul 2013

5120-14-208-7285

5120-14-488-5587
Retaining Ring Pliers

144885587
D5: RNCC: 3 | RNVC: 2
180AVSE: RNCC: 5 | RNVC: 9
0141655: RNCC: 5 | RNVC: 9
180A.VSE: RNCC: 5 | RNVC: 9
MO098809: RNCC: 6 | RNVC: 9

21 May 1997

5120-14-539-2586
Mechanical Puller Body

145392586
T623G3005124: RNCC: 3 | RNVC: 2

17 Dec 2003

5120-14-248-1284

5120-14-416-7491
Equipe Support

144167491
537249: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-374-6770

5120-14-371-1560
Bearing And Bushing Inserter And Remover Set

143711560
U.15: RNCC: 3 | RNVC: 2
3148510663500: RNCC: 5 | RNVC: 2
91360243: RNCC: 5 | RNVC: 2
0066350: RNCC: 5 | RNVC: 2
U15: RNCC: 5 | RNVC: 2

5 Jun 1981

5120-14-293-1401
Hand Tube Flaring Tool

142931401
2504-40: RNCC: 3 | RNVC: 2
4034-3: RNCC: 3 | RNVC: 9

1 Jan 1973

5120-14-369-9380
Socket Wrench Socket

143699380
K.33LA: RNCC: 3 | RNVC: 2
K33L: RNCC: 5 | RNVC: 2
00058103: RNCC: 5 | RNVC: 2
3148510302157: RNCC: 5 | RNVC: 2

18 May 1981

5120-14-481-8444
Torque Wrench Adapter

144818444
10.9: RNCC: 3 | RNVC: 2
3148510925202: RNCC: 5 | RNVC: 2
0092520: RNCC: 5 | RNVC: 9

4 Jun 1996

5120-14-338-4721
Extracteur Vis

143384721
C46487-1: RNCC: 3 | RNVC: 2

6 Nov 1976

5120-14-521-6329
Flat Tip Screwdriver

145216329
ACZH.8EX175: RNCC: 3 | RNVC: 2
ACGH.8EX200: RNCC: 5 | RNVC: 2
0613 240 9: RNCC: 5 | RNVC: 2
0004160: RNCC: 5 | RNVC: 9

30 Aug 2000

5120-14-454-3296
Socket Wrench Handle

144543296
V.950: RNCC: 3 | RNVC: 2
3148510779508: RNCC: 5 | RNVC: 2
0077950: RNCC: 5 | RNVC: 9

1 Apr 1992

5120-14-325-6122
Boucle Dextracteur

143256122
474017: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-578-4356
Pliers

145784356
MODM.CPE: RNCC: 3 | RNVC: 2
3148518521581: RNCC: 5 | RNVC: 2
A09901825: RNCC: 5 | RNVC: 2
Y00015155: RNCC: 5 | RNVC: 2

28 Nov 2013

5120-14-215-2257
Cle Speciale

142152257
RT2767: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-558-7756
Socket Wrench

145587756
9015: RNCC: 3 | RNVC: 9

4 Nov 2008

5120-14-454-2490
Spanner Wrench

144542490
45689441: RNCC: 3 | RNVC: 2

26 Mar 1992

5120-14-441-9365
Spanner Wrench

144419365
850153: RNCC: 3 | RNVC: 2

26 Sep 1990

5120-14-490-6427
Combination Box And Open End Box Wrench

144906427
70A.13: RNCC: 3 | RNVC: 2
3148511166536: RNCC: 5 | RNVC: 2
91777950: RNCC: 5 | RNVC: 2
0116653: RNCC: 5 | RNVC: 9

8 Oct 1997

5120-14-236-8776
Spanner Wrench

142368776
0829-78: RNCC: 3 | RNVC: 2

1 Jan 1967

144967392
F00156539: RNCC: 3 | RNVC: 2
F00156539: RNCC: 5 | RNVC: 9

15 Oct 1997

5120-14-289-4430

5120-14-250-0417
Sheet Metalworking Dolly Block

142500417
M0B318: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-280-1399

5120-14-477-0297
Open End Wrench

144770297
33438929: RNCC: 3 | RNVC: 9
438929: RNCC: 5 | RNVC: 9

18 Jul 1995

5120-14-548-9341
Pliers

145489341
46823692: RNCC: 3 | RNVC: 2

23 Feb 2006

5120-14-236-8770
Spanner Wrench

142368770
0770-78: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-232-3261
Spanner Wrench

142323261
61 360 152: RNCC: 3 | RNVC: 2
13003: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-489-7894
Screwdriver Bit

144897894
ES.125,5T: RNCC: 3 | RNVC: 2
3148510249827: RNCC: 5 | RNVC: 2
0024982: RNCC: 5 | RNVC: 9

19 Aug 1997

5120-14-260-4584
Hand Terminal Crimping Tool

142604584
45099: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-447-3467
Face Spanner Wrench Socket

144473467
16815081: RNCC: 3 | RNVC: 2

15 May 1991

5120-14-220-5131
Cle Speciale

142205131
3130-95-12-075: RNCC: 3 | RNVC: 2
3130S95-12-075: RNCC: 5 | RNVC: 2

1 Jan 1965

5120-14-532-5153
Spanner Wrench

145325153
853-100-299-0: RNCC: 3 | RNVC: 2

6 Nov 2002

5120-14-313-7306
Open End Wrench

143137306
NO PRIMARY REF14-313-7306: RNCC: 3 | RNVC: 2
148200-78: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-485-7328
Bearing And Bushing Inserter And Remover

144857328
332A93-1182-00: RNCC: 3 | RNVC: 2

6 Feb 1997

5120-14-385-3332
Mechanical Puller Attachment

143853332
365A93-3102-20: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-410-2303
Socket Wrench Spanner Attachment

144102303
433-65008-102: RNCC: 3 | RNVC: 2

18 Jun 1986

5120-14-292-9242
Spanner Wrench

142929242
FH146-927: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-489-3458
Hand Tube Swaging Tool Kit

144893458
853-600-301-0: RNCC: 3 | RNVC: 2

9 Jul 1997

5120-14-349-3852
Cle A Rotule

143493852
9970-115-648: RNCC: 3 | RNVC: 2

22 May 1978

5120-14-274-8646
Secteurs Extenseur

142748646
R31674-7-18REP3BIS: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-309-7445
Invent Ens Obt Btp

143097445
341A96-3200-21: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-416-3199
Socket Head Screw Key

144163199
260-7-855M: RNCC: 3 | RNVC: 2
260-7-855M: RNCC: 5 | RNVC: 9

3 Jun 1987

5120-14-429-9792
Pliers

144299792
1-94190: RNCC: 3 | RNVC: 2

22 Feb 1989

5120-14-271-8771
Wrench Extension Handle

142718771
M.200EC: RNCC: 3 | RNVC: 2
3148510325200: RNCC: 5 | RNVC: 2
M200EC: RNCC: 5 | RNVC: 2
0032520: RNCC: 5 | RNVC: 9

1 Jan 1970

5120-14-291-8149
Socket Wrench Socket

142918149
0055500: RNCC: 3 | RNVC: 2
5L32: RNCC: 3 | RNVC: 2
S.32L: RNCC: 5 | RNVC: 2
S32L: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-247-9632
Douille De Cle A Do

142479632
RT20929: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-554-6354
Socket Head Screw Key

145546354
06 SVC 112109-1: RNCC: 3 | RNVC: 2
06SVC112109: RNCC: 5 | RNVC: 9

27 Jul 2007

5120-14-529-8673
Socket Wrench Socket Set

145298673
R.40U: RNCC: 3 | RNVC: 2
3148515121159: RNCC: 5 | RNVC: 2

17 Apr 2002

5120-14-566-0787
Screwdriver Bit

145660787
E-112-F8: RNCC: 3 | RNVC: 2

18 Oct 2010

5120-14-377-2867
Appui De Cric

143772867
C23991000: RNCC: 3 | RNVC: 2

17 May 1982

5120-14-280-1406

5120-14-461-8144
Support Monta Outil

144618144
4306090E316: RNCC: 3 | RNVC: 2
4306090E316: RNCC: 5 | RNVC: 2

29 Mar 1993

5120-14-212-3800

5120-14-411-7058
Extrac Cent Rondell

144117058
229655: RNCC: 3 | RNVC: 2

27 Aug 1986

5120-14-416-7559
Mandrin Presse

144167559
537402: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-273-6792
Mandrin Special

142736792
8810014047: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-423-2902
Screwdriver Bit

144232902
EB6: RNCC: 3 | RNVC: 2
303161: RNCC: 5 | RNVC: 2
91598075: RNCC: 5 | RNVC: 2

14 Apr 1988

5120-14-521-6099
Spanner Wrench

145216099
OUT100: RNCC: 3 | RNVC: 2
SYB1154: RNCC: 5 | RNVC: 2

28 Aug 2000

5120-14-514-9023
Socket Wrench Handle

145149023
3203401: RNCC: 3 | RNVC: 2

23 Jun 1999

5120-14-368-1534
Spanner Wrench

143681534
16380139: RNCC: 3 | RNVC: 2
16380139: RNCC: 5 | RNVC: 9

20 Feb 1981

5120-14-524-4986
Spring Inserter And Remover

145244986
U21813200: RNCC: 3 | RNVC: 2

21 Mar 2001

5120-14-550-5363
Spanner Wrench

145505363
675021: RNCC: 3 | RNVC: 2

22 Jun 2006

5120-14-511-5466
Six Point Tip Screwdriver

145115466
ACZX.30X150: RNCC: 3 | RNVC: 2
13476: RNCC: 5 | RNVC: 2
3148510134765: RNCC: 5 | RNVC: 2
AZXH.30X150: RNCC: 5 | RNVC: 2
0613 255 30: RNCC: 5 | RNVC: 2

24 Dec 1998

5120-14-284-1951

5120-14-284-1919

5120-14-435-0674
Open End Wrench

144350674
853-100-201-0: RNCC: 3 | RNVC: 2

18 Oct 1989

5120-14-249-6790
Extracteur Special

142496790
2-02627: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-340-1310
Hand Blind Riveter

143401310
TT17A: RNCC: 3 | RNVC: 2

18 Jan 1977

5120-14-410-9075
Regle De Compensati

144109075
39086922: RNCC: 3 | RNVC: 2
39086922: RNCC: 5 | RNVC: 9

23 Jul 1986

5120-14-316-8376
Cale De 0 Pour Ipot

143168376
TD739P2: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-282-6669
Cle A Fourche Verin

142826669
C46930: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-317-0556
Corps De Verin Equi

143170556
160-888427: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-214-3141

5120-14-040-7381
Hand Lead Seal Press

140407381
14B: RNCC: 3 | RNVC: 2
0243920X00: RNCC: 5 | RNVC: 2
14BGRENADE: RNCC: 5 | RNVC: 2
J01444-25: RNCC: 5 | RNVC: 2
COP: RNCC: 5 | RNVC: 9
C0P41PIN1001: RNCC: 5 | RNVC: 9
2B: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-242-0986

5120-14-362-2156

5120-14-278-5038

5120-14-476-9414
Boit Reglage Levier

144769414
5001007756: RNCC: 3 | RNVC: 2

12 Jul 1995

5120-14-375-8025
Spanner Wrench

143758025
300A97139: RNCC: 3 | RNVC: 2
91371579: RNCC: 5 | RNVC: 2
300A97139: RNCC: 5 | RNVC: 9
300A97139: RNCC: 5 | RNVC: 9

30 Mar 1982

5120-14-531-8851
Mechanical Puller Step Plate

145318851
T632G3008101: RNCC: 3 | RNVC: 2

25 Sep 2002

5120-14-392-0880
Torque Wrench Adapter

143920880
853-100-105-0: RNCC: 3 | RNVC: 2

21 Mar 1984

Load More Results