What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.

A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Blacksmith's Punch?

A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Mechanical Finger?

A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.

A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Screwdriver And Wrench Assembly?

A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Stakeholder Bench Plate?

A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.

What is a Drill Drift?

A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.

A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Digging Bar?

A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

What is a Valve Spring Lifter?

A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.

What is a Fuse Puller?

A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.

Hand Tools, Nonedged, Nonpowered - France (FR)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by France (FR) - NCB is 14

Page 57 of 110

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by France

51	20	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - France (FR)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 16 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Pipe Vise? 19 Items: A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.
What is a Hand Vise? 25 Items: A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.
What is a Hand Hydraulic Jack? 133 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 153 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 903 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 17 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
Swage,Bottom,Blacksmith's 10 Items
What is a Hand Tube Flaring Tool? 23 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Blacksmith's Punch? 12 Items: A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.
What is a Drain Plug Wrench? 45 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 57 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 16 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 3829 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
Flatter,Blacksmith's 18 Items
Swage,Top,Blacksmith's 12 Items
What is a Pipe Wrench? 110 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 149 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 53 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
Screwdriver,Offset 54 Items
What is a Screwdriver Bit? 707 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Mechanical Finger? 25 Items: A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.
What is a Socket Wrench Socket? 1803 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 1412 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 1641 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 52 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 565 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
Jack,Push-Pull,Screw 30 Items
What is a Hand Tube Bender? 54 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 1106 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 55 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pinch Bar? 19 Items: A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.
What is a Pry Bar? 17 Items: A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.
What is a Wrecking Bar? 15 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 273 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 413 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 32 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 295 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
Face,Hammer,Inserted 25 Items
What is a Hole Sheet Metal Holder? 37 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Screwdriver And Wrench Assembly? 11 Items: A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.
What is a Hand Rivet Set? 121 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Stakeholder Bench Plate? 22 Items: A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.
What is a Drill Drift? 32 Items: A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.
What is a Tack Claw? 15 Items: A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.
Mattock 28 Items
What is a Socket Wrench Handle Bar? 108 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Stake,Sheet Metalworking 50 Items
Riveter,Blind,Hand 76 Items
What is a Hand Shovel? 43 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 98 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 30 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
What is a Digging Bar? 20 Items: A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.
Block,Dolly,Sheet Metalworking 56 Items
What is a Piston Ring Compressor? 34 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Valve Spring Lifter? 29 Items: A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.
What is a Fuse Puller? 20 Items: A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.
What is a Hand Lead Seal Press? 18 Items: A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.
What is a Hand Beading Tool? 91 Items: A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.
What is a Hand Hammer? 502 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
Head,Hand Hammer 81 Items
What is a Lamp Extractor? 76 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Tube Packing Ring Installing Tool? 29 Items: A Tube Packing Ring Installing Tool (INSTALLING TOOL,TUBE PACKING RING) is an item designed to insert packing rings on tubes within tube sheets on condensers and similar heat exchangers. In operation, the packing rings are assembled on the loading pin mandrel and are then transferred from the mandrel on to the tube by means of a tubular sleeve which slides on the mandrel.
What is a Carpenters' Pincers? 18 Items: A Carpenters' Pincers (PINCERS,CARPENTERS') is a plierlike hand tool having two opposing jaws which may have hammerlike backs. One handle has a nail or tack pulling claw, the other is shaped to form a screwdriver. The tool may contain a wire cutter. See also NIPPERS, END CUTTING and PINCERS, FARRIERS'.
What is a Trowel? 33 Items: A Trowel is a tool used for bricklaying, concrete work, plastering, linoleum laying, and masonry work. Excludes CORNER TOOL, CONCRETE.
What is a Hand Abrasive Wheel Dresser? 12 Items: A Hand Abrasive Wheel Dresser (DRESSER,ABRASIVE WHEEL,HAND) is a tool designed to remove glaze from, dress, shape, sharpen, and true solid abrasive wheels. Excludes NIB, DIAMOND, WHEEL DRESSING.
What is a Lamp Cap Extractor? 32 Items: A Lamp Cap Extractor (EXTRACTOR,LAMP CAP) is a tool specifically designed to facilitate the removal of lamp caps from switchboards, panels or indicator lamps.
What is a Rivet Bucking Bar? 51 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 86 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 277 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Woven Cable Grip? 23 Items: A Woven Cable Grip (GRIP,CABLE,WOVEN) is a braided wire device designed to clutch a bare or insulated conductor, cable or wire rope, for holding taut or drawing through conduit.
What is a Screw Thread Insert Extractor? 19 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is an Electron Tube Extractor? 18 Items: An Electron Tube Extractor (EXTRACTOR,ELECTRON TUBE) is a hand tool designed to facilitate the removal of electron tubes from electronic equipment and to avoid burning the fingers. It may be used for installing tubes.
What is a Cross Tip Screwdriver? 362 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 21 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 11 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 37 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Tool Handle Wedge? 10 Items: A Tool Handle Wedge (WEDGE,TOOL HANDLE) is excludes WEDGE, WOOD.
What is a Marlinespike? 16 Items: A Marlinespike is a metal hand tool made in the shape of a tapered pin. One end is pointed and the opposite end may be headed. The body may contain an eye for a lanyard sling, or be grooved lengthwise. Excludes CABLE PICK and FID.
What is an Aligning Punch? 272 Items: An Aligning Punch (PUNCH,ALIGNING) is a round, square, hexagonal or octagonal bodied hand tool, having a round tapered section 6-1/2 inches (165.1 mm) or more in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, DRIFT and DRIFTPIN.
What is a Drift Punch? 25 Items: A Drift Punch (PUNCH,DRIFT) is a round, square, hexagonal, or octagonal bodied hand tool, having a round tapered section 4 to 6 inches (101.6 mm to 152.4 mm) inclusive in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, ALIGNING; and DRIFTPIN.
What is a Putty Knife? 36 Items: A Putty Knife (KNIFE,PUTTY) is a hand tool with a nonedged blade fixed to a handle for laying on and smoothing putty and the like.
What is a Socket Wrench Adapter-Extension? 40 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 30 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 184 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Socket Wrench Ratchet Attachment? 47 Items: A Socket Wrench Ratchet Attachment (RATCHET ATTACHMENT,SOCKET WRENCH) is a connection for socket wrenches and handles. Consists of a ratcheting mechanism with an internal drive on one end and an external drive on the opposite end of the same size. The item is designed to permit continuous rotation of the socket in one direction without removing the socket or handle and without a complete rotation of the handle.
What is a Wrench Extension Handle? 81 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Socket Wrench Crowfoot Attachment? 155 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 33 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 43 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 48 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 2394 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 372 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 300 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 661 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 32 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand-Operated Grommet And Eyelet Press? 12 Items: A Hand-Operated Grommet And Eyelet Press (PRESS,GROMMET AND EYELET,HAND-OPERATED) is a device which punches or pierces holes and in addition fastens or sets eyelets and grommets in cloth, paper and similar material. May be used for fastening or setting rivets, lacing hooks and snaps in cloth, paper and similar material. It is hand operated by lever or screw action. See also PUNCH, EYELET, PLIER TYPE and PRESS, GROMMET AND EYELET, FOOT OPERATED.
What is a Claw Bar? 19 Items: A Claw Bar (BAR,CLAW) is before using, refer to Reference Drawing Group AG.
What is a Shock Type Wheel Stud Nut Wrench? 11 Items: A Shock Type Wheel Stud Nut Wrench (WRENCH,WHEEL STUD NUT,SHOCK TYPE) is a manually operated item designed to remove wheel stud nuts. In operation the inner nut is turned by a socket attached to a shaft on which is a loose swinging weighted handle. The weighted handle may be swung quickly to provide an impact force against the socket to loosen the seized or jammed nuts. The outer nut is held stationary by a separate hexagonal holding wrench.
What is a Drift Pin Set? 30 Items: A Drift Pin Set is a group of DRIFTPIN having different characteristics.
What is a Tire Iron? 25 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 115 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Blacksmith's Vise? 14 Items: A Blacksmith's Vise (VISE,BLACKSMITH'S) is a clamping device consisting of a mounting plate, one stationary and one manual screw actuated jaw and a supporting member extending downward from the stationary jaw to the floor. Designed to be mounted on a bench, table or the like. May include pipe holding jaws.
What is a Machinist's Vise? 64 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Clamp Base Bench Vise? 10 Items: A Clamp Base Bench Vise (VISE,BENCH,CLAMP BASE) is a clamping device consisting of a base, one stationary and one manual screw actuated jaw, and one or more guide bars or rods. Designed with an integral clamp for attaching to a bench, table, or the like. Does not include pipe holding jaws.
What is a Fixed Open End Wrench Set? 86 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Nail Set? 11 Items: A Nail Set is a round knurled, square, hexagonal or octagonal bodied hand tool having a round tapered section terminating in a cupped point. It is designed to set brad head nails below the surface by striking it a hammerlike blow. See also PUNCH, DRIVE PIN.
What is a Socket Wrench Set? 202 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is an Open End Box Wrench Set? 10 Items: An Open End Box Wrench Set (WRENCH SET,OPEN END BOX) is a group of WRENCH, OPEN END BOX having different characteristics.
What is a Combination Box And Open End Wrench Set? 72 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Box Wrench Set? 36 Items: A Box Wrench Set (WRENCH SET,BOX) is a group of box wrenches having different characteristics. It may include a HANDLE, EXTENSION WRENCH. See also WRENCH SET, COMBINATION, BOX AND OPEN END.
What is a Hot Line Stick? 26 Items: A Hot Line Stick is a hand tool consisting of a straight, round stick (pole) made of a suitable nonconductive material with a tool fixed to one end. The other end may be plain or have a butt mounting device fixed to it. Various types of attachments (hooks, rings, and bands) may be fixed to the body. It is designed for use in the repair and maintenance of live high voltage aerial lines. Excludes hot line sticks without heads.
Handle,Mattock-Pick 15 Items
What is a Wrench Kit? 73 Items: A Wrench Kit is an assortment of various types and sizes of wrenches such as SOCKET, SOCKET WRENCH; WRENCH, OPEN END, FIXED; WRENCH, BOX and the like. It may include adapter(s), ratchet(s) and the like. See also WRENCH SET (as modified.
What is a Brad Awl? 15 Items: A Brad Awl (AWL,BRAD) is a small, pointed tool used by shoemakers, saddlers, cabinetmakers, and the like for piercing small holes in wood, leather, and similar materials, and consists of a handle with a ferrule and a blade. The blade is round, terminating in a beveled, sharp straight edge and has a shank which passes through the center of the handle.
What is a Scratch Awl? 20 Items: A Scratch Awl (AWL,SCRATCH) is an item whose nominal length of blade is less than 4 inches (101.6 millimeters) and is provided with a nondetachable handle.
What is a Screw Extractor Set? 10 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 102 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
Jack,Scissors,Hand 26 Items
What is a Piston Ring Expander? 23 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
Mallet,Plastic 62 Items
Mallet,Rubber 10 Items
What is a Wood Mallet? 37 Items: A Wood Mallet (MALLET,WOOD) is excludes MALLET, CALKING; MALLET, HAWSING and MALLET, SERVING.
What is a Rack Bar Jack? 30 Items: A Rack Bar Jack (JACK,RACK BAR) is excludes JACK, BUMPER and JACK, REEL, HAND.
What is a Pneumatic Tire Valve Core Inserter And Remover? 14 Items: A Pneumatic Tire Valve Core Inserter And Remover (INSERTER AND REMOVER,PNEUMATIC TIRE VALVE CORE) is a bar of steel having a small cylindrical slotted end for removing or installing a valve core in a valve stem by a screwing motion. See also REPAIR TOOL, PNEUMATIC TIRE VALVE.
What is a Hand Tube Swaging Tool Kit? 20 Items: A Hand Tube Swaging Tool Kit (SWAGING TOOL KIT,TUBE,HAND) is a hand-operated noncutting tool consisting of one or more PUNCH, TUBE SWAGING, HAND and a tube flaring bar.
What is a Hand Tube Flaring Punch? 11 Items: A Hand Tube Flaring Punch (PUNCH,TUBE FLARING,HAND) is a noncutting tool having a shaped end or section designed to flare the ends of tubes. One type is designed to flare the ends of tubes against a tube sheet, and another to flare tube ends to mate with tube fittings. Includes punch components of FLARING TOOL, TUBE, HAND.
What is a Hose Strap Band Clamping Tool? 26 Items: A Hose Strap Band Clamping Tool (CLAMPING TOOL,STRAP BAND,HOSE) is an item designed to tension and lock metal straps around a rubber hose, and the like. It is also used to clamp and hold fittings therein.
What is a Mechanical Puller? 3073 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 470 Items
What is a Slip Joint Pliers? 84 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Brake Repair Pliers? 14 Items: A Brake Repair Pliers (PLIERS,BRAKE REPAIR) is a tool having jaws designed for use in brake repair operations, such as removing and replacing items such as keys, springs, and the like. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 226 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 12 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 81 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 56 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 15 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 11 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 29 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Cross Tip Screwdriver Set? 14 Items: A Cross Tip Screwdriver Set (SCREWDRIVER SET,CROSS TIP) is a group of SCREWDRIVER, CROSS TIP having different characteristics.
What is a Spanner Wrench Set? 18 Items: A Spanner Wrench Set (WRENCH SET,SPANNER) is a group of items under WRENCH, SPANNER having different characteristics.
What is a Drive Pin Punch Set? 31 Items: A Drive Pin Punch Set (PUNCH SET,DRIVE PIN) is a group of PUNCH, DRIVE PIN having different characteristics.
What is an Aligning Punch Set? 13 Items: An Aligning Punch Set (PUNCH SET,ALIGNING) is a group of PUNCH, ALIGNING having different characteristics. See also DRIFTPIN SET.
What is a Slugging Type Box Wrench Socket? 16 Items: A Slugging Type Box Wrench Socket (SOCKET,SLUGGING TYPE BOX WRENCH) is an item having a hexagonal external drive at one end, made to fit into the internal hexagonal or 12-point opening of a slugging type box wrench. The opposite end has a single-broached hexagonal opening of the same size as the external drive. The item is designed with extra thick walls to withstand the impact of sledge blows on the driving wrench.
What is a Mechanical Puller Step Plate? 44 Items: A Mechanical Puller Step Plate (STEP PLATE,MECHANICAL PULLER) is a circular disk, flanged to provide a shoulder, and designed to provide a base for the screw point of a PULLER, MECHANICAL when pulling externally mounted bearings, gears, and the like from hollow shafts or housings. It has a concentric, countersunk hole to accommodate the puller screw point.
What is a Solid Center Punch? 79 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Cable Type Ratchet Lever Puller? 20 Items: A Cable Type Ratchet Lever Puller (PULLER,RATCHET LEVER,CABLE TYPE) is an item consisting of a metal frame and ratchet lever reel to which is attached one end of a flexible cable (wire rope). The cable feeds through the fast eye in the metal frame, and may be reeved through a slip hook tackle hook. See also BINDER, LOAD; HOIST, WIRE ROPE and STRETCHER, WIRE.
What is an Electronic Equipment Tuning Wand? 18 Items: An Electronic Equipment Tuning Wand (TUNING WAND,ELECTRONIC EQUIPMENT) is a hand-held rod used in determining the adjustment of the windings of a radio frequency coil. It is made of insulating material with iron on one end and brass on the other end. By inserting the iron end in the coil, the inductance is increased and by inserting the brass end, the inductance is decreased.
What is a Combination Open End And Spanner Wrench? 14 Items: A Combination Open End And Spanner Wrench (WRENCH,OPEN END AND SPANNER,COMBINATION) is a tool having open end wrench characteristics at one end and spanner wrench features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s) at the other end.
What is a Detent Handling Tool? 187 Items: A Detent Handling Tool (HANDLING TOOL,DETENT) is a specially designed handling tool consisting of a rigid bar with a T-handle on one end. The other end is equipped with threads designed to mate the threads of a detent to facilitate inserting or extracting.
What is a Hand Material Handling Hook? 23 Items: A Hand Material Handling Hook (HOOK,MATERIAL HANDLING,HAND) is a hook whose curved end conforms to Style AP1, AP2, AP3 or AP4 of Reference Drawing Group AP. Excludes HOOK, MANHOLE COVER, HAND; HOOK, WIRE BREAKING, HAND; HOOK, ROCK CRUSHER FEEDING, HAND; HOOK, STRAINER REMOVING, HAND and HOOKS, BAG HANDLING, HAND.
What is a Magnetic Retrieving Tool? 11 Items: A Magnetic Retrieving Tool (RETRIEVING TOOL,MAGNETIC) is a hand-operated magnetic device used to locate and pick up metallic articles, such as bolts, nuts, pins, washers, and the like, in confined spaces. It may be rigid, flexible or adjustable. Excludes FINGER, MECHANICAL.
What is a Mechanical Puller Adapter? 78 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Combination Box And Open End Box Wrench? 13 Items: A Combination Box And Open End Box Wrench (WRENCH,BOX AND OPEN END BOX,COMBINATION) is a double end wrench, box and open end box, primarily designed for removing or replacing tube fittings. The opening in the open end box may be machined at an angle from the longitudinal center line of the wrench.
What is a Screw Thread Insert Inserter? 136 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Flat Tip Screwdriver Set? 48 Items: A Flat Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP) is a group of SCREWDRIVER, FLAT TIP having different characteristics.
What is a Terminal Crimping Tool Contact Positioner? 89 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 16 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is an Adjustable Wrench? 138 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 239 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 75 Items
Handle,Shovel 10 Items
What is a Socket Wrench Spanner Attachment? 88 Items: A Socket Wrench Spanner Attachment (SPANNER ATTACHMENT,SOCKET WRENCH) is an item having an adjustable or fixed span with pin, hook, or key type end that is used to fit and turn various size retaining rings, cover plates, plugs, couplings, and like parts. Usually designed to be driven by a male driver.
What is a Retaining Ring Installation Tool? 44 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Tacker? 16 Items: A Tacker is a hand-operated, hammerlike or gunlike item without a clincher, used to drive preformed connecting elements like pins, nails or staples through one object or piece of material into another. Excludes STAPLER (as modified).
What is a Bearing And Bushing Inserter? 290 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 207 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 939 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 14 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 93 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 161 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 94 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 141 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 53 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Six Point Tip Screwdriver? 155 Items: A Six Point Tip Screwdriver (SCREWDRIVER,SIX POINT TIP) is a manual screwdriver having a single nonremoveable blade having a tip with six rounded points.
What is a Seal Inserter And Remover? 147 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 478 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is a Preformed Packing Inserter And Remover? 34 Items: A Preformed Packing Inserter And Remover (INSERTER AND REMOVER,PREFORMED PACKING) is a hand tool designed to install and remove a PACKING, PREFORMED.
What is a Pin Remover? 34 Items: A Pin Remover (REMOVER,PIN) is a hand tool designed to facilitate the removal of a pin from a hole.
What is a Pin Inserter And Remover? 13 Items: A Pin Inserter And Remover (INSERTER AND REMOVER,PIN) is a rodlike tool designed to facilitate the insertion and removal of a pin from a hole.
What is an Electrical Contact Inserter And Remover? 37 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Piston Inserter? 40 Items: A Piston Inserter (INSERTER,PISTON) is a tool designed to permit installation of a piston or piston assembly without damaging the packings or piston.
What is a Spring Inserter And Remover? 85 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 13 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Stud Inserter? 22 Items: A Stud Inserter (INSERTER,STUD) is a device designed to drive in studs. It does not have any facilities for removing or extracting studs. See also INSERTER AND REMOVER, STUD.
What is a Stud Inserter And Remover? 17 Items: A Stud Inserter And Remover (INSERTER AND REMOVER,STUD) is a group of items designed to extract and to drive studs. It may include collets, guides, housings, holders and the like. See also REMOVER SET, STUD and INSERTER, STUD.
What is a Gear Inserter? 54 Items: A Gear Inserter (INSERTER,GEAR) is a hand tool designed to install various gears onto a gearshaft. It may be operated by a pushing or a striking force.
What is a Crimping Tool Die? 73 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is an Electrical Connector Inserter? 45 Items: An Electrical Connector Inserter (INSERTER,ELECTRICAL CONNECTOR) is a hand tool designed to hold an electrical connector, and to assist in the positioning and installation of the connector on a cover, panel or the like.
What is a Float? 12 Items: A Float is a tool used for concrete, plastering and grouting work.
What is a Mechanical Puller Set? 19 Items: A Mechanical Puller Set (PULLER SET,MECHANICAL) is two or more separate PULLER, MECHANICAL of different fixed sizes.
What is a Lifting Pneumatic Bag? 11 Items: A Lifting Pneumatic Bag (PNEUMATIC BAG,LIFTING) is a device made of flexible material designed to lift another item by being placed under the item and being inflated with air or some other gas. It will have a means of being connected to an air or gas source and may include a connector hose, a control valve and/or a pressure regulator.
What is a Cable Tie Installation Tool? 22 Items: A Cable Tie Installation Tool (INSTALLATION TOOL,CABLE TIE) is a lightweight, hand-held, hand-operated tool designed to fasten cable ties, straps and the like. Cable tie is inserted into the nose of the tool flush to the cable tie head. Trigger handle tightens cable tie and cuts off any excess. These installation tools are available in a variety of sizes depending on their intended use with miniature, intermediate, standard, heavy or extra heavy cross section ties.
What is a Bearing Staking Installation Tool? 159 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
Wrench Set,Ratchet 15 Items
What is a Sealant Dispenser? 26 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Retaining Ring Pliers Set? 10 Items: A Retaining Ring Pliers Set (PLIERS SET,RETAINING RING) is a group of PLIERS, RETAINING RING having different characteristics.
What is a Hand Armament Subsystem Carrier? 52 Items: A Hand Armament Subsystem Carrier (CARRIER,ARMAMENT SUBSYSTEM,HAND) is a metallic item with a clamp device and/or space for depositing articles. It is used for transporting weapon parts during maintanence and/or repair work, such as gun barrel, automatic loader, breechblock and the like.
What is a Ring Retaining Pliers Tip Set? 13 Items: A Ring Retaining Pliers Tip Set (TIP SET,PLIERS,RING RETAINING) is a collection of removable metallic tips in matched pairs used to provide various size capablities to PLIERS, RING RETAINING which permits the removal and installation of internal and external retaining rings.
What is a Plug Electrical Connector Extractor? 45 Items: A Plug Electrical Connector Extractor (EXTRACTOR,ELECTRICAL CONNECTOR,PLUG) is a hand tool designed to disassemble CONNECTOR, PLUG, ELECTRICAL from a CONNECTOR, RECEPTACLE, ELECTRICAL.
What is a Torque Wrench Adapter Set? 10 Items: A Torque Wrench Adapter Set (ADAPTER SET,TORQUE WRENCH) is tWO or more ADAPTER, TORQUE WRENCH of different sizes.
What is an Electronic Component Inserter And Remover? 79 Items: An Electronic Component Inserter And Remover (INSERTER AND REMOVER,ELECTRONIC COMPONENT) is an item which can insert or remove an electronic component package such as MICROCIRCUIT; RESISTOR, NETWORK (as modified); and the like from its mounting position or socket. Excludes INSERTER AND REMOVER, ELECTRICAL CONTACT; REMOVER, ELECTRICAL CONTACT; EXTRACTOR, ELECTRICAL CARD; EXTRACTOR, ELECTRONIC CRYSTAL UNIT; EXTRACTOR, ELECTRON TUBE.
What is an Impact Type Bit Set And Handle Screwdriver? 14 Items: An Impact Type Bit Set And Handle Screwdriver (SCREWDRIVER,BIT SET AND HANDLE,IMPACT TYPE) is an item consisting of a set of screwdriver bits and a impact driver to accommodate the bits of various types and characteristics. It is designed to transmit a strong rotating movement by the impact of a hammer blowed on the impact driver. It is used to loosen rusted or seized screws. Excludes SCREWDRIVER, BIT SET AND HANDLE.
What is a Hand Vise Jaw? 19 Items: A Hand Vise Jaw (JAW,VISE,HAND) is an item consisting of two opposing parts of a VISE, HAND. The item is moveable and able to open and close. It can hold, grasp or clamp work.
What is a Screwdriver Handle? 28 Items: A Screwdriver Handle (HANDLE,SCREWDRIVER) is an item used to accommodate various types of BIT, SCREWDRIVER. It is designed to rotate a bit that is used for installing or removing screws.
What is a Wire Twister Pliers? 25 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 284 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is a Mechanical Puller Body? 45 Items: A Mechanical Puller Body (BODY,PULLER,MECHANICAL) is an item designed to support and enclose the internal parts of a PULLER,MECHANICAL.
What is a Flat Tip And Cross Tip Screwdriver Set? 39 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is a Socket Wrench Screwdriver Attachment Set? 22 Items: A Socket Wrench Screwdriver Attachment Set (SCREWDRIVER ATTACHMENT SET,SOCKET WRENCH) is a set of screwdriver attachment, socket wrench of different sizes. Items consist of a female square drive on one end to attach to a handle, socket wrench and various screwdriver tip configurations on the opposite end. Excludes SCREWDRIVER ATTACHMENT,SOCKET WRENCH
What is an Oil Filter Wrench? 44 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 430 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Communications Equipment Spring Adjuster? 13 Items: A Communications Equipment Spring Adjuster (ADJUSTER,SPRING,COMMUNICATIONS EQUIPMENT) is a single or double end tool, equipped with slot(s) of various dimensions or with cylindrical rod(s), used for adjusting the springs or spring tensioned parts of electronic equipment.
What is a Rotating Members Aligning Tool? 32 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
What is a Final Drive Assembly Alignment Pin? 41 Items: A Final Drive Assembly Alignment Pin (ALIGNMENT PIN,FINAL DRIVE ASSEMBLY) is a special designed pin used in the assembling of the final drive.
Arm,Handling Tool 77 Items
What is a Splicing Sleeve Compressing Tool? 23 Items: A Splicing Sleeve Compressing Tool (COMPRESSING TOOL,SPLICING SLEEVE) is a hand tool having hinged leverage handles similar to a CUTTER, BOLT or pliers, designed to compress a splicing sleeve when joining the ends of two conductors, or when forming an eye splice in the end of a wire rope. Excludes CRIMPING TOOL, TERMINAL, HAND.
What is a Hand Screw Jack Extension? 14 Items: A Hand Screw Jack Extension (EXTENSION,HAND SCREW JACK) is a length of externally threaded rigid shafting which is the adjustable section of a JACK, SCREW, HAND.
What is a Mechanical Puller Gear Adapter? 21 Items: A Mechanical Puller Gear Adapter (GEAR ADAPTER,PULLER,MECHANICAL) is an adapter that adapts a PULLER,MECHANICAL, to pull a certain gear.
Handle,Hydraulic Jack 18 Items
What is a Female Electrical Contact Resizing Tool? 11 Items: A Female Electrical Contact Resizing Tool (RESIZING TOOL,FEMALE ELECTRICAL CONTACT) is a tool designed to shape to a specific size, female contacts such as those used on electrical connectors, tube sockets, crystal sockets, and pin jacks.
What is a Screwdriver And Socket Wrench Combination? 13 Items: A Screwdriver And Socket Wrench Combination is a hand-tool formed into an integral unit with a socket wrench at one end and a screwdriver bit at the other end. See also SCREWDRIVER AND WRENCH ASSEMBLY.
What is a Hand Hose Fitting Swaging Tool Kit? 11 Items: A Hand Hose Fitting Swaging Tool Kit (SWAGING TOOL KIT,HOSE FITTING,HAND) is a device, hydraulically actuated by hand or power operated pump, consisting of face plate, adapter plate, finger cages, fingers, ram, bushing, and expanding mandrels combined on a single base in various functional arrangements. It is used for swaging the outside diameter of hose assembly fittings, expanding the inside diameter of hose assemblies, and securing the fabrication of hose assemblies. Included are a hand or power operated pump, lubricant, cases, and trays.
What is a Catch Lever Tool? 12 Items: A Catch Lever Tool (LEVER TOOL,CATCH) is a specially designed hand tool which engages the opening and closing lever of a CATCH (as modified) for ease of operation. It is constructed of thin rigid material, usually flat, and one end has an engaging tongue.
What is a Manual Impact Wrench? 11 Items: A Manual Impact Wrench (WRENCH,IMPACT,MANUAL) is a manually operated handheld tool consisting of spring-loaded handle and a power-impact head which delivers a torsional impact from either continuous movement of the handle in one direction, or by a reciprocating action. It is used in tightening and loosening fasteners, such as bolts, nuts, and the like. The item may include sockets, extensions and offset fittings, nut runners, and the like.
What is a Drift? 63 Items: A Drift is an item consisting of a tubular body fitted with replaceable tips. It is designed to insert or remove mechanical components where space is restricted.
What is a Nutdriver? 46 Items: A Nutdriver is a non-powered hand tool with a screwdriver style handle, shaft and formed female hex or square socket at driving end.
What is a Locking Device Removal Tool? 12 Items: A Locking Device Removal Tool (REMOVAL TOOL,LOCKING DEVICE) is a hand tool designed to facilitate the removal of a WASHER, KEY and a LOCKING PLATE, NUT AND BOLT.
What is a Hydraulic Fitting Crimping Tool Head? 26 Items: A Hydraulic Fitting Crimping Tool Head (HEAD,CRIMPING TOOL,HYDRAULIC FITTING) is a component of a crimping tool used to compress fittings on fluid tubes. It consists of a U-shape item, in which, are mounted different sizes of DIE, CRIMPING TOOL for tubes of various diameters.
What is a Torque Screwdriver? 11 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.
What is a Special Purpose Combination Wrench? 13 Items: A Special Purpose Combination Wrench (WRENCH,COMBINATION,SPECIAL PURPOSE) is a tool having a combination of ends and facets. The ends may have open end, box or spanner characteristics. The sides may have features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s). Designed to fit specific items, not sized as standard or metric.
What is a Screwdriver Bit Holder? 56 Items: A Screwdriver Bit Holder (HOLDER,SCREWDRIVER BIT) is an attachment with a socket end for accepting male hexagon shank insert bits and a drive end for adapting to a portable power or hand tool.
What is a Telescoping Pole? 16 Items: A Telescoping Pole (POLE,TELESCOPING) is an item which is designed to be extended or compressed by the sliding of overlapping sections. This item may or may not be able to accommodate an extension.

Stock Items From Supply Class 5120 Page 57 of 110

5120-14-443-7964
Face Spanner Wrench Socket

144437964
OU19043: RNCC: 3 | RNVC: 2
0U19043: RNCC: 5 | RNVC: 2

5 Dec 1990

5120-14-539-3141
Spanner Wrench

145393141
T651G3001222: RNCC: 3 | RNVC: 2

22 Dec 2003

5120-14-505-9877
Bearing And Bushing Inserter And Remover

145059877
K117167A: RNCC: 3 | RNVC: 2

3 Apr 1998

5120-14-297-8800
Spanner Wrench

142978800
000MA0595REP2: RNCC: 3 | RNVC: 2
000MA595REP2: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-263-8208

5120-14-485-5891
Cle De Blocage

144855891
PL1NA003AA012635: RNCC: 3 | RNVC: 2

30 Jan 1997

5120-14-575-3313
Pliers

145753313
82025572000: RNCC: 3 | RNVC: 1

27 Mar 2013

5120-14-576-2963
Inserter And Remove

145762963
8811316002: RNCC: 3 | RNVC: 2

11 Jun 2013

5120-14-320-2582

5120-14-258-5036
Arrache-Piquet

142585036
164: RNCC: 3 | RNVC: 2

1 Jan 1969

5120-14-367-9723
Socket Wrench Socket

143679723
RT21335: RNCC: 3 | RNVC: 2

19 Jan 1981

5120-14-214-6077
Spanner Wrench

142146077
0UT6: RNCC: 3 | RNVC: 2
OUT6: RNCC: 5 | RNVC: 2
91486514: RNCC: 5 | RNVC: 2

1 Jan 1965

5120-14-206-9542
Poincon Pour Croche

142069542
P0INC0NP0URCR0CHET: RNCC: 3 | RNVC: 2

1 Jan 1964

5120-14-368-1971
Spanner Wrench

143681971
0408-52013: RNCC: 3 | RNVC: 2

20 Feb 1981

5120-14-370-5800

5120-14-484-7249
Pliers

144847249
424.MT: RNCC: 3 | RNVC: 2
3148511758304: RNCC: 5 | RNVC: 2
SYQ1791: RNCC: 5 | RNVC: 2
0175830: RNCC: 5 | RNVC: 9

5 Dec 1996

5120-14-384-1981
Faux Mors

143841981
26-281-3: RNCC: 3 | RNVC: 2

4 May 1983

5120-14-545-5996
Six Point Tip Screwdriver

145455996
61034492AA: RNCC: 3 | RNVC: 2
61034492: RNCC: 5 | RNVC: 1

25 Apr 2005

5120-14-395-0566
Spanner Wrench

143950566
8814108000: RNCC: 3 | RNVC: 2

2 Oct 1984

5120-14-438-7782
Bearing And Bushing Inserter And Remover

144387782
330A93-3412-21: RNCC: 3 | RNVC: 2

4 Apr 1990

5120-14-454-3154
Etau Support

144543154
MFG310-41: RNCC: 3 | RNVC: 2

26 Mar 1992

5120-14-371-4268
Spanner Wrench

143714268
6254-57051: RNCC: 3 | RNVC: 2

5 Aug 1981

5120-14-428-2785
Electrical Connector Inserter

144282785
15A9830: RNCC: 3 | RNVC: 2

8 Dec 1988

5120-14-575-0802
Mechanical Puller S

145750802
8813607004: RNCC: 3 | RNVC: 2

12 Mar 2013

5120-14-221-2298
Cle A Douille

142212298
62478: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-379-4611
Electrical Card Extractor

143794611
9Q29T: RNCC: 3 | RNVC: 2

1 Oct 1982

5120-14-482-3751
Screwdriver Bit

144823751
001194D: RNCC: 3 | RNVC: 2

11 Jul 1996

5120-14-519-7801
Six Point Tip Screwdriver Set

145197801
AZX.JS6: RNCC: 3 | RNVC: 2
0613 255 90: RNCC: 5 | RNVC: 2
0613 256 90: RNCC: 5 | RNVC: 2

5 Apr 2000

5120-14-284-5212
Socket Head Screw Key

142845212
T34BBC14A: RNCC: 3 | RNVC: 2
T0556BBC14A: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-551-7216
Hand Armament Subsystem Carrier

145517216
10669867001: RNCC: 3 | RNVC: 2

18 Oct 2006

5120-14-542-7846
Electrical Contact Remover

145427846
332 13: RNCC: 3 | RNVC: 2
33213: RNCC: 5 | RNVC: 2
AA000842: RNCC: 6 | RNVC: 9

14 Aug 2004

5120-14-532-2429
Adjustable Wrench

145322429
54G8: RNCC: 3 | RNVC: 2

23 Oct 2002

5120-14-533-4951
Torque Wrench Adapter

145334951
47067685: RNCC: 3 | RNVC: 2

5 Feb 2003

5120-14-530-4451
Screwdriver Bit

145304451
8040570X00: RNCC: 3 | RNVC: 2

12 Jun 2002

5120-14-384-6304
Electrical Card Extractor

143846304
16928955: RNCC: 3 | RNVC: 2
16928955: RNCC: 5 | RNVC: 9

2 Jun 1983

5120-14-412-2351
Bearing And Bushing Inserter

144122351
8814222000: RNCC: 3 | RNVC: 2

8 Oct 1986

5120-14-261-0367
Spanner Wrench

142610367
0331-78: RNCC: 3 | RNVC: 2
RA331: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-491-9171
Herminette

144919171
103: RNCC: 3 | RNVC: 2
F300 0T 006 0586: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-338-4741

5120-14-379-4430
Face Spanner Wrench Socket

143794430
B51830H: RNCC: 3 | RNVC: 2

1 Oct 1982

5120-14-224-8546
Socket Head Screw Key

142248546
044BBC4BBF4PL1/2BREP12: RNCC: 3 | RNVC: 2
044BBC4BBF4AREP12: RNCC: 5 | RNVC: 2

1 Jan 1966

5120-14-289-9999

5120-14-438-5012
Face Spanner Wrench Socket

144385012
37AM024: RNCC: 3 | RNVC: 2
85-694-0552: RNCC: 6 | RNVC: 9

21 Mar 1990

5120-14-370-8999
Spanner Wrench

143708999
6801R32-1032-20: RNCC: 3 | RNVC: 2
6801366A32-1032-20: RNCC: 5 | RNVC: 2

5 Jun 1981

5120-14-507-6028
Flat Tip Screwdriver

145076028
NO PRIMARY REF14-507-6028: RNCC: 3 | RNVC: 2
AH.8X175: RNCC: 5 | RNVC: 2
0005924: RNCC: 5 | RNVC: 9

27 Jul 1998

5120-14-357-7637
Cross Tip Screwdriver

143577637
07603-0050100: RNCC: 3 | RNVC: 2
07603-0050100: RNCC: 5 | RNVC: 2

20 Jul 1979

5120-14-359-9697
Spanner Wrench

143599697
F46524: RNCC: 3 | RNVC: 2

31 Oct 1979

5120-14-439-1369
Electrical Connector Inserter

144391369
M4Z5101912301: RNCC: 3 | RNVC: 2

25 Apr 1990

5120-14-323-4750
Face Spanner Wrench Socket

143234750
62555: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-269-4795
Mechanical Puller Attachment

142694795
204207: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-292-3215

5120-14-323-2140

5120-14-226-3721

5120-14-530-2064
Cross Tip Screwdriver

145302064
ACPB.1X40: RNCC: 3 | RNVC: 2

22 May 2002

5120-14-237-6854

5120-14-220-7922
Open End Wrench

142207922
RACC19: RNCC: 3 | RNVC: 2
RACC19: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-532-2425
Flat Tip Screwdriver

145322425
274A7: RNCC: 3 | RNVC: 2

23 Oct 2002

5120-14-280-1394

5120-14-304-3130
Cone De Guidage

143043130
C46915: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-465-3706
Screw Push-Pull Jack

144653706
96114182: RNCC: 3 | RNVC: 9

22 Sep 1993

5120-14-495-2748
Cle

144952748
6F300 0T 014 5371: RNCC: 3 | RNVC: 2
F300 0T 018 9297: RNCC: 6 | RNVC: 9

15 Oct 1997

5120-14-398-0509
Socket Head Screw Key

143980509
0056123109: RNCC: 3 | RNVC: 2

31 Jan 1985

5120-14-409-0572
Traverse

144090572
72511: RNCC: 3 | RNVC: 2

16 Apr 1986

5120-14-214-4143
Cle A Ergots Specia

142144143
09-1127: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-334-7094
Electrical Card Extractor

143347094
222EN0201: RNCC: 3 | RNVC: 2
222EN0201: RNCC: 5 | RNVC: 9

1 Jun 1976

5120-14-293-7715
Manual Control Lever

142937715
13646060Z: RNCC: 3 | RNVC: 2
64606: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-375-8027
Spanner Wrench

143758027
300A97146: RNCC: 3 | RNVC: 2
91371581: RNCC: 5 | RNVC: 2
300A97146: RNCC: 5 | RNVC: 2
300A97146: RNCC: 5 | RNVC: 9
300A97146: RNCC: 5 | RNVC: 9

30 Mar 1982

5120-14-358-4585
Spanner Wrench

143584585
2985-78: RNCC: 3 | RNVC: 9

13 Aug 1979

5120-14-283-2497

5120-14-392-0847
Torque Wrench Multiplier

143920847
853-200-492-0: RNCC: 3 | RNVC: 2

21 Mar 1984

5120-14-385-3146
Elemen Positionneur

143853146
360A93-3309-20: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-433-6327
Socket Head Screw Key

144336327
6269-59025: RNCC: 3 | RNVC: 2

2 Aug 1989

5120-14-567-9263
Wiring Folding Tool

145679263
260661381: RNCC: 3 | RNVC: 2

26 Apr 2011

5120-14-450-0774
Outil Extrac Contac

144500774
1272: RNCC: 3 | RNVC: 2

23 Sep 1991

5120-14-380-8925
Hand Terminal Crimping Tool

143808925
90090-2: RNCC: 3 | RNVC: 2

14 Dec 1982

5120-14-285-6268

5120-14-530-2066
Screwdriver Bit Set And Handle

145302066
AEP.00X35: RNCC: 3 | RNVC: 2
3148510049427: RNCC: 5 | RNVC: 2
MO099167: RNCC: 6 | RNVC: 9

22 May 2002

5120-14-530-2070
Flat Tip And Cross Tip Screwdriver Set

145302070
MOD.AZ1PB: RNCC: 3 | RNVC: 2

22 May 2002

5120-14-450-3542
Socket Head Screw Key

144503542
0123812: RNCC: 3 | RNVC: 2
83.S4: RNCC: 5 | RNVC: 2

1 Oct 1991

5120-14-424-2415
Open End Wrench

144242415
809885: RNCC: 3 | RNVC: 2
91620336: RNCC: 5 | RNVC: 2

19 May 1988

5120-14-526-2847
Retaining Ring Pliers

145262847
3148511394458: RNCC: 3 | RNVC: 2
167E.13: RNCC: 5 | RNVC: 2

16 Jul 2001

5120-14-459-1646
Seal Inserter And Remover

144591646
45215150: RNCC: 3 | RNVC: 2
45215150: RNCC: 5 | RNVC: 9

19 Nov 1992

5120-14-447-3393
Bearing And Bushing Inserter And Remover

144473393
F117159: RNCC: 3 | RNVC: 2
45056025: RNCC: 5 | RNVC: 2

15 May 1991

5120-14-455-2586
Sheet Holder Forceps

144552586
RT2: RNCC: 3 | RNVC: 9

20 May 1992

5120-14-318-6206
Spanner Wrench

143186206
C46344: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-461-5576
Open End Wrench

144615576
9325 EATSEA/MAT: RNCC: 3 | RNVC: 2

17 Mar 1993

5120-14-248-7496

5120-14-463-7683
App.Assembl.Final

144637683
428405W: RNCC: 3 | RNVC: 2
M53621: RNCC: 5 | RNVC: 2

29 Jun 1993

5120-14-420-1883
Faux Clapet

144201883
34781: RNCC: 3 | RNVC: 2

24 Nov 1987

5120-14-392-0835
Socket Wrench Crowfoot Attachment

143920835
853-115-014-0: RNCC: 3 | RNVC: 2

21 Mar 1984

5120-14-202-0369
Blacksmith's Top Swage

142020369
M0B17-12EC: RNCC: 3 | RNVC: 2
3831-12EMMANCHE: RNCC: 3 | RNVC: 2

1 Jan 1963

5120-14-421-2054
Spanner Wrench

144212054
OUT-18MS19: RNCC: 3 | RNVC: 2
0UT18MS19: RNCC: 5 | RNVC: 2

6 Jan 1988

5120-14-424-5720
Screwdriver Bit

144245720
ENS.314: RNCC: 3 | RNVC: 2
3148510239279: RNCC: 5 | RNVC: 2
ENS-314: RNCC: 5 | RNVC: 2
0023927: RNCC: 5 | RNVC: 9

1 Jun 1988

5120-14-248-7444
Joint Chargeur

142487444
G1-15-009: RNCC: 3 | RNVC: 2
G1-15009: RNCC: 5 | RNVC: 2
G1-15-009: RNCC: 5 | RNVC: 2
G1-15009: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-552-5280
Screwdriver Bit

145525280
EX.245L: RNCC: 3 | RNVC: 2
EX.245L: RNCC: 5 | RNVC: 2
3148510258256: RNCC: 5 | RNVC: 2

11 Jan 2007

5120-14-031-5023
Hand Terminal Crimping Tool

140315023
20329: RNCC: 3 | RNVC: 2

14 Jun 1980

5120-14-478-0758
Socket Wrench Socket

144780758
M418610A9220A01: RNCC: 3 | RNVC: 2

11 Oct 1995

5120-14-525-0020
Stakeholder Bench Plate

145250020
CKS.30A: RNCC: 3 | RNVC: 2

10 May 2001

5120-14-404-3168
Electrical Connector Inserter

144043168
M4Z6101897001: RNCC: 3 | RNVC: 2

1 Oct 1985

5120-14-248-3549
Rallonge Pour Cle

142483549
PR26601: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-527-8638
Open End Wrench

145278638
E2C001230000110: RNCC: 3 | RNVC: 2

28 Nov 2001

5120-14-329-5955
Face Spanner Wrench Socket

143295955
C47323: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-253-2045
Extracteur Special

142532045
70136M: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-397-1175
Handling Tool Arm

143971175
20735388: RNCC: 3 | RNVC: 2

1 Dec 1984

5120-14-361-7500
Spanner Wrench

143617500
0UT28: RNCC: 3 | RNVC: 2

20 Feb 1980

5120-14-241-1449
Cle A Ergots Specia

142411449
0627-78: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-410-4800
Socket Wrench Socket

144104800
421458: RNCC: 3 | RNVC: 2
421458: RNCC: 5 | RNVC: 9

2 Jul 1986

5120-14-419-2649
Hand Tube Swaging Punch

144192649
536615: RNCC: 3 | RNVC: 2

16 Oct 1987

5120-14-548-1589
Torque Wrench Adapter

145481589
13.32: RNCC: 3 | RNVC: 2

13 Dec 2005

5120-14-233-6939
Douille De Cle A Do

142336939
0176-952082: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-541-4508
Socket Head Screw Key

145414508
DLT5103-104-00: RNCC: 3 | RNVC: 2
D9802: RNCC: 5 | RNVC: 9

10 Jun 2004

5120-14-417-0267
Outil.Cont.Circuit

144170267
T5200MCRO1: RNCC: 3 | RNVC: 9
9797-32: RNCC: 5 | RNVC: 2

30 Jun 1987

5120-14-468-9867
Spanner Wrench

144689867
402-022-000680: RNCC: 3 | RNVC: 2
91387757: RNCC: 5 | RNVC: 2
402-022-000680: RNCC: 5 | RNVC: 2
402-022-000680: RNCC: 5 | RNVC: 9
402-022-000680: RNCC: 5 | RNVC: 9

30 Mar 1994

5120-14-224-3074
Outil De Blocage Te

142243074
6117-3007-618: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-347-5746
Outil Porte Broche

143475746
26-146: RNCC: 3 | RNVC: 2

1 Mar 1978

5120-14-451-0468
Casse Ecrou

144510468
02640907900: RNCC: 3 | RNVC: 2
59539866: RNCC: 5 | RNVC: 2
314704-00: RNCC: 5 | RNVC: 2

28 Oct 1991

5120-14-255-0014

5120-14-303-9268
Cheminee De Percage

143039268
500042-90: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-321-7505
Fixed Open End Wrench Set

143217505
0529236: RNCC: 3 | RNVC: 2
3148515303159: RNCC: 5 | RNVC: 2
44P17E: RNCC: 5 | RNVC: 2
44.P17E: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-384-7619
Electrical Card Extractor

143847619
20198028: RNCC: 3 | RNVC: 2
20198028: RNCC: 5 | RNVC: 9

2 Jun 1983

5120-14-440-2933
Detent Handling Tool

144402933
5000265013: RNCC: 3 | RNVC: 2
89409929: RNCC: 5 | RNVC: 2

11 Jul 1990

5120-14-526-1559
Open End Wrench

145261559
132193: RNCC: 3 | RNVC: 2

4 Jul 2001

5120-14-437-0674
Open End Wrench

144370674
11151: RNCC: 3 | RNVC: 2

17 Jan 1990

5120-14-309-6617
Hand Terminal Crimping Tool

143096617
CCTDM: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-456-2748
Electron Tube Extractor

144562748
008207035P: RNCC: 3 | RNVC: 2

25 Jun 1992

5120-14-532-6844
Outil D'installatio

145326844
74Z-0-0-30: RNCC: 3 | RNVC: 2
74Z-0-0-30: RNCC: 3 | RNVC: 2
61228095AA: RNCC: 5 | RNVC: 2
22743139: RNCC: 5 | RNVC: 2

29 Nov 2002

5120-14-478-1583
Screwdriver Bit Set And Handle

144781583
9522LMA: RNCC: 3 | RNVC: 2

11 Oct 1995

5120-14-468-4441
Detent Handling Tool

144684441
0416379R00: RNCC: 3 | RNVC: 2

2 Mar 1994

5120-14-274-5184
Hand Terminal Crimping Tool

142745184
69355: RNCC: 3 | RNVC: 2
99017626: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-529-0012
Combination Box And Open End Wrench Set

145290012
40R.JU12: RNCC: 3 | RNVC: 2

27 Feb 2002

5120-14-426-8291
Socket Head Screw Key

144268291
0419-40044: RNCC: 3 | RNVC: 2

23 Sep 1988

5120-14-529-4104
Flat Tip Screwdriver Set

145294104
ATH.JS5: RNCC: 3 | RNVC: 2
3148515007026: RNCC: 5 | RNVC: 2
500702: RNCC: 5 | RNVC: 2

29 Mar 2002

5120-14-216-6719

5120-14-546-8885
Carpenters' Pincers

145468885
495A.20EL: RNCC: 3 | RNVC: 2

2 Sep 2005

5120-14-318-6203
Spanner Wrench

143186203
C46334: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-487-0587
Socket Wrench Screwdriver Attachment

144870587
48306: RNCC: 3 | RNVC: 2
48306: RNCC: 5 | RNVC: 2

2 Apr 1997

5120-14-552-5330
Screwdriver Bit

145525330
EX.360: RNCC: 3 | RNVC: 2
EX.360: RNCC: 5 | RNVC: 2
3148510258515: RNCC: 5 | RNVC: 2

12 Jan 2007

5120-14-217-9937
Torque Wrench Adapter

142179937
D014: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-426-8298
Socket Head Screw Key

144268298
0419-40053: RNCC: 3 | RNVC: 2

23 Sep 1988

5120-14-517-1630
Spanner Wrench

145171630
Z11100030: RNCC: 3 | RNVC: 2

10 Nov 1999

5120-14-344-3389
Vise Jaw Caps

143443389
D47728: RNCC: 3 | RNVC: 2

10 Aug 1977

5120-14-338-0772
Pliers

143380772
R282290: RNCC: 3 | RNVC: 2

6 Nov 1976

5120-14-259-2639
Spanner Wrench

142592639
0U12826: RNCC: 3 | RNVC: 2

1 Jan 1969

5120-14-264-0579
Quick Adjusting Screw Clamp

142640579
272A.600: RNCC: 3 | RNVC: 2
3225-60: RNCC: 3 | RNVC: 2
SOE02-060: RNCC: 3 | RNVC: 2
APB60: RNCC: 3 | RNVC: 2
2685-60: RNCC: 3 | RNVC: 9
272A600: RNCC: 5 | RNVC: 2
272-60: RNCC: 5 | RNVC: 2
3148511630068: RNCC: 5 | RNVC: 2
0695 948 60: RNCC: 5 | RNVC: 2
0163006: RNCC: 5 | RNVC: 9

1 Jan 1970

5120-14-378-8444
Controle Bague

143788444
UJD232-47: RNCC: 3 | RNVC: 2
UJD232-47: RNCC: 5 | RNVC: 2

11 Aug 1982

5120-14-494-2676
Cle

144942676
NO PRIMARY REF14-494-2676: RNCC: 3 | RNVC: 2
0104640: RNCC: 5 | RNVC: 9
F300 0T 016 7642: RNCC: 6 | RNVC: 9

15 Oct 1997

5120-14-464-4896
Rivetage Adaptation

144644896
851-910-043-0: RNCC: 3 | RNVC: 2

4 Aug 1993

5120-14-314-4736

5120-14-216-2891

5120-14-510-6876
Lot Tournevis

145106876
PB.MODAZ2: RNCC: 3 | RNVC: 2

4 Nov 1998

5120-14-214-1841

5120-14-229-7572

5120-14-356-1745

5120-14-299-6481
Rupteur Standard

142996481
35051613: RNCC: 3 | RNVC: 2
35051624: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-549-9412
Socket Head Screw Key

145499412
83S.4L: RNCC: 3 | RNVC: 2

18 May 2006

5120-14-314-2326
Spanner Wrench

143142326
160-888059: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-458-3086
Bearing And Bushing Remover

144583086
45056108: RNCC: 3 | RNVC: 2
45056108: RNCC: 5 | RNVC: 9

15 Oct 1992

5120-14-552-4403
Socket Wrench Socket

145524403
S633V3011222: RNCC: 3 | RNVC: 2

3 Jan 2007

5120-14-207-4932
Socket Wrench Socket

142074932
8000303000: RNCC: 3 | RNVC: 2

30 Jan 1982

5120-14-277-3515
Socket Head Screw Key

142773515
8810424002: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-325-0265
Open End Wrench

143250265
0S20744: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-400-6257
Piston Ring Compressor

144006257
DLP753070: RNCC: 3 | RNVC: 2
DLP753070A: RNCC: 5 | RNVC: 2

8 May 1985

5120-14-462-8861
Socket Wrench Adapter

144628861
2230MEPMONT76: RNCC: 3 | RNVC: 2
506707Y: RNCC: 5 | RNVC: 2

5 May 1993

5120-14-520-9662
Adjustable Wrench

145209662
0986611960: RNCC: 3 | RNVC: 2

27 Jun 2000

5120-14-296-7548
Screw Thread Insert Inserter

142967548
01500114960: RNCC: 3 | RNVC: 2
32241480: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-397-4838
Socket Head Screw Key Blade

143974838
ED3: RNCC: 3 | RNVC: 2

14 Dec 1984

5120-14-394-3351
Came-Tourelle Outil

143943351
20196330: RNCC: 3 | RNVC: 2
20196330: RNCC: 5 | RNVC: 9

28 Aug 1984

5120-14-384-6315
Electrical Card Extractor

143846315
16928932: RNCC: 3 | RNVC: 2
16928932: RNCC: 5 | RNVC: 9

2 Jun 1983

5120-14-489-3043
Bearing And Bushing Remover

144893043
10077368: RNCC: 3 | RNVC: 2

9 Jul 1997

5120-14-511-8831
Open End Wrench

145118831
E74301C22AGU: RNCC: 2 | RNVC: 2

28 Jan 1999

5120-14-387-7302
Electrical Card Extractor

143877302
16624146: RNCC: 3 | RNVC: 2
16624146: RNCC: 5 | RNVC: 9

12 Oct 1983

5120-14-219-2171
Cle Col De Cygne Sp

142192171
PR46694: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-325-1493

5120-14-350-5958

5120-14-530-3971
Cle

145303971
10286067: RNCC: 3 | RNVC: 2

10 Jun 2002

5120-14-567-9536
Socket Wrench

145679536
TK00.000: RNCC: 3 | RNVC: 2

28 Apr 2011

5120-14-254-4914

5120-14-576-6119
Mechanical Puller S

145766119
8810499202: RNCC: 3 | RNVC: 2

1 Jul 2013

5120-14-358-7167
Appar A River Appui

143587167
8811637003: RNCC: 3 | RNVC: 2

7 Sep 1979

5120-14-437-9667
Hand Tube Flaring Punch

144379667
P17414: RNCC: 3 | RNVC: 2
P17414: RNCC: 3 | RNVC: 9

28 Feb 1990

5120-14-518-2623
Spanner Wrench

145182623
202406006070: RNCC: 3 | RNVC: 2

1 Feb 2000

5120-14-549-2889
Epissoir

145492889
L.I.N.X-WTC1: RNCC: 3 | RNVC: 2

20 Mar 2006

5120-14-322-1334
Tendeur Sandow Corp

143221334
121E95-170-01-0: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-364-1507
Outil A Derouler

143641507
NO PRIMARY REF14-364-1507: RNCC: 3 | RNVC: 2
SUW13: RNCC: 5 | RNVC: 9

7 Aug 1980

5120-14-031-9694
Montage Piston Obus

140319694
G1-16-118: RNCC: 3 | RNVC: 2
G1-16-118: RNCC: 5 | RNVC: 2

5 Jul 1980

5120-14-370-6172
Verin Fourrure

143706172
12-5205-520: RNCC: 3 | RNVC: 2

18 May 1981

5120-14-521-6334
Socket Wrench Socket

145216334
NO PRIMARY REF14-521-6334: RNCC: 3 | RNVC: 2
JB.13: RNCC: 5 | RNVC: 2
0029127: RNCC: 5 | RNVC: 9

30 Aug 2000

5120-14-425-9516
Appareil Pour Emman

144259516
500346ATH20M2: RNCC: 3 | RNVC: 2

28 Jul 1988

5120-14-491-0130
Cle

144910130
4602 007 200 052: RNCC: 3 | RNVC: 2
F300 0T 001 0916: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-383-4672
Electrical Card Extractor

143834672
20198014: RNCC: 3 | RNVC: 2
20198014: RNCC: 5 | RNVC: 9

11 Apr 1983

5120-14-241-6066
Mandrin De Preserti

142416066
FF6X8MA: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-389-1470

5120-14-548-0713
Socket Wrench Adapter

145480713
SJ.230: RNCC: 3 | RNVC: 2

9 Dec 2005

5120-14-441-9257
Bearing And Bushing Inserter

144419257
1282: RNCC: 3 | RNVC: 2
5000261282: RNCC: 5 | RNVC: 2
F300 0T 009 9790: RNCC: 6 | RNVC: 9

26 Sep 1990

5120-14-385-9815
Spanner Wrench

143859815
0411-60106: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-554-5287
Screwdriver Bit

145545287
3148516396136: RNCC: 3 | RNVC: 2
639613: RNCC: 3 | RNVC: 2
ECAR602: RNCC: 5 | RNVC: 2

18 Jul 2007

5120-14-323-9249
Combination Box And Open End Wrench Set

143239249
0528900: RNCC: 3 | RNVC: 2
40.P22M: RNCC: 5 | RNVC: 2
40P22M: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-516-2250
Flat Tip Screwdriver

145162250
0020652: RNCC: 3 | RNVC: 2

15 Sep 1999

5120-14-393-0307
Open End Wrench

143930307
10-29X32CP: RNCC: 3 | RNVC: 2

12 Apr 1984

5120-14-435-6689
Spanner Wrench

144356689
59012593: RNCC: 3 | RNVC: 9

15 Nov 1989

5120-14-452-1290
Bearing And Bushing Remover

144521290
45057774: RNCC: 3 | RNVC: 2

18 Dec 1991

5120-14-542-7684
Mechanical Puller Set

145427684
5000262546: RNCC: 3 | RNVC: 2

13 Aug 2004

5120-14-410-3831
Spanner Wrench

144103831
15737-504: RNCC: 3 | RNVC: 2

18 Jun 1986

5120-14-485-5883
Spanner Wrench

144855883
PL1NA003AA012627: RNCC: 3 | RNVC: 2

30 Jan 1997

5120-14-238-1382
Spanner Wrench

142381382
850793: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-462-6886
Inserted Hammer Face

144626886
EA.50: RNCC: 3 | RNVC: 2
3148510220604: RNCC: 5 | RNVC: 2
EA50: RNCC: 5 | RNVC: 2
91743452: RNCC: 5 | RNVC: 2
0022060: RNCC: 5 | RNVC: 9

28 Apr 1993

5120-14-278-7835
Inserted Hammer Face

142787835
EC.40: RNCC: 3 | RNVC: 2
EC.40: RNCC: 5 | RNVC: 2
3148510224404: RNCC: 5 | RNVC: 2
EC40: RNCC: 5 | RNVC: 2
0022440: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-548-0091
Combination Box And Open End Wrench

145480091
40R.23: RNCC: 3 | RNVC: 2
40R.23: RNCC: 5 | RNVC: 2
3148511011959: RNCC: 5 | RNVC: 2

5 Dec 2005

5120-14-459-1615
Bearing Staking Installation Tool

144591615
45056158: RNCC: 3 | RNVC: 2
45056158: RNCC: 5 | RNVC: 9

19 Nov 1992

5120-14-386-1676
Open End Wrench

143861676
166938: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-509-0331
Screw Thread Insert Inserter

145090331
01500411000: RNCC: 3 | RNVC: 2
01500411060: RNCC: 5 | RNVC: 2

14 Oct 1998

5120-14-541-1931
Screwdriver Bit Set And Handle

145411931
AMZ.TX3PB: RNCC: 3 | RNVC: 2

19 May 2004

5120-14-235-8658

5120-14-452-9123
Outillage Fraisage

144529123
15189850G: RNCC: 3 | RNVC: 2

27 Jan 1992

5120-14-491-0178
Cordage

144910178
4602 007 600 002: RNCC: 3 | RNVC: 2
F300 0T 001 0967: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-518-0839
Face Spanner Wrench Socket

145180839
8018757W00: RNCC: 3 | RNVC: 2

26 Jan 2000

5120-14-515-5351
Final Drive Assembly Alignment Pin

145155351
150G4373: RNCC: 3 | RNVC: 2

21 Jul 1999

5120-14-282-8422
Extracteur Special

142828422
NO PRIMARY REF14-282-8422: RNCC: 3 | RNVC: 2
1500472: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-424-5723
Screwdriver Bit

144245723
ED.102: RNCC: 3 | RNVC: 2
0022622: RNCC: 5 | RNVC: 2
3148510226224: RNCC: 5 | RNVC: 2
ED-102: RNCC: 5 | RNVC: 2
ED2: RNCC: 5 | RNVC: 2
91626646: RNCC: 5 | RNVC: 2
91628334: RNCC: 5 | RNVC: 2

1 Jun 1988

5120-14-379-4425
Spanner Wrench

143794425
STAS38A: RNCC: 3 | RNVC: 2
ST-AS38A: RNCC: 5 | RNVC: 2

1 Oct 1982

5120-14-411-9129
Valve Spring Lifter

144119129
14-18-979-0K: RNCC: 3 | RNVC: 2
14189790K: RNCC: 3 | RNVC: 2

16 Sep 1986

5120-14-492-5434
Cle

144925434
NO PRIMARY REF14-492-5434: RNCC: 3 | RNVC: 2
5000918861: RNCC: 5 | RNVC: 9
F300 0T 007 9248: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-327-5453
Retaining Ring Pliers

143275453
3309-116: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-513-1255
Screwdriver Bit

145131255
FD6515-C1-2X8: RNCC: 3 | RNVC: 2
FD6515C1-2X8: RNCC: 5 | RNVC: 2
0614 175 711: RNCC: 5 | RNVC: 2

5 Mar 1999

5120-14-309-8741
Electrical Contact Inserter

143098741
8500-29A: RNCC: 3 | RNVC: 2
8500-29A2: RNCC: 5 | RNVC: 2
91357316: RNCC: 5 | RNVC: 2
8500-29A: RNCC: 5 | RNVC: 2
8500-29A: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-466-5917
Bearing And Bushing Inserter And Remover

144665917
851-500-009-0: RNCC: 3 | RNVC: 2

17 Nov 1993

5120-14-364-9927
Outil Demontage

143649927
519636-01: RNCC: 3 | RNVC: 2

2 Sep 1980

5120-14-226-3719

5120-14-527-7745
Spanner Wrench

145277745
TA5111G001: RNCC: 3 | RNVC: 2

20 Nov 2001

5120-14-523-5459
Hydraulic Fitting Crimping Tool Head

145235459
DLT40PSHA3020: RNCC: 3 | RNVC: 2

24 Jan 2001

5120-14-421-3407
Socket Wrench Spanner Attachment

144213407
537047: RNCC: 3 | RNVC: 2

14 Jan 1988

5120-14-545-2116
Shock Type Wheel Stud Nut Wrench

145452116
P337004: RNCC: 3 | RNVC: 2
1KP959: RNCC: 5 | RNVC: 2
4KK958: RNCC: 5 | RNVC: 9

24 Mar 2005

5120-14-402-2388
Spanner Wrench

144022388
36167A: RNCC: 3 | RNVC: 2
36167: RNCC: 5 | RNVC: 2

26 Jun 1985

5120-14-269-5658

5120-14-246-2296

5120-14-566-7585
Electrical Contact Inserter And Remover

145667585
809 854: RNCC: 3 | RNVC: 2
809854: RNCC: 5 | RNVC: 2

15 Dec 2010

5120-14-559-7094
Torque Wrench

145597094
M.200DB: RNCC: 3 | RNVC: 2
3148510325033: RNCC: 5 | RNVC: 2
32503: RNCC: 5 | RNVC: 2

9 Feb 2009

5120-14-565-0017
Inserted Hammer Face

145650017
212.E40: RNCC: 3 | RNVC: 2

28 Jun 2010

5120-14-575-3813
Engine Valve Seat Insert Replacing Tool

145753813
43.300.221: RNCC: 3 | RNVC: 2
43300221: RNCC: 5 | RNVC: 2

2 Apr 2013

5120-14-491-0207
Necessa

144910207
4602 010 600 003: RNCC: 3 | RNVC: 2
F300 0T 001 1002: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-564-2918
Stake Remover

145642918
406056: RNCC: 3 | RNVC: 2

21 Apr 2010

5120-14-237-2410
Appareil De Demonta

142372410
410564: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-494-5616
Clef

144945616
652 358 34: RNCC: 3 | RNVC: 2
F300 0T 017 4802: RNCC: 6 | RNVC: 9

15 Oct 1997

5120-14-420-8753
Screwdriver Bit Set And Handle

144208753
16965917: RNCC: 3 | RNVC: 2
16965917: RNCC: 5 | RNVC: 9

22 Dec 1987

5120-14-432-3760
Open End Wrench

144323760
540547: RNCC: 3 | RNVC: 2
00540547: RNCC: 5 | RNVC: 2

7 Jun 1989

5120-14-483-0675
Cross Tip Screwdriver

144830675
0004071: RNCC: 3 | RNVC: 2
ACP.2X100: RNCC: 5 | RNVC: 2

8 Aug 1996

5120-14-393-8127
Flat Tip Screwdriver

143938127
AGN10X250: RNCC: 3 | RNVC: 2

23 Jun 1984

5120-14-230-3596
Socket Wrench Handle

142303596
GM: RNCC: 3 | RNVC: 2
T120: RNCC: 3 | RNVC: 9
M120: RNCC: 5 | RNVC: 2
3148510323008: RNCC: 5 | RNVC: 2
DEMT120: RNCC: 5 | RNVC: 9
0032300: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-425-6806
Face Spanner Wrench Socket

144256806
8811810000: RNCC: 3 | RNVC: 2

21 Jul 1988

5120-14-254-7140
Socket Head Screw Key

142547140
66515M8: RNCC: 3 | RNVC: 2

1 Jan 1969

5120-14-229-2767
Clutch Tip Screwdriver

142292767
S270148: RNCC: 3 | RNVC: 2
19270148: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-540-7899
Blacksmith's Top Fuller

145407899
DEGORGEOIRVIC: RNCC: 3 | RNVC: 2

23 Apr 2004

5120-14-441-1999
Terminal Crimping Tool Contact Positioner

144411999
R073025007: RNCC: 3 | RNVC: 2
91711058: RNCC: 5 | RNVC: 2
73025007: RNCC: 5 | RNVC: 9

22 Aug 1990

5120-14-419-2721
Hand Tube Swaging Punch

144192721
537450: RNCC: 3 | RNVC: 2

16 Oct 1987

5120-14-273-7532
Pliers

142737532
1518BIS: RNCC: 5 | RNVC: 9
133: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-280-4183
Spanner Wrench

142804183
A125324: RNCC: 3 | RNVC: 2
100129: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-506-2482
Screwdriver Bit

145062482
ENS.218: RNCC: 3 | RNVC: 2
3148510239217: RNCC: 5 | RNVC: 2

15 Apr 1998

5120-14-400-4665
Hand Hydraulic Jack Kit

144004665
RCH202T: RNCC: 3 | RNVC: 9

24 Apr 1985

5120-14-426-8288
Socket Head Screw Key

144268288
0419-40040: RNCC: 3 | RNVC: 2

23 Sep 1988

5120-14-343-1843
Screw Thread Insert Extractor

143431843
35070300: RNCC: 3 | RNVC: 2
01803020000: RNCC: 3 | RNVC: 2
0151667M00: RNCC: 5 | RNVC: 2

16 Jun 1977

5120-14-363-4650
Open End Wrench

143634650
10-15X16: RNCC: 3 | RNVC: 2

9 May 1980

5120-14-281-1898
Socket Head Screw Key

142811898
4627: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-392-1371
Electrical Contact Inserter

143921371
809815: RNCC: 3 | RNVC: 2
91460704: RNCC: 5 | RNVC: 2

21 Mar 1984

5120-14-459-1584
Bearing And Bushing Remover

144591584
45056053: RNCC: 3 | RNVC: 2
45056053: RNCC: 5 | RNVC: 9

19 Nov 1992

5120-14-526-3655
Screw Thread Insert Inserter

145263655
01500203000: RNCC: 3 | RNVC: 2

25 Jul 2001

5120-14-487-5288
Open End Wrench

144875288
61AM007A: RNCC: 3 | RNVC: 2

10 Apr 1997

5120-14-251-1378

5120-14-382-7615
Terminal Crimping Tool Contact Positioner

143827615
809873: RNCC: 3 | RNVC: 2

17 Feb 1983

5120-14-437-1651
Controle Outillage

144371651
22008742-5: RNCC: 3 | RNVC: 2

17 Jan 1990

5120-14-328-1690

5120-14-439-2028
Spanner Wrench

144392028
39441496: RNCC: 3 | RNVC: 2

25 Apr 1990

5120-14-336-3210
Flat Tip Screwdriver

143363210
3417570: RNCC: 3 | RNVC: 2
3406121: RNCC: 5 | RNVC: 2

24 Jul 1976

5120-14-316-6564
Spanner Wrench

143166564
3599014: RNCC: 3 | RNVC: 2
3599014: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-440-2937
Mechanical Puller Adapter

144402937
5000269074: RNCC: 3 | RNVC: 2
89409892: RNCC: 5 | RNVC: 2

11 Jul 1990

5120-14-232-7994
Socket Wrench Adapter-Extension

142327994
15137T12: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-301-9284

5120-14-465-7559
A Rivet Pince

144657559
851-640-001-0: RNCC: 3 | RNVC: 2

14 Oct 1993

5120-14-332-0785
Socket Wrench Crowfoot Attachment

143320785
160-71965-01: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-577-0166
Oil Filter Wrench

145770166
BM411461: RNCC: 3 | RNVC: 2
5120MT0200519: RNCC: 6 | RNVC: 9

29 Jul 2013

5120-14-352-2745
Embout Pour Contact

143522745
055W02-519847K: RNCC: 3 | RNVC: 2
7M147L: RNCC: 3 | RNVC: 2
0519847K00: RNCC: 5 | RNVC: 2

16 Oct 1978

5120-14-411-6332
Bearing And Bushing Inserter

144116332
226443: RNCC: 3 | RNVC: 2

27 Aug 1986

5120-14-538-4977
Tap And Reamer Wrench

145384977
NGM0010038570826: RNCC: 2 | RNVC: 2

9 Dec 2003

5120-14-214-6081
Spanner Wrench

142146081
0UT10: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-477-5011
Pliers

144775011
0460000N00: RNCC: 3 | RNVC: 2

7 Sep 1995

5120-14-268-7023
Electrical Contact Inserter

142687023
809743: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-395-7384
Spanner Wrench

143957384
46AM063: RNCC: 3 | RNVC: 2

30 Oct 1984

5120-14-417-4206
Electronic Equipment Alignment Tool

144174206
006555655: RNCC: 3 | RNVC: 2

8 Jul 1987

5120-14-204-3020

5120-14-420-1889
Raccord Essai Press

144201889
35673: RNCC: 3 | RNVC: 2

24 Nov 1987

5120-14-414-9129
Outil Montag Pignon

144149129
24545840000: RNCC: 3 | RNVC: 2
245458400: RNCC: 5 | RNVC: 9

23 Mar 1987

5120-14-362-1752
Faux Mors

143621752
PR47582M1: RNCC: 3 | RNVC: 2

20 Feb 1980

5120-14-436-0225
Preformed Packing Inserter

144360225
807624: RNCC: 3 | RNVC: 2

29 Nov 1989

5120-14-556-1743
Carpenters' Pincers

145561743
495A.22EL: RNCC: 3 | RNVC: 2
678532: RNCC: 3 | RNVC: 2
3148516785329: RNCC: 5 | RNVC: 2

7 Feb 2008

5120-14-314-5244
Wrench Kit

143145244
3926985: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-323-4737
Faux Mors

143234737
C46797: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-539-3138
Geared Socket Wheel Stud Nut Wrench

145393138
T651G3001121: RNCC: 3 | RNVC: 2

22 Dec 2003

5120-14-512-2008
Socket Head Screw Key

145122008
89TX.8: RNCC: 3 | RNVC: 2

8 Feb 1999

5120-14-461-6804
Vis A Emp Tournevis

5120-14-488-8464
Cle A Ergots

5120-14-415-0673
Cle A Tube

5120-14-548-6587
Socket Wrench Screwdriver Attachment

145486587
JS.3,5: RNCC: 3 | RNVC: 2
00.47.35.79: RNCC: 5 | RNVC: 2

30 Jan 2006

5120-14-561-5689
Screwdriver Bit

145615689
639912: RNCC: 3 | RNVC: 2
ETORM.101/4: RNCC: 3 | RNVC: 2
3059002430: RNCC: 5 | RNVC: 2
3148516399120: RNCC: 5 | RNVC: 2

29 Jul 2009

5120-14-481-8447
Torque Wrench Adapter

144818447
12.9: RNCC: 3 | RNVC: 2
3148510928609: RNCC: 5 | RNVC: 2
0092860: RNCC: 5 | RNVC: 9

4 Jun 1996

5120-14-229-7613
Grain Pour Appareil

142297613
969271: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-572-1075
Spanner Wrench

145721075
261758922: RNCC: 3 | RNVC: 2

7 Jun 2012

5120-14-556-9757
Woven Cable Grip

145569757
78000218: RNCC: 3 | RNVC: 2

25 Apr 2008

5120-14-404-8660
Electrical Contact Inserter

144048660
596: RNCC: 3 | RNVC: 2

20 Nov 1985

5120-14-417-8349
Bearing And Bushing Inserter And Remover

144178349
523012: RNCC: 3 | RNVC: 2

29 Jul 1987

5120-14-459-0570
Socket Wrench Screwdriver Attachment

144590570
RX.10: RNCC: 3 | RNVC: 2
3148515144400: RNCC: 5 | RNVC: 2
0514440: RNCC: 5 | RNVC: 2
RX10: RNCC: 5 | RNVC: 9

18 Nov 1992

5120-14-503-4771
Electronic Component Inserter And Remover

145034771
45240397: RNCC: 3 | RNVC: 2

14 Jan 1998

5120-14-260-2306

5120-14-447-6897
Grommet Inserting Punch And Die

144476897
MATRICEDECALOTTEK104: RNCC: 3 | RNVC: 2
MATRICEDECALOTTEK104: RNCC: 5 | RNVC: 9
85-694-4263: RNCC: 6 | RNVC: 9

29 May 1991

5120-14-345-5492
Wrench Extension Handle

143455492
M2-032-820: RNCC: 3 | RNVC: 2
85-689-4992: RNCC: 6 | RNVC: 9

5 Oct 1977

5120-14-237-5603
Support Freinage In

142375603
60290-01-110M3: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-385-3499
Cable Type Ratchet Lever Puller

143853499
703A91-0212-00: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-346-5042
Outillage Cylindriq

143465042
0U50009A: RNCC: 3 | RNVC: 2
50009A: RNCC: 5 | RNVC: 2
85-679-3090: RNCC: 6 | RNVC: 9

12 Dec 1977

5120-14-565-2610
Spatula

145652610
794-733: RNCC: 3 | RNVC: 2
794-733: RNCC: 5 | RNVC: 2

2 Aug 2010

5120-14-489-3062
Hand Armament Subsystem Carrier

144893062
10348835: RNCC: 3 | RNVC: 2

9 Jul 1997

5120-14-317-3950
Electrical Contact Remover

143173950
20674F: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-449-0049
Open End Wrench

144490049
44.34X36: RNCC: 3 | RNVC: 2
101510: RNCC: 5 | RNVC: 2
3148511024850: RNCC: 5 | RNVC: 2
91714532: RNCC: 5 | RNVC: 2
44.34X36: RNCC: 5 | RNVC: 2
1105436W00: RNCC: 5 | RNVC: 2
0102485: RNCC: 5 | RNVC: 9

24 Jul 1991

5120-14-341-0168
Spanner Wrench

143410168
0415-16: RNCC: 3 | RNVC: 2

16 Mar 1977

5120-14-361-2887
Screwdriver Bit

143612887
LAMETF16: RNCC: 3 | RNVC: 9
101784: RNCC: 5 | RNVC: 2

24 Jan 1980

5120-14-313-7211
Face Spanner Wrench Socket

143137211
C46186: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-354-6017
Spanner Wrench

143546017
269098: RNCC: 3 | RNVC: 2
269098: RNCC: 5 | RNVC: 9

31 Jan 1979

5120-14-375-8007
Open End Wrench

143758007
16929446: RNCC: 3 | RNVC: 2

30 Mar 1982

5120-14-524-4973
Spanner Wrench

145244973
6501POC: RNCC: 3 | RNVC: 2

21 Mar 2001

5120-14-542-6062
Spanner Wrench

145426062
Q47790: RNCC: 3 | RNVC: 2

21 Jul 2004

5120-14-550-1063
Socket Wrench Socket

145501063
9402LOR112: RNCC: 3 | RNVC: 2

1 Jun 2006

5120-14-461-9933
Bearing Staking Installation Tool

144619933
36140315: RNCC: 3 | RNVC: 2

31 Mar 1993

5120-14-548-7422
Socket Wrench Socket

145487422
SJ.16H: RNCC: 3 | RNVC: 2

6 Feb 2006

5120-14-468-9821
Bearing And Bushing Inserter And Remover

144689821
40N108128: RNCC: 3 | RNVC: 2

30 Mar 1994

5120-14-385-5758
Mechanical Puller Attachment

143855758
130632: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-250-2032
Socket Wrench Socket

142502032
B032JB1REP25: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-552-3074
Clamp Base Bench Vise

145523074
29: RNCC: 3 | RNVC: 2

12 Dec 2006

5120-14-362-8905
Screwdriver Handle

143628905
AMJM: RNCC: 3 | RNVC: 2

19 Mar 1980

5120-14-210-9821
Slip Joint Pliers

142109821
181: RNCC: 3 | RNVC: 2
3148510934037: RNCC: 5 | RNVC: 2

1 Jan 1964

5120-14-456-5909
Wrench Extension Handle

144565909
54.M3B: RNCC: 3 | RNVC: 2
3148511105801: RNCC: 5 | RNVC: 2
54M3B: RNCC: 5 | RNVC: 2
0110580: RNCC: 5 | RNVC: 9

9 Jul 1992

5120-14-450-1940
Socket Wrench Socket

144501940
29412996: RNCC: 3 | RNVC: 2

25 Sep 1991

5120-14-284-5087
Spanner Wrench

142845087
T0120BBF5APL6: RNCC: 3 | RNVC: 2
301703T: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-232-1464
Clamp Base Bench Vise

142321464
26: RNCC: 3 | RNVC: 2
233: RNCC: 5 | RNVC: 2
DOL26: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-446-9429
Spanner Wrench

144469429
5975AA K7: RNCC: 2 | RNVC: 2
5975AA K7: RNCC: 3 | RNVC: 2

17 Apr 1991

5120-14-250-1924
Open End Wrench

142501924
848918A: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-529-4108
Socket Wrench Adapter

145294108
NJ.230: RNCC: 3 | RNVC: 2
3148510362403: RNCC: 5 | RNVC: 2

29 Mar 2002

5120-14-323-0560
Spanner Wrench

143230560
8810526001: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-508-7311
Spanner Wrench

145087311
300A96825: RNCC: 3 | RNVC: 2
300A96825: RNCC: 5 | RNVC: 2

29 Sep 1998

5120-14-417-8184

5120-14-456-8210
Bearing And Bushing Remover

144568210
45057794: RNCC: 3 | RNVC: 2
45057794: RNCC: 5 | RNVC: 9

24 Jul 1992

5120-14-447-3390
Bearing And Bushing Inserter And Remover

144473390
45057744: RNCC: 3 | RNVC: 2
45057744: RNCC: 5 | RNVC: 9

15 May 1991

5120-14-447-3389
Bearing And Bushing Inserter And Remover

144473389
45057743: RNCC: 3 | RNVC: 2
45057743: RNCC: 5 | RNVC: 9

15 May 1991

5120-14-400-4653
Socket Wrench Socket

144004653
4510-99: RNCC: 3 | RNVC: 2

24 Apr 1985

5120-14-308-2163

5120-14-570-2322
Seal Inserter

145702322
UFA31639: RNCC: 3 | RNVC: 2

30 Nov 2011

5120-14-511-8182
Outillage Montage

145118182
94MT001: RNCC: 3 | RNVC: 2

26 Jan 1999

5120-14-216-1304
Cle Speciale

142161304
SK20206: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-400-5700
Spanner Wrench

144005700
20320659: RNCC: 3 | RNVC: 2

8 May 1985

5120-14-214-2910
Cle A Rotule Specia

142142910
8582: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-380-1069
A Fourch Tournevis

143801069
004326005P: RNCC: 3 | RNVC: 2

8 Nov 1982

5120-14-375-3671
Crochet Deboucheur

143753671
1195-2: RNCC: 3 | RNVC: 2
89406069: RNCC: 5 | RNVC: 2
91593064: RNCC: 5 | RNVC: 2

26 Feb 1982

5120-14-219-4106
Broche De Montage

142194106
17-9-31: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-249-6799
Extracteur Special

142496799
2-02642: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-450-2226
Square Tip Screwdriver

144502226
20667706: RNCC: 3 | RNVC: 2

25 Sep 1991

5120-14-547-1484
Spanner Wrench

145471484
P549553: RNCC: 3 | RNVC: 2
7KK730: RNCC: 5 | RNVC: 2

28 Sep 2005

5120-14-451-9731
Six Point Tip Screwdriver

144519731
0004025: RNCC: 3 | RNVC: 2
ACHX.50: RNCC: 3 | RNVC: 2

16 Dec 1991

5120-14-422-2232
Socket Head Screw Key

144222232
0373-0U115063: RNCC: 3 | RNVC: 2

24 Feb 1988

5120-14-457-9885
Seal Inserter And Remover

144579885
540416: RNCC: 3 | RNVC: 2

2 Oct 1992

5120-14-285-4550
Spanner Wrench

142854550
HE60X17: RNCC: 3 | RNVC: 2
531457: RNCC: 5 | RNVC: 2
HE60X17: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-253-9691
Spanner Wrench

142539691
PR47369: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-460-8403
Bearing And Bushing Inserter And Remover

144608403
45057207: RNCC: 3 | RNVC: 2
45057207: RNCC: 5 | RNVC: 9

10 Feb 1993

5120-14-429-1384
Sheet Metalworking Dolly Block

144291384
536703: RNCC: 3 | RNVC: 2

11 Jan 1989

5120-14-032-1648
Open End Wrench

140321648
717 BE.L0G: RNCC: 3 | RNVC: 2

1 Sep 1981

5120-14-272-8632
Communications Equipment Spring Adjuster

142728632
S271: RNCC: 3 | RNVC: 2
S271: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-549-3594
Socket Wrench Socket

145493594
31636-43: RNCC: 3 | RNVC: 2

27 Mar 2006

5120-14-362-4879
Socket Wrench Screwdriver Attachment

143624879
099094: RNCC: 3 | RNVC: 2
099094L: RNCC: 5 | RNVC: 2

19 Mar 1980

5120-14-511-6678
Open End Wrench

145116678
NNP5120878750734: RNCC: 3 | RNVC: 2

8 Jan 1999

5120-14-462-6906
Bearing And Bushing Remover

144626906
EX136: RNCC: 3 | RNVC: 2
91743528: RNCC: 5 | RNVC: 2
3272670327214: RNCC: 5 | RNVC: 2

28 Apr 1993

5120-14-520-1487
Spanner Wrench

145201487
5000269016: RNCC: 3 | RNVC: 2

17 May 2000

5120-14-247-3049

5120-14-441-4443
Appareil A Diamante

144414443
7-015413-8: RNCC: 3 | RNVC: 2
7-015413-8: RNCC: 5 | RNVC: 9

27 Aug 1990

5120-14-379-2942
Pince

143792942
2-26429: RNCC: 3 | RNVC: 2

6 Sep 1982

5120-14-559-4942
Bearing And Bushing Inserter And Remover

145594942
8812581000: RNCC: 3 | RNVC: 2

19 Jan 2009

5120-14-257-3006

5120-14-426-8462
Support

144268462
0378-51626: RNCC: 3 | RNVC: 2

23 Sep 1988

5120-14-364-7898
Mandrin Centreur Di

143647898
16849162: RNCC: 3 | RNVC: 2
16849162: RNCC: 5 | RNVC: 9

2 Sep 1980

5120-14-439-2041
Spanner Wrench

144392041
39442331: RNCC: 3 | RNVC: 2

25 Apr 1990

5120-14-273-7006

5120-14-216-1277

5120-14-408-4529
Outil D'installatio

144084529
R282935: RNCC: 3 | RNVC: 2

1 Apr 1986

5120-14-505-8750

5120-14-349-2249
Spanner Wrench

143492249
6238-60009: RNCC: 3 | RNVC: 2
60009: RNCC: 5 | RNVC: 2

22 May 1978

5120-14-530-2097
Combination Box And Open End Wrench Set

145302097
MOD.40-2PB: RNCC: 3 | RNVC: 2

22 May 2002

5120-14-287-1208
Screwdriver Bit

142871208
NO PRIMARY REF14-287-1208: RNCC: 3 | RNVC: 2
ET8: RNCC: 5 | RNVC: 2
SE8: RNCC: 5 | RNVC: 2
3272670209015: RNCC: 5 | RNVC: 2
91367186: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-446-8002
Aiguilles De Verrou

144468002
CH93-3-2: RNCC: 3 | RNVC: 2

16 Apr 1991

5120-14-283-8427

5120-14-348-6463
Hand Tube Flaring Tool

143486463
239: RNCC: 3 | RNVC: 2
3148515385001: RNCC: 5 | RNVC: 2
0538500: RNCC: 5 | RNVC: 9

19 Apr 1978

5120-14-421-9217
Clamp Base Bench Vise

144219217
72720: RNCC: 3 | RNVC: 2
91580533: RNCC: 5 | RNVC: 2
SAM72720: RNCC: 5 | RNVC: 9

10 Feb 1988

5120-14-445-2485
Spanner Wrench

144452485
239608T: RNCC: 3 | RNVC: 2

6 Feb 1991

5120-14-420-8792
Socket Wrench Adapter-Extension

144208792
16965964: RNCC: 3 | RNVC: 2
16965964: RNCC: 5 | RNVC: 9

22 Dec 1987

5120-14-550-9880
Spanner Wrench

145509880
3926.981: RNCC: 3 | RNVC: 2

10 Aug 2006

5120-14-281-5418
Combination Box And Open End Wrench Set

142815418
40.JN12: RNCC: 3 | RNVC: 2
3148515286001: RNCC: 5 | RNVC: 2
0528600: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-367-8783
Electronic Equipment Alignment Tool

143678783
AT8763: RNCC: 3 | RNVC: 2

19 Jan 1981

5120-14-574-4971
Socket Wrench Socket

145744971
NS.8A: RNCC: 3 | RNVC: 2
3148516545312: RNCC: 5 | RNVC: 2
654531: RNCC: 5 | RNVC: 2

23 Jan 2013

5120-14-245-1968

5120-14-271-7759

5120-14-400-0656
Socket Head Screw Key

144000656
131189: RNCC: 3 | RNVC: 2

24 Apr 1985

5120-14-529-8679
Socket Wrench Socket Set

145298679
J.40U: RNCC: 3 | RNVC: 2
3148515034565: RNCC: 5 | RNVC: 2

17 Apr 2002

5120-14-250-0103
Socket Wrench Socket

142500103
K24: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-426-8265
Socket Head Screw Key

144268265
0419-40015: RNCC: 3 | RNVC: 2

23 Sep 1988

5120-14-490-0606
Pliers

144900606
432.LMT: RNCC: 3 | RNVC: 2
0175994: RNCC: 5 | RNVC: 2
3148511759943: RNCC: 5 | RNVC: 2
194-2652: RNCC: 5 | RNVC: 2
FACOM432.LMT: RNCC: 5 | RNVC: 9

10 Sep 1997

5120-14-412-8210
Spanner Wrench

144128210
0481-200010: RNCC: 3 | RNVC: 2

5 Nov 1986

5120-14-380-8372
Spanner Wrench

143808372
C46150: RNCC: 3 | RNVC: 2

14 Dec 1982

5120-14-454-9441
Swivel Knob Jeweler's Screwdriver Set

144549441
500475: RNCC: 3 | RNVC: 2
AMC: RNCC: 3 | RNVC: 2

29 Apr 1992

5120-14-490-6927
File

144906927
241 F 01018 000: RNCC: 3 | RNVC: 2
F300 0T 000 1057: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-214-2912
Cle A Rotule Specia

142142912
8483: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-498-7130
Cle

144987130
703605: RNCC: 3 | RNVC: 2
703605: RNCC: 5 | RNVC: 9
F300 0T 008 2024: RNCC: 6 | RNVC: 9

29 Oct 1997

5120-14-350-4576
Soupape Support

143504576
208696: RNCC: 3 | RNVC: 2
218753: RNCC: 3 | RNVC: 2
MAF0001003568: RNCC: 6 | RNVC: 9

12 Jul 1978

5120-14-338-4790
Cle A Ergots Ergots

143384790
C46490-3: RNCC: 3 | RNVC: 2

6 Nov 1976

5120-14-250-0076
Socket Wrench Socket

142500076
0055420: RNCC: 3 | RNVC: 2
S.24L: RNCC: 5 | RNVC: 2
S24L: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-572-3586
Combination Box And Open End Wrench

145723586
440.3/4: RNCC: 3 | RNVC: 2
3148517683433: RNCC: 5 | RNVC: 2
768343: RNCC: 5 | RNVC: 2

27 Jun 2012

5120-14-548-4758
Socket Wrench Socket

145484758
S.30HLA: RNCC: 3 | RNVC: 2
00.49.48.01: RNCC: 5 | RNVC: 2

19 Jan 2006

5120-14-503-3416
Slip Joint Pliers

145033416
180.CPE: RNCC: 3 | RNVC: 2
TBD90004: RNCC: 5 | RNVC: 2
166/173/0: RNCC: 5 | RNVC: 2
180APY: RNCC: 5 | RNVC: 2
180CPE: RNCC: 5 | RNVC: 2
180E: RNCC: 5 | RNVC: 2
8049381Q00: RNCC: 5 | RNVC: 2
205-5096: RNCC: 5 | RNVC: 2
FACOM180E: RNCC: 5 | RNVC: 9

12 Jan 1998

5120-14-387-1639
Flat Tip Screwdriver

143871639
098088: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-356-6001
Spanner Wrench

143566001
D47562: RNCC: 3 | RNVC: 2

15 May 1979

5120-14-417-8368
Bearing And Bushing Inserter And Remover

144178368
523114: RNCC: 3 | RNVC: 2

29 Jul 1987

5120-14-249-6689
Extracteur Special

142496689
2-02664: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-254-8069
Spanner Wrench

142548069
044BBC4BBF4PL2/2AREP3: RNCC: 3 | RNVC: 2
044BBC4BBF4APL2PC3: RNCC: 5 | RNVC: 2

1 Jan 1969

5120-14-284-5338
Socket Wrench Adapter

142845338
K.200E: RNCC: 3 | RNVC: 2
3148510309002: RNCC: 5 | RNVC: 2
K200E: RNCC: 5 | RNVC: 2
8031877K00: RNCC: 5 | RNVC: 2
0030900: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-417-6798
Flat Tip Screwdriver

144176798
201-7: RNCC: 3 | RNVC: 2

22 Jul 1987

5120-14-473-1299
Flat Tip Screwdriver

144731299
640100: RNCC: 3 | RNVC: 2
1080707G00: RNCC: 5 | RNVC: 2
AC.2,5X50: RNCC: 5 | RNVC: 2
0003807: RNCC: 5 | RNVC: 9

7 Dec 1994

5120-14-431-1052
Socket Wrench Socket

144311052
K.24A: RNCC: 3 | RNVC: 2
K24A: RNCC: 5 | RNVC: 2
3148510292250: RNCC: 5 | RNVC: 2
0029225: RNCC: 5 | RNVC: 9

5 Apr 1989

5120-14-423-2207
Poussoir

144232207
0747114: RNCC: 3 | RNVC: 2
SP.1733 D-4: RNCC: 5 | RNVC: 2
SP1733D-4: RNCC: 5 | RNVC: 2

13 Apr 1988

5120-14-520-0017
Flat Tip Screwdriver

145200017
22367083-4: RNCC: 3 | RNVC: 2

3 May 2000

5120-14-316-5580
Cle Arbre Ventilate

143165580
321A97-3218-00: RNCC: 3 | RNVC: 2
321-97-3218-00: RNCC: 5 | RNVC: 2
08-453: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-321-8453
Demonte Frein

143218453
8000024805: RNCC: 3 | RNVC: 2
9309: RNCC: 5 | RNVC: 2
85-686-2835: RNCC: 6 | RNVC: 9

1 Jan 1975

5120-14-365-9726
Spanner Wrench

143659726
366A93-3100-20: RNCC: 3 | RNVC: 2

4 Nov 1980

5120-14-316-8597
Retaining Ring Pliers

143168597
0140780: RNCC: 3 | RNVC: 2
177.23: RNCC: 5 | RNVC: 2
101868: RNCC: 5 | RNVC: 2
177-23: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-388-0652
Emman Regla Syn Cle

143880652
95-02N25791: RNCC: 3 | RNVC: 2

12 Oct 1983

5120-14-400-2696
Spanner Wrench

144002696
424-65380-000: RNCC: 3 | RNVC: 2
01-424-90745-000: RNCC: 5 | RNVC: 2

24 Apr 1985

5120-14-309-8591
Wrench Extension Handle

143098591
2141: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-417-4614
Emmanchement Outil

144174614
1724770: RNCC: 3 | RNVC: 9

8 Jul 1987

5120-14-234-3367

5120-14-450-8168
Face Spanner Wrench Socket

144508168
10193434: RNCC: 3 | RNVC: 2

23 Oct 1991

5120-14-208-6449

5120-14-316-4980
Spanner Wrench

143164980
0U50018: RNCC: 3 | RNVC: 2
50018: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-285-6416

5120-14-225-3191

5120-14-561-9765
Slip Joint Pliers

145619765
484A.30: RNCC: 3 | RNVC: 2
178866: RNCC: 5 | RNVC: 2
3148511788660: RNCC: 5 | RNVC: 2

22 Sep 2009

5120-14-523-5448
Hydraulic Fitting Crimping Tool Head

145235448
DLT20PSHA3110: RNCC: 3 | RNVC: 2

24 Jan 2001

5120-14-524-4974
Spanner Wrench

145244974
6517POC: RNCC: 3 | RNVC: 2

21 Mar 2001

5120-14-252-5755
Hand Terminal Crimping Tool

142525755
476650: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-265-6331
Hand Terminal Crimping Tool

142656331
48698: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-548-8497
Six Point Tip Screwdriver

145488497
AZXR.27X100: RNCC: 3 | RNVC: 2
AZXR.27X100: RNCC: 5 | RNVC: 2

20 Feb 2006

5120-14-378-8331
Socket Wrench Socket

143788331
8812457002: RNCC: 3 | RNVC: 2

11 Aug 1982

5120-14-505-5277
Screwdriver Bit

145055277
ES.002: RNCC: 3 | RNVC: 2
3148510245782: RNCC: 5 | RNVC: 2
ES002: RNCC: 5 | RNVC: 2
1080343D00: RNCC: 5 | RNVC: 2
0024578: RNCC: 5 | RNVC: 2

20 Mar 1998

5120-14-449-0145
Quick Adjusting Screw Clamp

144490145
76246: RNCC: 3 | RNVC: 2
89280633: RNCC: 5 | RNVC: 2

24 Jul 1991

5120-14-449-8530
Hand Armament Subsystem Carrier

144498530
389206A: RNCC: 3 | RNVC: 2

11 Sep 1991

5120-14-488-4077
Verro Manoeuvre Cle

144884077
EMB0068: RNCC: 3 | RNVC: 2

7 May 1997

5120-14-262-5560
Mandrin De Montage

142625560
M0NT18087: RNCC: 3 | RNVC: 2
M0N18087: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-490-8964
Ve

144908964
4067 750 000 874: RNCC: 3 | RNVC: 2
F300 0T 000 5251: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-544-9295
Cross Tip Screwdriver

145449295
62443: RNCC: 3 | RNVC: 2

7 Mar 2005

5120-14-537-1288
Open End Wrench

145371288
SP.12583: RNCC: 3 | RNVC: 2

1 Oct 2003

5120-14-305-9107
Spanner Wrench

143059107
M251895: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-514-0455
Screwdriver Bit Set And Handle

145140455
LDB301100: RNCC: 3 | RNVC: 2

22 Apr 1999

5120-14-537-3879
Socket Wrench Screwdriver Attachment

145373879
NJH.17: RNCC: 3 | RNVC: 2
1129857D00: RNCC: 5 | RNVC: 2

3 Nov 2003

5120-14-472-1651
Slip Joint Pliers

144721651
8224: RNCC: 3 | RNVC: 2

12 Oct 1994

5120-14-561-2446
Socket Wrench Socket

145612446
RA-8: RNCC: 3 | RNVC: 2

30 Jun 2009

5120-14-225-9691
Cle A Ergot Special

142259691
B044TE1AREP14: RNCC: 3 | RNVC: 2
B0120TE102AREP14: RNCC: 5 | RNVC: 2

1 Jan 1966

5120-14-527-9776
Socket Head Screw Key

145279776
84TZ.2,5: RNCC: 3 | RNVC: 2
3148511256329: RNCC: 5 | RNVC: 2
84TZ-2-5: RNCC: 5 | RNVC: 2

5 Dec 2001

5120-14-530-6461
Spanner Wrench

145306461
R46613: RNCC: 3 | RNVC: 2

1 Jul 2002

5120-14-355-3440
Socket Wrench Socket

143553440
RT20540B: RNCC: 3 | RNVC: 2

19 Mar 1979

5120-14-272-3593
Spanner Wrench

142723593
E74323A45AGW: RNCC: 2 | RNVC: 2

1 Jan 1971

5120-14-325-4838
Spanner Wrench

143254838
16279J: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-484-6533
Socket Head Screw Key

144846533
83SH.10: RNCC: 3 | RNVC: 2
3148511238332: RNCC: 5 | RNVC: 2
235-2820: RNCC: 5 | RNVC: 2
0715 311 54: RNCC: 5 | RNVC: 2
0123833: RNCC: 5 | RNVC: 9
FACOM83SH.10: RNCC: 5 | RNVC: 9

28 Nov 1996

5120-14-451-9722
Screwdriver Bit

144519722
ENP.201: RNCC: 3 | RNVC: 2
ENP.201: RNCC: 5 | RNVC: 2
3148510239019: RNCC: 5 | RNVC: 2
0023901: RNCC: 5 | RNVC: 9

16 Dec 1991

5120-14-427-9528
Mechanical Puller Attachment

144279528
85705-9029868: RNCC: 3 | RNVC: 2
50300: RNCC: 5 | RNVC: 2
91600630: RNCC: 5 | RNVC: 2

24 Nov 1988

5120-14-472-5076
Flat Tip Screwdriver

144725076
730874: RNCC: 3 | RNVC: 2
89301190: RNCC: 5 | RNVC: 2

26 Oct 1994

5120-14-249-9682
Spanner Wrench

142499682
1834T: RNCC: 3 | RNVC: 2
MR3732: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-419-2668
Hand Material Handling Hook

144192668
530772: RNCC: 3 | RNVC: 2

16 Oct 1987

5120-14-417-8362
Bearing And Bushing Inserter And Remover

144178362
523090: RNCC: 3 | RNVC: 2

29 Jul 1987

5120-14-429-8784
Friction Igniter Flint Tip

144298784
5498: RNCC: 3 | RNVC: 2
91369186: RNCC: 5 | RNVC: 2
GUI5498: RNCC: 5 | RNVC: 9

15 Feb 1989

5120-14-514-6982
Open End Wrench

145146982
SP.3247: RNCC: 3 | RNVC: 2

9 Jun 1999

5120-14-031-5022
Electrical Contact Remover

140315022
59ABX1: RNCC: 3 | RNVC: 2

14 Jun 1980

5120-14-369-7340
Terminal Crimping Tool Contact Positioner

143697340
1-483261-7: RNCC: 3 | RNVC: 2
K344: RNCC: 5 | RNVC: 2

17 Apr 1981

5120-14-575-8187
Mechanical Puller S

145758187
TM5400P001-: RNCC: 3 | RNVC: 2

6 May 2013

5120-14-319-4065
Craftsman's Tweezers

143194065
120: RNCC: 3 | RNVC: 9

1 Jan 1975

Load More Results