What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.

A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Blacksmith's Punch?

A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Mechanical Finger?

A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.

A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Screwdriver And Wrench Assembly?

A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Stakeholder Bench Plate?

A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.

What is a Drill Drift?

A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.

A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Digging Bar?

A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

What is a Valve Spring Lifter?

A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.

What is a Fuse Puller?

A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.

Hand Tools, Nonedged, Nonpowered - France (FR)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by France (FR) - NCB is 14

Page 55 of 110

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by France

51	20	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - France (FR)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 16 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Pipe Vise? 19 Items: A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.
What is a Hand Vise? 25 Items: A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.
What is a Hand Hydraulic Jack? 133 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 153 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 903 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 17 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
Swage,Bottom,Blacksmith's 10 Items
What is a Hand Tube Flaring Tool? 23 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Blacksmith's Punch? 12 Items: A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.
What is a Drain Plug Wrench? 45 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 57 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 16 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 3829 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
Flatter,Blacksmith's 18 Items
Swage,Top,Blacksmith's 12 Items
What is a Pipe Wrench? 110 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 149 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 53 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
Screwdriver,Offset 54 Items
What is a Screwdriver Bit? 707 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Mechanical Finger? 25 Items: A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.
What is a Socket Wrench Socket? 1803 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 1412 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 1641 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 52 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 565 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
Jack,Push-Pull,Screw 30 Items
What is a Hand Tube Bender? 54 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 1106 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 55 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pinch Bar? 19 Items: A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.
What is a Pry Bar? 17 Items: A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.
What is a Wrecking Bar? 15 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 273 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 413 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 32 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 295 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
Face,Hammer,Inserted 25 Items
What is a Hole Sheet Metal Holder? 37 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Screwdriver And Wrench Assembly? 11 Items: A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.
What is a Hand Rivet Set? 121 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Stakeholder Bench Plate? 22 Items: A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.
What is a Drill Drift? 32 Items: A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.
What is a Tack Claw? 15 Items: A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.
Mattock 28 Items
What is a Socket Wrench Handle Bar? 108 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Stake,Sheet Metalworking 50 Items
Riveter,Blind,Hand 76 Items
What is a Hand Shovel? 43 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 98 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 30 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
What is a Digging Bar? 20 Items: A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.
Block,Dolly,Sheet Metalworking 56 Items
What is a Piston Ring Compressor? 34 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Valve Spring Lifter? 29 Items: A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.
What is a Fuse Puller? 20 Items: A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.
What is a Hand Lead Seal Press? 18 Items: A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.
What is a Hand Beading Tool? 91 Items: A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.
What is a Hand Hammer? 502 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
Head,Hand Hammer 81 Items
What is a Lamp Extractor? 76 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Tube Packing Ring Installing Tool? 29 Items: A Tube Packing Ring Installing Tool (INSTALLING TOOL,TUBE PACKING RING) is an item designed to insert packing rings on tubes within tube sheets on condensers and similar heat exchangers. In operation, the packing rings are assembled on the loading pin mandrel and are then transferred from the mandrel on to the tube by means of a tubular sleeve which slides on the mandrel.
What is a Carpenters' Pincers? 18 Items: A Carpenters' Pincers (PINCERS,CARPENTERS') is a plierlike hand tool having two opposing jaws which may have hammerlike backs. One handle has a nail or tack pulling claw, the other is shaped to form a screwdriver. The tool may contain a wire cutter. See also NIPPERS, END CUTTING and PINCERS, FARRIERS'.
What is a Trowel? 33 Items: A Trowel is a tool used for bricklaying, concrete work, plastering, linoleum laying, and masonry work. Excludes CORNER TOOL, CONCRETE.
What is a Hand Abrasive Wheel Dresser? 12 Items: A Hand Abrasive Wheel Dresser (DRESSER,ABRASIVE WHEEL,HAND) is a tool designed to remove glaze from, dress, shape, sharpen, and true solid abrasive wheels. Excludes NIB, DIAMOND, WHEEL DRESSING.
What is a Lamp Cap Extractor? 32 Items: A Lamp Cap Extractor (EXTRACTOR,LAMP CAP) is a tool specifically designed to facilitate the removal of lamp caps from switchboards, panels or indicator lamps.
What is a Rivet Bucking Bar? 51 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 86 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 277 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Woven Cable Grip? 23 Items: A Woven Cable Grip (GRIP,CABLE,WOVEN) is a braided wire device designed to clutch a bare or insulated conductor, cable or wire rope, for holding taut or drawing through conduit.
What is a Screw Thread Insert Extractor? 19 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is an Electron Tube Extractor? 18 Items: An Electron Tube Extractor (EXTRACTOR,ELECTRON TUBE) is a hand tool designed to facilitate the removal of electron tubes from electronic equipment and to avoid burning the fingers. It may be used for installing tubes.
What is a Cross Tip Screwdriver? 362 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 21 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 11 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 37 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Tool Handle Wedge? 10 Items: A Tool Handle Wedge (WEDGE,TOOL HANDLE) is excludes WEDGE, WOOD.
What is a Marlinespike? 16 Items: A Marlinespike is a metal hand tool made in the shape of a tapered pin. One end is pointed and the opposite end may be headed. The body may contain an eye for a lanyard sling, or be grooved lengthwise. Excludes CABLE PICK and FID.
What is an Aligning Punch? 272 Items: An Aligning Punch (PUNCH,ALIGNING) is a round, square, hexagonal or octagonal bodied hand tool, having a round tapered section 6-1/2 inches (165.1 mm) or more in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, DRIFT and DRIFTPIN.
What is a Drift Punch? 25 Items: A Drift Punch (PUNCH,DRIFT) is a round, square, hexagonal, or octagonal bodied hand tool, having a round tapered section 4 to 6 inches (101.6 mm to 152.4 mm) inclusive in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, ALIGNING; and DRIFTPIN.
What is a Putty Knife? 36 Items: A Putty Knife (KNIFE,PUTTY) is a hand tool with a nonedged blade fixed to a handle for laying on and smoothing putty and the like.
What is a Socket Wrench Adapter-Extension? 40 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 30 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 184 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Socket Wrench Ratchet Attachment? 47 Items: A Socket Wrench Ratchet Attachment (RATCHET ATTACHMENT,SOCKET WRENCH) is a connection for socket wrenches and handles. Consists of a ratcheting mechanism with an internal drive on one end and an external drive on the opposite end of the same size. The item is designed to permit continuous rotation of the socket in one direction without removing the socket or handle and without a complete rotation of the handle.
What is a Wrench Extension Handle? 81 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Socket Wrench Crowfoot Attachment? 155 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 33 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 43 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 48 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 2394 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 372 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 300 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 661 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 32 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand-Operated Grommet And Eyelet Press? 12 Items: A Hand-Operated Grommet And Eyelet Press (PRESS,GROMMET AND EYELET,HAND-OPERATED) is a device which punches or pierces holes and in addition fastens or sets eyelets and grommets in cloth, paper and similar material. May be used for fastening or setting rivets, lacing hooks and snaps in cloth, paper and similar material. It is hand operated by lever or screw action. See also PUNCH, EYELET, PLIER TYPE and PRESS, GROMMET AND EYELET, FOOT OPERATED.
What is a Claw Bar? 19 Items: A Claw Bar (BAR,CLAW) is before using, refer to Reference Drawing Group AG.
What is a Shock Type Wheel Stud Nut Wrench? 11 Items: A Shock Type Wheel Stud Nut Wrench (WRENCH,WHEEL STUD NUT,SHOCK TYPE) is a manually operated item designed to remove wheel stud nuts. In operation the inner nut is turned by a socket attached to a shaft on which is a loose swinging weighted handle. The weighted handle may be swung quickly to provide an impact force against the socket to loosen the seized or jammed nuts. The outer nut is held stationary by a separate hexagonal holding wrench.
What is a Drift Pin Set? 30 Items: A Drift Pin Set is a group of DRIFTPIN having different characteristics.
What is a Tire Iron? 25 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 115 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Blacksmith's Vise? 14 Items: A Blacksmith's Vise (VISE,BLACKSMITH'S) is a clamping device consisting of a mounting plate, one stationary and one manual screw actuated jaw and a supporting member extending downward from the stationary jaw to the floor. Designed to be mounted on a bench, table or the like. May include pipe holding jaws.
What is a Machinist's Vise? 64 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Clamp Base Bench Vise? 10 Items: A Clamp Base Bench Vise (VISE,BENCH,CLAMP BASE) is a clamping device consisting of a base, one stationary and one manual screw actuated jaw, and one or more guide bars or rods. Designed with an integral clamp for attaching to a bench, table, or the like. Does not include pipe holding jaws.
What is a Fixed Open End Wrench Set? 86 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Nail Set? 11 Items: A Nail Set is a round knurled, square, hexagonal or octagonal bodied hand tool having a round tapered section terminating in a cupped point. It is designed to set brad head nails below the surface by striking it a hammerlike blow. See also PUNCH, DRIVE PIN.
What is a Socket Wrench Set? 202 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is an Open End Box Wrench Set? 10 Items: An Open End Box Wrench Set (WRENCH SET,OPEN END BOX) is a group of WRENCH, OPEN END BOX having different characteristics.
What is a Combination Box And Open End Wrench Set? 72 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Box Wrench Set? 36 Items: A Box Wrench Set (WRENCH SET,BOX) is a group of box wrenches having different characteristics. It may include a HANDLE, EXTENSION WRENCH. See also WRENCH SET, COMBINATION, BOX AND OPEN END.
What is a Hot Line Stick? 26 Items: A Hot Line Stick is a hand tool consisting of a straight, round stick (pole) made of a suitable nonconductive material with a tool fixed to one end. The other end may be plain or have a butt mounting device fixed to it. Various types of attachments (hooks, rings, and bands) may be fixed to the body. It is designed for use in the repair and maintenance of live high voltage aerial lines. Excludes hot line sticks without heads.
Handle,Mattock-Pick 15 Items
What is a Wrench Kit? 73 Items: A Wrench Kit is an assortment of various types and sizes of wrenches such as SOCKET, SOCKET WRENCH; WRENCH, OPEN END, FIXED; WRENCH, BOX and the like. It may include adapter(s), ratchet(s) and the like. See also WRENCH SET (as modified.
What is a Brad Awl? 15 Items: A Brad Awl (AWL,BRAD) is a small, pointed tool used by shoemakers, saddlers, cabinetmakers, and the like for piercing small holes in wood, leather, and similar materials, and consists of a handle with a ferrule and a blade. The blade is round, terminating in a beveled, sharp straight edge and has a shank which passes through the center of the handle.
What is a Scratch Awl? 20 Items: A Scratch Awl (AWL,SCRATCH) is an item whose nominal length of blade is less than 4 inches (101.6 millimeters) and is provided with a nondetachable handle.
What is a Screw Extractor Set? 10 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 102 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
Jack,Scissors,Hand 26 Items
What is a Piston Ring Expander? 23 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
Mallet,Plastic 62 Items
Mallet,Rubber 10 Items
What is a Wood Mallet? 37 Items: A Wood Mallet (MALLET,WOOD) is excludes MALLET, CALKING; MALLET, HAWSING and MALLET, SERVING.
What is a Rack Bar Jack? 30 Items: A Rack Bar Jack (JACK,RACK BAR) is excludes JACK, BUMPER and JACK, REEL, HAND.
What is a Pneumatic Tire Valve Core Inserter And Remover? 14 Items: A Pneumatic Tire Valve Core Inserter And Remover (INSERTER AND REMOVER,PNEUMATIC TIRE VALVE CORE) is a bar of steel having a small cylindrical slotted end for removing or installing a valve core in a valve stem by a screwing motion. See also REPAIR TOOL, PNEUMATIC TIRE VALVE.
What is a Hand Tube Swaging Tool Kit? 20 Items: A Hand Tube Swaging Tool Kit (SWAGING TOOL KIT,TUBE,HAND) is a hand-operated noncutting tool consisting of one or more PUNCH, TUBE SWAGING, HAND and a tube flaring bar.
What is a Hand Tube Flaring Punch? 11 Items: A Hand Tube Flaring Punch (PUNCH,TUBE FLARING,HAND) is a noncutting tool having a shaped end or section designed to flare the ends of tubes. One type is designed to flare the ends of tubes against a tube sheet, and another to flare tube ends to mate with tube fittings. Includes punch components of FLARING TOOL, TUBE, HAND.
What is a Hose Strap Band Clamping Tool? 26 Items: A Hose Strap Band Clamping Tool (CLAMPING TOOL,STRAP BAND,HOSE) is an item designed to tension and lock metal straps around a rubber hose, and the like. It is also used to clamp and hold fittings therein.
What is a Mechanical Puller? 3073 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 470 Items
What is a Slip Joint Pliers? 84 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Brake Repair Pliers? 14 Items: A Brake Repair Pliers (PLIERS,BRAKE REPAIR) is a tool having jaws designed for use in brake repair operations, such as removing and replacing items such as keys, springs, and the like. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 226 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 12 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 81 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 56 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 15 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 11 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 29 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Cross Tip Screwdriver Set? 14 Items: A Cross Tip Screwdriver Set (SCREWDRIVER SET,CROSS TIP) is a group of SCREWDRIVER, CROSS TIP having different characteristics.
What is a Spanner Wrench Set? 18 Items: A Spanner Wrench Set (WRENCH SET,SPANNER) is a group of items under WRENCH, SPANNER having different characteristics.
What is a Drive Pin Punch Set? 31 Items: A Drive Pin Punch Set (PUNCH SET,DRIVE PIN) is a group of PUNCH, DRIVE PIN having different characteristics.
What is an Aligning Punch Set? 13 Items: An Aligning Punch Set (PUNCH SET,ALIGNING) is a group of PUNCH, ALIGNING having different characteristics. See also DRIFTPIN SET.
What is a Slugging Type Box Wrench Socket? 16 Items: A Slugging Type Box Wrench Socket (SOCKET,SLUGGING TYPE BOX WRENCH) is an item having a hexagonal external drive at one end, made to fit into the internal hexagonal or 12-point opening of a slugging type box wrench. The opposite end has a single-broached hexagonal opening of the same size as the external drive. The item is designed with extra thick walls to withstand the impact of sledge blows on the driving wrench.
What is a Mechanical Puller Step Plate? 44 Items: A Mechanical Puller Step Plate (STEP PLATE,MECHANICAL PULLER) is a circular disk, flanged to provide a shoulder, and designed to provide a base for the screw point of a PULLER, MECHANICAL when pulling externally mounted bearings, gears, and the like from hollow shafts or housings. It has a concentric, countersunk hole to accommodate the puller screw point.
What is a Solid Center Punch? 79 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Cable Type Ratchet Lever Puller? 20 Items: A Cable Type Ratchet Lever Puller (PULLER,RATCHET LEVER,CABLE TYPE) is an item consisting of a metal frame and ratchet lever reel to which is attached one end of a flexible cable (wire rope). The cable feeds through the fast eye in the metal frame, and may be reeved through a slip hook tackle hook. See also BINDER, LOAD; HOIST, WIRE ROPE and STRETCHER, WIRE.
What is an Electronic Equipment Tuning Wand? 18 Items: An Electronic Equipment Tuning Wand (TUNING WAND,ELECTRONIC EQUIPMENT) is a hand-held rod used in determining the adjustment of the windings of a radio frequency coil. It is made of insulating material with iron on one end and brass on the other end. By inserting the iron end in the coil, the inductance is increased and by inserting the brass end, the inductance is decreased.
What is a Combination Open End And Spanner Wrench? 14 Items: A Combination Open End And Spanner Wrench (WRENCH,OPEN END AND SPANNER,COMBINATION) is a tool having open end wrench characteristics at one end and spanner wrench features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s) at the other end.
What is a Detent Handling Tool? 187 Items: A Detent Handling Tool (HANDLING TOOL,DETENT) is a specially designed handling tool consisting of a rigid bar with a T-handle on one end. The other end is equipped with threads designed to mate the threads of a detent to facilitate inserting or extracting.
What is a Hand Material Handling Hook? 23 Items: A Hand Material Handling Hook (HOOK,MATERIAL HANDLING,HAND) is a hook whose curved end conforms to Style AP1, AP2, AP3 or AP4 of Reference Drawing Group AP. Excludes HOOK, MANHOLE COVER, HAND; HOOK, WIRE BREAKING, HAND; HOOK, ROCK CRUSHER FEEDING, HAND; HOOK, STRAINER REMOVING, HAND and HOOKS, BAG HANDLING, HAND.
What is a Magnetic Retrieving Tool? 11 Items: A Magnetic Retrieving Tool (RETRIEVING TOOL,MAGNETIC) is a hand-operated magnetic device used to locate and pick up metallic articles, such as bolts, nuts, pins, washers, and the like, in confined spaces. It may be rigid, flexible or adjustable. Excludes FINGER, MECHANICAL.
What is a Mechanical Puller Adapter? 78 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Combination Box And Open End Box Wrench? 13 Items: A Combination Box And Open End Box Wrench (WRENCH,BOX AND OPEN END BOX,COMBINATION) is a double end wrench, box and open end box, primarily designed for removing or replacing tube fittings. The opening in the open end box may be machined at an angle from the longitudinal center line of the wrench.
What is a Screw Thread Insert Inserter? 136 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Flat Tip Screwdriver Set? 48 Items: A Flat Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP) is a group of SCREWDRIVER, FLAT TIP having different characteristics.
What is a Terminal Crimping Tool Contact Positioner? 89 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 16 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is an Adjustable Wrench? 138 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 239 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 75 Items
Handle,Shovel 10 Items
What is a Socket Wrench Spanner Attachment? 88 Items: A Socket Wrench Spanner Attachment (SPANNER ATTACHMENT,SOCKET WRENCH) is an item having an adjustable or fixed span with pin, hook, or key type end that is used to fit and turn various size retaining rings, cover plates, plugs, couplings, and like parts. Usually designed to be driven by a male driver.
What is a Retaining Ring Installation Tool? 44 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Tacker? 16 Items: A Tacker is a hand-operated, hammerlike or gunlike item without a clincher, used to drive preformed connecting elements like pins, nails or staples through one object or piece of material into another. Excludes STAPLER (as modified).
What is a Bearing And Bushing Inserter? 290 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 207 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 939 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 14 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 93 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 161 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 94 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 141 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 53 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Six Point Tip Screwdriver? 155 Items: A Six Point Tip Screwdriver (SCREWDRIVER,SIX POINT TIP) is a manual screwdriver having a single nonremoveable blade having a tip with six rounded points.
What is a Seal Inserter And Remover? 147 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 478 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is a Preformed Packing Inserter And Remover? 34 Items: A Preformed Packing Inserter And Remover (INSERTER AND REMOVER,PREFORMED PACKING) is a hand tool designed to install and remove a PACKING, PREFORMED.
What is a Pin Remover? 34 Items: A Pin Remover (REMOVER,PIN) is a hand tool designed to facilitate the removal of a pin from a hole.
What is a Pin Inserter And Remover? 13 Items: A Pin Inserter And Remover (INSERTER AND REMOVER,PIN) is a rodlike tool designed to facilitate the insertion and removal of a pin from a hole.
What is an Electrical Contact Inserter And Remover? 37 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Piston Inserter? 40 Items: A Piston Inserter (INSERTER,PISTON) is a tool designed to permit installation of a piston or piston assembly without damaging the packings or piston.
What is a Spring Inserter And Remover? 85 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 13 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Stud Inserter? 22 Items: A Stud Inserter (INSERTER,STUD) is a device designed to drive in studs. It does not have any facilities for removing or extracting studs. See also INSERTER AND REMOVER, STUD.
What is a Stud Inserter And Remover? 17 Items: A Stud Inserter And Remover (INSERTER AND REMOVER,STUD) is a group of items designed to extract and to drive studs. It may include collets, guides, housings, holders and the like. See also REMOVER SET, STUD and INSERTER, STUD.
What is a Gear Inserter? 54 Items: A Gear Inserter (INSERTER,GEAR) is a hand tool designed to install various gears onto a gearshaft. It may be operated by a pushing or a striking force.
What is a Crimping Tool Die? 73 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is an Electrical Connector Inserter? 45 Items: An Electrical Connector Inserter (INSERTER,ELECTRICAL CONNECTOR) is a hand tool designed to hold an electrical connector, and to assist in the positioning and installation of the connector on a cover, panel or the like.
What is a Float? 12 Items: A Float is a tool used for concrete, plastering and grouting work.
What is a Mechanical Puller Set? 19 Items: A Mechanical Puller Set (PULLER SET,MECHANICAL) is two or more separate PULLER, MECHANICAL of different fixed sizes.
What is a Lifting Pneumatic Bag? 11 Items: A Lifting Pneumatic Bag (PNEUMATIC BAG,LIFTING) is a device made of flexible material designed to lift another item by being placed under the item and being inflated with air or some other gas. It will have a means of being connected to an air or gas source and may include a connector hose, a control valve and/or a pressure regulator.
What is a Cable Tie Installation Tool? 22 Items: A Cable Tie Installation Tool (INSTALLATION TOOL,CABLE TIE) is a lightweight, hand-held, hand-operated tool designed to fasten cable ties, straps and the like. Cable tie is inserted into the nose of the tool flush to the cable tie head. Trigger handle tightens cable tie and cuts off any excess. These installation tools are available in a variety of sizes depending on their intended use with miniature, intermediate, standard, heavy or extra heavy cross section ties.
What is a Bearing Staking Installation Tool? 159 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
Wrench Set,Ratchet 15 Items
What is a Sealant Dispenser? 26 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Retaining Ring Pliers Set? 10 Items: A Retaining Ring Pliers Set (PLIERS SET,RETAINING RING) is a group of PLIERS, RETAINING RING having different characteristics.
What is a Hand Armament Subsystem Carrier? 52 Items: A Hand Armament Subsystem Carrier (CARRIER,ARMAMENT SUBSYSTEM,HAND) is a metallic item with a clamp device and/or space for depositing articles. It is used for transporting weapon parts during maintanence and/or repair work, such as gun barrel, automatic loader, breechblock and the like.
What is a Ring Retaining Pliers Tip Set? 13 Items: A Ring Retaining Pliers Tip Set (TIP SET,PLIERS,RING RETAINING) is a collection of removable metallic tips in matched pairs used to provide various size capablities to PLIERS, RING RETAINING which permits the removal and installation of internal and external retaining rings.
What is a Plug Electrical Connector Extractor? 45 Items: A Plug Electrical Connector Extractor (EXTRACTOR,ELECTRICAL CONNECTOR,PLUG) is a hand tool designed to disassemble CONNECTOR, PLUG, ELECTRICAL from a CONNECTOR, RECEPTACLE, ELECTRICAL.
What is a Torque Wrench Adapter Set? 10 Items: A Torque Wrench Adapter Set (ADAPTER SET,TORQUE WRENCH) is tWO or more ADAPTER, TORQUE WRENCH of different sizes.
What is an Electronic Component Inserter And Remover? 79 Items: An Electronic Component Inserter And Remover (INSERTER AND REMOVER,ELECTRONIC COMPONENT) is an item which can insert or remove an electronic component package such as MICROCIRCUIT; RESISTOR, NETWORK (as modified); and the like from its mounting position or socket. Excludes INSERTER AND REMOVER, ELECTRICAL CONTACT; REMOVER, ELECTRICAL CONTACT; EXTRACTOR, ELECTRICAL CARD; EXTRACTOR, ELECTRONIC CRYSTAL UNIT; EXTRACTOR, ELECTRON TUBE.
What is an Impact Type Bit Set And Handle Screwdriver? 14 Items: An Impact Type Bit Set And Handle Screwdriver (SCREWDRIVER,BIT SET AND HANDLE,IMPACT TYPE) is an item consisting of a set of screwdriver bits and a impact driver to accommodate the bits of various types and characteristics. It is designed to transmit a strong rotating movement by the impact of a hammer blowed on the impact driver. It is used to loosen rusted or seized screws. Excludes SCREWDRIVER, BIT SET AND HANDLE.
What is a Hand Vise Jaw? 19 Items: A Hand Vise Jaw (JAW,VISE,HAND) is an item consisting of two opposing parts of a VISE, HAND. The item is moveable and able to open and close. It can hold, grasp or clamp work.
What is a Screwdriver Handle? 28 Items: A Screwdriver Handle (HANDLE,SCREWDRIVER) is an item used to accommodate various types of BIT, SCREWDRIVER. It is designed to rotate a bit that is used for installing or removing screws.
What is a Wire Twister Pliers? 25 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 284 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is a Mechanical Puller Body? 45 Items: A Mechanical Puller Body (BODY,PULLER,MECHANICAL) is an item designed to support and enclose the internal parts of a PULLER,MECHANICAL.
What is a Flat Tip And Cross Tip Screwdriver Set? 39 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is a Socket Wrench Screwdriver Attachment Set? 22 Items: A Socket Wrench Screwdriver Attachment Set (SCREWDRIVER ATTACHMENT SET,SOCKET WRENCH) is a set of screwdriver attachment, socket wrench of different sizes. Items consist of a female square drive on one end to attach to a handle, socket wrench and various screwdriver tip configurations on the opposite end. Excludes SCREWDRIVER ATTACHMENT,SOCKET WRENCH
What is an Oil Filter Wrench? 44 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 430 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Communications Equipment Spring Adjuster? 13 Items: A Communications Equipment Spring Adjuster (ADJUSTER,SPRING,COMMUNICATIONS EQUIPMENT) is a single or double end tool, equipped with slot(s) of various dimensions or with cylindrical rod(s), used for adjusting the springs or spring tensioned parts of electronic equipment.
What is a Rotating Members Aligning Tool? 32 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
What is a Final Drive Assembly Alignment Pin? 41 Items: A Final Drive Assembly Alignment Pin (ALIGNMENT PIN,FINAL DRIVE ASSEMBLY) is a special designed pin used in the assembling of the final drive.
Arm,Handling Tool 77 Items
What is a Splicing Sleeve Compressing Tool? 23 Items: A Splicing Sleeve Compressing Tool (COMPRESSING TOOL,SPLICING SLEEVE) is a hand tool having hinged leverage handles similar to a CUTTER, BOLT or pliers, designed to compress a splicing sleeve when joining the ends of two conductors, or when forming an eye splice in the end of a wire rope. Excludes CRIMPING TOOL, TERMINAL, HAND.
What is a Hand Screw Jack Extension? 14 Items: A Hand Screw Jack Extension (EXTENSION,HAND SCREW JACK) is a length of externally threaded rigid shafting which is the adjustable section of a JACK, SCREW, HAND.
What is a Mechanical Puller Gear Adapter? 21 Items: A Mechanical Puller Gear Adapter (GEAR ADAPTER,PULLER,MECHANICAL) is an adapter that adapts a PULLER,MECHANICAL, to pull a certain gear.
Handle,Hydraulic Jack 18 Items
What is a Female Electrical Contact Resizing Tool? 11 Items: A Female Electrical Contact Resizing Tool (RESIZING TOOL,FEMALE ELECTRICAL CONTACT) is a tool designed to shape to a specific size, female contacts such as those used on electrical connectors, tube sockets, crystal sockets, and pin jacks.
What is a Screwdriver And Socket Wrench Combination? 13 Items: A Screwdriver And Socket Wrench Combination is a hand-tool formed into an integral unit with a socket wrench at one end and a screwdriver bit at the other end. See also SCREWDRIVER AND WRENCH ASSEMBLY.
What is a Hand Hose Fitting Swaging Tool Kit? 11 Items: A Hand Hose Fitting Swaging Tool Kit (SWAGING TOOL KIT,HOSE FITTING,HAND) is a device, hydraulically actuated by hand or power operated pump, consisting of face plate, adapter plate, finger cages, fingers, ram, bushing, and expanding mandrels combined on a single base in various functional arrangements. It is used for swaging the outside diameter of hose assembly fittings, expanding the inside diameter of hose assemblies, and securing the fabrication of hose assemblies. Included are a hand or power operated pump, lubricant, cases, and trays.
What is a Catch Lever Tool? 12 Items: A Catch Lever Tool (LEVER TOOL,CATCH) is a specially designed hand tool which engages the opening and closing lever of a CATCH (as modified) for ease of operation. It is constructed of thin rigid material, usually flat, and one end has an engaging tongue.
What is a Manual Impact Wrench? 11 Items: A Manual Impact Wrench (WRENCH,IMPACT,MANUAL) is a manually operated handheld tool consisting of spring-loaded handle and a power-impact head which delivers a torsional impact from either continuous movement of the handle in one direction, or by a reciprocating action. It is used in tightening and loosening fasteners, such as bolts, nuts, and the like. The item may include sockets, extensions and offset fittings, nut runners, and the like.
What is a Drift? 63 Items: A Drift is an item consisting of a tubular body fitted with replaceable tips. It is designed to insert or remove mechanical components where space is restricted.
What is a Nutdriver? 46 Items: A Nutdriver is a non-powered hand tool with a screwdriver style handle, shaft and formed female hex or square socket at driving end.
What is a Locking Device Removal Tool? 12 Items: A Locking Device Removal Tool (REMOVAL TOOL,LOCKING DEVICE) is a hand tool designed to facilitate the removal of a WASHER, KEY and a LOCKING PLATE, NUT AND BOLT.
What is a Hydraulic Fitting Crimping Tool Head? 26 Items: A Hydraulic Fitting Crimping Tool Head (HEAD,CRIMPING TOOL,HYDRAULIC FITTING) is a component of a crimping tool used to compress fittings on fluid tubes. It consists of a U-shape item, in which, are mounted different sizes of DIE, CRIMPING TOOL for tubes of various diameters.
What is a Torque Screwdriver? 11 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.
What is a Special Purpose Combination Wrench? 13 Items: A Special Purpose Combination Wrench (WRENCH,COMBINATION,SPECIAL PURPOSE) is a tool having a combination of ends and facets. The ends may have open end, box or spanner characteristics. The sides may have features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s). Designed to fit specific items, not sized as standard or metric.
What is a Screwdriver Bit Holder? 56 Items: A Screwdriver Bit Holder (HOLDER,SCREWDRIVER BIT) is an attachment with a socket end for accepting male hexagon shank insert bits and a drive end for adapting to a portable power or hand tool.
What is a Telescoping Pole? 16 Items: A Telescoping Pole (POLE,TELESCOPING) is an item which is designed to be extended or compressed by the sliding of overlapping sections. This item may or may not be able to accommodate an extension.

Stock Items From Supply Class 5120 Page 55 of 110

5120-14-490-2017
Cambreur

144902017
CP0U6103: RNCC: 3 | RNVC: 9
5120AA2009682: RNCC: 6 | RNVC: 9

17 Sep 1997

5120-14-419-2626
Cle D'immobilisatio

144192626
530657: RNCC: 3 | RNVC: 2

16 Oct 1987

5120-14-380-8378
Ensemble Rallonge

143808378
C46005: RNCC: 3 | RNVC: 2

14 Dec 1982

5120-14-282-9197

5120-14-413-5743
Lead Joint Runner

144135743
3271-7X10COLLIERJOINTBICONIQUE: RNCC: 3 | RNVC: 2

17 Dec 1986

5120-14-291-8156
Socket Wrench Socket

142918156
NS.17: RNCC: 3 | RNVC: 2
3148510420905: RNCC: 5 | RNVC: 2
NS17: RNCC: 5 | RNVC: 2
0714 13 08: RNCC: 5 | RNVC: 2
0714 13 19: RNCC: 5 | RNVC: 2
0042090: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-388-0107
Electrical Contact Remover

143880107
R282943: RNCC: 3 | RNVC: 2

12 Oct 1983

5120-14-468-9850
Bearing And Bushing Inserter And Remover

144689850
40N1293025: RNCC: 3 | RNVC: 2

30 Mar 1994

5120-14-526-0283
Spanner Wrench

145260283
51380862: RNCC: 3 | RNVC: 2

28 Jun 2001

5120-14-377-6187
Vise Jaw Caps

143776187
LONG150: RNCC: 3 | RNVC: 2

10 Jun 1982

5120-14-276-3065
Socket Wrench Socket

142763065
K32L: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-333-2725
Open End Wrench

143332725
15172504: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-429-8695
Face Spanner Wrench Socket

144298695
3900457: RNCC: 3 | RNVC: 2

15 Feb 1989

5120-14-277-3076
Bague Mise Place Bi

142773076
13599660P: RNCC: 3 | RNVC: 2
59966: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-249-0652

5120-14-411-0099
Clapet Extracteur

144110099
35169: RNCC: 3 | RNVC: 2

28 Jul 1986

5120-14-446-0575
Butee

144460575
SV1594: RNCC: 3 | RNVC: 2
5000261594: RNCC: 5 | RNVC: 2
SV1594: RNCC: 5 | RNVC: 9

5 Mar 1991

5120-14-247-4511

5120-14-352-2734
Rallonge Depose Sie

143522734
26-170: RNCC: 3 | RNVC: 2

16 Oct 1978

5120-14-444-1393
Flasque Darret

144441393
D12502-040-03: RNCC: 3 | RNVC: 2

18 Dec 1990

5120-14-545-3668
Detent Handling Tool

145453668
4759-9901: RNCC: 3 | RNVC: 2

8 Apr 2005

5120-14-545-4139
Hand Armament Subsystem Carrier

145454139
J600008: RNCC: 3 | RNVC: 2

12 Apr 2005

5120-14-542-1433
Screw Thread Insert Tang Breakoff Tool

145421433
26415000000: RNCC: 3 | RNVC: 2
8050117K00: RNCC: 5 | RNVC: 2

8 Jul 2004

5120-14-490-8987
Boite

144908987
4068 390 000 046: RNCC: 3 | RNVC: 2
F300 0T 000 5282: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-540-0075
Face Spanner Wrench Socket

145400075
9402LOR110: RNCC: 3 | RNVC: 2

25 Feb 2004

5120-14-426-8438
Pliers

144268438
0411-60192: RNCC: 3 | RNVC: 2

23 Sep 1988

5120-14-458-4934
Seal Inserter And Remover

144584934
549085: RNCC: 3 | RNVC: 2

23 Oct 1992

5120-14-353-2259
Offset Screwdriver Set

143532259
CHZ0006: RNCC: 3 | RNVC: 2

8 Dec 1978

5120-14-430-3485
Chemise Extracteur

144303485
RT35540: RNCC: 3 | RNVC: 2

15 Mar 1989

5120-14-241-1534
Cle A Ergots Specia

142411534
0822-78: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-207-4053

5120-14-261-7669

5120-14-299-6471
Rupteur Standard

142996471
35050812: RNCC: 3 | RNVC: 2
35050823: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-239-6351

5120-14-578-6748
Pneumatic Tire Valve Core Inserter And Remover

145786748
1255: RNCC: 3 | RNVC: 2
131521: RNCC: 5 | RNVC: 2
522449: RNCC: 5 | RNVC: 2

18 Dec 2013

5120-14-204-9115

5120-14-523-4175
Open End Wrench

145234175
171-147: RNCC: 3 | RNVC: 2

19 Jan 2001

5120-14-232-9339
Screwdriver Bit

142329339
NO PRIMARY REF14-232-9339: RNCC: 3 | RNVC: 2
91364597: RNCC: 5 | RNVC: 2
0111023G00: RNCC: 5 | RNVC: 9
0025021: RNCC: 5 | RNVC: 9
ET.105: RNCC: 5 | RNVC: 9
ET105: RNCC: 5 | RNVC: 9
ET5: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-514-7320
Cross Tip Screwdriver

145147320
ENFD6568-0X60: RNCC: 3 | RNVC: 2

11 Jun 1999

5120-14-521-2250
Open End Wrench

145212250
008-444-00826-000: RNCC: 3 | RNVC: 2
008-444-00826-000: RNCC: 3 | RNVC: 2
008-444-00826-000: RNCC: 5 | RNVC: 2
008-444-00826-000: RNCC: 5 | RNVC: 2

12 Jul 2000

5120-14-383-6522
Vise Jaw Caps

143836522
S10-0152-0660: RNCC: 3 | RNVC: 2

11 Apr 1983

5120-14-305-6345
Screwdriver Bit

143056345
L-8: RNCC: 3 | RNVC: 2
L8: RNCC: 3 | RNVC: 2
3272670291256: RNCC: 5 | RNVC: 2
85-679-5890: RNCC: 6 | RNVC: 9

1 Jan 1974

5120-14-219-0002
Crochet Pour Ressor

142190002
NO PRIMARY REF14-219-0002: RNCC: 3 | RNVC: 2
22994-2: RNCC: 5 | RNVC: 9
22994-2: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-343-9775
Embout Outil Montag

143439775
0187-034-000: RNCC: 3 | RNVC: 2
85-800-6974: RNCC: 6 | RNVC: 9

13 Jul 1977

5120-14-450-3100
Roulement Coupelle

144503100
30AM131-06: RNCC: 3 | RNVC: 2

25 Sep 1991

5120-14-399-1829
Outil De Positionne

143991829
20181647: RNCC: 3 | RNVC: 2
20181647: RNCC: 5 | RNVC: 9

6 Mar 1985

5120-14-242-0959

5120-14-302-3375

5120-14-225-4010

5120-14-232-9191
Outil Pour Emmanche

142329191
51708: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-364-1580
Spanner Wrench

143641580
19308946: RNCC: 3 | RNVC: 2

7 Aug 1980

5120-14-384-6257
Electrical Card Extractor

143846257
16928985: RNCC: 3 | RNVC: 2
16928985: RNCC: 5 | RNVC: 9

2 Jun 1983

5120-14-343-6355
Canon De Guidage

143436355
330A97-2404-49: RNCC: 3 | RNVC: 2

16 Jun 1977

5120-14-259-2642
Spanner Wrench

142592642
0U12829: RNCC: 3 | RNVC: 2

1 Jan 1969

5120-14-436-0182
Protectr Monte Join

144360182
RT30085: RNCC: 3 | RNVC: 2

29 Nov 1989

5120-14-467-9774
Spanner Wrench

144679774
45215101: RNCC: 3 | RNVC: 2
45215101: RNCC: 5 | RNVC: 9

2 Feb 1994

5120-14-313-7250
Spanner Wrench

143137250
C47175: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-420-6467
A Douille Cle

5120-14-317-5642
Screwdriver Bit

143175642
I480-2: RNCC: 3 | RNVC: 2
XPB102-7: RNCC: 5 | RNVC: 9
1232: RNCC: 5 | RNVC: 9
I480-2: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-337-5391
Secteur De Serrage

143375391
0057360: RNCC: 3 | RNVC: 2
S.200X: RNCC: 5 | RNVC: 2
S200X: RNCC: 5 | RNVC: 2

7 Oct 1976

5120-14-431-7855
Socket Head Screw Key

144317855
0453-6089917: RNCC: 3 | RNVC: 2

10 May 1989

5120-14-242-9082

5120-14-308-2341

5120-14-042-6948
Ouvre Bidons

140426948
0CMV10-521763E: RNCC: 3 | RNVC: 2

20 Jul 1979

5120-14-201-3093
Hand Strainer Removing Hook

142013093
NO PRIMARY REF14-201-3093: RNCC: 3 | RNVC: 2
73: RNCC: 5 | RNVC: 9

1 Jan 1962

5120-14-513-7362
Flat Tip Screwdriver

145137362
ENFD6561-0-8X4X125: RNCC: 3 | RNVC: 2

9 Apr 1999

5120-14-385-9817
Spanner Wrench

143859817
0.411/60108: RNCC: 3 | RNVC: 2
0411-60108: RNCC: 5 | RNVC: 2

24 Aug 1983

5120-14-214-0199

5120-14-287-1640

5120-14-283-1394
Corps Et Serpentin

142831394
T0120BBC13APL2: RNCC: 3 | RNVC: 2
301733T: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-417-1252
Spanner Wrench

144171252
095258R: RNCC: 3 | RNVC: 2

1 Jul 1987

5120-14-367-6084
Spanner Wrench

143676084
0410-14: RNCC: 3 | RNVC: 2

19 Jan 1981

5120-14-421-3521
Spanner Wrench

144213521
540351: RNCC: 3 | RNVC: 2

14 Jan 1988

5120-14-313-7272
Faux Mors

143137272
C47028: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-567-9621
Torque Wrench Adapter

145679621
260467085: RNCC: 3 | RNVC: 2

28 Apr 2011

5120-14-572-3602
Slip Joint Pliers

145723602
181.18TE: RNCC: 3 | RNVC: 2
3148517776296: RNCC: 5 | RNVC: 2
777629: RNCC: 5 | RNVC: 2

27 Jun 2012

5120-14-386-3920
Manutention Outil

143863920
02640910400: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-576-1182
Ratchet Wrench

145761182
467S.13: RNCC: 3 | RNVC: 2
3148518197458: RNCC: 5 | RNVC: 2
819745: RNCC: 5 | RNVC: 2

30 May 2013

5120-14-572-0415
Spatula

145720415
E102980: RNCC: 3 | RNVC: 2
14100086645: RNCC: 5 | RNVC: 2

5 Jun 2012

5120-14-212-0490

5120-14-300-1215
Chasse Axe Et Dent

143001215
7112902: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-391-7800
Module Extracteur

143917800
0UT93: RNCC: 3 | RNVC: 2

21 Mar 1984

5120-14-446-7196
Spanner Wrench

144467196
39211666: RNCC: 3 | RNVC: 2

9 Apr 1991

5120-14-338-9005
Hand-Operated Grommet And Eyelet Press

143389005
8811637000: RNCC: 3 | RNVC: 2

17 Dec 1976

5120-14-437-0682
Open End Wrench

144370682
11159: RNCC: 3 | RNVC: 2

17 Jan 1990

5120-14-360-6469
Spanner Wrench

143606469
8810153001: RNCC: 3 | RNVC: 2

19 Dec 1979

5120-14-538-9479
Slip Joint Pliers

145389479
NGM0051829112263: RNCC: 2 | RNVC: 2

9 Dec 2003

5120-14-538-1981
Solid Center Punch

145381981
NGM0010032532325: RNCC: 2 | RNVC: 2

9 Dec 2003

5120-14-489-7889
Socket Wrench Adapter

144897889
EF.6J: RNCC: 3 | RNVC: 2
3148510229164: RNCC: 5 | RNVC: 2
0022916: RNCC: 5 | RNVC: 9

19 Aug 1997

5120-14-555-5964
Mechanical Puller Attachment

145555964
14431: RNCC: 3 | RNVC: 2

29 Nov 2007

5120-14-346-7482
Electrical Card Extractor

143467482
716251: RNCC: 3 | RNVC: 2

19 Jan 1978

5120-14-427-0917
Speciale Cle

144270917
537562: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-443-0108
Cle

144430108
51981: RNCC: 3 | RNVC: 2

7 Nov 1990

5120-14-495-9837
Retaining Ring Pliers

144959837
380014: RNCC: 3 | RNVC: 2
HITECH1221SRCS18795-2: RNCC: 5 | RNVC: 2
F300 0T 020 6798: RNCC: 6 | RNVC: 9

15 Oct 1997

5120-14-294-9283
Open End Wrench

142949283
13 3-16X1-4: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-264-7904

5120-14-249-6462
Crochet

142496462
PR46735: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-462-5885
Faux Mors

144625885
PR46260: RNCC: 3 | RNVC: 2

28 Apr 1993

5120-14-326-5920

5120-14-557-9171
Socket Wrench Socket

145579171
9402CMP136006: RNCC: 3 | RNVC: 2

30 Jul 2008

5120-14-402-4123
Positionnemen Outil

144024123
MJD440-22: RNCC: 3 | RNVC: 2

3 Jul 1985

5120-14-253-4563
Verin Hydraulique S

142534563
321-97-0001: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-514-0196
Open End Wrench

145140196
ENFD29159-28X29: RNCC: 3 | RNVC: 2

22 Apr 1999

5120-14-361-3084
Socket Wrench Socket

143613084
9970-115-705: RNCC: 3 | RNVC: 2

24 Jan 1980

5120-14-300-9653
Face Spanner Wrench Socket

143009653
341A93-3511-00: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-284-6186
Open End Wrench

142846186
BB87: RNCC: 3 | RNVC: 9

1 Jan 1972

5120-14-558-4511
Adjustable Wrench

145584511
DELT70115: RNCC: 3 | RNVC: 2

3 Oct 2008

5120-14-251-4574

5120-14-490-8704
Meche

144908704
4061 551 130 060: RNCC: 3 | RNVC: 2
F300 0T 000 4944: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-248-5503

5120-14-218-6738

5120-14-436-0253
Preformed Packing Inserter

144360253
RT19854: RNCC: 3 | RNVC: 2

29 Nov 1989

5120-14-505-9380
Preformed Packing Inserter

145059380
H117143: RNCC: 3 | RNVC: 2

30 Mar 1998

5120-14-552-5251
Screwdriver Bit

145525251
EX.227: RNCC: 3 | RNVC: 2
EX.227: RNCC: 5 | RNVC: 2
3148510258331: RNCC: 5 | RNVC: 2

11 Jan 2007

5120-14-421-8228
Socket Wrench Socket

144218228
3215530: RNCC: 3 | RNVC: 2

27 Jan 1988

5120-14-286-2398
Matrice Pour Pince

142862398
46375: RNCC: 3 | RNVC: 2
0-046375-0: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-564-9558
Manual Impact Wrench

145649558
3854352: RNCC: 3 | RNVC: 2

22 Jun 2010

5120-14-278-5028

5120-14-381-6331
Curette Treillis

143816331
21C9541: RNCC: 3 | RNVC: 2

25 Jan 1983

5120-14-031-6918
Faux Mors

140316918
C46345: RNCC: 3 | RNVC: 2

14 Jun 1980

5120-14-415-4717
Montage Outil

144154717
4712: RNCC: 3 | RNVC: 2

18 May 1987

5120-14-490-8871
Boutero

144908871
4067 050 001 245: RNCC: 3 | RNVC: 2
F300 0T 000 5143: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-417-8247
Screwdriver Bit

144178247
BND2-25-5: RNCC: 3 | RNVC: 2
91598551: RNCC: 5 | RNVC: 2

29 Jul 1987

5120-14-514-0083
Open End Wrench

145140083
ENFD29159-10X13: RNCC: 3 | RNVC: 2

22 Apr 1999

5120-14-422-2387
Socket Head Screw Key

144222387
0372-42-10085: RNCC: 3 | RNVC: 2

24 Feb 1988

5120-14-271-6079
Open End Wrench

142716079
E74301C6WWF: RNCC: 2 | RNVC: 1

1 Jan 1970

5120-14-488-8732
Torque Wrench Adapter

144888732
SDO.7: RNCC: 3 | RNVC: 2
SD0-7: RNCC: 5 | RNVC: 2

11 Jun 1997

5120-14-396-1786
Ecrou Blocage Cle

143961786
0439-200700: RNCC: 3 | RNVC: 2
O439-200700: RNCC: 5 | RNVC: 2

27 Nov 1984

5120-14-223-9382
Coquille Glisse-Joi

142239382
4268: RNCC: 3 | RNVC: 2
0U4268: RNCC: 5 | RNVC: 2
880-95-0-001: RNCC: 5 | RNVC: 2

1 Jan 1966

5120-14-391-5738
Sertissage Montage

143915738
NO PRIMARY REF14-391-5738: RNCC: 3 | RNVC: 2
BL44740: RNCC: 5 | RNVC: 9

21 Mar 1984

5120-14-348-4423
Spanner Wrench

143484423
GSM084-008F8: RNCC: 3 | RNVC: 2
GSM084-08F8: RNCC: 5 | RNVC: 2

29 Mar 1978

5120-14-281-2910
Cale De Presse Mont

142812910
A0100844: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-541-1616
Carpenters' Pincers

145411616
6362180010: RNCC: 3 | RNVC: 2
3303806362073: RNCC: 5 | RNVC: 2

14 May 2004

5120-14-515-1934
Plug Electrical Connector Extractor

145151934
B480C23: RNCC: 3 | RNVC: 2
91722123: RNCC: 5 | RNVC: 2

13 Jul 1999

5120-14-399-9484
Socket Head Screw Key

143999484
601521: RNCC: 3 | RNVC: 2

24 Apr 1985

5120-14-229-5411
Spanner Wrench

142295411
4409768: RNCC: 3 | RNVC: 2
4409768: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-424-5615
Socket Wrench Adapter

144245615
0980166: RNCC: 3 | RNVC: 2
SP.1743: RNCC: 5 | RNVC: 2
SP1743: RNCC: 5 | RNVC: 2

28 May 1988

5120-14-461-2658
Hand Storage Battery Carrier

144612658
305: RNCC: 3 | RNVC: 9

3 Mar 1993

5120-14-457-4370
Bearing And Bushing Inserter And Remover

144574370
45057875: RNCC: 3 | RNVC: 2
45057875: RNCC: 5 | RNVC: 9

3 Sep 1992

5120-14-218-6724

5120-14-288-1567

5120-14-484-7577
Screwdriver Bit

144847577
ES.128T: RNCC: 3 | RNVC: 2
3148510249841: RNCC: 5 | RNVC: 2
ES128T: RNCC: 5 | RNVC: 2
ES.128T: RNCC: 5 | RNVC: 2
0024984: RNCC: 5 | RNVC: 9

5 Dec 1996

5120-14-357-4336
Ring Retaining Pliers Tip Set

143574336
470.E6: RNCC: 3 | RNVC: 2
3148511779002: RNCC: 5 | RNVC: 2
470E6: RNCC: 5 | RNVC: 2
91374047: RNCC: 5 | RNVC: 2
0177900: RNCC: 5 | RNVC: 9

7 Jun 1979

5120-14-544-7132
Fuel Injection Nozzle Extractor

145447132
330030627: RNCC: 3 | RNVC: 2

17 Feb 2005

5120-14-295-7962
Spanner Wrench

142957962
T0120BBH1A: RNCC: 3 | RNVC: 2
T0121BBH1A: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-433-1405
Bearing And Bushing Inserter And Remover

144331405
45153239: RNCC: 3 | RNVC: 2

11 Jul 1989

5120-14-469-1887
Support Pr Culasse

144691887
DLP755310: RNCC: 3 | RNVC: 2
RAB3221: RNCC: 5 | RNVC: 2

13 Apr 1994

5120-14-232-9247
Tas Pour Joint Meta

142329247
78531: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-352-7186
Cambreur De Ressort

143527186
910960: RNCC: 3 | RNVC: 2

14 Nov 1978

5120-14-409-0573
Gabarit De Calage

144090573
72517: RNCC: 3 | RNVC: 2

16 Apr 1986

5120-14-320-2511
Spanner Wrench

143202511
454711: RNCC: 3 | RNVC: 2
45711: RNCC: 3 | RNVC: 2
4711: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-270-9326

5120-14-232-2688

5120-14-514-9529
Socket Wrench Socket

145149529
26145006107: RNCC: 3 | RNVC: 2

23 Jun 1999

5120-14-424-1251
Socket Wrench Socket

144241251
NS.12L: RNCC: 3 | RNVC: 2
NS12L: RNCC: 5 | RNVC: 2
3148510428406: RNCC: 5 | RNVC: 2
0042840: RNCC: 5 | RNVC: 9

17 May 1988

5120-14-420-0404
Socket Head Screw Key

144200404
BJM00762: RNCC: 3 | RNVC: 2

18 Nov 1987

5120-14-502-6317
Spanner Wrench

145026317
611397770: RNCC: 3 | RNVC: 2

17 Dec 1997

5120-14-503-0935
Mechanical Puller Attachment

145030935
015022020000: RNCC: 3 | RNVC: 2

7 Jan 1998

5120-14-415-1127
Electrical Contact Inserter

144151127
547993: RNCC: 3 | RNVC: 2

1 Apr 1987

5120-14-391-2072
Socket Wrench Socket

143912072
M95: RNCC: 3 | RNVC: 2
3148510319889: RNCC: 5 | RNVC: 2

1 Mar 1984

5120-14-483-7924
Spanner Wrench

144837924
760200: RNCC: 3 | RNVC: 2

3 Oct 1996

5120-14-459-1586
Bearing And Bushing Remover

144591586
45056056: RNCC: 3 | RNVC: 2
45056056: RNCC: 5 | RNVC: 9

19 Nov 1992

5120-14-283-1443
Spanner Wrench

142831443
T0120BBC5APL2: RNCC: 3 | RNVC: 2
403655T: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-252-2760
Face Spanner Wrench Socket

142522760
PR46072: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-239-2068
Body And Fender Spoon

142392068
M0B328: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-552-6134
Socket Wrench Screwdriver Attachment

145526134
RT.6AVSE: RNCC: 3 | RNVC: 2
RT.6AVSE: RNCC: 5 | RNVC: 2
3148510533551: RNCC: 5 | RNVC: 2

18 Jan 2007

5120-14-404-8326
Electrical Contact Remover

144048326
282892: RNCC: 3 | RNVC: 2

20 Nov 1985

5120-14-318-6226
Face Spanner Wrench Socket

143186226
C46301: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-431-9788
Bearing And Bushing Inserter And Remover

144319788
00530672: RNCC: 3 | RNVC: 2
530672: RNCC: 5 | RNVC: 2

18 May 1989

5120-14-510-6880
Pliers

145106880
PB.MODPR1: RNCC: 3 | RNVC: 2

4 Nov 1998

5120-14-548-2141
Verin Cale

145482141
83320: RNCC: 3 | RNVC: 2

14 Dec 2005

5120-14-383-9875
Open End Wrench

143839875
101353: RNCC: 3 | RNVC: 2
P030472: RNCC: 5 | RNVC: 2

4 May 1983

5120-14-436-0244
Extractr Tige Liais

144360244
815706: RNCC: 3 | RNVC: 2

29 Nov 1989

5120-14-434-3639
Cle Speciale

144343639
45152342: RNCC: 3 | RNVC: 2

20 Sep 1989

5120-14-236-2813

5120-14-567-0468
Socket Wrench Socket

145670468
NM.65A: RNCC: 3 | RNVC: 2
0656190: RNCC: 5 | RNVC: 2
656190: RNCC: 5 | RNVC: 2

2 Feb 2011

5120-14-248-5505

5120-14-259-8053
Cle Reglage Dassiet

142598053
70726813: RNCC: 3 | RNVC: 2
70726813: RNCC: 5 | RNVC: 9
BE131530: RNCC: 5 | RNVC: 9

1 Jan 1969

5120-14-245-1806

5120-14-272-3722

5120-14-237-9467

5120-14-460-5417
Bearing Staking Installation Tool

144605417
NO PRIMARY REF14-460-5417: RNCC: 3 | RNVC: 2
BLB124: RNCC: 5 | RNVC: 9
85-694-5627: RNCC: 6 | RNVC: 9

27 Jan 1993

5120-14-363-5128
Socket Wrench Handle Bar

143635128
NO PRIMARY REF14-363-5128: RNCC: 3 | RNVC: 2
75214: RNCC: 5 | RNVC: 9
85-598-3991: RNCC: 6 | RNVC: 9

9 May 1980

5120-14-396-4128
Empilage Outil

143964128
6274-51019: RNCC: 3 | RNVC: 2
6274-2600120: RNCC: 5 | RNVC: 2

27 Nov 1984

5120-14-436-0276
Preformed Packing Inserter

144360276
RT30536: RNCC: 3 | RNVC: 2
161821: RNCC: 5 | RNVC: 9

29 Nov 1989

5120-14-383-2802
Spanner Wrench

143832802
12549652-26: RNCC: 3 | RNVC: 2

11 Apr 1983

5120-14-491-0151
Cle

144910151
4602 007 200 111: RNCC: 3 | RNVC: 2
F300 0T 001 0937: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-262-2895

5120-14-228-5130

5120-14-418-5973
Open End Wrench

144185973
NFE74-302-7304: RNCC: 2 | RNVC: 2

2 Sep 1987

5120-14-201-6942
Craftsman's Tweezers

142016942
4300: RNCC: 3 | RNVC: 2
15BF12: RNCC: 3 | RNVC: 2
2095-12: RNCC: 5 | RNVC: 9

1 Jan 1962

5120-14-340-8223
Spanner Wrench

143408223
57175DETB: RNCC: 3 | RNVC: 9
GSM475-049F4: RNCC: 5 | RNVC: 2

14 Feb 1977

5120-14-383-6518
Vise Jaw Caps

143836518
S10-0150-0441: RNCC: 3 | RNVC: 2

11 Apr 1983

5120-14-222-7154
Open End Wrench

142227154
33-26X27: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-412-3289
Socket Wrench Crowfoot Attachment

144123289
F4749SQ5-00-03-40: RNCC: 3 | RNVC: 2

8 Oct 1986

5120-14-224-9879

5120-14-552-8571
Spanner Wrench

145528571
HERFERU7: RNCC: 3 | RNVC: 2

8 Feb 2007

5120-14-532-0727
Socket Wrench Socket

145320727
47242085: RNCC: 3 | RNVC: 2

9 Oct 2002

5120-14-280-4161
Spanner Wrench

142804161
A121871: RNCC: 3 | RNVC: 2
100056: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-420-9665
Electrical Contact Inserter

144209665
69421: RNCC: 3 | RNVC: 2

6 Jan 1988

5120-14-541-6489
Outil

145416489
0099374: RNCC: 3 | RNVC: 2

17 Jun 2004

5120-14-559-2248
Cross Tip Screwdriver

145592248
7421045671: RNCC: 3 | RNVC: 2

15 Dec 2008

5120-14-571-2259
Crimping Tool Die

145712259
985919: RNCC: 3 | RNVC: 2
FACOM 985919: RNCC: 5 | RNVC: 2

1 Mar 2012

5120-14-252-3033

5120-14-236-2436

5120-14-375-8011
Immob Bride Equerre

143758011
300A99201: RNCC: 3 | RNVC: 2
91369759: RNCC: 5 | RNVC: 2
300A99201: RNCC: 5 | RNVC: 2
300A99201: RNCC: 5 | RNVC: 9
300A99201: RNCC: 5 | RNVC: 9

30 Mar 1982

5120-14-389-9588
Electrical Card Extractor

143899588
499198: RNCC: 3 | RNVC: 2
91475524: RNCC: 3 | RNVC: 2
91475524: RNCC: 5 | RNVC: 2
91475524: RNCC: 5 | RNVC: 9

26 Jan 1984

5120-14-287-1643
Flat Tip Screwdriver

142871643
ENFD5234E12X400: RNCC: 3 | RNVC: 2
2109: RNCC: 5 | RNVC: 2
230-400: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-281-1906
Spanner Wrench

142811906
4643: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-486-2191
Retaining Ring Pliers

144862191
197E.13: RNCC: 3 | RNVC: 2
3148511456866: RNCC: 5 | RNVC: 2
91797781: RNCC: 5 | RNVC: 2
0145686: RNCC: 5 | RNVC: 2
197E13: RNCC: 5 | RNVC: 9

5 Mar 1997

5120-14-556-8845
Hand Hydraulic Jack

145568845
BOITE DE CRIC CVM 1000: RNCC: 3 | RNVC: 2

17 Apr 2008

5120-14-406-9989
Mechanical Puller Step Plate

144069989
780BELOG2-3K: RNCC: 3 | RNVC: 2

24 Jan 1986

5120-14-425-5794
Basculeur Cle Dynam

144255794
0747153: RNCC: 3 | RNVC: 2
SP1735D-3-1000: RNCC: 5 | RNVC: 2

9 Jul 1988

5120-14-563-3700
Mechanical Puller

145633700
PA4-200SMDS03-09P3/7: RNCC: 3 | RNVC: 2

2 Feb 2010

5120-14-493-0051
Cle

144930051
4065 030 000 775: RNCC: 3 | RNVC: 2
F300 0T 009 4395: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-208-7290

5120-14-286-7130

5120-14-208-6381

5120-14-437-0675
Open End Wrench

144370675
11152: RNCC: 3 | RNVC: 2

17 Jan 1990

5120-14-462-7124
Socket Wrench Socket

144627124
SBE551: RNCC: 3 | RNVC: 2

28 Apr 1993

5120-14-323-3137

5120-14-262-2186

5120-14-564-1441
Seal Inserter

145641441
430822: RNCC: 3 | RNVC: 2

12 Apr 2010

5120-14-338-4768
Faux Mor Demi-Coqui

143384768
C46317-1: RNCC: 3 | RNVC: 2

6 Nov 1976

5120-14-490-1581
Precision Work Separator

144901581
835.1: RNCC: 3 | RNVC: 2
835-1: RNCC: 5 | RNVC: 2
3148512068501: RNCC: 5 | RNVC: 2
0206850: RNCC: 5 | RNVC: 9
F300 0T 025 0524: RNCC: 6 | RNVC: 9

17 Sep 1997

5120-14-338-4792
Cle A Ergots Corps

143384792
C46307-1: RNCC: 3 | RNVC: 2

6 Nov 1976

5120-14-410-2358
Screwdriver Handle

144102358
30315: RNCC: 3 | RNVC: 2
31315: RNCC: 5 | RNVC: 2
31315: RNCC: 5 | RNVC: 2
50: RNCC: 5 | RNVC: 2
91675420: RNCC: 5 | RNVC: 2
0178653T00: RNCC: 5 | RNVC: 2
30315: RNCC: 5 | RNVC: 2
91598495: RNCC: 5 | RNVC: 2

18 Jun 1986

5120-14-408-8679
Hand Terminal Crimping Tool

144088679
451: RNCC: 3 | RNVC: 2

2 Apr 1986

5120-14-424-9479
Hand Blind Riveter

144249479
46AM113A: RNCC: 3 | RNVC: 2

15 Jun 1988

5120-14-519-7812
Socket Wrench Socket Set

145197812
RS.430E: RNCC: 3 | RNVC: 2

5 Apr 2000

5120-14-433-1394
Bearing And Bushing Inserter And Remover Set

144331394
39271404: RNCC: 3 | RNVC: 2

11 Jul 1989

5120-14-539-2582
Mechanical Puller Body

145392582
T623G3003801: RNCC: 3 | RNVC: 2

17 Dec 2003

5120-14-490-0613
Flat Tip Screwdriver

144900613
AY.12X250VE: RNCC: 3 | RNVC: 2
0012866: RNCC: 5 | RNVC: 2
3148510130590: RNCC: 5 | RNVC: 2
AY.12X250VSE: RNCC: 5 | RNVC: 9
3148510128665: RNCC: 5 | RNVC: 9

10 Sep 1997

5120-14-539-2717
Screwdriver Bit Holder

145392717
EF.6P5: RNCC: 3 | RNVC: 2
3148510229225: RNCC: 5 | RNVC: 2
EF.6P5: RNCC: 5 | RNVC: 2

17 Dec 2003

5120-14-552-7203
Socket Head Screw Key Set

145527203
83SH.JPA: RNCC: 3 | RNVC: 2
3148511229538: RNCC: 5 | RNVC: 2
83SH.JPA: RNCC: 5 | RNVC: 2

25 Jan 2007

5120-14-438-2580
Screwdriver Bit

144382580
0023937: RNCC: 3 | RNVC: 2
ENT.206: RNCC: 5 | RNVC: 2

12 Mar 1990

5120-14-350-7484
Open End Wrench

143507484
PR46664: RNCC: 3 | RNVC: 2

12 Jul 1978

5120-14-558-3930
Socket Head Screw Key

145583930
89R.25: RNCC: 3 | RNVC: 2

30 Sep 2008

5120-14-428-5282
Support Embase

144285282
MJN3462402: RNCC: 3 | RNVC: 2

8 Dec 1988

5120-14-255-9436
Cle Pour Pompe

142559436
230049: RNCC: 3 | RNVC: 2

1 Jan 1969

5120-14-396-1840
Ecrou Lame Cle

143961840
0441M0FA40G223: RNCC: 3 | RNVC: 2

27 Nov 1984

5120-14-228-0786

5120-14-343-8366

5120-14-574-1791
Box Wrench

145741791
1-13-322: RNCC: 3 | RNVC: 2
E113322: RNCC: 5 | RNVC: 9

13 Dec 2012

5120-14-273-6015
Spanner Wrench

142736015
50053: RNCC: 3 | RNVC: 2
0U50053: RNCC: 5 | RNVC: 2
7M328: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-427-7221
Spanner Wrench

144277221
33198: RNCC: 3 | RNVC: 2

8 Nov 1988

5120-14-316-1617
Mandrin Emmenc Roul

143161617
A128128: RNCC: 3 | RNVC: 2
100227: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-569-6410
Piston Inserter

145696410
M14100: RNCC: 3 | RNVC: 2

7 Oct 2011

5120-14-449-7325
Cle Speciale

144497325
45594882: RNCC: 3 | RNVC: 2
45594882: RNCC: 5 | RNVC: 9

4 Sep 1991

5120-14-504-0174
Spanner Wrench

145040174
64386: RNCC: 3 | RNVC: 2

4 Feb 1998

5120-14-395-1874

5120-14-371-4241
Spanner Wrench

143714241
6254-57011: RNCC: 3 | RNVC: 2

5 Aug 1981

5120-14-513-7392
Flat Tip Screwdriver

145137392
ENFD6560-1-2X8X175: RNCC: 3 | RNVC: 2

9 Apr 1999

5120-14-329-6387
Spanner Wrench

143296387
MHG101-21: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-405-3051
Spanner Wrench

144053051
12-520-105: RNCC: 3 | RNVC: 9

27 Nov 1985

5120-14-392-0886
Torque Wrench Adapter

143920886
853-100-108-0: RNCC: 3 | RNVC: 2

21 Mar 1984

5120-14-449-5755
Piston Ring Expander

144495755
24145900100: RNCC: 3 | RNVC: 2
318639-00: RNCC: 5 | RNVC: 2

27 Aug 1991

5120-14-245-3271
Electrical Contact Remover

142453271
8201-31: RNCC: 3 | RNVC: 2
91557008: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-315-5996
Swivel Knob Jeweler's Screwdriver

143155996
0011000: RNCC: 3 | RNVC: 2
ARE.2,5X23: RNCC: 5 | RNVC: 2
ARE2-5X23: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-292-0795
Outillage Culbuteur

142920795
NO PRIMARY REF14-292-0795: RNCC: 3 | RNVC: 2
AB85ET23A25: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-495-2659
Cle

144952659
NO PRIMARY REF14-495-2659: RNCC: 3 | RNVC: 2
92 86 76: RNCC: 5 | RNVC: 9
F300 0T 018 8960: RNCC: 6 | RNVC: 9

15 Oct 1997

5120-14-451-0469
Retouche Embout Sph

144510469
04640915800: RNCC: 3 | RNVC: 2
314959-01: RNCC: 5 | RNVC: 2
59539849: RNCC: 5 | RNVC: 2

28 Oct 1991

5120-14-271-5234
Bloc De Pre-Sertiss

142715234
RPS5F16X1K: RNCC: 3 | RNVC: 2
RPS4F14-16K: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-427-2175
Extracteur Etrier

144272175
46AM097-01: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-394-4967
Bloc De Sertissage

143944967
RMPS8F18X2M: RNCC: 3 | RNVC: 2
RHPS8F18X2M: RNCC: 5 | RNVC: 2

28 Aug 1984

5120-14-490-8909
Lime

144908909
4067 210 000 526: RNCC: 3 | RNVC: 2
F300 0T 000 5183: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-368-2071
Spanner Wrench

143682071
95PAA: RNCC: 3 | RNVC: 2

20 Feb 1981

5120-14-411-8731
Mechanical Puller Gear Adapter

144118731
396D1: RNCC: 3 | RNVC: 2

10 Sep 1986

5120-14-449-1524
Spring Inserter And Remover

144491524
45056050: RNCC: 3 | RNVC: 2
45056050: RNCC: 5 | RNVC: 9

31 Jul 1991

5120-14-320-0253
Spanner Wrench

143200253
3CGF199: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-478-3317
Screwdriver Bit

144783317
1100480A00: RNCC: 3 | RNVC: 2

25 Oct 1995

5120-14-437-9665
Hand Tube Flaring Punch

144379665
P1E: RNCC: 3 | RNVC: 2
P1E: RNCC: 3 | RNVC: 9

28 Feb 1990

5120-14-506-0611
Socket Head Screw Key

145060611
84T5: RNCC: 3 | RNVC: 2

2 Apr 1998

5120-14-380-8370
Spanner Wrench

143808370
C46148: RNCC: 3 | RNVC: 2

14 Dec 1982

5120-14-436-0184
Outil Serrage Filtr

144360184
RT30264: RNCC: 3 | RNVC: 2

29 Nov 1989

5120-14-474-3984
Jeu D'accessoires

144743984
1687000084: RNCC: 3 | RNVC: 2
RAB3619: RNCC: 5 | RNVC: 2

15 Feb 1995

5120-14-297-4256

5120-14-523-9515
Cross Tip Screwdriver

145239515
46007984: RNCC: 3 | RNVC: 2
8031241X00: RNCC: 5 | RNVC: 2

14 Feb 2001

5120-14-224-7471
Flat Tip Screwdriver

142247471
204: RNCC: 3 | RNVC: 2
7454: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-352-8266
Veri Course Outilla

143528266
D46559: RNCC: 3 | RNVC: 2

14 Nov 1978

5120-14-509-9190
Outil D'installatio

145099190
L0GICCLIPDIL: RNCC: 3 | RNVC: 2
5120AA1105814: RNCC: 6 | RNVC: 9

4 Nov 1998

5120-14-490-8782
Tournev

144908782
4065 200 000 425: RNCC: 3 | RNVC: 2
F300 0T 000 5045: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-473-0624
Screwdriver Bit

144730624
EH.103: RNCC: 3 | RNVC: 2
EH103: RNCC: 5 | RNVC: 2
0111021E00: RNCC: 5 | RNVC: 2
91759697: RNCC: 5 | RNVC: 2
3148510233697: RNCC: 5 | RNVC: 2
0023369: RNCC: 5 | RNVC: 9

7 Dec 1994

5120-14-430-0865
Spanner Wrench

144300865
6814-70642: RNCC: 3 | RNVC: 2

1 Mar 1989

5120-14-511-1074
Sheet Metalworking Dolly Block

145111074
2851006: RNCC: 3 | RNVC: 2

2 Dec 1998

5120-14-539-2624
Mechanical Puller Body

145392624
T632G3006221: RNCC: 3 | RNVC: 2

17 Dec 2003

5120-14-450-2350
Torque Wrench Multiplier

144502350
8815394000: RNCC: 3 | RNVC: 2
89414992: RNCC: 5 | RNVC: 2

25 Sep 1991

5120-14-458-4920
Seal Inserter And Remover

144584920
548351: RNCC: 3 | RNVC: 2

23 Oct 1992

5120-14-454-0081
Spanner Wrench

144540081
OUT60399: RNCC: 3 | RNVC: 2
0UT60399: RNCC: 5 | RNVC: 2

19 Mar 1992

5120-14-236-8766
Spanner Wrench

142368766
0672-78: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-537-3059
Handling Tool Arm

145373059
7M911: RNCC: 3 | RNVC: 2
6801FDD: RNCC: 3 | RNVC: 2

17 Oct 2003

5120-14-229-8555
Spanner Wrench

142298555
723280: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-548-9355
Open End Wrench

145489355
45126738: RNCC: 3 | RNVC: 2

23 Feb 2006

5120-14-539-3117
Mechanical Puller Body

145393117
T633G3001801: RNCC: 3 | RNVC: 2

22 Dec 2003

5120-14-443-4156
Pin Inserter And Remover

144434156
MEH134: RNCC: 3 | RNVC: 2
89231085: RNCC: 5 | RNVC: 2
89280436: RNCC: 5 | RNVC: 2

22 Nov 1990

5120-14-410-4802
Socket Wrench Socket

144104802
422480: RNCC: 3 | RNVC: 2
422480: RNCC: 5 | RNVC: 9

2 Jul 1986

5120-14-405-2253
Electrical Card Extractor

144052253
1900210000: RNCC: 3 | RNVC: 2

27 Nov 1985

5120-14-529-2063
Spanner Wrench

145292063
A103048: RNCC: 3 | RNVC: 2

18 Mar 2002

5120-14-551-0116
Socket Wrench Adapter

145510116
F47121: RNCC: 3 | RNVC: 2

21 Aug 2006

5120-14-551-0178
Vise Jaw Caps

145510178
F46822: RNCC: 3 | RNVC: 2

21 Aug 2006

5120-14-552-8291
Socket Head Screw Key

145528291
83H.11: RNCC: 3 | RNVC: 2
83H.11: RNCC: 5 | RNVC: 2
3148511241110: RNCC: 5 | RNVC: 2

6 Feb 2007

5120-14-487-0521
Open End Wrench

144870521
M15920: RNCC: 3 | RNVC: 2

2 Apr 1997

5120-14-540-4516
Open End Wrench

145404516
102100-26: RNCC: 3 | RNVC: 9

30 Mar 2004

5120-14-292-1724
Hole Sheet Metal Holder

142921724
052011.000: RNCC: 3 | RNVC: 9
054504.000: RNCC: 3 | RNVC: 9
052011: RNCC: 5 | RNVC: 9
054504: RNCC: 5 | RNVC: 9
52011: RNCC: 5 | RNVC: 9
54504: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-390-6073
Vanne Diaphragme

143906073
SERIE450-453-CB: RNCC: 3 | RNVC: 2

26 Jan 1984

5120-14-459-2596
Emmanchement Outil

144592596
MMG047-72: RNCC: 3 | RNVC: 2
MMG047-72: RNCC: 5 | RNVC: 2

19 Nov 1992

5120-14-366-8475
De Centrage Obus

143668475
30MS089-0000003: RNCC: 3 | RNVC: 2

20 Nov 1980

5120-14-396-1846
Ecrou Hublot Cle

143961846
0441M0FA407222: RNCC: 3 | RNVC: 2

27 Nov 1984

5120-14-424-5276
Spanner Wrench

144245276
7M491: RNCC: 3 | RNVC: 2

26 May 1988

5120-14-313-7253
Spanner Wrench

143137253
C47179: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-556-8766
Hand Armament Subsystem Carrier

145568766
498951: RNCC: 3 | RNVC: 2

17 Apr 2008

5120-14-506-7667
De Montage Outil

145067667
M13470: RNCC: 3 | RNVC: 2

14 May 1998

5120-14-490-8879
Etampe

144908879
4067 150 001 202: RNCC: 3 | RNVC: 2
F300 0T 000 5151: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-240-0227

5120-14-524-7735
Screwdriver Bit

145247735
AMZ.H3: RNCC: 3 | RNVC: 2
3148510087313: RNCC: 5 | RNVC: 2
8031349P00: RNCC: 5 | RNVC: 2
56146265: RNCC: 5 | RNVC: 2
0008731: RNCC: 5 | RNVC: 9

11 Apr 2001

5120-14-436-0275
Preformed Packing Inserter

144360275
RT30444: RNCC: 3 | RNVC: 2

29 Nov 1989

5120-14-473-7485
Electronic Component Inserter And Remover

144737485
45216009: RNCC: 3 | RNVC: 2
45216009: RNCC: 5 | RNVC: 9

11 Jan 1995

5120-14-321-3487

5120-14-345-3204

5120-14-386-9742
Verin Pr Amortisseu

143869742
26545911500: RNCC: 3 | RNVC: 2
265459115: RNCC: 5 | RNVC: 9

24 Aug 1983

5120-14-285-6327

5120-14-531-7515
Screwdriver Bit

145317515
ETORM.104: RNCC: 3 | RNVC: 2

13 Sep 2002

5120-14-475-5575
Hand Armament Subsystem Carrier

144755575
0787360A00: RNCC: 3 | RNVC: 2

18 Apr 1995

5120-14-263-5405
Spanner Wrench

142635405
R110120: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-570-3182
Hand Screw Jack

145703182
FAT71 343 11 P MARGOT 5000: RNCC: 3 | RNVC: 2

7 Dec 2011

5120-14-392-6328
Socket Head Screw Key

143926328
479314T: RNCC: 3 | RNVC: 2

7 Apr 1984

5120-14-548-0530
Mechanical Puller Set

145480530
5000262740: RNCC: 3 | RNVC: 2

7 Dec 2005

5120-14-523-8260
Mattock

145238260
054080: RNCC: 3 | RNVC: 2

5 Feb 2001

5120-14-318-6224
Face Spanner Wrench Socket

143186224
C46358: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-425-5979
Flat Tip Screwdriver

144255979
AG.8X150: RNCC: 3 | RNVC: 2
3148510057217: RNCC: 5 | RNVC: 2
91633926: RNCC: 5 | RNVC: 2
0005721: RNCC: 5 | RNVC: 9

12 Jul 1988

5120-14-523-8204
Hand Terminal Crimping Tool

145238204
FACOM450: RNCC: 3 | RNVC: 2

2 Feb 2001

5120-14-543-2004
Screw Push-Pull Jack

145432004
518452: RNCC: 3 | RNVC: 2

31 Aug 2004

5120-14-395-0567
Spanner Wrench

143950567
8814132000: RNCC: 3 | RNVC: 2

2 Oct 1984

5120-14-546-8847
Pliers

145468847
195.16CPE: RNCC: 3 | RNVC: 2

1 Sep 2005

5120-14-398-1044
Electron Tube Extractor

143981044
16796986: RNCC: 3 | RNVC: 9

31 Jan 1985

5120-14-527-8633
Open End Wrench

145278633
E2C001230000113: RNCC: 3 | RNVC: 2

28 Nov 2001

5120-14-422-1279
Spanner Wrench

144221279
3928.982: RNCC: 3 | RNVC: 2
3928982: RNCC: 3 | RNVC: 2

24 Feb 1988

5120-14-407-3881
Spanner Wrench

144073881
36788: RNCC: 3 | RNVC: 2

12 Feb 1986

5120-14-445-7068
Torque Wrench Adapter

144457068
11.15/16: RNCC: 3 | RNVC: 2
3148510928104: RNCC: 5 | RNVC: 2
0092810: RNCC: 5 | RNVC: 9

22 Feb 1991

5120-14-506-0604
Stakeholder Bench Plate

145060604
CKS16: RNCC: 3 | RNVC: 2
CKS.16A: RNCC: 5 | RNVC: 2
SYQ2054: RNCC: 5 | RNVC: 2

2 Apr 1998

5120-14-424-5274
Spanner Wrench

144245274
7M490: RNCC: 3 | RNVC: 2

26 May 1988

5120-14-429-1532
Tap And Reamer Wrench

144291532
548945: RNCC: 3 | RNVC: 2

11 Jan 1989

5120-14-514-2990
Spanner Wrench

145142990
0UT54: RNCC: 3 | RNVC: 2
OUT54: RNCC: 5 | RNVC: 2

7 May 1999

5120-14-356-6005
Spanner Wrench

143566005
D47569: RNCC: 3 | RNVC: 2

15 May 1979

5120-14-267-1637

5120-14-491-0078
Poire

144910078
4602 001 000 004: RNCC: 3 | RNVC: 2
F300 0T 001 0852: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-421-3473
Crochet De Montage

144213473
537554: RNCC: 3 | RNVC: 2

14 Jan 1988

5120-14-322-5427

5120-14-260-2704

5120-14-389-6688
Plaque De Repoussag

143896688
41099327: RNCC: 3 | RNVC: 2

20 Dec 1983

5120-14-224-4097

5120-14-486-5714
Cle

144865714
RT22437: RNCC: 3 | RNVC: 2

25 Mar 1997

5120-14-235-6961
Spanner Wrench

142356961
30455: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-274-8545
Open End Wrench

142748545
E74301C42UJW: RNCC: 2 | RNVC: 2

1 Jan 1971

5120-14-311-2980
Axe Traction Equipe

143112980
0350-934: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-244-6541

5120-14-360-9427

5120-14-382-9508
Extracteur Bride

143829508
1305: RNCC: 3 | RNVC: 2
SV1231: RNCC: 3 | RNVC: 2
5000261049: RNCC: 5 | RNVC: 2
5000261305: RNCC: 5 | RNVC: 2
5000261049: RNCC: 5 | RNVC: 9
5000261305: RNCC: 5 | RNVC: 9
SV1231: RNCC: 5 | RNVC: 9

17 Mar 1983

5120-14-317-0468
Pose Garniture Pref

143170468
RT5811: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-258-5979

5120-14-391-6949
Outil Insert Coude

143916949
8500-93B: RNCC: 3 | RNVC: 2

21 Mar 1984

5120-14-266-6999

5120-14-459-0722
Adapteur

144590722
DLP757410: RNCC: 3 | RNVC: 2
5016AT2: RNCC: 5 | RNVC: 2

18 Nov 1992

5120-14-385-8416

5120-14-320-5439
Guide Lateral Droit

143205439
001282005P: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-441-1987
Terminal Crimping Tool Contact Positioner

144411987
R073015003: RNCC: 3 | RNVC: 2
91711046: RNCC: 5 | RNVC: 2
73015003: RNCC: 5 | RNVC: 9

22 Aug 1990

5120-14-383-4664
Electrical Card Extractor

143834664
20198006: RNCC: 3 | RNVC: 2
20198006: RNCC: 5 | RNVC: 9

11 Apr 1983

5120-14-410-3832
Spanner Wrench

144103832
15737-505: RNCC: 3 | RNVC: 2

18 Jun 1986

5120-14-508-8629
Pliers

145088629
12507197: RNCC: 3 | RNVC: 2
12507197: RNCC: 3 | RNVC: 9

30 Sep 1998

5120-14-486-1298
Screwdriver Bit

144861298
ENH.312: RNCC: 3 | RNVC: 2
3148510238975: RNCC: 5 | RNVC: 2
0023897: RNCC: 5 | RNVC: 9

5 Mar 1997

5120-14-531-8849
Bearing And Bushing Inserter And Remover

145318849
T632G3006101: RNCC: 3 | RNVC: 2

25 Sep 2002

5120-14-538-3664
Spanner Wrench

145383664
NGM0010036234013: RNCC: 2 | RNVC: 2

9 Dec 2003

5120-14-398-4668
Socket Wrench Screwdriver Attachment

143984668
0518810: RNCC: 3 | RNVC: 2
3148515188107: RNCC: 5 | RNVC: 2
ST.19: RNCC: 5 | RNVC: 2
ST19: RNCC: 5 | RNVC: 2
0715 137 19: RNCC: 5 | RNVC: 2

31 Jan 1985

5120-14-359-7527
Spanner Wrench

143597527
A132447: RNCC: 3 | RNVC: 2
100358: RNCC: 5 | RNVC: 2

15 Oct 1979

5120-14-362-4006
Spanner Wrench

143624006
095061: RNCC: 3 | RNVC: 2
095061C: RNCC: 5 | RNVC: 2

19 Mar 1980

5120-14-513-1451
Socket Wrench Socket

145131451
0446789E00: RNCC: 3 | RNVC: 2

5 Mar 1999

5120-14-238-2964

5120-14-514-8398
Cross Tip Screwdriver

145148398
ENFD6569-1X40: RNCC: 3 | RNVC: 2

21 Jun 1999

5120-14-423-2317
Bague De Blocage

144232317
0747180: RNCC: 3 | RNVC: 2
SP.1735 D-10: RNCC: 5 | RNVC: 2
SP1735D-10: RNCC: 5 | RNVC: 2

14 Apr 1988

5120-14-311-8906
Outil Ratrapage Usu

143118906
C46141M2: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-251-1136
Extracteur

142511136
202470: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-559-9584
Six Point Tip Screwdriver

145599584
012205: RNCC: 3 | RNVC: 2

9 Mar 2009

5120-14-395-7463
Entrainement Broche

143957463
46AM061: RNCC: 3 | RNVC: 2

30 Oct 1984

5120-14-329-1029
Socket Head Screw Key Set

143291029
0126240: RNCC: 3 | RNVC: 2
86.JE7B: RNCC: 5 | RNVC: 2
86JE7B: RNCC: 5 | RNVC: 2

2 Jul 1975

5120-14-563-8308
Oil Filter Wrench

145638308
09228-64010: RNCC: 3 | RNVC: 2

19 Mar 2010

5120-14-031-7737
Outil Tube Encreur

140317737
267528: RNCC: 3 | RNVC: 9
91612932: RNCC: 5 | RNVC: 2

5 Jul 1980

5120-14-384-7615
Electrical Card Extractor

143847615
20198024: RNCC: 3 | RNVC: 2
20198024: RNCC: 5 | RNVC: 9

2 Jun 1983

5120-14-535-2248
Blind Riveter Mandrel

145352248
90435324: RNCC: 3 | RNVC: 2

14 May 2003

5120-14-328-1205
Socket Wrench Socket

143281205
K30L: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-543-1282
Solid Center Punch

145431282
3329: RNCC: 3 | RNVC: 2
398-5825: RNCC: 5 | RNVC: 2

26 Aug 2004

5120-14-533-6815
Socket Wrench Extension

145336815
NK.215: RNCC: 3 | RNVC: 2
3148510376004: RNCC: 5 | RNVC: 2

18 Feb 2003

5120-14-533-4606
Hand Screw Jack Extension

145334606
6717.20: RNCC: 3 | RNVC: 2
1309265080: RNCC: 5 | RNVC: 2

5 Feb 2003

5120-14-314-2336
Socket Wrench Adapter

143142336
160-71965: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-548-6483
Socket Wrench Socket

145486483
SJ.10H: RNCC: 3 | RNVC: 2

27 Jan 2006

5120-14-414-9615
Flat Tip Screwdriver

144149615
AGH14X250: RNCC: 3 | RNVC: 2
3148510058702: RNCC: 5 | RNVC: 2

26 Mar 1987

5120-14-310-6489

5120-14-266-8075

5120-14-438-0033
Insert Carte Outil

144380033
0790515B00: RNCC: 3 | RNVC: 2

5 Mar 1990

5120-14-474-4872
Cle Montage Soupape

144744872
35094-E2456: RNCC: 3 | RNVC: 2

17 Feb 1995

5120-14-463-3684
Bearing And Bushing Inserter And Remover

144633684
16380191: RNCC: 3 | RNVC: 2
16380191: RNCC: 5 | RNVC: 9

9 Jun 1993

5120-14-386-3872
Capteur Tempera Cle

143863872
02240019800: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-229-8594

5120-14-375-5515
Electrical Card Extractor

143755515
16909046: RNCC: 3 | RNVC: 2

26 Feb 1982

5120-14-274-8033

5120-14-392-7025
Jonc Pare-Bris Pose

143927025
0000043800: RNCC: 3 | RNVC: 2

7 Apr 1984

5120-14-367-4257

5120-14-215-2400
Adaptateur Special

142152400
PR46420: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-362-1726
Cale De Remplissage

143621726
C46249M1: RNCC: 3 | RNVC: 2

20 Feb 1980

5120-14-301-9687

5120-14-493-0837
Cle

144930837
203128: RNCC: 3 | RNVC: 2
F300 0T 010 0023: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-574-5021
Socket Wrench Socket

145745021
NS.18A: RNCC: 3 | RNVC: 2
3148516547255: RNCC: 5 | RNVC: 2
654725: RNCC: 5 | RNVC: 2

24 Jan 2013

5120-14-328-4712

5120-14-491-3823
Cle Pla

144913823
1102: RNCC: 3 | RNVC: 2
F300 0T 002 6132: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-348-8390
Faux Mors

143488390
D47741: RNCC: 3 | RNVC: 2

19 Apr 1978

5120-14-405-9257
Socket Wrench Socket

144059257
132123: RNCC: 3 | RNVC: 2

12 Dec 1985

5120-14-573-2036
Spanner Wrench

145732036
S153OUT1: RNCC: 3 | RNVC: 2

21 Sep 2012

5120-14-342-4679
Cle Marteau Combine

143424679
STEL62: RNCC: 3 | RNVC: 2

16 May 1977

5120-14-239-5207

5120-14-430-1076
Spanner Wrench

144301076
6232-54676: RNCC: 3 | RNVC: 2

1 Mar 1989

5120-14-377-2793
Face Spanner Wrench Socket

143772793
TMY20-32-314: RNCC: 3 | RNVC: 2

17 May 1982

5120-14-415-0255
Socket Wrench Adapter-Extension

144150255
65-3-07-045G00-626318C: RNCC: 3 | RNVC: 2
0413814R00: RNCC: 5 | RNVC: 2
413814R: RNCC: 5 | RNVC: 2
89414819: RNCC: 5 | RNVC: 2

26 Mar 1987

5120-14-328-4976
Cone De Montage

143284976
301929300: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-568-8267
Combination Box And Open End Wrench

145688267
440.28: RNCC: 3 | RNVC: 2

8 Jul 2011

5120-14-238-2973

5120-14-575-0653
Aligning Punch Set

145750653
TM3077P004: RNCC: 3 | RNVC: 2

12 Mar 2013

5120-14-391-2597
Flat Tip Screwdriver

143912597
241-1: RNCC: 3 | RNVC: 2
FR0: RNCC: 3 | RNVC: 2
2695 111 01: RNCC: 5 | RNVC: 2

1 Mar 1984

5120-14-365-8673
Adjustable Wrench

143658673
113-4: RNCC: 3 | RNVC: 2

8 Oct 1980

5120-14-416-7513
Rondelle Dappui

144167513
537278: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-444-8980
Flat Tip Screwdriver

144448980
0882663Y00: RNCC: 3 | RNVC: 2

28 Jan 1991

5120-14-443-7961
Spanner Wrench

144437961
OU15105: RNCC: 3 | RNVC: 2
0U15105: RNCC: 5 | RNVC: 2

5 Dec 1990

5120-14-439-2029
Spanner Wrench

144392029
39442308: RNCC: 3 | RNVC: 2

25 Apr 1990

5120-14-316-4986
Molder's Foundry Lifter

143164986
0U50071: RNCC: 3 | RNVC: 2
50071: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-361-6458
Spanner Wrench

143616458
BE011991: RNCC: 3 | RNVC: 2
BE011991: RNCC: 5 | RNVC: 9

20 Feb 1980

5120-14-410-0994
Mechanical Finger

144100994
16918684: RNCC: 3 | RNVC: 2

4 Jun 1986

5120-14-483-0595
Electrical Contact Inserter And Remover

144830595
001136 301 60: RNCC: 3 | RNVC: 2
00113630160: RNCC: 5 | RNVC: 2

8 Aug 1996

5120-14-253-9688
Face Spanner Wrench Socket

142539688
PR46894: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-440-2956
Screwdriver Bit

144402956
ENS.214: RNCC: 3 | RNVC: 2
3148510239170: RNCC: 5 | RNVC: 2
91710365: RNCC: 5 | RNVC: 2
0023917: RNCC: 5 | RNVC: 9

11 Jul 1990

5120-14-291-8182
Open End Wrench

142918182
44S65X70: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-395-0707
Spanner Wrench

143950707
H46686: RNCC: 3 | RNVC: 2

2 Oct 1984

5120-14-200-9454

5120-14-375-2997

5120-14-375-8067
Compression Outil

143758067
300A95000-501: RNCC: 3 | RNVC: 2
91376356: RNCC: 5 | RNVC: 2
300A95000-501: RNCC: 5 | RNVC: 2
300A95000-501: RNCC: 5 | RNVC: 9
300A95000-501: RNCC: 5 | RNVC: 9

30 Mar 1982

5120-14-231-9961
Cle Speciale

142319961
DEH: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-314-9118
Bearing And Bushing Inserter

143149118
0M458-30: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-478-6549
Screwdriver Bit

144786549
ES.184,5T: RNCC: 3 | RNVC: 2
0236960P00: RNCC: 5 | RNVC: 2
3148510249933: RNCC: 5 | RNVC: 2
0024993: RNCC: 5 | RNVC: 9

10 Nov 1995

5120-14-488-8720
Torque Wrench Adapter

144888720
SDP.17: RNCC: 3 | RNVC: 2
SDP17: RNCC: 5 | RNVC: 2

11 Jun 1997

5120-14-458-3107
Bearing And Bushing Remover

144583107
45215110: RNCC: 3 | RNVC: 2
45215110: RNCC: 5 | RNVC: 9

15 Oct 1992

5120-14-388-7936
Spanner Wrench

143887936
479306K: RNCC: 3 | RNVC: 2

29 Nov 1983

5120-14-483-5336
Outil D'installatio

144835336
1121124N00: RNCC: 3 | RNVC: 2

18 Sep 1996

5120-14-564-7028
Hand Sheet Metal Seamer

145647028
50100005: RNCC: 3 | RNVC: 2
191650879: RNCC: 5 | RNVC: 2

27 May 2010

5120-14-279-9265

5120-14-570-2174
Blind Riveter Nosepiece

145702174
235 119 00001: RNCC: 3 | RNVC: 2

29 Nov 2011

5120-14-401-3644
Socket Head Screw Key

144013644
29686805: RNCC: 3 | RNVC: 2
29686805: RNCC: 5 | RNVC: 9

5 Jun 1985

5120-14-374-0891
Etau Support

143740891
UFG302-22: RNCC: 3 | RNVC: 2

8 Dec 1981

5120-14-415-2561
Outil Levage Retour

144152561
9702D23001-603: RNCC: 3 | RNVC: 2
85-692-9467: RNCC: 6 | RNVC: 9

22 Apr 1987

5120-14-404-9223
Outillage Mallette

144049223
853-201-553-0: RNCC: 3 | RNVC: 2

20 Nov 1985

5120-14-452-3163
Bearing And Bushing Inserter And Remover

144523163
TH20C1-1-6A4: RNCC: 3 | RNVC: 2

8 Jan 1992

5120-14-254-9071
Flat Tip Screwdriver

142549071
E74351-1-5N0RMAL: RNCC: 2 | RNVC: 2

1 Jan 1969

5120-14-374-2932
Screwdriver Bit

143742932
150-7: RNCC: 3 | RNVC: 2
55-2: RNCC: 5 | RNVC: 9
85-691-6888: RNCC: 6 | RNVC: 9

8 Dec 1981

5120-14-415-0252
Socket Wrench Adapter-Extension

144150252
65-3-04-045G00-626318C: RNCC: 3 | RNVC: 2
0413822C00: RNCC: 5 | RNVC: 2
413822C: RNCC: 5 | RNVC: 2
89414818: RNCC: 5 | RNVC: 2

26 Mar 1987

5120-14-465-7520
Sertissage Etrier

144657520
851-600-768-0: RNCC: 3 | RNVC: 2

14 Oct 1993

5120-14-216-3142
Bearing And Bushing Inserter And Remover

142163142
8810007106: RNCC: 3 | RNVC: 2
881-0-007-106: RNCC: 5 | RNVC: 2

1 Jan 1965

5120-14-234-3597
Bague Conique Monta

142343597
202464: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-266-7026

5120-14-269-4952

5120-14-383-4674
Electrical Card Extractor

143834674
20198016: RNCC: 3 | RNVC: 2
20198016: RNCC: 5 | RNVC: 9

11 Apr 1983

5120-14-437-4314
Detent Handling Tool

144374314
16849490: RNCC: 3 | RNVC: 2
16849490: RNCC: 5 | RNVC: 9

31 Jan 1990

5120-14-322-0349
Spanner Wrench

143220349
000602005M: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-523-8141
Solid Center Punch

145238141
1267.30: RNCC: 3 | RNVC: 2
0714 63 13: RNCC: 5 | RNVC: 2

2 Feb 2001

5120-14-469-9048
Open End Wrench

144699048
46.9VSE: RNCC: 3 | RNVC: 2
3148511055908: RNCC: 5 | RNVC: 2
0105590: RNCC: 5 | RNVC: 9

18 May 1994

5120-14-481-8597
Socket Head Screw Key

144818597
5655584D00: RNCC: 3 | RNVC: 2

6 Jun 1996

5120-14-427-1169
Spanner Wrench

144271169
540211: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-544-9068
Open End Wrench

145449068
6502POC100002: RNCC: 3 | RNVC: 2

3 Mar 2005

5120-14-421-0543
Spanner Wrench

144210543
6213-71841: RNCC: 3 | RNVC: 2

6 Jan 1988

5120-14-555-6340
Drift

145556340
60387-804: RNCC: 3 | RNVC: 2

4 Dec 2007

5120-14-505-3043
Bearing And Bushing Inserter And Remover

145053043
MMG070B37: RNCC: 3 | RNVC: 2

18 Mar 1998

5120-14-419-9434
Blacksmith's Swage Block

144199434
540986: RNCC: 3 | RNVC: 2

10 Nov 1987

5120-14-525-2979
Torque Wrench Adapter

145252979
13.24: RNCC: 3 | RNVC: 2

23 May 2001

5120-14-436-0237
Preformed Packing Inserter

144360237
807647: RNCC: 3 | RNVC: 2

29 Nov 1989

5120-14-572-6124
Pole Extension

145726124
332A92-1418-01: RNCC: 3 | RNVC: 2
332A92141801: RNCC: 5 | RNVC: 2

17 Jul 2012

Load More Results