What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.

A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Blacksmith's Punch?

A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Mechanical Finger?

A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.

A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Screwdriver And Wrench Assembly?

A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Stakeholder Bench Plate?

A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.

What is a Drill Drift?

A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.

A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Digging Bar?

A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

What is a Valve Spring Lifter?

A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.

What is a Fuse Puller?

A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.

Hand Tools, Nonedged, Nonpowered - France (FR)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by France (FR) - NCB is 14

Page 54 of 110

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by France

51	20	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - France (FR)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 16 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Pipe Vise? 19 Items: A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.
What is a Hand Vise? 25 Items: A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.
What is a Hand Hydraulic Jack? 133 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 153 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 903 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 17 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
Swage,Bottom,Blacksmith's 10 Items
What is a Hand Tube Flaring Tool? 23 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Blacksmith's Punch? 12 Items: A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.
What is a Drain Plug Wrench? 45 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 57 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 16 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 3829 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
Flatter,Blacksmith's 18 Items
Swage,Top,Blacksmith's 12 Items
What is a Pipe Wrench? 110 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 149 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 53 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
Screwdriver,Offset 54 Items
What is a Screwdriver Bit? 707 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Mechanical Finger? 25 Items: A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.
What is a Socket Wrench Socket? 1803 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 1412 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 1641 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 52 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 565 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
Jack,Push-Pull,Screw 30 Items
What is a Hand Tube Bender? 54 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 1106 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 55 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pinch Bar? 19 Items: A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.
What is a Pry Bar? 17 Items: A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.
What is a Wrecking Bar? 15 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 273 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 413 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 32 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 295 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
Face,Hammer,Inserted 25 Items
What is a Hole Sheet Metal Holder? 37 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Screwdriver And Wrench Assembly? 11 Items: A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.
What is a Hand Rivet Set? 121 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Stakeholder Bench Plate? 22 Items: A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.
What is a Drill Drift? 32 Items: A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.
What is a Tack Claw? 15 Items: A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.
Mattock 28 Items
What is a Socket Wrench Handle Bar? 108 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Stake,Sheet Metalworking 50 Items
Riveter,Blind,Hand 76 Items
What is a Hand Shovel? 43 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 98 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 30 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
What is a Digging Bar? 20 Items: A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.
Block,Dolly,Sheet Metalworking 56 Items
What is a Piston Ring Compressor? 34 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Valve Spring Lifter? 29 Items: A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.
What is a Fuse Puller? 20 Items: A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.
What is a Hand Lead Seal Press? 18 Items: A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.
What is a Hand Beading Tool? 91 Items: A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.
What is a Hand Hammer? 502 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
Head,Hand Hammer 81 Items
What is a Lamp Extractor? 76 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Tube Packing Ring Installing Tool? 29 Items: A Tube Packing Ring Installing Tool (INSTALLING TOOL,TUBE PACKING RING) is an item designed to insert packing rings on tubes within tube sheets on condensers and similar heat exchangers. In operation, the packing rings are assembled on the loading pin mandrel and are then transferred from the mandrel on to the tube by means of a tubular sleeve which slides on the mandrel.
What is a Carpenters' Pincers? 18 Items: A Carpenters' Pincers (PINCERS,CARPENTERS') is a plierlike hand tool having two opposing jaws which may have hammerlike backs. One handle has a nail or tack pulling claw, the other is shaped to form a screwdriver. The tool may contain a wire cutter. See also NIPPERS, END CUTTING and PINCERS, FARRIERS'.
What is a Trowel? 33 Items: A Trowel is a tool used for bricklaying, concrete work, plastering, linoleum laying, and masonry work. Excludes CORNER TOOL, CONCRETE.
What is a Hand Abrasive Wheel Dresser? 12 Items: A Hand Abrasive Wheel Dresser (DRESSER,ABRASIVE WHEEL,HAND) is a tool designed to remove glaze from, dress, shape, sharpen, and true solid abrasive wheels. Excludes NIB, DIAMOND, WHEEL DRESSING.
What is a Lamp Cap Extractor? 32 Items: A Lamp Cap Extractor (EXTRACTOR,LAMP CAP) is a tool specifically designed to facilitate the removal of lamp caps from switchboards, panels or indicator lamps.
What is a Rivet Bucking Bar? 51 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 86 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 277 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Woven Cable Grip? 23 Items: A Woven Cable Grip (GRIP,CABLE,WOVEN) is a braided wire device designed to clutch a bare or insulated conductor, cable or wire rope, for holding taut or drawing through conduit.
What is a Screw Thread Insert Extractor? 19 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is an Electron Tube Extractor? 18 Items: An Electron Tube Extractor (EXTRACTOR,ELECTRON TUBE) is a hand tool designed to facilitate the removal of electron tubes from electronic equipment and to avoid burning the fingers. It may be used for installing tubes.
What is a Cross Tip Screwdriver? 362 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 21 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 11 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 37 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Tool Handle Wedge? 10 Items: A Tool Handle Wedge (WEDGE,TOOL HANDLE) is excludes WEDGE, WOOD.
What is a Marlinespike? 16 Items: A Marlinespike is a metal hand tool made in the shape of a tapered pin. One end is pointed and the opposite end may be headed. The body may contain an eye for a lanyard sling, or be grooved lengthwise. Excludes CABLE PICK and FID.
What is an Aligning Punch? 272 Items: An Aligning Punch (PUNCH,ALIGNING) is a round, square, hexagonal or octagonal bodied hand tool, having a round tapered section 6-1/2 inches (165.1 mm) or more in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, DRIFT and DRIFTPIN.
What is a Drift Punch? 25 Items: A Drift Punch (PUNCH,DRIFT) is a round, square, hexagonal, or octagonal bodied hand tool, having a round tapered section 4 to 6 inches (101.6 mm to 152.4 mm) inclusive in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, ALIGNING; and DRIFTPIN.
What is a Putty Knife? 36 Items: A Putty Knife (KNIFE,PUTTY) is a hand tool with a nonedged blade fixed to a handle for laying on and smoothing putty and the like.
What is a Socket Wrench Adapter-Extension? 40 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 30 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 184 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Socket Wrench Ratchet Attachment? 47 Items: A Socket Wrench Ratchet Attachment (RATCHET ATTACHMENT,SOCKET WRENCH) is a connection for socket wrenches and handles. Consists of a ratcheting mechanism with an internal drive on one end and an external drive on the opposite end of the same size. The item is designed to permit continuous rotation of the socket in one direction without removing the socket or handle and without a complete rotation of the handle.
What is a Wrench Extension Handle? 81 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Socket Wrench Crowfoot Attachment? 155 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 33 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 43 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 48 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 2394 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 372 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 300 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 661 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 32 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand-Operated Grommet And Eyelet Press? 12 Items: A Hand-Operated Grommet And Eyelet Press (PRESS,GROMMET AND EYELET,HAND-OPERATED) is a device which punches or pierces holes and in addition fastens or sets eyelets and grommets in cloth, paper and similar material. May be used for fastening or setting rivets, lacing hooks and snaps in cloth, paper and similar material. It is hand operated by lever or screw action. See also PUNCH, EYELET, PLIER TYPE and PRESS, GROMMET AND EYELET, FOOT OPERATED.
What is a Claw Bar? 19 Items: A Claw Bar (BAR,CLAW) is before using, refer to Reference Drawing Group AG.
What is a Shock Type Wheel Stud Nut Wrench? 11 Items: A Shock Type Wheel Stud Nut Wrench (WRENCH,WHEEL STUD NUT,SHOCK TYPE) is a manually operated item designed to remove wheel stud nuts. In operation the inner nut is turned by a socket attached to a shaft on which is a loose swinging weighted handle. The weighted handle may be swung quickly to provide an impact force against the socket to loosen the seized or jammed nuts. The outer nut is held stationary by a separate hexagonal holding wrench.
What is a Drift Pin Set? 30 Items: A Drift Pin Set is a group of DRIFTPIN having different characteristics.
What is a Tire Iron? 25 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 115 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Blacksmith's Vise? 14 Items: A Blacksmith's Vise (VISE,BLACKSMITH'S) is a clamping device consisting of a mounting plate, one stationary and one manual screw actuated jaw and a supporting member extending downward from the stationary jaw to the floor. Designed to be mounted on a bench, table or the like. May include pipe holding jaws.
What is a Machinist's Vise? 64 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Clamp Base Bench Vise? 10 Items: A Clamp Base Bench Vise (VISE,BENCH,CLAMP BASE) is a clamping device consisting of a base, one stationary and one manual screw actuated jaw, and one or more guide bars or rods. Designed with an integral clamp for attaching to a bench, table, or the like. Does not include pipe holding jaws.
What is a Fixed Open End Wrench Set? 86 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Nail Set? 11 Items: A Nail Set is a round knurled, square, hexagonal or octagonal bodied hand tool having a round tapered section terminating in a cupped point. It is designed to set brad head nails below the surface by striking it a hammerlike blow. See also PUNCH, DRIVE PIN.
What is a Socket Wrench Set? 202 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is an Open End Box Wrench Set? 10 Items: An Open End Box Wrench Set (WRENCH SET,OPEN END BOX) is a group of WRENCH, OPEN END BOX having different characteristics.
What is a Combination Box And Open End Wrench Set? 72 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Box Wrench Set? 36 Items: A Box Wrench Set (WRENCH SET,BOX) is a group of box wrenches having different characteristics. It may include a HANDLE, EXTENSION WRENCH. See also WRENCH SET, COMBINATION, BOX AND OPEN END.
What is a Hot Line Stick? 26 Items: A Hot Line Stick is a hand tool consisting of a straight, round stick (pole) made of a suitable nonconductive material with a tool fixed to one end. The other end may be plain or have a butt mounting device fixed to it. Various types of attachments (hooks, rings, and bands) may be fixed to the body. It is designed for use in the repair and maintenance of live high voltage aerial lines. Excludes hot line sticks without heads.
Handle,Mattock-Pick 15 Items
What is a Wrench Kit? 73 Items: A Wrench Kit is an assortment of various types and sizes of wrenches such as SOCKET, SOCKET WRENCH; WRENCH, OPEN END, FIXED; WRENCH, BOX and the like. It may include adapter(s), ratchet(s) and the like. See also WRENCH SET (as modified.
What is a Brad Awl? 15 Items: A Brad Awl (AWL,BRAD) is a small, pointed tool used by shoemakers, saddlers, cabinetmakers, and the like for piercing small holes in wood, leather, and similar materials, and consists of a handle with a ferrule and a blade. The blade is round, terminating in a beveled, sharp straight edge and has a shank which passes through the center of the handle.
What is a Scratch Awl? 20 Items: A Scratch Awl (AWL,SCRATCH) is an item whose nominal length of blade is less than 4 inches (101.6 millimeters) and is provided with a nondetachable handle.
What is a Screw Extractor Set? 10 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 102 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
Jack,Scissors,Hand 26 Items
What is a Piston Ring Expander? 23 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
Mallet,Plastic 62 Items
Mallet,Rubber 10 Items
What is a Wood Mallet? 37 Items: A Wood Mallet (MALLET,WOOD) is excludes MALLET, CALKING; MALLET, HAWSING and MALLET, SERVING.
What is a Rack Bar Jack? 30 Items: A Rack Bar Jack (JACK,RACK BAR) is excludes JACK, BUMPER and JACK, REEL, HAND.
What is a Pneumatic Tire Valve Core Inserter And Remover? 14 Items: A Pneumatic Tire Valve Core Inserter And Remover (INSERTER AND REMOVER,PNEUMATIC TIRE VALVE CORE) is a bar of steel having a small cylindrical slotted end for removing or installing a valve core in a valve stem by a screwing motion. See also REPAIR TOOL, PNEUMATIC TIRE VALVE.
What is a Hand Tube Swaging Tool Kit? 20 Items: A Hand Tube Swaging Tool Kit (SWAGING TOOL KIT,TUBE,HAND) is a hand-operated noncutting tool consisting of one or more PUNCH, TUBE SWAGING, HAND and a tube flaring bar.
What is a Hand Tube Flaring Punch? 11 Items: A Hand Tube Flaring Punch (PUNCH,TUBE FLARING,HAND) is a noncutting tool having a shaped end or section designed to flare the ends of tubes. One type is designed to flare the ends of tubes against a tube sheet, and another to flare tube ends to mate with tube fittings. Includes punch components of FLARING TOOL, TUBE, HAND.
What is a Hose Strap Band Clamping Tool? 26 Items: A Hose Strap Band Clamping Tool (CLAMPING TOOL,STRAP BAND,HOSE) is an item designed to tension and lock metal straps around a rubber hose, and the like. It is also used to clamp and hold fittings therein.
What is a Mechanical Puller? 3073 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 470 Items
What is a Slip Joint Pliers? 84 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Brake Repair Pliers? 14 Items: A Brake Repair Pliers (PLIERS,BRAKE REPAIR) is a tool having jaws designed for use in brake repair operations, such as removing and replacing items such as keys, springs, and the like. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 226 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 12 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 81 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 56 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 15 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 11 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 29 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Cross Tip Screwdriver Set? 14 Items: A Cross Tip Screwdriver Set (SCREWDRIVER SET,CROSS TIP) is a group of SCREWDRIVER, CROSS TIP having different characteristics.
What is a Spanner Wrench Set? 18 Items: A Spanner Wrench Set (WRENCH SET,SPANNER) is a group of items under WRENCH, SPANNER having different characteristics.
What is a Drive Pin Punch Set? 31 Items: A Drive Pin Punch Set (PUNCH SET,DRIVE PIN) is a group of PUNCH, DRIVE PIN having different characteristics.
What is an Aligning Punch Set? 13 Items: An Aligning Punch Set (PUNCH SET,ALIGNING) is a group of PUNCH, ALIGNING having different characteristics. See also DRIFTPIN SET.
What is a Slugging Type Box Wrench Socket? 16 Items: A Slugging Type Box Wrench Socket (SOCKET,SLUGGING TYPE BOX WRENCH) is an item having a hexagonal external drive at one end, made to fit into the internal hexagonal or 12-point opening of a slugging type box wrench. The opposite end has a single-broached hexagonal opening of the same size as the external drive. The item is designed with extra thick walls to withstand the impact of sledge blows on the driving wrench.
What is a Mechanical Puller Step Plate? 44 Items: A Mechanical Puller Step Plate (STEP PLATE,MECHANICAL PULLER) is a circular disk, flanged to provide a shoulder, and designed to provide a base for the screw point of a PULLER, MECHANICAL when pulling externally mounted bearings, gears, and the like from hollow shafts or housings. It has a concentric, countersunk hole to accommodate the puller screw point.
What is a Solid Center Punch? 79 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Cable Type Ratchet Lever Puller? 20 Items: A Cable Type Ratchet Lever Puller (PULLER,RATCHET LEVER,CABLE TYPE) is an item consisting of a metal frame and ratchet lever reel to which is attached one end of a flexible cable (wire rope). The cable feeds through the fast eye in the metal frame, and may be reeved through a slip hook tackle hook. See also BINDER, LOAD; HOIST, WIRE ROPE and STRETCHER, WIRE.
What is an Electronic Equipment Tuning Wand? 18 Items: An Electronic Equipment Tuning Wand (TUNING WAND,ELECTRONIC EQUIPMENT) is a hand-held rod used in determining the adjustment of the windings of a radio frequency coil. It is made of insulating material with iron on one end and brass on the other end. By inserting the iron end in the coil, the inductance is increased and by inserting the brass end, the inductance is decreased.
What is a Combination Open End And Spanner Wrench? 14 Items: A Combination Open End And Spanner Wrench (WRENCH,OPEN END AND SPANNER,COMBINATION) is a tool having open end wrench characteristics at one end and spanner wrench features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s) at the other end.
What is a Detent Handling Tool? 187 Items: A Detent Handling Tool (HANDLING TOOL,DETENT) is a specially designed handling tool consisting of a rigid bar with a T-handle on one end. The other end is equipped with threads designed to mate the threads of a detent to facilitate inserting or extracting.
What is a Hand Material Handling Hook? 23 Items: A Hand Material Handling Hook (HOOK,MATERIAL HANDLING,HAND) is a hook whose curved end conforms to Style AP1, AP2, AP3 or AP4 of Reference Drawing Group AP. Excludes HOOK, MANHOLE COVER, HAND; HOOK, WIRE BREAKING, HAND; HOOK, ROCK CRUSHER FEEDING, HAND; HOOK, STRAINER REMOVING, HAND and HOOKS, BAG HANDLING, HAND.
What is a Magnetic Retrieving Tool? 11 Items: A Magnetic Retrieving Tool (RETRIEVING TOOL,MAGNETIC) is a hand-operated magnetic device used to locate and pick up metallic articles, such as bolts, nuts, pins, washers, and the like, in confined spaces. It may be rigid, flexible or adjustable. Excludes FINGER, MECHANICAL.
What is a Mechanical Puller Adapter? 78 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Combination Box And Open End Box Wrench? 13 Items: A Combination Box And Open End Box Wrench (WRENCH,BOX AND OPEN END BOX,COMBINATION) is a double end wrench, box and open end box, primarily designed for removing or replacing tube fittings. The opening in the open end box may be machined at an angle from the longitudinal center line of the wrench.
What is a Screw Thread Insert Inserter? 136 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Flat Tip Screwdriver Set? 48 Items: A Flat Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP) is a group of SCREWDRIVER, FLAT TIP having different characteristics.
What is a Terminal Crimping Tool Contact Positioner? 89 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 16 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is an Adjustable Wrench? 138 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 239 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 75 Items
Handle,Shovel 10 Items
What is a Socket Wrench Spanner Attachment? 88 Items: A Socket Wrench Spanner Attachment (SPANNER ATTACHMENT,SOCKET WRENCH) is an item having an adjustable or fixed span with pin, hook, or key type end that is used to fit and turn various size retaining rings, cover plates, plugs, couplings, and like parts. Usually designed to be driven by a male driver.
What is a Retaining Ring Installation Tool? 44 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Tacker? 16 Items: A Tacker is a hand-operated, hammerlike or gunlike item without a clincher, used to drive preformed connecting elements like pins, nails or staples through one object or piece of material into another. Excludes STAPLER (as modified).
What is a Bearing And Bushing Inserter? 290 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 207 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 939 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 14 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 93 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 161 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 94 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 141 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 53 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Six Point Tip Screwdriver? 155 Items: A Six Point Tip Screwdriver (SCREWDRIVER,SIX POINT TIP) is a manual screwdriver having a single nonremoveable blade having a tip with six rounded points.
What is a Seal Inserter And Remover? 147 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 478 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is a Preformed Packing Inserter And Remover? 34 Items: A Preformed Packing Inserter And Remover (INSERTER AND REMOVER,PREFORMED PACKING) is a hand tool designed to install and remove a PACKING, PREFORMED.
What is a Pin Remover? 34 Items: A Pin Remover (REMOVER,PIN) is a hand tool designed to facilitate the removal of a pin from a hole.
What is a Pin Inserter And Remover? 13 Items: A Pin Inserter And Remover (INSERTER AND REMOVER,PIN) is a rodlike tool designed to facilitate the insertion and removal of a pin from a hole.
What is an Electrical Contact Inserter And Remover? 37 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Piston Inserter? 40 Items: A Piston Inserter (INSERTER,PISTON) is a tool designed to permit installation of a piston or piston assembly without damaging the packings or piston.
What is a Spring Inserter And Remover? 85 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 13 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Stud Inserter? 22 Items: A Stud Inserter (INSERTER,STUD) is a device designed to drive in studs. It does not have any facilities for removing or extracting studs. See also INSERTER AND REMOVER, STUD.
What is a Stud Inserter And Remover? 17 Items: A Stud Inserter And Remover (INSERTER AND REMOVER,STUD) is a group of items designed to extract and to drive studs. It may include collets, guides, housings, holders and the like. See also REMOVER SET, STUD and INSERTER, STUD.
What is a Gear Inserter? 54 Items: A Gear Inserter (INSERTER,GEAR) is a hand tool designed to install various gears onto a gearshaft. It may be operated by a pushing or a striking force.
What is a Crimping Tool Die? 73 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is an Electrical Connector Inserter? 45 Items: An Electrical Connector Inserter (INSERTER,ELECTRICAL CONNECTOR) is a hand tool designed to hold an electrical connector, and to assist in the positioning and installation of the connector on a cover, panel or the like.
What is a Float? 12 Items: A Float is a tool used for concrete, plastering and grouting work.
What is a Mechanical Puller Set? 19 Items: A Mechanical Puller Set (PULLER SET,MECHANICAL) is two or more separate PULLER, MECHANICAL of different fixed sizes.
What is a Lifting Pneumatic Bag? 11 Items: A Lifting Pneumatic Bag (PNEUMATIC BAG,LIFTING) is a device made of flexible material designed to lift another item by being placed under the item and being inflated with air or some other gas. It will have a means of being connected to an air or gas source and may include a connector hose, a control valve and/or a pressure regulator.
What is a Cable Tie Installation Tool? 22 Items: A Cable Tie Installation Tool (INSTALLATION TOOL,CABLE TIE) is a lightweight, hand-held, hand-operated tool designed to fasten cable ties, straps and the like. Cable tie is inserted into the nose of the tool flush to the cable tie head. Trigger handle tightens cable tie and cuts off any excess. These installation tools are available in a variety of sizes depending on their intended use with miniature, intermediate, standard, heavy or extra heavy cross section ties.
What is a Bearing Staking Installation Tool? 159 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
Wrench Set,Ratchet 15 Items
What is a Sealant Dispenser? 26 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Retaining Ring Pliers Set? 10 Items: A Retaining Ring Pliers Set (PLIERS SET,RETAINING RING) is a group of PLIERS, RETAINING RING having different characteristics.
What is a Hand Armament Subsystem Carrier? 52 Items: A Hand Armament Subsystem Carrier (CARRIER,ARMAMENT SUBSYSTEM,HAND) is a metallic item with a clamp device and/or space for depositing articles. It is used for transporting weapon parts during maintanence and/or repair work, such as gun barrel, automatic loader, breechblock and the like.
What is a Ring Retaining Pliers Tip Set? 13 Items: A Ring Retaining Pliers Tip Set (TIP SET,PLIERS,RING RETAINING) is a collection of removable metallic tips in matched pairs used to provide various size capablities to PLIERS, RING RETAINING which permits the removal and installation of internal and external retaining rings.
What is a Plug Electrical Connector Extractor? 45 Items: A Plug Electrical Connector Extractor (EXTRACTOR,ELECTRICAL CONNECTOR,PLUG) is a hand tool designed to disassemble CONNECTOR, PLUG, ELECTRICAL from a CONNECTOR, RECEPTACLE, ELECTRICAL.
What is a Torque Wrench Adapter Set? 10 Items: A Torque Wrench Adapter Set (ADAPTER SET,TORQUE WRENCH) is tWO or more ADAPTER, TORQUE WRENCH of different sizes.
What is an Electronic Component Inserter And Remover? 79 Items: An Electronic Component Inserter And Remover (INSERTER AND REMOVER,ELECTRONIC COMPONENT) is an item which can insert or remove an electronic component package such as MICROCIRCUIT; RESISTOR, NETWORK (as modified); and the like from its mounting position or socket. Excludes INSERTER AND REMOVER, ELECTRICAL CONTACT; REMOVER, ELECTRICAL CONTACT; EXTRACTOR, ELECTRICAL CARD; EXTRACTOR, ELECTRONIC CRYSTAL UNIT; EXTRACTOR, ELECTRON TUBE.
What is an Impact Type Bit Set And Handle Screwdriver? 14 Items: An Impact Type Bit Set And Handle Screwdriver (SCREWDRIVER,BIT SET AND HANDLE,IMPACT TYPE) is an item consisting of a set of screwdriver bits and a impact driver to accommodate the bits of various types and characteristics. It is designed to transmit a strong rotating movement by the impact of a hammer blowed on the impact driver. It is used to loosen rusted or seized screws. Excludes SCREWDRIVER, BIT SET AND HANDLE.
What is a Hand Vise Jaw? 19 Items: A Hand Vise Jaw (JAW,VISE,HAND) is an item consisting of two opposing parts of a VISE, HAND. The item is moveable and able to open and close. It can hold, grasp or clamp work.
What is a Screwdriver Handle? 28 Items: A Screwdriver Handle (HANDLE,SCREWDRIVER) is an item used to accommodate various types of BIT, SCREWDRIVER. It is designed to rotate a bit that is used for installing or removing screws.
What is a Wire Twister Pliers? 25 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 284 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is a Mechanical Puller Body? 45 Items: A Mechanical Puller Body (BODY,PULLER,MECHANICAL) is an item designed to support and enclose the internal parts of a PULLER,MECHANICAL.
What is a Flat Tip And Cross Tip Screwdriver Set? 39 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is a Socket Wrench Screwdriver Attachment Set? 22 Items: A Socket Wrench Screwdriver Attachment Set (SCREWDRIVER ATTACHMENT SET,SOCKET WRENCH) is a set of screwdriver attachment, socket wrench of different sizes. Items consist of a female square drive on one end to attach to a handle, socket wrench and various screwdriver tip configurations on the opposite end. Excludes SCREWDRIVER ATTACHMENT,SOCKET WRENCH
What is an Oil Filter Wrench? 44 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 430 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Communications Equipment Spring Adjuster? 13 Items: A Communications Equipment Spring Adjuster (ADJUSTER,SPRING,COMMUNICATIONS EQUIPMENT) is a single or double end tool, equipped with slot(s) of various dimensions or with cylindrical rod(s), used for adjusting the springs or spring tensioned parts of electronic equipment.
What is a Rotating Members Aligning Tool? 32 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
What is a Final Drive Assembly Alignment Pin? 41 Items: A Final Drive Assembly Alignment Pin (ALIGNMENT PIN,FINAL DRIVE ASSEMBLY) is a special designed pin used in the assembling of the final drive.
Arm,Handling Tool 77 Items
What is a Splicing Sleeve Compressing Tool? 23 Items: A Splicing Sleeve Compressing Tool (COMPRESSING TOOL,SPLICING SLEEVE) is a hand tool having hinged leverage handles similar to a CUTTER, BOLT or pliers, designed to compress a splicing sleeve when joining the ends of two conductors, or when forming an eye splice in the end of a wire rope. Excludes CRIMPING TOOL, TERMINAL, HAND.
What is a Hand Screw Jack Extension? 14 Items: A Hand Screw Jack Extension (EXTENSION,HAND SCREW JACK) is a length of externally threaded rigid shafting which is the adjustable section of a JACK, SCREW, HAND.
What is a Mechanical Puller Gear Adapter? 21 Items: A Mechanical Puller Gear Adapter (GEAR ADAPTER,PULLER,MECHANICAL) is an adapter that adapts a PULLER,MECHANICAL, to pull a certain gear.
Handle,Hydraulic Jack 18 Items
What is a Female Electrical Contact Resizing Tool? 11 Items: A Female Electrical Contact Resizing Tool (RESIZING TOOL,FEMALE ELECTRICAL CONTACT) is a tool designed to shape to a specific size, female contacts such as those used on electrical connectors, tube sockets, crystal sockets, and pin jacks.
What is a Screwdriver And Socket Wrench Combination? 13 Items: A Screwdriver And Socket Wrench Combination is a hand-tool formed into an integral unit with a socket wrench at one end and a screwdriver bit at the other end. See also SCREWDRIVER AND WRENCH ASSEMBLY.
What is a Hand Hose Fitting Swaging Tool Kit? 11 Items: A Hand Hose Fitting Swaging Tool Kit (SWAGING TOOL KIT,HOSE FITTING,HAND) is a device, hydraulically actuated by hand or power operated pump, consisting of face plate, adapter plate, finger cages, fingers, ram, bushing, and expanding mandrels combined on a single base in various functional arrangements. It is used for swaging the outside diameter of hose assembly fittings, expanding the inside diameter of hose assemblies, and securing the fabrication of hose assemblies. Included are a hand or power operated pump, lubricant, cases, and trays.
What is a Catch Lever Tool? 12 Items: A Catch Lever Tool (LEVER TOOL,CATCH) is a specially designed hand tool which engages the opening and closing lever of a CATCH (as modified) for ease of operation. It is constructed of thin rigid material, usually flat, and one end has an engaging tongue.
What is a Manual Impact Wrench? 11 Items: A Manual Impact Wrench (WRENCH,IMPACT,MANUAL) is a manually operated handheld tool consisting of spring-loaded handle and a power-impact head which delivers a torsional impact from either continuous movement of the handle in one direction, or by a reciprocating action. It is used in tightening and loosening fasteners, such as bolts, nuts, and the like. The item may include sockets, extensions and offset fittings, nut runners, and the like.
What is a Drift? 63 Items: A Drift is an item consisting of a tubular body fitted with replaceable tips. It is designed to insert or remove mechanical components where space is restricted.
What is a Nutdriver? 46 Items: A Nutdriver is a non-powered hand tool with a screwdriver style handle, shaft and formed female hex or square socket at driving end.
What is a Locking Device Removal Tool? 12 Items: A Locking Device Removal Tool (REMOVAL TOOL,LOCKING DEVICE) is a hand tool designed to facilitate the removal of a WASHER, KEY and a LOCKING PLATE, NUT AND BOLT.
What is a Hydraulic Fitting Crimping Tool Head? 26 Items: A Hydraulic Fitting Crimping Tool Head (HEAD,CRIMPING TOOL,HYDRAULIC FITTING) is a component of a crimping tool used to compress fittings on fluid tubes. It consists of a U-shape item, in which, are mounted different sizes of DIE, CRIMPING TOOL for tubes of various diameters.
What is a Torque Screwdriver? 11 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.
What is a Special Purpose Combination Wrench? 13 Items: A Special Purpose Combination Wrench (WRENCH,COMBINATION,SPECIAL PURPOSE) is a tool having a combination of ends and facets. The ends may have open end, box or spanner characteristics. The sides may have features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s). Designed to fit specific items, not sized as standard or metric.
What is a Screwdriver Bit Holder? 56 Items: A Screwdriver Bit Holder (HOLDER,SCREWDRIVER BIT) is an attachment with a socket end for accepting male hexagon shank insert bits and a drive end for adapting to a portable power or hand tool.
What is a Telescoping Pole? 16 Items: A Telescoping Pole (POLE,TELESCOPING) is an item which is designed to be extended or compressed by the sliding of overlapping sections. This item may or may not be able to accommodate an extension.

Stock Items From Supply Class 5120 Page 54 of 110

5120-14-560-8958
Combination Box And Open End Wrench

145608958
40.32LA: RNCC: 3 | RNVC: 2
3148516622310: RNCC: 5 | RNVC: 2
91905961: RNCC: 5 | RNVC: 9

28 May 2009

5120-14-252-5573

5120-14-217-6044
Cle Plate

142176044
2-71285: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-273-6808
Spanner Wrench

142736808
8810505000: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-490-6825
Gage

144906825
217 G 00200 500: RNCC: 3 | RNVC: 2
F300 0T 000 0920: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-570-6963
Face Spanner Wrench Socket

145706963
7488850087: RNCC: 1 | RNVC: 2
15004857-0: RNCC: 3 | RNVC: 2

18 Jan 2012

5120-14-338-4764
Faux Mor Demi-Coqui

143384764
C46292-1: RNCC: 3 | RNVC: 2

6 Nov 1976

5120-14-322-7487
Table Assise Verin

143227487
NO PRIMARY REF14-322-7487: RNCC: 3 | RNVC: 2
2501351: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-357-5132
Open End Wrench

143575132
30AM019: RNCC: 3 | RNVC: 2

7 Jun 1979

5120-14-247-1644
Bloc De Presertissa

142471644
PS6K: RNCC: 3 | RNVC: 2
P4PS6K: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-388-6592
Spanner Wrench

143886592
DLP751900: RNCC: 3 | RNVC: 2
DLT001954: RNCC: 5 | RNVC: 2
DLT01954: RNCC: 5 | RNVC: 9

3 Nov 1983

5120-14-511-5468
Six Point Tip Screwdriver

145115468
ACZX.45X150: RNCC: 3 | RNVC: 2
AZXH.45X150: RNCC: 5 | RNVC: 2
0613 255 45: RNCC: 5 | RNVC: 2
3148510134789: RNCC: 5 | RNVC: 2
13478: RNCC: 5 | RNVC: 2

24 Dec 1998

5120-14-289-7496
Electrical Card Extractor

142897496
15152017: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-236-8772
Spanner Wrench

142368772
0775-78: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-442-2138
Fixed Open End Wrench Set

144422138
7185M: RNCC: 3 | RNVC: 2
91638495: RNCC: 5 | RNVC: 2

3 Oct 1990

5120-14-460-7598
Handling Tool Arm

144607598
50092100: RNCC: 3 | RNVC: 2

8 Feb 1993

5120-14-388-8192
Spanner Wrench

143888192
SV9134: RNCC: 3 | RNVC: 2
0000334330: RNCC: 5 | RNVC: 2
5000269134: RNCC: 5 | RNVC: 2
SV9134: RNCC: 5 | RNVC: 9

29 Nov 1983

5120-14-236-8767
Spanner Wrench

142368767
0673-78: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-237-9820
Spanner Wrench

142379820
B02202: RNCC: 3 | RNVC: 2
0000330388: RNCC: 5 | RNVC: 2
0000330388: RNCC: 5 | RNVC: 9
330388: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-572-1142
Mechanical Puller

145721142
DM.50: RNCC: 3 | RNVC: 2
3148517441811: RNCC: 5 | RNVC: 2
744181: RNCC: 5 | RNVC: 2

8 Jun 2012

5120-14-352-9531

5120-14-234-5332

5120-14-418-5829
Pointe A Crocheter

144185829
2364: RNCC: 3 | RNVC: 2

2 Sep 1987

5120-14-490-6965
Mallet

144906965
241 M 00402 000: RNCC: 3 | RNVC: 2
F300 0T 000 1107: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-576-1365
Parach Tension Tool

145761365
304227-0: RNCC: 3 | RNVC: 2

31 May 2013

5120-14-463-4729
Lot Outillage

144634729
DLP799903: RNCC: 3 | RNVC: 2

16 Jun 1993

5120-14-418-3445
Spanner Wrench

144183445
8812685012: RNCC: 3 | RNVC: 2

12 Aug 1987

5120-14-297-1294
Spanner Wrench

142971294
9412J: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-232-2307
Spark Testing Screwdriver

142322307
NO PRIMARY REF14-232-2307: RNCC: 3 | RNVC: 2
8042: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-326-2769
Porte-Join Position

143262769
330A98-2156-00: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-241-0229
Extracteur Magneto

142410229
1: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-469-5128
Bearing Installation Tool Base

144695128
9689160964: RNCC: 3 | RNVC: 2
91739780: RNCC: 5 | RNVC: 2
KDEP1582: RNCC: 5 | RNVC: 2

27 Apr 1994

5120-14-280-4101
Socket Head Screw Key

142804101
A121277: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-490-9202
Tournev

144909202
4169 158 210 009: RNCC: 3 | RNVC: 2
F300 0T 000 5681: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-345-9488

5120-14-430-3438
Palier Extracteur

144303438
RT16994: RNCC: 3 | RNVC: 2

15 Mar 1989

5120-14-490-8732
Cle

144908732
4065 030 000 271: RNCC: 3 | RNVC: 2
F300 0T 000 4974: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-354-6016
Spanner Wrench

143546016
269097: RNCC: 3 | RNVC: 2
269097: RNCC: 5 | RNVC: 9

31 Jan 1979

5120-14-538-8803
Spring Inserter And Remover

145388803
NGM0022030200433: RNCC: 2 | RNVC: 2

9 Dec 2003

5120-14-285-6265

5120-14-490-8817
Alene

144908817
4066 214 310 500: RNCC: 3 | RNVC: 2
F300 0T 000 5089: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-387-8652
Mont Cuv Roul Outil

143878652
OU50391: RNCC: 3 | RNVC: 2
0U50391: RNCC: 5 | RNVC: 2

12 Oct 1983

5120-14-468-2347
Bearing And Bushing Remover

144682347
7M585: RNCC: 3 | RNVC: 2

16 Feb 1994

5120-14-373-7642
Electrical Card Extractor

143737642
559532: RNCC: 3 | RNVC: 2

13 Nov 1981

5120-14-204-2991
Cle Speciale

142042991
M1-080: RNCC: 3 | RNVC: 2

1 Jan 1963

5120-14-313-7299
Outil De Rivetage

143137299
NO PRIMARY REF14-313-7299: RNCC: 3 | RNVC: 2
147100-78: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-274-8659

5120-14-268-1562

5120-14-369-7612
Face Spanner Wrench Socket

143697612
F46404: RNCC: 3 | RNVC: 2

17 Apr 1981

5120-14-463-1702
Mechanical Puller Attachment

144631702
16380402: RNCC: 3 | RNVC: 2
16380402: RNCC: 5 | RNVC: 9

26 May 1993

5120-14-344-3397
Spanner Wrench

143443397
C47856: RNCC: 3 | RNVC: 2
7M144T: RNCC: 3 | RNVC: 2

10 Aug 1977

5120-14-332-0177
Spanner Wrench

143320177
503653REPD: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-431-7849
Socket Head Screw Key

144317849
0453-6089909: RNCC: 3 | RNVC: 2

10 May 1989

5120-14-237-9822
Spanner Wrench

142379822
P02415: RNCC: 3 | RNVC: 2
0000330491: RNCC: 5 | RNVC: 2
330491: RNCC: 5 | RNVC: 9
0000330491: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-488-8721
Torque Wrench Adapter

144888721
SDP.19: RNCC: 3 | RNVC: 2
SDP19: RNCC: 5 | RNVC: 2

11 Jun 1997

5120-14-429-1545
Spanner Wrench

144291545
530549: RNCC: 3 | RNVC: 2

11 Jan 1989

5120-14-452-1234
Combination Box And Open End Wrench Set

144521234
40.JU12T: RNCC: 3 | RNVC: 2
40JU12T: RNCC: 5 | RNVC: 2
91710848: RNCC: 5 | RNVC: 2
0528755: RNCC: 5 | RNVC: 2
3148515287558: RNCC: 5 | RNVC: 2

18 Dec 1991

5120-14-222-6165

5120-14-557-6302
Socket Wrench Handle Ratchet Head

145576302
DTCO-S: RNCC: 3 | RNVC: 2

1 Jul 2008

5120-14-527-2897
Cle A Ergots

5120-14-457-2077
Mechanical Finger

144572077
262729: RNCC: 3 | RNVC: 2
89437803: RNCC: 5 | RNVC: 2

13 Aug 1992

5120-14-573-1846
Face Spanner Wrench Socket

145731846
14100089049: RNCC: 3 | RNVC: 2

20 Sep 2012

5120-14-521-6829
Ou Buse Melangeuse

145216829
9501PPM101: RNCC: 3 | RNVC: 2

4 Sep 2000

5120-14-329-9430

5120-14-291-8180

5120-14-292-3791

5120-14-299-2985
Drift

142992985
28644: RNCC: 3 | RNVC: 2
28644: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-451-1155
Bearing And Bushing Inserter And Remover

144511155
45057854: RNCC: 3 | RNVC: 2
45057854: RNCC: 5 | RNVC: 9

30 Oct 1991

5120-14-421-6294
Open End Wrench

144216294
210012: RNCC: 3 | RNVC: 2

20 Jan 1988

5120-14-527-6455
Spring Inserter And Remover

145276455
888-480-600-1: RNCC: 3 | RNVC: 2

7 Nov 2001

5120-14-489-6183
Open End Wrench

144896183
888-443-600-1: RNCC: 3 | RNVC: 2

6 Aug 1997

5120-14-545-3944
Pliers

145453944
183.16CPE: RNCC: 3 | RNVC: 2

11 Apr 2005

5120-14-498-1528
Cle

144981528
91405165: RNCC: 3 | RNVC: 2
CH864: RNCC: 5 | RNVC: 2
F300 0T 004 3751: RNCC: 6 | RNVC: 9

29 Oct 1997

5120-14-224-9890

5120-14-293-4448
Pince Comparateur

142934448
8006108400: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-322-3354

5120-14-292-5861

5120-14-234-9512
Volant De Descente

142349512
723302: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-523-8144
Sleeve Stretching Pliers

145238144
454.2: RNCC: 3 | RNVC: 2

2 Feb 2001

5120-14-423-2358
Poignee Pvc

144232358
SP2086D-7: RNCC: 3 | RNVC: 2

14 Apr 1988

5120-14-446-7860
Cle A Douil Douille

5120-14-490-9489
Tuyau

144909489
4280 284 000 025: RNCC: 3 | RNVC: 2
F300 0T 000 7233: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-249-0645

5120-14-256-1532

5120-14-420-0985
Mechanical Puller Gear Adapter

144200985
8810503004: RNCC: 3 | RNVC: 2

18 Nov 1987

5120-14-387-8647
Open End Wrench

143878647
OU50416: RNCC: 3 | RNVC: 2
0U50416: RNCC: 5 | RNVC: 2

7 Mar 1996

5120-14-436-0278
Preformed Packing Inserter

144360278
RT30542: RNCC: 3 | RNVC: 2

29 Nov 1989

5120-14-542-9447
Open End Wrench

145429447
8060001: RNCC: 3 | RNVC: 2
8060001: RNCC: 5 | RNVC: 2

14 Aug 2004

5120-14-322-2393
Socket Wrench Adapter

143222393
C46472: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-444-5587
Torque Wrench Multiplier

144445587
TB10502: RNCC: 3 | RNVC: 2

15 Jan 1991

5120-14-264-9593
Spanner Wrench

142649593
0332-78: RNCC: 3 | RNVC: 2
RA332: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-441-1854
Bearing And Bushing Inserter And Remover

144411854
16849727: RNCC: 3 | RNVC: 2
16849727: RNCC: 5 | RNVC: 9

22 Aug 1990

5120-14-544-7389
Mechanical Puller Attachment

145447389
5000262381: RNCC: 3 | RNVC: 2

22 Feb 2005

5120-14-360-7701
Entraineur Montage

143607701
MAS4720: RNCC: 3 | RNVC: 2
M532-01-11000-2A2: RNCC: 5 | RNVC: 2

19 Dec 1979

5120-14-410-0524
Etalonnage Calibre

144100524
851-300-012-0: RNCC: 3 | RNVC: 2

4 Jun 1986

5120-14-234-7082
Outillage Dextracti

142347082
77795ET77796ET77797: RNCC: 3 | RNVC: 2
77797: RNCC: 3 | RNVC: 2
77795ET77796ET77797: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-479-0317
Torque Wrench Adapter

144790317
888-374-600-1: RNCC: 3 | RNVC: 2

6 Dec 1995

5120-14-442-5705
Open End Wrench

144425705
GS120-14X15: RNCC: 3 | RNVC: 2
1.70.1008: RNCC: 5 | RNVC: 2

22 Oct 1990

5120-14-466-5916
Bearing And Bushing Inserter And Remover

144665916
851-500-008-0: RNCC: 3 | RNVC: 2

17 Nov 1993

5120-14-330-3698
Etanch Centreur Bag

143303698
205236: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-333-7346

5120-14-534-8104
Helice Melangeuse

145348104
PR200S: RNCC: 3 | RNVC: 2

8 Apr 2003

5120-14-475-1000
Corps Body

144751000
29799654: RNCC: 3 | RNVC: 9

17 Mar 1995

5120-14-357-2690

5120-14-406-7838
Spanner Wrench

144067838
TZ693: RNCC: 3 | RNVC: 2
TZ693: RNCC: 5 | RNVC: 9

8 Jan 1986

5120-14-355-4164
Hand Sheet Metal Pipe Crimping Tool

143554164
ESPS1: RNCC: 3 | RNVC: 2

19 Mar 1979

5120-14-426-8453
Pliers

144268453
0411-60209: RNCC: 3 | RNVC: 2

23 Sep 1988

5120-14-404-8328
Electrical Contact Remover

144048328
282921: RNCC: 3 | RNVC: 2
91548197: RNCC: 5 | RNVC: 2

20 Nov 1985

5120-14-417-9698
Socket Wrench Socket

144179698
NM.27: RNCC: 3 | RNVC: 2
3148510390604: RNCC: 5 | RNVC: 2
NM27: RNCC: 5 | RNVC: 2
0714 15 02: RNCC: 5 | RNVC: 2
0039060: RNCC: 5 | RNVC: 9

6 Aug 1987

5120-14-407-3300
Joints Emmanche

144073300
853-201-201-0: RNCC: 3 | RNVC: 2

12 Feb 1986

5120-14-287-6917
Pastille De Cle Bus

142876917
13599600Z: RNCC: 3 | RNVC: 2
59960: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-266-4869

5120-14-490-8788
Tournev

144908788
4065 200 000 665: RNCC: 3 | RNVC: 2
F300 0T 000 5058: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-314-4289
Cle Montage Aquilon

143144289
113400: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-259-5582

5120-14-429-1542
De Montag Outillage

144291542
530544: RNCC: 3 | RNVC: 2

11 Jan 1989

5120-14-321-7890

5120-14-351-9472
Carbura Reglage Cle

143519472
07908-3690000: RNCC: 3 | RNVC: 2
07908-3690000: RNCC: 5 | RNVC: 2

16 Oct 1978

5120-14-323-1987
Cross Tip Screwdriver

143231987
181-5: RNCC: 3 | RNVC: 2
18105: RNCC: 5 | RNVC: 2
91548086: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-404-0837
Torque Wrench Adapter

144040837
853-100-168-0: RNCC: 3 | RNVC: 2

11 Sep 1985

5120-14-399-1506
Outillage De Montag

143991506
4ET13816-1: RNCC: 3 | RNVC: 2

6 Mar 1985

5120-14-506-7647
De Montage Outil

145067647
M12540-1: RNCC: 3 | RNVC: 2

14 May 1998

5120-14-032-0426
Outil Alignement

140320426
M30950: RNCC: 3 | RNVC: 2

5 Jul 1980

5120-14-239-6382

5120-14-437-0676
Open End Wrench

144370676
11153: RNCC: 3 | RNVC: 2

17 Jan 1990

5120-14-209-5416
Appui De Cric Outil

142095416
A22915: RNCC: 3 | RNVC: 2

1 Jan 1964

5120-14-573-9211
Socket Wrench Adapter

145739211
3814: RNCC: 3 | RNVC: 2
3814: RNCC: 5 | RNVC: 2
3814: RNCC: 5 | RNVC: 2

20 Nov 2012

5120-14-371-2220

5120-14-222-1652

5120-14-352-7191
Relai Bute Cambreur

143527191
912090: RNCC: 3 | RNVC: 2

14 Nov 1978

5120-14-226-3717

5120-14-226-3735

5120-14-405-6159
Compr Axi Disp Mont

144056159
8811994000: RNCC: 3 | RNVC: 2

4 Dec 1985

5120-14-436-0292
Guide

144360292
RT32471: RNCC: 3 | RNVC: 2

29 Nov 1989

5120-14-483-9460
Outillage Essai

144839460
PC6109A: RNCC: 3 | RNVC: 2

10 Oct 1996

5120-14-307-4014

5120-14-226-3744

5120-14-395-7385
Socket Head Screw Key

143957385
95AM003: RNCC: 3 | RNVC: 2

30 Oct 1984

5120-14-523-5452
Hydraulic Fitting Crimping Tool Head

145235452
DLT30PSHA3012: RNCC: 3 | RNVC: 2

24 Jan 2001

5120-14-371-9163
Screw Thread Insert Inserter

143719163
01500112960: RNCC: 3 | RNVC: 2

5 Aug 1981

5120-14-543-0938
Socket Head Screw Key Set

145430938
MOD.84TZS: RNCC: 3 | RNVC: 2

24 Aug 2004

5120-14-348-8387
Spanner Wrench

143488387
D47736: RNCC: 3 | RNVC: 2

19 Apr 1978

5120-14-504-0224
Spanner Wrench

145040224
538: RNCC: 3 | RNVC: 2

4 Feb 1998

5120-14-570-2558
Bearing Staking Installation Tool

145702558
UFA31576: RNCC: 3 | RNVC: 2

2 Dec 2011

5120-14-461-6478
Support Patin

144616478
PL1DA002OR901003A: RNCC: 3 | RNVC: 2

19 Mar 1993

5120-14-558-9441
Six Point Tip Screwdriver

145589441
775560: RNCC: 3 | RNVC: 2
ANXP25X100: RNCC: 3 | RNVC: 2
3148517755604: RNCC: 5 | RNVC: 2

24 Nov 2008

5120-14-215-2399
Cle Speciale

142152399
PR46378: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-281-9211

5120-14-566-4408
Mechanical Puller

145664408
62519091AA: RNCC: 3 | RNVC: 2
104909: RNCC: 5 | RNVC: 1

16 Nov 2010

5120-14-561-0452
Socket Head Screw Key

145610452
5001008608: RNCC: 3 | RNVC: 2

10 Jun 2009

5120-14-249-0620

5120-14-426-8294
Socket Head Screw Key

144268294
0419-40047: RNCC: 3 | RNVC: 2

23 Sep 1988

5120-14-382-5693
Electrical Card Extractor

143825693
16928921: RNCC: 3 | RNVC: 2
16928921: RNCC: 5 | RNVC: 9

17 Feb 1983

5120-14-368-1456
Screw Thread Insert Inserter

143681456
01500177700: RNCC: 3 | RNVC: 2

19 Jan 1981

5120-14-338-4787
Spanner Wrench

143384787
C46353: RNCC: 3 | RNVC: 2

6 Nov 1976

5120-14-392-7301
Spanner Wrench

143927301
0-408-52-020: RNCC: 3 | RNVC: 2
O-408-52-020: RNCC: 3 | RNVC: 2
0408-52020: RNCC: 5 | RNVC: 2

7 Apr 1984

5120-14-376-6496
Pliers

143766496
NO PRIMARY REF14-376-6496: RNCC: 3 | RNVC: 2
2827-4: RNCC: 5 | RNVC: 9

28 Apr 1982

5120-14-285-5315
Appareil Pour Equip

142855315
ANP51M53P1-1A3: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-208-7284

5120-14-475-1002
Axe Pin

144751002
29799653: RNCC: 3 | RNVC: 9

17 Mar 1995

5120-14-484-0375
Segme Monte Douille

144840375
OU141257-2: RNCC: 3 | RNVC: 2
OU141257-2: RNCC: 5 | RNVC: 2
OU141257-2: RNCC: 5 | RNVC: 9
F300 0T 020 6665: RNCC: 6 | RNVC: 9

17 Oct 1996

5120-14-277-3075
Poignee Demontage P

142773075
13599650D: RNCC: 3 | RNVC: 2
59965: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-235-8442

5120-14-319-9738
Outil Dextrac Modul

143199738
11-460-800: RNCC: 3 | RNVC: 2
11-460-800: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-532-0288
Socket Wrench Socket

145320288
JTX.8: RNCC: 3 | RNVC: 2

9 Oct 2002

5120-14-488-3206
Socket Head Screw Key Set

144883206
83SH.JL10: RNCC: 3 | RNVC: 2
0532866: RNCC: 5 | RNVC: 2
0715 311 56: RNCC: 5 | RNVC: 2
3148515328664: RNCC: 5 | RNVC: 2
83SHJL10: RNCC: 5 | RNVC: 2

30 Apr 1997

5120-14-467-2963
Hand Terminal Crimping Tool

144672963
P15073AA: RNCC: 3 | RNVC: 2

4 Jan 1994

5120-14-482-1190
Socket Head Screw Key

144821190
660080: RNCC: 3 | RNVC: 2
1121213E00: RNCC: 5 | RNVC: 2

20 Jun 1996

5120-14-381-4196
Socket Wrench Extension

143814196
7700620770: RNCC: 3 | RNVC: 2
7700620770: RNCC: 3 | RNVC: 2

25 Jan 1983

5120-14-439-7986
Fixed Open End Wrench Set

144397986
44.JU6: RNCC: 3 | RNVC: 2
0529835: RNCC: 5 | RNVC: 2
3148515302602: RNCC: 5 | RNVC: 2
0530260: RNCC: 5 | RNVC: 2
44JU6: RNCC: 5 | RNVC: 2
91355429: RNCC: 5 | RNVC: 2

23 May 1990

5120-14-446-9428
Spanner Wrench

144469428
5975AA K6: RNCC: 2 | RNVC: 2
5975AA K6: RNCC: 3 | RNVC: 2

17 Apr 1991

5120-14-299-9753
Socket Wrench Handle

142999753
K151K125: RNCC: 3 | RNVC: 2
C150C125: RNCC: 3 | RNVC: 2
K151K120: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-406-7841
Spanner Wrench

144067841
TZ691: RNCC: 3 | RNVC: 2
TZ691: RNCC: 5 | RNVC: 9

8 Jan 1986

5120-14-368-8891
Combination Box And Open End Wrench

143688891
02240084400: RNCC: 3 | RNVC: 2
022400844: RNCC: 5 | RNVC: 2

10 Mar 1981

5120-14-313-7228
Face Spanner Wrench Socket

143137228
C47025: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-223-8180

5120-14-559-4519

5120-14-569-0328
Mechanical Puller

145690328
F27374000: RNCC: 3 | RNVC: 2
F27374000: RNCC: 5 | RNVC: 2

1 Aug 2011

5120-14-373-8656
Rode Joint Culasse

143738656
25545968300: RNCC: 3 | RNVC: 2
255459683: RNCC: 5 | RNVC: 9

13 Nov 1981

5120-14-277-8483

5120-14-224-9891

5120-14-494-0816
Tuyau

144940816
P3531916: RNCC: 3 | RNVC: 2
F300 0T 015 3815: RNCC: 6 | RNVC: 9

15 Oct 1997

5120-14-509-2386
Cross Tip Screwdriver

145092386
181/8: RNCC: 3 | RNVC: 2
91762609: RNCC: 5 | RNVC: 2
91762609: RNCC: 5 | RNVC: 9

21 Oct 1998

5120-14-461-0137
Screw Thread Insert Inserter

144610137
23521003000: RNCC: 3 | RNVC: 2
M307M3: RNCC: 5 | RNVC: 2
91642788: RNCC: 5 | RNVC: 2

17 Feb 1993

5120-14-280-3274
Rodoir

142803274
403737T: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-481-2915
Jeweler's Assembly Block Set

144812915
5555: RNCC: 3 | RNVC: 2
5555: RNCC: 5 | RNVC: 2
6645AA8022056: RNCC: 6 | RNVC: 9

25 Apr 1996

5120-14-228-0794

5120-14-280-1413

5120-14-365-1635

5120-14-359-7564
Spanner Wrench

143597564
A132499-1: RNCC: 3 | RNVC: 2
100497: RNCC: 5 | RNVC: 2

15 Oct 1979

5120-14-416-1472
Fixed Open End Wrench Set

144161472
50: RNCC: 3 | RNVC: 2

3 Jun 1987

5120-14-459-1609
Bearing And Bushing Remover

144591609
45056129: RNCC: 3 | RNVC: 2
45056129: RNCC: 5 | RNVC: 9

19 Nov 1992

5120-14-509-0330
Screw Thread Insert Inserter

145090330
01500230400: RNCC: 3 | RNVC: 2

14 Oct 1998

5120-14-399-1109
Valve Spring Compressor

143991109
5000261302: RNCC: 3 | RNVC: 2

6 Mar 1985

5120-14-362-4743
Socket Wrench Socket

143624743
8810600114: RNCC: 3 | RNVC: 2

19 Mar 1980

5120-14-490-8952
Lames

144908952
4067 420 001 360: RNCC: 3 | RNVC: 2
F300 0T 000 5232: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-240-5527

5120-14-200-9310

5120-14-571-4445
Torque Wrench Adapter Set

145714445
62901-OF32825: RNCC: 3 | RNVC: 2

27 Mar 2012

5120-14-452-6573
Cone De Guidage

144526573
F46257: RNCC: 3 | RNVC: 2

15 Jan 1992

5120-14-289-1419
Socket Head Screw Key

142891419
0122980: RNCC: 3 | RNVC: 2
82-1: RNCC: 5 | RNVC: 2
82.1: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-488-3150
Screwdriver Handle

144883150
AMHB.1: RNCC: 3 | RNVC: 2
0007165: RNCC: 5 | RNVC: 2
3148510071657: RNCC: 5 | RNVC: 2
AMHB1: RNCC: 5 | RNVC: 2

30 Apr 1997

5120-14-362-1745
Faux Mors

143621745
C46342: RNCC: 3 | RNVC: 2

20 Feb 1980

5120-14-574-2405
Socket Head Screw Key

145742405
89S.20: RNCC: 3 | RNVC: 2
126972: RNCC: 5 | RNVC: 2
3148511269725: RNCC: 5 | RNVC: 2

18 Dec 2012

5120-14-224-2541
Combination Box And Open End Wrench

142242541
50 25-32: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-574-5019
Socket Wrench Socket

145745019
NS.14A: RNCC: 3 | RNVC: 2
3148516546296: RNCC: 5 | RNVC: 2
654629: RNCC: 5 | RNVC: 2

24 Jan 2013

5120-14-564-3213
Screwdriver Bit

145643213
ED.662: RNCC: 3 | RNVC: 2
22690: RNCC: 5 | RNVC: 2
91840229: RNCC: 5 | RNVC: 9

22 Apr 2010

5120-14-548-6468
Socket Wrench Socket

145486468
SJ.9H: RNCC: 3 | RNVC: 2

27 Jan 2006

5120-14-352-8686

5120-14-565-9726
Machining Drill Jig

145659726
529124: RNCC: 3 | RNVC: 2

7 Oct 2010

5120-14-429-1565
Outillage Simbleau

144291565
530731: RNCC: 3 | RNVC: 2

11 Jan 1989

5120-14-242-0808

5120-14-237-7650
Molette Caoutchouc

142377650
6451: RNCC: 3 | RNVC: 9
6451: RNCC: 5 | RNVC: 2
F300 0T 016 5932: RNCC: 6 | RNVC: 9

1 Jan 1967

5120-14-362-7532

5120-14-240-3523

5120-14-270-5174
Cle De Casque Dheli

142705174
0960-45-77-16412DET4: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-304-4055
Spanner Wrench

143044055
TMY20-28-303: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-360-3094
Socket Wrench Socket

143603094
NO PRIMARY REF14-360-3094: RNCC: 3 | RNVC: 2
J1: RNCC: 5 | RNVC: 9

23 Nov 1979

5120-14-289-3320

5120-14-368-4029
Equipe Embout

143684029
MKM0436700: RNCC: 3 | RNVC: 2
MKM0436700: RNCC: 5 | RNVC: 2

20 Feb 1981

5120-14-297-5960

5120-14-316-1627
App Montag Roulemen

143161627
A125827: RNCC: 3 | RNVC: 2
100148: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-283-2284

5120-14-264-5049
Cle

142645049
276173: RNCC: 3 | RNVC: 2
276173: RNCC: 5 | RNVC: 9

1 Jan 1970

5120-14-446-8328
Cross Tip Screwdriver

144468328
ADB.0X40: RNCC: 3 | RNVC: 2
3148510045962: RNCC: 5 | RNVC: 2
ADB 0X40: RNCC: 5 | RNVC: 2
91711987: RNCC: 5 | RNVC: 2
ADB.0: RNCC: 5 | RNVC: 9
0004596: RNCC: 5 | RNVC: 9
ADB0: RNCC: 5 | RNVC: 9

17 Apr 1991

5120-14-532-0287
Flat Tip Screwdriver

145320287
AEF.2,5X75E: RNCC: 3 | RNVC: 2

9 Oct 2002

5120-14-490-1400
Piston Ring Compressor

144901400
213-5: RNCC: 3 | RNVC: 2

17 Sep 1997

5120-14-541-8932
Pliers

145418932
M-125-6: RNCC: 3 | RNVC: 2

2 Jul 2004

5120-14-515-5346
Final Drive Assembly Alignment Pin

145155346
150G4368: RNCC: 3 | RNVC: 2

21 Jul 1999

5120-14-415-4711
Joint Breaking Wedge

144154711
4726: RNCC: 3 | RNVC: 2

18 May 1987

5120-14-476-9421
Bearing Staking Installation Tool

144769421
5001007805: RNCC: 3 | RNVC: 2

12 Jul 1995

5120-14-236-8754
Spanner Wrench

142368754
0057-78: RNCC: 3 | RNVC: 2
RA57: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-526-3694
Hand Helical Spring Puller Hook

145263694
131236: RNCC: 3 | RNVC: 2

25 Jul 2001

5120-14-444-8978
Flat Tip Screwdriver

144448978
0882647C00: RNCC: 3 | RNVC: 2

28 Jan 1991

5120-14-524-9279
Flat Tip Screwdriver

145249279
AZF.6,5X150: RNCC: 3 | RNVC: 2

3 May 2001

5120-14-561-2170
Socket Wrench Socket

145612170
K.41HB: RNCC: 3 | RNVC: 2
0660050: RNCC: 5 | RNVC: 2
660050: RNCC: 5 | RNVC: 2

29 Jun 2009

5120-14-243-7475

5120-14-276-3238
Swivel Knob Jeweler's Screwdriver

142763238
NO PRIMARY REF14-276-3238: RNCC: 3 | RNVC: 2
C0PSAT1875L18SAT1875N: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-543-6351
Socket Wrench Socket Set

145436351
S.401AVSE: RNCC: 3 | RNVC: 2

27 Nov 2004

5120-14-524-1042
Retaining Ring Pliers

145241042
199E.9: RNCC: 3 | RNVC: 2
146183: RNCC: 5 | RNVC: 2
3148511461839: RNCC: 5 | RNVC: 2
199E-9: RNCC: 5 | RNVC: 2

28 Feb 2001

5120-14-297-1110
Hand Crank

142971110
063V34-118-2: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-262-4680

5120-14-538-8815
Spanner Wrench

145388815
NGM0022030200460: RNCC: 2 | RNVC: 2

9 Dec 2003

5120-14-526-8822
Socket Wrench Socket

145268822
10459835: RNCC: 3 | RNVC: 2

12 Sep 2001

5120-14-416-4861
Controle Appareil

144164861
6144: RNCC: 3 | RNVC: 2

10 Jun 1987

5120-14-436-0239
Cle Serrage Butee

144360239
807654: RNCC: 3 | RNVC: 2

29 Nov 1989

5120-14-281-2988
Extracteur Siege De

142812988
C46939: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-228-1580

5120-14-491-0077
Presse

144910077
4602 000 600 017: RNCC: 3 | RNVC: 2
F300 0T 001 0850: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-493-1829
Cle

144931829
139745W: RNCC: 3 | RNVC: 2
F300 0T 011 0148: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-542-9377
Engine Valve Seat Insert Replacing Tool

145429377
8460005: RNCC: 3 | RNVC: 2
8460005: RNCC: 5 | RNVC: 2

14 Aug 2004

5120-14-387-7332
Electrical Card Extractor

143877332
20111426: RNCC: 3 | RNVC: 2
20111426: RNCC: 5 | RNVC: 9

12 Oct 1983

5120-14-384-1986
Faux Mors

143841986
26-281-8: RNCC: 3 | RNVC: 2

4 May 1983

5120-14-578-6757
Socket Wrench Screwdriver Attachment

145786757
14100067106: RNCC: 3 | RNVC: 2

18 Dec 2013

5120-14-570-1896
Socket Wrench Socket

145701896
UFA33154: RNCC: 3 | RNVC: 2

25 Nov 2011

5120-14-263-1953

5120-14-219-3270

5120-14-551-0053
Vise Jaw Caps

145510053
F47658: RNCC: 3 | RNVC: 2

18 Aug 2006

5120-14-219-2159

5120-14-302-6618

5120-14-573-3093
Open End Wrench

145733093
FAQV7 096 12 P 243 021 CLE COUR: RNCC: 3 | RNVC: 2

3 Oct 2012

5120-14-556-8532
Face Spanner Wrench Socket

145568532
06C359: RNCC: 3 | RNVC: 2

16 Apr 2008

5120-14-295-2738
Outil Collage Miroi

142952738
41052: RNCC: 3 | RNVC: 2
41052: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-338-4684
Equipe Bague Darret

143384684
GA46257: RNCC: 3 | RNVC: 2

6 Nov 1976

5120-14-501-7755
Mechanical Puller Attachment

145017755
1X56 136 445: RNCC: 3 | RNVC: 2
1X56 136 445: RNCC: 5 | RNVC: 2

7 Nov 1997

5120-14-425-5991
Socket Wrench Socket

144255991
NS.1/2: RNCC: 3 | RNVC: 2
0714 13 04: RNCC: 5 | RNVC: 2
3148510424408: RNCC: 5 | RNVC: 2
0042440: RNCC: 5 | RNVC: 9

12 Jul 1988

5120-14-571-7361
Screwdriver Bit

145717361
E-111-T30: RNCC: 3 | RNVC: 2

26 Apr 2012

5120-14-578-1884
Mechanical Puller S

145781884
8818836202: RNCC: 3 | RNVC: 2

7 Nov 2013

5120-14-380-6769
A Levie Serre-Joint

143806769
G20H: RNCC: 3 | RNVC: 2

29 Nov 1982

5120-14-226-6561

5120-14-499-6703
Cle

144996703
E03-3372: RNCC: 3 | RNVC: 2
F300 0T 023 6524: RNCC: 6 | RNVC: 9

29 Oct 1997

5120-14-491-8860
Cle

144918860
NO PRIMARY REF14-491-8860: RNCC: 3 | RNVC: 2
23217460: RNCC: 5 | RNVC: 9
F300 0T 005 8731: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-451-2692
Graissage Outillage

144512692
MMG060-10: RNCC: 3 | RNVC: 2
MMG060-10: RNCC: 5 | RNVC: 2

6 Nov 1991

5120-14-415-2554
Outil Emmanchement

144152554
6801D23022-701: RNCC: 3 | RNVC: 2
85-692-9473: RNCC: 6 | RNVC: 9

22 Apr 1987

5120-14-251-9639
Socket Head Screw Key

142519639
NO PRIMARY REF14-251-9639: RNCC: 3 | RNVC: 2
250UCET200UC: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-308-7868
Hose Wire Band Clamping Tool

143087868
81-01-01: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-406-9441
Spanner Wrench

144069441
853-700-116-0: RNCC: 3 | RNVC: 2

22 Jan 1986

5120-14-573-6326
Open End Wrench

145736326
B013719: RNCC: 3 | RNVC: 2

25 Oct 2012

5120-14-395-7394
Torque Wrench Adapter

143957394
46AM054: RNCC: 3 | RNVC: 2

30 Oct 1984

5120-14-544-7779
Detent Handling Tool

145447779
6501CDC120: RNCC: 3 | RNVC: 2

23 Feb 2005

5120-14-343-6051
Screwdriver Bit Set And Handle

143436051
AFM: RNCC: 3 | RNVC: 2
MAG1: RNCC: 3 | RNVC: 2

16 Jun 1977

5120-14-393-0306
Open End Wrench

143930306
10-17X19CP: RNCC: 3 | RNVC: 2

12 Apr 1984

5120-14-488-3558
Bearing And Bushing Inserter

144883558
P43579: RNCC: 3 | RNVC: 2

30 Apr 1997

5120-14-552-2687
Bearing And Bushing Remover

145522687
472990481: RNCC: 3 | RNVC: 2

7 Dec 2006

5120-14-428-2786
Electrical Connector Inserter

144282786
15A9835: RNCC: 3 | RNVC: 2

8 Dec 1988

5120-14-295-1806
Piston Ring Compressor

142951806
582TERBPL140X145: RNCC: 3 | RNVC: 9
0948700702: RNCC: 5 | RNVC: 2
0948700702: RNCC: 5 | RNVC: 9
948700702: RNCC: 5 | RNVC: 9
MUL582TERBPL140X145: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-461-0204
Socket Wrench Socket

144610204
45215147: RNCC: 3 | RNVC: 2
45215147: RNCC: 5 | RNVC: 9

17 Feb 1993

5120-14-384-7621
Electrical Card Extractor

143847621
20198030: RNCC: 3 | RNVC: 2
20198030: RNCC: 5 | RNVC: 9

2 Jun 1983

5120-14-264-9607
Spanner Wrench

142649607
0562-78: RNCC: 3 | RNVC: 2
RA562: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-215-2398

5120-14-208-6382

5120-14-348-2031

5120-14-576-3382
Inserter And Remove

145763382
80Y0042302: RNCC: 3 | RNVC: 2

12 Jun 2013

5120-14-371-3724
Engrenage Pompe Cle

143713724
003868035M: RNCC: 3 | RNVC: 2

5 Aug 1981

5120-14-389-8332
Controleur Detanche

143898332
26545903700: RNCC: 3 | RNVC: 2
265459037: RNCC: 5 | RNVC: 2
265459037: RNCC: 5 | RNVC: 9

20 Dec 1983

5120-14-548-5054
Spring Inserter And Remover

145485054
IT14SABRE: RNCC: 3 | RNVC: 2

23 Jan 2006

5120-14-328-7959
Wrench Extension Handle

143287959
8810829038: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-380-8364
Spanner Wrench

143808364
C46142: RNCC: 3 | RNVC: 2

14 Dec 1982

5120-14-344-3804

5120-14-325-6124
Corps Dextracteur

143256124
474019: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-281-1860

5120-14-380-8381
Spanner Wrench

143808381
C46152: RNCC: 3 | RNVC: 2

14 Dec 1982

5120-14-410-3840
Outillage-Tube

144103840
15737-514: RNCC: 3 | RNVC: 2

18 Jun 1986

5120-14-371-9920

5120-14-574-3092
Hand Hammer

145743092
1262H.100: RNCC: 3 | RNVC: 2
772457: RNCC: 5 | RNVC: 2
3148517724570: RNCC: 5 | RNVC: 2

7 Jan 2013

5120-14-200-9838

5120-14-264-3436

5120-14-565-0678
Quick Adjusting Screw Clamp

145650678
MXI1B3001010: RNCC: 3 | RNVC: 2

5 Jul 2010

5120-14-264-5970

5120-14-221-8232

5120-14-278-0823
Torque Wrench Adapter

142780823
DC-0-1/2: RNCC: 3 | RNVC: 2
3272670291218: RNCC: 5 | RNVC: 2
DC01-2: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-378-3160
Socket Head Screw Key

143783160
0123045: RNCC: 3 | RNVC: 2
82-4-5: RNCC: 5 | RNVC: 2
82.4,5: RNCC: 5 | RNVC: 2

20 Jul 1982

5120-14-522-0247
Vis A Fen Tournevis

5120-14-241-1456
Cle A Ergots Specia

142411456
0637-78: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-277-0283
Bride Depose Cloche

142770283
521677: RNCC: 3 | RNVC: 2
89414879: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-391-6478

5120-14-316-6618

5120-14-222-8280

5120-14-577-3600
Spanner Wrench

145773600
14100077878: RNCC: 3 | RNVC: 2

9 Sep 2013

5120-14-317-0696

5120-14-249-6778
Cle A Fourche Speci

142496778
2-02544: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-201-3483
Socket Wrench Handle

142013483
S.141: RNCC: 3 | RNVC: 2
3148510567204: RNCC: 5 | RNVC: 2
S141: RNCC: 5 | RNVC: 2
0056720: RNCC: 5 | RNVC: 9

1 Jan 1962

5120-14-489-5571
A Ergot Douille

144895571
50422: RNCC: 3 | RNVC: 2
OU50422: RNCC: 5 | RNVC: 2

30 Jul 1997

5120-14-557-7346
Watchmaker's Blower

145577346
60579: RNCC: 3 | RNVC: 2

8 Jul 2008

5120-14-417-4608
Screwdriver Bit Set And Handle

144174608
15200: RNCC: 3 | RNVC: 2
16400104-3: RNCC: 5 | RNVC: 2
F300 0T 006 8645: RNCC: 6 | RNVC: 9

8 Jul 1987

5120-14-415-6537
Positionnemen Outil

144156537
MJK243-01: RNCC: 3 | RNVC: 2
MJK243-01: RNCC: 5 | RNVC: 2

18 May 1987

5120-14-308-1028
Douille Tournevis

143081028
9970-115-593: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-212-7981
Spanner Wrench

142127981
7062RURE72-50-100: RNCC: 3 | RNVC: 9

1 Jan 1964

5120-14-491-5778
Cle

144915778
NO PRIMARY REF14-491-5778: RNCC: 3 | RNVC: 2
7CFS: RNCC: 5 | RNVC: 9
F300 0T 003 4097: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-366-0255
Regla Maquet Cadran

143660255
NO PRIMARY REF14-366-0255: RNCC: 3 | RNVC: 2
42-25-04-394: RNCC: 5 | RNVC: 9

4 Nov 1980

5120-14-257-4389
Open End Wrench

142574389
NO PRIMARY REF14-257-4389: RNCC: 3 | RNVC: 2
144K20: RNCC: 5 | RNVC: 9

1 Jan 1969

5120-14-353-4702
Spanner Wrench

143534702
99007-45000: RNCC: 3 | RNVC: 2
99007-4500: RNCC: 5 | RNVC: 2

16 Jan 1979

5120-14-389-7585
Sertissage Matrice

143897585
483350-1: RNCC: 3 | RNVC: 2
85-692-4512: RNCC: 6 | RNVC: 9

20 Dec 1983

5120-14-225-5619
Extracteur De Joint

142255619
536BM1DET19: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-281-2970

5120-14-557-7661
Adjustable Wrench

145577661
SATE 10202: RNCC: 3 | RNVC: 2

9 Jul 2008

5120-14-255-2922

5120-14-513-3796
Cross Tip Screwdriver

145133796
AZPB.1X40: RNCC: 3 | RNVC: 2

17 Mar 1999

5120-14-503-5306
Hand Sheet Metal Groover

145035306
148104: RNCC: 3 | RNVC: 9

19 Jan 1998

5120-14-466-3709
Open End Wrench

144663709
61AM007: RNCC: 3 | RNVC: 2

3 Nov 1993

5120-14-222-6954

5120-14-241-4205

5120-14-403-7065
De Reglage Montage

144037065
193-23391J: RNCC: 3 | RNVC: 2

21 Aug 1985

5120-14-293-4601

5120-14-386-6784
Spanner Wrench

143866784
853-115-031-0: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-444-3146

5120-14-226-0662
Flat Tip Screwdriver

142260662
9970-115-044: RNCC: 3 | RNVC: 2
9970-115-044-00: RNCC: 5 | RNVC: 2

1 Jan 1966

5120-14-245-3269

5120-14-247-9652
Cle A Oeil

142479652
RT20784: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-523-8145
Sleeve Stretching Pliers

145238145
454.3: RNCC: 3 | RNVC: 2

2 Feb 2001

5120-14-342-8770
Quick Adjusting Screw Clamp

143428770
4-120: RNCC: 3 | RNVC: 2

16 May 1977

5120-14-338-4738

5120-14-251-3090

5120-14-407-7466
Nettoyage Crochet

144077466
544087: RNCC: 3 | RNVC: 2

27 Feb 1986

5120-14-282-5870

5120-14-214-1843
Bague De Montage

142141843
PR46034: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-247-3713
Broche Speciale

142473713
PR47568: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-491-9343
Cle

144919343
229545F: RNCC: 3 | RNVC: 2
F300 0T 006 1216: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-233-5233

5120-14-517-7823
Open End Wrench

145177823
B03-4222: RNCC: 3 | RNVC: 2

13 Jan 2000

5120-14-364-1515
Open End Wrench

143641515
607495: RNCC: 3 | RNVC: 2
44-7-16X1-2CP: RNCC: 3 | RNVC: 2
UD7/16X1/2: RNCC: 3 | RNVC: 2
12106-7/16X1/2: RNCC: 5 | RNVC: 2

7 Aug 1980

5120-14-466-3711
Spanner Wrench

144663711
61AM012: RNCC: 3 | RNVC: 2

3 Nov 1993

5120-14-483-8699
Spanner Wrench

144838699
0-704742-1: RNCC: 3 | RNVC: 2

5 Oct 1996

5120-14-350-5387
Flat Tip Screwdriver

143505387
525254: RNCC: 3 | RNVC: 2

12 Jul 1978

5120-14-310-5432
Socket Wrench Socket

143105432
0062380: RNCC: 3 | RNVC: 2
M0T253: RNCC: 3 | RNVC: 2
T.152: RNCC: 5 | RNVC: 2
T152: RNCC: 5 | RNVC: 2

1 Jan 1974

5120-14-351-9459
Spanner Wrench

143519459
07916-2830000: RNCC: 3 | RNVC: 2
07916-2830000: RNCC: 5 | RNVC: 2

16 Oct 1978

5120-14-488-7513
Spanner Wrench

144887513
3929.784: RNCC: 3 | RNVC: 2

2 Jun 1997

5120-14-327-0846
Raccord Tige Daccor

143270846
1065998: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-272-3744

5120-14-462-9604
Cle De Depannage

144629604
80426961: RNCC: 3 | RNVC: 2

12 May 1993

5120-14-219-2251

5120-14-295-2522
Hydraulic Jack Handle

142952522
SPA17: RNCC: 3 | RNVC: 9
RASSPA17: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-444-7636
Face Spanner Wrench Socket

144447636
0478-200011: RNCC: 3 | RNVC: 2

21 Jan 1991

5120-14-387-8637
Face Spanner Wrench Socket

143878637
OU50382: RNCC: 3 | RNVC: 2
50382: RNCC: 3 | RNVC: 2
0U50382: RNCC: 5 | RNVC: 2
50382: RNCC: 5 | RNVC: 9

12 Oct 1983

5120-14-407-3304
Joints Emmanche

144073304
853-201-199-0: RNCC: 3 | RNVC: 2

12 Feb 1986

5120-14-535-8854
Handling Tool Arm

145358854
CK81-4: RNCC: 3 | RNVC: 2
000H319898360-024B1017MM: RNCC: 5 | RNVC: 2
000H319898360-024REP100: RNCC: 5 | RNVC: 2
SYQ2952: RNCC: 5 | RNVC: 2

25 Jun 2003

5120-14-217-9968

5120-14-332-1136

5120-14-375-3101

5120-14-313-7255
Spanner Wrench

143137255
C47181: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-283-6538

5120-14-321-1535
Open End Wrench

143211535
10-3-2X5-5: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-237-8564

5120-14-571-2252
Hand Terminal Crimping Tool

145712252
985913: RNCC: 3 | RNVC: 2
FACOM 985913: RNCC: 5 | RNVC: 2

1 Mar 2012

5120-14-338-4785
Spanner Wrench

143384785
C46320-1: RNCC: 3 | RNVC: 2

6 Nov 1976

5120-14-438-9614
Bearing And Bushing Remover

144389614
330A98-2058-00: RNCC: 3 | RNVC: 2

11 Apr 1990

5120-14-396-4138
Etancheite Ob Outil

143964138
6274-51029: RNCC: 3 | RNVC: 2
6274-2810120: RNCC: 5 | RNVC: 2

27 Nov 1984

5120-14-382-1297
Faux Arbre Demontag

143821297
NO PRIMARY REF14-382-1297: RNCC: 3 | RNVC: 2
20C8328: RNCC: 5 | RNVC: 9

25 Jan 1983

5120-14-310-3122
Outils Montage Demo

143103122
GSM524-001REP50F6: RNCC: 3 | RNVC: 2
GSM524-01REP50: RNCC: 5 | RNVC: 2

1 Jan 1974

5120-14-466-5932
Bearing And Bushing Remover

144665932
851-500-024-0: RNCC: 3 | RNVC: 2

17 Nov 1993

5120-14-229-8558
Open End Wrench

142298558
194220A: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-247-2123
Mechanical Puller Attachment

142472123
C55616: RNCC: 3 | RNVC: 2
100868: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-449-8745
Plug Electrical Connector Extractor

144498745
60714: RNCC: 3 | RNVC: 2
91705850: RNCC: 5 | RNVC: 2

11 Sep 1991

5120-14-399-8684
Socket Wrench Socket

143998684
005653210P: RNCC: 3 | RNVC: 2

11 Apr 1985

5120-14-470-6199
Spanner Wrench

144706199
1074725M00: RNCC: 3 | RNVC: 2

29 Jun 1994

5120-14-248-5803

5120-14-218-1249

5120-14-336-3729
Te Lot De Rechanges

143363729
9070-985: RNCC: 3 | RNVC: 2

24 Jul 1976

5120-14-390-4841
Emmanche Siege

143904841
DLP750440: RNCC: 3 | RNVC: 2

26 Jan 1984

5120-14-444-3509

5120-14-443-9866

5120-14-412-4175
Raccord Cle Special

144124175
9759-67: RNCC: 3 | RNVC: 2

15 Oct 1986

5120-14-386-6390
Change Aubes Matoir

143866390
9970-126-065: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-491-1962
Boite

144911962
NO PRIMARY REF14-491-1962: RNCC: 3 | RNVC: 2
380: RNCC: 5 | RNVC: 9
F300 0T 001 8475: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-386-1554
Adaptateur Btp

143861554
6801J32-2006-00: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-283-2502

5120-14-241-1455
Extracteur Piston D

142411455
0635-78: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-385-1973
Cle A Impact

143851973
NM.300TA: RNCC: 3 | RNVC: 2
3148510407203: RNCC: 5 | RNVC: 2
NM300TA: RNCC: 5 | RNVC: 2
0040720: RNCC: 5 | RNVC: 9

26 Jul 1983

5120-14-344-6057
T Cle Serr Machoire

143446057
2614132: RNCC: 3 | RNVC: 2

9 Sep 1977

5120-14-287-8762

5120-14-541-3694
Socket Head Screw Key

145413694
344161520: RNCC: 3 | RNVC: 2

3 Jun 2004

5120-14-325-0267
Turbi Socle De Pres

143250267
0S20189: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-572-7243
Hose Strap Band Clamping Tool

145727243
7 027 900: RNCC: 3 | RNVC: 2
71391 052: RNCC: 5 | RNVC: 9

26 Jul 2012

5120-14-248-5169
Spanner Wrench

142485169
PR46757: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-414-5641
Open End Wrench

144145641
NO PRIMARY REF14-414-5641: RNCC: 3 | RNVC: 2
121A847: RNCC: 5 | RNVC: 2

11 Feb 1987

5120-14-528-0822
Bearing And Bushing Remover

145280822
365A93-3111-01: RNCC: 3 | RNVC: 2

12 Dec 2001

5120-14-522-0283
Socket Wrench Socket

145220283
OCE89-82D: RNCC: 3 | RNVC: 2
0CE89-82D: RNCC: 5 | RNVC: 2

29 Sep 2000

5120-14-475-6953
Open End Wrench

144756953
NO PRIMARY REF14-475-6953: RNCC: 3 | RNVC: 2
SP4910: RNCC: 5 | RNVC: 2
91741766: RNCC: 5 | RNVC: 2

26 Apr 1995

5120-14-513-7368
Flat Tip Screwdriver

145137368
ENFD6561-1X5-5X150: RNCC: 3 | RNVC: 2

9 Apr 1999

5120-14-494-3566
Spanner Wrench

144943566
NO PRIMARY REF14-494-3566: RNCC: 3 | RNVC: 2
540102: RNCC: 5 | RNVC: 9
F300 0T 017 0986: RNCC: 6 | RNVC: 9

15 Oct 1997

5120-14-031-9138
Pliers

140319138
193-16EL: RNCC: 3 | RNVC: 2

5 Jul 1980

5120-14-449-6834
Electrical Contact Remover

144496834
OUT-DB-CAL16-20K: RNCC: 3 | RNVC: 2

2 Sep 1991

5120-14-272-3657
Open End Wrench

142723657
E74302C24-27WWW: RNCC: 2 | RNVC: 1

1 Jan 1971

5120-14-436-4803
Bearing And Bushing Inserter And Remover

144364803
6802K33-1035-10: RNCC: 3 | RNVC: 2

3 Jan 1990

5120-14-393-4126
Socket Head Screw Key

143934126
64-M16: RNCC: 3 | RNVC: 2
64.M16: RNCC: 3 | RNVC: 2
81-16: RNCC: 3 | RNVC: 2
3272670227057: RNCC: 5 | RNVC: 2
3148511226209: RNCC: 5 | RNVC: 2

7 Apr 1984

5120-14-319-2429
Craftsman's Tweezers

143192429
103: RNCC: 3 | RNVC: 9

1 Jan 1975

5120-14-368-0378
Screwdriver Bit

143680378
ES.212: RNCC: 3 | RNVC: 2
3148510246628: RNCC: 5 | RNVC: 2
0024662: RNCC: 5 | RNVC: 9
ESS13: RNCC: 5 | RNVC: 9

19 Jan 1981

5120-14-309-7451

5120-14-247-1959

5120-14-485-5880
Spanner Wrench

144855880
PL1NA003AA012624: RNCC: 3 | RNVC: 2

30 Jan 1997

5120-14-476-3287
Retaining Ring Pliers

144763287
479.32: RNCC: 3 | RNVC: 2
479.AS: RNCC: 5 | RNVC: 2

7 Jun 1995

5120-14-515-5335
Final Drive Assembly Alignment Pin

145155335
150G4356: RNCC: 3 | RNVC: 2

21 Jul 1999

5120-14-207-0906
Vise Jaw Caps

142070906
1287: RNCC: 3 | RNVC: 2
1287-100: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-250-0096

5120-14-539-2588
Mechanical Puller Step Plate

145392588
T623G3005223: RNCC: 3 | RNVC: 2

17 Dec 2003

5120-14-552-8409
Retaining Ring Pliers

145528409
177E.15: RNCC: 3 | RNVC: 2
177E.15: RNCC: 5 | RNVC: 2
3148511408322: RNCC: 5 | RNVC: 2

7 Feb 2007

5120-14-253-4979
Levier Tendeur A Ca

142534979
500018: RNCC: 3 | RNVC: 2
500018: RNCC: 5 | RNVC: 2
500018: RNCC: 5 | RNVC: 9
STI263S1-3: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-300-5569
Tete A Sertir

143005569
69069: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-575-1411
Mechanical Puller Adapter

145751411
U.53E14: RNCC: 3 | RNVC: 2
70361: RNCC: 5 | RNVC: 2
3148510703619: RNCC: 5 | RNVC: 9

15 Mar 2013

5120-14-417-5772
Hand Terminal Crimping Tool

144175772
90277-1: RNCC: 3 | RNVC: 2
162-5717: RNCC: 5 | RNVC: 2

15 Jul 1987

5120-14-559-8142
Socket Head Screw Key

145598142
LTX1022495/1: RNCC: 3 | RNVC: 2

19 Feb 2009

5120-14-566-9466
Open End Wrench

145669466
SEM081592415020: RNCC: 3 | RNVC: 2

19 Jan 2011

5120-14-486-5681
Outillage

144865681
RT21782: RNCC: 3 | RNVC: 2

25 Mar 1997

5120-14-298-5517

5120-14-378-9606

5120-14-570-6387
Six Point Tip Screwdriver

145706387
TB-15X80: RNCC: 3 | RNVC: 2

13 Jan 2012

5120-14-378-5521
Bearing And Bushing Inserter

143785521
6802J32-1658-00: RNCC: 3 | RNVC: 2
6802360A32-1658-00: RNCC: 5 | RNVC: 2

11 Aug 1982

5120-14-491-7680
Cliquet

144917680
NO PRIMARY REF14-491-7680: RNCC: 3 | RNVC: 2
120090-405: RNCC: 5 | RNVC: 9
F300 0T 004 1833: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-466-7648
Screwdriver Bit

144667648
96162620: RNCC: 3 | RNVC: 2
96162620: RNCC: 5 | RNVC: 9

24 Nov 1993

5120-14-321-9941
Socket Wrench Socket

143219941
02640900200: RNCC: 3 | RNVC: 2
026409002: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-313-4680
Screwdriver Bit

143134680
AMR2: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-478-3318
Socket Head Screw Key Blade

144783318
1100482C00: RNCC: 3 | RNVC: 2

25 Oct 1995

5120-14-407-2050
Bearing And Bushing Inserter

144072050
100793: RNCC: 3 | RNVC: 2

12 Feb 1986

5120-14-511-3874
Flat Tip Screwdriver

145113874
AZFH.12X250: RNCC: 3 | RNVC: 2
AZFH.12X250: RNCC: 5 | RNVC: 2
13441: RNCC: 5 | RNVC: 2
3148510134413: RNCC: 5 | RNVC: 2
0613 232 12: RNCC: 5 | RNVC: 2
0613 240 12: RNCC: 5 | RNVC: 2

16 Dec 1998

5120-14-421-3378
Socket Wrench Spanner Attachment

144213378
536747: RNCC: 3 | RNVC: 2
0935 48 30: RNCC: 5 | RNVC: 2

14 Jan 1988

5120-14-532-0293
Socket Head Screw Socket Wrench Attachment Wrench Set

145320293
PL.321: RNCC: 3 | RNVC: 2

9 Oct 2002

5120-14-526-1549
Socket Wrench Screwdriver Attachment

145261549
103247: RNCC: 3 | RNVC: 2
0315101244: RNCC: 5 | RNVC: 2

4 Jul 2001

5120-14-466-3757
Spanner Wrench

144663757
M47079: RNCC: 3 | RNVC: 2

3 Nov 1993

5120-14-375-8053
Spanner Wrench

143758053
300A99389: RNCC: 3 | RNVC: 2
91372597: RNCC: 5 | RNVC: 2
300A99389: RNCC: 5 | RNVC: 2
300A99389: RNCC: 5 | RNVC: 9
300A99389: RNCC: 5 | RNVC: 9

30 Mar 1982

5120-14-397-4857
Terminal Crimping Tool Contact Positioner

143974857
73025006: RNCC: 3 | RNVC: 2

14 Dec 1984

5120-14-510-7171
Pliers

145107171
CK3772-120: RNCC: 3 | RNVC: 2

9 Nov 1998

5120-14-441-2375
Hand Terminal Crimping Tool

144412375
703A93-0901-10: RNCC: 3 | RNVC: 2

22 Aug 1990

5120-14-394-0557
Retaining Ring Pliers

143940557
196-17: RNCC: 3 | RNVC: 2
945-180: RNCC: 3 | RNVC: 9
3272670244016: RNCC: 5 | RNVC: 2
DEM945-180: RNCC: 5 | RNVC: 9
85-692-5712: RNCC: 6 | RNVC: 9

23 Jun 1984

5120-14-431-2570
Bearing And Bushing Inserter And Remover

144312570
330A93-6312-00: RNCC: 3 | RNVC: 2

12 Apr 1989

5120-14-319-1545
Bloc Pre-Sertissage

143191545
REPS4F32X1K: RNCC: 3 | RNVC: 2
RPS4F30X32K: RNCC: 5 | RNVC: 2
RPS6F32X1K: RNCC: 5 | RNVC: 2
85-688-0835: RNCC: 6 | RNVC: 9

1 Jan 1975

5120-14-031-9655
Freinage Vis Outil

140319655
M31-111: RNCC: 3 | RNVC: 2
M31-111: RNCC: 5 | RNVC: 9

5 Jul 1980

5120-14-316-5884
Socket Head Screw Key

143165884
582446: RNCC: 3 | RNVC: 9

1 Jan 1975

5120-14-347-1219
Socket Wrench Socket

143471219
NS.10: RNCC: 3 | RNVC: 2
3148510420202: RNCC: 5 | RNVC: 2
NS10: RNCC: 5 | RNVC: 2
0714 13 03: RNCC: 5 | RNVC: 2
0042020: RNCC: 5 | RNVC: 9

19 Jan 1978

5120-14-422-2462
Socket Wrench Spanner Attachment

144222462
0378-74159: RNCC: 3 | RNVC: 2

24 Feb 1988

5120-14-437-2783
Spanner Wrench

144372783
8814726851: RNCC: 3 | RNVC: 2
89404159: RNCC: 5 | RNVC: 2

24 Jan 1990

5120-14-535-4858
Pliers

145354858
187.16CPE: RNCC: 3 | RNVC: 2
0114326D00: RNCC: 5 | RNVC: 2

31 May 2003

5120-14-290-7589
Spanner Wrench

142907589
3799600: RNCC: 3 | RNVC: 2
37996: RNCC: 3 | RNVC: 9

1 Jan 1972

5120-14-522-6625
Open End Wrench

145226625
RACD63: RNCC: 3 | RNVC: 2

15 Nov 2000

5120-14-405-4354
Mechanical Puller Attachment

144054354
927373: RNCC: 3 | RNVC: 2
927373: RNCC: 5 | RNVC: 9

27 Nov 1985

5120-14-202-0356
Cable Type Ratchet Lever Puller

142020356
SUPERT13: RNCC: 3 | RNVC: 2
EA11: RNCC: 5 | RNVC: 2

1 Jan 1963

5120-14-446-7986
Ve De Suspension

144467986
CH93-1-2: RNCC: 3 | RNVC: 2

16 Apr 1991

5120-14-247-9679
Cle A Douille A Car

142479679
RT20933: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-558-6672
Oil Filter Wrench

145586672
DELT37002: RNCC: 3 | RNVC: 2

24 Oct 2008

5120-14-225-4000

5120-14-377-9228
Spanner Wrench

143779228
126.A180: RNCC: 3 | RNVC: 2
3148511347089: RNCC: 5 | RNVC: 2
126-180: RNCC: 5 | RNVC: 9

10 Jun 1982

5120-14-222-1440
Flat Tip Screwdriver

142221440
BB61-12X200: RNCC: 3 | RNVC: 9

1 Jan 1966

5120-14-306-4012
Open End Wrench

143064012
M3-201: RNCC: 3 | RNVC: 2
M3-201: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-356-5959
Spanner Wrench

143565959
TF10A32415: RNCC: 3 | RNVC: 2
85-688-6562: RNCC: 6 | RNVC: 9

15 May 1979

5120-14-360-5257
Spanner Wrench

143605257
7062RURJ49-35-71IN0XAMAGNETIQUE: RNCC: 2 | RNVC: 2

23 Nov 1979

5120-14-225-1230
Bloc De Presertissa

142251230
A11-25PS: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-260-3547
Outil Demmanchement

142603547
3130-95-33-040: RNCC: 3 | RNVC: 2
85-688-5097: RNCC: 6 | RNVC: 9

1 Jan 1970

5120-14-205-9221
Spanner Wrench

142059221
253-5M362A2: RNCC: 3 | RNVC: 9
RU253-5M362A2: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-441-2132
Ens.Appui

144412132
332A93-3230-10: RNCC: 3 | RNVC: 2

22 Aug 1990

5120-14-337-0059
Spanner Wrench

143370059
C46315M1: RNCC: 3 | RNVC: 2

7 Oct 1976

5120-14-401-2772
Bearing And Bushing Inserter

144012772
101137: RNCC: 3 | RNVC: 2

5 Jun 1985

5120-14-537-3002
Detent Handling Tool

145373002
6501OBD: RNCC: 3 | RNVC: 2

17 Oct 2003

5120-14-347-0227
Face Spanner Wrench Socket

143470227
C47849: RNCC: 3 | RNVC: 2

19 Jan 1978

Load More Results