5120-14-553-8013

May 1969 5120-12-196-4552 Magnetic Retrieving Tool 360/1RNCC: 3 | RNVC: 2 | DAC: 3 11 Jul 1983 5120-14-553-8013

1560-00-438-9991 1560004389991 004389991 BEAM,SUPPORT,DOOR,MAIN LANDING GEAR

5330-14-463-4379 5330144634379 144634379 is a deformable material which prevents the passage of matter through the joint formed when two faces are joined. it may be metallic or nonmetallic, lubricated or impregnated, solid or hollow cross section. it may be made to any predetermined dimension and shape. excludes flat disks, items made of felt material and items having joints. for round metal and plastic items with an aperture and a solid rectangular cross section, see washer, flat; shim; bearing, washer, thrust; and spacer ring. excludes disk, valve; seal, nonmetallic angle; seal, nonmetallic channel; seal, nonmetallic special shaped section; shielding gasket, electronic; and ring, sealing jar.

5315-01-481-9426 5315014819426 014819426 is a cylindrically-shaped headless item, having a shank at one or both ends. it is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. it may be threaded on one end.

5305-01-473-8519 5305014738519 014738519 is a screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. the nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. the head is designed to be held or driven with an inserted driver. it is not designed for rotation by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads.