5120-14-547-0323

3040-01-122-3698 3040011223698 011223698 is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. it usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. it may have accommodations for locking and/or positioning. the point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of connecting link,rigid; wire rope assembly,single leg; and clevis,rod end; and the like. excludes arm (as modified); lever,remote control; and bell crank.

CAGE 1P7M2 De Shane Inc in Prescott, AZ United States

CAGE 1UAP1 Nygord Precision Products Inc in Prescott, AZ United States

3040-01-366-9411 3040013669411 013669411 is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. it must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. the ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. it is not designed for use in aligning by fitting into corresponding holes of another item. for items used to support rotating members see axle(1), shouldered. for items not having any of the above conditions see pin, shoulder, headless. excludes shaft(1), straight; and axle(1), straight.

4810-01-090-4595 4810010904595 010904595 is a manually or power operated valve having three or more ports. the direction of the flow through the various ports is controlled by either one or more reciprocating slide(s) or spool(s) with recess areas which mate with ports in an integral or replaceable ported sleeve, or one or more poppet(s). it is designed to change the direction of fluid flow from one valve port to another. an off (no flow) position is not a flow pattern. the valve is designed to actuate various components of a fluid system. a power operated valve may have a manual override. for items which stop, start, or change the flow of fluid, see: valve, solenoid. excludes valve, plug. see also servovalve, hydraulic; body section, working, linear directional control valve; and valve assembly.