5120-14-488-3041
Hand Hammer
5120144883041 144883041 215-16 3148511489000 2695 511 18 215.16 0148900
A tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified). View more Hand Hammer
Managed by France
NSN Created on 29 Apr 1997
Data Last Changed
July 2023
July 2023
NATO Update Count
1
1
NATO Data Quality
Marketplace 5120-14-488-3041
Need Help?
Request a Quotation from participating marketplace vendors
Request a Quotation from participating marketplace vendors
Related Documents 5120-14-488-3041 5+ Documents (More...)
4730-01-513-9545 4730015139545 015139545 is a fitting having four branches in the same plane whose axes form right angles. the connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or are unthreaded and designed to accomodate a hose. it is designed to be used as a junction at the intersection of hose and/or hose fittings. it may have side inlet(s).
2540-15-144-1857 2540151441857 151441857 BOBINA
5310-66-147-8913 5310661478913 661478913 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.
4730-14-407-6867 4730144076867 144076867 is a straight one-piece fitting 12 inches (304 mm) long or under having the same size fitting on each end (straight machine threads other than pipe or hose series). it may have internal threads on both ends or internal threads on one end and external threads on the other designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. it is designed to join two bosses or boss fittings. excludes items having external threaded connections on both ends.
5305-21-893-8193 5305218938193 218938193 SCREW
Restrictions 5120-14-488-3041
End Users 5120-14-488-3041
- France (ZF)
Approved Sources 5120-14-488-3041
- Part Number
- Manufacturer
- Status
- 215.16
- Manufacturer
- F0541 - Stanley Black & Decker France Sas - (Active)
- Primary Buy
- Primary Buy
- 215-16
- F0541 - Stanley Black & Decker France Sas - (Active)
- Secondary Buy
- Secondary Buy
- 3148511489000
- F0541 - Stanley Black & Decker France Sas - (Active)
- Secondary Buy
- Secondary Buy
- 2695 511 18
- FA1L5 - Wurth France (Active)
- Secondary Buy
- Secondary Buy
- 215.16
- B1638 - Vanas (Active)
- Secondary Buy
- Secondary Buy
- 0148900
- F0541 - Stanley Black & Decker France Sas - (Active)
- Secondary Buy
- Secondary Buy
NATO Stock Numbers Related to 5120-14-488-3041
5120-12-312-8837 5120-98-207-3718 5120-99-313-4539 5120-12-311-2411 5120-14-558-1373 5120-66-153-4228 5120-66-011-0481 5120-22-118-9931 5120-33-209-0686 5120-66-031-3134 5120-12-389-2418 5120-22-607-4825 5120-17-701-3272 5120-99-548-1171 5120-12-328-5579 5120-17-006-9531 5120-99-120-7297 5120-12-336-6837