5120-14-319-2268

| DAC: 3 17 Dec 2002 5120-14-294-0719 Pipe Vise 2002-2RNCC: 5 | RNVC: 2 | DAC: 4 1 Jan 1973 5120-14-319-2268

2540-15-200-3400 2540152003400 152003400 MODULO SPIE

5977-33-200-3400 5977332003400 332003400 is a holder designed to accommodate and position a brush against a commutator or collector ring. also includes items consisting of two or more brush holders (boxes) cast as an inseparable unit. may include facilities for applying pressure to the brush(es) and may also be furnished with the brush(es). see also holder assembly, electrical contact brush.

5310-14-200-3400 5310142003400 142003400 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

6210-01-200-3400 6210012003400 012003400 is a light, with mounting facilities furnished, designed to convey information of a specific nature concerning the circuit in which inserted. must include or provide for the use of a lens as a part of it. for items without a lens, see lampholder, and also see light (1), panel.