What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.

A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Blacksmith's Punch?

A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Mechanical Finger?

A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.

A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Screwdriver And Wrench Assembly?

A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Stakeholder Bench Plate?

A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.

What is a Drill Drift?

A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.

A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Digging Bar?

A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

What is a Valve Spring Lifter?

A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.

What is a Fuse Puller?

A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.

Hand Tools, Nonedged, Nonpowered - France (FR)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by France (FR) - NCB is 14

Page 51 of 110

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by France

51	20	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - France (FR)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 16 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Pipe Vise? 19 Items: A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.
What is a Hand Vise? 25 Items: A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.
What is a Hand Hydraulic Jack? 133 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 153 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 903 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 17 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
Swage,Bottom,Blacksmith's 10 Items
What is a Hand Tube Flaring Tool? 23 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Blacksmith's Punch? 12 Items: A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.
What is a Drain Plug Wrench? 45 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 57 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 16 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 3829 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
Flatter,Blacksmith's 18 Items
Swage,Top,Blacksmith's 12 Items
What is a Pipe Wrench? 110 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 149 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 53 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
Screwdriver,Offset 54 Items
What is a Screwdriver Bit? 707 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Mechanical Finger? 25 Items: A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.
What is a Socket Wrench Socket? 1803 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 1412 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 1641 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 52 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 565 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
Jack,Push-Pull,Screw 30 Items
What is a Hand Tube Bender? 54 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 1106 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 55 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pinch Bar? 19 Items: A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.
What is a Pry Bar? 17 Items: A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.
What is a Wrecking Bar? 15 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 273 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 413 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 32 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 295 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
Face,Hammer,Inserted 25 Items
What is a Hole Sheet Metal Holder? 37 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Screwdriver And Wrench Assembly? 11 Items: A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.
What is a Hand Rivet Set? 121 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Stakeholder Bench Plate? 22 Items: A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.
What is a Drill Drift? 32 Items: A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.
What is a Tack Claw? 15 Items: A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.
Mattock 28 Items
What is a Socket Wrench Handle Bar? 108 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Stake,Sheet Metalworking 50 Items
Riveter,Blind,Hand 76 Items
What is a Hand Shovel? 43 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 98 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 30 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
What is a Digging Bar? 20 Items: A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.
Block,Dolly,Sheet Metalworking 56 Items
What is a Piston Ring Compressor? 34 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Valve Spring Lifter? 29 Items: A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.
What is a Fuse Puller? 20 Items: A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.
What is a Hand Lead Seal Press? 18 Items: A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.
What is a Hand Beading Tool? 91 Items: A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.
What is a Hand Hammer? 502 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
Head,Hand Hammer 81 Items
What is a Lamp Extractor? 76 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Tube Packing Ring Installing Tool? 29 Items: A Tube Packing Ring Installing Tool (INSTALLING TOOL,TUBE PACKING RING) is an item designed to insert packing rings on tubes within tube sheets on condensers and similar heat exchangers. In operation, the packing rings are assembled on the loading pin mandrel and are then transferred from the mandrel on to the tube by means of a tubular sleeve which slides on the mandrel.
What is a Carpenters' Pincers? 18 Items: A Carpenters' Pincers (PINCERS,CARPENTERS') is a plierlike hand tool having two opposing jaws which may have hammerlike backs. One handle has a nail or tack pulling claw, the other is shaped to form a screwdriver. The tool may contain a wire cutter. See also NIPPERS, END CUTTING and PINCERS, FARRIERS'.
What is a Trowel? 33 Items: A Trowel is a tool used for bricklaying, concrete work, plastering, linoleum laying, and masonry work. Excludes CORNER TOOL, CONCRETE.
What is a Hand Abrasive Wheel Dresser? 12 Items: A Hand Abrasive Wheel Dresser (DRESSER,ABRASIVE WHEEL,HAND) is a tool designed to remove glaze from, dress, shape, sharpen, and true solid abrasive wheels. Excludes NIB, DIAMOND, WHEEL DRESSING.
What is a Lamp Cap Extractor? 32 Items: A Lamp Cap Extractor (EXTRACTOR,LAMP CAP) is a tool specifically designed to facilitate the removal of lamp caps from switchboards, panels or indicator lamps.
What is a Rivet Bucking Bar? 51 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 86 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 277 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Woven Cable Grip? 23 Items: A Woven Cable Grip (GRIP,CABLE,WOVEN) is a braided wire device designed to clutch a bare or insulated conductor, cable or wire rope, for holding taut or drawing through conduit.
What is a Screw Thread Insert Extractor? 19 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is an Electron Tube Extractor? 18 Items: An Electron Tube Extractor (EXTRACTOR,ELECTRON TUBE) is a hand tool designed to facilitate the removal of electron tubes from electronic equipment and to avoid burning the fingers. It may be used for installing tubes.
What is a Cross Tip Screwdriver? 362 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 21 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 11 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 37 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Tool Handle Wedge? 10 Items: A Tool Handle Wedge (WEDGE,TOOL HANDLE) is excludes WEDGE, WOOD.
What is a Marlinespike? 16 Items: A Marlinespike is a metal hand tool made in the shape of a tapered pin. One end is pointed and the opposite end may be headed. The body may contain an eye for a lanyard sling, or be grooved lengthwise. Excludes CABLE PICK and FID.
What is an Aligning Punch? 272 Items: An Aligning Punch (PUNCH,ALIGNING) is a round, square, hexagonal or octagonal bodied hand tool, having a round tapered section 6-1/2 inches (165.1 mm) or more in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, DRIFT and DRIFTPIN.
What is a Drift Punch? 25 Items: A Drift Punch (PUNCH,DRIFT) is a round, square, hexagonal, or octagonal bodied hand tool, having a round tapered section 4 to 6 inches (101.6 mm to 152.4 mm) inclusive in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, ALIGNING; and DRIFTPIN.
What is a Putty Knife? 36 Items: A Putty Knife (KNIFE,PUTTY) is a hand tool with a nonedged blade fixed to a handle for laying on and smoothing putty and the like.
What is a Socket Wrench Adapter-Extension? 40 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 30 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 184 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Socket Wrench Ratchet Attachment? 47 Items: A Socket Wrench Ratchet Attachment (RATCHET ATTACHMENT,SOCKET WRENCH) is a connection for socket wrenches and handles. Consists of a ratcheting mechanism with an internal drive on one end and an external drive on the opposite end of the same size. The item is designed to permit continuous rotation of the socket in one direction without removing the socket or handle and without a complete rotation of the handle.
What is a Wrench Extension Handle? 81 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Socket Wrench Crowfoot Attachment? 155 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 33 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 43 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 48 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 2394 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 372 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 300 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 661 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 32 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand-Operated Grommet And Eyelet Press? 12 Items: A Hand-Operated Grommet And Eyelet Press (PRESS,GROMMET AND EYELET,HAND-OPERATED) is a device which punches or pierces holes and in addition fastens or sets eyelets and grommets in cloth, paper and similar material. May be used for fastening or setting rivets, lacing hooks and snaps in cloth, paper and similar material. It is hand operated by lever or screw action. See also PUNCH, EYELET, PLIER TYPE and PRESS, GROMMET AND EYELET, FOOT OPERATED.
What is a Claw Bar? 19 Items: A Claw Bar (BAR,CLAW) is before using, refer to Reference Drawing Group AG.
What is a Shock Type Wheel Stud Nut Wrench? 11 Items: A Shock Type Wheel Stud Nut Wrench (WRENCH,WHEEL STUD NUT,SHOCK TYPE) is a manually operated item designed to remove wheel stud nuts. In operation the inner nut is turned by a socket attached to a shaft on which is a loose swinging weighted handle. The weighted handle may be swung quickly to provide an impact force against the socket to loosen the seized or jammed nuts. The outer nut is held stationary by a separate hexagonal holding wrench.
What is a Drift Pin Set? 30 Items: A Drift Pin Set is a group of DRIFTPIN having different characteristics.
What is a Tire Iron? 25 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 115 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Blacksmith's Vise? 14 Items: A Blacksmith's Vise (VISE,BLACKSMITH'S) is a clamping device consisting of a mounting plate, one stationary and one manual screw actuated jaw and a supporting member extending downward from the stationary jaw to the floor. Designed to be mounted on a bench, table or the like. May include pipe holding jaws.
What is a Machinist's Vise? 64 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Clamp Base Bench Vise? 10 Items: A Clamp Base Bench Vise (VISE,BENCH,CLAMP BASE) is a clamping device consisting of a base, one stationary and one manual screw actuated jaw, and one or more guide bars or rods. Designed with an integral clamp for attaching to a bench, table, or the like. Does not include pipe holding jaws.
What is a Fixed Open End Wrench Set? 86 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Nail Set? 11 Items: A Nail Set is a round knurled, square, hexagonal or octagonal bodied hand tool having a round tapered section terminating in a cupped point. It is designed to set brad head nails below the surface by striking it a hammerlike blow. See also PUNCH, DRIVE PIN.
What is a Socket Wrench Set? 202 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is an Open End Box Wrench Set? 10 Items: An Open End Box Wrench Set (WRENCH SET,OPEN END BOX) is a group of WRENCH, OPEN END BOX having different characteristics.
What is a Combination Box And Open End Wrench Set? 72 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Box Wrench Set? 36 Items: A Box Wrench Set (WRENCH SET,BOX) is a group of box wrenches having different characteristics. It may include a HANDLE, EXTENSION WRENCH. See also WRENCH SET, COMBINATION, BOX AND OPEN END.
What is a Hot Line Stick? 26 Items: A Hot Line Stick is a hand tool consisting of a straight, round stick (pole) made of a suitable nonconductive material with a tool fixed to one end. The other end may be plain or have a butt mounting device fixed to it. Various types of attachments (hooks, rings, and bands) may be fixed to the body. It is designed for use in the repair and maintenance of live high voltage aerial lines. Excludes hot line sticks without heads.
Handle,Mattock-Pick 15 Items
What is a Wrench Kit? 73 Items: A Wrench Kit is an assortment of various types and sizes of wrenches such as SOCKET, SOCKET WRENCH; WRENCH, OPEN END, FIXED; WRENCH, BOX and the like. It may include adapter(s), ratchet(s) and the like. See also WRENCH SET (as modified.
What is a Brad Awl? 15 Items: A Brad Awl (AWL,BRAD) is a small, pointed tool used by shoemakers, saddlers, cabinetmakers, and the like for piercing small holes in wood, leather, and similar materials, and consists of a handle with a ferrule and a blade. The blade is round, terminating in a beveled, sharp straight edge and has a shank which passes through the center of the handle.
What is a Scratch Awl? 20 Items: A Scratch Awl (AWL,SCRATCH) is an item whose nominal length of blade is less than 4 inches (101.6 millimeters) and is provided with a nondetachable handle.
What is a Screw Extractor Set? 10 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 102 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
Jack,Scissors,Hand 26 Items
What is a Piston Ring Expander? 23 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
Mallet,Plastic 62 Items
Mallet,Rubber 10 Items
What is a Wood Mallet? 37 Items: A Wood Mallet (MALLET,WOOD) is excludes MALLET, CALKING; MALLET, HAWSING and MALLET, SERVING.
What is a Rack Bar Jack? 30 Items: A Rack Bar Jack (JACK,RACK BAR) is excludes JACK, BUMPER and JACK, REEL, HAND.
What is a Pneumatic Tire Valve Core Inserter And Remover? 14 Items: A Pneumatic Tire Valve Core Inserter And Remover (INSERTER AND REMOVER,PNEUMATIC TIRE VALVE CORE) is a bar of steel having a small cylindrical slotted end for removing or installing a valve core in a valve stem by a screwing motion. See also REPAIR TOOL, PNEUMATIC TIRE VALVE.
What is a Hand Tube Swaging Tool Kit? 20 Items: A Hand Tube Swaging Tool Kit (SWAGING TOOL KIT,TUBE,HAND) is a hand-operated noncutting tool consisting of one or more PUNCH, TUBE SWAGING, HAND and a tube flaring bar.
What is a Hand Tube Flaring Punch? 11 Items: A Hand Tube Flaring Punch (PUNCH,TUBE FLARING,HAND) is a noncutting tool having a shaped end or section designed to flare the ends of tubes. One type is designed to flare the ends of tubes against a tube sheet, and another to flare tube ends to mate with tube fittings. Includes punch components of FLARING TOOL, TUBE, HAND.
What is a Hose Strap Band Clamping Tool? 26 Items: A Hose Strap Band Clamping Tool (CLAMPING TOOL,STRAP BAND,HOSE) is an item designed to tension and lock metal straps around a rubber hose, and the like. It is also used to clamp and hold fittings therein.
What is a Mechanical Puller? 3073 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 470 Items
What is a Slip Joint Pliers? 84 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Brake Repair Pliers? 14 Items: A Brake Repair Pliers (PLIERS,BRAKE REPAIR) is a tool having jaws designed for use in brake repair operations, such as removing and replacing items such as keys, springs, and the like. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 226 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 12 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 81 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 56 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 15 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 11 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 29 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Cross Tip Screwdriver Set? 14 Items: A Cross Tip Screwdriver Set (SCREWDRIVER SET,CROSS TIP) is a group of SCREWDRIVER, CROSS TIP having different characteristics.
What is a Spanner Wrench Set? 18 Items: A Spanner Wrench Set (WRENCH SET,SPANNER) is a group of items under WRENCH, SPANNER having different characteristics.
What is a Drive Pin Punch Set? 31 Items: A Drive Pin Punch Set (PUNCH SET,DRIVE PIN) is a group of PUNCH, DRIVE PIN having different characteristics.
What is an Aligning Punch Set? 13 Items: An Aligning Punch Set (PUNCH SET,ALIGNING) is a group of PUNCH, ALIGNING having different characteristics. See also DRIFTPIN SET.
What is a Slugging Type Box Wrench Socket? 16 Items: A Slugging Type Box Wrench Socket (SOCKET,SLUGGING TYPE BOX WRENCH) is an item having a hexagonal external drive at one end, made to fit into the internal hexagonal or 12-point opening of a slugging type box wrench. The opposite end has a single-broached hexagonal opening of the same size as the external drive. The item is designed with extra thick walls to withstand the impact of sledge blows on the driving wrench.
What is a Mechanical Puller Step Plate? 44 Items: A Mechanical Puller Step Plate (STEP PLATE,MECHANICAL PULLER) is a circular disk, flanged to provide a shoulder, and designed to provide a base for the screw point of a PULLER, MECHANICAL when pulling externally mounted bearings, gears, and the like from hollow shafts or housings. It has a concentric, countersunk hole to accommodate the puller screw point.
What is a Solid Center Punch? 79 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Cable Type Ratchet Lever Puller? 20 Items: A Cable Type Ratchet Lever Puller (PULLER,RATCHET LEVER,CABLE TYPE) is an item consisting of a metal frame and ratchet lever reel to which is attached one end of a flexible cable (wire rope). The cable feeds through the fast eye in the metal frame, and may be reeved through a slip hook tackle hook. See also BINDER, LOAD; HOIST, WIRE ROPE and STRETCHER, WIRE.
What is an Electronic Equipment Tuning Wand? 18 Items: An Electronic Equipment Tuning Wand (TUNING WAND,ELECTRONIC EQUIPMENT) is a hand-held rod used in determining the adjustment of the windings of a radio frequency coil. It is made of insulating material with iron on one end and brass on the other end. By inserting the iron end in the coil, the inductance is increased and by inserting the brass end, the inductance is decreased.
What is a Combination Open End And Spanner Wrench? 14 Items: A Combination Open End And Spanner Wrench (WRENCH,OPEN END AND SPANNER,COMBINATION) is a tool having open end wrench characteristics at one end and spanner wrench features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s) at the other end.
What is a Detent Handling Tool? 187 Items: A Detent Handling Tool (HANDLING TOOL,DETENT) is a specially designed handling tool consisting of a rigid bar with a T-handle on one end. The other end is equipped with threads designed to mate the threads of a detent to facilitate inserting or extracting.
What is a Hand Material Handling Hook? 23 Items: A Hand Material Handling Hook (HOOK,MATERIAL HANDLING,HAND) is a hook whose curved end conforms to Style AP1, AP2, AP3 or AP4 of Reference Drawing Group AP. Excludes HOOK, MANHOLE COVER, HAND; HOOK, WIRE BREAKING, HAND; HOOK, ROCK CRUSHER FEEDING, HAND; HOOK, STRAINER REMOVING, HAND and HOOKS, BAG HANDLING, HAND.
What is a Magnetic Retrieving Tool? 11 Items: A Magnetic Retrieving Tool (RETRIEVING TOOL,MAGNETIC) is a hand-operated magnetic device used to locate and pick up metallic articles, such as bolts, nuts, pins, washers, and the like, in confined spaces. It may be rigid, flexible or adjustable. Excludes FINGER, MECHANICAL.
What is a Mechanical Puller Adapter? 78 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Combination Box And Open End Box Wrench? 13 Items: A Combination Box And Open End Box Wrench (WRENCH,BOX AND OPEN END BOX,COMBINATION) is a double end wrench, box and open end box, primarily designed for removing or replacing tube fittings. The opening in the open end box may be machined at an angle from the longitudinal center line of the wrench.
What is a Screw Thread Insert Inserter? 136 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Flat Tip Screwdriver Set? 48 Items: A Flat Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP) is a group of SCREWDRIVER, FLAT TIP having different characteristics.
What is a Terminal Crimping Tool Contact Positioner? 89 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 16 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is an Adjustable Wrench? 138 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 239 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 75 Items
Handle,Shovel 10 Items
What is a Socket Wrench Spanner Attachment? 88 Items: A Socket Wrench Spanner Attachment (SPANNER ATTACHMENT,SOCKET WRENCH) is an item having an adjustable or fixed span with pin, hook, or key type end that is used to fit and turn various size retaining rings, cover plates, plugs, couplings, and like parts. Usually designed to be driven by a male driver.
What is a Retaining Ring Installation Tool? 44 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Tacker? 16 Items: A Tacker is a hand-operated, hammerlike or gunlike item without a clincher, used to drive preformed connecting elements like pins, nails or staples through one object or piece of material into another. Excludes STAPLER (as modified).
What is a Bearing And Bushing Inserter? 290 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 207 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 939 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 14 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 93 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 161 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 94 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 141 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 53 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Six Point Tip Screwdriver? 155 Items: A Six Point Tip Screwdriver (SCREWDRIVER,SIX POINT TIP) is a manual screwdriver having a single nonremoveable blade having a tip with six rounded points.
What is a Seal Inserter And Remover? 147 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 478 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is a Preformed Packing Inserter And Remover? 34 Items: A Preformed Packing Inserter And Remover (INSERTER AND REMOVER,PREFORMED PACKING) is a hand tool designed to install and remove a PACKING, PREFORMED.
What is a Pin Remover? 34 Items: A Pin Remover (REMOVER,PIN) is a hand tool designed to facilitate the removal of a pin from a hole.
What is a Pin Inserter And Remover? 13 Items: A Pin Inserter And Remover (INSERTER AND REMOVER,PIN) is a rodlike tool designed to facilitate the insertion and removal of a pin from a hole.
What is an Electrical Contact Inserter And Remover? 37 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Piston Inserter? 40 Items: A Piston Inserter (INSERTER,PISTON) is a tool designed to permit installation of a piston or piston assembly without damaging the packings or piston.
What is a Spring Inserter And Remover? 85 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 13 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Stud Inserter? 22 Items: A Stud Inserter (INSERTER,STUD) is a device designed to drive in studs. It does not have any facilities for removing or extracting studs. See also INSERTER AND REMOVER, STUD.
What is a Stud Inserter And Remover? 17 Items: A Stud Inserter And Remover (INSERTER AND REMOVER,STUD) is a group of items designed to extract and to drive studs. It may include collets, guides, housings, holders and the like. See also REMOVER SET, STUD and INSERTER, STUD.
What is a Gear Inserter? 54 Items: A Gear Inserter (INSERTER,GEAR) is a hand tool designed to install various gears onto a gearshaft. It may be operated by a pushing or a striking force.
What is a Crimping Tool Die? 73 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is an Electrical Connector Inserter? 45 Items: An Electrical Connector Inserter (INSERTER,ELECTRICAL CONNECTOR) is a hand tool designed to hold an electrical connector, and to assist in the positioning and installation of the connector on a cover, panel or the like.
What is a Float? 12 Items: A Float is a tool used for concrete, plastering and grouting work.
What is a Mechanical Puller Set? 19 Items: A Mechanical Puller Set (PULLER SET,MECHANICAL) is two or more separate PULLER, MECHANICAL of different fixed sizes.
What is a Lifting Pneumatic Bag? 11 Items: A Lifting Pneumatic Bag (PNEUMATIC BAG,LIFTING) is a device made of flexible material designed to lift another item by being placed under the item and being inflated with air or some other gas. It will have a means of being connected to an air or gas source and may include a connector hose, a control valve and/or a pressure regulator.
What is a Cable Tie Installation Tool? 22 Items: A Cable Tie Installation Tool (INSTALLATION TOOL,CABLE TIE) is a lightweight, hand-held, hand-operated tool designed to fasten cable ties, straps and the like. Cable tie is inserted into the nose of the tool flush to the cable tie head. Trigger handle tightens cable tie and cuts off any excess. These installation tools are available in a variety of sizes depending on their intended use with miniature, intermediate, standard, heavy or extra heavy cross section ties.
What is a Bearing Staking Installation Tool? 159 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
Wrench Set,Ratchet 15 Items
What is a Sealant Dispenser? 26 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Retaining Ring Pliers Set? 10 Items: A Retaining Ring Pliers Set (PLIERS SET,RETAINING RING) is a group of PLIERS, RETAINING RING having different characteristics.
What is a Hand Armament Subsystem Carrier? 52 Items: A Hand Armament Subsystem Carrier (CARRIER,ARMAMENT SUBSYSTEM,HAND) is a metallic item with a clamp device and/or space for depositing articles. It is used for transporting weapon parts during maintanence and/or repair work, such as gun barrel, automatic loader, breechblock and the like.
What is a Ring Retaining Pliers Tip Set? 13 Items: A Ring Retaining Pliers Tip Set (TIP SET,PLIERS,RING RETAINING) is a collection of removable metallic tips in matched pairs used to provide various size capablities to PLIERS, RING RETAINING which permits the removal and installation of internal and external retaining rings.
What is a Plug Electrical Connector Extractor? 45 Items: A Plug Electrical Connector Extractor (EXTRACTOR,ELECTRICAL CONNECTOR,PLUG) is a hand tool designed to disassemble CONNECTOR, PLUG, ELECTRICAL from a CONNECTOR, RECEPTACLE, ELECTRICAL.
What is a Torque Wrench Adapter Set? 10 Items: A Torque Wrench Adapter Set (ADAPTER SET,TORQUE WRENCH) is tWO or more ADAPTER, TORQUE WRENCH of different sizes.
What is an Electronic Component Inserter And Remover? 79 Items: An Electronic Component Inserter And Remover (INSERTER AND REMOVER,ELECTRONIC COMPONENT) is an item which can insert or remove an electronic component package such as MICROCIRCUIT; RESISTOR, NETWORK (as modified); and the like from its mounting position or socket. Excludes INSERTER AND REMOVER, ELECTRICAL CONTACT; REMOVER, ELECTRICAL CONTACT; EXTRACTOR, ELECTRICAL CARD; EXTRACTOR, ELECTRONIC CRYSTAL UNIT; EXTRACTOR, ELECTRON TUBE.
What is an Impact Type Bit Set And Handle Screwdriver? 14 Items: An Impact Type Bit Set And Handle Screwdriver (SCREWDRIVER,BIT SET AND HANDLE,IMPACT TYPE) is an item consisting of a set of screwdriver bits and a impact driver to accommodate the bits of various types and characteristics. It is designed to transmit a strong rotating movement by the impact of a hammer blowed on the impact driver. It is used to loosen rusted or seized screws. Excludes SCREWDRIVER, BIT SET AND HANDLE.
What is a Hand Vise Jaw? 19 Items: A Hand Vise Jaw (JAW,VISE,HAND) is an item consisting of two opposing parts of a VISE, HAND. The item is moveable and able to open and close. It can hold, grasp or clamp work.
What is a Screwdriver Handle? 28 Items: A Screwdriver Handle (HANDLE,SCREWDRIVER) is an item used to accommodate various types of BIT, SCREWDRIVER. It is designed to rotate a bit that is used for installing or removing screws.
What is a Wire Twister Pliers? 25 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 284 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is a Mechanical Puller Body? 45 Items: A Mechanical Puller Body (BODY,PULLER,MECHANICAL) is an item designed to support and enclose the internal parts of a PULLER,MECHANICAL.
What is a Flat Tip And Cross Tip Screwdriver Set? 39 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is a Socket Wrench Screwdriver Attachment Set? 22 Items: A Socket Wrench Screwdriver Attachment Set (SCREWDRIVER ATTACHMENT SET,SOCKET WRENCH) is a set of screwdriver attachment, socket wrench of different sizes. Items consist of a female square drive on one end to attach to a handle, socket wrench and various screwdriver tip configurations on the opposite end. Excludes SCREWDRIVER ATTACHMENT,SOCKET WRENCH
What is an Oil Filter Wrench? 44 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 430 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Communications Equipment Spring Adjuster? 13 Items: A Communications Equipment Spring Adjuster (ADJUSTER,SPRING,COMMUNICATIONS EQUIPMENT) is a single or double end tool, equipped with slot(s) of various dimensions or with cylindrical rod(s), used for adjusting the springs or spring tensioned parts of electronic equipment.
What is a Rotating Members Aligning Tool? 32 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
What is a Final Drive Assembly Alignment Pin? 41 Items: A Final Drive Assembly Alignment Pin (ALIGNMENT PIN,FINAL DRIVE ASSEMBLY) is a special designed pin used in the assembling of the final drive.
Arm,Handling Tool 77 Items
What is a Splicing Sleeve Compressing Tool? 23 Items: A Splicing Sleeve Compressing Tool (COMPRESSING TOOL,SPLICING SLEEVE) is a hand tool having hinged leverage handles similar to a CUTTER, BOLT or pliers, designed to compress a splicing sleeve when joining the ends of two conductors, or when forming an eye splice in the end of a wire rope. Excludes CRIMPING TOOL, TERMINAL, HAND.
What is a Hand Screw Jack Extension? 14 Items: A Hand Screw Jack Extension (EXTENSION,HAND SCREW JACK) is a length of externally threaded rigid shafting which is the adjustable section of a JACK, SCREW, HAND.
What is a Mechanical Puller Gear Adapter? 21 Items: A Mechanical Puller Gear Adapter (GEAR ADAPTER,PULLER,MECHANICAL) is an adapter that adapts a PULLER,MECHANICAL, to pull a certain gear.
Handle,Hydraulic Jack 18 Items
What is a Female Electrical Contact Resizing Tool? 11 Items: A Female Electrical Contact Resizing Tool (RESIZING TOOL,FEMALE ELECTRICAL CONTACT) is a tool designed to shape to a specific size, female contacts such as those used on electrical connectors, tube sockets, crystal sockets, and pin jacks.
What is a Screwdriver And Socket Wrench Combination? 13 Items: A Screwdriver And Socket Wrench Combination is a hand-tool formed into an integral unit with a socket wrench at one end and a screwdriver bit at the other end. See also SCREWDRIVER AND WRENCH ASSEMBLY.
What is a Hand Hose Fitting Swaging Tool Kit? 11 Items: A Hand Hose Fitting Swaging Tool Kit (SWAGING TOOL KIT,HOSE FITTING,HAND) is a device, hydraulically actuated by hand or power operated pump, consisting of face plate, adapter plate, finger cages, fingers, ram, bushing, and expanding mandrels combined on a single base in various functional arrangements. It is used for swaging the outside diameter of hose assembly fittings, expanding the inside diameter of hose assemblies, and securing the fabrication of hose assemblies. Included are a hand or power operated pump, lubricant, cases, and trays.
What is a Catch Lever Tool? 12 Items: A Catch Lever Tool (LEVER TOOL,CATCH) is a specially designed hand tool which engages the opening and closing lever of a CATCH (as modified) for ease of operation. It is constructed of thin rigid material, usually flat, and one end has an engaging tongue.
What is a Manual Impact Wrench? 11 Items: A Manual Impact Wrench (WRENCH,IMPACT,MANUAL) is a manually operated handheld tool consisting of spring-loaded handle and a power-impact head which delivers a torsional impact from either continuous movement of the handle in one direction, or by a reciprocating action. It is used in tightening and loosening fasteners, such as bolts, nuts, and the like. The item may include sockets, extensions and offset fittings, nut runners, and the like.
What is a Drift? 63 Items: A Drift is an item consisting of a tubular body fitted with replaceable tips. It is designed to insert or remove mechanical components where space is restricted.
What is a Nutdriver? 46 Items: A Nutdriver is a non-powered hand tool with a screwdriver style handle, shaft and formed female hex or square socket at driving end.
What is a Locking Device Removal Tool? 12 Items: A Locking Device Removal Tool (REMOVAL TOOL,LOCKING DEVICE) is a hand tool designed to facilitate the removal of a WASHER, KEY and a LOCKING PLATE, NUT AND BOLT.
What is a Hydraulic Fitting Crimping Tool Head? 26 Items: A Hydraulic Fitting Crimping Tool Head (HEAD,CRIMPING TOOL,HYDRAULIC FITTING) is a component of a crimping tool used to compress fittings on fluid tubes. It consists of a U-shape item, in which, are mounted different sizes of DIE, CRIMPING TOOL for tubes of various diameters.
What is a Torque Screwdriver? 11 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.
What is a Special Purpose Combination Wrench? 13 Items: A Special Purpose Combination Wrench (WRENCH,COMBINATION,SPECIAL PURPOSE) is a tool having a combination of ends and facets. The ends may have open end, box or spanner characteristics. The sides may have features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s). Designed to fit specific items, not sized as standard or metric.
What is a Screwdriver Bit Holder? 56 Items: A Screwdriver Bit Holder (HOLDER,SCREWDRIVER BIT) is an attachment with a socket end for accepting male hexagon shank insert bits and a drive end for adapting to a portable power or hand tool.
What is a Telescoping Pole? 16 Items: A Telescoping Pole (POLE,TELESCOPING) is an item which is designed to be extended or compressed by the sliding of overlapping sections. This item may or may not be able to accommodate an extension.

Stock Items From Supply Class 5120 Page 51 of 110

5120-14-504-7904
Leveling-Support Jack

145047904
DAVIDDIA16HAUTEUR250MM: RNCC: 3 | RNVC: 2

4 Mar 1998

5120-14-234-3659
Extracteur

142343659
163: RNCC: 3 | RNVC: 2
0362891575: RNCC: 5 | RNVC: 2
362891575: RNCC: 5 | RNVC: 9
0362891575: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-362-4865
Tete Mob Extracteur

143624865
095076: RNCC: 3 | RNVC: 2
095076T: RNCC: 5 | RNVC: 2

19 Mar 1980

5120-14-276-2117

5120-14-217-3639
Pinces Speciales

142173639
157221: RNCC: 3 | RNVC: 2
157221: RNCC: 5 | RNVC: 2
157221: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-401-6490
Extracteurs De Gouj

5120-14-417-0136
Spanner Wrench

144170136
J05107-03S203: RNCC: 3 | RNVC: 2
J05107-03-0000S203: RNCC: 5 | RNVC: 2

25 Jun 1987

5120-14-401-5653
Seal Inserter And Remover

144015653
350A93-3707-00: RNCC: 3 | RNVC: 2

13 Jun 1985

5120-14-436-4789
Bearing And Bushing Inserter And Remover

144364789
350A93-3312-03: RNCC: 3 | RNVC: 2

3 Jan 1990

5120-14-353-2445
Open End Wrench

143532445
NO PRIMARY REF14-353-2445: RNCC: 3 | RNVC: 2
19269761: RNCC: 5 | RNVC: 9

8 Dec 1978

5120-14-377-4199
Spanner Wrench

143774199
9970-115-713: RNCC: 3 | RNVC: 2
85-691-0287: RNCC: 6 | RNVC: 9

17 May 1982

5120-14-556-6577
Socket Wrench Screwdriver Attachment

145566577
NO PRIMARY REF 14-556-6577: RNCC: 3 | RNVC: 2
282P4: RNCC: 5 | RNVC: 2

31 Mar 2008

5120-14-394-0589
Mont-Regl Jeu Outil

143940589
NO PRIMARY REF14-394-0589: RNCC: 3 | RNVC: 2
L121AAV302M: RNCC: 5 | RNVC: 9
85-692-6226: RNCC: 6 | RNVC: 9

23 Jun 1984

5120-14-212-7973
Spanner Wrench

142127973
7062RURD32-17-5-45: RNCC: 3 | RNVC: 9

1 Jan 1964

5120-14-432-3895
Outillage Mandrin

144323895
548957: RNCC: 3 | RNVC: 2
00548957: RNCC: 5 | RNVC: 2

7 Jun 1989

5120-14-438-4445
Mechanical Puller Attachment

144384445
39384004: RNCC: 3 | RNVC: 2

21 Mar 1990

5120-14-525-2687
Spanner Wrench

145252687
10460174: RNCC: 3 | RNVC: 2

23 May 2001

5120-14-489-7415
Cross Tip Screwdriver

144897415
466.10: RNCC: 3 | RNVC: 2

13 Aug 1997

5120-14-253-6247
Spanner Wrench

142536247
0242-78: RNCC: 3 | RNVC: 2
RA242: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-552-6978
Socket Head Screw Key

145526978
83S.10L: RNCC: 3 | RNVC: 2

24 Jan 2007

5120-14-437-4302
Socket Wrench Socket

144374302
16380916: RNCC: 3 | RNVC: 2
16380916: RNCC: 5 | RNVC: 9

31 Jan 1990

5120-14-524-7736
Screwdriver Bit

145247736
EH.606: RNCC: 3 | RNVC: 2
3148510233956: RNCC: 5 | RNVC: 2
1112171G00: RNCC: 5 | RNVC: 2
0023395: RNCC: 5 | RNVC: 9

11 Apr 2001

5120-14-543-2346
Socket Wrench Socket Set

145432346
RL.41E: RNCC: 3 | RNVC: 2
3148515134968: RNCC: 5 | RNVC: 2

7 Oct 2004

5120-14-457-8434
Socket Wrench Socket

144578434
M4HZ7101947620: RNCC: 3 | RNVC: 2

24 Sep 1992

5120-14-268-0064
Spanner Wrench

142680064
DE48F1: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-551-0179
Spanner Wrench

145510179
F46823: RNCC: 3 | RNVC: 2

21 Aug 2006

5120-14-329-8896
Open End Wrench

143298896
426496: RNCC: 3 | RNVC: 2
GC1014: RNCC: 5 | RNVC: 2

2 Jul 1975

5120-14-360-9428

5120-14-577-1320
Spanner Wrench

145771320
MW1305F00: RNCC: 3 | RNVC: 2

12 Aug 2013

5120-14-219-4166

5120-14-226-3726

5120-14-387-1649
Reglage Outillage

143871649
098036: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-214-3601
Cle De Blocage

142143601
77666: RNCC: 3 | RNVC: 2
823136: RNCC: 3 | RNVC: 2
823136: RNCC: 5 | RNVC: 2
823136: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-444-3208

5120-14-538-8384
Spanner Wrench

145388384
NGM0021010400264: RNCC: 2 | RNVC: 2

9 Dec 2003

5120-14-344-8766
Hand Material Handling Hook

143448766
K0PALA: RNCC: 3 | RNVC: 2

9 Sep 1977

5120-14-432-7408
Slip Joint Pliers

144327408
0141620: RNCC: 3 | RNVC: 2
MUP6165: RNCC: 3 | RNVC: 2
180A.EG: RNCC: 5 | RNVC: 2
180AEG: RNCC: 5 | RNVC: 2

21 Jun 1989

5120-14-556-9760
Woven Cable Grip

145569760
78000219: RNCC: 3 | RNVC: 2

25 Apr 2008

5120-14-225-4005

5120-14-566-4262
Socket Wrench Socket

145664262
5000262386: RNCC: 3 | RNVC: 2

15 Nov 2010

5120-14-386-6797
Lot Cle Dyna Etalon

143866797
853-100-079-0: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-245-1773
Joint Chargeur

142451773
G1-15-013: RNCC: 3 | RNVC: 2
G1-15013: RNCC: 5 | RNVC: 2
G1-15-013: RNCC: 5 | RNVC: 2
G1-15013: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-530-6047
Mechanical Puller Body

145306047
888-354-605-0: RNCC: 3 | RNVC: 2

26 Jun 2002

5120-14-321-1503
Screwdriver Bit

143211503
1002-2: RNCC: 3 | RNVC: 2
85-679-5990: RNCC: 6 | RNVC: 9

1 Jan 1975

5120-14-572-5530
Seal Inserter

145725530
261491069: RNCC: 3 | RNVC: 2

12 Jul 2012

5120-14-396-1197
Tas Pour Mandrin

143961197
219906: RNCC: 3 | RNVC: 2

27 Nov 1984

5120-14-309-6619
Outil Dextraction

143096619
CETC6B: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-567-6749
Hose Strap Band Clamping Tool

145676749
14100030: RNCC: 3 | RNVC: 2
438785: RNCC: 5 | RNVC: 2

4 Apr 2011

5120-14-325-3438

5120-14-416-7603
Mandrin Presse

144167603
537291: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-498-2414
Cle

144982414
91936411: RNCC: 3 | RNVC: 2
44431885000: RNCC: 5 | RNVC: 2
F300 0T 004 6372: RNCC: 6 | RNVC: 9

29 Oct 1997

5120-14-299-4502

5120-14-352-8865
Electrical Contact Remover

143528865
8500-1158: RNCC: 3 | RNVC: 2

14 Nov 1978

5120-14-448-8390
Electrical Contact Inserter And Remover

144488390
OUT-378: RNCC: 3 | RNVC: 2
MUP5822: RNCC: 5 | RNVC: 2

17 Jul 1991

5120-14-256-1527
Swivel Knob Jeweler's Screwdriver Set

142561527
NO PRIMARY REF14-256-1527: RNCC: 3 | RNVC: 2
7795C: RNCC: 5 | RNVC: 2
4691: RNCC: 5 | RNVC: 9

1 Jan 1969

5120-14-430-1005
Spanner Wrench

144301005
6814-58247: RNCC: 3 | RNVC: 2

1 Mar 1989

5120-14-450-3778
Ens. Frein Guide

144503778
NO PRIMARY REF14-450-3778: RNCC: 3 | RNVC: 2
BL53979: RNCC: 5 | RNVC: 9

1 Oct 1991

5120-14-465-6503
De Formage Tas

144656503
851-500-405-0: RNCC: 3 | RNVC: 2

6 Oct 1993

5120-14-372-0806
Open End Wrench

143720806
10-32X33-P: RNCC: 3 | RNVC: 2
10-32X33P: RNCC: 5 | RNVC: 2
3272670254237: RNCC: 5 | RNVC: 2
10-32X33CP: RNCC: 5 | RNVC: 9

1 Sep 1981

5120-14-413-4955
Spanner Wrench

144134955
0481-200000: RNCC: 3 | RNVC: 2

17 Dec 1986

5120-14-503-2996
Cle Bague

145032996
622397720: RNCC: 3 | RNVC: 2

9 Jan 1998

5120-14-490-8768
Cle

144908768
4065 030 001 399: RNCC: 3 | RNVC: 2
F300 0T 000 5026: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-462-9073
Spring Inserter And Remover

144629073
45056344: RNCC: 3 | RNVC: 2
45056344: RNCC: 5 | RNVC: 9

5 May 1993

5120-14-359-0465
Socket Head Screw Key

143590465
EA2: RNCC: 3 | RNVC: 2

7 Sep 1979

5120-14-394-8088
Spanner Wrench

143948088
M4ZS450D3186: RNCC: 3 | RNVC: 2

2 Oct 1984

5120-14-347-0215
Socket Wrench Adapter

143470215
D47611: RNCC: 3 | RNVC: 2

19 Jan 1978

5120-14-467-1937
Open End Wrench

144671937
415067: RNCC: 3 | RNVC: 2

21 Dec 1993

5120-14-556-9801
Woven Cable Grip

145569801
78000222: RNCC: 3 | RNVC: 2

25 Apr 2008

5120-14-402-9780
Flat Tip Screwdriver

144029780
89234985: RNCC: 3 | RNVC: 2
89234985: RNCC: 5 | RNVC: 9

25 Jul 1985

5120-14-426-8416
Spanner Wrench

144268416
0419-40030: RNCC: 3 | RNVC: 2

23 Sep 1988

5120-14-460-3159
Face Spanner Wrench Socket

144603159
45215830: RNCC: 3 | RNVC: 2
45215830: RNCC: 5 | RNVC: 9

21 Jan 1993

5120-14-310-6460

5120-14-310-7616

5120-14-501-5901
Cle

145015901
F300 0T 005 8531: RNCC: 3 | RNVC: 2
46862: RNCC: 5 | RNVC: 2
46862: RNCC: 5 | RNVC: 9

5 Nov 1997

5120-14-248-5692

5120-14-290-7525

5120-14-317-0376
Bearing And Bushing Inserter

143170376
RT4754A: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-430-4106
Broche De Guidage

144304106
905478-1AREP10: RNCC: 3 | RNVC: 2

20 Mar 1989

5120-14-415-7900
Screw Push-Pull Jack

144157900
03-08-200-128-300N: RNCC: 3 | RNVC: 9

18 May 1987

5120-14-409-5095
Special Tournevis

144095095
8811586000: RNCC: 3 | RNVC: 2

28 May 1986

5120-14-218-6737

5120-14-565-4499
Tube Fitting Wrenching Socket

145654499
885500: RNCC: 3 | RNVC: 2

19 Aug 2010

5120-14-264-5973

5120-14-556-9753
Woven Cable Grip

145569753
78000217: RNCC: 3 | RNVC: 2

25 Apr 2008

5120-14-518-0278
Six Point Tip Screwdriver

145180278
ENFD6576-27X110-6PANS: RNCC: 3 | RNVC: 2

21 Jan 2000

5120-14-363-9866
Face Spanner Wrench Socket

143639866
330A93-2043-00: RNCC: 3 | RNVC: 2

7 Aug 1980

5120-14-481-2796
Six Point Tip Screwdriver

144812796
AZX.20X100: RNCC: 3 | RNVC: 2
176-0882: RNCC: 5 | RNVC: 2
0613 255 20: RNCC: 5 | RNVC: 2
3148510134642: RNCC: 5 | RNVC: 2
1092195Y00: RNCC: 5 | RNVC: 2
0613 256 20: RNCC: 5 | RNVC: 2
0013464: RNCC: 5 | RNVC: 9
FACOMAZX.20X100: RNCC: 5 | RNVC: 9

25 Apr 1996

5120-14-505-9392
Flat Tip Screwdriver

145059392
ENFD6516-A1X5-5X150X255: RNCC: 3 | RNVC: 2
F300 0P 000 1295: RNCC: 3 | RNVC: 2

30 Mar 1998

5120-14-483-6068
Outillage D'extract

144836068
6802E31-1123-00: RNCC: 3 | RNVC: 2

24 Sep 1996

5120-14-309-7467
Bearing And Bushing Inserter

143097467
341A98-2037-20: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-441-2243
Bearing And Bushing Inserter And Remover

144412243
6802G32-2150-00: RNCC: 3 | RNVC: 2

22 Aug 1990

5120-14-564-8147
Socket Wrench

145648147
D13-13: RNCC: 3 | RNVC: 2

8 Jun 2010

5120-14-558-3630
Cross Tip Screwdriver

145583630
ANP.1X25: RNCC: 3 | RNVC: 2
0773505: RNCC: 5 | RNVC: 2
3148517735057: RNCC: 5 | RNVC: 2
OU-4001-001: RNCC: 5 | RNVC: 2

25 Sep 2008

5120-14-032-0975
Bearing And Bushing Inserter And Remover

140320975
341A98-2008-03: RNCC: 3 | RNVC: 2

5 Jul 1980

5120-14-304-4032
Spanner Wrench

143044032
TMY20-27-401: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-488-5574
Socket Head Screw Key Set

144885574
86H.JE7B: RNCC: 3 | RNVC: 2
86H.JE7B: RNCC: 5 | RNVC: 2
0126241: RNCC: 5 | RNVC: 2
3148511262412: RNCC: 5 | RNVC: 2
3148511262559: RNCC: 5 | RNVC: 2
86HJE7B: RNCC: 5 | RNVC: 2
235-3766: RNCC: 5 | RNVC: 2
0715 31 55: RNCC: 5 | RNVC: 2
FACOM86H.JE7B: RNCC: 5 | RNVC: 9

21 May 1997

5120-14-549-8846
Screwdriver Bit

145498846
EX.240L: RNCC: 3 | RNVC: 2
EX.240L: RNCC: 5 | RNVC: 2
3148510258249: RNCC: 5 | RNVC: 2
EX.240L: RNCC: 5 | RNVC: 2

17 May 2006

5120-14-277-3166
Flat Tip Screwdriver

142773166
D2: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-511-0286
Adjustable Wrench

145110286
113.12VSE: RNCC: 3 | RNVC: 2

25 Nov 1998

5120-14-442-9271
Electrical Connector Inserter

144429271
M4Z7101989702: RNCC: 3 | RNVC: 2

7 Nov 1990

5120-14-432-3743
Outillage Mandrin

144323743
537534: RNCC: 3 | RNVC: 2
00537534: RNCC: 5 | RNVC: 2

7 Jun 1989

5120-14-452-3137
Leveling-Support Jack

144523137
600159: RNCC: 3 | RNVC: 2

8 Jan 1992

5120-14-488-6841
Emmanchement Cone

144886841
257079160: RNCC: 3 | RNVC: 2

28 May 1997

5120-14-040-4691
Mandrin

140404691
23991: RNCC: 3 | RNVC: 2
23991: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-310-4212
Hand Beading Tool

143104212
PS16K: RNCC: 3 | RNVC: 9

1 Jan 1974

5120-14-388-7404
Deverrouill Crochet

143887404
8814301000: RNCC: 3 | RNVC: 2

3 Nov 1983

5120-14-221-8804

5120-14-346-7380

5120-14-240-4198

5120-14-391-6569
Cle Dynamo Ens

143916569
S204NE: RNCC: 3 | RNVC: 2

21 Mar 1984

5120-14-572-4772
Hub Holding Tool

145724772
223605366: RNCC: 3 | RNVC: 2

6 Jul 2012

5120-14-272-3751

5120-14-419-4735
Open End Wrench

144194735
F52329: RNCC: 3 | RNVC: 2

21 Oct 1987

5120-14-433-6109
Mechanical Puller Attachment

144336109
8815411002: RNCC: 3 | RNVC: 2
89411399: RNCC: 5 | RNVC: 2

2 Aug 1989

5120-14-472-5468
Socket Head Screw Key

144725468
2132E: RNCC: 3 | RNVC: 9
91758549: RNCC: 5 | RNVC: 2

28 Oct 1994

5120-14-448-9599
Socket Wrench Spanner Attachment Set

144489599
126.E80: RNCC: 3 | RNVC: 2
126E80: RNCC: 5 | RNVC: 2
3148511347287: RNCC: 5 | RNVC: 2
0134728: RNCC: 5 | RNVC: 9

24 Jul 1991

5120-14-430-9338
Socket Head Screw Key

144309338
160H722333: RNCC: 3 | RNVC: 2

29 Mar 1989

5120-14-421-3516
Spanner Wrench

144213516
540253: RNCC: 3 | RNVC: 2

14 Jan 1988

5120-14-468-9828
Seal Inserter And Remover

144689828
40N108314: RNCC: 3 | RNVC: 2

30 Mar 1994

5120-14-391-2070
Socket Wrench Socket

143912070
M85: RNCC: 3 | RNVC: 2
3148510319681: RNCC: 5 | RNVC: 2

1 Mar 1984

5120-14-441-2305
Bearing And Bushing Inserter And Remover

144412305
6804V32-2428-00: RNCC: 3 | RNVC: 2

22 Aug 1990

5120-14-420-3192
Craftsman's Tweezers

144203192
2ASA: RNCC: 3 | RNVC: 2
C5DV00801040: RNCC: 3 | RNVC: 2
C5DV00801040: RNCC: 5 | RNVC: 2
176-1150: RNCC: 5 | RNVC: 2
2ASA: RNCC: 5 | RNVC: 2

30 Nov 1987

5120-14-426-5809
Spanner Wrench

144265809
NO PRIMARY REF14-426-5809: RNCC: 3 | RNVC: 2
E0951637: RNCC: 5 | RNVC: 9

8 Sep 1988

5120-14-384-7525
Electrical Card Extractor

143847525
NO PRIMARY REF14-384-7525: RNCC: 3 | RNVC: 2
16931883: RNCC: 5 | RNVC: 9

2 Jun 1983

5120-14-431-4849
Socket Head Screw Key

144314849
0372-42-10091: RNCC: 3 | RNVC: 2

19 Apr 1989

5120-14-219-4168
Cle Accumulateur Hy

142194168
PR46029: RNCC: 3 | RNVC: 2
PR46138: RNCC: 5 | RNVC: 2

1 Jan 1965

5120-14-417-8346
Bearing And Bushing Inserter And Remover

144178346
523008: RNCC: 3 | RNVC: 2

29 Jul 1987

5120-14-489-4328
Spanner Wrench

144894328
26-529: RNCC: 3 | RNVC: 2

23 Jul 1997

5120-14-490-8723
Broche

144908723
4065 020 000 593: RNCC: 3 | RNVC: 2
F300 0T 000 4963: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-433-3252
Outillage Mandrin

144333252
537157: RNCC: 3 | RNVC: 2
00537157: RNCC: 5 | RNVC: 2

19 Jul 1989

5120-14-566-7000
Screw Thread Insert Tang Breakoff Tool

145667000
0512: RNCC: 3 | RNVC: 2
71810120001: RNCC: 5 | RNVC: 2

8 Dec 2010

5120-14-262-4482

5120-14-261-0139

5120-14-404-5618
Freins Reglage Cle

144045618
7701405257: RNCC: 3 | RNVC: 2

20 Nov 1985

5120-14-563-8304
Seal Remover

145638304
09308-10010: RNCC: 3 | RNVC: 2

19 Mar 2010

5120-14-268-0290
Coupelle De Piston

142680290
372006: RNCC: 3 | RNVC: 2
DBA372006: RNCC: 5 | RNVC: 9

1 Jan 1970

5120-14-430-3471
Broche Filetee

144303471
RT19724: RNCC: 3 | RNVC: 2

15 Mar 1989

5120-14-235-8662

5120-14-480-8272
Face Spanner Wrench Socket

144808272
20859579: RNCC: 3 | RNVC: 2
20859579: RNCC: 5 | RNVC: 9

4 Apr 1996

5120-14-363-8618
Socket Wrench Socket

143638618
T210: RNCC: 3 | RNVC: 2
0000047100: RNCC: 5 | RNVC: 2
M0T471: RNCC: 5 | RNVC: 2

7 Aug 1980

5120-14-284-7425

5120-14-502-6691
Final Drive Assembly Alignment Pin

145026691
NO PRIMARY REF14-502-6691: RNCC: 3 | RNVC: 2
274037: RNCC: 5 | RNVC: 9

17 Dec 1997

5120-14-349-3841
Socket Wrench Socket

143493841
9970-115-628: RNCC: 3 | RNVC: 2

22 May 1978

5120-14-424-8055
Open End Wrench

144248055
522C36X38: RNCC: 3 | RNVC: 9
522-36X38: RNCC: 5 | RNVC: 9
DEM522C36X38: RNCC: 5 | RNVC: 9

9 Jun 1988

5120-14-578-5208
Seal Inserter

145785208
OU300281: RNCC: 3 | RNVC: 2

9 Dec 2013

5120-14-424-5270
Spanner Wrench

144245270
7M486: RNCC: 3 | RNVC: 2

26 May 1988

5120-14-286-7815
Screw Thread Insert Inserter

142867815
01500518500: RNCC: 3 | RNVC: 2
32071850: RNCC: 5 | RNVC: 2
32081850: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-304-3772

5120-14-301-1457
Spanner Wrench

143011457
8810600155: RNCC: 3 | RNVC: 2
7M123R: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-201-0109

5120-14-541-6505
Socket Wrench Socket

145416505
0099189: RNCC: 3 | RNVC: 2

17 Jun 2004

5120-14-577-2211
Screwdriver Bit Set

145772211
ED1.J3: RNCC: 3 | RNVC: 2
3148518209816: RNCC: 5 | RNVC: 2
820981: RNCC: 5 | RNVC: 2

23 Aug 2013

5120-14-271-8357
Spanner Wrench

142718357
PA166-1M933-1P25: RNCC: 3 | RNVC: 9
E74323A70BEW: RNCC: 4 | RNVC: 1

1 Jan 1970

5120-14-519-0721
Hand Hydraulic Jack Kit

145190721
26145907056: RNCC: 3 | RNVC: 2
870647-02+207895-06+493456-00: RNCC: 5 | RNVC: 2
SYQ4881: RNCC: 5 | RNVC: 2

7 Mar 2000

5120-14-452-2250
Clavette Cle Inferi

144522250
6252-101/Q29-R29/REP27: RNCC: 3 | RNVC: 2

7 Jan 1992

5120-14-214-2839
Cle Speciale Pour E

142142839
9970-115-240: RNCC: 3 | RNVC: 2
9970-115-240-01: RNCC: 5 | RNVC: 2

1 Jan 1965

5120-14-431-2679
Outil Mont Clapet

144312679
3160S95-13-040: RNCC: 3 | RNVC: 2

12 Apr 1989

5120-14-578-7334
Box Wrench

145787334
105-3/8X7/16: RNCC: 3 | RNVC: 2

6 Jan 2014

5120-14-443-9416
Socket Head Screw Key

144439416
GS23 3/16: RNCC: 3 | RNVC: 2
GS100-02: RNCC: 5 | RNVC: 2

13 Dec 1990

5120-14-295-2903
Spanner Wrench

142952903
0399-07: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-510-7410
Socket Head Screw Key Set

145107410
89.JL8: RNCC: 3 | RNVC: 2
3148515329609: RNCC: 5 | RNVC: 2

10 Nov 1998

5120-14-277-3072
Cle Pour Buse Prech

142773072
13599590N: RNCC: 3 | RNVC: 2
59959: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-280-3943

5120-14-436-0218
Preformed Packing Inserter

144360218
806994: RNCC: 3 | RNVC: 2

29 Nov 1989

5120-14-355-2873
Torque Wrench Adapter

143552873
EM0: RNCC: 3 | RNVC: 2

19 Mar 1979

5120-14-453-7016
Preformed Packing Inserter And Remover

144537016
00107377ER2: RNCC: 3 | RNVC: 2

5 Mar 1992

5120-14-559-4324
Face Spanner Wrench Socket

145594324
CLU01-194: RNCC: 3 | RNVC: 2

13 Jan 2009

5120-14-348-8386
Faux Mors

143488386
D47732: RNCC: 3 | RNVC: 2

19 Apr 1978

5120-14-246-7876
Vise Jaw Caps

142467876
NO PRIMARY REF14-246-7876: RNCC: 3 | RNVC: 2
1285-100: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-513-1248
Screwdriver Bit

145131248
FD6515-C0-5X3: RNCC: 3 | RNVC: 2
0614 175 703: RNCC: 5 | RNVC: 2
FD6515C0-5X3: RNCC: 5 | RNVC: 2

5 Mar 1999

5120-14-376-7754
Combination Box And Open End Wrench

143767754
NO PRIMARY REF14-376-7754: RNCC: 3 | RNVC: 2
225221: RNCC: 5 | RNVC: 9

28 Apr 1982

5120-14-576-3059
Inserter And Remove

145763059
8811527001: RNCC: 3 | RNVC: 2

11 Jun 2013

5120-14-437-0862
De Fixation Plaque

144370862
1101698: RNCC: 3 | RNVC: 9

17 Jan 1990

5120-14-247-1239
Extracteur

142471239
4609: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-299-6423
Douille Sertissage

142996423
FF6X08A: RNCC: 3 | RNVC: 2
0T1588: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-427-1183
Face Spanner Wrench Socket

144271183
540240: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-323-4474
Guide De Centrage

143234474
0S21129: RNCC: 3 | RNVC: 2
0MDS21129: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-539-8793
Combination Box And Open End Wrench

145398793
37.15: RNCC: 3 | RNVC: 9
3148510987767: RNCC: 5 | RNVC: 9

17 Feb 2004

5120-14-244-4016

5120-14-272-5737

5120-14-374-6767

5120-14-460-5579
Face Spanner Wrench Socket

144605579
239605Q: RNCC: 3 | RNVC: 2

29 Jan 1993

5120-14-451-1156
Bearing And Bushing Inserter And Remover

144511156
45057861: RNCC: 3 | RNVC: 2
45057861: RNCC: 5 | RNVC: 9

30 Oct 1991

5120-14-384-7618
Electrical Card Extractor

143847618
20198027: RNCC: 3 | RNVC: 2
20198027: RNCC: 5 | RNVC: 9

2 Jun 1983

5120-14-418-5838
Pliers

144185838
7311: RNCC: 3 | RNVC: 2

2 Sep 1987

5120-14-311-5544
Outil Extract Conta

143115544
M15571: RNCC: 3 | RNVC: 2
15571: RNCC: 5 | RNVC: 2

1 Jan 1974

5120-14-272-3739
Open End Wrench

142723739
E74302R29-31BAW: RNCC: 2 | RNVC: 1

1 Jan 1971

5120-14-255-9978
Cle Pour Ecrous De

142559978
NO PRIMARY REF14-255-9978: RNCC: 3 | RNVC: 2
145J12: RNCC: 5 | RNVC: 9

1 Jan 1969

5120-14-319-5799
Socket Head Screw Key

143195799
213-23-265-051: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-561-2509
Combination Box And Open End Wrench

145612509
51A-19: RNCC: 3 | RNVC: 2

30 Jun 2009

5120-14-226-3137
Tournevis Special

142263137
60290-01-43-030M1: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-233-0711
Verin A Vis

142330711
6725-21: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-274-8642
Corps Extenseur

142748642
R31674-7-18REP1BIS: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-282-8787
Spanner Wrench

142828787
0349-78: RNCC: 3 | RNVC: 2
RA349: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-234-4281
Rodoir Clapet Soupa

142344281
17899TREP5: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-553-2759
Out Virole Chargeur

145532759
037656: RNCC: 3 | RNVC: 2
37656: RNCC: 5 | RNVC: 2

20 Mar 2007

5120-14-258-2263

5120-14-202-5999

5120-14-233-4357

5120-14-566-8217
Spanner Wrench

145668217
101.141: RNCC: 3 | RNVC: 2

23 Dec 2010

5120-14-230-1077

5120-14-334-8063

5120-14-497-8703
Cable

144978703
F300 0T 022 9438: RNCC: 3 | RNVC: 2
45525638: RNCC: 5 | RNVC: 2

22 Oct 1997

5120-14-421-6312
Socket Wrench Crowfoot Attachment

144216312
210494: RNCC: 3 | RNVC: 2

20 Jan 1988

5120-14-031-9132
Socket Wrench Attachment Universal Joint

140319132
NS240: RNCC: 3 | RNVC: 2
3148510434001: RNCC: 5 | RNVC: 2

5 Jul 1980

5120-14-548-6879
Socket Wrench Socket

145486879
SJ.12H: RNCC: 3 | RNVC: 2

1 Feb 2006

5120-14-578-2064
Inserter And Remove

145782064
TM0373G001: RNCC: 3 | RNVC: 2

12 Nov 2013

5120-14-558-1657
Socket Wrench Socket

145581657
14100037535: RNCC: 3 | RNVC: 2

9 Sep 2008

5120-14-291-8209

5120-14-559-3239
Torque Wrench Adapter

145593239
MTR01-60: RNCC: 3 | RNVC: 2

18 Dec 2008

5120-14-387-1915
Mise En Place Outil

143871915
MHN233-43: RNCC: 3 | RNVC: 2
MHN233-43: RNCC: 5 | RNVC: 2

24 Aug 1983

5120-14-404-8657
Outil D'installatio

144048657
1274: RNCC: 3 | RNVC: 2

20 Nov 1985

5120-14-212-0497

5120-14-314-4210

5120-14-348-0811
Extracteur De Touch

143480811
154001FB: RNCC: 3 | RNVC: 9
154001: RNCC: 5 | RNVC: 9

29 Mar 1978

5120-14-208-6296

5120-14-216-4097

5120-14-469-0448
Open End Wrench

144690448
69-8: RNCC: 3 | RNVC: 2
69.8: RNCC: 3 | RNVC: 2
3272670233621: RNCC: 5 | RNVC: 2

5 Apr 1994

5120-14-237-0585
Pince A Sertir Cabl

142370585
8137: RNCC: 3 | RNVC: 2
8137: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-527-0813
Spanner Wrench

145270813
378-11564: RNCC: 3 | RNVC: 2
378-11564: RNCC: 3 | RNVC: 2

1 Oct 2001

5120-14-343-6357
Canon De Guidage

143436357
330A97-2404-50: RNCC: 3 | RNVC: 2

16 Jun 1977

5120-14-220-8202
Open End Wrench

142208202
BB101-54X58: RNCC: 3 | RNVC: 9

1 Jan 1965

5120-14-433-5477
Electrical Contact Remover

144335477
M15515-20A: RNCC: 3 | RNVC: 2

2 Aug 1989

5120-14-352-3170
Montage Piston Obus

143523170
MGF288-41: RNCC: 3 | RNVC: 2
MGF288-25: RNCC: 5 | RNVC: 2
MGF288-41: RNCC: 5 | RNVC: 2

16 Oct 1978

5120-14-323-1413

5120-14-292-0399
Douille Dalignement

142920399
NO PRIMARY REF14-292-0399: RNCC: 3 | RNVC: 2
157459: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-480-8108
Spanner Wrench

144808108
A02810-00S700: RNCC: 3 | RNVC: 2
387727-001: RNCC: 5 | RNVC: 2

4 Apr 1996

5120-14-308-5692
Pliers

143085692
E73-141BECSC0URTS140: RNCC: 2 | RNVC: 2

1 Jan 1974

5120-14-541-1710
Pliers

145411710
188.20TE: RNCC: 3 | RNVC: 2
188-20TE: RNCC: 5 | RNVC: 2

14 May 2004

5120-14-522-7964
Spanner Wrench

145227964
29480585: RNCC: 3 | RNVC: 2

24 Nov 2000

5120-14-354-1222
Electrical Card Extractor

143541222
16211601: RNCC: 3 | RNVC: 2
16211601: RNCC: 5 | RNVC: 2
16211601: RNCC: 5 | RNVC: 9

16 Jan 1979

5120-14-470-7622
Terminal Crimping Tool Contact Positioner

144707622
M4HZ7101966101: RNCC: 3 | RNVC: 2

6 Jul 1994

5120-14-333-7367

5120-14-371-9164
Screw Thread Insert Inserter

143719164
01500214460: RNCC: 3 | RNVC: 2

5 Aug 1981

5120-14-451-7797
Seal Inserter And Remover

144517797
600091: RNCC: 3 | RNVC: 2

4 Dec 1991

5120-14-285-7721
Open End Wrench

142857721
RT11211: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-299-6414
Douille Sertissage

142996414
FF10X1D: RNCC: 3 | RNVC: 2
0T1626: RNCC: 5 | RNVC: 2
FF10X10: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-571-2261
Crimping Tool Die

145712261
985920: RNCC: 3 | RNVC: 2
FACOM 985920: RNCC: 5 | RNVC: 2

1 Mar 2012

5120-14-316-6636

5120-14-385-8418

5120-14-375-1760
Mandrin Demmancheme

143751760
16380151: RNCC: 3 | RNVC: 2
16380151: RNCC: 5 | RNVC: 9

26 Feb 1982

5120-14-570-2596
Seal Inserter

145702596
UFA31556: RNCC: 3 | RNVC: 2

5 Dec 2011

5120-14-288-2869

5120-14-281-2980
Faux Mors Tige Veri

142812980
C46924: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-272-3579

5120-14-489-3933
Mastic Pistolet

144893933
TMY20-57-003: RNCC: 3 | RNVC: 2

16 Jul 1997

5120-14-219-1373

5120-14-266-4868
Cliquet

142664868
M150: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-393-8847

5120-14-313-7275
Faux Mors

143137275
C47018: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-228-5205

5120-14-228-5121

5120-14-570-7646
Impact Type Bit Set And Handle Screwdriver

145707646
270A-J20M: RNCC: 3 | RNVC: 2

23 Jan 2012

5120-14-416-7558
Blocage Outil

144167558
537401: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-380-8362
Broche Filetee

143808362
C46122: RNCC: 3 | RNVC: 2

14 Dec 1982

5120-14-497-3084
Cle Speciale

144973084
EPPK46: RNCC: 3 | RNVC: 2
EPPK46: RNCC: 5 | RNVC: 9
F300 0T 022 9909: RNCC: 6 | RNVC: 9

15 Oct 1997

5120-14-259-2648

5120-14-222-1061

5120-14-393-4930
Deglaceuse

143934930
99250901401: RNCC: 3 | RNVC: 2
99-250-90-14-01: RNCC: 5 | RNVC: 2

7 Apr 1984

5120-14-361-4912
Preformed Packing Inserter And Remover

143614912
8811408000: RNCC: 3 | RNVC: 2
85-689-7522: RNCC: 6 | RNVC: 9

24 Jan 1980

5120-14-521-7611
Spanner Wrench

145217611
2P84735-00: RNCC: 3 | RNVC: 2

13 Sep 2000

5120-14-316-6630
Open End Wrench

143166630
AK102: RNCC: 3 | RNVC: 2
AK102: RNCC: 5 | RNVC: 1
85-101-2412: RNCC: 6 | RNVC: 9

1 Jan 1975

5120-14-339-0379
Spanner Wrench

143390379
80900-280: RNCC: 3 | RNVC: 2
78576-167: RNCC: 5 | RNVC: 2
85-598-4691: RNCC: 6 | RNVC: 9

17 Dec 1976

5120-14-212-2502
Manche De Gaffe

142122502
NO PRIMARY REF14-212-2502: RNCC: 3 | RNVC: 2
10420: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-215-1335
Jet Montage De Bouc

142151335
3130S95-12-002: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-532-1114
Socket Wrench Adapter

145321114
N673301GC130: RNCC: 3 | RNVC: 2

9 Oct 2002

5120-14-541-8979
Socket Wrench Adapter

145418979
61394999AC: RNCC: 3 | RNVC: 2
61394999AA: RNCC: 5 | RNVC: 2

2 Jul 2004

5120-14-250-0126
Open End Wrench

142500126
E74302S11X13AKB: RNCC: 2 | RNVC: 2
44S11X13: RNCC: 3 | RNVC: 2
10NC11X13: RNCC: 3 | RNVC: 2
0392110913: RNCC: 5 | RNVC: 2
13L11X13: RNCC: 5 | RNVC: 9
0392110913: RNCC: 5 | RNVC: 9
392110913: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-526-0458
Socket Wrench Spanner Attachment

145260458
10635151: RNCC: 3 | RNVC: 2

28 Jun 2001

5120-14-426-8381
Spanner Wrench

144268381
0408-52038: RNCC: 3 | RNVC: 2

23 Sep 1988

5120-14-238-0314
Open End Wrench

142380314
BB94: RNCC: 3 | RNVC: 9

1 Jan 1967

5120-14-235-6195

5120-14-463-7682
Manchon

144637682
428402T: RNCC: 3 | RNVC: 2
M19836: RNCC: 5 | RNVC: 2

29 Jun 1993

5120-14-419-9312
Bague Etan Simbleau

144199312
10583: RNCC: 3 | RNVC: 2
10583: RNCC: 5 | RNVC: 9

10 Nov 1987

5120-14-416-7525
Mandrin Presse

144167525
537293: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-498-7148
Cle

144987148
704610: RNCC: 3 | RNVC: 2
704610: RNCC: 5 | RNVC: 9
F300 0T 008 2042: RNCC: 6 | RNVC: 9

29 Oct 1997

5120-14-419-9373
Fourchette Guidage

144199373
530574: RNCC: 3 | RNVC: 2

10 Nov 1987

5120-14-282-4895

5120-14-282-9205

5120-14-491-0232
Plateau

144910232
4602 012 400 005: RNCC: 3 | RNVC: 2
F300 0T 001 1029: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-238-5473

5120-14-452-5236
Extracteur

144525236
D46416: RNCC: 3 | RNVC: 2

8 Jan 1992

5120-14-365-1633

5120-14-285-6283

5120-14-569-8630
Socket Wrench Socket Set

145698630
REL.40U: RNCC: 3 | RNVC: 2
3148517840614: RNCC: 5 | RNVC: 2
784061: RNCC: 5 | RNVC: 2

25 Oct 2011

5120-14-314-4253
Manchon Pare Eclats

143144253
64927: RNCC: 3 | RNVC: 2
07307: RNCC: 5 | RNVC: 2

1 Jan 1974

5120-14-516-8068
Centreur

145168068
5001008867: RNCC: 3 | RNVC: 2

18 Oct 1999

5120-14-574-3338
Drill Guide

145743338
B009920: RNCC: 3 | RNVC: 2

9 Jan 2013

5120-14-572-1719
Seal Remover

145721719
735492: RNCC: 3 | RNVC: 2

12 Jun 2012

5120-14-571-7364
Screwdriver Bit

145717364
E-111-H4: RNCC: 3 | RNVC: 2

26 Apr 2012

5120-14-409-1475
Outil Posit Coussin

144091475
26545905400: RNCC: 3 | RNVC: 2
ASSY145.007: RNCC: 5 | RNVC: 9
265459054: RNCC: 5 | RNVC: 9

16 Apr 1986

5120-14-572-8445
Socket Wrench Socket

145728445
320010: RNCC: 3 | RNVC: 2
7612206014748: RNCC: 5 | RNVC: 2

13 Aug 2012

5120-14-270-9308

5120-14-295-2042

5120-14-285-4468

5120-14-393-4144
Socket Head Screw Key

143934144
89.27: RNCC: 3 | RNVC: 2
66-27: RNCC: 3 | RNVC: 2
66.27: RNCC: 3 | RNVC: 2
3148511268049: RNCC: 5 | RNVC: 2
89-27: RNCC: 5 | RNVC: 2
3272670295025: RNCC: 5 | RNVC: 2
235-4949: RNCC: 5 | RNVC: 2
TX 89.27: RNCC: 5 | RNVC: 9
0126804: RNCC: 5 | RNVC: 9
FACOM89.27: RNCC: 5 | RNVC: 9

7 Apr 1984

5120-14-251-9445
Open End Wrench

142519445
PA166-1M933-1P18: RNCC: 3 | RNVC: 9

1 Jan 1968

5120-14-463-1431
Bague De Maintien

144631431
50406: RNCC: 3 | RNVC: 2
OU50406: RNCC: 5 | RNVC: 2
85-695-0315: RNCC: 6 | RNVC: 9

26 May 1993

5120-14-314-2337
Socket Wrench Crowfoot Attachment

143142337
160-71960-32: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-265-9713
Matoir Pour Rubans

142659713
VTR200-1090: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-496-0051
Cle

144960051
74-B5: RNCC: 3 | RNVC: 2
F300 0T 020 7503: RNCC: 6 | RNVC: 9

15 Oct 1997

5120-14-497-5562
Cle

144975562
IF1164025: RNCC: 3 | RNVC: 9
F300 0T 023 3551: RNCC: 6 | RNVC: 9

15 Oct 1997

5120-14-514-6781
Outil Multifonction

145146781
196019-1AT: RNCC: 3 | RNVC: 2

9 Jun 1999

5120-14-232-9182
Outil Pour Emmanche

142329182
44321: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-227-3155

5120-14-208-6448

5120-14-266-6987

5120-14-478-1966
Fixed Open End Wrench Set

144781966
87HL.JE8: RNCC: 3 | RNVC: 2
3148511264317: RNCC: 5 | RNVC: 2
1034756W00: RNCC: 5 | RNVC: 2
0126431: RNCC: 5 | RNVC: 9

16 Oct 1995

5120-14-457-5514
Equilibrage Transfo

144575514
12095: RNCC: 3 | RNVC: 2

10 Sep 1992

5120-14-237-5705

5120-14-373-4543
Emmanche Piston

143734543
DLP751800: RNCC: 3 | RNVC: 2

21 Oct 1981

5120-14-234-3309

5120-14-248-7492

5120-14-561-8169
Rope Coiling Device

145618169
219746-0: RNCC: 3 | RNVC: 2

9 Sep 2009

5120-14-506-7754
De Formage Outil

145067754
M10520: RNCC: 3 | RNVC: 2

15 May 1998

5120-14-283-2488

5120-14-431-2691
Bearing And Bushing Inserter

144312691
3160S95-68-130: RNCC: 3 | RNVC: 2

12 Apr 1989

5120-14-430-1014
Cloche Pince

144301014
6814-58554: RNCC: 3 | RNVC: 2

1 Mar 1989

5120-14-315-2744
Spanner Wrench

143152744
3511-961-26361: RNCC: 3 | RNVC: 2
3511 961 26361: RNCC: 5 | RNVC: 2
MQ12636: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-410-9078
Socket Wrench Spanner Attachment

144109078
4843-1P: RNCC: 3 | RNVC: 9

23 Jul 1986

5120-14-386-6031
Hand Material Handling Hook

143866031
9970-146-682: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-540-1706
Rotating Members Aligning Tool

145401706
56963382: RNCC: 3 | RNVC: 2

11 Mar 2004

5120-14-450-1922
Socket Wrench Socket

144501922
29412431: RNCC: 3 | RNVC: 2

25 Sep 1991

5120-14-355-1917
Spanner Wrench

143551917
VDP7532: RNCC: 3 | RNVC: 2

19 Mar 1979

5120-14-537-3229
Open End Wrench

145373229
TN22877 K6111 0026: RNCC: 3 | RNVC: 2

20 Oct 2003

5120-14-476-3691
Socket Head Screw Key

144763691
OU50345: RNCC: 3 | RNVC: 2
OU50345: RNCC: 5 | RNVC: 9

7 Jun 1995

5120-14-323-8973

5120-14-353-2453

5120-14-564-5162
Mattock-Pick Handle

145645162
A251400100006: RNCC: 3 | RNVC: 2
34H9050: RNCC: 5 | RNVC: 2

4 May 2010

5120-14-228-5598

5120-14-224-9894

5120-14-216-1306

5120-14-318-6219
Spanner Wrench

143186219
C46328: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-419-6710
Bearing And Bushing Inserter

144196710
74545900200: RNCC: 3 | RNVC: 2
609537: RNCC: 5 | RNVC: 9
745459002: RNCC: 5 | RNVC: 9

30 Oct 1987

5120-14-577-0689
Mechanical Puller

145770689
F27912000: RNCC: 3 | RNVC: 2

2 Aug 2013

5120-14-558-4362
Ratchet Driven Jack

145584362
DELT9015B: RNCC: 3 | RNVC: 2

2 Oct 2008

5120-14-553-2089
Socket Wrench Socket Set

145532089
S.427 EP: RNCC: 3 | RNVC: 2
3148515163555: RNCC: 5 | RNVC: 2

14 Mar 2007

5120-14-325-6111
Embout Pour Cle

143256111
465090: RNCC: 3 | RNVC: 2
465090: RNCC: 5 | RNVC: 2

2 Jul 1975

5120-14-281-2971
Faux Mors Tige Cent

142812971
C46859: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-419-9412
Mandrin De Retouche

144199412
536983: RNCC: 3 | RNVC: 2

10 Nov 1987

5120-14-368-9289
Extracteur Ens Opti

143689289
MUP5353: RNCC: 3 | RNVC: 2

10 Mar 1981

5120-14-221-8809

5120-14-275-1614

5120-14-325-3290

5120-14-490-6952
Hammer

144906952
241 H 00520 025: RNCC: 3 | RNVC: 2
F300 0T 000 1088: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-339-8425
Bague Dextracteur

143398425
DLT055693: RNCC: 3 | RNVC: 2

18 Jan 1977

5120-14-223-4993

5120-14-296-8117

5120-14-234-3366

5120-14-324-4923
Faux Mors

143244923
C47528: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-233-6935

5120-14-544-9302
Flat Tip Screwdriver

145449302
624000: RNCC: 3 | RNVC: 2

7 Mar 2005

5120-14-212-0837
Open End Wrench

142120837
01M006: RNCC: 3 | RNVC: 2
01M017: RNCC: 5 | RNVC: 2
EF23MIR3: RNCC: 5 | RNVC: 2

5 Jul 1980

5120-14-292-7394
Screwdriver Bit Holder

142927394
R295: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-272-3577

5120-14-286-0380
Rupteur

142860380
35050511: RNCC: 3 | RNVC: 2
35050521: RNCC: 5 | RNVC: 2
35050522: RNCC: 5 | RNVC: 2
35050523: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-576-6228
Inserter And Remove

145766228
8811132003: RNCC: 3 | RNVC: 2

1 Jul 2013

5120-14-555-2799
Hand Terminal Crimping Tool

145552799
985894: RNCC: 3 | RNVC: 2

22 Oct 2007

5120-14-223-8369

5120-14-493-9761
Cle

144939761
NO PRIMARY REF14-493-9761: RNCC: 3 | RNVC: 2
3904804: RNCC: 5 | RNVC: 9
F300 0T 014 8967: RNCC: 6 | RNVC: 9

15 Oct 1997

5120-14-395-4098
Cle Speciale

143954098
7602-0831: RNCC: 3 | RNVC: 2

11 Oct 1984

5120-14-225-3995

5120-14-372-0164

5120-14-302-5069

5120-14-313-4686
Raccord Daccoupleme

143134686
WA.1126: RNCC: 3 | RNVC: 2
3148510790008: RNCC: 5 | RNVC: 2
WA1126: RNCC: 5 | RNVC: 2
0079000: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-248-3518

5120-14-265-9583

5120-14-447-0402
Ela Garniture Pince

144470402
132161: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-14-416-7549
Maintien Outil

144167549
537392: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-227-7220
Collier De Demontag

142277220
959076: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-492-2733
Tournevis

144922733
0023278518: RNCC: 3 | RNVC: 2
F300 0T 007 2789: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-278-5953

5120-14-444-9189
Bouteille Outillage

144449189
1011771C00: RNCC: 3 | RNVC: 2

28 Jan 1991

5120-14-337-5217

5120-14-224-3078
Cle Speciale Demont

142243078
X3228R: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-302-6528

5120-14-359-8119
Extracteur Poussoir

143598119
0-704459-2: RNCC: 3 | RNVC: 2

15 Oct 1979

5120-14-440-2918
Mechanical Puller Attachment

144402918
SV1310: RNCC: 3 | RNVC: 2
5000261310: RNCC: 5 | RNVC: 2
89409867: RNCC: 5 | RNVC: 2
SV1310: RNCC: 5 | RNVC: 9

11 Jul 1990

5120-14-527-5915
Maintien Cle

145275915
46AM121A: RNCC: 3 | RNVC: 2

30 Oct 2001

5120-14-560-4787
Bearing Staking Installation Tool

145604787
E7351: RNCC: 3 | RNVC: 2

23 Apr 2009

5120-14-421-0337
Queue D'arronde Mal

144210337
800537907: RNCC: 3 | RNVC: 2

6 Jan 1988

5120-14-514-0090
Open End Wrench

145140090
ENFD29159-13X14: RNCC: 3 | RNVC: 2

22 Apr 1999

5120-14-389-1966
Mechanical Puller Attachment

143891966
321A97-3256-00: RNCC: 3 | RNVC: 2
85-800-9764: RNCC: 6 | RNVC: 9

29 Nov 1983

5120-14-387-2632
Spanner Wrench

143872632
8812242000: RNCC: 3 | RNVC: 2
8816082000: RNCC: 5 | RNVC: 2
85-693-9151: RNCC: 6 | RNVC: 9

15 Sep 1983

5120-14-451-1223
Hand Blind Riveter

144511223
60-103-010: RNCC: 3 | RNVC: 2
RB42: RNCC: 5 | RNVC: 2
85-694-6776: RNCC: 6 | RNVC: 9

30 Oct 1991

5120-14-422-2385
Socket Head Screw Key

144222385
0372-42-10081: RNCC: 3 | RNVC: 2

24 Feb 1988

5120-14-271-0051

5120-14-398-1465
Controle Montage

143981465
F47587: RNCC: 3 | RNVC: 2

31 Jan 1985

5120-14-220-7894
Open End Wrench

142207894
RACD58: RNCC: 3 | RNVC: 2
RACD58: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-440-6385
Vise Jaw Caps

144406385
125PB: RNCC: 3 | RNVC: 2
99017522: RNCC: 5 | RNVC: 2
DOL125PB: RNCC: 5 | RNVC: 9

18 Jul 1990

5120-14-551-6863
Stuffing Box And Pump Packing Extractor

145516863
85.400.208: RNCC: 3 | RNVC: 2

16 Oct 2006

5120-14-538-4413
Hand Molder's Rammer

145384413
NGM0010037264123: RNCC: 2 | RNVC: 2

9 Dec 2003

5120-14-513-3797
Flat Tip Screwdriver

145133797
AZB.4X40: RNCC: 3 | RNVC: 2
13401: RNCC: 5 | RNVC: 2
1069898L00: RNCC: 5 | RNVC: 2

17 Mar 1999

5120-14-220-8560
Adaptateur Special

142208560
PR46672: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-333-8766
Rempliss Adaptateur

143338766
MS1411: RNCC: 3 | RNVC: 2

23 Apr 1976

5120-14-223-5345
Cle Pour Vis Accoup

142235345
044BBC4BBF4AREP1: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-530-5335
Socket Wrench Handle

145305335
SJ.120: RNCC: 3 | RNVC: 2

18 Jun 2002

5120-14-425-6805
Spanner Wrench

144256805
8811809000: RNCC: 3 | RNVC: 2

21 Jul 1988

5120-14-441-2007
Terminal Crimping Tool Contact Positioner

144412007
R073040006: RNCC: 3 | RNVC: 2
91711066: RNCC: 5 | RNVC: 2
73040006: RNCC: 5 | RNVC: 9

22 Aug 1990

5120-14-438-4449
Mechanical Puller Attachment

144384449
39387387: RNCC: 3 | RNVC: 2

21 Mar 1990

5120-14-249-3292
Flasque Droit Dextr

142493292
12202157: RNCC: 3 | RNVC: 2
12202157: RNCC: 3 | RNVC: 9

1 Jan 1968

5120-14-416-7560
Mandrin Presse

144167560
537403: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-031-5369

5120-14-525-0980
D'axe Extracteur

145250980
006555092: RNCC: 3 | RNVC: 2
006555092: RNCC: 5 | RNVC: 9

18 May 2001

5120-14-429-1394
En Et Bague Mandrin

144291394
536794: RNCC: 3 | RNVC: 2

11 Jan 1989

5120-14-332-1410

5120-14-338-0771
Outil D'installatio

143380771
R282851: RNCC: 3 | RNVC: 2

6 Nov 1976

5120-14-240-6137

5120-14-266-7054

5120-14-453-7808
Lot D'ergots

144537808
1055882S00: RNCC: 3 | RNVC: 2

10 Mar 1992

5120-14-333-3848

5120-14-558-8023
Six Point Tip Screwdriver

145588023
775463: RNCC: 3 | RNVC: 2
ANXP5X50: RNCC: 3 | RNVC: 2
3148517754638: RNCC: 5 | RNVC: 2

6 Nov 2008

5120-14-424-6607
Bride Darret

144246607
5000261287: RNCC: 3 | RNVC: 2
89409864: RNCC: 5 | RNVC: 2

2 Jun 1988

5120-14-289-0313

5120-14-503-5742
Detent Handling Tool

145035742
MGD104-28: RNCC: 3 | RNVC: 2

21 Jan 1998

5120-14-484-6503
Socket Wrench Socket

144846503
NO PRIMARY REF14-484-6503: RNCC: 3 | RNVC: 2
3148510532912: RNCC: 5 | RNVC: 2
RB.11: RNCC: 5 | RNVC: 2
0053291: RNCC: 5 | RNVC: 9

28 Nov 1996

5120-14-274-0831
Socket Head Screw Key

142740831
0124100: RNCC: 3 | RNVC: 2
83-10: RNCC: 5 | RNVC: 2
83.10: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-406-0220
Electrical Contact Remover

144060220
8700-548: RNCC: 3 | RNVC: 2
878419: RNCC: 5 | RNVC: 2
91492568: RNCC: 5 | RNVC: 2
878419: RNCC: 5 | RNVC: 2

8 Jan 1986

5120-14-213-9280
Manche De Serrage S

142139280
NO PRIMARY REF14-213-9280: RNCC: 3 | RNVC: 2
X200115: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-537-4484
Socket Head Screw Key

145374484
82H.2-5H0P: RNCC: 3 | RNVC: 2

3 Nov 2003

5120-14-559-3408
Mechanical Puller

145593408
82423791000: RNCC: 3 | RNVC: 2

18 Dec 2008

5120-14-446-6403
Lame De Cambrage

144466403
8815366001: RNCC: 3 | RNVC: 2

9 Apr 1991

5120-14-204-7373

5120-14-318-6243
Spanner Wrench

143186243
C46323: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-458-6302
Combination Open End And Spanner Wrench

144586302
M4HZ7101930121: RNCC: 3 | RNVC: 2

29 Oct 1992

5120-14-542-4806
Spanner Wrench

145424806
8044165C00: RNCC: 3 | RNVC: 2

21 Jul 2004

5120-14-514-6715
Hand Terminal Crimping Tool

145146715
HT50: RNCC: 3 | RNVC: 2

8 Jun 1999

5120-14-256-5823
Open End Wrench

142565823
PR46911: RNCC: 3 | RNVC: 2

1 Jan 1969

5120-14-504-6860
Socket Wrench Adapter-Extension

145046860
EF.6P1: RNCC: 3 | RNVC: 2
022918: RNCC: 5 | RNVC: 1
EF6P1: RNCC: 5 | RNVC: 2
3148510229188: RNCC: 5 | RNVC: 2
0614 176 673: RNCC: 5 | RNVC: 2

27 Feb 1998

5120-14-462-9119
Bearing And Bushing Inserter And Remover

144629119
45057920: RNCC: 3 | RNVC: 2
45057920: RNCC: 5 | RNVC: 9

5 May 1993

5120-14-345-0182
Socket Wrench Socket

143450182
3901530: RNCC: 3 | RNVC: 2

5 Oct 1977

5120-14-530-2060
Pliers

145302060
432.LE: RNCC: 3 | RNVC: 2
3148511760031: RNCC: 5 | RNVC: 2

22 May 2002

5120-14-358-7188
Cimblot De Compress

143587188
8812443004: RNCC: 3 | RNVC: 2

7 Sep 1979

5120-14-428-5344
Fixation Entretoise

144285344
MKA4502104: RNCC: 3 | RNVC: 2

8 Dec 1988

5120-14-352-5085

5120-14-565-8896
Cross Tip Screwdriver

145658896
AP0X75VE: RNCC: 3 | RNVC: 2

1 Oct 2010

5120-14-410-9074
Patins De Serrage

144109074
39086921: RNCC: 3 | RNVC: 2
39086921: RNCC: 5 | RNVC: 9

23 Jul 1986

5120-14-321-1588
Screw Thread Insert Inserter

143211588
01500107000: RNCC: 3 | RNVC: 2
1735A07100: RNCC: 5 | RNVC: 2
32240790: RNCC: 5 | RNVC: 2
0150-01M7: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-479-0359
Torque Wrench Adapter

144790359
888-374-900-1: RNCC: 3 | RNVC: 2

6 Dec 1995

5120-14-256-1541

5120-14-543-5530
Retaining Ring Installation Tool

145435530
010620044P: RNCC: 3 | RNVC: 2

20 Nov 2004

5120-14-406-6206

5120-14-319-6911

5120-14-322-8668

5120-14-378-8439
Controle Bague

143788439
UJD232-50: RNCC: 3 | RNVC: 2
UJD232-50: RNCC: 5 | RNVC: 2

11 Aug 1982

5120-14-406-5633
Guidage Broche

144065633
853-201-018-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-222-1057
Socket Wrench Socket

142221057
R11: RNCC: 3 | RNVC: 2
R-11: RNCC: 3 | RNVC: 2
3272670214088: RNCC: 5 | RNVC: 2

1 Jan 1966

5120-14-561-2513
Pliers

145612513
204-A18B: RNCC: 3 | RNVC: 2

30 Jun 2009

5120-14-466-3704
Spanner Wrench

144663704
61AM002: RNCC: 3 | RNVC: 2

3 Nov 1993

5120-14-445-4430
Leveling-Support Jack

144454430
MB1018F00: RNCC: 3 | RNVC: 2

14 Feb 1991

5120-14-462-9116
Bearing And Bushing Remover

144629116
45057914: RNCC: 3 | RNVC: 2
45057914: RNCC: 5 | RNVC: 9

5 May 1993

5120-14-375-5008
Vise Jaw Caps

143755008
40647: RNCC: 3 | RNVC: 2

26 Feb 1982

5120-14-271-6096
Open End Wrench

142716096
E74301C20WWF: RNCC: 2 | RNVC: 1

1 Jan 1970

5120-14-449-8751
Bearing And Bushing Remover

144498751
60720: RNCC: 3 | RNVC: 2
91705856: RNCC: 5 | RNVC: 2

11 Sep 1991

5120-14-394-9196
Socket Head Screw Key

143949196
20735416: RNCC: 3 | RNVC: 2

2 Oct 1984

5120-14-354-8663
Open End Wrench

143548663
187554: RNCC: 3 | RNVC: 2

20 Feb 1979

5120-14-467-6739
Spring Inserter And Remover

144676739
2000-7566: RNCC: 3 | RNVC: 2

21 Jan 1994

5120-14-548-1882
Torque Wrench Adapter

145481882
13.22: RNCC: 3 | RNVC: 2

14 Dec 2005

5120-14-488-6907
Spanner Wrench

144886907
206647: RNCC: 3 | RNVC: 2

28 May 1997

5120-14-399-4020
Socket Wrench Socket

143994020
95AM004: RNCC: 3 | RNVC: 2
95AM00424: RNCC: 5 | RNVC: 2

6 Mar 1985

5120-14-380-8383
Spanner Wrench

143808383
C46174: RNCC: 3 | RNVC: 2

14 Dec 1982

5120-14-574-1972
Box Wrench

145741972
1-13-328: RNCC: 3 | RNVC: 2
E113328: RNCC: 5 | RNVC: 9

14 Dec 2012

5120-14-241-6077

5120-14-323-1399
Dynamomet Tournevis

143231399
A204BU: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-556-9747
Woven Cable Grip

145569747
78000215: RNCC: 3 | RNVC: 2

25 Apr 2008

5120-14-323-9118

5120-14-209-9029

5120-14-576-2961
Inserter And Remove

145762961
8811316001: RNCC: 3 | RNVC: 2

11 Jun 2013

5120-14-216-1276

5120-14-465-4695
Bearing And Bushing Inserter And Remover

144654695
851-500-138-0: RNCC: 3 | RNVC: 2

30 Sep 1993

5120-14-488-3141
Flat Tip Screwdriver

144883141
AE.1,2X35: RNCC: 3 | RNVC: 2
3148510048529: RNCC: 5 | RNVC: 2
AE1-2X35: RNCC: 5 | RNVC: 2
0004852: RNCC: 5 | RNVC: 2

30 Apr 1997

5120-14-375-0528
Cle A Panier

143750528
GSM196-010F15: RNCC: 3 | RNVC: 2

30 Jan 1982

5120-14-371-9913
Outil Bague De Biel

143719913
25545980500: RNCC: 3 | RNVC: 2
255459805: RNCC: 5 | RNVC: 9

5 Aug 1981

5120-14-285-5679
Cle Tenue Vilebrequ

142855679
4842P: RNCC: 3 | RNVC: 9
4842: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-575-4257
Open End Wrench

145754257
14100097783: RNCC: 3 | RNVC: 2

5 Apr 2013

5120-14-490-8881
Filiere

144908881
4067 170 000 405: RNCC: 3 | RNVC: 2
F300 0T 000 5153: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-493-0036
Cle

144930036
4065 030 000 198: RNCC: 3 | RNVC: 2
F300 0T 009 4367: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-380-6755
Outil Bloc-Pointeau

143806755
24545903600: RNCC: 3 | RNVC: 2
24545001000: RNCC: 5 | RNVC: 2
245450010: RNCC: 5 | RNVC: 9
245459036: RNCC: 5 | RNVC: 9

29 Nov 1982

5120-14-424-9826
Wrench Extension Handle

144249826
M4HZ7101938601: RNCC: 3 | RNVC: 2

16 Jun 1988

5120-14-540-9149
Adjustable Wrench

145409149
113A.10C: RNCC: 3 | RNVC: 2
8051581L00: RNCC: 5 | RNVC: 2

5 May 2004

Load More Results