What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.

A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Blacksmith's Punch?

A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Mechanical Finger?

A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.

A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Screwdriver And Wrench Assembly?

A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Stakeholder Bench Plate?

A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.

What is a Drill Drift?

A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.

A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Digging Bar?

A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

What is a Valve Spring Lifter?

A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.

What is a Fuse Puller?

A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.

Hand Tools, Nonedged, Nonpowered - France (FR)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by France (FR) - NCB is 14

Page 48 of 110

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by France

51	20	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - France (FR)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 16 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Pipe Vise? 19 Items: A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.
What is a Hand Vise? 25 Items: A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.
What is a Hand Hydraulic Jack? 133 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 153 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 903 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 17 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
Swage,Bottom,Blacksmith's 10 Items
What is a Hand Tube Flaring Tool? 23 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Blacksmith's Punch? 12 Items: A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.
What is a Drain Plug Wrench? 45 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 57 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 16 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 3829 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
Flatter,Blacksmith's 18 Items
Swage,Top,Blacksmith's 12 Items
What is a Pipe Wrench? 110 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 149 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 53 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
Screwdriver,Offset 54 Items
What is a Screwdriver Bit? 707 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Mechanical Finger? 25 Items: A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.
What is a Socket Wrench Socket? 1803 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 1412 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 1641 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 52 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 565 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
Jack,Push-Pull,Screw 30 Items
What is a Hand Tube Bender? 54 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 1106 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 55 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pinch Bar? 19 Items: A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.
What is a Pry Bar? 17 Items: A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.
What is a Wrecking Bar? 15 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 273 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 413 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 32 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 295 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
Face,Hammer,Inserted 25 Items
What is a Hole Sheet Metal Holder? 37 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Screwdriver And Wrench Assembly? 11 Items: A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.
What is a Hand Rivet Set? 121 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Stakeholder Bench Plate? 22 Items: A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.
What is a Drill Drift? 32 Items: A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.
What is a Tack Claw? 15 Items: A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.
Mattock 28 Items
What is a Socket Wrench Handle Bar? 108 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Stake,Sheet Metalworking 50 Items
Riveter,Blind,Hand 76 Items
What is a Hand Shovel? 43 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 98 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 30 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
What is a Digging Bar? 20 Items: A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.
Block,Dolly,Sheet Metalworking 56 Items
What is a Piston Ring Compressor? 34 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Valve Spring Lifter? 29 Items: A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.
What is a Fuse Puller? 20 Items: A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.
What is a Hand Lead Seal Press? 18 Items: A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.
What is a Hand Beading Tool? 91 Items: A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.
What is a Hand Hammer? 502 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
Head,Hand Hammer 81 Items
What is a Lamp Extractor? 76 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Tube Packing Ring Installing Tool? 29 Items: A Tube Packing Ring Installing Tool (INSTALLING TOOL,TUBE PACKING RING) is an item designed to insert packing rings on tubes within tube sheets on condensers and similar heat exchangers. In operation, the packing rings are assembled on the loading pin mandrel and are then transferred from the mandrel on to the tube by means of a tubular sleeve which slides on the mandrel.
What is a Carpenters' Pincers? 18 Items: A Carpenters' Pincers (PINCERS,CARPENTERS') is a plierlike hand tool having two opposing jaws which may have hammerlike backs. One handle has a nail or tack pulling claw, the other is shaped to form a screwdriver. The tool may contain a wire cutter. See also NIPPERS, END CUTTING and PINCERS, FARRIERS'.
What is a Trowel? 33 Items: A Trowel is a tool used for bricklaying, concrete work, plastering, linoleum laying, and masonry work. Excludes CORNER TOOL, CONCRETE.
What is a Hand Abrasive Wheel Dresser? 12 Items: A Hand Abrasive Wheel Dresser (DRESSER,ABRASIVE WHEEL,HAND) is a tool designed to remove glaze from, dress, shape, sharpen, and true solid abrasive wheels. Excludes NIB, DIAMOND, WHEEL DRESSING.
What is a Lamp Cap Extractor? 32 Items: A Lamp Cap Extractor (EXTRACTOR,LAMP CAP) is a tool specifically designed to facilitate the removal of lamp caps from switchboards, panels or indicator lamps.
What is a Rivet Bucking Bar? 51 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 86 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 277 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Woven Cable Grip? 23 Items: A Woven Cable Grip (GRIP,CABLE,WOVEN) is a braided wire device designed to clutch a bare or insulated conductor, cable or wire rope, for holding taut or drawing through conduit.
What is a Screw Thread Insert Extractor? 19 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is an Electron Tube Extractor? 18 Items: An Electron Tube Extractor (EXTRACTOR,ELECTRON TUBE) is a hand tool designed to facilitate the removal of electron tubes from electronic equipment and to avoid burning the fingers. It may be used for installing tubes.
What is a Cross Tip Screwdriver? 362 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 21 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 11 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 37 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Tool Handle Wedge? 10 Items: A Tool Handle Wedge (WEDGE,TOOL HANDLE) is excludes WEDGE, WOOD.
What is a Marlinespike? 16 Items: A Marlinespike is a metal hand tool made in the shape of a tapered pin. One end is pointed and the opposite end may be headed. The body may contain an eye for a lanyard sling, or be grooved lengthwise. Excludes CABLE PICK and FID.
What is an Aligning Punch? 272 Items: An Aligning Punch (PUNCH,ALIGNING) is a round, square, hexagonal or octagonal bodied hand tool, having a round tapered section 6-1/2 inches (165.1 mm) or more in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, DRIFT and DRIFTPIN.
What is a Drift Punch? 25 Items: A Drift Punch (PUNCH,DRIFT) is a round, square, hexagonal, or octagonal bodied hand tool, having a round tapered section 4 to 6 inches (101.6 mm to 152.4 mm) inclusive in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, ALIGNING; and DRIFTPIN.
What is a Putty Knife? 36 Items: A Putty Knife (KNIFE,PUTTY) is a hand tool with a nonedged blade fixed to a handle for laying on and smoothing putty and the like.
What is a Socket Wrench Adapter-Extension? 40 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 30 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 184 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Socket Wrench Ratchet Attachment? 47 Items: A Socket Wrench Ratchet Attachment (RATCHET ATTACHMENT,SOCKET WRENCH) is a connection for socket wrenches and handles. Consists of a ratcheting mechanism with an internal drive on one end and an external drive on the opposite end of the same size. The item is designed to permit continuous rotation of the socket in one direction without removing the socket or handle and without a complete rotation of the handle.
What is a Wrench Extension Handle? 81 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Socket Wrench Crowfoot Attachment? 155 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 33 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 43 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 48 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 2394 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 372 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 300 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 661 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 32 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand-Operated Grommet And Eyelet Press? 12 Items: A Hand-Operated Grommet And Eyelet Press (PRESS,GROMMET AND EYELET,HAND-OPERATED) is a device which punches or pierces holes and in addition fastens or sets eyelets and grommets in cloth, paper and similar material. May be used for fastening or setting rivets, lacing hooks and snaps in cloth, paper and similar material. It is hand operated by lever or screw action. See also PUNCH, EYELET, PLIER TYPE and PRESS, GROMMET AND EYELET, FOOT OPERATED.
What is a Claw Bar? 19 Items: A Claw Bar (BAR,CLAW) is before using, refer to Reference Drawing Group AG.
What is a Shock Type Wheel Stud Nut Wrench? 11 Items: A Shock Type Wheel Stud Nut Wrench (WRENCH,WHEEL STUD NUT,SHOCK TYPE) is a manually operated item designed to remove wheel stud nuts. In operation the inner nut is turned by a socket attached to a shaft on which is a loose swinging weighted handle. The weighted handle may be swung quickly to provide an impact force against the socket to loosen the seized or jammed nuts. The outer nut is held stationary by a separate hexagonal holding wrench.
What is a Drift Pin Set? 30 Items: A Drift Pin Set is a group of DRIFTPIN having different characteristics.
What is a Tire Iron? 25 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 115 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Blacksmith's Vise? 14 Items: A Blacksmith's Vise (VISE,BLACKSMITH'S) is a clamping device consisting of a mounting plate, one stationary and one manual screw actuated jaw and a supporting member extending downward from the stationary jaw to the floor. Designed to be mounted on a bench, table or the like. May include pipe holding jaws.
What is a Machinist's Vise? 64 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Clamp Base Bench Vise? 10 Items: A Clamp Base Bench Vise (VISE,BENCH,CLAMP BASE) is a clamping device consisting of a base, one stationary and one manual screw actuated jaw, and one or more guide bars or rods. Designed with an integral clamp for attaching to a bench, table, or the like. Does not include pipe holding jaws.
What is a Fixed Open End Wrench Set? 86 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Nail Set? 11 Items: A Nail Set is a round knurled, square, hexagonal or octagonal bodied hand tool having a round tapered section terminating in a cupped point. It is designed to set brad head nails below the surface by striking it a hammerlike blow. See also PUNCH, DRIVE PIN.
What is a Socket Wrench Set? 202 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is an Open End Box Wrench Set? 10 Items: An Open End Box Wrench Set (WRENCH SET,OPEN END BOX) is a group of WRENCH, OPEN END BOX having different characteristics.
What is a Combination Box And Open End Wrench Set? 72 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Box Wrench Set? 36 Items: A Box Wrench Set (WRENCH SET,BOX) is a group of box wrenches having different characteristics. It may include a HANDLE, EXTENSION WRENCH. See also WRENCH SET, COMBINATION, BOX AND OPEN END.
What is a Hot Line Stick? 26 Items: A Hot Line Stick is a hand tool consisting of a straight, round stick (pole) made of a suitable nonconductive material with a tool fixed to one end. The other end may be plain or have a butt mounting device fixed to it. Various types of attachments (hooks, rings, and bands) may be fixed to the body. It is designed for use in the repair and maintenance of live high voltage aerial lines. Excludes hot line sticks without heads.
Handle,Mattock-Pick 15 Items
What is a Wrench Kit? 73 Items: A Wrench Kit is an assortment of various types and sizes of wrenches such as SOCKET, SOCKET WRENCH; WRENCH, OPEN END, FIXED; WRENCH, BOX and the like. It may include adapter(s), ratchet(s) and the like. See also WRENCH SET (as modified.
What is a Brad Awl? 15 Items: A Brad Awl (AWL,BRAD) is a small, pointed tool used by shoemakers, saddlers, cabinetmakers, and the like for piercing small holes in wood, leather, and similar materials, and consists of a handle with a ferrule and a blade. The blade is round, terminating in a beveled, sharp straight edge and has a shank which passes through the center of the handle.
What is a Scratch Awl? 20 Items: A Scratch Awl (AWL,SCRATCH) is an item whose nominal length of blade is less than 4 inches (101.6 millimeters) and is provided with a nondetachable handle.
What is a Screw Extractor Set? 10 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 102 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
Jack,Scissors,Hand 26 Items
What is a Piston Ring Expander? 23 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
Mallet,Plastic 62 Items
Mallet,Rubber 10 Items
What is a Wood Mallet? 37 Items: A Wood Mallet (MALLET,WOOD) is excludes MALLET, CALKING; MALLET, HAWSING and MALLET, SERVING.
What is a Rack Bar Jack? 30 Items: A Rack Bar Jack (JACK,RACK BAR) is excludes JACK, BUMPER and JACK, REEL, HAND.
What is a Pneumatic Tire Valve Core Inserter And Remover? 14 Items: A Pneumatic Tire Valve Core Inserter And Remover (INSERTER AND REMOVER,PNEUMATIC TIRE VALVE CORE) is a bar of steel having a small cylindrical slotted end for removing or installing a valve core in a valve stem by a screwing motion. See also REPAIR TOOL, PNEUMATIC TIRE VALVE.
What is a Hand Tube Swaging Tool Kit? 20 Items: A Hand Tube Swaging Tool Kit (SWAGING TOOL KIT,TUBE,HAND) is a hand-operated noncutting tool consisting of one or more PUNCH, TUBE SWAGING, HAND and a tube flaring bar.
What is a Hand Tube Flaring Punch? 11 Items: A Hand Tube Flaring Punch (PUNCH,TUBE FLARING,HAND) is a noncutting tool having a shaped end or section designed to flare the ends of tubes. One type is designed to flare the ends of tubes against a tube sheet, and another to flare tube ends to mate with tube fittings. Includes punch components of FLARING TOOL, TUBE, HAND.
What is a Hose Strap Band Clamping Tool? 26 Items: A Hose Strap Band Clamping Tool (CLAMPING TOOL,STRAP BAND,HOSE) is an item designed to tension and lock metal straps around a rubber hose, and the like. It is also used to clamp and hold fittings therein.
What is a Mechanical Puller? 3073 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 470 Items
What is a Slip Joint Pliers? 84 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Brake Repair Pliers? 14 Items: A Brake Repair Pliers (PLIERS,BRAKE REPAIR) is a tool having jaws designed for use in brake repair operations, such as removing and replacing items such as keys, springs, and the like. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 226 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 12 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 81 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 56 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 15 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 11 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 29 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Cross Tip Screwdriver Set? 14 Items: A Cross Tip Screwdriver Set (SCREWDRIVER SET,CROSS TIP) is a group of SCREWDRIVER, CROSS TIP having different characteristics.
What is a Spanner Wrench Set? 18 Items: A Spanner Wrench Set (WRENCH SET,SPANNER) is a group of items under WRENCH, SPANNER having different characteristics.
What is a Drive Pin Punch Set? 31 Items: A Drive Pin Punch Set (PUNCH SET,DRIVE PIN) is a group of PUNCH, DRIVE PIN having different characteristics.
What is an Aligning Punch Set? 13 Items: An Aligning Punch Set (PUNCH SET,ALIGNING) is a group of PUNCH, ALIGNING having different characteristics. See also DRIFTPIN SET.
What is a Slugging Type Box Wrench Socket? 16 Items: A Slugging Type Box Wrench Socket (SOCKET,SLUGGING TYPE BOX WRENCH) is an item having a hexagonal external drive at one end, made to fit into the internal hexagonal or 12-point opening of a slugging type box wrench. The opposite end has a single-broached hexagonal opening of the same size as the external drive. The item is designed with extra thick walls to withstand the impact of sledge blows on the driving wrench.
What is a Mechanical Puller Step Plate? 44 Items: A Mechanical Puller Step Plate (STEP PLATE,MECHANICAL PULLER) is a circular disk, flanged to provide a shoulder, and designed to provide a base for the screw point of a PULLER, MECHANICAL when pulling externally mounted bearings, gears, and the like from hollow shafts or housings. It has a concentric, countersunk hole to accommodate the puller screw point.
What is a Solid Center Punch? 79 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Cable Type Ratchet Lever Puller? 20 Items: A Cable Type Ratchet Lever Puller (PULLER,RATCHET LEVER,CABLE TYPE) is an item consisting of a metal frame and ratchet lever reel to which is attached one end of a flexible cable (wire rope). The cable feeds through the fast eye in the metal frame, and may be reeved through a slip hook tackle hook. See also BINDER, LOAD; HOIST, WIRE ROPE and STRETCHER, WIRE.
What is an Electronic Equipment Tuning Wand? 18 Items: An Electronic Equipment Tuning Wand (TUNING WAND,ELECTRONIC EQUIPMENT) is a hand-held rod used in determining the adjustment of the windings of a radio frequency coil. It is made of insulating material with iron on one end and brass on the other end. By inserting the iron end in the coil, the inductance is increased and by inserting the brass end, the inductance is decreased.
What is a Combination Open End And Spanner Wrench? 14 Items: A Combination Open End And Spanner Wrench (WRENCH,OPEN END AND SPANNER,COMBINATION) is a tool having open end wrench characteristics at one end and spanner wrench features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s) at the other end.
What is a Detent Handling Tool? 187 Items: A Detent Handling Tool (HANDLING TOOL,DETENT) is a specially designed handling tool consisting of a rigid bar with a T-handle on one end. The other end is equipped with threads designed to mate the threads of a detent to facilitate inserting or extracting.
What is a Hand Material Handling Hook? 23 Items: A Hand Material Handling Hook (HOOK,MATERIAL HANDLING,HAND) is a hook whose curved end conforms to Style AP1, AP2, AP3 or AP4 of Reference Drawing Group AP. Excludes HOOK, MANHOLE COVER, HAND; HOOK, WIRE BREAKING, HAND; HOOK, ROCK CRUSHER FEEDING, HAND; HOOK, STRAINER REMOVING, HAND and HOOKS, BAG HANDLING, HAND.
What is a Magnetic Retrieving Tool? 11 Items: A Magnetic Retrieving Tool (RETRIEVING TOOL,MAGNETIC) is a hand-operated magnetic device used to locate and pick up metallic articles, such as bolts, nuts, pins, washers, and the like, in confined spaces. It may be rigid, flexible or adjustable. Excludes FINGER, MECHANICAL.
What is a Mechanical Puller Adapter? 78 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Combination Box And Open End Box Wrench? 13 Items: A Combination Box And Open End Box Wrench (WRENCH,BOX AND OPEN END BOX,COMBINATION) is a double end wrench, box and open end box, primarily designed for removing or replacing tube fittings. The opening in the open end box may be machined at an angle from the longitudinal center line of the wrench.
What is a Screw Thread Insert Inserter? 136 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Flat Tip Screwdriver Set? 48 Items: A Flat Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP) is a group of SCREWDRIVER, FLAT TIP having different characteristics.
What is a Terminal Crimping Tool Contact Positioner? 89 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 16 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is an Adjustable Wrench? 138 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 239 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 75 Items
Handle,Shovel 10 Items
What is a Socket Wrench Spanner Attachment? 88 Items: A Socket Wrench Spanner Attachment (SPANNER ATTACHMENT,SOCKET WRENCH) is an item having an adjustable or fixed span with pin, hook, or key type end that is used to fit and turn various size retaining rings, cover plates, plugs, couplings, and like parts. Usually designed to be driven by a male driver.
What is a Retaining Ring Installation Tool? 44 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Tacker? 16 Items: A Tacker is a hand-operated, hammerlike or gunlike item without a clincher, used to drive preformed connecting elements like pins, nails or staples through one object or piece of material into another. Excludes STAPLER (as modified).
What is a Bearing And Bushing Inserter? 290 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 207 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 939 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 14 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 93 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 161 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 94 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 141 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 53 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Six Point Tip Screwdriver? 155 Items: A Six Point Tip Screwdriver (SCREWDRIVER,SIX POINT TIP) is a manual screwdriver having a single nonremoveable blade having a tip with six rounded points.
What is a Seal Inserter And Remover? 147 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 478 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is a Preformed Packing Inserter And Remover? 34 Items: A Preformed Packing Inserter And Remover (INSERTER AND REMOVER,PREFORMED PACKING) is a hand tool designed to install and remove a PACKING, PREFORMED.
What is a Pin Remover? 34 Items: A Pin Remover (REMOVER,PIN) is a hand tool designed to facilitate the removal of a pin from a hole.
What is a Pin Inserter And Remover? 13 Items: A Pin Inserter And Remover (INSERTER AND REMOVER,PIN) is a rodlike tool designed to facilitate the insertion and removal of a pin from a hole.
What is an Electrical Contact Inserter And Remover? 37 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Piston Inserter? 40 Items: A Piston Inserter (INSERTER,PISTON) is a tool designed to permit installation of a piston or piston assembly without damaging the packings or piston.
What is a Spring Inserter And Remover? 85 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 13 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Stud Inserter? 22 Items: A Stud Inserter (INSERTER,STUD) is a device designed to drive in studs. It does not have any facilities for removing or extracting studs. See also INSERTER AND REMOVER, STUD.
What is a Stud Inserter And Remover? 17 Items: A Stud Inserter And Remover (INSERTER AND REMOVER,STUD) is a group of items designed to extract and to drive studs. It may include collets, guides, housings, holders and the like. See also REMOVER SET, STUD and INSERTER, STUD.
What is a Gear Inserter? 54 Items: A Gear Inserter (INSERTER,GEAR) is a hand tool designed to install various gears onto a gearshaft. It may be operated by a pushing or a striking force.
What is a Crimping Tool Die? 73 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is an Electrical Connector Inserter? 45 Items: An Electrical Connector Inserter (INSERTER,ELECTRICAL CONNECTOR) is a hand tool designed to hold an electrical connector, and to assist in the positioning and installation of the connector on a cover, panel or the like.
What is a Float? 12 Items: A Float is a tool used for concrete, plastering and grouting work.
What is a Mechanical Puller Set? 19 Items: A Mechanical Puller Set (PULLER SET,MECHANICAL) is two or more separate PULLER, MECHANICAL of different fixed sizes.
What is a Lifting Pneumatic Bag? 11 Items: A Lifting Pneumatic Bag (PNEUMATIC BAG,LIFTING) is a device made of flexible material designed to lift another item by being placed under the item and being inflated with air or some other gas. It will have a means of being connected to an air or gas source and may include a connector hose, a control valve and/or a pressure regulator.
What is a Cable Tie Installation Tool? 22 Items: A Cable Tie Installation Tool (INSTALLATION TOOL,CABLE TIE) is a lightweight, hand-held, hand-operated tool designed to fasten cable ties, straps and the like. Cable tie is inserted into the nose of the tool flush to the cable tie head. Trigger handle tightens cable tie and cuts off any excess. These installation tools are available in a variety of sizes depending on their intended use with miniature, intermediate, standard, heavy or extra heavy cross section ties.
What is a Bearing Staking Installation Tool? 159 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
Wrench Set,Ratchet 15 Items
What is a Sealant Dispenser? 26 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Retaining Ring Pliers Set? 10 Items: A Retaining Ring Pliers Set (PLIERS SET,RETAINING RING) is a group of PLIERS, RETAINING RING having different characteristics.
What is a Hand Armament Subsystem Carrier? 52 Items: A Hand Armament Subsystem Carrier (CARRIER,ARMAMENT SUBSYSTEM,HAND) is a metallic item with a clamp device and/or space for depositing articles. It is used for transporting weapon parts during maintanence and/or repair work, such as gun barrel, automatic loader, breechblock and the like.
What is a Ring Retaining Pliers Tip Set? 13 Items: A Ring Retaining Pliers Tip Set (TIP SET,PLIERS,RING RETAINING) is a collection of removable metallic tips in matched pairs used to provide various size capablities to PLIERS, RING RETAINING which permits the removal and installation of internal and external retaining rings.
What is a Plug Electrical Connector Extractor? 45 Items: A Plug Electrical Connector Extractor (EXTRACTOR,ELECTRICAL CONNECTOR,PLUG) is a hand tool designed to disassemble CONNECTOR, PLUG, ELECTRICAL from a CONNECTOR, RECEPTACLE, ELECTRICAL.
What is a Torque Wrench Adapter Set? 10 Items: A Torque Wrench Adapter Set (ADAPTER SET,TORQUE WRENCH) is tWO or more ADAPTER, TORQUE WRENCH of different sizes.
What is an Electronic Component Inserter And Remover? 79 Items: An Electronic Component Inserter And Remover (INSERTER AND REMOVER,ELECTRONIC COMPONENT) is an item which can insert or remove an electronic component package such as MICROCIRCUIT; RESISTOR, NETWORK (as modified); and the like from its mounting position or socket. Excludes INSERTER AND REMOVER, ELECTRICAL CONTACT; REMOVER, ELECTRICAL CONTACT; EXTRACTOR, ELECTRICAL CARD; EXTRACTOR, ELECTRONIC CRYSTAL UNIT; EXTRACTOR, ELECTRON TUBE.
What is an Impact Type Bit Set And Handle Screwdriver? 14 Items: An Impact Type Bit Set And Handle Screwdriver (SCREWDRIVER,BIT SET AND HANDLE,IMPACT TYPE) is an item consisting of a set of screwdriver bits and a impact driver to accommodate the bits of various types and characteristics. It is designed to transmit a strong rotating movement by the impact of a hammer blowed on the impact driver. It is used to loosen rusted or seized screws. Excludes SCREWDRIVER, BIT SET AND HANDLE.
What is a Hand Vise Jaw? 19 Items: A Hand Vise Jaw (JAW,VISE,HAND) is an item consisting of two opposing parts of a VISE, HAND. The item is moveable and able to open and close. It can hold, grasp or clamp work.
What is a Screwdriver Handle? 28 Items: A Screwdriver Handle (HANDLE,SCREWDRIVER) is an item used to accommodate various types of BIT, SCREWDRIVER. It is designed to rotate a bit that is used for installing or removing screws.
What is a Wire Twister Pliers? 25 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 284 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is a Mechanical Puller Body? 45 Items: A Mechanical Puller Body (BODY,PULLER,MECHANICAL) is an item designed to support and enclose the internal parts of a PULLER,MECHANICAL.
What is a Flat Tip And Cross Tip Screwdriver Set? 39 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is a Socket Wrench Screwdriver Attachment Set? 22 Items: A Socket Wrench Screwdriver Attachment Set (SCREWDRIVER ATTACHMENT SET,SOCKET WRENCH) is a set of screwdriver attachment, socket wrench of different sizes. Items consist of a female square drive on one end to attach to a handle, socket wrench and various screwdriver tip configurations on the opposite end. Excludes SCREWDRIVER ATTACHMENT,SOCKET WRENCH
What is an Oil Filter Wrench? 44 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 430 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Communications Equipment Spring Adjuster? 13 Items: A Communications Equipment Spring Adjuster (ADJUSTER,SPRING,COMMUNICATIONS EQUIPMENT) is a single or double end tool, equipped with slot(s) of various dimensions or with cylindrical rod(s), used for adjusting the springs or spring tensioned parts of electronic equipment.
What is a Rotating Members Aligning Tool? 32 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
What is a Final Drive Assembly Alignment Pin? 41 Items: A Final Drive Assembly Alignment Pin (ALIGNMENT PIN,FINAL DRIVE ASSEMBLY) is a special designed pin used in the assembling of the final drive.
Arm,Handling Tool 77 Items
What is a Splicing Sleeve Compressing Tool? 23 Items: A Splicing Sleeve Compressing Tool (COMPRESSING TOOL,SPLICING SLEEVE) is a hand tool having hinged leverage handles similar to a CUTTER, BOLT or pliers, designed to compress a splicing sleeve when joining the ends of two conductors, or when forming an eye splice in the end of a wire rope. Excludes CRIMPING TOOL, TERMINAL, HAND.
What is a Hand Screw Jack Extension? 14 Items: A Hand Screw Jack Extension (EXTENSION,HAND SCREW JACK) is a length of externally threaded rigid shafting which is the adjustable section of a JACK, SCREW, HAND.
What is a Mechanical Puller Gear Adapter? 21 Items: A Mechanical Puller Gear Adapter (GEAR ADAPTER,PULLER,MECHANICAL) is an adapter that adapts a PULLER,MECHANICAL, to pull a certain gear.
Handle,Hydraulic Jack 18 Items
What is a Female Electrical Contact Resizing Tool? 11 Items: A Female Electrical Contact Resizing Tool (RESIZING TOOL,FEMALE ELECTRICAL CONTACT) is a tool designed to shape to a specific size, female contacts such as those used on electrical connectors, tube sockets, crystal sockets, and pin jacks.
What is a Screwdriver And Socket Wrench Combination? 13 Items: A Screwdriver And Socket Wrench Combination is a hand-tool formed into an integral unit with a socket wrench at one end and a screwdriver bit at the other end. See also SCREWDRIVER AND WRENCH ASSEMBLY.
What is a Hand Hose Fitting Swaging Tool Kit? 11 Items: A Hand Hose Fitting Swaging Tool Kit (SWAGING TOOL KIT,HOSE FITTING,HAND) is a device, hydraulically actuated by hand or power operated pump, consisting of face plate, adapter plate, finger cages, fingers, ram, bushing, and expanding mandrels combined on a single base in various functional arrangements. It is used for swaging the outside diameter of hose assembly fittings, expanding the inside diameter of hose assemblies, and securing the fabrication of hose assemblies. Included are a hand or power operated pump, lubricant, cases, and trays.
What is a Catch Lever Tool? 12 Items: A Catch Lever Tool (LEVER TOOL,CATCH) is a specially designed hand tool which engages the opening and closing lever of a CATCH (as modified) for ease of operation. It is constructed of thin rigid material, usually flat, and one end has an engaging tongue.
What is a Manual Impact Wrench? 11 Items: A Manual Impact Wrench (WRENCH,IMPACT,MANUAL) is a manually operated handheld tool consisting of spring-loaded handle and a power-impact head which delivers a torsional impact from either continuous movement of the handle in one direction, or by a reciprocating action. It is used in tightening and loosening fasteners, such as bolts, nuts, and the like. The item may include sockets, extensions and offset fittings, nut runners, and the like.
What is a Drift? 63 Items: A Drift is an item consisting of a tubular body fitted with replaceable tips. It is designed to insert or remove mechanical components where space is restricted.
What is a Nutdriver? 46 Items: A Nutdriver is a non-powered hand tool with a screwdriver style handle, shaft and formed female hex or square socket at driving end.
What is a Locking Device Removal Tool? 12 Items: A Locking Device Removal Tool (REMOVAL TOOL,LOCKING DEVICE) is a hand tool designed to facilitate the removal of a WASHER, KEY and a LOCKING PLATE, NUT AND BOLT.
What is a Hydraulic Fitting Crimping Tool Head? 26 Items: A Hydraulic Fitting Crimping Tool Head (HEAD,CRIMPING TOOL,HYDRAULIC FITTING) is a component of a crimping tool used to compress fittings on fluid tubes. It consists of a U-shape item, in which, are mounted different sizes of DIE, CRIMPING TOOL for tubes of various diameters.
What is a Torque Screwdriver? 11 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.
What is a Special Purpose Combination Wrench? 13 Items: A Special Purpose Combination Wrench (WRENCH,COMBINATION,SPECIAL PURPOSE) is a tool having a combination of ends and facets. The ends may have open end, box or spanner characteristics. The sides may have features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s). Designed to fit specific items, not sized as standard or metric.
What is a Screwdriver Bit Holder? 56 Items: A Screwdriver Bit Holder (HOLDER,SCREWDRIVER BIT) is an attachment with a socket end for accepting male hexagon shank insert bits and a drive end for adapting to a portable power or hand tool.
What is a Telescoping Pole? 16 Items: A Telescoping Pole (POLE,TELESCOPING) is an item which is designed to be extended or compressed by the sliding of overlapping sections. This item may or may not be able to accommodate an extension.

Stock Items From Supply Class 5120 Page 48 of 110

5120-14-285-6418

5120-14-239-2135

5120-14-302-5095

5120-14-305-0189
Outillage De Depose

143050189
B252FS105A: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-225-3188

5120-14-427-0983
Chariot Cric

144270983
540687: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-287-2107

5120-14-559-1272
Face Spanner Wrench Socket

145591272
J47425: RNCC: 3 | RNVC: 2
J47425: RNCC: 5 | RNVC: 2

9 Dec 2008

5120-14-493-0064
Bedane

144930064
4067 030 000 329: RNCC: 3 | RNVC: 2
F300 0T 009 4427: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-571-8911
Torque Wrench Adapter

145718911
13.27: RNCC: 3 | RNVC: 2

22 May 2012

5120-14-347-6401

5120-14-210-4302

5120-14-364-7908
Valve Spring Lifter

143647908
16849324: RNCC: 3 | RNVC: 2
16849324: RNCC: 5 | RNVC: 9

2 Sep 1980

5120-14-538-7129
Solid Center Punch

145387129
NGM0010281514892: RNCC: 2 | RNVC: 2

9 Dec 2003

5120-14-535-2249
Hand Blind Riveter

145352249
60207321: RNCC: 3 | RNVC: 2

14 May 2003

5120-14-246-7837

5120-14-345-0191
Pose Joint Mandrin

143450191
3901467: RNCC: 3 | RNVC: 2

5 Oct 1977

5120-14-249-0653

5120-14-428-5240
Fixation Plaque

144285240
MFG4502102: RNCC: 3 | RNVC: 2

8 Dec 1988

5120-14-327-0845
Embout Tige Daccord

143270845
1066015: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-358-4680
Socket Head Screw Key

143584680
0124480: RNCC: 3 | RNVC: 2
63 5-32: RNCC: 3 | RNVC: 2
63-5-32: RNCC: 3 | RNVC: 2
63-5/32: RNCC: 3 | RNVC: 2
83 5-32: RNCC: 5 | RNVC: 2
83.5/32: RNCC: 5 | RNVC: 2
3272670258853: RNCC: 5 | RNVC: 2

13 Aug 1979

5120-14-412-9787
Torque Wrench Adapter

144129787
853-100-232-0: RNCC: 3 | RNVC: 2

5 Nov 1986

5120-14-309-6623
Outil Dinsertion

143096623
CIT201612: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-299-3124

5120-14-319-3065
Matrice De Sertissa

143193065
48876: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-404-1183
Emmanchement Outil

144041183
09P634: RNCC: 3 | RNVC: 2

11 Sep 1985

5120-14-565-0519
Retaining Ring Pliers

145650519
197-10A: RNCC: 3 | RNVC: 2
TOOLS-4: RNCC: 5 | RNVC: 2

2 Jul 2010

5120-14-485-8847
Socket Head Screw Key

144858847
K7739-H1049: RNCC: 3 | RNVC: 2
H1049: RNCC: 5 | RNVC: 2

19 Feb 1997

5120-14-498-9376
Cle A Ergot

144989376
758 11-60 4: RNCC: 3 | RNVC: 2
758-11-60-4: RNCC: 3 | RNVC: 2
75811-604: RNCC: 5 | RNVC: 9
F300 0T 013 1894: RNCC: 6 | RNVC: 9

29 Oct 1997

5120-14-323-2060

5120-14-422-2403
Presse Montage Roul

144222403
0373-0U115051: RNCC: 3 | RNVC: 2

24 Feb 1988

5120-14-432-3869
Outillage Mandrin

144323869
547917: RNCC: 3 | RNVC: 2
00547917: RNCC: 5 | RNVC: 2

7 Jun 1989

5120-14-290-8557

5120-14-530-6469
Spanner Wrench

145306469
F1400945: RNCC: 3 | RNVC: 2

1 Jul 2002

5120-14-552-5214
Screwdriver Bit

145525214
EH.208L: RNCC: 3 | RNVC: 2
EH.208L: RNCC: 5 | RNVC: 2
3148510229447: RNCC: 5 | RNVC: 2

11 Jan 2007

5120-14-238-1398
Spanner Wrench

142381398
1121: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-526-5710
Flat Tip Screwdriver

145265710
481784: RNCC: 3 | RNVC: 2

1 Aug 2001

5120-14-320-0114
Extracteur Bagues

143200114
3CGF85A: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-410-3839
Poussoir Outillage

144103839
15737-513: RNCC: 3 | RNVC: 2

18 Jun 1986

5120-14-411-9141
Extracteur Roue

144119141
14189770N: RNCC: 3 | RNVC: 2

16 Sep 1986

5120-14-562-6406
Hose Strap Band Clamping Tool

145626406
OCE90: RNCC: 3 | RNVC: 2

10 Nov 2009

5120-14-572-2662
Hand Armament Subsystem Carrier

145722662
1SH41596800-SI: RNCC: 3 | RNVC: 2

19 Jun 2012

5120-14-209-4221

5120-14-399-5286
Dassemblage Plaque

143995286
3443-54: RNCC: 3 | RNVC: 2

6 Mar 1985

5120-14-348-9772
Spanner Wrench

143489772
E74-323-74A87CUPR0ALU: RNCC: 2 | RNVC: 2

19 Apr 1978

5120-14-270-7138
Open End Wrench

142707138
NO PRIMARY REF14-270-7138: RNCC: 3 | RNVC: 2
74231-23X26: RNCC: 5 | RNVC: 9

1 Jan 1970

5120-14-386-1587
Spanner Wrench

143861587
6801P32-1165-20: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-351-2112
Barre De Maintien

143512112
489014M: RNCC: 3 | RNVC: 2

10 Aug 1978

5120-14-241-0260
Cle Pour Ecrou Bute

142410260
202454: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-264-9577
Spanner Wrench

142649577
0289-78: RNCC: 3 | RNVC: 2
RA289: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-530-5333
Combination Box And Open End Wrench Set

145305333
40R.2PB: RNCC: 3 | RNVC: 2

18 Jun 2002

5120-14-430-3433
Preformed Packing Inserter

144303433
RT16984: RNCC: 3 | RNVC: 2

15 Mar 1989

5120-14-265-0881
Jet Extrac Emmanche

142650881
330A93-2010-00: RNCC: 3 | RNVC: 2
330A93-2010-0000: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-232-9387

5120-14-228-5914

5120-14-225-8915

5120-14-556-1361
Terminal Crimping Tool Contact Positioner

145561361
282572: RNCC: 3 | RNVC: 2

5 Feb 2008

5120-14-377-2788
Spanner Wrench

143772788
TMY20-32-508: RNCC: 3 | RNVC: 2

17 May 1982

5120-14-423-2351
Ens Vis De Poussee

144232351
SP2086D-12: RNCC: 3 | RNVC: 2

14 Apr 1988

5120-14-491-0142
Cle

144910142
4602 007 200 075: RNCC: 3 | RNVC: 2
F300 0T 001 0928: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-309-6618
Outil Dextraction

143096618
CETC4: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-490-8894
Filiere

144908894
4067 170 001 955: RNCC: 3 | RNVC: 2
F300 0T 000 5166: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-491-0208
Necessa

144910208
4602 010 600 009: RNCC: 3 | RNVC: 2
F300 0T 001 1003: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-340-6328

5120-14-228-5116

5120-14-222-7155

5120-14-289-4426
Plaque Dappui

142894426
C46270: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-263-8837

5120-14-217-4701
Extracteur De Lampe

142174701
7040145: RNCC: 3 | RNVC: 2
7040145: RNCC: 3 | RNVC: 9
7040145: RNCC: 5 | RNVC: 2

1 Jan 1965

5120-14-465-5586
Spanner Wrench

144655586
20319612: RNCC: 3 | RNVC: 2

30 Sep 1993

5120-14-239-9887
Jeu De Trois Tourne

142399887
DLT001862: RNCC: 3 | RNVC: 2
DLT01862: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-300-0468

5120-14-566-9661
Mattock

145669661
49008135: RNCC: 3 | RNVC: 2

21 Jan 2011

5120-14-557-4284
Open End Wrench

145574284
CLEF013278X00: RNCC: 3 | RNVC: 2

10 Jun 2008

5120-14-416-7524
Mandrin Presse

144167524
537292: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-406-5737
Jet Bronze

144065737
853-200-891-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-302-6666

5120-14-238-1349
Spanner Wrench

142381349
E74323B11AGW: RNCC: 2 | RNVC: 1
MAS517: RNCC: 3 | RNVC: 2
M112-2-430: RNCC: 5 | RNVC: 2
159-819-170-101: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-391-0288
Torque Wrench Adapter

143910288
1405-121E20-200-00-2: RNCC: 3 | RNVC: 2

1 Mar 1984

5120-14-205-5690
Spanner Wrench

142055690
253-5M112A3: RNCC: 3 | RNVC: 9
RU253-5M112A3A: RNCC: 3 | RNVC: 9
RU253-5M112A3: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-349-3818
Carter Compr Broche

143493818
9970-125-957: RNCC: 3 | RNVC: 2

22 May 1978

5120-14-407-3296
Joints Emmanche

144073296
853-201-106-0: RNCC: 3 | RNVC: 2

12 Feb 1986

5120-14-543-4420
Combination Box And Open End Wrench

145434420
RT8206: RNCC: 3 | RNVC: 2

29 Oct 2004

5120-14-257-9290
Wrench Extension Handle

142579290
30739: RNCC: 3 | RNVC: 2

1 Jan 1969

5120-14-544-2252
Hand Material Handling Hook

145442252
154621: RNCC: 3 | RNVC: 2

11 Jan 2005

5120-14-431-7799
Spanner Wrench

144317799
0411-60154: RNCC: 3 | RNVC: 2

10 May 1989

5120-14-212-2424

5120-14-387-7323
Electrical Card Extractor

143877323
20110558: RNCC: 3 | RNVC: 2
20110558: RNCC: 5 | RNVC: 9

12 Oct 1983

5120-14-323-1312

5120-14-457-9947
Seal Inserter And Remover

144579947
548088: RNCC: 3 | RNVC: 2

2 Oct 1992

5120-14-393-8842

5120-14-540-8359
Gravier Rateau

145408359
470304: RNCC: 3 | RNVC: 2

23 Apr 2004

5120-14-218-8824

5120-14-322-1044

5120-14-245-8133
Cle Speciale

142458133
D23528A: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-225-4007

5120-14-041-5120

5120-14-384-7528
Electrical Card Extractor

143847528
NO PRIMARY REF14-384-7528: RNCC: 3 | RNVC: 2
16931925: RNCC: 5 | RNVC: 9

2 Jun 1983

5120-14-352-8429
Spanner Wrench

143528429
M31-118: RNCC: 3 | RNVC: 2
M31-118: RNCC: 5 | RNVC: 9

14 Nov 1978

5120-14-385-3490
Bearing And Bushing Inserter

143853490
6810J32-1671-00: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-031-9653
Verif Debat V Outil

140319653
M31-106: RNCC: 3 | RNVC: 2

5 Jul 1980

5120-14-459-1585
Bearing Staking Installation Tool

144591585
45056055: RNCC: 3 | RNVC: 2
45056055: RNCC: 5 | RNVC: 9

19 Nov 1992

5120-14-545-9200
Face Spanner Wrench Socket

145459200
R46611: RNCC: 3 | RNVC: 2
R46611: RNCC: 5 | RNVC: 2

27 May 2005

5120-14-534-0859
Detent Handling Tool

145340859
712956: RNCC: 3 | RNVC: 2

12 Mar 2003

5120-14-315-1849
Mechanical Puller Attachment

143151849
0-51813-2: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-530-2087
Socket Head Screw Key

145302087
83SH.1/4: RNCC: 3 | RNVC: 2
3148511238684: RNCC: 5 | RNVC: 2

22 May 2002

5120-14-299-6410

5120-14-491-0275
Marteau

144910275
4756 006 908 045: RNCC: 3 | RNVC: 2
F300 0T 001 1080: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-480-0158
Hand Terminal Crimping Tool

144800158
IS0LEC2: RNCC: 3 | RNVC: 2

21 Feb 1996

5120-14-392-0852

5120-14-407-2052
Bearing And Bushing Inserter

144072052
101276: RNCC: 3 | RNVC: 2

12 Feb 1986

5120-14-495-1012
Cle

144951012
859079: RNCC: 3 | RNVC: 2
F300 0T 018 3578: RNCC: 6 | RNVC: 9

15 Oct 1997

5120-14-407-6243
Arbre De Dist Outil

144076243
26545931300: RNCC: 3 | RNVC: 2
265459313: RNCC: 5 | RNVC: 9

27 Feb 1986

5120-14-350-6857

5120-14-283-2393

5120-14-244-4137
Socket Wrench Socket

142444137
J-14: RNCC: 3 | RNVC: 2
J14: RNCC: 3 | RNVC: 2
3272670218215: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-501-0314
Socket Wrench Socket

145010314
K.41HA: RNCC: 3 | RNVC: 2
030027: RNCC: 5 | RNVC: 2
3148510300276: RNCC: 5 | RNVC: 2
K-41HA: RNCC: 5 | RNVC: 2
K41HA: RNCC: 5 | RNVC: 2
0715 141 41: RNCC: 5 | RNVC: 2
F300 0T 025 0613: RNCC: 6 | RNVC: 9

29 Oct 1997

5120-14-439-6139
Bearing And Bushing Inserter

144396139
6851K33-2100-00: RNCC: 3 | RNVC: 2

16 May 1990

5120-14-311-7463
Spanner Wrench

143117463
6800-1060: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-010-1014
Adjustable Wrench

140101014
8000033500: RNCC: 3 | RNVC: 2
8810007079: RNCC: 5 | RNVC: 2
8810007079-1: RNCC: 5 | RNVC: 2

1 Jan 1961

5120-14-385-9784
Spanner Wrench

143859784
0.411/60113: RNCC: 3 | RNVC: 2
0411-60113: RNCC: 5 | RNVC: 2

24 Aug 1983

5120-14-423-2326
Basculeur Cle Dyn

144232326
SP2085D-3-520: RNCC: 3 | RNVC: 2

14 Apr 1988

5120-14-366-4292
Orient Pince Vissee

143664292
A9101365: RNCC: 3 | RNVC: 2
A910-1365: RNCC: 5 | RNVC: 2

20 Nov 1980

5120-14-423-2238
Poussoir

144232238
0747138: RNCC: 3 | RNVC: 2
SP.1734 D-4: RNCC: 5 | RNVC: 2
SP1734D-4: RNCC: 5 | RNVC: 2

13 Apr 1988

5120-14-407-7507
Tas De Sertissage

144077507
GA46639: RNCC: 3 | RNVC: 2

3 Mar 1986

5120-14-488-3148
Flat Tip Screwdriver Set

144883148
AJ.3: RNCC: 3 | RNVC: 2
AJ3: RNCC: 5 | RNVC: 2
AJ.3: RNCC: 5 | RNVC: 2
0500454: RNCC: 5 | RNVC: 2
3148515004544: RNCC: 5 | RNVC: 2

30 Apr 1997

5120-14-368-3658
Abrasive Wheel Dresser Cutters

143683658
700992-1: RNCC: 3 | RNVC: 2
3272670295803: RNCC: 5 | RNVC: 2

20 Feb 1981

5120-14-455-4505
Obturat Cle Demont

144554505
0T2-5-41: RNCC: 3 | RNVC: 2
0T2-5-41: RNCC: 5 | RNVC: 9

21 May 1992

5120-14-548-5094
Socket Wrench Socket

145485094
M.50HA: RNCC: 3 | RNVC: 2
00.52.19.78: RNCC: 5 | RNVC: 2

24 Jan 2006

5120-14-229-3318
Ecrou Extracteur

142293318
885H5: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-343-1819
Pose Filet Rapp Nez

143431819
01500605032: RNCC: 3 | RNVC: 2
01556050021: RNCC: 5 | RNVC: 2
01500605032: RNCC: 5 | RNVC: 2

16 Jun 1977

5120-14-416-8991
Outil Dextraction

144168991
46AM099: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-239-8923
Guide Pour Tige De

142398923
60832MREP2: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-443-3549
Augmenteur

144433549
GS91: RNCC: 3 | RNVC: 2

19 Nov 1990

5120-14-232-6245

5120-14-318-2587
Craftsman's Tweezers

143182587
149.Y: RNCC: 3 | RNVC: 2
149Y: RNCC: 5 | RNVC: 2
3148511384008: RNCC: 5 | RNVC: 2
0232385T00: RNCC: 5 | RNVC: 2
108: RNCC: 5 | RNVC: 2
7160: RNCC: 5 | RNVC: 2
91463564: RNCC: 5 | RNVC: 2
0138400: RNCC: 5 | RNVC: 9
138400149Y: RNCC: 5 | RNVC: 9
85-691-5199: RNCC: 6 | RNVC: 9

1 Jan 1975

5120-14-220-8032

5120-14-272-8065

5120-14-365-8756
Open End Wrench

143658756
291709823: RNCC: 3 | RNVC: 2

8 Oct 1980

5120-14-417-3515
Cable Type Ratchet Lever Puller

144173515
L140RA: RNCC: 3 | RNVC: 2

6 Jul 1987

5120-14-523-0824
Pliers

145230824
8021945Q00: RNCC: 3 | RNVC: 2

20 Dec 2000

5120-14-230-2860
Flat Tip Screwdriver

142302860
AY5X150: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-508-8896
Electrical Contact Remover

145088896
46249411: RNCC: 3 | RNVC: 2
46249411: RNCC: 5 | RNVC: 9

6 Oct 1998

5120-14-383-1697
Socket Wrench Socket

143831697
8810191001: RNCC: 3 | RNVC: 2

17 Mar 1983

5120-14-545-7690
Socket Wrench Handle Bar

145457690
86D200: RNCC: 3 | RNVC: 2

12 May 2005

5120-14-551-1406
Socket Head Screw Key Set

145511406
89S.JP8: RNCC: 3 | RNVC: 2
3148515329753: RNCC: 3 | RNVC: 2
89S.JP8: RNCC: 5 | RNVC: 2

29 Aug 2006

5120-14-329-6346
De Centrage Obus

143296346
SMS231: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-376-7752
Etau Immobilisation

143767752
NO PRIMARY REF14-376-7752: RNCC: 3 | RNVC: 2
227287: RNCC: 5 | RNVC: 9

28 Apr 1982

5120-14-570-7250
Socket Wrench

145707250
94-SD17: RNCC: 3 | RNVC: 2

19 Jan 2012

5120-14-490-8643
Broche

144908643
4051 060 004 087: RNCC: 3 | RNVC: 2
F300 0T 000 4880: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-490-8984
Trousse

144908984
4068 294 000 507: RNCC: 3 | RNVC: 2
F300 0T 000 5278: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-252-5614
Socket Wrench Socket

142525614
R8: RNCC: 3 | RNVC: 2
9970-115-320: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-530-5328
Socket Wrench Screwdriver Attachment

145305328
JX.30: RNCC: 3 | RNVC: 2

18 Jun 2002

5120-14-491-0227
Recepte

144910227
4602 012 100 014: RNCC: 3 | RNVC: 2
F300 0T 001 1023: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-378-2696
Pliers

143782696
E73-141BECL0NG160-IS0LE: RNCC: 2 | RNVC: 2
257-16P0-PVC: RNCC: 3 | RNVC: 2

20 Jul 1982

5120-14-207-5223
Abrasive Wheel Dresser Cutters

142075223
NO PRIMARY REF14-207-5223: RNCC: 3 | RNVC: 2
903: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-492-7333
Cliquet

144927333
NO PRIMARY REF14-492-7333: RNCC: 3 | RNVC: 2
1223A225: RNCC: 5 | RNVC: 9
F300 0T 008 6856: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-422-6742
Barre A Virer

144226742
NO PRIMARY REF14-422-6742: RNCC: 3 | RNVC: 2
1364606: RNCC: 5 | RNVC: 9

15 Mar 1988

5120-14-344-4067
Tournevis Manche

143444067
23002652-3: RNCC: 3 | RNVC: 2
23002652: RNCC: 5 | RNVC: 2
3599156: RNCC: 5 | RNVC: 2

10 Aug 1977

5120-14-338-4774
Faux Mor Demi-Coqui

143384774
PR47587-1: RNCC: 3 | RNVC: 2

6 Nov 1976

5120-14-483-0716
Open End Wrench

144830716
18.1/2: RNCC: 3 | RNVC: 2
3148510933894: RNCC: 5 | RNVC: 2
093389: RNCC: 5 | RNVC: 9
0093389: RNCC: 5 | RNVC: 9

8 Aug 1996

5120-14-476-3262
Socket Wrench Socket

144763262
S.12LA: RNCC: 3 | RNVC: 2
235-4220: RNCC: 5 | RNVC: 2
0055305: RNCC: 5 | RNVC: 9
FACOMS.12LA: RNCC: 5 | RNVC: 9

7 Jun 1995

5120-14-243-6148

5120-14-491-0137
Cle

144910137
4602 007 200 070: RNCC: 3 | RNVC: 2
F300 0T 001 0923: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-307-2760

5120-14-466-8777

5120-14-490-6985
Vise

144906985
241 V 00106 000: RNCC: 3 | RNVC: 2
F300 0T 000 1163: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-524-0576
Bearing And Bushing Inserter

145240576
CAS2394: RNCC: 3 | RNVC: 2

22 Feb 2001

5120-14-329-9309
Screwdriver Bit

143299309
AAM.4: RNCC: 3 | RNVC: 2
3148510023403: RNCC: 5 | RNVC: 2
AAM4: RNCC: 5 | RNVC: 2
0002340: RNCC: 5 | RNVC: 9

2 Jul 1975

5120-14-544-5196
Socket Wrench Socket

145445196
K.1'B: RNCC: 3 | RNVC: 2

8 Feb 2005

5120-14-532-3263
Screwdriver Bit

145323263
ES.606,5: RNCC: 3 | RNVC: 2
3148510248349: RNCC: 5 | RNVC: 2

30 Oct 2002

5120-14-528-8022
Hand Terminal Crimping Tool

145288022
453.6: RNCC: 3 | RNVC: 2
SYQ0814: RNCC: 5 | RNVC: 2
3148511767962: RNCC: 5 | RNVC: 2
0176796: RNCC: 5 | RNVC: 9

15 Feb 2002

5120-14-452-1293
Bearing And Bushing Remover

144521293
45057777: RNCC: 3 | RNVC: 2
45057777: RNCC: 5 | RNVC: 9

18 Dec 1991

5120-14-422-9279
Speciale Cle

144229279
0503-300400: RNCC: 3 | RNVC: 2

24 Mar 1988

5120-14-433-6096
Socket Wrench Handle

144336096
R.120: RNCC: 3 | RNVC: 2
0134490L00: RNCC: 5 | RNVC: 2
3148510519005: RNCC: 5 | RNVC: 2
250-5844: RNCC: 5 | RNVC: 2
91253293: RNCC: 5 | RNVC: 2
R.120: RNCC: 5 | RNVC: 2
0051900: RNCC: 5 | RNVC: 2
FACOMR.120: RNCC: 5 | RNVC: 9

2 Aug 1989

5120-14-394-9242
Plateau Alveole

143949242
29740948: RNCC: 3 | RNVC: 2

2 Oct 1984

5120-14-352-2744

5120-14-523-1337
Adaptateur Outil

145231337
317-50034: RNCC: 3 | RNVC: 2

8 Jan 2001

5120-14-272-3742

5120-14-416-7535
Support Socle

144167535
537353: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-572-0177
Mechanical Puller

145720177
TM2308G002: RNCC: 3 | RNVC: 2

1 Jun 2012

5120-14-567-8871
Nutdriver

145678871
001901 001 00: RNCC: 3 | RNVC: 2

20 Apr 2011

5120-14-560-0235
Combination Box And Open End Wrench

145600235
440.13: RNCC: 3 | RNVC: 2
3148517680012: RNCC: 5 | RNVC: 2
0768001: RNCC: 5 | RNVC: 9
768001: RNCC: 5 | RNVC: 9

16 Mar 2009

5120-14-262-2679

5120-14-219-1473
Cle Double Combinee

142191473
NO PRIMARY REF14-219-1473: RNCC: 3 | RNVC: 2
4268: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-455-0190
De Montage Arbre

144550190
100A500068: RNCC: 3 | RNVC: 2
FH152-933: RNCC: 5 | RNVC: 2

1 May 1992

5120-14-488-3028
Craftsman's Tweezers

144883028
140.AAW13: RNCC: 3 | RNVC: 2
0137510: RNCC: 5 | RNVC: 2
140AAW13: RNCC: 5 | RNVC: 2
3148511375105: RNCC: 5 | RNVC: 2

29 Apr 1997

5120-14-416-3394
Outil Pour Accroche

144163394
TIGEFILETEEM2X40: RNCC: 3 | RNVC: 2

3 Jun 1987

5120-14-225-4002

5120-14-240-4788

5120-14-317-0466
Pose Garniture Pref

143170466
RT5807: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-324-6911

5120-14-226-0002

5120-14-432-3872
Outillage Mandrin

144323872
547982: RNCC: 3 | RNVC: 2
00547982: RNCC: 5 | RNVC: 2

7 Jun 1989

5120-14-393-3044
Socket Head Screw Key

143933044
5-1881D43127-098: RNCC: 3 | RNVC: 2
K0385-9011153: RNCC: 3 | RNVC: 2
K0385-050INAF: RNCC: 5 | RNVC: 2

7 Apr 1984

5120-14-501-0113
Desaxeur Bpv

145010113
10329436: RNCC: 3 | RNVC: 2
F300 0T 025 0408: RNCC: 6 | RNVC: 9

29 Oct 1997

5120-14-230-6532
Spanner Wrench

142306532
42556: RNCC: 3 | RNVC: 2
42556B: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-214-3142

5120-14-571-7348
Screwdriver Bit

145717348
NEV-3-2: RNCC: 3 | RNVC: 2

26 Apr 2012

5120-14-530-8700
Screwdriver Bit

145308700
ES.001,8: RNCC: 3 | RNVC: 2
1083545R00: RNCC: 5 | RNVC: 2

9 Jul 2002

5120-14-274-8499
Stud Inserter And Remover

142748499
4202-3: RNCC: 3 | RNVC: 9

1 Jan 1971

5120-14-375-8080
Socle De Blocage

143758080
16380873: RNCC: 3 | RNVC: 2
16380873: RNCC: 5 | RNVC: 9

30 Mar 1982

5120-14-531-8840
Bearing And Bushing Inserter And Remover

145318840
T623G3004101: RNCC: 3 | RNVC: 2

25 Sep 2002

5120-14-240-4187

5120-14-470-6204
Cable Electr. Guide

144706204
1074730S00: RNCC: 3 | RNVC: 2

29 Jun 1994

5120-14-436-0300
Preformed Packing Inserter

144360300
RT32493: RNCC: 3 | RNVC: 2

29 Nov 1989

5120-14-416-7485
Reglage Simbleau

144167485
537062: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-490-8815
Alene

144908815
4066 214 220 100: RNCC: 3 | RNVC: 2
F300 0T 000 5087: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-521-0652
Socket Head Screw Key

145210652
10520932: RNCC: 3 | RNVC: 2

5 Jul 2000

5120-14-280-0783
Spanner Wrench

142800783
0860-78: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-217-9944
Torque Wrench Adapter

142179944
0D08: RNCC: 3 | RNVC: 2
0D08: RNCC: 5 | RNVC: 2

1 Jan 1965

5120-14-484-9323
Bearing And Bushing Inserter

144849323
8819552000: RNCC: 3 | RNVC: 2
F300 0T 023 1005: RNCC: 5 | RNVC: 9

12 Dec 1996

5120-14-427-0738
Screwdriver Bit

144270738
EBNA.105: RNCC: 3 | RNVC: 2
EBNA.105: RNCC: 5 | RNVC: 2
3148510222950: RNCC: 5 | RNVC: 2
EBNA105: RNCC: 5 | RNVC: 2
0228645Y00: RNCC: 5 | RNVC: 2
91711175: RNCC: 5 | RNVC: 2
0022295: RNCC: 5 | RNVC: 9

6 Oct 1988

5120-14-391-6471
Open End Wrench

143916471
44-6X7CP: RNCC: 3 | RNVC: 2

21 Mar 1984

5120-14-291-8164
Socket Wrench Socket

142918164
NK35: RNCC: 3 | RNVC: 2
3148510366609: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-317-4917
Hand Terminal Crimping Tool

143174917
450Z1: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-325-3439

5120-14-248-1071
Cle A Ergots Specia

142481071
NO PRIMARY REF14-248-1071: RNCC: 3 | RNVC: 2
32730: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-283-1307
Spanner Wrench

142831307
T0120BBF5APL5REP4A: RNCC: 3 | RNVC: 9
301702REP4A: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-529-8678
Socket Wrench Socket Set

145298678
JL.40U: RNCC: 3 | RNVC: 2
3148515056154: RNCC: 5 | RNVC: 2

17 Apr 2002

5120-14-521-5312
Socket Wrench Socket

145215312
NKB.36: RNCC: 3 | RNVC: 2
NKB36: RNCC: 5 | RNVC: 2

9 Aug 2000

5120-14-300-5315

5120-14-277-8307

5120-14-241-0275
Cle Speciale Demont

142410275
202491: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-325-3882
Rodoir Siege Clapet

143253882
PT762-4B: RNCC: 3 | RNVC: 2
PT762REP4: RNCC: 5 | RNVC: 9

2 Jul 1975

5120-14-232-7192
Hand Terminal Crimping Tool

142327192
59254: RNCC: 3 | RNVC: 2
59254-8: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-348-3833
Open End Wrench

143483833
D47573: RNCC: 3 | RNVC: 2

29 Mar 1978

5120-14-436-0203
Preformed Packing Inserter

144360203
568717: RNCC: 3 | RNVC: 2

29 Nov 1989

5120-14-545-9174
Socket Head Screw Key

145459174
61369517: RNCC: 3 | RNVC: 2

27 May 2005

5120-14-503-4769
Electronic Component Inserter And Remover

145034769
45240344: RNCC: 3 | RNVC: 2

14 Jan 1998

5120-14-514-3526
Spanner Wrench

145143526
8816082001: RNCC: 3 | RNVC: 2

12 May 1999

5120-14-433-6104
Bearing And Bushing Inserter And Remover

144336104
8815402000: RNCC: 3 | RNVC: 2
89415034: RNCC: 5 | RNVC: 2

2 Aug 1989

5120-14-222-7156

5120-14-271-6100

5120-14-427-0810
Outillage Mandrin

144270810
536710: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-343-1045
Screw Thread Insert Inserter

143431045
01500416000: RNCC: 3 | RNVC: 2
32071650: RNCC: 5 | RNVC: 2

16 Jun 1977

5120-14-348-0793
Socket Head Screw Key

143480793
510431: RNCC: 3 | RNVC: 2

29 Mar 1978

5120-14-348-9986
Jet Dextracteur

143489986
3160S95-66-040: RNCC: 3 | RNVC: 2
85-688-8471: RNCC: 6 | RNVC: 9

19 Apr 1978

5120-14-217-2716
Biellette Antenne

142172716
MS509-30: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-221-9590

5120-14-362-7535

5120-14-280-4146

5120-14-245-1795
Joint Chargeur

142451795
G1-15-008: RNCC: 3 | RNVC: 2
G1-15-008: RNCC: 5 | RNVC: 2
G1-15008: RNCC: 5 | RNVC: 2
G1-15008: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-241-6083
Mandrin De Preserti

142416083
FF14X16MI: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-040-1090

5120-14-271-0719

5120-14-436-0176
Emmanche-Roulements

144360176
RT19917: RNCC: 3 | RNVC: 2

29 Nov 1989

5120-14-570-2282
Bearing And Bushing Inserter

145702282
UFA31548: RNCC: 3 | RNVC: 2

30 Nov 2011

5120-14-548-8253
Screw Push-Pull Jack

145488253
3115ORGIL: RNCC: 3 | RNVC: 2

15 Feb 2006

5120-14-288-6888

5120-14-413-4850
Sheet Metalworking Dolly Block

144134850
906: RNCC: 3 | RNVC: 2
3148512131809: RNCC: 5 | RNVC: 2
2695 470 23: RNCC: 5 | RNVC: 2
0213180: RNCC: 5 | RNVC: 9

17 Dec 1986

5120-14-327-6995
Spanner Wrench

143276995
16394344: RNCC: 3 | RNVC: 2
16394344: RNCC: 5 | RNVC: 9

2 Jul 1975

5120-14-399-0110
Spanner Wrench

143990110
M10151: RNCC: 3 | RNVC: 2

6 Mar 1985

5120-14-316-6645

5120-14-261-5280
Tete Cle A Fourche

142615280
D12: RNCC: 3 | RNVC: 2
3272670215139: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-249-9373

5120-14-553-7320
Regulator Spring Adjusting Tool

145537320
20550200: RNCC: 3 | RNVC: 2

15 May 2007

5120-14-352-3171
Outil De Serrage

143523171
MGL288-28: RNCC: 3 | RNVC: 2
MGL288-28: RNCC: 5 | RNVC: 2

16 Oct 1978

5120-14-449-1822
Screwdriver Bit

144491822
0024647: RNCC: 3 | RNVC: 2
ES188: RNCC: 5 | RNVC: 2
ES.188: RNCC: 5 | RNVC: 2
024647: RNCC: 5 | RNVC: 9

2 Aug 1991

5120-14-358-3619
Open End Wrench

143583619
522CM10X11: RNCC: 3 | RNVC: 9
DEM522CM10X11: RNCC: 5 | RNVC: 9

13 Aug 1979

5120-14-040-4689
Spanner Wrench

140404689
23986: RNCC: 3 | RNVC: 2
23986: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-512-5608
Spanner Wrench

145125608
94AM33: RNCC: 3 | RNVC: 2

17 Feb 1999

5120-14-200-4158
Spanner Wrench

142004158
E74323A45NW: RNCC: 2 | RNVC: 2

1 Jan 1962

5120-14-420-8692
Socket Wrench Socket

144208692
96162606: RNCC: 3 | RNVC: 2
96162606: RNCC: 5 | RNVC: 9

22 Dec 1987

5120-14-543-6372
Socket Head Screw Key Set

145436372
89R.JP6: RNCC: 3 | RNVC: 2

27 Nov 2004

5120-14-474-0634
Cle A Ergots

5120-14-221-7165

5120-14-343-1816
Pose Filet Rapp Nez

143431816
01500610332: RNCC: 3 | RNVC: 2
01556103021: RNCC: 5 | RNVC: 2
01500610332: RNCC: 5 | RNVC: 2

16 Jun 1977

5120-14-273-6989

5120-14-561-3007
Face Spanner Wrench Socket

145613007
98F55109001000: RNCC: 3 | RNVC: 2

2 Jul 2009

5120-14-459-1658
Bearing And Bushing Remover

144591658
45215409: RNCC: 3 | RNVC: 2
45215409: RNCC: 5 | RNVC: 9

19 Nov 1992

5120-14-544-1376
Bearing And Bushing Remover

145441376
27981270Z: RNCC: 3 | RNVC: 2

5 Jan 2005

5120-14-294-6534
Open End Wrench

142946534
02640030000: RNCC: 3 | RNVC: 2
026400300: RNCC: 5 | RNVC: 2
204795: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-316-5022
Spanner Wrench

143165022
0U50146: RNCC: 3 | RNVC: 2
50146: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-329-3273
Positionneur Roulem

143293273
14369-5011: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-393-3040
Tournevis

143933040
5-1881D43127-123: RNCC: 3 | RNVC: 2
K0385-9010386: RNCC: 3 | RNVC: 2
K0385-2P50INXP12: RNCC: 5 | RNVC: 2

7 Apr 1984

5120-14-403-8961
Open End Wrench

144038961
232320: RNCC: 3 | RNVC: 2

11 Sep 1985

5120-14-409-5464

5120-14-333-7344

5120-14-556-1567
Socket Wrench Socket

145561567
MT23241312: RNCC: 3 | RNVC: 2

6 Feb 2008

5120-14-421-6319
Bague Guide

144216319
216870: RNCC: 3 | RNVC: 2

20 Jan 1988

5120-14-369-0914
Extracteur Griffes

143690914
90890-06035: RNCC: 3 | RNVC: 2

17 Apr 1981

5120-14-420-9552
Hand Tube Belling Punch

144209552
NO PRIMARY REF14-420-9552: RNCC: 3 | RNVC: 2
243.A1/4: RNCC: 5 | RNVC: 2

6 Jan 1988

5120-14-451-2679
Face Spanner Wrench Socket

144512679
MHJ081-21: RNCC: 3 | RNVC: 2
MHJ081-21: RNCC: 5 | RNVC: 2

6 Nov 1991

5120-14-543-9937
Ball Joint Removal Tool

145439937
5000262429: RNCC: 3 | RNVC: 2

21 Dec 2004

5120-14-377-1839
Face Spanner Wrench Socket

143771839
225821: RNCC: 3 | RNVC: 2
00059980: RNCC: 5 | RNVC: 2
059980: RNCC: 5 | RNVC: 2

17 May 1982

5120-14-385-9670
Spanner Wrench

143859670
139540Y: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-439-2020
Mechanical Puller Attachment

144392020
16741070: RNCC: 3 | RNVC: 2

25 Apr 1990

5120-14-531-6732
Adjustable Wrench

145316732
113.6CG: RNCC: 3 | RNVC: 2
113,6CG: RNCC: 5 | RNVC: 2

11 Sep 2002

5120-14-439-2004
Spanner Wrench

144392004
16349440: RNCC: 3 | RNVC: 2

25 Apr 1990

5120-14-490-6979
Shears

144906979
241 S 02811 075: RNCC: 3 | RNVC: 2
F300 0T 000 1150: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-375-3661
Hand Screw Starter

143753661
AFEX2: RNCC: 3 | RNVC: 2
3148510050928: RNCC: 5 | RNVC: 2
244-092: RNCC: 5 | RNVC: 2
FACOMAFEX2: RNCC: 5 | RNVC: 9

26 Feb 1982

5120-14-454-9592
Six Point Tip Screwdriver

144549592
AEX.7X35: RNCC: 3 | RNVC: 2
0613 463 03: RNCC: 5 | RNVC: 2
3148510049700: RNCC: 5 | RNVC: 2
104-4203: RNCC: 5 | RNVC: 2
004970: RNCC: 5 | RNVC: 9
FACOMAEX.7X35: RNCC: 5 | RNVC: 9

29 Apr 1992

5120-14-432-7121
Spanner Wrench

144327121
NO PRIMARY REF14-432-7121: RNCC: 3 | RNVC: 2
OU138469: RNCC: 5 | RNVC: 9
0U138469: RNCC: 5 | RNVC: 9

21 Jun 1989

5120-14-469-9049
Open End Wrench

144699049
NO PRIMARY REF14-469-9049: RNCC: 3 | RNVC: 2
46.10VSE: RNCC: 5 | RNVC: 9
0105600: RNCC: 5 | RNVC: 9

18 May 1994

5120-14-240-4790
Manivelle Des Mecan

142404790
32522: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-316-6612

5120-14-220-8544
Cle Col De Cygne Sp

142208544
PR46521: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-371-5705
Entre Fixe Fourchet

143715705
9970-121-198: RNCC: 3 | RNVC: 2

5 Aug 1981

5120-14-344-8882

5120-14-490-9885
Marteau

144909885
4472 521 637 801: RNCC: 3 | RNVC: 2
F300 0T 000 8593: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-274-5176

5120-14-201-9698

5120-14-283-1302
Entretoise Dappui

142831302
T0120BBF4APL3: RNCC: 3 | RNVC: 2
403704T: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-558-6450
Mechanical Puller Attachment

145586450
82416506000: RNCC: 3 | RNVC: 2

21 Oct 2008

5120-14-444-8287
Cle De Serrage

144448287
0478-203290: RNCC: 3 | RNVC: 2

23 Jan 1991

5120-14-296-9401
Extracteur Plan Ide

142969401
3599077: RNCC: 3 | RNVC: 2
3599077: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-218-6722

5120-14-245-1815

5120-14-490-8915
Poincon

144908915
4067 240 000 598: RNCC: 3 | RNVC: 2
F300 0T 000 5191: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-321-2085

5120-14-476-4675
Bossage Posit Outil

144764675
132282: RNCC: 3 | RNVC: 2

14 Jun 1995

5120-14-233-4337
Cle Speciale

142334337
171-323: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-234-5336

5120-14-416-7657
Rondelle Dappui

144167657
540663: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-263-8212

5120-14-356-2231
Reglage Dispositif

143562231
200060312: RNCC: 3 | RNVC: 2
60312: RNCC: 5 | RNVC: 2

25 Apr 1979

5120-14-436-7596
Sertissage Outil

144367596
30AM153: RNCC: 3 | RNVC: 2

3 Jan 1990

5120-14-278-1807

5120-14-454-5323
Mechanical Puller Set

144545323
NO PRIMARY REF14-454-5323: RNCC: 3 | RNVC: 2
0524145: RNCC: 5 | RNVC: 2
U.102A: RNCC: 5 | RNVC: 2
U102A: RNCC: 5 | RNVC: 2
91676560: RNCC: 5 | RNVC: 2

2 Apr 1992

5120-14-483-1211
Socket Wrench Socket

144831211
J.9/16F: RNCC: 3 | RNVC: 2
3148510279084: RNCC: 5 | RNVC: 2
0027908: RNCC: 5 | RNVC: 9

9 Aug 1996

5120-14-386-4875
Guidage Cone

143864875
F46130: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-491-0187
Embout

144910187
4602 008 600 005: RNCC: 3 | RNVC: 2
F300 0T 001 0976: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-232-1675
Open End Wrench

142321675
13 3-4X15-16: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-465-4624
Socket Wrench Screwdriver Attachment

144654624
851-500-045-0: RNCC: 3 | RNVC: 2

30 Sep 1993

5120-14-346-0352
Flat Tip Screwdriver

143460352
253MG-1: RNCC: 3 | RNVC: 2
253MG1: RNCC: 3 | RNVC: 2
3272670289062: RNCC: 5 | RNVC: 2

5 Nov 1977

5120-14-489-3456
Hand Tube Swaging Tool Kit

144893456
853-600-299-0: RNCC: 3 | RNVC: 2

9 Jul 1997

5120-14-337-2010

5120-14-457-5497
Cle

144575497
37932: RNCC: 3 | RNVC: 2

10 Sep 1992

5120-14-477-1227
Ch Controle Calibre

144771227
10085478: RNCC: 3 | RNVC: 2

26 Jul 1995

5120-14-557-3603
Hand Beading Tool

145573603
14100033417: RNCC: 3 | RNVC: 2

4 Jun 2008

5120-14-400-3936
Swivel Knob Jeweler's Screwdriver Set

144003936
721: RNCC: 3 | RNVC: 9
DEM721: RNCC: 5 | RNVC: 9
85-692-8155: RNCC: 6 | RNVC: 9

24 Apr 1985

5120-14-217-2671

5120-14-424-8784
Bearing And Bushing Inserter And Remover

144248784
851-200-017-0: RNCC: 3 | RNVC: 2

9 Jun 1988

5120-14-285-5939

5120-14-406-6396
Joints Emmanche

144066396
OUT50362: RNCC: 3 | RNVC: 2
0UT50362: RNCC: 5 | RNVC: 2

8 Jan 1986

5120-14-526-1566
Bearing Staking Installation Tool

145261566
132313: RNCC: 3 | RNVC: 2

4 Jul 2001

5120-14-344-8883

5120-14-200-4426
Socket Wrench Socket

142004426
S.10: RNCC: 3 | RNVC: 2
S-10: RNCC: 3 | RNVC: 2
S10: RNCC: 3 | RNVC: 2
162-0251: RNCC: 5 | RNVC: 2
3148510535203: RNCC: 5 | RNVC: 2
S10: RNCC: 5 | RNVC: 2
3272670260146: RNCC: 5 | RNVC: 2
0712 133 110: RNCC: 5 | RNVC: 2
0053520: RNCC: 5 | RNVC: 9
FACOMS.10: RNCC: 5 | RNVC: 9

1 Jan 1962

5120-14-401-5638
Spanner Wrench

144015638
350A93-3804-00: RNCC: 3 | RNVC: 2
350A-93-3804-00: RNCC: 5 | RNVC: 2

13 Jun 1985

5120-14-368-0563
Plaque Levage Droit

143680563
24145002000: RNCC: 3 | RNVC: 2
241450020: RNCC: 5 | RNVC: 9

19 Jan 1981

5120-14-384-7617
Electrical Card Extractor

143847617
20198026: RNCC: 3 | RNVC: 2
20198026: RNCC: 5 | RNVC: 9

2 Jun 1983

5120-14-442-2393
Extracteur

144422393
D47370: RNCC: 3 | RNVC: 2

3 Oct 1990

5120-14-373-6769
Decolle Durit Outil

143736769
225775: RNCC: 3 | RNVC: 2

13 Nov 1981

5120-14-269-8862
Cle Serrage Ecrou

142698862
16930: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-468-9670
Rechange Pince Axe

144689670
170.SE: RNCC: 3 | RNVC: 2
3148511398609: RNCC: 5 | RNVC: 2
0139860: RNCC: 5 | RNVC: 9

30 Mar 1994

5120-14-322-9750

5120-14-221-8815

5120-14-217-2714

5120-14-365-6510
Screwdriver Bit

143656510
4-826003: RNCC: 3 | RNVC: 2
546-66: RNCC: 5 | RNVC: 2
600P3: RNCC: 5 | RNVC: 2
I480-3: RNCC: 5 | RNVC: 2

8 Oct 1980

5120-14-040-2930
Outil De Freinage

140402930
RT9674: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-329-1288
Socket Head Screw Key Set

143291288
08405-90: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-234-3345

5120-14-245-1772

5120-14-416-7595
Reglage Simbleau

144167595
523035: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-261-8997
Cle Speciale

142618997
H90P1006: RNCC: 3 | RNVC: 2
134176: RNCC: 5 | RNVC: 2
530508: RNCC: 5 | RNVC: 2
H90P1006: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-564-4804
Hand Hammer

145644804
1262H.150: RNCC: 3 | RNVC: 2
PNA00086B: RNCC: 5 | RNVC: 2

3 May 2010

5120-14-361-6802
Culbuteur Cle Regla

143616802
5000261182: RNCC: 3 | RNVC: 2
5000499573: RNCC: 5 | RNVC: 2
5000261182: RNCC: 5 | RNVC: 9
5000499573: RNCC: 5 | RNVC: 9

20 Feb 1980

5120-14-208-6291

5120-14-564-9481
Cross Tip Screwdriver

145649481
AND0X75: RNCC: 3 | RNVC: 2
773581: RNCC: 5 | RNVC: 2
FACOM AND0X75: RNCC: 5 | RNVC: 2

21 Jun 2010

5120-14-376-7167
Pou Embout A Rotule

143767167
0176-954016: RNCC: 3 | RNVC: 2
0176-954016-0: RNCC: 5 | RNVC: 2

28 Apr 1982

5120-14-406-6270
Stockage Plaque

144066270
853-201-956-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-393-5626
Spanner Wrench

143935626
MN7062RUF1/1-7062RBF1/3ET2/3: RNCC: 3 | RNVC: 9
MN7062RUF1-1-7062RBF1-3ET2-3: RNCC: 5 | RNVC: 9

7 Apr 1984

5120-14-479-0354
Bearing And Bushing Remover

144790354
888-373-400-1: RNCC: 3 | RNVC: 2

6 Dec 1995

5120-14-314-9104

5120-14-337-3928

5120-14-207-5012
Rallonge Pour Cle D

142075012
10-706133: RNCC: 3 | RNVC: 2

1 Jan 1964

5120-14-484-6535
Torque Wrench Adapter

144846535
10.7: RNCC: 3 | RNVC: 2
10.7: RNCC: 5 | RNVC: 2
1080387M00: RNCC: 5 | RNVC: 2
3148510925103: RNCC: 5 | RNVC: 2
0092510: RNCC: 5 | RNVC: 9

28 Nov 1996

5120-14-410-3434
Adaptation Controle

144103434
8813324000: RNCC: 3 | RNVC: 2

18 Jun 1986

5120-14-566-3066
Mechanical Puller

145663066
82557788000: RNCC: 3 | RNVC: 2

4 Nov 2010

5120-14-399-1107
Extracteur Injecteu

143991107
5000261205: RNCC: 3 | RNVC: 2

6 Mar 1985

5120-14-263-8168

5120-14-274-7931

5120-14-203-1432

5120-14-490-2011
Cambreur

144902011
CP0U6135: RNCC: 3 | RNVC: 2
5120AA2009696: RNCC: 6 | RNVC: 9

17 Sep 1997

5120-14-573-9583
Socket Wrench Socket Set

145739583
OM 2313: RNCC: 3 | RNVC: 2
OM2313: RNCC: 5 | RNVC: 2

23 Nov 2012

5120-14-266-7033

5120-14-565-6299
Socket Wrench Socket

145656299
885509: RNCC: 3 | RNVC: 2

9 Sep 2010

5120-14-564-6088
Socket Wrench Screwdriver Attachment

145646088
98F27808212000: RNCC: 3 | RNVC: 2

11 May 2010

5120-14-501-7742
Douille D'appui

145017742
1X56 136 504: RNCC: 3 | RNVC: 2
1X56 136 504: RNCC: 5 | RNVC: 2

7 Nov 1997

5120-14-527-9143
Socket Head Screw Key

145279143
888-485-800-1: RNCC: 3 | RNVC: 2
888-485-800-1: RNCC: 5 | RNVC: 2

28 Nov 2001

5120-14-213-3786
Cle Assemblage

142133786
NO PRIMARY REF14-213-3786: RNCC: 3 | RNVC: 2
1-1038-02-39: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-569-0335
Mechanical Puller

145690335
F27377000-1: RNCC: 3 | RNVC: 2
F27377000: RNCC: 3 | RNVC: 9
F27377000: RNCC: 5 | RNVC: 9

1 Aug 2011

5120-14-576-1327
Hand Shovel

145761327
ARVA SNOW ECO: RNCC: 3 | RNVC: 2

31 May 2013

5120-14-365-9053
Cle De Serrage

143659053
422964: RNCC: 3 | RNVC: 2

4 Nov 1980

5120-14-343-8353

5120-14-252-3364
Socket Wrench Socket

142523364
PR27269: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-352-7180
Connex Enroul Outil

143527180
633834: RNCC: 3 | RNVC: 2

14 Nov 1978

5120-14-477-1311
Hand Terminal Crimping Tool

144771311
0176790: RNCC: 3 | RNVC: 2
453: RNCC: 5 | RNVC: 2

26 Jul 1995

5120-14-265-9589
Matrice Pour Pince

142659589
300430-8: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-415-4414

5120-14-409-3016

5120-14-425-0963

5120-14-406-6391
Joints Emmanche

144066391
OUT50357: RNCC: 3 | RNVC: 2
0UT50357: RNCC: 5 | RNVC: 2

8 Jan 1986

5120-14-567-4590
Seal Inserter

145674590
TM0357G003: RNCC: 3 | RNVC: 2

17 Mar 2011

5120-14-491-0115
Caisse

144910115
4602 006 900 002: RNCC: 3 | RNVC: 2
F300 0T 001 0901: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-247-1265
Aiguille Speciale

142471265
CH17: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-221-8810

5120-14-438-4186

5120-14-417-4611
Centrage Broche

144174611
1724710: RNCC: 3 | RNVC: 9

8 Jul 1987

5120-14-416-7573
Speciale Cle

144167573
537419: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-275-1681
Cle A Tube Speciale

142751681
3CGF87: RNCC: 3 | RNVC: 2
3CGF87: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-491-0144
Cle

144910144
4602 007 200 077: RNCC: 3 | RNVC: 2
F300 0T 001 0930: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-490-6949
Hammer

144906949
241 H 00195 000: RNCC: 3 | RNVC: 2
F300 0T 000 1085: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-573-0498
Torque Wrench

145730498
62118171AA: RNCC: 3 | RNVC: 2

7 Sep 2012

5120-14-283-9728
Broche Equipee

142839728
MS687: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-403-8790
Outil Levag Ppe Inj

144038790
25545920700: RNCC: 3 | RNVC: 2
255459207: RNCC: 5 | RNVC: 9

28 Aug 1985

5120-14-042-6809

5120-14-286-7832

5120-14-245-8171

5120-14-348-4994
Spanner Wrench

143484994
8812459000: RNCC: 3 | RNVC: 2

29 Mar 1978

5120-14-421-2061
Open End Wrench

144212061
522CP46X50: RNCC: 3 | RNVC: 9
DEM522CP46X50: RNCC: 5 | RNVC: 9

6 Jan 1988

5120-14-205-8269

5120-14-232-3099

5120-14-438-1114
Handling Tool Arm

144381114
16-080-070: RNCC: 3 | RNVC: 2

7 Mar 1990

5120-14-357-7702
Optique Bec Daigle

143577702
0404-00303: RNCC: 3 | RNVC: 2
0421-00402: RNCC: 5 | RNVC: 2

20 Jul 1979

5120-14-420-9547
Pliers

144209547
186.8CPG: RNCC: 3 | RNVC: 2
3148511423851: RNCC: 5 | RNVC: 2
0142385: RNCC: 5 | RNVC: 9
186-8CPG: RNCC: 5 | RNVC: 9

6 Jan 1988

5120-14-490-8898
Grattoi

144908898
4067 180 000 474: RNCC: 3 | RNVC: 2
F300 0T 000 5171: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-497-8001
Pliers

144978001
599001: RNCC: 3 | RNVC: 2

20 Oct 1997

5120-14-567-1802
Socket Wrench Socket

145671802
GA.37A: RNCC: 3 | RNVC: 2

18 Feb 2011

5120-14-202-5994

5120-14-303-6272

5120-14-556-5361
Screw Extractor

145565361
7M910 A6: RNCC: 3 | RNVC: 2

19 Mar 2008

5120-14-349-0297

5120-14-266-7016

5120-14-225-4051

5120-14-397-4845
Outil De Cambrage

143974845
73011000: RNCC: 3 | RNVC: 2

14 Dec 1984

5120-14-399-3314
Montage Cone

143993314
100-491: RNCC: 3 | RNVC: 2
100491: RNCC: 5 | RNVC: 2

6 Mar 1985

5120-14-279-4340
Cle

142794340
NO PRIMARY REF14-279-4340: RNCC: 3 | RNVC: 2
19299740: RNCC: 5 | RNVC: 2
19299740: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-303-6426
Torque Wrench Adapter

143036426
D0-12: RNCC: 3 | RNVC: 2
D012: RNCC: 3 | RNVC: 2
3272670215283: RNCC: 5 | RNVC: 2
D012: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-383-0902
Pulverisation Rampe

143830902
9970-121-254: RNCC: 3 | RNVC: 2

17 Mar 1983

5120-14-285-1223
Regleur Clapet

142851223
C46038: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-352-2578

5120-14-212-3801

5120-14-459-1641
Bearing Staking Installation Tool

144591641
45215131: RNCC: 3 | RNVC: 2
45215131: RNCC: 5 | RNVC: 9

19 Nov 1992

5120-14-541-3712
Socket Wrench Screwdriver Attachment Set

145413712
31534: RNCC: 3 | RNVC: 2

3 Jun 2004

5120-14-438-2593
Screwdriver Bit

144382593
END.203: RNCC: 3 | RNVC: 2
3148510238937: RNCC: 5 | RNVC: 2
0023893: RNCC: 5 | RNVC: 9

12 Mar 1990

5120-14-522-8876
Socket Wrench Socket Set

145228876
46007935: RNCC: 3 | RNVC: 2
8023919N00: RNCC: 5 | RNVC: 2
46007935: RNCC: 5 | RNVC: 2

6 Dec 2000

5120-14-345-3099
Spanner Wrench

143453099
055W02-519848L: RNCC: 3 | RNVC: 2
7M147J: RNCC: 3 | RNVC: 2
0519848L00: RNCC: 5 | RNVC: 2

5 Oct 1977

5120-14-566-7015
Screw Thread Insert Inserter

145667015
05141: RNCC: 3 | RNVC: 2
71510000004: RNCC: 5 | RNVC: 2

8 Dec 2010

5120-14-362-5056
Support De Jante

143625056
003006035M: RNCC: 3 | RNVC: 2

19 Mar 1980

5120-14-432-7182
Plastique Jet

144327182
OUT50102: RNCC: 3 | RNVC: 2
0UT50102: RNCC: 5 | RNVC: 2

21 Jun 1989

5120-14-245-3594
Cle Pour Salinometr

142453594
A57755: RNCC: 3 | RNVC: 2
A57755: RNCC: 3 | RNVC: 2
MS850A: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-492-5442
Cle

144925442
5000918871: RNCC: 3 | RNVC: 2
F300 0T 007 9257: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-245-5004
Bague De Montage De

142455004
50576: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-555-2074
Pliers

145552074
DM.33: RNCC: 3 | RNVC: 2
3148510199856: RNCC: 5 | RNVC: 2

10 Oct 2007

5120-14-330-3694
Montage Bag Manchon

143303694
199908: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-407-8408
Adapt.Verin

144078408
4A421W26HSC1: RNCC: 3 | RNVC: 2
4A-421-W26H-SC1: RNCC: 5 | RNVC: 2
85-692-5183: RNCC: 6 | RNVC: 9

5 Mar 1986

5120-14-453-1004
Outil Serrage Ecrou

144531004
90890-06079: RNCC: 3 | RNVC: 2

5 Feb 1992

5120-14-216-4095
Cle Speciale

142164095
M3-009: RNCC: 3 | RNVC: 2
M3-009: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-506-2473
Combination Box And Open End Wrench Set

145062473
40R.JE9: RNCC: 3 | RNVC: 2
3148515282454: RNCC: 5 | RNVC: 2
216-6073: RNCC: 5 | RNVC: 2
FACOM40R.JE9: RNCC: 5 | RNVC: 9

15 Apr 1998

5120-14-513-2658
Mechanical Puller Attachment

145132658
NO PRIMARY REF14-513-2658: RNCC: 3 | RNVC: 2
NNP 2950860083263: RNCC: 5 | RNVC: 9

10 Mar 1999

5120-14-276-1963
Fixed Open End Wrench Set

142761963
34.JT8: RNCC: 3 | RNVC: 2
34.JT8: RNCC: 5 | RNVC: 2
34JT8: RNCC: 5 | RNVC: 2
146-8M: RNCC: 5 | RNVC: 2
3148510987002: RNCC: 5 | RNVC: 2
0098700: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-271-6247
Spanner Wrench

142716247
E74323A60AGW: RNCC: 2 | RNVC: 2

1 Jan 1970

5120-14-405-5896
Torque Wrench Adapter

144055896
GTP1224: RNCC: 3 | RNVC: 2
GTP1224: RNCC: 3 | RNVC: 2
GTP 1224: RNCC: 5 | RNVC: 9

4 Dec 1985

5120-14-532-2430
Adjustable Wrench

145322430
54G10: RNCC: 3 | RNVC: 2

23 Oct 2002

5120-14-403-7170
Socket Head Screw Key Set

144037170
525293: RNCC: 3 | RNVC: 2

21 Aug 1985

5120-14-401-3214
Spanner Wrench

144013214
0UT99: RNCC: 3 | RNVC: 2

5 Jun 1985

5120-14-431-7786
Spanner Wrench

144317786
0411-60123: RNCC: 3 | RNVC: 2

10 May 1989

5120-14-253-5839

5120-14-220-9214
Socket Wrench Handle

142209214
J-140: RNCC: 3 | RNVC: 2
3272670231399: RNCC: 5 | RNVC: 2
J140: RNCC: 5 | RNVC: 2
74J140: RNCC: 5 | RNVC: 9
85-679-5920: RNCC: 6 | RNVC: 9

1 Jan 1965

5120-14-531-4930
Screwdriver Bit Holder

145314930
REF6,5: RNCC: 3 | RNVC: 2

21 Aug 2002

5120-14-481-8896
Adjustable Wrench

144818896
10319337: RNCC: 3 | RNVC: 2

6 Jun 1996

Load More Results