What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.

A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Blacksmith's Punch?

A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Mechanical Finger?

A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.

A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Screwdriver And Wrench Assembly?

A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Stakeholder Bench Plate?

A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.

What is a Drill Drift?

A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.

A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Digging Bar?

A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

What is a Valve Spring Lifter?

A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.

What is a Fuse Puller?

A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.

Hand Tools, Nonedged, Nonpowered - France (FR)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by France (FR) - NCB is 14

Page 47 of 110

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by France

51	20	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - France (FR)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 16 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Pipe Vise? 19 Items: A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.
What is a Hand Vise? 25 Items: A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.
What is a Hand Hydraulic Jack? 133 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 153 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 903 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 17 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
Swage,Bottom,Blacksmith's 10 Items
What is a Hand Tube Flaring Tool? 23 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Blacksmith's Punch? 12 Items: A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.
What is a Drain Plug Wrench? 45 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 57 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 16 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 3829 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
Flatter,Blacksmith's 18 Items
Swage,Top,Blacksmith's 12 Items
What is a Pipe Wrench? 110 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 149 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 53 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
Screwdriver,Offset 54 Items
What is a Screwdriver Bit? 707 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Mechanical Finger? 25 Items: A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.
What is a Socket Wrench Socket? 1803 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 1412 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 1641 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 52 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 565 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
Jack,Push-Pull,Screw 30 Items
What is a Hand Tube Bender? 54 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 1106 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 55 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pinch Bar? 19 Items: A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.
What is a Pry Bar? 17 Items: A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.
What is a Wrecking Bar? 15 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 273 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 413 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 32 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 295 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
Face,Hammer,Inserted 25 Items
What is a Hole Sheet Metal Holder? 37 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Screwdriver And Wrench Assembly? 11 Items: A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.
What is a Hand Rivet Set? 121 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Stakeholder Bench Plate? 22 Items: A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.
What is a Drill Drift? 32 Items: A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.
What is a Tack Claw? 15 Items: A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.
Mattock 28 Items
What is a Socket Wrench Handle Bar? 108 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Stake,Sheet Metalworking 50 Items
Riveter,Blind,Hand 76 Items
What is a Hand Shovel? 43 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 98 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 30 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
What is a Digging Bar? 20 Items: A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.
Block,Dolly,Sheet Metalworking 56 Items
What is a Piston Ring Compressor? 34 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Valve Spring Lifter? 29 Items: A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.
What is a Fuse Puller? 20 Items: A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.
What is a Hand Lead Seal Press? 18 Items: A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.
What is a Hand Beading Tool? 91 Items: A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.
What is a Hand Hammer? 502 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
Head,Hand Hammer 81 Items
What is a Lamp Extractor? 76 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Tube Packing Ring Installing Tool? 29 Items: A Tube Packing Ring Installing Tool (INSTALLING TOOL,TUBE PACKING RING) is an item designed to insert packing rings on tubes within tube sheets on condensers and similar heat exchangers. In operation, the packing rings are assembled on the loading pin mandrel and are then transferred from the mandrel on to the tube by means of a tubular sleeve which slides on the mandrel.
What is a Carpenters' Pincers? 18 Items: A Carpenters' Pincers (PINCERS,CARPENTERS') is a plierlike hand tool having two opposing jaws which may have hammerlike backs. One handle has a nail or tack pulling claw, the other is shaped to form a screwdriver. The tool may contain a wire cutter. See also NIPPERS, END CUTTING and PINCERS, FARRIERS'.
What is a Trowel? 33 Items: A Trowel is a tool used for bricklaying, concrete work, plastering, linoleum laying, and masonry work. Excludes CORNER TOOL, CONCRETE.
What is a Hand Abrasive Wheel Dresser? 12 Items: A Hand Abrasive Wheel Dresser (DRESSER,ABRASIVE WHEEL,HAND) is a tool designed to remove glaze from, dress, shape, sharpen, and true solid abrasive wheels. Excludes NIB, DIAMOND, WHEEL DRESSING.
What is a Lamp Cap Extractor? 32 Items: A Lamp Cap Extractor (EXTRACTOR,LAMP CAP) is a tool specifically designed to facilitate the removal of lamp caps from switchboards, panels or indicator lamps.
What is a Rivet Bucking Bar? 51 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 86 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 277 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Woven Cable Grip? 23 Items: A Woven Cable Grip (GRIP,CABLE,WOVEN) is a braided wire device designed to clutch a bare or insulated conductor, cable or wire rope, for holding taut or drawing through conduit.
What is a Screw Thread Insert Extractor? 19 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is an Electron Tube Extractor? 18 Items: An Electron Tube Extractor (EXTRACTOR,ELECTRON TUBE) is a hand tool designed to facilitate the removal of electron tubes from electronic equipment and to avoid burning the fingers. It may be used for installing tubes.
What is a Cross Tip Screwdriver? 362 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 21 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 11 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 37 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Tool Handle Wedge? 10 Items: A Tool Handle Wedge (WEDGE,TOOL HANDLE) is excludes WEDGE, WOOD.
What is a Marlinespike? 16 Items: A Marlinespike is a metal hand tool made in the shape of a tapered pin. One end is pointed and the opposite end may be headed. The body may contain an eye for a lanyard sling, or be grooved lengthwise. Excludes CABLE PICK and FID.
What is an Aligning Punch? 272 Items: An Aligning Punch (PUNCH,ALIGNING) is a round, square, hexagonal or octagonal bodied hand tool, having a round tapered section 6-1/2 inches (165.1 mm) or more in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, DRIFT and DRIFTPIN.
What is a Drift Punch? 25 Items: A Drift Punch (PUNCH,DRIFT) is a round, square, hexagonal, or octagonal bodied hand tool, having a round tapered section 4 to 6 inches (101.6 mm to 152.4 mm) inclusive in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, ALIGNING; and DRIFTPIN.
What is a Putty Knife? 36 Items: A Putty Knife (KNIFE,PUTTY) is a hand tool with a nonedged blade fixed to a handle for laying on and smoothing putty and the like.
What is a Socket Wrench Adapter-Extension? 40 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 30 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 184 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Socket Wrench Ratchet Attachment? 47 Items: A Socket Wrench Ratchet Attachment (RATCHET ATTACHMENT,SOCKET WRENCH) is a connection for socket wrenches and handles. Consists of a ratcheting mechanism with an internal drive on one end and an external drive on the opposite end of the same size. The item is designed to permit continuous rotation of the socket in one direction without removing the socket or handle and without a complete rotation of the handle.
What is a Wrench Extension Handle? 81 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Socket Wrench Crowfoot Attachment? 155 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 33 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 43 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 48 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 2394 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 372 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 300 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 661 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 32 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand-Operated Grommet And Eyelet Press? 12 Items: A Hand-Operated Grommet And Eyelet Press (PRESS,GROMMET AND EYELET,HAND-OPERATED) is a device which punches or pierces holes and in addition fastens or sets eyelets and grommets in cloth, paper and similar material. May be used for fastening or setting rivets, lacing hooks and snaps in cloth, paper and similar material. It is hand operated by lever or screw action. See also PUNCH, EYELET, PLIER TYPE and PRESS, GROMMET AND EYELET, FOOT OPERATED.
What is a Claw Bar? 19 Items: A Claw Bar (BAR,CLAW) is before using, refer to Reference Drawing Group AG.
What is a Shock Type Wheel Stud Nut Wrench? 11 Items: A Shock Type Wheel Stud Nut Wrench (WRENCH,WHEEL STUD NUT,SHOCK TYPE) is a manually operated item designed to remove wheel stud nuts. In operation the inner nut is turned by a socket attached to a shaft on which is a loose swinging weighted handle. The weighted handle may be swung quickly to provide an impact force against the socket to loosen the seized or jammed nuts. The outer nut is held stationary by a separate hexagonal holding wrench.
What is a Drift Pin Set? 30 Items: A Drift Pin Set is a group of DRIFTPIN having different characteristics.
What is a Tire Iron? 25 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 115 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Blacksmith's Vise? 14 Items: A Blacksmith's Vise (VISE,BLACKSMITH'S) is a clamping device consisting of a mounting plate, one stationary and one manual screw actuated jaw and a supporting member extending downward from the stationary jaw to the floor. Designed to be mounted on a bench, table or the like. May include pipe holding jaws.
What is a Machinist's Vise? 64 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Clamp Base Bench Vise? 10 Items: A Clamp Base Bench Vise (VISE,BENCH,CLAMP BASE) is a clamping device consisting of a base, one stationary and one manual screw actuated jaw, and one or more guide bars or rods. Designed with an integral clamp for attaching to a bench, table, or the like. Does not include pipe holding jaws.
What is a Fixed Open End Wrench Set? 86 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Nail Set? 11 Items: A Nail Set is a round knurled, square, hexagonal or octagonal bodied hand tool having a round tapered section terminating in a cupped point. It is designed to set brad head nails below the surface by striking it a hammerlike blow. See also PUNCH, DRIVE PIN.
What is a Socket Wrench Set? 202 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is an Open End Box Wrench Set? 10 Items: An Open End Box Wrench Set (WRENCH SET,OPEN END BOX) is a group of WRENCH, OPEN END BOX having different characteristics.
What is a Combination Box And Open End Wrench Set? 72 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Box Wrench Set? 36 Items: A Box Wrench Set (WRENCH SET,BOX) is a group of box wrenches having different characteristics. It may include a HANDLE, EXTENSION WRENCH. See also WRENCH SET, COMBINATION, BOX AND OPEN END.
What is a Hot Line Stick? 26 Items: A Hot Line Stick is a hand tool consisting of a straight, round stick (pole) made of a suitable nonconductive material with a tool fixed to one end. The other end may be plain or have a butt mounting device fixed to it. Various types of attachments (hooks, rings, and bands) may be fixed to the body. It is designed for use in the repair and maintenance of live high voltage aerial lines. Excludes hot line sticks without heads.
Handle,Mattock-Pick 15 Items
What is a Wrench Kit? 73 Items: A Wrench Kit is an assortment of various types and sizes of wrenches such as SOCKET, SOCKET WRENCH; WRENCH, OPEN END, FIXED; WRENCH, BOX and the like. It may include adapter(s), ratchet(s) and the like. See also WRENCH SET (as modified.
What is a Brad Awl? 15 Items: A Brad Awl (AWL,BRAD) is a small, pointed tool used by shoemakers, saddlers, cabinetmakers, and the like for piercing small holes in wood, leather, and similar materials, and consists of a handle with a ferrule and a blade. The blade is round, terminating in a beveled, sharp straight edge and has a shank which passes through the center of the handle.
What is a Scratch Awl? 20 Items: A Scratch Awl (AWL,SCRATCH) is an item whose nominal length of blade is less than 4 inches (101.6 millimeters) and is provided with a nondetachable handle.
What is a Screw Extractor Set? 10 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 102 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
Jack,Scissors,Hand 26 Items
What is a Piston Ring Expander? 23 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
Mallet,Plastic 62 Items
Mallet,Rubber 10 Items
What is a Wood Mallet? 37 Items: A Wood Mallet (MALLET,WOOD) is excludes MALLET, CALKING; MALLET, HAWSING and MALLET, SERVING.
What is a Rack Bar Jack? 30 Items: A Rack Bar Jack (JACK,RACK BAR) is excludes JACK, BUMPER and JACK, REEL, HAND.
What is a Pneumatic Tire Valve Core Inserter And Remover? 14 Items: A Pneumatic Tire Valve Core Inserter And Remover (INSERTER AND REMOVER,PNEUMATIC TIRE VALVE CORE) is a bar of steel having a small cylindrical slotted end for removing or installing a valve core in a valve stem by a screwing motion. See also REPAIR TOOL, PNEUMATIC TIRE VALVE.
What is a Hand Tube Swaging Tool Kit? 20 Items: A Hand Tube Swaging Tool Kit (SWAGING TOOL KIT,TUBE,HAND) is a hand-operated noncutting tool consisting of one or more PUNCH, TUBE SWAGING, HAND and a tube flaring bar.
What is a Hand Tube Flaring Punch? 11 Items: A Hand Tube Flaring Punch (PUNCH,TUBE FLARING,HAND) is a noncutting tool having a shaped end or section designed to flare the ends of tubes. One type is designed to flare the ends of tubes against a tube sheet, and another to flare tube ends to mate with tube fittings. Includes punch components of FLARING TOOL, TUBE, HAND.
What is a Hose Strap Band Clamping Tool? 26 Items: A Hose Strap Band Clamping Tool (CLAMPING TOOL,STRAP BAND,HOSE) is an item designed to tension and lock metal straps around a rubber hose, and the like. It is also used to clamp and hold fittings therein.
What is a Mechanical Puller? 3073 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 470 Items
What is a Slip Joint Pliers? 84 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Brake Repair Pliers? 14 Items: A Brake Repair Pliers (PLIERS,BRAKE REPAIR) is a tool having jaws designed for use in brake repair operations, such as removing and replacing items such as keys, springs, and the like. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 226 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 12 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 81 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 56 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 15 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 11 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 29 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Cross Tip Screwdriver Set? 14 Items: A Cross Tip Screwdriver Set (SCREWDRIVER SET,CROSS TIP) is a group of SCREWDRIVER, CROSS TIP having different characteristics.
What is a Spanner Wrench Set? 18 Items: A Spanner Wrench Set (WRENCH SET,SPANNER) is a group of items under WRENCH, SPANNER having different characteristics.
What is a Drive Pin Punch Set? 31 Items: A Drive Pin Punch Set (PUNCH SET,DRIVE PIN) is a group of PUNCH, DRIVE PIN having different characteristics.
What is an Aligning Punch Set? 13 Items: An Aligning Punch Set (PUNCH SET,ALIGNING) is a group of PUNCH, ALIGNING having different characteristics. See also DRIFTPIN SET.
What is a Slugging Type Box Wrench Socket? 16 Items: A Slugging Type Box Wrench Socket (SOCKET,SLUGGING TYPE BOX WRENCH) is an item having a hexagonal external drive at one end, made to fit into the internal hexagonal or 12-point opening of a slugging type box wrench. The opposite end has a single-broached hexagonal opening of the same size as the external drive. The item is designed with extra thick walls to withstand the impact of sledge blows on the driving wrench.
What is a Mechanical Puller Step Plate? 44 Items: A Mechanical Puller Step Plate (STEP PLATE,MECHANICAL PULLER) is a circular disk, flanged to provide a shoulder, and designed to provide a base for the screw point of a PULLER, MECHANICAL when pulling externally mounted bearings, gears, and the like from hollow shafts or housings. It has a concentric, countersunk hole to accommodate the puller screw point.
What is a Solid Center Punch? 79 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Cable Type Ratchet Lever Puller? 20 Items: A Cable Type Ratchet Lever Puller (PULLER,RATCHET LEVER,CABLE TYPE) is an item consisting of a metal frame and ratchet lever reel to which is attached one end of a flexible cable (wire rope). The cable feeds through the fast eye in the metal frame, and may be reeved through a slip hook tackle hook. See also BINDER, LOAD; HOIST, WIRE ROPE and STRETCHER, WIRE.
What is an Electronic Equipment Tuning Wand? 18 Items: An Electronic Equipment Tuning Wand (TUNING WAND,ELECTRONIC EQUIPMENT) is a hand-held rod used in determining the adjustment of the windings of a radio frequency coil. It is made of insulating material with iron on one end and brass on the other end. By inserting the iron end in the coil, the inductance is increased and by inserting the brass end, the inductance is decreased.
What is a Combination Open End And Spanner Wrench? 14 Items: A Combination Open End And Spanner Wrench (WRENCH,OPEN END AND SPANNER,COMBINATION) is a tool having open end wrench characteristics at one end and spanner wrench features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s) at the other end.
What is a Detent Handling Tool? 187 Items: A Detent Handling Tool (HANDLING TOOL,DETENT) is a specially designed handling tool consisting of a rigid bar with a T-handle on one end. The other end is equipped with threads designed to mate the threads of a detent to facilitate inserting or extracting.
What is a Hand Material Handling Hook? 23 Items: A Hand Material Handling Hook (HOOK,MATERIAL HANDLING,HAND) is a hook whose curved end conforms to Style AP1, AP2, AP3 or AP4 of Reference Drawing Group AP. Excludes HOOK, MANHOLE COVER, HAND; HOOK, WIRE BREAKING, HAND; HOOK, ROCK CRUSHER FEEDING, HAND; HOOK, STRAINER REMOVING, HAND and HOOKS, BAG HANDLING, HAND.
What is a Magnetic Retrieving Tool? 11 Items: A Magnetic Retrieving Tool (RETRIEVING TOOL,MAGNETIC) is a hand-operated magnetic device used to locate and pick up metallic articles, such as bolts, nuts, pins, washers, and the like, in confined spaces. It may be rigid, flexible or adjustable. Excludes FINGER, MECHANICAL.
What is a Mechanical Puller Adapter? 78 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Combination Box And Open End Box Wrench? 13 Items: A Combination Box And Open End Box Wrench (WRENCH,BOX AND OPEN END BOX,COMBINATION) is a double end wrench, box and open end box, primarily designed for removing or replacing tube fittings. The opening in the open end box may be machined at an angle from the longitudinal center line of the wrench.
What is a Screw Thread Insert Inserter? 136 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Flat Tip Screwdriver Set? 48 Items: A Flat Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP) is a group of SCREWDRIVER, FLAT TIP having different characteristics.
What is a Terminal Crimping Tool Contact Positioner? 89 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 16 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is an Adjustable Wrench? 138 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 239 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 75 Items
Handle,Shovel 10 Items
What is a Socket Wrench Spanner Attachment? 88 Items: A Socket Wrench Spanner Attachment (SPANNER ATTACHMENT,SOCKET WRENCH) is an item having an adjustable or fixed span with pin, hook, or key type end that is used to fit and turn various size retaining rings, cover plates, plugs, couplings, and like parts. Usually designed to be driven by a male driver.
What is a Retaining Ring Installation Tool? 44 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Tacker? 16 Items: A Tacker is a hand-operated, hammerlike or gunlike item without a clincher, used to drive preformed connecting elements like pins, nails or staples through one object or piece of material into another. Excludes STAPLER (as modified).
What is a Bearing And Bushing Inserter? 290 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 207 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 939 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 14 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 93 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 161 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 94 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 141 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 53 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Six Point Tip Screwdriver? 155 Items: A Six Point Tip Screwdriver (SCREWDRIVER,SIX POINT TIP) is a manual screwdriver having a single nonremoveable blade having a tip with six rounded points.
What is a Seal Inserter And Remover? 147 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 478 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is a Preformed Packing Inserter And Remover? 34 Items: A Preformed Packing Inserter And Remover (INSERTER AND REMOVER,PREFORMED PACKING) is a hand tool designed to install and remove a PACKING, PREFORMED.
What is a Pin Remover? 34 Items: A Pin Remover (REMOVER,PIN) is a hand tool designed to facilitate the removal of a pin from a hole.
What is a Pin Inserter And Remover? 13 Items: A Pin Inserter And Remover (INSERTER AND REMOVER,PIN) is a rodlike tool designed to facilitate the insertion and removal of a pin from a hole.
What is an Electrical Contact Inserter And Remover? 37 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Piston Inserter? 40 Items: A Piston Inserter (INSERTER,PISTON) is a tool designed to permit installation of a piston or piston assembly without damaging the packings or piston.
What is a Spring Inserter And Remover? 85 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 13 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Stud Inserter? 22 Items: A Stud Inserter (INSERTER,STUD) is a device designed to drive in studs. It does not have any facilities for removing or extracting studs. See also INSERTER AND REMOVER, STUD.
What is a Stud Inserter And Remover? 17 Items: A Stud Inserter And Remover (INSERTER AND REMOVER,STUD) is a group of items designed to extract and to drive studs. It may include collets, guides, housings, holders and the like. See also REMOVER SET, STUD and INSERTER, STUD.
What is a Gear Inserter? 54 Items: A Gear Inserter (INSERTER,GEAR) is a hand tool designed to install various gears onto a gearshaft. It may be operated by a pushing or a striking force.
What is a Crimping Tool Die? 73 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is an Electrical Connector Inserter? 45 Items: An Electrical Connector Inserter (INSERTER,ELECTRICAL CONNECTOR) is a hand tool designed to hold an electrical connector, and to assist in the positioning and installation of the connector on a cover, panel or the like.
What is a Float? 12 Items: A Float is a tool used for concrete, plastering and grouting work.
What is a Mechanical Puller Set? 19 Items: A Mechanical Puller Set (PULLER SET,MECHANICAL) is two or more separate PULLER, MECHANICAL of different fixed sizes.
What is a Lifting Pneumatic Bag? 11 Items: A Lifting Pneumatic Bag (PNEUMATIC BAG,LIFTING) is a device made of flexible material designed to lift another item by being placed under the item and being inflated with air or some other gas. It will have a means of being connected to an air or gas source and may include a connector hose, a control valve and/or a pressure regulator.
What is a Cable Tie Installation Tool? 22 Items: A Cable Tie Installation Tool (INSTALLATION TOOL,CABLE TIE) is a lightweight, hand-held, hand-operated tool designed to fasten cable ties, straps and the like. Cable tie is inserted into the nose of the tool flush to the cable tie head. Trigger handle tightens cable tie and cuts off any excess. These installation tools are available in a variety of sizes depending on their intended use with miniature, intermediate, standard, heavy or extra heavy cross section ties.
What is a Bearing Staking Installation Tool? 159 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
Wrench Set,Ratchet 15 Items
What is a Sealant Dispenser? 26 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Retaining Ring Pliers Set? 10 Items: A Retaining Ring Pliers Set (PLIERS SET,RETAINING RING) is a group of PLIERS, RETAINING RING having different characteristics.
What is a Hand Armament Subsystem Carrier? 52 Items: A Hand Armament Subsystem Carrier (CARRIER,ARMAMENT SUBSYSTEM,HAND) is a metallic item with a clamp device and/or space for depositing articles. It is used for transporting weapon parts during maintanence and/or repair work, such as gun barrel, automatic loader, breechblock and the like.
What is a Ring Retaining Pliers Tip Set? 13 Items: A Ring Retaining Pliers Tip Set (TIP SET,PLIERS,RING RETAINING) is a collection of removable metallic tips in matched pairs used to provide various size capablities to PLIERS, RING RETAINING which permits the removal and installation of internal and external retaining rings.
What is a Plug Electrical Connector Extractor? 45 Items: A Plug Electrical Connector Extractor (EXTRACTOR,ELECTRICAL CONNECTOR,PLUG) is a hand tool designed to disassemble CONNECTOR, PLUG, ELECTRICAL from a CONNECTOR, RECEPTACLE, ELECTRICAL.
What is a Torque Wrench Adapter Set? 10 Items: A Torque Wrench Adapter Set (ADAPTER SET,TORQUE WRENCH) is tWO or more ADAPTER, TORQUE WRENCH of different sizes.
What is an Electronic Component Inserter And Remover? 79 Items: An Electronic Component Inserter And Remover (INSERTER AND REMOVER,ELECTRONIC COMPONENT) is an item which can insert or remove an electronic component package such as MICROCIRCUIT; RESISTOR, NETWORK (as modified); and the like from its mounting position or socket. Excludes INSERTER AND REMOVER, ELECTRICAL CONTACT; REMOVER, ELECTRICAL CONTACT; EXTRACTOR, ELECTRICAL CARD; EXTRACTOR, ELECTRONIC CRYSTAL UNIT; EXTRACTOR, ELECTRON TUBE.
What is an Impact Type Bit Set And Handle Screwdriver? 14 Items: An Impact Type Bit Set And Handle Screwdriver (SCREWDRIVER,BIT SET AND HANDLE,IMPACT TYPE) is an item consisting of a set of screwdriver bits and a impact driver to accommodate the bits of various types and characteristics. It is designed to transmit a strong rotating movement by the impact of a hammer blowed on the impact driver. It is used to loosen rusted or seized screws. Excludes SCREWDRIVER, BIT SET AND HANDLE.
What is a Hand Vise Jaw? 19 Items: A Hand Vise Jaw (JAW,VISE,HAND) is an item consisting of two opposing parts of a VISE, HAND. The item is moveable and able to open and close. It can hold, grasp or clamp work.
What is a Screwdriver Handle? 28 Items: A Screwdriver Handle (HANDLE,SCREWDRIVER) is an item used to accommodate various types of BIT, SCREWDRIVER. It is designed to rotate a bit that is used for installing or removing screws.
What is a Wire Twister Pliers? 25 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 284 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is a Mechanical Puller Body? 45 Items: A Mechanical Puller Body (BODY,PULLER,MECHANICAL) is an item designed to support and enclose the internal parts of a PULLER,MECHANICAL.
What is a Flat Tip And Cross Tip Screwdriver Set? 39 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is a Socket Wrench Screwdriver Attachment Set? 22 Items: A Socket Wrench Screwdriver Attachment Set (SCREWDRIVER ATTACHMENT SET,SOCKET WRENCH) is a set of screwdriver attachment, socket wrench of different sizes. Items consist of a female square drive on one end to attach to a handle, socket wrench and various screwdriver tip configurations on the opposite end. Excludes SCREWDRIVER ATTACHMENT,SOCKET WRENCH
What is an Oil Filter Wrench? 44 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 430 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Communications Equipment Spring Adjuster? 13 Items: A Communications Equipment Spring Adjuster (ADJUSTER,SPRING,COMMUNICATIONS EQUIPMENT) is a single or double end tool, equipped with slot(s) of various dimensions or with cylindrical rod(s), used for adjusting the springs or spring tensioned parts of electronic equipment.
What is a Rotating Members Aligning Tool? 32 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
What is a Final Drive Assembly Alignment Pin? 41 Items: A Final Drive Assembly Alignment Pin (ALIGNMENT PIN,FINAL DRIVE ASSEMBLY) is a special designed pin used in the assembling of the final drive.
Arm,Handling Tool 77 Items
What is a Splicing Sleeve Compressing Tool? 23 Items: A Splicing Sleeve Compressing Tool (COMPRESSING TOOL,SPLICING SLEEVE) is a hand tool having hinged leverage handles similar to a CUTTER, BOLT or pliers, designed to compress a splicing sleeve when joining the ends of two conductors, or when forming an eye splice in the end of a wire rope. Excludes CRIMPING TOOL, TERMINAL, HAND.
What is a Hand Screw Jack Extension? 14 Items: A Hand Screw Jack Extension (EXTENSION,HAND SCREW JACK) is a length of externally threaded rigid shafting which is the adjustable section of a JACK, SCREW, HAND.
What is a Mechanical Puller Gear Adapter? 21 Items: A Mechanical Puller Gear Adapter (GEAR ADAPTER,PULLER,MECHANICAL) is an adapter that adapts a PULLER,MECHANICAL, to pull a certain gear.
Handle,Hydraulic Jack 18 Items
What is a Female Electrical Contact Resizing Tool? 11 Items: A Female Electrical Contact Resizing Tool (RESIZING TOOL,FEMALE ELECTRICAL CONTACT) is a tool designed to shape to a specific size, female contacts such as those used on electrical connectors, tube sockets, crystal sockets, and pin jacks.
What is a Screwdriver And Socket Wrench Combination? 13 Items: A Screwdriver And Socket Wrench Combination is a hand-tool formed into an integral unit with a socket wrench at one end and a screwdriver bit at the other end. See also SCREWDRIVER AND WRENCH ASSEMBLY.
What is a Hand Hose Fitting Swaging Tool Kit? 11 Items: A Hand Hose Fitting Swaging Tool Kit (SWAGING TOOL KIT,HOSE FITTING,HAND) is a device, hydraulically actuated by hand or power operated pump, consisting of face plate, adapter plate, finger cages, fingers, ram, bushing, and expanding mandrels combined on a single base in various functional arrangements. It is used for swaging the outside diameter of hose assembly fittings, expanding the inside diameter of hose assemblies, and securing the fabrication of hose assemblies. Included are a hand or power operated pump, lubricant, cases, and trays.
What is a Catch Lever Tool? 12 Items: A Catch Lever Tool (LEVER TOOL,CATCH) is a specially designed hand tool which engages the opening and closing lever of a CATCH (as modified) for ease of operation. It is constructed of thin rigid material, usually flat, and one end has an engaging tongue.
What is a Manual Impact Wrench? 11 Items: A Manual Impact Wrench (WRENCH,IMPACT,MANUAL) is a manually operated handheld tool consisting of spring-loaded handle and a power-impact head which delivers a torsional impact from either continuous movement of the handle in one direction, or by a reciprocating action. It is used in tightening and loosening fasteners, such as bolts, nuts, and the like. The item may include sockets, extensions and offset fittings, nut runners, and the like.
What is a Drift? 63 Items: A Drift is an item consisting of a tubular body fitted with replaceable tips. It is designed to insert or remove mechanical components where space is restricted.
What is a Nutdriver? 46 Items: A Nutdriver is a non-powered hand tool with a screwdriver style handle, shaft and formed female hex or square socket at driving end.
What is a Locking Device Removal Tool? 12 Items: A Locking Device Removal Tool (REMOVAL TOOL,LOCKING DEVICE) is a hand tool designed to facilitate the removal of a WASHER, KEY and a LOCKING PLATE, NUT AND BOLT.
What is a Hydraulic Fitting Crimping Tool Head? 26 Items: A Hydraulic Fitting Crimping Tool Head (HEAD,CRIMPING TOOL,HYDRAULIC FITTING) is a component of a crimping tool used to compress fittings on fluid tubes. It consists of a U-shape item, in which, are mounted different sizes of DIE, CRIMPING TOOL for tubes of various diameters.
What is a Torque Screwdriver? 11 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.
What is a Special Purpose Combination Wrench? 13 Items: A Special Purpose Combination Wrench (WRENCH,COMBINATION,SPECIAL PURPOSE) is a tool having a combination of ends and facets. The ends may have open end, box or spanner characteristics. The sides may have features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s). Designed to fit specific items, not sized as standard or metric.
What is a Screwdriver Bit Holder? 56 Items: A Screwdriver Bit Holder (HOLDER,SCREWDRIVER BIT) is an attachment with a socket end for accepting male hexagon shank insert bits and a drive end for adapting to a portable power or hand tool.
What is a Telescoping Pole? 16 Items: A Telescoping Pole (POLE,TELESCOPING) is an item which is designed to be extended or compressed by the sliding of overlapping sections. This item may or may not be able to accommodate an extension.

Stock Items From Supply Class 5120 Page 47 of 110

5120-14-469-2259
Seal Inserter And Remover

144692259
40N108314-1: RNCC: 3 | RNVC: 2

13 Apr 1994

5120-14-424-5440
Jeu Brides Darret

144245440
8-0132A1Z: RNCC: 3 | RNVC: 2
9762-18: RNCC: 5 | RNVC: 2
9409762180: RNCC: 5 | RNVC: 2

27 May 1988

5120-14-282-9178
Electric Melting Pot

142829178
5565-1-230V: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-253-9313

5120-14-436-0264
Preformed Packing Inserter

144360264
RT30254: RNCC: 3 | RNVC: 2

29 Nov 1989

5120-14-289-3832

5120-14-281-5051

5120-14-534-3246
Open End Wrench

145343246
NNM0010032532339: RNCC: 2 | RNVC: 2

19 Mar 2003

5120-14-532-7099
Cross Tip Screwdriver

145327099
AZDB.1X40: RNCC: 3 | RNVC: 2
1092111N00: RNCC: 5 | RNVC: 2

4 Dec 2002

5120-14-540-4454
Open End Wrench

145404454
102100-21: RNCC: 3 | RNVC: 9

27 Mar 2004

5120-14-527-8630
Torque Wrench Adapter

145278630
E2C001230000116: RNCC: 3 | RNVC: 2

28 Nov 2001

5120-14-297-1284
Spanner Wrench

142971284
PR46555: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-433-6703
Open End Wrench

144336703
MNO2400215: RNCC: 3 | RNVC: 2
M0F2400215: RNCC: 5 | RNVC: 1

2 Aug 1989

5120-14-505-9879
Bearing And Bushing Inserter And Remover

145059879
K117167C: RNCC: 3 | RNVC: 2

3 Apr 1998

5120-14-456-2747
Electron Tube Extractor

144562747
008208035P: RNCC: 3 | RNVC: 2

25 Jun 1992

5120-14-528-6743
Socket Head Screw Key

145286743
82H.16: RNCC: 3 | RNVC: 2
SYQ0755: RNCC: 5 | RNVC: 2

5 Feb 2002

5120-14-454-6722
Cremaill Vis Broche

144546722
506891RTBGM2: RNCC: 3 | RNVC: 2
506891R: RNCC: 5 | RNVC: 2

9 Apr 1992

5120-14-559-6079
Mechanical Puller

145596079
8813544000: RNCC: 3 | RNVC: 2

2 Feb 2009

5120-14-266-7608
Cle De Reglage

142667608
C238852: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-514-0131
Open End Wrench

145140131
ENFD29159-20X22: RNCC: 3 | RNVC: 2

22 Apr 1999

5120-14-527-5863
Spanner Wrench

145275863
MHS447-26: RNCC: 3 | RNVC: 2

30 Oct 2001

5120-14-447-3405
Torque Wrench Adapter

144473405
10.14: RNCC: 3 | RNVC: 2
TA5006P007: RNCC: 5 | RNVC: 2
0240550N00: RNCC: 5 | RNVC: 2
10-14: RNCC: 5 | RNVC: 2
1080389P00: RNCC: 5 | RNVC: 2
3148510925455: RNCC: 5 | RNVC: 2
1780550474: RNCC: 5 | RNVC: 2
91629920: RNCC: 5 | RNVC: 2
0092545: RNCC: 5 | RNVC: 9

15 May 1991

5120-14-440-0925
Cle Guide Thermique

144400925
002T675: RNCC: 3 | RNVC: 2

11 Jul 1990

5120-14-427-1475
Socket Head Screw Key

144271475
112-58367: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-224-8545
Socket Head Screw Key

142248545
044BBF9AREP1: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-503-5354
Spanner Wrench

145035354
808275: RNCC: 3 | RNVC: 2

19 Jan 1998

5120-14-394-9017
Socket Wrench Screwdriver Attachment

143949017
SM12: RNCC: 3 | RNVC: 2

2 Oct 1984

5120-14-326-9150
Socket Wrench Screwdriver Attachment

143269150
468719: RNCC: 3 | RNVC: 2
468719: RNCC: 5 | RNVC: 2
LMT468719: RNCC: 5 | RNVC: 2

2 Jul 1975

5120-14-506-2648
Tournevis Lame

5120-14-371-4259
Spanner Wrench

143714259
6254-57028: RNCC: 3 | RNVC: 2

5 Aug 1981

5120-14-246-6997
Open End Wrench

142466997
10-8X10EC0: RNCC: 3 | RNVC: 2
10-8X10CM: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-514-0107
Open End Wrench

145140107
ENFD29159-15X17: RNCC: 3 | RNVC: 2

22 Apr 1999

5120-14-371-1564
Slip Joint Pliers

143711564
186-18Y: RNCC: 3 | RNVC: 2
186-18CPY: RNCC: 5 | RNVC: 2
91618398: RNCC: 5 | RNVC: 2

5 Jun 1981

5120-14-298-5561
Open End Wrench

142985561
1872-19: RNCC: 3 | RNVC: 2
067-030-000-473: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-439-7788
Bearing And Bushing Inserter

144397788
6801G33-0040-20: RNCC: 3 | RNVC: 2

23 May 1990

5120-14-283-1770

5120-14-304-5604

5120-14-297-4806

5120-14-371-4791
Spanner Wrench

143714791
HN5: RNCC: 3 | RNVC: 2
SKFHN5: RNCC: 5 | RNVC: 9

5 Aug 1981

5120-14-326-9847
Socket Head Screw Key

143269847
56195: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-450-3550
Socket Head Screw Key

144503550
0123815: RNCC: 3 | RNVC: 2
83.S5: RNCC: 5 | RNVC: 2

1 Oct 1991

5120-14-508-4893
Slip Joint Pliers

145084893
485.23: RNCC: 3 | RNVC: 2
3148511788974: RNCC: 5 | RNVC: 2
0178897: RNCC: 5 | RNVC: 2
194-2696: RNCC: 5 | RNVC: 2
FACOM485.23: RNCC: 5 | RNVC: 9

15 Sep 1998

5120-14-392-0863

5120-14-541-0612
Spanner Wrench

145410612
280277: RNCC: 3 | RNVC: 2

12 May 2004

5120-14-422-2316
Spanner Wrench

144222316
0471-205400: RNCC: 3 | RNVC: 2

24 Feb 1988

5120-14-356-1900
Open End Wrench

143561900
187546: RNCC: 3 | RNVC: 2

25 Apr 1979

5120-14-372-2210
Ensemb Guide-Pointe

143722210
68260: RNCC: 3 | RNVC: 2
11193: RNCC: 5 | RNVC: 9

1 Sep 1981

5120-14-317-0414
Jeu Rodoir De Vanne

143170414
RT5097: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-248-5161

5120-14-444-7581
Broche

144447581
NO PRIMARY REF14-444-7581: RNCC: 3 | RNVC: 2
VTR251-2P-11451: RNCC: 5 | RNVC: 9

21 Jan 1991

5120-14-222-1405

5120-14-538-8802
Spanner Wrench

145388802
NGM0022030200432: RNCC: 2 | RNVC: 2

9 Dec 2003

5120-14-382-7623
Electrical Contact Inserter

143827623
809846: RNCC: 3 | RNVC: 2

17 Feb 1983

5120-14-423-9440
Sediment Strainer Element

144239440
057070100: RNCC: 3 | RNVC: 2

5 May 1988

5120-14-564-9061
Seal Inserter

145649061
885747: RNCC: 3 | RNVC: 2

16 Jun 2010

5120-14-319-4532
Tube Demmanchem Mat

143194532
3130S95-68-015: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-530-3660
Combination Box And Open End Wrench

145303660
99900: RNCC: 3 | RNVC: 2
3148510999005: RNCC: 5 | RNVC: 2

5 Jun 2002

5120-14-530-6465
Spanner Wrench

145306465
R47123: RNCC: 3 | RNVC: 2

1 Jul 2002

5120-14-294-0269
Spanner Wrench

142940269
RK5939REPG: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-383-0604
Spanner Wrench

143830604
F47196: RNCC: 3 | RNVC: 2

17 Mar 1983

5120-14-296-0183
Sheet Metalworking Dolly Block

142960183
3860: RNCC: 3 | RNVC: 9

1 Jan 1973

5120-14-306-2887
Spanner Wrench

143062887
45417: RNCC: 3 | RNVC: 2
45417: RNCC: 5 | RNVC: 2

1 Jan 1974

5120-14-202-1110
Flat Tip Screwdriver

142021110
ENFD5234E10X250: RNCC: 3 | RNVC: 2
2108: RNCC: 5 | RNVC: 2
230-250: RNCC: 5 | RNVC: 2

1 Jan 1963

5120-14-375-1791
Spanner Wrench

143751791
16380388: RNCC: 3 | RNVC: 2
16380388: RNCC: 5 | RNVC: 9

26 Feb 1982

5120-14-042-9524
Spanner Wrench

140429524
94AM017: RNCC: 3 | RNVC: 2

8 Dec 1981

5120-14-293-4459
Bearing Staking Installation Tool

142934459
8810250030: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-466-3707
Open End Wrench

144663707
61AM005: RNCC: 3 | RNVC: 2

3 Nov 1993

5120-14-440-8019
Spanner Wrench

144408019
Y075-044-000A: RNCC: 3 | RNVC: 2

25 Jul 1990

5120-14-427-1486
Socket Head Screw Key

144271486
6252-54283: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-425-2535
Gabarit Percage Cas

144252535
MUP5779: RNCC: 3 | RNVC: 2

28 Jun 1988

5120-14-031-7527

5120-14-225-8914

5120-14-242-0802
Open End Wrench

142420802
BB136: RNCC: 3 | RNVC: 9

1 Jan 1967

5120-14-552-5345
Socket Wrench Socket

145525345
NK.21A: RNCC: 3 | RNVC: 2
NK.21A: RNCC: 5 | RNVC: 2

12 Jan 2007

5120-14-375-8038
Spanner Wrench

143758038
300A92811: RNCC: 3 | RNVC: 2
91371613: RNCC: 5 | RNVC: 2
300A92811: RNCC: 5 | RNVC: 9
300A92811: RNCC: 5 | RNVC: 9

30 Mar 1982

5120-14-362-7518
Vise Jaw Caps

143627518
PR46621: RNCC: 3 | RNVC: 2

19 Mar 1980

5120-14-463-6190
Hand Terminal Crimping Tool

144636190
0446649W00: RNCC: 3 | RNVC: 2

22 Jun 1993

5120-14-455-7233
Face Spanner Wrench Socket

144557233
132166: RNCC: 3 | RNVC: 2

11 Jun 1992

5120-14-358-3621
Open End Wrench

143583621
522CM14X15: RNCC: 3 | RNVC: 9
DEM522CM14X15: RNCC: 5 | RNVC: 9

13 Aug 1979

5120-14-417-9879
Premontage Bloc

144179879
VOMO10SX: RNCC: 3 | RNVC: 2
VOMO10SX: RNCC: 3 | RNVC: 9
101743: RNCC: 5 | RNVC: 2
V0M010S: RNCC: 5 | RNVC: 2
V0M010S: RNCC: 5 | RNVC: 9

6 Aug 1987

5120-14-561-2439
Torque Wrench Adapter

145612439
98AMS172327002: RNCC: 3 | RNVC: 2

29 Jun 2009

5120-14-380-6759
Serre Pulverisateur

143806759
02640908300: RNCC: 3 | RNVC: 2
026409083: RNCC: 5 | RNVC: 2

29 Nov 1982

5120-14-253-3684
Levier Pour Palier

142533684
410233M5: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-260-4178

5120-14-261-1737
Cross Tip Screwdriver

142611737
745-91-3005: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-297-9656
Module Inerte

142979656
1605-00-11: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-220-5171
Outillage Demmanche

142205171
3160S95-65-030: RNCC: 3 | RNVC: 2
3160-95-65-030: RNCC: 5 | RNVC: 2

1 Jan 1965

5120-14-324-2126
Piton De Demontage

143242126
065-30-9003REP3: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-314-4890
Mandrin Pose Bagues

143144890
M2D61059: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-516-8012
Poussoir

145168012
5001008735: RNCC: 3 | RNVC: 2

18 Oct 1999

5120-14-368-5251
Open End Wrench

143685251
94AM021: RNCC: 3 | RNVC: 2
85-691-5151: RNCC: 6 | RNVC: 9

20 Feb 1981

5120-14-344-7849
Bearing And Bushing Inserter And Remover

143447849
8810120030: RNCC: 3 | RNVC: 2
85-688-8993: RNCC: 6 | RNVC: 9

9 Sep 1977

5120-14-363-5256
Socket Wrench Socket

143635256
Y060-004-000A: RNCC: 3 | RNVC: 2

9 May 1980

5120-14-531-3213
Spanner Wrench

145313213
Q47812-1000: RNCC: 3 | RNVC: 2

7 Aug 2002

5120-14-207-5537
Socket Head Screw Key Set

142075537
NO PRIMARY REF14-207-5537: RNCC: 3 | RNVC: 2
W3-8TUM: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-334-0144

5120-14-237-3795

5120-14-241-1454
Cle A Ergots Specia

142411454
0632-78: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-402-4114
Torque Wrench Adapter

144024114
MHB304-23: RNCC: 3 | RNVC: 2

3 Jul 1985

5120-14-270-7139
Fixed Open End Wrench Set

142707139
9531JEU4CLESPLATES: RNCC: 2 | RNVC: 2
NO PRIMARY REF14-270-7139: RNCC: 3 | RNVC: 2
9531JEU4CLESPLATES: RNCC: 5 | RNVC: 9

1 Jan 1970

5120-14-220-0285
Open End Wrench

142200285
33-15X17: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-448-7376
Freinage Outil

144487376
M31-111A: RNCC: 3 | RNVC: 2
M31111A: RNCC: 5 | RNVC: 2

9 Jul 1991

5120-14-253-9732
Prehenseur Pour Jam

142539732
A21865M1: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-326-4295
Ressort Dextracteur

143264295
470448: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-223-7457
Barre De Cle Decrou

142237457
701308: RNCC: 3 | RNVC: 9
062054212: RNCC: 5 | RNVC: 9
54212: RNCC: 5 | RNVC: 9

1 Jan 1966

5120-14-370-6578

5120-14-330-3099

5120-14-427-0881
Speciale Cle

144270881
537217: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-478-5945
Verification Masse

144785945
MKL0450005: RNCC: 3 | RNVC: 2

8 Nov 1995

5120-14-436-0216
Extracteur Goupille

144360216
806991: RNCC: 3 | RNVC: 2

29 Nov 1989

5120-14-245-8140

5120-14-343-1821
Pose Filet Rapp Nez

143431821
01500606032: RNCC: 3 | RNVC: 2
01556060021: RNCC: 5 | RNVC: 2
01500606032: RNCC: 5 | RNVC: 2

16 Jun 1977

5120-14-365-9056
Reglag Soupape Cle

143659056
422968: RNCC: 3 | RNVC: 2

4 Nov 1980

5120-14-219-2183

5120-14-333-3835

5120-14-375-3182
Mandrin De Demontag

143753182
A33403H: RNCC: 3 | RNVC: 2

26 Feb 1982

5120-14-283-1397

5120-14-392-5663

5120-14-490-8785
Tournev

144908785
4065 200 000 594: RNCC: 3 | RNVC: 2
F300 0T 000 5050: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-347-7396

5120-14-434-3592
Mechanical Puller Attachment

144343592
8815464006: RNCC: 3 | RNVC: 2
89411410: RNCC: 5 | RNVC: 2

20 Sep 1989

5120-14-320-3623
Spanner Wrench

143203623
MAS4680: RNCC: 3 | RNVC: 2
5011849: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-329-6345
De Centrage Obus

143296345
SMS221: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-366-9419
Enclume Billot

143669419
2088: RNCC: 3 | RNVC: 2

11 Dec 1980

5120-14-392-0850

5120-14-490-8885
Filiere

144908885
4067 170 000 411: RNCC: 3 | RNVC: 2
F300 0T 000 5157: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-305-5281
Machoire De Sertiss

143055281
R282243: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-334-8062

5120-14-226-0026

5120-14-439-1248
Plug Electrical Connector Extractor

144391248
3490-3: RNCC: 3 | RNVC: 2
91517845: RNCC: 5 | RNVC: 2

25 Apr 1990

5120-14-468-9833
Seal Inserter And Remover

144689833
40N108335-4: RNCC: 3 | RNVC: 2

30 Mar 1994

5120-14-472-2943
Leveling-Support Jack

144722943
2 ED 110 N53 LP 1: RNCC: 3 | RNVC: 9

18 Oct 1994

5120-14-219-2694

5120-14-212-3673

5120-14-393-8799
Monte-Joint Outil

143938799
NO PRIMARY REF14-393-8799: RNCC: 3 | RNVC: 2
OU136843: RNCC: 5 | RNVC: 9

23 Jun 1984

5120-14-248-1077
Cle Leve-Frein

142481077
NO PRIMARY REF14-248-1077: RNCC: 3 | RNVC: 2
11205: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-441-5093
Retaining Ring Pliers

144415093
6801V32-3221-20: RNCC: 3 | RNVC: 2

30 Aug 1990

5120-14-365-9052
Levier De Reglage

143659052
422962: RNCC: 3 | RNVC: 2

4 Nov 1980

5120-14-272-3700

5120-14-569-0376
Rotating Members Aligning Tool

145690376
F27388000: RNCC: 3 | RNVC: 2
F27388000: RNCC: 5 | RNVC: 2

1 Aug 2011

5120-14-253-4529

5120-14-214-3135

5120-14-347-6361
Spanner Wrench

143476361
09103: RNCC: 3 | RNVC: 2
85-689-3594: RNCC: 6 | RNVC: 9

1 Mar 1978

5120-14-448-5017
Wrench

144485017
EMB00173-001: RNCC: 3 | RNVC: 2
85-693-9573: RNCC: 6 | RNVC: 9

26 Jun 1991

5120-14-357-4326
Socket Head Screw Key

143574326
7395CLEDE2-5MM: RNCC: 3 | RNVC: 2
XCELITE99-74MM: RNCC: 5 | RNVC: 9

7 Jun 1979

5120-14-327-4955
Electron Tube Extractor

143274955
NO PRIMARY REF14-327-4955: RNCC: 3 | RNVC: 2
PN157521: RNCC: 5 | RNVC: 9

2 Jul 1975

5120-14-441-2374
Socket Head Screw Key

144412374
703A93-0900-43: RNCC: 3 | RNVC: 2

22 Aug 1990

5120-14-340-8219
Open End Wrench

143408219
E74302P55X60AS: RNCC: 2 | RNVC: 1
70-55X60: RNCC: 3 | RNVC: 2
3272670287303: RNCC: 5 | RNVC: 2

14 Feb 1977

5120-14-420-7205
Socket Wrench Spanner Attachment

144207205
6224-34942: RNCC: 3 | RNVC: 2

16 Dec 1987

5120-14-040-1998
Spanner Wrench

140401998
NO PRIMARY REF14-040-1998: RNCC: 3 | RNVC: 2
BL43946: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-447-3413
Pliers

144473413
387.16CPY: RNCC: 3 | RNVC: 2
0240700L00: RNCC: 5 | RNVC: 2
91714530: RNCC: 5 | RNVC: 2
0714 01 74: RNCC: 5 | RNVC: 2
H24181: RNCC: 5 | RNVC: 2
3059001033: RNCC: 5 | RNVC: 2
3148511725511: RNCC: 5 | RNVC: 2
387-16CPY: RNCC: 5 | RNVC: 2
387.16CPY: RNCC: 5 | RNVC: 9
0172551: RNCC: 5 | RNVC: 9

15 May 1991

5120-14-377-9229
Open End Wrench

143779229
MAT196-0066F37: RNCC: 3 | RNVC: 2
GSM196-011F40: RNCC: 3 | RNVC: 2

10 Jun 1982

5120-14-478-2781
Socket Head Screw Key

144782781
2609-0230-003: RNCC: 3 | RNVC: 2

18 Oct 1995

5120-14-418-1413
Retaining Ring Pliers

144181413
191-13: RNCC: 3 | RNVC: 2
3272670226821: RNCC: 5 | RNVC: 2

6 Aug 1987

5120-14-371-2222

5120-14-219-6891

5120-14-370-4879
Electrical Contact Remover

143704879
65865: RNCC: 3 | RNVC: 2

18 May 1981

5120-14-370-3800
Flat Tip Screwdriver

143703800
407500000010: RNCC: 3 | RNVC: 2

18 May 1981

5120-14-459-1612
Bearing Staking Installation Tool

144591612
45056139: RNCC: 3 | RNVC: 2
45056139: RNCC: 5 | RNVC: 9

19 Nov 1992

5120-14-530-8414
Electrical Connector Inserter

145308414
F1351623: RNCC: 3 | RNVC: 2

9 Jul 2002

5120-14-561-1758
Combination Box And Open End Wrench

145611758
440.5H: RNCC: 3 | RNVC: 2
3148517679146: RNCC: 5 | RNVC: 2
767914: RNCC: 5 | RNVC: 2

23 Jun 2009

5120-14-497-8707
Cable

144978707
F300 0T 022 9442: RNCC: 3 | RNVC: 2
45525668: RNCC: 5 | RNVC: 2

22 Oct 1997

5120-14-336-3364
Douille Montage Bag

143363364
RK5939REPK11: RNCC: 3 | RNVC: 2

24 Jul 1976

5120-14-317-1063

5120-14-288-6885

5120-14-490-8747
Cle

144908747
4065 030 000 922: RNCC: 3 | RNVC: 2
F300 0T 000 5002: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-286-7837

5120-14-443-9723

5120-14-472-5184
Serrage Ecrou Biell

144725184
10443G: RNCC: 3 | RNVC: 2
260729-07: RNCC: 5 | RNVC: 2
98250243113: RNCC: 5 | RNVC: 2

26 Oct 1994

5120-14-511-5895
Socket Wrench Screwdriver Attachment Set

145115895
NO PRIMARY REF14-511-5895: RNCC: 3 | RNVC: 2
3148515066214: RNCC: 5 | RNVC: 2
506621: RNCC: 5 | RNVC: 2
JX.41: RNCC: 5 | RNVC: 2

6 Jan 1999

5120-14-321-8544
Plaque Equipee

143218544
6507595: RNCC: 3 | RNVC: 2
6507595: RNCC: 5 | RNVC: 1
85-626-7132: RNCC: 6 | RNVC: 9

1 Jan 1975

5120-14-286-0299
Cle Speciale

142860299
6424-0221: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-370-1124
Pliers

143701124
188-14CPY: RNCC: 3 | RNVC: 2
3148511430200: RNCC: 5 | RNVC: 2
130079: RNCC: 5 | RNVC: 2
188-14Y: RNCC: 5 | RNVC: 9

18 May 1981

5120-14-280-3887

5120-14-218-6728

5120-14-237-2414
Rodoirs Equipes Jeu

142372414
17895T1: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-416-7637
Rondelle Dappui

144167637
540388: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-490-8647
Broche

144908647
4051 060 004 091: RNCC: 3 | RNVC: 2
F300 0T 000 4884: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-216-3215

5120-14-406-6392
Jet Plastique

144066392
OUT50358: RNCC: 3 | RNVC: 2
0UT50358: RNCC: 5 | RNVC: 2

8 Jan 1986

5120-14-323-8158

5120-14-241-6019

5120-14-231-9954
Extracteur De Palie

142319954
DAP: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-380-8406
Extracteur

143808406
PR47674: RNCC: 3 | RNVC: 2

14 Dec 1982

5120-14-436-0291
Compression Montage

144360291
RT32468: RNCC: 3 | RNVC: 2

29 Nov 1989

5120-14-410-3841
Pous Tube Outillage

144103841
15737-515: RNCC: 3 | RNVC: 2

18 Jun 1986

5120-14-490-8798
Trousse

144908798
4065 294 000 513: RNCC: 3 | RNVC: 2
F300 0T 000 5068: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-262-2678
Adaptateur

142622678
PR46595: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-228-6020

5120-14-341-9974
Cle Reglage Bobine

143419974
446156: RNCC: 3 | RNVC: 2
GC1017: RNCC: 5 | RNVC: 2

14 Apr 1977

5120-14-311-1698

5120-14-359-7522
Bras Suspen Mandrin

143597522
A132420: RNCC: 3 | RNVC: 2
100340: RNCC: 5 | RNVC: 2

15 Oct 1979

5120-14-350-6858

5120-14-251-0454

5120-14-260-2339

5120-14-440-0828
Torque Wrench Adapter

144400828
11.19: RNCC: 3 | RNVC: 2
3148510927107: RNCC: 5 | RNVC: 2
0092710: RNCC: 5 | RNVC: 9

11 Jul 1990

5120-14-531-1288
Electrical Connector Inserter

145311288
10566744: RNCC: 3 | RNVC: 2

24 Jul 2002

5120-14-503-4638
Electronic Component Inserter And Remover

145034638
29339557: RNCC: 3 | RNVC: 2

14 Jan 1998

5120-14-513-1759
Detent Handling Tool

145131759
10386535: RNCC: 3 | RNVC: 2

9 Mar 1999

5120-14-539-3921
Plug Electrical Connector Extractor

145393921
39566051: RNCC: 3 | RNVC: 2

13 Jan 2004

5120-14-294-0265

5120-14-484-4405
Bearing Staking Installation Tool

144844405
330A93-2026-01: RNCC: 3 | RNVC: 2
F300 0T 021 9383: RNCC: 5 | RNVC: 9

14 Nov 1996

5120-14-507-3208
Screw Push-Pull Jack

145073208
118071: RNCC: 3 | RNVC: 2

24 Jun 1998

5120-14-341-6764
Inserted Hammer Face

143416764
EC.50: RNCC: 3 | RNVC: 2
EC.50: RNCC: 5 | RNVC: 2
3148510224602: RNCC: 5 | RNVC: 2
EC50: RNCC: 5 | RNVC: 2
0022460: RNCC: 5 | RNVC: 9

14 Apr 1977

5120-14-493-3446
Cle

144933446
0411-60220: RNCC: 3 | RNVC: 2
F300 0T 012 4872: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-206-0114

5120-14-445-7056
Torque Wrench Adapter

144457056
10.1/2: RNCC: 3 | RNVC: 2
3148510926100: RNCC: 5 | RNVC: 2
0092610: RNCC: 5 | RNVC: 9

22 Feb 1991

5120-14-264-1567
Open End Wrench

142641567
10A1 3-4: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-485-0321
Patin D'appui

144850321
CMV9-70: RNCC: 3 | RNVC: 2

19 Dec 1996

5120-14-402-4113
Torque Wrench Adapter

144024113
MHB107-22: RNCC: 3 | RNVC: 2

3 Jul 1985

5120-14-222-1648

5120-14-298-2656

5120-14-302-5106
Pion De Tarage

143025106
NO PRIMARY REF14-302-5106: RNCC: 3 | RNVC: 2
42-25-04-068: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-419-2742
Cle Speciale

144192742
540109: RNCC: 3 | RNVC: 2

16 Oct 1987

5120-14-366-9421
Blacksmith's Anvil

143669421
2090: RNCC: 3 | RNVC: 2

11 Dec 1980

5120-14-422-2409
Socket Wrench Spanner Attachment

144222409
0373-0U115055: RNCC: 3 | RNVC: 2

24 Feb 1988

5120-14-539-5096
Wrench Kit

145395096
1104195N01: RNCC: 3 | RNVC: 2

22 Jan 2004

5120-14-375-8054
Spanner Wrench

143758054
300C90058: RNCC: 3 | RNVC: 2
91372598: RNCC: 5 | RNVC: 2
300C90058: RNCC: 5 | RNVC: 2
300C90058: RNCC: 5 | RNVC: 9
300C90058: RNCC: 5 | RNVC: 9

30 Mar 1982

5120-14-558-3382
Socket Wrench Set

145583382
S.423AP: RNCC: 3 | RNVC: 2

23 Sep 2008

5120-14-517-3795
Retaining Ring Pliers

145173795
0XB101-681-801-26: RNCC: 3 | RNVC: 2

8 Dec 1999

5120-14-472-2483
Handling Tool Arm

144722483
A03037-00S101: RNCC: 3 | RNVC: 2
A03037-00S101P001: RNCC: 5 | RNVC: 2

12 Oct 1994

5120-14-378-5566
Spanner Wrench

143785566
6801P32-1163-20: RNCC: 3 | RNVC: 2
6801365A32-1163-20: RNCC: 5 | RNVC: 2

11 Aug 1982

5120-14-271-0979

5120-14-563-6344
Flat Tip Screwdriver

145636344
AW8X200: RNCC: 3 | RNVC: 2

2 Mar 2010

144925979
5516017578: RNCC: 3 | RNVC: 2
F300 0T 008 1327: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-397-7233

5120-14-352-3188
Serrage Palier Cle

143523188
MHJ288-22: RNCC: 3 | RNVC: 2
MHJ288-22: RNCC: 5 | RNVC: 2

16 Oct 1978

5120-14-400-6250
Open End Wrench

144006250
69-120: RNCC: 3 | RNVC: 2
3272670217744: RNCC: 5 | RNVC: 2

8 May 1985

5120-14-222-1653

5120-14-241-6054

5120-14-490-8700
Rabot

144908700
4061 443 111 048: RNCC: 3 | RNVC: 2
F300 0T 000 4939: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-321-6316
Embout Amort Adapta

143216316
C47290: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-454-9432
Hand Screw Starter

144549432
005050: RNCC: 3 | RNVC: 2
3148510050508: RNCC: 5 | RNVC: 2
AFE1: RNCC: 5 | RNVC: 2
244-064: RNCC: 5 | RNVC: 2
AFE.1: RNCC: 5 | RNVC: 2
0235746R00: RNCC: 5 | RNVC: 2
FACOMAFE.1: RNCC: 5 | RNVC: 9

29 Apr 1992

5120-14-454-3292
Cle A Creneaux

144543292
NO PRIMARY REF14-454-3292: RNCC: 3 | RNVC: 2
601653: RNCC: 5 | RNVC: 9

1 Apr 1992

5120-14-538-0472
Screwdriver Bit

145380472
EXR.110: RNCC: 3 | RNVC: 2
3148510258812: RNCC: 5 | RNVC: 2

9 Dec 2003

5120-14-468-9160
Hand Tube Flaring Tool

144689160
530200885: RNCC: 3 | RNVC: 2

28 Mar 1994

5120-14-534-0871
Bearing And Bushing Inserter

145340871
713037: RNCC: 3 | RNVC: 2

12 Mar 2003

5120-14-551-7906
Impact Type Bit Set And Handle Screwdriver

145517906
NA.1002E: RNCC: 3 | RNVC: 2

24 Oct 2006

5120-14-508-3283
Screwdriver Bit

145083283
ES.648: RNCC: 3 | RNVC: 2
0024825: RNCC: 5 | RNVC: 2
1069249F00: RNCC: 5 | RNVC: 2

4 Sep 1998

5120-14-302-2120

5120-14-371-5365
Outill Releve Cotes

143715365
8814030000: RNCC: 3 | RNVC: 2

5 Aug 1981

5120-14-532-9627
Combination Box And Open End Wrench

145329627
40R.9: RNCC: 3 | RNVC: 2
3148511011812: RNCC: 5 | RNVC: 2
40R.9: RNCC: 5 | RNVC: 2

14 Jan 2003

5120-14-228-5209

5120-14-216-4112
Broche Speciale

142164112
M3-026-101: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-241-6312
Extracteur Axe Arri

142416312
1050-95-507-00: RNCC: 3 | RNVC: 2
95-507-00: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-529-8979
Bearing And Bushing Inserter

145298979
TO/A33000403: RNCC: 3 | RNVC: 2

17 Apr 2002

5120-14-407-5111
Phare Demontage Cle

144075111
71770: RNCC: 3 | RNVC: 2

27 Feb 1986

5120-14-200-7544

5120-14-250-5173

5120-14-313-8866
Chargeur De Joints

143138866
0M429: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-230-6673

5120-14-375-3212
Cylindre Extracteur

143753212
A33286F: RNCC: 3 | RNVC: 2

26 Feb 1982

5120-14-377-3006
Montage Bague

143773006
MG010-23-00: RNCC: 3 | RNVC: 2
MG010-23-00: RNCC: 5 | RNVC: 2

17 May 1982

5120-14-325-4775
Guide Montage Joint

143254775
NOREF143244775: RNCC: 3 | RNVC: 2
184569: RNCC: 5 | RNVC: 9

2 Jul 1975

5120-14-220-8465
Adjustable Wrench

142208465
BBW155: RNCC: 3 | RNVC: 9

1 Jan 1965

5120-14-549-2241
Adjustable Wrench

145492241
1102719: RNCC: 3 | RNVC: 2

13 Mar 2006

5120-14-545-6324
Extracteur De Pieu

145456324
153618: RNCC: 3 | RNVC: 2

26 Apr 2005

5120-14-349-2781
Pose Joint Mandrin

143492781
M2D353185C1: RNCC: 3 | RNVC: 2

22 May 1978

5120-14-313-8803
Spanner Wrench

143138803
M2-055-1: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-365-1642

5120-14-289-8689

5120-14-286-7856

5120-14-411-3922
Sertissage Outil

144113922
DA17182: RNCC: 3 | RNVC: 2
DA17182: RNCC: 5 | RNVC: 2

6 Aug 1986

5120-14-462-3767
Socket Head Screw Key

144623767
T20-13I2A9: RNCC: 3 | RNVC: 2
517825: RNCC: 5 | RNVC: 2

15 Apr 1993

5120-14-278-4677
Chasse Serre-Cable

142784677
163051: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-375-1785
Cone Demmanchement

143751785
16380361: RNCC: 3 | RNVC: 2
16380361: RNCC: 5 | RNVC: 9

26 Feb 1982

5120-14-413-7823
Mont Ressort Outil

144137823
82406831: RNCC: 3 | RNVC: 2

15 Jan 1987

5120-14-253-6463
Outillage Sertissag

142536463
0103-78: RNCC: 3 | RNVC: 2
RA103: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-287-7447
Cle De Serrage

142877447
RK5807REPA: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-282-1526
Embout De Cle

142821526
RT8061: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-234-6334

5120-14-348-4999
Ecrou Priso Sertiss

143484999
8812456000: RNCC: 3 | RNVC: 2

29 Mar 1978

5120-14-396-7147
Orientation Guide

143967147
C46539: RNCC: 3 | RNVC: 2

27 Nov 1984

5120-14-416-7489
Percage Support

144167489
537205: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-428-5266
Essai Support

144285266
MJK3912102: RNCC: 3 | RNVC: 2

8 Dec 1988

5120-14-204-9688
Chandelle Atelier

142049688
1822000: RNCC: 3 | RNVC: 2
3004: RNCC: 5 | RNVC: 2
FOE1822000: RNCC: 5 | RNVC: 9

1 Jan 1963

5120-14-289-1438

5120-14-401-6057
Monte-Joint

144016057
NO PRIMARY REF14-401-6057: RNCC: 3 | RNVC: 2
0U141301: RNCC: 5 | RNVC: 9
OU141301: RNCC: 5 | RNVC: 9

13 Jun 1985

5120-14-438-5062
Spanner Wrench

144385062
J47978: RNCC: 3 | RNVC: 2
85-694-0779: RNCC: 6 | RNVC: 9

21 Mar 1990

5120-14-375-3099
Douille De Blocage

143753099
CRAR981: RNCC: 3 | RNVC: 2

26 Feb 1982

5120-14-308-5435
Spanner Wrench

143085435
BL42043: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-535-7707
Cross Tip Screwdriver

145357707
APYB.1X100VE: RNCC: 3 | RNVC: 2
APYB.1X100VE: RNCC: 5 | RNVC: 2

25 Jun 2003

5120-14-217-4929
Cle Verin Aerofrein

142174929
PR46023: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-503-4655
Electronic Component Inserter And Remover

145034655
29339644: RNCC: 3 | RNVC: 2

14 Jan 1998

5120-14-492-2734
Tournevis

144922734
0023278528: RNCC: 3 | RNVC: 2
F300 0T 007 2790: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-226-4430

5120-14-225-8927

5120-14-468-2186
Craftsman's Tweezers

144682186
150.P1: RNCC: 3 | RNVC: 2
138470: RNCC: 5 | RNVC: 2
3148511384701: RNCC: 5 | RNVC: 2
0138470: RNCC: 5 | RNVC: 9

14 Feb 1994

5120-14-410-3599
Bearing And Bushing Inserter And Remover

144103599
8812828000: RNCC: 3 | RNVC: 2

18 Jun 1986

5120-14-247-9814

5120-14-284-6189
Open End Wrench

142846189
BB84: RNCC: 3 | RNVC: 9

1 Jan 1972

5120-14-437-9395
Spanner Wrench

144379395
100958: RNCC: 3 | RNVC: 2
C63127: RNCC: 5 | RNVC: 2

28 Feb 1990

5120-14-247-8209

5120-14-228-5128

5120-14-395-4209

5120-14-335-7363
Spanner Wrench

143357363
842874-79: RNCC: 3 | RNVC: 2

30 Jun 1976

5120-14-576-1356
Torque Wrench Adapter

145761356
62902-FH385-0000: RNCC: 3 | RNVC: 2

31 May 2013

5120-14-210-9882
Open End Wrench

142109882
44.33X35: RNCC: 3 | RNVC: 2
3330665: RNCC: 5 | RNVC: 2
3148511024812: RNCC: 5 | RNVC: 2
44-33X35: RNCC: 5 | RNVC: 2
0174545P00: RNCC: 5 | RNVC: 2
MUP6167: RNCC: 5 | RNVC: 2
91369672: RNCC: 5 | RNVC: 2
0102481: RNCC: 5 | RNVC: 9
33-33X35: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-200-8156
Socket Head Screw Key

142008156
E74331-17NL: RNCC: 2 | RNVC: 2
82.17: RNCC: 3 | RNVC: 2
62-17: RNCC: 3 | RNVC: 2
190-17: RNCC: 3 | RNVC: 9
203443: RNCC: 5 | RNVC: 2
0123170: RNCC: 5 | RNVC: 2
82-17: RNCC: 5 | RNVC: 2
3272670219588: RNCC: 5 | RNVC: 2
91367182: RNCC: 5 | RNVC: 2
DEM190-17: RNCC: 5 | RNVC: 9

1 Jan 1962

5120-14-431-2578
Spanner Wrench

144312578
332A93-3126-01: RNCC: 3 | RNVC: 2
F300 0T 009 9439: RNCC: 5 | RNVC: 9

12 Apr 1989

5120-14-486-4459
Cle Speciale

144864459
RT13625: RNCC: 3 | RNVC: 2

21 Mar 1997

5120-14-461-3325
Tendeur Boulon

144613325
20647M33: RNCC: 3 | RNVC: 2

8 Mar 1993

5120-14-490-8903
Lame

144908903
4067 200 000 480: RNCC: 3 | RNVC: 2
F300 0T 000 5177: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-490-8706
Meche

144908706
4061 551 130 100: RNCC: 3 | RNVC: 2
F300 0T 000 4946: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-379-2105

5120-14-285-6285

5120-14-490-8882
Filiere

144908882
4067 170 000 406: RNCC: 3 | RNVC: 2
F300 0T 000 5154: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-433-1399
Bearing And Bushing Inserter And Remover

144331399
45152550: RNCC: 3 | RNVC: 2

11 Jul 1989

5120-14-401-2641
Socket Head Screw Key

144012641
101173: RNCC: 3 | RNVC: 2

5 Jun 1985

5120-14-419-9313
Bearing And Bushing Inserter

144199313
10584: RNCC: 3 | RNVC: 2
10584: RNCC: 5 | RNVC: 9

10 Nov 1987

5120-14-560-8696
Flat Tip Screwdriver

145608696
A3,5X100VE: RNCC: 3 | RNVC: 2
123M7266: RNCC: 5 | RNVC: 2
3148517745834: RNCC: 5 | RNVC: 2

27 May 2009

5120-14-320-2512
Spanner Wrench

143202512
454709: RNCC: 3 | RNVC: 2
4709: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-280-9678

5120-14-511-5891
Six Point Tip Screwdriver

145115891
ACZX.27X125: RNCC: 3 | RNVC: 2
AZXH.27X125: RNCC: 5 | RNVC: 2
0613 256 27: RNCC: 5 | RNVC: 2
0613 255 27: RNCC: 5 | RNVC: 2
3148510134758: RNCC: 5 | RNVC: 2
13475: RNCC: 5 | RNVC: 2

6 Jan 1999

5120-14-551-0072
Hand Tube Swaging Tool Kit

145510072
F47133: RNCC: 3 | RNVC: 2

18 Aug 2006

5120-14-539-2643
Mechanical Puller Attachment

145392643
T632G3015221: RNCC: 3 | RNVC: 2

17 Dec 2003

5120-14-490-0608
Fixed Open End Wrench Set

144900608
44.JE9: RNCC: 3 | RNVC: 2
3148515302206: RNCC: 5 | RNVC: 2
0530220: RNCC: 5 | RNVC: 2

10 Sep 1997

5120-14-333-3854

5120-14-333-3892

5120-14-283-2505

5120-14-570-4089
Mechanical Puller

145704089
62020685AA: RNCC: 3 | RNVC: 2

14 Dec 2011

5120-14-463-7661
Manchon

144637661
428385Z: RNCC: 3 | RNVC: 2
M35735: RNCC: 5 | RNVC: 2

29 Jun 1993

5120-14-440-2925
Mechanical Puller Adapter

144402925
5000262070: RNCC: 3 | RNVC: 2
89409895: RNCC: 5 | RNVC: 2

11 Jul 1990

5120-14-359-0603
Socket Wrench Handle

143590603
160-888434: RNCC: 3 | RNVC: 2

7 Sep 1979

5120-14-226-0022

5120-14-225-3997

5120-14-240-0121
Plaque Coulissante

142400121
B0044BB52AREP3: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-280-4130
Montage De Goupille

142804130
C55675: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-303-3870

5120-14-265-0910
Outil Axe Battement

142650910
330A98-2037-00: RNCC: 3 | RNVC: 2
330A98-2037-0000: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-541-8992
Screwdriver Bit

145418992
61399228AA: RNCC: 3 | RNVC: 2

2 Jul 2004

5120-14-207-5145

5120-14-272-3747

5120-14-222-1443
Offset Screwdriver

142221443
224-4: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-264-1571
Open End Wrench

142641571
10A2 1-2: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-444-8314
Spanner Wrench

144448314
0478-203126: RNCC: 3 | RNVC: 2

23 Jan 1991

5120-14-567-9637
Face Spanner Wrench Socket

145679637
261181663: RNCC: 3 | RNVC: 2

29 Apr 2011

5120-14-245-1757
Obus De Protection

142451757
G1-15-638: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-377-2999
Spanner Wrench

143772999
MH010-22-00: RNCC: 3 | RNVC: 2
MH010-22-00: RNCC: 5 | RNVC: 2

17 May 1982

5120-14-389-9776
Outil D'installatio

143899776
065U20-642811D: RNCC: 3 | RNVC: 2

26 Jan 1984

5120-14-457-9939
Seal Inserter And Remover

144579939
547980: RNCC: 3 | RNVC: 2

2 Oct 1992

5120-14-283-4943
Spanner Wrench

142834943
306984: RNCC: 3 | RNVC: 2
306984: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-325-6121
Electrical Card Extractor

143256121
474016: RNCC: 3 | RNVC: 2
TID19423: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-244-4202
Socket Head Screw Key

142444202
128110BISD: RNCC: 3 | RNVC: 2
128110BISD: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-465-9542
Face Spanner Wrench Socket

144659542
62000004: RNCC: 3 | RNVC: 2

22 Oct 1993

5120-14-384-6298
Electrical Card Extractor

143846298
16928948: RNCC: 3 | RNVC: 2
16928948: RNCC: 5 | RNVC: 9

2 Jun 1983

5120-14-227-8925
Offset Screwdriver

142278925
35-49: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-570-2314
Face Spanner Wrench Socket

145702314
UFA31653: RNCC: 3 | RNVC: 2

30 Nov 2011

5120-14-498-7128
Cle

144987128
703603: RNCC: 3 | RNVC: 2
703603: RNCC: 5 | RNVC: 9
F300 0T 008 2022: RNCC: 6 | RNVC: 9

29 Oct 1997

5120-14-243-7478

5120-14-266-4911
Cliquet Carre

142664911
A5125: RNCC: 3 | RNVC: 2
A5125: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-417-7385
Filetee Broche

144177385
MLA1460207: RNCC: 3 | RNVC: 2
MLA1460207: RNCC: 5 | RNVC: 2

22 Jul 1987

5120-14-491-0245
Serre-Joint

144910245
4602 013 300 005: RNCC: 3 | RNVC: 2
F300 0T 001 1042: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-416-7567
Maintien Outil

144167567
537412: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-452-9118
Outillage Dudgeonna

144529118
15189540V: RNCC: 3 | RNVC: 2

27 Jan 1992

5120-14-303-5919

5120-14-362-4019
Spanner Wrench

143624019
095002: RNCC: 3 | RNVC: 2
095002N: RNCC: 5 | RNVC: 2

19 Mar 1980

5120-14-539-4402
Spring Inserter And Remover

145394402
D.117A: RNCC: 3 | RNVC: 2

14 Jan 2004

5120-14-401-9303
Grip-Fil

144019303
451MJ001-4: RNCC: 3 | RNVC: 9

18 Jun 1985

5120-14-228-5202

5120-14-420-9054
Tire-Cable

144209054
T13-4729: RNCC: 3 | RNVC: 2

4 Jan 1988

5120-14-538-3213
Solid Center Punch

145383213
NGM0010035824618: RNCC: 2 | RNVC: 2

9 Dec 2003

5120-14-570-6939
Screw Thread Insert Inserter

145706939
7488850086: RNCC: 1 | RNVC: 2
610 000 120: RNCC: 3 | RNVC: 2

18 Jan 2012

5120-14-237-0511

5120-14-300-9658
Mechanical Puller Attachment

143009658
341A93-3512-22: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-235-8660

5120-14-232-2174

5120-14-545-9829
Combination Box And Open End Wrench

145459829
40.1'1/8: RNCC: 3 | RNVC: 2
40.1'1/8: RNCC: 5 | RNVC: 2

1 Jun 2005

5120-14-447-3459
Bearing And Bushing Inserter And Remover

144473459
U.49D3: RNCC: 3 | RNVC: 2
U.49 D3: RNCC: 5 | RNVC: 2
U49D3: RNCC: 5 | RNVC: 2
91718972: RNCC: 5 | RNVC: 2
3148510702346: RNCC: 5 | RNVC: 2
0070234: RNCC: 5 | RNVC: 9

15 May 1991

5120-14-423-2819
Socket Wrench Socket

144232819
K.27LA: RNCC: 3 | RNVC: 2
3148510301556: RNCC: 5 | RNVC: 2
K27LA: RNCC: 5 | RNVC: 2
91626503: RNCC: 5 | RNVC: 2
0030155: RNCC: 5 | RNVC: 9

14 Apr 1988

5120-14-216-4100
Cle Speciale

142164100
M3-062: RNCC: 3 | RNVC: 2
M3-062: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-280-6119
Cambreur

142806119
HK1-35: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-569-5778
Spatula

145695778
RS-FS-0020: RNCC: 3 | RNVC: 2

29 Sep 2011

5120-14-216-4103
Cle Speciale

142164103
M3-075: RNCC: 3 | RNVC: 2
M3-075: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-454-9373
Cle Sans Embout

144549373
053109: RNCC: 3 | RNVC: 2
R.309D: RNCC: 3 | RNVC: 2

29 Apr 1992

5120-14-234-4245
Cle Pour Vis Creuse

142344245
17926T1REP3: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-200-8140
Carpenters' Pincers

142008140
E73-160-190DEMI-FINES: RNCC: 2 | RNVC: 2
E73-160-190MENUISIER: RNCC: 5 | RNVC: 2
E73-101-19: RNCC: 5 | RNVC: 9

1 Jan 1962

5120-14-256-5097
Flat Tip Screwdriver

142565097
900/36: RNCC: 3 | RNVC: 2
900-36: RNCC: 5 | RNVC: 2

1 Jan 1969

5120-14-288-6987
Bague De Position

142886987
D1553-4828: RNCC: 3 | RNVC: 2
D1553-4828: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-393-0738
Cle Des Coffrets

143930738
A02060-00-0000P003: RNCC: 3 | RNVC: 2

12 Apr 1984

5120-14-485-4019
Screwdriver Bit

144854019
SE-252: RNCC: 3 | RNVC: 2
SE252: RNCC: 3 | RNVC: 2
3272670270442: RNCC: 5 | RNVC: 2

23 Jan 1997

5120-14-317-7957
Outillage De Graiss

143177957
NO PRIMARY REF14-317-7957: RNCC: 3 | RNVC: 2
800607-79: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-443-8026
Flasque Darret

144438026
D12502-040-02: RNCC: 3 | RNVC: 2

5 Dec 1990

5120-14-396-7176
Appui Piece

143967176
C46558: RNCC: 3 | RNVC: 2

27 Nov 1984

5120-14-327-0844
Tige Daccord Embout

143270844
1066019: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-338-4739

5120-14-308-9224
Mandrin Pose Bague

143089224
186638: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-445-7058
Torque Wrench Adapter

144457058
10.11/16: RNCC: 3 | RNVC: 2
3148510926254: RNCC: 5 | RNVC: 2
0092625: RNCC: 5 | RNVC: 9

22 Feb 1991

5120-14-253-3691
Semelle Pour Levier

142533691
410244M: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-314-8606

5120-14-318-6220
Spanner Wrench

143186220
C46332: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-234-3682
Appareil Emmancheme

142343682
202500: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-493-1353
Socket Head Screw Key Set

144931353
7594: RNCC: 3 | RNVC: 2
F300 0T 010 4881: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-325-0286
Regu Vis De Reg Cle

143250286
0S21793: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-223-9304

5120-14-276-3067
Socket Wrench Socket

142763067
M50: RNCC: 3 | RNVC: 2
M-50: RNCC: 3 | RNVC: 2
M50: RNCC: 3 | RNVC: 2
T50: RNCC: 3 | RNVC: 9
3148510317205: RNCC: 5 | RNVC: 2
3272670249103: RNCC: 5 | RNVC: 2
DEMT50: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-216-3257
Wrench Kit

142163257
8810275000: RNCC: 3 | RNVC: 2
881-0-275-000: RNCC: 5 | RNVC: 2

1 Jan 1965

5120-14-220-7917
Open End Wrench

142207917
RACC12: RNCC: 3 | RNVC: 2
RACC12: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-447-9982
Face Spanner Wrench Socket

144479982
A37616M: RNCC: 3 | RNVC: 2

12 Jun 1991

5120-14-391-5390
Cle Special

143915390
065U20-623275Y: RNCC: 3 | RNVC: 2

21 Mar 1984

5120-14-280-4166
Cle Speciale

142804166
A122493: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-263-2678

5120-14-399-9167
Coffret Amenage

143999167
F52208-1: RNCC: 3 | RNVC: 2

24 Apr 1985

5120-14-303-8957
Open End Wrench

143038957
13 7-16X1-2: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-576-6311
Mechanical Puller S

145766311
8812337003: RNCC: 3 | RNVC: 2

2 Jul 2013

5120-14-232-9931
Matrice De Sertissa

142329931
45158-2: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-283-1684
Cle Speciale

142831684
761-3M735P17: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-237-5601
Bague Montage Injec

142375601
60290-01-11M1: RNCC: 3 | RNVC: 2
60290-01-110M1: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-569-8411
Spanner Wrench

145698411
712391-01: RNCC: 3 | RNVC: 2

24 Oct 2011

5120-14-404-9666

5120-14-399-3428
Hydrauli Extracteur

143993428
46AM081: RNCC: 3 | RNVC: 2

6 Mar 1985

5120-14-371-5660

5120-14-343-1833
Pose Filet Rapp Nez

143431833
01500614032: RNCC: 3 | RNVC: 2
01556140021: RNCC: 5 | RNVC: 2

16 Jun 1977

5120-14-559-0969
Hand Hammer

145590969
1SH41585401: RNCC: 3 | RNVC: 2

4 Dec 2008

5120-14-397-6730

5120-14-227-3133
Capuchon

142273133
941714: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-260-2338

5120-14-436-0202
Cle Maintien Pignon

144360202
RT32929: RNCC: 3 | RNVC: 2

29 Nov 1989

5120-14-474-7501
Mechanical Puller Step Plate

144747501
45057265: RNCC: 3 | RNVC: 2
45057265: RNCC: 5 | RNVC: 9

1 Mar 1995

5120-14-280-0534
Spanner Wrench

142800534
CZ53703: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-419-0521
Hand Terminal Crimping Tool

144190521
8458A: RNCC: 3 | RNVC: 2
91492562: RNCC: 5 | RNVC: 2

30 Sep 1987

5120-14-433-3249
Outillage Mandrin

144333249
536793: RNCC: 3 | RNVC: 2
00536793: RNCC: 5 | RNVC: 2

19 Jul 1989

5120-14-424-1829
Couteau A Mastiquer

144241829
NO PRIMARY REF14-424-1829: RNCC: 3 | RNVC: 2
1339/114: RNCC: 5 | RNVC: 9

19 May 1988

5120-14-416-5685
Open End Wrench

144165685
20-1: RNCC: 3 | RNVC: 2
20-16/16: RNCC: 5 | RNVC: 2
3148510940809: RNCC: 5 | RNVC: 2
85-801-2474: RNCC: 6 | RNVC: 9

18 Jun 1987

5120-14-215-9631
Cle A Panier Hexago

142159631
773-411-003F5-33SURPLATS: RNCC: 3 | RNVC: 2
773-411-003FF5-33SURPLATS: RNCC: 5 | RNVC: 9
773-411-003F5-33SURPLATS: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-428-7137
Socket Wrench Screwdriver Attachment

144287137
RT.8: RNCC: 3 | RNVC: 2
3148515141904: RNCC: 5 | RNVC: 2
0514190: RNCC: 5 | RNVC: 2
RT8: RNCC: 5 | RNVC: 2
TVA5120-2-263-037-1.1.8: RNCC: 5 | RNVC: 2

13 Dec 1988

5120-14-433-3189
Bearing And Bushing Remover

144333189
853-202-750-0: RNCC: 3 | RNVC: 2

19 Jul 1989

5120-14-436-0221
Preformed Packing Inserter

144360221
807614: RNCC: 3 | RNVC: 2

29 Nov 1989

5120-14-373-6767
Socket Head Screw Key

143736767
225772: RNCC: 3 | RNVC: 2

13 Nov 1981

5120-14-543-2977
Pliers

145432977
UA.444A: RNCC: 3 | RNVC: 2

16 Oct 2004

5120-14-475-9992
Spanner Wrench

144759992
2601405: RNCC: 3 | RNVC: 2

17 May 1995

5120-14-366-1027
Electrical Card Extractor

143661027
26429122: RNCC: 3 | RNVC: 2
26429122: RNCC: 3 | RNVC: 9

4 Nov 1980

5120-14-541-1171
Socket Head Screw Key

145411171
0124897: RNCC: 3 | RNVC: 2
83S.5L: RNCC: 3 | RNVC: 2

14 May 2004

5120-14-422-3072

5120-14-212-9090
Emmanche-Joint Tori

142129090
9970-115-182: RNCC: 3 | RNVC: 2
9970-115-182-00: RNCC: 3 | RNVC: 2

1 Jan 1964

5120-14-208-7298

5120-14-506-3975
Jeu De Fourches

145063975
4082T: RNCC: 3 | RNVC: 2
OUT504082T: RNCC: 5 | RNVC: 2

22 Apr 1998

5120-14-519-4579
Outillage D'extract

145194579
141119320: RNCC: 3 | RNVC: 2

21 Mar 2000

5120-14-559-2249
Flat Tip Screwdriver

145592249
7421045672: RNCC: 3 | RNVC: 2

15 Dec 2008

5120-14-561-8096
Flat Tip Screwdriver

145618096
GF 0808: RNCC: 3 | RNVC: 2

8 Sep 2009

5120-14-229-2623
Ajoute Ou Tire Roue

142292623
VTR250-10250: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-392-0527
Spanner Wrench

143920527
MHJ373-21: RNCC: 3 | RNVC: 2

21 Mar 1984

5120-14-232-9172
Poussoir Special

142329172
58873: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-464-4898
Rivetage Adaptation

144644898
851-910-062-0: RNCC: 3 | RNVC: 2

4 Aug 1993

5120-14-528-0678
Socket Head Screw Key

145280678
888-477-600-1: RNCC: 3 | RNVC: 2

12 Dec 2001

5120-14-285-3549

5120-14-371-7640

5120-14-040-2926
Tige Dextraction

140402926
RT8834: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-425-9633
Cle De Montage Spec

144259633
6180: RNCC: 3 | RNVC: 2

28 Jul 1988

5120-14-463-3124
Outil Test Circ Sta

144633124
26-455: RNCC: 3 | RNVC: 2

9 Jun 1993

5120-14-238-6662

5120-14-240-4787

5120-14-491-0231
Plateau

144910231
4602 012 400 004: RNCC: 3 | RNVC: 2
F300 0T 001 1028: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-427-2011
Open End Wrench

144272011
46AM003-00-0001: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-365-0730

5120-14-280-1436

Load More Results