What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.

A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Blacksmith's Punch?

A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Mechanical Finger?

A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.

A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Screwdriver And Wrench Assembly?

A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Stakeholder Bench Plate?

A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.

What is a Drill Drift?

A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.

A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Digging Bar?

A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

What is a Valve Spring Lifter?

A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.

What is a Fuse Puller?

A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.

Hand Tools, Nonedged, Nonpowered - France (FR)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by France (FR) - NCB is 14

Page 45 of 110

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by France

51	20	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - France (FR)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 16 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Pipe Vise? 19 Items: A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.
What is a Hand Vise? 25 Items: A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.
What is a Hand Hydraulic Jack? 133 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 153 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 903 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 17 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
Swage,Bottom,Blacksmith's 10 Items
What is a Hand Tube Flaring Tool? 23 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Blacksmith's Punch? 12 Items: A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.
What is a Drain Plug Wrench? 45 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 57 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 16 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 3829 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
Flatter,Blacksmith's 18 Items
Swage,Top,Blacksmith's 12 Items
What is a Pipe Wrench? 110 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 149 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 53 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
Screwdriver,Offset 54 Items
What is a Screwdriver Bit? 707 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Mechanical Finger? 25 Items: A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.
What is a Socket Wrench Socket? 1803 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 1412 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 1641 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 52 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 565 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
Jack,Push-Pull,Screw 30 Items
What is a Hand Tube Bender? 54 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 1106 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 55 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pinch Bar? 19 Items: A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.
What is a Pry Bar? 17 Items: A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.
What is a Wrecking Bar? 15 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 273 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 413 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 32 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 295 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
Face,Hammer,Inserted 25 Items
What is a Hole Sheet Metal Holder? 37 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Screwdriver And Wrench Assembly? 11 Items: A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.
What is a Hand Rivet Set? 121 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Stakeholder Bench Plate? 22 Items: A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.
What is a Drill Drift? 32 Items: A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.
What is a Tack Claw? 15 Items: A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.
Mattock 28 Items
What is a Socket Wrench Handle Bar? 108 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Stake,Sheet Metalworking 50 Items
Riveter,Blind,Hand 76 Items
What is a Hand Shovel? 43 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 98 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 30 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
What is a Digging Bar? 20 Items: A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.
Block,Dolly,Sheet Metalworking 56 Items
What is a Piston Ring Compressor? 34 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Valve Spring Lifter? 29 Items: A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.
What is a Fuse Puller? 20 Items: A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.
What is a Hand Lead Seal Press? 18 Items: A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.
What is a Hand Beading Tool? 91 Items: A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.
What is a Hand Hammer? 502 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
Head,Hand Hammer 81 Items
What is a Lamp Extractor? 76 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Tube Packing Ring Installing Tool? 29 Items: A Tube Packing Ring Installing Tool (INSTALLING TOOL,TUBE PACKING RING) is an item designed to insert packing rings on tubes within tube sheets on condensers and similar heat exchangers. In operation, the packing rings are assembled on the loading pin mandrel and are then transferred from the mandrel on to the tube by means of a tubular sleeve which slides on the mandrel.
What is a Carpenters' Pincers? 18 Items: A Carpenters' Pincers (PINCERS,CARPENTERS') is a plierlike hand tool having two opposing jaws which may have hammerlike backs. One handle has a nail or tack pulling claw, the other is shaped to form a screwdriver. The tool may contain a wire cutter. See also NIPPERS, END CUTTING and PINCERS, FARRIERS'.
What is a Trowel? 33 Items: A Trowel is a tool used for bricklaying, concrete work, plastering, linoleum laying, and masonry work. Excludes CORNER TOOL, CONCRETE.
What is a Hand Abrasive Wheel Dresser? 12 Items: A Hand Abrasive Wheel Dresser (DRESSER,ABRASIVE WHEEL,HAND) is a tool designed to remove glaze from, dress, shape, sharpen, and true solid abrasive wheels. Excludes NIB, DIAMOND, WHEEL DRESSING.
What is a Lamp Cap Extractor? 32 Items: A Lamp Cap Extractor (EXTRACTOR,LAMP CAP) is a tool specifically designed to facilitate the removal of lamp caps from switchboards, panels or indicator lamps.
What is a Rivet Bucking Bar? 51 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 86 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 277 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Woven Cable Grip? 23 Items: A Woven Cable Grip (GRIP,CABLE,WOVEN) is a braided wire device designed to clutch a bare or insulated conductor, cable or wire rope, for holding taut or drawing through conduit.
What is a Screw Thread Insert Extractor? 19 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is an Electron Tube Extractor? 18 Items: An Electron Tube Extractor (EXTRACTOR,ELECTRON TUBE) is a hand tool designed to facilitate the removal of electron tubes from electronic equipment and to avoid burning the fingers. It may be used for installing tubes.
What is a Cross Tip Screwdriver? 362 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 21 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 11 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 37 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Tool Handle Wedge? 10 Items: A Tool Handle Wedge (WEDGE,TOOL HANDLE) is excludes WEDGE, WOOD.
What is a Marlinespike? 16 Items: A Marlinespike is a metal hand tool made in the shape of a tapered pin. One end is pointed and the opposite end may be headed. The body may contain an eye for a lanyard sling, or be grooved lengthwise. Excludes CABLE PICK and FID.
What is an Aligning Punch? 272 Items: An Aligning Punch (PUNCH,ALIGNING) is a round, square, hexagonal or octagonal bodied hand tool, having a round tapered section 6-1/2 inches (165.1 mm) or more in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, DRIFT and DRIFTPIN.
What is a Drift Punch? 25 Items: A Drift Punch (PUNCH,DRIFT) is a round, square, hexagonal, or octagonal bodied hand tool, having a round tapered section 4 to 6 inches (101.6 mm to 152.4 mm) inclusive in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, ALIGNING; and DRIFTPIN.
What is a Putty Knife? 36 Items: A Putty Knife (KNIFE,PUTTY) is a hand tool with a nonedged blade fixed to a handle for laying on and smoothing putty and the like.
What is a Socket Wrench Adapter-Extension? 40 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 30 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 184 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Socket Wrench Ratchet Attachment? 47 Items: A Socket Wrench Ratchet Attachment (RATCHET ATTACHMENT,SOCKET WRENCH) is a connection for socket wrenches and handles. Consists of a ratcheting mechanism with an internal drive on one end and an external drive on the opposite end of the same size. The item is designed to permit continuous rotation of the socket in one direction without removing the socket or handle and without a complete rotation of the handle.
What is a Wrench Extension Handle? 81 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Socket Wrench Crowfoot Attachment? 155 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 33 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 43 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 48 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 2394 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 372 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 300 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 661 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 32 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand-Operated Grommet And Eyelet Press? 12 Items: A Hand-Operated Grommet And Eyelet Press (PRESS,GROMMET AND EYELET,HAND-OPERATED) is a device which punches or pierces holes and in addition fastens or sets eyelets and grommets in cloth, paper and similar material. May be used for fastening or setting rivets, lacing hooks and snaps in cloth, paper and similar material. It is hand operated by lever or screw action. See also PUNCH, EYELET, PLIER TYPE and PRESS, GROMMET AND EYELET, FOOT OPERATED.
What is a Claw Bar? 19 Items: A Claw Bar (BAR,CLAW) is before using, refer to Reference Drawing Group AG.
What is a Shock Type Wheel Stud Nut Wrench? 11 Items: A Shock Type Wheel Stud Nut Wrench (WRENCH,WHEEL STUD NUT,SHOCK TYPE) is a manually operated item designed to remove wheel stud nuts. In operation the inner nut is turned by a socket attached to a shaft on which is a loose swinging weighted handle. The weighted handle may be swung quickly to provide an impact force against the socket to loosen the seized or jammed nuts. The outer nut is held stationary by a separate hexagonal holding wrench.
What is a Drift Pin Set? 30 Items: A Drift Pin Set is a group of DRIFTPIN having different characteristics.
What is a Tire Iron? 25 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 115 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Blacksmith's Vise? 14 Items: A Blacksmith's Vise (VISE,BLACKSMITH'S) is a clamping device consisting of a mounting plate, one stationary and one manual screw actuated jaw and a supporting member extending downward from the stationary jaw to the floor. Designed to be mounted on a bench, table or the like. May include pipe holding jaws.
What is a Machinist's Vise? 64 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Clamp Base Bench Vise? 10 Items: A Clamp Base Bench Vise (VISE,BENCH,CLAMP BASE) is a clamping device consisting of a base, one stationary and one manual screw actuated jaw, and one or more guide bars or rods. Designed with an integral clamp for attaching to a bench, table, or the like. Does not include pipe holding jaws.
What is a Fixed Open End Wrench Set? 86 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Nail Set? 11 Items: A Nail Set is a round knurled, square, hexagonal or octagonal bodied hand tool having a round tapered section terminating in a cupped point. It is designed to set brad head nails below the surface by striking it a hammerlike blow. See also PUNCH, DRIVE PIN.
What is a Socket Wrench Set? 202 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is an Open End Box Wrench Set? 10 Items: An Open End Box Wrench Set (WRENCH SET,OPEN END BOX) is a group of WRENCH, OPEN END BOX having different characteristics.
What is a Combination Box And Open End Wrench Set? 72 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Box Wrench Set? 36 Items: A Box Wrench Set (WRENCH SET,BOX) is a group of box wrenches having different characteristics. It may include a HANDLE, EXTENSION WRENCH. See also WRENCH SET, COMBINATION, BOX AND OPEN END.
What is a Hot Line Stick? 26 Items: A Hot Line Stick is a hand tool consisting of a straight, round stick (pole) made of a suitable nonconductive material with a tool fixed to one end. The other end may be plain or have a butt mounting device fixed to it. Various types of attachments (hooks, rings, and bands) may be fixed to the body. It is designed for use in the repair and maintenance of live high voltage aerial lines. Excludes hot line sticks without heads.
Handle,Mattock-Pick 15 Items
What is a Wrench Kit? 73 Items: A Wrench Kit is an assortment of various types and sizes of wrenches such as SOCKET, SOCKET WRENCH; WRENCH, OPEN END, FIXED; WRENCH, BOX and the like. It may include adapter(s), ratchet(s) and the like. See also WRENCH SET (as modified.
What is a Brad Awl? 15 Items: A Brad Awl (AWL,BRAD) is a small, pointed tool used by shoemakers, saddlers, cabinetmakers, and the like for piercing small holes in wood, leather, and similar materials, and consists of a handle with a ferrule and a blade. The blade is round, terminating in a beveled, sharp straight edge and has a shank which passes through the center of the handle.
What is a Scratch Awl? 20 Items: A Scratch Awl (AWL,SCRATCH) is an item whose nominal length of blade is less than 4 inches (101.6 millimeters) and is provided with a nondetachable handle.
What is a Screw Extractor Set? 10 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 102 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
Jack,Scissors,Hand 26 Items
What is a Piston Ring Expander? 23 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
Mallet,Plastic 62 Items
Mallet,Rubber 10 Items
What is a Wood Mallet? 37 Items: A Wood Mallet (MALLET,WOOD) is excludes MALLET, CALKING; MALLET, HAWSING and MALLET, SERVING.
What is a Rack Bar Jack? 30 Items: A Rack Bar Jack (JACK,RACK BAR) is excludes JACK, BUMPER and JACK, REEL, HAND.
What is a Pneumatic Tire Valve Core Inserter And Remover? 14 Items: A Pneumatic Tire Valve Core Inserter And Remover (INSERTER AND REMOVER,PNEUMATIC TIRE VALVE CORE) is a bar of steel having a small cylindrical slotted end for removing or installing a valve core in a valve stem by a screwing motion. See also REPAIR TOOL, PNEUMATIC TIRE VALVE.
What is a Hand Tube Swaging Tool Kit? 20 Items: A Hand Tube Swaging Tool Kit (SWAGING TOOL KIT,TUBE,HAND) is a hand-operated noncutting tool consisting of one or more PUNCH, TUBE SWAGING, HAND and a tube flaring bar.
What is a Hand Tube Flaring Punch? 11 Items: A Hand Tube Flaring Punch (PUNCH,TUBE FLARING,HAND) is a noncutting tool having a shaped end or section designed to flare the ends of tubes. One type is designed to flare the ends of tubes against a tube sheet, and another to flare tube ends to mate with tube fittings. Includes punch components of FLARING TOOL, TUBE, HAND.
What is a Hose Strap Band Clamping Tool? 26 Items: A Hose Strap Band Clamping Tool (CLAMPING TOOL,STRAP BAND,HOSE) is an item designed to tension and lock metal straps around a rubber hose, and the like. It is also used to clamp and hold fittings therein.
What is a Mechanical Puller? 3073 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 470 Items
What is a Slip Joint Pliers? 84 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Brake Repair Pliers? 14 Items: A Brake Repair Pliers (PLIERS,BRAKE REPAIR) is a tool having jaws designed for use in brake repair operations, such as removing and replacing items such as keys, springs, and the like. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 226 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 12 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 81 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 56 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 15 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 11 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 29 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Cross Tip Screwdriver Set? 14 Items: A Cross Tip Screwdriver Set (SCREWDRIVER SET,CROSS TIP) is a group of SCREWDRIVER, CROSS TIP having different characteristics.
What is a Spanner Wrench Set? 18 Items: A Spanner Wrench Set (WRENCH SET,SPANNER) is a group of items under WRENCH, SPANNER having different characteristics.
What is a Drive Pin Punch Set? 31 Items: A Drive Pin Punch Set (PUNCH SET,DRIVE PIN) is a group of PUNCH, DRIVE PIN having different characteristics.
What is an Aligning Punch Set? 13 Items: An Aligning Punch Set (PUNCH SET,ALIGNING) is a group of PUNCH, ALIGNING having different characteristics. See also DRIFTPIN SET.
What is a Slugging Type Box Wrench Socket? 16 Items: A Slugging Type Box Wrench Socket (SOCKET,SLUGGING TYPE BOX WRENCH) is an item having a hexagonal external drive at one end, made to fit into the internal hexagonal or 12-point opening of a slugging type box wrench. The opposite end has a single-broached hexagonal opening of the same size as the external drive. The item is designed with extra thick walls to withstand the impact of sledge blows on the driving wrench.
What is a Mechanical Puller Step Plate? 44 Items: A Mechanical Puller Step Plate (STEP PLATE,MECHANICAL PULLER) is a circular disk, flanged to provide a shoulder, and designed to provide a base for the screw point of a PULLER, MECHANICAL when pulling externally mounted bearings, gears, and the like from hollow shafts or housings. It has a concentric, countersunk hole to accommodate the puller screw point.
What is a Solid Center Punch? 79 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Cable Type Ratchet Lever Puller? 20 Items: A Cable Type Ratchet Lever Puller (PULLER,RATCHET LEVER,CABLE TYPE) is an item consisting of a metal frame and ratchet lever reel to which is attached one end of a flexible cable (wire rope). The cable feeds through the fast eye in the metal frame, and may be reeved through a slip hook tackle hook. See also BINDER, LOAD; HOIST, WIRE ROPE and STRETCHER, WIRE.
What is an Electronic Equipment Tuning Wand? 18 Items: An Electronic Equipment Tuning Wand (TUNING WAND,ELECTRONIC EQUIPMENT) is a hand-held rod used in determining the adjustment of the windings of a radio frequency coil. It is made of insulating material with iron on one end and brass on the other end. By inserting the iron end in the coil, the inductance is increased and by inserting the brass end, the inductance is decreased.
What is a Combination Open End And Spanner Wrench? 14 Items: A Combination Open End And Spanner Wrench (WRENCH,OPEN END AND SPANNER,COMBINATION) is a tool having open end wrench characteristics at one end and spanner wrench features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s) at the other end.
What is a Detent Handling Tool? 187 Items: A Detent Handling Tool (HANDLING TOOL,DETENT) is a specially designed handling tool consisting of a rigid bar with a T-handle on one end. The other end is equipped with threads designed to mate the threads of a detent to facilitate inserting or extracting.
What is a Hand Material Handling Hook? 23 Items: A Hand Material Handling Hook (HOOK,MATERIAL HANDLING,HAND) is a hook whose curved end conforms to Style AP1, AP2, AP3 or AP4 of Reference Drawing Group AP. Excludes HOOK, MANHOLE COVER, HAND; HOOK, WIRE BREAKING, HAND; HOOK, ROCK CRUSHER FEEDING, HAND; HOOK, STRAINER REMOVING, HAND and HOOKS, BAG HANDLING, HAND.
What is a Magnetic Retrieving Tool? 11 Items: A Magnetic Retrieving Tool (RETRIEVING TOOL,MAGNETIC) is a hand-operated magnetic device used to locate and pick up metallic articles, such as bolts, nuts, pins, washers, and the like, in confined spaces. It may be rigid, flexible or adjustable. Excludes FINGER, MECHANICAL.
What is a Mechanical Puller Adapter? 78 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Combination Box And Open End Box Wrench? 13 Items: A Combination Box And Open End Box Wrench (WRENCH,BOX AND OPEN END BOX,COMBINATION) is a double end wrench, box and open end box, primarily designed for removing or replacing tube fittings. The opening in the open end box may be machined at an angle from the longitudinal center line of the wrench.
What is a Screw Thread Insert Inserter? 136 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Flat Tip Screwdriver Set? 48 Items: A Flat Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP) is a group of SCREWDRIVER, FLAT TIP having different characteristics.
What is a Terminal Crimping Tool Contact Positioner? 89 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 16 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is an Adjustable Wrench? 138 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 239 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 75 Items
Handle,Shovel 10 Items
What is a Socket Wrench Spanner Attachment? 88 Items: A Socket Wrench Spanner Attachment (SPANNER ATTACHMENT,SOCKET WRENCH) is an item having an adjustable or fixed span with pin, hook, or key type end that is used to fit and turn various size retaining rings, cover plates, plugs, couplings, and like parts. Usually designed to be driven by a male driver.
What is a Retaining Ring Installation Tool? 44 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Tacker? 16 Items: A Tacker is a hand-operated, hammerlike or gunlike item without a clincher, used to drive preformed connecting elements like pins, nails or staples through one object or piece of material into another. Excludes STAPLER (as modified).
What is a Bearing And Bushing Inserter? 290 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 207 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 939 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 14 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 93 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 161 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 94 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 141 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 53 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Six Point Tip Screwdriver? 155 Items: A Six Point Tip Screwdriver (SCREWDRIVER,SIX POINT TIP) is a manual screwdriver having a single nonremoveable blade having a tip with six rounded points.
What is a Seal Inserter And Remover? 147 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 478 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is a Preformed Packing Inserter And Remover? 34 Items: A Preformed Packing Inserter And Remover (INSERTER AND REMOVER,PREFORMED PACKING) is a hand tool designed to install and remove a PACKING, PREFORMED.
What is a Pin Remover? 34 Items: A Pin Remover (REMOVER,PIN) is a hand tool designed to facilitate the removal of a pin from a hole.
What is a Pin Inserter And Remover? 13 Items: A Pin Inserter And Remover (INSERTER AND REMOVER,PIN) is a rodlike tool designed to facilitate the insertion and removal of a pin from a hole.
What is an Electrical Contact Inserter And Remover? 37 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Piston Inserter? 40 Items: A Piston Inserter (INSERTER,PISTON) is a tool designed to permit installation of a piston or piston assembly without damaging the packings or piston.
What is a Spring Inserter And Remover? 85 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 13 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Stud Inserter? 22 Items: A Stud Inserter (INSERTER,STUD) is a device designed to drive in studs. It does not have any facilities for removing or extracting studs. See also INSERTER AND REMOVER, STUD.
What is a Stud Inserter And Remover? 17 Items: A Stud Inserter And Remover (INSERTER AND REMOVER,STUD) is a group of items designed to extract and to drive studs. It may include collets, guides, housings, holders and the like. See also REMOVER SET, STUD and INSERTER, STUD.
What is a Gear Inserter? 54 Items: A Gear Inserter (INSERTER,GEAR) is a hand tool designed to install various gears onto a gearshaft. It may be operated by a pushing or a striking force.
What is a Crimping Tool Die? 73 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is an Electrical Connector Inserter? 45 Items: An Electrical Connector Inserter (INSERTER,ELECTRICAL CONNECTOR) is a hand tool designed to hold an electrical connector, and to assist in the positioning and installation of the connector on a cover, panel or the like.
What is a Float? 12 Items: A Float is a tool used for concrete, plastering and grouting work.
What is a Mechanical Puller Set? 19 Items: A Mechanical Puller Set (PULLER SET,MECHANICAL) is two or more separate PULLER, MECHANICAL of different fixed sizes.
What is a Lifting Pneumatic Bag? 11 Items: A Lifting Pneumatic Bag (PNEUMATIC BAG,LIFTING) is a device made of flexible material designed to lift another item by being placed under the item and being inflated with air or some other gas. It will have a means of being connected to an air or gas source and may include a connector hose, a control valve and/or a pressure regulator.
What is a Cable Tie Installation Tool? 22 Items: A Cable Tie Installation Tool (INSTALLATION TOOL,CABLE TIE) is a lightweight, hand-held, hand-operated tool designed to fasten cable ties, straps and the like. Cable tie is inserted into the nose of the tool flush to the cable tie head. Trigger handle tightens cable tie and cuts off any excess. These installation tools are available in a variety of sizes depending on their intended use with miniature, intermediate, standard, heavy or extra heavy cross section ties.
What is a Bearing Staking Installation Tool? 159 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
Wrench Set,Ratchet 15 Items
What is a Sealant Dispenser? 26 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Retaining Ring Pliers Set? 10 Items: A Retaining Ring Pliers Set (PLIERS SET,RETAINING RING) is a group of PLIERS, RETAINING RING having different characteristics.
What is a Hand Armament Subsystem Carrier? 52 Items: A Hand Armament Subsystem Carrier (CARRIER,ARMAMENT SUBSYSTEM,HAND) is a metallic item with a clamp device and/or space for depositing articles. It is used for transporting weapon parts during maintanence and/or repair work, such as gun barrel, automatic loader, breechblock and the like.
What is a Ring Retaining Pliers Tip Set? 13 Items: A Ring Retaining Pliers Tip Set (TIP SET,PLIERS,RING RETAINING) is a collection of removable metallic tips in matched pairs used to provide various size capablities to PLIERS, RING RETAINING which permits the removal and installation of internal and external retaining rings.
What is a Plug Electrical Connector Extractor? 45 Items: A Plug Electrical Connector Extractor (EXTRACTOR,ELECTRICAL CONNECTOR,PLUG) is a hand tool designed to disassemble CONNECTOR, PLUG, ELECTRICAL from a CONNECTOR, RECEPTACLE, ELECTRICAL.
What is a Torque Wrench Adapter Set? 10 Items: A Torque Wrench Adapter Set (ADAPTER SET,TORQUE WRENCH) is tWO or more ADAPTER, TORQUE WRENCH of different sizes.
What is an Electronic Component Inserter And Remover? 79 Items: An Electronic Component Inserter And Remover (INSERTER AND REMOVER,ELECTRONIC COMPONENT) is an item which can insert or remove an electronic component package such as MICROCIRCUIT; RESISTOR, NETWORK (as modified); and the like from its mounting position or socket. Excludes INSERTER AND REMOVER, ELECTRICAL CONTACT; REMOVER, ELECTRICAL CONTACT; EXTRACTOR, ELECTRICAL CARD; EXTRACTOR, ELECTRONIC CRYSTAL UNIT; EXTRACTOR, ELECTRON TUBE.
What is an Impact Type Bit Set And Handle Screwdriver? 14 Items: An Impact Type Bit Set And Handle Screwdriver (SCREWDRIVER,BIT SET AND HANDLE,IMPACT TYPE) is an item consisting of a set of screwdriver bits and a impact driver to accommodate the bits of various types and characteristics. It is designed to transmit a strong rotating movement by the impact of a hammer blowed on the impact driver. It is used to loosen rusted or seized screws. Excludes SCREWDRIVER, BIT SET AND HANDLE.
What is a Hand Vise Jaw? 19 Items: A Hand Vise Jaw (JAW,VISE,HAND) is an item consisting of two opposing parts of a VISE, HAND. The item is moveable and able to open and close. It can hold, grasp or clamp work.
What is a Screwdriver Handle? 28 Items: A Screwdriver Handle (HANDLE,SCREWDRIVER) is an item used to accommodate various types of BIT, SCREWDRIVER. It is designed to rotate a bit that is used for installing or removing screws.
What is a Wire Twister Pliers? 25 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 284 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is a Mechanical Puller Body? 45 Items: A Mechanical Puller Body (BODY,PULLER,MECHANICAL) is an item designed to support and enclose the internal parts of a PULLER,MECHANICAL.
What is a Flat Tip And Cross Tip Screwdriver Set? 39 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is a Socket Wrench Screwdriver Attachment Set? 22 Items: A Socket Wrench Screwdriver Attachment Set (SCREWDRIVER ATTACHMENT SET,SOCKET WRENCH) is a set of screwdriver attachment, socket wrench of different sizes. Items consist of a female square drive on one end to attach to a handle, socket wrench and various screwdriver tip configurations on the opposite end. Excludes SCREWDRIVER ATTACHMENT,SOCKET WRENCH
What is an Oil Filter Wrench? 44 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 430 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Communications Equipment Spring Adjuster? 13 Items: A Communications Equipment Spring Adjuster (ADJUSTER,SPRING,COMMUNICATIONS EQUIPMENT) is a single or double end tool, equipped with slot(s) of various dimensions or with cylindrical rod(s), used for adjusting the springs or spring tensioned parts of electronic equipment.
What is a Rotating Members Aligning Tool? 32 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
What is a Final Drive Assembly Alignment Pin? 41 Items: A Final Drive Assembly Alignment Pin (ALIGNMENT PIN,FINAL DRIVE ASSEMBLY) is a special designed pin used in the assembling of the final drive.
Arm,Handling Tool 77 Items
What is a Splicing Sleeve Compressing Tool? 23 Items: A Splicing Sleeve Compressing Tool (COMPRESSING TOOL,SPLICING SLEEVE) is a hand tool having hinged leverage handles similar to a CUTTER, BOLT or pliers, designed to compress a splicing sleeve when joining the ends of two conductors, or when forming an eye splice in the end of a wire rope. Excludes CRIMPING TOOL, TERMINAL, HAND.
What is a Hand Screw Jack Extension? 14 Items: A Hand Screw Jack Extension (EXTENSION,HAND SCREW JACK) is a length of externally threaded rigid shafting which is the adjustable section of a JACK, SCREW, HAND.
What is a Mechanical Puller Gear Adapter? 21 Items: A Mechanical Puller Gear Adapter (GEAR ADAPTER,PULLER,MECHANICAL) is an adapter that adapts a PULLER,MECHANICAL, to pull a certain gear.
Handle,Hydraulic Jack 18 Items
What is a Female Electrical Contact Resizing Tool? 11 Items: A Female Electrical Contact Resizing Tool (RESIZING TOOL,FEMALE ELECTRICAL CONTACT) is a tool designed to shape to a specific size, female contacts such as those used on electrical connectors, tube sockets, crystal sockets, and pin jacks.
What is a Screwdriver And Socket Wrench Combination? 13 Items: A Screwdriver And Socket Wrench Combination is a hand-tool formed into an integral unit with a socket wrench at one end and a screwdriver bit at the other end. See also SCREWDRIVER AND WRENCH ASSEMBLY.
What is a Hand Hose Fitting Swaging Tool Kit? 11 Items: A Hand Hose Fitting Swaging Tool Kit (SWAGING TOOL KIT,HOSE FITTING,HAND) is a device, hydraulically actuated by hand or power operated pump, consisting of face plate, adapter plate, finger cages, fingers, ram, bushing, and expanding mandrels combined on a single base in various functional arrangements. It is used for swaging the outside diameter of hose assembly fittings, expanding the inside diameter of hose assemblies, and securing the fabrication of hose assemblies. Included are a hand or power operated pump, lubricant, cases, and trays.
What is a Catch Lever Tool? 12 Items: A Catch Lever Tool (LEVER TOOL,CATCH) is a specially designed hand tool which engages the opening and closing lever of a CATCH (as modified) for ease of operation. It is constructed of thin rigid material, usually flat, and one end has an engaging tongue.
What is a Manual Impact Wrench? 11 Items: A Manual Impact Wrench (WRENCH,IMPACT,MANUAL) is a manually operated handheld tool consisting of spring-loaded handle and a power-impact head which delivers a torsional impact from either continuous movement of the handle in one direction, or by a reciprocating action. It is used in tightening and loosening fasteners, such as bolts, nuts, and the like. The item may include sockets, extensions and offset fittings, nut runners, and the like.
What is a Drift? 63 Items: A Drift is an item consisting of a tubular body fitted with replaceable tips. It is designed to insert or remove mechanical components where space is restricted.
What is a Nutdriver? 46 Items: A Nutdriver is a non-powered hand tool with a screwdriver style handle, shaft and formed female hex or square socket at driving end.
What is a Locking Device Removal Tool? 12 Items: A Locking Device Removal Tool (REMOVAL TOOL,LOCKING DEVICE) is a hand tool designed to facilitate the removal of a WASHER, KEY and a LOCKING PLATE, NUT AND BOLT.
What is a Hydraulic Fitting Crimping Tool Head? 26 Items: A Hydraulic Fitting Crimping Tool Head (HEAD,CRIMPING TOOL,HYDRAULIC FITTING) is a component of a crimping tool used to compress fittings on fluid tubes. It consists of a U-shape item, in which, are mounted different sizes of DIE, CRIMPING TOOL for tubes of various diameters.
What is a Torque Screwdriver? 11 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.
What is a Special Purpose Combination Wrench? 13 Items: A Special Purpose Combination Wrench (WRENCH,COMBINATION,SPECIAL PURPOSE) is a tool having a combination of ends and facets. The ends may have open end, box or spanner characteristics. The sides may have features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s). Designed to fit specific items, not sized as standard or metric.
What is a Screwdriver Bit Holder? 56 Items: A Screwdriver Bit Holder (HOLDER,SCREWDRIVER BIT) is an attachment with a socket end for accepting male hexagon shank insert bits and a drive end for adapting to a portable power or hand tool.
What is a Telescoping Pole? 16 Items: A Telescoping Pole (POLE,TELESCOPING) is an item which is designed to be extended or compressed by the sliding of overlapping sections. This item may or may not be able to accommodate an extension.

Stock Items From Supply Class 5120 Page 45 of 110

5120-14-214-4134

5120-14-216-0055

5120-14-357-7709
Assiette De Cric

143577709
1018410: RNCC: 3 | RNVC: 2
FOE1018410: RNCC: 5 | RNVC: 9

20 Jul 1979

5120-14-347-8675

5120-14-491-0201
Jauge

144910201
4602 009 600 019: RNCC: 3 | RNVC: 2
F300 0T 001 0995: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-354-8998
Extrac Emmanc Outil

143548998
D47638: RNCC: 3 | RNVC: 2

20 Feb 1979

5120-14-373-6740
Mandrin De Montage

143736740
218344: RNCC: 3 | RNVC: 2

13 Nov 1981

5120-14-562-5065
Spanner Wrench

145625065
ARM01-47: RNCC: 3 | RNVC: 2

30 Oct 2009

5120-14-224-3084
Cle Speciale Dimpul

142243084
R530-90-354: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-572-0634
Hand Hammer

145720634
PNA00086A: RNCC: 3 | RNVC: 2

5 Jun 2012

5120-14-340-9771

5120-14-230-2446

5120-14-271-8365

5120-14-464-4745
Open End Wrench

144644745
695 720 730 200: RNCC: 3 | RNVC: 2

4 Aug 1993

5120-14-488-2974
Wrench Kit

144882974
P720553: RNCC: 3 | RNVC: 2

29 Apr 1997

5120-14-553-3146
Socket Head Screw Key

145533146
1072242000: RNCC: 3 | RNVC: 2

23 Mar 2007

5120-14-530-9204
Socket Wrench Socket

145309204
37200: RNCC: 3 | RNVC: 2
NK.19L: RNCC: 5 | RNVC: 2
3148510372006: RNCC: 5 | RNVC: 2

17 Jul 2002

5120-14-242-0988

5120-14-344-3386
Cone De Montage

143443386
D47725: RNCC: 3 | RNVC: 2

10 Aug 1977

5120-14-553-2756
Out Virole Chargeur

145532756
037655: RNCC: 3 | RNVC: 2
37655: RNCC: 5 | RNVC: 2

20 Mar 2007

5120-14-422-0119
Socket Wrench Screwdriver Attachment

144220119
0025203: RNCC: 3 | RNVC: 2
ET603: RNCC: 5 | RNVC: 2
ET.603: RNCC: 5 | RNVC: 2

16 Feb 1988

5120-14-310-7317
Open End Wrench

143107317
MAS4682: RNCC: 3 | RNVC: 2
5011851: RNCC: 5 | RNVC: 2

1 Jan 1974

5120-14-220-7931
Open End Wrench

142207931
RACC32: RNCC: 3 | RNVC: 2
R10AX32: RNCC: 5 | RNVC: 2
RACC32: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-481-3147
Spanner Wrench

144813147
10381391: RNCC: 3 | RNVC: 2

1 May 1996

5120-14-572-8434
Socket Wrench Socket

145728434
120004: RNCC: 3 | RNVC: 2
7612206012263: RNCC: 5 | RNVC: 2

13 Aug 2012

5120-14-254-3552

5120-14-392-0849
Torque Wrench Adapter

143920849
853-100-111-0: RNCC: 3 | RNVC: 2

21 Mar 1984

5120-14-573-7183
Socket Head Screw Key

145737183
83S.12L: RNCC: 3 | RNVC: 2

6 Nov 2012

5120-14-436-0311
Fausse Butee

144360311
810330: RNCC: 3 | RNVC: 2

29 Nov 1989

5120-14-284-3383
Cle Presse-Etoupe

142843383
R28019SM4: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-216-0979

5120-14-284-7451

5120-14-569-3070
Mechanical Puller

145693070
F27587000: RNCC: 3 | RNVC: 2
F27587000: RNCC: 5 | RNVC: 2

1 Sep 2011

5120-14-216-4124

5120-14-499-0811
Cle

144990811
70152R230200: RNCC: 3 | RNVC: 2
70152R230200: RNCC: 5 | RNVC: 9
F300 0T 017 2174: RNCC: 6 | RNVC: 9

29 Oct 1997

5120-14-438-0828
De Formage Tas

144380828
853-600-209-0: RNCC: 3 | RNVC: 2

7 Mar 1990

5120-14-430-1009
Cloche Pince

144301009
6814-58529: RNCC: 3 | RNVC: 2

1 Mar 1989

5120-14-405-0877
Bride Serrage Rapid

144050877
BS-2S: RNCC: 3 | RNVC: 2

20 Nov 1985

5120-14-286-2231
Open End Wrench

142862231
20.13: RNCC: 3 | RNVC: 2
20-13: RNCC: 5 | RNVC: 2
3148510935300: RNCC: 5 | RNVC: 2
0093530: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-513-7448
Screwdriver Bit Holder

145137448
NO PRIMARY REF14-513-7448: RNCC: 3 | RNVC: 2
EF.1P4: RNCC: 5 | RNVC: 2
022831: RNCC: 5 | RNVC: 2
EF.1P4: RNCC: 5 | RNVC: 2
1118015X00: RNCC: 5 | RNVC: 2

12 Apr 1999

5120-14-404-9166
Offset Screwdriver

144049166
255M-10: RNCC: 3 | RNVC: 2
255M10: RNCC: 3 | RNVC: 2
3272670243279: RNCC: 5 | RNVC: 2

20 Nov 1985

5120-14-304-3143
Cone Mise En Forme

143043143
S16-0605-1292: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-297-7686
Spanner Wrench

142977686
6800-2209: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-428-8842
Bearing And Bushing Inserter

144288842
350A93-3723-20: RNCC: 3 | RNVC: 2

22 Dec 1988

5120-14-250-5574

5120-14-274-8340

5120-14-275-1685
Outil Dextraction

142751685
3CGF85: RNCC: 3 | RNVC: 2
3CGF85: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-228-5632

5120-14-276-1669

5120-14-239-8976

5120-14-571-3213
Flat Tip And Cross Tip Screwdriver Set

145713213
811420: RNCC: 3 | RNVC: 2

14 Mar 2012

5120-14-572-3795
Pneumatic Tire Valve Core Inserter And Remover

145723795
W241: RNCC: 3 | RNVC: 2
B003784: RNCC: 5 | RNVC: 2
BM381: RNCC: 5 | RNVC: 2

28 Jun 2012

5120-14-536-3681
Socket Head Screw Key

145363681
47211075: RNCC: 3 | RNVC: 2

29 Jul 2003

5120-14-449-7453
Socket Head Screw Key

144497453
29686804: RNCC: 3 | RNVC: 2

4 Sep 1991

5120-14-275-8162
Wrench Kit

142758162
8810254000: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-470-7623
Terminal Crimping Tool Contact Positioner

144707623
M4HZ7101966201: RNCC: 3 | RNVC: 2

6 Jul 1994

5120-14-286-5351
Torque Wrench Adapter

142865351
A107: RNCC: 3 | RNVC: 2
RT20160: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-227-3438

5120-14-457-9936
Seal Inserter And Remover

144579936
547845: RNCC: 3 | RNVC: 2

2 Oct 1992

5120-14-505-3041
Bearing And Bushing Inserter And Remover

145053041
MMG070A18: RNCC: 3 | RNVC: 2

18 Mar 1998

5120-14-515-9536
Socket Wrench Socket

145159536
NM52: RNCC: 3 | RNVC: 2

30 Aug 1999

5120-14-232-3887
Screwdriver Bit

142323887
A260: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-324-4922
Spanner Wrench

143244922
C47480: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-538-8731
Spanner Wrench

145388731
NGM0021040409025: RNCC: 2 | RNVC: 2

9 Dec 2003

5120-14-351-2142
Spanner Wrench

143512142
489412U: RNCC: 3 | RNVC: 2

10 Aug 1978

5120-14-574-5005
Socket Wrench Socket

145745005
NS.11A: RNCC: 3 | RNVC: 2
654653: RNCC: 5 | RNVC: 2
3148516546531: RNCC: 5 | RNVC: 2

24 Jan 2013

5120-14-532-0289
Socket Wrench Socket

145320289
JTX.10: RNCC: 3 | RNVC: 2

9 Oct 2002

5120-14-307-1092
Cle De Collectrice

143071092
0392-1050: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-299-6419
Douille Sertissage

142996419
FF8X1B: RNCC: 3 | RNVC: 2
0T1600: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-203-1431

5120-14-409-1476
Outil Amortisseur

144091476
76545910700: RNCC: 3 | RNVC: 2
765459107: RNCC: 5 | RNVC: 9

16 Apr 1986

5120-14-289-9899

5120-14-333-3857

5120-14-376-5017

5120-14-476-5093
Depose Balais Outil

144765093
410848: RNCC: 3 | RNVC: 2
E4308: RNCC: 5 | RNVC: 2
Z00.N6000707226: RNCC: 5 | RNVC: 2
Z00.N6000707226TBM: RNCC: 5 | RNVC: 9

14 Jun 1995

5120-14-575-0314
Mechanical Puller Attachment

145750314
62011334AA: RNCC: 3 | RNVC: 2

7 Mar 2013

5120-14-315-1856
Chasse-Joint Access

143151856
61854-2: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-262-5552
Guide Pour Montage

142625552
M0NT16898-2: RNCC: 3 | RNVC: 2
M0N16898-2: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-530-9289
Combination Open End And Spanner Wrench

145309289
SMC-P-17183-011-0: RNCC: 3 | RNVC: 2

17 Jul 2002

5120-14-204-3013
Cle Speciale

142043013
M3-061: RNCC: 3 | RNVC: 2
M3-061: RNCC: 5 | RNVC: 9

1 Jan 1963

5120-14-374-0898
Montage Outil

143740898
UMG047-71: RNCC: 3 | RNVC: 2

8 Dec 1981

5120-14-209-4623
Tournevis Pour Cond

142094623
NO PRIMARY REF14-209-4623: RNCC: 3 | RNVC: 2
21625: RNCC: 5 | RNVC: 9
21625: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-368-5049
Spanner Wrench

143685049
MHJ166-23: RNCC: 3 | RNVC: 2
MHJ166-23: RNCC: 5 | RNVC: 2
85-691-0053: RNCC: 6 | RNVC: 9

20 Feb 1981

5120-14-436-4821
Spanner Wrench

144364821
350A93-3210-00: RNCC: 3 | RNVC: 2

3 Jan 1990

5120-14-437-3241
Open End Wrench

144373241
31795203: RNCC: 3 | RNVC: 9
85-694-1346: RNCC: 6 | RNVC: 9

24 Jan 1990

5120-14-298-1745
Open End Wrench

142981745
D1553-8079: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-393-6040
Flat Tip Screwdriver

143936040
NO PRIMARY REF14-393-6040: RNCC: 3 | RNVC: 2
T0URNEVIS: RNCC: 5 | RNVC: 9

7 Jun 1984

5120-14-371-7904
Craftsman's Tweezers

143717904
137: RNCC: 3 | RNVC: 2
7473: RNCC: 5 | RNVC: 2
85-691-5187: RNCC: 6 | RNVC: 9

5 Aug 1981

5120-14-206-8032

5120-14-437-6856
Dispositif De Mont

144376856
9689160147: RNCC: 3 | RNVC: 2
9689160147: RNCC: 5 | RNVC: 2
DLP756770: RNCC: 5 | RNVC: 2
1682310031: RNCC: 5 | RNVC: 2

7 Feb 1990

5120-14-565-1904
Combination Box And Open End Wrench

145651904
440.14: RNCC: 3 | RNVC: 2
3148517680104: RNCC: 5 | RNVC: 2
123M7375: RNCC: 5 | RNVC: 2
768010: RNCC: 5 | RNVC: 9

22 Jul 2010

5120-14-552-8359
Socket Head Screw Key

145528359
83H.18: RNCC: 3 | RNVC: 2
83H.18: RNCC: 5 | RNVC: 2
3148511241813: RNCC: 5 | RNVC: 2

7 Feb 2007

5120-14-317-0686
Mechanical Puller Attachment

143170686
580868: RNCC: 3 | RNVC: 9

1 Jan 1975

5120-14-466-7483
Spanner Wrench

144667483
523365: RNCC: 3 | RNVC: 2
A523365: RNCC: 5 | RNVC: 2

24 Nov 1993

5120-14-259-2632
Spanner Wrench

142592632
0U12773: RNCC: 3 | RNVC: 2

1 Jan 1969

5120-14-281-2981
Piece Dappui Verin

142812981
C46925: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-309-9624

5120-14-444-5655
Slugging Type Box Wrench Socket

144445655
HTP226: RNCC: 3 | RNVC: 9

15 Jan 1991

5120-14-291-3486
Screw Thread Insert Extractor

142913486
206090: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-250-0116
Spanner Wrench

142500116
EC2304: RNCC: 3 | RNVC: 2
0000330541: RNCC: 5 | RNVC: 2
330541: RNCC: 5 | RNVC: 9
0000330541: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-468-9818
Bearing And Bushing Inserter And Remover

144689818
40N108123: RNCC: 3 | RNVC: 2

30 Mar 1994

5120-14-311-9520

5120-14-514-1214
Flat Tip Screwdriver

145141214
ENFD6565-1-2X6-5: RNCC: 3 | RNVC: 2

27 Apr 1999

5120-14-506-7221
Handling Tool Arm

145067221
J05687-02-1000: RNCC: 3 | RNVC: 2

13 May 1998

5120-14-456-9504
Wrench Extension Handle

144569504
95MS088-10: RNCC: 3 | RNVC: 2

30 Jul 1992

5120-14-249-5520
Faux Mors

142495520
PR46756: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-538-8801
Spanner Wrench

145388801
NGM0022030200431: RNCC: 2 | RNVC: 2

9 Dec 2003

5120-14-325-6123
Crochet Dextracteur

143256123
474018: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-251-1153
Extracteur

142511153
202426: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-333-3894

5120-14-202-5998

5120-14-574-6818
Pliers

145746818
431.LE: RNCC: 3 | RNVC: 2
FACOM 431.LE: RNCC: 5 | RNVC: 2

13 Feb 2013

5120-14-415-4727
Appareillage Montag

144154727
4679: RNCC: 3 | RNVC: 2

18 May 1987

5120-14-448-7377
Collage Outillage

144487377
46AM119: RNCC: 3 | RNVC: 2

9 Jul 1991

5120-14-344-5825

5120-14-463-2592
Cle Speciale

144632592
441827W: RNCC: 3 | RNVC: 2

4 Jun 1993

5120-14-568-8328
Seal Inserter

145688328
888-566-400-1: RNCC: 3 | RNVC: 2

8 Jul 2011

5120-14-573-5794
Socket Wrench Socket Set

145735794
S.300-21: RNCC: 3 | RNVC: 2

23 Oct 2012

5120-14-237-5604
Outil De Freinage I

142375604
60290-01-110M4: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-514-8415
Cross Tip Screwdriver

145148415
ENFD6569-2X300: RNCC: 3 | RNVC: 2

21 Jun 1999

5120-14-032-3497
Monte-Segments

140323497
35658: RNCC: 3 | RNVC: 2

17 Feb 1983

5120-14-343-8338

5120-14-252-2071

5120-14-433-6108
Bearing And Bushing Inserter And Remover

144336108
8815411000: RNCC: 3 | RNVC: 2
89415025: RNCC: 5 | RNVC: 2

2 Aug 1989

5120-14-321-9926
Piston Ring Compressor

143219926
02640022000: RNCC: 3 | RNVC: 2
026400220: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-567-1512
Mechanical Puller

145671512
62023599AA: RNCC: 3 | RNVC: 2

16 Feb 2011

5120-14-446-0376
Speciale Cle

144460376
M13790: RNCC: 3 | RNVC: 2

4 Mar 1991

5120-14-390-7956
Cle Speciale

143907956
065U20-623255X: RNCC: 3 | RNVC: 2

1 Mar 1984

5120-14-497-3069
Tournevis

144973069
RSX4043: RNCC: 3 | RNVC: 2
F300 0T 022 9893: RNCC: 6 | RNVC: 9

15 Oct 1997

5120-14-219-2185

5120-14-218-9618

5120-14-338-2353

5120-14-366-7428
Cle A Excentrique

143667428
J00750-02-5200: RNCC: 3 | RNVC: 2

20 Nov 1980

5120-14-493-2065
Cle

144932065
5000269185: RNCC: 3 | RNVC: 2
F300 0T 011 3439: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-528-0324
Electronic Component Inserter And Remover

145280324
SP12191: RNCC: 3 | RNVC: 2

12 Dec 2001

5120-14-232-9205
Adaptateur Emmanche

142329205
78592: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-348-1789
Grattoir Film Cooli

143481789
8813010000: RNCC: 3 | RNVC: 2

29 Mar 1978

5120-14-287-8757

5120-14-456-3058
Mandrin Pour Connec

144563058
11148: RNCC: 3 | RNVC: 2

25 Jun 1992

5120-14-379-4892
Tarage Tirants Cle

143794892
7M141G3: RNCC: 3 | RNVC: 2

1 Oct 1982

5120-14-271-6107

5120-14-295-2653

5120-14-478-6053
Spanner Wrench

144786053
1-1038-03-00-01: RNCC: 3 | RNVC: 9

8 Nov 1995

5120-14-357-3415
Socket Wrench Socket

143573415
K.2'3/16A: RNCC: 3 | RNVC: 2
3148510299655: RNCC: 5 | RNVC: 2
0029965: RNCC: 5 | RNVC: 9
K2 3-16: RNCC: 5 | RNVC: 9

7 Jun 1979

5120-14-480-2625
Spanner Wrench

144802625
888-378-900-1: RNCC: 3 | RNVC: 2

28 Feb 1996

5120-14-456-7193
Dessertissage Ce

144567193
853-600-330-0: RNCC: 3 | RNVC: 2

24 Jul 1992

5120-14-438-4991
Torque Wrench Adapter

144384991
MHD537-22: RNCC: 3 | RNVC: 2
85-694-0428: RNCC: 6 | RNVC: 9

21 Mar 1990

5120-14-443-9337

5120-14-316-6637

5120-14-217-2725

5120-14-563-0401
Flat Tip Screwdriver

145630401
AW5,5X150: RNCC: 3 | RNVC: 2
3148517740570: RNCC: 5 | RNVC: 2

16 Dec 2009

5120-14-262-2185

5120-14-271-6132

5120-14-414-9128
Vis Goujonniere

144149128
24145035700: RNCC: 3 | RNVC: 2
24150357: RNCC: 5 | RNVC: 9

23 Mar 1987

5120-14-313-5812
Socket Wrench Crowfoot Attachment

143135812
C47288: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-447-6620

5120-14-444-3207

5120-14-256-8893
Socket Head Screw Key

142568893
A28214: RNCC: 3 | RNVC: 2

1 Jan 1969

5120-14-444-8099
Socket Head Screw Key

144448099
3511 191 47811: RNCC: 3 | RNVC: 2

22 Jan 1991

5120-14-386-4855
Vise Jaw Caps

143864855
C47825: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-539-3136
Spanner Wrench

145393136
T642G4001801: RNCC: 3 | RNVC: 2

22 Dec 2003

5120-14-395-7383
Spanner Wrench

143957383
46AM019: RNCC: 3 | RNVC: 2

30 Oct 1984

5120-14-317-0448
Spanner Wrench

143170448
RT5394: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-541-2074
Hand Terminal Crimping Tool

145412074
5680: RNCC: 3 | RNVC: 2
5680: RNCC: 5 | RNVC: 9
AA005311: RNCC: 6 | RNVC: 9

19 May 2004

5120-14-479-4144
Maintien Outillage

144794144
46AM052: RNCC: 3 | RNVC: 2

10 Jan 1996

5120-14-248-7453

5120-14-240-5532

5120-14-357-9991
Essais Support

143579991
MKM0435200: RNCC: 3 | RNVC: 2
MKM0435200: RNCC: 5 | RNVC: 2

20 Jul 1979

5120-14-267-6596
Cle Chapeau Palier

142676596
5538869: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-520-1480
Decolleur

145201480
5000260835: RNCC: 3 | RNVC: 2

17 May 2000

144915779
NO PRIMARY REF14-491-5779: RNCC: 3 | RNVC: 2
8CFS: RNCC: 5 | RNVC: 9
F300 0T 003 4099: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-375-5047

5120-14-570-5069
Box Wrench

145705069
490 000.224: RNCC: 3 | RNVC: 2

21 Dec 2011

5120-14-404-1189
Extraction Vis

144041189
09P756: RNCC: 3 | RNVC: 2

11 Sep 1985

5120-14-328-1266

5120-14-378-3150
Support Demont Ress

143783150
02640912500: RNCC: 3 | RNVC: 2
026409125: RNCC: 5 | RNVC: 2

20 Jul 1982

5120-14-566-8278
Open End Wrench

145668278
62519092AA: RNCC: 3 | RNVC: 2

23 Dec 2010

5120-14-567-1551
Retaining Ring Pliers

145671551
197A.23: RNCC: 3 | RNVC: 2
823322: RNCC: 5 | RNVC: 2
3148518233224: RNCC: 5 | RNVC: 2

16 Feb 2011

5120-14-464-3203

5120-14-573-2433
Socket Wrench Handle

145732433
9203400101: RNCC: 3 | RNVC: 2
3303809001542: RNCC: 5 | RNVC: 2
A251403000168: RNCC: 5 | RNVC: 2

25 Sep 2012

5120-14-522-4610
Mechanical Puller Set

145224610
6519POC: RNCC: 3 | RNVC: 2

31 Oct 2000

5120-14-311-2515

5120-14-285-3272

5120-14-256-4519

5120-14-401-5203
Socket Head Screw Key

144015203
88.3: RNCC: 3 | RNVC: 2
67B-3: RNCC: 3 | RNVC: 2
67B3: RNCC: 3 | RNVC: 2
88-3: RNCC: 5 | RNVC: 2
0196822B00: RNCC: 5 | RNVC: 2
3272670296251: RNCC: 5 | RNVC: 2
91519158: RNCC: 5 | RNVC: 2
O613 250 030: RNCC: 5 | RNVC: 2
3148511265505: RNCC: 5 | RNVC: 2
0126550: RNCC: 5 | RNVC: 9

13 Jun 1985

5120-14-490-8720
Broche

144908720
4065 020 000 586: RNCC: 3 | RNVC: 2
F300 0T 000 4960: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-534-8916
Open End Wrench

145348916
556187: RNCC: 3 | RNVC: 2

14 Apr 2003

5120-14-538-3969
Spanner Wrench

145383969
NGM0010036463574: RNCC: 2 | RNVC: 2

9 Dec 2003

5120-14-428-5548
Equipe Mandrin

144285548
MKL0460300: RNCC: 3 | RNVC: 2

8 Dec 1988

5120-14-270-6337

5120-14-553-5310
Bearing Staking Installation Tool

145535310
61462562AA: RNCC: 3 | RNVC: 2

12 Apr 2007

5120-14-451-5107
Seal Inserter And Remover

144515107
540326: RNCC: 3 | RNVC: 2

21 Nov 1991

5120-14-272-8633
Communications Equipment Spring Adjuster

142728633
S1115: RNCC: 3 | RNVC: 2
S1115: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-548-9316
Flat Tip Screwdriver

145489316
46599492: RNCC: 3 | RNVC: 2

23 Feb 2006

5120-14-547-8073
Pliers

145478073
DM.28: RNCC: 3 | RNVC: 2

16 Nov 2005

5120-14-539-3139
Socket Wrench Socket

145393139
T651G3001124: RNCC: 3 | RNVC: 2

22 Dec 2003

5120-14-530-6468
Spanner Wrench

145306468
F1400944: RNCC: 3 | RNVC: 2

1 Jul 2002

5120-14-318-6433
Spanner Wrench

143186433
C46034: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-281-2959
Faux Mors Tige Veri

142812959
C46820: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-503-8291
Cle De Culasse

145038291
544568: RNCC: 3 | RNVC: 2

30 Jan 1998

5120-14-539-3123
Socket Wrench Socket

145393123
T636G3002221: RNCC: 3 | RNVC: 2

22 Dec 2003

5120-14-306-3500

5120-14-300-8893

5120-14-271-9789
Matrice De Sertissa

142719789
47825: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-418-2836
Douille

144182836
690315: RNCC: 3 | RNVC: 2

6 Aug 1987

5120-14-428-5341
Essai Cloche

144285341
MKA4502101: RNCC: 3 | RNVC: 2

8 Dec 1988

5120-14-261-7663

5120-14-347-6360
Open End Wrench

143476360
422693: RNCC: 3 | RNVC: 2
85-689-3595: RNCC: 6 | RNVC: 9

1 Mar 1978

5120-14-533-9273
Socket Head Screw Key

145339273
453 7408-268: RNCC: 3 | RNVC: 2
101022018051A: RNCC: 3 | RNVC: 9

5 Mar 2003

5120-14-437-2473
Electrical Connector Inserter

144372473
0766151S00: RNCC: 3 | RNVC: 2
85-694-2638: RNCC: 6 | RNVC: 9

24 Jan 1990

5120-14-272-3667
Open End Wrench

142723667
E74302C36-38WWW: RNCC: 2 | RNVC: 1

1 Jan 1971

5120-14-441-2329
Bearing And Bushing Inserter And Remover

144412329
6807V32-2428-00: RNCC: 3 | RNVC: 2

22 Aug 1990

5120-14-503-3328
Pneumatic Tire Valve Repair Tool

145033328
SF1: RNCC: 3 | RNVC: 2
14-11-00-01: RNCC: 5 | RNVC: 2

12 Jan 1998

5120-14-272-3639
Open End Wrench

142723639
E74302C4-5WWW: RNCC: 2 | RNVC: 1

1 Jan 1971

5120-14-531-6649
Six Point Tip Screwdriver

145316649
ACZX.10X75: RNCC: 3 | RNVC: 2
ACZX.10X75: RNCC: 5 | RNVC: 2
ACZX-10X75: RNCC: 5 | RNVC: 2
8033544C00: RNCC: 5 | RNVC: 2

11 Sep 2002

5120-14-410-0146
Capsul Outil Reglag

144100146
8813187000: RNCC: 3 | RNVC: 2

4 Jun 1986

5120-14-467-1939
Levier D'extraction

144671939
440478: RNCC: 3 | RNVC: 2

21 Dec 1993

5120-14-209-3990

5120-14-288-2871

5120-14-216-5158

5120-14-433-1527
Socket Wrench Adapter-Extension

144331527
291299013: RNCC: 3 | RNVC: 2
29 129 9013: RNCC: 5 | RNVC: 9

11 Jul 1989

5120-14-250-0416
Body And Fender Spoon

142500416
M0B324: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-526-7510
Mechanical Puller Attachment

145267510
46423668: RNCC: 3 | RNVC: 2

3 Sep 2001

5120-14-431-7809
Socket Head Screw Key

144317809
0411-60190: RNCC: 3 | RNVC: 2

10 May 1989

5120-14-527-2886
Detent Handling Tool

145272886
0621142MECA014: RNCC: 3 | RNVC: 9
SYQ0456: RNCC: 5 | RNVC: 2

18 Oct 2001

5120-14-436-0293
Reglage-Blocage Bal

144360293
RT32475: RNCC: 3 | RNVC: 2

29 Nov 1989

5120-14-468-7083
Socket Wrench Screwdriver Attachment

144687083
0514480: RNCC: 3 | RNVC: 2
3148515144806: RNCC: 5 | RNVC: 2
RX.40: RNCC: 5 | RNVC: 2
RX40: RNCC: 5 | RNVC: 2

16 Mar 1994

5120-14-484-6511
Socket Wrench Screwdriver Attachment

144846511
0514415: RNCC: 3 | RNVC: 2

28 Nov 1996

5120-14-362-3053
Electrical Contact Remover

143623053
R282944: RNCC: 3 | RNVC: 2

20 Feb 1980

5120-14-348-5084

5120-14-266-6985

5120-14-384-2217

5120-14-528-4716
Drift

145284716
888-472-000-1: RNCC: 3 | RNVC: 2
888-472-000-1: RNCC: 5 | RNVC: 2

30 Jan 2002

5120-14-404-1063
Screwdriver And Socket Wrench Combination

144041063
853-100-178-0: RNCC: 3 | RNVC: 2

11 Sep 1985

5120-14-253-3692
Semelle Pour Levier

142533692
410245M: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-265-6543

5120-14-217-1863

5120-14-314-2333
Spanner Wrench

143142333
160-888057: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-490-8803
Aiguill

144908803
4066 213 400 010: RNCC: 3 | RNVC: 2
F300 0T 000 5075: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-491-0096
Coffre

144910096
4602 003 800 016: RNCC: 3 | RNVC: 2
F300 0T 001 0875: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-364-1575

5120-14-376-2342

5120-14-302-6701
Open End Wrench

143026701
RACC22: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-316-1584
Spanner Wrench

143161584
C66080: RNCC: 3 | RNVC: 2
100996: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-341-0164
Spanner Wrench

143410164
0415-12: RNCC: 3 | RNVC: 2

16 Mar 1977

5120-14-523-5464
Hydraulic Fitting Crimping Tool Head

145235464
DLT10PSHA3105: RNCC: 3 | RNVC: 2

24 Jan 2001

5120-14-338-6995
Socket Head Screw Key

143386995
002295005P: RNCC: 3 | RNVC: 2

17 Dec 1976

5120-14-510-2948
Pliers

145102948
MUP5758: RNCC: 3 | RNVC: 2
5120AA8018944: RNCC: 6 | RNVC: 9

4 Nov 1998

5120-14-428-7966
Hand Blind Riveter

144287966
0292580: RNCC: 3 | RNVC: 2
YRIVBOX: RNCC: 5 | RNVC: 2
91634569: RNCC: 5 | RNVC: 2
91634569: RNCC: 5 | RNVC: 2

21 Dec 1988

5120-14-259-2638
Spanner Wrench

142592638
0U12825: RNCC: 3 | RNVC: 2

1 Jan 1969

5120-14-460-3158
Leveling-Support Jack

144603158
45215591: RNCC: 3 | RNVC: 2
1101101020.000: RNCC: 5 | RNVC: 2
45215591: RNCC: 5 | RNVC: 9

21 Jan 1993

5120-14-352-6007
Screw Thread Insert Inserter

143526007
472130: RNCC: 3 | RNVC: 2
01500112360: RNCC: 3 | RNVC: 2
01500212300: RNCC: 5 | RNVC: 2

16 Oct 1978

5120-14-536-5242
Open End Wrench

145365242
61070334AA: RNCC: 3 | RNVC: 2

28 Aug 2003

5120-14-520-5739
Vise Jaw Caps

145205739
1223.M7: RNCC: 3 | RNVC: 2
3148512257295: RNCC: 5 | RNVC: 2

24 May 2000

5120-14-379-9906
Open End Wrench

143799906
53H302048: RNCC: 3 | RNVC: 2

20 Oct 1982

5120-14-482-3752
Screwdriver Bit

144823752
001195D: RNCC: 3 | RNVC: 2

11 Jul 1996

5120-14-239-9163

5120-14-416-7481
Controle Appareil

144167481
536928: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-416-7645
Positionn Outillage

144167645
540421: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-219-2204
Extracteur Special

142192204
PR47118: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-240-4779

5120-14-560-0534
Plug Electrical Connector Extractor

145600534
14100044028: RNCC: 3 | RNVC: 2

17 Mar 2009

5120-14-565-2320
Seal Inserter And Remover

145652320
MDN31A311: RNCC: 3 | RNVC: 2

28 Jul 2010

5120-14-307-0681

5120-14-523-5458
Hydraulic Fitting Crimping Tool Head

145235458
DLT30PSHAS018: RNCC: 3 | RNVC: 2

24 Jan 2001

5120-14-319-3061
Matrice De Sertissa

143193061
47103: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-285-6254

5120-14-347-8677

5120-14-297-1226

5120-14-463-7658
Manchon

144637658
428383X: RNCC: 3 | RNVC: 2
M17403: RNCC: 5 | RNVC: 2

29 Jun 1993

5120-14-289-8498

5120-14-234-2316
Calibre De Percage

142342316
100004188: RNCC: 3 | RNVC: 2
GI8033: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-291-1085

5120-14-293-1765

5120-14-523-3789
Douille Porte Injec

145233789
D-27: RNCC: 3 | RNVC: 2
D27: RNCC: 5 | RNVC: 2

12 Jan 2001

5120-14-207-4933
Cle Pour Cone De So

142074933
8810027000: RNCC: 3 | RNVC: 2
881-0-027-000: RNCC: 3 | RNVC: 2
6-10-439-0: RNCC: 5 | RNVC: 2

1 Jan 1964

5120-14-313-4677
Composition Garage

143134677
W15B: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-307-2473
Entraineur Manuel

143072473
RT6355: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-322-0798
Socket Wrench Socket

143220798
90452: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-329-6297
Extracteur Hydrauli

143296297
MS1312: RNCC: 3 | RNVC: 2
MS1312: RNCC: 5 | RNVC: 9

2 Jul 1975

5120-14-352-7158
Retaining Ring Pliers

143527158
191-21: RNCC: 3 | RNVC: 2
3272670244269: RNCC: 5 | RNVC: 2

14 Nov 1978

5120-14-441-2845
Spanner Wrench

144412845
94AM066: RNCC: 3 | RNVC: 2

22 Aug 1990

5120-14-290-4574

5120-14-356-4653

5120-14-287-1811

5120-14-328-6716
Screwdriver Bit

143286716
RE7: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-442-2390
Face Spanner Wrench Socket

144422390
C46043: RNCC: 3 | RNVC: 2

3 Oct 1990

5120-14-430-3449
Preformed Packing Inserter

144303449
RT17387: RNCC: 3 | RNVC: 2

15 Mar 1989

5120-14-534-6706
Hand Tube Swaging Punch

145346706
2526 216: RNCC: 3 | RNVC: 2
XX070126: RNCC: 6 | RNVC: 9

2 Apr 2003

5120-14-232-0474
Flat Tip Screwdriver

142320474
AF: RNCC: 3 | RNVC: 2
91348996: RNCC: 5 | RNVC: 2
0177298M00: RNCC: 5 | RNVC: 2
3148510050003: RNCC: 5 | RNVC: 2
MUP6198: RNCC: 5 | RNVC: 2
0005000: RNCC: 5 | RNVC: 9
5000AF: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-439-2012
Spanner Wrench

144392012
16350040: RNCC: 3 | RNVC: 2

25 Apr 1990

5120-14-312-1676

5120-14-304-3150
Cone De Montage

143043150
S16-0607-0812: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-284-3380
Cle Presse-Etoupe

142843380
R28019SM1: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-425-9232
Mandrin Montage

144259232
X6MCAAMX167324REPAM008: RNCC: 3 | RNVC: 2
60917167: RNCC: 5 | RNVC: 2

28 Jul 1988

5120-14-425-9520
Appareil Pour Appui

144259520
500350ETH20M2: RNCC: 3 | RNVC: 2

28 Jul 1988

5120-14-406-6410
Extraction Outil

144066410
OUT9337: RNCC: 3 | RNVC: 2
0UT9337: RNCC: 5 | RNVC: 2

8 Jan 1986

5120-14-574-8253
Seal Inserter Set

145748253
41.300.020: RNCC: 3 | RNVC: 2
41300020: RNCC: 5 | RNVC: 2

19 Feb 2013

5120-14-481-2074
Flat Tip Screwdriver

144812074
AZ.5,5X150: RNCC: 3 | RNVC: 2
1092103C00: RNCC: 5 | RNVC: 2
176-0775: RNCC: 5 | RNVC: 2
213/173/2: RNCC: 5 | RNVC: 2
3148510133928: RNCC: 5 | RNVC: 2
AZ-5,5X150: RNCC: 5 | RNVC: 2
0013392: RNCC: 5 | RNVC: 9
FACOMAZ.5,5X150: RNCC: 5 | RNVC: 9

25 Apr 1996

5120-14-383-2755
Montage Demmancheme

143832755
19843J: RNCC: 3 | RNVC: 2

17 Mar 1983

5120-14-396-1775
Emmanchemen Mandrin

143961775
5000263016: RNCC: 3 | RNVC: 2
5000263016: RNCC: 5 | RNVC: 9
5000263016: RNCC: 6 | RNVC: 9

27 Nov 1984

5120-14-432-7181
Plastique Jet

144327181
OUT50101: RNCC: 3 | RNVC: 2
0UT50101: RNCC: 5 | RNVC: 2

21 Jun 1989

5120-14-575-3694
Open End Wrench

145753694
13-20X22: RNCC: 3 | RNVC: 2

2 Apr 2013

5120-14-541-3761
Open End Wrench

145413761
344162610: RNCC: 3 | RNVC: 2

3 Jun 2004

5120-14-550-8776
Bearing And Bushing Remover

145508776
8817739000: RNCC: 3 | RNVC: 2

25 Jul 2006

5120-14-233-6940

5120-14-262-2019

5120-14-386-4876
Fusee Fausse

143864876
F46136: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-272-4043

5120-14-380-6459

5120-14-490-8759
Cle

144908759
4065 030 001 333: RNCC: 3 | RNVC: 2
F300 0T 000 5017: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-463-2590
Cle Speciale

144632590
10207116: RNCC: 3 | RNVC: 2

4 Jun 1993

5120-14-389-8936

5120-14-290-6503
Cle Demarreur

142906503
RT8596B: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-354-6753
Indicateur Rotation

143546753
25145003000: RNCC: 3 | RNVC: 2
251450030: RNCC: 5 | RNVC: 9

31 Jan 1979

5120-14-578-3136
Inserter And Remove

145783136
TM5478G001: RNCC: 3 | RNVC: 2

19 Nov 2013

5120-14-410-3486
Montage Reparation

144103486
800A970700: RNCC: 3 | RNVC: 2

18 Jun 1986

5120-14-293-9197

5120-14-239-8919

5120-14-466-0935
Socket Head Screw Key

144660935
65-3-03-045G00-626318C: RNCC: 3 | RNVC: 2
0413812P00: RNCC: 5 | RNVC: 2
91572542: RNCC: 5 | RNVC: 2

27 Oct 1993

5120-14-371-8034
Outil Pose Mors

143718034
7900-0100: RNCC: 3 | RNVC: 2
47G14-1: RNCC: 5 | RNVC: 2
7900-0100: RNCC: 5 | RNVC: 2
85-691-4224: RNCC: 6 | RNVC: 9

5 Aug 1981

5120-14-334-1688
Serrage Axe Outil

143341688
TF10A71304: RNCC: 3 | RNVC: 2
85-688-4607: RNCC: 6 | RNVC: 9

23 Apr 1976

5120-14-246-7762

5120-14-322-5918

5120-14-563-4259
Ratchet Wrench Set

145634259
MOD.67XL: RNCC: 3 | RNVC: 2

8 Feb 2010

5120-14-230-5514

5120-14-202-9294

5120-14-316-7510

5120-14-459-0723
Clips

144590723
DLP757420: RNCC: 3 | RNVC: 2
5016AT3: RNCC: 5 | RNVC: 2

18 Nov 1992

5120-14-405-5078
Cle De Diaphragme

144055078
520405-80: RNCC: 3 | RNVC: 2

27 Nov 1985

5120-14-273-8172

5120-14-225-5598
Extracteur Pour Cou

142255598
42632: RNCC: 3 | RNVC: 2
42632A: RNCC: 5 | RNVC: 2

1 Jan 1966

5120-14-461-6916
Patte Ancrage

144616916
PL1DA002OR902004B: RNCC: 3 | RNVC: 2

22 Mar 1993

5120-14-229-1753
Tournevis Six Pans

142291753
12200687: RNCC: 3 | RNVC: 2
12200687: RNCC: 3 | RNVC: 9

1 Jan 1967

5120-14-461-8154
Carte Support

144618154
2307-128-000: RNCC: 3 | RNVC: 2
2307-128-000: RNCC: 5 | RNVC: 2

29 Mar 1993

5120-14-366-8697

5120-14-396-0345
Outil Dalignement

143960345
BEL1344: RNCC: 3 | RNVC: 2

27 Nov 1984

5120-14-333-7375

5120-14-284-7452

5120-14-565-4211
Spanner Wrench

145654211
223758480: RNCC: 3 | RNVC: 2
223758480: RNCC: 5 | RNVC: 9
223758480: RNCC: 5 | RNVC: 9

17 Aug 2010

5120-14-218-0351

5120-14-466-0010
Spanner Wrench

144660010
0XB501-520-020-10R: RNCC: 3 | RNVC: 2

27 Oct 1993

5120-14-245-1759
Cle Speciale

142451759
G1-15-694: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-459-6420
Cle Speciale

144596420
312-04918-001-W26H2: RNCC: 3 | RNVC: 2

10 Dec 1992

5120-14-338-4685
Bague Darret

143384685
PR47247: RNCC: 3 | RNVC: 2

6 Nov 1976

5120-14-297-1225

5120-14-318-8872

5120-14-448-7831
Seal Inserter And Remover

144487831
76038: RNCC: 3 | RNVC: 2
89280494: RNCC: 5 | RNVC: 2

10 Jul 1991

5120-14-521-4350
Socket Wrench Socket

145214350
45641137: RNCC: 3 | RNVC: 2

26 Jul 2000

5120-14-276-3523
Montage De Ressort

142763523
45252: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-404-5810
Bushing Extracting Pliers

144045810
043-10-00-001M1: RNCC: 3 | RNVC: 2

20 Nov 1985

5120-14-243-6921

5120-14-366-8474
De Centrage Obus

143668474
30MS089-0000002: RNCC: 3 | RNVC: 2

20 Nov 1980

5120-14-493-4775
Cle

144934775
239833N: RNCC: 3 | RNVC: 2
F300 0T 013 1898: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-436-0294
Course Dispositif

144360294
RT32482: RNCC: 3 | RNVC: 2

29 Nov 1989

5120-14-220-8543
Cle Col De Cygne Sp

142208543
PR46495: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-417-5778
Hand Terminal Crimping Tool

144175778
601075: RNCC: 3 | RNVC: 2
476399-1: RNCC: 3 | RNVC: 9

15 Jul 1987

5120-14-249-9704
Socket Wrench Screwdriver Attachment

142499704
JT.7: RNCC: 3 | RNVC: 2
3148515062803: RNCC: 5 | RNVC: 2
JT7: RNCC: 5 | RNVC: 2
0506280: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-482-3214
Socket Wrench Extension

144823214
J.210S: RNCC: 3 | RNVC: 2
3148510289052: RNCC: 5 | RNVC: 2
J.211: RNCC: 5 | RNVC: 2
J211: RNCC: 5 | RNVC: 2
CAE00919: RNCC: 5 | RNVC: 2
0028905: RNCC: 5 | RNVC: 9

4 Jul 1996

5120-14-325-6120
Noix De Cle

143256120
470443: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-322-9747

5120-14-449-1165
Face Spanner Wrench Socket

144491165
0UT126: RNCC: 3 | RNVC: 2
85-694-6230: RNCC: 6 | RNVC: 9

31 Jul 1991

5120-14-384-2934
Cle Speciale

143842934
OUT-242: RNCC: 3 | RNVC: 2

4 May 1983

5120-14-486-5687
Outil

144865687
RT22434: RNCC: 3 | RNVC: 2

25 Mar 1997

5120-14-490-8962
Mordach

144908962
4067 640 000 567: RNCC: 3 | RNVC: 2
F300 0T 000 5249: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-285-2230
Spanner Wrench

142852230
RU253-5M946-2A1: RNCC: 3 | RNVC: 2
253-5M946-2A1: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-241-6010

5120-14-321-8092

5120-14-546-7353
Spanner Wrench

145467353
251724763: RNCC: 3 | RNVC: 2

9 Aug 2005

5120-14-462-9856
Face Spanner Wrench Socket

144629856
T700A5599000001: RNCC: 3 | RNVC: 2

12 May 1993

5120-14-520-9483
Adjustable Wrench

145209483
99355124: RNCC: 3 | RNVC: 2

23 Jun 2000

5120-14-449-2210
Hand Storage Battery Carrier

144492210
5000710732: RNCC: 3 | RNVC: 2

7 Aug 1991

5120-14-516-6623
Adjustable Wrench

145166623
104135700: RNCC: 3 | RNVC: 2

8 Oct 1999

5120-14-503-4710
Electronic Component Inserter And Remover

145034710
39546823: RNCC: 3 | RNVC: 2

14 Jan 1998

5120-14-247-7249

5120-14-490-8680
Meche

144908680
4057 020 003 460: RNCC: 3 | RNVC: 2
F300 0T 000 4918: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-433-3256
Outillage Mandrin

144333256
540055: RNCC: 3 | RNVC: 2
00540055: RNCC: 5 | RNVC: 2

19 Jul 1989

5120-14-310-7614

5120-14-307-2763
Gabarit De Percage

143072763
470669: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-535-5417
Tube Pour Extracteu

145355417
5000261457: RNCC: 3 | RNVC: 2

3 Jun 2003

5120-14-293-3054

5120-14-363-5826

5120-14-241-6065
Mandrin De Preserti

142416065
FF6X8N: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-332-3840
Face Spanner Wrench Socket

143323840
M31-091: RNCC: 3 | RNVC: 2
M31091: RNCC: 5 | RNVC: 2
M31-091: RNCC: 5 | RNVC: 9

2 Jul 1975

5120-14-204-4434
Cle Du Bouchon

142044434
80900-20: RNCC: 3 | RNVC: 2
823137: RNCC: 3 | RNVC: 2
77175A: RNCC: 5 | RNVC: 2
823137: RNCC: 5 | RNVC: 2
77175: RNCC: 5 | RNVC: 2
823137: RNCC: 5 | RNVC: 9
85-598-4091: RNCC: 6 | RNVC: 9
85-598-4101: RNCC: 6 | RNVC: 9

1 Jan 1963

5120-14-247-9638

5120-14-421-7740
Bearing And Bushing Inserter And Remover

144217740
TOP7R4A1: RNCC: 3 | RNVC: 2
T0P7R4A1: RNCC: 5 | RNVC: 2

27 Jan 1988

5120-14-302-6693
Open End Wrench

143026693
RACD22: RNCC: 3 | RNVC: 2
RACD22: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-367-5648
Hand Lead Seal Press

143675648
003532011P: RNCC: 3 | RNVC: 2
6457402: RNCC: 5 | RNVC: 9

19 Jan 1981

5120-14-425-9627
Coquille D'arrachem

144259627
6168: RNCC: 3 | RNVC: 2

28 Jul 1988

5120-14-344-3874

5120-14-227-3153
Grain

142273153
958690: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-239-5206

5120-14-360-5603

5120-14-266-5580

5120-14-578-2086
Inserter And Remove

145782086
8818171002: RNCC: 3 | RNVC: 2

12 Nov 2013

5120-14-572-1140
Pliers

145721140
DM.CC: RNCC: 3 | RNVC: 2
3148517707344: RNCC: 5 | RNVC: 2
770734: RNCC: 5 | RNVC: 2

8 Jun 2012

5120-14-272-3743

5120-14-309-7825

5120-14-240-3876

5120-14-393-0290
Combination Box And Open End Wrench

143930290
41.32: RNCC: 3 | RNVC: 2
3148511013793: RNCC: 5 | RNVC: 2
41-32: RNCC: 5 | RNVC: 2

12 Apr 1984

5120-14-561-9361
Oil Filter Wrench

145619361
TG70: RNCC: 3 | RNVC: 2

17 Sep 2009

5120-14-431-8493
Socket Wrench Screwdriver Attachment

144318493
46MS146: RNCC: 3 | RNVC: 2

10 May 1989

5120-14-201-8782

5120-14-410-0136
Mandrin De Pose

144100136
8813033000: RNCC: 3 | RNVC: 2

4 Jun 1986

5120-14-247-3929
Ensemble De Sertiss

142473929
8459-134 900: RNCC: 3 | RNVC: 2
8459-134: RNCC: 3 | RNVC: 9

1 Jan 1968

5120-14-285-6413

5120-14-318-5518

5120-14-558-9324
Six Point Tip Screwdriver

145589324
ANXP9X75: RNCC: 3 | RNVC: 2
775519: RNCC: 3 | RNVC: 2
3148517755192: RNCC: 5 | RNVC: 2

24 Nov 2008

5120-14-278-5033

5120-14-283-2516

5120-14-299-4509

5120-14-427-6061
Desaimant Ventouse

144276061
60012: RNCC: 3 | RNVC: 2

26 Oct 1988

5120-14-425-9263
Manchon Emmanchemen

144259263
600122: RNCC: 3 | RNVC: 2

28 Jul 1988

5120-14-396-2236
Gap Fixati Spec Cle

143962236
199413: RNCC: 3 | RNVC: 2

27 Nov 1984

5120-14-247-4467
Tirevessie Pour Acc

142474467
200239-03600: RNCC: 3 | RNVC: 2
0U3972: RNCC: 5 | RNVC: 2
0U3972TYPE20ET30: RNCC: 5 | RNVC: 2
200239-00000: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-491-0316
Cle

144910316
13-005B13: RNCC: 3 | RNVC: 2
F300 0T 001 1245: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-442-6827
Screwdriver Bit

144426827
000-0100A: RNCC: 3 | RNVC: 2

24 Oct 1990

5120-14-292-7395
Screwdriver Bit Holder

142927395
R294: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-490-0602
Machinist's Scriber Point Kit

144900602
234S.P2: RNCC: 3 | RNVC: 2
0154715: RNCC: 5 | RNVC: 2
3148511547151: RNCC: 5 | RNVC: 2

10 Sep 1997

5120-14-483-1894
Face Spanner Wrench Socket

144831894
1122444A00: RNCC: 3 | RNVC: 2

22 Aug 1996

5120-14-476-3289
Ring Retaining Pliers Tip Set

144763289
490A.E2: RNCC: 3 | RNVC: 2
3148511796269: RNCC: 5 | RNVC: 2

7 Jun 1995

5120-14-234-6328

5120-14-322-5917
Open End Wrench

143225917
35-4BA: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-432-3873
Spanner Wrench

144323873
548073: RNCC: 3 | RNVC: 2
00548073: RNCC: 5 | RNVC: 2

7 Jun 1989

5120-14-236-8105
Adjustable Wrench

142368105
300: RNCC: 2 | RNVC: 2

1 Jan 1967

5120-14-385-9785
Spanner Wrench

143859785
0411-60114: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-542-4944
Screwdriver Bit Set And Handle

145424944
AMD.J3: RNCC: 3 | RNVC: 2
0500488: RNCC: 5 | RNVC: 2
YB000140: RNCC: 6 | RNVC: 9

21 Jul 2004

5120-14-280-3993
Mechanical Puller Step Plate

142803993
521108: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-516-6012
Retaining Ring Pliers

145166012
169G.23: RNCC: 3 | RNVC: 2
169G.23: RNCC: 5 | RNVC: 2

6 Oct 1999

5120-14-394-9564
Plateau Abattant

143949564
20735705: RNCC: 3 | RNVC: 2

2 Oct 1984

5120-14-314-6425

5120-14-302-5060

5120-14-298-4549

5120-14-427-1119
Outillage Mandrin

144271119
530533: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-248-3540
Outil Controle Cour

142483540
ME1027: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-410-3534
Ve De Controle

144103534
800A281700: RNCC: 3 | RNVC: 2

18 Jun 1986

5120-14-506-7664
De Montage Outil

145067664
M13440: RNCC: 3 | RNVC: 2

14 May 1998

5120-14-228-5912

5120-14-031-9587
Joint Obus Montage

140319587
STM06643: RNCC: 3 | RNVC: 2
STM066-43: RNCC: 5 | RNVC: 2
STM06643: RNCC: 5 | RNVC: 2

5 Jul 1980

5120-14-271-6093
Open End Wrench

142716093
E74-301-110: RNCC: 2 | RNVC: 2
69-110: RNCC: 3 | RNVC: 2
E74301C110WWF: RNCC: 5 | RNVC: 1
3272670256200: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-253-9727
Cone De Guidage

142539727
C46282: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-458-6304
Fourche

144586304
M4HZ7101930421: RNCC: 3 | RNVC: 2

29 Oct 1992

5120-14-564-1112
Valve Spring Compressor

145641112
4C-6726: RNCC: 3 | RNVC: 2

8 Apr 2010

5120-14-405-1550
Support De Reglage

144051550
777BE/LOG: RNCC: 3 | RNVC: 2

27 Nov 1985

5120-14-289-8455
Hand Terminal Crimping Tool

142898455
46673: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-371-6447
Open End Wrench

143716447
16817926: RNCC: 3 | RNVC: 2

5 Aug 1981

5120-14-457-9804
Socket Wrench Socket

144579804
600006: RNCC: 3 | RNVC: 2

2 Oct 1992

5120-14-297-4274
Combination Box And Open End Wrench Set

142974274
0528500: RNCC: 3 | RNVC: 2
40.JN6: RNCC: 5 | RNVC: 2
40JN6: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-399-7119
Blacksmith's Vise

143997119
116: RNCC: 3 | RNVC: 2
DOL116: RNCC: 5 | RNVC: 9

6 Mar 1985

5120-14-244-2392

5120-14-539-3152
Mechanical Puller Attachment

145393152
T651G3005222: RNCC: 3 | RNVC: 2

22 Dec 2003

5120-14-349-6043
Etrier Reglage Crem

143496043
215071: RNCC: 3 | RNVC: 2

22 May 1978

5120-14-236-2091

5120-14-233-7610
Cle En Deux Parties

142337610
15137T2: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-280-1391

5120-14-234-8120
Cle Speciale

142348120
25547: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-235-3900

5120-14-247-9799
Adaptateur De Maint

142479799
160-71960-03: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-309-7470
Outillage Demmanche

143097470
341A98-2039-00: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-248-1279

5120-14-234-3356

5120-14-304-4407
Rotating Members Aligning Tool

143044407
8810014087: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-490-8681
Meche

144908681
4057 020 003 461: RNCC: 3 | RNVC: 2
F300 0T 000 4919: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-237-6857

5120-14-222-1403

5120-14-407-7479
Soc Demont Outil

144077479
544080: RNCC: 3 | RNVC: 2

27 Feb 1986

5120-14-311-2038
Bague Emmanchement

143112038
33312: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-332-0459
Tendeur Lot Rechang

143320459
9070-986: RNCC: 3 | RNVC: 2

2 Jul 1975

Load More Results