What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.

A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Blacksmith's Punch?

A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Mechanical Finger?

A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.

A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Screwdriver And Wrench Assembly?

A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Stakeholder Bench Plate?

A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.

What is a Drill Drift?

A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.

A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Digging Bar?

A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

What is a Valve Spring Lifter?

A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.

What is a Fuse Puller?

A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.

Hand Tools, Nonedged, Nonpowered - France (FR)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by France (FR) - NCB is 14

Page 42 of 110

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by France

51	20	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - France (FR)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 16 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Pipe Vise? 19 Items: A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.
What is a Hand Vise? 25 Items: A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.
What is a Hand Hydraulic Jack? 133 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 153 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 903 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 17 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
Swage,Bottom,Blacksmith's 10 Items
What is a Hand Tube Flaring Tool? 23 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Blacksmith's Punch? 12 Items: A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.
What is a Drain Plug Wrench? 45 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 57 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 16 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 3829 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
Flatter,Blacksmith's 18 Items
Swage,Top,Blacksmith's 12 Items
What is a Pipe Wrench? 110 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 149 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 53 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
Screwdriver,Offset 54 Items
What is a Screwdriver Bit? 707 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Mechanical Finger? 25 Items: A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.
What is a Socket Wrench Socket? 1803 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 1412 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 1641 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 52 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 565 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
Jack,Push-Pull,Screw 30 Items
What is a Hand Tube Bender? 54 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 1106 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 55 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pinch Bar? 19 Items: A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.
What is a Pry Bar? 17 Items: A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.
What is a Wrecking Bar? 15 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 273 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 413 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 32 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 295 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
Face,Hammer,Inserted 25 Items
What is a Hole Sheet Metal Holder? 37 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Screwdriver And Wrench Assembly? 11 Items: A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.
What is a Hand Rivet Set? 121 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Stakeholder Bench Plate? 22 Items: A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.
What is a Drill Drift? 32 Items: A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.
What is a Tack Claw? 15 Items: A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.
Mattock 28 Items
What is a Socket Wrench Handle Bar? 108 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Stake,Sheet Metalworking 50 Items
Riveter,Blind,Hand 76 Items
What is a Hand Shovel? 43 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 98 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 30 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
What is a Digging Bar? 20 Items: A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.
Block,Dolly,Sheet Metalworking 56 Items
What is a Piston Ring Compressor? 34 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Valve Spring Lifter? 29 Items: A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.
What is a Fuse Puller? 20 Items: A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.
What is a Hand Lead Seal Press? 18 Items: A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.
What is a Hand Beading Tool? 91 Items: A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.
What is a Hand Hammer? 502 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
Head,Hand Hammer 81 Items
What is a Lamp Extractor? 76 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Tube Packing Ring Installing Tool? 29 Items: A Tube Packing Ring Installing Tool (INSTALLING TOOL,TUBE PACKING RING) is an item designed to insert packing rings on tubes within tube sheets on condensers and similar heat exchangers. In operation, the packing rings are assembled on the loading pin mandrel and are then transferred from the mandrel on to the tube by means of a tubular sleeve which slides on the mandrel.
What is a Carpenters' Pincers? 18 Items: A Carpenters' Pincers (PINCERS,CARPENTERS') is a plierlike hand tool having two opposing jaws which may have hammerlike backs. One handle has a nail or tack pulling claw, the other is shaped to form a screwdriver. The tool may contain a wire cutter. See also NIPPERS, END CUTTING and PINCERS, FARRIERS'.
What is a Trowel? 33 Items: A Trowel is a tool used for bricklaying, concrete work, plastering, linoleum laying, and masonry work. Excludes CORNER TOOL, CONCRETE.
What is a Hand Abrasive Wheel Dresser? 12 Items: A Hand Abrasive Wheel Dresser (DRESSER,ABRASIVE WHEEL,HAND) is a tool designed to remove glaze from, dress, shape, sharpen, and true solid abrasive wheels. Excludes NIB, DIAMOND, WHEEL DRESSING.
What is a Lamp Cap Extractor? 32 Items: A Lamp Cap Extractor (EXTRACTOR,LAMP CAP) is a tool specifically designed to facilitate the removal of lamp caps from switchboards, panels or indicator lamps.
What is a Rivet Bucking Bar? 51 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 86 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 277 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Woven Cable Grip? 23 Items: A Woven Cable Grip (GRIP,CABLE,WOVEN) is a braided wire device designed to clutch a bare or insulated conductor, cable or wire rope, for holding taut or drawing through conduit.
What is a Screw Thread Insert Extractor? 19 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is an Electron Tube Extractor? 18 Items: An Electron Tube Extractor (EXTRACTOR,ELECTRON TUBE) is a hand tool designed to facilitate the removal of electron tubes from electronic equipment and to avoid burning the fingers. It may be used for installing tubes.
What is a Cross Tip Screwdriver? 362 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 21 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 11 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 37 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Tool Handle Wedge? 10 Items: A Tool Handle Wedge (WEDGE,TOOL HANDLE) is excludes WEDGE, WOOD.
What is a Marlinespike? 16 Items: A Marlinespike is a metal hand tool made in the shape of a tapered pin. One end is pointed and the opposite end may be headed. The body may contain an eye for a lanyard sling, or be grooved lengthwise. Excludes CABLE PICK and FID.
What is an Aligning Punch? 272 Items: An Aligning Punch (PUNCH,ALIGNING) is a round, square, hexagonal or octagonal bodied hand tool, having a round tapered section 6-1/2 inches (165.1 mm) or more in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, DRIFT and DRIFTPIN.
What is a Drift Punch? 25 Items: A Drift Punch (PUNCH,DRIFT) is a round, square, hexagonal, or octagonal bodied hand tool, having a round tapered section 4 to 6 inches (101.6 mm to 152.4 mm) inclusive in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, ALIGNING; and DRIFTPIN.
What is a Putty Knife? 36 Items: A Putty Knife (KNIFE,PUTTY) is a hand tool with a nonedged blade fixed to a handle for laying on and smoothing putty and the like.
What is a Socket Wrench Adapter-Extension? 40 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 30 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 184 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Socket Wrench Ratchet Attachment? 47 Items: A Socket Wrench Ratchet Attachment (RATCHET ATTACHMENT,SOCKET WRENCH) is a connection for socket wrenches and handles. Consists of a ratcheting mechanism with an internal drive on one end and an external drive on the opposite end of the same size. The item is designed to permit continuous rotation of the socket in one direction without removing the socket or handle and without a complete rotation of the handle.
What is a Wrench Extension Handle? 81 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Socket Wrench Crowfoot Attachment? 155 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 33 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 43 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 48 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 2394 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 372 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 300 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 661 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 32 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand-Operated Grommet And Eyelet Press? 12 Items: A Hand-Operated Grommet And Eyelet Press (PRESS,GROMMET AND EYELET,HAND-OPERATED) is a device which punches or pierces holes and in addition fastens or sets eyelets and grommets in cloth, paper and similar material. May be used for fastening or setting rivets, lacing hooks and snaps in cloth, paper and similar material. It is hand operated by lever or screw action. See also PUNCH, EYELET, PLIER TYPE and PRESS, GROMMET AND EYELET, FOOT OPERATED.
What is a Claw Bar? 19 Items: A Claw Bar (BAR,CLAW) is before using, refer to Reference Drawing Group AG.
What is a Shock Type Wheel Stud Nut Wrench? 11 Items: A Shock Type Wheel Stud Nut Wrench (WRENCH,WHEEL STUD NUT,SHOCK TYPE) is a manually operated item designed to remove wheel stud nuts. In operation the inner nut is turned by a socket attached to a shaft on which is a loose swinging weighted handle. The weighted handle may be swung quickly to provide an impact force against the socket to loosen the seized or jammed nuts. The outer nut is held stationary by a separate hexagonal holding wrench.
What is a Drift Pin Set? 30 Items: A Drift Pin Set is a group of DRIFTPIN having different characteristics.
What is a Tire Iron? 25 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 115 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Blacksmith's Vise? 14 Items: A Blacksmith's Vise (VISE,BLACKSMITH'S) is a clamping device consisting of a mounting plate, one stationary and one manual screw actuated jaw and a supporting member extending downward from the stationary jaw to the floor. Designed to be mounted on a bench, table or the like. May include pipe holding jaws.
What is a Machinist's Vise? 64 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Clamp Base Bench Vise? 10 Items: A Clamp Base Bench Vise (VISE,BENCH,CLAMP BASE) is a clamping device consisting of a base, one stationary and one manual screw actuated jaw, and one or more guide bars or rods. Designed with an integral clamp for attaching to a bench, table, or the like. Does not include pipe holding jaws.
What is a Fixed Open End Wrench Set? 86 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Nail Set? 11 Items: A Nail Set is a round knurled, square, hexagonal or octagonal bodied hand tool having a round tapered section terminating in a cupped point. It is designed to set brad head nails below the surface by striking it a hammerlike blow. See also PUNCH, DRIVE PIN.
What is a Socket Wrench Set? 202 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is an Open End Box Wrench Set? 10 Items: An Open End Box Wrench Set (WRENCH SET,OPEN END BOX) is a group of WRENCH, OPEN END BOX having different characteristics.
What is a Combination Box And Open End Wrench Set? 72 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Box Wrench Set? 36 Items: A Box Wrench Set (WRENCH SET,BOX) is a group of box wrenches having different characteristics. It may include a HANDLE, EXTENSION WRENCH. See also WRENCH SET, COMBINATION, BOX AND OPEN END.
What is a Hot Line Stick? 26 Items: A Hot Line Stick is a hand tool consisting of a straight, round stick (pole) made of a suitable nonconductive material with a tool fixed to one end. The other end may be plain or have a butt mounting device fixed to it. Various types of attachments (hooks, rings, and bands) may be fixed to the body. It is designed for use in the repair and maintenance of live high voltage aerial lines. Excludes hot line sticks without heads.
Handle,Mattock-Pick 15 Items
What is a Wrench Kit? 73 Items: A Wrench Kit is an assortment of various types and sizes of wrenches such as SOCKET, SOCKET WRENCH; WRENCH, OPEN END, FIXED; WRENCH, BOX and the like. It may include adapter(s), ratchet(s) and the like. See also WRENCH SET (as modified.
What is a Brad Awl? 15 Items: A Brad Awl (AWL,BRAD) is a small, pointed tool used by shoemakers, saddlers, cabinetmakers, and the like for piercing small holes in wood, leather, and similar materials, and consists of a handle with a ferrule and a blade. The blade is round, terminating in a beveled, sharp straight edge and has a shank which passes through the center of the handle.
What is a Scratch Awl? 20 Items: A Scratch Awl (AWL,SCRATCH) is an item whose nominal length of blade is less than 4 inches (101.6 millimeters) and is provided with a nondetachable handle.
What is a Screw Extractor Set? 10 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 102 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
Jack,Scissors,Hand 26 Items
What is a Piston Ring Expander? 23 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
Mallet,Plastic 62 Items
Mallet,Rubber 10 Items
What is a Wood Mallet? 37 Items: A Wood Mallet (MALLET,WOOD) is excludes MALLET, CALKING; MALLET, HAWSING and MALLET, SERVING.
What is a Rack Bar Jack? 30 Items: A Rack Bar Jack (JACK,RACK BAR) is excludes JACK, BUMPER and JACK, REEL, HAND.
What is a Pneumatic Tire Valve Core Inserter And Remover? 14 Items: A Pneumatic Tire Valve Core Inserter And Remover (INSERTER AND REMOVER,PNEUMATIC TIRE VALVE CORE) is a bar of steel having a small cylindrical slotted end for removing or installing a valve core in a valve stem by a screwing motion. See also REPAIR TOOL, PNEUMATIC TIRE VALVE.
What is a Hand Tube Swaging Tool Kit? 20 Items: A Hand Tube Swaging Tool Kit (SWAGING TOOL KIT,TUBE,HAND) is a hand-operated noncutting tool consisting of one or more PUNCH, TUBE SWAGING, HAND and a tube flaring bar.
What is a Hand Tube Flaring Punch? 11 Items: A Hand Tube Flaring Punch (PUNCH,TUBE FLARING,HAND) is a noncutting tool having a shaped end or section designed to flare the ends of tubes. One type is designed to flare the ends of tubes against a tube sheet, and another to flare tube ends to mate with tube fittings. Includes punch components of FLARING TOOL, TUBE, HAND.
What is a Hose Strap Band Clamping Tool? 26 Items: A Hose Strap Band Clamping Tool (CLAMPING TOOL,STRAP BAND,HOSE) is an item designed to tension and lock metal straps around a rubber hose, and the like. It is also used to clamp and hold fittings therein.
What is a Mechanical Puller? 3073 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 470 Items
What is a Slip Joint Pliers? 84 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Brake Repair Pliers? 14 Items: A Brake Repair Pliers (PLIERS,BRAKE REPAIR) is a tool having jaws designed for use in brake repair operations, such as removing and replacing items such as keys, springs, and the like. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 226 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 12 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 81 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 56 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 15 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 11 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 29 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Cross Tip Screwdriver Set? 14 Items: A Cross Tip Screwdriver Set (SCREWDRIVER SET,CROSS TIP) is a group of SCREWDRIVER, CROSS TIP having different characteristics.
What is a Spanner Wrench Set? 18 Items: A Spanner Wrench Set (WRENCH SET,SPANNER) is a group of items under WRENCH, SPANNER having different characteristics.
What is a Drive Pin Punch Set? 31 Items: A Drive Pin Punch Set (PUNCH SET,DRIVE PIN) is a group of PUNCH, DRIVE PIN having different characteristics.
What is an Aligning Punch Set? 13 Items: An Aligning Punch Set (PUNCH SET,ALIGNING) is a group of PUNCH, ALIGNING having different characteristics. See also DRIFTPIN SET.
What is a Slugging Type Box Wrench Socket? 16 Items: A Slugging Type Box Wrench Socket (SOCKET,SLUGGING TYPE BOX WRENCH) is an item having a hexagonal external drive at one end, made to fit into the internal hexagonal or 12-point opening of a slugging type box wrench. The opposite end has a single-broached hexagonal opening of the same size as the external drive. The item is designed with extra thick walls to withstand the impact of sledge blows on the driving wrench.
What is a Mechanical Puller Step Plate? 44 Items: A Mechanical Puller Step Plate (STEP PLATE,MECHANICAL PULLER) is a circular disk, flanged to provide a shoulder, and designed to provide a base for the screw point of a PULLER, MECHANICAL when pulling externally mounted bearings, gears, and the like from hollow shafts or housings. It has a concentric, countersunk hole to accommodate the puller screw point.
What is a Solid Center Punch? 79 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Cable Type Ratchet Lever Puller? 20 Items: A Cable Type Ratchet Lever Puller (PULLER,RATCHET LEVER,CABLE TYPE) is an item consisting of a metal frame and ratchet lever reel to which is attached one end of a flexible cable (wire rope). The cable feeds through the fast eye in the metal frame, and may be reeved through a slip hook tackle hook. See also BINDER, LOAD; HOIST, WIRE ROPE and STRETCHER, WIRE.
What is an Electronic Equipment Tuning Wand? 18 Items: An Electronic Equipment Tuning Wand (TUNING WAND,ELECTRONIC EQUIPMENT) is a hand-held rod used in determining the adjustment of the windings of a radio frequency coil. It is made of insulating material with iron on one end and brass on the other end. By inserting the iron end in the coil, the inductance is increased and by inserting the brass end, the inductance is decreased.
What is a Combination Open End And Spanner Wrench? 14 Items: A Combination Open End And Spanner Wrench (WRENCH,OPEN END AND SPANNER,COMBINATION) is a tool having open end wrench characteristics at one end and spanner wrench features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s) at the other end.
What is a Detent Handling Tool? 187 Items: A Detent Handling Tool (HANDLING TOOL,DETENT) is a specially designed handling tool consisting of a rigid bar with a T-handle on one end. The other end is equipped with threads designed to mate the threads of a detent to facilitate inserting or extracting.
What is a Hand Material Handling Hook? 23 Items: A Hand Material Handling Hook (HOOK,MATERIAL HANDLING,HAND) is a hook whose curved end conforms to Style AP1, AP2, AP3 or AP4 of Reference Drawing Group AP. Excludes HOOK, MANHOLE COVER, HAND; HOOK, WIRE BREAKING, HAND; HOOK, ROCK CRUSHER FEEDING, HAND; HOOK, STRAINER REMOVING, HAND and HOOKS, BAG HANDLING, HAND.
What is a Magnetic Retrieving Tool? 11 Items: A Magnetic Retrieving Tool (RETRIEVING TOOL,MAGNETIC) is a hand-operated magnetic device used to locate and pick up metallic articles, such as bolts, nuts, pins, washers, and the like, in confined spaces. It may be rigid, flexible or adjustable. Excludes FINGER, MECHANICAL.
What is a Mechanical Puller Adapter? 78 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Combination Box And Open End Box Wrench? 13 Items: A Combination Box And Open End Box Wrench (WRENCH,BOX AND OPEN END BOX,COMBINATION) is a double end wrench, box and open end box, primarily designed for removing or replacing tube fittings. The opening in the open end box may be machined at an angle from the longitudinal center line of the wrench.
What is a Screw Thread Insert Inserter? 136 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Flat Tip Screwdriver Set? 48 Items: A Flat Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP) is a group of SCREWDRIVER, FLAT TIP having different characteristics.
What is a Terminal Crimping Tool Contact Positioner? 89 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 16 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is an Adjustable Wrench? 138 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 239 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 75 Items
Handle,Shovel 10 Items
What is a Socket Wrench Spanner Attachment? 88 Items: A Socket Wrench Spanner Attachment (SPANNER ATTACHMENT,SOCKET WRENCH) is an item having an adjustable or fixed span with pin, hook, or key type end that is used to fit and turn various size retaining rings, cover plates, plugs, couplings, and like parts. Usually designed to be driven by a male driver.
What is a Retaining Ring Installation Tool? 44 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Tacker? 16 Items: A Tacker is a hand-operated, hammerlike or gunlike item without a clincher, used to drive preformed connecting elements like pins, nails or staples through one object or piece of material into another. Excludes STAPLER (as modified).
What is a Bearing And Bushing Inserter? 290 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 207 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 939 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 14 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 93 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 161 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 94 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 141 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 53 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Six Point Tip Screwdriver? 155 Items: A Six Point Tip Screwdriver (SCREWDRIVER,SIX POINT TIP) is a manual screwdriver having a single nonremoveable blade having a tip with six rounded points.
What is a Seal Inserter And Remover? 147 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 478 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is a Preformed Packing Inserter And Remover? 34 Items: A Preformed Packing Inserter And Remover (INSERTER AND REMOVER,PREFORMED PACKING) is a hand tool designed to install and remove a PACKING, PREFORMED.
What is a Pin Remover? 34 Items: A Pin Remover (REMOVER,PIN) is a hand tool designed to facilitate the removal of a pin from a hole.
What is a Pin Inserter And Remover? 13 Items: A Pin Inserter And Remover (INSERTER AND REMOVER,PIN) is a rodlike tool designed to facilitate the insertion and removal of a pin from a hole.
What is an Electrical Contact Inserter And Remover? 37 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Piston Inserter? 40 Items: A Piston Inserter (INSERTER,PISTON) is a tool designed to permit installation of a piston or piston assembly without damaging the packings or piston.
What is a Spring Inserter And Remover? 85 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 13 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Stud Inserter? 22 Items: A Stud Inserter (INSERTER,STUD) is a device designed to drive in studs. It does not have any facilities for removing or extracting studs. See also INSERTER AND REMOVER, STUD.
What is a Stud Inserter And Remover? 17 Items: A Stud Inserter And Remover (INSERTER AND REMOVER,STUD) is a group of items designed to extract and to drive studs. It may include collets, guides, housings, holders and the like. See also REMOVER SET, STUD and INSERTER, STUD.
What is a Gear Inserter? 54 Items: A Gear Inserter (INSERTER,GEAR) is a hand tool designed to install various gears onto a gearshaft. It may be operated by a pushing or a striking force.
What is a Crimping Tool Die? 73 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is an Electrical Connector Inserter? 45 Items: An Electrical Connector Inserter (INSERTER,ELECTRICAL CONNECTOR) is a hand tool designed to hold an electrical connector, and to assist in the positioning and installation of the connector on a cover, panel or the like.
What is a Float? 12 Items: A Float is a tool used for concrete, plastering and grouting work.
What is a Mechanical Puller Set? 19 Items: A Mechanical Puller Set (PULLER SET,MECHANICAL) is two or more separate PULLER, MECHANICAL of different fixed sizes.
What is a Lifting Pneumatic Bag? 11 Items: A Lifting Pneumatic Bag (PNEUMATIC BAG,LIFTING) is a device made of flexible material designed to lift another item by being placed under the item and being inflated with air or some other gas. It will have a means of being connected to an air or gas source and may include a connector hose, a control valve and/or a pressure regulator.
What is a Cable Tie Installation Tool? 22 Items: A Cable Tie Installation Tool (INSTALLATION TOOL,CABLE TIE) is a lightweight, hand-held, hand-operated tool designed to fasten cable ties, straps and the like. Cable tie is inserted into the nose of the tool flush to the cable tie head. Trigger handle tightens cable tie and cuts off any excess. These installation tools are available in a variety of sizes depending on their intended use with miniature, intermediate, standard, heavy or extra heavy cross section ties.
What is a Bearing Staking Installation Tool? 159 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
Wrench Set,Ratchet 15 Items
What is a Sealant Dispenser? 26 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Retaining Ring Pliers Set? 10 Items: A Retaining Ring Pliers Set (PLIERS SET,RETAINING RING) is a group of PLIERS, RETAINING RING having different characteristics.
What is a Hand Armament Subsystem Carrier? 52 Items: A Hand Armament Subsystem Carrier (CARRIER,ARMAMENT SUBSYSTEM,HAND) is a metallic item with a clamp device and/or space for depositing articles. It is used for transporting weapon parts during maintanence and/or repair work, such as gun barrel, automatic loader, breechblock and the like.
What is a Ring Retaining Pliers Tip Set? 13 Items: A Ring Retaining Pliers Tip Set (TIP SET,PLIERS,RING RETAINING) is a collection of removable metallic tips in matched pairs used to provide various size capablities to PLIERS, RING RETAINING which permits the removal and installation of internal and external retaining rings.
What is a Plug Electrical Connector Extractor? 45 Items: A Plug Electrical Connector Extractor (EXTRACTOR,ELECTRICAL CONNECTOR,PLUG) is a hand tool designed to disassemble CONNECTOR, PLUG, ELECTRICAL from a CONNECTOR, RECEPTACLE, ELECTRICAL.
What is a Torque Wrench Adapter Set? 10 Items: A Torque Wrench Adapter Set (ADAPTER SET,TORQUE WRENCH) is tWO or more ADAPTER, TORQUE WRENCH of different sizes.
What is an Electronic Component Inserter And Remover? 79 Items: An Electronic Component Inserter And Remover (INSERTER AND REMOVER,ELECTRONIC COMPONENT) is an item which can insert or remove an electronic component package such as MICROCIRCUIT; RESISTOR, NETWORK (as modified); and the like from its mounting position or socket. Excludes INSERTER AND REMOVER, ELECTRICAL CONTACT; REMOVER, ELECTRICAL CONTACT; EXTRACTOR, ELECTRICAL CARD; EXTRACTOR, ELECTRONIC CRYSTAL UNIT; EXTRACTOR, ELECTRON TUBE.
What is an Impact Type Bit Set And Handle Screwdriver? 14 Items: An Impact Type Bit Set And Handle Screwdriver (SCREWDRIVER,BIT SET AND HANDLE,IMPACT TYPE) is an item consisting of a set of screwdriver bits and a impact driver to accommodate the bits of various types and characteristics. It is designed to transmit a strong rotating movement by the impact of a hammer blowed on the impact driver. It is used to loosen rusted or seized screws. Excludes SCREWDRIVER, BIT SET AND HANDLE.
What is a Hand Vise Jaw? 19 Items: A Hand Vise Jaw (JAW,VISE,HAND) is an item consisting of two opposing parts of a VISE, HAND. The item is moveable and able to open and close. It can hold, grasp or clamp work.
What is a Screwdriver Handle? 28 Items: A Screwdriver Handle (HANDLE,SCREWDRIVER) is an item used to accommodate various types of BIT, SCREWDRIVER. It is designed to rotate a bit that is used for installing or removing screws.
What is a Wire Twister Pliers? 25 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 284 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is a Mechanical Puller Body? 45 Items: A Mechanical Puller Body (BODY,PULLER,MECHANICAL) is an item designed to support and enclose the internal parts of a PULLER,MECHANICAL.
What is a Flat Tip And Cross Tip Screwdriver Set? 39 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is a Socket Wrench Screwdriver Attachment Set? 22 Items: A Socket Wrench Screwdriver Attachment Set (SCREWDRIVER ATTACHMENT SET,SOCKET WRENCH) is a set of screwdriver attachment, socket wrench of different sizes. Items consist of a female square drive on one end to attach to a handle, socket wrench and various screwdriver tip configurations on the opposite end. Excludes SCREWDRIVER ATTACHMENT,SOCKET WRENCH
What is an Oil Filter Wrench? 44 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 430 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Communications Equipment Spring Adjuster? 13 Items: A Communications Equipment Spring Adjuster (ADJUSTER,SPRING,COMMUNICATIONS EQUIPMENT) is a single or double end tool, equipped with slot(s) of various dimensions or with cylindrical rod(s), used for adjusting the springs or spring tensioned parts of electronic equipment.
What is a Rotating Members Aligning Tool? 32 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
What is a Final Drive Assembly Alignment Pin? 41 Items: A Final Drive Assembly Alignment Pin (ALIGNMENT PIN,FINAL DRIVE ASSEMBLY) is a special designed pin used in the assembling of the final drive.
Arm,Handling Tool 77 Items
What is a Splicing Sleeve Compressing Tool? 23 Items: A Splicing Sleeve Compressing Tool (COMPRESSING TOOL,SPLICING SLEEVE) is a hand tool having hinged leverage handles similar to a CUTTER, BOLT or pliers, designed to compress a splicing sleeve when joining the ends of two conductors, or when forming an eye splice in the end of a wire rope. Excludes CRIMPING TOOL, TERMINAL, HAND.
What is a Hand Screw Jack Extension? 14 Items: A Hand Screw Jack Extension (EXTENSION,HAND SCREW JACK) is a length of externally threaded rigid shafting which is the adjustable section of a JACK, SCREW, HAND.
What is a Mechanical Puller Gear Adapter? 21 Items: A Mechanical Puller Gear Adapter (GEAR ADAPTER,PULLER,MECHANICAL) is an adapter that adapts a PULLER,MECHANICAL, to pull a certain gear.
Handle,Hydraulic Jack 18 Items
What is a Female Electrical Contact Resizing Tool? 11 Items: A Female Electrical Contact Resizing Tool (RESIZING TOOL,FEMALE ELECTRICAL CONTACT) is a tool designed to shape to a specific size, female contacts such as those used on electrical connectors, tube sockets, crystal sockets, and pin jacks.
What is a Screwdriver And Socket Wrench Combination? 13 Items: A Screwdriver And Socket Wrench Combination is a hand-tool formed into an integral unit with a socket wrench at one end and a screwdriver bit at the other end. See also SCREWDRIVER AND WRENCH ASSEMBLY.
What is a Hand Hose Fitting Swaging Tool Kit? 11 Items: A Hand Hose Fitting Swaging Tool Kit (SWAGING TOOL KIT,HOSE FITTING,HAND) is a device, hydraulically actuated by hand or power operated pump, consisting of face plate, adapter plate, finger cages, fingers, ram, bushing, and expanding mandrels combined on a single base in various functional arrangements. It is used for swaging the outside diameter of hose assembly fittings, expanding the inside diameter of hose assemblies, and securing the fabrication of hose assemblies. Included are a hand or power operated pump, lubricant, cases, and trays.
What is a Catch Lever Tool? 12 Items: A Catch Lever Tool (LEVER TOOL,CATCH) is a specially designed hand tool which engages the opening and closing lever of a CATCH (as modified) for ease of operation. It is constructed of thin rigid material, usually flat, and one end has an engaging tongue.
What is a Manual Impact Wrench? 11 Items: A Manual Impact Wrench (WRENCH,IMPACT,MANUAL) is a manually operated handheld tool consisting of spring-loaded handle and a power-impact head which delivers a torsional impact from either continuous movement of the handle in one direction, or by a reciprocating action. It is used in tightening and loosening fasteners, such as bolts, nuts, and the like. The item may include sockets, extensions and offset fittings, nut runners, and the like.
What is a Drift? 63 Items: A Drift is an item consisting of a tubular body fitted with replaceable tips. It is designed to insert or remove mechanical components where space is restricted.
What is a Nutdriver? 46 Items: A Nutdriver is a non-powered hand tool with a screwdriver style handle, shaft and formed female hex or square socket at driving end.
What is a Locking Device Removal Tool? 12 Items: A Locking Device Removal Tool (REMOVAL TOOL,LOCKING DEVICE) is a hand tool designed to facilitate the removal of a WASHER, KEY and a LOCKING PLATE, NUT AND BOLT.
What is a Hydraulic Fitting Crimping Tool Head? 26 Items: A Hydraulic Fitting Crimping Tool Head (HEAD,CRIMPING TOOL,HYDRAULIC FITTING) is a component of a crimping tool used to compress fittings on fluid tubes. It consists of a U-shape item, in which, are mounted different sizes of DIE, CRIMPING TOOL for tubes of various diameters.
What is a Torque Screwdriver? 11 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.
What is a Special Purpose Combination Wrench? 13 Items: A Special Purpose Combination Wrench (WRENCH,COMBINATION,SPECIAL PURPOSE) is a tool having a combination of ends and facets. The ends may have open end, box or spanner characteristics. The sides may have features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s). Designed to fit specific items, not sized as standard or metric.
What is a Screwdriver Bit Holder? 56 Items: A Screwdriver Bit Holder (HOLDER,SCREWDRIVER BIT) is an attachment with a socket end for accepting male hexagon shank insert bits and a drive end for adapting to a portable power or hand tool.
What is a Telescoping Pole? 16 Items: A Telescoping Pole (POLE,TELESCOPING) is an item which is designed to be extended or compressed by the sliding of overlapping sections. This item may or may not be able to accommodate an extension.

Stock Items From Supply Class 5120 Page 42 of 110

5120-14-501-3470

5120-14-317-2261
Reglage Jeu Emb Axe

143172261
0S21541: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-228-5196

5120-14-521-6831
Ou Buse Melangeuse

145216831
9501PPM103: RNCC: 3 | RNVC: 2

4 Sep 2000

5120-14-419-2633
Appareil Monte-Join

144192633
530714: RNCC: 3 | RNVC: 2

16 Oct 1987

5120-14-527-8831
Tube Packing Ring Installing Tool

145278831
8816732000: RNCC: 3 | RNVC: 2

28 Nov 2001

5120-14-368-5811
Pince A Segment

143685811
14-18-978-0Z: RNCC: 3 | RNVC: 2
14189780Z: RNCC: 5 | RNVC: 2

20 Feb 1981

5120-14-260-2935
Poignee Pour Fraise

142602935
S16-0122-1600: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-444-3460
Socket Wrench Socket

144443460
GS86L-08: RNCC: 3 | RNVC: 2

9 Jan 1991

5120-14-448-4591
Open End Wrench

144484591
NO PRIMARY REF14-448-4591: RNCC: 3 | RNVC: 2
91355343: RNCC: 5 | RNVC: 2
0102443: RNCC: 5 | RNVC: 2
44A 22X24: RNCC: 5 | RNVC: 9

26 Jun 1991

5120-14-438-5076
Face Spanner Wrench Socket

144385076
NO PRIMARY REF14-438-5076: RNCC: 3 | RNVC: 2
RT6197B: RNCC: 5 | RNVC: 9
85-694-1089: RNCC: 6 | RNVC: 9

21 Mar 1990

5120-14-359-0282
Electrical Contact Remover

143590282
SD015-00-00-005: RNCC: 3 | RNVC: 2
SDEM4-0150: RNCC: 5 | RNVC: 2
SDEM5-0150: RNCC: 5 | RNVC: 2
SD-015-00-00-004: RNCC: 5 | RNVC: 2

7 Sep 1979

5120-14-513-4113
Socket Head Screw Key

145134113
NO PRIMARY REF14-513-4113: RNCC: 3 | RNVC: 2
NNP 5120860464852: RNCC: 5 | RNVC: 9

17 Mar 1999

5120-14-448-8389
Electrical Contact Inserter And Remover

144488389
OUT-379: RNCC: 3 | RNVC: 2
MUP5821: RNCC: 5 | RNVC: 2

17 Jul 1991

5120-14-303-6421
Torque Wrench Adapter

143036421
D0-7: RNCC: 3 | RNVC: 2
D07: RNCC: 3 | RNVC: 2
3272670302044: RNCC: 5 | RNVC: 2
D07: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-415-2839
Face Spanner Wrench Socket

144152839
3210-97-31-358-1: RNCC: 3 | RNVC: 2
85-660-4850: RNCC: 6 | RNVC: 9

28 Apr 1987

5120-14-349-3840
Socket Wrench Socket

143493840
9970-115-602: RNCC: 3 | RNVC: 2

22 May 1978

5120-14-308-3890

5120-14-319-4912

5120-14-032-3499
Jeu Extenseur

140323499
33388: RNCC: 3 | RNVC: 2

17 Feb 1983

5120-14-343-8329

5120-14-512-4343
Tendeur

145124343
5000269804: RNCC: 3 | RNVC: 2

16 Feb 1999

5120-14-349-0299

5120-14-573-6809
Hand Beading Tool

145736809
AT1PA2: RNCC: 3 | RNVC: 2

31 Oct 2012

5120-14-417-1285
Lame Speciale Radia

144171285
547947: RNCC: 3 | RNVC: 2

1 Jul 1987

5120-14-357-9972
Equipe Embout

143579972
MKM0423500: RNCC: 3 | RNVC: 2
MKM0423500: RNCC: 5 | RNVC: 2

20 Jul 1979

5120-14-245-1755
Spatule Pour Montag

142451755
G1-15-606: RNCC: 3 | RNVC: 2
G1-15-606: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-338-6262
Spanner Wrench

143386262
NO PRIMARY REF14-338-6262: RNCC: 3 | RNVC: 2
286801: RNCC: 5 | RNVC: 2
131: RNCC: 5 | RNVC: 9

17 Dec 1976

5120-14-491-4137
Cle

144914137
105N14X16: RNCC: 3 | RNVC: 2
F300 0T 002 7769: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-371-9701
Adapt Cle Plateau

143719701
8812301001: RNCC: 3 | RNVC: 2

5 Aug 1981

5120-14-415-9036
Cle Tige

144159036
TH20S103: RNCC: 3 | RNVC: 2

26 May 1987

5120-14-444-8297
Cle De Serrage

144448297
0478-203134: RNCC: 3 | RNVC: 2

23 Jan 1991

5120-14-314-4889
Montage Contre Perc

143144889
M2D61060: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-565-9368
Torque Wrench Adapter

145659368
62018399AA: RNCC: 3 | RNVC: 2

5 Oct 2010

5120-14-220-8558
Cle Col De Cygne Sp

142208558
PR46668: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-262-8236

5120-14-300-9509
Vis De Verin

143009509
341A91-0056-25: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-375-8052
Vise Jaw Caps

143758052
300A98944: RNCC: 3 | RNVC: 2
91372596: RNCC: 5 | RNVC: 2
300A98944: RNCC: 5 | RNVC: 2
300A98944: RNCC: 5 | RNVC: 9
300A98944: RNCC: 5 | RNVC: 9

30 Mar 1982

5120-14-511-5048
Co Outil De Montage

5120-14-509-6275

5120-14-462-9861
Avant Extracteur

144629861
T700A5799005000: RNCC: 3 | RNVC: 2

12 May 1993

5120-14-573-3404
Screwdriver Bit Holder

145733404
18.10: RNCC: 3 | RNVC: 2

5 Oct 2012

5120-14-392-0873

5120-14-377-1226

5120-14-303-7080

5120-14-398-2001
Enceinte Dessais

143982001
853-700-097-0: RNCC: 3 | RNVC: 2

31 Jan 1985

5120-14-438-5053
Spring Inserter And Remover

144385053
J47944: RNCC: 3 | RNVC: 2
85-694-0752: RNCC: 6 | RNVC: 9

21 Mar 1990

5120-14-406-6350
Nylon Protecteur

144066350
851-200-142-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-574-6176
Hand Chain Breaker-Riveter

145746176
CH-04000: RNCC: 3 | RNVC: 2

6 Feb 2013

5120-14-391-8658
Essai Support

143918658
MKG374-21: RNCC: 3 | RNVC: 2

21 Mar 1984

5120-14-321-8078
Mechanical Puller Attachment

143218078
3160S95-33-129: RNCC: 3 | RNVC: 2
85-689-0958: RNCC: 6 | RNVC: 9

1 Jan 1975

5120-14-295-6388
Spanner Wrench

142956388
9970-111-145: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-274-8349
Hand Abrasive Wheel Dresser

142748349
5488-10: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-043-1675
Cle Pyromeca

140431675
0766393M00: RNCC: 3 | RNVC: 2
069U20-766393M: RNCC: 5 | RNVC: 2

10 Apr 1984

5120-14-365-0179
Socket Wrench Socket

143650179
S.1/2H: RNCC: 3 | RNVC: 2
0712 131 112: RNCC: 5 | RNVC: 2
3148510548401: RNCC: 5 | RNVC: 2
S1-2H: RNCC: 5 | RNVC: 2
0715 13 34: RNCC: 5 | RNVC: 2
0054840: RNCC: 5 | RNVC: 9

2 Sep 1980

5120-14-232-7886
Socket Wrench Screwdriver Attachment

142327886
RT.7/32: RNCC: 3 | RNVC: 2
RT7-32: RNCC: 5 | RNVC: 2
3148515143601: RNCC: 5 | RNVC: 2
0514360: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-484-6497
Socket Wrench Socket

144846497
NO PRIMARY REF14-484-6497: RNCC: 3 | RNVC: 2
3148510532851: RNCC: 5 | RNVC: 2
RB.5,5: RNCC: 5 | RNVC: 2
0053285: RNCC: 5 | RNVC: 9

28 Nov 1996

5120-14-360-6462
Wrench Kit

143606462
881-0-255-000: RNCC: 3 | RNVC: 2
8810255000: RNCC: 5 | RNVC: 2

19 Dec 1979

5120-14-516-8060
Poussoir

145168060
5001008869: RNCC: 3 | RNVC: 2

18 Oct 1999

5120-14-562-3879
Flat Tip And Cross Tip Screwdriver Set

145623879
ASP.J6: RNCC: 3 | RNVC: 2
786832: RNCC: 5 | RNVC: 2
3148517868328: RNCC: 5 | RNVC: 2

21 Oct 2009

5120-14-214-3091

5120-14-375-6513

5120-14-234-4273

5120-14-529-2698
Adjustable Wrench

145292698
113.4C: RNCC: 3 | RNVC: 9
3148511326619: RNCC: 5 | RNVC: 9

20 Mar 2002

5120-14-463-0383
Seal Inserter And Remover

144630383
45057912: RNCC: 3 | RNVC: 2
45057912: RNCC: 5 | RNVC: 9

12 May 1993

5120-14-565-9422
Hand Hammer

145659422
0136600301: RNCC: 3 | RNVC: 2
A251400100007: RNCC: 5 | RNVC: 2

6 Oct 2010

5120-14-274-8332

5120-14-344-7851
Outil De Recalibrag

143447851
8810588000: RNCC: 3 | RNVC: 2
85-689-2503: RNCC: 6 | RNVC: 9

9 Sep 1977

5120-14-360-7703
Roulements Montage

143607703
MAS4723: RNCC: 3 | RNVC: 2
M532-01-11000-2A4: RNCC: 5 | RNVC: 2

19 Dec 1979

5120-14-249-3294
Levier Dextracteur

142493294
12202126: RNCC: 3 | RNVC: 2
12202126: RNCC: 3 | RNVC: 9

1 Jan 1968

5120-14-561-7472
Screwdriver Bit

145617472
EP.661: RNCC: 3 | RNVC: 2
0024106: RNCC: 5 | RNVC: 2
3148510241067: RNCC: 5 | RNVC: 2

1 Sep 2009

5120-14-467-1941
Support Regulation

144671941
430163: RNCC: 3 | RNVC: 2

21 Dec 1993

5120-14-389-9778
Outil D'installatio

143899778
065U20-642813F: RNCC: 3 | RNVC: 2

26 Jan 1984

5120-14-265-0895
Obus Demmanchement

142650895
330A93-7700-00: RNCC: 3 | RNVC: 2
330A93-7700-0000: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-353-2448
Open End Wrench

143532448
NO PRIMARY REF14-353-2448: RNCC: 3 | RNVC: 2
19304344: RNCC: 5 | RNVC: 9

8 Dec 1978

5120-14-369-5131
Tas De Freinage

143695131
9970-121-304: RNCC: 3 | RNVC: 2

17 Apr 1981

5120-14-246-5818

5120-14-490-8699
Rabot

144908699
4061 443 111 040: RNCC: 3 | RNVC: 2
F300 0T 000 4938: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-360-3423

5120-14-247-9642
Pince

142479642
SAM206: RNCC: 3 | RNVC: 2
RT20385: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-387-8651
Mont Cuv Roul Outil

143878651
OU50390: RNCC: 3 | RNVC: 2
0U50390: RNCC: 5 | RNVC: 2

12 Oct 1983

5120-14-430-3464
Diaphrag Extracteur

144303464
RT17822: RNCC: 3 | RNVC: 2

15 Mar 1989

5120-14-490-4533
Detent Handling Tool

144904533
0621141E115040: RNCC: 3 | RNVC: 2
0621141E115040: RNCC: 3 | RNVC: 9
SYQ0459: RNCC: 5 | RNVC: 2
62-040-1141/E115 CARRE DE 17: RNCC: 5 | RNVC: 9

30 Sep 1997

5120-14-490-8741
Cle

144908741
4065 030 000 785: RNCC: 3 | RNVC: 2
F300 0T 000 4991: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-248-7503

5120-14-321-1822

5120-14-459-3274
Solid Center Punch

144593274
OS22712: RNCC: 3 | RNVC: 2
OS22712: RNCC: 5 | RNVC: 9

25 Nov 1992

5120-14-567-3817
Open End Wrench

145673817
62024212AA: RNCC: 3 | RNVC: 2

9 Mar 2011

5120-14-031-5366

5120-14-401-6813

5120-14-463-9770
Open End Wrench

144639770
854-500-320-0: RNCC: 3 | RNVC: 2

7 Jul 1993

5120-14-565-8211
Spanner Wrench

145658211
853-290-193-0: RNCC: 3 | RNVC: 2

24 Sep 2010

5120-14-276-3286
Tige Montage Chaine

142763286
D1557-60006: RNCC: 3 | RNVC: 2
D1557-60006: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-369-1882
Extracteur Axe Tige

143691882
365A93-4146-27: RNCC: 3 | RNVC: 2

17 Apr 1981

5120-14-549-4752
Open End Wrench

145494752
269E742-01: RNCC: 3 | RNVC: 2

7 Apr 2006

5120-14-257-1182
Socket Wrench Crowfoot Attachment

142571182
300250: RNCC: 3 | RNVC: 2
W0F106A: RNCC: 5 | RNVC: 2
100-6A: RNCC: 5 | RNVC: 2
106A: RNCC: 5 | RNVC: 2

1 Jan 1969

5120-14-571-6908
Spatula

145716908
RD-MJ-0020: RNCC: 3 | RNVC: 2

24 Apr 2012

5120-14-473-1187
Electrical Contact Inserter

144731187
006-0902-16: RNCC: 3 | RNVC: 2
0113357D00: RNCC: 5 | RNVC: 2

7 Dec 1994

5120-14-208-9852
Open End Wrench

142089852
70-30X32: RNCC: 3 | RNVC: 2
3272670226104: RNCC: 5 | RNVC: 2

1 Jan 1964

5120-14-384-7358
Electrical Card Extractor

143847358
NO PRIMARY REF14-384-7358: RNCC: 3 | RNVC: 2
16931877: RNCC: 5 | RNVC: 9

2 Jun 1983

5120-14-399-5138
Spanner Wrench

143995138
OUT-17MS19: RNCC: 3 | RNVC: 2
0UT17MS19: RNCC: 5 | RNVC: 2

6 Mar 1985

5120-14-449-8739
Cle Pour Pince

144498739
60708: RNCC: 3 | RNVC: 2
91705844: RNCC: 5 | RNVC: 2

11 Sep 1991

5120-14-278-2790

5120-14-362-7538

5120-14-570-7243
Socket Wrench

145707243
94-SD10: RNCC: 3 | RNVC: 2

19 Jan 2012

5120-14-575-1695
Torque Wrench

145751695
92593490000: RNCC: 3 | RNVC: 1

18 Mar 2013

5120-14-228-5199

5120-14-301-9193

5120-14-393-8815
Monte-Joint Outil

143938815
NO PRIMARY REF14-393-8815: RNCC: 3 | RNVC: 2
OU136758: RNCC: 5 | RNVC: 9

23 Jun 1984

5120-14-217-2708
Cle Pour Raccord

142172708
M17-140: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-311-7473
Spanner Wrench

143117473
6800-1074: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-483-9398
Moulinet

144839398
0U143758: RNCC: 3 | RNVC: 2
0U143758: RNCC: 5 | RNVC: 2
0U143758: RNCC: 5 | RNVC: 9

10 Oct 1996

5120-14-373-4546
Sabot De Levage

143734546
DLP751680: RNCC: 3 | RNVC: 2

21 Oct 1981

5120-14-253-3864
Poignee Pour Cle

142533864
044BBC14BPL3PC21: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-350-7185

5120-14-299-2930

5120-14-331-5443

5120-14-564-9270
Mechanical Puller

145649270
885559: RNCC: 3 | RNVC: 2

17 Jun 2010

5120-14-386-9729
Cle Bouchon Culasse

143869729
26145045800: RNCC: 3 | RNVC: 2
261450458: RNCC: 5 | RNVC: 9

24 Aug 1983

5120-14-207-5307

5120-14-328-1514

5120-14-245-7678

5120-14-335-4514
Screwdriver Bit

143354514
0033820: RNCC: 3 | RNVC: 2
NET.8: RNCC: 5 | RNVC: 2
NET8: RNCC: 5 | RNVC: 2

30 Jun 1976

5120-14-317-0711
Open End Wrench

143170711
0-64184-7: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-320-7224
Bague De Retreint

143207224
S16-0606-0001: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-222-7158
Open End Wrench

142227158
524-30X32: RNCC: 3 | RNVC: 9
33-30X32: RNCC: 5 | RNVC: 2
DEM524-30X32: RNCC: 5 | RNVC: 9

1 Jan 1966

5120-14-204-3006
Cle Speciale

142043006
M3-045: RNCC: 3 | RNVC: 2

1 Jan 1963

5120-14-385-0670
Spanner Wrench

143850670
600403374: RNCC: 3 | RNVC: 2
SY2104C: RNCC: 5 | RNVC: 2
600403374: RNCC: 5 | RNVC: 9
SY2104C: RNCC: 5 | RNVC: 9

2 Jun 1983

5120-14-548-1162
Open End Wrench

145481162
45.24: RNCC: 3 | RNVC: 2

12 Dec 2005

5120-14-313-8076
Electrical Card Extractor

143138076
A9372: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-375-8013
Bearing And Bushing Inserter

143758013
300A99297: RNCC: 3 | RNVC: 2
91369776: RNCC: 5 | RNVC: 2
300A99297: RNCC: 5 | RNVC: 2
300A99297: RNCC: 5 | RNVC: 9
300A99297: RNCC: 5 | RNVC: 9

30 Mar 1982

5120-14-283-4940
Cle Speciale

142834940
406989: RNCC: 3 | RNVC: 2
406989: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-429-3277
Open End Wrench

144293277
080202062400: RNCC: 3 | RNVC: 2

17 Jan 1989

5120-14-274-8338

5120-14-264-0599
Socket Head Screw Key

142640599
801W1-16: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-364-4745
Flat Tip Screwdriver

143644745
NO PRIMARY REF14-364-4745: RNCC: 3 | RNVC: 2
ARN2-5X100: RNCC: 5 | RNVC: 2

2 Sep 1980

5120-14-347-2500
Verin Pneumatique

143472500
P32N50: RNCC: 3 | RNVC: 2

19 Jan 1978

5120-14-324-6710
Machoire De Pince

143246710
R282242: RNCC: 3 | RNVC: 2
282242: RNCC: 5 | RNVC: 2
R282242: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-324-6913

5120-14-247-2035

5120-14-422-9378
Matrice Sertir Tube

144229378
D12204-04: RNCC: 3 | RNVC: 2

23 Aug 2000

5120-14-332-3822
Face Spanner Wrench Socket

143323822
M31-013: RNCC: 3 | RNVC: 2
M31-013: RNCC: 5 | RNVC: 9

2 Jul 1975

5120-14-570-5422
Brake Shoe Adjusting Tool

145705422
A557605: RNCC: 3 | RNVC: 2

3 Jan 2012

5120-14-365-9050
Open End Wrench

143659050
422960: RNCC: 3 | RNVC: 2

4 Nov 1980

5120-14-425-9521
Appareil Pour Emman

144259521
500351FTH20M2: RNCC: 3 | RNVC: 2

28 Jul 1988

5120-14-578-1249
Face Spanner Wrench Socket

145781249
8818805000: RNCC: 3 | RNVC: 2
TM4301G001: RNCC: 5 | RNVC: 2

4 Nov 2013

5120-14-440-0564
Spanner Wrench

144400564
115-35: RNCC: 3 | RNVC: 2
85-694-3807: RNCC: 6 | RNVC: 9

10 Jul 1990

5120-14-232-1683

5120-14-452-3180
Preformed Packing Inserter And Remover

144523180
502501PTH20R2: RNCC: 3 | RNVC: 2

8 Jan 1992

5120-14-528-6742
Socket Head Screw Key

145286742
82H.15: RNCC: 3 | RNVC: 2
SYQ0754: RNCC: 5 | RNVC: 2

5 Feb 2002

5120-14-248-1073

5120-14-362-4010
Outil Soude Chapeau

143624010
095174: RNCC: 3 | RNVC: 2
095174A: RNCC: 5 | RNVC: 2

19 Mar 1980

5120-14-352-3182
Mont Palie Douilles

143523182
MHD288-23: RNCC: 3 | RNVC: 2
MHD288-23: RNCC: 5 | RNVC: 2

16 Oct 1978

5120-14-220-0244
Flat Tip Screwdriver

142200244
NO PRIMARY REF14-220-0244: RNCC: 3 | RNVC: 2
21605H: RNCC: 5 | RNVC: 9
21605H: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-249-3937
Guide Axe

142493937
3210-95-38-001: RNCC: 3 | RNVC: 2
08-320: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-371-4134
Spanner Wrench

143714134
6254-57042: RNCC: 3 | RNVC: 2

5 Aug 1981

5120-14-379-0708
Bearing And Bushing Inserter

143790708
365A93-3212-20: RNCC: 3 | RNVC: 2

6 Sep 1982

5120-14-377-3001
Socket Wrench Socket

143773001
MH030-23-00: RNCC: 3 | RNVC: 2
MH030-23-00: RNCC: 5 | RNVC: 2

17 May 1982

5120-14-237-9397
Blacksmith's Top Fuller

142379397
M0B11-25EC: RNCC: 3 | RNVC: 2
3834-25EMMANCHE: RNCC: 3 | RNVC: 9
664-25: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-570-2237
Face Spanner Wrench Socket

145702237
95406: RNCC: 3 | RNVC: 2

30 Nov 2011

5120-14-314-1014
Tete Caoutchouc Bom

143141014
WA.1140: RNCC: 3 | RNVC: 2
3148510792804: RNCC: 5 | RNVC: 2
WA1140: RNCC: 5 | RNVC: 2
0079280: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-421-0338
Queue D'arronde Fem

144210338
800537908: RNCC: 3 | RNVC: 2

6 Jan 1988

5120-14-532-4370
Electrical Contact Inserter And Remover

145324370
282885: RNCC: 3 | RNVC: 2
282880: RNCC: 5 | RNVC: 2

30 Oct 2002

5120-14-532-4413
Flat Tip Screwdriver

145324413
40188713: RNCC: 3 | RNVC: 2

30 Oct 2002

5120-14-236-4622
Spanner Wrench

142364622
922AREP8: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-382-7625
Electrical Contact Remover

143827625
809817: RNCC: 3 | RNVC: 2

17 Feb 1983

5120-14-454-3159
Etau Support

144543159
MFG310-21: RNCC: 3 | RNVC: 2

26 Mar 1992

5120-14-371-5881
Montage Joint Outil

143715881
MGF097-22: RNCC: 3 | RNVC: 2
MGF097-22: RNCC: 5 | RNVC: 2

5 Aug 1981

5120-14-432-3871
Outillage Mandrin

144323871
547919: RNCC: 3 | RNVC: 2
00547919: RNCC: 5 | RNVC: 2

7 Jun 1989

5120-14-209-5415
Appui De Cric Outil

142095415
A22914: RNCC: 3 | RNVC: 2

1 Jan 1964

5120-14-248-7493

5120-14-455-1883
Bille Pour Durete

144551883
77701100S: RNCC: 3 | RNVC: 2

7 May 1992

5120-14-323-2048
Pose Oeille Matrice

143232048
2031-4JEUDEP0SE: RNCC: 3 | RNVC: 9

1 Jan 1975

5120-14-425-9247
Socket Wrench Spanner Attachment

144259247
600101: RNCC: 3 | RNVC: 2

28 Jul 1988

5120-14-275-8163
Wrench Kit

142758163
8810048000: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-235-9707
Spanner Wrench

142359707
E74323B23AGW: RNCC: 2 | RNVC: 2

1 Jan 1967

5120-14-490-1479
Face Spanner Wrench Socket

144901479
IT20CEPCDC: RNCC: 3 | RNVC: 2

17 Sep 1997

5120-14-485-7537
Spanner Wrench

144857537
43930: RNCC: 3 | RNVC: 2
711126: RNCC: 3 | RNVC: 2
SYB2019: RNCC: 5 | RNVC: 2
43930: RNCC: 5 | RNVC: 9

11 Feb 1997

5120-14-325-3679
Socket Wrench Socket

143253679
901MA0063REP2: RNCC: 3 | RNVC: 2
901MA063REP2: RNCC: 5 | RNVC: 2

2 Jul 1975

5120-14-271-5231
Bloc De Pre-Sertiss

142715231
RMPS5F16X1M: RNCC: 3 | RNVC: 2
RMPS4F14-16M: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-451-2674
Sertissag Outillage

144512674
MMG047-03: RNCC: 3 | RNVC: 2
MMG047-03: RNCC: 5 | RNVC: 2

6 Nov 1991

5120-14-396-1082
Spanner Wrench

143961082
125.120: RNCC: 3 | RNVC: 2
0134662: RNCC: 5 | RNVC: 2
125-120: RNCC: 5 | RNVC: 2
BLC23046: RNCC: 5 | RNVC: 2

27 Nov 1984

5120-14-428-8837
Bearing And Bushing Inserter

144288837
350A93-3221-00: RNCC: 3 | RNVC: 2

22 Dec 1988

5120-14-338-2620
Electrical Contact Remover

143382620
OUT-DB-CAL12F: RNCC: 3 | RNVC: 2

6 Nov 1976

5120-14-486-5684
Outillage

144865684
RT21785: RNCC: 3 | RNVC: 2

25 Mar 1997

5120-14-292-7389

5120-14-559-0189
Socket Wrench Screwdriver Attachment

145590189
SV.16B: RNCC: 3 | RNVC: 2
438607: RNCC: 5 | RNVC: 2
0673281: RNCC: 5 | RNVC: 2
3148516732811: RNCC: 5 | RNVC: 2

27 Nov 2008

5120-14-287-4968

5120-14-347-0219
Cone Mise En Forme

143470219
D47704: RNCC: 3 | RNVC: 2

19 Jan 1978

5120-14-277-0286
Cle Plaque De Base

142770286
16019: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-250-1264

5120-14-226-0550

5120-14-288-1835

5120-14-200-8157
Socket Head Screw Key

142008157
E74331-19NL: RNCC: 2 | RNVC: 2
0123190: RNCC: 3 | RNVC: 2
62-19: RNCC: 3 | RNVC: 2
190-19: RNCC: 3 | RNVC: 9
0715 31 31: RNCC: 5 | RNVC: 2
0715 31 50: RNCC: 5 | RNVC: 2
82-19: RNCC: 5 | RNVC: 2
82.19: RNCC: 5 | RNVC: 2
3272670244085: RNCC: 5 | RNVC: 2
DEM190-19: RNCC: 5 | RNVC: 9

1 Jan 1962

5120-14-430-2612
Fourrure De Montage

144302612
905478-1AREP05: RNCC: 3 | RNVC: 2
900280A: RNCC: 3 | RNVC: 2

15 Mar 1989

5120-14-255-9682
Cambreur Fente

142559682
NO PRIMARY REF14-255-9682: RNCC: 3 | RNVC: 2
1307-8: RNCC: 5 | RNVC: 9

1 Jan 1969

5120-14-278-7840
Open End Wrench

142787840
10-5-5X7NC: RNCC: 3 | RNVC: 2
10-5-5X7CM: RNCC: 5 | RNVC: 2
91313172: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-374-2934
Screwdriver Bit

143742934
150-9: RNCC: 3 | RNVC: 2
54-3: RNCC: 5 | RNVC: 9
85-691-6890: RNCC: 6 | RNVC: 9

8 Dec 1981

5120-14-273-8183

5120-14-490-8869
Boutero

144908869
4067 050 000 338: RNCC: 3 | RNVC: 2
F300 0T 000 5141: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-288-6986
Bague De Position

142886986
D1553-4829: RNCC: 3 | RNVC: 2
D1553-4829: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-404-5053
Control Concent Out

144045053
DLC423100: RNCC: 3 | RNVC: 2

18 Nov 1985

5120-14-200-9837

5120-14-430-3463
Filtre Extracteur

144303463
RT17821: RNCC: 3 | RNVC: 2

15 Mar 1989

5120-14-524-4400
Mechanical Puller Attachment

145244400
TC3025P004: RNCC: 3 | RNVC: 2

20 Mar 2001

5120-14-513-2943
Socket Head Screw Key

145132943
NO PRIMARY REF14-513-2943: RNCC: 3 | RNVC: 2
NNP 5120868689095: RNCC: 5 | RNVC: 9

10 Mar 1999

5120-14-514-1203
Open End Wrench

145141203
ENFD29451-21X23: RNCC: 3 | RNVC: 2

27 Apr 1999

5120-14-578-1420
Mechanical Puller

145781420
S622V3002102: RNCC: 3 | RNVC: 2

5 Nov 2013

5120-14-229-2673
Dispositif Darret A

142292673
VTR250-1042: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-368-5064
Fourche De Reglage

143685064
239600-78: RNCC: 3 | RNVC: 2
TF10A32507: RNCC: 5 | RNVC: 2
85-689-7919: RNCC: 6 | RNVC: 9

20 Feb 1981

5120-14-392-0834
Socket Wrench Crowfoot Attachment

143920834
853-115-013-0: RNCC: 3 | RNVC: 2

21 Mar 1984

5120-14-378-5546
Bta Outil Controle

143785546
6804J33-4009-20: RNCC: 3 | RNVC: 2
6804360A33-4009-20: RNCC: 5 | RNVC: 2

11 Aug 1982

5120-14-285-5952

5120-14-323-4475
Ecrou De Desserrage

143234475
0S20085: RNCC: 3 | RNVC: 2
0MDS20085: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-395-7775

5120-14-246-9087

5120-14-508-3747
Socket Wrench Screwdriver Attachment

145083747
SHP.10L: RNCC: 3 | RNVC: 2
0715 137 102: RNCC: 5 | RNVC: 2
0058996: RNCC: 5 | RNVC: 9

9 Sep 1998

5120-14-468-9222
Socket Head Screw Key Set

144689222
83.JP9: RNCC: 3 | RNVC: 2
83JP9: RNCC: 5 | RNVC: 2
0123780: RNCC: 5 | RNVC: 2

29 Mar 1994

5120-14-514-2108
Screw Thread Insert Inserter

145142108
01500277400: RNCC: 3 | RNVC: 2

28 Apr 1999

5120-14-547-0345
Spanner Wrench

145470345
902083: RNCC: 3 | RNVC: 2
91831063: RNCC: 5 | RNVC: 2

16 Sep 2005

5120-14-340-8972
Socket Wrench Crowfoot Attachment

143408972
9970-115-584: RNCC: 3 | RNVC: 2

14 Feb 1977

5120-14-443-6316
Montage Alesage

144436316
NO PRIMARY REF14-443-6316: RNCC: 3 | RNVC: 2
OU132478: RNCC: 5 | RNVC: 9

30 Nov 1990

5120-14-417-4895
Sertissage Outil

144174895
DB13109: RNCC: 3 | RNVC: 2
DB13109: RNCC: 5 | RNVC: 2

8 Jul 1987

5120-14-340-9406

5120-14-220-9246

5120-14-394-5336
Socket Head Screw Key

143945336
193-27843J: RNCC: 3 | RNVC: 2

28 Aug 1984

5120-14-407-2055
Spanner Wrench

144072055
101662: RNCC: 3 | RNVC: 2

12 Feb 1986

5120-14-469-2716
Socket Wrench Socket

144692716
79803148: RNCC: 3 | RNVC: 2

18 Apr 1994

5120-14-472-3687
Body And Fender Repair Pick

144723687
909A: RNCC: 3 | RNVC: 2
2695 470 21: RNCC: 5 | RNVC: 2
3148512132400: RNCC: 5 | RNVC: 2
909: RNCC: 5 | RNVC: 2
0213240: RNCC: 5 | RNVC: 9

19 Oct 1994

5120-14-239-6380

5120-14-489-0300
Flat Tip Screwdriver

144890300
AZFH.10X200: RNCC: 3 | RNVC: 2
3148510134406: RNCC: 5 | RNVC: 2
AZFH.10X200: RNCC: 5 | RNVC: 2
0613 232 10: RNCC: 5 | RNVC: 2
0613 240 10: RNCC: 5 | RNVC: 2
0013440: RNCC: 5 | RNVC: 9

18 Jun 1997

5120-14-349-9622
Screw Push-Pull Jack

143499622
158289: RNCC: 3 | RNVC: 2

14 Jun 1978

5120-14-249-0627
Socket Wrench Screwdriver Attachment

142490627
JP1: RNCC: 3 | RNVC: 2
3148515058004: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-551-0189
Spanner Wrench

145510189
F46830: RNCC: 3 | RNVC: 2

21 Aug 2006

5120-14-369-7604
Spanner Wrench

143697604
F46421: RNCC: 3 | RNVC: 2

17 Apr 1981

5120-14-304-4464
Open End Wrench

143044464
09-15: RNCC: 3 | RNVC: 2
09-15: RNCC: 5 | RNVC: 2

1 Jan 1974

5120-14-445-5365
Spanner Wrench

144455365
16349503: RNCC: 3 | RNVC: 2

14 Feb 1991

5120-14-338-4729
Faux Fond

143384729
C46364: RNCC: 3 | RNVC: 2

6 Nov 1976

5120-14-373-5535

5120-14-241-6291
Prolongateur Pour C

142416291
1050-95-504-00: RNCC: 3 | RNVC: 2
95-504-00: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-316-9168
Mechanical Puller Adapter

143169168
U.51B5-10: RNCC: 3 | RNVC: 2
0762000: RNCC: 5 | RNVC: 2
EMB0UTU51-37: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-249-3718
Cle A Ergots Specia

142493718
NO PRIMARY REF14-249-3718: RNCC: 3 | RNVC: 2
MA2363: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-306-3439
Position Transmissi

143063439
330A93-3413-00: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-204-2997
Extracteur Special

142042997
M3-003: RNCC: 3 | RNVC: 2
M3003: RNCC: 5 | RNVC: 2
M3-003: RNCC: 5 | RNVC: 9

1 Jan 1963

5120-14-414-6671
Outil De Reparation

144146671
34874-99: RNCC: 3 | RNVC: 2
4048: RNCC: 5 | RNVC: 9
85-693-4315: RNCC: 6 | RNVC: 9

23 Feb 1987

5120-14-221-9434
Tenaille Speciale

142219434
2-01561: RNCC: 3 | RNVC: 2
6115-1215: RNCC: 5 | RNVC: 2

1 Jan 1966

5120-14-485-4017
Screwdriver Bit

144854017
EV-12-12: RNCC: 3 | RNVC: 2
EV12.12: RNCC: 3 | RNVC: 2
3272670343900: RNCC: 5 | RNVC: 2

23 Jan 1997

5120-14-209-4215
Douille Tournevis E

142094215
RS.8: RNCC: 3 | RNVC: 2
3148515138805: RNCC: 5 | RNVC: 2
RS8: RNCC: 5 | RNVC: 2
41-06: RNCC: 5 | RNVC: 9
0513880: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-362-9621

5120-14-492-8758
Cle

144928758
P16891: RNCC: 3 | RNVC: 2
F300 0T 009 2145: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-499-6142
Cle

144996142
03250006: RNCC: 3 | RNVC: 2
F300 0T 023 5888: RNCC: 6 | RNVC: 9

29 Oct 1997

5120-14-457-9860
Seal Inserter And Remover

144579860
536828: RNCC: 3 | RNVC: 2

2 Oct 1992

5120-14-222-7394
Open End Wrench

142227394
20-6X7: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-357-5830
Ens Tour Outil Mont

143575830
8810485000: RNCC: 3 | RNVC: 2

7 Jun 1979

5120-14-228-7211

5120-14-362-7534

5120-14-288-2956
Adaptateur Cle

142882956
24145010800: RNCC: 3 | RNVC: 2
145J108: RNCC: 5 | RNVC: 9
241450108: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-558-2179
Socket Wrench Screwdriver Attachment

145582179
SHP.5ELA: RNCC: 3 | RNVC: 2

12 Sep 2008

5120-14-570-9660
Box Wrench Set

145709660
55A.JU8AT: RNCC: 3 | RNVC: 2
3148516983220: RNCC: 5 | RNVC: 2
698322: RNCC: 5 | RNVC: 2

8 Feb 2012

5120-14-577-1039
Spanner Wrench

145771039
T45119: RNCC: 3 | RNVC: 2

7 Aug 2013

5120-14-484-4158
Outil Emmanchement

144844158
MMG052-03: RNCC: 3 | RNVC: 2
MMG052-03: RNCC: 5 | RNVC: 2

14 Nov 1996

5120-14-493-1021
Cle

144931021
NO PRIMARY REF14-493-1021: RNCC: 3 | RNVC: 2
HV61: RNCC: 5 | RNVC: 9
F300 0T 010 2259: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-343-9812
Spanner Wrench

143439812
9970-115-673: RNCC: 3 | RNVC: 2
85-689-3597: RNCC: 6 | RNVC: 9

13 Jul 1977

5120-14-208-0967

5120-14-539-2647
Mechanical Puller Attachment

145392647
T632G3016221: RNCC: 3 | RNVC: 2

17 Dec 2003

5120-14-222-1646

5120-14-239-5209

5120-14-418-7306
Adaptateur Gicleur

144187306
853-201-914-0: RNCC: 3 | RNVC: 2

14 Sep 1987

5120-14-352-0847
Bearing Staking Installation Tool

143520847
341A93-3136-00: RNCC: 3 | RNVC: 2

16 Oct 1978

5120-14-266-7038

5120-14-279-1514

5120-14-040-2594
Open End Wrench

140402594
NO PRIMARY REF14-040-2594: RNCC: 3 | RNVC: 2
BE13-14X17: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-489-7226
Fuel Injection Nozzle Extractor

144897226
36291-00900: RNCC: 3 | RNVC: 2

13 Aug 1997

5120-14-420-7215
Socket Head Screw Key

144207215
6224-58355: RNCC: 3 | RNVC: 2

16 Dec 1987

5120-14-429-8245
Screwdriver Bit

144298245
EX.115: RNCC: 3 | RNVC: 2
162-7707: RNCC: 5 | RNVC: 2
3148510258058: RNCC: 5 | RNVC: 2
2695 715: RNCC: 5 | RNVC: 2
1059128P00: RNCC: 5 | RNVC: 2
EX115: RNCC: 5 | RNVC: 2
FACOMEX.115: RNCC: 5 | RNVC: 9
0025805: RNCC: 5 | RNVC: 9
EX15: RNCC: 5 | RNVC: 9

14 Feb 1989

5120-14-210-6905
Retaining Ring Pliers

142106905
593DI: RNCC: 3 | RNVC: 2

1 Jan 1964

5120-14-278-1984
Open End Wrench

142781984
28CLE: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-343-9814
Socket Wrench Socket

143439814
9970-115-627: RNCC: 3 | RNVC: 2
85-689-5621: RNCC: 6 | RNVC: 9

13 Jul 1977

5120-14-545-9820
Socket Wrench Screwdriver Attachment

145459820
FRF890-001EH206: RNCC: 3 | RNVC: 2
FRF890-001.06: RNCC: 5 | RNVC: 2

1 Jun 2005

5120-14-362-7876
Spanner Wrench

143627876
234200-78: RNCC: 3 | RNVC: 2
TF10A32504: RNCC: 5 | RNVC: 2
85-688-4601: RNCC: 6 | RNVC: 9

19 Mar 1980

5120-14-368-0562
Plaque Levage Gauch

143680562
24145001900: RNCC: 3 | RNVC: 2
241450019: RNCC: 5 | RNVC: 9

19 Jan 1981

5120-14-329-6347
De Centrage Obus

143296347
SMS244: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-463-7670
Manchon

144637670
428393Z: RNCC: 3 | RNVC: 2
M35489: RNCC: 5 | RNVC: 2

29 Jun 1993

5120-14-490-8767
Cle

144908767
4065 030 001 394: RNCC: 3 | RNVC: 2
F300 0T 000 5025: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-209-4223

5120-14-478-3048
Spanner Wrench

144783048
39977823: RNCC: 3 | RNVC: 2

24 Oct 1995

5120-14-247-8213

5120-14-428-8839
Outil Montage Boiti

144288839
350A93-3224-00: RNCC: 3 | RNVC: 2

22 Dec 1988

5120-14-440-4591
Bearing And Bushing Remover

144404591
90890-06219: RNCC: 3 | RNVC: 2

11 Jul 1990

5120-14-338-4681
Plaque De Guidage

143384681
PR47256: RNCC: 3 | RNVC: 2

6 Nov 1976

5120-14-313-7246
Faux Mors

143137246
C47069: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-360-6464
Crabot Monta Outils

143606464
8810161000: RNCC: 3 | RNVC: 2

19 Dec 1979

5120-14-319-9828
Open End Wrench

143199828
3CGF194: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-340-2970
Spanner Wrench

143402970
HSS831AH1510: RNCC: 3 | RNVC: 2

14 Feb 1977

5120-14-534-0875
Brake Shoe Adjusting Tool

145340875
713183: RNCC: 3 | RNVC: 2

12 Mar 2003

5120-14-521-4784
Socket Wrench Spanner Attachment

145214784
422609: RNCC: 3 | RNVC: 2
422609: RNCC: 5 | RNVC: 9

2 Aug 2000

5120-14-552-8090
Combination Box And Open End Wrench

145528090
40.28LA: RNCC: 3 | RNVC: 2
40.28LA: RNCC: 5 | RNVC: 2
3148516622075: RNCC: 5 | RNVC: 2

5 Feb 2007

5120-14-215-2407
Cle Speciale

142152407
PR46482: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-204-8223

5120-14-413-5280
Spanner Wrench

144135280
853-100-191-0: RNCC: 3 | RNVC: 2

17 Dec 1986

5120-14-442-5709
Open End Wrench

144425709
GS120-8X9: RNCC: 3 | RNVC: 2
1.70.1002: RNCC: 5 | RNVC: 2

22 Oct 1990

5120-14-228-5622
Socket Wrench Handle Bar

142285622
M1-053: RNCC: 3 | RNVC: 2
K.125A: RNCC: 3 | RNVC: 2
K125: RNCC: 5 | RNVC: 2
91333176: RNCC: 5 | RNVC: 2
C94: RNCC: 5 | RNVC: 2
3148510307107: RNCC: 5 | RNVC: 2
0030710: RNCC: 5 | RNVC: 9
K.125: RNCC: 5 | RNVC: 9

1 Jan 1966

5120-14-514-0136
Open End Wrench

145140136
ENFD29159-21X24: RNCC: 3 | RNVC: 2

22 Apr 1999

5120-14-221-2247
Dudgeonniere A Main

142212247
NO PRIMARY REF14-221-2247: RNCC: 3 | RNVC: 2
DG161922: RNCC: 5 | RNVC: 9

1 Jan 1966

5120-14-297-6197
Outillage Demontage

142976197
1-1038-01-12: RNCC: 3 | RNVC: 9
1-1038-01-12: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-352-3181
Open End Wrench

143523181
MHC336-41: RNCC: 3 | RNVC: 2
MHC361-22: RNCC: 5 | RNVC: 2
MHC336-41: RNCC: 5 | RNVC: 2

16 Oct 1978

5120-14-483-0696
Cross Tip Screwdriver

144830696
APS.1VSE: RNCC: 3 | RNVC: 2
CRU-5X100: RNCC: 3 | RNVC: 2
3148510094212: RNCC: 5 | RNVC: 2
162-2825: RNCC: 5 | RNVC: 2
0009421: RNCC: 5 | RNVC: 9
FACOMAPS.1VSE: RNCC: 5 | RNVC: 9
MO003134: RNCC: 6 | RNVC: 9

8 Aug 1996

5120-14-464-9058
Outillage Mandrin

144649058
851-919-010-0: RNCC: 3 | RNVC: 2

8 Sep 1993

5120-14-379-2402
Tube Packing Ring Installing Tool

143792402
NO PRIMARY REF14-379-2402: RNCC: 3 | RNVC: 2
RT35306: RNCC: 5 | RNVC: 9
85-691-9441: RNCC: 6 | RNVC: 9

6 Sep 1982

5120-14-409-0864
Screwdriver Bit

144090864
1039-5,5: RNCC: 3 | RNVC: 2
1039-5-5: RNCC: 5 | RNVC: 2
815009: RNCC: 5 | RNVC: 2

16 Apr 1986

5120-14-419-4140
Flat Tip Screwdriver

144194140
ACZ.12X250: RNCC: 3 | RNVC: 2
8035125G00: RNCC: 5 | RNVC: 2
91638789: RNCC: 5 | RNVC: 2
ACH.12X250: RNCC: 5 | RNVC: 2
ACH12X250: RNCC: 5 | RNVC: 2
168/495/5: RNCC: 5 | RNVC: 2
3148510039985: RNCC: 5 | RNVC: 2
0003998: RNCC: 5 | RNVC: 9

16 Oct 1987

5120-14-387-2769
Cle Speciale De 55

143872769
CM136-81ST05: RNCC: 3 | RNVC: 9

15 Sep 1983

5120-14-516-7187
Outillage

145167187
95948: RNCC: 3 | RNVC: 2

13 Oct 1999

5120-14-491-0163
Cle

144910163
4602 007 200 211: RNCC: 3 | RNVC: 2
F300 0T 001 0951: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-429-9909
Screwdriver Bit

144299909
AMX.1: RNCC: 3 | RNVC: 2
3148510086408: RNCC: 5 | RNVC: 2
AMX-1: RNCC: 5 | RNVC: 2
91627150: RNCC: 5 | RNVC: 2
0008640: RNCC: 5 | RNVC: 9

22 Feb 1989

5120-14-509-9572
Open End Wrench

145099572
22-260-1: RNCC: 3 | RNVC: 2
080201236700: RNCC: 5 | RNVC: 9
5120AA1120430: RNCC: 6 | RNVC: 9

4 Nov 1998

5120-14-549-2375
Combination Open End And Spanner Wrench

145492375
25243581-5: RNCC: 3 | RNVC: 2
3000210303: RNCC: 5 | RNVC: 2

14 Mar 2006

5120-14-325-4771

5120-14-266-3303

5120-14-563-3848
Flat Tip Screwdriver

145633848
ANF4X100: RNCC: 3 | RNVC: 2

3 Feb 2010

5120-14-567-5011
Drift

145675011
TM1516G001: RNCC: 3 | RNVC: 2

21 Mar 2011

5120-14-574-4879
Socket Wrench Socket

145744879
NS.10A: RNCC: 3 | RNVC: 2
3148516546456: RNCC: 5 | RNVC: 2
654645: RNCC: 5 | RNVC: 2

23 Jan 2013

5120-14-431-9067
Detent Handling Tool

144319067
60063: RNCC: 3 | RNVC: 2

10 May 1989

5120-14-443-9580
Socket Wrench Socket

144439580
W274M: RNCC: 3 | RNVC: 9

17 Dec 1990

5120-14-490-8783
Tournevis

144908783
4065 200 000 430: RNCC: 3 | RNVC: 2
F300 0T 000 5046: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-368-2070
Spanner Wrench

143682070
87PAA: RNCC: 3 | RNVC: 2

20 Feb 1981

5120-14-228-7212

5120-14-232-7179

5120-14-345-5506
Axe Veri Extracteur

143455506
35AM012: RNCC: 3 | RNVC: 2
85-689-5024: RNCC: 6 | RNVC: 9

5 Oct 1977

5120-14-551-0062
Vise Jaw Caps

145510062
F47122: RNCC: 3 | RNVC: 2

18 Aug 2006

5120-14-384-7414
Electrical Card Extractor

143847414
16928972: RNCC: 3 | RNVC: 2
16928972: RNCC: 5 | RNVC: 9

2 Jun 1983

5120-14-471-8472
Socket Wrench Extension

144718472
39559542: RNCC: 3 | RNVC: 2
39559542: RNCC: 5 | RNVC: 9

21 Sep 1994

5120-14-384-5511
Face Spanner Wrench Socket

143845511
226439: RNCC: 3 | RNVC: 2
00063050: RNCC: 5 | RNVC: 2
063050: RNCC: 5 | RNVC: 2

2 Jun 1983

5120-14-303-7085
Flat Tip Screwdriver

143037085
ATHH.10X175: RNCC: 3 | RNVC: 2
3148510118802: RNCC: 5 | RNVC: 2
ATHH175: RNCC: 5 | RNVC: 9
0011880: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-542-4108

5120-14-357-9995
Montage Ess Support

143579995
MFG234-23: RNCC: 3 | RNVC: 2
MFG234-23: RNCC: 5 | RNVC: 2

20 Jul 1979

5120-14-570-7648
Pliers

145707648
237-16G: RNCC: 3 | RNVC: 2

23 Jan 2012

5120-14-297-7695
Open End Wrench

142977695
6800-2219: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-433-6278
Socket Head Screw Key

144336278
6254-57287: RNCC: 3 | RNVC: 2

2 Aug 1989

5120-14-319-4301
Douille Embout Haxa

143194301
C91829Y: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-316-6625

5120-14-358-7275

5120-14-477-1531
Daxe Extracteur

144771531
6390-121E27-503-69-1: RNCC: 3 | RNVC: 2
5120AA2078417: RNCC: 6 | RNVC: 9

26 Jul 1995

5120-14-546-3452
Bearing And Bushing Inserter And Remover

145463452
T321G30T0003: RNCC: 1 | RNVC: 2
F27100000: RNCC: 3 | RNVC: 2

27 Jun 2005

5120-14-424-9829
Wrench Extension Handle

144249829
M4HZ7101943002: RNCC: 3 | RNVC: 2

16 Jun 1988

5120-14-437-9367
Detent Handling Tool

144379367
100533: RNCC: 3 | RNVC: 2
A132595: RNCC: 5 | RNVC: 2

28 Feb 1990

5120-14-511-7611
Spanner Wrench

145117611
C04051103: RNCC: 3 | RNVC: 2
C04051103: RNCC: 5 | RNVC: 9

15 Jan 1999

5120-14-383-6537
Spanner Wrench

143836537
12434J: RNCC: 3 | RNVC: 2

11 Apr 1983

5120-14-484-6534
Socket Head Screw Key

144846534
83SH.12: RNCC: 3 | RNVC: 2
3148511238363: RNCC: 5 | RNVC: 2
91777969: RNCC: 5 | RNVC: 2
235-2836: RNCC: 5 | RNVC: 2
0715 311 55: RNCC: 5 | RNVC: 2
0123836: RNCC: 5 | RNVC: 9
FACOM83SH.12: RNCC: 5 | RNVC: 9

28 Nov 1996

5120-14-323-9247

5120-14-334-8053
Socket Wrench Socket

143348053
0051320: RNCC: 3 | RNVC: 2
R.12L: RNCC: 5 | RNVC: 2
R12L: RNCC: 5 | RNVC: 2

2 Jun 1976

5120-14-571-7346
Impact Type Bit Set And Handle Screwdriver

145717346
270-A: RNCC: 3 | RNVC: 2

26 Apr 2012

5120-14-376-8252
Pliers

143768252
NO PRIMARY REF14-376-8252: RNCC: 3 | RNVC: 2
0218375: RNCC: 5 | RNVC: 9
22218375: RNCC: 5 | RNVC: 9

28 Apr 1982

5120-14-493-1990
Lame

144931990
000005R5: RNCC: 3 | RNVC: 2
F300 0T 011 2826: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-210-4304

5120-14-241-1446
Extracteur Daxe De

142411446
0621-78: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-237-7106

5120-14-264-7868
Des Forgeron Etampe

5120-14-490-6881
Drill

144906881
240 D 01884 008: RNCC: 3 | RNVC: 2
F300 0T 000 0990: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-490-6957
Handle

144906957
241 H 01541 000: RNCC: 3 | RNVC: 2
F300 0T 000 1096: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-200-1394
Cle A Pied

142001394
8000024803A: RNCC: 3 | RNVC: 2

1 Jan 1962

5120-14-281-2909
Mandrin Depose Roul

142812909
A0100278: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-441-9027
Etrier De Montage

144419027
236165: RNCC: 3 | RNVC: 9

25 Sep 1990

5120-14-325-1389
Electronic Equipment Tuning Wand

143251389
436877: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-395-0770
Mandrin De Pose

143950770
H46676: RNCC: 3 | RNVC: 2

2 Oct 1984

5120-14-431-2735
Kit Dadaptation

144312735
Y00-054: RNCC: 3 | RNVC: 2

12 Apr 1989

5120-14-487-0850
Ens Poignees Lci

144870850
VALISE POIGNEES LCI: RNCC: 3 | RNVC: 2

4 Apr 1997

5120-14-462-5868
Cache Signalisation

144625868
C47645: RNCC: 3 | RNVC: 2

28 Apr 1993

5120-14-578-2021
Plug Electrical Connector Extractor

145782021
260415289: RNCC: 3 | RNVC: 2

12 Nov 2013

5120-14-284-1924

5120-14-238-5789

5120-14-285-6257

5120-14-401-8568
Outillage Rodage

144018568
25545902200: RNCC: 3 | RNVC: 2
255459022: RNCC: 5 | RNVC: 9

13 Jun 1985

5120-14-275-6822

5120-14-253-5836

5120-14-236-6007

5120-14-567-2003
Combination Box And Open End Wrench

145672003
440.35: RNCC: 3 | RNVC: 2
768212: RNCC: 5 | RNVC: 2
3148517682122: RNCC: 5 | RNVC: 2

21 Feb 2011

5120-14-325-0283
Tas De Rodage

143250283
0S21452: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-032-0882
Reglag Recala Outil

140320882
NO PRIMARY REF14-032-0882: RNCC: 3 | RNVC: 2
42-106-04-044M1: RNCC: 5 | RNVC: 9

5 Jul 1980

5120-14-271-7606
Tige De Demontage

142717606
3026-1151ET1152: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-464-2987
Spanner Wrench

144642987
683061132: RNCC: 3 | RNVC: 2
6830-61132: RNCC: 5 | RNVC: 2

28 Jul 1993

5120-14-334-3454
Support Equilibrage

143343454
425-65064-000: RNCC: 3 | RNVC: 2
425-65064-000: RNCC: 5 | RNVC: 2

23 Apr 1976

5120-14-520-0333
Drift

145200333
330A98-3280-21: RNCC: 3 | RNVC: 2

3 May 2000

5120-14-281-1950
Socket Wrench Socket

142811950
65LT16: RNCC: 3 | RNVC: 2
SL-16: RNCC: 3 | RNVC: 2
SL16: RNCC: 3 | RNVC: 2
3272670273610: RNCC: 5 | RNVC: 2
S16L: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-427-2021
Extracteur Etrier

144272021
46AM004-01-0006: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-337-5394
Secteur De Serrage

143375394
0057260: RNCC: 3 | RNVC: 2
S.200N: RNCC: 5 | RNVC: 2
S200N: RNCC: 5 | RNVC: 2

7 Oct 1976

5120-14-220-8562
Cle A Ergots Specia

142208562
PR46753: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-456-8974
Sertiss. Axes Pince

144568974
1055806S00: RNCC: 3 | RNVC: 2

29 Jul 1992

5120-14-407-6107
Cle Immobilisation

144076107
601500: RNCC: 3 | RNVC: 2
601500: RNCC: 5 | RNVC: 9

27 Feb 1986

5120-14-228-5186

5120-14-234-3705
Appareil Montage De

142343705
202499: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-458-3114
Bearing And Bushing Inserter And Remover

144583114
45215413: RNCC: 3 | RNVC: 2
45215413: RNCC: 5 | RNVC: 9

15 Oct 1992

5120-14-226-3748

5120-14-556-9008
Electrical Connector Inserter

145569008
006101 003 00: RNCC: 3 | RNVC: 2

21 Apr 2008

5120-14-413-4915
Etau Dangle

144134915
102: RNCC: 3 | RNVC: 2
SAM102: RNCC: 5 | RNVC: 9

17 Dec 1986

5120-14-382-5516
Electrical Card Extractor

143825516
NO PRIMARY REF14-382-5516: RNCC: 3 | RNVC: 2
20685551: RNCC: 5 | RNVC: 9

17 Feb 1983

5120-14-226-7567
Combination Box And Open End Wrench

142267567
40.13/16: RNCC: 3 | RNVC: 2
50-13/16: RNCC: 3 | RNVC: 2
3148511008805: RNCC: 5 | RNVC: 2
40 13-16: RNCC: 5 | RNVC: 2
40-13-16: RNCC: 5 | RNVC: 2
3272670269323: RNCC: 5 | RNVC: 2
50 13-16: RNCC: 5 | RNVC: 2
0713 303 10: RNCC: 5 | RNVC: 2
40.13/16: RNCC: 5 | RNVC: 2
0100880: RNCC: 5 | RNVC: 9

1 Jan 1966

5120-14-541-9839
Final Drive Assembly Alignment Pin

145419839
20026-079: RNCC: 3 | RNVC: 2
502105005039A: RNCC: 3 | RNVC: 9
2 0026-079: RNCC: 5 | RNVC: 2

2 Jul 2004

5120-14-404-2699
Cle

144042699
DLT035293: RNCC: 3 | RNVC: 2

11 Sep 1985

5120-14-240-4190

5120-14-244-6561

5120-14-395-7152

5120-14-259-6647
Cle Speciale

142596647
158601: RNCC: 3 | RNVC: 2

1 Jan 1969

5120-14-362-1776
Etancheite Outillag

143621776
SK20227: RNCC: 3 | RNVC: 2

20 Feb 1980

5120-14-209-9027

5120-14-361-1884

5120-14-275-2600
Broche Pour Cle

142752600
80900-26: RNCC: 3 | RNVC: 2
77175-3: RNCC: 5 | RNVC: 2

8 Mar 2000

5120-14-464-4929
Socket Wrench Socket

144644929
851-912-022-0: RNCC: 3 | RNVC: 2

4 Aug 1993

5120-14-380-3344
Electrical Card Extractor

143803344
12-066-600: RNCC: 3 | RNVC: 2
12-066-600: RNCC: 5 | RNVC: 2
12-066-600: RNCC: 5 | RNVC: 9

8 Nov 1982

5120-14-393-2270
Cle Siege Robinet

143932270
7M296: RNCC: 3 | RNVC: 2
STI285-33: RNCC: 5 | RNVC: 2

12 Apr 1984

5120-14-041-4859
Offset Screwdriver

140414859
N418-02B: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-317-7196
Spanner Wrench

143177196
NO PRIMARY REF14-317-7196: RNCC: 3 | RNVC: 2
19447: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-312-5311
Etrier De Depose

143125311
9970-111-103: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-264-9594
Spanner Wrench

142649594
0338-78: RNCC: 3 | RNVC: 2
RA338: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-358-8502
Screw Thread Insert Inserter

143588502
01500212460: RNCC: 3 | RNVC: 2

7 Sep 1979

5120-14-394-7265
Spanner Wrench

143947265
YA003200: RNCC: 3 | RNVC: 2
YA0032: RNCC: 5 | RNVC: 2

28 Aug 1984

5120-14-488-6846
Embout Montage Cle

144886846
287073808: RNCC: 3 | RNVC: 2
F300 0T 018 9336: RNCC: 6 | RNVC: 9

28 May 1997

5120-14-522-3832
Bearing Staking Installation Tool

145223832
TC3126G001: RNCC: 3 | RNVC: 2
8817126000: RNCC: 5 | RNVC: 2

25 Oct 2000

5120-14-462-9117
Seal Inserter And Remover

144629117
45057918: RNCC: 3 | RNVC: 2
45057918: RNCC: 5 | RNVC: 9

5 May 1993

5120-14-220-7883
Open End Wrench

142207883
RACC71: RNCC: 3 | RNVC: 2
RACC71: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-262-4683
Pince Porte-Vis

142624683
1195: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-201-5343

5120-14-353-2122
Spanner Wrench

143532122
VDP7533: RNCC: 3 | RNVC: 2

8 Dec 1978

5120-14-506-2783
Electrical Connector Inserter

145062783
0457684Q00: RNCC: 3 | RNVC: 2

20 Apr 1998

5120-14-215-2253
Cle Speciale

142152253
RT2662: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-526-1561
Detent Handling Tool

145261561
132223: RNCC: 3 | RNVC: 2

4 Jul 2001

5120-14-532-3430
Socket Wrench Crowfoot Attachment

145323430
305328: RNCC: 3 | RNVC: 2
305328: RNCC: 5 | RNVC: 2

30 Oct 2002

5120-14-281-1877
Socket Head Screw Key

142811877
4608: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-383-0606
Emmanchement Roulem

143830606
F47198: RNCC: 3 | RNVC: 2

17 Mar 1983

5120-14-216-1279

5120-14-274-8547
Open End Wrench

142748547
BB100: RNCC: 3 | RNVC: 9

1 Jan 1971

5120-14-380-8403
Spanner Wrench

143808403
PR47625: RNCC: 3 | RNVC: 2
PR47725: RNCC: 5 | RNVC: 2

14 Dec 1982

5120-14-524-8923
Socket Wrench Socket

145248923
SJ.21: RNCC: 3 | RNVC: 2

25 Apr 2001

5120-14-282-8785
Spanner Wrench

142828785
0243-78: RNCC: 3 | RNVC: 2
RA243: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-325-8925

5120-14-226-3715

5120-14-393-8800
Bague De Retrait

143938800
NO PRIMARY REF14-393-8800: RNCC: 3 | RNVC: 2
OU138188: RNCC: 5 | RNVC: 9

23 Jun 1984

5120-14-490-6988
Wrench

144906988
241 W 00609 000: RNCC: 3 | RNVC: 2
F300 0T 000 1169: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-221-6394
Cle De Demontage

142216394
NO PRIMARY REF14-221-6394: RNCC: 3 | RNVC: 2
H90P1004: RNCC: 5 | RNVC: 2
H90P1004: RNCC: 5 | RNVC: 9

1 Jan 1966

5120-14-570-7632
Flat Tip Screwdriver

145707632
TB-4E100: RNCC: 3 | RNVC: 2

23 Jan 2012

5120-14-373-0047
Chargeur De Joints

143730047
STM066-10: RNCC: 3 | RNVC: 2
85-691-1776: RNCC: 6 | RNVC: 9

21 Sep 1981

5120-14-377-2792
Face Spanner Wrench Socket

143772792
TMY20-32-313: RNCC: 3 | RNVC: 2

17 May 1982

5120-14-393-3984
Spanner Wrench Handle

143933984
D83-54P4: RNCC: 3 | RNVC: 2

7 Apr 1984

5120-14-321-9556
Cle A Panier

143219556
GSM196-010F32: RNCC: 3 | RNVC: 2
GSM196-10F32: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-201-9572
Open End Wrench

142019572
E74302S12X14AKB: RNCC: 2 | RNVC: 2
13L12X14: RNCC: 3 | RNVC: 2
44 12X14CP: RNCC: 3 | RNVC: 2
44-12X14CP: RNCC: 3 | RNVC: 2
10NC12X14: RNCC: 3 | RNVC: 2
44S12X14: RNCC: 5 | RNVC: 2

1 Jan 1962

5120-14-379-0072
Socket Head Screw Key

143790072
PLU20-200: RNCC: 3 | RNVC: 2

6 Sep 1982

5120-14-442-1519
Serre Toles Outil

144421519
853-600-251-6: RNCC: 3 | RNVC: 2

3 Oct 1990

5120-14-352-2751

5120-14-240-6143

5120-14-436-0231
Extracteur Filtre

144360231
807634: RNCC: 3 | RNVC: 2
059090: RNCC: 5 | RNVC: 9

29 Nov 1989

5120-14-270-8739

5120-14-490-8890
Filiere

144908890
4067 170 000 416: RNCC: 3 | RNVC: 2
F300 0T 000 5162: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-352-4674
Montage Roues Outil

143524674
14369-5010A: RNCC: 3 | RNVC: 2

16 Oct 1978

5120-14-457-5355
De Suppo Entretoise

144575355
5010054816: RNCC: 3 | RNVC: 2

10 Sep 1992

5120-14-283-3978

5120-14-560-4517
Torque Wrench

145604517
994111: RNCC: 3 | RNVC: 2

21 Apr 2009

5120-14-314-6429

5120-14-441-0404
Vilebreq Entraineur

144410404
8-0110EZ: RNCC: 3 | RNVC: 2
131194: RNCC: 5 | RNVC: 2

16 Aug 1990

5120-14-434-7876
Sheet Metalworking Stake

144347876
853-670-050-0: RNCC: 3 | RNVC: 2

4 Oct 1989

5120-14-385-3382
Spanner Wrench

143853382
365A93-3500-00: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-564-3602
Pinch Bar

145643602
62391510AA: RNCC: 3 | RNVC: 2

26 Apr 2010

5120-14-567-3607
Spanner Wrench

145673607
82589740000: RNCC: 3 | RNVC: 2

9 Mar 2011

5120-14-380-8410
Potence Adaptateur

143808410
F21987: RNCC: 3 | RNVC: 2

14 Dec 1982

5120-14-494-1646
Cle

144941646
956138125: RNCC: 3 | RNVC: 2
F300 0T 015 7678: RNCC: 6 | RNVC: 9

15 Oct 1997

5120-14-571-2254
Crimping Tool Die

145712254
985916: RNCC: 3 | RNVC: 2
FACOM 985916: RNCC: 5 | RNVC: 2

1 Mar 2012

Load More Results