What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.

A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Blacksmith's Punch?

A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Mechanical Finger?

A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.

A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Screwdriver And Wrench Assembly?

A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Stakeholder Bench Plate?

A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.

What is a Drill Drift?

A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.

A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Digging Bar?

A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

What is a Valve Spring Lifter?

A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.

What is a Fuse Puller?

A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.

Hand Tools, Nonedged, Nonpowered - France (FR)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by France (FR) - NCB is 14

Page 38 of 110

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by France

51	20	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - France (FR)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 16 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Pipe Vise? 19 Items: A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.
What is a Hand Vise? 25 Items: A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.
What is a Hand Hydraulic Jack? 133 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 153 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 903 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 17 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
Swage,Bottom,Blacksmith's 10 Items
What is a Hand Tube Flaring Tool? 23 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Blacksmith's Punch? 12 Items: A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.
What is a Drain Plug Wrench? 45 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 57 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 16 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 3829 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
Flatter,Blacksmith's 18 Items
Swage,Top,Blacksmith's 12 Items
What is a Pipe Wrench? 110 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 149 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 53 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
Screwdriver,Offset 54 Items
What is a Screwdriver Bit? 707 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Mechanical Finger? 25 Items: A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.
What is a Socket Wrench Socket? 1803 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 1412 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 1641 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 52 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 565 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
Jack,Push-Pull,Screw 30 Items
What is a Hand Tube Bender? 54 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 1106 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 55 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pinch Bar? 19 Items: A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.
What is a Pry Bar? 17 Items: A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.
What is a Wrecking Bar? 15 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 273 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 413 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 32 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 295 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
Face,Hammer,Inserted 25 Items
What is a Hole Sheet Metal Holder? 37 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Screwdriver And Wrench Assembly? 11 Items: A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.
What is a Hand Rivet Set? 121 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Stakeholder Bench Plate? 22 Items: A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.
What is a Drill Drift? 32 Items: A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.
What is a Tack Claw? 15 Items: A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.
Mattock 28 Items
What is a Socket Wrench Handle Bar? 108 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Stake,Sheet Metalworking 50 Items
Riveter,Blind,Hand 76 Items
What is a Hand Shovel? 43 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 98 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 30 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
What is a Digging Bar? 20 Items: A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.
Block,Dolly,Sheet Metalworking 56 Items
What is a Piston Ring Compressor? 34 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Valve Spring Lifter? 29 Items: A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.
What is a Fuse Puller? 20 Items: A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.
What is a Hand Lead Seal Press? 18 Items: A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.
What is a Hand Beading Tool? 91 Items: A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.
What is a Hand Hammer? 502 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
Head,Hand Hammer 81 Items
What is a Lamp Extractor? 76 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Tube Packing Ring Installing Tool? 29 Items: A Tube Packing Ring Installing Tool (INSTALLING TOOL,TUBE PACKING RING) is an item designed to insert packing rings on tubes within tube sheets on condensers and similar heat exchangers. In operation, the packing rings are assembled on the loading pin mandrel and are then transferred from the mandrel on to the tube by means of a tubular sleeve which slides on the mandrel.
What is a Carpenters' Pincers? 18 Items: A Carpenters' Pincers (PINCERS,CARPENTERS') is a plierlike hand tool having two opposing jaws which may have hammerlike backs. One handle has a nail or tack pulling claw, the other is shaped to form a screwdriver. The tool may contain a wire cutter. See also NIPPERS, END CUTTING and PINCERS, FARRIERS'.
What is a Trowel? 33 Items: A Trowel is a tool used for bricklaying, concrete work, plastering, linoleum laying, and masonry work. Excludes CORNER TOOL, CONCRETE.
What is a Hand Abrasive Wheel Dresser? 12 Items: A Hand Abrasive Wheel Dresser (DRESSER,ABRASIVE WHEEL,HAND) is a tool designed to remove glaze from, dress, shape, sharpen, and true solid abrasive wheels. Excludes NIB, DIAMOND, WHEEL DRESSING.
What is a Lamp Cap Extractor? 32 Items: A Lamp Cap Extractor (EXTRACTOR,LAMP CAP) is a tool specifically designed to facilitate the removal of lamp caps from switchboards, panels or indicator lamps.
What is a Rivet Bucking Bar? 51 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 86 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 277 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Woven Cable Grip? 23 Items: A Woven Cable Grip (GRIP,CABLE,WOVEN) is a braided wire device designed to clutch a bare or insulated conductor, cable or wire rope, for holding taut or drawing through conduit.
What is a Screw Thread Insert Extractor? 19 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is an Electron Tube Extractor? 18 Items: An Electron Tube Extractor (EXTRACTOR,ELECTRON TUBE) is a hand tool designed to facilitate the removal of electron tubes from electronic equipment and to avoid burning the fingers. It may be used for installing tubes.
What is a Cross Tip Screwdriver? 362 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 21 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 11 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 37 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Tool Handle Wedge? 10 Items: A Tool Handle Wedge (WEDGE,TOOL HANDLE) is excludes WEDGE, WOOD.
What is a Marlinespike? 16 Items: A Marlinespike is a metal hand tool made in the shape of a tapered pin. One end is pointed and the opposite end may be headed. The body may contain an eye for a lanyard sling, or be grooved lengthwise. Excludes CABLE PICK and FID.
What is an Aligning Punch? 272 Items: An Aligning Punch (PUNCH,ALIGNING) is a round, square, hexagonal or octagonal bodied hand tool, having a round tapered section 6-1/2 inches (165.1 mm) or more in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, DRIFT and DRIFTPIN.
What is a Drift Punch? 25 Items: A Drift Punch (PUNCH,DRIFT) is a round, square, hexagonal, or octagonal bodied hand tool, having a round tapered section 4 to 6 inches (101.6 mm to 152.4 mm) inclusive in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, ALIGNING; and DRIFTPIN.
What is a Putty Knife? 36 Items: A Putty Knife (KNIFE,PUTTY) is a hand tool with a nonedged blade fixed to a handle for laying on and smoothing putty and the like.
What is a Socket Wrench Adapter-Extension? 40 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 30 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 184 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Socket Wrench Ratchet Attachment? 47 Items: A Socket Wrench Ratchet Attachment (RATCHET ATTACHMENT,SOCKET WRENCH) is a connection for socket wrenches and handles. Consists of a ratcheting mechanism with an internal drive on one end and an external drive on the opposite end of the same size. The item is designed to permit continuous rotation of the socket in one direction without removing the socket or handle and without a complete rotation of the handle.
What is a Wrench Extension Handle? 81 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Socket Wrench Crowfoot Attachment? 155 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 33 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 43 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 48 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 2394 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 372 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 300 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 661 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 32 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand-Operated Grommet And Eyelet Press? 12 Items: A Hand-Operated Grommet And Eyelet Press (PRESS,GROMMET AND EYELET,HAND-OPERATED) is a device which punches or pierces holes and in addition fastens or sets eyelets and grommets in cloth, paper and similar material. May be used for fastening or setting rivets, lacing hooks and snaps in cloth, paper and similar material. It is hand operated by lever or screw action. See also PUNCH, EYELET, PLIER TYPE and PRESS, GROMMET AND EYELET, FOOT OPERATED.
What is a Claw Bar? 19 Items: A Claw Bar (BAR,CLAW) is before using, refer to Reference Drawing Group AG.
What is a Shock Type Wheel Stud Nut Wrench? 11 Items: A Shock Type Wheel Stud Nut Wrench (WRENCH,WHEEL STUD NUT,SHOCK TYPE) is a manually operated item designed to remove wheel stud nuts. In operation the inner nut is turned by a socket attached to a shaft on which is a loose swinging weighted handle. The weighted handle may be swung quickly to provide an impact force against the socket to loosen the seized or jammed nuts. The outer nut is held stationary by a separate hexagonal holding wrench.
What is a Drift Pin Set? 30 Items: A Drift Pin Set is a group of DRIFTPIN having different characteristics.
What is a Tire Iron? 25 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 115 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Blacksmith's Vise? 14 Items: A Blacksmith's Vise (VISE,BLACKSMITH'S) is a clamping device consisting of a mounting plate, one stationary and one manual screw actuated jaw and a supporting member extending downward from the stationary jaw to the floor. Designed to be mounted on a bench, table or the like. May include pipe holding jaws.
What is a Machinist's Vise? 64 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Clamp Base Bench Vise? 10 Items: A Clamp Base Bench Vise (VISE,BENCH,CLAMP BASE) is a clamping device consisting of a base, one stationary and one manual screw actuated jaw, and one or more guide bars or rods. Designed with an integral clamp for attaching to a bench, table, or the like. Does not include pipe holding jaws.
What is a Fixed Open End Wrench Set? 86 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Nail Set? 11 Items: A Nail Set is a round knurled, square, hexagonal or octagonal bodied hand tool having a round tapered section terminating in a cupped point. It is designed to set brad head nails below the surface by striking it a hammerlike blow. See also PUNCH, DRIVE PIN.
What is a Socket Wrench Set? 202 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is an Open End Box Wrench Set? 10 Items: An Open End Box Wrench Set (WRENCH SET,OPEN END BOX) is a group of WRENCH, OPEN END BOX having different characteristics.
What is a Combination Box And Open End Wrench Set? 72 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Box Wrench Set? 36 Items: A Box Wrench Set (WRENCH SET,BOX) is a group of box wrenches having different characteristics. It may include a HANDLE, EXTENSION WRENCH. See also WRENCH SET, COMBINATION, BOX AND OPEN END.
What is a Hot Line Stick? 26 Items: A Hot Line Stick is a hand tool consisting of a straight, round stick (pole) made of a suitable nonconductive material with a tool fixed to one end. The other end may be plain or have a butt mounting device fixed to it. Various types of attachments (hooks, rings, and bands) may be fixed to the body. It is designed for use in the repair and maintenance of live high voltage aerial lines. Excludes hot line sticks without heads.
Handle,Mattock-Pick 15 Items
What is a Wrench Kit? 73 Items: A Wrench Kit is an assortment of various types and sizes of wrenches such as SOCKET, SOCKET WRENCH; WRENCH, OPEN END, FIXED; WRENCH, BOX and the like. It may include adapter(s), ratchet(s) and the like. See also WRENCH SET (as modified.
What is a Brad Awl? 15 Items: A Brad Awl (AWL,BRAD) is a small, pointed tool used by shoemakers, saddlers, cabinetmakers, and the like for piercing small holes in wood, leather, and similar materials, and consists of a handle with a ferrule and a blade. The blade is round, terminating in a beveled, sharp straight edge and has a shank which passes through the center of the handle.
What is a Scratch Awl? 20 Items: A Scratch Awl (AWL,SCRATCH) is an item whose nominal length of blade is less than 4 inches (101.6 millimeters) and is provided with a nondetachable handle.
What is a Screw Extractor Set? 10 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 102 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
Jack,Scissors,Hand 26 Items
What is a Piston Ring Expander? 23 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
Mallet,Plastic 62 Items
Mallet,Rubber 10 Items
What is a Wood Mallet? 37 Items: A Wood Mallet (MALLET,WOOD) is excludes MALLET, CALKING; MALLET, HAWSING and MALLET, SERVING.
What is a Rack Bar Jack? 30 Items: A Rack Bar Jack (JACK,RACK BAR) is excludes JACK, BUMPER and JACK, REEL, HAND.
What is a Pneumatic Tire Valve Core Inserter And Remover? 14 Items: A Pneumatic Tire Valve Core Inserter And Remover (INSERTER AND REMOVER,PNEUMATIC TIRE VALVE CORE) is a bar of steel having a small cylindrical slotted end for removing or installing a valve core in a valve stem by a screwing motion. See also REPAIR TOOL, PNEUMATIC TIRE VALVE.
What is a Hand Tube Swaging Tool Kit? 20 Items: A Hand Tube Swaging Tool Kit (SWAGING TOOL KIT,TUBE,HAND) is a hand-operated noncutting tool consisting of one or more PUNCH, TUBE SWAGING, HAND and a tube flaring bar.
What is a Hand Tube Flaring Punch? 11 Items: A Hand Tube Flaring Punch (PUNCH,TUBE FLARING,HAND) is a noncutting tool having a shaped end or section designed to flare the ends of tubes. One type is designed to flare the ends of tubes against a tube sheet, and another to flare tube ends to mate with tube fittings. Includes punch components of FLARING TOOL, TUBE, HAND.
What is a Hose Strap Band Clamping Tool? 26 Items: A Hose Strap Band Clamping Tool (CLAMPING TOOL,STRAP BAND,HOSE) is an item designed to tension and lock metal straps around a rubber hose, and the like. It is also used to clamp and hold fittings therein.
What is a Mechanical Puller? 3073 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 470 Items
What is a Slip Joint Pliers? 84 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Brake Repair Pliers? 14 Items: A Brake Repair Pliers (PLIERS,BRAKE REPAIR) is a tool having jaws designed for use in brake repair operations, such as removing and replacing items such as keys, springs, and the like. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 226 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 12 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 81 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 56 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 15 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 11 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 29 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Cross Tip Screwdriver Set? 14 Items: A Cross Tip Screwdriver Set (SCREWDRIVER SET,CROSS TIP) is a group of SCREWDRIVER, CROSS TIP having different characteristics.
What is a Spanner Wrench Set? 18 Items: A Spanner Wrench Set (WRENCH SET,SPANNER) is a group of items under WRENCH, SPANNER having different characteristics.
What is a Drive Pin Punch Set? 31 Items: A Drive Pin Punch Set (PUNCH SET,DRIVE PIN) is a group of PUNCH, DRIVE PIN having different characteristics.
What is an Aligning Punch Set? 13 Items: An Aligning Punch Set (PUNCH SET,ALIGNING) is a group of PUNCH, ALIGNING having different characteristics. See also DRIFTPIN SET.
What is a Slugging Type Box Wrench Socket? 16 Items: A Slugging Type Box Wrench Socket (SOCKET,SLUGGING TYPE BOX WRENCH) is an item having a hexagonal external drive at one end, made to fit into the internal hexagonal or 12-point opening of a slugging type box wrench. The opposite end has a single-broached hexagonal opening of the same size as the external drive. The item is designed with extra thick walls to withstand the impact of sledge blows on the driving wrench.
What is a Mechanical Puller Step Plate? 44 Items: A Mechanical Puller Step Plate (STEP PLATE,MECHANICAL PULLER) is a circular disk, flanged to provide a shoulder, and designed to provide a base for the screw point of a PULLER, MECHANICAL when pulling externally mounted bearings, gears, and the like from hollow shafts or housings. It has a concentric, countersunk hole to accommodate the puller screw point.
What is a Solid Center Punch? 79 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Cable Type Ratchet Lever Puller? 20 Items: A Cable Type Ratchet Lever Puller (PULLER,RATCHET LEVER,CABLE TYPE) is an item consisting of a metal frame and ratchet lever reel to which is attached one end of a flexible cable (wire rope). The cable feeds through the fast eye in the metal frame, and may be reeved through a slip hook tackle hook. See also BINDER, LOAD; HOIST, WIRE ROPE and STRETCHER, WIRE.
What is an Electronic Equipment Tuning Wand? 18 Items: An Electronic Equipment Tuning Wand (TUNING WAND,ELECTRONIC EQUIPMENT) is a hand-held rod used in determining the adjustment of the windings of a radio frequency coil. It is made of insulating material with iron on one end and brass on the other end. By inserting the iron end in the coil, the inductance is increased and by inserting the brass end, the inductance is decreased.
What is a Combination Open End And Spanner Wrench? 14 Items: A Combination Open End And Spanner Wrench (WRENCH,OPEN END AND SPANNER,COMBINATION) is a tool having open end wrench characteristics at one end and spanner wrench features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s) at the other end.
What is a Detent Handling Tool? 187 Items: A Detent Handling Tool (HANDLING TOOL,DETENT) is a specially designed handling tool consisting of a rigid bar with a T-handle on one end. The other end is equipped with threads designed to mate the threads of a detent to facilitate inserting or extracting.
What is a Hand Material Handling Hook? 23 Items: A Hand Material Handling Hook (HOOK,MATERIAL HANDLING,HAND) is a hook whose curved end conforms to Style AP1, AP2, AP3 or AP4 of Reference Drawing Group AP. Excludes HOOK, MANHOLE COVER, HAND; HOOK, WIRE BREAKING, HAND; HOOK, ROCK CRUSHER FEEDING, HAND; HOOK, STRAINER REMOVING, HAND and HOOKS, BAG HANDLING, HAND.
What is a Magnetic Retrieving Tool? 11 Items: A Magnetic Retrieving Tool (RETRIEVING TOOL,MAGNETIC) is a hand-operated magnetic device used to locate and pick up metallic articles, such as bolts, nuts, pins, washers, and the like, in confined spaces. It may be rigid, flexible or adjustable. Excludes FINGER, MECHANICAL.
What is a Mechanical Puller Adapter? 78 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Combination Box And Open End Box Wrench? 13 Items: A Combination Box And Open End Box Wrench (WRENCH,BOX AND OPEN END BOX,COMBINATION) is a double end wrench, box and open end box, primarily designed for removing or replacing tube fittings. The opening in the open end box may be machined at an angle from the longitudinal center line of the wrench.
What is a Screw Thread Insert Inserter? 136 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Flat Tip Screwdriver Set? 48 Items: A Flat Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP) is a group of SCREWDRIVER, FLAT TIP having different characteristics.
What is a Terminal Crimping Tool Contact Positioner? 89 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 16 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is an Adjustable Wrench? 138 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 239 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 75 Items
Handle,Shovel 10 Items
What is a Socket Wrench Spanner Attachment? 88 Items: A Socket Wrench Spanner Attachment (SPANNER ATTACHMENT,SOCKET WRENCH) is an item having an adjustable or fixed span with pin, hook, or key type end that is used to fit and turn various size retaining rings, cover plates, plugs, couplings, and like parts. Usually designed to be driven by a male driver.
What is a Retaining Ring Installation Tool? 44 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Tacker? 16 Items: A Tacker is a hand-operated, hammerlike or gunlike item without a clincher, used to drive preformed connecting elements like pins, nails or staples through one object or piece of material into another. Excludes STAPLER (as modified).
What is a Bearing And Bushing Inserter? 290 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 207 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 939 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 14 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 93 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 161 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 94 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 141 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 53 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Six Point Tip Screwdriver? 155 Items: A Six Point Tip Screwdriver (SCREWDRIVER,SIX POINT TIP) is a manual screwdriver having a single nonremoveable blade having a tip with six rounded points.
What is a Seal Inserter And Remover? 147 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 478 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is a Preformed Packing Inserter And Remover? 34 Items: A Preformed Packing Inserter And Remover (INSERTER AND REMOVER,PREFORMED PACKING) is a hand tool designed to install and remove a PACKING, PREFORMED.
What is a Pin Remover? 34 Items: A Pin Remover (REMOVER,PIN) is a hand tool designed to facilitate the removal of a pin from a hole.
What is a Pin Inserter And Remover? 13 Items: A Pin Inserter And Remover (INSERTER AND REMOVER,PIN) is a rodlike tool designed to facilitate the insertion and removal of a pin from a hole.
What is an Electrical Contact Inserter And Remover? 37 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Piston Inserter? 40 Items: A Piston Inserter (INSERTER,PISTON) is a tool designed to permit installation of a piston or piston assembly without damaging the packings or piston.
What is a Spring Inserter And Remover? 85 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 13 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Stud Inserter? 22 Items: A Stud Inserter (INSERTER,STUD) is a device designed to drive in studs. It does not have any facilities for removing or extracting studs. See also INSERTER AND REMOVER, STUD.
What is a Stud Inserter And Remover? 17 Items: A Stud Inserter And Remover (INSERTER AND REMOVER,STUD) is a group of items designed to extract and to drive studs. It may include collets, guides, housings, holders and the like. See also REMOVER SET, STUD and INSERTER, STUD.
What is a Gear Inserter? 54 Items: A Gear Inserter (INSERTER,GEAR) is a hand tool designed to install various gears onto a gearshaft. It may be operated by a pushing or a striking force.
What is a Crimping Tool Die? 73 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is an Electrical Connector Inserter? 45 Items: An Electrical Connector Inserter (INSERTER,ELECTRICAL CONNECTOR) is a hand tool designed to hold an electrical connector, and to assist in the positioning and installation of the connector on a cover, panel or the like.
What is a Float? 12 Items: A Float is a tool used for concrete, plastering and grouting work.
What is a Mechanical Puller Set? 19 Items: A Mechanical Puller Set (PULLER SET,MECHANICAL) is two or more separate PULLER, MECHANICAL of different fixed sizes.
What is a Lifting Pneumatic Bag? 11 Items: A Lifting Pneumatic Bag (PNEUMATIC BAG,LIFTING) is a device made of flexible material designed to lift another item by being placed under the item and being inflated with air or some other gas. It will have a means of being connected to an air or gas source and may include a connector hose, a control valve and/or a pressure regulator.
What is a Cable Tie Installation Tool? 22 Items: A Cable Tie Installation Tool (INSTALLATION TOOL,CABLE TIE) is a lightweight, hand-held, hand-operated tool designed to fasten cable ties, straps and the like. Cable tie is inserted into the nose of the tool flush to the cable tie head. Trigger handle tightens cable tie and cuts off any excess. These installation tools are available in a variety of sizes depending on their intended use with miniature, intermediate, standard, heavy or extra heavy cross section ties.
What is a Bearing Staking Installation Tool? 159 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
Wrench Set,Ratchet 15 Items
What is a Sealant Dispenser? 26 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Retaining Ring Pliers Set? 10 Items: A Retaining Ring Pliers Set (PLIERS SET,RETAINING RING) is a group of PLIERS, RETAINING RING having different characteristics.
What is a Hand Armament Subsystem Carrier? 52 Items: A Hand Armament Subsystem Carrier (CARRIER,ARMAMENT SUBSYSTEM,HAND) is a metallic item with a clamp device and/or space for depositing articles. It is used for transporting weapon parts during maintanence and/or repair work, such as gun barrel, automatic loader, breechblock and the like.
What is a Ring Retaining Pliers Tip Set? 13 Items: A Ring Retaining Pliers Tip Set (TIP SET,PLIERS,RING RETAINING) is a collection of removable metallic tips in matched pairs used to provide various size capablities to PLIERS, RING RETAINING which permits the removal and installation of internal and external retaining rings.
What is a Plug Electrical Connector Extractor? 45 Items: A Plug Electrical Connector Extractor (EXTRACTOR,ELECTRICAL CONNECTOR,PLUG) is a hand tool designed to disassemble CONNECTOR, PLUG, ELECTRICAL from a CONNECTOR, RECEPTACLE, ELECTRICAL.
What is a Torque Wrench Adapter Set? 10 Items: A Torque Wrench Adapter Set (ADAPTER SET,TORQUE WRENCH) is tWO or more ADAPTER, TORQUE WRENCH of different sizes.
What is an Electronic Component Inserter And Remover? 79 Items: An Electronic Component Inserter And Remover (INSERTER AND REMOVER,ELECTRONIC COMPONENT) is an item which can insert or remove an electronic component package such as MICROCIRCUIT; RESISTOR, NETWORK (as modified); and the like from its mounting position or socket. Excludes INSERTER AND REMOVER, ELECTRICAL CONTACT; REMOVER, ELECTRICAL CONTACT; EXTRACTOR, ELECTRICAL CARD; EXTRACTOR, ELECTRONIC CRYSTAL UNIT; EXTRACTOR, ELECTRON TUBE.
What is an Impact Type Bit Set And Handle Screwdriver? 14 Items: An Impact Type Bit Set And Handle Screwdriver (SCREWDRIVER,BIT SET AND HANDLE,IMPACT TYPE) is an item consisting of a set of screwdriver bits and a impact driver to accommodate the bits of various types and characteristics. It is designed to transmit a strong rotating movement by the impact of a hammer blowed on the impact driver. It is used to loosen rusted or seized screws. Excludes SCREWDRIVER, BIT SET AND HANDLE.
What is a Hand Vise Jaw? 19 Items: A Hand Vise Jaw (JAW,VISE,HAND) is an item consisting of two opposing parts of a VISE, HAND. The item is moveable and able to open and close. It can hold, grasp or clamp work.
What is a Screwdriver Handle? 28 Items: A Screwdriver Handle (HANDLE,SCREWDRIVER) is an item used to accommodate various types of BIT, SCREWDRIVER. It is designed to rotate a bit that is used for installing or removing screws.
What is a Wire Twister Pliers? 25 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 284 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is a Mechanical Puller Body? 45 Items: A Mechanical Puller Body (BODY,PULLER,MECHANICAL) is an item designed to support and enclose the internal parts of a PULLER,MECHANICAL.
What is a Flat Tip And Cross Tip Screwdriver Set? 39 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is a Socket Wrench Screwdriver Attachment Set? 22 Items: A Socket Wrench Screwdriver Attachment Set (SCREWDRIVER ATTACHMENT SET,SOCKET WRENCH) is a set of screwdriver attachment, socket wrench of different sizes. Items consist of a female square drive on one end to attach to a handle, socket wrench and various screwdriver tip configurations on the opposite end. Excludes SCREWDRIVER ATTACHMENT,SOCKET WRENCH
What is an Oil Filter Wrench? 44 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 430 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Communications Equipment Spring Adjuster? 13 Items: A Communications Equipment Spring Adjuster (ADJUSTER,SPRING,COMMUNICATIONS EQUIPMENT) is a single or double end tool, equipped with slot(s) of various dimensions or with cylindrical rod(s), used for adjusting the springs or spring tensioned parts of electronic equipment.
What is a Rotating Members Aligning Tool? 32 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
What is a Final Drive Assembly Alignment Pin? 41 Items: A Final Drive Assembly Alignment Pin (ALIGNMENT PIN,FINAL DRIVE ASSEMBLY) is a special designed pin used in the assembling of the final drive.
Arm,Handling Tool 77 Items
What is a Splicing Sleeve Compressing Tool? 23 Items: A Splicing Sleeve Compressing Tool (COMPRESSING TOOL,SPLICING SLEEVE) is a hand tool having hinged leverage handles similar to a CUTTER, BOLT or pliers, designed to compress a splicing sleeve when joining the ends of two conductors, or when forming an eye splice in the end of a wire rope. Excludes CRIMPING TOOL, TERMINAL, HAND.
What is a Hand Screw Jack Extension? 14 Items: A Hand Screw Jack Extension (EXTENSION,HAND SCREW JACK) is a length of externally threaded rigid shafting which is the adjustable section of a JACK, SCREW, HAND.
What is a Mechanical Puller Gear Adapter? 21 Items: A Mechanical Puller Gear Adapter (GEAR ADAPTER,PULLER,MECHANICAL) is an adapter that adapts a PULLER,MECHANICAL, to pull a certain gear.
Handle,Hydraulic Jack 18 Items
What is a Female Electrical Contact Resizing Tool? 11 Items: A Female Electrical Contact Resizing Tool (RESIZING TOOL,FEMALE ELECTRICAL CONTACT) is a tool designed to shape to a specific size, female contacts such as those used on electrical connectors, tube sockets, crystal sockets, and pin jacks.
What is a Screwdriver And Socket Wrench Combination? 13 Items: A Screwdriver And Socket Wrench Combination is a hand-tool formed into an integral unit with a socket wrench at one end and a screwdriver bit at the other end. See also SCREWDRIVER AND WRENCH ASSEMBLY.
What is a Hand Hose Fitting Swaging Tool Kit? 11 Items: A Hand Hose Fitting Swaging Tool Kit (SWAGING TOOL KIT,HOSE FITTING,HAND) is a device, hydraulically actuated by hand or power operated pump, consisting of face plate, adapter plate, finger cages, fingers, ram, bushing, and expanding mandrels combined on a single base in various functional arrangements. It is used for swaging the outside diameter of hose assembly fittings, expanding the inside diameter of hose assemblies, and securing the fabrication of hose assemblies. Included are a hand or power operated pump, lubricant, cases, and trays.
What is a Catch Lever Tool? 12 Items: A Catch Lever Tool (LEVER TOOL,CATCH) is a specially designed hand tool which engages the opening and closing lever of a CATCH (as modified) for ease of operation. It is constructed of thin rigid material, usually flat, and one end has an engaging tongue.
What is a Manual Impact Wrench? 11 Items: A Manual Impact Wrench (WRENCH,IMPACT,MANUAL) is a manually operated handheld tool consisting of spring-loaded handle and a power-impact head which delivers a torsional impact from either continuous movement of the handle in one direction, or by a reciprocating action. It is used in tightening and loosening fasteners, such as bolts, nuts, and the like. The item may include sockets, extensions and offset fittings, nut runners, and the like.
What is a Drift? 63 Items: A Drift is an item consisting of a tubular body fitted with replaceable tips. It is designed to insert or remove mechanical components where space is restricted.
What is a Nutdriver? 46 Items: A Nutdriver is a non-powered hand tool with a screwdriver style handle, shaft and formed female hex or square socket at driving end.
What is a Locking Device Removal Tool? 12 Items: A Locking Device Removal Tool (REMOVAL TOOL,LOCKING DEVICE) is a hand tool designed to facilitate the removal of a WASHER, KEY and a LOCKING PLATE, NUT AND BOLT.
What is a Hydraulic Fitting Crimping Tool Head? 26 Items: A Hydraulic Fitting Crimping Tool Head (HEAD,CRIMPING TOOL,HYDRAULIC FITTING) is a component of a crimping tool used to compress fittings on fluid tubes. It consists of a U-shape item, in which, are mounted different sizes of DIE, CRIMPING TOOL for tubes of various diameters.
What is a Torque Screwdriver? 11 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.
What is a Special Purpose Combination Wrench? 13 Items: A Special Purpose Combination Wrench (WRENCH,COMBINATION,SPECIAL PURPOSE) is a tool having a combination of ends and facets. The ends may have open end, box or spanner characteristics. The sides may have features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s). Designed to fit specific items, not sized as standard or metric.
What is a Screwdriver Bit Holder? 56 Items: A Screwdriver Bit Holder (HOLDER,SCREWDRIVER BIT) is an attachment with a socket end for accepting male hexagon shank insert bits and a drive end for adapting to a portable power or hand tool.
What is a Telescoping Pole? 16 Items: A Telescoping Pole (POLE,TELESCOPING) is an item which is designed to be extended or compressed by the sliding of overlapping sections. This item may or may not be able to accommodate an extension.

Stock Items From Supply Class 5120 Page 38 of 110

5120-14-487-5289
Spanner Wrench

144875289
62AM027: RNCC: 3 | RNVC: 2

10 Apr 1997

5120-14-463-3694
Seal Inserter And Remover

144633694
16380228: RNCC: 3 | RNVC: 2
16380228: RNCC: 5 | RNVC: 9

9 Jun 1993

5120-14-504-1641
Pliers

145041641
6956556: RNCC: 3 | RNVC: 2
1122415M00: RNCC: 5 | RNVC: 2
6956556: RNCC: 5 | RNVC: 2

11 Feb 1998

5120-14-539-2602
Mechanical Puller Body

145392602
T631G3001221: RNCC: 3 | RNVC: 2

17 Dec 2003

5120-14-247-2137
Spanner Wrench

142472137
1811T: RNCC: 3 | RNVC: 2
MR3687: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-363-4642
Open End Wrench

143634642
W732M: RNCC: 3 | RNVC: 9

9 May 1980

5120-14-424-9827
Wrench Extension Handle

144249827
M4HZ7101941901: RNCC: 3 | RNVC: 2

16 Jun 1988

5120-14-459-1635
Bearing Staking Installation Tool

144591635
45215114: RNCC: 3 | RNVC: 2
45215114: RNCC: 5 | RNVC: 9

19 Nov 1992

5120-14-370-9408
Mechanical Puller Attachment

143709408
16798266: RNCC: 3 | RNVC: 2
16798266: RNCC: 3 | RNVC: 9

5 Jun 1981

5120-14-490-6992
Wrench

144906992
241 W 02841 000: RNCC: 3 | RNVC: 2
F300 0T 000 1179: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-469-9278
Mechanical Puller Attachment

144699278
16849248: RNCC: 3 | RNVC: 2
16849248: RNCC: 5 | RNVC: 9

18 May 1994

5120-14-304-7909
Hand Blind Riveter

143047909
TYPEBH: RNCC: 3 | RNVC: 2
BHAP0LL0N: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-538-4665
Spanner Wrench

145384665
NGM0010037723515: RNCC: 2 | RNVC: 2

9 Dec 2003

5120-14-538-8999
Bearing And Bushing Inserter And Remover

145388999
NGM0023075031028: RNCC: 2 | RNVC: 2

9 Dec 2003

5120-14-486-5675
Montage

144865675
RT21776: RNCC: 3 | RNVC: 2

25 Mar 1997

5120-14-361-7501
Spanner Wrench

143617501
0UT33: RNCC: 3 | RNVC: 2

20 Feb 1980

5120-14-334-0436

5120-14-346-1681
Spanner Wrench

143461681
D1512-2216B: RNCC: 3 | RNVC: 2
D1512-2216: RNCC: 5 | RNVC: 2
D1512-2216: RNCC: 5 | RNVC: 9

12 Dec 1977

5120-14-357-8265
Retaining Ring Pliers

143578265
07614-0040100: RNCC: 3 | RNVC: 2
07614-0040100: RNCC: 5 | RNVC: 2

20 Jul 1979

144932101
5000261153: RNCC: 3 | RNVC: 2
F300 0T 011 3479: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-371-4879
Cle Electro-Valves

143714879
205401: RNCC: 3 | RNVC: 2

5 Aug 1981

5120-14-395-0761
Dexpansion Cone

143950761
H46675: RNCC: 3 | RNVC: 2

2 Oct 1984

5120-14-425-9254
Mandrin Emmanchemen

144259254
600108: RNCC: 3 | RNVC: 2

28 Jul 1988

5120-14-262-9299
Cle Speciale

142629299
NO PRIMARY REF14-262-9299: RNCC: 3 | RNVC: 2
144H210: RNCC: 5 | RNVC: 9

1 Jan 1970

5120-14-250-1738
Spanner Wrench

142501738
NO PRIMARY REF14-250-1738: RNCC: 3 | RNVC: 2
B4C317644: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-222-1419
Sheet Metalworking Dolly Block

142221419
306-120X48: RNCC: 3 | RNVC: 2
M0B306: RNCC: 5 | RNVC: 2
MOB306: RNCC: 5 | RNVC: 2

1 Jan 1966

5120-14-359-9392
Wrench Kit

143599392
J01037-09-1130: RNCC: 3 | RNVC: 2

15 Oct 1979

5120-14-427-1465
Pliers

144271465
6254-59600: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-514-7325
Cross Tip Screwdriver

145147325
ENFD6568-2X125: RNCC: 3 | RNVC: 2

11 Jun 1999

5120-14-254-0603
Socket Wrench Adapter-Extension

142540603
GSM196-021REP8F9: RNCC: 3 | RNVC: 2
GSM196-021REP8: RNCC: 5 | RNVC: 2

1 Jan 1969

5120-14-294-6173
Socket Wrench Screwdriver Attachment

142946173
RT.7: RNCC: 3 | RNVC: 2
3148515141805: RNCC: 5 | RNVC: 2
TVA5120-2-263-037-1.1.7: RNCC: 5 | RNVC: 2
RT7: RNCC: 5 | RNVC: 2
0514180: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-485-6940
Seal Inserter And Remover

144856940
853-203-228-0: RNCC: 3 | RNVC: 2

6 Feb 1997

5120-14-445-0115
Sheet Metalworking Stake

144450115
853-930-121-0: RNCC: 3 | RNVC: 2

31 Jan 1991

5120-14-438-3947
Retaining Ring Installation Tool

144383947
0179623: RNCC: 3 | RNVC: 2

20 Mar 1990

5120-14-456-8218
Bearing And Bushing Inserter And Remover

144568218
45057819: RNCC: 3 | RNVC: 2
45057819: RNCC: 5 | RNVC: 9

24 Jul 1992

5120-14-204-9183

5120-14-497-8717
Cable

144978717
F300 0T 022 9500: RNCC: 3 | RNVC: 2
45525734: RNCC: 5 | RNVC: 2

22 Oct 1997

5120-14-427-0925
Formage Tas

144270925
540314: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-545-5452
Spanner Wrench

145455452
61028845AA: RNCC: 3 | RNVC: 2

19 Apr 2005

5120-14-260-2913
Bloc De Pre-Sertiss

142602913
RMPS5F20X1M: RNCC: 3 | RNVC: 2
RMPS4F18X20M: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-572-3630
Screwdriver Bit

145723630
EXP.110: RNCC: 3 | RNVC: 2
3148517846937: RNCC: 5 | RNVC: 2
784693: RNCC: 5 | RNVC: 2
0784693: RNCC: 5 | RNVC: 9

28 Jun 2012

5120-14-555-1144
Face Spanner Wrench Socket

145551144
82167436000: RNCC: 3 | RNVC: 2
82167442: RNCC: 5 | RNVC: 2

2 Oct 2007

5120-14-462-9072
Spring Inserter And Remover

144629072
45056343: RNCC: 3 | RNVC: 2
45056343: RNCC: 5 | RNVC: 9

5 May 1993

5120-14-335-1473
Pliers

143351473
E10242PL1AREP35: RNCC: 3 | RNVC: 2

3 Jun 1976

5120-14-407-2042
Bearing And Bushing Inserter

144072042
100768: RNCC: 3 | RNVC: 2

12 Feb 1986

5120-14-432-8857
Open End Wrench

144328857
M4Z7101943220: RNCC: 3 | RNVC: 2

28 Jun 1989

5120-14-299-2986
Drift

142992986
28645: RNCC: 3 | RNVC: 2
28645: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-283-4942
Spanner Wrench

142834942
306985: RNCC: 3 | RNVC: 2
306985: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-525-2978
Torque Wrench Adapter

145252978
13.18: RNCC: 3 | RNVC: 2

23 May 2001

5120-14-541-3759
Socket Head Screw Key

145413759
344161540: RNCC: 3 | RNVC: 2

3 Jun 2004

5120-14-516-8006
Poussoir

145168006
5001008741: RNCC: 3 | RNVC: 2

18 Oct 1999

5120-14-417-4052
Socket Wrench Socket

144174052
26145026000: RNCC: 3 | RNVC: 2
261450260: RNCC: 5 | RNVC: 9

8 Jul 1987

5120-14-568-8335
Seal Inserter

145688335
888-567-100-1: RNCC: 3 | RNVC: 2

8 Jul 2011

5120-14-316-7193
Positionn Pour Pinc

143167193
11-7777-1: RNCC: 3 | RNVC: 2
11-7777-1: RNCC: 5 | RNVC: 1
85-684-7452: RNCC: 6 | RNVC: 9

1 Jan 1975

5120-14-316-5637
Outil Emmanch Axe

143165637
3210-97-31-390-1: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-272-4220
Dispositif De Bloca

142724220
NO PRIMARY REF14-272-4220: RNCC: 3 | RNVC: 1
VTR200-1070-10701-10704-10709-1-: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-234-3917
Arrache Roulement C

142343917
NO PRIMARY REF14-234-3917: RNCC: 3 | RNVC: 2
12C8025: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-511-6683
Open End Wrench

145116683
NNP5120878750725: RNCC: 3 | RNVC: 2

8 Jan 1999

5120-14-370-3294
Mechanical Puller Attachment

143703294
5000502215: RNCC: 3 | RNVC: 2
5000265030: RNCC: 3 | RNVC: 2
5000502215: RNCC: 5 | RNVC: 9

18 May 1981

5120-14-490-8792
Tournev

144908792
4065 200 000 685: RNCC: 3 | RNVC: 2
F300 0T 000 5062: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-383-0602
Jet Demmanchement

143830602
F47194: RNCC: 3 | RNVC: 2

17 Mar 1983

5120-14-490-8973
Chasse

144908973
4067 920 002 112: RNCC: 3 | RNVC: 2
F300 0T 000 5266: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-567-4649
Face Spanner Wrench Socket

145674649
8819683000: RNCC: 3 | RNVC: 2

17 Mar 2011

5120-14-233-6943

5120-14-489-7911
Socket Wrench Socket

144897911
R.1/2LA: RNCC: 3 | RNVC: 2
3148510516851: RNCC: 5 | RNVC: 2
0051685: RNCC: 5 | RNVC: 9

19 Aug 1997

5120-14-233-4390

5120-14-427-6482
Socket Head Screw Key

144276482
NO PRIMARY REF14-427-6482: RNCC: 3 | RNVC: 2
E0949602: RNCC: 5 | RNVC: 9

27 Oct 1988

5120-14-449-6825
Spanner Wrench

144496825
OUT-26MS17: RNCC: 3 | RNVC: 2

2 Sep 1991

5120-14-564-9241
Seal Inserter

145649241
885557: RNCC: 3 | RNVC: 2

17 Jun 2010

5120-14-352-0247
Tube Packing Ring Installing Tool

143520247
330A98-2156-01: RNCC: 3 | RNVC: 2

16 Oct 1978

5120-14-260-3446
Outillage De Mise E

142603446
NO PRIMARY REF14-260-3446: RNCC: 3 | RNVC: 2
RT8502: RNCC: 5 | RNVC: 9

1 Jan 1970

5120-14-314-9154
Screwdriver Bit

143149154
M2-035: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-392-4541
Dajustement Outil

143924541
7244-431: RNCC: 3 | RNVC: 9
ROT7244-431: RNCC: 5 | RNVC: 9

21 Mar 1984

5120-14-542-9390
Retaining Ring Pliers

145429390
8430004: RNCC: 3 | RNVC: 2
8430004: RNCC: 5 | RNVC: 2

14 Aug 2004

5120-14-370-9625

5120-14-217-9966

5120-14-518-8974
Socket Wrench Adapter

145188974
54000: RNCC: 3 | RNVC: 2

25 Feb 2000

5120-14-463-7652
Manchon

144637652
428376R: RNCC: 3 | RNVC: 2
M17400: RNCC: 5 | RNVC: 2

29 Jun 1993

5120-14-281-3275

5120-14-238-5435

5120-14-300-1553

5120-14-449-5761
Outil Monte Dem Pal

144495761
75145913400: RNCC: 3 | RNVC: 2
026098: RNCC: 5 | RNVC: 1

27 Aug 1991

5120-14-425-6005
Casse-Ecrou

144256005
289.30: RNCC: 3 | RNVC: 2
3148511662847: RNCC: 5 | RNVC: 2
0166284: RNCC: 5 | RNVC: 9

12 Jul 1988

5120-14-263-2681

5120-14-285-7722
Open End Wrench

142857722
RT11210: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-541-7062
Combination Box And Open End Wrench

145417062
40R.21: RNCC: 3 | RNVC: 2
40R.21: RNCC: 5 | RNVC: 2
3148511011935: RNCC: 5 | RNVC: 2

22 Jun 2004

5120-14-401-2645
Spanner Wrench

144012645
132061: RNCC: 3 | RNVC: 2

5 Jun 1985

5120-14-551-0054
Spanner Wrench

145510054
F47659: RNCC: 3 | RNVC: 2

18 Aug 2006

5120-14-384-6308
Electrical Card Extractor

143846308
16928960: RNCC: 3 | RNVC: 2
16928960: RNCC: 5 | RNVC: 9

2 Jun 1983

5120-14-437-2114
Spanner Wrench

144372114
0490-210008: RNCC: 3 | RNVC: 2

23 Jan 1990

5120-14-421-6296
Open End Wrench

144216296
210014: RNCC: 3 | RNVC: 2

20 Jan 1988

5120-14-545-9181
Socket Head Screw Key Blade

145459181
61369520: RNCC: 3 | RNVC: 2

27 May 2005

5120-14-397-8662
Socket Wrench Socket

143978662
005655210P: RNCC: 3 | RNVC: 2

31 Jan 1985

5120-14-566-1167
Hand Screw Jack

145661167
F00364300: RNCC: 3 | RNVC: 2

20 Oct 2010

5120-14-393-4931
Extracteur De Joint

143934931
76545900900: RNCC: 3 | RNVC: 2
265458028: RNCC: 5 | RNVC: 2
26545802800: RNCC: 5 | RNVC: 2
765459009: RNCC: 5 | RNVC: 2
N562290: RNCC: 5 | RNVC: 2
765459009: RNCC: 5 | RNVC: 9

7 Apr 1984

5120-14-265-6058
Jeu Embout Pour Cle

142656058
S974: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-282-9273

5120-14-422-3343

5120-14-226-6560

5120-14-488-6855
Tige Levage Bride

144886855
287078588: RNCC: 3 | RNVC: 2
F300 0T 018 9349: RNCC: 6 | RNVC: 9

28 May 1997

5120-14-288-6974
Bague De Montage

142886974
D1553-4819: RNCC: 3 | RNVC: 2
D1553-4819: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-497-8711
Cable

144978711
F300 0T 022 9446: RNCC: 3 | RNVC: 2
45525686: RNCC: 5 | RNVC: 2

22 Oct 1997

5120-14-365-8395

5120-14-250-1263

5120-14-417-9881
Premontage Bloc

144179881
VOMO12SX: RNCC: 3 | RNVC: 2
VOMO12SX: RNCC: 3 | RNVC: 9
V0M012S: RNCC: 5 | RNVC: 2
101742: RNCC: 5 | RNVC: 2
V0M012S: RNCC: 5 | RNVC: 9

6 Aug 1987

5120-14-563-8875
Ratchet Wrench Set

145638875
65.JU6T: RNCC: 3 | RNVC: 2
784597: RNCC: 5 | RNVC: 2

24 Mar 2010

5120-14-472-0964
De Serrag Outillage

144720964
8814630000: RNCC: 3 | RNVC: 2

5 Oct 1994

5120-14-490-9886
Cle Pne

144909886
4472 567 112 201: RNCC: 3 | RNVC: 2
F300 0T 000 8600: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-367-6225
Spanner Wrench

143676225
106PAA: RNCC: 3 | RNVC: 2

19 Jan 1981

5120-14-459-1622
Bearing And Bushing Remover

144591622
45056173: RNCC: 3 | RNVC: 2
45056173: RNCC: 5 | RNVC: 9

19 Nov 1992

5120-14-358-3625
Open End Wrench

143583625
522CM8X9: RNCC: 3 | RNVC: 9
DEM522CM8X9: RNCC: 5 | RNVC: 9

13 Aug 1979

5120-14-539-2637
Mechanical Puller Body

145392637
T632G3012221: RNCC: 3 | RNVC: 2

17 Dec 2003

5120-14-425-6818
Adaptateur Cannele

144256818
8812116000: RNCC: 3 | RNVC: 2

21 Jul 1988

5120-14-268-0068
Spanner Wrench

142680068
DE48H5: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-369-9386
Socket Wrench Adapter

143699386
004339005P: RNCC: 3 | RNVC: 2

18 May 1981

5120-14-350-0286
Mechanical Puller Attachment

143500286
3130S98-04-703-1: RNCC: 3 | RNVC: 2

14 Jun 1978

5120-14-515-9362
Flat Tip Screwdriver

145159362
AZ.6,5X150: RNCC: 3 | RNVC: 2
0013395: RNCC: 5 | RNVC: 2
3148510133959: RNCC: 5 | RNVC: 2
AZ-6,5X150: RNCC: 5 | RNVC: 2
1092008C00: RNCC: 5 | RNVC: 2

26 Aug 1999

5120-14-345-4100
Spanner Wrench

143454100
010-30-10-01: RNCC: 3 | RNVC: 9

5 Oct 1977

5120-14-404-1167
Freinage Outil

144041167
10-107: RNCC: 3 | RNVC: 2
C2M-99-10-107: RNCC: 3 | RNVC: 2

11 Sep 1985

5120-14-263-8204

5120-14-322-0657
Spanner Wrench

143220657
001559010P: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-488-3125
Socket Head Screw Key

144883125
83H.050: RNCC: 3 | RNVC: 2
83H050: RNCC: 5 | RNVC: 2
0124381: RNCC: 5 | RNVC: 2
3148511243817: RNCC: 5 | RNVC: 2
83H.050: RNCC: 5 | RNVC: 2

30 Apr 1997

5120-14-491-0195
Injecte

144910195
4602 009 500 002: RNCC: 3 | RNVC: 2
F300 0T 001 0988: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-257-4391

5120-14-214-3095
Cle Speciale

142143095
RT20721: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-516-8033
Poussoir

145168033
5001008708: RNCC: 3 | RNVC: 2

18 Oct 1999

5120-14-399-9169
Valve Outillage

143999169
F52218: RNCC: 3 | RNVC: 2

24 Apr 1985

144955436
NO PRIMARY REF14-495-5436: RNCC: 3 | RNVC: 2
420 277 810: RNCC: 5 | RNVC: 9
F300 0T 019 4442: RNCC: 6 | RNVC: 9

15 Oct 1997

5120-14-249-3945
Cle Speciale

142493945
3210-96-31-010: RNCC: 3 | RNVC: 2
08-346: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-296-8691

5120-14-572-7687
Combination Box And Open End Wrench Set

145727687
440.JE18: RNCC: 3 | RNVC: 2
3148518003582: RNCC: 5 | RNVC: 2
800358: RNCC: 5 | RNVC: 2

31 Jul 2012

5120-14-218-9636

5120-14-201-8780
Open End Wrench

142018780
44S9X12: RNCC: 3 | RNVC: 2
10NC9X12: RNCC: 3 | RNVC: 2
10-9X12C: RNCC: 5 | RNVC: 2
13L9X12: RNCC: 5 | RNVC: 9

1 Jan 1962

5120-14-366-2041
Remontage Outillage

143662041
96-21-11-161-00: RNCC: 3 | RNVC: 2
85-100-5010: RNCC: 6 | RNVC: 9

4 Nov 1980

5120-14-452-5371
Face Spanner Wrench Socket

144525371
NO PRIMARY REF14-452-5371: RNCC: 3 | RNVC: 2
BLB81: RNCC: 5 | RNVC: 9
85-694-5623: RNCC: 6 | RNVC: 9

8 Jan 1992

5120-14-515-1455
Open End Wrench

145151455
452-65242-122: RNCC: 3 | RNVC: 2

7 Jul 1999

5120-14-570-7634
Flat Tip Screwdriver

145707634
TB-65M150: RNCC: 3 | RNVC: 2

23 Jan 2012

5120-14-217-2663

5120-14-281-2975
Cle Plate Piston Co

142812975
C46919: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-468-4222
Obturateur Tete Hf

144684222
45580518: RNCC: 3 | RNVC: 2

28 Feb 1994

5120-14-490-2036
Pliers

144902036
CP0U6113: RNCC: 3 | RNVC: 2
5120AA2029128: RNCC: 6 | RNVC: 9

17 Sep 1997

5120-14-271-6128

5120-14-331-6067

5120-14-458-8861
Douille

144588861
M35249: RNCC: 3 | RNVC: 2

5 Nov 1992

5120-14-397-9777

5120-14-370-6398

5120-14-456-8223
Bearing And Bushing Remover

144568223
45057951: RNCC: 3 | RNVC: 2
45057951: RNCC: 5 | RNVC: 9

24 Jul 1992

5120-14-508-6039
Open End Wrench

145086039
8006555Q00: RNCC: 3 | RNVC: 2

22 Sep 1998

5120-14-523-5441
Hand Hose Fitting Swaging Tool Kit

145235441
DLTFRPSKT3101: RNCC: 3 | RNVC: 2

24 Jan 2001

5120-14-517-9778
Spanner Wrench

145179778
TC3122G001: RNCC: 3 | RNVC: 2

19 Jan 2000

5120-14-356-1753
Spanner Wrench

143561753
S3Z59593914: RNCC: 3 | RNVC: 2

25 Apr 1979

5120-14-291-3030
Bearing And Bushing Inserter And Remover

142913030
174806: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-449-4444
Socket Wrench Adapter

144494444
NS.230: RNCC: 3 | RNVC: 2
3148510433004: RNCC: 5 | RNVC: 2
0043300: RNCC: 5 | RNVC: 9

19 Aug 1991

5120-14-286-7805
Screw Thread Insert Inserter

142867805
01500518000: RNCC: 3 | RNVC: 2
32081840: RNCC: 5 | RNVC: 2
32241840: RNCC: 5 | RNVC: 2
32071840: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-553-5307
Spanner Wrench

145535307
61462396AA: RNCC: 3 | RNVC: 2

12 Apr 2007

5120-14-410-3465
Special Tournevis

144103465
8814142000: RNCC: 3 | RNVC: 2

18 Jun 1986

5120-14-264-9576
Spanner Wrench

142649576
0288-78: RNCC: 3 | RNVC: 2
RA288: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-366-9420
Fixations Enclume

143669420
2089: RNCC: 3 | RNVC: 2

11 Dec 1980

5120-14-253-3685
Levier Pour Palier

142533685
410233M6: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-468-9754
Tournevis Special

144689754
861140: RNCC: 3 | RNVC: 2
F300 0T 015 0598: RNCC: 5 | RNVC: 9

30 Mar 1994

5120-14-490-8786
Tournev

144908786
4065 200 000 663: RNCC: 3 | RNVC: 2
F300 0T 000 5056: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-298-4756

5120-14-214-2914
Cle A Rotule Specia

142142914
8584: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-544-2370
Open End Wrench

145442370
MAI 500 123-2: RNCC: 3 | RNVC: 2

12 Jan 2005

5120-14-224-8041
Open End Wrench

142248041
13-5-16X11-32: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-423-2218
Basculeur Cle Dyn

144232218
0747129: RNCC: 3 | RNVC: 2
SP.1734 D-3-710: RNCC: 5 | RNVC: 2
SP1734D-3-710: RNCC: 5 | RNVC: 2

13 Apr 1988

5120-14-365-0190
Socket Wrench Socket

143650190
S.31/32H: RNCC: 3 | RNVC: 2
3148510550602: RNCC: 5 | RNVC: 2
S31-32H: RNCC: 5 | RNVC: 2
0055060: RNCC: 5 | RNVC: 9

2 Sep 1980

5120-14-377-2311
Extracteur Injecteu

143772311
5000262208: RNCC: 3 | RNVC: 2
5000262208: RNCC: 5 | RNVC: 9

17 May 1982

5120-14-222-1411

5120-14-042-5677
Outi Extrac Manchon

140425677
8522-2921: RNCC: 3 | RNVC: 2

22 May 1978

5120-14-423-4297
Spanner Wrench

144234297
8690-00-1: RNCC: 3 | RNVC: 2

19 Apr 1988

5120-14-282-9220
Socket Wrench Adapter

142829220
M230: RNCC: 3 | RNVC: 2
0032665: RNCC: 3 | RNVC: 2
M-230: RNCC: 3 | RNVC: 2
3272670277441: RNCC: 5 | RNVC: 2
M.230A: RNCC: 5 | RNVC: 2
79M230: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-040-4711
Mors

140404711
8500-1015: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-563-1776
Adjustable Wrench

145631776
113.24T: RNCC: 3 | RNVC: 2

12 Jan 2010

5120-14-457-5496
Corps

144575496
13119A: RNCC: 3 | RNVC: 2

10 Sep 1992

5120-14-459-3617
Molete Centreur

144593617
M53414: RNCC: 3 | RNVC: 2
M19831+M53414: RNCC: 5 | RNVC: 2

26 Nov 1992

5120-14-242-4634

5120-14-465-4699
Face Spanner Wrench Socket

144654699
851-500-143-0: RNCC: 3 | RNVC: 2

30 Sep 1993

5120-14-317-5644
Screwdriver Bit

143175644
I480-4: RNCC: 3 | RNVC: 2
I480-4: RNCC: 3 | RNVC: 2
XPB104-7: RNCC: 5 | RNVC: 9
1234: RNCC: 5 | RNVC: 9
85-069-1860: RNCC: 6 | RNVC: 9

1 Jan 1975

5120-14-270-6382
Spanner Wrench

142706382
17-9-1460: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-225-6489
Cle Ecrou De Cylind

142256489
DL6-10-2: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-297-5087
Collier Evasement

142975087
7062BA1C0LLIERT1-41-5: RNCC: 2 | RNVC: 2

1 Jan 1973

5120-14-528-7268
Spanner Wrench

145287268
815-1-99-121: RNCC: 3 | RNVC: 2

6 Feb 2002

5120-14-512-5606
Spanner Wrench

145125606
94AM032: RNCC: 3 | RNVC: 2

17 Feb 1999

5120-14-529-8670
Socket Head Screw Key Set

145298670
86H.JE7A: RNCC: 3 | RNVC: 2
3148511262504: RNCC: 5 | RNVC: 2

17 Apr 2002

5120-14-402-2378
Bouchon Guide

144022378
36111: RNCC: 3 | RNVC: 2

26 Jun 1985

5120-14-401-9610
Cle Speciale

144019610
20110663: RNCC: 3 | RNVC: 2

26 Jun 1985

5120-14-467-6738
Spanner Wrench

144676738
2000-7567: RNCC: 3 | RNVC: 2

21 Jan 1994

5120-14-277-0270
Rotating Members Aligning Tool

142770270
520135: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-326-9154
Face Spanner Wrench Socket

143269154
468723: RNCC: 3 | RNVC: 2
468723: RNCC: 5 | RNVC: 2
LMT468723: RNCC: 5 | RNVC: 2

2 Jul 1975

5120-14-242-0571
Spanner Wrench

142420571
DLT001957: RNCC: 3 | RNVC: 2
DLT01957: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-032-3516
Spanner Wrench

140323516
33156: RNCC: 3 | RNVC: 2

17 Feb 1983

5120-14-479-3613
Spanner Wrench

144793613
F067CLS: RNCC: 3 | RNVC: 2

10 Jan 1996

5120-14-238-7295

5120-14-576-6317
Mechanical Puller S

145766317
8812437001: RNCC: 3 | RNVC: 2

2 Jul 2013

5120-14-324-8880
Roulements Et Guide

143248880
0-41102-2: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-567-0641
Socket Wrench Socket Set

145670641
R2NANOPB: RNCC: 3 | RNVC: 2

3 Feb 2011

5120-14-204-9627

5120-14-535-5270
Hand Terminal Crimping Tool

145355270
946156-1: RNCC: 3 | RNVC: 2
946-156-1: RNCC: 5 | RNVC: 2

31 May 2003

5120-14-569-0318
Mechanical Puller

145690318
F27360000-1: RNCC: 3 | RNVC: 2
F27360000: RNCC: 3 | RNVC: 9
F27360000: RNCC: 5 | RNVC: 9

1 Aug 2011

5120-14-323-4410

5120-14-293-4983

5120-14-264-6355
Forgeron Poincon

5120-14-577-1590
Box Wrench

145771590
82726574000: RNCC: 3 | RNVC: 2

19 Aug 2013

5120-14-264-7893
Des Forgeron Etampe

5120-14-376-6315
Cross Tip Screwdriver

143766315
NO PRIMARY REF14-376-6315: RNCC: 3 | RNVC: 2
465-3-2: RNCC: 5 | RNVC: 9

28 Apr 1982

5120-14-402-7936
Spanner Wrench

144027936
3210-97-31-003-1: RNCC: 3 | RNVC: 2
85-692-9446: RNCC: 6 | RNVC: 9

19 Jul 1985

5120-14-391-2062
Socket Wrench Socket

143912062
K2 1/8: RNCC: 3 | RNVC: 2
C-2'1/8: RNCC: 3 | RNVC: 2
C2 1/8: RNCC: 3 | RNVC: 2
3272670292918: RNCC: 5 | RNVC: 2

1 Mar 1984

5120-14-479-0358
Torque Wrench Adapter

144790358
888-374-800-1: RNCC: 3 | RNVC: 2

6 Dec 1995

5120-14-270-6381
Socket Head Screw Key

142706381
17-9-1458: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-228-7210
Open End Wrench

142287210
11EC03-8X7-16: RNCC: 3 | RNVC: 2
44EC3-8X7-16: RNCC: 5 | RNVC: 2

1 Jan 1966

5120-14-490-8899
Crattoi

144908899
4067 180 000 475: RNCC: 3 | RNVC: 2
F300 0T 000 5172: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-563-1963
Catch Lever Tool

145631963
522352: RNCC: 3 | RNVC: 2

13 Jan 2010

5120-14-311-4973

5120-14-361-6615

5120-14-396-4127
Ob Etancheite Outil

143964127
6274-51018: RNCC: 3 | RNVC: 2
6274-2600020: RNCC: 5 | RNVC: 2

27 Nov 1984

5120-14-429-1487
Demmanchement Outil

144291487
540615: RNCC: 3 | RNVC: 2

11 Jan 1989

5120-14-384-4991
Outil Montage Chamb

143844991
M10650: RNCC: 3 | RNVC: 2

4 May 1983

5120-14-416-7627
Rondelle Dappui

144167627
540355: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-368-4621

5120-14-443-8024
Flasque Darret

144438024
D12501-040-07: RNCC: 3 | RNVC: 2

5 Dec 1990

5120-14-489-3172
Outil D'installatio

144893172
10077371: RNCC: 3 | RNVC: 2

9 Jul 1997

5120-14-500-9814
Handling Tool Arm

145009814
C69994200000: RNCC: 3 | RNVC: 2
F300 0T 025 0027: RNCC: 6 | RNVC: 9

29 Oct 1997

5120-14-254-2460

5120-14-249-9636

5120-14-468-5886
Screwdriver Bit

144685886
62-3-01E ACP20 128E238-00: RNCC: 3 | RNVC: 2
62-3-01E ACP20 128E238-00: RNCC: 5 | RNVC: 9

9 Mar 1994

5120-14-421-0785
Pince Cloche

144210785
6254-58478: RNCC: 3 | RNVC: 2

6 Jan 1988

5120-14-424-5939
Patte De Manutentio

144245939
E9284-5781-006: RNCC: 3 | RNVC: 2

2 Jun 1988

5120-14-250-8306

5120-14-490-8956
Fer

144908956
4067 520 000 384: RNCC: 3 | RNVC: 2
F300 0T 000 5237: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-266-7029

5120-14-563-6221
Spanner Wrench

145636221
541146: RNCC: 3 | RNVC: 2

1 Mar 2010

5120-14-558-7633
Screw Push-Pull Jack

145587633
UE2502: RNCC: 3 | RNVC: 2

3 Nov 2008

5120-14-226-2025

5120-14-316-6170

5120-14-491-7246
Masse

144917246
57551: RNCC: 3 | RNVC: 2
F300 0T 004 0872: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-259-4743

5120-14-398-0299
Mandrin-Poussoir

143980299
101888: RNCC: 3 | RNVC: 2

31 Jan 1985

5120-14-472-7180
Cle Femelle Triangu

144727180
AUT0401W00A: RNCC: 3 | RNVC: 2

9 Nov 1994

5120-14-352-3197
Outil De Controle

143523197
MJF356-22: RNCC: 3 | RNVC: 2
MJF356-22: RNCC: 5 | RNVC: 2

16 Oct 1978

5120-14-392-4527
Socket Head Screw Key

143924527
ZWZ110800: RNCC: 3 | RNVC: 9

21 Mar 1984

5120-14-237-3721
Spanner Wrench

142373721
H90R1024A: RNCC: 3 | RNVC: 2
530526: RNCC: 5 | RNVC: 2
H90R1024A: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-527-8647
Torque Wrench Adapter

145278647
E2C001230000103: RNCC: 3 | RNVC: 2

28 Nov 2001

5120-14-491-5999
Cle

144915999
NO PRIMARY REF14-491-5999: RNCC: 3 | RNVC: 2
324: RNCC: 5 | RNVC: 9
F300 0T 003 5754: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-286-7827

5120-14-220-7880
Open End Wrench

142207880
71-58: RNCC: 3 | RNVC: 2
V2-95-563: RNCC: 5 | RNVC: 2
RACC58: RNCC: 5 | RNVC: 2
10A58: RNCC: 5 | RNVC: 2
71-58: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-514-1189
Open End Wrench

145141189
ENFD29451-6X7: RNCC: 3 | RNVC: 2

27 Apr 1999

5120-14-317-7953
Roulement Outillage

143177953
NO PRIMARY REF14-317-7953: RNCC: 3 | RNVC: 2
800518-79: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-467-8920
Flat Tip Screwdriver

144678920
N0 PRIMARY REF14-467-8920: RNCC: 3 | RNVC: 2
ACH.5,5X150: RNCC: 5 | RNVC: 2
003952: RNCC: 5 | RNVC: 2
3148510039282: RNCC: 5 | RNVC: 2
ACH5-5X150: RNCC: 5 | RNVC: 2
1003510G00: RNCC: 5 | RNVC: 2
162-7505: RNCC: 5 | RNVC: 2
0613 335 520: RNCC: 5 | RNVC: 2
0003928: RNCC: 5 | RNVC: 9
FACOMACH.5,5X150: RNCC: 5 | RNVC: 9

2 Feb 1994

5120-14-379-4871
Raccord De Vidange

143794871
7M141R03: RNCC: 3 | RNVC: 2

1 Oct 1982

5120-14-325-4774

5120-14-041-5117

5120-14-395-1994

5120-14-413-0135
Extracteur Bride

144130135
20768388: RNCC: 3 | RNVC: 9

18 Nov 1986

5120-14-312-3567
Cle Verrou

143123567
M107196: RNCC: 3 | RNVC: 2
M107196: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-371-1976

5120-14-490-8966
Maillet

144908966
4067 770 002 292: RNCC: 3 | RNVC: 2
F300 0T 000 5254: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-226-0003

5120-14-294-0268

5120-14-390-5339
Cale Dappui

143905339
NO PRIMARY REF14-390-5339: RNCC: 3 | RNVC: 2
21C8111: RNCC: 5 | RNVC: 9

26 Jan 1984

5120-14-429-3012
Screw Thread Insert Inserter

144293012
01500136400: RNCC: 3 | RNVC: 2

11 Jan 1989

5120-14-447-3087
Spanner Wrench

144473087
M4Z7101962902: RNCC: 3 | RNVC: 2

15 May 1991

5120-14-476-3285
Retaining Ring Pliers

144763285
477.AS: RNCC: 3 | RNVC: 2

7 Jun 1995

5120-14-374-6785

5120-14-299-7275

5120-14-463-3290
Outil Immobilisatio

144633290
0000085400: RNCC: 3 | RNVC: 2

9 Jun 1993

5120-14-306-9021
Douille Pour Etau

143069021
8811290000: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-286-7850

5120-14-241-6088

5120-14-406-6211
Socket Wrench Crowfoot Attachment

144066211
853-100-189-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-266-5598

5120-14-371-8873
Outil Enfich Extrac

143718873
0UT88: RNCC: 3 | RNVC: 2

5 Aug 1981

5120-14-206-6458

5120-14-247-1238

5120-14-241-0263

5120-14-454-9406
Socket Head Screw Key

144549406
84E.1,5X35: RNCC: 3 | RNVC: 2
84E,1,5X35: RNCC: 5 | RNVC: 2
3148511254059: RNCC: 5 | RNVC: 2
243-910: RNCC: 5 | RNVC: 2
FACOM84E.1,5X35: RNCC: 5 | RNVC: 9
0125405: RNCC: 5 | RNVC: 9

29 Apr 1992

5120-14-262-4682
Hole Sheet Metal Holder

142624682
NO PRIMARY REF14-262-4682: RNCC: 3 | RNVC: 2
PR6-4: RNCC: 5 | RNVC: 9

1 Jan 1970

5120-14-549-6648
Socket Wrench Screwdriver Attachment

145496648
D.107-12: RNCC: 3 | RNVC: 2

26 Apr 2006

5120-14-211-3759
Cle Decrou De Berce

142113759
D2604-40-2: RNCC: 3 | RNVC: 2

1 Jan 1964

5120-14-412-7738
Cle Speciale

144127738
NO PRIMARY REF14-412-7738: RNCC: 3 | RNVC: 2
H140AMV208M: RNCC: 5 | RNVC: 9

5 Nov 1986

5120-14-350-1757
Spanner Wrench

143501757
0U50013: RNCC: 3 | RNVC: 2
50013: RNCC: 5 | RNVC: 2
85-689-5731: RNCC: 6 | RNVC: 9

14 Jun 1978

5120-14-279-8328
Outillage De Contro

142798328
60290-02-060C1: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-528-4678
Drift

145284678
888-466-600-1: RNCC: 3 | RNVC: 2
888-466-600-1: RNCC: 5 | RNVC: 2

30 Jan 2002

5120-14-200-2092
Open End Wrench

142002092
8810195005: RNCC: 3 | RNVC: 2
800-00-248-02: RNCC: 5 | RNVC: 2
881-0-195-005: RNCC: 5 | RNVC: 2

1 Jan 1962

5120-14-524-1547
Outil De Desserage

145241547
10444379: RNCC: 3 | RNVC: 2

7 Mar 2001

5120-14-479-0228
Cle De Cisaille

144790228
230314: RNCC: 3 | RNVC: 2

6 Dec 1995

5120-14-491-0152
Cle

144910152
4602 007 200 112: RNCC: 3 | RNVC: 2
F300 0T 001 0938: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-490-9607
Cle

144909607
4380 892 382 002: RNCC: 3 | RNVC: 2
F300 0T 000 7678: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-410-0131
Levier Outill Centr

144100131
8812988000: RNCC: 3 | RNVC: 2

4 Jun 1986

5120-14-566-7003
Screw Thread Insert Inserter

145667003
051606100: RNCC: 3 | RNVC: 2
71710060001: RNCC: 5 | RNVC: 2

8 Dec 2010

5120-14-291-3409
Guide Roulements Et

142913409
172120: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-341-7862

5120-14-253-5292
Cle Pour Blocage Re

142535292
586126: RNCC: 3 | RNVC: 9

1 Jan 1968

5120-14-227-3434

5120-14-246-2295

5120-14-523-1347
Outil Pour Poulie

145231347
317-50105: RNCC: 3 | RNVC: 2

8 Jan 2001

5120-14-245-5070

5120-14-291-8133

5120-14-304-4098
Cle A Fourche Equip

143044098
TMY20-52-301: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-428-7138
Socket Wrench Screwdriver Attachment

144287138
RT.2: RNCC: 3 | RNVC: 2
3148515140907: RNCC: 5 | RNVC: 2
16400759-5: RNCC: 5 | RNVC: 2
TVA5120-2-263-037-1.1.1: RNCC: 5 | RNVC: 2
0514090: RNCC: 5 | RNVC: 9

13 Dec 1988

5120-14-285-4433
Flat Tip Screwdriver

142854433
E74-351-1X6-5X200: RNCC: 2 | RNVC: 2
LFP54-67-613: RNCC: 5 | RNVC: 2
15-2234: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-225-6683
Cle De Serrage Spec

142256683
ANP51M53-81: RNCC: 3 | RNVC: 2
SYQ2521: RNCC: 5 | RNVC: 2

1 Jan 1966

5120-14-361-2364
Cont Outil Destract

143612364
CET-F80-16: RNCC: 3 | RNVC: 2
CET16-4: RNCC: 5 | RNVC: 2

24 Jan 1980

5120-14-208-6290

5120-14-222-6623

5120-14-433-3308
Outillage Mandrin

144333308
540859: RNCC: 3 | RNVC: 2
00540859: RNCC: 5 | RNVC: 2

19 Jul 1989

5120-14-250-5575

5120-14-204-3032
Cle Speciale

142043032
M3-051-40: RNCC: 3 | RNVC: 2
M3-051-40: RNCC: 5 | RNVC: 9

1 Jan 1963

5120-14-314-8616
Bloc Pre-Sertissage

143148616
PS25K: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-316-6660

5120-14-316-6572

5120-14-298-4541
Socket Head Screw Key

142984541
84.9/64: RNCC: 3 | RNVC: 2
91641679: RNCC: 5 | RNVC: 2
3148511252802: RNCC: 5 | RNVC: 2
84 9-64: RNCC: 5 | RNVC: 2
0125280: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-575-0982
Socket Wrench Adapter

145750982
10688019000: RNCC: 3 | RNVC: 1

13 Mar 2013

5120-14-491-3870
Open End Wrench

144913870
45-32: RNCC: 3 | RNVC: 2
3148511051351: RNCC: 5 | RNVC: 2
F300 0T 002 6721: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-274-2865
Spanner Wrench

142742865
15-07: RNCC: 3 | RNVC: 9

1 Jan 1971

5120-14-252-2731
Spanner Wrench

142522731
NO PRIMARY REF14-252-2731: RNCC: 3 | RNVC: 2
RA48: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-517-3790
Bearing Staking Installation Tool

145173790
0XB101-502-802-06: RNCC: 3 | RNVC: 2

8 Dec 1999

5120-14-341-4011
Pince Positionneur

143414011
NO PRIMARY REF14-341-4011: RNCC: 3 | RNVC: 2
11823: RNCC: 5 | RNVC: 9

16 Mar 1977

5120-14-353-7181

5120-14-298-7912

5120-14-491-0116
Coupe

144910116
4602 007 100 005: RNCC: 3 | RNVC: 2
F300 0T 001 0902: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-243-3671

5120-14-392-6637
Speciale Cle

143926637
M10130: RNCC: 3 | RNVC: 2

7 Apr 1984

5120-14-490-8889
Filiere

144908889
4067 170 000 415: RNCC: 3 | RNVC: 2
F300 0T 000 5161: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-403-2902
Bearing And Bushing Inserter

144032902
101136: RNCC: 3 | RNVC: 2

8 Aug 1985

5120-14-530-6675
Socket Wrench Screwdriver Attachment

145306675
SHP.6EL2: RNCC: 3 | RNVC: 2
8031879M00: RNCC: 5 | RNVC: 2

3 Jul 2002

5120-14-525-6615
Socket Head Screw Key

145256615
21039: RNCC: 3 | RNVC: 2
20 242 030 9970: RNCC: 3 | RNVC: 2

14 Jun 2001

5120-14-544-7623
Electronic Component Inserter And Remover

145447623
61382784: RNCC: 3 | RNVC: 2

22 Feb 2005

5120-14-239-5210

5120-14-333-3836

5120-14-565-6947
Electrical-Electronic Equipment Control Panel

145656947
531D: RNCC: 3 | RNVC: 2

16 Sep 2010

5120-14-466-4940
Spanner Wrench

144664940
851-300-134-0: RNCC: 3 | RNVC: 2

15 Nov 1993

5120-14-412-6492
Flat Tip Screwdriver

144126492
DIV/AT1019-1/2-85: RNCC: 3 | RNVC: 2

21 Oct 1986

5120-14-225-4062

5120-14-225-5368

5120-14-517-9361
Six Point Tip Screwdriver

145179361
ENFD6577-20X40: RNCC: 3 | RNVC: 2

19 Jan 2000

5120-14-422-2336
Spanner Wrench

144222336
0436-01-129000: RNCC: 3 | RNVC: 2

24 Feb 1988

5120-14-443-9717
Open End Wrench

144439717
GS120-13: RNCC: 3 | RNVC: 2

18 Dec 1990

5120-14-421-6292
Open End Wrench

144216292
210010: RNCC: 3 | RNVC: 2

20 Jan 1988

5120-14-286-6553
Spanner Wrench

142866553
MZ140: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-238-2967

5120-14-284-0486

5120-14-574-3738
Friction Igniter

145743738
W000010978: RNCC: 3 | RNVC: 2

14 Jan 2013

5120-14-327-7569
Mecani Prolongateur

143277569
M356574: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-491-0167
Cle

144910167
4602 007 200 294: RNCC: 3 | RNVC: 2
F300 0T 001 0955: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-222-8270

5120-14-567-9301
Socket Wrench Socket

145679301
TM1371G001: RNCC: 3 | RNVC: 2

26 Apr 2011

5120-14-563-4260
Box Wrench Set

145634260
64.JE6T: RNCC: 3 | RNVC: 2

8 Feb 2010

5120-14-415-0295
Open End Wrench

144150295
16965965: RNCC: 3 | RNVC: 2

26 Mar 1987

5120-14-399-3394
Face Spanner Wrench Socket

143993394
46AM087: RNCC: 3 | RNVC: 2

6 Mar 1985

5120-14-226-3745

5120-14-306-2358

5120-14-454-8839
Bloc Pre-Sertissage

144548839
RPS4F 04 1K: RNCC: 3 | RNVC: 2
RPS4F4X1K: RNCC: 5 | RNVC: 9

24 Apr 1992

5120-14-299-6428
Douille Sertissage

142996428
FF6X1B: RNCC: 3 | RNVC: 2
0T1586: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-532-2526
Socket Wrench Socket

145322526
J.13/16LA: RNCC: 3 | RNVC: 2

23 Oct 2002

5120-14-257-4390

5120-14-389-1458
Cle Pose Poignee Pi

143891458
7M286: RNCC: 3 | RNVC: 2

29 Nov 1983

5120-14-516-8069
Poussoir

145168069
5001008868: RNCC: 3 | RNVC: 2

18 Oct 1999

5120-14-493-0065
Etau

144930065
4067 160 000 994: RNCC: 3 | RNVC: 2
F300 0T 009 4430: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-567-1439
Socket Wrench Screwdriver Attachment

145671439
SHP.8LA: RNCC: 3 | RNVC: 2
3148516593238: RNCC: 5 | RNVC: 2
659323: RNCC: 5 | RNVC: 2

15 Feb 2011

5120-14-352-0835
Bearing Staking Installation Tool

143520835
341A93-3128-20: RNCC: 3 | RNVC: 2

21 Feb 1996

5120-14-391-8639
Reglage Gabarit

143918639
MJN376-21: RNCC: 3 | RNVC: 2

21 Mar 1984

5120-14-437-3573
Spanner Wrench

144373573
J00650-01S140P014: RNCC: 3 | RNVC: 2

30 Jan 1990

5120-14-292-6979
Socket Wrench Socket

142926979
S32: RNCC: 3 | RNVC: 2
V2-95-225: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-365-4921
Electrical Contact Remover

143654921
8611-07: RNCC: 3 | RNVC: 2

19 Sep 1980

5120-14-212-2417
Spanner Wrench

142122417
NO PRIMARY REF14-212-2417: RNCC: 3 | RNVC: 2
31500-2: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-452-1324
Torque Wrench Adapter

144521324
12.14: RNCC: 3 | RNVC: 2
12-14: RNCC: 5 | RNVC: 2
3148510928852: RNCC: 5 | RNVC: 2
91726713: RNCC: 5 | RNVC: 2
0092885: RNCC: 5 | RNVC: 9

18 Dec 1991

5120-14-487-5736
Open End Wrench

144875736
K7739-12108-3/4WX7/8W: RNCC: 3 | RNVC: 2
K7739-12108-7/8BSX1BS: RNCC: 3 | RNVC: 2
12108-3/4WX7/8W: RNCC: 5 | RNVC: 2
12108-7/8BSX1BS: RNCC: 5 | RNVC: 2

10 Apr 1997

5120-14-406-5675
Demontage Outil

144065675
853-200-762-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-578-2001
Bearing And Bushing Inserter And Remover

145782001
8818825003: RNCC: 3 | RNVC: 2

12 Nov 2013

5120-14-565-3961
Hand Shovel

145653961
MDS81L004: RNCC: 3 | RNVC: 2

12 Aug 2010

5120-14-416-7636
Rondelle Dappui

144167636
540387: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-410-6076
Socket Wrench Spanner Attachment

144106076
14180031C: RNCC: 3 | RNVC: 2

9 Jul 1986

5120-14-274-7875
Offset Screwdriver

142747875
236P3: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-275-1498

5120-14-490-9457
Raccord

144909457
4280 020 000 067: RNCC: 3 | RNVC: 2
F300 0T 000 7131: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-460-1922
Fixation Tube

144601922
PL1BV602OX890009A: RNCC: 3 | RNVC: 2

14 Jan 1993

5120-14-562-2127
Socket Head Screw Key

145622127
AWHH2X75: RNCC: 3 | RNVC: 2

7 Oct 2009

5120-14-391-5259
Ecrou De Demontage

143915259
A34098M: RNCC: 3 | RNVC: 2

21 Mar 1984

5120-14-571-7374
Screwdriver Bit

145717374
E-111-F5.5: RNCC: 3 | RNVC: 2

26 Apr 2012

5120-14-285-4644

5120-14-457-7581
Manutentio Ventouse

144577581
67165: RNCC: 3 | RNVC: 2
5045638: RNCC: 5 | RNVC: 9

17 Sep 1992

5120-14-202-9658

5120-14-567-2346
Hand Fiber Optic Contact Crimping Tool

145672346
2501: RNCC: 3 | RNVC: 2

23 Feb 2011

5120-14-334-8144

5120-14-240-3524

5120-14-309-6621
Outil Dextraction

143096621
CET20-11: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-293-0704
Minahouet A Fourrer

142930704
AFST930-5DCMT0UL0N: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-521-6410
Pince

145216410
116636: RNCC: 3 | RNVC: 2

30 Aug 2000

5120-14-493-0037
Cle

144930037
4065 030 000 266: RNCC: 3 | RNVC: 2
F300 0T 009 4369: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-377-2312
Cle Moyeux

143772312
5000263138: RNCC: 3 | RNVC: 2
5000263138: RNCC: 5 | RNVC: 9

17 May 1982

5120-14-220-8384

5120-14-222-1688

5120-14-425-5996
Socket Wrench Socket

144255996
NS.13/16: RNCC: 3 | RNVC: 2
3148510425405: RNCC: 5 | RNVC: 2
0042540: RNCC: 5 | RNVC: 9

12 Jul 1988

5120-14-042-3577
Pre-Sertissage Bloc

140423577
RMPS4F14X0-8M: RNCC: 3 | RNVC: 2

16 Jun 1977

5120-14-399-5287
Hand Terminal Crimping Tool

143995287
NO PRIMARY REF14-399-5287: RNCC: 3 | RNVC: 2
90035-3: RNCC: 5 | RNVC: 2
90035-3: RNCC: 5 | RNVC: 9

6 Mar 1985

5120-14-546-0405
Combination Box And Open End Wrench

145460405
40.30LA: RNCC: 3 | RNVC: 2
40.30LA: RNCC: 5 | RNVC: 2

7 Jun 2005

5120-14-562-8229
Flat Tip Screwdriver

145628229
AN4X35: RNCC: 3 | RNVC: 2
3148517732490: RNCC: 5 | RNVC: 2

24 Nov 2009

5120-14-559-5394
Box Wrench

145595394
W008110005: RNCC: 3 | RNVC: 2

22 Jan 2009

5120-14-563-7696
Hand Terminal Crimping Tool

145637696
985966: RNCC: 3 | RNVC: 2

12 Mar 2010

5120-14-345-9176

5120-14-397-2225
Montage Cone

143972225
H47639: RNCC: 3 | RNVC: 2

1 Dec 1984

5120-14-293-0183

5120-14-280-1389

5120-14-268-6307

5120-14-241-6074
Mandrin De Preserti

142416074
FF10X12MA: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-436-0255
Touche

144360255
RT30034: RNCC: 3 | RNVC: 2

29 Nov 1989

5120-14-284-2258
Pince A Segment

142842258
10311-221: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-241-1476
Cle A Ergots Specia

142411476
0669-78: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-336-2854
Appareil A Retouche

143362854
13599710T: RNCC: 3 | RNVC: 2
59971: RNCC: 5 | RNVC: 2

24 Jul 1976

5120-14-441-5974
Adjustable Wrench

144415974
GS7-8: RNCC: 3 | RNVC: 2
GS135S-8: RNCC: 5 | RNVC: 2

5 Sep 1990

5120-14-491-0250
Broche

144910250
4602 017 400 003: RNCC: 3 | RNVC: 2
F300 0T 001 1048: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-232-9181
Embout De Dynamomet

142329181
58893: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-483-0617
Spanner Wrench

144830617
10441519: RNCC: 3 | RNVC: 2

8 Aug 1996

5120-14-558-7446
Socket Wrench Socket

145587446
NKD.16A: RNCC: 3 | RNVC: 2

30 Oct 2008

5120-14-491-4487
Pochoir

144914487
1820C25: RNCC: 3 | RNVC: 2
F300 0T 002 9987: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-491-6257
Cle

144916257
3AMX 8X10: RNCC: 3 | RNVC: 2
F300 0T 003 7027: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-425-9662
Bearing And Bushing Inserter

144259662
6229: RNCC: 3 | RNVC: 2
541661: RNCC: 5 | RNVC: 2

28 Jul 1988

5120-14-469-9272
Mechanical Puller Attachment

144699272
16380787: RNCC: 3 | RNVC: 2
16380787: RNCC: 5 | RNVC: 9

18 May 1994

5120-14-249-0629
Socket Wrench Screwdriver Attachment

142490629
JS10: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-393-7015
Spanner Wrench

143937015
HN18: RNCC: 3 | RNVC: 2
SKFHN18: RNCC: 5 | RNVC: 9

7 Jun 1984

5120-14-433-1400
Bearing And Bushing Inserter And Remover

144331400
45152551: RNCC: 3 | RNVC: 2

11 Jul 1989

5120-14-412-3211
Face Spanner Wrench Socket

144123211
46AM089: RNCC: 3 | RNVC: 2

8 Oct 1986

5120-14-489-7905
Screwdriver Bit

144897905
ES.175,5T: RNCC: 3 | RNVC: 2
3148510249919: RNCC: 5 | RNVC: 2
0024991: RNCC: 5 | RNVC: 9

19 Aug 1997

5120-14-255-4174

5120-14-228-5192

5120-14-251-2340

5120-14-329-6397
Spanner Wrench

143296397
MHJ230-21: RNCC: 3 | RNVC: 2
MHJ230-21: RNCC: 5 | RNVC: 2

2 Jul 1975

5120-14-412-3676
Spanner Wrench

144123676
055W02-615349T: RNCC: 3 | RNVC: 2
85-693-4249: RNCC: 6 | RNVC: 9

13 Oct 1986

5120-14-296-9933
Open End Wrench

142969933
71-75: RNCC: 3 | RNVC: 2
71: RNCC: 5 | RNVC: 9
71-75: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-256-3114

5120-14-386-6755

5120-14-491-0199
Jauge

144910199
4602 009 600 017: RNCC: 3 | RNVC: 2
F300 0T 001 0993: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-543-0307
Spanner Wrench

145430307
30MS147-66: RNCC: 3 | RNVC: 2

18 Aug 2004

5120-14-478-3311
Screwdriver Bit

144783311
EH.102: RNCC: 3 | RNVC: 2
3148510233666: RNCC: 5 | RNVC: 2
0237077S00: RNCC: 5 | RNVC: 2
91778015: RNCC: 5 | RNVC: 2
0023366: RNCC: 5 | RNVC: 9

25 Oct 1995

5120-14-368-1972
Spanner Wrench

143681972
0408-52014: RNCC: 3 | RNVC: 2

20 Feb 1981

5120-14-386-4846
Face Spanner Wrench Socket

143864846
D46107: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-408-7325
Screwdriver Bit

144087325
1019-5B60HRC: RNCC: 3 | RNVC: 2

2 Apr 1986

5120-14-527-9406
Socket Wrench Screwdriver Attachment

145279406
NSX.27A: RNCC: 3 | RNVC: 2

3 Dec 2001

5120-14-385-8095

5120-14-490-8669
Outil

144908669
4053 010 000 821: RNCC: 3 | RNVC: 2
F300 0T 000 4907: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-566-8274
Jack Elevating Block

145668274
62514283AA: RNCC: 3 | RNVC: 2

23 Dec 2010

5120-14-209-4219

5120-14-221-0610

5120-14-505-9298
Inj Pompe Bride Cle

145059298
P117164V: RNCC: 3 | RNVC: 2

30 Mar 1998

5120-14-571-7662
Hand Terminal Crimping Tool

145717662
449B: RNCC: 3 | RNVC: 2
0857362: RNCC: 5 | RNVC: 2
3148518573627: RNCC: 5 | RNVC: 2

3 May 2012

5120-14-253-9783
Guide Prehenseur

142539783
PR47265: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-501-5554
Outillage De Verin

145015554
T60UT0034008: RNCC: 3 | RNVC: 2

4 Nov 1997

5120-14-497-8702
Cable

144978702
F300 0T 022 9436: RNCC: 3 | RNVC: 2
45525632: RNCC: 5 | RNVC: 2

22 Oct 1997

5120-14-384-7614
Electrical Card Extractor

143847614
20198023: RNCC: 3 | RNVC: 2
20198023: RNCC: 5 | RNVC: 9

2 Jun 1983

5120-14-289-9995

5120-14-572-7664
Cross Tip Screwdriver

145727664
AND2X250: RNCC: 3 | RNVC: 2
3148517737327: RNCC: 5 | RNVC: 2
773732: RNCC: 5 | RNVC: 2

31 Jul 2012

5120-14-353-2102
Outils Sup Ventouse

143532102
120A: RNCC: 3 | RNVC: 2

8 Dec 1978

5120-14-250-8172

5120-14-411-2441
Spanner Wrench

144112441
110-420-01W26H: RNCC: 3 | RNVC: 2
110-420-01-W26H: RNCC: 5 | RNVC: 2
85-692-5690: RNCC: 6 | RNVC: 9

6 Aug 1986

5120-14-413-8851
Socket Head Screw Key

144138851
M259-10039: RNCC: 3 | RNVC: 2

22 Jan 1987

5120-14-386-8769

5120-14-268-0377
Extracteur

142680377
411074M: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-323-4752
Faux Mors

143234752
63693: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-239-9611
Spanner Wrench

142399611
552-405MA083DET2: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-305-0875
Spanner Wrench

143050875
341A93-3223-00: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-222-1415
Sheet Metalworking Dolly Block

142221415
296-140X53: RNCC: 3 | RNVC: 2
0296100601: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-415-0376
Speciale Cle

144150376
853-190-015-0: RNCC: 3 | RNVC: 2

26 Mar 1987

5120-14-264-0425

5120-14-244-4105

5120-14-552-8364
Pliers

145528364
396: RNCC: 3 | RNVC: 2
396: RNCC: 5 | RNVC: 2
3148511728017: RNCC: 5 | RNVC: 2

7 Feb 2007

5120-14-544-7904
Flat Tip And Cross Tip Screwdriver Set

145447904
AY.J1: RNCC: 3 | RNVC: 2
AY.J1: RNCC: 5 | RNVC: 2

24 Feb 2005

5120-14-217-9953
Torque Wrench Adapter

142179953
0D017: RNCC: 3 | RNVC: 2
0D017: RNCC: 5 | RNVC: 2

1 Jan 1965

5120-14-432-3887
Flat Tip Screwdriver

144323887
548497: RNCC: 3 | RNVC: 2
00548497: RNCC: 5 | RNVC: 2

7 Jun 1989

5120-14-204-9569

5120-14-457-9890
Seal Inserter And Remover

144579890
540513: RNCC: 3 | RNVC: 2

2 Oct 1992

5120-14-452-1305
Bearing And Bushing Inserter And Remover

144521305
303GM91993: RNCC: 3 | RNVC: 2
91388868: RNCC: 5 | RNVC: 2
303GM91993: RNCC: 5 | RNVC: 2
303GM91993: RNCC: 5 | RNVC: 9
303GM91993: RNCC: 5 | RNVC: 9
303GM91993: RNCC: 5 | RNVC: 9

18 Dec 1991

Load More Results