What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.

A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Blacksmith's Punch?

A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Mechanical Finger?

A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.

A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Screwdriver And Wrench Assembly?

A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Stakeholder Bench Plate?

A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.

What is a Drill Drift?

A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.

A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Digging Bar?

A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

What is a Valve Spring Lifter?

A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.

What is a Fuse Puller?

A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.

Hand Tools, Nonedged, Nonpowered - France (FR)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by France (FR) - NCB is 14

Page 37 of 110

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by France

51	20	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - France (FR)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 16 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Pipe Vise? 19 Items: A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.
What is a Hand Vise? 25 Items: A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.
What is a Hand Hydraulic Jack? 133 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 153 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 903 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 17 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
Swage,Bottom,Blacksmith's 10 Items
What is a Hand Tube Flaring Tool? 23 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Blacksmith's Punch? 12 Items: A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.
What is a Drain Plug Wrench? 45 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 57 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 16 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 3829 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
Flatter,Blacksmith's 18 Items
Swage,Top,Blacksmith's 12 Items
What is a Pipe Wrench? 110 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 149 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 53 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
Screwdriver,Offset 54 Items
What is a Screwdriver Bit? 707 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Mechanical Finger? 25 Items: A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.
What is a Socket Wrench Socket? 1803 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 1412 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 1641 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 52 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 565 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
Jack,Push-Pull,Screw 30 Items
What is a Hand Tube Bender? 54 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 1106 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 55 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pinch Bar? 19 Items: A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.
What is a Pry Bar? 17 Items: A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.
What is a Wrecking Bar? 15 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 273 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 413 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 32 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 295 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
Face,Hammer,Inserted 25 Items
What is a Hole Sheet Metal Holder? 37 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Screwdriver And Wrench Assembly? 11 Items: A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.
What is a Hand Rivet Set? 121 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Stakeholder Bench Plate? 22 Items: A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.
What is a Drill Drift? 32 Items: A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.
What is a Tack Claw? 15 Items: A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.
Mattock 28 Items
What is a Socket Wrench Handle Bar? 108 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Stake,Sheet Metalworking 50 Items
Riveter,Blind,Hand 76 Items
What is a Hand Shovel? 43 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 98 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 30 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
What is a Digging Bar? 20 Items: A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.
Block,Dolly,Sheet Metalworking 56 Items
What is a Piston Ring Compressor? 34 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Valve Spring Lifter? 29 Items: A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.
What is a Fuse Puller? 20 Items: A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.
What is a Hand Lead Seal Press? 18 Items: A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.
What is a Hand Beading Tool? 91 Items: A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.
What is a Hand Hammer? 502 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
Head,Hand Hammer 81 Items
What is a Lamp Extractor? 76 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Tube Packing Ring Installing Tool? 29 Items: A Tube Packing Ring Installing Tool (INSTALLING TOOL,TUBE PACKING RING) is an item designed to insert packing rings on tubes within tube sheets on condensers and similar heat exchangers. In operation, the packing rings are assembled on the loading pin mandrel and are then transferred from the mandrel on to the tube by means of a tubular sleeve which slides on the mandrel.
What is a Carpenters' Pincers? 18 Items: A Carpenters' Pincers (PINCERS,CARPENTERS') is a plierlike hand tool having two opposing jaws which may have hammerlike backs. One handle has a nail or tack pulling claw, the other is shaped to form a screwdriver. The tool may contain a wire cutter. See also NIPPERS, END CUTTING and PINCERS, FARRIERS'.
What is a Trowel? 33 Items: A Trowel is a tool used for bricklaying, concrete work, plastering, linoleum laying, and masonry work. Excludes CORNER TOOL, CONCRETE.
What is a Hand Abrasive Wheel Dresser? 12 Items: A Hand Abrasive Wheel Dresser (DRESSER,ABRASIVE WHEEL,HAND) is a tool designed to remove glaze from, dress, shape, sharpen, and true solid abrasive wheels. Excludes NIB, DIAMOND, WHEEL DRESSING.
What is a Lamp Cap Extractor? 32 Items: A Lamp Cap Extractor (EXTRACTOR,LAMP CAP) is a tool specifically designed to facilitate the removal of lamp caps from switchboards, panels or indicator lamps.
What is a Rivet Bucking Bar? 51 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 86 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 277 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Woven Cable Grip? 23 Items: A Woven Cable Grip (GRIP,CABLE,WOVEN) is a braided wire device designed to clutch a bare or insulated conductor, cable or wire rope, for holding taut or drawing through conduit.
What is a Screw Thread Insert Extractor? 19 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is an Electron Tube Extractor? 18 Items: An Electron Tube Extractor (EXTRACTOR,ELECTRON TUBE) is a hand tool designed to facilitate the removal of electron tubes from electronic equipment and to avoid burning the fingers. It may be used for installing tubes.
What is a Cross Tip Screwdriver? 362 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 21 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 11 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 37 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Tool Handle Wedge? 10 Items: A Tool Handle Wedge (WEDGE,TOOL HANDLE) is excludes WEDGE, WOOD.
What is a Marlinespike? 16 Items: A Marlinespike is a metal hand tool made in the shape of a tapered pin. One end is pointed and the opposite end may be headed. The body may contain an eye for a lanyard sling, or be grooved lengthwise. Excludes CABLE PICK and FID.
What is an Aligning Punch? 272 Items: An Aligning Punch (PUNCH,ALIGNING) is a round, square, hexagonal or octagonal bodied hand tool, having a round tapered section 6-1/2 inches (165.1 mm) or more in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, DRIFT and DRIFTPIN.
What is a Drift Punch? 25 Items: A Drift Punch (PUNCH,DRIFT) is a round, square, hexagonal, or octagonal bodied hand tool, having a round tapered section 4 to 6 inches (101.6 mm to 152.4 mm) inclusive in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, ALIGNING; and DRIFTPIN.
What is a Putty Knife? 36 Items: A Putty Knife (KNIFE,PUTTY) is a hand tool with a nonedged blade fixed to a handle for laying on and smoothing putty and the like.
What is a Socket Wrench Adapter-Extension? 40 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 30 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 184 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Socket Wrench Ratchet Attachment? 47 Items: A Socket Wrench Ratchet Attachment (RATCHET ATTACHMENT,SOCKET WRENCH) is a connection for socket wrenches and handles. Consists of a ratcheting mechanism with an internal drive on one end and an external drive on the opposite end of the same size. The item is designed to permit continuous rotation of the socket in one direction without removing the socket or handle and without a complete rotation of the handle.
What is a Wrench Extension Handle? 81 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Socket Wrench Crowfoot Attachment? 155 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 33 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 43 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 48 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 2394 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 372 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 300 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 661 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 32 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand-Operated Grommet And Eyelet Press? 12 Items: A Hand-Operated Grommet And Eyelet Press (PRESS,GROMMET AND EYELET,HAND-OPERATED) is a device which punches or pierces holes and in addition fastens or sets eyelets and grommets in cloth, paper and similar material. May be used for fastening or setting rivets, lacing hooks and snaps in cloth, paper and similar material. It is hand operated by lever or screw action. See also PUNCH, EYELET, PLIER TYPE and PRESS, GROMMET AND EYELET, FOOT OPERATED.
What is a Claw Bar? 19 Items: A Claw Bar (BAR,CLAW) is before using, refer to Reference Drawing Group AG.
What is a Shock Type Wheel Stud Nut Wrench? 11 Items: A Shock Type Wheel Stud Nut Wrench (WRENCH,WHEEL STUD NUT,SHOCK TYPE) is a manually operated item designed to remove wheel stud nuts. In operation the inner nut is turned by a socket attached to a shaft on which is a loose swinging weighted handle. The weighted handle may be swung quickly to provide an impact force against the socket to loosen the seized or jammed nuts. The outer nut is held stationary by a separate hexagonal holding wrench.
What is a Drift Pin Set? 30 Items: A Drift Pin Set is a group of DRIFTPIN having different characteristics.
What is a Tire Iron? 25 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 115 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Blacksmith's Vise? 14 Items: A Blacksmith's Vise (VISE,BLACKSMITH'S) is a clamping device consisting of a mounting plate, one stationary and one manual screw actuated jaw and a supporting member extending downward from the stationary jaw to the floor. Designed to be mounted on a bench, table or the like. May include pipe holding jaws.
What is a Machinist's Vise? 64 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Clamp Base Bench Vise? 10 Items: A Clamp Base Bench Vise (VISE,BENCH,CLAMP BASE) is a clamping device consisting of a base, one stationary and one manual screw actuated jaw, and one or more guide bars or rods. Designed with an integral clamp for attaching to a bench, table, or the like. Does not include pipe holding jaws.
What is a Fixed Open End Wrench Set? 86 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Nail Set? 11 Items: A Nail Set is a round knurled, square, hexagonal or octagonal bodied hand tool having a round tapered section terminating in a cupped point. It is designed to set brad head nails below the surface by striking it a hammerlike blow. See also PUNCH, DRIVE PIN.
What is a Socket Wrench Set? 202 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is an Open End Box Wrench Set? 10 Items: An Open End Box Wrench Set (WRENCH SET,OPEN END BOX) is a group of WRENCH, OPEN END BOX having different characteristics.
What is a Combination Box And Open End Wrench Set? 72 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Box Wrench Set? 36 Items: A Box Wrench Set (WRENCH SET,BOX) is a group of box wrenches having different characteristics. It may include a HANDLE, EXTENSION WRENCH. See also WRENCH SET, COMBINATION, BOX AND OPEN END.
What is a Hot Line Stick? 26 Items: A Hot Line Stick is a hand tool consisting of a straight, round stick (pole) made of a suitable nonconductive material with a tool fixed to one end. The other end may be plain or have a butt mounting device fixed to it. Various types of attachments (hooks, rings, and bands) may be fixed to the body. It is designed for use in the repair and maintenance of live high voltage aerial lines. Excludes hot line sticks without heads.
Handle,Mattock-Pick 15 Items
What is a Wrench Kit? 73 Items: A Wrench Kit is an assortment of various types and sizes of wrenches such as SOCKET, SOCKET WRENCH; WRENCH, OPEN END, FIXED; WRENCH, BOX and the like. It may include adapter(s), ratchet(s) and the like. See also WRENCH SET (as modified.
What is a Brad Awl? 15 Items: A Brad Awl (AWL,BRAD) is a small, pointed tool used by shoemakers, saddlers, cabinetmakers, and the like for piercing small holes in wood, leather, and similar materials, and consists of a handle with a ferrule and a blade. The blade is round, terminating in a beveled, sharp straight edge and has a shank which passes through the center of the handle.
What is a Scratch Awl? 20 Items: A Scratch Awl (AWL,SCRATCH) is an item whose nominal length of blade is less than 4 inches (101.6 millimeters) and is provided with a nondetachable handle.
What is a Screw Extractor Set? 10 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 102 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
Jack,Scissors,Hand 26 Items
What is a Piston Ring Expander? 23 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
Mallet,Plastic 62 Items
Mallet,Rubber 10 Items
What is a Wood Mallet? 37 Items: A Wood Mallet (MALLET,WOOD) is excludes MALLET, CALKING; MALLET, HAWSING and MALLET, SERVING.
What is a Rack Bar Jack? 30 Items: A Rack Bar Jack (JACK,RACK BAR) is excludes JACK, BUMPER and JACK, REEL, HAND.
What is a Pneumatic Tire Valve Core Inserter And Remover? 14 Items: A Pneumatic Tire Valve Core Inserter And Remover (INSERTER AND REMOVER,PNEUMATIC TIRE VALVE CORE) is a bar of steel having a small cylindrical slotted end for removing or installing a valve core in a valve stem by a screwing motion. See also REPAIR TOOL, PNEUMATIC TIRE VALVE.
What is a Hand Tube Swaging Tool Kit? 20 Items: A Hand Tube Swaging Tool Kit (SWAGING TOOL KIT,TUBE,HAND) is a hand-operated noncutting tool consisting of one or more PUNCH, TUBE SWAGING, HAND and a tube flaring bar.
What is a Hand Tube Flaring Punch? 11 Items: A Hand Tube Flaring Punch (PUNCH,TUBE FLARING,HAND) is a noncutting tool having a shaped end or section designed to flare the ends of tubes. One type is designed to flare the ends of tubes against a tube sheet, and another to flare tube ends to mate with tube fittings. Includes punch components of FLARING TOOL, TUBE, HAND.
What is a Hose Strap Band Clamping Tool? 26 Items: A Hose Strap Band Clamping Tool (CLAMPING TOOL,STRAP BAND,HOSE) is an item designed to tension and lock metal straps around a rubber hose, and the like. It is also used to clamp and hold fittings therein.
What is a Mechanical Puller? 3073 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 470 Items
What is a Slip Joint Pliers? 84 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Brake Repair Pliers? 14 Items: A Brake Repair Pliers (PLIERS,BRAKE REPAIR) is a tool having jaws designed for use in brake repair operations, such as removing and replacing items such as keys, springs, and the like. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 226 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 12 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 81 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 56 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 15 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 11 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 29 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Cross Tip Screwdriver Set? 14 Items: A Cross Tip Screwdriver Set (SCREWDRIVER SET,CROSS TIP) is a group of SCREWDRIVER, CROSS TIP having different characteristics.
What is a Spanner Wrench Set? 18 Items: A Spanner Wrench Set (WRENCH SET,SPANNER) is a group of items under WRENCH, SPANNER having different characteristics.
What is a Drive Pin Punch Set? 31 Items: A Drive Pin Punch Set (PUNCH SET,DRIVE PIN) is a group of PUNCH, DRIVE PIN having different characteristics.
What is an Aligning Punch Set? 13 Items: An Aligning Punch Set (PUNCH SET,ALIGNING) is a group of PUNCH, ALIGNING having different characteristics. See also DRIFTPIN SET.
What is a Slugging Type Box Wrench Socket? 16 Items: A Slugging Type Box Wrench Socket (SOCKET,SLUGGING TYPE BOX WRENCH) is an item having a hexagonal external drive at one end, made to fit into the internal hexagonal or 12-point opening of a slugging type box wrench. The opposite end has a single-broached hexagonal opening of the same size as the external drive. The item is designed with extra thick walls to withstand the impact of sledge blows on the driving wrench.
What is a Mechanical Puller Step Plate? 44 Items: A Mechanical Puller Step Plate (STEP PLATE,MECHANICAL PULLER) is a circular disk, flanged to provide a shoulder, and designed to provide a base for the screw point of a PULLER, MECHANICAL when pulling externally mounted bearings, gears, and the like from hollow shafts or housings. It has a concentric, countersunk hole to accommodate the puller screw point.
What is a Solid Center Punch? 79 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Cable Type Ratchet Lever Puller? 20 Items: A Cable Type Ratchet Lever Puller (PULLER,RATCHET LEVER,CABLE TYPE) is an item consisting of a metal frame and ratchet lever reel to which is attached one end of a flexible cable (wire rope). The cable feeds through the fast eye in the metal frame, and may be reeved through a slip hook tackle hook. See also BINDER, LOAD; HOIST, WIRE ROPE and STRETCHER, WIRE.
What is an Electronic Equipment Tuning Wand? 18 Items: An Electronic Equipment Tuning Wand (TUNING WAND,ELECTRONIC EQUIPMENT) is a hand-held rod used in determining the adjustment of the windings of a radio frequency coil. It is made of insulating material with iron on one end and brass on the other end. By inserting the iron end in the coil, the inductance is increased and by inserting the brass end, the inductance is decreased.
What is a Combination Open End And Spanner Wrench? 14 Items: A Combination Open End And Spanner Wrench (WRENCH,OPEN END AND SPANNER,COMBINATION) is a tool having open end wrench characteristics at one end and spanner wrench features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s) at the other end.
What is a Detent Handling Tool? 187 Items: A Detent Handling Tool (HANDLING TOOL,DETENT) is a specially designed handling tool consisting of a rigid bar with a T-handle on one end. The other end is equipped with threads designed to mate the threads of a detent to facilitate inserting or extracting.
What is a Hand Material Handling Hook? 23 Items: A Hand Material Handling Hook (HOOK,MATERIAL HANDLING,HAND) is a hook whose curved end conforms to Style AP1, AP2, AP3 or AP4 of Reference Drawing Group AP. Excludes HOOK, MANHOLE COVER, HAND; HOOK, WIRE BREAKING, HAND; HOOK, ROCK CRUSHER FEEDING, HAND; HOOK, STRAINER REMOVING, HAND and HOOKS, BAG HANDLING, HAND.
What is a Magnetic Retrieving Tool? 11 Items: A Magnetic Retrieving Tool (RETRIEVING TOOL,MAGNETIC) is a hand-operated magnetic device used to locate and pick up metallic articles, such as bolts, nuts, pins, washers, and the like, in confined spaces. It may be rigid, flexible or adjustable. Excludes FINGER, MECHANICAL.
What is a Mechanical Puller Adapter? 78 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Combination Box And Open End Box Wrench? 13 Items: A Combination Box And Open End Box Wrench (WRENCH,BOX AND OPEN END BOX,COMBINATION) is a double end wrench, box and open end box, primarily designed for removing or replacing tube fittings. The opening in the open end box may be machined at an angle from the longitudinal center line of the wrench.
What is a Screw Thread Insert Inserter? 136 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Flat Tip Screwdriver Set? 48 Items: A Flat Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP) is a group of SCREWDRIVER, FLAT TIP having different characteristics.
What is a Terminal Crimping Tool Contact Positioner? 89 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 16 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is an Adjustable Wrench? 138 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 239 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 75 Items
Handle,Shovel 10 Items
What is a Socket Wrench Spanner Attachment? 88 Items: A Socket Wrench Spanner Attachment (SPANNER ATTACHMENT,SOCKET WRENCH) is an item having an adjustable or fixed span with pin, hook, or key type end that is used to fit and turn various size retaining rings, cover plates, plugs, couplings, and like parts. Usually designed to be driven by a male driver.
What is a Retaining Ring Installation Tool? 44 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Tacker? 16 Items: A Tacker is a hand-operated, hammerlike or gunlike item without a clincher, used to drive preformed connecting elements like pins, nails or staples through one object or piece of material into another. Excludes STAPLER (as modified).
What is a Bearing And Bushing Inserter? 290 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 207 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 939 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 14 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 93 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 161 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 94 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 141 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 53 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Six Point Tip Screwdriver? 155 Items: A Six Point Tip Screwdriver (SCREWDRIVER,SIX POINT TIP) is a manual screwdriver having a single nonremoveable blade having a tip with six rounded points.
What is a Seal Inserter And Remover? 147 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 478 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is a Preformed Packing Inserter And Remover? 34 Items: A Preformed Packing Inserter And Remover (INSERTER AND REMOVER,PREFORMED PACKING) is a hand tool designed to install and remove a PACKING, PREFORMED.
What is a Pin Remover? 34 Items: A Pin Remover (REMOVER,PIN) is a hand tool designed to facilitate the removal of a pin from a hole.
What is a Pin Inserter And Remover? 13 Items: A Pin Inserter And Remover (INSERTER AND REMOVER,PIN) is a rodlike tool designed to facilitate the insertion and removal of a pin from a hole.
What is an Electrical Contact Inserter And Remover? 37 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Piston Inserter? 40 Items: A Piston Inserter (INSERTER,PISTON) is a tool designed to permit installation of a piston or piston assembly without damaging the packings or piston.
What is a Spring Inserter And Remover? 85 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 13 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Stud Inserter? 22 Items: A Stud Inserter (INSERTER,STUD) is a device designed to drive in studs. It does not have any facilities for removing or extracting studs. See also INSERTER AND REMOVER, STUD.
What is a Stud Inserter And Remover? 17 Items: A Stud Inserter And Remover (INSERTER AND REMOVER,STUD) is a group of items designed to extract and to drive studs. It may include collets, guides, housings, holders and the like. See also REMOVER SET, STUD and INSERTER, STUD.
What is a Gear Inserter? 54 Items: A Gear Inserter (INSERTER,GEAR) is a hand tool designed to install various gears onto a gearshaft. It may be operated by a pushing or a striking force.
What is a Crimping Tool Die? 73 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is an Electrical Connector Inserter? 45 Items: An Electrical Connector Inserter (INSERTER,ELECTRICAL CONNECTOR) is a hand tool designed to hold an electrical connector, and to assist in the positioning and installation of the connector on a cover, panel or the like.
What is a Float? 12 Items: A Float is a tool used for concrete, plastering and grouting work.
What is a Mechanical Puller Set? 19 Items: A Mechanical Puller Set (PULLER SET,MECHANICAL) is two or more separate PULLER, MECHANICAL of different fixed sizes.
What is a Lifting Pneumatic Bag? 11 Items: A Lifting Pneumatic Bag (PNEUMATIC BAG,LIFTING) is a device made of flexible material designed to lift another item by being placed under the item and being inflated with air or some other gas. It will have a means of being connected to an air or gas source and may include a connector hose, a control valve and/or a pressure regulator.
What is a Cable Tie Installation Tool? 22 Items: A Cable Tie Installation Tool (INSTALLATION TOOL,CABLE TIE) is a lightweight, hand-held, hand-operated tool designed to fasten cable ties, straps and the like. Cable tie is inserted into the nose of the tool flush to the cable tie head. Trigger handle tightens cable tie and cuts off any excess. These installation tools are available in a variety of sizes depending on their intended use with miniature, intermediate, standard, heavy or extra heavy cross section ties.
What is a Bearing Staking Installation Tool? 159 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
Wrench Set,Ratchet 15 Items
What is a Sealant Dispenser? 26 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Retaining Ring Pliers Set? 10 Items: A Retaining Ring Pliers Set (PLIERS SET,RETAINING RING) is a group of PLIERS, RETAINING RING having different characteristics.
What is a Hand Armament Subsystem Carrier? 52 Items: A Hand Armament Subsystem Carrier (CARRIER,ARMAMENT SUBSYSTEM,HAND) is a metallic item with a clamp device and/or space for depositing articles. It is used for transporting weapon parts during maintanence and/or repair work, such as gun barrel, automatic loader, breechblock and the like.
What is a Ring Retaining Pliers Tip Set? 13 Items: A Ring Retaining Pliers Tip Set (TIP SET,PLIERS,RING RETAINING) is a collection of removable metallic tips in matched pairs used to provide various size capablities to PLIERS, RING RETAINING which permits the removal and installation of internal and external retaining rings.
What is a Plug Electrical Connector Extractor? 45 Items: A Plug Electrical Connector Extractor (EXTRACTOR,ELECTRICAL CONNECTOR,PLUG) is a hand tool designed to disassemble CONNECTOR, PLUG, ELECTRICAL from a CONNECTOR, RECEPTACLE, ELECTRICAL.
What is a Torque Wrench Adapter Set? 10 Items: A Torque Wrench Adapter Set (ADAPTER SET,TORQUE WRENCH) is tWO or more ADAPTER, TORQUE WRENCH of different sizes.
What is an Electronic Component Inserter And Remover? 79 Items: An Electronic Component Inserter And Remover (INSERTER AND REMOVER,ELECTRONIC COMPONENT) is an item which can insert or remove an electronic component package such as MICROCIRCUIT; RESISTOR, NETWORK (as modified); and the like from its mounting position or socket. Excludes INSERTER AND REMOVER, ELECTRICAL CONTACT; REMOVER, ELECTRICAL CONTACT; EXTRACTOR, ELECTRICAL CARD; EXTRACTOR, ELECTRONIC CRYSTAL UNIT; EXTRACTOR, ELECTRON TUBE.
What is an Impact Type Bit Set And Handle Screwdriver? 14 Items: An Impact Type Bit Set And Handle Screwdriver (SCREWDRIVER,BIT SET AND HANDLE,IMPACT TYPE) is an item consisting of a set of screwdriver bits and a impact driver to accommodate the bits of various types and characteristics. It is designed to transmit a strong rotating movement by the impact of a hammer blowed on the impact driver. It is used to loosen rusted or seized screws. Excludes SCREWDRIVER, BIT SET AND HANDLE.
What is a Hand Vise Jaw? 19 Items: A Hand Vise Jaw (JAW,VISE,HAND) is an item consisting of two opposing parts of a VISE, HAND. The item is moveable and able to open and close. It can hold, grasp or clamp work.
What is a Screwdriver Handle? 28 Items: A Screwdriver Handle (HANDLE,SCREWDRIVER) is an item used to accommodate various types of BIT, SCREWDRIVER. It is designed to rotate a bit that is used for installing or removing screws.
What is a Wire Twister Pliers? 25 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 284 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is a Mechanical Puller Body? 45 Items: A Mechanical Puller Body (BODY,PULLER,MECHANICAL) is an item designed to support and enclose the internal parts of a PULLER,MECHANICAL.
What is a Flat Tip And Cross Tip Screwdriver Set? 39 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is a Socket Wrench Screwdriver Attachment Set? 22 Items: A Socket Wrench Screwdriver Attachment Set (SCREWDRIVER ATTACHMENT SET,SOCKET WRENCH) is a set of screwdriver attachment, socket wrench of different sizes. Items consist of a female square drive on one end to attach to a handle, socket wrench and various screwdriver tip configurations on the opposite end. Excludes SCREWDRIVER ATTACHMENT,SOCKET WRENCH
What is an Oil Filter Wrench? 44 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 430 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Communications Equipment Spring Adjuster? 13 Items: A Communications Equipment Spring Adjuster (ADJUSTER,SPRING,COMMUNICATIONS EQUIPMENT) is a single or double end tool, equipped with slot(s) of various dimensions or with cylindrical rod(s), used for adjusting the springs or spring tensioned parts of electronic equipment.
What is a Rotating Members Aligning Tool? 32 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
What is a Final Drive Assembly Alignment Pin? 41 Items: A Final Drive Assembly Alignment Pin (ALIGNMENT PIN,FINAL DRIVE ASSEMBLY) is a special designed pin used in the assembling of the final drive.
Arm,Handling Tool 77 Items
What is a Splicing Sleeve Compressing Tool? 23 Items: A Splicing Sleeve Compressing Tool (COMPRESSING TOOL,SPLICING SLEEVE) is a hand tool having hinged leverage handles similar to a CUTTER, BOLT or pliers, designed to compress a splicing sleeve when joining the ends of two conductors, or when forming an eye splice in the end of a wire rope. Excludes CRIMPING TOOL, TERMINAL, HAND.
What is a Hand Screw Jack Extension? 14 Items: A Hand Screw Jack Extension (EXTENSION,HAND SCREW JACK) is a length of externally threaded rigid shafting which is the adjustable section of a JACK, SCREW, HAND.
What is a Mechanical Puller Gear Adapter? 21 Items: A Mechanical Puller Gear Adapter (GEAR ADAPTER,PULLER,MECHANICAL) is an adapter that adapts a PULLER,MECHANICAL, to pull a certain gear.
Handle,Hydraulic Jack 18 Items
What is a Female Electrical Contact Resizing Tool? 11 Items: A Female Electrical Contact Resizing Tool (RESIZING TOOL,FEMALE ELECTRICAL CONTACT) is a tool designed to shape to a specific size, female contacts such as those used on electrical connectors, tube sockets, crystal sockets, and pin jacks.
What is a Screwdriver And Socket Wrench Combination? 13 Items: A Screwdriver And Socket Wrench Combination is a hand-tool formed into an integral unit with a socket wrench at one end and a screwdriver bit at the other end. See also SCREWDRIVER AND WRENCH ASSEMBLY.
What is a Hand Hose Fitting Swaging Tool Kit? 11 Items: A Hand Hose Fitting Swaging Tool Kit (SWAGING TOOL KIT,HOSE FITTING,HAND) is a device, hydraulically actuated by hand or power operated pump, consisting of face plate, adapter plate, finger cages, fingers, ram, bushing, and expanding mandrels combined on a single base in various functional arrangements. It is used for swaging the outside diameter of hose assembly fittings, expanding the inside diameter of hose assemblies, and securing the fabrication of hose assemblies. Included are a hand or power operated pump, lubricant, cases, and trays.
What is a Catch Lever Tool? 12 Items: A Catch Lever Tool (LEVER TOOL,CATCH) is a specially designed hand tool which engages the opening and closing lever of a CATCH (as modified) for ease of operation. It is constructed of thin rigid material, usually flat, and one end has an engaging tongue.
What is a Manual Impact Wrench? 11 Items: A Manual Impact Wrench (WRENCH,IMPACT,MANUAL) is a manually operated handheld tool consisting of spring-loaded handle and a power-impact head which delivers a torsional impact from either continuous movement of the handle in one direction, or by a reciprocating action. It is used in tightening and loosening fasteners, such as bolts, nuts, and the like. The item may include sockets, extensions and offset fittings, nut runners, and the like.
What is a Drift? 63 Items: A Drift is an item consisting of a tubular body fitted with replaceable tips. It is designed to insert or remove mechanical components where space is restricted.
What is a Nutdriver? 46 Items: A Nutdriver is a non-powered hand tool with a screwdriver style handle, shaft and formed female hex or square socket at driving end.
What is a Locking Device Removal Tool? 12 Items: A Locking Device Removal Tool (REMOVAL TOOL,LOCKING DEVICE) is a hand tool designed to facilitate the removal of a WASHER, KEY and a LOCKING PLATE, NUT AND BOLT.
What is a Hydraulic Fitting Crimping Tool Head? 26 Items: A Hydraulic Fitting Crimping Tool Head (HEAD,CRIMPING TOOL,HYDRAULIC FITTING) is a component of a crimping tool used to compress fittings on fluid tubes. It consists of a U-shape item, in which, are mounted different sizes of DIE, CRIMPING TOOL for tubes of various diameters.
What is a Torque Screwdriver? 11 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.
What is a Special Purpose Combination Wrench? 13 Items: A Special Purpose Combination Wrench (WRENCH,COMBINATION,SPECIAL PURPOSE) is a tool having a combination of ends and facets. The ends may have open end, box or spanner characteristics. The sides may have features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s). Designed to fit specific items, not sized as standard or metric.
What is a Screwdriver Bit Holder? 56 Items: A Screwdriver Bit Holder (HOLDER,SCREWDRIVER BIT) is an attachment with a socket end for accepting male hexagon shank insert bits and a drive end for adapting to a portable power or hand tool.
What is a Telescoping Pole? 16 Items: A Telescoping Pole (POLE,TELESCOPING) is an item which is designed to be extended or compressed by the sliding of overlapping sections. This item may or may not be able to accommodate an extension.

Stock Items From Supply Class 5120 Page 37 of 110

5120-14-454-9586
Cross Tip Screwdriver

144549586
AEFP.0X75: RNCC: 3 | RNVC: 2
3148510049267: RNCC: 5 | RNVC: 2
104-3963: RNCC: 5 | RNVC: 2
0613 461 03: RNCC: 5 | RNVC: 2
AEFP.0X75: RNCC: 5 | RNVC: 2
004926: RNCC: 5 | RNVC: 9
FACOMAEFP.0X75: RNCC: 5 | RNVC: 9

29 Apr 1992

5120-14-472-5227
Socket Wrench Socket

144725227
41MI89-02M24P12: RNCC: 3 | RNVC: 2

26 Oct 1994

5120-14-478-5983
Spanner Wrench

144785983
MHJ483-21: RNCC: 3 | RNVC: 2

8 Nov 1995

5120-14-454-9501
Cross Tip Screwdriver

144549501
AEFP.00X35: RNCC: 3 | RNVC: 2
3148510049205: RNCC: 5 | RNVC: 2
1072814X00: RNCC: 5 | RNVC: 2
104-4168: RNCC: 5 | RNVC: 2
0613 461 02: RNCC: 5 | RNVC: 2
004920: RNCC: 5 | RNVC: 9
FACOMAEFP.00X35: RNCC: 5 | RNVC: 9

29 Apr 1992

5120-14-384-3117
Wrench Kit

143843117
TMY20-27-303: RNCC: 3 | RNVC: 2
26-14: RNCC: 5 | RNVC: 2
85-691-8311: RNCC: 6 | RNVC: 9

4 May 1983

5120-14-329-5961
Face Spanner Wrench Socket

143295961
C47636: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-575-3676
Flat Tip Screwdriver

145753676
10636679: RNCC: 3 | RNVC: 1

2 Apr 2013

5120-14-214-3577
Trousse Pour Outill

142143577
78812-5: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-412-1349
Socket Wrench Adapter

144121349
0-01259: RNCC: 3 | RNVC: 2
01259: RNCC: 5 | RNVC: 2

8 Oct 1986

5120-14-382-7066
Axe Extracteur

143827066
1400-121E93-726-00-0: RNCC: 3 | RNVC: 2
1400-121E93-726-00-0: RNCC: 5 | RNVC: 2

17 Feb 1983

5120-14-232-9211
Outil Pour Position

142329211
51694: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-333-3853

5120-14-534-3960
Cle

145343960
101022019043A: RNCC: 3 | RNVC: 9

21 Mar 2003

5120-14-043-0973
Filetag Outil Repar

5120-14-237-9519

5120-14-414-9127
Outil Mont Arbr Man

144149127
24545958200: RNCC: 3 | RNVC: 2
245459582: RNCC: 5 | RNVC: 9

23 Mar 1987

5120-14-491-9351
Cle

144919351
229590E: RNCC: 3 | RNVC: 2
F300 0T 006 1224: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-276-3151
Socket Wrench Socket

142763151
R5: RNCC: 3 | RNVC: 2
R-5: RNCC: 3 | RNVC: 2
R5: RNCC: 3 | RNVC: 2
65P5: RNCC: 3 | RNVC: 2
M5: RNCC: 3 | RNVC: 9
468711: RNCC: 5 | RNVC: 2
3148510505404: RNCC: 5 | RNVC: 2
3272670215757: RNCC: 5 | RNVC: 2
73R5: RNCC: 5 | RNVC: 9
DEMM5: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-529-1939
Mechanical Puller Attachment

145291939
885295-6: RNCC: 3 | RNVC: 2

15 Mar 2002

5120-14-399-2065
Socket Head Screw Key

143992065
63-3/16: RNCC: 3 | RNVC: 2
63-3-16: RNCC: 3 | RNVC: 2
3272670212206: RNCC: 5 | RNVC: 2

6 Mar 1985

5120-14-451-2684
Socket Wrench Socket

144512684
MHL237-42: RNCC: 3 | RNVC: 2
MHL237-42: RNCC: 5 | RNVC: 2

6 Nov 1991

5120-14-513-2716
Combination Box And Open End Box Wrench

145132716
NO PRIMARY REF14-513-2716: RNCC: 3 | RNVC: 2
NNP 5120860464424: RNCC: 5 | RNVC: 9

10 Mar 1999

5120-14-349-3832
Open End Wrench

143493832
9970-115-675: RNCC: 3 | RNVC: 2
85-689-8260: RNCC: 6 | RNVC: 9

22 May 1978

5120-14-426-8336
Socket Head Screw Key

144268336
0372-42-10065: RNCC: 3 | RNVC: 2

23 Sep 1988

5120-14-473-0640
Spanner Wrench

144730640
19359112: RNCC: 3 | RNVC: 2
3920.985: RNCC: 3 | RNVC: 2

7 Dec 1994

5120-14-472-2285
Socket Head Screw Key

144722285
10093664: RNCC: 3 | RNVC: 2

12 Oct 1994

5120-14-437-9382
Spanner Wrench

144379382
100957: RNCC: 3 | RNVC: 2
C63126: RNCC: 5 | RNVC: 2

28 Feb 1990

5120-14-277-3505
Spanner Wrench

142773505
8810373001: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-500-9575
Mattock-Pick Handle

145009575
06940P013000: RNCC: 3 | RNVC: 2
F300 0T 024 9787: RNCC: 6 | RNVC: 9

29 Oct 1997

5120-14-282-9193
Socket Wrench Screwdriver Attachment

142829193
M2708: RNCC: 3 | RNVC: 9
DEMM2708: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-278-4681
Spanner Wrench

142784681
163055: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-395-0711
Spanner Wrench

143950711
H46694: RNCC: 3 | RNVC: 2

2 Oct 1984

5120-14-354-2874
Spanner Wrench

143542874
0421-00407: RNCC: 3 | RNVC: 2

30 Jan 1979

5120-14-285-4478
Open End Wrench

142854478
40545: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-559-9685
Spanner Wrench

145599685
414151: RNCC: 3 | RNVC: 2

10 Mar 2009

5120-14-232-9337
Screwdriver Bit

142329337
NO PRIMARY REF14-232-9337: RNCC: 3 | RNVC: 2
0025014: RNCC: 5 | RNVC: 2
ET.103: RNCC: 5 | RNVC: 2
ET3: RNCC: 5 | RNVC: 2
ET103: RNCC: 5 | RNVC: 2
91364595: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-571-8926
Screwdriver Bit Holder

145718926
NS.237A: RNCC: 3 | RNVC: 2

22 May 2012

5120-14-282-7743
Tournevis Dhorloger

142827743
35-44: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-201-5419
Open End Wrench

142015419
31 9-16X5-8: RNCC: 3 | RNVC: 2

1 Jan 1962

5120-14-238-1352
Spanner Wrench

142381352
E74323B40AGW: RNCC: 2 | RNVC: 1
31811: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-283-8809
Spatule Rigide

142838809
S50: RNCC: 3 | RNVC: 9

1 Jan 1972

5120-14-439-6232
Bearing And Bushing Inserter

144396232
6801G32-2405-20: RNCC: 3 | RNVC: 2

16 May 1990

5120-14-201-7119
Socket Wrench Handle Bar

142017119
NO PRIMARY REF14-201-7119: RNCC: 3 | RNVC: 2
100207: RNCC: 5 | RNVC: 9

1 Jan 1962

5120-14-578-4342
Ha Vise Swivel Base

145784342
4400 13: RNCC: 3 | RNVC: 2
A09901834: RNCC: 5 | RNVC: 2
Y00015345: RNCC: 5 | RNVC: 2

28 Nov 2013

5120-14-437-1795
Douille Speciale

144371795
6911: RNCC: 3 | RNVC: 2

22 Jan 1990

5120-14-564-5145
Mattock

145645145
A251400100004: RNCC: 3 | RNVC: 2
054021: RNCC: 5 | RNVC: 2

4 May 2010

5120-14-556-5451
Detent Handling Tool

145565451
6271: RNCC: 3 | RNVC: 2

20 Mar 2008

5120-14-574-4450
Mechanical Puller Attachment

145744450
8815851001: RNCC: 3 | RNVC: 2

21 Jan 2013

5120-14-245-1830

5120-14-248-2358
Cle

142482358
74331: RNCC: 3 | RNVC: 2
85-024-8450: RNCC: 6 | RNVC: 9

1 Jan 1968

5120-14-461-3658
Spanner Wrench

144613658
1X56-137-223: RNCC: 3 | RNVC: 2

9 Mar 1993

5120-14-301-0975
Bearing And Bushing Inserter And Remover

143010975
330A98-3366-00: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-265-9587
Matrice Pour Pince

142659587
48818: RNCC: 3 | RNVC: 2
85-641-9840: RNCC: 6 | RNVC: 9

1 Jan 1970

5120-14-393-4117
Socket Head Screw Key

143934117
80-12: RNCC: 3 | RNVC: 2
61.M12: RNCC: 3 | RNVC: 2
61-M12: RNCC: 3 | RNVC: 2
3272670277106: RNCC: 5 | RNVC: 2
3148511220702: RNCC: 5 | RNVC: 2
0715 31 13: RNCC: 5 | RNVC: 2

7 Apr 1984

5120-14-342-8116
Spanner Wrench

143428116
35AM009: RNCC: 3 | RNVC: 2
85-689-3604: RNCC: 6 | RNVC: 9

16 May 1977

5120-14-404-9143
Cle Interrupteur Bi

144049143
006-13-01-506AM1: RNCC: 3 | RNVC: 2

20 Nov 1985

5120-14-304-3144
Bague De Retreint

143043144
S16-0606-0811: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-325-3432

5120-14-247-9653
Douille De Cle A Do

142479653
RT20798: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-281-2943
Adaptateur Pour Cle

142812943
C46475: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-461-8151
Socket Wrench Socket

144618151
NS-230: RNCC: 3 | RNVC: 2
3272670217409: RNCC: 5 | RNVC: 2

29 Mar 1993

5120-14-351-5939
Open End Wrench

143515939
912868: RNCC: 3 | RNVC: 2
ATS91-2868: RNCC: 3 | RNVC: 2
91-2868: RNCC: 5 | RNVC: 2
FD2048: RNCC: 5 | RNVC: 2

12 Sep 1978

5120-14-280-1706
Socket Head Screw Key

142801706
0123150: RNCC: 3 | RNVC: 2
82-15: RNCC: 5 | RNVC: 2
82.15: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-537-4386
Bearing And Bushing Inserter

145374386
350A93-3321-00: RNCC: 3 | RNVC: 2

3 Nov 2003

5120-14-454-1172
Bearing And Bushing Inserter And Remover

144541172
6802A67-10-901: RNCC: 3 | RNVC: 2
85-694-6858: RNCC: 6 | RNVC: 9

19 Mar 1992

5120-14-239-8851

5120-14-432-7923
Crochet

144327923
0341591: RNCC: 3 | RNVC: 2
CKS67: RNCC: 5 | RNVC: 2
SYQ2055: RNCC: 5 | RNVC: 2
CKS.67: RNCC: 5 | RNVC: 2
CKS.67A: RNCC: 5 | RNVC: 2
0960 046 211: RNCC: 5 | RNVC: 2

27 Jun 1989

5120-14-463-1548
Spanner Wrench

144631548
OM99879: RNCC: 3 | RNVC: 2

26 May 1993

5120-14-552-8340
Socket Head Screw Key

145528340
83H.13: RNCC: 3 | RNVC: 2
83H.13: RNCC: 5 | RNVC: 2
3148511241264: RNCC: 5 | RNVC: 2

6 Feb 2007

5120-14-433-6223
Spanner Wrench

144336223
96157506: RNCC: 3 | RNVC: 2
MI39248: RNCC: 5 | RNVC: 2

2 Aug 1989

5120-14-381-8953
Spanner Wrench

143818953
PR47298: RNCC: 3 | RNVC: 2

25 Jan 1983

5120-14-540-8367
Quick Adjusting Screw Clamp

145408367
603210: RNCC: 3 | RNVC: 2

23 Apr 2004

5120-14-451-9795
Preformed Packing Inserter And Remover

144519795
707205: RNCC: 3 | RNVC: 2

17 Dec 1991

5120-14-520-8845
Socket Head Screw Key

145208845
CLE0001939X00: RNCC: 3 | RNVC: 2

21 Jun 2000

5120-14-283-4937
Cle Speciale

142834937
406992: RNCC: 3 | RNVC: 2
406992: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-565-1922
Combination Box And Open End Wrench

145651922
440.20: RNCC: 3 | RNVC: 2
440.20: RNCC: 5 | RNVC: 2
768079: RNCC: 5 | RNVC: 2
0139-5001658: RNCC: 5 | RNVC: 2

22 Jul 2010

5120-14-421-6356
Outillage Special

144216356
0372-42-10141: RNCC: 3 | RNVC: 2

20 Jan 1988

5120-14-438-7747
Mechanical Puller Step Plate

144387747
330A93-2037-24: RNCC: 3 | RNVC: 2

4 Apr 1990

5120-14-393-0286
Combination Box And Open End Wrench

143930286
41.27: RNCC: 3 | RNVC: 2
1020953K00: RNCC: 5 | RNVC: 2
39511200: RNCC: 5 | RNVC: 2
91564530: RNCC: 5 | RNVC: 2
3148511013748: RNCC: 5 | RNVC: 2
41-27: RNCC: 5 | RNVC: 2
0101374: RNCC: 5 | RNVC: 9

12 Apr 1984

5120-14-503-5743
Detent Handling Tool

145035743
MGK104-25: RNCC: 3 | RNVC: 2

21 Jan 1998

5120-14-548-0323
Outil D'installatio

145480323
S0E-Q110-09: RNCC: 3 | RNVC: 9
S0E-Q110-09: RNCC: 5 | RNVC: 2

7 Dec 2005

5120-14-481-6032
Spanner Wrench

144816032
NO PRIMARY REF14-481-6032: RNCC: 3 | RNVC: 2
807625: RNCC: 5 | RNVC: 9

16 May 1996

5120-14-484-0919
Plug Electrical Connector Extractor

144840919
44038638: RNCC: 3 | RNVC: 2
44038638: RNCC: 5 | RNVC: 9

24 Oct 1996

5120-14-382-6785
Spanner Wrench

143826785
8811060302: RNCC: 3 | RNVC: 2

17 Feb 1983

5120-14-563-6673
Socket Head Screw Key

145636673
261320330-01: RNCC: 3 | RNVC: 2

4 Mar 2010

5120-14-491-5775
Cle

144915775
NO PRIMARY REF14-491-5775: RNCC: 3 | RNVC: 2
15CFS: RNCC: 5 | RNVC: 9
F300 0T 003 4094: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-438-5486
Pliers

144385486
1260-14P0PVC: RNCC: 3 | RNVC: 2

26 Mar 1990

5120-14-245-8119

5120-14-285-4486
Spanner Wrench

142854486
ES5260: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-452-9562
Spanner Wrench

144529562
46022803: RNCC: 3 | RNVC: 2

29 Jan 1992

5120-14-371-6606
Screw Thread Insert Inserter

143716606
01500110900: RNCC: 3 | RNVC: 2
01500110960: RNCC: 5 | RNVC: 2

5 Aug 1981

5120-14-292-6762
Electrical Card Extractor

142926762
M299555: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-553-7328
Splicing Sleeve Compressing Tool

145537328
0410 0131 000: RNCC: 3 | RNVC: 2
MO099151: RNCC: 6 | RNVC: 9

15 May 2007

5120-14-548-7739
Socket Wrench Socket

145487739
SJ.18H: RNCC: 3 | RNVC: 2

8 Feb 2006

5120-14-288-1137

5120-14-243-9302
Cle Purge Regulateu

142439302
160-888016: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-283-1521
Rodoir De Soupape

142831521
403039T: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-400-4654
Hand Tube Flaring Tool

144004654
239MU: RNCC: 3 | RNVC: 2
3148511555002: RNCC: 5 | RNVC: 2

24 Apr 1985

5120-14-253-3518
Cle Pour Bouchon De

142533518
UH6165: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-305-9441
Fuel Injection Nozzle Extractor

143059441
02640042000: RNCC: 3 | RNVC: 2
026400420: RNCC: 5 | RNVC: 2
103675: RNCC: 5 | RNVC: 2

1 Jan 1974

5120-14-445-9088
Piston Ring Expander

144459088
130300: RNCC: 3 | RNVC: 2
89415343: RNCC: 5 | RNVC: 2
130300: RNCC: 5 | RNVC: 9

27 Feb 1991

5120-14-261-4513

5120-14-234-3649

5120-14-436-0215
Bouchon Emmanchmt

144360215
806726: RNCC: 3 | RNVC: 2

29 Nov 1989

5120-14-253-2034
Cle Ecrou De Larbre

142532034
66516M1: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-325-3879
Rodoir De Robinet

143253879
NO PRIMARY REF14-325-3879: RNCC: 3 | RNVC: 2
PT762REP50: RNCC: 5 | RNVC: 9

2 Jul 1975

5120-14-416-7616
Mandrin Presse

144167616
540102: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-246-6996
Open End Wrench

142466996
10-5X7: RNCC: 3 | RNVC: 2
10-5X7C: RNCC: 5 | RNVC: 2
10-5X7CM: RNCC: 5 | RNVC: 2
10-5X7EC0: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-392-5185
De Serrag Outillage

143925185
MHN112-29: RNCC: 3 | RNVC: 2
MHN112-29: RNCC: 5 | RNVC: 2

21 Mar 1984

5120-14-260-3614
Open End Wrench

142603614
3160-95-66-020: RNCC: 3 | RNVC: 2
3160S95-66-020: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-578-1994
Mechanical Puller S

145781994
8819952001: RNCC: 3 | RNVC: 2

12 Nov 2013

5120-14-567-0394
Box Wrench

145670394
55A.46X50: RNCC: 3 | RNVC: 2
3148516988416: RNCC: 5 | RNVC: 2
698841: RNCC: 5 | RNVC: 2

1 Feb 2011

5120-14-232-9930
Matrice De Sertissa

142329930
45066-3: RNCC: 3 | RNVC: 2
45066-2: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-359-4243
Blacksmith's Anvil

143594243
3824-35: RNCC: 3 | RNVC: 9

2 Oct 1979

5120-14-315-1256
Outil Calage Ar Mat

143151256
MD003-10-00REP8: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-424-4827
Mechanical Puller Attachment

144244827
1807.28: RNCC: 3 | RNVC: 2
1807-28: RNCC: 5 | RNVC: 2
3148512273103: RNCC: 5 | RNVC: 2
0241661A00: RNCC: 5 | RNVC: 2
0227310: RNCC: 5 | RNVC: 9

19 May 1988

5120-14-532-3251
Socket Wrench Socket

145323251
SJ.5/16: RNCC: 3 | RNVC: 2

30 Oct 2002

5120-14-416-7564
Mandrin Presse

144167564
537409: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-567-9570
Ratchet Wrench

145679570
67.19: RNCC: 3 | RNVC: 2
0733829: RNCC: 5 | RNVC: 2
3148517338296: RNCC: 5 | RNVC: 2

28 Apr 2011

5120-14-336-3343
Tire Vessie Accumul

143363343
200238-03600: RNCC: 3 | RNVC: 2
200238-00000: RNCC: 5 | RNVC: 2

24 Jul 1976

5120-14-493-5240
Spanner Wrench

144935240
NO PRIMARY REF14-493-5240: RNCC: 3 | RNVC: 2
1125-30: RNCC: 5 | RNVC: 9
F300 0T 013 3497: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-383-0946
Lot De Modification

143830946
333-090-975-0: RNCC: 3 | RNVC: 2

17 Mar 1983

5120-14-522-2455
Spring Inserter And Remover

145222455
D.104: RNCC: 3 | RNVC: 2
CAE00906: RNCC: 5 | RNVC: 2

11 Oct 2000

5120-14-459-1620
Bearing And Bushing Inserter And Remover

144591620
45056171: RNCC: 3 | RNVC: 2
45056171: RNCC: 5 | RNVC: 9

19 Nov 1992

5120-14-457-9015
Torque Wrench Adapter

144579015
1265-090C505: RNCC: 3 | RNVC: 2
1265-090C505: RNCC: 5 | RNVC: 2

29 Sep 1992

5120-14-543-3574
Socket Wrench Socket

145433574
JHL-19: RNCC: 3 | RNVC: 2

22 Oct 2004

5120-14-218-8826

5120-14-229-3812
Battery Terminal Lifter-Scraper

142293812
158: RNCC: 3 | RNVC: 2
101792: RNCC: 5 | RNVC: 2
3148511389003: RNCC: 5 | RNVC: 2
0138900: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-474-7495
Bearing And Bushing Inserter And Remover

144747495
45057224: RNCC: 3 | RNVC: 2
45057224: RNCC: 5 | RNVC: 9

1 Mar 1995

5120-14-250-1736
Spanner Wrench

142501736
E74323B14AGW: RNCC: 2 | RNVC: 2

1 Jan 1968

5120-14-436-0298
Preformed Packing Inserter

144360298
RT32491: RNCC: 3 | RNVC: 2

29 Nov 1989

5120-14-383-4673
Electrical Card Extractor

143834673
20198015: RNCC: 3 | RNVC: 2
20198015: RNCC: 5 | RNVC: 9

11 Apr 1983

5120-14-410-0134
Outillag De Centrag

144100134
8812991000: RNCC: 3 | RNVC: 2

4 Jun 1986

5120-14-238-5436

5120-14-397-7616
Outil Reglage Cra

5120-14-314-6427

5120-14-272-3576

5120-14-262-9309
Cle Coudee

142629309
NO PRIMARY REF14-262-9309: RNCC: 3 | RNVC: 2
144HL65: RNCC: 5 | RNVC: 9

1 Jan 1970

5120-14-289-8507
Outil Demonte Clip

142898507
0104-074-000: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-378-5543
Jeu Plaques

143785543
6804J32-2004-00: RNCC: 3 | RNVC: 2
6804360A32-2004-00: RNCC: 5 | RNVC: 2

11 Aug 1982

5120-14-376-2274
Positionneur Segmen

143762274
NO PRIMARY REF14-376-2274: RNCC: 3 | RNVC: 2
0U130409: RNCC: 5 | RNVC: 9

30 Mar 1982

5120-14-493-9750
Cle

144939750
NO PRIMARY REF14-493-9750: RNCC: 3 | RNVC: 2
3902040: RNCC: 5 | RNVC: 9
F300 0T 014 8953: RNCC: 6 | RNVC: 9

15 Oct 1997

5120-14-348-9769
Cle Speciale

143489769
PSFE34M28HT3KV13-0UT: RNCC: 3 | RNVC: 2

19 Apr 1978

5120-14-245-1748
Poincon De Bouchonn

142451748
G1-15-485: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-491-3872
Cle Polyg

144913872
65-30X32: RNCC: 3 | RNVC: 2
F300 0T 002 6723: RNCC: 6 | RNVC: 9

8 Oct 1997

144909138
4159 311 500 400: RNCC: 3 | RNVC: 2
F300 0T 000 5497: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-409-5078
Jeu Axial Control

144095078
8814675000: RNCC: 3 | RNVC: 2

28 May 1986

5120-14-277-3493
Guide

142773493
8810424006: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-271-6124

5120-14-212-9907

5120-14-226-3687

5120-14-378-3147
Sangle A Segments

143783147
02640907700: RNCC: 3 | RNVC: 2
026409077: RNCC: 5 | RNVC: 2

20 Jul 1982

5120-14-567-6370
Torque Wrench

145676370
S.306-200R: RNCC: 3 | RNVC: 2

1 Apr 2011

5120-14-332-3825
Face Spanner Wrench Socket

143323825
M31-030: RNCC: 3 | RNVC: 2
M31-030: RNCC: 5 | RNVC: 9

2 Jul 1975

5120-14-568-4264
Mechanical Puller Attachment

145684264
C632G3019101: RNCC: 3 | RNVC: 2
C632G301901-MAM-1: RNCC: 5 | RNVC: 2

31 May 2011

5120-14-237-7653

5120-14-244-4068
Open End Wrench

142444068
CNM69-25: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-304-6918

5120-14-529-2426

5120-14-569-0321
Spring Inserter And Remover

145690321
F27366000: RNCC: 3 | RNVC: 2
F27366000: RNCC: 5 | RNVC: 2

1 Aug 2011

5120-14-410-3528
Aiguil Mandrin Pose

144103528
8812974000: RNCC: 3 | RNVC: 2

18 Jun 1986

5120-14-375-0519
Outil De Montage

143750519
220457: RNCC: 3 | RNVC: 2

30 Jan 1982

5120-14-572-1071
Screwdriver Bit

145721071
EP.000: RNCC: 3 | RNVC: 2
3148510240435: RNCC: 5 | RNVC: 2
024043: RNCC: 5 | RNVC: 2
24043: RNCC: 5 | RNVC: 2

7 Jun 2012

5120-14-227-7214
Chapeau Sur Arbre

142277214
874346: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-280-3273
Douille De Centrage

142803273
403691T: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-416-7634
Rondelle Dappui

144167634
540365: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-559-6821
Seal Inserter

145596821
8813389000: RNCC: 3 | RNVC: 2

5 Feb 2009

5120-14-335-9079
Spanner Wrench

143359079
0410-11: RNCC: 3 | RNVC: 2

24 Jul 1976

5120-14-236-6010

5120-14-555-1551
Tube Packing Ring Installing Tool

145551551
TM1664G001: RNCC: 3 | RNVC: 2

8 Oct 2007

5120-14-249-9697

5120-14-249-0659

5120-14-385-3474
Socle Btp

143853474
6806J32-1671-00: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-385-3409
Support De Torquage

143853409
6802P32-1064-20: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-379-0717
Maintie Fourchettes

143790717
365A93-3302-00: RNCC: 3 | RNVC: 2

6 Sep 1982

5120-14-355-6811
Spanner Wrench

143556811
T52-91-11-11A: RNCC: 3 | RNVC: 2

19 Mar 1979

5120-14-248-7409
Tournevis Special

142487409
E4P210-52-802: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-298-9267
Hand Intrenching Tool

142989267
NO PRIMARY REF14-298-9267: RNCC: 3 | RNVC: 2
5625-13: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-383-2732
Communications Equipment Spring Adjuster

143832732
NO PRIMARY REF14-383-2732: RNCC: 3 | RNVC: 2
31: RNCC: 5 | RNVC: 9

17 Mar 1983

5120-14-404-1094
Massette Embout

144041094
320-A32N: RNCC: 3 | RNVC: 2
320A32N: RNCC: 3 | RNVC: 2
3272670236929: RNCC: 5 | RNVC: 2

11 Sep 1985

5120-14-210-9922
Pliers

142109922
E73-130-160: RNCC: 2 | RNVC: 2
187-16CP: RNCC: 3 | RNVC: 2
204-16CP: RNCC: 3 | RNVC: 2
PUC1: RNCC: 3 | RNVC: 2
3359116: RNCC: 3 | RNVC: 2
110164: RNCC: 3 | RNVC: 9
3272670276031: RNCC: 5 | RNVC: 2

1 Jan 1964

5120-14-413-5650

5120-14-220-8556
Crochet Special

142208556
PR46584: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-548-8022
Mechanical Puller Body

145488022
T632G3013222: RNCC: 3 | RNVC: 2

13 Feb 2006

5120-14-444-8338
Spanner Wrench

144448338
0478-203145: RNCC: 3 | RNVC: 2

23 Jan 1991

5120-14-341-0172
Spanner Wrench

143410172
0415-21: RNCC: 3 | RNVC: 2

16 Mar 1977

5120-14-436-0229
Preformed Packing Inserter

144360229
807632: RNCC: 3 | RNVC: 2

29 Nov 1989

5120-14-343-1842
Screw Thread Insert Extractor

143431842
01803010000: RNCC: 3 | RNVC: 2
130505: RNCC: 5 | RNVC: 2
1735E04100: RNCC: 5 | RNVC: 2
0151685L00: RNCC: 5 | RNVC: 2
35070200: RNCC: 5 | RNVC: 2
01803010000: RNCC: 5 | RNVC: 2

16 Jun 1977

5120-14-282-9208
Socket Wrench Screwdriver Attachment

142829208
0518740: RNCC: 3 | RNVC: 2
S2712: RNCC: 3 | RNVC: 9
3148515187407: RNCC: 5 | RNVC: 2
ST.12: RNCC: 5 | RNVC: 2
ST12: RNCC: 5 | RNVC: 2
0715 137 120: RNCC: 5 | RNVC: 2
DEMS2712: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-375-8047
Manual Control Lever

143758047
302GM91993: RNCC: 3 | RNVC: 2
91372366: RNCC: 5 | RNVC: 2
302GM91993: RNCC: 5 | RNVC: 2
302GM91993: RNCC: 5 | RNVC: 9
302GM91993: RNCC: 5 | RNVC: 9

30 Mar 1982

5120-14-526-1573
Detent Handling Tool

145261573
132381: RNCC: 3 | RNVC: 2

4 Jul 2001

5120-14-476-9281
Spanner Wrench

144769281
1100507L00: RNCC: 3 | RNVC: 2

12 Jul 1995

5120-14-232-8011
Spanner Wrench

142328011
875901: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-429-9632
Screwdriver Bit

144299632
EX.106: RNCC: 3 | RNVC: 2
3148510257952: RNCC: 5 | RNVC: 2
EX106: RNCC: 5 | RNVC: 2
162-7656: RNCC: 5 | RNVC: 2
0025795: RNCC: 5 | RNVC: 9
FACOMEX.106: RNCC: 5 | RNVC: 9

21 Feb 1989

5120-14-237-4768
Bearing And Bushing Inserter And Remover

142374768
3160-95-42-005: RNCC: 3 | RNVC: 2
3160S95-42-005: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-496-0048
Cle

144960048
NO PRIMARY REF14-496-0048: RNCC: 3 | RNVC: 2
74-B3-5: RNCC: 5 | RNVC: 9
F300 0T 020 7500: RNCC: 6 | RNVC: 9

15 Oct 1997

5120-14-401-6058
Cone De Retreind

144016058
NO PRIMARY REF14-401-6058: RNCC: 3 | RNVC: 2
0U141302: RNCC: 5 | RNVC: 9
OU141302: RNCC: 5 | RNVC: 9

13 Jun 1985

5120-14-253-6483
Outillage Sertissag

142536483
0574-78: RNCC: 3 | RNVC: 2
RA574: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-357-4510
Bloc Preformage

143574510
90007130: RNCC: 3 | RNVC: 2

7 Jun 1979

5120-14-574-5016
Socket Wrench Socket

145745016
NS.13A: RNCC: 3 | RNVC: 2
3148516546708: RNCC: 5 | RNVC: 2
654670: RNCC: 5 | RNVC: 2

24 Jan 2013

5120-14-292-6996

5120-14-570-6757
Torque Wrench

145706757
S.248-340D: RNCC: 3 | RNVC: 2
3148516935489: RNCC: 5 | RNVC: 2

17 Jan 2012

5120-14-333-3844
Lot Rechang Bouchon

143333844
9070-151: RNCC: 3 | RNVC: 2
85-688-4321: RNCC: 6 | RNVC: 9

2 Jul 1975

5120-14-341-0162
Spanner Wrench

143410162
0415-04: RNCC: 3 | RNVC: 2

16 Mar 1977

5120-14-513-7357
Flat Tip Screwdriver

145137357
ENFD6561-0-6X3-5X100: RNCC: 3 | RNVC: 2

9 Apr 1999

5120-14-406-6525
Controle Pige

144066525
853-200-405-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-427-2098
Extracteur Piston

144272098
46AM079-00-0005: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-389-8510
Graissage Montage

143898510
M16-126: RNCC: 3 | RNVC: 2

20 Dec 1983

5120-14-236-5533
Socket Wrench Screwdriver Attachment

142365533
RT.4: RNCC: 3 | RNVC: 2
103586: RNCC: 5 | RNVC: 2
0514120: RNCC: 5 | RNVC: 2
3148515141201: RNCC: 5 | RNVC: 2
0184479L00: RNCC: 5 | RNVC: 2
RT4: RNCC: 5 | RNVC: 2
16400760-7: RNCC: 5 | RNVC: 2
TVA5120-2-263-037-1.1.4: RNCC: 5 | RNVC: 2
RT4: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-453-7333
Vise Jaw Caps

144537333
NO PRIMARY REF14-453-7333: RNCC: 3 | RNVC: 2
89280870: RNCC: 5 | RNVC: 2
300AA97324.A: RNCC: 5 | RNVC: 9

5 Mar 1992

5120-14-413-0257
Monte Roulements

144130257
793BE/LOG: RNCC: 3 | RNVC: 2

20 Nov 1986

5120-14-531-1204
Six Point Tip Screwdriver

145311204
AZX.30X125: RNCC: 3 | RNVC: 2
1092196A00: RNCC: 5 | RNVC: 2

24 Jul 2002

5120-14-534-0869
Preformed Packing Inserter

145340869
713028: RNCC: 3 | RNVC: 2

12 Mar 2003

5120-14-372-2374
Socket Head Screw Key

143722374
AMA2431TBIS: RNCC: 3 | RNVC: 2
2431T: RNCC: 5 | RNVC: 2

1 Sep 1981

5120-14-248-7511
Adapteur De Graissa

142487511
MS286: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-276-7008
Extracteur

142767008
09-149: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-337-5396
Socket Head Screw Key Set

143375396
0126340: RNCC: 3 | RNVC: 2
86.JU7: RNCC: 5 | RNVC: 2
86JU7: RNCC: 5 | RNVC: 2

7 Oct 1976

5120-14-321-8094
Face Spanner Wrench Socket

143218094
3160S95-63-013-1: RNCC: 3 | RNVC: 2
85-100-3198: RNCC: 6 | RNVC: 9

1 Jan 1975

5120-14-031-2106
Socket Head Screw Key

140312106
PAA15-26-021: RNCC: 3 | RNVC: 2

14 Jun 1980

5120-14-418-1880
Guide Emmanchem Axe

144181880
332A93-3111-00: RNCC: 3 | RNVC: 2

6 Aug 1987

5120-14-223-2552
Cle De Reglage Ress

142232552
D1054-5902: RNCC: 3 | RNVC: 2
D1054-5902: RNCC: 5 | RNVC: 9

1 Jan 1966

5120-14-412-7263
Pliers

144127263
NO PRIMARY REF14-412-7263: RNCC: 3 | RNVC: 2
200834: RNCC: 5 | RNVC: 9

27 Oct 1986

5120-14-228-5175
Open End Wrench

142285175
NO PRIMARY REF14-228-5175: RNCC: 3 | RNVC: 2
285-28A: RNCC: 5 | RNVC: 9

1 Jan 1966

5120-14-239-2133

5120-14-561-8243
Dispenser Proportioner Nozzle

145618243
38024005N: RNCC: 3 | RNVC: 2

10 Sep 2009

5120-14-239-9045

5120-14-225-5372

5120-14-248-6846
Tournevis Special

142486846
166709: RNCC: 3 | RNVC: 2
166709: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-249-9670

5120-14-248-3547

5120-14-249-6519
Tournevis Extracteu

142496519
225493: RNCC: 3 | RNVC: 2
225493: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-423-2275
Basculeur Cle Dyn

144232275
SP1735D-3-1050: RNCC: 3 | RNVC: 2

13 Apr 1988

5120-14-496-8217
Cle

144968217
B03-4205: RNCC: 3 | RNVC: 2
F300 0T 022 1592: RNCC: 6 | RNVC: 9

15 Oct 1997

5120-14-311-7461
Open End Wrench

143117461
6800-1057: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-315-4290
Spanner Wrench

143154290
Y075-014-000: RNCC: 3 | RNVC: 2
Y075-014: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-262-4795
Spanner Wrench

142624795
3210-97-31-029-1: RNCC: 3 | RNVC: 2
3210-97-31-029: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-573-9560
Machinist's Vise

145739560
M51233AA3500A: RNCC: 3 | RNVC: 2

23 Nov 2012

5120-14-357-9969
Equipe Embout

143579969
MKM0423200: RNCC: 3 | RNVC: 2
MKM0423200: RNCC: 5 | RNVC: 2

20 Jul 1979

5120-14-410-0518

5120-14-341-0163
Spanner Wrench

143410163
0415-06: RNCC: 3 | RNVC: 2

16 Mar 1977

5120-14-503-0936
Mechanical Puller Attachment

145030936
015022030000: RNCC: 3 | RNVC: 2

7 Jan 1998

5120-14-457-9910
Seal Inserter And Remover

144579910
541448: RNCC: 3 | RNVC: 2

2 Oct 1992

5120-14-539-0632
Spanner Wrench

145390632
NGM0060512015132: RNCC: 2 | RNVC: 2

9 Dec 2003

5120-14-204-2993

5120-14-574-1994
Socket Head Screw Key Set

145741994
1-13-929: RNCC: 3 | RNVC: 2
E113929: RNCC: 5 | RNVC: 9

14 Dec 2012

5120-14-366-7136

5120-14-364-4089
Palier Extracteur

143644089
UGB232-41: RNCC: 3 | RNVC: 2
MGB232-41: RNCC: 5 | RNVC: 2

7 Aug 1980

5120-14-212-9121
Cle Ouverte Special

142129121
9970-115-039: RNCC: 3 | RNVC: 2
9970-115-039-01: RNCC: 3 | RNVC: 2

1 Jan 1964

5120-14-407-2747

5120-14-404-1187

5120-14-276-3243
Screwdriver Bit

142763243
NO PRIMARY REF14-276-3243: RNCC: 3 | RNVC: 2
C0PSAT1875L6: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-363-6028

5120-14-396-2334
Extracteur Segment

143962334
90890-02336: RNCC: 3 | RNVC: 2

27 Nov 1984

5120-14-345-9752
Screwdriver Bit

143459752
BTW5: RNCC: 3 | RNVC: 2
BTW5: RNCC: 5 | RNVC: 2
85-689-3422: RNCC: 6 | RNVC: 9

5 Nov 1977

5120-14-565-1308
Brad Awl

145651308
888-382-407-0: RNCC: 3 | RNVC: 2

13 Jul 2010

5120-14-314-9112
Open End Wrench

143149112
M2-060-5: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-224-8547
Socket Head Screw Key

142248547
044BBC4BBF4PL1/2BREP13: RNCC: 3 | RNVC: 2
044BBC4BBF4AREP13: RNCC: 5 | RNVC: 2

1 Jan 1966

5120-14-343-4555
Spanner Wrench

143434555
6712A1F16: RNCC: 2 | RNVC: 2

16 Jun 1977

5120-14-437-2470
Spanner Wrench

144372470
0490-210003: RNCC: 3 | RNVC: 2

24 Jan 1990

5120-14-266-4875

5120-14-491-0520
Cle

144910520
51380994M: RNCC: 3 | RNVC: 2
F300 0T 001 2500: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-545-6502
Spanner Wrench

145456502
H130844: RNCC: 3 | RNVC: 2

26 Apr 2005

5120-14-418-3450
Face Spanner Wrench Socket

144183450
8813861001: RNCC: 3 | RNVC: 2

12 Aug 1987

5120-14-446-3874
Spanner Wrench

144463874
3511 192 40311: RNCC: 3 | RNVC: 2

18 Mar 1991

5120-14-426-8292
Socket Head Screw Key

144268292
0419-40045: RNCC: 3 | RNVC: 2

23 Sep 1988

5120-14-393-8865
Poussoir Outil

143938865
NO PRIMARY REF14-393-8865: RNCC: 3 | RNVC: 2
OU138036: RNCC: 5 | RNVC: 9

23 Jun 1984

5120-14-226-0015

5120-14-351-9462

5120-14-490-8957
Manodet

144908957
4067 590 002 081: RNCC: 3 | RNVC: 2
F300 0T 000 5244: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-514-1223
Six Point Tip Screwdriver

145141223
ENFD6566-1-2X8X150: RNCC: 3 | RNVC: 2

27 Apr 1999

5120-14-294-4075
Freinoir Coude

142944075
8810120027: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-491-0176
Compas

144910176
4602 007 400 016: RNCC: 3 | RNVC: 2
F300 0T 001 0965: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-490-6875
Drill

144906875
240 D 01819 000: RNCC: 3 | RNVC: 2
F300 0T 000 0983: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-437-4398
Rotating Members Aligning Tool

144374398
NO PRIMARY REF14-437-4398: RNCC: 3 | RNVC: 2
89280246: RNCC: 5 | RNVC: 2
37023: RNCC: 5 | RNVC: 9

31 Jan 1990

5120-14-245-8136
Outil De Demontage

142458136
NO PRIMARY REF14-245-8136: RNCC: 3 | RNVC: 2
TN1361-5100BIS: RNCC: 5 | RNVC: 2
920050: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-430-1071
Spanner Wrench

144301071
6232-54669: RNCC: 3 | RNVC: 2

1 Mar 1989

5120-14-288-6997
Bague De Montage

142886997
D1553-4841: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-344-7850
Bearing And Bushing Remover

143447850
8810576000: RNCC: 3 | RNVC: 2
85-688-8986: RNCC: 6 | RNVC: 9

9 Sep 1977

5120-14-204-3051
Adaptateur Special

142043051
MS277: RNCC: 3 | RNVC: 2
MS277: RNCC: 5 | RNVC: 9

1 Jan 1963

5120-14-261-0368
Spanner Wrench

142610368
0335-78: RNCC: 3 | RNVC: 2
RA335: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-437-2021
Bearing And Bushing Inserter

144372021
095040E: RNCC: 3 | RNVC: 2

23 Jan 1990

5120-14-358-3622
Open End Wrench

143583622
522CM16X17: RNCC: 3 | RNVC: 9
DEM522CM16X17: RNCC: 5 | RNVC: 9

13 Aug 1979

5120-14-537-4490
Socket Head Screw Key

145374490
82H.8H0P: RNCC: 3 | RNVC: 2

3 Nov 2003

5120-14-534-5343
Socket Wrench Socket

145345343
6542POC: RNCC: 3 | RNVC: 2

26 Mar 2003

5120-14-322-8697
Spanner Wrench

143228697
PR46428: RNCC: 3 | RNVC: 2

7 Mar 1996

5120-14-324-1982
Adjustable Wrench

143241982
BBW183: RNCC: 3 | RNVC: 9

1 Jan 1975

5120-14-508-9671
Stakeholder Bench Plate

145089671
PL-139: RNCC: 3 | RNVC: 2
PL139: RNCC: 5 | RNVC: 2

9 Oct 1998

5120-14-244-4176
Open End Wrench

142444176
10-19X21: RNCC: 3 | RNVC: 2
10-19X21CM: RNCC: 5 | RNVC: 2
91313175: RNCC: 5 | RNVC: 2
10-19X21C: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-042-9444
Montage-Demon Outil

140429444
1-1038-02-117: RNCC: 3 | RNVC: 9

12 Nov 1981

5120-14-284-5104
Socket Head Screw Key

142845104
T0120BBC5APL5REP8: RNCC: 3 | RNVC: 2
403656TREP8: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-481-8926
Spanner Wrench

144818926
10341028: RNCC: 3 | RNVC: 2

6 Jun 1996

5120-14-527-8640
Torque Wrench Adapter

145278640
E2C001230000108: RNCC: 3 | RNVC: 2

28 Nov 2001

5120-14-443-1713
Socket Head Screw Key

144431713
25510800400: RNCC: 3 | RNVC: 2

7 Nov 1990

5120-14-523-5450
Hydraulic Fitting Crimping Tool Head

145235450
DLT10PSHAS010: RNCC: 3 | RNVC: 2

24 Jan 2001

5120-14-421-0124
Regle Dalignement

144210124
39529410: RNCC: 3 | RNVC: 2
39529410: RNCC: 5 | RNVC: 9

6 Jan 1988

5120-14-357-9960
Joint Chargeur

143579960
MGF257-21: RNCC: 3 | RNVC: 2
MGF257-21: RNCC: 5 | RNVC: 2

20 Jul 1979

5120-14-383-0608
Outillage Demmanche

143830608
F47184: RNCC: 3 | RNVC: 2

17 Mar 1983

5120-14-299-6425
Douille Sertissage

142996425
FF8X08B: RNCC: 3 | RNVC: 2
0T1603: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-491-8488
Cle

144918488
417127410100: RNCC: 3 | RNVC: 2
F300 0T 005 1190: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-566-2732
Detent Handling Tool

145662732
62116668AA: RNCC: 3 | RNVC: 2

2 Nov 2010

5120-14-553-9933
Combination Box And Open End Wrench

145539933
51A-24: RNCC: 3 | RNVC: 2

6 Jun 2007

5120-14-344-1109
Handling Tool Arm

143441109
J00790-02-1000P015: RNCC: 3 | RNVC: 2

13 Jul 1977

5120-14-308-7994
Open End Wrench

143087994
NO PRIMARY REF14-308-7994: RNCC: 3 | RNVC: 2
0102368: RNCC: 5 | RNVC: 2
44-6X8: RNCC: 5 | RNVC: 2
44.6X8: RNCC: 5 | RNVC: 2
0110733B00: RNCC: 5 | RNVC: 2
99036821: RNCC: 5 | RNVC: 2

1 Jan 1974

5120-14-482-0374
Spanner Wrench

144820374
D05-0231-D05: RNCC: 3 | RNVC: 2

15 Jun 1996

5120-14-395-4097
Cle Speciale

143954097
7602-0832: RNCC: 3 | RNVC: 2

11 Oct 1984

5120-14-443-9886
Open End Wrench

144439886
GS125-22: RNCC: 3 | RNVC: 2

18 Dec 1990

5120-14-493-0083
Cle

144930083
4169 151 270 161: RNCC: 3 | RNVC: 2
F300 0T 009 4485: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-466-7204
Flat Tip Screwdriver

144667204
AG.10X175: RNCC: 3 | RNVC: 2
0005741: RNCC: 5 | RNVC: 2
3148510057415: RNCC: 5 | RNVC: 2
AG10X175: RNCC: 5 | RNVC: 2
91745462: RNCC: 5 | RNVC: 2

24 Nov 1993

5120-14-446-7173
Spanner Wrench

144467173
60915281: RNCC: 3 | RNVC: 2
89280592: RNCC: 5 | RNVC: 2

9 Apr 1991

5120-14-469-8538
Outil Demont.Embout

144698538
30595712: RNCC: 3 | RNVC: 2
1071121T00: RNCC: 5 | RNVC: 2

16 May 1994

5120-14-461-4695
Immobilisation Cle

144614695
5001008666: RNCC: 3 | RNVC: 2

10 Mar 1993

5120-14-376-2329

5120-14-401-9597
Retaining Ring Pliers

144019597
43-14: RNCC: 3 | RNVC: 9

26 Jun 1985

5120-14-379-0706
Bearing And Bushing Inserter

143790706
365A93-3111-25: RNCC: 3 | RNVC: 2

6 Sep 1982

5120-14-371-9918
Screwdriver Bit

143719918
0023948: RNCC: 3 | RNVC: 2
ENT.303/4: RNCC: 5 | RNVC: 2
ET3-4: RNCC: 5 | RNVC: 2
ET3/4: RNCC: 5 | RNVC: 2

5 Aug 1981

5120-14-281-1954
Socket Wrench Socket

142811954
65LT7-8: RNCC: 3 | RNVC: 2
S7-8L: RNCC: 3 | RNVC: 2
SL7-8: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-209-5404
Cle Pour Chapeau Ar

142095404
851-200-208-0: RNCC: 3 | RNVC: 2
9970-111-038: RNCC: 3 | RNVC: 2
9970-111-038-00: RNCC: 3 | RNVC: 2

1 Jan 1964

5120-14-529-2697
Cross Tip Screwdriver

145292697
AZD.2X400: RNCC: 3 | RNVC: 2
3148510134130: RNCC: 5 | RNVC: 2

20 Mar 2002

5120-14-385-6947
Extracteur

143856947
2-33900: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-375-1160
Bloc Preformage

143751160
80007125: RNCC: 3 | RNVC: 2

30 Jan 1982

5120-14-477-1243
Porte-Joint Guide

144771243
5001008469: RNCC: 3 | RNVC: 2

26 Jul 1995

5120-14-306-9695

5120-14-499-6702
Cle

144996702
E03-4371: RNCC: 3 | RNVC: 2
F300 0T 023 6523: RNCC: 6 | RNVC: 9

29 Oct 1997

5120-14-245-8384
Arrache Roulement

142458384
NO PRIMARY REF14-245-8384: RNCC: 3 | RNVC: 2
13B8012: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-245-9065
Collier Pour Evasem

142459065
7062BA1C0LLIERT1-10: RNCC: 3 | RNVC: 9

1 Jan 1968

5120-14-327-5421
Socket Wrench Socket

143275421
J.18: RNCC: 3 | RNVC: 2
3148510272207: RNCC: 5 | RNVC: 2
91569712: RNCC: 5 | RNVC: 2
465087: RNCC: 5 | RNVC: 2
J18: RNCC: 5 | RNVC: 2
0027220: RNCC: 5 | RNVC: 9

2 Jul 1975

5120-14-489-3894
Screwdriver Bit

144893894
3246-894-000: RNCC: 3 | RNVC: 2
1113290E00: RNCC: 5 | RNVC: 2
3246-894-000: RNCC: 5 | RNVC: 9

16 Jul 1997

5120-14-324-6933

5120-14-392-7213
Spanner Wrench

143927213
043801-616000: RNCC: 3 | RNVC: 2
0438-01-616000: RNCC: 5 | RNVC: 2

7 Apr 1984

5120-14-399-7614
Cle Serrage Tuyere

143997614
16300855: RNCC: 1 | RNVC: 2
044U13-651387N: RNCC: 3 | RNVC: 2
0651387N00: RNCC: 5 | RNVC: 2
65-7-01-44LN00-554653F: RNCC: 5 | RNVC: 2
16300855: RNCC: 5 | RNVC: 9
0418699T00: RNCC: 5 | RNVC: 9

14 Mar 1985

5120-14-423-2342
Basculeur Cle Dyn

144232342
SP2086D-3-510: RNCC: 3 | RNVC: 2

14 Apr 1988

5120-14-244-4134
Socket Wrench Socket

142444134
J-11: RNCC: 3 | RNVC: 2
J11: RNCC: 3 | RNVC: 2
3272670211124: RNCC: 5 | RNVC: 2
74J11: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-391-4246
Mise En Place Outil

143914246
NO PRIMARY REF14-391-4246: RNCC: 3 | RNVC: 2
1805-16: RNCC: 5 | RNVC: 2

1 Mar 1984

5120-14-558-4758
Seal Inserter

145584758
332A93-3241-00: RNCC: 3 | RNVC: 2

6 Oct 2008

5120-14-401-6064
Retraction Cone

144016064
NO PRIMARY REF14-401-6064: RNCC: 3 | RNVC: 2
OU141345: RNCC: 5 | RNVC: 9
0U141345: RNCC: 5 | RNVC: 9

13 Jun 1985

5120-14-430-1004
Spanner Wrench

144301004
6814-58244: RNCC: 3 | RNVC: 2

1 Mar 1989

5120-14-300-4171
Extracteur

143004171
14-130-004-00: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-490-8886
Filiere

144908886
4067 170 000 412: RNCC: 3 | RNVC: 2
F300 0T 000 5158: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-312-9874

5120-14-217-0048
Cle Pour Accumulate

142170048
AC79489A: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-248-7451

5120-14-316-6620

5120-14-243-6688

5120-14-562-4428
Hand Lead Seal Press

145624428
HSPV: RNCC: 3 | RNVC: 2

26 Oct 2009

5120-14-339-1318
Outillage Serrage

143391318
SPL30886: RNCC: 3 | RNVC: 2

17 Dec 1976

5120-14-275-2599
Cle Dallumeur

142752599
7M212: RNCC: 3 | RNVC: 2
RACD51: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-210-3481

5120-14-281-2902
Extenseur Montage S

142812902
121E95-170-00-0: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-215-9633
Cle A Panier Hexago

142159633
773-411-003F5-51SURPLATS: RNCC: 3 | RNVC: 2
773-411-003F5-51SURPLATS: RNCC: 5 | RNVC: 9
773-411-003FF5-51SURPLATS: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-476-7535
Flat Tip Screwdriver

144767535
0012985: RNCC: 3 | RNVC: 2
AY.3X50: RNCC: 5 | RNVC: 2

28 Jun 1995

5120-14-467-1936
Open End Wrench

144671936
415045: RNCC: 3 | RNVC: 2

21 Dec 1993

5120-14-487-0586
Socket Wrench Screwdriver Attachment

144870586
45914: RNCC: 3 | RNVC: 2
45914: RNCC: 5 | RNVC: 2

2 Apr 1997

5120-14-475-1001
Poignee Handle

144751001
29799690: RNCC: 3 | RNVC: 9

17 Mar 1995

5120-14-371-8993
Flat Tip Screwdriver

143718993
4835: RNCC: 3 | RNVC: 2

5 Aug 1981

5120-14-384-6256
Electrical Card Extractor

143846256
16928981: RNCC: 3 | RNVC: 2
16928981: RNCC: 5 | RNVC: 9

2 Jun 1983

5120-14-265-9577
Hand Terminal Crimping Tool

142659577
781019: RNCC: 3 | RNVC: 2
69064: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-383-2594
Socket Head Screw Key

143832594
PR47092: RNCC: 3 | RNVC: 2

17 Mar 1983

5120-14-251-1134

5120-14-247-4770
Appareil De Demonta

142474770
401891: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-260-3254
Socket Wrench Socket

142603254
9970-111-124: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-427-8529
Adjustable Wrench

144278529
113.15EC: RNCC: 3 | RNVC: 2
113-15EC: RNCC: 5 | RNVC: 2
0183654A00: RNCC: 5 | RNVC: 2
250-4330: RNCC: 5 | RNVC: 2
3148511326503: RNCC: 5 | RNVC: 2
FACOM 113-15EC: RNCC: 5 | RNVC: 2
0132650: RNCC: 5 | RNVC: 9
FACOM113.15EC: RNCC: 5 | RNVC: 9
958 230 002 001: RNCC: 6 | RNVC: 9

17 Nov 1988

5120-14-436-0188
Bloc Serrage Vis

144360188
RT30445: RNCC: 3 | RNVC: 2

29 Nov 1989

5120-14-225-4006

5120-14-284-1943
Boite Composition S

142841943
0516660: RNCC: 3 | RNVC: 2
S.442E: RNCC: 5 | RNVC: 2
S442E: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-531-6527
Socket Wrench Socket

145316527
S.16F: RNCC: 3 | RNVC: 2
3148510538181: RNCC: 5 | RNVC: 2

10 Sep 2002

5120-14-349-6037
Tube Debut Injectio

143496037
216032: RNCC: 3 | RNVC: 2

22 May 1978

5120-14-406-6390
Joints Emmanche

144066390
OUT50107: RNCC: 3 | RNVC: 2
0UT50107: RNCC: 5 | RNVC: 2

8 Jan 1986

5120-14-236-2438

5120-14-445-9030
Flat Tip Screwdriver

144459030
NO PRIMARY REF14-445-9030: RNCC: 3 | RNVC: 2
0003966: RNCC: 5 | RNVC: 2
ACH.8EX200: RNCC: 5 | RNVC: 2
ACH8EX200: RNCC: 5 | RNVC: 2
91629096: RNCC: 5 | RNVC: 2

27 Feb 1991

5120-14-489-5573
Bearing And Bushing Inserter And Remover

144895573
332A93-3401-10: RNCC: 3 | RNVC: 2

30 Jul 1997

5120-14-488-8734
Torque Wrench Adapter

144888734
D-41: RNCC: 3 | RNVC: 2
D41: RNCC: 5 | RNVC: 2

11 Jun 1997

5120-14-395-0753
De Retreint Bague

143950753
H46678: RNCC: 3 | RNVC: 2

2 Oct 1984

5120-14-281-7833

5120-14-567-5894
Torque Wrench Adapter

145675894
08002387-AA: RNCC: 3 | RNVC: 2

28 Mar 2011

5120-14-442-2685
Flat Tip Screwdriver Set

144422685
NO PRIMARY REF14-442-2685: RNCC: 3 | RNVC: 2
0500635: RNCC: 5 | RNVC: 2
91710198: RNCC: 5 | RNVC: 2
AS8: RNCC: 5 | RNVC: 2

8 Oct 1990

5120-14-514-0134
Open End Wrench

145140134
ENFD29159-21X23: RNCC: 3 | RNVC: 2

22 Apr 1999

5120-14-224-4418
Retaining Ring Pliers

142244418
NO PRIMARY REF14-224-4418: RNCC: 3 | RNVC: 2
48D: RNCC: 5 | RNVC: 9

1 Jan 1966

5120-14-406-5664
Joint Tori Emmanche

144065664
853-201-247-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-237-4691
Obus Demmanchement

142374691
3130S95-00-108: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-487-5739
Socket Head Screw Key

144875739
K7739-12113-0BA: RNCC: 3 | RNVC: 2
12113-0BA: RNCC: 5 | RNVC: 2

10 Apr 1997

5120-14-566-2685
C Clamp

145662685
MDN82B105: RNCC: 3 | RNVC: 2

2 Nov 2010

5120-14-276-3387
Porte Clapet

142763387
NO PRIMARY REF14-276-3387: RNCC: 3 | RNVC: 2
6G01-061A11: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-244-4133
Socket Wrench Socket

142444133
J-10: RNCC: 3 | RNVC: 2
J10: RNCC: 3 | RNVC: 2
3272670237452: RNCC: 5 | RNVC: 2
74J10: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-406-9993
Douille De Montage

144069993
780BELOG3-3P: RNCC: 3 | RNVC: 2

24 Jan 1986

5120-14-214-2823
Empreinte Cartouche

142142823
9970-111-080: RNCC: 3 | RNVC: 2
9970-111-080-00: RNCC: 5 | RNVC: 2

1 Jan 1965

5120-14-496-3090
Brad Awl

144963090
EL62-1-17: RNCC: 3 | RNVC: 2
F300 0T 021 3766: RNCC: 6 | RNVC: 9

15 Oct 1997

5120-14-459-2612
Rotule Extracteur

144592612
30MS147-09: RNCC: 3 | RNVC: 2

19 Nov 1992

5120-14-412-9792
Torque Wrench Adapter

144129792
853-100-237-0: RNCC: 3 | RNVC: 2

5 Nov 1986

5120-14-546-3464
Face Spanner Wrench Socket

145463464
T321G30T0002: RNCC: 1 | RNVC: 2
A97101: RNCC: 3 | RNVC: 2

27 Jun 2005

5120-14-544-0023
Hand Terminal Crimping Tool

145440023
517 09: RNCC: 3 | RNVC: 2
AA001698: RNCC: 6 | RNVC: 9

22 Dec 2004

5120-14-513-0137
Socket Head Screw Key

145130137
SP7689: RNCC: 3 | RNVC: 2
SP7689: RNCC: 5 | RNVC: 2

24 Feb 1999

5120-14-321-1481
Spanner Wrench

143211481
5152J: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-329-9515
Slugging Type Box Wrench Socket

143299515
50-60: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-457-4363
Bearing And Bushing Remover

144574363
45057154: RNCC: 3 | RNVC: 2
45057154: RNCC: 5 | RNVC: 9

3 Sep 1992

5120-14-520-9485
Combination Open End And Spanner Wrench

145209485
0014082: RNCC: 3 | RNVC: 2

23 Jun 2000

5120-14-361-1819
Open End Wrench

143611819
413950: RNCC: 3 | RNVC: 9

24 Jan 1980

5120-14-416-7506
Rondelle Dappui

144167506
537269: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-248-7463

5120-14-432-7124
Spring Inserter And Remover

144327124
NO PRIMARY REF14-432-7124: RNCC: 3 | RNVC: 2
0U139133: RNCC: 5 | RNVC: 9
OU139133: RNCC: 5 | RNVC: 9

21 Jun 1989

5120-14-477-5007
Socket Head Screw Key

144775007
SA-14-2-01: RNCC: 3 | RNVC: 2
0460298E00: RNCC: 5 | RNVC: 2

7 Sep 1995

5120-14-215-8032

5120-14-316-6571

5120-14-342-8767
Quick Adjusting Screw Clamp

143428767
672-40: RNCC: 3 | RNVC: 2
4-40: RNCC: 3 | RNVC: 2

16 May 1977

5120-14-321-1506
Screwdriver Bit

143211506
1007-5: RNCC: 3 | RNVC: 2
85-681-3330: RNCC: 6 | RNVC: 9

1 Jan 1975

5120-14-545-3353
Spanner Wrench

145453353
576PY043: RNCC: 3 | RNVC: 2

5 Apr 2005

5120-14-379-7872
Ecrou De Demontage

143797872
A34088N: RNCC: 3 | RNVC: 2

20 Oct 1982

5120-14-564-3107
Electri Tube Wrench

145643107
61925796AA: RNCC: 3 | RNVC: 2

22 Apr 2010

5120-14-420-7179
Outil De Cambrage

144207179
6511-53428: RNCC: 3 | RNVC: 2
53428: RNCC: 5 | RNVC: 2

16 Dec 1987

5120-14-522-7484
Poussoir De Siege

145227484
MAT171-0435F31: RNCC: 3 | RNVC: 2

20 Nov 2000

5120-14-376-7753
Open End Wrench

143767753
NO PRIMARY REF14-376-7753: RNCC: 3 | RNVC: 2
227289: RNCC: 5 | RNVC: 9

28 Apr 1982

5120-14-531-5709
Mechanical Puller Attachment

145315709
5329-054-000: RNCC: 3 | RNVC: 2

28 Aug 2002

5120-14-462-1932
Leveling-Support Jack Set

144621932
952-01-05-00: RNCC: 3 | RNVC: 2

14 Apr 1993

5120-14-393-5631
Spanner Wrench

143935631
MN7062RUF1/1-7062RGF1/2ET2/2: RNCC: 3 | RNVC: 9
MN7062RUF1-1-7062RGF1-2ET2-2: RNCC: 5 | RNVC: 9

7 Apr 1984

5120-14-316-9161
Mechanical Puller Adapter

143169161
U.51B5-3: RNCC: 3 | RNVC: 2
0761860: RNCC: 5 | RNVC: 2
EMB0UTU51-20: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-261-7666

5120-14-376-2297

5120-14-575-8107
Seal Inserter And Remover

145758107
TM3139G001: RNCC: 3 | RNVC: 2

3 May 2013

5120-14-321-2076
Enclume Pose Rivet

143212076
23521050023: RNCC: 3 | RNVC: 2
52520500: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-365-1637
Decalaminage Fraise

143651637
M02018NM: RNCC: 3 | RNVC: 2
0000331068: RNCC: 5 | RNVC: 2
331068: RNCC: 5 | RNVC: 9
0000331068: RNCC: 5 | RNVC: 9

2 Sep 1980

5120-14-309-7443
Invent Ens Obt Mrp

143097443
341A96-3010-21: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-384-7369
Electrical Card Extractor

143847369
NO PRIMARY REF14-384-7369: RNCC: 3 | RNVC: 2
16931934: RNCC: 5 | RNVC: 9

2 Jun 1983

5120-14-238-2264
Open End Wrench

142382264
D1054-5692: RNCC: 3 | RNVC: 2
D1054-5692: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-400-6887
Spanner Wrench

144006887
66-921-10-06: RNCC: 3 | RNVC: 2

8 May 1985

5120-14-539-6599
Hose Strap Band Clamping Tool

145396599
110-8420-000: RNCC: 3 | RNVC: 2
18833259-7: RNCC: 5 | RNVC: 2
CO 110-8420-000: RNCC: 5 | RNVC: 2

28 Jan 2004

5120-14-269-5215
Socket Wrench Screwdriver Attachment

142695215
ST.14: RNCC: 3 | RNVC: 2
3148515187605: RNCC: 5 | RNVC: 2
ST14: RNCC: 5 | RNVC: 2
91304142: RNCC: 5 | RNVC: 2
0715 137 14: RNCC: 5 | RNVC: 2
0518760: RNCC: 5 | RNVC: 9

1 Jan 1970

5120-14-529-8156
Socket Wrench Socket Set

145298156
DFE102535: RNCC: 3 | RNVC: 2

12 Apr 2002

5120-14-311-1372
Spanner Wrench

143111372
598: RNCC: 3 | RNVC: 2
598: RNCC: 5 | RNVC: 2

1 Jan 1974

5120-14-286-8645
Electron Tube Extractor

142868645
2836-4: RNCC: 3 | RNVC: 2
2836-4: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-375-8026
Spanner Wrench

143758026
300A97140: RNCC: 3 | RNVC: 2
91371580: RNCC: 5 | RNVC: 2
300A97140: RNCC: 5 | RNVC: 2
300A97140: RNCC: 5 | RNVC: 9
300A97140: RNCC: 5 | RNVC: 9

30 Mar 1982

5120-14-454-2455
Spanner Wrench

144542455
2002004510: RNCC: 3 | RNVC: 2
89473478: RNCC: 5 | RNVC: 2

26 Mar 1992

5120-14-401-2769
Bearing And Bushing Inserter

144012769
100684: RNCC: 3 | RNVC: 2

5 Jun 1985

5120-14-357-2692
Socket Head Screw Key

143572692
0BEP18-521815Y: RNCC: 3 | RNVC: 2

7 Jun 1979

5120-14-388-9196
Adjustable Wrench

143889196
8812803000: RNCC: 3 | RNVC: 2

29 Nov 1983

5120-14-544-0113
Open End Wrench

145440113
99-407: RNCC: 3 | RNVC: 2

22 Dec 2004

5120-14-489-3461
Hand Tube Swaging Tool Kit

144893461
853-600-304-0: RNCC: 3 | RNVC: 2

9 Jul 1997

5120-14-395-0275
Ensemble Tirants

143950275
853-201-289-0: RNCC: 3 | RNVC: 2

2 Oct 1984

5120-14-494-1425
Filtre

144941425
88205264: RNCC: 3 | RNVC: 2
F300 0T 015 7217: RNCC: 6 | RNVC: 9

15 Oct 1997

5120-14-203-1108
Screwdriver Bit

142031108
NO PRIMARY REF14-203-1108: RNCC: 3 | RNVC: 2
965-2: RNCC: 5 | RNVC: 2
14-10: RNCC: 5 | RNVC: 9
965-2: RNCC: 5 | RNVC: 9

1 Jan 1963

5120-14-407-8863
Socket Head Screw Key

144078863
62 0-9: RNCC: 3 | RNVC: 2
62-0,9: RNCC: 3 | RNVC: 2
62-0-9: RNCC: 5 | RNVC: 2
3272670213838: RNCC: 5 | RNVC: 2

5 Mar 1986

5120-14-506-1073
Spring Inserter And Remover

145061073
30337: RNCC: 3 | RNVC: 2
30337: RNCC: 5 | RNVC: 2

2 Apr 1998

5120-14-431-7805
Socket Head Screw Key

144317805
0411-60176: RNCC: 3 | RNVC: 2

10 May 1989

5120-14-454-1977
Spanner Wrench

144541977
16994084: RNCC: 3 | RNVC: 2

26 Mar 1992

5120-14-364-9921
Spanner Wrench

143649921
520408-80: RNCC: 3 | RNVC: 2

2 Sep 1980

5120-14-253-9759
Spanner Wrench

142539759
C46267: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-444-8317
Spanner Wrench

144448317
0478-203110: RNCC: 3 | RNVC: 2

23 Jan 1991

5120-14-550-7405
Open End Wrench

145507405
82177148000: RNCC: 3 | RNVC: 2

11 Jul 2006

5120-14-551-0045
Spanner Wrench

145510045
F46833: RNCC: 3 | RNVC: 2

18 Aug 2006

5120-14-532-2545
Bearing And Bushing Inserter And Remover

145322545
287029088: RNCC: 3 | RNVC: 2
702908: RNCC: 3 | RNVC: 2

23 Oct 2002

5120-14-265-6676
Electronic Crystal Unit Extractor

142656676
451082: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-443-9899
Open End Wrench

144439899
GS125-17: RNCC: 3 | RNVC: 2

18 Dec 1990

5120-14-323-4476
Tas De Rivetage

143234476
OS21130: RNCC: 3 | RNVC: 2
OMDS21130: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-572-3591
Combination Box And Open End Wrench Set

145723591
440.JU12: RNCC: 3 | RNVC: 2
3148518004626: RNCC: 5 | RNVC: 2
800462: RNCC: 5 | RNVC: 2

27 Jun 2012

5120-14-331-8681

5120-14-556-7751
Hand Hammer

145567751
383-0719: RNCC: 3 | RNVC: 2

10 Apr 2008

5120-14-244-9038
Slip Joint Pliers

142449038
835-24CH: RNCC: 3 | RNVC: 2
170EL: RNCC: 3 | RNVC: 2
M4ZS460D8107: RNCC: 5 | RNVC: 2
0715 02 71: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-326-8190
Montage Pis Douille

143268190
010-136-000: RNCC: 3 | RNVC: 2
10-136-000: RNCC: 5 | RNVC: 2

2 Jul 1975

5120-14-396-9440
Outil De Pose

143969440
8814332000: RNCC: 3 | RNVC: 2

27 Nov 1984

5120-14-552-9020
Hand Armament Subsystem Carrier

145529020
G105200: RNCC: 3 | RNVC: 2

12 Feb 2007

Load More Results