What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.

A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Blacksmith's Punch?

A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Mechanical Finger?

A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.

A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Screwdriver And Wrench Assembly?

A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Stakeholder Bench Plate?

A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.

What is a Drill Drift?

A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.

A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Digging Bar?

A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

What is a Valve Spring Lifter?

A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.

What is a Fuse Puller?

A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.

Hand Tools, Nonedged, Nonpowered - France (FR)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by France (FR) - NCB is 14

Page 36 of 110

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by France

51	20	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - France (FR)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 16 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Pipe Vise? 19 Items: A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.
What is a Hand Vise? 25 Items: A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.
What is a Hand Hydraulic Jack? 133 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 153 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 903 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 17 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
Swage,Bottom,Blacksmith's 10 Items
What is a Hand Tube Flaring Tool? 23 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Blacksmith's Punch? 12 Items: A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.
What is a Drain Plug Wrench? 45 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 57 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 16 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 3829 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
Flatter,Blacksmith's 18 Items
Swage,Top,Blacksmith's 12 Items
What is a Pipe Wrench? 110 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 149 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 53 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
Screwdriver,Offset 54 Items
What is a Screwdriver Bit? 707 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Mechanical Finger? 25 Items: A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.
What is a Socket Wrench Socket? 1803 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 1412 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 1641 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 52 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 565 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
Jack,Push-Pull,Screw 30 Items
What is a Hand Tube Bender? 54 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 1106 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 55 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pinch Bar? 19 Items: A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.
What is a Pry Bar? 17 Items: A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.
What is a Wrecking Bar? 15 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 273 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 413 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 32 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 295 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
Face,Hammer,Inserted 25 Items
What is a Hole Sheet Metal Holder? 37 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Screwdriver And Wrench Assembly? 11 Items: A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.
What is a Hand Rivet Set? 121 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Stakeholder Bench Plate? 22 Items: A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.
What is a Drill Drift? 32 Items: A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.
What is a Tack Claw? 15 Items: A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.
Mattock 28 Items
What is a Socket Wrench Handle Bar? 108 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Stake,Sheet Metalworking 50 Items
Riveter,Blind,Hand 76 Items
What is a Hand Shovel? 43 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 98 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 30 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
What is a Digging Bar? 20 Items: A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.
Block,Dolly,Sheet Metalworking 56 Items
What is a Piston Ring Compressor? 34 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Valve Spring Lifter? 29 Items: A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.
What is a Fuse Puller? 20 Items: A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.
What is a Hand Lead Seal Press? 18 Items: A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.
What is a Hand Beading Tool? 91 Items: A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.
What is a Hand Hammer? 502 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
Head,Hand Hammer 81 Items
What is a Lamp Extractor? 76 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Tube Packing Ring Installing Tool? 29 Items: A Tube Packing Ring Installing Tool (INSTALLING TOOL,TUBE PACKING RING) is an item designed to insert packing rings on tubes within tube sheets on condensers and similar heat exchangers. In operation, the packing rings are assembled on the loading pin mandrel and are then transferred from the mandrel on to the tube by means of a tubular sleeve which slides on the mandrel.
What is a Carpenters' Pincers? 18 Items: A Carpenters' Pincers (PINCERS,CARPENTERS') is a plierlike hand tool having two opposing jaws which may have hammerlike backs. One handle has a nail or tack pulling claw, the other is shaped to form a screwdriver. The tool may contain a wire cutter. See also NIPPERS, END CUTTING and PINCERS, FARRIERS'.
What is a Trowel? 33 Items: A Trowel is a tool used for bricklaying, concrete work, plastering, linoleum laying, and masonry work. Excludes CORNER TOOL, CONCRETE.
What is a Hand Abrasive Wheel Dresser? 12 Items: A Hand Abrasive Wheel Dresser (DRESSER,ABRASIVE WHEEL,HAND) is a tool designed to remove glaze from, dress, shape, sharpen, and true solid abrasive wheels. Excludes NIB, DIAMOND, WHEEL DRESSING.
What is a Lamp Cap Extractor? 32 Items: A Lamp Cap Extractor (EXTRACTOR,LAMP CAP) is a tool specifically designed to facilitate the removal of lamp caps from switchboards, panels or indicator lamps.
What is a Rivet Bucking Bar? 51 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 86 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 277 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Woven Cable Grip? 23 Items: A Woven Cable Grip (GRIP,CABLE,WOVEN) is a braided wire device designed to clutch a bare or insulated conductor, cable or wire rope, for holding taut or drawing through conduit.
What is a Screw Thread Insert Extractor? 19 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is an Electron Tube Extractor? 18 Items: An Electron Tube Extractor (EXTRACTOR,ELECTRON TUBE) is a hand tool designed to facilitate the removal of electron tubes from electronic equipment and to avoid burning the fingers. It may be used for installing tubes.
What is a Cross Tip Screwdriver? 362 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 21 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 11 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 37 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Tool Handle Wedge? 10 Items: A Tool Handle Wedge (WEDGE,TOOL HANDLE) is excludes WEDGE, WOOD.
What is a Marlinespike? 16 Items: A Marlinespike is a metal hand tool made in the shape of a tapered pin. One end is pointed and the opposite end may be headed. The body may contain an eye for a lanyard sling, or be grooved lengthwise. Excludes CABLE PICK and FID.
What is an Aligning Punch? 272 Items: An Aligning Punch (PUNCH,ALIGNING) is a round, square, hexagonal or octagonal bodied hand tool, having a round tapered section 6-1/2 inches (165.1 mm) or more in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, DRIFT and DRIFTPIN.
What is a Drift Punch? 25 Items: A Drift Punch (PUNCH,DRIFT) is a round, square, hexagonal, or octagonal bodied hand tool, having a round tapered section 4 to 6 inches (101.6 mm to 152.4 mm) inclusive in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, ALIGNING; and DRIFTPIN.
What is a Putty Knife? 36 Items: A Putty Knife (KNIFE,PUTTY) is a hand tool with a nonedged blade fixed to a handle for laying on and smoothing putty and the like.
What is a Socket Wrench Adapter-Extension? 40 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 30 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 184 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Socket Wrench Ratchet Attachment? 47 Items: A Socket Wrench Ratchet Attachment (RATCHET ATTACHMENT,SOCKET WRENCH) is a connection for socket wrenches and handles. Consists of a ratcheting mechanism with an internal drive on one end and an external drive on the opposite end of the same size. The item is designed to permit continuous rotation of the socket in one direction without removing the socket or handle and without a complete rotation of the handle.
What is a Wrench Extension Handle? 81 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Socket Wrench Crowfoot Attachment? 155 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 33 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 43 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 48 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 2394 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 372 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 300 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 661 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 32 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand-Operated Grommet And Eyelet Press? 12 Items: A Hand-Operated Grommet And Eyelet Press (PRESS,GROMMET AND EYELET,HAND-OPERATED) is a device which punches or pierces holes and in addition fastens or sets eyelets and grommets in cloth, paper and similar material. May be used for fastening or setting rivets, lacing hooks and snaps in cloth, paper and similar material. It is hand operated by lever or screw action. See also PUNCH, EYELET, PLIER TYPE and PRESS, GROMMET AND EYELET, FOOT OPERATED.
What is a Claw Bar? 19 Items: A Claw Bar (BAR,CLAW) is before using, refer to Reference Drawing Group AG.
What is a Shock Type Wheel Stud Nut Wrench? 11 Items: A Shock Type Wheel Stud Nut Wrench (WRENCH,WHEEL STUD NUT,SHOCK TYPE) is a manually operated item designed to remove wheel stud nuts. In operation the inner nut is turned by a socket attached to a shaft on which is a loose swinging weighted handle. The weighted handle may be swung quickly to provide an impact force against the socket to loosen the seized or jammed nuts. The outer nut is held stationary by a separate hexagonal holding wrench.
What is a Drift Pin Set? 30 Items: A Drift Pin Set is a group of DRIFTPIN having different characteristics.
What is a Tire Iron? 25 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 115 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Blacksmith's Vise? 14 Items: A Blacksmith's Vise (VISE,BLACKSMITH'S) is a clamping device consisting of a mounting plate, one stationary and one manual screw actuated jaw and a supporting member extending downward from the stationary jaw to the floor. Designed to be mounted on a bench, table or the like. May include pipe holding jaws.
What is a Machinist's Vise? 64 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Clamp Base Bench Vise? 10 Items: A Clamp Base Bench Vise (VISE,BENCH,CLAMP BASE) is a clamping device consisting of a base, one stationary and one manual screw actuated jaw, and one or more guide bars or rods. Designed with an integral clamp for attaching to a bench, table, or the like. Does not include pipe holding jaws.
What is a Fixed Open End Wrench Set? 86 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Nail Set? 11 Items: A Nail Set is a round knurled, square, hexagonal or octagonal bodied hand tool having a round tapered section terminating in a cupped point. It is designed to set brad head nails below the surface by striking it a hammerlike blow. See also PUNCH, DRIVE PIN.
What is a Socket Wrench Set? 202 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is an Open End Box Wrench Set? 10 Items: An Open End Box Wrench Set (WRENCH SET,OPEN END BOX) is a group of WRENCH, OPEN END BOX having different characteristics.
What is a Combination Box And Open End Wrench Set? 72 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Box Wrench Set? 36 Items: A Box Wrench Set (WRENCH SET,BOX) is a group of box wrenches having different characteristics. It may include a HANDLE, EXTENSION WRENCH. See also WRENCH SET, COMBINATION, BOX AND OPEN END.
What is a Hot Line Stick? 26 Items: A Hot Line Stick is a hand tool consisting of a straight, round stick (pole) made of a suitable nonconductive material with a tool fixed to one end. The other end may be plain or have a butt mounting device fixed to it. Various types of attachments (hooks, rings, and bands) may be fixed to the body. It is designed for use in the repair and maintenance of live high voltage aerial lines. Excludes hot line sticks without heads.
Handle,Mattock-Pick 15 Items
What is a Wrench Kit? 73 Items: A Wrench Kit is an assortment of various types and sizes of wrenches such as SOCKET, SOCKET WRENCH; WRENCH, OPEN END, FIXED; WRENCH, BOX and the like. It may include adapter(s), ratchet(s) and the like. See also WRENCH SET (as modified.
What is a Brad Awl? 15 Items: A Brad Awl (AWL,BRAD) is a small, pointed tool used by shoemakers, saddlers, cabinetmakers, and the like for piercing small holes in wood, leather, and similar materials, and consists of a handle with a ferrule and a blade. The blade is round, terminating in a beveled, sharp straight edge and has a shank which passes through the center of the handle.
What is a Scratch Awl? 20 Items: A Scratch Awl (AWL,SCRATCH) is an item whose nominal length of blade is less than 4 inches (101.6 millimeters) and is provided with a nondetachable handle.
What is a Screw Extractor Set? 10 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 102 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
Jack,Scissors,Hand 26 Items
What is a Piston Ring Expander? 23 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
Mallet,Plastic 62 Items
Mallet,Rubber 10 Items
What is a Wood Mallet? 37 Items: A Wood Mallet (MALLET,WOOD) is excludes MALLET, CALKING; MALLET, HAWSING and MALLET, SERVING.
What is a Rack Bar Jack? 30 Items: A Rack Bar Jack (JACK,RACK BAR) is excludes JACK, BUMPER and JACK, REEL, HAND.
What is a Pneumatic Tire Valve Core Inserter And Remover? 14 Items: A Pneumatic Tire Valve Core Inserter And Remover (INSERTER AND REMOVER,PNEUMATIC TIRE VALVE CORE) is a bar of steel having a small cylindrical slotted end for removing or installing a valve core in a valve stem by a screwing motion. See also REPAIR TOOL, PNEUMATIC TIRE VALVE.
What is a Hand Tube Swaging Tool Kit? 20 Items: A Hand Tube Swaging Tool Kit (SWAGING TOOL KIT,TUBE,HAND) is a hand-operated noncutting tool consisting of one or more PUNCH, TUBE SWAGING, HAND and a tube flaring bar.
What is a Hand Tube Flaring Punch? 11 Items: A Hand Tube Flaring Punch (PUNCH,TUBE FLARING,HAND) is a noncutting tool having a shaped end or section designed to flare the ends of tubes. One type is designed to flare the ends of tubes against a tube sheet, and another to flare tube ends to mate with tube fittings. Includes punch components of FLARING TOOL, TUBE, HAND.
What is a Hose Strap Band Clamping Tool? 26 Items: A Hose Strap Band Clamping Tool (CLAMPING TOOL,STRAP BAND,HOSE) is an item designed to tension and lock metal straps around a rubber hose, and the like. It is also used to clamp and hold fittings therein.
What is a Mechanical Puller? 3073 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 470 Items
What is a Slip Joint Pliers? 84 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Brake Repair Pliers? 14 Items: A Brake Repair Pliers (PLIERS,BRAKE REPAIR) is a tool having jaws designed for use in brake repair operations, such as removing and replacing items such as keys, springs, and the like. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 226 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 12 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 81 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 56 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 15 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 11 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 29 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Cross Tip Screwdriver Set? 14 Items: A Cross Tip Screwdriver Set (SCREWDRIVER SET,CROSS TIP) is a group of SCREWDRIVER, CROSS TIP having different characteristics.
What is a Spanner Wrench Set? 18 Items: A Spanner Wrench Set (WRENCH SET,SPANNER) is a group of items under WRENCH, SPANNER having different characteristics.
What is a Drive Pin Punch Set? 31 Items: A Drive Pin Punch Set (PUNCH SET,DRIVE PIN) is a group of PUNCH, DRIVE PIN having different characteristics.
What is an Aligning Punch Set? 13 Items: An Aligning Punch Set (PUNCH SET,ALIGNING) is a group of PUNCH, ALIGNING having different characteristics. See also DRIFTPIN SET.
What is a Slugging Type Box Wrench Socket? 16 Items: A Slugging Type Box Wrench Socket (SOCKET,SLUGGING TYPE BOX WRENCH) is an item having a hexagonal external drive at one end, made to fit into the internal hexagonal or 12-point opening of a slugging type box wrench. The opposite end has a single-broached hexagonal opening of the same size as the external drive. The item is designed with extra thick walls to withstand the impact of sledge blows on the driving wrench.
What is a Mechanical Puller Step Plate? 44 Items: A Mechanical Puller Step Plate (STEP PLATE,MECHANICAL PULLER) is a circular disk, flanged to provide a shoulder, and designed to provide a base for the screw point of a PULLER, MECHANICAL when pulling externally mounted bearings, gears, and the like from hollow shafts or housings. It has a concentric, countersunk hole to accommodate the puller screw point.
What is a Solid Center Punch? 79 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Cable Type Ratchet Lever Puller? 20 Items: A Cable Type Ratchet Lever Puller (PULLER,RATCHET LEVER,CABLE TYPE) is an item consisting of a metal frame and ratchet lever reel to which is attached one end of a flexible cable (wire rope). The cable feeds through the fast eye in the metal frame, and may be reeved through a slip hook tackle hook. See also BINDER, LOAD; HOIST, WIRE ROPE and STRETCHER, WIRE.
What is an Electronic Equipment Tuning Wand? 18 Items: An Electronic Equipment Tuning Wand (TUNING WAND,ELECTRONIC EQUIPMENT) is a hand-held rod used in determining the adjustment of the windings of a radio frequency coil. It is made of insulating material with iron on one end and brass on the other end. By inserting the iron end in the coil, the inductance is increased and by inserting the brass end, the inductance is decreased.
What is a Combination Open End And Spanner Wrench? 14 Items: A Combination Open End And Spanner Wrench (WRENCH,OPEN END AND SPANNER,COMBINATION) is a tool having open end wrench characteristics at one end and spanner wrench features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s) at the other end.
What is a Detent Handling Tool? 187 Items: A Detent Handling Tool (HANDLING TOOL,DETENT) is a specially designed handling tool consisting of a rigid bar with a T-handle on one end. The other end is equipped with threads designed to mate the threads of a detent to facilitate inserting or extracting.
What is a Hand Material Handling Hook? 23 Items: A Hand Material Handling Hook (HOOK,MATERIAL HANDLING,HAND) is a hook whose curved end conforms to Style AP1, AP2, AP3 or AP4 of Reference Drawing Group AP. Excludes HOOK, MANHOLE COVER, HAND; HOOK, WIRE BREAKING, HAND; HOOK, ROCK CRUSHER FEEDING, HAND; HOOK, STRAINER REMOVING, HAND and HOOKS, BAG HANDLING, HAND.
What is a Magnetic Retrieving Tool? 11 Items: A Magnetic Retrieving Tool (RETRIEVING TOOL,MAGNETIC) is a hand-operated magnetic device used to locate and pick up metallic articles, such as bolts, nuts, pins, washers, and the like, in confined spaces. It may be rigid, flexible or adjustable. Excludes FINGER, MECHANICAL.
What is a Mechanical Puller Adapter? 78 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Combination Box And Open End Box Wrench? 13 Items: A Combination Box And Open End Box Wrench (WRENCH,BOX AND OPEN END BOX,COMBINATION) is a double end wrench, box and open end box, primarily designed for removing or replacing tube fittings. The opening in the open end box may be machined at an angle from the longitudinal center line of the wrench.
What is a Screw Thread Insert Inserter? 136 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Flat Tip Screwdriver Set? 48 Items: A Flat Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP) is a group of SCREWDRIVER, FLAT TIP having different characteristics.
What is a Terminal Crimping Tool Contact Positioner? 89 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 16 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is an Adjustable Wrench? 138 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 239 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 75 Items
Handle,Shovel 10 Items
What is a Socket Wrench Spanner Attachment? 88 Items: A Socket Wrench Spanner Attachment (SPANNER ATTACHMENT,SOCKET WRENCH) is an item having an adjustable or fixed span with pin, hook, or key type end that is used to fit and turn various size retaining rings, cover plates, plugs, couplings, and like parts. Usually designed to be driven by a male driver.
What is a Retaining Ring Installation Tool? 44 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Tacker? 16 Items: A Tacker is a hand-operated, hammerlike or gunlike item without a clincher, used to drive preformed connecting elements like pins, nails or staples through one object or piece of material into another. Excludes STAPLER (as modified).
What is a Bearing And Bushing Inserter? 290 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 207 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 939 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 14 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 93 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 161 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 94 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 141 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 53 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Six Point Tip Screwdriver? 155 Items: A Six Point Tip Screwdriver (SCREWDRIVER,SIX POINT TIP) is a manual screwdriver having a single nonremoveable blade having a tip with six rounded points.
What is a Seal Inserter And Remover? 147 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 478 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is a Preformed Packing Inserter And Remover? 34 Items: A Preformed Packing Inserter And Remover (INSERTER AND REMOVER,PREFORMED PACKING) is a hand tool designed to install and remove a PACKING, PREFORMED.
What is a Pin Remover? 34 Items: A Pin Remover (REMOVER,PIN) is a hand tool designed to facilitate the removal of a pin from a hole.
What is a Pin Inserter And Remover? 13 Items: A Pin Inserter And Remover (INSERTER AND REMOVER,PIN) is a rodlike tool designed to facilitate the insertion and removal of a pin from a hole.
What is an Electrical Contact Inserter And Remover? 37 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Piston Inserter? 40 Items: A Piston Inserter (INSERTER,PISTON) is a tool designed to permit installation of a piston or piston assembly without damaging the packings or piston.
What is a Spring Inserter And Remover? 85 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 13 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Stud Inserter? 22 Items: A Stud Inserter (INSERTER,STUD) is a device designed to drive in studs. It does not have any facilities for removing or extracting studs. See also INSERTER AND REMOVER, STUD.
What is a Stud Inserter And Remover? 17 Items: A Stud Inserter And Remover (INSERTER AND REMOVER,STUD) is a group of items designed to extract and to drive studs. It may include collets, guides, housings, holders and the like. See also REMOVER SET, STUD and INSERTER, STUD.
What is a Gear Inserter? 54 Items: A Gear Inserter (INSERTER,GEAR) is a hand tool designed to install various gears onto a gearshaft. It may be operated by a pushing or a striking force.
What is a Crimping Tool Die? 73 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is an Electrical Connector Inserter? 45 Items: An Electrical Connector Inserter (INSERTER,ELECTRICAL CONNECTOR) is a hand tool designed to hold an electrical connector, and to assist in the positioning and installation of the connector on a cover, panel or the like.
What is a Float? 12 Items: A Float is a tool used for concrete, plastering and grouting work.
What is a Mechanical Puller Set? 19 Items: A Mechanical Puller Set (PULLER SET,MECHANICAL) is two or more separate PULLER, MECHANICAL of different fixed sizes.
What is a Lifting Pneumatic Bag? 11 Items: A Lifting Pneumatic Bag (PNEUMATIC BAG,LIFTING) is a device made of flexible material designed to lift another item by being placed under the item and being inflated with air or some other gas. It will have a means of being connected to an air or gas source and may include a connector hose, a control valve and/or a pressure regulator.
What is a Cable Tie Installation Tool? 22 Items: A Cable Tie Installation Tool (INSTALLATION TOOL,CABLE TIE) is a lightweight, hand-held, hand-operated tool designed to fasten cable ties, straps and the like. Cable tie is inserted into the nose of the tool flush to the cable tie head. Trigger handle tightens cable tie and cuts off any excess. These installation tools are available in a variety of sizes depending on their intended use with miniature, intermediate, standard, heavy or extra heavy cross section ties.
What is a Bearing Staking Installation Tool? 159 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
Wrench Set,Ratchet 15 Items
What is a Sealant Dispenser? 26 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Retaining Ring Pliers Set? 10 Items: A Retaining Ring Pliers Set (PLIERS SET,RETAINING RING) is a group of PLIERS, RETAINING RING having different characteristics.
What is a Hand Armament Subsystem Carrier? 52 Items: A Hand Armament Subsystem Carrier (CARRIER,ARMAMENT SUBSYSTEM,HAND) is a metallic item with a clamp device and/or space for depositing articles. It is used for transporting weapon parts during maintanence and/or repair work, such as gun barrel, automatic loader, breechblock and the like.
What is a Ring Retaining Pliers Tip Set? 13 Items: A Ring Retaining Pliers Tip Set (TIP SET,PLIERS,RING RETAINING) is a collection of removable metallic tips in matched pairs used to provide various size capablities to PLIERS, RING RETAINING which permits the removal and installation of internal and external retaining rings.
What is a Plug Electrical Connector Extractor? 45 Items: A Plug Electrical Connector Extractor (EXTRACTOR,ELECTRICAL CONNECTOR,PLUG) is a hand tool designed to disassemble CONNECTOR, PLUG, ELECTRICAL from a CONNECTOR, RECEPTACLE, ELECTRICAL.
What is a Torque Wrench Adapter Set? 10 Items: A Torque Wrench Adapter Set (ADAPTER SET,TORQUE WRENCH) is tWO or more ADAPTER, TORQUE WRENCH of different sizes.
What is an Electronic Component Inserter And Remover? 79 Items: An Electronic Component Inserter And Remover (INSERTER AND REMOVER,ELECTRONIC COMPONENT) is an item which can insert or remove an electronic component package such as MICROCIRCUIT; RESISTOR, NETWORK (as modified); and the like from its mounting position or socket. Excludes INSERTER AND REMOVER, ELECTRICAL CONTACT; REMOVER, ELECTRICAL CONTACT; EXTRACTOR, ELECTRICAL CARD; EXTRACTOR, ELECTRONIC CRYSTAL UNIT; EXTRACTOR, ELECTRON TUBE.
What is an Impact Type Bit Set And Handle Screwdriver? 14 Items: An Impact Type Bit Set And Handle Screwdriver (SCREWDRIVER,BIT SET AND HANDLE,IMPACT TYPE) is an item consisting of a set of screwdriver bits and a impact driver to accommodate the bits of various types and characteristics. It is designed to transmit a strong rotating movement by the impact of a hammer blowed on the impact driver. It is used to loosen rusted or seized screws. Excludes SCREWDRIVER, BIT SET AND HANDLE.
What is a Hand Vise Jaw? 19 Items: A Hand Vise Jaw (JAW,VISE,HAND) is an item consisting of two opposing parts of a VISE, HAND. The item is moveable and able to open and close. It can hold, grasp or clamp work.
What is a Screwdriver Handle? 28 Items: A Screwdriver Handle (HANDLE,SCREWDRIVER) is an item used to accommodate various types of BIT, SCREWDRIVER. It is designed to rotate a bit that is used for installing or removing screws.
What is a Wire Twister Pliers? 25 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 284 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is a Mechanical Puller Body? 45 Items: A Mechanical Puller Body (BODY,PULLER,MECHANICAL) is an item designed to support and enclose the internal parts of a PULLER,MECHANICAL.
What is a Flat Tip And Cross Tip Screwdriver Set? 39 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is a Socket Wrench Screwdriver Attachment Set? 22 Items: A Socket Wrench Screwdriver Attachment Set (SCREWDRIVER ATTACHMENT SET,SOCKET WRENCH) is a set of screwdriver attachment, socket wrench of different sizes. Items consist of a female square drive on one end to attach to a handle, socket wrench and various screwdriver tip configurations on the opposite end. Excludes SCREWDRIVER ATTACHMENT,SOCKET WRENCH
What is an Oil Filter Wrench? 44 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 430 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Communications Equipment Spring Adjuster? 13 Items: A Communications Equipment Spring Adjuster (ADJUSTER,SPRING,COMMUNICATIONS EQUIPMENT) is a single or double end tool, equipped with slot(s) of various dimensions or with cylindrical rod(s), used for adjusting the springs or spring tensioned parts of electronic equipment.
What is a Rotating Members Aligning Tool? 32 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
What is a Final Drive Assembly Alignment Pin? 41 Items: A Final Drive Assembly Alignment Pin (ALIGNMENT PIN,FINAL DRIVE ASSEMBLY) is a special designed pin used in the assembling of the final drive.
Arm,Handling Tool 77 Items
What is a Splicing Sleeve Compressing Tool? 23 Items: A Splicing Sleeve Compressing Tool (COMPRESSING TOOL,SPLICING SLEEVE) is a hand tool having hinged leverage handles similar to a CUTTER, BOLT or pliers, designed to compress a splicing sleeve when joining the ends of two conductors, or when forming an eye splice in the end of a wire rope. Excludes CRIMPING TOOL, TERMINAL, HAND.
What is a Hand Screw Jack Extension? 14 Items: A Hand Screw Jack Extension (EXTENSION,HAND SCREW JACK) is a length of externally threaded rigid shafting which is the adjustable section of a JACK, SCREW, HAND.
What is a Mechanical Puller Gear Adapter? 21 Items: A Mechanical Puller Gear Adapter (GEAR ADAPTER,PULLER,MECHANICAL) is an adapter that adapts a PULLER,MECHANICAL, to pull a certain gear.
Handle,Hydraulic Jack 18 Items
What is a Female Electrical Contact Resizing Tool? 11 Items: A Female Electrical Contact Resizing Tool (RESIZING TOOL,FEMALE ELECTRICAL CONTACT) is a tool designed to shape to a specific size, female contacts such as those used on electrical connectors, tube sockets, crystal sockets, and pin jacks.
What is a Screwdriver And Socket Wrench Combination? 13 Items: A Screwdriver And Socket Wrench Combination is a hand-tool formed into an integral unit with a socket wrench at one end and a screwdriver bit at the other end. See also SCREWDRIVER AND WRENCH ASSEMBLY.
What is a Hand Hose Fitting Swaging Tool Kit? 11 Items: A Hand Hose Fitting Swaging Tool Kit (SWAGING TOOL KIT,HOSE FITTING,HAND) is a device, hydraulically actuated by hand or power operated pump, consisting of face plate, adapter plate, finger cages, fingers, ram, bushing, and expanding mandrels combined on a single base in various functional arrangements. It is used for swaging the outside diameter of hose assembly fittings, expanding the inside diameter of hose assemblies, and securing the fabrication of hose assemblies. Included are a hand or power operated pump, lubricant, cases, and trays.
What is a Catch Lever Tool? 12 Items: A Catch Lever Tool (LEVER TOOL,CATCH) is a specially designed hand tool which engages the opening and closing lever of a CATCH (as modified) for ease of operation. It is constructed of thin rigid material, usually flat, and one end has an engaging tongue.
What is a Manual Impact Wrench? 11 Items: A Manual Impact Wrench (WRENCH,IMPACT,MANUAL) is a manually operated handheld tool consisting of spring-loaded handle and a power-impact head which delivers a torsional impact from either continuous movement of the handle in one direction, or by a reciprocating action. It is used in tightening and loosening fasteners, such as bolts, nuts, and the like. The item may include sockets, extensions and offset fittings, nut runners, and the like.
What is a Drift? 63 Items: A Drift is an item consisting of a tubular body fitted with replaceable tips. It is designed to insert or remove mechanical components where space is restricted.
What is a Nutdriver? 46 Items: A Nutdriver is a non-powered hand tool with a screwdriver style handle, shaft and formed female hex or square socket at driving end.
What is a Locking Device Removal Tool? 12 Items: A Locking Device Removal Tool (REMOVAL TOOL,LOCKING DEVICE) is a hand tool designed to facilitate the removal of a WASHER, KEY and a LOCKING PLATE, NUT AND BOLT.
What is a Hydraulic Fitting Crimping Tool Head? 26 Items: A Hydraulic Fitting Crimping Tool Head (HEAD,CRIMPING TOOL,HYDRAULIC FITTING) is a component of a crimping tool used to compress fittings on fluid tubes. It consists of a U-shape item, in which, are mounted different sizes of DIE, CRIMPING TOOL for tubes of various diameters.
What is a Torque Screwdriver? 11 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.
What is a Special Purpose Combination Wrench? 13 Items: A Special Purpose Combination Wrench (WRENCH,COMBINATION,SPECIAL PURPOSE) is a tool having a combination of ends and facets. The ends may have open end, box or spanner characteristics. The sides may have features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s). Designed to fit specific items, not sized as standard or metric.
What is a Screwdriver Bit Holder? 56 Items: A Screwdriver Bit Holder (HOLDER,SCREWDRIVER BIT) is an attachment with a socket end for accepting male hexagon shank insert bits and a drive end for adapting to a portable power or hand tool.
What is a Telescoping Pole? 16 Items: A Telescoping Pole (POLE,TELESCOPING) is an item which is designed to be extended or compressed by the sliding of overlapping sections. This item may or may not be able to accommodate an extension.

Stock Items From Supply Class 5120 Page 36 of 110

5120-14-489-0299
Flat Tip Screwdriver

144890299
AZF.5,5X100: RNCC: 3 | RNVC: 2
3148510134260: RNCC: 5 | RNVC: 2
8050093C00: RNCC: 5 | RNVC: 2
250-5743: RNCC: 5 | RNVC: 2
0013426: RNCC: 5 | RNVC: 9
FACOMAZF.5,5X100: RNCC: 5 | RNVC: 9

18 Jun 1997

5120-14-493-7009

5120-14-493-3275
Cle Collect

144933275
008522001S: RNCC: 3 | RNVC: 2
F300 0T 012 2681: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-286-6576
Cle A Douille A Erg

142866576
MZ8-106: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-358-5615
Cross Tip Screwdriver

143585615
NO PRIMARY REF14-358-5615: RNCC: 3 | RNVC: 2
AD1: RNCC: 5 | RNVC: 2
91314500: RNCC: 5 | RNVC: 2
AD.1: RNCC: 5 | RNVC: 2
0004300: RNCC: 5 | RNVC: 2

7 Sep 1979

5120-14-441-4681
Socket Wrench Extension

144414681
GS84: RNCC: 3 | RNVC: 2
GS81-05: RNCC: 5 | RNVC: 2

29 Aug 1990

5120-14-256-6012
Socket Head Screw Key

142566012
82-18: RNCC: 3 | RNVC: 2
83-18: RNCC: 5 | RNVC: 9

1 Jan 1969

5120-14-210-9818
Retaining Ring Pliers

142109818
179-16: RNCC: 3 | RNVC: 2
101529: RNCC: 5 | RNVC: 2

1 Jan 1964

5120-14-343-9737
Hand Terminal Crimping Tool

143439737
NO PRIMARY REF14-343-9737: RNCC: 3 | RNVC: 2
28: RNCC: 5 | RNVC: 9
85-598-8571: RNCC: 6 | RNVC: 9

13 Jul 1977

5120-14-244-4140
Socket Wrench Socket

142444140
J-19: RNCC: 3 | RNVC: 2
J19: RNCC: 3 | RNVC: 2
3272670209527: RNCC: 5 | RNVC: 2
74J19: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-274-8652
Pince-Joint

142748652
R31674-7-18REP5BIS: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-300-9662
Mechanical Puller Attachment

143009662
341A93-3514-23: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-530-2079
Combination Box And Open End Wrench Set

145302079
MOD.40-1PB: RNCC: 3 | RNVC: 2

22 May 2002

5120-14-497-4377
Cle

5120-14-440-0687
Boite Repar.Inject.

144400687
99250901801: RNCC: 3 | RNVC: 2

10 Jul 1990

5120-14-451-8299
Outil Reglage Cames

144518299
4202556N001: RNCC: 3 | RNVC: 2

4 Dec 1991

5120-14-263-2654

5120-14-236-8777
Spanner Wrench

142368777
0830-78: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-556-9811
Woven Cable Grip

145569811
78000224: RNCC: 3 | RNVC: 2

25 Apr 2008

5120-14-298-2658

5120-14-478-5859
Outil Dextraction

144785859
483249-1: RNCC: 3 | RNVC: 2

8 Nov 1995

5120-14-530-2101
Fixed Open End Wrench Set

145302101
MOD.44-2PB: RNCC: 3 | RNVC: 2

22 May 2002

5120-14-240-4781

5120-14-540-9869
Blind Riveter Nosepiece

145409869
359-E-32: RNCC: 3 | RNVC: 2
359E32: RNCC: 5 | RNVC: 2

5 May 2004

5120-14-406-6212
Socket Wrench Crowfoot Attachment

144066212
853-100-190-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-332-5596
Bloc Serrag Mat Rot

143325596
3160S95-66-080: RNCC: 3 | RNVC: 2
85-688-3850: RNCC: 6 | RNVC: 9

2 Jul 1975

5120-14-299-4501
Pince Sert Con Elec

142994501
69241-1: RNCC: 3 | RNVC: 2
69241: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-447-8715
Open End Wrench

144478715
10-16X18-P: RNCC: 3 | RNVC: 2
3272670215221: RNCC: 5 | RNVC: 2
91628978: RNCC: 5 | RNVC: 2
10-16X18P: RNCC: 5 | RNVC: 2
10-16X18CP: RNCC: 5 | RNVC: 9

6 Jun 1991

5120-14-524-6716

5120-14-461-3316
Bague Demontage

144613316
31080: RNCC: 3 | RNVC: 2

8 Mar 1993

5120-14-461-8143
Positionn Outillage

144618143
79801944: RNCC: 3 | RNVC: 2

29 Mar 1993

5120-14-395-1879

5120-14-310-7319
Mandrin De Montage

143107319
MAS4687: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-479-4142
Poignee Pilote Cle

144794142
M31-155: RNCC: 3 | RNVC: 2
M31155: RNCC: 5 | RNVC: 2

10 Jan 1996

5120-14-297-7688
Spanner Wrench

142977688
6800-2211: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-041-8327
Female Electrical Contact Resizing Tool

140418327
DF92-302-61-5: RNCC: 3 | RNVC: 2
9DF92-302-61-5: RNCC: 5 | RNVC: 2

1 Jan 1974

5120-14-501-0312
Socket Wrench Socket

145010312
K-21HA: RNCC: 3 | RNVC: 2
K21HA: RNCC: 3 | RNVC: 2
3148510300030: RNCC: 5 | RNVC: 2
F300 0T 025 0611: RNCC: 6 | RNVC: 9

29 Oct 1997

5120-14-413-5826
Socket Head Screw Key

144135826
803-6: RNCC: 3 | RNVC: 2
803-6: RNCC: 5 | RNVC: 2
80306: RNCC: 5 | RNVC: 2

17 Dec 1986

5120-14-456-8483
Hand Terminal Crimping Tool

144568483
482327-1: RNCC: 3 | RNVC: 2
85-694-6225: RNCC: 6 | RNVC: 9

24 Jul 1992

5120-14-392-0516
Etau Support

143920516
MFG439-21: RNCC: 3 | RNVC: 2

21 Mar 1984

5120-14-563-1922
Spanner Wrench

145631922
522391: RNCC: 3 | RNVC: 2
14100066736: RNCC: 5 | RNVC: 2

13 Jan 2010

5120-14-496-5053
Cric Modifie

5120-14-499-9664

5120-14-530-2082
Socket Head Screw Key

145302082
83H.12: RNCC: 3 | RNVC: 2
3148511241219: RNCC: 5 | RNVC: 2

22 May 2002

5120-14-551-0188
Spanner Wrench

145510188
F46829: RNCC: 3 | RNVC: 2

21 Aug 2006

5120-14-466-3759
Spanner Wrench

144663759
M47083: RNCC: 3 | RNVC: 2

3 Nov 1993

5120-14-379-4432
Face Spanner Wrench Socket

143794432
A33289J: RNCC: 3 | RNVC: 2

1 Oct 1982

5120-14-286-6574
Spanner Wrench

142866574
MZ254: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-316-5851
Outil Montage Demon

143165851
0S20194: RNCC: 3 | RNVC: 2
0MDS20194: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-276-8710
Capuchon De Flamme

142768710
24-1158: RNCC: 3 | RNVC: 2
DL24-1158: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-574-1488
Socket Head Screw Key

145741488
67-5A: RNCC: 3 | RNVC: 2

11 Dec 2012

5120-14-450-7489
Cross Tip Screwdriver

144507489
NO PRIMARY REF14-450-7489: RNCC: 3 | RNVC: 2
643300: RNCC: 5 | RNVC: 9
EPH3.8X150: RNCC: 5 | RNVC: 9

22 Oct 1991

5120-14-315-0483
Spanner Wrench

143150483
7742-1000: RNCC: 3 | RNVC: 9

1 Jan 1975

5120-14-297-7666
Spanner Wrench

142977666
6800-2066: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-210-9854
Socket Wrench Socket

142109854
J.17H: RNCC: 3 | RNVC: 2
3148510274904: RNCC: 5 | RNVC: 2
J.17H: RNCC: 5 | RNVC: 2
J17H: RNCC: 5 | RNVC: 2
0713 121 117: RNCC: 5 | RNVC: 2
0027490: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-531-6324
Socket Wrench Socket

145316324
S.12F: RNCC: 3 | RNVC: 2
3148510538068: RNCC: 5 | RNVC: 2

5 Sep 2002

5120-14-249-9440
Socket Wrench Socket

142499440
M.55: RNCC: 3 | RNVC: 2
3148510317502: RNCC: 5 | RNVC: 2
M55: RNCC: 5 | RNVC: 2
0031750: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-436-4708
Dextraction Vis

144364708
853-202-612-0: RNCC: 3 | RNVC: 2

3 Jan 1990

5120-14-574-1464
Socket Head Screw Key

145741464
67-3A: RNCC: 3 | RNVC: 2

11 Dec 2012

5120-14-439-8917
Support De Coeur

144398917
44558: RNCC: 3 | RNVC: 2

1 Jun 1990

5120-14-475-1004
Teton Dog Point

144751004
45040406: RNCC: 3 | RNVC: 9

17 Mar 1995

5120-14-221-8830
Cle Verin Atterriss

142218830
PR46149: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-280-9684

5120-14-333-3038

5120-14-576-3629
Socket Wrench

145763629
8814225103: RNCC: 3 | RNVC: 2

13 Jun 2013

5120-14-325-3878
Rodoir De Robinet

143253878
PT763D: RNCC: 3 | RNVC: 2
PT763: RNCC: 5 | RNVC: 9

2 Jul 1975

5120-14-557-7288
Socket Wrench

145577288
MUP 6344: RNCC: 3 | RNVC: 2

7 Jul 2008

5120-14-410-6702
Outil De Reglage

144106702
39086923: RNCC: 3 | RNVC: 2
39086923: RNCC: 5 | RNVC: 9

9 Jul 1986

5120-14-207-4918
Bras De Rotation

142074918
3X76: RNCC: 3 | RNVC: 2

1 Jan 1964

5120-14-357-4341

5120-14-280-1435

5120-14-477-6499
Guide

144776499
N9860000046: RNCC: 1 | RNVC: 2
P608231: RNCC: 3 | RNVC: 2

13 Sep 1995

5120-14-517-4441
Open End Wrench

145174441
GS120-32X36: RNCC: 3 | RNVC: 2
1.70.1028: RNCC: 5 | RNVC: 2

15 Dec 1999

5120-14-041-5129
Cle A Virer

140415129
45-414-92-10: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-249-6805
Extracteur Special

142496805
2-02666-00: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-304-3151
Cone De Montage

143043151
S16-0607-1921: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-263-8222
Crochet Deverouilla

142638222
NO PRIMARY REF14-263-8222: RNCC: 3 | RNVC: 2
296921: RNCC: 5 | RNVC: 9

1 Jan 1970

5120-14-031-5523

5120-14-505-8749

5120-14-432-3891
Spanner Wrench

144323891
548501: RNCC: 3 | RNVC: 2
00548501: RNCC: 5 | RNVC: 2

7 Jun 1989

5120-14-456-8203
Bearing And Bushing Remover

144568203
45057156: RNCC: 3 | RNVC: 2
45057156: RNCC: 5 | RNVC: 9

24 Jul 1992

5120-14-321-7506
Combination Box And Open End Wrench Set

143217506
40.JE16T: RNCC: 3 | RNVC: 2
3148515284007: RNCC: 5 | RNVC: 2
40JE16T: RNCC: 5 | RNVC: 2
1034682Y00: RNCC: 5 | RNVC: 2
0528400: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-454-6806
Socket Head Screw Key

144546806
438353: RNCC: 3 | RNVC: 2
438353: RNCC: 5 | RNVC: 9

9 Apr 1992

5120-14-552-0240
Screwdriver Bit

145520240
ES.218: RNCC: 3 | RNVC: 2
3148510246680: RNCC: 3 | RNVC: 2
ES.218: RNCC: 5 | RNVC: 2

21 Nov 2006

5120-14-425-9663
Bearing And Bushing Inserter

144259663
6230: RNCC: 3 | RNVC: 2
541662: RNCC: 5 | RNVC: 2

28 Jul 1988

5120-14-455-8784
Face Spanner Wrench Socket

144558784
45689442: RNCC: 3 | RNVC: 2

11 Jun 1992

5120-14-293-4461
Spanner Wrench

142934461
8810565000: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-277-3512
Spanner Wrench

142773512
8810476001: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-439-9083
Screw Push-Pull Jack

144399083
228569: RNCC: 3 | RNVC: 9

5 Jun 1990

5120-14-539-2620
Mechanical Puller Body

145392620
T632G3005221: RNCC: 3 | RNVC: 2

17 Dec 2003

5120-14-520-6903
Spanner Wrench

145206903
32117300314: RNCC: 3 | RNVC: 2
SDM32117300314: RNCC: 5 | RNVC: 9

31 May 2000

5120-14-537-9054
Socket Wrench Socket

145379054
10507297: RNCC: 3 | RNVC: 2

3 Dec 2003

5120-14-543-1323
Retaining Ring Pliers Set

145431323
P7PB: RNCC: 3 | RNVC: 2

26 Aug 2004

5120-14-538-8739
Spanner Wrench

145388739
NGM0021040409254: RNCC: 2 | RNVC: 2

9 Dec 2003

5120-14-206-1513

5120-14-428-4914
Bearing And Bushing Inserter And Remover

144284914
46MS047-19: RNCC: 3 | RNVC: 2

8 Dec 1988

5120-14-402-7168
Cle Speciale Serrag

144027168
044U50-699793E: RNCC: 3 | RNVC: 2
0699793E00: RNCC: 5 | RNVC: 2

19 Jul 1985

5120-14-368-5060
Socket Wrench Socket

143685060
234700-78: RNCC: 3 | RNVC: 2
TF10A32418: RNCC: 5 | RNVC: 2
85-689-7922: RNCC: 6 | RNVC: 9

20 Feb 1981

5120-14-366-7429
Cle A Excentrique

143667429
J00750-02-5300: RNCC: 3 | RNVC: 2

20 Nov 1980

5120-14-444-9170
Pliers

144449170
MS27534-22D: RNCC: 3 | RNVC: 2
0239704A00: RNCC: 5 | RNVC: 2

28 Jan 1991

5120-14-424-3427
Socket Head Screw Key

144243427
E74331A8U: RNCC: 2 | RNVC: 2
E74331-8AU: RNCC: 5 | RNVC: 2

19 May 1988

5120-14-462-9874
Spanner Wrench

144629874
15492J: RNCC: 3 | RNVC: 2
85-694-8276: RNCC: 6 | RNVC: 9

12 May 1993

5120-14-204-3025
Adaptateur Special

142043025
M6-075-090: RNCC: 3 | RNVC: 2

1 Jan 1963

5120-14-416-5120
Spanner Wrench

144165120
7527-21400: RNCC: 3 | RNVC: 2

10 Jun 1987

5120-14-237-2412
Appareil De Demonta

142372412
422961: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-284-9910
Socket Wrench Adapter

142849910
S.237: RNCC: 3 | RNVC: 2
3148510582009: RNCC: 5 | RNVC: 2
91379366: RNCC: 5 | RNVC: 2
3059001170: RNCC: 5 | RNVC: 2
S237: RNCC: 5 | RNVC: 2
0176975M00: RNCC: 5 | RNVC: 2
0058200: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-309-7631
Cle Extraction Tube

143097631
RT13247: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-243-6156

5120-14-373-6777
Depose Carter Cle

143736777
225779: RNCC: 3 | RNVC: 2

13 Nov 1981

5120-14-567-1510
Retaining Ring Pliers

145671510
177A.18: RNCC: 3 | RNVC: 2
3148518232180: RNCC: 5 | RNVC: 2
823218: RNCC: 5 | RNVC: 2

16 Feb 2011

5120-14-571-6981
Ratchet Wrench

145716981
67.18: RNCC: 3 | RNVC: 2

24 Apr 2012

5120-14-409-3087
Controle Pmh

144093087
DLP751140: RNCC: 3 | RNVC: 2

27 May 1986

5120-14-299-2529

5120-14-363-1788
Mallette Verificati

143631788
RT13816B: RNCC: 3 | RNVC: 2
85-691-1980: RNCC: 6 | RNVC: 9

3 Apr 1980

5120-14-386-1641
Out Reglage Tabs

143861641
703A94-1130-00: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-259-4785

5120-14-212-9140

5120-14-559-9537
Socket Wrench Socket

145599537
14100037609: RNCC: 3 | RNVC: 2

9 Mar 2009

5120-14-222-1408

5120-14-370-3480
Manual Control Lever

143703480
170-000: RNCC: 3 | RNVC: 2
FOE170-000: RNCC: 5 | RNVC: 9

18 May 1981

5120-14-384-7343
Electrical Card Extractor

143847343
NO PRIMARY REF14-384-7343: RNCC: 3 | RNVC: 2
16931967: RNCC: 5 | RNVC: 9

2 Jun 1983

5120-14-472-2165
Bearing And Bushing Remover

144722165
ZS1038-30: RNCC: 3 | RNVC: 2
V0KBA: RNCC: 5 | RNVC: 2
132077: RNCC: 5 | RNVC: 2
ZINZS1038-30: RNCC: 5 | RNVC: 9

12 Oct 1994

5120-14-377-6251
Socket Head Screw Key

143776251
82H.035: RNCC: 3 | RNVC: 2
0123310: RNCC: 5 | RNVC: 2
0123311: RNCC: 5 | RNVC: 2
3148511233115: RNCC: 5 | RNVC: 2
82-035: RNCC: 5 | RNVC: 2
82.035: RNCC: 5 | RNVC: 2

10 Jun 1982

5120-14-304-1831
Furnace And Flue Wire Brush

143041831
NO PRIMARY REF14-304-1831: RNCC: 3 | RNVC: 2
1436-250MM: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-333-3852

5120-14-490-8974
Chasse

144908974
4067 920 002 138: RNCC: 3 | RNVC: 2
F300 0T 000 5267: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-316-5568
Face Spanner Wrench Socket

143165568
321A97-3123-00: RNCC: 3 | RNVC: 2
321-97-3123-00: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-256-7591
Open End Wrench

142567591
NO PRIMARY REF14-256-7591: RNCC: 3 | RNVC: 2
0102440: RNCC: 5 | RNVC: 2
44-22X23: RNCC: 5 | RNVC: 2
44.22X23: RNCC: 5 | RNVC: 2
0110764R00: RNCC: 5 | RNVC: 2
10-22X23C: RNCC: 5 | RNVC: 2
91460811: RNCC: 5 | RNVC: 2

1 Jan 1969

5120-14-283-3896
Mechanical Puller Attachment

142833896
9970-111-128: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-386-9451
Cle De Rearmement

143869451
C3388-018: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-401-5651
Bearing And Bushing Remover

144015651
350A93-3704-00: RNCC: 3 | RNVC: 2

13 Jun 1985

5120-14-314-6089

5120-14-513-7387
Flat Tip Screwdriver

145137387
ENFD6560-1-2X6-5X150: RNCC: 3 | RNVC: 2

9 Apr 1999

5120-14-462-9846
Distributeur Tr Cle

144629846
T700A3299000004: RNCC: 3 | RNVC: 2

12 May 1993

5120-14-393-8816

5120-14-325-4826
Mise En Forme Cone

143254826
S16-0605-0871: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-574-4311
Bearing And Bushing Inserter And Remover

145744311
8817544200: RNCC: 3 | RNVC: 2

18 Jan 2013

5120-14-461-8141
Plug Electrical Connector Extractor

144618141
MP6816-14: RNCC: 3 | RNVC: 2

29 Mar 1993

5120-14-545-9821
Socket Wrench Socket

145459821
FRF890-001S236: RNCC: 3 | RNVC: 2

1 Jun 2005

5120-14-278-7823
Socket Head Screw Key Set

142787823
NO PRIMARY REF14-278-7823: RNCC: 3 | RNVC: 2
82.JU10: RNCC: 5 | RNVC: 2
82JU10: RNCC: 5 | RNVC: 2
91360333: RNCC: 5 | RNVC: 2
089151388: RNCC: 5 | RNVC: 2
0532740: RNCC: 5 | RNVC: 2
53274082JU10: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-210-9877
Open End Wrench

142109877
33-20X22: RNCC: 3 | RNVC: 2

1 Jan 1964

5120-14-204-8891
Quick Adjusting Screw Clamp

142048891
NO PRIMARY REF14-204-8891: RNCC: 3 | RNVC: 2
703-2000: RNCC: 5 | RNVC: 9

1 Jan 1963

5120-14-548-6563
Socket Wrench Socket

145486563
S.28HLA: RNCC: 3 | RNVC: 2
00.49.46.96: RNCC: 5 | RNVC: 2

30 Jan 2006

5120-14-448-9609
Spring Inserter And Remover

144489609
T.11: RNCC: 3 | RNVC: 2
3148510593906: RNCC: 5 | RNVC: 2
T11: RNCC: 5 | RNVC: 2
0059390: RNCC: 5 | RNVC: 9

24 Jul 1991

5120-14-549-4325
Leveling-Support Jack

145494325
23853495-7: RNCC: 3 | RNVC: 2

3 Apr 2006

5120-14-521-5316
Socket Wrench Socket

145215316
K.29HA: RNCC: 3 | RNVC: 2
K29HA: RNCC: 5 | RNVC: 2
435546: RNCC: 5 | RNVC: 2

9 Aug 2000

5120-14-276-3193
Socket Wrench Socket

142763193
S7-8: RNCC: 3 | RNVC: 2
65L7-8: RNCC: 3 | RNVC: 2
S-7/8: RNCC: 3 | RNVC: 2
S7-8: RNCC: 3 | RNVC: 2
S7-8: RNCC: 3 | RNVC: 9
3148510545202: RNCC: 5 | RNVC: 2
SYQ5208: RNCC: 5 | RNVC: 2
3272670278714: RNCC: 5 | RNVC: 2
DEMS7-8: RNCC: 5 | RNVC: 9
75S7-8: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-424-1411
Six Point Tip Screwdriver

144241411
0004010: RNCC: 3 | RNVC: 2
ACHX30: RNCC: 5 | RNVC: 2
ACHX.30: RNCC: 5 | RNVC: 2
16400433-3: RNCC: 5 | RNVC: 2

18 May 1988

5120-14-554-9149
Cross Tip Screwdriver

145549149
EL 2 TVI 10 00 10: RNCC: 3 | RNVC: 2

7 Sep 2007

5120-14-532-0310
Socket Wrench Handle

145320310
52765: RNCC: 3 | RNVC: 2
3148510527659: RNCC: 5 | RNVC: 2
R.229: RNCC: 5 | RNVC: 2

9 Oct 2002

5120-14-483-1217
Socket Wrench Socket

144831217
JB.1/4: RNCC: 3 | RNVC: 2
3148510291413: RNCC: 5 | RNVC: 2
0029141: RNCC: 5 | RNVC: 9

9 Aug 1996

5120-14-514-6978
Socket Wrench Socket

145146978
R.11E: RNCC: 3 | RNVC: 2

9 Jun 1999

5120-14-564-4458
Hole Sheet Metal Holder

145644458
50001040: RNCC: 3 | RNVC: 2
191629585: RNCC: 5 | RNVC: 2

29 Apr 2010

5120-14-465-9553
Vise Jaw Caps

144659553
125G: RNCC: 3 | RNVC: 2
DOL125G: RNCC: 5 | RNVC: 9

22 Oct 1993

5120-14-333-3169
Screwdriver Bit Set And Handle

143333169
NS261U: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-470-9285
Spanner Wrench

144709285
4903660025: RNCC: 3 | RNVC: 2
4TM0518A: RNCC: 3 | RNVC: 2

13 Jul 1994

5120-14-354-6758
Emmanche Siege Soup

143546758
25545857400: RNCC: 3 | RNVC: 2
255458574: RNCC: 5 | RNVC: 9

31 Jan 1979

5120-14-373-4926
Mandrin Special

143734926
214973: RNCC: 3 | RNVC: 2

21 Oct 1981

5120-14-248-7449

5120-14-344-3252

5120-14-396-1843
Centrage Pion Cle

143961843
0441MOFA406422: RNCC: 3 | RNVC: 2
0441M0FA406422: RNCC: 5 | RNVC: 2

27 Nov 1984

5120-14-247-8211

5120-14-369-7341
Terminal Crimping Tool Contact Positioner

143697341
8292-10: RNCC: 3 | RNVC: 2

17 Apr 1981

5120-14-572-3565
Combination Box And Open End Wrench

145723565
440.9/16: RNCC: 3 | RNVC: 2
3148517683198: RNCC: 5 | RNVC: 2
768319: RNCC: 5 | RNVC: 2

27 Jun 2012

5120-14-225-3983

5120-14-491-0154
Cle

144910154
4602 007 200 121: RNCC: 3 | RNVC: 2
F300 0T 001 0941: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-546-9022
Solid Center Punch

145469022
407-10: RNCC: 3 | RNVC: 2
230/781/5: RNCC: 5 | RNVC: 2

5 Sep 2005

5120-14-385-3471
Bearing And Bushing Inserter

143853471
6805P33-6125-00: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-300-9513
Ensemble Tete Verin

143009513
341A91-0057-00: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-559-4989
Socket Wrench Screwdriver Attachment

145594989
8815349000: RNCC: 3 | RNVC: 2

20 Jan 2009

5120-14-376-2281

5120-14-424-3407
Socket Head Screw Key

144243407
E74331-7NL: RNCC: 2 | RNVC: 2

19 May 1988

5120-14-462-3766
Socket Head Screw Key

144623766
T20-13I2A8: RNCC: 3 | RNVC: 2
517823: RNCC: 5 | RNVC: 2

15 Apr 1993

5120-14-272-3584
Spanner Wrench

142723584
E74323B90AGW: RNCC: 2 | RNVC: 2
30-921-67: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-384-7529
Electrical Card Extractor

143847529
NO PRIMARY REF14-384-7529: RNCC: 3 | RNVC: 2
16931931: RNCC: 5 | RNVC: 9

2 Jun 1983

5120-14-411-5124
Open End Wrench

144115124
201537-00000: RNCC: 3 | RNVC: 2

6 Aug 1986

5120-14-541-1575
Six Point Tip Screwdriver

145411575
AZSH.5: RNCC: 3 | RNVC: 2

14 May 2004

5120-14-404-0604

5120-14-529-3758
Cle Courte

5120-14-200-4440

5120-14-389-2190
Emb Cle Fourc Adapt

143892190
M34020: RNCC: 3 | RNVC: 2
85-692-3947: RNCC: 6 | RNVC: 9

29 Nov 1983

5120-14-457-5510
Ensemb.Cle A Virer

144575510
33237: RNCC: 3 | RNVC: 2

10 Sep 1992

5120-14-392-5667

5120-14-392-0881

5120-14-282-8251

5120-14-368-6799
Combination Box And Open End Wrench

143686799
40.36L: RNCC: 3 | RNVC: 2
50-36: RNCC: 3 | RNVC: 2
3148511011577: RNCC: 5 | RNVC: 2
0224472G00: RNCC: 5 | RNVC: 2
3272670232648: RNCC: 5 | RNVC: 2
CAE00878: RNCC: 5 | RNVC: 2
40-36L: RNCC: 5 | RNVC: 2
91453734: RNCC: 5 | RNVC: 2
0101157: RNCC: 5 | RNVC: 9
40-36: RNCC: 5 | RNVC: 9

20 Feb 1981

5120-14-330-4683
Cible Broche Coudee

143304683
Z1-72-86: RNCC: 3 | RNVC: 9
Z1728-6: RNCC: 5 | RNVC: 9
Z17286: RNCC: 5 | RNVC: 9

2 Jul 1975

5120-14-378-5530
Socle Redressage

143785530
6802J34-1003-00: RNCC: 3 | RNVC: 2
6802360-34-1003-00: RNCC: 5 | RNVC: 2

11 Aug 1982

5120-14-319-4285
Drift

143194285
0M00137-6: RNCC: 3 | RNVC: 2
85-686-0698: RNCC: 6 | RNVC: 9

1 Jan 1975

5120-14-575-0696
Seal Inserter And Remover

145750696
TM2984G003: RNCC: 3 | RNVC: 2

12 Mar 2013

5120-14-344-1286
Decalamina Grattoir

143441286
8811580300: RNCC: 3 | RNVC: 2

13 Jul 1977

5120-14-567-0465
Cross Tip Screwdriver

145670465
AWPH4X200: RNCC: 3 | RNVC: 2
3148517742925: RNCC: 5 | RNVC: 2
774292: RNCC: 5 | RNVC: 2

2 Feb 2011

5120-14-292-8776

5120-14-399-1820
Socket Head Screw Key Set

143991820
63AN-8A: RNCC: 3 | RNVC: 2
63AN8A: RNCC: 3 | RNVC: 2
3272670266452: RNCC: 5 | RNVC: 2

6 Mar 1985

5120-14-514-1195
Open End Wrench

145141195
ENFD29451-12X13: RNCC: 3 | RNVC: 2

27 Apr 1999

5120-14-238-4850
Open End Wrench

142384850
13-1P0UCEX1P0UCE5-16: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-274-8351
Abrasive Wheel Dresser Cutters

142748351
5488-10M0LETTES: RNCC: 3 | RNVC: 2
4711-10M0LETTESJEU: RNCC: 3 | RNVC: 9

1 Jan 1971

5120-14-521-2258
Open End Wrench

145212258
199-22811-000: RNCC: 3 | RNVC: 2
199-22811-000: RNCC: 3 | RNVC: 2
199-22811-000: RNCC: 5 | RNVC: 2
199-22811-000: RNCC: 5 | RNVC: 2

12 Jul 2000

5120-14-441-6327
Socket Wrench Handle Bar

144416327
332A91-2410-105: RNCC: 3 | RNVC: 2

5 Sep 1990

5120-14-385-3367
Mechanical Puller Attachment

143853367
365A93-3345-21: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-434-3554
Retaining Ring Pliers

144343554
NO PRIMARY REF14-434-3554: RNCC: 3 | RNVC: 2
177.18: RNCC: 5 | RNVC: 2
0140740: RNCC: 5 | RNVC: 2

20 Sep 1989

5120-14-374-0897
Montage Outil

143740897
UFG301-21: RNCC: 3 | RNVC: 2

8 Dec 1981

5120-14-529-4253
Face Spanner Wrench Socket

145294253
6401LOC005: RNCC: 3 | RNVC: 2

29 Mar 2002

5120-14-363-8595
Spanner Wrench

143638595
8811239002: RNCC: 3 | RNVC: 2

7 Aug 1980

5120-14-238-1393
Spanner Wrench

142381393
958773: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-371-5659

5120-14-370-3175

5120-14-385-3340
Guide Montage Socle

143853340
365A93-3113-24: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-219-3477
Cle Speciale

142193477
58649: RNCC: 3 | RNVC: 2
V2-95-613: RNCC: 5 | RNVC: 2

1 Jan 1965

5120-14-490-6963
Knife

144906963
241 K 00565 000: RNCC: 3 | RNVC: 2
F300 0T 000 1102: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-243-9295
Outillage Montage A

142439295
160-88998: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-442-8280
Cross Tip Screwdriver

144428280
GS205-4: RNCC: 3 | RNVC: 2
GS205-04: RNCC: 5 | RNVC: 2
1.70.3330: RNCC: 5 | RNVC: 2

6 Nov 1990

5120-14-511-3879
Six Point Tip Screwdriver

145113879
ACZX.25X100: RNCC: 3 | RNVC: 2
0613 256 25: RNCC: 5 | RNVC: 2
AZXH.25X100: RNCC: 5 | RNVC: 2
0613 255 25: RNCC: 5 | RNVC: 2
13474: RNCC: 5 | RNVC: 2
3148510134741: RNCC: 5 | RNVC: 2
ACZX-25X100: RNCC: 5 | RNVC: 2

16 Dec 1998

5120-14-430-3263
Screwdriver Bit

144303263
BNAE-8MM: RNCC: 3 | RNVC: 2
0232404T00: RNCC: 5 | RNVC: 2
BNAE-8MM: RNCC: 5 | RNVC: 9

15 Mar 1989

5120-14-430-0855
Spanner Wrench

144300855
6814-58786: RNCC: 3 | RNVC: 2

1 Mar 1989

5120-14-561-2442
Torque Wrench Adapter

145612442
98F49208240001: RNCC: 3 | RNVC: 2

29 Jun 2009

5120-14-321-7387

5120-14-490-6836
Counter

144906836
240 C 01241 030: RNCC: 3 | RNVC: 2
F300 0T 000 0938: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-515-4484
Plug Electrical Connector Extractor

145154484
27317229-7: RNCC: 3 | RNVC: 2

13 Jul 1999

5120-14-551-0097
Socket Wrench Socket Set

145510097
S.405E: RNCC: 3 | RNVC: 2

21 Aug 2006

5120-14-490-8790
Tournev

144908790
4065 200 000 679: RNCC: 3 | RNVC: 2
F300 0T 000 5060: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-348-0517
Ergot De Cle

143480517
C46807-2: RNCC: 3 | RNVC: 2

29 Mar 1978

5120-14-218-6719

5120-14-498-1749

5120-14-244-7955
Spanner Wrench

142447955
NO PRIMARY REF14-244-7955: RNCC: 3 | RNVC: 2
40813: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-386-9731
Outil Pr Montage

143869731
26545907800: RNCC: 3 | RNVC: 2
26.545.9078.00: RNCC: 5 | RNVC: 2
26545907800: RNCC: 5 | RNVC: 2
311855-01: RNCC: 5 | RNVC: 2
31185501: RNCC: 5 | RNVC: 2
265459078: RNCC: 5 | RNVC: 9

24 Aug 1983

5120-14-443-6334
Banc Contr Etan Bp

144436334
NO PRIMARY REF14-443-6334: RNCC: 3 | RNVC: 2
OU134994: RNCC: 5 | RNVC: 9

30 Nov 1990

5120-14-285-6422

5120-14-283-9733

5120-14-304-3122
Plaque De Retreint

143043122
C46945: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-277-0326

5120-14-263-1183
Dispositif De Recti

142631183
D0M459A: RNCC: 3 | RNVC: 2
D0M459A: RNCC: 5 | RNVC: 9

1 Jan 1970

5120-14-394-1882
Kit De Montage

143941882
15309-4-0795-768-0: RNCC: 3 | RNVC: 2

23 Jun 1984

5120-14-378-8448
Outil Dextraction

143788448
UGB233-47: RNCC: 3 | RNVC: 2
UGB233-47: RNCC: 5 | RNVC: 2

11 Aug 1982

5120-14-412-0415
Manche

144120415
DLP753906: RNCC: 3 | RNVC: 2

26 Sep 1986

5120-14-572-3908
Pneumatic Tire Valve Repair Tool

145723908
HLA1625: RNCC: 3 | RNVC: 2

2 Jul 2012

5120-14-514-2266
Extracteur Porte In

145142266
26145908201: RNCC: 3 | RNVC: 2
028848-01: RNCC: 5 | RNVC: 2

30 Apr 1999

5120-14-280-8813
Cle Triangulaire

142808813
PA356-2M232P15: RNCC: 3 | RNVC: 2
PA356-2M232P15: RNCC: 3 | RNVC: 9

1 Jan 1971

5120-14-329-6330
Obus De Centrage

143296330
M31-053: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-383-0895
Jeu Extracteur Tuye

143830895
9970-121-206: RNCC: 3 | RNVC: 2

17 Mar 1983

5120-14-231-7220
Broche De Centrage

142317220
9970-125-019: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-206-9541
Matrice Pour Oeille

142069541
MATRICEP0UR0EILLET: RNCC: 3 | RNVC: 2

1 Jan 1964

5120-14-521-5321
Socket Wrench Socket

145215321
K.44HA: RNCC: 3 | RNVC: 2
K44HA: RNCC: 5 | RNVC: 2

9 Aug 2000

5120-14-216-4184
Socket Wrench Crowfoot Attachment

142164184
300243: RNCC: 3 | RNVC: 2
300243: RNCC: 5 | RNVC: 2
150A: RNCC: 5 | RNVC: 9
100-50A: RNCC: 5 | RNVC: 9
150: RNCC: 5 | RNVC: 9
100-150A: RNCC: 5 | RNVC: 9
300243-50: RNCC: 5 | RNVC: 9
W0F150A: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-514-8402
Cross Tip Screwdriver

145148402
ENFD6569-1X80: RNCC: 3 | RNVC: 2

21 Jun 1999

5120-14-284-1941

5120-14-229-5403
Doigt En Bronze Mar

142295403
4320036: RNCC: 3 | RNVC: 2
4320036: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-321-5678
Contre Clavette Sup

143215678
065-30-9005REP2: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-248-7500

5120-14-272-3748

5120-14-327-5400

5120-14-406-5673
Montage Outil

144065673
853-200-764-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-228-5206

5120-14-299-6415
Douille Sertissage

142996415
FF10X1C: RNCC: 3 | RNVC: 2
0T1625: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-440-5434
Levier

144405434
50720: RNCC: 3 | RNVC: 2
85-694-1105: RNCC: 6 | RNVC: 9

17 Jul 1990

5120-14-407-6318
Tire-Chasse Aiguill

144076318
A40-851-01: RNCC: 3 | RNVC: 2

27 Feb 1986

5120-14-398-1464
Compressi Outillage

143981464
MGC302-21: RNCC: 3 | RNVC: 2
MGC302-21: RNCC: 5 | RNVC: 2

31 Jan 1985

5120-14-493-0155
Tournevis

144930155
NO PRIMARY REF14-493-0155: RNCC: 3 | RNVC: 2
REG182B: RNCC: 5 | RNVC: 9
F300 0T 009 4692: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-266-8951
Cle Hexagonale

142668951
NO PRIMARY REF14-266-8951: RNCC: 3 | RNVC: 2
104535: RNCC: 5 | RNVC: 9

1 Jan 1970

5120-14-229-2672
Tire Roue

142292672
VTR250-1025: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-540-1544
Leveling-Support Jack

145401544
F00180058: RNCC: 3 | RNVC: 2
F00180058: RNCC: 5 | RNVC: 2

11 Mar 2004

5120-14-550-4130
Spring Inserter And Remover

145504130
10683715000: RNCC: 3 | RNVC: 2

19 Jun 2006

5120-14-356-1897
Open End Wrench

143561897
187543: RNCC: 3 | RNVC: 2

25 Apr 1979

5120-14-420-9869
Outil Reglage Noyau

144209869
16449485: RNCC: 3 | RNVC: 2
16449485: RNCC: 3 | RNVC: 9

6 Jan 1988

5120-14-280-8757
Verin Hydraulique

142808757
U.33A: RNCC: 3 | RNVC: 2
0068130: RNCC: 5 | RNVC: 2
3148510681306: RNCC: 5 | RNVC: 2
5000260816: RNCC: 5 | RNVC: 2
U.33: RNCC: 5 | RNVC: 9
U33: RNCC: 5 | RNVC: 9
0068120: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-408-9827
Embout Aimante

144089827
343-2: RNCC: 3 | RNVC: 2
3272670299542: RNCC: 5 | RNVC: 2

9 Apr 1986

5120-14-212-9178
Cle Double Pour Rac

142129178
9970-115-051: RNCC: 3 | RNVC: 2
9970-115-051-01: RNCC: 3 | RNVC: 2

1 Jan 1964

5120-14-272-3291
Open End Wrench

142723291
E74302C26-29WWF: RNCC: 2 | RNVC: 1

1 Jan 1971

5120-14-327-7011
Mechanical Puller Attachment

143277011
NO PRIMARY REF14-327-7011: RNCC: 3 | RNVC: 2
632068: RNCC: 5 | RNVC: 9

2 Jul 1975

5120-14-210-6909
Quick Adjusting Screw Clamp

142106909
NO PRIMARY REF14-210-6909: RNCC: 3 | RNVC: 2
703-1200MM: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-490-8818
Alene

144908818
4066 214 320 010: RNCC: 3 | RNVC: 2
F300 0T 000 5090: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-311-2037
Bague Emmanchement

143112037
33310: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-407-3299
Joints Emmanche

144073299
853-201-200-0: RNCC: 3 | RNVC: 2

12 Feb 1986

5120-14-428-5538
Arret Butee

144285538
MKG3712216: RNCC: 3 | RNVC: 2

8 Dec 1988

5120-14-426-8367
Spanner Wrench

144268367
0408-52021: RNCC: 3 | RNVC: 2
O-408-52-021: RNCC: 3 | RNVC: 2
0-408-52-021: RNCC: 5 | RNVC: 2

23 Sep 1988

5120-14-431-4880
Socket Head Screw Key

144314880
0372-42-10018: RNCC: 3 | RNVC: 2

19 Apr 1989

5120-14-385-3346
Spanner Wrench

143853346
365A93-3201-00: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-206-3667
Blacksmith's Flatter

142063667
NO PRIMARY REF14-206-3667: RNCC: 3 | RNVC: 2
13-38-80M: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-466-2553
Outil Fourchette

144662553
0XB101-005-300-75: RNCC: 3 | RNVC: 2

3 Nov 1993

5120-14-264-7905

5120-14-417-4615
Emmanchement Outil

144174615
1724771: RNCC: 3 | RNVC: 9

8 Jul 1987

5120-14-433-5468
Cross Tip Screwdriver

144335468
AP.0X75: RNCC: 3 | RNVC: 2
3148510088006: RNCC: 5 | RNVC: 2
0115334E00: RNCC: 5 | RNVC: 2
91752232: RNCC: 5 | RNVC: 2
99050272: RNCC: 5 | RNVC: 2
0008800: RNCC: 5 | RNVC: 9
AP.0: RNCC: 5 | RNVC: 9
AP0: RNCC: 5 | RNVC: 9

2 Aug 1989

5120-14-444-9504
Socket Head Screw Key

144449504
88.2: RNCC: 3 | RNVC: 2
88-2: RNCC: 5 | RNVC: 2
O613 250 020: RNCC: 5 | RNVC: 2
0126530: RNCC: 5 | RNVC: 9

29 Jan 1991

5120-14-490-6924
File

144906924
241 F 00880 000: RNCC: 3 | RNVC: 2
F300 0T 000 1054: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-472-3516
Socket Head Screw Key

144723516
82H.2: RNCC: 3 | RNVC: 2
3148511230114: RNCC: 5 | RNVC: 2
0110666N00: RNCC: 5 | RNVC: 2
91777998: RNCC: 5 | RNVC: 2
235-2864: RNCC: 5 | RNVC: 2
0715 31 36: RNCC: 5 | RNVC: 2
FACOM82H.2: RNCC: 5 | RNVC: 9
0123011: RNCC: 5 | RNVC: 9

19 Oct 1994

5120-14-490-0605
Pliers

144900605
431.C: RNCC: 3 | RNVC: 2
0175982: RNCC: 5 | RNVC: 2
3148511759820: RNCC: 5 | RNVC: 2
1091413T00: RNCC: 5 | RNVC: 2

10 Sep 1997

5120-14-532-3853
Face Spanner Wrench Socket

145323853
MHJ613-23: RNCC: 3 | RNVC: 2

30 Oct 2002

5120-14-406-9987
Extrac Tirant Court

144069987
780BELOG1-3D: RNCC: 3 | RNVC: 2

24 Jan 1986

5120-14-545-5019
Pedal Adjustment Tool Compressor

145455019
BP-95200: RNCC: 3 | RNVC: 2

15 Apr 2005

5120-14-271-8957
Tas Montage De Levi

142718957
3160-95-12-490: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-521-6326
Hole Sheet Metal Holder

145216326
30-32: RNCC: 3 | RNVC: 2
30-32: RNCC: 5 | RNVC: 9

30 Aug 2000

5120-14-214-1844
Adaptateur Cle Dyna

142141844
PR46038: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-570-2040
Bearing And Bushing Inserter

145702040
UFA31771: RNCC: 3 | RNVC: 2

28 Nov 2011

5120-14-263-8213

5120-14-371-1925

5120-14-550-5495
Pliers

145505495
64341: RNCC: 3 | RNVC: 2

23 Jun 2006

5120-14-376-2320

5120-14-208-6297

5120-14-232-9176
Outil Pour Emmanche

142329176
58978: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-483-2207
Echelle Avec Reserv

144832207
330A95-0162-00: RNCC: 3 | RNVC: 2

28 Aug 1996

5120-14-259-9322

5120-14-349-3541

5120-14-575-5956
Socket Wrench Socket Set

145755956
MOD.SL1: RNCC: 3 | RNVC: 2
3148519044645: RNCC: 5 | RNVC: 2

17 Apr 2013

5120-14-274-7933

5120-14-276-3093
Socket Wrench Socket

142763093
R9-16: RNCC: 3 | RNVC: 2
R-9/16: RNCC: 3 | RNVC: 2
R9-16: RNCC: 3 | RNVC: 2
3148510510002: RNCC: 5 | RNVC: 2
3272670226876: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-413-5823
Socket Head Screw Key

144135823
803-3: RNCC: 3 | RNVC: 2
80303: RNCC: 5 | RNVC: 2
803-3: RNCC: 5 | RNVC: 2

17 Dec 1986

5120-14-548-4219
Bearing Staking Installation Tool

145484219
TDCDAMCT1233528-501: RNCC: 3 | RNVC: 2
TDCDAMCT1233528-501: RNCC: 5 | RNVC: 2

13 Jan 2006

5120-14-253-6234
Spanner Wrench

142536234
0226-78: RNCC: 3 | RNVC: 2
RA226: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-357-9957
Equipee Chape

143579957
MKM0435400: RNCC: 3 | RNVC: 2
MKM0435400: RNCC: 5 | RNVC: 2

20 Jul 1979

5120-14-200-9843
Socket Wrench Socket

142009843
R.3/8: RNCC: 3 | RNVC: 2
R3-8: RNCC: 5 | RNVC: 2

1 Jan 1962

5120-14-532-9632
Socket Head Screw Key

145329632
84TZS.4: RNCC: 3 | RNVC: 2
3148511257227: RNCC: 5 | RNVC: 2
SYQ2066: RNCC: 5 | RNVC: 2

14 Jan 2003

5120-14-578-1885
Mechanical Puller S

145781885
8818836203: RNCC: 3 | RNVC: 2

7 Nov 2013

5120-14-539-4403
Screwdriver Bit

145394403
ENH.301/2: RNCC: 3 | RNVC: 2
3148510239057: RNCC: 5 | RNVC: 2

14 Jan 2004

5120-14-349-3776
Vis Dextracteur

143493776
C47381-3: RNCC: 3 | RNVC: 2

22 May 1978

5120-14-290-8621
Douille Dalignement

142908621
NO PRIMARY REF14-290-8621: RNCC: 3 | RNVC: 2
157456: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-245-8334
Cle Extracteur Lamp

142458334
PA355-143A1P12: RNCC: 3 | RNVC: 9
PA355-143A1P12: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-417-1848
Commande Manuelle

144171848
426-01953-000: RNCC: 3 | RNVC: 2

1 Jul 1987

5120-14-521-8896
Hand Terminal Crimping Tool

145218896
C234037A0000: RNCC: 3 | RNVC: 2
C234037A: RNCC: 5 | RNVC: 2
C234037A: RNCC: 5 | RNVC: 2

20 Sep 2000

5120-14-527-8642
Torque Wrench Adapter

145278642
E2C001230000107: RNCC: 3 | RNVC: 2

28 Nov 2001

5120-14-534-0874
Detent Handling Tool

145340874
713170: RNCC: 3 | RNVC: 2

12 Mar 2003

5120-14-529-7484
Handling Tool Arm

145297484
COU002552050001: RNCC: 3 | RNVC: 2

9 Apr 2002

5120-14-458-2632
Screwdriver Bit

144582632
008235050P: RNCC: 3 | RNVC: 2

15 Oct 1992

5120-14-490-8654
Porte O

144908654
4051 160 004 149: RNCC: 3 | RNVC: 2
F300 0T 000 4891: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-490-6833
Bit

144906833
240 B 00572 610: RNCC: 3 | RNVC: 2
F300 0T 000 0935: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-371-1563
Slip Joint Pliers

143711563
186-18CP: RNCC: 3 | RNVC: 2
130077: RNCC: 5 | RNVC: 2

5 Jun 1981

5120-14-333-3864
Inf Machoir Tendeur

143333864
0070-113: RNCC: 3 | RNVC: 2
113: RNCC: 3 | RNVC: 2
0070-113: RNCC: 5 | RNVC: 2
1113: RNCC: 5 | RNVC: 2

2 Jul 1975

5120-14-394-7924
Jet

143947924
6115-0623: RNCC: 3 | RNVC: 2

27 Sep 1984

5120-14-497-7129
Combination Box And Open End Wrench

144977129
11-C-19: RNCC: 3 | RNVC: 2

15 Oct 1997

5120-14-260-4581
Hand Terminal Crimping Tool

142604581
45740-2: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-566-3668
Quick Adjusting Screw Clamp

145663668
6546POC: RNCC: 3 | RNVC: 2

9 Nov 2010

5120-14-484-7250
Socket Head Screw Key Set

144847250
82H.JU10: RNCC: 3 | RNVC: 2
205-5210: RNCC: 5 | RNVC: 2
FACOM 82HJU10: RNCC: 5 | RNVC: 2
3148515327414: RNCC: 5 | RNVC: 2
FACOM82H.JU10: RNCC: 5 | RNVC: 9
0532741: RNCC: 5 | RNVC: 9
958 238 000 001: RNCC: 6 | RNVC: 9

5 Dec 1996

5120-14-537-1285
Open End Wrench

145371285
SP.12584: RNCC: 3 | RNVC: 2

1 Oct 2003

5120-14-327-0871
Electronic Equipment Tuning Wand

143270871
435907: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-559-2247
Socket Head Screw Key

145592247
7421045549: RNCC: 3 | RNVC: 2

15 Dec 2008

5120-14-548-4730
Socket Wrench Socket

145484730
S.26HLA: RNCC: 3 | RNVC: 2
00.49.44.94: RNCC: 5 | RNVC: 2

19 Jan 2006

5120-14-334-6865
Electrical Contact Inserter

143346865
90202-2: RNCC: 3 | RNVC: 2
3599505: RNCC: 5 | RNVC: 2

1 Jun 1976

5120-14-264-1566
Open End Wrench

142641566
10A1 1-2: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-395-4404
Spanner Wrench

143954404
2-35717: RNCC: 3 | RNVC: 2

25 Oct 1984

5120-14-245-8340
Cle Flexible

142458340
PA355-143A1P4: RNCC: 3 | RNVC: 9
PA355-143A1P4: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-534-0868
Bearing And Bushing Inserter

145340868
713027: RNCC: 3 | RNVC: 2

12 Mar 2003

5120-14-454-6731
Pin Inserter And Remover

144546731
503733G53T2M2: RNCC: 3 | RNVC: 2
503733G: RNCC: 5 | RNVC: 2

9 Apr 1992

5120-14-420-1851
Faux Clapet

144201851
34779: RNCC: 3 | RNVC: 2

24 Nov 1987

5120-14-424-3460
Screwdriver Bit

144243460
0025063: RNCC: 3 | RNVC: 2
ET.208: RNCC: 5 | RNVC: 2
ET208: RNCC: 5 | RNVC: 2

19 May 1988

5120-14-566-6898
Socket Wrench Screwdriver Attachment

145666898
STM.8: RNCC: 3 | RNVC: 2

7 Dec 2010

5120-14-255-8386

5120-14-517-4434
Open End Wrench

145174434
GS120-21X23: RNCC: 3 | RNVC: 2
1..70.1016: RNCC: 5 | RNVC: 2

15 Dec 1999

5120-14-278-7833
Inserted Hammer Face

142787833
EC.25: RNCC: 3 | RNVC: 2
EC25: RNCC: 5 | RNVC: 2
3148510224008: RNCC: 5 | RNVC: 2
0022400: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-472-3659
Mechanical Puller Attachment

144723659
239814S: RNCC: 3 | RNVC: 2

19 Oct 1994

5120-14-358-5711
Spanner Wrench

143585711
81372: RNCC: 3 | RNVC: 2
530142: RNCC: 5 | RNVC: 2

7 Sep 1979

5120-14-542-9613
Retaining Ring Pliers

145429613
800000: RNCC: 3 | RNVC: 2

14 Aug 2004

5120-14-373-7700
Matrice Sertissage

143737700
69493-1: RNCC: 3 | RNVC: 2

13 Nov 1981

5120-14-446-6369
Outil A Freiner

144466369
8813968000: RNCC: 3 | RNVC: 2

9 Apr 1991

5120-14-410-5561
Face Spanner Wrench Socket

144105561
J46295: RNCC: 3 | RNVC: 2

7 Jul 1986

5120-14-531-6471
Socket Wrench Socket

145316471
S.14F: RNCC: 3 | RNVC: 2
3148510538129: RNCC: 5 | RNVC: 2

6 Sep 2002

5120-14-214-3282
Socket Wrench Socket

142143282
J.9: RNCC: 3 | RNVC: 2
0715 12 20: RNCC: 5 | RNVC: 2
3148510271309: RNCC: 5 | RNVC: 2
J9: RNCC: 5 | RNVC: 2
0027130: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-325-4351
Stuffing Box And Pump Packing Extractor

143254351
49060021: RNCC: 3 | RNVC: 2
EXTRACTEUR5MM: RNCC: 5 | RNVC: 9

2 Jul 1975

5120-14-468-9951
Detent Handling Tool

144689951
444-01271-000: RNCC: 3 | RNVC: 2
444-01271-000: RNCC: 5 | RNVC: 2
85-694-8839: RNCC: 6 | RNVC: 9

30 Mar 1994

5120-14-393-0268
Open End Wrench

143930268
22 11-32X7-16: RNCC: 3 | RNVC: 2
22-11-32X7-16: RNCC: 3 | RNVC: 2
3148510949604: RNCC: 5 | RNVC: 2

12 Apr 1984

5120-14-487-6642
Open End Wrench

144876642
8969-71300: RNCC: 3 | RNVC: 2

18 Apr 1997

5120-14-395-3433
Open End Wrench

143953433
56-903-04-04: RNCC: 3 | RNVC: 2

2 Oct 1984

5120-14-237-4712
Detent Handling Tool

142374712
3130-95-68-012: RNCC: 3 | RNVC: 2
3130S95-68-012: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-496-2758
Handling Tool Arm

144962758
232G90YY3134023: RNCC: 3 | RNVC: 2
F300 0T 021 3367: RNCC: 6 | RNVC: 9

15 Oct 1997

5120-14-532-2418
Flat Tip And Cross Tip Screwdriver Set

145322418
247FEJ7: RNCC: 3 | RNVC: 2

23 Oct 2002

5120-14-532-1748
Wrench Extension Handle

145321748
671720: RNCC: 3 | RNVC: 2

16 Oct 2002

5120-14-527-5917
Bague Outillage

145275917
46AM146: RNCC: 3 | RNVC: 2

30 Oct 2001

5120-14-425-6667
App Deglac Chemises

144256667
DLP756180: RNCC: 3 | RNVC: 2

21 Jul 1988

5120-14-539-2645
Mechanical Puller Body

145392645
T632G3016124: RNCC: 3 | RNVC: 2

17 Dec 2003

5120-14-380-4692
Socket Wrench Extension

143804692
525723: RNCC: 3 | RNVC: 2
00525723: RNCC: 5 | RNVC: 2

29 Nov 1982

5120-14-212-0504

5120-14-217-2697

5120-14-430-6382
Fixation Equerre

144306382
MKG3722101: RNCC: 3 | RNVC: 2

22 Mar 1989

5120-14-329-6317
Cle De Degommage

143296317
M31-031: RNCC: 3 | RNVC: 2
26-163: RNCC: 3 | RNVC: 2
M31031: RNCC: 5 | RNVC: 2

2 Jul 1975

5120-14-491-3871
Open End Wrench

144913871
45-36: RNCC: 3 | RNVC: 2
F300 0T 002 6722: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-407-7478
Chc Vis Demonta Cle

144077478
553749: RNCC: 3 | RNVC: 2

27 Feb 1986

5120-14-428-5950
Extracteur Bague

144285950
4601EAV101-0001: RNCC: 3 | RNVC: 2

8 Dec 1988

5120-14-360-6834
Pistolet Masselotte

143606834
502-12: RNCC: 3 | RNVC: 2

19 Dec 1979

5120-14-249-9437
Socket Wrench Socket

142499437
J-23L: RNCC: 3 | RNVC: 2
J23L: RNCC: 5 | RNVC: 2
M4DZ7101949620: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-220-5173
Outil De Nettoyage

142205173
3160S96-65-000-1: RNCC: 3 | RNVC: 2
3160-96-65-000-1: RNCC: 5 | RNVC: 2

1 Jan 1965

5120-14-295-2884

5120-14-343-1835
Pose Filet Rapp Nez

143431835
01500614432: RNCC: 3 | RNVC: 2
01556144021: RNCC: 5 | RNVC: 2

16 Jun 1977

5120-14-393-5219
Outil Blocage Rotor

143935219
RC0001500: RNCC: 3 | RNVC: 2

7 Apr 1984

5120-14-241-6287
Cle Pour Collecteur

142416287
1050-95-502-00: RNCC: 3 | RNVC: 2
95-502-00: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-343-1825
Pose Filet Rapp Nez

143431825
01500610032: RNCC: 3 | RNVC: 2
01556100021: RNCC: 5 | RNVC: 2
01500610032: RNCC: 5 | RNVC: 2

16 Jun 1977

5120-14-458-6300
Cle Ecrou Triangle

144586300
M4HZ7101908104: RNCC: 3 | RNVC: 2

29 Oct 1992

5120-14-561-3105
Combination Box And Open End Wrench

145613105
440.38: RNCC: 3 | RNVC: 2
3148517682399: RNCC: 3 | RNVC: 2
768239: RNCC: 5 | RNVC: 2

3 Jul 2009

5120-14-423-2198
Bras Cle Dyn

144232198
0747101: RNCC: 3 | RNVC: 2
SP.1733 D-1: RNCC: 5 | RNVC: 2
SP1733D-1: RNCC: 5 | RNVC: 2

13 Apr 1988

5120-14-511-8381
Positionnemen Outil

145118381
56090271: RNCC: 3 | RNVC: 2

27 Jan 1999

5120-14-391-6453
Cross Tip Screwdriver

143916453
0004296: RNCC: 3 | RNVC: 2
AD.0: RNCC: 5 | RNVC: 2
AD0: RNCC: 5 | RNVC: 2
0236966X00: RNCC: 5 | RNVC: 2

21 Mar 1984

5120-14-286-7823

5120-14-444-9121
O T Maint Stimu Pav

144449121
0801131T00: RNCC: 3 | RNVC: 2

28 Jan 1991

5120-14-451-1127
Flat Tip Screwdriver

144511127
76188: RNCC: 3 | RNVC: 2
89280674: RNCC: 5 | RNVC: 2

30 Oct 1991

5120-14-551-0452
Automatic Center Punch

145510452
505: RNCC: 3 | RNVC: 2
00.08.79.06: RNCC: 5 | RNVC: 2

24 Aug 2006

5120-14-297-4257

5120-14-406-7842
Cle A Ergots

5120-14-446-7861
Cle A Douil Douille

5120-14-303-0570

5120-14-370-6400

5120-14-515-4478
Outil De Securite

145154478
Y120A004-200C: RNCC: 3 | RNVC: 2

13 Jul 1999

5120-14-216-2890
Cle De Reglage

142162890
1-1038-0262: RNCC: 3 | RNVC: 2
1-1038-02-62: RNCC: 5 | RNVC: 9
1-1038-02-62: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-496-8920
Open End Wrench

144968920
DIN3110-7X8FE-NI10BCRR: RNCC: 3 | RNVC: 2
F300 0T 022 2413: RNCC: 6 | RNVC: 9

15 Oct 1997

5120-14-234-3452
Cle A Fourche

142343452
M02016: RNCC: 3 | RNVC: 2
0000330519: RNCC: 5 | RNVC: 2
0000330519: RNCC: 5 | RNVC: 9
330519: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-253-9542
Pince A Segments

142539542
DLT070550: RNCC: 3 | RNVC: 2
DLT070550B: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-329-6350
De Centrage Obus

143296350
SMS247: RNCC: 3 | RNVC: 2
SMS247: RNCC: 5 | RNVC: 9

2 Jul 1975

5120-14-262-4784
Cle Moyeu Rotor Pri

142624784
3210-95-31-030: RNCC: 3 | RNVC: 2
08-294: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-417-8469
Open End Wrench

144178469
10-5X5-5: RNCC: 3 | RNVC: 2
10-5X5-5C: RNCC: 5 | RNVC: 2

29 Jul 1987

5120-14-388-1000
Pliers

143881000
851-200-053-0: RNCC: 3 | RNVC: 2
85-800-9647: RNCC: 6 | RNVC: 9

12 Oct 1983

5120-14-466-2103
Plug Electrical Connector Extractor

144662103
2-33579: RNCC: 3 | RNVC: 2

27 Oct 1993

5120-14-536-1929
Bearing And Bushing Inserter And Remover

145361929
E92.20902.0: RNCC: 3 | RNVC: 9
SYQ3092: RNCC: 5 | RNVC: 2

15 Jul 2003

5120-14-322-5922

5120-14-532-0286
Combination Box And Open End Wrench

145320286
39.JE9: RNCC: 3 | RNVC: 2

9 Oct 2002

5120-14-381-4510
Screwdriver Bit

143814510
S257: RNCC: 3 | RNVC: 2
3272670289833: RNCC: 5 | RNVC: 2

25 Jan 1983

5120-14-382-7624
Electrical Contact Remover

143827624
809819: RNCC: 3 | RNVC: 2

17 Feb 1983

5120-14-520-9922
Flat Tip Screwdriver Set

145209922
ACZ.JS5: RNCC: 3 | RNVC: 2
ACH.JS5: RNCC: 5 | RNVC: 2

28 Jun 2000

5120-14-558-9419
Six Point Tip Screwdriver

145589419
ANXP15X75: RNCC: 3 | RNVC: 2
775535: RNCC: 3 | RNVC: 2
3148517755352: RNCC: 5 | RNVC: 2

24 Nov 2008

5120-14-479-4149
Maintien Cle

144794149
46AM121: RNCC: 3 | RNVC: 2

10 Jan 1996

5120-14-530-5920
Slip Joint Pliers

145305920
178851: RNCC: 3 | RNVC: 2
3148511788516: RNCC: 5 | RNVC: 2
484A: RNCC: 5 | RNVC: 2

26 Jun 2002

5120-14-391-4259
Fixed Open End Wrench Set

143914259
31JE6T: RNCC: 3 | RNVC: 2
3148515278501: RNCC: 5 | RNVC: 2

1 Mar 1984

5120-14-394-3335
Spanner Wrench

143943335
20196326: RNCC: 3 | RNVC: 2
20196326: RNCC: 5 | RNVC: 9

28 Aug 1984

5120-14-378-3901
Electrical Contact Inserter And Remover

143783901
001100 330 00: RNCC: 3 | RNVC: 2
91526086: RNCC: 5 | RNVC: 2
001100-330-00: RNCC: 5 | RNVC: 2

11 Aug 1982

5120-14-385-3112
Spanner Wrench

143853112
360A93-3222-00: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-491-6258
Cle

144916258
3AMX11X13: RNCC: 3 | RNVC: 2
F300 0T 003 7028: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-236-2621

5120-14-573-5898
Mechanical Puller Body

145735898
T623G3006121: RNCC: 3 | RNVC: 2

23 Oct 2012

5120-14-557-9168
Socket Wrench Adapter

145579168
9402CMP133017: RNCC: 3 | RNVC: 2

30 Jul 2008

5120-14-576-9256
Socket Wrench Socket

145769256
261172698-01: RNCC: 3 | RNVC: 2

23 Jul 2013

5120-14-276-3077
Socket Wrench Socket

142763077
NO PRIMARY REF14-276-3077: RNCC: 3 | RNVC: 2
0051260: RNCC: 5 | RNVC: 2
R.6L: RNCC: 5 | RNVC: 2
R6L: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-315-3099

5120-14-319-6469

5120-14-287-8761

5120-14-538-9821
Spanner Wrench

145389821
NGM0053905335130: RNCC: 2 | RNVC: 2

9 Dec 2003

5120-14-271-6091
Open End Wrench

142716091
69-94: RNCC: 3 | RNVC: 2
E74301C94WWF: RNCC: 5 | RNVC: 1
3272670247772: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-313-7225
Socket Wrench Socket

143137225
C47020: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-463-1182
Socket Wrench Socket

144631182
206249D: RNCC: 3 | RNVC: 2
402565REP2: RNCC: 5 | RNVC: 2

26 May 1993

5120-14-236-4567

5120-14-572-1056
Hand Terminal Crimping Tool

145721056
62595325: RNCC: 3 | RNVC: 2

7 Jun 2012

5120-14-421-0839
Cle Pour Pistolet

144210839
65C: RNCC: 3 | RNVC: 9

6 Jan 1988

5120-14-355-2275

5120-14-442-2428
Guide

144422428
193-24862J: RNCC: 3 | RNVC: 2

3 Oct 1990

5120-14-219-2155
Adaptateur Special

142192155
PR46588: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-373-5873
Spanner Wrench

143735873
523018: RNCC: 3 | RNVC: 2
23540: RNCC: 5 | RNVC: 2
BFC23540: RNCC: 5 | RNVC: 2

13 Nov 1981

5120-14-304-3114

5120-14-238-3005

5120-14-391-8584
Outil De Positionne

143918584
70359730: RNCC: 3 | RNVC: 2
70359730: RNCC: 5 | RNVC: 9

21 Mar 1984

5120-14-370-6403

5120-14-409-7837
Cle De Bol

144097837
520408-81: RNCC: 3 | RNVC: 2

28 May 1986

5120-14-490-8948
Tricois

144908948
4067 370 001 193: RNCC: 3 | RNVC: 2
F300 0T 000 5225: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-562-8462
Open End Wrench

145628462
261351447-00: RNCC: 3 | RNVC: 2

26 Nov 2009

5120-14-401-1722
Electrical Card Extractor

144011722
22005031-1: RNCC: 3 | RNVC: 2

29 May 1985

5120-14-248-5160
Cle A Bequille

142485160
PR46083: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-303-6285
Socket Wrench Socket

143036285
RD-1: RNCC: 3 | RNVC: 2
3272670223592: RNCC: 5 | RNVC: 2
RD1: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-276-3115
Socket Wrench Socket

142763115
S10: RNCC: 3 | RNVC: 2
S-10: RNCC: 3 | RNVC: 2
65L10-12PANS: RNCC: 3 | RNVC: 2
S10: RNCC: 3 | RNVC: 9
369648: RNCC: 5 | RNVC: 2
3148510535203: RNCC: 5 | RNVC: 2
3272670260146: RNCC: 5 | RNVC: 2
S10: RNCC: 5 | RNVC: 2
75S10: RNCC: 5 | RNVC: 9
DEMS10: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-437-0261
Spanner Wrench

144370261
0UT156: RNCC: 3 | RNVC: 2
OUT156: RNCC: 5 | RNVC: 2
OUT156-01: RNCC: 5 | RNVC: 2

15 Jan 1990

5120-14-406-6627
Locking Device Removal Tool

144066627
853-201-895-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-484-6498
Socket Wrench Socket

144846498
NO PRIMARY REF14-484-6498: RNCC: 3 | RNVC: 2
RB.6: RNCC: 5 | RNVC: 2
RB6: RNCC: 5 | RNVC: 2
3148510532868: RNCC: 5 | RNVC: 2
0053286: RNCC: 5 | RNVC: 9

28 Nov 1996

5120-14-410-0625
Torque Wrench Adapter

144100625
853-100-217-0: RNCC: 3 | RNVC: 2

4 Jun 1986

5120-14-424-5674
Socket Wrench Socket

144245674
0028435: RNCC: 3 | RNVC: 2
J-15/16L: RNCC: 5 | RNVC: 2
J.15/16L: RNCC: 5 | RNVC: 2

31 May 1988

5120-14-457-7431
Talon

144577431
71545: RNCC: 3 | RNVC: 2

17 Sep 1992

5120-14-271-2888

5120-14-254-2457

5120-14-322-1336

5120-14-563-1958
Drive Pin Punch

145631958
522430: RNCC: 3 | RNVC: 2

13 Jan 2010

5120-14-232-6329

5120-14-574-3152
Mechanical Puller

145743152
7409998392: RNCC: 3 | RNVC: 2
9998392: RNCC: 5 | RNVC: 2

8 Jan 2013

5120-14-201-0593

5120-14-350-2525
Terminal Crimping Tool Contact Positioner

143502525
809858: RNCC: 3 | RNVC: 2

14 Jun 1978

5120-14-472-3681
Blacksmith's Flatter

144723681
864A.60: RNCC: 3 | RNVC: 2
3148512095309: RNCC: 5 | RNVC: 2
864A60: RNCC: 5 | RNVC: 2
0209530: RNCC: 5 | RNVC: 9

19 Oct 1994

5120-14-314-6431

5120-14-291-1068

5120-14-408-7381
Fourreau Fourrure

144087381
03ADSL: RNCC: 3 | RNVC: 2

2 Apr 1986

5120-14-498-9275
Cliquet

144989275
ST406M63P235: RNCC: 3 | RNVC: 2
413227: RNCC: 3 | RNVC: 2
F300 0T 012 6000: RNCC: 6 | RNVC: 9

29 Oct 1997

5120-14-032-2903
Cle A Ergot Adaptat

140322903
33154A: RNCC: 3 | RNVC: 2
92E0103: RNCC: 5 | RNVC: 2

10 Jun 1982

5120-14-570-1895
Bearing And Bushing Remover

145701895
UFA33175: RNCC: 3 | RNVC: 2

25 Nov 2011

5120-14-406-9417

5120-14-406-5735
Montage Outil

144065735
853-200-887-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-406-5884
Extraction Vis

144065884
853-201-898-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-372-1516
Socket Head Screw Key

143721516
NO PRIMARY REF14-372-1516: RNCC: 3 | RNVC: 2
3148511266427: RNCC: 5 | RNVC: 2
88 7-32: RNCC: 5 | RNVC: 2
88.7/32: RNCC: 5 | RNVC: 2
0126642: RNCC: 5 | RNVC: 9

1 Sep 1981

5120-14-433-6107
Bearing And Bushing Inserter And Remover

144336107
8815410000: RNCC: 3 | RNVC: 2
89415026: RNCC: 5 | RNVC: 2

2 Aug 1989

5120-14-317-0445
Spanner Wrench

143170445
RT5391: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-369-6976
Open End Wrench

143696976
BB83: RNCC: 3 | RNVC: 9

17 Apr 1981

5120-14-564-3206
Screwdriver Bit

145643206
SHP.6LA: RNCC: 3 | RNVC: 2
659307: RNCC: 5 | RNVC: 2
91882106: RNCC: 5 | RNVC: 9

22 Apr 2010

5120-14-324-1985

5120-14-225-4049

5120-14-314-5192
Spanner Wrench

143145192
0377-03-21001: RNCC: 3 | RNVC: 2

1 Jan 1974

Load More Results