What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.

A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Blacksmith's Punch?

A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Mechanical Finger?

A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.

A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Screwdriver And Wrench Assembly?

A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Stakeholder Bench Plate?

A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.

What is a Drill Drift?

A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.

A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Digging Bar?

A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

What is a Valve Spring Lifter?

A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.

What is a Fuse Puller?

A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.

Hand Tools, Nonedged, Nonpowered - France (FR)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by France (FR) - NCB is 14

Page 35 of 110

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by France

51	20	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - France (FR)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 16 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Pipe Vise? 19 Items: A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.
What is a Hand Vise? 25 Items: A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.
What is a Hand Hydraulic Jack? 133 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 153 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 903 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 17 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
Swage,Bottom,Blacksmith's 10 Items
What is a Hand Tube Flaring Tool? 23 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Blacksmith's Punch? 12 Items: A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.
What is a Drain Plug Wrench? 45 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 57 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 16 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 3829 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
Flatter,Blacksmith's 18 Items
Swage,Top,Blacksmith's 12 Items
What is a Pipe Wrench? 110 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 149 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 53 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
Screwdriver,Offset 54 Items
What is a Screwdriver Bit? 707 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Mechanical Finger? 25 Items: A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.
What is a Socket Wrench Socket? 1803 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 1412 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 1641 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 52 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 565 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
Jack,Push-Pull,Screw 30 Items
What is a Hand Tube Bender? 54 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 1106 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 55 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pinch Bar? 19 Items: A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.
What is a Pry Bar? 17 Items: A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.
What is a Wrecking Bar? 15 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 273 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 413 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 32 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 295 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
Face,Hammer,Inserted 25 Items
What is a Hole Sheet Metal Holder? 37 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Screwdriver And Wrench Assembly? 11 Items: A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.
What is a Hand Rivet Set? 121 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Stakeholder Bench Plate? 22 Items: A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.
What is a Drill Drift? 32 Items: A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.
What is a Tack Claw? 15 Items: A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.
Mattock 28 Items
What is a Socket Wrench Handle Bar? 108 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Stake,Sheet Metalworking 50 Items
Riveter,Blind,Hand 76 Items
What is a Hand Shovel? 43 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 98 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 30 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
What is a Digging Bar? 20 Items: A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.
Block,Dolly,Sheet Metalworking 56 Items
What is a Piston Ring Compressor? 34 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Valve Spring Lifter? 29 Items: A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.
What is a Fuse Puller? 20 Items: A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.
What is a Hand Lead Seal Press? 18 Items: A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.
What is a Hand Beading Tool? 91 Items: A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.
What is a Hand Hammer? 502 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
Head,Hand Hammer 81 Items
What is a Lamp Extractor? 76 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Tube Packing Ring Installing Tool? 29 Items: A Tube Packing Ring Installing Tool (INSTALLING TOOL,TUBE PACKING RING) is an item designed to insert packing rings on tubes within tube sheets on condensers and similar heat exchangers. In operation, the packing rings are assembled on the loading pin mandrel and are then transferred from the mandrel on to the tube by means of a tubular sleeve which slides on the mandrel.
What is a Carpenters' Pincers? 18 Items: A Carpenters' Pincers (PINCERS,CARPENTERS') is a plierlike hand tool having two opposing jaws which may have hammerlike backs. One handle has a nail or tack pulling claw, the other is shaped to form a screwdriver. The tool may contain a wire cutter. See also NIPPERS, END CUTTING and PINCERS, FARRIERS'.
What is a Trowel? 33 Items: A Trowel is a tool used for bricklaying, concrete work, plastering, linoleum laying, and masonry work. Excludes CORNER TOOL, CONCRETE.
What is a Hand Abrasive Wheel Dresser? 12 Items: A Hand Abrasive Wheel Dresser (DRESSER,ABRASIVE WHEEL,HAND) is a tool designed to remove glaze from, dress, shape, sharpen, and true solid abrasive wheels. Excludes NIB, DIAMOND, WHEEL DRESSING.
What is a Lamp Cap Extractor? 32 Items: A Lamp Cap Extractor (EXTRACTOR,LAMP CAP) is a tool specifically designed to facilitate the removal of lamp caps from switchboards, panels or indicator lamps.
What is a Rivet Bucking Bar? 51 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 86 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 277 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Woven Cable Grip? 23 Items: A Woven Cable Grip (GRIP,CABLE,WOVEN) is a braided wire device designed to clutch a bare or insulated conductor, cable or wire rope, for holding taut or drawing through conduit.
What is a Screw Thread Insert Extractor? 19 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is an Electron Tube Extractor? 18 Items: An Electron Tube Extractor (EXTRACTOR,ELECTRON TUBE) is a hand tool designed to facilitate the removal of electron tubes from electronic equipment and to avoid burning the fingers. It may be used for installing tubes.
What is a Cross Tip Screwdriver? 362 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 21 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 11 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 37 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Tool Handle Wedge? 10 Items: A Tool Handle Wedge (WEDGE,TOOL HANDLE) is excludes WEDGE, WOOD.
What is a Marlinespike? 16 Items: A Marlinespike is a metal hand tool made in the shape of a tapered pin. One end is pointed and the opposite end may be headed. The body may contain an eye for a lanyard sling, or be grooved lengthwise. Excludes CABLE PICK and FID.
What is an Aligning Punch? 272 Items: An Aligning Punch (PUNCH,ALIGNING) is a round, square, hexagonal or octagonal bodied hand tool, having a round tapered section 6-1/2 inches (165.1 mm) or more in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, DRIFT and DRIFTPIN.
What is a Drift Punch? 25 Items: A Drift Punch (PUNCH,DRIFT) is a round, square, hexagonal, or octagonal bodied hand tool, having a round tapered section 4 to 6 inches (101.6 mm to 152.4 mm) inclusive in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, ALIGNING; and DRIFTPIN.
What is a Putty Knife? 36 Items: A Putty Knife (KNIFE,PUTTY) is a hand tool with a nonedged blade fixed to a handle for laying on and smoothing putty and the like.
What is a Socket Wrench Adapter-Extension? 40 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 30 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 184 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Socket Wrench Ratchet Attachment? 47 Items: A Socket Wrench Ratchet Attachment (RATCHET ATTACHMENT,SOCKET WRENCH) is a connection for socket wrenches and handles. Consists of a ratcheting mechanism with an internal drive on one end and an external drive on the opposite end of the same size. The item is designed to permit continuous rotation of the socket in one direction without removing the socket or handle and without a complete rotation of the handle.
What is a Wrench Extension Handle? 81 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Socket Wrench Crowfoot Attachment? 155 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 33 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 43 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 48 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 2394 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 372 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 300 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 661 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 32 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand-Operated Grommet And Eyelet Press? 12 Items: A Hand-Operated Grommet And Eyelet Press (PRESS,GROMMET AND EYELET,HAND-OPERATED) is a device which punches or pierces holes and in addition fastens or sets eyelets and grommets in cloth, paper and similar material. May be used for fastening or setting rivets, lacing hooks and snaps in cloth, paper and similar material. It is hand operated by lever or screw action. See also PUNCH, EYELET, PLIER TYPE and PRESS, GROMMET AND EYELET, FOOT OPERATED.
What is a Claw Bar? 19 Items: A Claw Bar (BAR,CLAW) is before using, refer to Reference Drawing Group AG.
What is a Shock Type Wheel Stud Nut Wrench? 11 Items: A Shock Type Wheel Stud Nut Wrench (WRENCH,WHEEL STUD NUT,SHOCK TYPE) is a manually operated item designed to remove wheel stud nuts. In operation the inner nut is turned by a socket attached to a shaft on which is a loose swinging weighted handle. The weighted handle may be swung quickly to provide an impact force against the socket to loosen the seized or jammed nuts. The outer nut is held stationary by a separate hexagonal holding wrench.
What is a Drift Pin Set? 30 Items: A Drift Pin Set is a group of DRIFTPIN having different characteristics.
What is a Tire Iron? 25 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 115 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Blacksmith's Vise? 14 Items: A Blacksmith's Vise (VISE,BLACKSMITH'S) is a clamping device consisting of a mounting plate, one stationary and one manual screw actuated jaw and a supporting member extending downward from the stationary jaw to the floor. Designed to be mounted on a bench, table or the like. May include pipe holding jaws.
What is a Machinist's Vise? 64 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Clamp Base Bench Vise? 10 Items: A Clamp Base Bench Vise (VISE,BENCH,CLAMP BASE) is a clamping device consisting of a base, one stationary and one manual screw actuated jaw, and one or more guide bars or rods. Designed with an integral clamp for attaching to a bench, table, or the like. Does not include pipe holding jaws.
What is a Fixed Open End Wrench Set? 86 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Nail Set? 11 Items: A Nail Set is a round knurled, square, hexagonal or octagonal bodied hand tool having a round tapered section terminating in a cupped point. It is designed to set brad head nails below the surface by striking it a hammerlike blow. See also PUNCH, DRIVE PIN.
What is a Socket Wrench Set? 202 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is an Open End Box Wrench Set? 10 Items: An Open End Box Wrench Set (WRENCH SET,OPEN END BOX) is a group of WRENCH, OPEN END BOX having different characteristics.
What is a Combination Box And Open End Wrench Set? 72 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Box Wrench Set? 36 Items: A Box Wrench Set (WRENCH SET,BOX) is a group of box wrenches having different characteristics. It may include a HANDLE, EXTENSION WRENCH. See also WRENCH SET, COMBINATION, BOX AND OPEN END.
What is a Hot Line Stick? 26 Items: A Hot Line Stick is a hand tool consisting of a straight, round stick (pole) made of a suitable nonconductive material with a tool fixed to one end. The other end may be plain or have a butt mounting device fixed to it. Various types of attachments (hooks, rings, and bands) may be fixed to the body. It is designed for use in the repair and maintenance of live high voltage aerial lines. Excludes hot line sticks without heads.
Handle,Mattock-Pick 15 Items
What is a Wrench Kit? 73 Items: A Wrench Kit is an assortment of various types and sizes of wrenches such as SOCKET, SOCKET WRENCH; WRENCH, OPEN END, FIXED; WRENCH, BOX and the like. It may include adapter(s), ratchet(s) and the like. See also WRENCH SET (as modified.
What is a Brad Awl? 15 Items: A Brad Awl (AWL,BRAD) is a small, pointed tool used by shoemakers, saddlers, cabinetmakers, and the like for piercing small holes in wood, leather, and similar materials, and consists of a handle with a ferrule and a blade. The blade is round, terminating in a beveled, sharp straight edge and has a shank which passes through the center of the handle.
What is a Scratch Awl? 20 Items: A Scratch Awl (AWL,SCRATCH) is an item whose nominal length of blade is less than 4 inches (101.6 millimeters) and is provided with a nondetachable handle.
What is a Screw Extractor Set? 10 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 102 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
Jack,Scissors,Hand 26 Items
What is a Piston Ring Expander? 23 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
Mallet,Plastic 62 Items
Mallet,Rubber 10 Items
What is a Wood Mallet? 37 Items: A Wood Mallet (MALLET,WOOD) is excludes MALLET, CALKING; MALLET, HAWSING and MALLET, SERVING.
What is a Rack Bar Jack? 30 Items: A Rack Bar Jack (JACK,RACK BAR) is excludes JACK, BUMPER and JACK, REEL, HAND.
What is a Pneumatic Tire Valve Core Inserter And Remover? 14 Items: A Pneumatic Tire Valve Core Inserter And Remover (INSERTER AND REMOVER,PNEUMATIC TIRE VALVE CORE) is a bar of steel having a small cylindrical slotted end for removing or installing a valve core in a valve stem by a screwing motion. See also REPAIR TOOL, PNEUMATIC TIRE VALVE.
What is a Hand Tube Swaging Tool Kit? 20 Items: A Hand Tube Swaging Tool Kit (SWAGING TOOL KIT,TUBE,HAND) is a hand-operated noncutting tool consisting of one or more PUNCH, TUBE SWAGING, HAND and a tube flaring bar.
What is a Hand Tube Flaring Punch? 11 Items: A Hand Tube Flaring Punch (PUNCH,TUBE FLARING,HAND) is a noncutting tool having a shaped end or section designed to flare the ends of tubes. One type is designed to flare the ends of tubes against a tube sheet, and another to flare tube ends to mate with tube fittings. Includes punch components of FLARING TOOL, TUBE, HAND.
What is a Hose Strap Band Clamping Tool? 26 Items: A Hose Strap Band Clamping Tool (CLAMPING TOOL,STRAP BAND,HOSE) is an item designed to tension and lock metal straps around a rubber hose, and the like. It is also used to clamp and hold fittings therein.
What is a Mechanical Puller? 3073 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 470 Items
What is a Slip Joint Pliers? 84 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Brake Repair Pliers? 14 Items: A Brake Repair Pliers (PLIERS,BRAKE REPAIR) is a tool having jaws designed for use in brake repair operations, such as removing and replacing items such as keys, springs, and the like. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 226 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 12 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 81 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 56 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 15 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 11 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 29 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Cross Tip Screwdriver Set? 14 Items: A Cross Tip Screwdriver Set (SCREWDRIVER SET,CROSS TIP) is a group of SCREWDRIVER, CROSS TIP having different characteristics.
What is a Spanner Wrench Set? 18 Items: A Spanner Wrench Set (WRENCH SET,SPANNER) is a group of items under WRENCH, SPANNER having different characteristics.
What is a Drive Pin Punch Set? 31 Items: A Drive Pin Punch Set (PUNCH SET,DRIVE PIN) is a group of PUNCH, DRIVE PIN having different characteristics.
What is an Aligning Punch Set? 13 Items: An Aligning Punch Set (PUNCH SET,ALIGNING) is a group of PUNCH, ALIGNING having different characteristics. See also DRIFTPIN SET.
What is a Slugging Type Box Wrench Socket? 16 Items: A Slugging Type Box Wrench Socket (SOCKET,SLUGGING TYPE BOX WRENCH) is an item having a hexagonal external drive at one end, made to fit into the internal hexagonal or 12-point opening of a slugging type box wrench. The opposite end has a single-broached hexagonal opening of the same size as the external drive. The item is designed with extra thick walls to withstand the impact of sledge blows on the driving wrench.
What is a Mechanical Puller Step Plate? 44 Items: A Mechanical Puller Step Plate (STEP PLATE,MECHANICAL PULLER) is a circular disk, flanged to provide a shoulder, and designed to provide a base for the screw point of a PULLER, MECHANICAL when pulling externally mounted bearings, gears, and the like from hollow shafts or housings. It has a concentric, countersunk hole to accommodate the puller screw point.
What is a Solid Center Punch? 79 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Cable Type Ratchet Lever Puller? 20 Items: A Cable Type Ratchet Lever Puller (PULLER,RATCHET LEVER,CABLE TYPE) is an item consisting of a metal frame and ratchet lever reel to which is attached one end of a flexible cable (wire rope). The cable feeds through the fast eye in the metal frame, and may be reeved through a slip hook tackle hook. See also BINDER, LOAD; HOIST, WIRE ROPE and STRETCHER, WIRE.
What is an Electronic Equipment Tuning Wand? 18 Items: An Electronic Equipment Tuning Wand (TUNING WAND,ELECTRONIC EQUIPMENT) is a hand-held rod used in determining the adjustment of the windings of a radio frequency coil. It is made of insulating material with iron on one end and brass on the other end. By inserting the iron end in the coil, the inductance is increased and by inserting the brass end, the inductance is decreased.
What is a Combination Open End And Spanner Wrench? 14 Items: A Combination Open End And Spanner Wrench (WRENCH,OPEN END AND SPANNER,COMBINATION) is a tool having open end wrench characteristics at one end and spanner wrench features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s) at the other end.
What is a Detent Handling Tool? 187 Items: A Detent Handling Tool (HANDLING TOOL,DETENT) is a specially designed handling tool consisting of a rigid bar with a T-handle on one end. The other end is equipped with threads designed to mate the threads of a detent to facilitate inserting or extracting.
What is a Hand Material Handling Hook? 23 Items: A Hand Material Handling Hook (HOOK,MATERIAL HANDLING,HAND) is a hook whose curved end conforms to Style AP1, AP2, AP3 or AP4 of Reference Drawing Group AP. Excludes HOOK, MANHOLE COVER, HAND; HOOK, WIRE BREAKING, HAND; HOOK, ROCK CRUSHER FEEDING, HAND; HOOK, STRAINER REMOVING, HAND and HOOKS, BAG HANDLING, HAND.
What is a Magnetic Retrieving Tool? 11 Items: A Magnetic Retrieving Tool (RETRIEVING TOOL,MAGNETIC) is a hand-operated magnetic device used to locate and pick up metallic articles, such as bolts, nuts, pins, washers, and the like, in confined spaces. It may be rigid, flexible or adjustable. Excludes FINGER, MECHANICAL.
What is a Mechanical Puller Adapter? 78 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Combination Box And Open End Box Wrench? 13 Items: A Combination Box And Open End Box Wrench (WRENCH,BOX AND OPEN END BOX,COMBINATION) is a double end wrench, box and open end box, primarily designed for removing or replacing tube fittings. The opening in the open end box may be machined at an angle from the longitudinal center line of the wrench.
What is a Screw Thread Insert Inserter? 136 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Flat Tip Screwdriver Set? 48 Items: A Flat Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP) is a group of SCREWDRIVER, FLAT TIP having different characteristics.
What is a Terminal Crimping Tool Contact Positioner? 89 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 16 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is an Adjustable Wrench? 138 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 239 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 75 Items
Handle,Shovel 10 Items
What is a Socket Wrench Spanner Attachment? 88 Items: A Socket Wrench Spanner Attachment (SPANNER ATTACHMENT,SOCKET WRENCH) is an item having an adjustable or fixed span with pin, hook, or key type end that is used to fit and turn various size retaining rings, cover plates, plugs, couplings, and like parts. Usually designed to be driven by a male driver.
What is a Retaining Ring Installation Tool? 44 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Tacker? 16 Items: A Tacker is a hand-operated, hammerlike or gunlike item without a clincher, used to drive preformed connecting elements like pins, nails or staples through one object or piece of material into another. Excludes STAPLER (as modified).
What is a Bearing And Bushing Inserter? 290 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 207 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 939 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 14 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 93 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 161 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 94 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 141 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 53 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Six Point Tip Screwdriver? 155 Items: A Six Point Tip Screwdriver (SCREWDRIVER,SIX POINT TIP) is a manual screwdriver having a single nonremoveable blade having a tip with six rounded points.
What is a Seal Inserter And Remover? 147 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 478 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is a Preformed Packing Inserter And Remover? 34 Items: A Preformed Packing Inserter And Remover (INSERTER AND REMOVER,PREFORMED PACKING) is a hand tool designed to install and remove a PACKING, PREFORMED.
What is a Pin Remover? 34 Items: A Pin Remover (REMOVER,PIN) is a hand tool designed to facilitate the removal of a pin from a hole.
What is a Pin Inserter And Remover? 13 Items: A Pin Inserter And Remover (INSERTER AND REMOVER,PIN) is a rodlike tool designed to facilitate the insertion and removal of a pin from a hole.
What is an Electrical Contact Inserter And Remover? 37 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Piston Inserter? 40 Items: A Piston Inserter (INSERTER,PISTON) is a tool designed to permit installation of a piston or piston assembly without damaging the packings or piston.
What is a Spring Inserter And Remover? 85 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 13 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Stud Inserter? 22 Items: A Stud Inserter (INSERTER,STUD) is a device designed to drive in studs. It does not have any facilities for removing or extracting studs. See also INSERTER AND REMOVER, STUD.
What is a Stud Inserter And Remover? 17 Items: A Stud Inserter And Remover (INSERTER AND REMOVER,STUD) is a group of items designed to extract and to drive studs. It may include collets, guides, housings, holders and the like. See also REMOVER SET, STUD and INSERTER, STUD.
What is a Gear Inserter? 54 Items: A Gear Inserter (INSERTER,GEAR) is a hand tool designed to install various gears onto a gearshaft. It may be operated by a pushing or a striking force.
What is a Crimping Tool Die? 73 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is an Electrical Connector Inserter? 45 Items: An Electrical Connector Inserter (INSERTER,ELECTRICAL CONNECTOR) is a hand tool designed to hold an electrical connector, and to assist in the positioning and installation of the connector on a cover, panel or the like.
What is a Float? 12 Items: A Float is a tool used for concrete, plastering and grouting work.
What is a Mechanical Puller Set? 19 Items: A Mechanical Puller Set (PULLER SET,MECHANICAL) is two or more separate PULLER, MECHANICAL of different fixed sizes.
What is a Lifting Pneumatic Bag? 11 Items: A Lifting Pneumatic Bag (PNEUMATIC BAG,LIFTING) is a device made of flexible material designed to lift another item by being placed under the item and being inflated with air or some other gas. It will have a means of being connected to an air or gas source and may include a connector hose, a control valve and/or a pressure regulator.
What is a Cable Tie Installation Tool? 22 Items: A Cable Tie Installation Tool (INSTALLATION TOOL,CABLE TIE) is a lightweight, hand-held, hand-operated tool designed to fasten cable ties, straps and the like. Cable tie is inserted into the nose of the tool flush to the cable tie head. Trigger handle tightens cable tie and cuts off any excess. These installation tools are available in a variety of sizes depending on their intended use with miniature, intermediate, standard, heavy or extra heavy cross section ties.
What is a Bearing Staking Installation Tool? 159 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
Wrench Set,Ratchet 15 Items
What is a Sealant Dispenser? 26 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Retaining Ring Pliers Set? 10 Items: A Retaining Ring Pliers Set (PLIERS SET,RETAINING RING) is a group of PLIERS, RETAINING RING having different characteristics.
What is a Hand Armament Subsystem Carrier? 52 Items: A Hand Armament Subsystem Carrier (CARRIER,ARMAMENT SUBSYSTEM,HAND) is a metallic item with a clamp device and/or space for depositing articles. It is used for transporting weapon parts during maintanence and/or repair work, such as gun barrel, automatic loader, breechblock and the like.
What is a Ring Retaining Pliers Tip Set? 13 Items: A Ring Retaining Pliers Tip Set (TIP SET,PLIERS,RING RETAINING) is a collection of removable metallic tips in matched pairs used to provide various size capablities to PLIERS, RING RETAINING which permits the removal and installation of internal and external retaining rings.
What is a Plug Electrical Connector Extractor? 45 Items: A Plug Electrical Connector Extractor (EXTRACTOR,ELECTRICAL CONNECTOR,PLUG) is a hand tool designed to disassemble CONNECTOR, PLUG, ELECTRICAL from a CONNECTOR, RECEPTACLE, ELECTRICAL.
What is a Torque Wrench Adapter Set? 10 Items: A Torque Wrench Adapter Set (ADAPTER SET,TORQUE WRENCH) is tWO or more ADAPTER, TORQUE WRENCH of different sizes.
What is an Electronic Component Inserter And Remover? 79 Items: An Electronic Component Inserter And Remover (INSERTER AND REMOVER,ELECTRONIC COMPONENT) is an item which can insert or remove an electronic component package such as MICROCIRCUIT; RESISTOR, NETWORK (as modified); and the like from its mounting position or socket. Excludes INSERTER AND REMOVER, ELECTRICAL CONTACT; REMOVER, ELECTRICAL CONTACT; EXTRACTOR, ELECTRICAL CARD; EXTRACTOR, ELECTRONIC CRYSTAL UNIT; EXTRACTOR, ELECTRON TUBE.
What is an Impact Type Bit Set And Handle Screwdriver? 14 Items: An Impact Type Bit Set And Handle Screwdriver (SCREWDRIVER,BIT SET AND HANDLE,IMPACT TYPE) is an item consisting of a set of screwdriver bits and a impact driver to accommodate the bits of various types and characteristics. It is designed to transmit a strong rotating movement by the impact of a hammer blowed on the impact driver. It is used to loosen rusted or seized screws. Excludes SCREWDRIVER, BIT SET AND HANDLE.
What is a Hand Vise Jaw? 19 Items: A Hand Vise Jaw (JAW,VISE,HAND) is an item consisting of two opposing parts of a VISE, HAND. The item is moveable and able to open and close. It can hold, grasp or clamp work.
What is a Screwdriver Handle? 28 Items: A Screwdriver Handle (HANDLE,SCREWDRIVER) is an item used to accommodate various types of BIT, SCREWDRIVER. It is designed to rotate a bit that is used for installing or removing screws.
What is a Wire Twister Pliers? 25 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 284 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is a Mechanical Puller Body? 45 Items: A Mechanical Puller Body (BODY,PULLER,MECHANICAL) is an item designed to support and enclose the internal parts of a PULLER,MECHANICAL.
What is a Flat Tip And Cross Tip Screwdriver Set? 39 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is a Socket Wrench Screwdriver Attachment Set? 22 Items: A Socket Wrench Screwdriver Attachment Set (SCREWDRIVER ATTACHMENT SET,SOCKET WRENCH) is a set of screwdriver attachment, socket wrench of different sizes. Items consist of a female square drive on one end to attach to a handle, socket wrench and various screwdriver tip configurations on the opposite end. Excludes SCREWDRIVER ATTACHMENT,SOCKET WRENCH
What is an Oil Filter Wrench? 44 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 430 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Communications Equipment Spring Adjuster? 13 Items: A Communications Equipment Spring Adjuster (ADJUSTER,SPRING,COMMUNICATIONS EQUIPMENT) is a single or double end tool, equipped with slot(s) of various dimensions or with cylindrical rod(s), used for adjusting the springs or spring tensioned parts of electronic equipment.
What is a Rotating Members Aligning Tool? 32 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
What is a Final Drive Assembly Alignment Pin? 41 Items: A Final Drive Assembly Alignment Pin (ALIGNMENT PIN,FINAL DRIVE ASSEMBLY) is a special designed pin used in the assembling of the final drive.
Arm,Handling Tool 77 Items
What is a Splicing Sleeve Compressing Tool? 23 Items: A Splicing Sleeve Compressing Tool (COMPRESSING TOOL,SPLICING SLEEVE) is a hand tool having hinged leverage handles similar to a CUTTER, BOLT or pliers, designed to compress a splicing sleeve when joining the ends of two conductors, or when forming an eye splice in the end of a wire rope. Excludes CRIMPING TOOL, TERMINAL, HAND.
What is a Hand Screw Jack Extension? 14 Items: A Hand Screw Jack Extension (EXTENSION,HAND SCREW JACK) is a length of externally threaded rigid shafting which is the adjustable section of a JACK, SCREW, HAND.
What is a Mechanical Puller Gear Adapter? 21 Items: A Mechanical Puller Gear Adapter (GEAR ADAPTER,PULLER,MECHANICAL) is an adapter that adapts a PULLER,MECHANICAL, to pull a certain gear.
Handle,Hydraulic Jack 18 Items
What is a Female Electrical Contact Resizing Tool? 11 Items: A Female Electrical Contact Resizing Tool (RESIZING TOOL,FEMALE ELECTRICAL CONTACT) is a tool designed to shape to a specific size, female contacts such as those used on electrical connectors, tube sockets, crystal sockets, and pin jacks.
What is a Screwdriver And Socket Wrench Combination? 13 Items: A Screwdriver And Socket Wrench Combination is a hand-tool formed into an integral unit with a socket wrench at one end and a screwdriver bit at the other end. See also SCREWDRIVER AND WRENCH ASSEMBLY.
What is a Hand Hose Fitting Swaging Tool Kit? 11 Items: A Hand Hose Fitting Swaging Tool Kit (SWAGING TOOL KIT,HOSE FITTING,HAND) is a device, hydraulically actuated by hand or power operated pump, consisting of face plate, adapter plate, finger cages, fingers, ram, bushing, and expanding mandrels combined on a single base in various functional arrangements. It is used for swaging the outside diameter of hose assembly fittings, expanding the inside diameter of hose assemblies, and securing the fabrication of hose assemblies. Included are a hand or power operated pump, lubricant, cases, and trays.
What is a Catch Lever Tool? 12 Items: A Catch Lever Tool (LEVER TOOL,CATCH) is a specially designed hand tool which engages the opening and closing lever of a CATCH (as modified) for ease of operation. It is constructed of thin rigid material, usually flat, and one end has an engaging tongue.
What is a Manual Impact Wrench? 11 Items: A Manual Impact Wrench (WRENCH,IMPACT,MANUAL) is a manually operated handheld tool consisting of spring-loaded handle and a power-impact head which delivers a torsional impact from either continuous movement of the handle in one direction, or by a reciprocating action. It is used in tightening and loosening fasteners, such as bolts, nuts, and the like. The item may include sockets, extensions and offset fittings, nut runners, and the like.
What is a Drift? 63 Items: A Drift is an item consisting of a tubular body fitted with replaceable tips. It is designed to insert or remove mechanical components where space is restricted.
What is a Nutdriver? 46 Items: A Nutdriver is a non-powered hand tool with a screwdriver style handle, shaft and formed female hex or square socket at driving end.
What is a Locking Device Removal Tool? 12 Items: A Locking Device Removal Tool (REMOVAL TOOL,LOCKING DEVICE) is a hand tool designed to facilitate the removal of a WASHER, KEY and a LOCKING PLATE, NUT AND BOLT.
What is a Hydraulic Fitting Crimping Tool Head? 26 Items: A Hydraulic Fitting Crimping Tool Head (HEAD,CRIMPING TOOL,HYDRAULIC FITTING) is a component of a crimping tool used to compress fittings on fluid tubes. It consists of a U-shape item, in which, are mounted different sizes of DIE, CRIMPING TOOL for tubes of various diameters.
What is a Torque Screwdriver? 11 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.
What is a Special Purpose Combination Wrench? 13 Items: A Special Purpose Combination Wrench (WRENCH,COMBINATION,SPECIAL PURPOSE) is a tool having a combination of ends and facets. The ends may have open end, box or spanner characteristics. The sides may have features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s). Designed to fit specific items, not sized as standard or metric.
What is a Screwdriver Bit Holder? 56 Items: A Screwdriver Bit Holder (HOLDER,SCREWDRIVER BIT) is an attachment with a socket end for accepting male hexagon shank insert bits and a drive end for adapting to a portable power or hand tool.
What is a Telescoping Pole? 16 Items: A Telescoping Pole (POLE,TELESCOPING) is an item which is designed to be extended or compressed by the sliding of overlapping sections. This item may or may not be able to accommodate an extension.

Stock Items From Supply Class 5120 Page 35 of 110

5120-14-282-8136
Outil D'installatio

142828136
380518-2: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-544-3866
Hand Terminal Crimping Tool

145443866
0-0949008-1: RNCC: 3 | RNVC: 2
949008-1: RNCC: 5 | RNVC: 2
162-3171: RNCC: 5 | RNVC: 2
AA002985: RNCC: 6 | RNVC: 9

26 Jan 2005

5120-14-232-1674
Open End Wrench

142321674
13 3-4X7-8: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-536-5291
Combination Box And Open End Wrench

145365291
40R.3/4: RNCC: 3 | RNVC: 2
3148511012055: RNCC: 5 | RNVC: 2

28 Aug 2003

5120-14-300-4576
Hand Terminal Crimping Tool

143004576
15500-20-7: RNCC: 3 | RNVC: 2
91545852: RNCC: 5 | RNVC: 2
91545852: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-294-4768
Electronic Equipment Tuning Wand

142944768
1066012G2: RNCC: 3 | RNVC: 2
1066012-2: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-416-7611
Rondelle Dappui

144167611
537488: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-563-1077
Socket Wrench Set

145631077
NHX.14A: RNCC: 3 | RNVC: 2
3148517332980: RNCC: 5 | RNVC: 2

24 Dec 2009

5120-14-201-0115

5120-14-246-5836

5120-14-541-6359
Plug Electrical Connector Extractor

145416359
MP6816: RNCC: 3 | RNVC: 2

16 Jun 2004

5120-14-440-0831
Torque Wrench Adapter

144400831
11.24: RNCC: 3 | RNVC: 2
0092730: RNCC: 5 | RNVC: 9

11 Jul 1990

5120-14-312-0255
Spanner Wrench

143120255
16141912: RNCC: 3 | RNVC: 2
A16141912: RNCC: 3 | RNVC: 2
16141912: RNCC: 3 | RNVC: 9
A16141912: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-406-5661
Joint Tori Emmanche

144065661
853-200-729-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-218-1838
Socket Wrench Socket

142181838
17-9-149: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-319-5802
Socket Head Screw Key

143195802
213-23-265-048-2: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-302-7753
Flat Tip Screwdriver Set

143027753
NO PRIMARY REF14-302-7753: RNCC: 3 | RNVC: 2
0500610: RNCC: 5 | RNVC: 2
502040AS3: RNCC: 5 | RNVC: 2
AS.3: RNCC: 5 | RNVC: 2
AS3: RNCC: 5 | RNVC: 2
0184473C00: RNCC: 5 | RNVC: 2
91564495: RNCC: 5 | RNVC: 2
91634273: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-296-8116

5120-14-202-4592

5120-14-344-3392
Fond Distri Extract

143443392
D47031: RNCC: 3 | RNVC: 2

10 Aug 1977

5120-14-395-7250

5120-14-349-0009

5120-14-382-5511
Electrical Card Extractor

143825511
NO PRIMARY REF14-382-5511: RNCC: 3 | RNVC: 2
20030895: RNCC: 5 | RNVC: 9

17 Feb 1983

5120-14-420-7182
Cle Speciale

144207182
6511-58423: RNCC: 3 | RNVC: 2
58423: RNCC: 5 | RNVC: 2

16 Dec 1987

5120-14-263-2700

5120-14-232-3108

5120-14-249-8322

5120-14-359-7545
Guide A Ressort

143597545
C39229: RNCC: 3 | RNVC: 2
101902: RNCC: 5 | RNVC: 2

15 Oct 1979

5120-14-419-2594
Appareil A Sertir

144192594
530601: RNCC: 3 | RNVC: 2

16 Oct 1987

5120-14-313-7238
Face Spanner Wrench Socket

143137238
C47050: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-538-3661
Spanner Wrench

145383661
NGM0010036234004: RNCC: 2 | RNVC: 2

9 Dec 2003

5120-14-549-3597
Socket Wrench Socket

145493597
31505-L43: RNCC: 3 | RNVC: 2

27 Mar 2006

5120-14-334-8056

5120-14-483-5378
Out De Percage Renv

144835378
4801E09-2100-00: RNCC: 3 | RNVC: 2

19 Sep 1996

5120-14-220-0288
Open End Wrench

142200288
44 5-16X7-16: RNCC: 3 | RNVC: 2
33-5-16-7-16: RNCC: 5 | RNVC: 2

1 Jan 1965

5120-14-370-4530
Saddler's Sewing Awl

143704530
NO PRIMARY REF14-370-4530: RNCC: 3 | RNVC: 2
C35-12: RNCC: 5 | RNVC: 9

18 May 1981

5120-14-513-4371
Socket Head Screw Key

145134371
NO PRIMARY REF14-513-4371: RNCC: 3 | RNVC: 2
NNP 5120860704210: RNCC: 5 | RNVC: 9

17 Mar 1999

5120-14-391-6137
Electrical Card Extractor

143916137
NO PRIMARY REF14-391-6137: RNCC: 3 | RNVC: 2
16931964: RNCC: 5 | RNVC: 9

21 Mar 1984

5120-14-321-2578
Flat Tip Screwdriver

143212578
2313029: RNCC: 3 | RNVC: 2
2313029: RNCC: 5 | RNVC: 1
85-626-8632: RNCC: 6 | RNVC: 9

1 Jan 1975

5120-14-443-8450
Hole Sheet Metal Holder

144438450
50020505: RNCC: 3 | RNVC: 2
85-694-4313: RNCC: 6 | RNVC: 9

10 Dec 1990

5120-14-269-5228
Spanner Wrench

142695228
D1512-775: RNCC: 3 | RNVC: 2
D1512-775: RNCC: 5 | RNVC: 9

1 Jan 1970

5120-14-437-3578
Open End Wrench

144373578
J00650-01S140P019: RNCC: 3 | RNVC: 2

30 Jan 1990

5120-14-514-0128
Open End Wrench

145140128
ENFD29159-20X21: RNCC: 3 | RNVC: 2

22 Apr 1999

5120-14-418-5789
Open End Wrench

144185789
70-11X13: RNCC: 3 | RNVC: 2
3272670294820: RNCC: 5 | RNVC: 2

2 Sep 1987

5120-14-249-9465
Open End Wrench

142499465
13L38X42: RNCC: 3 | RNVC: 2
10NC38X42: RNCC: 3 | RNVC: 2
44S38X42: RNCC: 5 | RNVC: 2
10-38X42C: RNCC: 5 | RNVC: 2
205891: RNCC: 5 | RNVC: 2
5000499572: RNCC: 5 | RNVC: 2
5000499572: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-371-4277
Pince De Serrage

143714277
6254-57257: RNCC: 3 | RNVC: 2

5 Aug 1981

5120-14-438-9636
Spanner Wrench

144389636
330A98-2164-2081: RNCC: 3 | RNVC: 2

11 Apr 1990

5120-14-370-6302
Mechanical Puller Attachment

143706302
330A98-2085-27: RNCC: 3 | RNVC: 2

18 May 1981

5120-14-530-2313
Socket Wrench Socket

145302313
94905152: RNCC: 3 | RNVC: 2

22 May 2002

5120-14-410-3437
Bearing And Bushing Inserter And Remover

144103437
8813522000: RNCC: 3 | RNVC: 2

18 Jun 1986

5120-14-425-0360
Screwdriver Bit

144250360
804041: RNCC: 3 | RNVC: 2
804041: RNCC: 5 | RNVC: 9

16 Jun 1988

5120-14-419-9546
Mechanical Puller

5120-14-456-0976

5120-14-291-8201
Retaining Ring Pliers

142918201
NO PRIMARY REF14-291-8201: RNCC: 3 | RNVC: 2
0146020: RNCC: 5 | RNVC: 2
199-14: RNCC: 5 | RNVC: 2
199.14: RNCC: 5 | RNVC: 2
91453603: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-573-5039
Ratchet Wrench

145735039
467F.9: RNCC: 3 | RNVC: 2

17 Oct 2012

5120-14-490-6837
Drill

144906837
240 D 00691 000: RNCC: 3 | RNVC: 2
F300 0T 000 0940: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-240-0105
Cle De Manoeuvre Du

142400105
K044BB18BREP6: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-468-9824
Seal Inserter And Remover

144689824
40N108304-2: RNCC: 3 | RNVC: 2

30 Mar 1994

5120-14-441-1502
Socket Wrench Ratchet Attachment

144411502
J.151R: RNCC: 3 | RNVC: 2
3148510286358: RNCC: 5 | RNVC: 2
J151R: RNCC: 5 | RNVC: 2
0028635: RNCC: 5 | RNVC: 9

22 Aug 1990

5120-14-511-3875
Cross Tip Screwdriver

145113875
AZPH.2X125: RNCC: 3 | RNVC: 2
13458: RNCC: 5 | RNVC: 2
3148510134581: RNCC: 5 | RNVC: 2
0613 918 2: RNCC: 5 | RNVC: 2

16 Dec 1998

5120-14-200-9157
Open End Wrench

142009157
3-32X35: RNCC: 3 | RNVC: 2

1 Jan 1962

5120-14-351-3319
Co Outil Dinsertion

143513319
01446979: RNCC: 3 | RNVC: 2
91460704: RNCC: 5 | RNVC: 2

10 Aug 1978

5120-14-530-7789
Socket Wrench Screwdriver Attachment Set

145307789
AMEX.2: RNCC: 3 | RNVC: 2
3148515004995: RNCC: 5 | RNVC: 2

3 Jul 2002

5120-14-363-2751
Sangle Piston Moteu

143632751
24545909000: RNCC: 3 | RNVC: 2
245459090: RNCC: 5 | RNVC: 9

3 Apr 1980

5120-14-311-2064

5120-14-376-0358
Spanner Wrench

143760358
8026120100: RNCC: 3 | RNVC: 2

30 Mar 1982

5120-14-362-1764
Spanner Wrench

143621764
C46569: RNCC: 3 | RNVC: 2

20 Feb 1980

5120-14-263-0539
Rochet

142630539
216114AREP2069: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-284-1946

5120-14-285-5944

5120-14-412-9794
Demontage Outil

144129794
853-202-453-0: RNCC: 3 | RNVC: 2

5 Nov 1986

5120-14-464-2456
Vis Adaptation

144642456
854-500-360-0: RNCC: 3 | RNVC: 2

28 Jul 1993

5120-14-284-6466
Hand Terminal Crimping Tool

142846466
825508-5: RNCC: 3 | RNVC: 2
161-0181: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-248-1178
Porte-Vis Avec Mand

142481178
6517: RNCC: 3 | RNVC: 9

1 Jan 1968

5120-14-273-6790
Cle Brochee

142736790
8810007144: RNCC: 3 | RNVC: 2
8810153003: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-262-3547

5120-14-573-8690
Hand Hammer

145738690
200H.36: RNCC: 3 | RNVC: 2

16 Nov 2012

5120-14-370-4883
Butee Sertissage

143704883
65882: RNCC: 3 | RNVC: 2

18 May 1981

5120-14-559-4102
Seal Inserter

145594102
REF829: RNCC: 3 | RNVC: 2

8 Jan 2009

5120-14-412-1600
Spanner Wrench

144121600
188448: RNCC: 3 | RNVC: 2

8 Oct 1986

5120-14-406-9421

5120-14-570-3184
Hand Screw Jack Extension

145703184
FAT71 344 11 P MARGOT 5000: RNCC: 3 | RNVC: 2

7 Dec 2011

5120-14-324-1424
Cle A Virer Moteur

143241424
631MA0087F3REP10: RNCC: 3 | RNVC: 2
631MA087F3REP10: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-245-1800
Cle A Oeil Speciale

142451800
0M567: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-541-5959
Vbf Outillage

145415959
29130543-3: RNCC: 3 | RNVC: 2

10 Jun 2004

5120-14-506-0605
Stakeholder Bench Plate

145060605
CKS7: RNCC: 3 | RNVC: 2

2 Apr 1998

5120-14-040-7358
Fixed Open End Wrench Set

140407358
000146003S: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-538-8515
Spanner Wrench

145388515
NGM0021020400250: RNCC: 2 | RNVC: 2

9 Dec 2003

5120-14-433-8155
Spanner Wrench

144338155
330A93-2011-01: RNCC: 3 | RNVC: 2

9 Aug 1989

5120-14-438-0845
Spanner Wrench

144380845
NO PRIMARY REF14-438-0845: RNCC: 3 | RNVC: 2
209664: RNCC: 5 | RNVC: 9
209664: RNCC: 5 | RNVC: 9

7 Mar 1990

5120-14-320-3838

5120-14-241-6051
Broche De Presertis

142416051
0T878: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-256-0366

5120-14-228-5685

5120-14-331-4230

5120-14-480-1516
Mechanical Puller Adapter

144801516
888-375-300-1: RNCC: 3 | RNVC: 2

21 Feb 1996

5120-14-350-1522
Outil Verification

143501522
RT13824: RNCC: 3 | RNVC: 2
85-800-7014: RNCC: 6 | RNVC: 9

14 Jun 1978

5120-14-248-1072

5120-14-209-8303

5120-14-421-8221
Socket Wrench Socket

144218221
3215522: RNCC: 3 | RNVC: 2

27 Jan 1988

5120-14-516-7967
Spanner Wrench

145167967
5000261464: RNCC: 3 | RNVC: 2

18 Oct 1999

5120-14-459-1647
Bearing And Bushing Remover

144591647
45215151: RNCC: 3 | RNVC: 2
45215151: RNCC: 5 | RNVC: 9

19 Nov 1992

5120-14-280-1428

5120-14-215-1341
Obus Demmanchement

142151341
3130S95-12-012: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-326-2774
Mechanical Puller Attachment

143262774
330A98-3115-24: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-393-8786
Bague De Retrait

143938786
NO PRIMARY REF14-393-8786: RNCC: 3 | RNVC: 2
OU138270: RNCC: 5 | RNVC: 9

23 Jun 1984

5120-14-295-2652

5120-14-572-4929
Screwdriver Bit Extension

145724929
O105783: RNCC: 3 | RNVC: 2

10 Jul 2012

5120-14-246-5820

5120-14-459-6467
Cle Speciale

144596467
EMB-00475-001: RNCC: 3 | RNVC: 2

10 Dec 1992

5120-14-406-6544
Demontage Guide

144066544
853-200-803-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-443-6338
Cle Speciale

144436338
NO PRIMARY REF14-443-6338: RNCC: 3 | RNVC: 2
OU136417: RNCC: 5 | RNVC: 9

30 Nov 1990

5120-14-297-9657
Electrical Contact Inserter

142979657
00113220260: RNCC: 3 | RNVC: 2
1132-202-60: RNCC: 5 | RNVC: 2
91571283: RNCC: 5 | RNVC: 2
1132-20: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-263-6566
Flat Tip Screwdriver

142636566
PA364-114A1P2: RNCC: 3 | RNVC: 9
PA364-114A1P2: RNCC: 5 | RNVC: 9

1 Jan 1970

5120-14-242-0989

5120-14-223-9155

5120-14-569-2817
Socket Wrench Socket

145692817
S47689: RNCC: 3 | RNVC: 2
S47689: RNCC: 5 | RNVC: 2

31 Aug 2011

5120-14-566-7013
Screw Thread Insert Inserter

145667013
05101: RNCC: 3 | RNVC: 2
71510000003: RNCC: 5 | RNVC: 2

8 Dec 2010

5120-14-254-5978

5120-14-491-0241
Regle

144910241
4602 012 900 006: RNCC: 3 | RNVC: 2
F300 0T 001 1038: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-576-1258
Cross Tip Screwdriver

145761258
AD3X150VE: RNCC: 3 | RNVC: 2
3148517748156: RNCC: 5 | RNVC: 2
774815: RNCC: 5 | RNVC: 2

30 May 2013

5120-14-201-0654
Socket Wrench Extension

142010654
M.215: RNCC: 3 | RNVC: 2
M215: RNCC: 3 | RNVC: 2
M-215: RNCC: 3 | RNVC: 2
VLM: RNCC: 3 | RNVC: 2
T215: RNCC: 3 | RNVC: 9
3148510326306: RNCC: 5 | RNVC: 2
M215: RNCC: 5 | RNVC: 2
3272670294035: RNCC: 5 | RNVC: 2
DEMT215: RNCC: 5 | RNVC: 9
0032630: RNCC: 5 | RNVC: 9

1 Jan 1962

5120-14-222-6410
Flat Tip Screwdriver

142226410
NO PRIMARY REF14-222-6410: RNCC: 3 | RNVC: 2
1140-9: RNCC: 5 | RNVC: 9

1 Jan 1966

5120-14-369-6057
Gabarit De Montage

143696057
8101B78-00-224: RNCC: 3 | RNVC: 2
8101-3160-78-00-224: RNCC: 5 | RNVC: 2
85-800-7781: RNCC: 6 | RNVC: 9

17 Apr 1981

5120-14-569-0305
Mechanical Puller

145690305
F27341000-1: RNCC: 3 | RNVC: 2
F27341000: RNCC: 3 | RNVC: 9
F27341000: RNCC: 5 | RNVC: 9

1 Aug 2011

5120-14-232-9188
Outil Pour Emmanche

142329188
51704: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-287-6452
Demonte Glace Fixe

142876452
44933A: RNCC: 3 | RNVC: 2
44933: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-570-6382
Six Point Tip Screwdriver

145706382
TB-8X60: RNCC: 3 | RNVC: 2

13 Jan 2012

5120-14-376-2295

5120-14-216-5537

5120-14-218-9653

5120-14-574-5024
Socket Wrench Socket

145745024
NS.22A: RNCC: 3 | RNVC: 2
654792: RNCC: 5 | RNVC: 2
3148516547927: RNCC: 5 | RNVC: 2

24 Jan 2013

5120-14-284-1934

5120-14-339-0157

5120-14-416-7541
Appareil De Mesure

144167541
537360: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-549-9832
Spanner Wrench

145499832
ME17284: RNCC: 3 | RNVC: 2

22 May 2006

5120-14-460-4715

5120-14-393-8822
Crowfoot Socket Wrench Head Socket Adapter

143938822
NO PRIMARY REF14-393-8822: RNCC: 3 | RNVC: 2
OU139821: RNCC: 5 | RNVC: 9

7 Mar 1996

5120-14-232-6311

5120-14-410-8004

5120-14-452-2254
Clavette Cle Superi

144522254
6252-101/Q29-R29/REP29: RNCC: 3 | RNVC: 2

7 Jan 1992

5120-14-391-8643
Commande Outillage

143918643
MFJ371-21: RNCC: 3 | RNVC: 2

21 Mar 1984

5120-14-396-1785
Ecrou Blocage Cle

143961785
0439-200600: RNCC: 3 | RNVC: 2
O439-200600: RNCC: 5 | RNVC: 2

27 Nov 1984

5120-14-393-8864
Socket Wrench Extension

143938864
NO PRIMARY REF14-393-8864: RNCC: 3 | RNVC: 2
OU136844: RNCC: 5 | RNVC: 9

23 Jun 1984

5120-14-449-0095
Bearing And Bushing Inserter

144490095
NO PRIMARY REF14-449-0095: RNCC: 3 | RNVC: 2
89280825: RNCC: 5 | RNVC: 2
301A26768-51: RNCC: 5 | RNVC: 9

24 Jul 1991

5120-14-334-2126
Spanner Wrench

143342126
BR4X531: RNCC: 3 | RNVC: 2
4X531: RNCC: 5 | RNVC: 2
85-100-4939: RNCC: 6 | RNVC: 9

23 Apr 1976

5120-14-238-4849
Open End Wrench

142384849
12-2P0UCES1-4: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-547-7609
Hand Terminal Crimping Tool

145477609
948761-3: RNCC: 3 | RNVC: 2

10 Nov 2005

5120-14-276-3072
Socket Wrench Socket

142763072
M65: RNCC: 3 | RNVC: 2
T65: RNCC: 3 | RNVC: 9
3148510318301: RNCC: 5 | RNVC: 2
DEMT65: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-313-5439
Spanner Wrench

143135439
53MA301027: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-401-8845
Spanner Wrench

144018845
CMT30E9013PL2DN40REP9: RNCC: 3 | RNVC: 2
92E0085: RNCC: 5 | RNVC: 2

13 Jun 1985

5120-14-213-7052
Tournevis Special

142137052
1962-4581: RNCC: 3 | RNVC: 2

1 Jan 1964

5120-14-334-0455
Deboucheur Manuel

143340455
MARC01508: RNCC: 3 | RNVC: 2

23 Apr 1976

5120-14-352-7188
Pouss Bras Cambreur

143527188
C910197: RNCC: 3 | RNVC: 2

14 Nov 1978

5120-14-333-1834
Extracteur Module

143331834
3511 120 80741: RNCC: 3 | RNVC: 2
3511-120-80741: RNCC: 5 | RNVC: 2

2 Jul 1975

5120-14-561-0122
Jack Elevating Block

145610122
CG133-1-15: RNCC: 3 | RNVC: 2

8 Jun 2009

5120-14-536-5286
Combination Box And Open End Wrench

145365286
40R.7/16: RNCC: 3 | RNVC: 2
3148511012000: RNCC: 5 | RNVC: 2

28 Aug 2003

5120-14-264-9609
Spanner Wrench

142649609
0580-78: RNCC: 3 | RNVC: 2
RA580: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-457-8439
Open End Wrench

144578439
M4HZ7101946920: RNCC: 3 | RNVC: 2

24 Sep 1992

5120-14-552-7142
Socket Head Screw Key

145527142
83H.24: RNCC: 3 | RNVC: 2
83H.24: RNCC: 5 | RNVC: 2
3148511242315: RNCC: 5 | RNVC: 2

25 Jan 2007

5120-14-429-8788
Spanner Wrench

144298788
4673: RNCC: 3 | RNVC: 2

15 Feb 1989

5120-14-510-1053
Socket Wrench Adapter-Extension

145101053
GA11002: RNCC: 3 | RNVC: 2
5120AA8005982: RNCC: 6 | RNVC: 9

4 Nov 1998

5120-14-512-3044
Spanner Wrench

145123044
MUP5120: RNCC: 3 | RNVC: 2

10 Feb 1999

5120-14-378-8451
Controle Outillage

143788451
UJK232-52: RNCC: 3 | RNVC: 2
UJK232-52: RNCC: 5 | RNVC: 2

11 Aug 1982

5120-14-430-3261

5120-14-468-2351
Goujon Emmancheur

5120-14-443-9891

5120-14-557-2818

5120-14-391-6198
Electrical Card Extractor

143916198
16928929: RNCC: 3 | RNVC: 2
16928929: RNCC: 5 | RNVC: 9

21 Mar 1984

5120-14-546-4944

5120-14-422-2331
Socket Head Screw Key

144222331
0436-01-123000: RNCC: 3 | RNVC: 2

24 Feb 1988

5120-14-387-2772
Cle Frigoriste De 1

143872772
94-01-002-53: RNCC: 3 | RNVC: 2

15 Sep 1983

5120-14-567-9906
Socket Wrench Socket

145679906
JHL-11: RNCC: 3 | RNVC: 2

2 May 2011

5120-14-370-8136
Spanner Wrench

143708136
6254-57024: RNCC: 3 | RNVC: 2

5 Jun 1981

5120-14-430-1068
Spanner Wrench

144301068
6232-54661: RNCC: 3 | RNVC: 2

1 Mar 1989

5120-14-254-6144
Cle De Blocage

142546144
4069-090A205: RNCC: 3 | RNVC: 2

1 Jan 1969

5120-14-366-5528
Cle Special Bouchon

143665528
16299908: RNCC: 1 | RNVC: 2
65-3-3PS2485: RNCC: 3 | RNVC: 2
16299908: RNCC: 5 | RNVC: 2
16299908: RNCC: 5 | RNVC: 9

20 Nov 1980

5120-14-301-0956
Face Spanner Wrench Socket

143010956
330A93-3404-00: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-460-3795
Socket Head Screw Key

144603795
401437: RNCC: 3 | RNVC: 2
401437: RNCC: 5 | RNVC: 9
85-694-7360: RNCC: 6 | RNVC: 9

21 Jan 1993

5120-14-391-6111
Electrical Card Extractor

143916111
NO PRIMARY REF14-391-6111: RNCC: 3 | RNVC: 2
16931988: RNCC: 5 | RNVC: 9

21 Mar 1984

5120-14-532-6402
Cle

145326402
2P82150-00: RNCC: 3 | RNVC: 2

25 Nov 2002

5120-14-491-0174
Compas

144910174
4602 007 400 004: RNCC: 3 | RNVC: 2
F300 0T 001 0963: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-333-3328
Reglage Resolve Cle

143333328
826-1-19-00: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-493-0073
Tourne

144930073
4067 340 000 856: RNCC: 3 | RNVC: 2
F300 0T 009 4443: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-241-1440
Extracteur Daxe Dar

142411440
0601-78: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-541-6492
Outil

145416492
0099411: RNCC: 3 | RNVC: 2

17 Jun 2004

5120-14-506-7661
De Montage Outil

145067661
M13380: RNCC: 3 | RNVC: 2

14 May 1998

5120-14-214-2836
Cle Speciale Pour E

142142836
9970-115-226: RNCC: 3 | RNVC: 2
9970-115-226-01: RNCC: 5 | RNVC: 2

1 Jan 1965

5120-14-228-5784

5120-14-402-1188
Cle Serrage Bouchon

144021188
044U50-699133M: RNCC: 3 | RNVC: 2

26 Jun 1985

5120-14-442-6503
Torch And Regulator Wrench

144426503
191-118-00: RNCC: 3 | RNVC: 2
91517893: RNCC: 5 | RNVC: 2

24 Oct 1990

5120-14-220-7886
Open End Wrench

142207886
RACD37: RNCC: 3 | RNVC: 2
RACD37: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-461-4710
Spanner Wrench

144614710
5001007463: RNCC: 3 | RNVC: 2

10 Mar 1993

5120-14-517-4183
Outil D'installatio

145174183
93417: RNCC: 3 | RNVC: 2
93417: RNCC: 5 | RNVC: 2
MO098849: RNCC: 6 | RNVC: 9

9 Dec 1999

5120-14-446-0577
Spanner Wrench

144460577
SV1558: RNCC: 3 | RNVC: 2
5000261558: RNCC: 5 | RNVC: 2
SV1558: RNCC: 5 | RNVC: 9

5 Mar 1991

5120-14-490-0611
Flat Tip And Cross Tip Screwdriver Set

144900611
AS.15: RNCC: 3 | RNVC: 2
0500670: RNCC: 5 | RNVC: 2
3148515006708: RNCC: 5 | RNVC: 2

10 Sep 1997

5120-14-380-8365
Spanner Wrench

143808365
C46143: RNCC: 3 | RNVC: 2

14 Dec 1982

5120-14-534-4136
Open End Wrench

145344136
56635280: RNCC: 3 | RNVC: 2

24 Mar 2003

5120-14-486-5606
Socket Wrench Socket

144865606
RT13636: RNCC: 3 | RNVC: 2

24 Mar 1997

5120-14-443-7921
Face Spanner Wrench Socket

144437921
F46277: RNCC: 3 | RNVC: 2

5 Dec 1990

5120-14-402-3173
Face Spanner Wrench Socket

144023173
0754091A00: RNCC: 3 | RNVC: 2

3 Jul 1985

5120-14-396-4322
Spanner Wrench

143964322
A33647X: RNCC: 3 | RNVC: 2

27 Nov 1984

5120-14-313-7213
Face Spanner Wrench Socket

143137213
C46610: RNCC: 3 | RNVC: 2
C46610: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-421-8224
Socket Wrench Socket

144218224
3215526: RNCC: 3 | RNVC: 2

27 Jan 1988

5120-14-417-1126
Grommet Inserting Punch And Die

144171126
540632: RNCC: 3 | RNVC: 2

1 Jul 1987

5120-14-299-7276
Spanner Wrench

142997276
1-1038-02-68: RNCC: 3 | RNVC: 9
1-1038-02-68: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-292-0773
Appareil Montage

142920773
NO PRIMARY REF14-292-0773: RNCC: 3 | RNVC: 2
145J72: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-444-7602
Cle De Serrage

144447602
0478-200005: RNCC: 3 | RNVC: 2

21 Jan 1991

5120-14-280-3272
Rodoir

142803272
403690T: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-264-7876

5120-14-496-7292
Cle

144967292
A09010416: RNCC: 3 | RNVC: 2
A09010416: RNCC: 5 | RNVC: 9
F300 0T 021 9740: RNCC: 6 | RNVC: 9

15 Oct 1997

5120-14-518-4248
Cle De Depose

145184248
101165401110: RNCC: 3 | RNVC: 2

7 Feb 2000

5120-14-338-1635
Mechanical Puller Attachment

143381635
NO PRIMARY REF14-338-1635: RNCC: 3 | RNVC: 2
U.32R2C: RNCC: 5 | RNVC: 2
U32R2: RNCC: 5 | RNVC: 2
U32R2C: RNCC: 5 | RNVC: 2
0068022: RNCC: 5 | RNVC: 2
UR32R2C: RNCC: 5 | RNVC: 2
91627168: RNCC: 5 | RNVC: 2

6 Nov 1976

5120-14-306-3430
Spanner Wrench

143063430
330A93-2009-20: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-395-1872
Torque Wrench Adapter

143951872
0U50226: RNCC: 3 | RNVC: 2
7M343: RNCC: 5 | RNVC: 2
121-411-02W26H: RNCC: 5 | RNVC: 2
85-692-5413: RNCC: 6 | RNVC: 9

2 Oct 1984

5120-14-450-5258
Hand Armament Subsystem Carrier

144505258
325425-02: RNCC: 3 | RNVC: 2
325425-02: RNCC: 5 | RNVC: 9

9 Oct 1991

5120-14-514-6966
Socket Wrench Extension

145146966
438399: RNCC: 3 | RNVC: 2
438399-002: RNCC: 5 | RNVC: 9

9 Jun 1999

5120-14-561-6298
A Syringe Mixer Tip

145616298
MA 6321 S: RNCC: 3 | RNVC: 2
188126564: RNCC: 5 | RNVC: 2
3386001: RNCC: 5 | RNVC: 2

11 Aug 2009

5120-14-256-8883
Spanner Wrench

142568883
761-3M957P1: RNCC: 3 | RNVC: 2

1 Jan 1969

5120-14-501-4168
Cross Tip Screwdriver

145014168
AZP.2X100: RNCC: 3 | RNVC: 2
AZP-2X100: RNCC: 5 | RNVC: 2
0013447: RNCC: 5 | RNVC: 2
3148510134475: RNCC: 5 | RNVC: 2
AZP2X100: RNCC: 5 | RNVC: 2

29 Oct 1997

5120-14-303-6431
Torque Wrench Adapter

143036431
D0-17: RNCC: 3 | RNVC: 2
D017: RNCC: 3 | RNVC: 2
3272670236363: RNCC: 5 | RNVC: 2
816789: RNCC: 5 | RNVC: 2
D017: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-309-7458
Face Spanner Wrench Socket

143097458
341A98-2028-20: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-218-9422
Electronic Equipment Alignment Tool

142189422
NO PRIMARY REF14-218-9422: RNCC: 3 | RNVC: 2
2007700: RNCC: 5 | RNVC: 9
3007700: RNCC: 5 | RNVC: 9
1007700: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-511-8643
Screwdriver Bit

145118643
ET0R.104: RNCC: 3 | RNVC: 2
ET0R-104: RNCC: 5 | RNVC: 2
ET0R104: RNCC: 5 | RNVC: 2

27 Jan 1999

5120-14-262-5508

5120-14-284-7426

5120-14-424-3789
Outil Regl Frein Ro

144243789
365A94-3245-01: RNCC: 3 | RNVC: 2

19 May 1988

5120-14-338-4813
Bague De Retreint

143384813
S16-0606-2551: RNCC: 3 | RNVC: 2

6 Nov 1976

5120-14-440-5430
Cle

144405430
51988: RNCC: 3 | RNVC: 2
85-694-1115: RNCC: 6 | RNVC: 9

17 Jul 1990

5120-14-241-6073
Mandrin De Preserti

142416073
FF10X12N: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-491-0126
Cle

144910126
4602 007 200 044: RNCC: 3 | RNVC: 2
F300 0T 001 0912: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-234-3698
Bague Conique Monta

142343698
202461: RNCC: 3 | RNVC: 2
FL202461: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-243-6150

5120-14-276-3079
Socket Wrench Socket

142763079
NO PRIMARY REF14-276-3079: RNCC: 3 | RNVC: 2
0051280: RNCC: 5 | RNVC: 2
R.8L: RNCC: 5 | RNVC: 2
R8L: RNCC: 5 | RNVC: 2
91396445: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-365-6507
Screwdriver Bit

143656507
4-815015: RNCC: 3 | RNVC: 2
000-12: RNCC: 5 | RNVC: 2
545-69: RNCC: 5 | RNVC: 2

8 Oct 1980

5120-14-460-9703
Pedal Adjustment Tool Compressor

144609703
8-0804: RNCC: 3 | RNVC: 2

17 Feb 1993

5120-14-458-6723
Hand Screw Starter

144586723
AFU.1: RNCC: 3 | RNVC: 2
3148510056623: RNCC: 5 | RNVC: 2
H24169: RNCC: 5 | RNVC: 2
0005662: RNCC: 5 | RNVC: 9
AFU.1: RNCC: 5 | RNVC: 9

29 Oct 1992

5120-14-308-2176

5120-14-245-3542

5120-14-574-4538
Wrench Kit

145744538
402989: RNCC: 3 | RNVC: 2

22 Jan 2013

5120-14-230-5522

5120-14-220-8563
Cle A Creneaux Spec

142208563
PR46856: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-255-2484

5120-14-423-2816
Screwdriver Handle

144232816
NO PRIMARY REF14-423-2816: RNCC: 3 | RNVC: 2
91569698: RNCC: 5 | RNVC: 2
0008020: RNCC: 5 | RNVC: 2
AMR.M: RNCC: 5 | RNVC: 2
AMRM: RNCC: 5 | RNVC: 2

14 Apr 1988

5120-14-389-7560
Hand Terminal Crimping Tool

143897560
8460: RNCC: 3 | RNVC: 2
85-691-4217: RNCC: 6 | RNVC: 9

20 Dec 1983

5120-14-466-2590
Wrench Extension Handle

144662590
0XB501-529-700-01: RNCC: 3 | RNVC: 2

3 Nov 1993

5120-14-483-1198
Socket Wrench Socket

144831198
J.3/4LA: RNCC: 3 | RNVC: 2
3148510283913: RNCC: 5 | RNVC: 2
0028391: RNCC: 5 | RNVC: 9

9 Aug 1996

5120-14-290-4520
Open End Wrench

142904520
09-8: RNCC: 3 | RNVC: 2
09-8: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-352-4886
Socket Head Screw Key

143524886
0124470: RNCC: 3 | RNVC: 2
83.9/64: RNCC: 5 | RNVC: 2
83 9-64: RNCC: 5 | RNVC: 2

16 Oct 1978

5120-14-322-9493

5120-14-396-2228
Rotation Moteur Cle

143962228
230303: RNCC: 3 | RNVC: 2

27 Nov 1984

5120-14-208-0982

5120-14-278-4807

5120-14-489-8742
Solid Center Punch

144898742
NO PRIMARY REF 14-489-8742: RNCC: 3 | RNVC: 2
500.0.10: RNCC: 5 | RNVC: 9

27 Aug 1997

5120-14-426-1883
Special Tournevis

144261883
VG-100-60: RNCC: 3 | RNVC: 2
40F0001205: RNCC: 5 | RNVC: 2
VG10060: RNCC: 5 | RNVC: 2
85-694-7599: RNCC: 6 | RNVC: 9

4 Aug 1988

5120-14-386-6814
Socket Wrench Socket

143866814
853-100-090-0: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-464-4934
Evasage Mandrin

144644934
851-930-347-0: RNCC: 3 | RNVC: 2

4 Aug 1993

5120-14-396-4270
A Riveter Poincon

143964270
AA7,62NF1-1686: RNCC: 3 | RNVC: 2
AA7-62NF1-1686: RNCC: 5 | RNVC: 2

27 Nov 1984

5120-14-466-5143
Socket Wrench Socket

144665143
OCE 83.30 E: RNCC: 3 | RNVC: 2
1131523W00: RNCC: 5 | RNVC: 2
91727002: RNCC: 5 | RNVC: 2
0CE83-30E: RNCC: 5 | RNVC: 2
30E: RNCC: 5 | RNVC: 2
83.30 E: RNCC: 5 | RNVC: 2
OCE83-30E: RNCC: 5 | RNVC: 2

15 Nov 1993

5120-14-215-9630
Cle A Panier Hexago

142159630
773-411-003F5-30SURPLATS: RNCC: 3 | RNVC: 2
773-411-003FF5-30SURPLATS: RNCC: 5 | RNVC: 9
773-411-003F5-30SURPLATS: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-220-5147
Tas De Montage

142205147
3160-95-33-004-1: RNCC: 3 | RNVC: 2
3160S95-33-004-1: RNCC: 5 | RNVC: 2

1 Jan 1965

5120-14-315-5130
Montage Joint Cle

143155130
682: RNCC: 3 | RNVC: 2
50574-01: RNCC: 5 | RNVC: 2
15845-1: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-568-0058
Socket Head Screw Key

145680058
14100074937: RNCC: 3 | RNVC: 2

3 May 2011

5120-14-454-2951
Emmanchement Outil

144542951
MMG052-31: RNCC: 3 | RNVC: 2
MMG052-31: RNCC: 5 | RNVC: 2

26 Mar 1992

5120-14-335-9260
Chemise Extracteur

143359260
20431J: RNCC: 3 | RNVC: 2

24 Jul 1976

5120-14-430-1008
Spanner Wrench

144301008
6814-58528: RNCC: 3 | RNVC: 2

1 Mar 1989

5120-14-247-1640
Spanner Wrench

142471640
NO PRIMARY REF14-247-1640: RNCC: 3 | RNVC: 2
0A97: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-424-3424
Socket Head Screw Key

144243424
E74331A3U: RNCC: 2 | RNVC: 2
E74331-3AU: RNCC: 5 | RNVC: 2

19 May 1988

5120-14-232-6814

5120-14-219-2153

5120-14-276-9953

5120-14-562-6743
Seal Inserter

145626743
0016208: RNCC: 3 | RNVC: 2

13 Nov 2009

5120-14-228-5929

5120-14-354-8662
Open End Wrench

143548662
187553: RNCC: 3 | RNVC: 2

20 Feb 1979

5120-14-362-6840
Outil A Freiner

143626840
9970-125-080: RNCC: 3 | RNVC: 2

19 Mar 1980

5120-14-239-4181
Adjustable Wrench

142394181
A10-95-914-02-0: RNCC: 3 | RNVC: 2
A10-95-914-02-0: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-247-8227
Outil Montage-Demon

142478227
579104006: RNCC: 3 | RNVC: 2
597104: RNCC: 5 | RNVC: 9
597104-1: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-355-3462
Detent Handling Tool

143553462
330A98-2167-00: RNCC: 3 | RNVC: 2

19 Mar 1979

5120-14-254-0714
Open End Wrench

142540714
NO PRIMARY REF14-254-0714: RNCC: 3 | RNVC: 2
26-20X32: RNCC: 5 | RNVC: 9

1 Jan 1969

5120-14-534-3254
Spring Inserter And Remover

145343254
NNM0021010400225: RNCC: 2 | RNVC: 2

19 Mar 2003

5120-14-392-0818
Socket Wrench Crowfoot Attachment

143920818
853-100-017-0: RNCC: 3 | RNVC: 2

21 Mar 1984

5120-14-389-2191
Cle A Fourch Embout

143892191
M34021: RNCC: 3 | RNVC: 2
85-692-3948: RNCC: 6 | RNVC: 9

29 Nov 1983

5120-14-404-3014
Appareil De Decheva

144043014
851-200-124-0: RNCC: 3 | RNVC: 2

23 Sep 1985

5120-14-324-4918
Bague De Retreint

143244918
S16-0606-1350: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-569-3776
Screw Thread Insert Inserter

145693776
TM-10: RNCC: 3 | RNVC: 2

8 Sep 2011

5120-14-559-6967
Flat Tip Screwdriver

145596967
8813233000: RNCC: 3 | RNVC: 2

6 Feb 2009

5120-14-232-9177
Cle Speciale

142329177
R108774: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-396-7178

5120-14-283-9735
Cliquet

142839735
M3-093-10: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-221-8797
Arrache Sangle

142218797
9970-115-077: RNCC: 3 | RNVC: 2
171-277: RNCC: 5 | RNVC: 2

1 Jan 1966

5120-14-376-2278
Demi-Coquille

143762278
NO PRIMARY REF14-376-2278: RNCC: 3 | RNVC: 2
0U130968: RNCC: 5 | RNVC: 9

30 Mar 1982

5120-14-374-0869
Socket Wrench Crowfoot Attachment

143740869
UHD304-44: RNCC: 3 | RNVC: 2

8 Dec 1981

5120-14-440-5377
Bearing And Bushing Inserter And Remover

144405377
0-601710-1: RNCC: 3 | RNVC: 2
85-694-0204: RNCC: 6 | RNVC: 9

17 Jul 1990

5120-14-446-8351
Socket Wrench Socket

144468351
K.1'1/8LA: RNCC: 3 | RNVC: 2
3148510304854: RNCC: 5 | RNVC: 2
K1 1-8LA: RNCC: 5 | RNVC: 2
0030485: RNCC: 5 | RNVC: 9

17 Apr 1991

5120-14-315-6209
Tas A River

143156209
BR66-90-069A2-3: RNCC: 3 | RNVC: 2
BR66-90-069A2-3: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-318-3118
Compresseur Equipe

143183118
CV15-206330-1: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-294-0762
Blacksmith's Anvil

142940762
3825-150K: RNCC: 3 | RNVC: 9

1 Jan 1973

5120-14-268-6977
Cle Tubulaire Speci

142686977
360-1P2: RNCC: 3 | RNVC: 9
PA360-1P2: RNCC: 5 | RNVC: 9

1 Jan 1970

5120-14-367-9809
Screwdriver Bit

143679809
262BD: RNCC: 3 | RNVC: 2
TD36: RNCC: 3 | RNVC: 2
85-691-4320: RNCC: 6 | RNVC: 9

19 Jan 1981

5120-14-528-4691
Face Spanner Wrench Socket

145284691
888-468-200-1: RNCC: 3 | RNVC: 2
888-468-200-1: RNCC: 5 | RNVC: 2

30 Jan 2002

5120-14-574-4296
Socket Head Screw Key

145744296
8818384106: RNCC: 3 | RNVC: 2

18 Jan 2013

5120-14-274-8666

5120-14-441-2345
Bearing And Bushing Inserter And Remover

144412345
6812V32-2428-00: RNCC: 3 | RNVC: 2

22 Aug 1990

5120-14-253-4533
Spanner Wrench

142534533
321-95-0008: RNCC: 3 | RNVC: 2
321A95-0008-00: RNCC: 5 | RNVC: 2
08-389: RNCC: 5 | RNVC: 2
85-628-7840: RNCC: 6 | RNVC: 9

1 Jan 1968

5120-14-565-6973
Mechanical Puller Adapter

145656973
U.53E10: RNCC: 3 | RNVC: 2
0070358: RNCC: 5 | RNVC: 2
3148510703589: RNCC: 5 | RNVC: 2

16 Sep 2010

5120-14-265-9580
Tete Pour Pince A S

142659580
69065: RNCC: 3 | RNVC: 2
781017: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-585-5362

5120-14-241-1467
Cle A Ergots Specia

142411467
0648-78: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-395-7146

5120-14-247-2030

5120-14-303-6422
Torque Wrench Adapter

143036422
D0-8: RNCC: 3 | RNVC: 2
3272670213340: RNCC: 5 | RNVC: 2
D08: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-488-3173
Socket Wrench Socket

144883173
R.12LA: RNCC: 3 | RNVC: 2
0051325: RNCC: 5 | RNVC: 2
3148510513256: RNCC: 5 | RNVC: 2
R12LA: RNCC: 5 | RNVC: 2
235-4028: RNCC: 5 | RNVC: 2
FACOMR.12LA: RNCC: 5 | RNVC: 9

30 Apr 1997

5120-14-475-6127
Flat Tip Screwdriver

144756127
D32: RNCC: 3 | RNVC: 2
1-32-01: RNCC: 5 | RNVC: 2
85-670-7620: RNCC: 6 | RNVC: 9

19 Apr 1995

5120-14-433-3087
Slip Joint Pliers

144333087
853-202-434-0: RNCC: 3 | RNVC: 2

19 Jul 1989

5120-14-568-8331
Seal Inserter

145688331
888-566-700-1: RNCC: 3 | RNVC: 2

8 Jul 2011

5120-14-225-5726
Spanner Wrench

142255726
SPE125S001: RNCC: 3 | RNVC: 2
125-103-71: RNCC: 5 | RNVC: 2

1 Jan 1966

5120-14-440-8021
Cle Dextration

144408021
Y085-008-000A: RNCC: 3 | RNVC: 2

25 Jul 1990

5120-14-391-8408
Crowfoot Socket Wrench Head Socket Adapter

143918408
TMY20-27-302-2: RNCC: 3 | RNVC: 2

21 Mar 1984

5120-14-416-8107
Commande Guignol

144168107
ML0150105: RNCC: 3 | RNVC: 2
ML0150105: RNCC: 5 | RNVC: 2
ML015-01-05: RNCC: 5 | RNVC: 2

25 Jun 1987

5120-14-475-8872
Socket Wrench Screwdriver Attachment

144758872
NO PRIMARY REF14-475-8872: RNCC: 3 | RNVC: 2
0053361: RNCC: 5 | RNVC: 2
RTC.6: RNCC: 5 | RNVC: 2
18509471-0: RNCC: 5 | RNVC: 2

10 May 1995

5120-14-375-3128
Spanner Wrench

143753128
A33454N: RNCC: 3 | RNVC: 2

26 Feb 1982

5120-14-201-8788
Open End Wrench

142018788
10-18X20: RNCC: 3 | RNVC: 2

1 Jan 1962

5120-14-442-8080
Socket Wrench Socket Set

144428080
GS89SV: RNCC: 3 | RNVC: 2
GS89S: RNCC: 5 | RNVC: 2

6 Nov 1990

5120-14-554-5307
Screwdriver Bit

145545307
639568: RNCC: 3 | RNVC: 2
3148516395689: RNCC: 3 | RNVC: 2
ECAR101: RNCC: 5 | RNVC: 2

18 Jul 2007

5120-14-459-2280
Cross Tip Screwdriver

144592280
3130TFC3: RNCC: 3 | RNVC: 2

19 Nov 1992

5120-14-437-9664
Hand Tube Flaring Tool Parts Kit

144379664
M20742: RNCC: 3 | RNVC: 2
M20742: RNCC: 3 | RNVC: 9

28 Feb 1990

5120-14-237-3329
Spanner Wrench

142373329
H90R1016: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-326-7474
Spanner Wrench

143267474
401MA0013REP66: RNCC: 3 | RNVC: 2
401MA013REP66: RNCC: 5 | RNVC: 2

2 Jul 1975

5120-14-348-3832
Spanner Wrench

143483832
D47572: RNCC: 3 | RNVC: 2

29 Mar 1978

5120-14-532-4826
Socket Wrench Handle

145324826
RA151A: RNCC: 3 | RNVC: 2

6 Nov 2002

5120-14-539-2812
Socket Wrench Socket

145392812
56149902: RNCC: 3 | RNVC: 2

17 Dec 2003

5120-14-538-0474
Screwdriver Bit

145380474
EXR.125: RNCC: 3 | RNVC: 2
3148510258874: RNCC: 5 | RNVC: 2

9 Dec 2003

5120-14-220-8462
Adjustable Wrench

142208462
BBW152: RNCC: 3 | RNVC: 9

1 Jan 1965

5120-14-274-8680
Bague De Cone

142748680
R31674-18-18R26: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-545-4118
Socket Wrench Socket

145454118
703A94-6103-20: RNCC: 3 | RNVC: 2

12 Apr 2005

5120-14-368-5444
Socket Wrench Socket

143685444
TMD9: RNCC: 3 | RNVC: 2
TMD9: RNCC: 5 | RNVC: 2
85-691-5268: RNCC: 6 | RNVC: 9

20 Feb 1981

5120-14-514-8409
Cross Tip Screwdriver

145148409
ENFD6569-0X200: RNCC: 3 | RNVC: 2

21 Jun 1999

5120-14-425-0996
Flat Tip Screwdriver Set

144250996
4840: RNCC: 3 | RNVC: 2
4840: RNCC: 5 | RNVC: 2
85-693-7841: RNCC: 6 | RNVC: 9

21 Jun 1988

5120-14-438-4985
Torque Wrench Adapter

144384985
MHD531-21: RNCC: 3 | RNVC: 2
85-694-0421: RNCC: 6 | RNVC: 9

21 Mar 1990

5120-14-488-9478
Socket Wrench Handle Bar

144889478
38148: RNCC: 3 | RNVC: 2

13 Jun 1997

5120-14-535-7333
Socket Wrench Spanner Attachment

145357333
8039204A00: RNCC: 3 | RNVC: 2

25 Jun 2003

5120-14-478-3315
Screwdriver Bit

144783315
EH.110: RNCC: 3 | RNVC: 2
3148510233802: RNCC: 5 | RNVC: 2
0237693D00: RNCC: 5 | RNVC: 2
0023380: RNCC: 5 | RNVC: 9

25 Oct 1995

5120-14-420-1004
Face Spanner Wrench Socket

144201004
8813865002: RNCC: 3 | RNVC: 2

18 Nov 1987

5120-14-437-4312
Spanner Wrench

144374312
16849443: RNCC: 3 | RNVC: 2
16849443: RNCC: 5 | RNVC: 9

31 Jan 1990

5120-14-278-7845
Socket Wrench Socket

142787845
M.80: RNCC: 3 | RNVC: 2
3148510319407: RNCC: 5 | RNVC: 2
M80: RNCC: 5 | RNVC: 2
0031940: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-315-1882
Outil Rodage Joint

143151882
0-79440-2: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-557-1860
Socket Wrench Socket

145571860
RHC-5: RNCC: 3 | RNVC: 2

23 May 2008

5120-14-245-7090

5120-14-240-4201

5120-14-355-2086

5120-14-572-4836
Torque Wrench Adapter

145724836
13.15: RNCC: 3 | RNVC: 2

9 Jul 2012

5120-14-479-4148
Outil Embout

144794148
46AM109: RNCC: 3 | RNVC: 2

10 Jan 1996

5120-14-484-8542
Face Spanner Wrench Socket

144848542
0UT128: RNCC: 3 | RNVC: 2
OUT128: RNCC: 5 | RNVC: 2

12 Dec 1996

5120-14-379-4429
Face Spanner Wrench Socket

143794429
B51829G: RNCC: 3 | RNVC: 2

1 Oct 1982

5120-14-436-0273
Preformed Packing Inserter

144360273
RT30299: RNCC: 3 | RNVC: 2

29 Nov 1989

5120-14-401-9609
Socket Wrench Spanner Attachment

144019609
16380152: RNCC: 3 | RNVC: 2
16380152: RNCC: 5 | RNVC: 9

26 Jun 1985

5120-14-457-5825
Mechanical Puller Attachment

144575825
45057955: RNCC: 3 | RNVC: 2
45057955: RNCC: 5 | RNVC: 9

10 Sep 1992

5120-14-234-4301
Plaque Speciale

142344301
940842: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-283-3907
Etrier Obturateur

142833907
9970-111-123: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-423-2296
Basculeur Cle Dyn

144232296
0747171: RNCC: 3 | RNVC: 2
SP1735D-3-1200: RNCC: 5 | RNVC: 2
SP.1735 D-3-1200: RNCC: 5 | RNVC: 2

13 Apr 1988

5120-14-568-3019
Hand Tube Bender

145683019
TBC-404: RNCC: 3 | RNVC: 2
TBC-404: RNCC: 5 | RNVC: 2

23 May 2011

5120-14-300-9507
Trepied Verin

143009507
341A91-0056-10: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-427-7600
Spanner Wrench

144277600
NO PRIMARY REF14-427-7600: RNCC: 3 | RNVC: 2
E0949604: RNCC: 5 | RNVC: 9

9 Nov 1988

5120-14-232-7187
Hand Terminal Crimping Tool

142327187
69062-2: RNCC: 3 | RNVC: 2
69062: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-363-5836
Socket Wrench Socket

143635836
S.20H: RNCC: 3 | RNVC: 2
SH-20: RNCC: 3 | RNVC: 2
SH20: RNCC: 3 | RNVC: 2
3203020: RNCC: 3 | RNVC: 2
S20H: RNCC: 5 | RNVC: 2
3272670264076: RNCC: 5 | RNVC: 2
0712 131 120: RNCC: 5 | RNVC: 2
3148510540207: RNCC: 5 | RNVC: 2
0054020: RNCC: 5 | RNVC: 9

9 May 1980

5120-14-362-6844
Outil A Freiner

143626844
9970-125-184: RNCC: 3 | RNVC: 2

19 Mar 1980

5120-14-488-3119
Socket Head Screw Key

144883119
82H.5/64: RNCC: 3 | RNVC: 2
82H5-64: RNCC: 5 | RNVC: 2
0123441: RNCC: 5 | RNVC: 2
3148511234419: RNCC: 5 | RNVC: 2
0715 311 26: RNCC: 5 | RNVC: 2

30 Apr 1997

5120-14-446-8350
Socket Wrench Socket

144468350
K.1'1/4LA: RNCC: 3 | RNVC: 2
3148510305059: RNCC: 5 | RNVC: 2
K1 1-4LA: RNCC: 5 | RNVC: 2
0030505: RNCC: 5 | RNVC: 9

17 Apr 1991

5120-14-261-5293
Torque Wrench Adapter

142615293
D-26: RNCC: 3 | RNVC: 2
D26: RNCC: 3 | RNVC: 2
3272670271272: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-241-1636
Matrice Montee Conn

142411636
8459-122: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-430-2637
Spanner Wrench

144302637
900292: RNCC: 3 | RNVC: 2
905478-1AREP11: RNCC: 3 | RNVC: 2

15 Mar 1989

5120-14-391-8617
Spanner Wrench

143918617
MHS447-24: RNCC: 3 | RNVC: 2

21 Mar 1984

5120-14-325-4818
Faux Mors

143254818
S10-0152-0982: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-302-7874
Socket Wrench Socket

143027874
NO PRIMARY REF14-302-7874: RNCC: 3 | RNVC: 2
SA1039A: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-385-3135
Out Mise Fais Appui

143853135
360A93-3300-11: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-369-7959
Socket Wrench Adapter

143697959
30AM013-0000020: RNCC: 3 | RNVC: 2

17 Apr 1981

5120-14-327-4596
Swivel Knob Jeweler's Screwdriver

143274596
0010900: RNCC: 3 | RNVC: 2
ARE0-7X10: RNCC: 5 | RNVC: 2

2 Jul 1975

5120-14-441-2365
Spanner Wrench

144412365
703A93-0040-20: RNCC: 3 | RNVC: 2

22 Aug 1990

5120-14-224-9898
Open End Wrench

142249898
10A26: RNCC: 3 | RNVC: 2
M6-023: RNCC: 5 | RNVC: 2
253994: RNCC: 5 | RNVC: 9

1 Jan 1966

5120-14-440-8018
Spanner Wrench

144408018
Y075-042-100A: RNCC: 3 | RNVC: 2

25 Jul 1990

5120-14-201-9936
Screwdriver Bit

142019936
S260: RNCC: 3 | RNVC: 2

1 Jan 1962

5120-14-419-6708
Face Spanner Wrench Socket

144196708
24545899900: RNCC: 3 | RNVC: 2
440724: RNCC: 5 | RNVC: 9
245458999: RNCC: 5 | RNVC: 9

30 Oct 1987

5120-14-214-4146

5120-14-371-9906
Cle Speciale

143719906
25145061000: RNCC: 3 | RNVC: 2
251450610: RNCC: 5 | RNVC: 9

5 Aug 1981

5120-14-298-4547
Pliers

142984547
404: RNCC: 3 | RNVC: 2
5159-12: RNCC: 3 | RNVC: 2
91352590: RNCC: 5 | RNVC: 2
3148511750902: RNCC: 5 | RNVC: 2
0175090: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-422-2344
Spanner Wrench

144222344
0436-01-137000: RNCC: 3 | RNVC: 2

24 Feb 1988

5120-14-368-6798
Combination Box And Open End Wrench

143686798
40.30L: RNCC: 3 | RNVC: 2
3148511011515: RNCC: 5 | RNVC: 2
40-30L: RNCC: 5 | RNVC: 2
1122885E00: RNCC: 5 | RNVC: 2
91635693: RNCC: 5 | RNVC: 2
0101151: RNCC: 5 | RNVC: 9
40.30L: RNCC: 5 | RNVC: 9

20 Feb 1981

5120-14-567-1894
Socket Wrench Screwdriver Attachment

145671894
SHP.10LA: RNCC: 3 | RNVC: 2
3148516593405: RNCC: 5 | RNVC: 2
659340: RNCC: 5 | RNVC: 2

21 Feb 2011

5120-14-562-9592
Screwdriver Bit

145629592
EX.625: RNCC: 3 | RNVC: 2
EX.625: RNCC: 5 | RNVC: 2
3148510258669: RNCC: 5 | RNVC: 2

8 Dec 2009

5120-14-281-7616
Mandrin De Montage

142817616
A122140: RNCC: 3 | RNVC: 2
100073: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-276-3090
Socket Wrench Socket

142763090
R.13/32: RNCC: 3 | RNVC: 2
H24161: RNCC: 5 | RNVC: 2
3148510509402: RNCC: 5 | RNVC: 2
R13-32: RNCC: 5 | RNVC: 2
R13-32: RNCC: 5 | RNVC: 2
3272670260412: RNCC: 5 | RNVC: 2
R-13/32: RNCC: 5 | RNVC: 2
R.13/32: RNCC: 5 | RNVC: 9
0050940: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-406-5676
Demontage Outil

144065676
853-200-763-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-454-9496
Flat Tip Screwdriver

144549496
AEF.3,5X75: RNCC: 3 | RNVC: 2
3148510048963: RNCC: 5 | RNVC: 2
AEF3-5X75: RNCC: 5 | RNVC: 2
104-4152: RNCC: 5 | RNVC: 2
0613 460 09: RNCC: 5 | RNVC: 2
004896: RNCC: 5 | RNVC: 9
FACOMAEF.3,5X75: RNCC: 5 | RNVC: 9

29 Apr 1992

5120-14-298-4570
Socket Head Screw Key

142984570
84.7/32: RNCC: 3 | RNVC: 2
3148511253403: RNCC: 5 | RNVC: 2
84 7-32: RNCC: 5 | RNVC: 2
0125340: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-212-9144
Socket Wrench Handle Bar

142129144
9970-115-000: RNCC: 3 | RNVC: 2
9970-115-000-00: RNCC: 5 | RNVC: 2

1 Jan 1964

5120-14-325-4815
Faux Mors

143254815
S10-0150-0381: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-376-4993
Open End Wrench

143764993
004927001S: RNCC: 3 | RNVC: 2

28 Apr 1982

5120-14-232-6822
Hand Terminal Crimping Tool

142326822
46073: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-264-9611
Spanner Wrench

142649611
0585-78: RNCC: 3 | RNVC: 2
RA585: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-303-7079

5120-14-406-6418
Joints Emmanche

144066418
OUT9362: RNCC: 3 | RNVC: 2
0UT9362: RNCC: 5 | RNVC: 2

8 Jan 1986

5120-14-379-4894
Immobilis Tarag Tir

143794894
7M141G4: RNCC: 3 | RNVC: 2

1 Oct 1982

5120-14-439-6209
Bearing And Bushing Inserter

144396209
6801G31-1343-20: RNCC: 3 | RNVC: 2

16 May 1990

5120-14-272-3946
Combination Box And Open End Wrench

142723946
40.35L: RNCC: 3 | RNVC: 2
50-35: RNCC: 3 | RNVC: 2
91386914: RNCC: 5 | RNVC: 2
3148511011560: RNCC: 5 | RNVC: 2
40-35L: RNCC: 5 | RNVC: 2
0224471F00: RNCC: 5 | RNVC: 2
3272670267312: RNCC: 5 | RNVC: 2
91453733: RNCC: 5 | RNVC: 2
0101156: RNCC: 5 | RNVC: 9
40-35: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-353-7438
Spanner Wrench

143537438
701259-01: RNCC: 3 | RNVC: 2
701-259-01: RNCC: 5 | RNVC: 9
11-701-259-00: RNCC: 5 | RNVC: 9

16 Jan 1979

5120-14-304-3773
Socket Wrench Handle Bar

143043773
Y010-001: RNCC: 3 | RNVC: 2
Y010-001-000: RNCC: 3 | RNVC: 2
80900-560: RNCC: 5 | RNVC: 2

1 Jan 1974

5120-14-260-5568
Tube Dextracteur Co

142605568
8500-1163 021: RNCC: 3 | RNVC: 2
8500-1163: RNCC: 5 | RNVC: 1

1 Jan 1970

5120-14-212-8197
Adjustable Wrench

142128197
65-12X100MM: RNCC: 3 | RNVC: 2
65-12X100MM: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-349-8820
Open End Wrench

143498820
10A44: RNCC: 3 | RNVC: 2
71-44: RNCC: 3 | RNVC: 2
RACC44: RNCC: 3 | RNVC: 2
1974: RNCC: 5 | RNVC: 2

14 Jun 1978

5120-14-426-3902
Socket Head Screw Key

144263902
83131-9801552: RNCC: 3 | RNVC: 2
91600632: RNCC: 5 | RNVC: 2

25 Aug 1988

5120-14-391-2073
Socket Wrench Socket

143912073
M100: RNCC: 3 | RNVC: 2
3148510319988: RNCC: 5 | RNVC: 2

1 Mar 1984

5120-14-578-1976
Mechanical Puller S

145781976
8819653004: RNCC: 3 | RNVC: 2

12 Nov 2013

5120-14-442-2414
Cle A Creneaux

144422414
PR46874: RNCC: 3 | RNVC: 2

3 Oct 1990

5120-14-419-2667
Hand Material Handling Hook

144192667
536677: RNCC: 3 | RNVC: 2

16 Oct 1987

5120-14-490-8791
Tournev

144908791
4065 200 000 680: RNCC: 3 | RNVC: 2
F300 0T 000 5061: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-560-0541
Face Spanner Wrench Socket

145600541
14100049191: RNCC: 3 | RNVC: 2

17 Mar 2009

5120-14-224-9886

5120-14-490-6853
Drill

144906853
240 D 01017 000: RNCC: 3 | RNVC: 2
F300 0T 000 0957: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-273-6949
Marteau A Mai Corps

5120-14-220-8387
Socket Wrench Crowfoot Attachment

142208387
17-9-60: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-530-5806
Bearing And Bushing Inserter And Remover

145305806
U.49AD6: RNCC: 3 | RNVC: 2
3148510702414: RNCC: 5 | RNVC: 2
U.49D6: RNCC: 5 | RNVC: 2

25 Jun 2002

5120-14-256-0109
Cle A Crans

142560109
200625: RNCC: 3 | RNVC: 2

1 Jan 1969

5120-14-491-4485
Pochoir

144914485
1820A25: RNCC: 3 | RNVC: 2
F300 0T 002 9985: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-471-0836
Cle Pour Ipd

144710836
1060538: RNCC: 3 | RNVC: 2
RAB3409: RNCC: 5 | RNVC: 2

26 Jul 1994

5120-14-041-5108

5120-14-281-3878
Cle Triangulaire Sp

142813878
16127595: RNCC: 3 | RNVC: 2
16127595: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-286-7381

5120-14-286-7822

5120-14-277-1162
Electronic Equipment Alignment Tool

142771162
NO PRIMARY REF14-277-1162: RNCC: 3 | RNVC: 2
D10-2122-46A: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-376-1485
Flat Tip Screwdriver

143761485
NO PRIMARY REF14-376-1485: RNCC: 3 | RNVC: 2
ARN4X200: RNCC: 5 | RNVC: 2

30 Mar 1982

5120-14-485-7327
Mechanical Puller Attachment

144857327
332A93-1181-20: RNCC: 3 | RNVC: 2

6 Feb 1997

5120-14-321-8507
Spanner Wrench

143218507
6521770: RNCC: 3 | RNVC: 2
6521770: RNCC: 5 | RNVC: 1
85-626-7192: RNCC: 6 | RNVC: 9

1 Jan 1975

5120-14-469-8611
Socket Head Screw Key

144698611
83.S7: RNCC: 3 | RNVC: 2
0123824: RNCC: 3 | RNVC: 2
0715 31 23: RNCC: 5 | RNVC: 2

16 May 1994

5120-14-316-6563
Tube Fitting Wrenching Socket

143166563
3599001: RNCC: 3 | RNVC: 2
3599001: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-510-7161
Socket Wrench Screwdriver Attachment

145107161
SHP.5EL: RNCC: 3 | RNVC: 2
0715 137 051: RNCC: 5 | RNVC: 2
SHP5EL: RNCC: 5 | RNVC: 9

9 Nov 1998

5120-14-451-0452
Piston Ring Expander

144510452
02240903900: RNCC: 3 | RNVC: 2
59579836: RNCC: 5 | RNVC: 2
M592740: RNCC: 5 | RNVC: 2

28 Oct 1991

5120-14-516-7131
Spanner Wrench

145167131
56094524: RNCC: 3 | RNVC: 2

13 Oct 1999

5120-14-208-0981

5120-14-565-6559
Screw Push-Pull Jack

145656559
AVS2B2513: RNCC: 3 | RNVC: 2

13 Sep 2010

5120-14-329-9292

5120-14-273-7534
Pliers

142737534
92: RNCC: 5 | RNVC: 9
1501-16: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-539-2644
Mechanical Puller Attachment

145392644
T632G3016121: RNCC: 3 | RNVC: 2

17 Dec 2003

5120-14-419-2602
Poignee De Montage

144192602
530618: RNCC: 3 | RNVC: 2

16 Oct 1987

5120-14-350-5342
Flat Tip Screwdriver Set

143505342
525274: RNCC: 3 | RNVC: 2

12 Jul 1978

5120-14-411-1981
Extract Support Dio

144111981
0-52280-1: RNCC: 3 | RNVC: 2

6 Aug 1986

5120-14-266-7006

5120-14-225-4017

5120-14-237-9511

5120-14-365-9722
Jet Montage Porte J

143659722
365A93-3204-20: RNCC: 3 | RNVC: 2

21 Feb 1996

5120-14-487-5734
Open End Wrench

144875734
K7739-12108-3/8BSX7/16BS: RNCC: 3 | RNVC: 2
K7739-12108-5/16WX3/8W: RNCC: 3 | RNVC: 2
12108-3/8BSX7/16BS: RNCC: 5 | RNVC: 2
12108-5/16WX3/8W: RNCC: 5 | RNVC: 2

10 Apr 1997

5120-14-204-8889
Quick Adjusting Screw Clamp

142048889
25-2-1250: RNCC: 3 | RNVC: 2

1 Jan 1963

5120-14-465-4702
Face Spanner Wrench Socket

144654702
851-500-147-0: RNCC: 3 | RNVC: 2

30 Sep 1993

5120-14-245-9069
Collier Pour Evasem

142459069
7062BA1C0LLIERT1-25: RNCC: 3 | RNVC: 9

1 Jan 1968

5120-14-574-8273
Socket Wrench

145748273
8003657: RNCC: 3 | RNVC: 2

20 Feb 2013

5120-14-291-6201
Outil Insertion Cou

142916201
8500-93: RNCC: 3 | RNVC: 2
8500-93: RNCC: 5 | RNVC: 9

1 Jan 1972

Load More Results