What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.

A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Blacksmith's Punch?

A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Mechanical Finger?

A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.

A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Screwdriver And Wrench Assembly?

A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Stakeholder Bench Plate?

A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.

What is a Drill Drift?

A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.

A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Digging Bar?

A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

What is a Valve Spring Lifter?

A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.

What is a Fuse Puller?

A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.

Hand Tools, Nonedged, Nonpowered - France (FR)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by France (FR) - NCB is 14

Page 34 of 110

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by France

51	20	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - France (FR)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 16 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Pipe Vise? 19 Items: A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.
What is a Hand Vise? 25 Items: A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.
What is a Hand Hydraulic Jack? 133 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 153 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 903 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 17 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
Swage,Bottom,Blacksmith's 10 Items
What is a Hand Tube Flaring Tool? 23 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Blacksmith's Punch? 12 Items: A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.
What is a Drain Plug Wrench? 45 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 57 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 16 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 3829 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
Flatter,Blacksmith's 18 Items
Swage,Top,Blacksmith's 12 Items
What is a Pipe Wrench? 110 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 149 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 53 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
Screwdriver,Offset 54 Items
What is a Screwdriver Bit? 707 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Mechanical Finger? 25 Items: A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.
What is a Socket Wrench Socket? 1803 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 1412 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 1641 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 52 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 565 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
Jack,Push-Pull,Screw 30 Items
What is a Hand Tube Bender? 54 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 1106 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 55 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pinch Bar? 19 Items: A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.
What is a Pry Bar? 17 Items: A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.
What is a Wrecking Bar? 15 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 273 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 413 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 32 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 295 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
Face,Hammer,Inserted 25 Items
What is a Hole Sheet Metal Holder? 37 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Screwdriver And Wrench Assembly? 11 Items: A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.
What is a Hand Rivet Set? 121 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Stakeholder Bench Plate? 22 Items: A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.
What is a Drill Drift? 32 Items: A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.
What is a Tack Claw? 15 Items: A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.
Mattock 28 Items
What is a Socket Wrench Handle Bar? 108 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Stake,Sheet Metalworking 50 Items
Riveter,Blind,Hand 76 Items
What is a Hand Shovel? 43 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 98 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 30 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
What is a Digging Bar? 20 Items: A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.
Block,Dolly,Sheet Metalworking 56 Items
What is a Piston Ring Compressor? 34 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Valve Spring Lifter? 29 Items: A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.
What is a Fuse Puller? 20 Items: A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.
What is a Hand Lead Seal Press? 18 Items: A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.
What is a Hand Beading Tool? 91 Items: A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.
What is a Hand Hammer? 502 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
Head,Hand Hammer 81 Items
What is a Lamp Extractor? 76 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Tube Packing Ring Installing Tool? 29 Items: A Tube Packing Ring Installing Tool (INSTALLING TOOL,TUBE PACKING RING) is an item designed to insert packing rings on tubes within tube sheets on condensers and similar heat exchangers. In operation, the packing rings are assembled on the loading pin mandrel and are then transferred from the mandrel on to the tube by means of a tubular sleeve which slides on the mandrel.
What is a Carpenters' Pincers? 18 Items: A Carpenters' Pincers (PINCERS,CARPENTERS') is a plierlike hand tool having two opposing jaws which may have hammerlike backs. One handle has a nail or tack pulling claw, the other is shaped to form a screwdriver. The tool may contain a wire cutter. See also NIPPERS, END CUTTING and PINCERS, FARRIERS'.
What is a Trowel? 33 Items: A Trowel is a tool used for bricklaying, concrete work, plastering, linoleum laying, and masonry work. Excludes CORNER TOOL, CONCRETE.
What is a Hand Abrasive Wheel Dresser? 12 Items: A Hand Abrasive Wheel Dresser (DRESSER,ABRASIVE WHEEL,HAND) is a tool designed to remove glaze from, dress, shape, sharpen, and true solid abrasive wheels. Excludes NIB, DIAMOND, WHEEL DRESSING.
What is a Lamp Cap Extractor? 32 Items: A Lamp Cap Extractor (EXTRACTOR,LAMP CAP) is a tool specifically designed to facilitate the removal of lamp caps from switchboards, panels or indicator lamps.
What is a Rivet Bucking Bar? 51 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 86 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 277 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Woven Cable Grip? 23 Items: A Woven Cable Grip (GRIP,CABLE,WOVEN) is a braided wire device designed to clutch a bare or insulated conductor, cable or wire rope, for holding taut or drawing through conduit.
What is a Screw Thread Insert Extractor? 19 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is an Electron Tube Extractor? 18 Items: An Electron Tube Extractor (EXTRACTOR,ELECTRON TUBE) is a hand tool designed to facilitate the removal of electron tubes from electronic equipment and to avoid burning the fingers. It may be used for installing tubes.
What is a Cross Tip Screwdriver? 362 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 21 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 11 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 37 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Tool Handle Wedge? 10 Items: A Tool Handle Wedge (WEDGE,TOOL HANDLE) is excludes WEDGE, WOOD.
What is a Marlinespike? 16 Items: A Marlinespike is a metal hand tool made in the shape of a tapered pin. One end is pointed and the opposite end may be headed. The body may contain an eye for a lanyard sling, or be grooved lengthwise. Excludes CABLE PICK and FID.
What is an Aligning Punch? 272 Items: An Aligning Punch (PUNCH,ALIGNING) is a round, square, hexagonal or octagonal bodied hand tool, having a round tapered section 6-1/2 inches (165.1 mm) or more in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, DRIFT and DRIFTPIN.
What is a Drift Punch? 25 Items: A Drift Punch (PUNCH,DRIFT) is a round, square, hexagonal, or octagonal bodied hand tool, having a round tapered section 4 to 6 inches (101.6 mm to 152.4 mm) inclusive in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, ALIGNING; and DRIFTPIN.
What is a Putty Knife? 36 Items: A Putty Knife (KNIFE,PUTTY) is a hand tool with a nonedged blade fixed to a handle for laying on and smoothing putty and the like.
What is a Socket Wrench Adapter-Extension? 40 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 30 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 184 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Socket Wrench Ratchet Attachment? 47 Items: A Socket Wrench Ratchet Attachment (RATCHET ATTACHMENT,SOCKET WRENCH) is a connection for socket wrenches and handles. Consists of a ratcheting mechanism with an internal drive on one end and an external drive on the opposite end of the same size. The item is designed to permit continuous rotation of the socket in one direction without removing the socket or handle and without a complete rotation of the handle.
What is a Wrench Extension Handle? 81 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Socket Wrench Crowfoot Attachment? 155 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 33 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 43 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 48 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 2394 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 372 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 300 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 661 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 32 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand-Operated Grommet And Eyelet Press? 12 Items: A Hand-Operated Grommet And Eyelet Press (PRESS,GROMMET AND EYELET,HAND-OPERATED) is a device which punches or pierces holes and in addition fastens or sets eyelets and grommets in cloth, paper and similar material. May be used for fastening or setting rivets, lacing hooks and snaps in cloth, paper and similar material. It is hand operated by lever or screw action. See also PUNCH, EYELET, PLIER TYPE and PRESS, GROMMET AND EYELET, FOOT OPERATED.
What is a Claw Bar? 19 Items: A Claw Bar (BAR,CLAW) is before using, refer to Reference Drawing Group AG.
What is a Shock Type Wheel Stud Nut Wrench? 11 Items: A Shock Type Wheel Stud Nut Wrench (WRENCH,WHEEL STUD NUT,SHOCK TYPE) is a manually operated item designed to remove wheel stud nuts. In operation the inner nut is turned by a socket attached to a shaft on which is a loose swinging weighted handle. The weighted handle may be swung quickly to provide an impact force against the socket to loosen the seized or jammed nuts. The outer nut is held stationary by a separate hexagonal holding wrench.
What is a Drift Pin Set? 30 Items: A Drift Pin Set is a group of DRIFTPIN having different characteristics.
What is a Tire Iron? 25 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 115 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Blacksmith's Vise? 14 Items: A Blacksmith's Vise (VISE,BLACKSMITH'S) is a clamping device consisting of a mounting plate, one stationary and one manual screw actuated jaw and a supporting member extending downward from the stationary jaw to the floor. Designed to be mounted on a bench, table or the like. May include pipe holding jaws.
What is a Machinist's Vise? 64 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Clamp Base Bench Vise? 10 Items: A Clamp Base Bench Vise (VISE,BENCH,CLAMP BASE) is a clamping device consisting of a base, one stationary and one manual screw actuated jaw, and one or more guide bars or rods. Designed with an integral clamp for attaching to a bench, table, or the like. Does not include pipe holding jaws.
What is a Fixed Open End Wrench Set? 86 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Nail Set? 11 Items: A Nail Set is a round knurled, square, hexagonal or octagonal bodied hand tool having a round tapered section terminating in a cupped point. It is designed to set brad head nails below the surface by striking it a hammerlike blow. See also PUNCH, DRIVE PIN.
What is a Socket Wrench Set? 202 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is an Open End Box Wrench Set? 10 Items: An Open End Box Wrench Set (WRENCH SET,OPEN END BOX) is a group of WRENCH, OPEN END BOX having different characteristics.
What is a Combination Box And Open End Wrench Set? 72 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Box Wrench Set? 36 Items: A Box Wrench Set (WRENCH SET,BOX) is a group of box wrenches having different characteristics. It may include a HANDLE, EXTENSION WRENCH. See also WRENCH SET, COMBINATION, BOX AND OPEN END.
What is a Hot Line Stick? 26 Items: A Hot Line Stick is a hand tool consisting of a straight, round stick (pole) made of a suitable nonconductive material with a tool fixed to one end. The other end may be plain or have a butt mounting device fixed to it. Various types of attachments (hooks, rings, and bands) may be fixed to the body. It is designed for use in the repair and maintenance of live high voltage aerial lines. Excludes hot line sticks without heads.
Handle,Mattock-Pick 15 Items
What is a Wrench Kit? 73 Items: A Wrench Kit is an assortment of various types and sizes of wrenches such as SOCKET, SOCKET WRENCH; WRENCH, OPEN END, FIXED; WRENCH, BOX and the like. It may include adapter(s), ratchet(s) and the like. See also WRENCH SET (as modified.
What is a Brad Awl? 15 Items: A Brad Awl (AWL,BRAD) is a small, pointed tool used by shoemakers, saddlers, cabinetmakers, and the like for piercing small holes in wood, leather, and similar materials, and consists of a handle with a ferrule and a blade. The blade is round, terminating in a beveled, sharp straight edge and has a shank which passes through the center of the handle.
What is a Scratch Awl? 20 Items: A Scratch Awl (AWL,SCRATCH) is an item whose nominal length of blade is less than 4 inches (101.6 millimeters) and is provided with a nondetachable handle.
What is a Screw Extractor Set? 10 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 102 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
Jack,Scissors,Hand 26 Items
What is a Piston Ring Expander? 23 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
Mallet,Plastic 62 Items
Mallet,Rubber 10 Items
What is a Wood Mallet? 37 Items: A Wood Mallet (MALLET,WOOD) is excludes MALLET, CALKING; MALLET, HAWSING and MALLET, SERVING.
What is a Rack Bar Jack? 30 Items: A Rack Bar Jack (JACK,RACK BAR) is excludes JACK, BUMPER and JACK, REEL, HAND.
What is a Pneumatic Tire Valve Core Inserter And Remover? 14 Items: A Pneumatic Tire Valve Core Inserter And Remover (INSERTER AND REMOVER,PNEUMATIC TIRE VALVE CORE) is a bar of steel having a small cylindrical slotted end for removing or installing a valve core in a valve stem by a screwing motion. See also REPAIR TOOL, PNEUMATIC TIRE VALVE.
What is a Hand Tube Swaging Tool Kit? 20 Items: A Hand Tube Swaging Tool Kit (SWAGING TOOL KIT,TUBE,HAND) is a hand-operated noncutting tool consisting of one or more PUNCH, TUBE SWAGING, HAND and a tube flaring bar.
What is a Hand Tube Flaring Punch? 11 Items: A Hand Tube Flaring Punch (PUNCH,TUBE FLARING,HAND) is a noncutting tool having a shaped end or section designed to flare the ends of tubes. One type is designed to flare the ends of tubes against a tube sheet, and another to flare tube ends to mate with tube fittings. Includes punch components of FLARING TOOL, TUBE, HAND.
What is a Hose Strap Band Clamping Tool? 26 Items: A Hose Strap Band Clamping Tool (CLAMPING TOOL,STRAP BAND,HOSE) is an item designed to tension and lock metal straps around a rubber hose, and the like. It is also used to clamp and hold fittings therein.
What is a Mechanical Puller? 3073 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 470 Items
What is a Slip Joint Pliers? 84 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Brake Repair Pliers? 14 Items: A Brake Repair Pliers (PLIERS,BRAKE REPAIR) is a tool having jaws designed for use in brake repair operations, such as removing and replacing items such as keys, springs, and the like. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 226 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 12 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 81 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 56 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 15 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 11 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 29 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Cross Tip Screwdriver Set? 14 Items: A Cross Tip Screwdriver Set (SCREWDRIVER SET,CROSS TIP) is a group of SCREWDRIVER, CROSS TIP having different characteristics.
What is a Spanner Wrench Set? 18 Items: A Spanner Wrench Set (WRENCH SET,SPANNER) is a group of items under WRENCH, SPANNER having different characteristics.
What is a Drive Pin Punch Set? 31 Items: A Drive Pin Punch Set (PUNCH SET,DRIVE PIN) is a group of PUNCH, DRIVE PIN having different characteristics.
What is an Aligning Punch Set? 13 Items: An Aligning Punch Set (PUNCH SET,ALIGNING) is a group of PUNCH, ALIGNING having different characteristics. See also DRIFTPIN SET.
What is a Slugging Type Box Wrench Socket? 16 Items: A Slugging Type Box Wrench Socket (SOCKET,SLUGGING TYPE BOX WRENCH) is an item having a hexagonal external drive at one end, made to fit into the internal hexagonal or 12-point opening of a slugging type box wrench. The opposite end has a single-broached hexagonal opening of the same size as the external drive. The item is designed with extra thick walls to withstand the impact of sledge blows on the driving wrench.
What is a Mechanical Puller Step Plate? 44 Items: A Mechanical Puller Step Plate (STEP PLATE,MECHANICAL PULLER) is a circular disk, flanged to provide a shoulder, and designed to provide a base for the screw point of a PULLER, MECHANICAL when pulling externally mounted bearings, gears, and the like from hollow shafts or housings. It has a concentric, countersunk hole to accommodate the puller screw point.
What is a Solid Center Punch? 79 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Cable Type Ratchet Lever Puller? 20 Items: A Cable Type Ratchet Lever Puller (PULLER,RATCHET LEVER,CABLE TYPE) is an item consisting of a metal frame and ratchet lever reel to which is attached one end of a flexible cable (wire rope). The cable feeds through the fast eye in the metal frame, and may be reeved through a slip hook tackle hook. See also BINDER, LOAD; HOIST, WIRE ROPE and STRETCHER, WIRE.
What is an Electronic Equipment Tuning Wand? 18 Items: An Electronic Equipment Tuning Wand (TUNING WAND,ELECTRONIC EQUIPMENT) is a hand-held rod used in determining the adjustment of the windings of a radio frequency coil. It is made of insulating material with iron on one end and brass on the other end. By inserting the iron end in the coil, the inductance is increased and by inserting the brass end, the inductance is decreased.
What is a Combination Open End And Spanner Wrench? 14 Items: A Combination Open End And Spanner Wrench (WRENCH,OPEN END AND SPANNER,COMBINATION) is a tool having open end wrench characteristics at one end and spanner wrench features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s) at the other end.
What is a Detent Handling Tool? 187 Items: A Detent Handling Tool (HANDLING TOOL,DETENT) is a specially designed handling tool consisting of a rigid bar with a T-handle on one end. The other end is equipped with threads designed to mate the threads of a detent to facilitate inserting or extracting.
What is a Hand Material Handling Hook? 23 Items: A Hand Material Handling Hook (HOOK,MATERIAL HANDLING,HAND) is a hook whose curved end conforms to Style AP1, AP2, AP3 or AP4 of Reference Drawing Group AP. Excludes HOOK, MANHOLE COVER, HAND; HOOK, WIRE BREAKING, HAND; HOOK, ROCK CRUSHER FEEDING, HAND; HOOK, STRAINER REMOVING, HAND and HOOKS, BAG HANDLING, HAND.
What is a Magnetic Retrieving Tool? 11 Items: A Magnetic Retrieving Tool (RETRIEVING TOOL,MAGNETIC) is a hand-operated magnetic device used to locate and pick up metallic articles, such as bolts, nuts, pins, washers, and the like, in confined spaces. It may be rigid, flexible or adjustable. Excludes FINGER, MECHANICAL.
What is a Mechanical Puller Adapter? 78 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Combination Box And Open End Box Wrench? 13 Items: A Combination Box And Open End Box Wrench (WRENCH,BOX AND OPEN END BOX,COMBINATION) is a double end wrench, box and open end box, primarily designed for removing or replacing tube fittings. The opening in the open end box may be machined at an angle from the longitudinal center line of the wrench.
What is a Screw Thread Insert Inserter? 136 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Flat Tip Screwdriver Set? 48 Items: A Flat Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP) is a group of SCREWDRIVER, FLAT TIP having different characteristics.
What is a Terminal Crimping Tool Contact Positioner? 89 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 16 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is an Adjustable Wrench? 138 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 239 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 75 Items
Handle,Shovel 10 Items
What is a Socket Wrench Spanner Attachment? 88 Items: A Socket Wrench Spanner Attachment (SPANNER ATTACHMENT,SOCKET WRENCH) is an item having an adjustable or fixed span with pin, hook, or key type end that is used to fit and turn various size retaining rings, cover plates, plugs, couplings, and like parts. Usually designed to be driven by a male driver.
What is a Retaining Ring Installation Tool? 44 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Tacker? 16 Items: A Tacker is a hand-operated, hammerlike or gunlike item without a clincher, used to drive preformed connecting elements like pins, nails or staples through one object or piece of material into another. Excludes STAPLER (as modified).
What is a Bearing And Bushing Inserter? 290 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 207 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 939 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 14 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 93 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 161 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 94 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 141 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 53 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Six Point Tip Screwdriver? 155 Items: A Six Point Tip Screwdriver (SCREWDRIVER,SIX POINT TIP) is a manual screwdriver having a single nonremoveable blade having a tip with six rounded points.
What is a Seal Inserter And Remover? 147 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 478 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is a Preformed Packing Inserter And Remover? 34 Items: A Preformed Packing Inserter And Remover (INSERTER AND REMOVER,PREFORMED PACKING) is a hand tool designed to install and remove a PACKING, PREFORMED.
What is a Pin Remover? 34 Items: A Pin Remover (REMOVER,PIN) is a hand tool designed to facilitate the removal of a pin from a hole.
What is a Pin Inserter And Remover? 13 Items: A Pin Inserter And Remover (INSERTER AND REMOVER,PIN) is a rodlike tool designed to facilitate the insertion and removal of a pin from a hole.
What is an Electrical Contact Inserter And Remover? 37 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Piston Inserter? 40 Items: A Piston Inserter (INSERTER,PISTON) is a tool designed to permit installation of a piston or piston assembly without damaging the packings or piston.
What is a Spring Inserter And Remover? 85 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 13 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Stud Inserter? 22 Items: A Stud Inserter (INSERTER,STUD) is a device designed to drive in studs. It does not have any facilities for removing or extracting studs. See also INSERTER AND REMOVER, STUD.
What is a Stud Inserter And Remover? 17 Items: A Stud Inserter And Remover (INSERTER AND REMOVER,STUD) is a group of items designed to extract and to drive studs. It may include collets, guides, housings, holders and the like. See also REMOVER SET, STUD and INSERTER, STUD.
What is a Gear Inserter? 54 Items: A Gear Inserter (INSERTER,GEAR) is a hand tool designed to install various gears onto a gearshaft. It may be operated by a pushing or a striking force.
What is a Crimping Tool Die? 73 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is an Electrical Connector Inserter? 45 Items: An Electrical Connector Inserter (INSERTER,ELECTRICAL CONNECTOR) is a hand tool designed to hold an electrical connector, and to assist in the positioning and installation of the connector on a cover, panel or the like.
What is a Float? 12 Items: A Float is a tool used for concrete, plastering and grouting work.
What is a Mechanical Puller Set? 19 Items: A Mechanical Puller Set (PULLER SET,MECHANICAL) is two or more separate PULLER, MECHANICAL of different fixed sizes.
What is a Lifting Pneumatic Bag? 11 Items: A Lifting Pneumatic Bag (PNEUMATIC BAG,LIFTING) is a device made of flexible material designed to lift another item by being placed under the item and being inflated with air or some other gas. It will have a means of being connected to an air or gas source and may include a connector hose, a control valve and/or a pressure regulator.
What is a Cable Tie Installation Tool? 22 Items: A Cable Tie Installation Tool (INSTALLATION TOOL,CABLE TIE) is a lightweight, hand-held, hand-operated tool designed to fasten cable ties, straps and the like. Cable tie is inserted into the nose of the tool flush to the cable tie head. Trigger handle tightens cable tie and cuts off any excess. These installation tools are available in a variety of sizes depending on their intended use with miniature, intermediate, standard, heavy or extra heavy cross section ties.
What is a Bearing Staking Installation Tool? 159 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
Wrench Set,Ratchet 15 Items
What is a Sealant Dispenser? 26 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Retaining Ring Pliers Set? 10 Items: A Retaining Ring Pliers Set (PLIERS SET,RETAINING RING) is a group of PLIERS, RETAINING RING having different characteristics.
What is a Hand Armament Subsystem Carrier? 52 Items: A Hand Armament Subsystem Carrier (CARRIER,ARMAMENT SUBSYSTEM,HAND) is a metallic item with a clamp device and/or space for depositing articles. It is used for transporting weapon parts during maintanence and/or repair work, such as gun barrel, automatic loader, breechblock and the like.
What is a Ring Retaining Pliers Tip Set? 13 Items: A Ring Retaining Pliers Tip Set (TIP SET,PLIERS,RING RETAINING) is a collection of removable metallic tips in matched pairs used to provide various size capablities to PLIERS, RING RETAINING which permits the removal and installation of internal and external retaining rings.
What is a Plug Electrical Connector Extractor? 45 Items: A Plug Electrical Connector Extractor (EXTRACTOR,ELECTRICAL CONNECTOR,PLUG) is a hand tool designed to disassemble CONNECTOR, PLUG, ELECTRICAL from a CONNECTOR, RECEPTACLE, ELECTRICAL.
What is a Torque Wrench Adapter Set? 10 Items: A Torque Wrench Adapter Set (ADAPTER SET,TORQUE WRENCH) is tWO or more ADAPTER, TORQUE WRENCH of different sizes.
What is an Electronic Component Inserter And Remover? 79 Items: An Electronic Component Inserter And Remover (INSERTER AND REMOVER,ELECTRONIC COMPONENT) is an item which can insert or remove an electronic component package such as MICROCIRCUIT; RESISTOR, NETWORK (as modified); and the like from its mounting position or socket. Excludes INSERTER AND REMOVER, ELECTRICAL CONTACT; REMOVER, ELECTRICAL CONTACT; EXTRACTOR, ELECTRICAL CARD; EXTRACTOR, ELECTRONIC CRYSTAL UNIT; EXTRACTOR, ELECTRON TUBE.
What is an Impact Type Bit Set And Handle Screwdriver? 14 Items: An Impact Type Bit Set And Handle Screwdriver (SCREWDRIVER,BIT SET AND HANDLE,IMPACT TYPE) is an item consisting of a set of screwdriver bits and a impact driver to accommodate the bits of various types and characteristics. It is designed to transmit a strong rotating movement by the impact of a hammer blowed on the impact driver. It is used to loosen rusted or seized screws. Excludes SCREWDRIVER, BIT SET AND HANDLE.
What is a Hand Vise Jaw? 19 Items: A Hand Vise Jaw (JAW,VISE,HAND) is an item consisting of two opposing parts of a VISE, HAND. The item is moveable and able to open and close. It can hold, grasp or clamp work.
What is a Screwdriver Handle? 28 Items: A Screwdriver Handle (HANDLE,SCREWDRIVER) is an item used to accommodate various types of BIT, SCREWDRIVER. It is designed to rotate a bit that is used for installing or removing screws.
What is a Wire Twister Pliers? 25 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 284 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is a Mechanical Puller Body? 45 Items: A Mechanical Puller Body (BODY,PULLER,MECHANICAL) is an item designed to support and enclose the internal parts of a PULLER,MECHANICAL.
What is a Flat Tip And Cross Tip Screwdriver Set? 39 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is a Socket Wrench Screwdriver Attachment Set? 22 Items: A Socket Wrench Screwdriver Attachment Set (SCREWDRIVER ATTACHMENT SET,SOCKET WRENCH) is a set of screwdriver attachment, socket wrench of different sizes. Items consist of a female square drive on one end to attach to a handle, socket wrench and various screwdriver tip configurations on the opposite end. Excludes SCREWDRIVER ATTACHMENT,SOCKET WRENCH
What is an Oil Filter Wrench? 44 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 430 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Communications Equipment Spring Adjuster? 13 Items: A Communications Equipment Spring Adjuster (ADJUSTER,SPRING,COMMUNICATIONS EQUIPMENT) is a single or double end tool, equipped with slot(s) of various dimensions or with cylindrical rod(s), used for adjusting the springs or spring tensioned parts of electronic equipment.
What is a Rotating Members Aligning Tool? 32 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
What is a Final Drive Assembly Alignment Pin? 41 Items: A Final Drive Assembly Alignment Pin (ALIGNMENT PIN,FINAL DRIVE ASSEMBLY) is a special designed pin used in the assembling of the final drive.
Arm,Handling Tool 77 Items
What is a Splicing Sleeve Compressing Tool? 23 Items: A Splicing Sleeve Compressing Tool (COMPRESSING TOOL,SPLICING SLEEVE) is a hand tool having hinged leverage handles similar to a CUTTER, BOLT or pliers, designed to compress a splicing sleeve when joining the ends of two conductors, or when forming an eye splice in the end of a wire rope. Excludes CRIMPING TOOL, TERMINAL, HAND.
What is a Hand Screw Jack Extension? 14 Items: A Hand Screw Jack Extension (EXTENSION,HAND SCREW JACK) is a length of externally threaded rigid shafting which is the adjustable section of a JACK, SCREW, HAND.
What is a Mechanical Puller Gear Adapter? 21 Items: A Mechanical Puller Gear Adapter (GEAR ADAPTER,PULLER,MECHANICAL) is an adapter that adapts a PULLER,MECHANICAL, to pull a certain gear.
Handle,Hydraulic Jack 18 Items
What is a Female Electrical Contact Resizing Tool? 11 Items: A Female Electrical Contact Resizing Tool (RESIZING TOOL,FEMALE ELECTRICAL CONTACT) is a tool designed to shape to a specific size, female contacts such as those used on electrical connectors, tube sockets, crystal sockets, and pin jacks.
What is a Screwdriver And Socket Wrench Combination? 13 Items: A Screwdriver And Socket Wrench Combination is a hand-tool formed into an integral unit with a socket wrench at one end and a screwdriver bit at the other end. See also SCREWDRIVER AND WRENCH ASSEMBLY.
What is a Hand Hose Fitting Swaging Tool Kit? 11 Items: A Hand Hose Fitting Swaging Tool Kit (SWAGING TOOL KIT,HOSE FITTING,HAND) is a device, hydraulically actuated by hand or power operated pump, consisting of face plate, adapter plate, finger cages, fingers, ram, bushing, and expanding mandrels combined on a single base in various functional arrangements. It is used for swaging the outside diameter of hose assembly fittings, expanding the inside diameter of hose assemblies, and securing the fabrication of hose assemblies. Included are a hand or power operated pump, lubricant, cases, and trays.
What is a Catch Lever Tool? 12 Items: A Catch Lever Tool (LEVER TOOL,CATCH) is a specially designed hand tool which engages the opening and closing lever of a CATCH (as modified) for ease of operation. It is constructed of thin rigid material, usually flat, and one end has an engaging tongue.
What is a Manual Impact Wrench? 11 Items: A Manual Impact Wrench (WRENCH,IMPACT,MANUAL) is a manually operated handheld tool consisting of spring-loaded handle and a power-impact head which delivers a torsional impact from either continuous movement of the handle in one direction, or by a reciprocating action. It is used in tightening and loosening fasteners, such as bolts, nuts, and the like. The item may include sockets, extensions and offset fittings, nut runners, and the like.
What is a Drift? 63 Items: A Drift is an item consisting of a tubular body fitted with replaceable tips. It is designed to insert or remove mechanical components where space is restricted.
What is a Nutdriver? 46 Items: A Nutdriver is a non-powered hand tool with a screwdriver style handle, shaft and formed female hex or square socket at driving end.
What is a Locking Device Removal Tool? 12 Items: A Locking Device Removal Tool (REMOVAL TOOL,LOCKING DEVICE) is a hand tool designed to facilitate the removal of a WASHER, KEY and a LOCKING PLATE, NUT AND BOLT.
What is a Hydraulic Fitting Crimping Tool Head? 26 Items: A Hydraulic Fitting Crimping Tool Head (HEAD,CRIMPING TOOL,HYDRAULIC FITTING) is a component of a crimping tool used to compress fittings on fluid tubes. It consists of a U-shape item, in which, are mounted different sizes of DIE, CRIMPING TOOL for tubes of various diameters.
What is a Torque Screwdriver? 11 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.
What is a Special Purpose Combination Wrench? 13 Items: A Special Purpose Combination Wrench (WRENCH,COMBINATION,SPECIAL PURPOSE) is a tool having a combination of ends and facets. The ends may have open end, box or spanner characteristics. The sides may have features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s). Designed to fit specific items, not sized as standard or metric.
What is a Screwdriver Bit Holder? 56 Items: A Screwdriver Bit Holder (HOLDER,SCREWDRIVER BIT) is an attachment with a socket end for accepting male hexagon shank insert bits and a drive end for adapting to a portable power or hand tool.
What is a Telescoping Pole? 16 Items: A Telescoping Pole (POLE,TELESCOPING) is an item which is designed to be extended or compressed by the sliding of overlapping sections. This item may or may not be able to accommodate an extension.

Stock Items From Supply Class 5120 Page 34 of 110

5120-14-503-5956
Socket Head Screw Key

145035956
83H.8: RNCC: 3 | RNVC: 2
0124081: RNCC: 5 | RNVC: 2
3148511240816: RNCC: 5 | RNVC: 2
1131887A00: RNCC: 5 | RNVC: 2
0715 31 24: RNCC: 5 | RNVC: 2

21 Jan 1998

5120-14-454-9328
Screwdriver Handle

144549328
AMD-M: RNCC: 3 | RNVC: 2
007142: RNCC: 3 | RNVC: 2

29 Apr 1992

5120-14-317-4701
Mechanical Puller Attachment

143174701
0522230: RNCC: 3 | RNVC: 2
3148515222207: RNCC: 5 | RNVC: 2
U.27B3: RNCC: 5 | RNVC: 2
U27B3: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-405-0873
Socket Wrench Handle

144050873
S.143: RNCC: 3 | RNVC: 2
3148510567402: RNCC: 5 | RNVC: 2
S143: RNCC: 5 | RNVC: 2
0056740: RNCC: 5 | RNVC: 9
MO003359: RNCC: 6 | RNVC: 9

20 Nov 1985

5120-14-552-6165
Socket Wrench Adapter

145526165
S.231: RNCC: 3 | RNVC: 2
S.231: RNCC: 5 | RNVC: 2
3148510580401: RNCC: 5 | RNVC: 2

18 Jan 2007

5120-14-466-7447
Socket Wrench Socket

144667447
3511 191 92841: RNCC: 3 | RNVC: 2
3511-191-92841: RNCC: 5 | RNVC: 2

24 Nov 1993

5120-14-257-8049
Socket Wrench Socket

142578049
S29-32INCH: RNCC: 3 | RNVC: 9
DEMS29-32INCH: RNCC: 5 | RNVC: 9
85-638-6810: RNCC: 6 | RNVC: 9

1 Jan 1969

5120-14-323-1332
Open End Wrench

143231332
44.1'3/8X1'1/2: RNCC: 3 | RNVC: 2
3148511048313: RNCC: 5 | RNVC: 2
44-1 3-8X1 1-2: RNCC: 5 | RNVC: 2
SYB0326: RNCC: 5 | RNVC: 2
12107: RNCC: 5 | RNVC: 2
0104830: RNCC: 5 | RNVC: 9
0104831: RNCC: 5 | RNVC: 9
44 1 3/8X1 1/2CP: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-212-9160
Cle A Carre Pour Ec

142129160
9970-115-026: RNCC: 3 | RNVC: 2
9970-115-026-01: RNCC: 3 | RNVC: 2

1 Jan 1964

5120-14-264-6747
Combination Box And Open End Wrench

142646747
262-10-94172-05: RNCC: 3 | RNVC: 2
NA51-003: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-446-3124
Cheville

144463124
VTR401-2-10534: RNCC: 3 | RNVC: 2

13 Mar 1991

5120-14-249-6744
Extracteur Special

142496744
2-02509: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-321-1507
Screwdriver Bit

143211507
1007-6: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-491-7778
Cle

144917778
B00832-15: RNCC: 3 | RNVC: 2
F300 0T 004 2134: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-493-1825
Cle

144931825
HN11: RNCC: 3 | RNVC: 2
SKFHN11: RNCC: 5 | RNVC: 9
F300 0T 011 0144: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-484-4315
Mechanical Puller Adapter

144844315
888-387-800-2: RNCC: 3 | RNVC: 2

14 Nov 1996

5120-14-208-8055
Cle De Purge De Fre

142088055
2005: RNCC: 3 | RNVC: 2
499500: RNCC: 5 | RNVC: 2
DBA2005: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-557-2816
Hand Terminal Crimping Tool

145572816
985898: RNCC: 3 | RNVC: 2

29 May 2008

5120-14-323-1998

5120-14-512-2010
Socket Head Screw Key

145122010
89TX.10: RNCC: 3 | RNVC: 2
0715 33 45: RNCC: 5 | RNVC: 2

8 Feb 1999

5120-14-459-1627
Bearing Staking Installation Tool

144591627
45056304: RNCC: 3 | RNVC: 2
45056304: RNCC: 5 | RNVC: 9

19 Nov 1992

5120-14-576-0357
Spanner Wrench

145760357
112216J: RNCC: 3 | RNVC: 2
Y00013669: RNCC: 5 | RNVC: 2

24 May 2013

5120-14-413-5642

5120-14-407-4904

5120-14-256-8021
Body And Fender Spoon

142568021
M0B323: RNCC: 3 | RNVC: 2

1 Jan 1969

5120-14-433-6704
Open End Wrench

144336704
MNO2400212: RNCC: 3 | RNVC: 2
M0P2400212: RNCC: 5 | RNVC: 1

2 Aug 1989

5120-14-478-4236
Socket Head Screw Key

144784236
82H.10: RNCC: 3 | RNVC: 2
235-2937: RNCC: 5 | RNVC: 2
0715 31 45: RNCC: 5 | RNVC: 2
3148511231012: RNCC: 5 | RNVC: 2
SYQ5193: RNCC: 5 | RNVC: 2
0110686P00: RNCC: 5 | RNVC: 2
91777986: RNCC: 5 | RNVC: 2
0123101: RNCC: 5 | RNVC: 9
FACOM82H.10: RNCC: 5 | RNVC: 9

31 Oct 1995

5120-14-497-8718
Cable

144978718
F300 0T 022 9501: RNCC: 3 | RNVC: 2
45525736: RNCC: 5 | RNVC: 2

22 Oct 1997

5120-14-460-1921
Embout De Boite

144601921
PL1BV602OX890006A: RNCC: 3 | RNVC: 2

14 Jan 1993

5120-14-360-7932
Retaining Ring Pliers

143607932
196-21: RNCC: 3 | RNVC: 2
3272670262621: RNCC: 5 | RNVC: 2

19 Dec 1979

5120-14-532-5264
Flat Tip Screwdriver

145325264
MUP6204: RNCC: 3 | RNVC: 2

7 Nov 2002

5120-14-397-8660
Socket Wrench Socket

143978660
005652210P: RNCC: 3 | RNVC: 2

31 Jan 1985

5120-14-458-3106
Bearing And Bushing Remover

144583106
45215106: RNCC: 3 | RNVC: 2
45215106: RNCC: 5 | RNVC: 9

15 Oct 1992

5120-14-314-9119
Bearing And Bushing Inserter

143149119
0M458-31: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-411-6302
Bearing And Bushing Inserter

144116302
226444: RNCC: 3 | RNVC: 2

27 Aug 1986

5120-14-285-4510
Face Spanner Wrench Socket

142854510
521101: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-406-5632
Guidage Broche

144065632
853-200-503-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-506-7656
Bearing And Bushing Remover

145067656
M13010: RNCC: 3 | RNVC: 2

14 May 1998

5120-14-442-6804
Spanner Wrench

144426804
OUT8658: RNCC: 3 | RNVC: 2
0UT8658: RNCC: 5 | RNVC: 2

24 Oct 1990

5120-14-471-0441

5120-14-361-4344
Spanner Wrench

143614344
NO PRIMARY REF14-361-4344: RNCC: 3 | RNVC: 2
225255: RNCC: 5 | RNVC: 9

24 Jan 1980

5120-14-331-4231
Flat Tip Screwdriver

143314231
VTR321-2-1129: RNCC: 3 | RNVC: 2
WMN400160P1006: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-551-9047
Open End Wrench

145519047
730080S000-02A: RNCC: 3 | RNVC: 2

7 Nov 2006

5120-14-339-5483
Spanner Wrench

143395483
9970-115-569: RNCC: 3 | RNVC: 2

18 Jan 1977

5120-14-406-5600
Vis Protecteur

144065600
853-201-654-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-454-9605
Hand Terminal Crimping Tool

144549605
947261S100-00B: RNCC: 3 | RNVC: 2
947261S100-00A: RNCC: 3 | RNVC: 9
947261S100-00: RNCC: 5 | RNVC: 1

29 Apr 1992

5120-14-343-2025
Pre-Sertissage Bloc

143432025
RMPS3F10X0-8M: RNCC: 3 | RNVC: 2

16 Jun 1977

5120-14-247-1332
Jet Epaule

142471332
NO PRIMARY REF14-247-1332: RNCC: 3 | RNVC: 2
MA592: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-513-7391
Flat Tip Screwdriver

145137391
ENFD6560-1-2X8X150: RNCC: 3 | RNVC: 2

9 Apr 1999

5120-14-371-7652

5120-14-248-3511

5120-14-373-7802

5120-14-562-3831
Ratchet Wrench Set

145623831
65.JP6: RNCC: 3 | RNVC: 2
0784554: RNCC: 5 | RNVC: 2
3148517845541: RNCC: 5 | RNVC: 2

20 Oct 2009

5120-14-446-8325
Cross Tip Screwdriver

144468325
AZD.1X250: RNCC: 3 | RNVC: 2
AZD.1X250: RNCC: 5 | RNVC: 2
3148510039022: RNCC: 5 | RNVC: 2
ACD.1X250: RNCC: 5 | RNVC: 2
ACD1X250: RNCC: 5 | RNVC: 2
0003902: RNCC: 5 | RNVC: 9

17 Apr 1991

5120-14-447-1583
Blacksmith's Flatter

144471583
863A.60: RNCC: 3 | RNVC: 2
863A 60: RNCC: 5 | RNVC: 2
91710359: RNCC: 5 | RNVC: 2
3148512094104: RNCC: 5 | RNVC: 2
863A60: RNCC: 5 | RNVC: 2
0209410: RNCC: 5 | RNVC: 9

3 May 1991

5120-14-508-7295
Vise Jaw Caps

145087295
300A96995: RNCC: 3 | RNVC: 2
300A96995: RNCC: 5 | RNVC: 2

29 Sep 1998

5120-14-204-9192
Piston Ring Expander

142049192
581PL: RNCC: 3 | RNVC: 2
581PL: RNCC: 3 | RNVC: 9
MUL581PL: RNCC: 5 | RNVC: 9

1 Jan 1963

5120-14-369-7963
Socket Wrench Adapter

143697963
30AM013-0000025: RNCC: 3 | RNVC: 2

17 Apr 1981

5120-14-217-3642

5120-14-350-5338
Dip Test Pince

143505338
525243: RNCC: 3 | RNVC: 2

12 Jul 1978

5120-14-280-1408

5120-14-253-9216
Cle Manivelle Etroi

142539216
42-451: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-539-3918
Socket Head Screw Key

145393918
SP.15794: RNCC: 3 | RNVC: 2
47067688: RNCC: 5 | RNVC: 2

13 Jan 2004

5120-14-306-4356
Spanner Wrench

143064356
8811633001: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-542-7502
Screwdriver Bit

145427502
1019-8TS: RNCC: 3 | RNVC: 2
1019-8TS: RNCC: 5 | RNVC: 2

10 Aug 2004

5120-14-209-4213
Screwdriver Bit

142094213
0024052: RNCC: 3 | RNVC: 2
24120EP2: RNCC: 5 | RNVC: 2
0168430S00: RNCC: 5 | RNVC: 2
91394909: RNCC: 5 | RNVC: 2
91638820: RNCC: 5 | RNVC: 2
EP.102: RNCC: 5 | RNVC: 2
EP102: RNCC: 5 | RNVC: 2
EP2: RNCC: 5 | RNVC: 2
1222: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-401-9145
Tap And Reamer Wrench

144019145
E66130 N9: RNCC: 2 | RNVC: 2

13 Jun 1985

5120-14-269-2333
Slugging Type Box Wrench Socket

142692333
50-95: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-552-7861
Pliers

145527861
188.16G: RNCC: 3 | RNVC: 2
188.16G: RNCC: 5 | RNVC: 2
3148516739513: RNCC: 5 | RNVC: 2

31 Jan 2007

5120-14-444-6969
Spanner Wrench

144446969
600087: RNCC: 3 | RNVC: 2

16 Jan 1991

5120-14-563-0580
Socket Wrench Socket

145630580
J.18HLA: RNCC: 3 | RNVC: 2
3148510274027: RNCC: 5 | RNVC: 2
27402: RNCC: 5 | RNVC: 2

17 Dec 2009

5120-14-222-1423
Swivel Knob Jeweler's Screwdriver

142221423
4430: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-532-7294
Socket Wrench Extension

145327294
NJ.211: RNCC: 3 | RNVC: 2
3148510362106: RNCC: 5 | RNVC: 2

4 Dec 2002

5120-14-333-4292
Verrou De Crochet

143334292
0070-937: RNCC: 3 | RNVC: 2
4-0WE134358: RNCC: 5 | RNVC: 2
1163: RNCC: 5 | RNVC: 2

2 Jul 1975

5120-14-296-9005
Cle Oeil Et Ergots

142969005
260-75-10-10: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-485-7318
Preformed Packing Inserter And Remover

144857318
332A93-1172-20: RNCC: 3 | RNVC: 2

6 Feb 1997

5120-14-267-4518

5120-14-340-0493
Cle Speciale

143400493
4613035: RNCC: 3 | RNVC: 2

18 Jan 1977

5120-14-443-7972
Cle Speciale

144437972
OU27547: RNCC: 3 | RNVC: 2
0U27547: RNCC: 5 | RNVC: 2

5 Dec 1990

5120-14-432-3888
Spanner Wrench

144323888
548498: RNCC: 3 | RNVC: 2
00548498: RNCC: 5 | RNVC: 2

7 Jun 1989

5120-14-437-9666
Hand Tube Flaring Punch

144379666
P17408: RNCC: 3 | RNVC: 2
P17408: RNCC: 3 | RNVC: 9

28 Feb 1990

5120-14-429-1760
Spanner Wrench

144291760
4F06299: RNCC: 3 | RNVC: 2

11 Jan 1989

5120-14-475-5987
Socket Head Screw Key

144755987
0986611975: RNCC: 3 | RNVC: 2
9689161188: RNCC: 5 | RNVC: 2
KDEP1185: RNCC: 5 | RNVC: 2
91642888: RNCC: 5 | RNVC: 2

19 Apr 1995

5120-14-302-7883

5120-14-256-1563

5120-14-489-1009
Socket Head Screw Key

144891009
82H.7: RNCC: 3 | RNVC: 2
3148511230718: RNCC: 5 | RNVC: 2
82H7: RNCC: 5 | RNVC: 2
91778005: RNCC: 5 | RNVC: 2
235-2959: RNCC: 5 | RNVC: 2
0715 31 42: RNCC: 5 | RNVC: 2
SYQ5197: RNCC: 5 | RNVC: 2
0123071: RNCC: 5 | RNVC: 9
FACOM82H.7: RNCC: 5 | RNVC: 9

27 Jun 1997

5120-14-516-5309
Open End Wrench

145165309
20.3/4: RNCC: 3 | RNVC: 2

29 Sep 1999

5120-14-511-3871
Flat Tip Screwdriver

145113871
AZFH.6,5X150: RNCC: 3 | RNVC: 2
AZFH.6,5X150: RNCC: 5 | RNVC: 2
13437: RNCC: 5 | RNVC: 2
3148510134376: RNCC: 5 | RNVC: 2
0613 232 65: RNCC: 5 | RNVC: 2

16 Dec 1998

5120-14-552-5338
Socket Wrench Socket

145525338
K.55B: RNCC: 3 | RNVC: 2
K.55B: RNCC: 5 | RNVC: 2

12 Jan 2007

5120-14-484-6516
Socket Wrench Socket

144846516
R.9F: RNCC: 3 | RNVC: 2
1780550123: RNCC: 5 | RNVC: 2
TA5006P005: RNCC: 5 | RNVC: 2
3148510511085: RNCC: 5 | RNVC: 2
0051108: RNCC: 5 | RNVC: 9

28 Nov 1996

5120-14-303-3007
Cross Tip Screwdriver

143033007
AX.4: RNCC: 3 | RNVC: 2
3148510125800: RNCC: 5 | RNVC: 2
AX4: RNCC: 5 | RNVC: 2
91522485: RNCC: 5 | RNVC: 2
0012580: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-323-2058
Open End Wrench

143232058
10-1 3-16X1 3-8: RNCC: 3 | RNVC: 2
85-681-3761: RNCC: 6 | RNVC: 9

1 Jan 1975

5120-14-353-6479
Extracteur Injecteu

143536479
451-05-01AM2: RNCC: 3 | RNVC: 2

16 Jan 1979

5120-14-480-8621
Socket Wrench Socket

144808621
RB.9/16: RNCC: 3 | RNVC: 2
3148510533452: RNCC: 5 | RNVC: 2
RB9/16: RNCC: 5 | RNVC: 2
0053345: RNCC: 5 | RNVC: 9

4 Apr 1996

5120-14-406-6430
Ens Miroir Inspecti

144066430
851-300-408-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-237-4705
Detent Handling Tool

142374705
3130S95-66-016-1: RNCC: 3 | RNVC: 2
3130-95-66-016-1: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-576-3086
Mechanical Puller S

145763086
8811736003: RNCC: 3 | RNVC: 2

11 Jun 2013

5120-14-559-9144
Socket Wrench Set

145599144
J.451EP: RNCC: 3 | RNVC: 2
504901: RNCC: 5 | RNVC: 2
3148515049019: RNCC: 5 | RNVC: 2
AA027949: RNCC: 6 | RNVC: 9

4 Mar 2009

5120-14-214-7729
Socket Wrench Crowfoot Attachment

142147729
17-9-148: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-447-3415
Combination Box And Open End Wrench

144473415
39.12: RNCC: 3 | RNVC: 2
39-12: RNCC: 5 | RNVC: 2
91714503: RNCC: 5 | RNVC: 2
3148510998800: RNCC: 5 | RNVC: 2
0099880: RNCC: 5 | RNVC: 9

15 May 1991

5120-14-220-0245
Flat Tip Screwdriver

142200245
NO PRIMARY REF14-220-0245: RNCC: 3 | RNVC: 2
22996: RNCC: 5 | RNVC: 9
22996: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-419-3533
Socket Wrench Socket

144193533
6901D23010: RNCC: 3 | RNVC: 2
85-692-9465: RNCC: 6 | RNVC: 9

16 Oct 1987

5120-14-509-5429

5120-14-571-6169
Box Wrench

145716169
51A.60: RNCC: 3 | RNVC: 2
108261: RNCC: 5 | RNVC: 2
3148511082614: RNCC: 5 | RNVC: 2

13 Apr 2012

5120-14-266-7047

5120-14-243-3636

5120-14-447-6621

5120-14-423-2248
Poignee Pvc

144232248
0747141: RNCC: 3 | RNVC: 2
SP.1734 D-7: RNCC: 5 | RNVC: 2
SP1734D-7: RNCC: 5 | RNVC: 2

13 Apr 1988

5120-14-426-8269
Socket Head Screw Key

144268269
0419-40019: RNCC: 3 | RNVC: 2

23 Sep 1988

5120-14-438-5008
Face Spanner Wrench Socket

144385008
37AM020: RNCC: 3 | RNVC: 2

21 Mar 1990

5120-14-223-8985
Cle A Rochet Pour E

142238985
MAT196-0066F21: RNCC: 3 | RNVC: 2
GSM196-011F24: RNCC: 5 | RNVC: 2
GSM196-11F24: RNCC: 5 | RNVC: 2

1 Jan 1966

5120-14-486-5605
Embout

144865605
RT13635: RNCC: 3 | RNVC: 2

24 Mar 1997

5120-14-267-4510
Poincon Et Matrice

142674510
48819: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-558-1088
Flat Tip And Cross Tip Screwdriver Set

145581088
MOD.AZ1: RNCC: 3 | RNVC: 2
MOD.AZ1PB: RNCC: 3 | RNVC: 9
PB.MODAZ1: RNCC: 3 | RNVC: 9
0731137: RNCC: 5 | RNVC: 2
3148517311374: RNCC: 5 | RNVC: 2

2 Sep 2008

5120-14-491-3825
Cle Pla

144913825
1119: RNCC: 3 | RNVC: 2
F300 0T 002 6134: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-393-3985
Spanner Wrench

143933985
D83-54P2: RNCC: 3 | RNVC: 2

7 Apr 1984

5120-14-368-5254
Spanner Wrench

143685254
94AM024: RNCC: 3 | RNVC: 2
85-691-5154: RNCC: 6 | RNVC: 9

20 Feb 1981

5120-14-273-7450
Spanner Wrench

142737450
NO PRIMARY REF14-273-7450: RNCC: 3 | RNVC: 2
N7715206810: RNCC: 5 | RNVC: 9
C202795: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-386-3929
Manual Impact Wrench

143863929
99-250-04-006-31: RNCC: 3 | RNVC: 2
992500400631: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-514-0108
Open End Wrench

145140108
ENFD29159-15X18: RNCC: 3 | RNVC: 2

22 Apr 1999

5120-14-491-4142
Cle

144914142
628-1: RNCC: 3 | RNVC: 2
F300 0T 002 7779: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-503-3346
Screwdriver Bit Set And Handle

145033346
TOURNEVIS A LAMES MULTIPLES: RNCC: 3 | RNVC: 2
995 062 089 000: RNCC: 6 | RNVC: 9

12 Jan 1998

5120-14-228-5204

5120-14-374-3535

5120-14-291-2414
Manchon Extracteur

142912414
AH3128: RNCC: 3 | RNVC: 2
SKFAH3128: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-399-2066
Socket Head Screw Key

143992066
63.1/4: RNCC: 3 | RNVC: 2
63-1/4: RNCC: 3 | RNVC: 2
3272670244320: RNCC: 5 | RNVC: 2
63-1-4: RNCC: 5 | RNVC: 2

6 Mar 1985

5120-14-289-1465

5120-14-274-7887

5120-14-212-9165
Cle Speciale Boulon

142129165
9970-115-184: RNCC: 3 | RNVC: 2
9970-115-184-01: RNCC: 3 | RNVC: 2

1 Jan 1964

5120-14-380-6770
A Levie Serre-Joint

143806770
G25H: RNCC: 3 | RNVC: 2

29 Nov 1982

5120-14-369-4854
Emmanche Joints

143694854
851-500-455-0: RNCC: 3 | RNVC: 2

17 Apr 1981

5120-14-464-2454
Montage Poignee

144642454
854-500-358-0: RNCC: 3 | RNVC: 2

28 Jul 1993

5120-14-501-5556
Outillage De Test

145015556
T60UT0047000: RNCC: 3 | RNVC: 2

4 Nov 1997

5120-14-219-2170

5120-14-200-2822
Douille De Montage

142002822
8810243002: RNCC: 3 | RNVC: 2
800-60-311-02: RNCC: 5 | RNVC: 2
800-60-311-06: RNCC: 5 | RNVC: 2
8006031106: RNCC: 5 | RNVC: 2
881-0-243-002: RNCC: 5 | RNVC: 2

1 Jan 1962

5120-14-276-3162
Socket Wrench Socket

142763162
K1 1-16: RNCC: 3 | RNVC: 2
C-1'1/16: RNCC: 3 | RNVC: 2
C1 1-16: RNCC: 3 | RNVC: 2
K1 1-16: RNCC: 3 | RNVC: 9
3272670212732: RNCC: 5 | RNVC: 2
78C1 1-16: RNCC: 5 | RNVC: 9
DEMK1 1-16: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-283-2518

5120-14-525-4360
Wrench Kit

145254360
NJ.1000RN: RNCC: 3 | RNVC: 2

30 May 2001

5120-14-368-3809
Spanner Wrench

143683809
20256347: RNCC: 3 | RNVC: 2

20 Feb 1981

5120-14-270-9315

5120-14-567-0909
Seal Inserter

145670909
888-563-900-1: RNCC: 3 | RNVC: 2

7 Feb 2011

5120-14-406-6184
Lot Emmanche-Joints

144066184
853-201-036-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-282-0863

5120-14-273-6982

5120-14-396-1823
Cle De Culasse

143961823
5000261228: RNCC: 3 | RNVC: 2

27 Nov 1984

5120-14-333-3673
Spanner Wrench

143333673
10352U33856: RNCC: 3 | RNVC: 2
10352U33856: RNCC: 3 | RNVC: 2
PR46642: RNCC: 5 | RNVC: 2
85-688-3221: RNCC: 6 | RNVC: 9

2 Jul 1975

5120-14-278-4650
Sertisseur Special

142784650
152922: RNCC: 3 | RNVC: 2
111212: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-226-3743

5120-14-576-1386
Flat Tip Screwdriver Set

145761386
ADB.J7VE: RNCC: 3 | RNVC: 2
3148517868830: RNCC: 5 | RNVC: 2
786883: RNCC: 5 | RNVC: 2

31 May 2013

5120-14-322-7756
Open End Wrench

143227756
524-5-16X3-8: RNCC: 3 | RNVC: 9
10A5-16X3-8: RNCC: 5 | RNVC: 9
DEM524-5-16X3-8: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-404-1085
Open End Wrench

144041085
10-11X13-P: RNCC: 3 | RNVC: 2
10-11X13P: RNCC: 3 | RNVC: 2
3272670212398: RNCC: 5 | RNVC: 2
10-11X13CP: RNCC: 5 | RNVC: 9

11 Sep 1985

5120-14-261-5285
Torque Wrench Adapter

142615285
D-17: RNCC: 3 | RNVC: 2
D17: RNCC: 3 | RNVC: 2
D17: RNCC: 5 | RNVC: 2
3272670298767: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-264-9597
Spanner Wrench

142649597
0342-78: RNCC: 3 | RNVC: 2
RA342: RNCC: 5 | RNVC: 9

1 Jan 1970

5120-14-507-6126
Screwdriver Bit

145076126
ETOR.101: RNCC: 3 | RNVC: 2
ETOR101: RNCC: 5 | RNVC: 2
0025501: RNCC: 5 | RNVC: 9

29 Jul 1998

5120-14-402-1187
Open End Wrench

144021187
044U50-699132L: RNCC: 3 | RNVC: 2

26 Jun 1985

5120-14-355-1916
Spanner Wrench

143551916
VDP7531: RNCC: 3 | RNVC: 2

19 Mar 1979

5120-14-232-7185
Hand Blind Riveter

142327185
6405: RNCC: 3 | RNVC: 9

1 Jan 1967

5120-14-452-9035
Socket Head Screw Key

144529035
4135874: RNCC: 3 | RNVC: 2

27 Jan 1992

5120-14-383-4588
Electrical Card Extractor

143834588
20198537: RNCC: 3 | RNVC: 2
20198537: RNCC: 5 | RNVC: 9

11 Apr 1983

5120-14-279-8432
Defreinoir

142798432
8810007052: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-315-7500
Socket Head Screw Key

143157500
CLEMALE1-3: RNCC: 3 | RNVC: 2
BTR1-3: RNCC: 5 | RNVC: 2
85-681-3681: RNCC: 6 | RNVC: 9

1 Jan 1975

5120-14-217-2681

5120-14-301-9616
Appareil Demontage

143019616
H34UN1BPL1: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-208-7295

5120-14-373-7834
Presse Et Cintreuse

143737834
243-244J1: RNCC: 3 | RNVC: 2
3148515387555: RNCC: 5 | RNVC: 2

13 Nov 1981

5120-14-248-5501

5120-14-204-8222

5120-14-559-2229
Electrical Contact Inserter

145592229
S 059: RNCC: 3 | RNVC: 2

15 Dec 2008

5120-14-207-4914
Cle Decrou De Butee

142074914
3X2: RNCC: 3 | RNVC: 2

1 Jan 1964

5120-14-266-7000

5120-14-303-7602
Cle De Permutateur

143037602
BR361-231: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-321-1524
Open End Wrench

143211524
13 1-4X5-16: RNCC: 3 | RNVC: 2
13-1/4X5/16: RNCC: 3 | RNVC: 2
3272670337237: RNCC: 5 | RNVC: 2
85-686-0323: RNCC: 6 | RNVC: 9

1 Jan 1975

5120-14-316-9170
Mechanical Puller Adapter

143169170
U.51B5-12: RNCC: 3 | RNVC: 2
0762040: RNCC: 5 | RNVC: 2
EMB0UTU51-42: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-397-7238
Came Pince

143977238
90890-06056: RNCC: 3 | RNVC: 2

14 Dec 1984

5120-14-392-5454
Flat Tip Screwdriver

143925454
098095-2: RNCC: 3 | RNVC: 2

21 Mar 1984

5120-14-516-5310
Open End Wrench

145165310
20.3/8: RNCC: 3 | RNVC: 2

29 Sep 1999

5120-14-552-2832
Socket Wrench Socket

145522832
B.J16A2: RNCC: 3 | RNVC: 2

8 Dec 2006

5120-14-475-8873
Pliers

144758873
183.E16CPY: RNCC: 3 | RNVC: 2
183E16: RNCC: 5 | RNVC: 2
3148511419809: RNCC: 5 | RNVC: 2
18509500-6: RNCC: 5 | RNVC: 2
0141980: RNCC: 5 | RNVC: 9

10 May 1995

5120-14-299-2994
Spanner Wrench

142992994
28181-3: RNCC: 3 | RNVC: 2
28181-3: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-555-0182
Socket Wrench Socket

145550182
J.7HLA: RNCC: 3 | RNVC: 2
J.7HL: RNCC: 5 | RNVC: 2

19 Sep 2007

5120-14-264-1568
Open End Wrench

142641568
10A1 5-8: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-264-1578
Open End Wrench

142641578
10A2 7-8: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-514-6976
Socket Wrench Socket

145146976
R.9E: RNCC: 3 | RNVC: 2

9 Jun 1999

5120-14-548-5126
Socket Wrench Socket

145485126
M.58HA: RNCC: 3 | RNVC: 2
00.52.22.81: RNCC: 5 | RNVC: 2

24 Jan 2006

5120-14-405-5822
Molder's Foundry Spoon

144055822
F52280-1: RNCC: 3 | RNVC: 2

4 Dec 1985

5120-14-401-3339
Conducte Extracteur

144013339
NO PRIMARY REF14-401-3339: RNCC: 3 | RNVC: 2
199-02: RNCC: 5 | RNVC: 9

5 Jun 1985

5120-14-473-4741
Socket Wrench Socket

144734741
K.22HA: RNCC: 3 | RNVC: 2
3148510300061: RNCC: 5 | RNVC: 2
K22HA: RNCC: 5 | RNVC: 2
190208: RNCC: 5 | RNVC: 2
0715 141 22: RNCC: 5 | RNVC: 2
0030006: RNCC: 5 | RNVC: 9

31 Dec 1994

5120-14-535-2245
Turnlock Fastener Inserter And Remover

145352245
1-111: RNCC: 3 | RNVC: 2
1-111: RNCC: 5 | RNVC: 2

14 May 2003

5120-14-391-2231
Socket Head Screw Key

143912231
2-29470: RNCC: 3 | RNVC: 2

1 Mar 1984

5120-14-222-9027
Socket Wrench Handle

142229027
S-140: RNCC: 3 | RNVC: 2
S.140: RNCC: 3 | RNVC: 2
HL: RNCC: 3 | RNVC: 9
S140: RNCC: 5 | RNVC: 2
3272670238237: RNCC: 5 | RNVC: 2
S140: RNCC: 5 | RNVC: 9
75S140: RNCC: 5 | RNVC: 9
0056700: RNCC: 5 | RNVC: 9
3148510567006: RNCC: 5 | RNVC: 9

1 Jan 1966

5120-14-220-9215
Socket Wrench Handle

142209215
R-140: RNCC: 3 | RNVC: 2
3272670210202: RNCC: 5 | RNVC: 2
R140: RNCC: 5 | RNVC: 2
91369732: RNCC: 5 | RNVC: 2
73R140: RNCC: 5 | RNVC: 9
85-681-3400: RNCC: 6 | RNVC: 9

1 Jan 1965

5120-14-457-3000
Socket Head Screw Key

144573000
0126910: RNCC: 3 | RNVC: 2
89T.8: RNCC: 3 | RNVC: 2
66-P8: RNCC: 3 | RNVC: 2
66P8: RNCC: 3 | RNVC: 2
3272670233263: RNCC: 5 | RNVC: 2

25 Aug 1992

5120-14-276-3160
Socket Wrench Socket

142763160
R13: RNCC: 3 | RNVC: 2
R-13: RNCC: 3 | RNVC: 2
R13: RNCC: 3 | RNVC: 2
65P13: RNCC: 3 | RNVC: 2
M13: RNCC: 3 | RNVC: 9
3148510506302: RNCC: 5 | RNVC: 2
3272670221840: RNCC: 5 | RNVC: 2
73R13: RNCC: 5 | RNVC: 9
DEMM13: RNCC: 5 | RNVC: 9
85-673-0940: RNCC: 6 | RNVC: 9

1 Jan 1971

5120-14-444-8319
Spanner Wrench

144448319
0478-203108: RNCC: 3 | RNVC: 2

23 Jan 1991

5120-14-309-9517
Fixed Open End Wrench Set

143099517
44JN9: RNCC: 3 | RNVC: 2
44JN9T: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-266-1711
Electron Tube Extractor

142661711
3599076: RNCC: 3 | RNVC: 2
3599076: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-284-5030
Cle Speciale

142845030
24415061200: RNCC: 3 | RNVC: 2
145J612: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-241-1452
Cle A Ergots Specia

142411452
0630-78: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-249-0670
Cle A Fourche

142490670
1107: RNCC: 3 | RNVC: 2
720706: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-549-7118
Detent Handling Tool

145497118
270M533-00: RNCC: 3 | RNVC: 2

2 May 2006

5120-14-528-0666
Socket Head Screw Key

145280666
888-475-600-1: RNCC: 3 | RNVC: 2

12 Dec 2001

5120-14-385-9798
Spanner Wrench

143859798
0.411/60158: RNCC: 3 | RNVC: 2
0411-60158: RNCC: 5 | RNVC: 2

24 Aug 1983

5120-14-264-7882

5120-14-221-8795

5120-14-318-6462
Outil De Serrage

143186462
0M43656-5ABIS: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-398-2432
Positionnemen Outil

143982432
MJD448-25: RNCC: 3 | RNVC: 2

31 Jan 1985

5120-14-276-3239
Swivel Knob Jeweler's Screwdriver

142763239
NO PRIMARY REF14-276-3239: RNCC: 3 | RNVC: 2
C0PSAT1875L20SAT1875N: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-222-7402
Open End Wrench

142227402
13-1P0UCE1-16X1P0UCE5-16: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-294-9963
Spanner Wrench

142949963
NO PRIMARY REF14-294-9963: RNCC: 3 | RNVC: 2
B4C362194: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-259-0882
Outil Dalignement

142590882
154-4-002: RNCC: 3 | RNVC: 2

1 Jan 1969

5120-14-401-5665
Bearing Staking Installation Tool

144015665
355A93-3548-00: RNCC: 3 | RNVC: 2

13 Jun 1985

5120-14-439-6203
Bearing And Bushing Inserter

144396203
6801E31-9865-20: RNCC: 3 | RNVC: 2

16 May 1990

5120-14-490-6860
Drill

144906860
240 D 01030 000: RNCC: 3 | RNVC: 2
F300 0T 000 0964: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-523-5467
Hydraulic Fitting Crimping Tool Head

145235467
DLT10PSHA3006: RNCC: 3 | RNVC: 2

24 Jan 2001

5120-14-453-7447
Electrical Contact Inserter And Remover

144537447
8817800000: RNCC: 3 | RNVC: 2
89473418: RNCC: 5 | RNVC: 2

5 Mar 1992

5120-14-524-3363
Open End Wrench

145243363
8030223G00: RNCC: 3 | RNVC: 2

14 Mar 2001

5120-14-527-5913
Spanner Wrench

145275913
46AM098A: RNCC: 3 | RNVC: 2

30 Oct 2001

5120-14-395-0713
Spanner Wrench

143950713
H46698: RNCC: 3 | RNVC: 2

2 Oct 1984

5120-14-375-8046
Vise Jaw Caps

143758046
300GM91993: RNCC: 3 | RNVC: 2
91372365: RNCC: 5 | RNVC: 2
300GM91993: RNCC: 5 | RNVC: 2
300GM91993: RNCC: 5 | RNVC: 9
300GM91993: RNCC: 5 | RNVC: 9

30 Mar 1982

5120-14-216-2044
Open End Wrench

142162044
RT2732: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-254-9079
Spanner Wrench

142549079
MAS650: RNCC: 3 | RNVC: 2

1 Jan 1969

5120-14-507-5794
Hand Blind Riveter

145075794
GO980: RNCC: 3 | RNVC: 2

23 Jul 1998

5120-14-325-4830
Cone De Montage

143254830
S16-0607-0001: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-378-5134
Plaque Chauffante

143785134
6801J32-1668-00: RNCC: 3 | RNVC: 2
6801360A32-1668-00: RNCC: 5 | RNVC: 2

11 Aug 1982

5120-14-283-9723
Broche Equipee

142839723
MS682: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-379-3642
A Fourch Tournevis

143793642
004334005P: RNCC: 3 | RNVC: 2

1 Oct 1982

5120-14-237-2411
Appareil De Demonta

142372411
410565: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-364-2747
Guide Pompe Hydraul

143642747
0U119431: RNCC: 3 | RNVC: 2
0U119431: RNCC: 5 | RNVC: 9
85-691-3067: RNCC: 6 | RNVC: 9

7 Aug 1980

5120-14-575-3663
Flat Tip Screwdriver

145753663
10636513: RNCC: 3 | RNVC: 1

2 Apr 2013

5120-14-444-3206

5120-14-363-1794

5120-14-574-5657
Electrical Connector Inserter

145745657
11001100: RNCC: 3 | RNVC: 2
AA033507: RNCC: 6 | RNVC: 9

30 Jan 2013

5120-14-303-7075

5120-14-449-0092
Bearing And Bushing Inserter

144490092
NO PRIMARY REF14-449-0092: RNCC: 3 | RNVC: 2
89280899: RNCC: 5 | RNVC: 2
300C90061: RNCC: 5 | RNVC: 9

24 Jul 1991

5120-14-250-0476
Socket Head Screw Key Set

142500476
NO PRIMARY REF14-250-0476: RNCC: 3 | RNVC: 2
82.JL13: RNCC: 5 | RNVC: 2
82JL13: RNCC: 5 | RNVC: 2
91360334: RNCC: 5 | RNVC: 2
0532700: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-449-0076
Face Spanner Wrench Socket

144490076
16D6062: RNCC: 3 | RNVC: 9
91717600: RNCC: 5 | RNVC: 2
D1-16D6062: RNCC: 5 | RNVC: 9

24 Jul 1991

5120-14-343-6373
Obus De Montage

143436373
330A98-2021-21: RNCC: 3 | RNVC: 2

16 Jun 1977

5120-14-225-9656
Cle Pour Fourreaux

142259656
NO PRIMARY REF14-225-9656: RNCC: 3 | RNVC: 2
144HL279: RNCC: 5 | RNVC: 9

1 Jan 1966

5120-14-454-6653
Seal Inserter And Remover

144546653
T20-13G5-2A2: RNCC: 3 | RNVC: 2

9 Apr 1992

5120-14-379-3640
A Fourch Tournevis

143793640
004332005P: RNCC: 3 | RNVC: 2

1 Oct 1982

5120-14-225-5373

5120-14-275-7645
Spanner Wrench

142757645
A761: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-319-4518
Bearing And Bushing Inserter And Remover

143194518
3130S95-47-002: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-342-6097
Spanner Wrench

143426097
65-3FXW707864: RNCC: 3 | RNVC: 2

16 May 1977

5120-14-431-6183
Terminal Crimping Tool Contact Positioner

144316183
8572-30A: RNCC: 3 | RNVC: 2

26 Apr 1989

5120-14-384-2218

5120-14-391-6464
Open End Wrench

143916464
44-26X28CP: RNCC: 3 | RNVC: 2

21 Mar 1984

5120-14-219-2152

5120-14-381-2797
Plateau De Centrage

143812797
3072: RNCC: 3 | RNVC: 2
5000263072: RNCC: 5 | RNVC: 2
5000263072: RNCC: 5 | RNVC: 9

25 Jan 1983

5120-14-411-1259
Ecarteur De Connect

144111259
72826: RNCC: 3 | RNVC: 2

6 Aug 1986

5120-14-375-3102

5120-14-490-6951
Hammer

144906951
241 H 00310 000: RNCC: 3 | RNVC: 2
F300 0T 000 1087: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-504-8371
Socket Wrench Socket

145048371
NS.232A: RNCC: 3 | RNVC: 2
3148510433301: RNCC: 5 | RNVC: 2
NS232A: RNCC: 5 | RNVC: 2
0714 13 28: RNCC: 5 | RNVC: 2

4 Mar 1998

5120-14-314-5391
Solid Center Punch

143145391
M2D61021: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-537-4911
Face Spanner Wrench Socket

145374911
9401LOP110: RNCC: 3 | RNVC: 2

3 Nov 2003

5120-14-531-1871
Cross Tip Screwdriver

145311871
13451: RNCC: 3 | RNVC: 2
3148510134512: RNCC: 5 | RNVC: 2
AZP.2X400: RNCC: 5 | RNVC: 2

31 Jul 2002

5120-14-431-7848
Socket Head Screw Key

144317848
0453-6089908: RNCC: 3 | RNVC: 2

10 May 1989

5120-14-380-6619
Electrical Contact Inserter

143806619
001136 202 60: RNCC: 3 | RNVC: 2
W4721395A: RNCC: 5 | RNVC: 2
00113620260: RNCC: 5 | RNVC: 2

29 Nov 1982

5120-14-334-7096
Electrical Card Extractor

143347096
672DC0011: RNCC: 3 | RNVC: 2
672DC0011: RNCC: 5 | RNVC: 9

1 Jun 1976

5120-14-463-5638
Spanner Wrench

144635638
45057907: RNCC: 3 | RNVC: 2
45057907: RNCC: 5 | RNVC: 9

17 Jun 1993

5120-14-216-7482

5120-14-289-8742

5120-14-436-0196
Outil Reglage Cale

144360196
RT30581: RNCC: 3 | RNVC: 2

29 Nov 1989

5120-14-428-5287
Capteur Poussoir

144285287
MJN3462407: RNCC: 3 | RNVC: 2

8 Dec 1988

5120-14-461-6926
Support Verin

144616926
PL1DA002OR902008A: RNCC: 3 | RNVC: 2

22 Mar 1993

5120-14-565-7557
Hand Vise Jaw

145657557
885754: RNCC: 3 | RNVC: 2

21 Sep 2010

5120-14-561-2451
Combination Box And Open End Wrench

145612451
51A-12: RNCC: 3 | RNVC: 2

30 Jun 2009

5120-14-352-8370
Mechanical Puller Attachment

143528370
3160S95-63-054-1: RNCC: 3 | RNVC: 2
GPLV87-31: RNCC: 5 | RNVC: 2
85-689-8108: RNCC: 6 | RNVC: 9

14 Nov 1978

5120-14-349-2453
Socket Wrench Handle

143492453
647-20: RNCC: 3 | RNVC: 2
91726583: RNCC: 5 | RNVC: 2
6199-4: RNCC: 5 | RNVC: 2
647-200: RNCC: 5 | RNVC: 2

22 May 1978

5120-14-479-0311
Bearing And Bushing Remover

144790311
888-373-600-1: RNCC: 3 | RNVC: 2

6 Dec 1995

5120-14-426-8320
Socket Head Screw Key

144268320
0372-42-10017: RNCC: 3 | RNVC: 2

23 Sep 1988

5120-14-393-4643
Spanner Wrench

143934643
7062RUF1-1-125: RNCC: 3 | RNVC: 9

7 Apr 1984

5120-14-222-6156
Socket Wrench Socket

142226156
NO PRIMARY REF14-222-6156: RNCC: 3 | RNVC: 2
40L4-5: RNCC: 5 | RNVC: 9

1 Jan 1966

5120-14-425-6007
Casse-Ecrou

144256007
289.54: RNCC: 3 | RNVC: 2
3148511662953: RNCC: 5 | RNVC: 2
0166295: RNCC: 5 | RNVC: 9

12 Jul 1988

5120-14-551-7237
Socket Wrench Screwdriver Attachment

145517237
SV.10LB: RNCC: 3 | RNVC: 2
SV.10LB: RNCC: 5 | RNVC: 2

19 Oct 2006

5120-14-541-3758
Socket Head Screw Key

145413758
344161530: RNCC: 3 | RNVC: 2

3 Jun 2004

5120-14-421-1730
Screwdriver Bit

144211730
1019-6B60HRC: RNCC: 3 | RNVC: 2

6 Jan 1988

5120-14-222-1414
Sheet Metalworking Dolly Block

142221414
295: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-232-2216
Socket Wrench Handle

142322216
S131: RNCC: 3 | RNVC: 2
2113: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-348-3818
Socket Wrench Socket

143483818
PR46350: RNCC: 3 | RNVC: 2
85-689-7603: RNCC: 6 | RNVC: 9

29 Mar 1978

5120-14-290-5956

5120-14-438-3490
Bearing And Bushing Remover

144383490
330A98-3750-00: RNCC: 3 | RNVC: 2

14 Mar 1990

5120-14-370-6294
Detent Handling Tool

143706294
4102E11-1200-02: RNCC: 3 | RNVC: 2
4102-330-11-1200-02: RNCC: 5 | RNVC: 2
4102330A11-1200-02: RNCC: 5 | RNVC: 2

18 May 1981

5120-14-400-2094

5120-14-320-0115

5120-14-236-4025

5120-14-309-6624
Positionneur Sertis

143096624
L16-3191-11: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-362-2131
De Centrage Obus

143622131
30MS017-0000001: RNCC: 3 | RNVC: 2

20 Feb 1980

5120-14-427-2012
Serrage Douille

144272012
46AM003-01: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-329-6334
Open End Wrench

143296334
M31-059: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-437-3560
Spanner Wrench

144373560
J00650-01S140P003: RNCC: 3 | RNVC: 2

30 Jan 1990

5120-14-508-4345
Socket Head Screw Key Set

145084345
89.JP8: RNCC: 3 | RNVC: 2
1130957B00: RNCC: 5 | RNVC: 2
0126735: RNCC: 5 | RNVC: 2
220-0628: RNCC: 5 | RNVC: 2
FACOM89.JP8: RNCC: 5 | RNVC: 9

9 Sep 1998

5120-14-515-1514
Socket Wrench Screwdriver Attachment

145151514
ENFD6519D55X100: RNCC: 3 | RNVC: 2
ENFD6519-D55X100: RNCC: 3 | RNVC: 2

8 Jul 1999

5120-14-545-5041
Fixed Open End Wrench Set

145455041
RP-06000-13/20: RNCC: 3 | RNVC: 2

15 Apr 2005

5120-14-319-1922
Electrical Card Extractor

143191922
AXM033: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-511-0284
Cross Tip Screwdriver

145110284
AZD.2X100: RNCC: 3 | RNVC: 2
8038951R00: RNCC: 5 | RNVC: 2

25 Nov 1998

5120-14-501-7753
Bearing And Bushing Inserter And Remover

145017753
1X56 136 444: RNCC: 3 | RNVC: 2
1X56 136 444: RNCC: 5 | RNVC: 2

7 Nov 1997

5120-14-284-5105
Socket Head Screw Key

142845105
T0120BBC5APL5REP9: RNCC: 3 | RNVC: 2
403656TREP9: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-421-3523
Spanner Wrench

144213523
540353: RNCC: 3 | RNVC: 2

14 Jan 1988

5120-14-385-9677
Spanner Wrench

143859677
139620L: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-402-1782
Socket Wrench Socket

144021782
46AM038: RNCC: 3 | RNVC: 2

26 Jun 1985

5120-14-499-5037
Screwdriver Bit

144995037
6680321B86: RNCC: 3 | RNVC: 2
F300 0T 022 9825: RNCC: 6 | RNVC: 9

29 Oct 1997

5120-14-328-6717
Screwdriver Bit

143286717
RE6: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-506-2456
Hand Terminal Crimping Tool

145062456
946156: RNCC: 3 | RNVC: 2

15 Apr 1998

5120-14-313-7264
Face Spanner Wrench Socket

143137264
C46860: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-281-7590
Cle Speciale

142817590
A125822A: RNCC: 3 | RNVC: 2
100143: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-285-6249
Bouterolle Speciale

142856249
NO PRIMARY REF14-285-6249: RNCC: 3 | RNVC: 2
6457505: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-531-9418
Bloque-Moyeux

145319418
D.69B: RNCC: 3 | RNVC: 2
3148510195612: RNCC: 5 | RNVC: 2

27 Sep 2002

5120-14-530-6448
C Outil De Montage

145306448
4610208512: RNCC: 3 | RNVC: 2

1 Jul 2002

5120-14-422-0735
Barre A Virer

144220735
DLT152742: RNCC: 3 | RNVC: 2

22 Feb 1988

5120-14-415-9268
Socket Wrench Extension

144159268
851-601-092-0: RNCC: 3 | RNVC: 2

26 May 1987

5120-14-262-5509
Cle

142625509
0-76160: RNCC: 3 | RNVC: 2
076-160: RNCC: 5 | RNVC: 2
076160: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-570-2627
Spring Inserter And Remover

145702627
UFA31552: RNCC: 3 | RNVC: 2

5 Dec 2011

5120-14-454-9370
Retaining Ring Pliers

144549370
179627: RNCC: 3 | RNVC: 2
490A.E3: RNCC: 3 | RNVC: 2
3148511796276: RNCC: 5 | RNVC: 2

29 Apr 1992

5120-14-317-0427
Spanner Wrench

143170427
RT5165: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-545-6561
Inserted Hammer Face

145456561
212-E20: RNCC: 3 | RNVC: 2

26 Apr 2005

5120-14-463-0036
Spanner Wrench

144630036
3123621: RNCC: 3 | RNVC: 2
3123621: RNCC: 5 | RNVC: 2

12 May 1993

5120-14-214-2844

5120-14-208-8059
Mechanical Puller Step Plate

142088059
82725: RNCC: 3 | RNVC: 9

1 Jan 1964

5120-14-273-6011
Spanner Wrench

142736011
50048: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-240-3314

5120-14-416-7585
Support Socle

144167585
537432: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-283-9715

5120-14-284-2054

5120-14-201-9889
Socket Wrench Socket

142019889
R.9/16: RNCC: 3 | RNVC: 2
3148510510002: RNCC: 5 | RNVC: 2
R9-16: RNCC: 5 | RNVC: 2
0051000: RNCC: 5 | RNVC: 9
5120AA1130423: RNCC: 6 | RNVC: 9

1 Jan 1962

5120-14-225-4015
Cle Speciale Raccor

142254015
STI285-18: RNCC: 3 | RNVC: 2
20840: RNCC: 5 | RNVC: 2
285-18: RNCC: 5 | RNVC: 9

1 Jan 1966

5120-14-341-6757
Inserted Hammer Face

143416757
EB.50: RNCC: 3 | RNVC: 2
3148510222608: RNCC: 5 | RNVC: 2
EB50: RNCC: 5 | RNVC: 2
0022260: RNCC: 5 | RNVC: 9

14 Apr 1977

5120-14-545-9205
Spring Inserter And Remover

145459205
S47016: RNCC: 3 | RNVC: 2

27 May 2005

5120-14-416-7674
Open End Wrench

144167674
10-26X29CP: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-422-9248
Spanner Wrench

144229248
095067J: RNCC: 3 | RNVC: 2

24 Mar 1988

5120-14-487-0583
Socket Wrench Screwdriver Attachment

144870583
41178: RNCC: 3 | RNVC: 2
41178: RNCC: 5 | RNVC: 2

2 Apr 1997

5120-14-434-6458
Pliers

144346458
195.20CPY: RNCC: 3 | RNVC: 2
3148511452202: RNCC: 5 | RNVC: 2
91634532: RNCC: 5 | RNVC: 2
91577074: RNCC: 5 | RNVC: 2
0145220: RNCC: 5 | RNVC: 9

27 Sep 1989

5120-14-416-8102
Socket Wrench Crowfoot Attachment

144168102
0M618: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-457-9862
Seal Inserter And Remover

144579862
536974: RNCC: 3 | RNVC: 2

2 Oct 1992

5120-14-384-7418
Electrical Card Extractor

143847418
16928977: RNCC: 3 | RNVC: 2
16928977: RNCC: 5 | RNVC: 9

2 Jun 1983

5120-14-516-3147
Spanner Wrench

145163147
5655557S00: RNCC: 3 | RNVC: 2
5655557S00: RNCC: 5 | RNVC: 2

20 Sep 1999

5120-14-272-3943
Combination Box And Open End Wrench

142723943
40-31: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-374-0890
Etau Support

143740890
UFG103-22: RNCC: 3 | RNVC: 2

8 Dec 1981

5120-14-477-6253
Wrench Kit

144776253
121-994-00-W26H: RNCC: 3 | RNVC: 2
1730AA2021045: RNCC: 6 | RNVC: 9

13 Sep 1995

5120-14-558-0128
Spanner Wrench

145580128
U-EGM-LAM-091: RNCC: 3 | RNVC: 2

20 Aug 2008

5120-14-523-4236
Pistolet A Wrapper

145234236
NO PRIMARY REF14-523-4236: RNCC: 3 | RNVC: 2
6311: RNCC: 5 | RNVC: 2

19 Jan 2001

5120-14-281-1859
Spanner Wrench

142811859
4646: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-287-1813
Screw Thread Insert Inserter

142871813
01500406000: RNCC: 3 | RNVC: 2
1735A06100: RNCC: 5 | RNVC: 2
0114514B00: RNCC: 5 | RNVC: 2
32070690: RNCC: 5 | RNVC: 2
32240690: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-517-9969
Six Point Tip Screwdriver

145179969
ENFD6576-6X60: RNCC: 3 | RNVC: 2

21 Jan 2000

5120-14-382-2958
Vise Jaw Caps

143822958
NO PRIMARY REF14-382-2958: RNCC: 3 | RNVC: 2
MNR: RNCC: 5 | RNVC: 2
MNR: RNCC: 5 | RNVC: 2

17 Feb 1983

5120-14-529-8531
Detent Handling Tool

145298531
7107-1460-090: RNCC: 3 | RNVC: 2
YM1097A00: RNCC: 5 | RNVC: 2

17 Apr 2002

5120-14-571-6993
Ratchet Wrench

145716993
67.10: RNCC: 3 | RNVC: 2

24 Apr 2012

5120-14-509-4536

5120-14-241-6048
Bloc De Presertissa

142416048
RPS18K: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-410-3837
Montage Outillage

144103837
15737-511: RNCC: 3 | RNVC: 2

18 Jun 1986

5120-14-281-2950
Faux Mors Cylindre

142812950
C46810: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-442-8363
Boite Comp Extracte

144428363
U310J1: RNCC: 3 | RNVC: 2
0524174: RNCC: 5 | RNVC: 2

7 Nov 1990

5120-14-252-5509

5120-14-578-2570
Combination Box And Open End Wrench

145782570
67F.8: RNCC: 3 | RNVC: 2
3148517840874: RNCC: 5 | RNVC: 2

15 Nov 2013

5120-14-343-9666
Open End Wrench

143439666
35 3-16X3-16BSF: RNCC: 3 | RNVC: 2
35 3-16BSF: RNCC: 5 | RNVC: 2
85-686-0371: RNCC: 6 | RNVC: 9

13 Jul 1977

5120-14-552-3869
Handling Tool Arm

145523869
26056931-8: RNCC: 3 | RNVC: 2
260569318: RNCC: 5 | RNVC: 2

18 Dec 2006

5120-14-365-0192
Socket Wrench Socket

143650192
S.1'1/16H: RNCC: 3 | RNVC: 2
3148510551005: RNCC: 5 | RNVC: 2
S1 1-16H: RNCC: 5 | RNVC: 2
S1-1-16H: RNCC: 5 | RNVC: 2
0715 13 38: RNCC: 5 | RNVC: 2
0055100: RNCC: 5 | RNVC: 9

2 Sep 1980

5120-14-411-6737
Bearing And Bushing Inserter

144116737
249586: RNCC: 3 | RNVC: 2

27 Aug 1986

5120-14-544-6196
Retaining Ring Pliers

145446196
683677: RNCC: 3 | RNVC: 2
071348000036000: RNCC: 5 | RNVC: 2

14 Feb 2005

5120-14-537-4491
Socket Head Screw Key Set

145374491
87HJE8: RNCC: 3 | RNVC: 2
87H.JE8: RNCC: 5 | RNVC: 2

3 Nov 2003

5120-14-366-7426
Douille Speciale

143667426
J00750-01-5200: RNCC: 3 | RNVC: 2

20 Nov 1980

5120-14-358-5630
Pliers

143585630
438: RNCC: 3 | RNVC: 2
3148511762608: RNCC: 5 | RNVC: 2
91536418: RNCC: 5 | RNVC: 2
162-5852: RNCC: 5 | RNVC: 2
0176260: RNCC: 5 | RNVC: 9
FACOM438: RNCC: 5 | RNVC: 9

7 Sep 1979

5120-14-477-3956
Axe Batt Cle Bobine

144773956
332A93-3109-00: RNCC: 3 | RNVC: 2
F300 0T 019 9402: RNCC: 5 | RNVC: 9

23 Aug 1995

5120-14-410-0497
Spanner Wrench

144100497
851-115-021-0: RNCC: 3 | RNVC: 2

4 Jun 1986

5120-14-272-8044
Outil A Decrocher

142728044
15-647: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-306-3437
Positionneur Ecrou

143063437
330A93-3110-00: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-572-6147
Telescoping Pole

145726147
332A92-1404-01: RNCC: 3 | RNVC: 2
332A92140401: RNCC: 5 | RNVC: 2

17 Jul 2012

5120-14-368-6796
Combination Box And Open End Wrench

143686796
40.28L: RNCC: 3 | RNVC: 2
3148511011492: RNCC: 5 | RNVC: 2
40-28L: RNCC: 5 | RNVC: 2
1228M: RNCC: 5 | RNVC: 2
40.28L: RNCC: 5 | RNVC: 9
0101149: RNCC: 5 | RNVC: 9

20 Feb 1981

5120-14-426-8339
Socket Head Screw Key

144268339
0372-42-10103: RNCC: 3 | RNVC: 2

23 Sep 1988

5120-14-216-7226
Socket Wrench Socket

142167226
S.31/32: RNCC: 3 | RNVC: 2
3148510545608: RNCC: 5 | RNVC: 2
S31-32: RNCC: 5 | RNVC: 2
0054560: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-220-8388
Socket Wrench Crowfoot Attachment

142208388
9253: RNCC: 3 | RNVC: 2
17-9-46: RNCC: 5 | RNVC: 2
V2-95557-10A: RNCC: 5 | RNVC: 2

1 Jan 1965

5120-14-228-5109
Spanner Wrench

142285109
3790: RNCC: 3 | RNVC: 2
880-22-291-5: RNCC: 5 | RNVC: 2
0U3790: RNCC: 5 | RNVC: 2

1 Jan 1966

5120-14-280-1703
Socket Head Screw Key

142801703
67.1,5: RNCC: 3 | RNVC: 2
91344628: RNCC: 3 | RNVC: 2
67-1-5: RNCC: 5 | RNVC: 2
SYQ0753: RNCC: 5 | RNVC: 2
91344628: RNCC: 5 | RNVC: 2
3272670210998: RNCC: 5 | RNVC: 2
67-1,5: RNCC: 5 | RNVC: 2
91344628: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-386-5290
Extracteur Obus

143865290
330A93-3405-30: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-371-7924
Combination Box And Open End Wrench

143717924
50-5-5: RNCC: 3 | RNVC: 2
50-5,5: RNCC: 3 | RNVC: 2
500-5-5: RNCC: 3 | RNVC: 9
7471-5-5: RNCC: 5 | RNVC: 2
3272670237735: RNCC: 5 | RNVC: 2
DEM500-5-5: RNCC: 5 | RNVC: 9
85-691-5583: RNCC: 6 | RNVC: 9

5 Aug 1981

5120-14-462-9843
Rotule Extracteur

144629843
T700A3299000001: RNCC: 3 | RNVC: 2

12 May 1993

5120-14-247-4879
Extracteur De Fusib

142474879
54814: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-270-6073
Spanner Wrench

142706073
100096: RNCC: 3 | RNVC: 2
DLT036840: RNCC: 5 | RNVC: 2
DLT036840: RNCC: 5 | RNVC: 9

1 Jan 1970

5120-14-241-1453
Cle A Ergots Specia

142411453
0631-78: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-412-4654
Bearing And Bushing Inserter

144124654
F117144: RNCC: 3 | RNVC: 2

15 Oct 1986

5120-14-251-1383
Extracteur

142511383
202498: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-285-4471

5120-14-570-2240
Face Spanner Wrench Socket

145702240
95407: RNCC: 3 | RNVC: 2

30 Nov 2011

5120-14-366-0250
Boitier Gyr Support

143660250
NO PRIMARY REF14-366-0250: RNCC: 3 | RNVC: 2
42-25-04-062M1: RNCC: 5 | RNVC: 9

4 Nov 1980

5120-14-443-6331
Mandrin Couple Rotu

144436331
NO PRIMARY REF14-443-6331: RNCC: 3 | RNVC: 2
OU134940: RNCC: 5 | RNVC: 9

30 Nov 1990

5120-14-391-6474
Open End Wrench

143916474
44-1-5-16X1-3-8CP: RNCC: 3 | RNVC: 2

21 Mar 1984

5120-14-201-9935
Socket Wrench Socket

142019935
K.1'1/4A: RNCC: 3 | RNVC: 2
3148510297255: RNCC: 5 | RNVC: 2
0029725: RNCC: 5 | RNVC: 9
K1 1-4: RNCC: 5 | RNVC: 9

1 Jan 1962

5120-14-485-7339
Mechanical Puller Attachment

144857339
332A93-3681-20: RNCC: 3 | RNVC: 2

6 Feb 1997

5120-14-385-3462
Detent Handling Tool

143853462
6805J32-3004-03: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-379-0703
Bearing And Bushing Inserter

143790703
365A93-3104-20: RNCC: 3 | RNVC: 2

6 Sep 1982

5120-14-495-9835
Spring Inserter And Remover

144959835
380012: RNCC: 3 | RNVC: 2
RCS19895-10: RNCC: 5 | RNVC: 9
F300 0T 020 6795: RNCC: 6 | RNVC: 9

15 Oct 1997

5120-14-399-0974
Leve Culasse Levier

143990974
101071: RNCC: 3 | RNVC: 2
C66296: RNCC: 5 | RNVC: 2

6 Mar 1985

5120-14-247-6879

5120-14-242-3190

5120-14-535-3364
Spanner Wrench

145353364
27016919-4: RNCC: 3 | RNVC: 2
8043627T00: RNCC: 5 | RNVC: 2

22 May 2003

5120-14-349-1467
Bague De Retreint

143491467
D47719: RNCC: 3 | RNVC: 2

19 Apr 1978

5120-14-564-5716
Drill Guide

145645716
217102: RNCC: 3 | RNVC: 2

7 May 2010

5120-14-357-3035

5120-14-228-1582

5120-14-258-7765
Montage Moyeu Outil

142587765
FH137-928: RNCC: 3 | RNVC: 2

1 Jan 1969

5120-14-387-1941
De Montage Obus

143871941
MGF235-46: RNCC: 3 | RNVC: 2
MGF235-46: RNCC: 5 | RNVC: 2

24 Aug 1983

5120-14-323-4469
Pist Dem Mont Outil

143234469
M16-034: RNCC: 3 | RNVC: 2
M16-034: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-278-4824
Bouterolle Tire Riv

142784824
NO PRIMARY REF14-278-4824: RNCC: 3 | RNVC: 2
C0PS02282000: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-342-7851
Outil Arret Flector

143427851
NO PRIMARY REF14-342-7851: RNCC: 3 | RNVC: 2
RT8002: RNCC: 5 | RNVC: 9
85-800-6051: RNCC: 6 | RNVC: 9

16 May 1977

5120-14-461-8155
Carte Support

144618155
2307-129-000: RNCC: 3 | RNVC: 2
2307-129-000: RNCC: 5 | RNVC: 2

29 Mar 1993

5120-14-375-3205
Spanner Wrench

143753205
A33640Q: RNCC: 3 | RNVC: 2

26 Feb 1982

5120-14-459-3858
Bearing Staking Installation Tool

144593858
45056301: RNCC: 3 | RNVC: 2
45056301: RNCC: 5 | RNVC: 9

26 Nov 1992

5120-14-422-3810
Spanner Wrench

144223810
352354: RNCC: 3 | RNVC: 2

3 Mar 1988

5120-14-375-8010
Spanner Wrench

143758010
300A98627: RNCC: 3 | RNVC: 2
91369758: RNCC: 5 | RNVC: 2
300A98627: RNCC: 5 | RNVC: 2
300A98627: RNCC: 5 | RNVC: 9
300A98627: RNCC: 5 | RNVC: 9

30 Mar 1982

5120-14-342-5326
Screwdriver Bit

143425326
055W02-519881D: RNCC: 3 | RNVC: 2
0519881D00: RNCC: 5 | RNVC: 2

16 May 1977

5120-14-555-1160
Socket Head Screw Key

145551160
CH 0100: RNCC: 3 | RNVC: 2

2 Oct 2007

5120-14-369-9387
Socket Wrench Adapter

143699387
004340005P: RNCC: 3 | RNVC: 2

18 May 1981

5120-14-517-3815
Torque Wrench Adapter

145173815
0XB501-009-303-34: RNCC: 3 | RNVC: 2

8 Dec 1999

5120-14-416-2238
Spanner Wrench

144162238
110-430-W26H: RNCC: 3 | RNVC: 2
110-430W26H: RNCC: 5 | RNVC: 2
85-691-9418: RNCC: 6 | RNVC: 9

3 Jun 1987

5120-14-239-3085
Arracheclous

142393085
NO PRIMARY REF14-239-3085: RNCC: 3 | RNVC: 2
408: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-370-6173
Verin Fourrure

143706173
13-5205-520: RNCC: 3 | RNVC: 2

18 May 1981

5120-14-469-9050
Open End Wrench

144699050
46.11VSE: RNCC: 3 | RNVC: 2
D14-11: RNCC: 3 | RNVC: 2
3148511056103: RNCC: 5 | RNVC: 2
0105610: RNCC: 5 | RNVC: 9
MO03152: RNCC: 6 | RNVC: 9

18 May 1994

5120-14-297-5950

5120-14-379-2954
Arbre Dalignement

143792954
2-04044: RNCC: 3 | RNVC: 2

6 Sep 1982

5120-14-566-7961
Oil Filter Wrench

145667961
U.48: RNCC: 3 | RNVC: 2
3148517937338: RNCC: 5 | RNVC: 2
793733: RNCC: 5 | RNVC: 2

20 Dec 2010

5120-14-200-1402
Spanner Wrench

142001402
8810007116: RNCC: 3 | RNVC: 2
800-02-093-00: RNCC: 5 | RNVC: 2
8000209300: RNCC: 5 | RNVC: 2
881-0-007-116: RNCC: 5 | RNVC: 2

1 Jan 1962

5120-14-463-1432
Valve Prolongateur

144631432
50689: RNCC: 3 | RNVC: 2
OU50689: RNCC: 5 | RNVC: 2
85-695-0317: RNCC: 6 | RNVC: 9

26 May 1993

5120-14-483-1201
Screwdriver And Socket Wrench Combination

144831201
NO PRIMARY REF14-483-1201: RNCC: 3 | RNVC: 2
126654: RNCC: 5 | RNVC: 2
3148511266540: RNCC: 5 | RNVC: 2
88.3/8: RNCC: 5 | RNVC: 2

9 Aug 1996

5120-14-224-3083
Cle Speciale De Cha

142243083
R530-119-212: RNCC: 3 | RNVC: 2
R530-11-9-212: RNCC: 5 | RNVC: 2

1 Jan 1966

5120-14-416-0715
Pince A Sert Access

144160715
8459-132: RNCC: 3 | RNVC: 2
8459-132: RNCC: 5 | RNVC: 2

3 Jun 1987

5120-14-467-6956
Clef De Reglage

144676956
MAT853-0074F1: RNCC: 3 | RNVC: 2

26 Jan 1994

5120-14-406-5680
Demontage Outil

144065680
853-200-723-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-271-5610
Detent Handling Tool

142715610
8810003089: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-262-9682
Spanner Wrench

142629682
24-64636: RNCC: 3 | RNVC: 9

1 Jan 1970

5120-14-296-0186
Sheet Metalworking Dolly Block

142960186
317: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-412-4661
Bearing And Bushing Inserter

144124661
H117147: RNCC: 3 | RNVC: 2

15 Oct 1986

5120-14-502-4056
Outil.Demont. Verin

145024056
2PC5891/B0126: RNCC: 3 | RNVC: 2
2PC5891: RNCC: 5 | RNVC: 2

12 Dec 1997

5120-14-577-2036
Screwdriver Handle

145772036
8810176003: RNCC: 3 | RNVC: 2

22 Aug 2013

5120-14-280-2743

5120-14-414-8334
Outillage

144148334
035-42959-0: RNCC: 3 | RNVC: 9

12 Mar 1987

5120-14-508-4737
Screw Push-Pull Jack

145084737
SHE 35 1A4 COURSE 400MM: RNCC: 3 | RNVC: 2
13.1.35/50-3: RNCC: 5 | RNVC: 2

14 Sep 1998

5120-14-297-4271
Socket Wrench Socket Set

142974271
S.401A: RNCC: 3 | RNVC: 2
3148515153006: RNCC: 5 | RNVC: 2
S401E: RNCC: 5 | RNVC: 2
91463578: RNCC: 5 | RNVC: 2
S.401E: RNCC: 5 | RNVC: 2
0515300: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-241-1479
Cle A Ergots Specia

142411479
0674-78: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-576-6093
Mechanical Puller S

145766093
8817597001: RNCC: 3 | RNVC: 2

1 Jul 2013

5120-14-437-7420
Manchon De Montage

144377420
9689160397: RNCC: 3 | RNVC: 2
9689160397: RNCC: 5 | RNVC: 2
DLP756800: RNCC: 5 | RNVC: 2

14 Feb 1990

5120-14-409-8559
Cle Tuyauterie Azot

144098559
IT190: RNCC: 3 | RNVC: 2

4 Jun 1986

5120-14-217-5092

5120-14-387-2768
Cle Speciale De 46

143872768
CM136-81ST04: RNCC: 3 | RNVC: 9

15 Sep 1983

5120-14-351-7417
Outillages Ensemble

143517417
9970-121-249: RNCC: 3 | RNVC: 2

12 Sep 1978

5120-14-391-2602
Socket Head Screw Key

143912602
62-1,3: RNCC: 3 | RNVC: 2
62-1-3: RNCC: 3 | RNVC: 2
3272670244870: RNCC: 5 | RNVC: 2

1 Mar 1984

5120-14-333-8767
Mise En Pla Broches

143338767
M31-038: RNCC: 3 | RNVC: 2
M31-038: RNCC: 5 | RNVC: 9

23 Apr 1976

5120-14-532-3252
Socket Wrench Socket

145323252
SJ.7/16: RNCC: 3 | RNVC: 2

30 Oct 2002

5120-14-288-6907
Spanner Wrench

142886907
3511-180-16771: RNCC: 3 | RNVC: 2
3511 180 16771: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-541-1708
Pliers

145411708
185.20TE: RNCC: 3 | RNVC: 2
185-20TE: RNCC: 5 | RNVC: 2

14 May 2004

5120-14-427-2085
Face Spanner Wrench Socket

144272085
46AM059-00-0001: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-428-1248
Spanner Wrench

144281248
3511 190 46291: RNCC: 3 | RNVC: 2
3511-190-46291: RNCC: 5 | RNVC: 2
89288156: RNCC: 5 | RNVC: 2

1 Dec 1988

5120-14-361-8700
Pose Clap Res Outil

143618700
M31-131: RNCC: 3 | RNVC: 2
M31131: RNCC: 5 | RNVC: 2

20 Feb 1980

5120-14-326-0491
Pince Mors

143260491
8500-1779: RNCC: 3 | RNVC: 2
85-688-1216: RNCC: 6 | RNVC: 9

2 Jul 1975

5120-14-566-8216
Torque Wrench

145668216
007.162: RNCC: 3 | RNVC: 2

23 Dec 2010

5120-14-235-8780

5120-14-492-9100
Cliquet

144929100
SJ705: RNCC: 3 | RNVC: 2
F300 0T 009 2970: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-492-9005
Cliquet

144929005
CW555: RNCC: 3 | RNVC: 2
F300 0T 009 2872: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-473-7604
Open End Wrench

144737604
0768-78: RNCC: 3 | RNVC: 2
85-695-3911: RNCC: 6 | RNVC: 9

11 Jan 1995

5120-14-319-7243
Demonta Rou Mandrin

143197243
NO PRIMARY REF14-319-7243: RNCC: 3 | RNVC: 2
42-903-04-026: RNCC: 5 | RNVC: 9

21 Feb 1996

5120-14-249-4694
Extracteur Lot

142494694
L0A: RNCC: 3 | RNVC: 2
BS-L0A: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-444-7562
Disque De Pression

144447562
NO PRIMARY REF14-444-7562: RNCC: 3 | RNVC: 2
VTR251-2P-1040: RNCC: 5 | RNVC: 9

21 Jan 1991

5120-14-492-3846
Cle

144923846
5000265004: RNCC: 3 | RNVC: 2
F300 0T 007 5127: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-523-4482
Outil Pour Pose

145234482
G10ARG001: RNCC: 3 | RNVC: 2

22 Jan 2001

5120-14-249-3717

5120-14-541-1172
Flat Tip Screwdriver

145411172
0013379: RNCC: 3 | RNVC: 2
AZ.2,5X75: RNCC: 3 | RNVC: 2
AZ.2,5X75: RNCC: 5 | RNVC: 2

14 May 2004

5120-14-283-8422

5120-14-259-4744

5120-14-379-0716
Detent Handling Tool

143790716
365A93-3301-00: RNCC: 3 | RNVC: 2

6 Sep 1982

5120-14-530-5463
Mechanical Puller Attachment

145305463
U.15-01: RNCC: 3 | RNVC: 2
3148510663715: RNCC: 5 | RNVC: 2

20 Jun 2002

5120-14-386-6754
Outil A Freiner

143866754
853-125-135-0: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-574-8340
Spanner Wrench

145748340
26-803: RNCC: 3 | RNVC: 2

20 Feb 2013

5120-14-574-3980
Driftpin

145743980
261010: RNCC: 3 | RNVC: 2

16 Jan 2013

5120-14-385-3148
Open End Wrench

143853148
360A93-8700-20: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-388-5165
Pliers

143885165
NO PRIMARY REF14-388-5165: RNCC: 3 | RNVC: 2
W34: RNCC: 5 | RNVC: 2
W34: RNCC: 5 | RNVC: 9

3 Nov 1983

5120-14-363-5177
Spanner Wrench

143635177
70353249: RNCC: 3 | RNVC: 2
70353249: RNCC: 5 | RNVC: 9
85-691-1835: RNCC: 6 | RNVC: 9

9 May 1980

5120-14-380-6458
Socket Head Screw Key

143806458
NO PRIMARY REF14-380-6458: RNCC: 3 | RNVC: 2
0U134268: RNCC: 5 | RNVC: 9
85-692-2770: RNCC: 6 | RNVC: 9

29 Nov 1982

5120-14-513-4357
Socket Head Screw Key

145134357
NO PRIMARY REF14-513-4357: RNCC: 3 | RNVC: 2
NNP 5120860703341: RNCC: 5 | RNVC: 9

17 Mar 1999

5120-14-384-7507
Electrical Card Extractor

143847507
NO PRIMARY REF14-384-7507: RNCC: 3 | RNVC: 2
20030834: RNCC: 5 | RNVC: 9

2 Jun 1983

5120-14-426-2435
Outill Emmanchement

144262435
NO PRIMARY REF14-426-2435: RNCC: 3 | RNVC: 2
BL53984: RNCC: 5 | RNVC: 9

10 Aug 1988

5120-14-298-8405

5120-14-300-9171
Hand Terminal Crimping Tool

143009171
251101-1: RNCC: 3 | RNVC: 2

1 Jan 1973

Load More Results