What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.

A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Blacksmith's Punch?

A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Mechanical Finger?

A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.

A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Screwdriver And Wrench Assembly?

A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Stakeholder Bench Plate?

A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.

What is a Drill Drift?

A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.

A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Digging Bar?

A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

What is a Valve Spring Lifter?

A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.

What is a Fuse Puller?

A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.

Hand Tools, Nonedged, Nonpowered - France (FR)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by France (FR) - NCB is 14

Page 31 of 110

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by France

51	20	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - France (FR)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 16 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Pipe Vise? 19 Items: A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.
What is a Hand Vise? 25 Items: A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.
What is a Hand Hydraulic Jack? 133 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 153 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 903 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 17 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
Swage,Bottom,Blacksmith's 10 Items
What is a Hand Tube Flaring Tool? 23 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Blacksmith's Punch? 12 Items: A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.
What is a Drain Plug Wrench? 45 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 57 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 16 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 3829 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
Flatter,Blacksmith's 18 Items
Swage,Top,Blacksmith's 12 Items
What is a Pipe Wrench? 110 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 149 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 53 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
Screwdriver,Offset 54 Items
What is a Screwdriver Bit? 707 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Mechanical Finger? 25 Items: A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.
What is a Socket Wrench Socket? 1803 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 1412 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 1641 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 52 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 565 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
Jack,Push-Pull,Screw 30 Items
What is a Hand Tube Bender? 54 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 1106 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 55 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pinch Bar? 19 Items: A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.
What is a Pry Bar? 17 Items: A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.
What is a Wrecking Bar? 15 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 273 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 413 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 32 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 295 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
Face,Hammer,Inserted 25 Items
What is a Hole Sheet Metal Holder? 37 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Screwdriver And Wrench Assembly? 11 Items: A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.
What is a Hand Rivet Set? 121 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Stakeholder Bench Plate? 22 Items: A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.
What is a Drill Drift? 32 Items: A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.
What is a Tack Claw? 15 Items: A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.
Mattock 28 Items
What is a Socket Wrench Handle Bar? 108 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Stake,Sheet Metalworking 50 Items
Riveter,Blind,Hand 76 Items
What is a Hand Shovel? 43 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 98 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 30 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
What is a Digging Bar? 20 Items: A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.
Block,Dolly,Sheet Metalworking 56 Items
What is a Piston Ring Compressor? 34 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Valve Spring Lifter? 29 Items: A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.
What is a Fuse Puller? 20 Items: A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.
What is a Hand Lead Seal Press? 18 Items: A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.
What is a Hand Beading Tool? 91 Items: A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.
What is a Hand Hammer? 502 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
Head,Hand Hammer 81 Items
What is a Lamp Extractor? 76 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Tube Packing Ring Installing Tool? 29 Items: A Tube Packing Ring Installing Tool (INSTALLING TOOL,TUBE PACKING RING) is an item designed to insert packing rings on tubes within tube sheets on condensers and similar heat exchangers. In operation, the packing rings are assembled on the loading pin mandrel and are then transferred from the mandrel on to the tube by means of a tubular sleeve which slides on the mandrel.
What is a Carpenters' Pincers? 18 Items: A Carpenters' Pincers (PINCERS,CARPENTERS') is a plierlike hand tool having two opposing jaws which may have hammerlike backs. One handle has a nail or tack pulling claw, the other is shaped to form a screwdriver. The tool may contain a wire cutter. See also NIPPERS, END CUTTING and PINCERS, FARRIERS'.
What is a Trowel? 33 Items: A Trowel is a tool used for bricklaying, concrete work, plastering, linoleum laying, and masonry work. Excludes CORNER TOOL, CONCRETE.
What is a Hand Abrasive Wheel Dresser? 12 Items: A Hand Abrasive Wheel Dresser (DRESSER,ABRASIVE WHEEL,HAND) is a tool designed to remove glaze from, dress, shape, sharpen, and true solid abrasive wheels. Excludes NIB, DIAMOND, WHEEL DRESSING.
What is a Lamp Cap Extractor? 32 Items: A Lamp Cap Extractor (EXTRACTOR,LAMP CAP) is a tool specifically designed to facilitate the removal of lamp caps from switchboards, panels or indicator lamps.
What is a Rivet Bucking Bar? 51 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 86 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 277 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Woven Cable Grip? 23 Items: A Woven Cable Grip (GRIP,CABLE,WOVEN) is a braided wire device designed to clutch a bare or insulated conductor, cable or wire rope, for holding taut or drawing through conduit.
What is a Screw Thread Insert Extractor? 19 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is an Electron Tube Extractor? 18 Items: An Electron Tube Extractor (EXTRACTOR,ELECTRON TUBE) is a hand tool designed to facilitate the removal of electron tubes from electronic equipment and to avoid burning the fingers. It may be used for installing tubes.
What is a Cross Tip Screwdriver? 362 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 21 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 11 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 37 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Tool Handle Wedge? 10 Items: A Tool Handle Wedge (WEDGE,TOOL HANDLE) is excludes WEDGE, WOOD.
What is a Marlinespike? 16 Items: A Marlinespike is a metal hand tool made in the shape of a tapered pin. One end is pointed and the opposite end may be headed. The body may contain an eye for a lanyard sling, or be grooved lengthwise. Excludes CABLE PICK and FID.
What is an Aligning Punch? 272 Items: An Aligning Punch (PUNCH,ALIGNING) is a round, square, hexagonal or octagonal bodied hand tool, having a round tapered section 6-1/2 inches (165.1 mm) or more in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, DRIFT and DRIFTPIN.
What is a Drift Punch? 25 Items: A Drift Punch (PUNCH,DRIFT) is a round, square, hexagonal, or octagonal bodied hand tool, having a round tapered section 4 to 6 inches (101.6 mm to 152.4 mm) inclusive in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, ALIGNING; and DRIFTPIN.
What is a Putty Knife? 36 Items: A Putty Knife (KNIFE,PUTTY) is a hand tool with a nonedged blade fixed to a handle for laying on and smoothing putty and the like.
What is a Socket Wrench Adapter-Extension? 40 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 30 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 184 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Socket Wrench Ratchet Attachment? 47 Items: A Socket Wrench Ratchet Attachment (RATCHET ATTACHMENT,SOCKET WRENCH) is a connection for socket wrenches and handles. Consists of a ratcheting mechanism with an internal drive on one end and an external drive on the opposite end of the same size. The item is designed to permit continuous rotation of the socket in one direction without removing the socket or handle and without a complete rotation of the handle.
What is a Wrench Extension Handle? 81 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Socket Wrench Crowfoot Attachment? 155 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 33 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 43 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 48 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 2394 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 372 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 300 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 661 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 32 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand-Operated Grommet And Eyelet Press? 12 Items: A Hand-Operated Grommet And Eyelet Press (PRESS,GROMMET AND EYELET,HAND-OPERATED) is a device which punches or pierces holes and in addition fastens or sets eyelets and grommets in cloth, paper and similar material. May be used for fastening or setting rivets, lacing hooks and snaps in cloth, paper and similar material. It is hand operated by lever or screw action. See also PUNCH, EYELET, PLIER TYPE and PRESS, GROMMET AND EYELET, FOOT OPERATED.
What is a Claw Bar? 19 Items: A Claw Bar (BAR,CLAW) is before using, refer to Reference Drawing Group AG.
What is a Shock Type Wheel Stud Nut Wrench? 11 Items: A Shock Type Wheel Stud Nut Wrench (WRENCH,WHEEL STUD NUT,SHOCK TYPE) is a manually operated item designed to remove wheel stud nuts. In operation the inner nut is turned by a socket attached to a shaft on which is a loose swinging weighted handle. The weighted handle may be swung quickly to provide an impact force against the socket to loosen the seized or jammed nuts. The outer nut is held stationary by a separate hexagonal holding wrench.
What is a Drift Pin Set? 30 Items: A Drift Pin Set is a group of DRIFTPIN having different characteristics.
What is a Tire Iron? 25 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 115 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Blacksmith's Vise? 14 Items: A Blacksmith's Vise (VISE,BLACKSMITH'S) is a clamping device consisting of a mounting plate, one stationary and one manual screw actuated jaw and a supporting member extending downward from the stationary jaw to the floor. Designed to be mounted on a bench, table or the like. May include pipe holding jaws.
What is a Machinist's Vise? 64 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Clamp Base Bench Vise? 10 Items: A Clamp Base Bench Vise (VISE,BENCH,CLAMP BASE) is a clamping device consisting of a base, one stationary and one manual screw actuated jaw, and one or more guide bars or rods. Designed with an integral clamp for attaching to a bench, table, or the like. Does not include pipe holding jaws.
What is a Fixed Open End Wrench Set? 86 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Nail Set? 11 Items: A Nail Set is a round knurled, square, hexagonal or octagonal bodied hand tool having a round tapered section terminating in a cupped point. It is designed to set brad head nails below the surface by striking it a hammerlike blow. See also PUNCH, DRIVE PIN.
What is a Socket Wrench Set? 202 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is an Open End Box Wrench Set? 10 Items: An Open End Box Wrench Set (WRENCH SET,OPEN END BOX) is a group of WRENCH, OPEN END BOX having different characteristics.
What is a Combination Box And Open End Wrench Set? 72 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Box Wrench Set? 36 Items: A Box Wrench Set (WRENCH SET,BOX) is a group of box wrenches having different characteristics. It may include a HANDLE, EXTENSION WRENCH. See also WRENCH SET, COMBINATION, BOX AND OPEN END.
What is a Hot Line Stick? 26 Items: A Hot Line Stick is a hand tool consisting of a straight, round stick (pole) made of a suitable nonconductive material with a tool fixed to one end. The other end may be plain or have a butt mounting device fixed to it. Various types of attachments (hooks, rings, and bands) may be fixed to the body. It is designed for use in the repair and maintenance of live high voltage aerial lines. Excludes hot line sticks without heads.
Handle,Mattock-Pick 15 Items
What is a Wrench Kit? 73 Items: A Wrench Kit is an assortment of various types and sizes of wrenches such as SOCKET, SOCKET WRENCH; WRENCH, OPEN END, FIXED; WRENCH, BOX and the like. It may include adapter(s), ratchet(s) and the like. See also WRENCH SET (as modified.
What is a Brad Awl? 15 Items: A Brad Awl (AWL,BRAD) is a small, pointed tool used by shoemakers, saddlers, cabinetmakers, and the like for piercing small holes in wood, leather, and similar materials, and consists of a handle with a ferrule and a blade. The blade is round, terminating in a beveled, sharp straight edge and has a shank which passes through the center of the handle.
What is a Scratch Awl? 20 Items: A Scratch Awl (AWL,SCRATCH) is an item whose nominal length of blade is less than 4 inches (101.6 millimeters) and is provided with a nondetachable handle.
What is a Screw Extractor Set? 10 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 102 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
Jack,Scissors,Hand 26 Items
What is a Piston Ring Expander? 23 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
Mallet,Plastic 62 Items
Mallet,Rubber 10 Items
What is a Wood Mallet? 37 Items: A Wood Mallet (MALLET,WOOD) is excludes MALLET, CALKING; MALLET, HAWSING and MALLET, SERVING.
What is a Rack Bar Jack? 30 Items: A Rack Bar Jack (JACK,RACK BAR) is excludes JACK, BUMPER and JACK, REEL, HAND.
What is a Pneumatic Tire Valve Core Inserter And Remover? 14 Items: A Pneumatic Tire Valve Core Inserter And Remover (INSERTER AND REMOVER,PNEUMATIC TIRE VALVE CORE) is a bar of steel having a small cylindrical slotted end for removing or installing a valve core in a valve stem by a screwing motion. See also REPAIR TOOL, PNEUMATIC TIRE VALVE.
What is a Hand Tube Swaging Tool Kit? 20 Items: A Hand Tube Swaging Tool Kit (SWAGING TOOL KIT,TUBE,HAND) is a hand-operated noncutting tool consisting of one or more PUNCH, TUBE SWAGING, HAND and a tube flaring bar.
What is a Hand Tube Flaring Punch? 11 Items: A Hand Tube Flaring Punch (PUNCH,TUBE FLARING,HAND) is a noncutting tool having a shaped end or section designed to flare the ends of tubes. One type is designed to flare the ends of tubes against a tube sheet, and another to flare tube ends to mate with tube fittings. Includes punch components of FLARING TOOL, TUBE, HAND.
What is a Hose Strap Band Clamping Tool? 26 Items: A Hose Strap Band Clamping Tool (CLAMPING TOOL,STRAP BAND,HOSE) is an item designed to tension and lock metal straps around a rubber hose, and the like. It is also used to clamp and hold fittings therein.
What is a Mechanical Puller? 3073 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 470 Items
What is a Slip Joint Pliers? 84 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Brake Repair Pliers? 14 Items: A Brake Repair Pliers (PLIERS,BRAKE REPAIR) is a tool having jaws designed for use in brake repair operations, such as removing and replacing items such as keys, springs, and the like. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 226 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 12 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 81 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 56 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 15 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 11 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 29 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Cross Tip Screwdriver Set? 14 Items: A Cross Tip Screwdriver Set (SCREWDRIVER SET,CROSS TIP) is a group of SCREWDRIVER, CROSS TIP having different characteristics.
What is a Spanner Wrench Set? 18 Items: A Spanner Wrench Set (WRENCH SET,SPANNER) is a group of items under WRENCH, SPANNER having different characteristics.
What is a Drive Pin Punch Set? 31 Items: A Drive Pin Punch Set (PUNCH SET,DRIVE PIN) is a group of PUNCH, DRIVE PIN having different characteristics.
What is an Aligning Punch Set? 13 Items: An Aligning Punch Set (PUNCH SET,ALIGNING) is a group of PUNCH, ALIGNING having different characteristics. See also DRIFTPIN SET.
What is a Slugging Type Box Wrench Socket? 16 Items: A Slugging Type Box Wrench Socket (SOCKET,SLUGGING TYPE BOX WRENCH) is an item having a hexagonal external drive at one end, made to fit into the internal hexagonal or 12-point opening of a slugging type box wrench. The opposite end has a single-broached hexagonal opening of the same size as the external drive. The item is designed with extra thick walls to withstand the impact of sledge blows on the driving wrench.
What is a Mechanical Puller Step Plate? 44 Items: A Mechanical Puller Step Plate (STEP PLATE,MECHANICAL PULLER) is a circular disk, flanged to provide a shoulder, and designed to provide a base for the screw point of a PULLER, MECHANICAL when pulling externally mounted bearings, gears, and the like from hollow shafts or housings. It has a concentric, countersunk hole to accommodate the puller screw point.
What is a Solid Center Punch? 79 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Cable Type Ratchet Lever Puller? 20 Items: A Cable Type Ratchet Lever Puller (PULLER,RATCHET LEVER,CABLE TYPE) is an item consisting of a metal frame and ratchet lever reel to which is attached one end of a flexible cable (wire rope). The cable feeds through the fast eye in the metal frame, and may be reeved through a slip hook tackle hook. See also BINDER, LOAD; HOIST, WIRE ROPE and STRETCHER, WIRE.
What is an Electronic Equipment Tuning Wand? 18 Items: An Electronic Equipment Tuning Wand (TUNING WAND,ELECTRONIC EQUIPMENT) is a hand-held rod used in determining the adjustment of the windings of a radio frequency coil. It is made of insulating material with iron on one end and brass on the other end. By inserting the iron end in the coil, the inductance is increased and by inserting the brass end, the inductance is decreased.
What is a Combination Open End And Spanner Wrench? 14 Items: A Combination Open End And Spanner Wrench (WRENCH,OPEN END AND SPANNER,COMBINATION) is a tool having open end wrench characteristics at one end and spanner wrench features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s) at the other end.
What is a Detent Handling Tool? 187 Items: A Detent Handling Tool (HANDLING TOOL,DETENT) is a specially designed handling tool consisting of a rigid bar with a T-handle on one end. The other end is equipped with threads designed to mate the threads of a detent to facilitate inserting or extracting.
What is a Hand Material Handling Hook? 23 Items: A Hand Material Handling Hook (HOOK,MATERIAL HANDLING,HAND) is a hook whose curved end conforms to Style AP1, AP2, AP3 or AP4 of Reference Drawing Group AP. Excludes HOOK, MANHOLE COVER, HAND; HOOK, WIRE BREAKING, HAND; HOOK, ROCK CRUSHER FEEDING, HAND; HOOK, STRAINER REMOVING, HAND and HOOKS, BAG HANDLING, HAND.
What is a Magnetic Retrieving Tool? 11 Items: A Magnetic Retrieving Tool (RETRIEVING TOOL,MAGNETIC) is a hand-operated magnetic device used to locate and pick up metallic articles, such as bolts, nuts, pins, washers, and the like, in confined spaces. It may be rigid, flexible or adjustable. Excludes FINGER, MECHANICAL.
What is a Mechanical Puller Adapter? 78 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Combination Box And Open End Box Wrench? 13 Items: A Combination Box And Open End Box Wrench (WRENCH,BOX AND OPEN END BOX,COMBINATION) is a double end wrench, box and open end box, primarily designed for removing or replacing tube fittings. The opening in the open end box may be machined at an angle from the longitudinal center line of the wrench.
What is a Screw Thread Insert Inserter? 136 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Flat Tip Screwdriver Set? 48 Items: A Flat Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP) is a group of SCREWDRIVER, FLAT TIP having different characteristics.
What is a Terminal Crimping Tool Contact Positioner? 89 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 16 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is an Adjustable Wrench? 138 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 239 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 75 Items
Handle,Shovel 10 Items
What is a Socket Wrench Spanner Attachment? 88 Items: A Socket Wrench Spanner Attachment (SPANNER ATTACHMENT,SOCKET WRENCH) is an item having an adjustable or fixed span with pin, hook, or key type end that is used to fit and turn various size retaining rings, cover plates, plugs, couplings, and like parts. Usually designed to be driven by a male driver.
What is a Retaining Ring Installation Tool? 44 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Tacker? 16 Items: A Tacker is a hand-operated, hammerlike or gunlike item without a clincher, used to drive preformed connecting elements like pins, nails or staples through one object or piece of material into another. Excludes STAPLER (as modified).
What is a Bearing And Bushing Inserter? 290 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 207 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 939 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 14 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 93 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 161 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 94 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 141 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 53 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Six Point Tip Screwdriver? 155 Items: A Six Point Tip Screwdriver (SCREWDRIVER,SIX POINT TIP) is a manual screwdriver having a single nonremoveable blade having a tip with six rounded points.
What is a Seal Inserter And Remover? 147 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 478 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is a Preformed Packing Inserter And Remover? 34 Items: A Preformed Packing Inserter And Remover (INSERTER AND REMOVER,PREFORMED PACKING) is a hand tool designed to install and remove a PACKING, PREFORMED.
What is a Pin Remover? 34 Items: A Pin Remover (REMOVER,PIN) is a hand tool designed to facilitate the removal of a pin from a hole.
What is a Pin Inserter And Remover? 13 Items: A Pin Inserter And Remover (INSERTER AND REMOVER,PIN) is a rodlike tool designed to facilitate the insertion and removal of a pin from a hole.
What is an Electrical Contact Inserter And Remover? 37 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Piston Inserter? 40 Items: A Piston Inserter (INSERTER,PISTON) is a tool designed to permit installation of a piston or piston assembly without damaging the packings or piston.
What is a Spring Inserter And Remover? 85 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 13 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Stud Inserter? 22 Items: A Stud Inserter (INSERTER,STUD) is a device designed to drive in studs. It does not have any facilities for removing or extracting studs. See also INSERTER AND REMOVER, STUD.
What is a Stud Inserter And Remover? 17 Items: A Stud Inserter And Remover (INSERTER AND REMOVER,STUD) is a group of items designed to extract and to drive studs. It may include collets, guides, housings, holders and the like. See also REMOVER SET, STUD and INSERTER, STUD.
What is a Gear Inserter? 54 Items: A Gear Inserter (INSERTER,GEAR) is a hand tool designed to install various gears onto a gearshaft. It may be operated by a pushing or a striking force.
What is a Crimping Tool Die? 73 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is an Electrical Connector Inserter? 45 Items: An Electrical Connector Inserter (INSERTER,ELECTRICAL CONNECTOR) is a hand tool designed to hold an electrical connector, and to assist in the positioning and installation of the connector on a cover, panel or the like.
What is a Float? 12 Items: A Float is a tool used for concrete, plastering and grouting work.
What is a Mechanical Puller Set? 19 Items: A Mechanical Puller Set (PULLER SET,MECHANICAL) is two or more separate PULLER, MECHANICAL of different fixed sizes.
What is a Lifting Pneumatic Bag? 11 Items: A Lifting Pneumatic Bag (PNEUMATIC BAG,LIFTING) is a device made of flexible material designed to lift another item by being placed under the item and being inflated with air or some other gas. It will have a means of being connected to an air or gas source and may include a connector hose, a control valve and/or a pressure regulator.
What is a Cable Tie Installation Tool? 22 Items: A Cable Tie Installation Tool (INSTALLATION TOOL,CABLE TIE) is a lightweight, hand-held, hand-operated tool designed to fasten cable ties, straps and the like. Cable tie is inserted into the nose of the tool flush to the cable tie head. Trigger handle tightens cable tie and cuts off any excess. These installation tools are available in a variety of sizes depending on their intended use with miniature, intermediate, standard, heavy or extra heavy cross section ties.
What is a Bearing Staking Installation Tool? 159 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
Wrench Set,Ratchet 15 Items
What is a Sealant Dispenser? 26 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Retaining Ring Pliers Set? 10 Items: A Retaining Ring Pliers Set (PLIERS SET,RETAINING RING) is a group of PLIERS, RETAINING RING having different characteristics.
What is a Hand Armament Subsystem Carrier? 52 Items: A Hand Armament Subsystem Carrier (CARRIER,ARMAMENT SUBSYSTEM,HAND) is a metallic item with a clamp device and/or space for depositing articles. It is used for transporting weapon parts during maintanence and/or repair work, such as gun barrel, automatic loader, breechblock and the like.
What is a Ring Retaining Pliers Tip Set? 13 Items: A Ring Retaining Pliers Tip Set (TIP SET,PLIERS,RING RETAINING) is a collection of removable metallic tips in matched pairs used to provide various size capablities to PLIERS, RING RETAINING which permits the removal and installation of internal and external retaining rings.
What is a Plug Electrical Connector Extractor? 45 Items: A Plug Electrical Connector Extractor (EXTRACTOR,ELECTRICAL CONNECTOR,PLUG) is a hand tool designed to disassemble CONNECTOR, PLUG, ELECTRICAL from a CONNECTOR, RECEPTACLE, ELECTRICAL.
What is a Torque Wrench Adapter Set? 10 Items: A Torque Wrench Adapter Set (ADAPTER SET,TORQUE WRENCH) is tWO or more ADAPTER, TORQUE WRENCH of different sizes.
What is an Electronic Component Inserter And Remover? 79 Items: An Electronic Component Inserter And Remover (INSERTER AND REMOVER,ELECTRONIC COMPONENT) is an item which can insert or remove an electronic component package such as MICROCIRCUIT; RESISTOR, NETWORK (as modified); and the like from its mounting position or socket. Excludes INSERTER AND REMOVER, ELECTRICAL CONTACT; REMOVER, ELECTRICAL CONTACT; EXTRACTOR, ELECTRICAL CARD; EXTRACTOR, ELECTRONIC CRYSTAL UNIT; EXTRACTOR, ELECTRON TUBE.
What is an Impact Type Bit Set And Handle Screwdriver? 14 Items: An Impact Type Bit Set And Handle Screwdriver (SCREWDRIVER,BIT SET AND HANDLE,IMPACT TYPE) is an item consisting of a set of screwdriver bits and a impact driver to accommodate the bits of various types and characteristics. It is designed to transmit a strong rotating movement by the impact of a hammer blowed on the impact driver. It is used to loosen rusted or seized screws. Excludes SCREWDRIVER, BIT SET AND HANDLE.
What is a Hand Vise Jaw? 19 Items: A Hand Vise Jaw (JAW,VISE,HAND) is an item consisting of two opposing parts of a VISE, HAND. The item is moveable and able to open and close. It can hold, grasp or clamp work.
What is a Screwdriver Handle? 28 Items: A Screwdriver Handle (HANDLE,SCREWDRIVER) is an item used to accommodate various types of BIT, SCREWDRIVER. It is designed to rotate a bit that is used for installing or removing screws.
What is a Wire Twister Pliers? 25 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 284 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is a Mechanical Puller Body? 45 Items: A Mechanical Puller Body (BODY,PULLER,MECHANICAL) is an item designed to support and enclose the internal parts of a PULLER,MECHANICAL.
What is a Flat Tip And Cross Tip Screwdriver Set? 39 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is a Socket Wrench Screwdriver Attachment Set? 22 Items: A Socket Wrench Screwdriver Attachment Set (SCREWDRIVER ATTACHMENT SET,SOCKET WRENCH) is a set of screwdriver attachment, socket wrench of different sizes. Items consist of a female square drive on one end to attach to a handle, socket wrench and various screwdriver tip configurations on the opposite end. Excludes SCREWDRIVER ATTACHMENT,SOCKET WRENCH
What is an Oil Filter Wrench? 44 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 430 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Communications Equipment Spring Adjuster? 13 Items: A Communications Equipment Spring Adjuster (ADJUSTER,SPRING,COMMUNICATIONS EQUIPMENT) is a single or double end tool, equipped with slot(s) of various dimensions or with cylindrical rod(s), used for adjusting the springs or spring tensioned parts of electronic equipment.
What is a Rotating Members Aligning Tool? 32 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
What is a Final Drive Assembly Alignment Pin? 41 Items: A Final Drive Assembly Alignment Pin (ALIGNMENT PIN,FINAL DRIVE ASSEMBLY) is a special designed pin used in the assembling of the final drive.
Arm,Handling Tool 77 Items
What is a Splicing Sleeve Compressing Tool? 23 Items: A Splicing Sleeve Compressing Tool (COMPRESSING TOOL,SPLICING SLEEVE) is a hand tool having hinged leverage handles similar to a CUTTER, BOLT or pliers, designed to compress a splicing sleeve when joining the ends of two conductors, or when forming an eye splice in the end of a wire rope. Excludes CRIMPING TOOL, TERMINAL, HAND.
What is a Hand Screw Jack Extension? 14 Items: A Hand Screw Jack Extension (EXTENSION,HAND SCREW JACK) is a length of externally threaded rigid shafting which is the adjustable section of a JACK, SCREW, HAND.
What is a Mechanical Puller Gear Adapter? 21 Items: A Mechanical Puller Gear Adapter (GEAR ADAPTER,PULLER,MECHANICAL) is an adapter that adapts a PULLER,MECHANICAL, to pull a certain gear.
Handle,Hydraulic Jack 18 Items
What is a Female Electrical Contact Resizing Tool? 11 Items: A Female Electrical Contact Resizing Tool (RESIZING TOOL,FEMALE ELECTRICAL CONTACT) is a tool designed to shape to a specific size, female contacts such as those used on electrical connectors, tube sockets, crystal sockets, and pin jacks.
What is a Screwdriver And Socket Wrench Combination? 13 Items: A Screwdriver And Socket Wrench Combination is a hand-tool formed into an integral unit with a socket wrench at one end and a screwdriver bit at the other end. See also SCREWDRIVER AND WRENCH ASSEMBLY.
What is a Hand Hose Fitting Swaging Tool Kit? 11 Items: A Hand Hose Fitting Swaging Tool Kit (SWAGING TOOL KIT,HOSE FITTING,HAND) is a device, hydraulically actuated by hand or power operated pump, consisting of face plate, adapter plate, finger cages, fingers, ram, bushing, and expanding mandrels combined on a single base in various functional arrangements. It is used for swaging the outside diameter of hose assembly fittings, expanding the inside diameter of hose assemblies, and securing the fabrication of hose assemblies. Included are a hand or power operated pump, lubricant, cases, and trays.
What is a Catch Lever Tool? 12 Items: A Catch Lever Tool (LEVER TOOL,CATCH) is a specially designed hand tool which engages the opening and closing lever of a CATCH (as modified) for ease of operation. It is constructed of thin rigid material, usually flat, and one end has an engaging tongue.
What is a Manual Impact Wrench? 11 Items: A Manual Impact Wrench (WRENCH,IMPACT,MANUAL) is a manually operated handheld tool consisting of spring-loaded handle and a power-impact head which delivers a torsional impact from either continuous movement of the handle in one direction, or by a reciprocating action. It is used in tightening and loosening fasteners, such as bolts, nuts, and the like. The item may include sockets, extensions and offset fittings, nut runners, and the like.
What is a Drift? 63 Items: A Drift is an item consisting of a tubular body fitted with replaceable tips. It is designed to insert or remove mechanical components where space is restricted.
What is a Nutdriver? 46 Items: A Nutdriver is a non-powered hand tool with a screwdriver style handle, shaft and formed female hex or square socket at driving end.
What is a Locking Device Removal Tool? 12 Items: A Locking Device Removal Tool (REMOVAL TOOL,LOCKING DEVICE) is a hand tool designed to facilitate the removal of a WASHER, KEY and a LOCKING PLATE, NUT AND BOLT.
What is a Hydraulic Fitting Crimping Tool Head? 26 Items: A Hydraulic Fitting Crimping Tool Head (HEAD,CRIMPING TOOL,HYDRAULIC FITTING) is a component of a crimping tool used to compress fittings on fluid tubes. It consists of a U-shape item, in which, are mounted different sizes of DIE, CRIMPING TOOL for tubes of various diameters.
What is a Torque Screwdriver? 11 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.
What is a Special Purpose Combination Wrench? 13 Items: A Special Purpose Combination Wrench (WRENCH,COMBINATION,SPECIAL PURPOSE) is a tool having a combination of ends and facets. The ends may have open end, box or spanner characteristics. The sides may have features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s). Designed to fit specific items, not sized as standard or metric.
What is a Screwdriver Bit Holder? 56 Items: A Screwdriver Bit Holder (HOLDER,SCREWDRIVER BIT) is an attachment with a socket end for accepting male hexagon shank insert bits and a drive end for adapting to a portable power or hand tool.
What is a Telescoping Pole? 16 Items: A Telescoping Pole (POLE,TELESCOPING) is an item which is designed to be extended or compressed by the sliding of overlapping sections. This item may or may not be able to accommodate an extension.

Stock Items From Supply Class 5120 Page 31 of 110

5120-14-491-6914
Electrode

144916914
45-3-15: RNCC: 3 | RNVC: 2
F300 0T 003 9376: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-300-9721
Mechanical Puller Attachment

143009721
341A98-2009-24: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-506-4084
Flat Tip Screwdriver

145064084
ENFD5224IA1-2X6-5X150-6PX310: RNCC: 3 | RNVC: 2
F300 0P 000 1249: RNCC: 5 | RNVC: 2

24 Apr 1998

5120-14-332-3995
Socket Wrench Socket

143323995
9970-115-596: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-374-0868
Socket Wrench Crowfoot Attachment

143740868
UHB304-41: RNCC: 3 | RNVC: 2

8 Dec 1981

5120-14-407-3692
Electrical Contact Remover

144073692
81515-23: RNCC: 3 | RNVC: 2
85-801-0974: RNCC: 6 | RNVC: 9

12 Feb 1986

5120-14-238-1422
Spanner Wrench

142381422
951632-32: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-236-2445

5120-14-570-0626
Torque Wrench

145700626
K.325DA: RNCC: 3 | RNVC: 9

15 Nov 2011

5120-14-361-8743
Extracteur Connecte

143618743
521557: RNCC: 3 | RNVC: 2
91577404: RNCC: 5 | RNVC: 2
RX20-25GE1: RNCC: 5 | RNVC: 2
220-7225: RNCC: 5 | RNVC: 2
105-498: RNCC: 5 | RNVC: 2
RX20-25GEI: RNCC: 5 | RNVC: 2
RX20-25GE1: RNCC: 5 | RNVC: 9

20 Feb 1980

5120-14-217-9972
Cle Dynamometrique

142179972
D2-29: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-406-6407
Reglage Bague

144066407
OUT9334: RNCC: 3 | RNVC: 2
0UT9334: RNCC: 5 | RNVC: 2

8 Jan 1986

5120-14-490-8905
Lame

144908905
4067 200 002 076: RNCC: 3 | RNVC: 2
F300 0T 000 5179: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-397-7243

5120-14-395-2930

5120-14-380-8367
Spanner Wrench

143808367
C46145: RNCC: 3 | RNVC: 2

14 Dec 1982

5120-14-362-7428
Fausse Fusee Roue P

143627428
PR46563: RNCC: 3 | RNVC: 2

19 Mar 1980

5120-14-566-4259
Mechanical Puller

145664259
5000262328: RNCC: 3 | RNVC: 2

15 Nov 2010

5120-14-416-7576
Mandrin Presse

144167576
537422: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-420-1896
Bride Obturateur

144201896
37275: RNCC: 3 | RNVC: 2

24 Nov 1987

5120-14-368-2866
Entredent Jeu Contr

143682866
NO PRIMARY REF14-368-2866: RNCC: 3 | RNVC: 2
345-72234-0: RNCC: 5 | RNVC: 9

20 Feb 1981

5120-14-530-5482
Mechanical Puller Attachment

145305482
U.15-07: RNCC: 3 | RNVC: 2
3148510663777: RNCC: 5 | RNVC: 2

20 Jun 2002

5120-14-282-9199
Socket Wrench Socket

142829199
J.11H: RNCC: 3 | RNVC: 2
J11H: RNCC: 3 | RNVC: 2
3148510274300: RNCC: 5 | RNVC: 2
0713 121 111: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-339-7942
Socket Wrench Socket

143397942
NK.1'5/8: RNCC: 3 | RNVC: 2
3148510370804: RNCC: 5 | RNVC: 2
NK1 5-8: RNCC: 5 | RNVC: 2
0037080: RNCC: 5 | RNVC: 9

4 Oct 2000

5120-14-239-6910
Torque Wrench Adapter

142396910
DC2 1-2: RNCC: 3 | RNVC: 2
DC-2-1/2: RNCC: 3 | RNVC: 2
V2-95-019-03: RNCC: 5 | RNVC: 2
3272670297968: RNCC: 5 | RNVC: 2
V2-95-018-02: RNCC: 5 | RNVC: 2
0C2-1-2: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-274-8644
Cone Extenseur

142748644
R31674-7-18REP2BIS: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-334-5247
Enclume A Piquet

143345247
MR074-020: RNCC: 3 | RNVC: 9

1 Jun 1976

5120-14-566-1478
Torque Wrench

145661478
J.248-50D: RNCC: 3 | RNVC: 2
3148516934840: RNCC: 5 | RNVC: 2

21 Oct 2010

5120-14-304-6490
Tige Leve Bille

143046490
28-921-10-10: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-253-9395
Extracteur Pour Bil

142539395
NO PRIMARY REF14-253-9395: RNCC: 3 | RNVC: 2
25050: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-369-4853
Emmanche Joints

143694853
851-500-451-0: RNCC: 3 | RNVC: 2

17 Apr 1981

5120-14-393-8832
Torque Wrench Adapter

143938832
NO PRIMARY REF14-393-8832: RNCC: 3 | RNVC: 2
OU139832: RNCC: 5 | RNVC: 9

7 Mar 1996

5120-14-458-8862
Pied De Montage

144588862
M50603-02: RNCC: 3 | RNVC: 2

5 Nov 1992

5120-14-252-9639
Pliers

142529639
E77-002-12: RNCC: 2 | RNVC: 2
1508-12: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-479-2923
Face Spanner Wrench Socket

144792923
DA2C250F15-39505SPL: RNCC: 3 | RNVC: 2

8 Jan 1996

5120-14-391-8633
Torque Wrench Adapter

143918633
MHD229-43: RNCC: 3 | RNVC: 2

21 Mar 1984

5120-14-324-7878
Pliers

143247878
189-14EL: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-489-1216
Socket Wrench Socket

144891216
OCE 83-30K: RNCC: 3 | RNVC: 2
91720721: RNCC: 5 | RNVC: 2

27 Jun 1997

5120-14-348-5016
Demont Segmen Outil

143485016
8812917000: RNCC: 3 | RNVC: 2

29 Mar 1978

5120-14-568-2750
Torque Wrench

145682750
260772259: RNCC: 3 | RNVC: 2

19 May 2011

5120-14-321-2077
Enclume Pose Rivet

143212077
23521060023: RNCC: 3 | RNVC: 2
52520600: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-416-8993
Compressi Outillage

144168993
46AM102: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-296-9002

5120-14-522-4031
Cross Tip Screwdriver

145224031
0013406: RNCC: 3 | RNVC: 2
AZD.1X100: RNCC: 3 | RNVC: 2
213/186/1: RNCC: 5 | RNVC: 2
3148510134062: RNCC: 5 | RNVC: 2
AZD-1X100: RNCC: 5 | RNVC: 2
AZD1X100: RNCC: 5 | RNVC: 2
1092124E00: RNCC: 5 | RNVC: 2
013406: RNCC: 5 | RNVC: 2

26 Oct 2000

5120-14-276-3102
Socket Wrench Socket

142763102
M.2'3/4: RNCC: 3 | RNVC: 2
M2 3-4: RNCC: 3 | RNVC: 2
M-2'3/4: RNCC: 3 | RNVC: 2
3148510322209: RNCC: 5 | RNVC: 2
M2 3-4: RNCC: 5 | RNVC: 2
3272670260726: RNCC: 5 | RNVC: 2
0032220: RNCC: 5 | RNVC: 9
M2P0UCES3-4: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-266-7891
Poignee Dextraction

142667891
104276: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-573-0496
Tack Claw

145730496
7192500001: RNCC: 3 | RNVC: 2

7 Sep 2012

5120-14-567-9262
Wiring Folding Tool

145679262
260656463: RNCC: 3 | RNVC: 2

26 Apr 2011

5120-14-523-1350
Outil De Compressio

145231350
317-50107: RNCC: 3 | RNVC: 2

8 Jan 2001

5120-14-447-3440
Bearing And Bushing Inserter And Remover

144473440
60917961: RNCC: 3 | RNVC: 2
89280542: RNCC: 5 | RNVC: 2

15 May 1991

5120-14-491-9348
Cle

144919348
229557T: RNCC: 3 | RNVC: 2
F300 0T 006 1221: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-335-9078
Spanner Wrench

143359078
0410-12: RNCC: 3 | RNVC: 2

24 Jul 1976

5120-14-225-3973
Adaptateur Cle Dyna

142253973
09-12: RNCC: 3 | RNVC: 2
254420: RNCC: 5 | RNVC: 9

1 Jan 1966

5120-14-220-7930
Open End Wrench

142207930
RACC29: RNCC: 3 | RNVC: 2
RACC29: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-291-8163
Socket Wrench Socket

142918163
NK.27: RNCC: 3 | RNVC: 2
78NC27: RNCC: 3 | RNVC: 2
3148510365800: RNCC: 5 | RNVC: 2
NK 27: RNCC: 5 | RNVC: 2
NK27: RNCC: 5 | RNVC: 2
206702: RNCC: 5 | RNVC: 2
91568369: RNCC: 5 | RNVC: 2
91628997: RNCC: 5 | RNVC: 2
0714 14 05: RNCC: 5 | RNVC: 2
0036580: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-430-0860
Spanner Wrench

144300860
6814-70517: RNCC: 3 | RNVC: 2

1 Mar 1989

5120-14-254-5366
Piston Ring Compressor

142545366
510526: RNCC: 3 | RNVC: 2

1 Jan 1969

5120-14-271-6123

5120-14-485-1768
Outillage De Pliage

144851768
214582-0: RNCC: 3 | RNVC: 2

10 Jan 1997

5120-14-395-4106
Outil De Demontage

143954106
4-18623: RNCC: 3 | RNVC: 2

11 Oct 1984

5120-14-241-1477
Cle A Ergots Specia

142411477
0670-78: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-467-8753
Hand Armament Subsystem Carrier

144678753
22352464-4: RNCC: 3 | RNVC: 2

31 Jan 1994

5120-14-490-8659
Porte O

144908659
4051 160 004 154: RNCC: 3 | RNVC: 2
F300 0T 000 4896: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-529-7848
Socket Head Screw Key

145297848
83H.5/8: RNCC: 3 | RNVC: 2
3148511246412: RNCC: 5 | RNVC: 2
83.5/8: RNCC: 5 | RNVC: 2

10 Apr 2002

5120-14-357-9984
R Compression Outil

143579984
MGC231-26: RNCC: 3 | RNVC: 2
MGC231-26: RNCC: 5 | RNVC: 2

20 Jul 1979

5120-14-483-1199
Socket Wrench Socket

144831199
J.1/2LA: RNCC: 3 | RNVC: 2
3148510283111: RNCC: 5 | RNVC: 2
0028311: RNCC: 5 | RNVC: 9

9 Aug 1996

5120-14-231-6185
Spanner Wrench

142316185
NO PRIMARY REF14-231-6185: RNCC: 3 | RNVC: 2
31-60X70: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-239-9601
Griffe De Montage D

142399601
GSM297-011A125: RNCC: 3 | RNVC: 2
GSM297-11A125: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-222-1636
Poignee De Mise En

142221636
9970-115-290: RNCC: 3 | RNVC: 2
9970-115-290-00: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-311-7726
Open End Wrench

143117726
45.70: RNCC: 3 | RNVC: 2
3148511054505: RNCC: 5 | RNVC: 2
45-70: RNCC: 5 | RNVC: 2
0105450: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-459-2666
Rechanges Cliquet

144592666
J-159-15C: RNCC: 3 | RNVC: 2
J159-15C: RNCC: 3 | RNVC: 2
3272670282346: RNCC: 5 | RNVC: 2
85-694-5121: RNCC: 6 | RNVC: 9

19 Nov 1992

5120-14-321-8398
Socket Head Screw Key

143218398
8810233017: RNCC: 3 | RNVC: 2
85-595-0140: RNCC: 6 | RNVC: 9

1 Jan 1975

5120-14-438-5058
Face Spanner Wrench Socket

144385058
J47971: RNCC: 3 | RNVC: 2
85-694-0775: RNCC: 6 | RNVC: 9

21 Mar 1990

5120-14-298-9263
Mattock

142989263
NO PRIMARY REF14-298-9263: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-455-0189
Moyeu Assem Manchon

144550189
100A500879: RNCC: 3 | RNVC: 2
FH137-947: RNCC: 5 | RNVC: 2

1 May 1992

5120-14-391-5741
Spanner Wrench

143915741
OU137735: RNCC: 3 | RNVC: 2
OU137735: RNCC: 5 | RNVC: 9
85-694-3949: RNCC: 6 | RNVC: 9

21 Mar 1984

5120-14-220-8555

5120-14-400-9673
Outillage Coffret

144009673
MS1496: RNCC: 3 | RNVC: 2

21 May 1985

5120-14-406-6560
Spanner Wrench

144066560
853-200-822-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-279-0605
Spanner Wrench

142790605
116.100: RNCC: 3 | RNVC: 2
585-100: RNCC: 3 | RNVC: 9
3148511338209: RNCC: 5 | RNVC: 2
S9150: RNCC: 5 | RNVC: 2
116-100: RNCC: 5 | RNVC: 2
89221387: RNCC: 5 | RNVC: 2
DEM585-100: RNCC: 5 | RNVC: 9
0133820: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-231-9952
Cle Speciale

142319952
589788: RNCC: 3 | RNVC: 9

1 Jan 1967

5120-14-371-9717
Contre-Cle

143719717
8811747001: RNCC: 3 | RNVC: 2

5 Aug 1981

5120-14-463-2567
Outil Specifique

144632567
39566422: RNCC: 3 | RNVC: 2

4 Jun 1993

5120-14-313-7274
Faux Mors

143137274
C47017: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-493-9107
Cle

144939107
F6BLC236500AM002: RNCC: 3 | RNVC: 2
F300 0T 014 5375: RNCC: 6 | RNVC: 9

15 Oct 1997

5120-14-572-8439
Socket Wrench Socket

145728439
120007: RNCC: 3 | RNVC: 2
7612206012294: RNCC: 5 | RNVC: 2

13 Aug 2012

5120-14-428-8544
Flat Tip Screwdriver

144288544
AR.8X150: RNCC: 3 | RNVC: 2
3148510103105: RNCC: 5 | RNVC: 2
AR8X150: RNCC: 5 | RNVC: 2
CAE00903: RNCC: 5 | RNVC: 2
0010310: RNCC: 5 | RNVC: 2
91639048: RNCC: 5 | RNVC: 2

22 Dec 1988

5120-14-270-5788
Cle Speciale

142705788
397-4405: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-241-6032
Bloc De Presertissa

142416032
RMPS6M: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-483-2838
Spanner Wrench

144832838
F104070-00: RNCC: 3 | RNVC: 2
70024585: RNCC: 5 | RNVC: 2

29 Aug 1996

5120-14-421-1729
Screwdriver Bit

144211729
1019-4B60HRC: RNCC: 3 | RNVC: 2

6 Jan 1988

5120-14-243-9262

5120-14-313-3010

5120-14-433-1364
Socket Wrench Socket

144331364
K.26LA: RNCC: 3 | RNVC: 2
91628216: RNCC: 5 | RNVC: 2
3148510301457: RNCC: 5 | RNVC: 2
0030145: RNCC: 5 | RNVC: 9

11 Jul 1989

5120-14-255-6217
Cle A Fourche

142556217
M16-012: RNCC: 3 | RNVC: 2
M16-012: RNCC: 5 | RNVC: 9

1 Jan 1969

5120-14-572-3822
Mechanical Puller Adapter

145723822
9B-42988-1: RNCC: 3 | RNVC: 2
14100094090: RNCC: 5 | RNVC: 2

29 Jun 2012

5120-14-406-9429
Filetage Protecteur

144069429
853-202-174-0: RNCC: 3 | RNVC: 2

22 Jan 1986

5120-14-445-4151
Outil D'extraction

144454151
91678215: RNCC: 3 | RNVC: 9
85-694-1368: RNCC: 6 | RNVC: 9

13 Feb 1991

5120-14-395-6914
Filetee Broche

143956914
853-200-450-0: RNCC: 3 | RNVC: 2

30 Oct 1984

5120-14-489-3459
Hand Tube Swaging Tool Kit

144893459
853-600-302-0: RNCC: 3 | RNVC: 2

9 Jul 1997

5120-14-443-0169
Roulement Coupelle

144430169
30AM131-02: RNCC: 3 | RNVC: 2

7 Nov 1990

5120-14-274-8671
Cone Extenseur

142748671
R31674-14-18REP1BIS: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-406-5736
Piece Obturateur

144065736
853-200-890-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-406-6201
Joints Emmanche

144066201
853-200-846-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-562-9559
Socket Head Screw Key

145629559
7420790516: RNCC: 1 | RNVC: 2
59-30: RNCC: 3 | RNVC: 2
20790516: RNCC: 5 | RNVC: 2

8 Dec 2009

5120-14-385-3104
Spanner Wrench

143853104
360A93-3207-00: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-560-9222
Telescoping Pole

145609222
849-0-80-003: RNCC: 3 | RNVC: 2

3 Jun 2009

5120-14-248-7223
Outillage Pour Extr

142487223
NO PRIMARY REF14-248-7223: RNCC: 3 | RNVC: 2
341065: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-238-6545
Spanner Wrench

142386545
4207-2: RNCC: 3 | RNVC: 9
MLERAPACETYPE2: RNCC: 3 | RNVC: 9
SYB0301: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-549-7177
Socket Wrench Screwdriver Attachment

145497177
D.107-17: RNCC: 3 | RNVC: 2

2 May 2006

5120-14-208-6092
Electronic Equipment Alignment Tool

142086092
NO PRIMARY REF14-208-6092: RNCC: 3 | RNVC: 2
13886D: RNCC: 5 | RNVC: 9
2725-4: RNCC: 5 | RNVC: 9
2002277TRPP8A: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-311-1704
Open End Wrench

143111704
552-427MA057REP1: RNCC: 3 | RNVC: 2
536-105-004REP1: RNCC: 6 | RNVC: 9

1 Jan 1974

5120-14-304-3132
Cone Mise En Forme

143043132
S16-0605-0571: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-559-8843
Retaining Ring Pliers

145598843
177E.19: RNCC: 3 | RNVC: 2
3148511408346: RNCC: 5 | RNVC: 2

2 Mar 2009

5120-14-541-6442
Cle Multiplicatrice

145416442
98250000125: RNCC: 3 | RNVC: 2

17 Jun 2004

5120-14-284-1961
Casse-Ecrou

142841961
289: RNCC: 3 | RNVC: 2
3148515404504: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-248-3523

5120-14-248-3528

5120-14-248-3522

5120-14-490-8954
Outil

144908954
4067 440 000 568: RNCC: 3 | RNVC: 2
F300 0T 000 5235: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-490-8691
Niveau

144908691
4061 112 220 060: RNCC: 3 | RNVC: 2
F300 0T 000 4930: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-425-9266
Mandrin Emmanchemen

144259266
600140: RNCC: 3 | RNVC: 2

28 Jul 1988

5120-14-232-8843
Chasse Axe Special

142328843
594096: RNCC: 3 | RNVC: 9

1 Jan 1967

5120-14-231-9960
Demonte Soupape

142319960
DAZ: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-397-2290

5120-14-216-3141
Cle Pour Demontage

142163141
8810179000: RNCC: 3 | RNVC: 2
881-0-179-000: RNCC: 5 | RNVC: 2

1 Jan 1965

5120-14-201-3063
Flat Tip Screwdriver

142013063
A214-125: RNCC: 3 | RNVC: 2
0613 240 7: RNCC: 5 | RNVC: 2
0393155034: RNCC: 5 | RNVC: 2
393155034: RNCC: 5 | RNVC: 9
0393155034: RNCC: 5 | RNVC: 9

1 Jan 1962

5120-14-237-5437
Cle Speciale

142375437
M15-005: RNCC: 3 | RNVC: 2
M15-005: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-388-0171
Spanner Wrench

143880171
050-120-70-01: RNCC: 3 | RNVC: 2
A050-120-70-01: RNCC: 3 | RNVC: 2

12 Oct 1983

5120-14-466-3763
Spanner Wrench

144663763
M47590-100: RNCC: 3 | RNVC: 2

3 Nov 1993

5120-14-356-3436
Electrical Contact Inserter

143563436
8500-93A: RNCC: 3 | RNVC: 2
91364543: RNCC: 3 | RNVC: 9
85-800-7917: RNCC: 6 | RNVC: 9

25 Apr 1979

5120-14-421-6357
Socket Wrench Spanner Attachment

144216357
0372-42-10145: RNCC: 3 | RNVC: 2

20 Jan 1988

5120-14-041-9781
Spanner Wrench

140419781
NO PRIMARY REF14-041-9781: RNCC: 3 | RNVC: 2
229585: RNCC: 5 | RNVC: 9

24 Jul 1976

5120-14-300-9623
Spanner Wrench

143009623
341A93-3222-00: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-284-9920
Retaining Ring Pliers

142849920
NO PRIMARY REF14-284-9920: RNCC: 3 | RNVC: 2
0146010: RNCC: 5 | RNVC: 2
199-13: RNCC: 5 | RNVC: 2
199.13: RNCC: 5 | RNVC: 2
91453604: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-249-3947
Compresseur Filtre

142493947
3210-96-75-010: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-387-1937
Mise En Place Outil

143871937
MGD235-49: RNCC: 3 | RNVC: 2
MGD235-49: RNCC: 5 | RNVC: 2

24 Aug 1983

5120-14-243-0865
Cle Anneau Dattelag

142430865
NO PRIMARY REF14-243-0865: RNCC: 3 | RNVC: 2
24438: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-548-6567
Socket Wrench Socket

145486567
S.23HLA: RNCC: 3 | RNVC: 2
00.49.42.92: RNCC: 5 | RNVC: 2

30 Jan 2006

5120-14-550-2229
Mechanical Puller Attachment

145502229
RPWM54-8: RNCC: 3 | RNVC: 2

12 Jun 2006

5120-14-239-5200

5120-14-309-7430
Bearing And Bushing Inserter

143097430
341A93-3508-00: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-272-3758
Open End Wrench

142723758
E74302R54-58BAW: RNCC: 2 | RNVC: 2

1 Jan 1971

5120-14-348-7718
Open End Wrench

143487718
70-16X17: RNCC: 3 | RNVC: 2

19 Apr 1978

5120-14-220-6360
Cable Type Ratchet Lever Puller

142206360
2501-82-11004: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-517-9941
Six Point Tip Screwdriver

145179941
ENFD6577-8X50: RNCC: 3 | RNVC: 2

21 Jan 2000

5120-14-385-3372
Mechanical Puller Attachment

143853372
365A93-3346-22: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-398-5068
Outillage De Reglag

143985068
0U50330: RNCC: 3 | RNVC: 2
85-692-6975: RNCC: 6 | RNVC: 9

31 Jan 1985

5120-14-232-9937
Matrice De Sertissa

142329937
48756-1: RNCC: 3 | RNVC: 2
48756: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-573-1258
Ratchet Wrench

145731258
467F.19: RNCC: 3 | RNVC: 2

17 Sep 2012

5120-14-404-2818
Extracteur Tuyere

144042818
7M383: RNCC: 3 | RNVC: 2

18 Sep 1985

5120-14-561-0731
Drift

145610731
214.10: RNCC: 3 | RNVC: 2

12 Jun 2009

5120-14-375-3104
Extracteur Dergot

143753104
A33136S: RNCC: 3 | RNVC: 2

26 Feb 1982

5120-14-357-9990
Essais Support

143579990
MKM0435100: RNCC: 3 | RNVC: 2
MKM0435100: RNCC: 5 | RNVC: 2

20 Jul 1979

5120-14-362-1749
Faux Mors

143621749
C46329: RNCC: 3 | RNVC: 2

20 Feb 1980

5120-14-564-9200
Flat Tip Screwdriver

145649200
AW6,5X150: RNCC: 3 | RNVC: 2
3148517740655: RNCC: 5 | RNVC: 2
774065: RNCC: 5 | RNVC: 2

17 Jun 2010

5120-14-318-6430

5120-14-378-5711
Face Spanner Wrench Socket

143785711
UHG303-24-03: RNCC: 3 | RNVC: 2
UHG303-24-03: RNCC: 5 | RNVC: 2

11 Aug 1982

5120-14-348-7717
Open End Wrench

143487717
70-14X15: RNCC: 3 | RNVC: 2
3272670255593: RNCC: 5 | RNVC: 2

19 Apr 1978

5120-14-419-8331
Cle Rallonge

144198331
100-534: RNCC: 3 | RNVC: 2

5 Nov 1987

5120-14-570-5645
Face Spanner Wrench Socket

145705645
A550795: RNCC: 3 | RNVC: 2

5 Jan 2012

5120-14-370-6165
Equipe Vis De Verin

143706165
13-5205-510: RNCC: 3 | RNVC: 2

18 May 1981

5120-14-245-2078
Pince Extraction Co

142452078
M15515-25: RNCC: 3 | RNVC: 2
M15515-25: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-385-3480
Fourreau De Reglage

143853480
6806P33-6144-20: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-433-5076
De Maintien Cle

144335076
853-190-032-0: RNCC: 3 | RNVC: 2

2 Aug 1989

5120-14-406-6193
Joints Emmanche

144066193
853-200-791-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-337-3432
Spanner Wrench

143373432
BR4X526BIS: RNCC: 3 | RNVC: 2
4X526BIS: RNCC: 5 | RNVC: 2
RT74794-1: RNCC: 5 | RNVC: 2
85-100-4934: RNCC: 6 | RNVC: 9

7 Oct 1976

5120-14-379-8423
Outil Mise A Longu

143798423
6801-6784041500: RNCC: 3 | RNVC: 2
68.01.N.67.840.415: RNCC: 5 | RNVC: 2
6801N6784041500: RNCC: 5 | RNVC: 2

20 Oct 1982

5120-14-323-2062
Open End Wrench

143232062
NO PRIMARY REF14-323-2062: RNCC: 3 | RNVC: 2
16-5-8X3-4: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-392-0870
Torque Wrench Adapter

143920870
853-100-099-0: RNCC: 3 | RNVC: 2

21 Mar 1984

5120-14-479-0335
Face Spanner Wrench Socket

144790335
888-352-800-1: RNCC: 3 | RNVC: 2

6 Dec 1995

5120-14-241-0277

5120-14-516-8044
Poussoir

145168044
5001008690: RNCC: 3 | RNVC: 2

18 Oct 1999

5120-14-448-6528
Seal Inserter And Remover

144486528
45181193: RNCC: 3 | RNVC: 2
45181193: RNCC: 5 | RNVC: 9

4 Jul 1991

5120-14-256-8114
Fixed Open End Wrench Set

142568114
065030010005: RNCC: 3 | RNVC: 2

1 Jan 1969

5120-14-040-0676
Poussoir

140400676
NO PRIMARY REF14-040-0676: RNCC: 3 | RNVC: 2
BL43954: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-222-6193
Socket Wrench Socket

142226193
M5-16KK: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-350-6780
Pliers

143506780
NO PRIMARY REF14-350-6780: RNCC: 3 | RNVC: 2
C1080X001A14407: RNCC: 5 | RNVC: 9

12 Jul 1978

5120-14-424-3425
Socket Head Screw Key

144243425
E74331A5U: RNCC: 2 | RNVC: 2
E74331-5AU: RNCC: 5 | RNVC: 2

19 May 1988

5120-14-222-6187
Socket Wrench Socket

142226187
M1-4KK: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-566-3368
Torque Wrench Adapter

145663368
I981M5111A7G0001-07: RNCC: 3 | RNVC: 2

8 Nov 2010

5120-14-385-3370
Mechanical Puller Attachment

143853370
365A93-3346-20: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-490-0366
Mechanical Finger

144900366
Y075-069-000A: RNCC: 3 | RNVC: 2

10 Sep 1997

5120-14-575-1700
Socket Head Screw Key

145751700
10630982: RNCC: 3 | RNVC: 1

18 Mar 2013

5120-14-318-8094
Mandrin Emmanc Roul

143188094
C58931: RNCC: 3 | RNVC: 2
100919: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-267-4514
Poincon

142674514
48127: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-343-8331

5120-14-412-6495
Socket Head Screw Key

144126495
DIV/AT1020-1/1-86: RNCC: 3 | RNVC: 2

21 Oct 1986

5120-14-395-8871
Hose Strap Band Clamping Tool

143958871
370011: RNCC: 3 | RNVC: 2

30 Oct 1984

5120-14-277-3078
Mandrin Montage Bag

142773078
13599690X: RNCC: 3 | RNVC: 2
59969: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-353-7613
Socket Head Screw Key

143537613
19299111: RNCC: 3 | RNVC: 2
19299111: RNCC: 5 | RNVC: 9

16 Jan 1979

5120-14-570-2637
Spring Inserter And Remover

145702637
UFA31533: RNCC: 3 | RNVC: 2

5 Dec 2011

5120-14-514-0142
Open End Wrench

145140142
ENFD29159-24X25: RNCC: 3 | RNVC: 2

22 Apr 1999

5120-14-505-5472
Flat Tip Screwdriver

145055472
ENFD6514-A0-4X2-5X50X125: RNCC: 3 | RNVC: 2

24 Mar 1998

5120-14-300-9645
Face Spanner Wrench Socket

143009645
341A93-3501-00: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-220-8204
Open End Wrench

142208204
33-22X25: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-325-3191
Socket Wrench Crowfoot Attachment

143253191
1950Z2 1-2IN: RNCC: 3 | RNVC: 2
1950Z2 1-2IN: RNCC: 5 | RNVC: 1
85-581-4355: RNCC: 6 | RNVC: 9

2 Jul 1975

5120-14-386-1596
Spanner Wrench

143861596
6801P32-4303-20: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-293-0986
Flat Tip Screwdriver

142930986
NFP0: RNCC: 3 | RNVC: 2
ABB.4X40: RNCC: 3 | RNVC: 2
3148510037004: RNCC: 5 | RNVC: 2
ABB4X40: RNCC: 5 | RNVC: 2
0115289W00: RNCC: 5 | RNVC: 2
369644: RNCC: 5 | RNVC: 2
91504410: RNCC: 5 | RNVC: 2
0003700: RNCC: 5 | RNVC: 9
ABB4-5X40: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-326-2783
Mechanical Puller Attachment

143262783
330A98-3435-26: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-272-3653
Open End Wrench

142723653
E74302S19X22AKB: RNCC: 2 | RNVC: 2
0102428: RNCC: 3 | RNVC: 2
44.19X22: RNCC: 5 | RNVC: 2
44-19X22: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-386-1551
Bearing And Bushing Inserter

143861551
6801J32-1667-00: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-414-0200
Msc Grease For Gask

144140200
89099145: RNCC: 3 | RNVC: 2
800-524: RNCC: 5 | RNVC: 2

22 Jan 1987

5120-14-041-8329
Female Electrical Contact Resizing Tool

140418329
DF92-302-12: RNCC: 3 | RNVC: 2
9DF92-302-12: RNCC: 5 | RNVC: 2

1 Jan 1974

5120-14-216-4176
Socket Wrench Crowfoot Attachment

142164176
300245: RNCC: 3 | RNVC: 2
881-00-030-59: RNCC: 5 | RNVC: 2
8810003059: RNCC: 5 | RNVC: 2
300245: RNCC: 5 | RNVC: 2
100-116A: RNCC: 5 | RNVC: 9
100-16A: RNCC: 5 | RNVC: 9
116: RNCC: 5 | RNVC: 9
116A: RNCC: 5 | RNVC: 9
DIAMETRE16ASERIE100: RNCC: 5 | RNVC: 9
W0F116A: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-334-0706
Screwdriver Bit

143340706
0025035: RNCC: 3 | RNVC: 2
ET.107/32: RNCC: 5 | RNVC: 2
85-688-4334: RNCC: 6 | RNVC: 9

23 Apr 1976

5120-14-210-9885
Open End Wrench

142109885
70-50X54: RNCC: 3 | RNVC: 2

1 Jan 1964

5120-14-292-0801
Appareil Essais

142920801
NO PRIMARY REF14-292-0801: RNCC: 3 | RNVC: 2
S66: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-444-3163

5120-14-405-5825
Molder's Foundry Spoon

144055825
F52280-2: RNCC: 3 | RNVC: 2

4 Dec 1985

5120-14-321-8791
Cle De Manoeuvre

143218791
GSM449-006: RNCC: 3 | RNVC: 2
A0371-005: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-323-9820
Open End Wrench

143239820
M2-060-1: RNCC: 3 | RNVC: 2
85-101-0500: RNCC: 6 | RNVC: 9

1 Jan 1975

5120-14-479-0293
Face Spanner Wrench Socket

144790293
888-358-300-1: RNCC: 3 | RNVC: 2

6 Dec 1995

5120-14-264-0596
Screwdriver Bit

142640596
12-10-1-5X7: RNCC: 2 | RNVC: 2

1 Jan 1970

5120-14-456-7143
Evasage Mandrin

144567143
853-930-169-0: RNCC: 3 | RNVC: 2

24 Jul 1992

5120-14-398-2229
Speciale Cle

143982229
851-190-004-0: RNCC: 3 | RNVC: 2

31 Jan 1985

5120-14-460-2866
Sheet Metalworking Stake

144602866
853-930-097-0: RNCC: 3 | RNVC: 2

21 Jan 1993

5120-14-240-0074
Extracteur Decouvil

142400074
923AREP6: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-247-3896

5120-14-271-8511

5120-14-494-3594
Clef

144943594
NO PRIMARY REF14-494-3594: RNCC: 3 | RNVC: 2
334-4X100: RNCC: 5 | RNVC: 9
F300 0T 017 1090: RNCC: 6 | RNVC: 9

15 Oct 1997

5120-14-567-1809
Mechanical Puller

145671809
U.232-130: RNCC: 3 | RNVC: 2
771180: RNCC: 5 | RNVC: 2
3148517711808: RNCC: 5 | RNVC: 2

18 Feb 2011

5120-14-466-5925
Bearing And Bushing Remover

144665925
851-500-017-0: RNCC: 3 | RNVC: 2

17 Nov 1993

5120-14-423-2276
Basculeur Cle Dyn

144232276
SP1735D-3-1060: RNCC: 3 | RNVC: 2

13 Apr 1988

5120-14-426-5806
Spanner Wrench

144265806
NO PRIMARY REF14-426-5806: RNCC: 3 | RNVC: 2
E0951634: RNCC: 5 | RNVC: 9

8 Sep 1988

5120-14-463-4272
Outil De Reglage

144634272
NO PRIMARY REF14-463-4272: RNCC: 3 | RNVC: 2
BLB268: RNCC: 5 | RNVC: 9
85-694-9888: RNCC: 6 | RNVC: 9

9 Jun 1993

5120-14-244-4146
Socket Wrench Socket

142444146
J.23: RNCC: 3 | RNVC: 2
J-23: RNCC: 3 | RNVC: 2
J23: RNCC: 3 | RNVC: 2
00.45.73.14: RNCC: 5 | RNVC: 2
3148510272702: RNCC: 5 | RNVC: 2
J23: RNCC: 5 | RNVC: 2
3272670279087: RNCC: 5 | RNVC: 2
0027270: RNCC: 5 | RNVC: 9
74J23: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-253-7075
Obus De Protection

142537075
G1-15-508: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-570-7630
Flat Tip Screwdriver

145707630
TB-35E75: RNCC: 3 | RNVC: 2

23 Jan 2012

5120-14-462-5886
Mise En For Support

144625886
S16-0610-0800: RNCC: 3 | RNVC: 2

28 Apr 1993

5120-14-205-5703
Spanner Wrench

142055703
253-5M21A3B: RNCC: 3 | RNVC: 9
RU253-5M21A3B: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-514-8397
Cross Tip Screwdriver

145148397
ENFD6569-0X40: RNCC: 3 | RNVC: 2

21 Jun 1999

5120-14-352-3163
Montage Joint Obus

143523163
MGE288-23: RNCC: 3 | RNVC: 2
MGE288-23: RNCC: 5 | RNVC: 2

16 Oct 1978

5120-14-525-9475
Spanner Wrench

145259475
888-417-100-1: RNCC: 3 | RNVC: 2

20 Jun 2001

5120-14-497-3526
Flat Tip Screwdriver

144973526
NO PRIMARY REF14-497-3526: RNCC: 3 | RNVC: 2
260-4: RNCC: 5 | RNVC: 9
F300 0T 023 0472: RNCC: 6 | RNVC: 9

15 Oct 1997

5120-14-379-4424
Spanner Wrench

143794424
A33134Q01: RNCC: 3 | RNVC: 2
A33134Q: RNCC: 5 | RNVC: 2

1 Oct 1982

5120-14-489-7414
Cross Tip Screwdriver

144897414
466.00: RNCC: 3 | RNVC: 2

13 Aug 1997

5120-14-226-0547

5120-14-220-8415

5120-14-371-5669
Tige Dextraction

143715669
9970-125-760: RNCC: 3 | RNVC: 2

5 Aug 1981

5120-14-404-0803
Torque Wrench Adapter

144040803
853-100-151-0: RNCC: 3 | RNVC: 2

11 Sep 1985

5120-14-444-0207
Hand Hose Fitting Swaging Tool Kit

144440207
357-4-1500: RNCC: 3 | RNVC: 2
3574150: RNCC: 5 | RNVC: 2

18 Dec 1990

5120-14-393-2219
Hand Terminal Crimping Tool

143932219
873-S-045: RNCC: 3 | RNVC: 2
873S020: RNCC: 5 | RNVC: 2
873S045: RNCC: 5 | RNVC: 2

12 Apr 1984

5120-14-464-9028
Wrench Extension Handle

144649028
851-912-030-0: RNCC: 3 | RNVC: 2

8 Sep 1993

5120-14-450-4029
Spanner Wrench

144504029
NO PRIMARY REF14-450-4029: RNCC: 3 | RNVC: 2
BL53971: RNCC: 5 | RNVC: 9

3 Oct 1991

5120-14-247-8017
Guide Emmanchement

142478017
3210-95-37-050: RNCC: 3 | RNVC: 2
3210-95-37-050: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-513-9469
Flat Tip Screwdriver

145139469
ENFD6560-1-6X8X175: RNCC: 3 | RNVC: 2

19 Apr 1999

5120-14-572-4885
Stuffing Box And Pump Packing Extractor Set

145724885
52932101: RNCC: 3 | RNVC: 2
529321-1: RNCC: 5 | RNVC: 9

9 Jul 2012

5120-14-200-9334
Socket Wrench Socket

142009334
S.1'1/16: RNCC: 3 | RNVC: 2
3148510546001: RNCC: 5 | RNVC: 2
S1 1-16: RNCC: 5 | RNVC: 2
0054600: RNCC: 5 | RNVC: 9

1 Jan 1962

5120-14-432-0761
Expandeur Soufflet

144320761
NO PRIMARY REF14-4320761: RNCC: 3 | RNVC: 2
0061340: RNCC: 5 | RNVC: 2
T.106: RNCC: 5 | RNVC: 2

22 May 1989

5120-14-346-5040
Cross Tip Screwdriver

143465040
HE586-6080: RNCC: 3 | RNVC: 2
T0URNEVPHILAMAN1: RNCC: 5 | RNVC: 9

12 Dec 1977

5120-14-276-3127
Socket Wrench Socket

142763127
65L23-12PANS: RNCC: 3 | RNVC: 2
S23: RNCC: 3 | RNVC: 2
S-23: RNCC: 3 | RNVC: 2
S23: RNCC: 3 | RNVC: 2
S23: RNCC: 3 | RNVC: 9
3272670296022: RNCC: 5 | RNVC: 2
3148510536507: RNCC: 5 | RNVC: 2
DEMS23: RNCC: 5 | RNVC: 9
75S23: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-435-3709
Locking Device Removal Tool

144353709
854-290-041-0: RNCC: 3 | RNVC: 2

8 Nov 1989

5120-14-479-0312
Spanner Wrench

144790312
888-373-800-1: RNCC: 3 | RNVC: 2

6 Dec 1995

5120-14-378-3891
Open End Wrench

143783891
10-27X29-P: RNCC: 3 | RNVC: 2
10-27X29P: RNCC: 3 | RNVC: 2
3272670271593: RNCC: 5 | RNVC: 2
10-27X29CP: RNCC: 5 | RNVC: 9

11 Aug 1982

5120-14-393-5629
Spanner Wrench

143935629
MN7062RUF1/1-7062RFF1/2ET2/2: RNCC: 3 | RNVC: 9
MN7062RUF1-1-7062RFF1-2ET2-2: RNCC: 5 | RNVC: 9

7 Apr 1984

5120-14-355-5500
Spanner Wrench

143555500
MHJ365-21: RNCC: 3 | RNVC: 2
MHJ365-21: RNCC: 5 | RNVC: 2

19 Mar 1979

5120-14-270-6335
Bague De Serrage

142706335
S10-0150-0901: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-304-3149
Bague De Retreint

143043149
S16-0606-1921: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-321-1583
Screw Thread Insert Inserter

143211583
01500103000: RNCC: 3 | RNVC: 2
1735A03050: RNCC: 5 | RNVC: 2
32070260: RNCC: 5 | RNVC: 2
85-681-2780: RNCC: 6 | RNVC: 9

1 Jan 1975

5120-14-442-8472
Socket Wrench Socket

144428472
4178-195-000: RNCC: 3 | RNVC: 2
4178-195-000: RNCC: 5 | RNVC: 2

7 Nov 1990

5120-14-446-8330
Flat Tip Screwdriver

144468330
NO PRIMARY REF14-446-8330: RNCC: 3 | RNVC: 2
0005761: RNCC: 5 | RNVC: 2
AG.14X250: RNCC: 5 | RNVC: 2
AG14X250: RNCC: 5 | RNVC: 2

17 Apr 1991

5120-14-479-0451
Spanner Wrench

144790451
D05-0224: RNCC: 3 | RNVC: 2

11 Dec 1995

5120-14-371-4262
Spanner Wrench

143714262
6254-57037: RNCC: 3 | RNVC: 2

5 Aug 1981

5120-14-384-9219
Freinoir Droit

143849219
9970-126-140: RNCC: 3 | RNVC: 2

2 Jun 1983

5120-14-309-6466
Socket Wrench Socket

143096466
D0UILLE1-21N56233: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-317-4501
Socket Head Screw Key

143174501
E74331-5AKB: RNCC: 2 | RNVC: 2

1 Jan 1975

5120-14-498-9846
Marteau

144989846
74689-V1: RNCC: 3 | RNVC: 2
E35050: RNCC: 5 | RNVC: 9
F300 0T 014 8426: RNCC: 6 | RNVC: 9

29 Oct 1997

5120-14-263-6763
Cle Blocage Capot

142636763
FH86-916: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-514-0217
Open End Wrench

145140217
ENFD29159-55X60: RNCC: 3 | RNVC: 2

22 Apr 1999

5120-14-329-6400
Cle De Maintien

143296400
MHN150-21: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-245-8333
Cle Pour Fusibles E

142458333
PA355-143A1P11: RNCC: 3 | RNVC: 9
PA355-143A1P11: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-231-9944
Douille De Cle A Do

142319944
M3-094: RNCC: 3 | RNVC: 2
M3-094: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-427-2118
Spanner Wrench

144272118
46AM091-00-0001: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-354-9004
Verrou Extracteur

143549004
D47734: RNCC: 3 | RNVC: 2

20 Feb 1979

5120-14-424-0662
Outil Appui Piston

144240662
75545912800: RNCC: 3 | RNVC: 2
314826: RNCC: 5 | RNVC: 9
755459128: RNCC: 5 | RNVC: 9
43436700: RNCC: 5 | RNVC: 9

11 May 1988

5120-14-406-6411
Extraction Outil

144066411
OUT9338: RNCC: 3 | RNVC: 2
0UT9338: RNCC: 5 | RNVC: 2

8 Jan 1986

5120-14-248-1084

5120-14-392-0877

5120-14-225-8917

5120-14-452-2047
Fixed Open End Wrench Set

144522047
44.P12E: RNCC: 3 | RNVC: 2
3148515303050: RNCC: 5 | RNVC: 2
0530100: RNCC: 5 | RNVC: 9

6 Jan 1992

5120-14-552-6683
Spanner Wrench

145526683
10668708000: RNCC: 3 | RNVC: 2

23 Jan 2007

5120-14-385-9820
Spanner Wrench

143859820
0.411/60122: RNCC: 3 | RNVC: 2
0411-60122: RNCC: 5 | RNVC: 2

24 Aug 1983

5120-14-235-2686
Socket Wrench Screwdriver Attachment

142352686
RT.3/16: RNCC: 3 | RNVC: 2
RT3-16: RNCC: 5 | RNVC: 2
3148515143403: RNCC: 5 | RNVC: 2
0514340: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-434-7907
Filete Embout

144347907
853-700-319-0: RNCC: 3 | RNVC: 2

4 Oct 1989

5120-14-212-3805
Open End Wrench

142123805
33-29X32CHR0MEMAT: RNCC: 3 | RNVC: 2

1 Jan 1964

5120-14-517-3830
Solid Center Punch

145173830
0XB501-108-702-29: RNCC: 3 | RNVC: 2

8 Dec 1999

5120-14-249-9698
Tap And Reamer Wrench

142499698
830A.10: RNCC: 3 | RNVC: 2
3148512064992: RNCC: 5 | RNVC: 2
830-10: RNCC: 5 | RNVC: 2
830.10: RNCC: 5 | RNVC: 2
5120AAC10: RNCC: 5 | RNVC: 2
0206500: RNCC: 5 | RNVC: 2
1715 42 02: RNCC: 5 | RNVC: 2
C0PW3525025: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-386-9733
Outil Douille Culbu

143869733
26545912000: RNCC: 3 | RNVC: 2
21033300: RNCC: 5 | RNVC: 2
26.545.9120.00: RNCC: 5 | RNVC: 2
26545912000: RNCC: 5 | RNVC: 2
210333-00: RNCC: 5 | RNVC: 2
265459120: RNCC: 5 | RNVC: 9

24 Aug 1983

5120-14-274-2862
Spanner Wrench

142742862
D1512-2208: RNCC: 3 | RNVC: 2
D1512-2208: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-383-6521
Vise Jaw Caps

143836521
S10-0152-0461: RNCC: 3 | RNVC: 2

11 Apr 1983

5120-14-368-5062
Face Spanner Wrench Socket

143685062
236800-1-78: RNCC: 3 | RNVC: 2
TF10A32427-1: RNCC: 5 | RNVC: 2
85-691-1894: RNCC: 6 | RNVC: 9

20 Feb 1981

5120-14-433-3203
Lot Pose-Joint

144333203
853-202-803-0: RNCC: 3 | RNVC: 2

19 Jul 1989

5120-14-362-2134
De Centrage Obus

143622134
30MS017-0000004: RNCC: 3 | RNVC: 2

20 Feb 1980

5120-14-394-9012
Adjustable Wrench

143949012
113.6EC: RNCC: 3 | RNVC: 2
113-6EC: RNCC: 5 | RNVC: 2
3148511326107: RNCC: 5 | RNVC: 2
0110626L00: RNCC: 5 | RNVC: 2
16401053-9: RNCC: 5 | RNVC: 2
91352549: RNCC: 5 | RNVC: 2
250-4289: RNCC: 5 | RNVC: 2
0132610: RNCC: 5 | RNVC: 9
FACOM113.6EC: RNCC: 5 | RNVC: 9

2 Oct 1984

5120-14-271-5233
Bloc De Pre-Sertiss

142715233
RMPS5F10X1-6M: RNCC: 3 | RNVC: 2
RMPS4F6-8-10M: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-386-5318
Mechanical Puller Attachment

143865318
3130S95-63-103: RNCC: 3 | RNVC: 2
3130-95-63-103: RNCC: 5 | RNVC: 2
SE3130S95-63.103: RNCC: 5 | RNVC: 2

24 Aug 1983

5120-14-404-0344
Maintien Filt Pince

144040344
9970-121-324: RNCC: 3 | RNVC: 2

11 Sep 1985

5120-14-364-9924
Masse De Plomb

143649924
528927-01: RNCC: 3 | RNVC: 2

2 Sep 1980

5120-14-473-0591
Outil Remplac Joint

144730591
MAT514-0037: RNCC: 3 | RNVC: 2

7 Dec 1994

5120-14-223-4992
Speciale Cle Double

142234992
9970-115-048: RNCC: 3 | RNVC: 2
9970-115-048-00: RNCC: 5 | RNVC: 2

1 Jan 1966

5120-14-498-1105
Etampe

144981105
M0B19-45: RNCC: 3 | RNVC: 2
M0B19-15: RNCC: 3 | RNVC: 2
F300 0T 003 2958: RNCC: 6 | RNVC: 9

29 Oct 1997

5120-14-536-5284
Combination Box And Open End Wrench

145365284
40R.11/32: RNCC: 3 | RNVC: 2
3148511011980: RNCC: 5 | RNVC: 2

28 Aug 2003

5120-14-565-4029
Hand Beading Tool

145654029
037639: RNCC: 3 | RNVC: 2
376 39: RNCC: 5 | RNVC: 2
37639: RNCC: 5 | RNVC: 9

13 Aug 2010

5120-14-230-6676

5120-14-386-6801
Socket Wrench Socket

143866801
853-100-088-0: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-276-3076
Socket Wrench Socket

142763076
NO PRIMARY REF14-276-3076: RNCC: 3 | RNVC: 2
0051250: RNCC: 5 | RNVC: 2
R.5,5L: RNCC: 5 | RNVC: 2
R5-5L: RNCC: 5 | RNVC: 2
91588035: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-263-6759
Cle De Blocage Pale

142636759
FH86-904: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-382-7077
Insertion Axe Outil

143827077
6391-121E27-503-69-2: RNCC: 3 | RNVC: 2
6391-121E27-503-69-2: RNCC: 5 | RNVC: 2

17 Feb 1983

5120-14-261-5284
Torque Wrench Adapter

142615284
D-16: RNCC: 3 | RNVC: 2
D16: RNCC: 3 | RNVC: 2
3272670256958: RNCC: 5 | RNVC: 2
M2-051: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-392-7206
Spanner Wrench

143927206
043801-602000: RNCC: 3 | RNVC: 2
0438-01-602000: RNCC: 5 | RNVC: 2

7 Apr 1984

5120-14-301-0973
Bearing Staking Installation Tool

143010973
330A98-2169-00: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-565-5083
Torque Wrench

145655083
D1596-0274: RNCC: 3 | RNVC: 2

26 Aug 2010

5120-14-280-2406
Buteede Reglage

142802406
15500-20-29: RNCC: 3 | RNVC: 2
15500-20-29: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-399-7126
Straps For Mounting

143997126
25545985100: RNCC: 3 | RNVC: 2
106351: RNCC: 5 | RNVC: 2
255459851: RNCC: 5 | RNVC: 9
25545985100: RNCC: 5 | RNVC: 9

6 Mar 1985

5120-14-490-8789
Tournev

144908789
4065 200 000 674: RNCC: 3 | RNVC: 2
F300 0T 000 5059: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-299-4511

5120-14-221-6994

5120-14-258-5042
Levier Pour Arrache

142585042
10285: RNCC: 3 | RNVC: 2
MQ-22A: RNCC: 6 | RNVC: 9

1 Jan 1969

5120-14-381-6641
Chassoir Bronze

143816641
AA7,62NF-1677: RNCC: 3 | RNVC: 2
AA7-62NF-1677: RNCC: 5 | RNVC: 2

25 Jan 1983

5120-14-317-7962
Cle Pour Ecrou-Obus

143177962
NO PRIMARY REF14-317-7962: RNCC: 3 | RNVC: 2
842724-79: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-311-4542
Bearing And Bushing Inserter And Remover

143114542
3160S95-33-145: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-466-5145
Face Spanner Wrench Socket

144665145
90006: RNCC: 3 | RNVC: 2
B75-12: RNCC: 5 | RNVC: 2

15 Nov 1993

5120-14-311-1703
Open End Wrench

143111703
NO PRIMARY REF14-311-1703: RNCC: 3 | RNVC: 2
0110730X00: RNCC: 5 | RNVC: 2
91369537: RNCC: 5 | RNVC: 2
0713 304 055: RNCC: 5 | RNVC: 2
0102358: RNCC: 5 | RNVC: 2
44-5X5-5: RNCC: 5 | RNVC: 9
44.5X5,5: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-276-3144
Socket Wrench Socket

142763144
K38: RNCC: 3 | RNVC: 2
C-38: RNCC: 3 | RNVC: 2
K38: RNCC: 3 | RNVC: 2
C38: RNCC: 3 | RNVC: 2
3272670271418: RNCC: 5 | RNVC: 2
DEMK38: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-399-2080
Socket Head Screw Key

143992080
63-5-64: RNCC: 3 | RNVC: 2
63-5/64: RNCC: 3 | RNVC: 2
3272670256583: RNCC: 5 | RNVC: 2

6 Mar 1985

5120-14-459-3424
Combination Box And Open End Wrench

144593424
39.5/32H: RNCC: 3 | RNVC: 2
3148510999029: RNCC: 5 | RNVC: 2
0099902: RNCC: 5 | RNVC: 9

26 Nov 1992

5120-14-310-2646
Spanner Wrench

143102646
GEDSM71-10M13-06P1: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-391-1111
Electrical Contact Inserter

143911111
M15513-20: RNCC: 3 | RNVC: 2

1 Mar 1984

5120-14-222-7181
Open End Wrench

142227181
NO PRIMARY REF14-222-7181: RNCC: 3 | RNVC: 2
BB85: RNCC: 5 | RNVC: 9
1144-21X23: RNCC: 5 | RNVC: 9

1 Jan 1966

5120-14-540-8207
Plug Electrical Connector Extractor

145408207
8630-3330: RNCC: 3 | RNVC: 2

23 Apr 2004

5120-14-501-0570
Socket Wrench Socket

145010570
NK.33: RNCC: 3 | RNVC: 2
NK33: RNCC: 5 | RNVC: 2
3148510366401: RNCC: 5 | RNVC: 2
NK-33: RNCC: 5 | RNVC: 2
F300 0T 025 0886: RNCC: 6 | RNVC: 9

29 Oct 1997

5120-14-267-6755
Universal Puller Kit

142676755
NO PRIMARY REF14-267-6755: RNCC: 3 | RNVC: 2
16B8013: RNCC: 5 | RNVC: 9

1 Jan 1970

5120-14-444-4563
Combination Box And Open End Box Wrench

144444563
231446: RNCC: 3 | RNVC: 2
85-694-3560: RNCC: 6 | RNVC: 9

9 Jan 1991

5120-14-457-6919
Torque Wrench Adapter

144576919
1265-090B506: RNCC: 3 | RNVC: 2
1265-090B506: RNCC: 5 | RNVC: 2

15 Sep 1992

5120-14-406-6209
Guidage Broche

144066209
853-201-396-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-411-5895
Cle A Panier

144115895
GSM196-010F13: RNCC: 3 | RNVC: 2
GSM196-10F13: RNCC: 5 | RNVC: 2

26 Aug 1986

5120-14-383-6524
Vise Jaw Caps

143836524
S10-0152-1042: RNCC: 3 | RNVC: 2

11 Apr 1983

5120-14-514-3590
Tire Bourre

145143590
NO PRIMARY REF14-514-3590: RNCC: 3 | RNVC: 2
41T3303-1/2: RNCC: 5 | RNVC: 2
NNP5120860757257: RNCC: 5 | RNVC: 2
41T3303-1/2: RNCC: 5 | RNVC: 9

12 May 1999

5120-14-382-8076
Canon De Percage

143828076
851-600-863-0: RNCC: 3 | RNVC: 2
85-691-9916: RNCC: 6 | RNVC: 9

17 Feb 1983

5120-14-393-8861
Emmanchement Outil

143938861
NO PRIMARY REF14-393-8861: RNCC: 3 | RNVC: 2
OU138371: RNCC: 5 | RNVC: 9

23 Jun 1984

5120-14-329-6364
Support Detau

143296364
MFG231-21: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-259-3190
Cle Pour Condensate

142593190
NO PRIMARY REF14-259-3190: RNCC: 3 | RNVC: 2
22993: RNCC: 5 | RNVC: 9
22993: RNCC: 5 | RNVC: 9

1 Jan 1969

5120-14-374-1701
Spanner Wrench

143741701
NO PRIMARY REF14-374-1701: RNCC: 3 | RNVC: 2
48-26-04-009: RNCC: 5 | RNVC: 9

8 Dec 1981

5120-14-326-1422
Cles Tarage Ressort

143261422
73115-01-22P3REP2: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-447-3398
Flat Tip Screwdriver Set

144473398
NO PRIMARY REF14-447-3398: RNCC: 3 | RNVC: 2
0500715: RNCC: 5 | RNVC: 2
ATHH.J8: RNCC: 5 | RNVC: 2
91714536: RNCC: 5 | RNVC: 2

15 May 1991

5120-14-578-0288
Socket Head Screw Key Set

145780288
82H.JP9A: RNCC: 3 | RNVC: 2
0919762: RNCC: 5 | RNVC: 2
3148519197624: RNCC: 5 | RNVC: 2

23 Oct 2013

5120-14-559-4117
Spring Inserter And Remover

145594117
REF832: RNCC: 3 | RNVC: 2

8 Jan 2009

5120-14-232-9248
Tournevis Special

142329248
78577: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-421-6298
Open End Wrench

144216298
210016: RNCC: 3 | RNVC: 2

20 Jan 1988

5120-14-572-8441
Socket Wrench Socket

145728441
120010: RNCC: 3 | RNVC: 2
7612206012317: RNCC: 5 | RNVC: 2

13 Aug 2012

5120-14-511-0289
Screwdriver Bit

145110289
EH.105/32: RNCC: 3 | RNVC: 2

25 Nov 1998

5120-14-416-4993
Pliers

144164993
239-20-CP: RNCC: 3 | RNVC: 2
239-20CP: RNCC: 3 | RNVC: 2
3272670268999: RNCC: 5 | RNVC: 2

10 Jun 1987

5120-14-319-4066
Torque Wrench Adapter

143194066
DC-5-1': RNCC: 3 | RNVC: 2
DC5-1: RNCC: 3 | RNVC: 2
3272670247567: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-321-8443
Spanner Wrench

143218443
0060003170: RNCC: 3 | RNVC: 2
85-656-6500: RNCC: 6 | RNVC: 9

1 Jan 1975

5120-14-314-9115
Open End Wrench

143149115
M2-060-9: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-527-6502
Retaining Ring Installation Tool

145276502
888-488-900-1: RNCC: 3 | RNVC: 2

7 Nov 2001

5120-14-283-3964
Outil Spec Raccord

142833964
121E95-115-10-0: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-307-7520
Arrache Douille

143077520
NO PRIMARY REF14-307-7520: RNCC: 3 | RNVC: 2
0DH2417: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-217-3976
Cle Pour Connecteur

142173976
NO PRIMARY REF14-217-3976: RNCC: 3 | RNVC: 2
22992-1: RNCC: 5 | RNVC: 9
22992-1: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-343-9853
Cle Pour Ecrou Dent

143439853
9970-115-229: RNCC: 3 | RNVC: 2
85-689-5592: RNCC: 6 | RNVC: 9

13 Jul 1977

5120-14-263-8843
Bouchon De Controle

142638843
17-9-1105: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-212-9225
Cle Speciale Pour E

142129225
9970-115-212-01: RNCC: 3 | RNVC: 2
9970-115-212: RNCC: 3 | RNVC: 2

1 Jan 1964

5120-14-549-1720
Bearing And Bushing Remover

145491720
888-394-700-2: RNCC: 3 | RNVC: 2

7 Mar 2006

5120-14-302-5043
Outil Tarage Ressor

143025043
NO PRIMARY REF14-302-5043: RNCC: 3 | RNVC: 2
42-27-04-019: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-501-0657
Torque Wrench Adapter

145010657
NO PRIMARY REF14-501-0657: RNCC: 3 | RNVC: 2
E0-163: RNCC: 5 | RNVC: 9
EXT-163: RNCC: 5 | RNVC: 9
EXT163: RNCC: 5 | RNVC: 9
F300 0T 025 0989: RNCC: 6 | RNVC: 9

29 Oct 1997

5120-14-317-1299

5120-14-369-7607
Faux Mors

143697607
F46423: RNCC: 3 | RNVC: 2

17 Apr 1981

5120-14-280-6120
Cambreur

142806120
HK1-58: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-212-9567
Outillage Demontage

142129567
NO PRIMARY REF14-212-9567: RNCC: 3 | RNVC: 2
156478: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-424-0529
Seal Inserter And Remover

144240529
6501D23-016: RNCC: 3 | RNVC: 2
6501-3210-23016: RNCC: 5 | RNVC: 2
85-692-9463: RNCC: 6 | RNVC: 9

10 May 1988

5120-14-420-9405
Equipement Rempliss

144209405
080202597350: RNCC: 3 | RNVC: 2

5 Jan 1988

5120-14-461-1090
Spring Inserter And Remover

144611090
TB40601: RNCC: 1 | RNVC: 2
005100251B: RNCC: 3 | RNVC: 2
B51002-51: RNCC: 5 | RNVC: 2

24 Feb 1993

5120-14-374-6766
Spanner Wrench

143746766
D1512-2239: RNCC: 3 | RNVC: 2
D1512-2239: RNCC: 5 | RNVC: 9

30 Jan 1982

5120-14-380-3976
Electrical Contact Inserter

143803976
282881: RNCC: 3 | RNVC: 2
85-800-9692: RNCC: 6 | RNVC: 9

8 Nov 1982

5120-14-549-7096
Socket Wrench Screwdriver Attachment

145497096
D.107-14: RNCC: 3 | RNVC: 2

2 May 2006

5120-14-346-5102
Screwdriver Bit

143465102
I480-1: RNCC: 3 | RNVC: 2
1231: RNCC: 5 | RNVC: 9
I480-1: RNCC: 5 | RNVC: 9
85-069-7640: RNCC: 6 | RNVC: 9

12 Dec 1977

5120-14-402-7156
Embout Specifique

144027156
16965961: RNCC: 1 | RNVC: 2
65-3-01-045A00-611060B: RNCC: 3 | RNVC: 2
0416228S00: RNCC: 5 | RNVC: 2
16965961: RNCC: 5 | RNVC: 9

19 Jul 1985

5120-14-313-7292
Cone De Montage

143137292
S16-0609-1261: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-227-5467
Cle De Douille

142275467
NO PRIMARY REF14-227-5467: RNCC: 3 | RNVC: 2
2825: RNCC: 5 | RNVC: 9

1 Jan 1966

5120-14-415-4715
Extraction Outil

144154715
4714: RNCC: 3 | RNVC: 2

18 May 1987

5120-14-385-3469
Plaque Support Bta

143853469
6805P33-6001-00: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-265-6843
Noix De La Cle

142656843
M208-25025: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-385-3481
Support Couvercle

143853481
6807J33-4007-00: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-567-1586
Retaining Ring Pliers

145671586
179A.32: RNCC: 3 | RNVC: 2
3148518230827: RNCC: 5 | RNVC: 2
823082: RNCC: 5 | RNVC: 2

16 Feb 2011

5120-14-219-4340

5120-14-392-4545
Support De Jauge

143924545
ST184: RNCC: 3 | RNVC: 9
ROTST184: RNCC: 5 | RNVC: 9

21 Mar 1984

5120-14-444-3195
Combination Box And Open End Box Wrench

144443195
GS130-01: RNCC: 3 | RNVC: 2

7 Jan 1991

5120-14-280-0523
Hand Terminal Crimping Tool

142800523
8459-129: RNCC: 3 | RNVC: 2
91578484: RNCC: 5 | RNVC: 2
8459-129: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-201-5195
Blacksmith's Anvil

142015195
NO PRIMARY REF14-201-5195: RNCC: 3 | RNVC: 2
74721-55: RNCC: 5 | RNVC: 9

1 Jan 1962

5120-14-534-6807
Electronic Equipment Alignment Tool

145346807
222-3029-677: RNCC: 3 | RNVC: 2

2 Apr 2003

5120-14-444-6967
Spanner Wrench

144446967
600073: RNCC: 3 | RNVC: 2

16 Jan 1991

5120-14-418-7857
Outil D Introductio

144187857
Y120-004-200A: RNCC: 3 | RNVC: 2

16 Sep 1987

5120-14-454-9349
Socket Wrench Socket

144549349
S.1/2LA: RNCC: 3 | RNVC: 2
3148510556659: RNCC: 5 | RNVC: 2

29 Apr 1992

5120-14-478-1762
Bride D'etalonnage

144781762
8601F34-1013-23: RNCC: 3 | RNVC: 2

11 Oct 1995

5120-14-231-8228
Cle Speciale Pour E

142318228
9970-115-257: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-222-1410

5120-14-340-6539
Hand Tube Flaring Tool

143406539
NO PRIMARY REF14-340-6539: RNCC: 3 | RNVC: 2
239M: RNCC: 5 | RNVC: 2

14 Feb 1977

5120-14-225-5586
Cle Pour Ecrou De C

142255586
41980: RNCC: 3 | RNVC: 2
41980B: RNCC: 5 | RNVC: 2

1 Jan 1966

5120-14-572-4834
Torque Wrench Adapter

145724834
13.17: RNCC: 3 | RNVC: 2

9 Jul 2012

5120-14-426-5804
Spanner Wrench

144265804
NO PRIMARY REF14-426-5804: RNCC: 3 | RNVC: 2
E0951632: RNCC: 5 | RNVC: 9

8 Sep 1988

5120-14-550-3225
Solid Center Punch

145503225
TSR202/ACC/003/001: RNCC: 3 | RNVC: 2

15 Jun 2006

5120-14-526-2782
Mechanical Puller Adapter

145262782
U.49AR2: RNCC: 3 | RNVC: 2

13 Jul 2001

5120-14-340-6404
Socket Wrench Screwdriver Attachment

143406404
RS.4: RNCC: 3 | RNVC: 2
RS4: RNCC: 5 | RNVC: 2
0513760: RNCC: 5 | RNVC: 2
3148515137600: RNCC: 5 | RNVC: 2
130347: RNCC: 5 | RNVC: 2
91519157: RNCC: 5 | RNVC: 2

14 Feb 1977

5120-14-571-7334
Screwdriver Bit

145717334
NEV-T-50: RNCC: 3 | RNVC: 2

26 Apr 2012

5120-14-221-8238

5120-14-471-6651
Obus Extracteur

144716651
7524701: RNCC: 3 | RNVC: 2
5010099841: RNCC: 5 | RNVC: 2
0C07524701: RNCC: 5 | RNVC: 2

7 Sep 1994

5120-14-317-0315

5120-14-223-8986
Rallonge Pour Cle A

142238986
MAT196-0066F17: RNCC: 3 | RNVC: 2
MAT196-1234F13: RNCC: 3 | RNVC: 2
GSM196-11F20: RNCC: 5 | RNVC: 2
GSM196-011F20: RNCC: 5 | RNVC: 2

1 Jan 1966

5120-14-213-9277
Cle A Ergots Specia

142139277
NO PRIMARY REF14-213-9277: RNCC: 3 | RNVC: 2
X200110: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-494-0077
Chandelle

144940077
NO PRIMARY REF14-494-0077: RNCC: 3 | RNVC: 2
SEF527: RNCC: 5 | RNVC: 9
F300 0T 015 0221: RNCC: 6 | RNVC: 9

15 Oct 1997

5120-14-518-0290
Six Point Tip Screwdriver

145180290
ENFD6576-55X150-6PANS: RNCC: 3 | RNVC: 2

21 Jan 2000

5120-14-217-9956
Rallonge Speciale P

142179956
RDP0: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-490-6892
Drill

144906892
240 D 01884 020: RNCC: 3 | RNVC: 2
F300 0T 000 1001: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-208-6384
Cle Pour Moteur Per

142086384
NO PRIMARY REF14-208-6384: RNCC: 3 | RNVC: 2
5202: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-332-0784
Adaptateur Cl Carre

143320784
160-71964-02: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-283-9730
Spanner Wrench

142839730
M3-021-2: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-352-8400
Mechanical Puller Attachment

143528400
3160S95-63-053-1: RNCC: 3 | RNVC: 2
GPLV87-34: RNCC: 5 | RNVC: 2
85-689-8107: RNCC: 6 | RNVC: 9

14 Nov 1978

5120-14-326-8189
Axe Piston Chasse

143268189
010-135-000: RNCC: 3 | RNVC: 2
10-135-000: RNCC: 5 | RNVC: 2

2 Jul 1975

5120-14-237-5434
Cle Speciale

142375434
M15-006: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-418-7391
Socket Wrench Adapter

144187391
620-024-160-0: RNCC: 3 | RNVC: 2

14 Sep 1987

5120-14-256-1524
Craftsman's Tweezers

142561524
NO PRIMARY REF14-256-1524: RNCC: 3 | RNVC: 2
6D: RNCC: 5 | RNVC: 2
748-6: RNCC: 5 | RNVC: 9

1 Jan 1969

5120-14-319-4284
Drift

143194284
0M00137-5: RNCC: 3 | RNVC: 2
85-686-0697: RNCC: 6 | RNVC: 9

1 Jan 1975

5120-14-200-9332
Socket Wrench Socket

142009332
S.15/16: RNCC: 3 | RNVC: 2
3148510545400: RNCC: 5 | RNVC: 2
S15-16: RNCC: 5 | RNVC: 2
S15.16: RNCC: 5 | RNVC: 2
0054540: RNCC: 5 | RNVC: 9

1 Jan 1962

5120-14-228-5136

5120-14-228-5212

5120-14-556-8727
Hand Armament Subsystem Carrier

145568727
498950: RNCC: 3 | RNVC: 2

17 Apr 2008

5120-14-223-8237

5120-14-417-7612
Dessai Outillage

144177612
NO PRIMARY REF14-417-7612: RNCC: 3 | RNVC: 2
BL51054: RNCC: 5 | RNVC: 9

22 Jul 1987

5120-14-316-9169
Mechanical Puller Adapter

143169169
U.51B5-11: RNCC: 3 | RNVC: 2
0762020: RNCC: 5 | RNVC: 2
EMB0UTU51-39: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-283-1689
Cle Speciale

142831689
761-3M735P23: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-377-2443
Outill Reglag Frein

143772443
341A93-3211-00: RNCC: 3 | RNVC: 2

17 May 1982

5120-14-490-6913
Chisel

144906913
241 C 01083 010: RNCC: 3 | RNVC: 2
F300 0T 000 1042: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-253-9761
Fausse Fusee Roue D

142539761
C46289: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-391-7052
Servo-Commande Cle

143917052
MHN260-46: RNCC: 3 | RNVC: 2
MHN260-46: RNCC: 5 | RNVC: 2

21 Mar 1984

5120-14-274-7932
Adjustable Wrench

142747932
IR2-250: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-385-3129
Mechanical Puller Attachment

143853129
360A93-3231-25: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-201-2192
Socket Wrench Extension

142012192
K215: RNCC: 3 | RNVC: 2
99-250-31-215-4: RNCC: 5 | RNVC: 2
99250312154: RNCC: 5 | RNVC: 2
3272670269767: RNCC: 5 | RNVC: 2
C-215: RNCC: 5 | RNVC: 2
C215: RNCC: 5 | RNVC: 2
C215: RNCC: 5 | RNVC: 2
145J206: RNCC: 5 | RNVC: 9
78C215: RNCC: 5 | RNVC: 9

1 Jan 1962

5120-14-237-9469
Socket Head Screw Key

142379469
5584-1-26: RNCC: 3 | RNVC: 9
MUL5584-1-26: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-476-9330
Socket Head Screw Key

144769330
NO PRIMARY REF14-476-9330: RNCC: 3 | RNVC: 2
18509475-2: RNCC: 5 | RNVC: 2
0125651: RNCC: 5 | RNVC: 2
84HT.6: RNCC: 5 | RNVC: 2

12 Jul 1995

5120-14-444-8962
Flat Tip Screwdriver

144448962
ETF-6: RNCC: 3 | RNVC: 2
ETF6: RNCC: 3 | RNVC: 2
0242633D00: RNCC: 5 | RNVC: 2
3272670224780: RNCC: 5 | RNVC: 2

28 Jan 1991

5120-14-559-4738
Torque Wrench

145594738
J.208-50: RNCC: 3 | RNVC: 2

15 Jan 2009

5120-14-386-4372

5120-14-291-8141

5120-14-345-9151

5120-14-393-8453
Equil Dynam Mandrin

143938453
8002204400: RNCC: 3 | RNVC: 2
8000530000: RNCC: 5 | RNVC: 2

23 Jun 1984

5120-14-334-0148

5120-14-212-9136
Cle Speciale

142129136
9970-115-199: RNCC: 3 | RNVC: 2
9970-115-199-00: RNCC: 5 | RNVC: 2

1 Jan 1964

5120-14-379-4869
Spanner Wrench

143794869
605-01-10A: RNCC: 3 | RNVC: 2
85-692-2570: RNCC: 6 | RNVC: 9

1 Oct 1982

5120-14-496-8220
Cle

144968220
B03-4208: RNCC: 3 | RNVC: 2
F300 0T 022 1595: RNCC: 6 | RNVC: 9

15 Oct 1997

5120-14-360-6720
Poincon Pour Bille

143606720
000365044: RNCC: 3 | RNVC: 9

19 Dec 1979

5120-14-344-8768
Hand Material Handling Hook

143448768
K0PALC: RNCC: 3 | RNVC: 2

9 Sep 1977

5120-14-385-5760
Mechanical Puller Attachment

143855760
130634: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-373-4544
Spanner Wrench

143734544
DLP751070: RNCC: 3 | RNVC: 2

21 Oct 1981

5120-14-485-9543
Electrical Contact Remover

144859543
D23.08.011: RNCC: 3 | RNVC: 2

26 Feb 1997

5120-14-201-2302
Cross Tip Screwdriver

142012302
AP.4X200: RNCC: 3 | RNVC: 2
0168840G00: RNCC: 5 | RNVC: 2
233P4: RNCC: 5 | RNVC: 2
91381488: RNCC: 5 | RNVC: 2
3148510088808: RNCC: 5 | RNVC: 2
0008880: RNCC: 5 | RNVC: 9
AP.4: RNCC: 5 | RNVC: 9
AP4: RNCC: 5 | RNVC: 9

1 Jan 1962

5120-14-236-2624

5120-14-562-9136
Flat Tip Screwdriver

145629136
CLOUTA05: RNCC: 3 | RNVC: 2

3 Dec 2009

5120-14-486-5515
Spanner Wrench

144865515
90038M16-06P11: RNCC: 3 | RNVC: 2
0190038M16-06P11: RNCC: 5 | RNVC: 2

21 Mar 1997

5120-14-343-6366
Face Spanner Wrench Socket

143436366
330A93-2001-20: RNCC: 3 | RNVC: 2

16 Jun 1977

5120-14-443-6336
Bouton Molete

144436336
NO PRIMARY REF14-443-6336: RNCC: 3 | RNVC: 2
OU135698: RNCC: 5 | RNVC: 9

30 Nov 1990

5120-14-569-0317
Mechanical Puller

145690317
F27359000-1: RNCC: 3 | RNVC: 2
F27359000: RNCC: 3 | RNVC: 9
F27359000: RNCC: 5 | RNVC: 9

1 Aug 2011

5120-14-393-0308
Open End Wrench

143930308
10-8X10-P: RNCC: 3 | RNVC: 2
3272670229709: RNCC: 5 | RNVC: 2
10-8X10P: RNCC: 5 | RNVC: 2
10-8X10CP: RNCC: 5 | RNVC: 9

12 Apr 1984

5120-14-463-3727
Pin Inserter And Remover

144633727
65-4-02-44LT00-554726C: RNCC: 3 | RNVC: 2
0416250X00: RNCC: 5 | RNVC: 2
89471282: RNCC: 5 | RNVC: 2

9 Jun 1993

5120-14-368-0745
Flat Tip Screwdriver

143680745
0003942: RNCC: 3 | RNVC: 2
AGN6,5X200: RNCC: 5 | RNVC: 2
ACH.6,5X200: RNCC: 5 | RNVC: 2
AGN6-5X200: RNCC: 5 | RNVC: 2

19 Jan 1981

5120-14-241-3014
Splicing Sleeve Compressing Tool

142413014
410033-00: RNCC: 3 | RNVC: 2
410033-00: RNCC: 5 | RNVC: 2
HELAVIAKG410-033: RNCC: 5 | RNVC: 2
KG: RNCC: 5 | RNVC: 2
0056634S00: RNCC: 5 | RNVC: 2
91357805: RNCC: 5 | RNVC: 2
410-033: RNCC: 5 | RNVC: 2
PINCEAMANCH0NNERTYPEKG: RNCC: 5 | RNVC: 2
410033: RNCC: 5 | RNVC: 2
G: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-385-9827
Spanner Wrench

143859827
0.411/60150: RNCC: 3 | RNVC: 2
0411-60150: RNCC: 5 | RNVC: 2

24 Aug 1983

5120-14-406-6579
Montage Guide

144066579
853-200-861-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-452-5232
Daxe Extracteur

144525232
F46677: RNCC: 3 | RNVC: 2

8 Jan 1992

5120-14-567-3823
Open End Wrench

145673823
62024214AA: RNCC: 3 | RNVC: 2

9 Mar 2011

5120-14-217-5086

5120-14-425-9246
Mandrin Emmanchemen

144259246
600100: RNCC: 3 | RNVC: 2

28 Jul 1988

5120-14-228-5190

5120-14-269-4336
Saddler's Sewing Awl

142694336
ALENEC0URBEL0NGFER85: RNCC: 2 | RNVC: 2
NO PRIMARY REF14-269-4336: RNCC: 3 | RNVC: 2
ALENEC0URBEL0NGFER85: RNCC: 5 | RNVC: 9

1 Jan 1970

5120-14-392-0514
Essai Support

143920514
MFG374-21: RNCC: 3 | RNVC: 2

21 Mar 1984

5120-14-416-7507
Mandrin Press

144167507
537270: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-484-3078
Face Spanner Wrench Socket

144843078
OU146232: RNCC: 3 | RNVC: 2
OU146232: RNCC: 5 | RNVC: 2
OU146232: RNCC: 5 | RNVC: 9
F300 0T 020 6645: RNCC: 6 | RNVC: 9

7 Nov 1996

5120-14-542-6709
Hand Molder's Rammer

145426709
1691-20REP12: RNCC: 3 | RNVC: 2

27 Jul 2004

5120-14-295-2041
Bearing And Bushing Inserter

142952041
174802: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-216-7224

5120-14-444-3510

5120-14-452-0305
De Sertissa Poincon

144520305
PRV7300-02: RNCC: 3 | RNVC: 2

18 Dec 1991

5120-14-393-0275
Combination Box And Open End Wrench

143930275
41.14: RNCC: 3 | RNVC: 2
41-14: RNCC: 5 | RNVC: 2
0184647F00: RNCC: 5 | RNVC: 2
91564511: RNCC: 5 | RNVC: 2
3148511013618: RNCC: 5 | RNVC: 2
0101361: RNCC: 5 | RNVC: 9

12 Apr 1984

5120-14-438-3505
Spanner Wrench

144383505
330A98-7528-00: RNCC: 3 | RNVC: 2

14 Mar 1990

5120-14-325-4065
Cle Speciale

143254065
7692-7263: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-454-9488
Flat Tip Screwdriver

144549488
AEF.2,5X35: RNCC: 3 | RNVC: 2
3148510048901: RNCC: 5 | RNVC: 2
104-3929: RNCC: 5 | RNVC: 2
AEF.2,5X35: RNCC: 5 | RNVC: 2
FACOMAEF.2,5X35: RNCC: 5 | RNVC: 9
004890: RNCC: 5 | RNVC: 9

29 Apr 1992

5120-14-438-6252
Hand Lead Seal Press

144386252
851-115-026-0: RNCC: 3 | RNVC: 2

28 Mar 1990

5120-14-395-6881
Socket Wrench Socket

143956881
853-100-118-0: RNCC: 3 | RNVC: 2

30 Oct 1984

5120-14-402-8794
Obturatr Interieur

144028794
NO PRIMARY REF14-402-8794: RNCC: 3 | RNVC: 2
20C3347: RNCC: 5 | RNVC: 9

19 Jul 1985

5120-14-320-9471

5120-14-285-6233

Load More Results