What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.

A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Blacksmith's Punch?

A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Mechanical Finger?

A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.

A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Screwdriver And Wrench Assembly?

A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Stakeholder Bench Plate?

A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.

What is a Drill Drift?

A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.

A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Digging Bar?

A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

What is a Valve Spring Lifter?

A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.

What is a Fuse Puller?

A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.

Hand Tools, Nonedged, Nonpowered - France (FR)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by France (FR) - NCB is 14

Page 29 of 110

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by France

51	20	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - France (FR)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 16 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Pipe Vise? 19 Items: A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.
What is a Hand Vise? 25 Items: A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.
What is a Hand Hydraulic Jack? 133 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 153 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 903 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 17 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
Swage,Bottom,Blacksmith's 10 Items
What is a Hand Tube Flaring Tool? 23 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Blacksmith's Punch? 12 Items: A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.
What is a Drain Plug Wrench? 45 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 57 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 16 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 3829 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
Flatter,Blacksmith's 18 Items
Swage,Top,Blacksmith's 12 Items
What is a Pipe Wrench? 110 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 149 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 53 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
Screwdriver,Offset 54 Items
What is a Screwdriver Bit? 707 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Mechanical Finger? 25 Items: A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.
What is a Socket Wrench Socket? 1803 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 1412 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 1641 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 52 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 565 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
Jack,Push-Pull,Screw 30 Items
What is a Hand Tube Bender? 54 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 1106 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 55 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pinch Bar? 19 Items: A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.
What is a Pry Bar? 17 Items: A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.
What is a Wrecking Bar? 15 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 273 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 413 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 32 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 295 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
Face,Hammer,Inserted 25 Items
What is a Hole Sheet Metal Holder? 37 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Screwdriver And Wrench Assembly? 11 Items: A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.
What is a Hand Rivet Set? 121 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Stakeholder Bench Plate? 22 Items: A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.
What is a Drill Drift? 32 Items: A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.
What is a Tack Claw? 15 Items: A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.
Mattock 28 Items
What is a Socket Wrench Handle Bar? 108 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Stake,Sheet Metalworking 50 Items
Riveter,Blind,Hand 76 Items
What is a Hand Shovel? 43 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 98 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 30 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
What is a Digging Bar? 20 Items: A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.
Block,Dolly,Sheet Metalworking 56 Items
What is a Piston Ring Compressor? 34 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Valve Spring Lifter? 29 Items: A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.
What is a Fuse Puller? 20 Items: A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.
What is a Hand Lead Seal Press? 18 Items: A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.
What is a Hand Beading Tool? 91 Items: A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.
What is a Hand Hammer? 502 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
Head,Hand Hammer 81 Items
What is a Lamp Extractor? 76 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Tube Packing Ring Installing Tool? 29 Items: A Tube Packing Ring Installing Tool (INSTALLING TOOL,TUBE PACKING RING) is an item designed to insert packing rings on tubes within tube sheets on condensers and similar heat exchangers. In operation, the packing rings are assembled on the loading pin mandrel and are then transferred from the mandrel on to the tube by means of a tubular sleeve which slides on the mandrel.
What is a Carpenters' Pincers? 18 Items: A Carpenters' Pincers (PINCERS,CARPENTERS') is a plierlike hand tool having two opposing jaws which may have hammerlike backs. One handle has a nail or tack pulling claw, the other is shaped to form a screwdriver. The tool may contain a wire cutter. See also NIPPERS, END CUTTING and PINCERS, FARRIERS'.
What is a Trowel? 33 Items: A Trowel is a tool used for bricklaying, concrete work, plastering, linoleum laying, and masonry work. Excludes CORNER TOOL, CONCRETE.
What is a Hand Abrasive Wheel Dresser? 12 Items: A Hand Abrasive Wheel Dresser (DRESSER,ABRASIVE WHEEL,HAND) is a tool designed to remove glaze from, dress, shape, sharpen, and true solid abrasive wheels. Excludes NIB, DIAMOND, WHEEL DRESSING.
What is a Lamp Cap Extractor? 32 Items: A Lamp Cap Extractor (EXTRACTOR,LAMP CAP) is a tool specifically designed to facilitate the removal of lamp caps from switchboards, panels or indicator lamps.
What is a Rivet Bucking Bar? 51 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 86 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 277 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Woven Cable Grip? 23 Items: A Woven Cable Grip (GRIP,CABLE,WOVEN) is a braided wire device designed to clutch a bare or insulated conductor, cable or wire rope, for holding taut or drawing through conduit.
What is a Screw Thread Insert Extractor? 19 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is an Electron Tube Extractor? 18 Items: An Electron Tube Extractor (EXTRACTOR,ELECTRON TUBE) is a hand tool designed to facilitate the removal of electron tubes from electronic equipment and to avoid burning the fingers. It may be used for installing tubes.
What is a Cross Tip Screwdriver? 362 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 21 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 11 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 37 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Tool Handle Wedge? 10 Items: A Tool Handle Wedge (WEDGE,TOOL HANDLE) is excludes WEDGE, WOOD.
What is a Marlinespike? 16 Items: A Marlinespike is a metal hand tool made in the shape of a tapered pin. One end is pointed and the opposite end may be headed. The body may contain an eye for a lanyard sling, or be grooved lengthwise. Excludes CABLE PICK and FID.
What is an Aligning Punch? 272 Items: An Aligning Punch (PUNCH,ALIGNING) is a round, square, hexagonal or octagonal bodied hand tool, having a round tapered section 6-1/2 inches (165.1 mm) or more in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, DRIFT and DRIFTPIN.
What is a Drift Punch? 25 Items: A Drift Punch (PUNCH,DRIFT) is a round, square, hexagonal, or octagonal bodied hand tool, having a round tapered section 4 to 6 inches (101.6 mm to 152.4 mm) inclusive in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, ALIGNING; and DRIFTPIN.
What is a Putty Knife? 36 Items: A Putty Knife (KNIFE,PUTTY) is a hand tool with a nonedged blade fixed to a handle for laying on and smoothing putty and the like.
What is a Socket Wrench Adapter-Extension? 40 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 30 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 184 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Socket Wrench Ratchet Attachment? 47 Items: A Socket Wrench Ratchet Attachment (RATCHET ATTACHMENT,SOCKET WRENCH) is a connection for socket wrenches and handles. Consists of a ratcheting mechanism with an internal drive on one end and an external drive on the opposite end of the same size. The item is designed to permit continuous rotation of the socket in one direction without removing the socket or handle and without a complete rotation of the handle.
What is a Wrench Extension Handle? 81 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Socket Wrench Crowfoot Attachment? 155 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 33 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 43 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 48 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 2394 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 372 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 300 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 661 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 32 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand-Operated Grommet And Eyelet Press? 12 Items: A Hand-Operated Grommet And Eyelet Press (PRESS,GROMMET AND EYELET,HAND-OPERATED) is a device which punches or pierces holes and in addition fastens or sets eyelets and grommets in cloth, paper and similar material. May be used for fastening or setting rivets, lacing hooks and snaps in cloth, paper and similar material. It is hand operated by lever or screw action. See also PUNCH, EYELET, PLIER TYPE and PRESS, GROMMET AND EYELET, FOOT OPERATED.
What is a Claw Bar? 19 Items: A Claw Bar (BAR,CLAW) is before using, refer to Reference Drawing Group AG.
What is a Shock Type Wheel Stud Nut Wrench? 11 Items: A Shock Type Wheel Stud Nut Wrench (WRENCH,WHEEL STUD NUT,SHOCK TYPE) is a manually operated item designed to remove wheel stud nuts. In operation the inner nut is turned by a socket attached to a shaft on which is a loose swinging weighted handle. The weighted handle may be swung quickly to provide an impact force against the socket to loosen the seized or jammed nuts. The outer nut is held stationary by a separate hexagonal holding wrench.
What is a Drift Pin Set? 30 Items: A Drift Pin Set is a group of DRIFTPIN having different characteristics.
What is a Tire Iron? 25 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 115 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Blacksmith's Vise? 14 Items: A Blacksmith's Vise (VISE,BLACKSMITH'S) is a clamping device consisting of a mounting plate, one stationary and one manual screw actuated jaw and a supporting member extending downward from the stationary jaw to the floor. Designed to be mounted on a bench, table or the like. May include pipe holding jaws.
What is a Machinist's Vise? 64 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Clamp Base Bench Vise? 10 Items: A Clamp Base Bench Vise (VISE,BENCH,CLAMP BASE) is a clamping device consisting of a base, one stationary and one manual screw actuated jaw, and one or more guide bars or rods. Designed with an integral clamp for attaching to a bench, table, or the like. Does not include pipe holding jaws.
What is a Fixed Open End Wrench Set? 86 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Nail Set? 11 Items: A Nail Set is a round knurled, square, hexagonal or octagonal bodied hand tool having a round tapered section terminating in a cupped point. It is designed to set brad head nails below the surface by striking it a hammerlike blow. See also PUNCH, DRIVE PIN.
What is a Socket Wrench Set? 202 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is an Open End Box Wrench Set? 10 Items: An Open End Box Wrench Set (WRENCH SET,OPEN END BOX) is a group of WRENCH, OPEN END BOX having different characteristics.
What is a Combination Box And Open End Wrench Set? 72 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Box Wrench Set? 36 Items: A Box Wrench Set (WRENCH SET,BOX) is a group of box wrenches having different characteristics. It may include a HANDLE, EXTENSION WRENCH. See also WRENCH SET, COMBINATION, BOX AND OPEN END.
What is a Hot Line Stick? 26 Items: A Hot Line Stick is a hand tool consisting of a straight, round stick (pole) made of a suitable nonconductive material with a tool fixed to one end. The other end may be plain or have a butt mounting device fixed to it. Various types of attachments (hooks, rings, and bands) may be fixed to the body. It is designed for use in the repair and maintenance of live high voltage aerial lines. Excludes hot line sticks without heads.
Handle,Mattock-Pick 15 Items
What is a Wrench Kit? 73 Items: A Wrench Kit is an assortment of various types and sizes of wrenches such as SOCKET, SOCKET WRENCH; WRENCH, OPEN END, FIXED; WRENCH, BOX and the like. It may include adapter(s), ratchet(s) and the like. See also WRENCH SET (as modified.
What is a Brad Awl? 15 Items: A Brad Awl (AWL,BRAD) is a small, pointed tool used by shoemakers, saddlers, cabinetmakers, and the like for piercing small holes in wood, leather, and similar materials, and consists of a handle with a ferrule and a blade. The blade is round, terminating in a beveled, sharp straight edge and has a shank which passes through the center of the handle.
What is a Scratch Awl? 20 Items: A Scratch Awl (AWL,SCRATCH) is an item whose nominal length of blade is less than 4 inches (101.6 millimeters) and is provided with a nondetachable handle.
What is a Screw Extractor Set? 10 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 102 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
Jack,Scissors,Hand 26 Items
What is a Piston Ring Expander? 23 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
Mallet,Plastic 62 Items
Mallet,Rubber 10 Items
What is a Wood Mallet? 37 Items: A Wood Mallet (MALLET,WOOD) is excludes MALLET, CALKING; MALLET, HAWSING and MALLET, SERVING.
What is a Rack Bar Jack? 30 Items: A Rack Bar Jack (JACK,RACK BAR) is excludes JACK, BUMPER and JACK, REEL, HAND.
What is a Pneumatic Tire Valve Core Inserter And Remover? 14 Items: A Pneumatic Tire Valve Core Inserter And Remover (INSERTER AND REMOVER,PNEUMATIC TIRE VALVE CORE) is a bar of steel having a small cylindrical slotted end for removing or installing a valve core in a valve stem by a screwing motion. See also REPAIR TOOL, PNEUMATIC TIRE VALVE.
What is a Hand Tube Swaging Tool Kit? 20 Items: A Hand Tube Swaging Tool Kit (SWAGING TOOL KIT,TUBE,HAND) is a hand-operated noncutting tool consisting of one or more PUNCH, TUBE SWAGING, HAND and a tube flaring bar.
What is a Hand Tube Flaring Punch? 11 Items: A Hand Tube Flaring Punch (PUNCH,TUBE FLARING,HAND) is a noncutting tool having a shaped end or section designed to flare the ends of tubes. One type is designed to flare the ends of tubes against a tube sheet, and another to flare tube ends to mate with tube fittings. Includes punch components of FLARING TOOL, TUBE, HAND.
What is a Hose Strap Band Clamping Tool? 26 Items: A Hose Strap Band Clamping Tool (CLAMPING TOOL,STRAP BAND,HOSE) is an item designed to tension and lock metal straps around a rubber hose, and the like. It is also used to clamp and hold fittings therein.
What is a Mechanical Puller? 3073 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 470 Items
What is a Slip Joint Pliers? 84 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Brake Repair Pliers? 14 Items: A Brake Repair Pliers (PLIERS,BRAKE REPAIR) is a tool having jaws designed for use in brake repair operations, such as removing and replacing items such as keys, springs, and the like. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 226 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 12 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 81 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 56 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 15 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 11 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 29 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Cross Tip Screwdriver Set? 14 Items: A Cross Tip Screwdriver Set (SCREWDRIVER SET,CROSS TIP) is a group of SCREWDRIVER, CROSS TIP having different characteristics.
What is a Spanner Wrench Set? 18 Items: A Spanner Wrench Set (WRENCH SET,SPANNER) is a group of items under WRENCH, SPANNER having different characteristics.
What is a Drive Pin Punch Set? 31 Items: A Drive Pin Punch Set (PUNCH SET,DRIVE PIN) is a group of PUNCH, DRIVE PIN having different characteristics.
What is an Aligning Punch Set? 13 Items: An Aligning Punch Set (PUNCH SET,ALIGNING) is a group of PUNCH, ALIGNING having different characteristics. See also DRIFTPIN SET.
What is a Slugging Type Box Wrench Socket? 16 Items: A Slugging Type Box Wrench Socket (SOCKET,SLUGGING TYPE BOX WRENCH) is an item having a hexagonal external drive at one end, made to fit into the internal hexagonal or 12-point opening of a slugging type box wrench. The opposite end has a single-broached hexagonal opening of the same size as the external drive. The item is designed with extra thick walls to withstand the impact of sledge blows on the driving wrench.
What is a Mechanical Puller Step Plate? 44 Items: A Mechanical Puller Step Plate (STEP PLATE,MECHANICAL PULLER) is a circular disk, flanged to provide a shoulder, and designed to provide a base for the screw point of a PULLER, MECHANICAL when pulling externally mounted bearings, gears, and the like from hollow shafts or housings. It has a concentric, countersunk hole to accommodate the puller screw point.
What is a Solid Center Punch? 79 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Cable Type Ratchet Lever Puller? 20 Items: A Cable Type Ratchet Lever Puller (PULLER,RATCHET LEVER,CABLE TYPE) is an item consisting of a metal frame and ratchet lever reel to which is attached one end of a flexible cable (wire rope). The cable feeds through the fast eye in the metal frame, and may be reeved through a slip hook tackle hook. See also BINDER, LOAD; HOIST, WIRE ROPE and STRETCHER, WIRE.
What is an Electronic Equipment Tuning Wand? 18 Items: An Electronic Equipment Tuning Wand (TUNING WAND,ELECTRONIC EQUIPMENT) is a hand-held rod used in determining the adjustment of the windings of a radio frequency coil. It is made of insulating material with iron on one end and brass on the other end. By inserting the iron end in the coil, the inductance is increased and by inserting the brass end, the inductance is decreased.
What is a Combination Open End And Spanner Wrench? 14 Items: A Combination Open End And Spanner Wrench (WRENCH,OPEN END AND SPANNER,COMBINATION) is a tool having open end wrench characteristics at one end and spanner wrench features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s) at the other end.
What is a Detent Handling Tool? 187 Items: A Detent Handling Tool (HANDLING TOOL,DETENT) is a specially designed handling tool consisting of a rigid bar with a T-handle on one end. The other end is equipped with threads designed to mate the threads of a detent to facilitate inserting or extracting.
What is a Hand Material Handling Hook? 23 Items: A Hand Material Handling Hook (HOOK,MATERIAL HANDLING,HAND) is a hook whose curved end conforms to Style AP1, AP2, AP3 or AP4 of Reference Drawing Group AP. Excludes HOOK, MANHOLE COVER, HAND; HOOK, WIRE BREAKING, HAND; HOOK, ROCK CRUSHER FEEDING, HAND; HOOK, STRAINER REMOVING, HAND and HOOKS, BAG HANDLING, HAND.
What is a Magnetic Retrieving Tool? 11 Items: A Magnetic Retrieving Tool (RETRIEVING TOOL,MAGNETIC) is a hand-operated magnetic device used to locate and pick up metallic articles, such as bolts, nuts, pins, washers, and the like, in confined spaces. It may be rigid, flexible or adjustable. Excludes FINGER, MECHANICAL.
What is a Mechanical Puller Adapter? 78 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Combination Box And Open End Box Wrench? 13 Items: A Combination Box And Open End Box Wrench (WRENCH,BOX AND OPEN END BOX,COMBINATION) is a double end wrench, box and open end box, primarily designed for removing or replacing tube fittings. The opening in the open end box may be machined at an angle from the longitudinal center line of the wrench.
What is a Screw Thread Insert Inserter? 136 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Flat Tip Screwdriver Set? 48 Items: A Flat Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP) is a group of SCREWDRIVER, FLAT TIP having different characteristics.
What is a Terminal Crimping Tool Contact Positioner? 89 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 16 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is an Adjustable Wrench? 138 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 239 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 75 Items
Handle,Shovel 10 Items
What is a Socket Wrench Spanner Attachment? 88 Items: A Socket Wrench Spanner Attachment (SPANNER ATTACHMENT,SOCKET WRENCH) is an item having an adjustable or fixed span with pin, hook, or key type end that is used to fit and turn various size retaining rings, cover plates, plugs, couplings, and like parts. Usually designed to be driven by a male driver.
What is a Retaining Ring Installation Tool? 44 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Tacker? 16 Items: A Tacker is a hand-operated, hammerlike or gunlike item without a clincher, used to drive preformed connecting elements like pins, nails or staples through one object or piece of material into another. Excludes STAPLER (as modified).
What is a Bearing And Bushing Inserter? 290 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 207 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 939 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 14 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 93 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 161 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 94 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 141 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 53 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Six Point Tip Screwdriver? 155 Items: A Six Point Tip Screwdriver (SCREWDRIVER,SIX POINT TIP) is a manual screwdriver having a single nonremoveable blade having a tip with six rounded points.
What is a Seal Inserter And Remover? 147 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 478 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is a Preformed Packing Inserter And Remover? 34 Items: A Preformed Packing Inserter And Remover (INSERTER AND REMOVER,PREFORMED PACKING) is a hand tool designed to install and remove a PACKING, PREFORMED.
What is a Pin Remover? 34 Items: A Pin Remover (REMOVER,PIN) is a hand tool designed to facilitate the removal of a pin from a hole.
What is a Pin Inserter And Remover? 13 Items: A Pin Inserter And Remover (INSERTER AND REMOVER,PIN) is a rodlike tool designed to facilitate the insertion and removal of a pin from a hole.
What is an Electrical Contact Inserter And Remover? 37 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Piston Inserter? 40 Items: A Piston Inserter (INSERTER,PISTON) is a tool designed to permit installation of a piston or piston assembly without damaging the packings or piston.
What is a Spring Inserter And Remover? 85 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 13 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Stud Inserter? 22 Items: A Stud Inserter (INSERTER,STUD) is a device designed to drive in studs. It does not have any facilities for removing or extracting studs. See also INSERTER AND REMOVER, STUD.
What is a Stud Inserter And Remover? 17 Items: A Stud Inserter And Remover (INSERTER AND REMOVER,STUD) is a group of items designed to extract and to drive studs. It may include collets, guides, housings, holders and the like. See also REMOVER SET, STUD and INSERTER, STUD.
What is a Gear Inserter? 54 Items: A Gear Inserter (INSERTER,GEAR) is a hand tool designed to install various gears onto a gearshaft. It may be operated by a pushing or a striking force.
What is a Crimping Tool Die? 73 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is an Electrical Connector Inserter? 45 Items: An Electrical Connector Inserter (INSERTER,ELECTRICAL CONNECTOR) is a hand tool designed to hold an electrical connector, and to assist in the positioning and installation of the connector on a cover, panel or the like.
What is a Float? 12 Items: A Float is a tool used for concrete, plastering and grouting work.
What is a Mechanical Puller Set? 19 Items: A Mechanical Puller Set (PULLER SET,MECHANICAL) is two or more separate PULLER, MECHANICAL of different fixed sizes.
What is a Lifting Pneumatic Bag? 11 Items: A Lifting Pneumatic Bag (PNEUMATIC BAG,LIFTING) is a device made of flexible material designed to lift another item by being placed under the item and being inflated with air or some other gas. It will have a means of being connected to an air or gas source and may include a connector hose, a control valve and/or a pressure regulator.
What is a Cable Tie Installation Tool? 22 Items: A Cable Tie Installation Tool (INSTALLATION TOOL,CABLE TIE) is a lightweight, hand-held, hand-operated tool designed to fasten cable ties, straps and the like. Cable tie is inserted into the nose of the tool flush to the cable tie head. Trigger handle tightens cable tie and cuts off any excess. These installation tools are available in a variety of sizes depending on their intended use with miniature, intermediate, standard, heavy or extra heavy cross section ties.
What is a Bearing Staking Installation Tool? 159 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
Wrench Set,Ratchet 15 Items
What is a Sealant Dispenser? 26 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Retaining Ring Pliers Set? 10 Items: A Retaining Ring Pliers Set (PLIERS SET,RETAINING RING) is a group of PLIERS, RETAINING RING having different characteristics.
What is a Hand Armament Subsystem Carrier? 52 Items: A Hand Armament Subsystem Carrier (CARRIER,ARMAMENT SUBSYSTEM,HAND) is a metallic item with a clamp device and/or space for depositing articles. It is used for transporting weapon parts during maintanence and/or repair work, such as gun barrel, automatic loader, breechblock and the like.
What is a Ring Retaining Pliers Tip Set? 13 Items: A Ring Retaining Pliers Tip Set (TIP SET,PLIERS,RING RETAINING) is a collection of removable metallic tips in matched pairs used to provide various size capablities to PLIERS, RING RETAINING which permits the removal and installation of internal and external retaining rings.
What is a Plug Electrical Connector Extractor? 45 Items: A Plug Electrical Connector Extractor (EXTRACTOR,ELECTRICAL CONNECTOR,PLUG) is a hand tool designed to disassemble CONNECTOR, PLUG, ELECTRICAL from a CONNECTOR, RECEPTACLE, ELECTRICAL.
What is a Torque Wrench Adapter Set? 10 Items: A Torque Wrench Adapter Set (ADAPTER SET,TORQUE WRENCH) is tWO or more ADAPTER, TORQUE WRENCH of different sizes.
What is an Electronic Component Inserter And Remover? 79 Items: An Electronic Component Inserter And Remover (INSERTER AND REMOVER,ELECTRONIC COMPONENT) is an item which can insert or remove an electronic component package such as MICROCIRCUIT; RESISTOR, NETWORK (as modified); and the like from its mounting position or socket. Excludes INSERTER AND REMOVER, ELECTRICAL CONTACT; REMOVER, ELECTRICAL CONTACT; EXTRACTOR, ELECTRICAL CARD; EXTRACTOR, ELECTRONIC CRYSTAL UNIT; EXTRACTOR, ELECTRON TUBE.
What is an Impact Type Bit Set And Handle Screwdriver? 14 Items: An Impact Type Bit Set And Handle Screwdriver (SCREWDRIVER,BIT SET AND HANDLE,IMPACT TYPE) is an item consisting of a set of screwdriver bits and a impact driver to accommodate the bits of various types and characteristics. It is designed to transmit a strong rotating movement by the impact of a hammer blowed on the impact driver. It is used to loosen rusted or seized screws. Excludes SCREWDRIVER, BIT SET AND HANDLE.
What is a Hand Vise Jaw? 19 Items: A Hand Vise Jaw (JAW,VISE,HAND) is an item consisting of two opposing parts of a VISE, HAND. The item is moveable and able to open and close. It can hold, grasp or clamp work.
What is a Screwdriver Handle? 28 Items: A Screwdriver Handle (HANDLE,SCREWDRIVER) is an item used to accommodate various types of BIT, SCREWDRIVER. It is designed to rotate a bit that is used for installing or removing screws.
What is a Wire Twister Pliers? 25 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 284 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is a Mechanical Puller Body? 45 Items: A Mechanical Puller Body (BODY,PULLER,MECHANICAL) is an item designed to support and enclose the internal parts of a PULLER,MECHANICAL.
What is a Flat Tip And Cross Tip Screwdriver Set? 39 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is a Socket Wrench Screwdriver Attachment Set? 22 Items: A Socket Wrench Screwdriver Attachment Set (SCREWDRIVER ATTACHMENT SET,SOCKET WRENCH) is a set of screwdriver attachment, socket wrench of different sizes. Items consist of a female square drive on one end to attach to a handle, socket wrench and various screwdriver tip configurations on the opposite end. Excludes SCREWDRIVER ATTACHMENT,SOCKET WRENCH
What is an Oil Filter Wrench? 44 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 430 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Communications Equipment Spring Adjuster? 13 Items: A Communications Equipment Spring Adjuster (ADJUSTER,SPRING,COMMUNICATIONS EQUIPMENT) is a single or double end tool, equipped with slot(s) of various dimensions or with cylindrical rod(s), used for adjusting the springs or spring tensioned parts of electronic equipment.
What is a Rotating Members Aligning Tool? 32 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
What is a Final Drive Assembly Alignment Pin? 41 Items: A Final Drive Assembly Alignment Pin (ALIGNMENT PIN,FINAL DRIVE ASSEMBLY) is a special designed pin used in the assembling of the final drive.
Arm,Handling Tool 77 Items
What is a Splicing Sleeve Compressing Tool? 23 Items: A Splicing Sleeve Compressing Tool (COMPRESSING TOOL,SPLICING SLEEVE) is a hand tool having hinged leverage handles similar to a CUTTER, BOLT or pliers, designed to compress a splicing sleeve when joining the ends of two conductors, or when forming an eye splice in the end of a wire rope. Excludes CRIMPING TOOL, TERMINAL, HAND.
What is a Hand Screw Jack Extension? 14 Items: A Hand Screw Jack Extension (EXTENSION,HAND SCREW JACK) is a length of externally threaded rigid shafting which is the adjustable section of a JACK, SCREW, HAND.
What is a Mechanical Puller Gear Adapter? 21 Items: A Mechanical Puller Gear Adapter (GEAR ADAPTER,PULLER,MECHANICAL) is an adapter that adapts a PULLER,MECHANICAL, to pull a certain gear.
Handle,Hydraulic Jack 18 Items
What is a Female Electrical Contact Resizing Tool? 11 Items: A Female Electrical Contact Resizing Tool (RESIZING TOOL,FEMALE ELECTRICAL CONTACT) is a tool designed to shape to a specific size, female contacts such as those used on electrical connectors, tube sockets, crystal sockets, and pin jacks.
What is a Screwdriver And Socket Wrench Combination? 13 Items: A Screwdriver And Socket Wrench Combination is a hand-tool formed into an integral unit with a socket wrench at one end and a screwdriver bit at the other end. See also SCREWDRIVER AND WRENCH ASSEMBLY.
What is a Hand Hose Fitting Swaging Tool Kit? 11 Items: A Hand Hose Fitting Swaging Tool Kit (SWAGING TOOL KIT,HOSE FITTING,HAND) is a device, hydraulically actuated by hand or power operated pump, consisting of face plate, adapter plate, finger cages, fingers, ram, bushing, and expanding mandrels combined on a single base in various functional arrangements. It is used for swaging the outside diameter of hose assembly fittings, expanding the inside diameter of hose assemblies, and securing the fabrication of hose assemblies. Included are a hand or power operated pump, lubricant, cases, and trays.
What is a Catch Lever Tool? 12 Items: A Catch Lever Tool (LEVER TOOL,CATCH) is a specially designed hand tool which engages the opening and closing lever of a CATCH (as modified) for ease of operation. It is constructed of thin rigid material, usually flat, and one end has an engaging tongue.
What is a Manual Impact Wrench? 11 Items: A Manual Impact Wrench (WRENCH,IMPACT,MANUAL) is a manually operated handheld tool consisting of spring-loaded handle and a power-impact head which delivers a torsional impact from either continuous movement of the handle in one direction, or by a reciprocating action. It is used in tightening and loosening fasteners, such as bolts, nuts, and the like. The item may include sockets, extensions and offset fittings, nut runners, and the like.
What is a Drift? 63 Items: A Drift is an item consisting of a tubular body fitted with replaceable tips. It is designed to insert or remove mechanical components where space is restricted.
What is a Nutdriver? 46 Items: A Nutdriver is a non-powered hand tool with a screwdriver style handle, shaft and formed female hex or square socket at driving end.
What is a Locking Device Removal Tool? 12 Items: A Locking Device Removal Tool (REMOVAL TOOL,LOCKING DEVICE) is a hand tool designed to facilitate the removal of a WASHER, KEY and a LOCKING PLATE, NUT AND BOLT.
What is a Hydraulic Fitting Crimping Tool Head? 26 Items: A Hydraulic Fitting Crimping Tool Head (HEAD,CRIMPING TOOL,HYDRAULIC FITTING) is a component of a crimping tool used to compress fittings on fluid tubes. It consists of a U-shape item, in which, are mounted different sizes of DIE, CRIMPING TOOL for tubes of various diameters.
What is a Torque Screwdriver? 11 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.
What is a Special Purpose Combination Wrench? 13 Items: A Special Purpose Combination Wrench (WRENCH,COMBINATION,SPECIAL PURPOSE) is a tool having a combination of ends and facets. The ends may have open end, box or spanner characteristics. The sides may have features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s). Designed to fit specific items, not sized as standard or metric.
What is a Screwdriver Bit Holder? 56 Items: A Screwdriver Bit Holder (HOLDER,SCREWDRIVER BIT) is an attachment with a socket end for accepting male hexagon shank insert bits and a drive end for adapting to a portable power or hand tool.
What is a Telescoping Pole? 16 Items: A Telescoping Pole (POLE,TELESCOPING) is an item which is designed to be extended or compressed by the sliding of overlapping sections. This item may or may not be able to accommodate an extension.

Stock Items From Supply Class 5120 Page 29 of 110

5120-14-373-2413
Maintien Cle

143732413
M31-149A: RNCC: 3 | RNVC: 2

21 Oct 1981

5120-14-526-2073
Cle Male

5120-14-490-8805
Aiguill

144908805
4066 213 400 300: RNCC: 3 | RNVC: 2
F300 0T 000 5077: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-437-3704
Doigts Cle Arrache

144373704
AR43: RNCC: 3 | RNVC: 2

31 Jan 1990

5120-14-297-1281
Cle Frein De Roue

142971281
PR46552: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-406-5705
Montage Outil

144065705
853-200-756-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-321-3792
Outillage Demontage

143213792
1812059: RNCC: 3 | RNVC: 2
1812059: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-395-7523
De Montage Outil

143957523
0UT70: RNCC: 3 | RNVC: 2

30 Oct 1984

5120-14-212-0111

5120-14-319-6204
Lampe Extracteur

5120-14-329-3270

5120-14-354-1509

5120-14-406-5744
Centreur

144065744
853-200-905-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-290-6958

5120-14-283-2517

5120-14-234-3432

5120-14-233-8835
Bec Pour Pince A Ri

142338835
NO PRIMARY REF14-233-8835: RNCC: 3 | RNVC: 2
15017-4: RNCC: 5 | RNVC: 9
7810451: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-520-5599

5120-14-289-3830

5120-14-398-6814
Outil De Pose

143986814
16019110B: RNCC: 3 | RNVC: 2
JD258: RNCC: 3 | RNVC: 2

31 Jan 1985

5120-14-345-0183
Montage Grue Outil

143450183
3901521: RNCC: 3 | RNVC: 2

5 Oct 1977

5120-14-468-9668
Ring Retaining Pliers Tip Set

144689668
113.10-2: RNCC: 3 | RNVC: 2
3148511329207: RNCC: 5 | RNVC: 2
0132920: RNCC: 5 | RNVC: 9

30 Mar 1994

5120-14-476-9418
Bearing And Bushing Inserter And Remover

144769418
5001007474: RNCC: 3 | RNVC: 2

12 Jul 1995

5120-14-308-9242
Mandrin Pose Bague

143089242
188444: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-489-3440
Socket Wrench Socket

144893440
R.7E: RNCC: 3 | RNVC: 2
3148510510408: RNCC: 5 | RNVC: 2
0051040: RNCC: 5 | RNVC: 9

9 Jul 1997

5120-14-407-6235
Levier Essais Survi

144076235
24546851100: RNCC: 3 | RNVC: 2
245468511: RNCC: 5 | RNVC: 9

27 Feb 1986

5120-14-212-1413
Spanner Wrench

142121413
255006: RNCC: 3 | RNVC: 2
255006: RNCC: 5 | RNVC: 9

5 Jul 1980

5120-14-285-1187
Outil De Reglage

142851187
PR46458: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-464-9080
De Planage Tas

144649080
851-930-061-0: RNCC: 3 | RNVC: 2

8 Sep 1993

5120-14-521-6343
Socket Wrench Socket

145216343
NO PRIMARY REF14-521-6343: RNCC: 3 | RNVC: 2
J.22HL: RNCC: 5 | RNVC: 9

30 Aug 2000

5120-14-475-8871
Socket Wrench Screwdriver Attachment

144758871
NO PRIMARY REF14-475-8871: RNCC: 3 | RNVC: 2
0053360: RNCC: 5 | RNVC: 2
RTC.5: RNCC: 5 | RNVC: 2
18509470-7: RNCC: 5 | RNVC: 2

10 May 1995

5120-14-403-3474
Bearing And Bushing Inserter

144033474
8-0134D: RNCC: 3 | RNVC: 2
101237: RNCC: 5 | RNVC: 2

21 Aug 1985

5120-14-255-6573

5120-14-243-1943

5120-14-297-6226

5120-14-368-4109
Boit Bras Deposeur

143684109
8812437000: RNCC: 3 | RNVC: 2

20 Feb 1981

5120-14-564-8265
Wrench Kit

145648265
R.2AM: RNCC: 3 | RNVC: 2

9 Jun 2010

5120-14-561-6013
Mechanical Puller

145616013
M20890: RNCC: 3 | RNVC: 2

3 Aug 2009

5120-14-349-0306

5120-14-249-4685
Torque Wrench Adapter

142494685
19-26: RNCC: 3 | RNVC: 2
19-26: RNCC: 5 | RNVC: 2
M2-053: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-528-8176
Pliers

145288176
2612-00: RNCC: 3 | RNVC: 2
SYQ0822: RNCC: 5 | RNVC: 2

18 Feb 2002

5120-14-321-9562
Cle A Panier

143219562
GSM196-010F38: RNCC: 3 | RNVC: 2
GSM196-10F38: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-353-3503
Pince Dejecteur

143533503
RT17270: RNCC: 3 | RNVC: 2
85-689-9439: RNCC: 6 | RNVC: 9

8 Dec 1978

5120-14-488-9504
Montage D Essais

144889504
24359: RNCC: 3 | RNVC: 2

13 Jun 1997

5120-14-316-6656
Wrench Extension Handle

143166656
AK25: RNCC: 3 | RNVC: 2
AK25: RNCC: 5 | RNVC: 1
85-684-8623: RNCC: 6 | RNVC: 9

1 Jan 1975

5120-14-393-0273
Combination Box And Open End Wrench

143930273
41.12: RNCC: 3 | RNVC: 2
3148511013595: RNCC: 5 | RNVC: 2
41-12: RNCC: 5 | RNVC: 2

12 Apr 1984

5120-14-369-3458
Spanner Wrench

143693458
M24-034: RNCC: 3 | RNVC: 2

17 Apr 1981

5120-14-255-4175

5120-14-340-6867
Spanner Wrench

143406867
0S20019: RNCC: 3 | RNVC: 2
0MDS20019: RNCC: 5 | RNVC: 2
85-689-2327: RNCC: 6 | RNVC: 9

14 Feb 1977

5120-14-442-5437
Socket Wrench Socket

144425437
JB.11/16: RNCC: 3 | RNVC: 2
3148510291581: RNCC: 5 | RNVC: 2
JB-11-16: RNCC: 5 | RNVC: 2
0029158: RNCC: 5 | RNVC: 9

17 Oct 1990

5120-14-323-1303

5120-14-315-1254
Cle Mont Mat-Verin

143151254
MD003-10-00REP6: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-490-1582
Socket Wrench Socket

144901582
J.17LVSE: RNCC: 3 | RNVC: 2
3148510275994: RNCC: 5 | RNVC: 2
0027599: RNCC: 5 | RNVC: 9

17 Sep 1997

5120-14-264-1573
Open End Wrench

142641573
10A2 1-8: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-552-7044
Socket Wrench Socket

145527044
J.21HLA: RNCC: 3 | RNVC: 2

24 Jan 2007

5120-14-521-6663
Socket Wrench Socket

145216663
2P84563-00: RNCC: 3 | RNVC: 2

1 Sep 2000

5120-14-287-1109
Brad Awl

142871109
P0INC0NR0NDLAME80MM: RNCC: 2 | RNVC: 2
NO PRIMARY REF14-287-1109: RNCC: 3 | RNVC: 2
P0INC0NR0NDLAME80MM: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-256-5828
Open End Wrench

142565828
NO PRIMARY REF14-256-5828: RNCC: 3 | RNVC: 2
N13-17: RNCC: 5 | RNVC: 9

1 Jan 1969

5120-14-440-8812
Rotary Wheel Wire Brush

144408812
72-48-02-16-01: RNCC: 3 | RNVC: 2

1 Aug 1990

5120-14-264-0424

5120-14-248-1280

5120-14-259-9164
Cle

142599164
M3-069-10: RNCC: 3 | RNVC: 2
M3-069-10: RNCC: 5 | RNVC: 9

1 Jan 1969

5120-14-460-8987
Pointeau

5120-14-276-3235
Swivel Knob Jeweler's Screwdriver

142763235
NO PRIMARY REF14-276-3235: RNCC: 3 | RNVC: 2
C0PSAT1875L65SAT1875N: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-357-9355
Screwdriver Bit

143579355
AMM.2: RNCC: 3 | RNVC: 2
AMM2: RNCC: 5 | RNVC: 2
101788: RNCC: 5 | RNVC: 2
3148510076805: RNCC: 5 | RNVC: 2
0007680: RNCC: 5 | RNVC: 9

20 Jul 1979

5120-14-530-1999
Solid Center Punch

145301999
255.G8: RNCC: 3 | RNVC: 2
3148511604564: RNCC: 5 | RNVC: 2

22 May 2002

5120-14-313-7262
Face Spanner Wrench Socket

143137262
C47457: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-220-0310
Open End Wrench

142200310
3000142: RNCC: 3 | RNVC: 2
VIR3000142: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-578-5199
Seal Inserter

145785199
OU300278: RNCC: 3 | RNVC: 2

9 Dec 2013

5120-14-490-8912
Lime

144908912
4067 210 000 533: RNCC: 3 | RNVC: 2
F300 0T 000 5186: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-490-8893
Filiere

144908893
4067 170 001 212: RNCC: 3 | RNVC: 2
F300 0T 000 5165: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-553-0381
Socket Wrench Socket

145530381
NKB.19: RNCC: 3 | RNVC: 2

26 Feb 2007

5120-14-462-9118
Seal Inserter And Remover

144629118
45057919: RNCC: 3 | RNVC: 2
45057919: RNCC: 5 | RNVC: 9

5 May 1993

5120-14-474-3033
Socket Wrench Handle Bar

144743033
1031373T00: RNCC: 3 | RNVC: 2

8 Feb 1995

5120-14-265-4736
Open End Wrench

142654736
0345-78: RNCC: 3 | RNVC: 2
0345-78: RNCC: 3 | RNVC: 2
RA345: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-522-2914
Slip Joint Pliers

145222914
M19060: RNCC: 3 | RNVC: 2

19 Oct 2000

5120-14-224-9892

5120-14-255-4430
Spanner Wrench

142554430
321-95-0003: RNCC: 3 | RNVC: 2
08-340: RNCC: 5 | RNVC: 2

1 Jan 1969

5120-14-484-6495
Flat Tip Screwdriver

144846495
NO PRIMARY REF14-484-6495: RNCC: 3 | RNVC: 2
3148510059297: RNCC: 5 | RNVC: 2
AH.10X175: RNCC: 5 | RNVC: 2
0005929: RNCC: 5 | RNVC: 9

28 Nov 1996

5120-14-253-4531
Guide Axe

142534531
321-95-0015: RNCC: 3 | RNVC: 2
08-381: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-444-3522

5120-14-427-3872

5120-14-341-9587
Cle Dynamomet Pince

143419587
8810285000: RNCC: 3 | RNVC: 2

14 Apr 1977

5120-14-269-4933

5120-14-343-8336

5120-14-237-5438
Broche Speciale

142375438
MS471: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-491-3827
Cle

144913827
1135: RNCC: 3 | RNVC: 2
F300 0T 002 6136: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-406-0536

5120-14-406-6151

5120-14-042-5676
Electrical Contact Inserter And Remover

5120-14-573-3407
Screwdriver Bit Holder

145733407
F0541: RNCC: 3 | RNVC: 2

5 Oct 2012

5120-14-537-5224
Denudeur Thermique

145375224
PB150-S: RNCC: 3 | RNVC: 2

3 Nov 2003

5120-14-268-1559

5120-14-241-6040
Bloc De Presertissa

142416040
RMPS25M: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-399-0287
Poulie Douille Mont

143990287
SP1264: RNCC: 3 | RNVC: 2
700100: RNCC: 5 | RNVC: 2

6 Mar 1985

5120-14-327-2333
Socket Head Screw Key

143272333
P250A1084: RNCC: 3 | RNVC: 2
P250A1084: RNCC: 5 | RNVC: 2
85-505-6022: RNCC: 6 | RNVC: 9

2 Jul 1975

5120-14-274-8343

5120-14-394-1820
Deboucheur A Tambo

143941820
2906200: RNCC: 3 | RNVC: 2

23 Jun 1984

5120-14-494-4494
Cle A Choc

144944494
716821: RNCC: 3 | RNVC: 2
F300 0T 017 3433: RNCC: 6 | RNVC: 9

15 Oct 1997

5120-14-388-9026
Cle Montage Joint T

143889026
20180477: RNCC: 3 | RNVC: 2
20180477: RNCC: 5 | RNVC: 2

29 Nov 1983

5120-14-451-1139
Socket Head Screw Key

144511139
45594884: RNCC: 3 | RNVC: 2
45594884: RNCC: 5 | RNVC: 9

30 Oct 1991

5120-14-375-3659
Electronic Equipment Alignment Tool

143753659
HT.102: RNCC: 3 | RNVC: 2
HT102: RNCC: 5 | RNVC: 2
0027073: RNCC: 5 | RNVC: 2
3148510270739: RNCC: 5 | RNVC: 2

26 Feb 1982

5120-14-489-5579
Bearing And Bushing Inserter

144895579
8819553000: RNCC: 3 | RNVC: 2
F300 0T 023 1093: RNCC: 6 | RNVC: 9

30 Jul 1997

5120-14-451-7840
Hand Armament Subsystem Carrier

144517840
549776: RNCC: 3 | RNVC: 2

4 Dec 1991

5120-14-399-9174
Open End Wrench

143999174
F52227: RNCC: 3 | RNVC: 2

24 Apr 1985

5120-14-488-3159
Flat Tip Screwdriver

144883159
AZFH.14X250: RNCC: 3 | RNVC: 2
3059000172: RNCC: 5 | RNVC: 2
0013442: RNCC: 5 | RNVC: 2
3148510134420: RNCC: 5 | RNVC: 2
AZFH14X250: RNCC: 5 | RNVC: 2
0613 240 14: RNCC: 5 | RNVC: 2

30 Apr 1997

5120-14-411-1030
Hole Sheet Metal Holder

144111030
ML3: RNCC: 3 | RNVC: 2
ML3: RNCC: 3 | RNVC: 2
ML3R0SE: RNCC: 5 | RNVC: 2

6 Aug 1986

5120-14-351-8219
Socket Wrench Socket

143518219
BS32MM: RNCC: 3 | RNVC: 9

16 Oct 1978

5120-14-318-6214
Face Spanner Wrench Socket

143186214
C46359: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-400-7330
Electrical Card Extractor

144007330
95B18672: RNCC: 3 | RNVC: 2

15 May 1985

5120-14-457-5822
Mechanical Puller Attachment

144575822
45057952: RNCC: 3 | RNVC: 2
45057952: RNCC: 5 | RNVC: 9

10 Sep 1992

5120-14-232-4409
Combination Box And Open End Wrench

142324409
30-8X8: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-504-6589
Socket Wrench Crowfoot Attachment

145046589
18.14: RNCC: 3 | RNVC: 2
3148510933580: RNCC: 5 | RNVC: 2
0093358: RNCC: 5 | RNVC: 9

25 Feb 1998

5120-14-427-4582
Quick Adjusting Screw Clamp

144274582
274.500: RNCC: 3 | RNVC: 2
3148511630501: RNCC: 5 | RNVC: 2
274-500: RNCC: 5 | RNVC: 2
0163050: RNCC: 5 | RNVC: 9

20 Oct 1988

5120-14-440-8054
Spanner Wrench

144408054
Y075-038-100B: RNCC: 3 | RNVC: 2

25 Jul 1990

5120-14-372-7696
Open End Wrench

143727696
01-437-0010: RNCC: 3 | RNVC: 2
437-65001-114: RNCC: 5 | RNVC: 2
85-691-5285: RNCC: 6 | RNVC: 9

21 Sep 1981

5120-14-395-4410
Socket Head Screw Key

143954410
2-37281: RNCC: 3 | RNVC: 2

25 Oct 1984

5120-14-486-5602
Outillage De C

144865602
RT13632: RNCC: 3 | RNVC: 2

24 Mar 1997

5120-14-207-4923
Seal Inserter And Remover

142074923
6-000-318: RNCC: 3 | RNVC: 2

1 Jan 1964

5120-14-263-1186
Dispositif De Monta

142631186
0UT15704: RNCC: 3 | RNVC: 2
0UT15704: RNCC: 5 | RNVC: 9

1 Jan 1970

5120-14-352-1807
Semi-Con Extracteur

143521807
DD13077: RNCC: 3 | RNVC: 9

16 Oct 1978

5120-14-575-4471
Screwdriver Bit

145754471
ENX.255: RNCC: 3 | RNVC: 2

8 Apr 2013

5120-14-572-8996
Socket Head Screw Key

145728996
83.10AVSE: RNCC: 3 | RNVC: 2

23 Aug 2012

5120-14-269-4960

5120-14-292-6751

5120-14-212-1582

5120-14-528-8984
Hand Terminal Crimping Tool

145288984
457.A: RNCC: 3 | RNVC: 2

20 Feb 2002

5120-14-524-0352
Socket Head Screw Key

145240352
E3-4: RNCC: 3 | RNVC: 2

22 Feb 2001

5120-14-334-8244
Retaining Ring Pliers

143348244
0145680: RNCC: 3 | RNVC: 2
197-34: RNCC: 5 | RNVC: 2
197.34: RNCC: 5 | RNVC: 2

2 Jun 1976

5120-14-442-1520
Serre Toles Outil

144421520
853-600-252-6: RNCC: 3 | RNVC: 2

3 Oct 1990

5120-14-417-5773
Outil D'installatio

144175773
91002-1: RNCC: 3 | RNVC: 2

15 Jul 1987

5120-14-267-2112
Screwdriver Bit

142672112
1193-1: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-220-8386
Socket Wrench Crowfoot Attachment

142208386
17-9-47: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-249-9707
Craftsman's Tweezers

142499707
NO PRIMARY REF14-249-9707: RNCC: 3 | RNVC: 2
747AA: RNCC: 5 | RNVC: 9
2117LL: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-450-7485
Cross Tip Screwdriver

144507485
NO PRIMARY REF14-450-7485: RNCC: 3 | RNVC: 2
643100: RNCC: 5 | RNVC: 9
EPH00.3X50: RNCC: 5 | RNVC: 9

22 Oct 1991

5120-14-475-7344
Bearing And Bushing Remover

144757344
3130S95-62-220: RNCC: 3 | RNVC: 2
3130-95-62-220: RNCC: 5 | RNVC: 2

26 Apr 1995

5120-14-398-9415
Spanner Wrench

143989415
010199: RNCC: 3 | RNVC: 2
M334-01-89-30: RNCC: 3 | RNVC: 2
453-65290-000: RNCC: 3 | RNVC: 2

6 Mar 1985

5120-14-209-9028

5120-14-325-3443

5120-14-449-1132
Gradue Secteur

144491132
MKM0435011: RNCC: 3 | RNVC: 2
MKM0435011: RNCC: 5 | RNVC: 2

30 Jul 1991

5120-14-366-9429
Ecouvillon Flexible

143669429
2124: RNCC: 3 | RNVC: 2

11 Dec 1980

5120-14-228-7215

5120-14-371-5672
Bagues Caoutcho Lot

143715672
9970-123-060: RNCC: 3 | RNVC: 2

5 Aug 1981

5120-14-479-7353
Bearing And Bushing Remover

144797353
332A93-3401-01: RNCC: 3 | RNVC: 2

31 Jan 1996

5120-14-465-2043
Pliers

144652043
6000-0130: RNCC: 3 | RNVC: 9
85-694-3211: RNCC: 6 | RNVC: 9

15 Sep 1993

5120-14-252-2763

5120-14-553-6531
Combination Box And Open End Wrench

145536531
40.36LA: RNCC: 3 | RNVC: 2
1N180120083: RNCC: 5 | RNVC: 2
3148516622747: RNCC: 5 | RNVC: 2

2 May 2007

5120-14-410-3438
Bearing And Bushing Inserter And Remover

144103438
8813661000: RNCC: 3 | RNVC: 2

18 Jun 1986

5120-14-557-4358
Hand Hydraulic Jack

145574358
AV-1.5TA-1: RNCC: 3 | RNVC: 2
AV-1.5TA-1: RNCC: 3 | RNVC: 9
438232: RNCC: 5 | RNVC: 2
BV-1.5TA-1: RNCC: 5 | RNVC: 9

10 Jun 2008

5120-14-273-7714
Flat Tip Screwdriver

142737714
FR3: RNCC: 3 | RNVC: 2
SYQ0863: RNCC: 5 | RNVC: 2
1.11.03: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-448-9610
Spring Inserter And Remover

144489610
T.10: RNCC: 3 | RNVC: 2
3148510593807: RNCC: 5 | RNVC: 2
T10: RNCC: 5 | RNVC: 2
0059380: RNCC: 5 | RNVC: 9

24 Jul 1991

5120-14-284-1959
Decolleur

142841959
U53G: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-521-0492
Screwdriver Handle

145210492
AMZ-D: RNCC: 3 | RNVC: 2
AMZ.D: RNCC: 5 | RNVC: 2

5 Jul 2000

5120-14-503-5843
Socket Wrench Socket

145035843
J.14LVSE: RNCC: 3 | RNVC: 2
3148510275932: RNCC: 5 | RNVC: 2
0027593: RNCC: 5 | RNVC: 9

21 Jan 1998

5120-14-446-7996
Corde De Delestage

144467996
CH93-1-1: RNCC: 3 | RNVC: 2

16 Apr 1991

5120-14-321-1585
Screw Thread Insert Inserter

143211585
01500105600: RNCC: 3 | RNVC: 2
3207510: RNCC: 5 | RNVC: 2
32240510: RNCC: 5 | RNVC: 2
85-681-2800: RNCC: 6 | RNVC: 9

1 Jan 1975

5120-14-416-3286
Open End Wrench

144163286
45.90: RNCC: 3 | RNVC: 2
3148511054703: RNCC: 5 | RNVC: 2
45-90: RNCC: 5 | RNVC: 2
0105470: RNCC: 5 | RNVC: 9

3 Jun 1987

5120-14-244-4144
Socket Wrench Socket

142444144
J22: RNCC: 3 | RNVC: 2
J.22: RNCC: 3 | RNVC: 2
3148510272603: RNCC: 5 | RNVC: 2
CAE00921: RNCC: 5 | RNVC: 2
J22: RNCC: 5 | RNVC: 2
1068602E00: RNCC: 5 | RNVC: 2
3272670238398: RNCC: 5 | RNVC: 2
91352501: RNCC: 5 | RNVC: 2
0027260: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-471-9852
Socket Wrench Extension

144719852
J.208: RNCC: 3 | RNVC: 2
J208: RNCC: 5 | RNVC: 2
3148510288901: RNCC: 5 | RNVC: 2
1007196G00: RNCC: 5 | RNVC: 2
91778022: RNCC: 5 | RNVC: 2
0028890: RNCC: 5 | RNVC: 9

28 Sep 1994

5120-14-489-8660
Cle De Robinet

144898660
CLES09286X00: RNCC: 3 | RNVC: 2

27 Aug 1997

5120-14-253-9782
Entretoise Extracte

142539782
GA46223: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-457-4366
Bearing And Bushing Inserter And Remover

144574366
45057793: RNCC: 3 | RNVC: 2
45057793: RNCC: 5 | RNVC: 9

3 Sep 1992

5120-14-370-0360
Spanner Wrench

143700360
F117ACM0011: RNCC: 3 | RNVC: 2
F117047: RNCC: 5 | RNVC: 2

18 May 1981

5120-14-530-2022
Socket Wrench Socket

145302022
S.5/8LA: RNCC: 3 | RNVC: 2
3148510557052: RNCC: 5 | RNVC: 2
00.49.22.72: RNCC: 5 | RNVC: 2

22 May 2002

5120-14-323-5025
Pate Abras Pistolet

143235025
FS999101322: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-478-5910
De Serrage Support

144785910
F0M2014: RNCC: 3 | RNVC: 2

8 Nov 1995

5120-14-561-5736
Screwdriver Bit

145615736
ETORM.103: RNCC: 3 | RNVC: 2
3148516398918: RNCC: 5 | RNVC: 2
639891: RNCC: 5 | RNVC: 2

29 Jul 2009

5120-14-313-4687
Raccord Daccoupleme

143134687
WA.1127: RNCC: 3 | RNVC: 2
3148510790206: RNCC: 5 | RNVC: 2
WA1127: RNCC: 5 | RNVC: 2
0079020: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-435-0486
Screwdriver Bit

144350486
0000882: RNCC: 3 | RNVC: 2
A-200-TA1,5: RNCC: 5 | RNVC: 2

17 Oct 1989

5120-14-350-6771
Open End Wrench

143506771
AE271434-2: RNCC: 3 | RNVC: 2

12 Jul 1978

5120-14-529-1883
Mechanical Puller Attachment

145291883
884231-2: RNCC: 3 | RNVC: 2

15 Mar 2002

5120-14-415-9254
Tap And Reamer Wrench

144159254
851-600-975-0: RNCC: 3 | RNVC: 2

26 May 1987

5120-14-548-4189
Socket Wrench Handle

145484189
S.140A: RNCC: 3 | RNVC: 2

13 Jan 2006

5120-14-268-1399

5120-14-249-6737

5120-14-478-5977
Essai Support

144785977
MFG374-26: RNCC: 3 | RNVC: 2

8 Nov 1995

5120-14-225-4011

5120-14-542-9624
Socket Wrench Socket

145429624
809033: RNCC: 3 | RNVC: 2

14 Aug 2004

5120-14-398-0510
Open End Wrench

143980510
0056134111: RNCC: 3 | RNVC: 2

31 Jan 1985

5120-14-261-1814
Cle Pour Robinet

142611814
0T2-2-11: RNCC: 3 | RNVC: 2
0T2-2-11: RNCC: 5 | RNVC: 2
0T0-2-4: RNCC: 5 | RNVC: 2
0T0-2-4: RNCC: 5 | RNVC: 9
0T2-2-11: RNCC: 5 | RNVC: 9

1 Jan 1970

5120-14-344-8634
Flat Tip Screwdriver

143448634
1410-7: RNCC: 3 | RNVC: 2

9 Sep 1977

5120-14-267-2113
Screwdriver Bit

142672113
1193-2: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-475-1630
Socket Wrench Extension

144751630
R.217: RNCC: 3 | RNVC: 2
3148510526850: RNCC: 5 | RNVC: 2
R217: RNCC: 5 | RNVC: 2
TA5006P003: RNCC: 5 | RNVC: 2
0052685: RNCC: 5 | RNVC: 2
1780550300: RNCC: 5 | RNVC: 2
1075689E00: RNCC: 5 | RNVC: 2
91743095: RNCC: 5 | RNVC: 2
R.217: RNCC: 5 | RNVC: 2

22 Mar 1995

5120-14-276-3149
Socket Wrench Socket

142763149
R4: RNCC: 3 | RNVC: 2
65P4: RNCC: 3 | RNVC: 2
R-4: RNCC: 3 | RNVC: 2
R4: RNCC: 3 | RNVC: 2
M4: RNCC: 3 | RNVC: 9
468710: RNCC: 5 | RNVC: 2
3148510505206: RNCC: 5 | RNVC: 2
3272670258648: RNCC: 5 | RNVC: 2
DEMM4: RNCC: 5 | RNVC: 9
73R4: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-529-9686
Socket Wrench Socket

145299686
J.8HLA: RNCC: 3 | RNVC: 2
00.46.25.66: RNCC: 5 | RNVC: 2
3148510273723: RNCC: 5 | RNVC: 2

24 Apr 2002

5120-14-489-4891
Socket Wrench Socket

144894891
R.6F: RNCC: 3 | RNVC: 2
3148510511047: RNCC: 5 | RNVC: 2
R6F: RNCC: 5 | RNVC: 2
0051104: RNCC: 5 | RNVC: 9
AC85321: RNCC: 5 | RNVC: 9
F300 0T 023 6293: RNCC: 6 | RNVC: 9

23 Jul 1997

5120-14-276-3150
Socket Wrench Socket

142763150
65P4-5: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-519-3839
Socket Wrench Socket

145193839
J300-4: RNCC: 3 | RNVC: 2

15 Mar 2000

5120-14-506-3976
Cle Rotule Connexio

145063976
OUT280707T: RNCC: 3 | RNVC: 2
80707T: RNCC: 3 | RNVC: 2

22 Apr 1998

5120-14-236-5180
Cross Tip Screwdriver

142365180
AX.3: RNCC: 3 | RNVC: 2
230P3: RNCC: 3 | RNVC: 2
91352551: RNCC: 5 | RNVC: 2
AX3: RNCC: 5 | RNVC: 2
3148510125602: RNCC: 5 | RNVC: 2
0012560: RNCC: 5 | RNVC: 9
912 063 300 265: RNCC: 6 | RNVC: 9

1 Jan 1967

5120-14-529-1893
Mechanical Puller Attachment

145291893
884888-9: RNCC: 3 | RNVC: 2

15 Mar 2002

5120-14-529-4708
Hand Blind Riveter

145294708
359-3: RNCC: 3 | RNVC: 2
3272670275584: RNCC: 5 | RNVC: 2

29 Mar 2002

5120-14-316-5626
Bearing And Bushing Inserter And Remover

143165626
3210-97-31-028: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-371-4140
Spanner Wrench

143714140
6254-57787: RNCC: 3 | RNVC: 2

5 Aug 1981

5120-14-251-9111
Spanner Wrench

142519111
GSM193-03: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-298-4538
Socket Head Screw Key

142984538
84.3/32: RNCC: 3 | RNVC: 2
16400749-1: RNCC: 5 | RNVC: 2
3148511252208: RNCC: 5 | RNVC: 2
84 3-32: RNCC: 5 | RNVC: 2
84-3-32: RNCC: 5 | RNVC: 2
F300 0T 015 7871: RNCC: 5 | RNVC: 9
0125220: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-416-7493
Plaque D'appui

144167493
537251: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-567-2702
Socket Wrench Screwdriver Attachment

145672702
136381: RNCC: 3 | RNVC: 2

1 Mar 2011

5120-14-260-8788
Cle De Blocage De P

142608788
BR368-22: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-253-3826
Coffret Avec Plaque

142533826
T34BBH3BREP1-25A27: RNCC: 3 | RNVC: 2
T0553BBH3BPC1-25AU27: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-209-4620
Tournevis Pour Cond

142094620
NO PRIMARY REF14-209-4620: RNCC: 3 | RNVC: 2
21620: RNCC: 5 | RNVC: 9
21620: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-320-5634
Rallonge Cle Ser Ro

143205634
7-112-015: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-440-1465
Spanner Wrench

144401465
3511-310-81461: RNCC: 3 | RNVC: 2
3511-310-81461: RNCC: 5 | RNVC: 9

11 Jul 1990

5120-14-262-4908
Presse Demontage Pa

142624908
321-91-0010-00: RNCC: 3 | RNVC: 2
321A91-0010-00: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-409-4471
Loquetea Cle Carree

144094471
NO PRIMARY REF14-409-4471: RNCC: 3 | RNVC: 2
94905000000: RNCC: 5 | RNVC: 9

28 May 1986

5120-14-419-4097
Cle Came Dinversion

5120-14-421-0788
Pince Cloche

144210788
6254-58482: RNCC: 3 | RNVC: 2

6 Jan 1988

5120-14-420-7177
Cle Speciale

144207177
6511-50487: RNCC: 3 | RNVC: 2
50487: RNCC: 5 | RNVC: 2

16 Dec 1987

5120-14-462-1841
Outil De Couplage

144621841
1232-460-000: RNCC: 3 | RNVC: 2
1232-460-000: RNCC: 5 | RNVC: 2
F300 0T 015 0609: RNCC: 5 | RNVC: 9

14 Apr 1993

5120-14-487-6651
Socket Wrench Handle

144876651
8969-70300: RNCC: 3 | RNVC: 2

18 Apr 1997

5120-14-393-0285
Combination Box And Open End Wrench

143930285
41.26: RNCC: 3 | RNVC: 2
41-26: RNCC: 5 | RNVC: 2
3148511013731: RNCC: 5 | RNVC: 2
1060243F00: RNCC: 5 | RNVC: 2

12 Apr 1984

5120-14-378-5578
Spanner Wrench

143785578
6803P32-5424-00: RNCC: 3 | RNVC: 2
6803365A32-5424-00: RNCC: 5 | RNVC: 2

11 Aug 1982

5120-14-427-6486
Socket Head Screw Key

144276486
NO PRIMARY REF14-427-6486: RNCC: 3 | RNVC: 2
E0949619: RNCC: 5 | RNVC: 9

27 Oct 1988

5120-14-337-4929
Socket Head Screw Key

143374929
GSM196-015: RNCC: 3 | RNVC: 2
GSM196-15: RNCC: 5 | RNVC: 2

7 Oct 1976

5120-14-410-0627
Entrainement Cle

144100627
853-100-205-0: RNCC: 3 | RNVC: 2

4 Jun 1986

5120-14-508-5638

5120-14-329-6315
Cle Multiple

143296315
M31-025: RNCC: 3 | RNVC: 2
M31025: RNCC: 5 | RNVC: 2

2 Jul 1975

5120-14-460-0196
Cross Tip Screwdriver

144600196
120011-SERT-7056: RNCC: 3 | RNVC: 2

7 Jan 1993

5120-14-308-0161
Rallonge Villebrequ

143080161
C1-47171: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-225-5584
Extracteur Des Chem

142255584
31222: RNCC: 3 | RNVC: 2
31222A: RNCC: 5 | RNVC: 2

1 Jan 1966

5120-14-240-0083
Rallonge Avec Racco

142400083
K0044BB15AREP4AU6: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-240-5531

5120-14-545-6526
Eta Base Pivotante

145456526
72119: RNCC: 3 | RNVC: 2

26 Apr 2005

5120-14-408-9639

5120-14-319-4529
Bearing And Bushing Inserter And Remover

143194529
3130S95-66-009: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-329-6401
Cle De Maintien

143296401
MHN151-21: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-319-4077
Open End Wrench

143194077
71-47: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-572-5533
Socket Wrench Screwdriver Attachment

145725533
261807957: RNCC: 3 | RNVC: 2

12 Jul 2012

5120-14-483-0697
Combination Box And Open End Wrench

144830697
39.7/32H: RNCC: 3 | RNVC: 2
3148510999067: RNCC: 5 | RNVC: 2
0099906: RNCC: 5 | RNVC: 9
099906: RNCC: 5 | RNVC: 9

8 Aug 1996

5120-14-388-5243
Open End Wrench

143885243
NO PRIMARY REF14-388-5243: RNCC: 3 | RNVC: 2
NB02-14: RNCC: 5 | RNVC: 2
NB02-14: RNCC: 5 | RNVC: 9

3 Nov 1983

5120-14-415-0262
Screwdriver Bit

144150262
65-7-02-045A00-611060B: RNCC: 3 | RNVC: 2
0416218E00: RNCC: 5 | RNVC: 2
89414795: RNCC: 5 | RNVC: 2

26 Mar 1987

5120-14-392-0866
Torque Wrench Adapter

143920866
853-100-097-0: RNCC: 3 | RNVC: 2

21 Mar 1984

5120-14-564-8195
Adjustable Wrench

145648195
D19-150: RNCC: 3 | RNVC: 2

9 Jun 2010

5120-14-559-9017
Hand Hammer

145599017
8000008: RNCC: 3 | RNVC: 2
00101372: RNCC: 5 | RNVC: 2

3 Mar 2009

5120-14-382-1533
Montage De Reglage

143821533
098001: RNCC: 3 | RNVC: 2

25 Jan 1983

5120-14-316-6626

5120-14-405-2335
Equi Gonfleur Verif

144052335
099018D: RNCC: 3 | RNVC: 2

27 Nov 1985

5120-14-497-5554
Cle

144975554
PD975984: RNCC: 3 | RNVC: 2
F300 0T 023 3543: RNCC: 6 | RNVC: 9

15 Oct 1997

5120-14-208-6385

5120-14-321-9075
Demontage Cuve Cle

143219075
000MA435: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-208-6029

5120-14-323-4467
Piston Compresseur

143234467
M16-032: RNCC: 3 | RNVC: 2
M16-032: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-423-2330
Ens Vis De Poussee

144232330
SP2085D-12: RNCC: 3 | RNVC: 2

14 Apr 1988

5120-14-514-0215
Open End Wrench

145140215
ENFD29159-46X50: RNCC: 3 | RNVC: 2

22 Apr 1999

5120-14-404-0345
Cle Speciale

144040345
9970-115-719: RNCC: 3 | RNVC: 2

11 Sep 1985

5120-14-227-8929
Open End Wrench

142278929
35-7: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-366-0237
Frein Cle Controle

143660237
30AM051: RNCC: 3 | RNVC: 2

4 Nov 1980

5120-14-337-1144

5120-14-382-7075
Insertion Axe Outil

143827075
6391-121E27-503-50-2: RNCC: 3 | RNVC: 2
6391-121E27-503-50-2: RNCC: 5 | RNVC: 2

17 Feb 1983

5120-14-259-6285
Plaque De Fixation

142596285
20515A: RNCC: 3 | RNVC: 2
40677-14: RNCC: 5 | RNVC: 2

1 Jan 1969

5120-14-280-1442

5120-14-292-7390

5120-14-253-3677
Etrier De Jauge Pou

142533677
410228M: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-442-6829
Open End Wrench

144426829
000-0101: RNCC: 3 | RNVC: 2

24 Oct 1990

5120-14-458-3103
Bearing And Bushing Remover

144583103
45056299: RNCC: 3 | RNVC: 2
45056299: RNCC: 5 | RNVC: 9

15 Oct 1992

5120-14-427-2042
Extracteur Corps

144272042
46AM013-00-0001: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-504-6895
Wrench Extension Handle

145046895
K-202MA: RNCC: 3 | RNVC: 2
3148510309408: RNCC: 5 | RNVC: 2

27 Feb 1998

5120-14-321-1534
Open End Wrench

143211534
NO PRIMARY REF14-321-1534: RNCC: 3 | RNVC: 2
13 9-16X7-8: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-442-4613
Spanner Wrench

144424613
507150AIF032M2: RNCC: 3 | RNVC: 2
507150A: RNCC: 5 | RNVC: 2
IF032117-2-01: RNCC: 5 | RNVC: 9

17 Oct 1990

5120-14-222-1650
Cle De Reglage Micr

142221650
726772: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-496-0854
Detent Handling Tool

144960854
EL62-1-0101: RNCC: 3 | RNVC: 2
F300 0T 020 8691: RNCC: 6 | RNVC: 9

15 Oct 1997

5120-14-222-1436
Flat Tip Screwdriver

142221436
E74-351-1-2X8X125BAI0NNETTE: RNCC: 2 | RNVC: 2
249-6: RNCC: 3 | RNVC: 2
FRP3: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-347-5745
Outil Positionnemen

143475745
26-147: RNCC: 3 | RNVC: 2

1 Mar 1978

5120-14-404-0828
Rotating Members Aligning Tool

144040828
853-201-439-0: RNCC: 3 | RNVC: 2

11 Sep 1985

5120-14-514-5520
Flat Tip Screwdriver

145145520
ENFD6563-0-8X4X250: RNCC: 3 | RNVC: 2

28 May 1999

5120-14-468-2287
Spanner Wrench

144682287
EV183-ANNEXE2MONTAGE/B: RNCC: 3 | RNVC: 2

15 Feb 1994

5120-14-340-0556
Open End Wrench

143400556
65-3-1145: RNCC: 3 | RNVC: 2

18 Jan 1977

5120-14-449-9243
Spanner Wrench

144499243
7062RUF1-1-DN65-ACIER304L: RNCC: 3 | RNVC: 9

16 Sep 1991

5120-14-443-8022
Flasque Darret

144438022
D12504-040-02: RNCC: 3 | RNVC: 2

5 Dec 1990

5120-14-401-4082
Spanner Wrench

144014082
350A93-3205-00: RNCC: 3 | RNVC: 2

5 Jun 1985

5120-14-550-5851
Open End Wrench

145505851
270M626-00: RNCC: 3 | RNVC: 2

28 Jun 2006

5120-14-451-0450
Outil Manut Chap Bi

144510450
02240900200: RNCC: 3 | RNVC: 2
016184-01: RNCC: 5 | RNVC: 2
M827880: RNCC: 5 | RNVC: 2

28 Oct 1991

5120-14-425-6010
Screwdriver Bit

144256010
NO PRIMARY REF14-425-6010: RNCC: 3 | RNVC: 2
0025061: RNCC: 5 | RNVC: 2
ETS6: RNCC: 5 | RNVC: 2

12 Jul 1988

5120-14-302-5065
Mandrin Demontage

143025065
NO PRIMARY REF14-302-5065: RNCC: 3 | RNVC: 2
42-25-04-022: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-527-4484

5120-14-409-7804
Screw Thread Insert Inserter

144097804
01500283400: RNCC: 3 | RNVC: 2

28 May 1986

5120-14-421-0162
Socket Wrench Adapter

144210162
39530117: RNCC: 3 | RNVC: 2
39530117: RNCC: 5 | RNVC: 9

6 Jan 1988

5120-14-574-6207
Open End Wrench

145746207
DR-98200: RNCC: 3 | RNVC: 2

6 Feb 2013

5120-14-041-1976
Spanner Wrench

140411976
7062RUF1-32X40ACIER: RNCC: 2 | RNVC: 2
N410-33: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-262-9727
Bouchon Prise Tube

142629727
6800-2125: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-422-2383
Socket Head Screw Key

144222383
0372-42-10079: RNCC: 3 | RNVC: 2

24 Feb 1988

5120-14-507-0528
Cabarit Precablage

145070528
4619513: RNCC: 3 | RNVC: 2

8 Jun 1998

5120-14-330-6876
Outil Dextraction

143306876
809737: RNCC: 3 | RNVC: 2
85-679-8860: RNCC: 6 | RNVC: 9

2 Jul 1975

5120-14-412-2981
Mise En Place Outil

144122981
MFG019-26: RNCC: 3 | RNVC: 2
MFG019-26: RNCC: 5 | RNVC: 2

8 Oct 1986

5120-14-400-1925
Cle Dapproche

144001925
330A93-2003-02: RNCC: 3 | RNVC: 2

24 Apr 1985

5120-14-508-5719
Socket Head Screw Key

145085719
WR-10000-3/80249: RNCC: 3 | RNVC: 2
WR-10000-3: RNCC: 5 | RNVC: 2

16 Sep 1998

5120-14-443-6310
Monte Segment

144436310
NO PRIMARY REF14-443-6310: RNCC: 3 | RNVC: 2
OU129484-1: RNCC: 5 | RNVC: 9

30 Nov 1990

5120-14-544-1627
Spanner Wrench

145441627
942667-0000: RNCC: 3 | RNVC: 2

6 Jan 2005

5120-14-229-8607
Open End Wrench

142298607
E74302C26-29WWK: RNCC: 2 | RNVC: 1
15-26X29: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-385-0722
Torque Wrench Multiplier

143850722
ML300: RNCC: 3 | RNVC: 2
ML-300: RNCC: 3 | RNVC: 2
3272670276680: RNCC: 5 | RNVC: 2

2 Jun 1983

5120-14-313-4685
Raccord Daccoupleme

143134685
WA.1125: RNCC: 3 | RNVC: 2
3148510789804: RNCC: 5 | RNVC: 2
WA1125: RNCC: 5 | RNVC: 2
0078980: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-562-3088
Stakeholder Bench Plate

145623088
J00004940E: RNCC: 3 | RNVC: 2

13 Oct 2009

5120-14-509-5851

5120-14-430-3456
Bouchon Extracteur

144303456
RT17394: RNCC: 3 | RNVC: 2

15 Mar 1989

5120-14-485-8843
Open End Wrench

144858843
K7739-1-15/16: RNCC: 3 | RNVC: 2
1-15/16: RNCC: 5 | RNVC: 2

19 Feb 1997

5120-14-276-3071
Socket Wrench Socket

142763071
M63: RNCC: 3 | RNVC: 2
M63: RNCC: 3 | RNVC: 2
M-63: RNCC: 3 | RNVC: 2
T63: RNCC: 3 | RNVC: 9
3148510318103: RNCC: 5 | RNVC: 2
3272670208643: RNCC: 5 | RNVC: 2
DEMT63: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-355-2020
Open End Wrench

143552020
206350: RNCC: 3 | RNVC: 2

19 Mar 1979

5120-14-449-1529
Spanner Wrench

144491529
60919851: RNCC: 3 | RNVC: 2
89280562: RNCC: 5 | RNVC: 2

31 Jul 1991

5120-14-376-0845

5120-14-386-1527
Detent Handling Tool

143861527
365A96-3355-20: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-394-0619
Retaining Ring Pliers

143940619
20-99910-000: RNCC: 3 | RNVC: 2
20-99-910-000: RNCC: 5 | RNVC: 2
85-692-6356: RNCC: 6 | RNVC: 9

23 Jun 1984

5120-14-357-9974
Equipe Embout

143579974
MKM0423700: RNCC: 3 | RNVC: 2
MKM0423700: RNCC: 5 | RNVC: 2

20 Jul 1979

5120-14-572-9953
Combination Box And Open End Wrench

145729953
467F.14: RNCC: 3 | RNVC: 2
3148518196901: RNCC: 5 | RNVC: 2
819690: RNCC: 5 | RNVC: 2

3 Sep 2012

5120-14-576-6614
Box Wrench

145766614
82555300000: RNCC: 3 | RNVC: 2

3 Jul 2013

5120-14-031-6863

5120-14-425-9268
Mandrin Emmanchemen

144259268
600142: RNCC: 3 | RNVC: 2

28 Jul 1988

5120-14-384-4992
Outil Dajustage

143844992
J10250: RNCC: 3 | RNVC: 2

4 May 1983

5120-14-304-3158
Cone De Montage

143043158
S16-0607-1681: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-467-2889
Montage Blocage Com

144672889
NO PRIMARY REF14-467-2889: RNCC: 3 | RNVC: 2
601514-78: RNCC: 5 | RNVC: 9

3 Jan 1994

5120-14-349-1704
Outil Verif Vrillag

143491704
341A94-3400-01: RNCC: 3 | RNVC: 2

19 Apr 1978

5120-14-285-6260

5120-14-206-7995
Blacksmith's Punch

142067995
M0B12-10ECCARRE: RNCC: 3 | RNVC: 2
16-10: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-334-0435

5120-14-231-8236
Extracteur Palier D

142318236
9970-121-001: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-404-8681
Electrical Contact Remover

144048681
NO PRIMARY REF14-404-8681: RNCC: 3 | RNVC: 2
29333262: RNCC: 5 | RNVC: 9

20 Nov 1985

5120-14-330-7069
Protection Douille

143307069
BR4X530: RNCC: 3 | RNVC: 2
4X530: RNCC: 5 | RNVC: 2
85-100-4938: RNCC: 6 | RNVC: 9

2 Jul 1975

5120-14-552-3114
Leveling-Support Jack

145523114
AMBELG P 200057 AA: RNCC: 3 | RNVC: 2

12 Dec 2006

5120-14-459-6480
Cle Speciale

144596480
312-05251-001-W23F3: RNCC: 3 | RNVC: 2

10 Dec 1992

5120-14-255-6425

5120-14-313-9200
Jeu De Pose Oeillet

143139200
NO PRIMARY REF14-313-9200: RNCC: 3 | RNVC: 2
107JEUDEP0SEMALE: RNCC: 5 | RNVC: 9
RECHBF107MALE: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-352-3193
Open End Wrench

143523193
MHB335-44: RNCC: 3 | RNVC: 2
MHB335-44: RNCC: 5 | RNVC: 2
MHL360-22: RNCC: 5 | RNVC: 2

16 Oct 1978

5120-14-384-7354
Electrical Card Extractor

143847354
NO PRIMARY REF14-384-7354: RNCC: 3 | RNVC: 2
20030731: RNCC: 5 | RNVC: 9

2 Jun 1983

5120-14-461-2106
Outillage Montage

144612106
23MEFL312131306-REP1A7-10-12: RNCC: 3 | RNVC: 2
23MEFM312131306-REP1A7-10-12: RNCC: 3 | RNVC: 2
RAB0631: RNCC: 5 | RNVC: 2

2 Mar 1993

5120-14-311-4539
Obus Demmanchement

143114539
3160S95-33-135: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-432-7771
Rallonge Gaine

144327771
NO PRIMARY REF14-432-7771: RNCC: 3 | RNVC: 2
13602520Y: RNCC: 5 | RNVC: 9

26 Jun 1989

5120-14-332-3832
Face Spanner Wrench Socket

143323832
M31-066: RNCC: 3 | RNVC: 2
M31-066: RNCC: 5 | RNVC: 9

2 Jul 1975

5120-14-330-5775
Pose Reper A Raclet

143305775
RACAP75: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-256-1876
Socket Head Screw Key

142561876
0371-0203: RNCC: 3 | RNVC: 2
SAF0371-0203: RNCC: 5 | RNVC: 9

1 Jan 1969

5120-14-273-6987
Marteau A Mai Corps

5120-14-396-4132
Spanner Wrench

143964132
6274-51023: RNCC: 3 | RNVC: 2
6274-2712220: RNCC: 5 | RNVC: 2

27 Nov 1984

5120-14-565-7802
Open End Wrench

145657802
LFEM953-029: RNCC: 3 | RNVC: 2

22 Sep 2010

5120-14-204-9384
Mattock

142049384
NO PRIMARY REF14-204-9384: RNCC: 3 | RNVC: 2
ST15SMG0RT5-321: RNCC: 5 | RNVC: 9

1 Jan 1963

5120-14-559-2268
Electrical Contact Inserter

145592268
SM-015 00 00 003: RNCC: 3 | RNVC: 2

15 Dec 2008

5120-14-369-4906
Tas Tassement Aubag

143694906
9970-126-300: RNCC: 3 | RNVC: 2

17 Apr 1981

5120-14-230-0999
Open End Wrench

142300999
0102484: RNCC: 3 | RNVC: 2
44.35X38: RNCC: 5 | RNVC: 2
44S35X38: RNCC: 5 | RNVC: 2
44-35X38: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-412-2976
De Montag Outillage

144122976
MGA247-23: RNCC: 3 | RNVC: 2
MGA247-23: RNCC: 5 | RNVC: 2

8 Oct 1986

5120-14-541-1973
Socket Wrench Screwdriver Attachment Set

145411973
E.105EP: RNCC: 3 | RNVC: 2

19 May 2004

5120-14-471-0839
Cle Ecrou Brh

144710839
1980828: RNCC: 3 | RNVC: 2
RAB3412: RNCC: 5 | RNVC: 2

26 Jul 1994

5120-14-302-6525

5120-14-444-3164

5120-14-476-3058
Mechanical Puller Attachment

144763058
884551: RNCC: 3 | RNVC: 2
RAB3874: RNCC: 5 | RNVC: 2
884551: RNCC: 5 | RNVC: 9

6 Jun 1995

5120-14-570-6452
Socket Wrench

145706452
332A93-3214-22: RNCC: 3 | RNVC: 2

13 Jan 2012

5120-14-228-0086
Broche Speciale

142280086
S20-5902-3001: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-411-8184
Extracteur

144118184
451-05-01M2: RNCC: 3 | RNVC: 2

9 Sep 1986

5120-14-447-3416
Combination Box And Open End Wrench

144473416
39.17: RNCC: 3 | RNVC: 2
3148510998909: RNCC: 5 | RNVC: 2
39-17: RNCC: 5 | RNVC: 2
91714505: RNCC: 5 | RNVC: 2
0099890: RNCC: 5 | RNVC: 9

15 May 1991

5120-14-309-1232

5120-14-316-6611

5120-14-422-2340
Cle Reglage Excentr

144222340
0436-01-133000: RNCC: 3 | RNVC: 2

24 Feb 1988

5120-14-505-3035
Mesureur Couple

145053035
MMJ059-07: RNCC: 3 | RNVC: 2

18 Mar 1998

5120-14-316-6642

5120-14-406-6611

5120-14-232-7877
Flat Tip Screwdriver

142327877
210-2: RNCC: 3 | RNVC: 2
AK6X150: RNCC: 5 | RNVC: 2
708-6X150: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-349-1043
Electrical Contact Inserter

143491043
8700-35: RNCC: 3 | RNVC: 2
878418: RNCC: 5 | RNVC: 2
878418: RNCC: 5 | RNVC: 2

19 Apr 1978

5120-14-243-3191
Cle A Fourche Speci

142433191
M16-003: RNCC: 3 | RNVC: 2
M16-003: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-469-0477
Screwdriver Bit

144690477
EP.102T: RNCC: 3 | RNVC: 2
3148510241463: RNCC: 5 | RNVC: 2
162-6041: RNCC: 5 | RNVC: 2
0614 176 461: RNCC: 5 | RNVC: 2
EP.102T: RNCC: 5 | RNVC: 2
024146: RNCC: 5 | RNVC: 9
FACOMEP.102T: RNCC: 5 | RNVC: 9
0024146: RNCC: 5 | RNVC: 9

5 Apr 1994

5120-14-217-2644
Broche Droite Prese

142172644
M12-034: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-326-9153
Socket Wrench Screwdriver Attachment

143269153
468722: RNCC: 3 | RNVC: 2
LMT468722: RNCC: 5 | RNVC: 2
468722: RNCC: 5 | RNVC: 2

2 Jul 1975

5120-14-402-9779
Flat Tip Screwdriver

144029779
89234984: RNCC: 3 | RNVC: 2
89234984: RNCC: 5 | RNVC: 9

25 Jul 1985

5120-14-437-9819
Piston Ring Expander

144379819
05995003: RNCC: 3 | RNVC: 2

5 Mar 1990

5120-14-462-1444
Accouplement Cone

144621444
1686430026: RNCC: 3 | RNVC: 2

7 Apr 1993

5120-14-040-0664
Poussoir

140400664
NO PRIMARY REF14-040-0664: RNCC: 3 | RNVC: 2
BL43939: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-208-6116
Tournevis Dynamomet

142086116
40-1: RNCC: 3 | RNVC: 2
468704: RNCC: 5 | RNVC: 2
76-50: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-458-8479
Handling Tool Arm

144588479
854-400-344-0: RNCC: 3 | RNVC: 2

5 Nov 1992

5120-14-392-0861
Wrench Extension Handle

143920861
853-100-115-0: RNCC: 3 | RNVC: 2

21 Mar 1984

5120-14-379-0600
Bague De Centrage

143790600
330A93-4100-25: RNCC: 3 | RNVC: 2
330A-93-4100-25: RNCC: 5 | RNVC: 2

6 Sep 1982

5120-14-276-3245
Screwdriver Bit

142763245
NO PRIMARY REF14-276-3245: RNCC: 3 | RNVC: 2
C0PSAT1875L14: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-427-1518
Cle Pour Oculaire

144271518
6814-58790: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-548-4364
Bearing And Bushing Inserter And Remover

145484364
U.49P5: RNCC: 3 | RNVC: 2

17 Jan 2006

5120-14-444-3535
Socket Wrench Socket

144443535
GS66-08: RNCC: 3 | RNVC: 2

9 Jan 1991

5120-14-316-6613

5120-14-239-5199

5120-14-228-5928

5120-14-329-5962
Faux Mors

143295962
C47354: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-493-7001
Serre-Tu Cle Chaine

144937001
136A.C4: RNCC: 3 | RNVC: 2
3148511372708: RNCC: 5 | RNVC: 2
136A-C4: RNCC: 5 | RNVC: 2
0137270: RNCC: 5 | RNVC: 9

13 Oct 1997

5120-14-371-5701
Glissier Positionne

143715701
9970-121-194: RNCC: 3 | RNVC: 2

5 Aug 1981

5120-14-326-2771
Mechanical Puller Attachment

143262771
330A98-3115-20: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-275-2598

5120-14-287-6949
Mandrin Pour Racord

142876949
1070931: RNCC: 3 | RNVC: 2
BPL92-100: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-472-1654
Retaining Ring Pliers

144721654
2928-200: RNCC: 3 | RNVC: 2

12 Oct 1994

5120-14-280-9505
Retaining Ring Pliers

142809505
49D: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-541-0946
Cable Tie Installation Tool

145410946
455.J3: RNCC: 3 | RNVC: 2
0541339: RNCC: 5 | RNVC: 2
QB000048: RNCC: 6 | RNVC: 9

14 May 2004

5120-14-415-4424
Socket Wrench Adapter-Extension

144154424
M4Z6021910520: RNCC: 3 | RNVC: 2

18 May 1987

5120-14-542-9388
Piston Ring Compressor

145429388
8430002: RNCC: 3 | RNVC: 2
8430002: RNCC: 5 | RNVC: 2

14 Aug 2004

5120-14-459-3266
Spanner Wrench

144593266
OS22694: RNCC: 3 | RNVC: 2
OS22694: RNCC: 5 | RNVC: 9

25 Nov 1992

5120-14-244-5545
Open End Wrench

142445545
10-7X8: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-444-3517

5120-14-443-9772

5120-14-444-3439

5120-14-408-5766
Molder's Foundry Lifter

144085766
27-02E11-1530-21: RNCC: 3 | RNVC: 2
27-02-330-11-1530-21: RNCC: 5 | RNVC: 2
2702-330A11-1530-21: RNCC: 5 | RNVC: 2
2702E11-1530-21: RNCC: 5 | RNVC: 2

2 Apr 1986

5120-14-385-3437
Maintien Ecrou Tas

143853437
6803J33-4007-00: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-488-8223
Stuffing Box And Pump Packing Extractor

144888223
366A93-3210-01: RNCC: 3 | RNVC: 2

4 Jun 1997

5120-14-508-6090
Combination Box And Open End Wrench Set

145086090
41.JE12T: RNCC: 3 | RNVC: 2
0528985: RNCC: 5 | RNVC: 2
41.JE12T: RNCC: 5 | RNVC: 2

22 Sep 1998

5120-14-451-2678
Sertissag Outillage

144512678
MMG047-11: RNCC: 3 | RNVC: 2
MMG047-11: RNCC: 5 | RNVC: 2

6 Nov 1991

5120-14-284-1935

5120-14-241-0282

5120-14-394-1898
Spanner Wrench

143941898
Z0101-943: RNCC: 3 | RNVC: 2

23 Jun 1984

5120-14-463-1419
Bearing And Bushing Inserter And Remover

144631419
50347: RNCC: 3 | RNVC: 2
85-694-9654: RNCC: 6 | RNVC: 9

26 May 1993

5120-14-249-9473
Open End Wrench

142499473
44EC16X17: RNCC: 3 | RNVC: 2
JGA12-23: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-326-0037
Flat Tip Screwdriver

143260037
FRP31: RNCC: 3 | RNVC: 2
AA7,62NF1-1679: RNCC: 5 | RNVC: 2
AA7-62NF1-1679: RNCC: 5 | RNVC: 2
85-100-7248: RNCC: 6 | RNVC: 9

2 Jul 1975

5120-14-315-5990
Socket Head Screw Key

143155990
83H.14: RNCC: 3 | RNVC: 2
63-14: RNCC: 3 | RNVC: 2
0124140: RNCC: 5 | RNVC: 2
0124141: RNCC: 5 | RNVC: 2
83-14: RNCC: 5 | RNVC: 2
83.14: RNCC: 5 | RNVC: 2
63.14: RNCC: 5 | RNVC: 2
0715 31 29: RNCC: 5 | RNVC: 2
3272670292680: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-370-9001
Detent Handling Tool

143709001
6801J34-1000-01: RNCC: 3 | RNVC: 2
6801360A34-1000-01: RNCC: 5 | RNVC: 2

5 Jun 1981

5120-14-252-9946
Spanner Wrench

142529946
3636ET4388: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-233-4354

5120-14-368-5233

5120-14-304-4537

5120-14-552-5146
Socket Wrench Handle

145525146
S.121AVSE: RNCC: 3 | RNVC: 2
3148510566566: RNCC: 5 | RNVC: 2

10 Jan 2007

5120-14-497-2690
Tournevis

144972690
84-6: RNCC: 3 | RNVC: 2
F300 0T 022 9218: RNCC: 6 | RNVC: 9

15 Oct 1997

5120-14-341-6005

5120-14-328-4718

5120-14-392-7212
Spanner Wrench

143927212
043801-614000: RNCC: 3 | RNVC: 2
0438-01-614000: RNCC: 5 | RNVC: 2

7 Apr 1984

5120-14-358-6466
Regl Chass Att Outi

143586466
M31-127: RNCC: 3 | RNVC: 2
M31127: RNCC: 5 | RNVC: 2
M31-127: RNCC: 5 | RNVC: 9

7 Sep 1979

5120-14-395-3437
Injecteu Extracteur

143953437
25545922600: RNCC: 3 | RNVC: 2
309018: RNCC: 5 | RNVC: 2
255459226: RNCC: 5 | RNVC: 9
25545922600: RNCC: 5 | RNVC: 9

2 Oct 1984

5120-14-493-0049
Cle

144930049
4065 030 000 685: RNCC: 3 | RNVC: 2
F300 0T 009 4391: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-384-6341
Electrical Card Extractor

143846341
16928968: RNCC: 3 | RNVC: 2
16928968: RNCC: 5 | RNVC: 9

2 Jun 1983

5120-14-521-7612
Cle A Crenaux

145217612
2P84539-00: RNCC: 3 | RNVC: 2

13 Sep 2000

5120-14-280-1425

5120-14-280-3192

5120-14-413-5639

5120-14-490-0618
Flat Tip Screwdriver

144900618
AZ.3,5X75: RNCC: 3 | RNVC: 2
3148510133829: RNCC: 5 | RNVC: 2
AZ-3,5X75: RNCC: 5 | RNVC: 2
176-0753: RNCC: 5 | RNVC: 2
0013382: RNCC: 5 | RNVC: 2
FACOMAZ.3,5X75: RNCC: 5 | RNVC: 9

10 Sep 1997

5120-14-391-2065
Socket Wrench Socket

143912065
0028250: RNCC: 3 | RNVC: 2
J-5/16L: RNCC: 5 | RNVC: 2
J.5/16L: RNCC: 5 | RNVC: 2
J5/16L: RNCC: 5 | RNVC: 2

1 Mar 1984

5120-14-256-1789
Socket Wrench Extension

142561789
R50: RNCC: 3 | RNVC: 2
99-250-45-019-1: RNCC: 5 | RNVC: 2
99250450191: RNCC: 5 | RNVC: 2

1 Jan 1969

5120-14-241-6062
Mandrin De Preserti

142416062
FF4X6MA: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-236-4044

5120-14-220-8534

5120-14-530-2068
Flat Tip And Cross Tip Screwdriver Set

145302068
MOD.AYVSEPB: RNCC: 3 | RNVC: 2

22 May 2002

5120-14-414-9681
Hose Strap Band Clamping Tool

144149681
7482: RNCC: 3 | RNVC: 2

26 Mar 1987

5120-14-386-9738
Appareil De Blocage

143869738
26545901700: RNCC: 3 | RNVC: 2
265459017: RNCC: 5 | RNVC: 9

24 Aug 1983

5120-14-401-6068
Monte-Joint

144016068
NO PRIMARY REF14-401-6068: RNCC: 3 | RNVC: 2
0U141343: RNCC: 5 | RNVC: 9
OU141343: RNCC: 5 | RNVC: 9

13 Jun 1985

5120-14-311-4515
Spanner Wrench

143114515
3130S95-51-071: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-374-0892
Etau Support

143740892
UFG304-22: RNCC: 3 | RNVC: 2

8 Dec 1981

5120-14-395-8910
Open End Wrench

143958910
10-24X27C: RNCC: 3 | RNVC: 2

30 Oct 1984

5120-14-370-3282
Valve Spring Compressor

143703282
5000261012: RNCC: 3 | RNVC: 2
5000261012: RNCC: 5 | RNVC: 9

18 May 1981

5120-14-454-1534
Screwdriver Bit

144541534
EP.113: RNCC: 3 | RNVC: 2
EP113: RNCC: 5 | RNVC: 2
3148510240596: RNCC: 5 | RNVC: 2
0024059: RNCC: 5 | RNVC: 9

24 Mar 1992

5120-14-420-8756
Screwdriver Bit Set And Handle

144208756
16965918: RNCC: 3 | RNVC: 2
16965918: RNCC: 5 | RNVC: 9

22 Dec 1987

5120-14-323-4745
Spanner Wrench

143234745
61789: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-330-3085
Socket Wrench Socket

143303085
F52054: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-272-8634
Communications Equipment Spring Adjuster

142728634
S1111: RNCC: 3 | RNVC: 2
S1111: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-531-7468
Socket Wrench Socket

145317468
S.21F: RNCC: 3 | RNVC: 2
3148510538303: RNCC: 5 | RNVC: 2

12 Sep 2002

5120-14-247-9639
Tournevis Bout Plat

142479639
TERR0P221-9: RNCC: 3 | RNVC: 2
RT20381: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-552-1868
Socket Wrench Screwdriver Attachment

145521868
STM.5: RNCC: 3 | RNVC: 2
STM.5: RNCC: 5 | RNVC: 2

30 Nov 2006

5120-14-428-5253
Equipee Chape

144285253
MJK3462105: RNCC: 3 | RNVC: 2

8 Dec 1988

5120-14-251-1128
Cle A Ergot

142511128
202416: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-569-0349
Mechanical Puller

145690349
F27382000: RNCC: 3 | RNVC: 2
F27382000: RNCC: 5 | RNVC: 2

1 Aug 2011

5120-14-205-7651
Auge Pour Macon

142057651
E78-052-35LITRES: RNCC: 2 | RNVC: 2
2695 950 040: RNCC: 5 | RNVC: 2

1 Jan 1964

5120-14-310-7597

Load More Results