What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.

A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Blacksmith's Punch?

A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Mechanical Finger?

A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.

A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Screwdriver And Wrench Assembly?

A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Stakeholder Bench Plate?

A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.

What is a Drill Drift?

A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.

A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Digging Bar?

A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

What is a Valve Spring Lifter?

A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.

What is a Fuse Puller?

A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.

Hand Tools, Nonedged, Nonpowered - France (FR)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by France (FR) - NCB is 14

Page 28 of 110

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by France

51	20	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - France (FR)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 16 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Pipe Vise? 19 Items: A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.
What is a Hand Vise? 25 Items: A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.
What is a Hand Hydraulic Jack? 133 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 153 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 903 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 17 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
Swage,Bottom,Blacksmith's 10 Items
What is a Hand Tube Flaring Tool? 23 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Blacksmith's Punch? 12 Items: A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.
What is a Drain Plug Wrench? 45 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 57 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 16 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 3829 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
Flatter,Blacksmith's 18 Items
Swage,Top,Blacksmith's 12 Items
What is a Pipe Wrench? 110 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 149 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 53 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
Screwdriver,Offset 54 Items
What is a Screwdriver Bit? 707 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Mechanical Finger? 25 Items: A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.
What is a Socket Wrench Socket? 1803 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 1412 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 1641 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 52 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 565 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
Jack,Push-Pull,Screw 30 Items
What is a Hand Tube Bender? 54 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 1106 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 55 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pinch Bar? 19 Items: A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.
What is a Pry Bar? 17 Items: A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.
What is a Wrecking Bar? 15 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 273 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 413 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 32 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 295 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
Face,Hammer,Inserted 25 Items
What is a Hole Sheet Metal Holder? 37 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Screwdriver And Wrench Assembly? 11 Items: A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.
What is a Hand Rivet Set? 121 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Stakeholder Bench Plate? 22 Items: A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.
What is a Drill Drift? 32 Items: A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.
What is a Tack Claw? 15 Items: A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.
Mattock 28 Items
What is a Socket Wrench Handle Bar? 108 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Stake,Sheet Metalworking 50 Items
Riveter,Blind,Hand 76 Items
What is a Hand Shovel? 43 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 98 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 30 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
What is a Digging Bar? 20 Items: A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.
Block,Dolly,Sheet Metalworking 56 Items
What is a Piston Ring Compressor? 34 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Valve Spring Lifter? 29 Items: A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.
What is a Fuse Puller? 20 Items: A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.
What is a Hand Lead Seal Press? 18 Items: A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.
What is a Hand Beading Tool? 91 Items: A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.
What is a Hand Hammer? 502 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
Head,Hand Hammer 81 Items
What is a Lamp Extractor? 76 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Tube Packing Ring Installing Tool? 29 Items: A Tube Packing Ring Installing Tool (INSTALLING TOOL,TUBE PACKING RING) is an item designed to insert packing rings on tubes within tube sheets on condensers and similar heat exchangers. In operation, the packing rings are assembled on the loading pin mandrel and are then transferred from the mandrel on to the tube by means of a tubular sleeve which slides on the mandrel.
What is a Carpenters' Pincers? 18 Items: A Carpenters' Pincers (PINCERS,CARPENTERS') is a plierlike hand tool having two opposing jaws which may have hammerlike backs. One handle has a nail or tack pulling claw, the other is shaped to form a screwdriver. The tool may contain a wire cutter. See also NIPPERS, END CUTTING and PINCERS, FARRIERS'.
What is a Trowel? 33 Items: A Trowel is a tool used for bricklaying, concrete work, plastering, linoleum laying, and masonry work. Excludes CORNER TOOL, CONCRETE.
What is a Hand Abrasive Wheel Dresser? 12 Items: A Hand Abrasive Wheel Dresser (DRESSER,ABRASIVE WHEEL,HAND) is a tool designed to remove glaze from, dress, shape, sharpen, and true solid abrasive wheels. Excludes NIB, DIAMOND, WHEEL DRESSING.
What is a Lamp Cap Extractor? 32 Items: A Lamp Cap Extractor (EXTRACTOR,LAMP CAP) is a tool specifically designed to facilitate the removal of lamp caps from switchboards, panels or indicator lamps.
What is a Rivet Bucking Bar? 51 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 86 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 277 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Woven Cable Grip? 23 Items: A Woven Cable Grip (GRIP,CABLE,WOVEN) is a braided wire device designed to clutch a bare or insulated conductor, cable or wire rope, for holding taut or drawing through conduit.
What is a Screw Thread Insert Extractor? 19 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is an Electron Tube Extractor? 18 Items: An Electron Tube Extractor (EXTRACTOR,ELECTRON TUBE) is a hand tool designed to facilitate the removal of electron tubes from electronic equipment and to avoid burning the fingers. It may be used for installing tubes.
What is a Cross Tip Screwdriver? 362 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 21 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 11 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 37 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Tool Handle Wedge? 10 Items: A Tool Handle Wedge (WEDGE,TOOL HANDLE) is excludes WEDGE, WOOD.
What is a Marlinespike? 16 Items: A Marlinespike is a metal hand tool made in the shape of a tapered pin. One end is pointed and the opposite end may be headed. The body may contain an eye for a lanyard sling, or be grooved lengthwise. Excludes CABLE PICK and FID.
What is an Aligning Punch? 272 Items: An Aligning Punch (PUNCH,ALIGNING) is a round, square, hexagonal or octagonal bodied hand tool, having a round tapered section 6-1/2 inches (165.1 mm) or more in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, DRIFT and DRIFTPIN.
What is a Drift Punch? 25 Items: A Drift Punch (PUNCH,DRIFT) is a round, square, hexagonal, or octagonal bodied hand tool, having a round tapered section 4 to 6 inches (101.6 mm to 152.4 mm) inclusive in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, ALIGNING; and DRIFTPIN.
What is a Putty Knife? 36 Items: A Putty Knife (KNIFE,PUTTY) is a hand tool with a nonedged blade fixed to a handle for laying on and smoothing putty and the like.
What is a Socket Wrench Adapter-Extension? 40 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 30 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 184 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Socket Wrench Ratchet Attachment? 47 Items: A Socket Wrench Ratchet Attachment (RATCHET ATTACHMENT,SOCKET WRENCH) is a connection for socket wrenches and handles. Consists of a ratcheting mechanism with an internal drive on one end and an external drive on the opposite end of the same size. The item is designed to permit continuous rotation of the socket in one direction without removing the socket or handle and without a complete rotation of the handle.
What is a Wrench Extension Handle? 81 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Socket Wrench Crowfoot Attachment? 155 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 33 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 43 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 48 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 2394 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 372 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 300 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 661 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 32 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand-Operated Grommet And Eyelet Press? 12 Items: A Hand-Operated Grommet And Eyelet Press (PRESS,GROMMET AND EYELET,HAND-OPERATED) is a device which punches or pierces holes and in addition fastens or sets eyelets and grommets in cloth, paper and similar material. May be used for fastening or setting rivets, lacing hooks and snaps in cloth, paper and similar material. It is hand operated by lever or screw action. See also PUNCH, EYELET, PLIER TYPE and PRESS, GROMMET AND EYELET, FOOT OPERATED.
What is a Claw Bar? 19 Items: A Claw Bar (BAR,CLAW) is before using, refer to Reference Drawing Group AG.
What is a Shock Type Wheel Stud Nut Wrench? 11 Items: A Shock Type Wheel Stud Nut Wrench (WRENCH,WHEEL STUD NUT,SHOCK TYPE) is a manually operated item designed to remove wheel stud nuts. In operation the inner nut is turned by a socket attached to a shaft on which is a loose swinging weighted handle. The weighted handle may be swung quickly to provide an impact force against the socket to loosen the seized or jammed nuts. The outer nut is held stationary by a separate hexagonal holding wrench.
What is a Drift Pin Set? 30 Items: A Drift Pin Set is a group of DRIFTPIN having different characteristics.
What is a Tire Iron? 25 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 115 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Blacksmith's Vise? 14 Items: A Blacksmith's Vise (VISE,BLACKSMITH'S) is a clamping device consisting of a mounting plate, one stationary and one manual screw actuated jaw and a supporting member extending downward from the stationary jaw to the floor. Designed to be mounted on a bench, table or the like. May include pipe holding jaws.
What is a Machinist's Vise? 64 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Clamp Base Bench Vise? 10 Items: A Clamp Base Bench Vise (VISE,BENCH,CLAMP BASE) is a clamping device consisting of a base, one stationary and one manual screw actuated jaw, and one or more guide bars or rods. Designed with an integral clamp for attaching to a bench, table, or the like. Does not include pipe holding jaws.
What is a Fixed Open End Wrench Set? 86 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Nail Set? 11 Items: A Nail Set is a round knurled, square, hexagonal or octagonal bodied hand tool having a round tapered section terminating in a cupped point. It is designed to set brad head nails below the surface by striking it a hammerlike blow. See also PUNCH, DRIVE PIN.
What is a Socket Wrench Set? 202 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is an Open End Box Wrench Set? 10 Items: An Open End Box Wrench Set (WRENCH SET,OPEN END BOX) is a group of WRENCH, OPEN END BOX having different characteristics.
What is a Combination Box And Open End Wrench Set? 72 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Box Wrench Set? 36 Items: A Box Wrench Set (WRENCH SET,BOX) is a group of box wrenches having different characteristics. It may include a HANDLE, EXTENSION WRENCH. See also WRENCH SET, COMBINATION, BOX AND OPEN END.
What is a Hot Line Stick? 26 Items: A Hot Line Stick is a hand tool consisting of a straight, round stick (pole) made of a suitable nonconductive material with a tool fixed to one end. The other end may be plain or have a butt mounting device fixed to it. Various types of attachments (hooks, rings, and bands) may be fixed to the body. It is designed for use in the repair and maintenance of live high voltage aerial lines. Excludes hot line sticks without heads.
Handle,Mattock-Pick 15 Items
What is a Wrench Kit? 73 Items: A Wrench Kit is an assortment of various types and sizes of wrenches such as SOCKET, SOCKET WRENCH; WRENCH, OPEN END, FIXED; WRENCH, BOX and the like. It may include adapter(s), ratchet(s) and the like. See also WRENCH SET (as modified.
What is a Brad Awl? 15 Items: A Brad Awl (AWL,BRAD) is a small, pointed tool used by shoemakers, saddlers, cabinetmakers, and the like for piercing small holes in wood, leather, and similar materials, and consists of a handle with a ferrule and a blade. The blade is round, terminating in a beveled, sharp straight edge and has a shank which passes through the center of the handle.
What is a Scratch Awl? 20 Items: A Scratch Awl (AWL,SCRATCH) is an item whose nominal length of blade is less than 4 inches (101.6 millimeters) and is provided with a nondetachable handle.
What is a Screw Extractor Set? 10 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 102 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
Jack,Scissors,Hand 26 Items
What is a Piston Ring Expander? 23 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
Mallet,Plastic 62 Items
Mallet,Rubber 10 Items
What is a Wood Mallet? 37 Items: A Wood Mallet (MALLET,WOOD) is excludes MALLET, CALKING; MALLET, HAWSING and MALLET, SERVING.
What is a Rack Bar Jack? 30 Items: A Rack Bar Jack (JACK,RACK BAR) is excludes JACK, BUMPER and JACK, REEL, HAND.
What is a Pneumatic Tire Valve Core Inserter And Remover? 14 Items: A Pneumatic Tire Valve Core Inserter And Remover (INSERTER AND REMOVER,PNEUMATIC TIRE VALVE CORE) is a bar of steel having a small cylindrical slotted end for removing or installing a valve core in a valve stem by a screwing motion. See also REPAIR TOOL, PNEUMATIC TIRE VALVE.
What is a Hand Tube Swaging Tool Kit? 20 Items: A Hand Tube Swaging Tool Kit (SWAGING TOOL KIT,TUBE,HAND) is a hand-operated noncutting tool consisting of one or more PUNCH, TUBE SWAGING, HAND and a tube flaring bar.
What is a Hand Tube Flaring Punch? 11 Items: A Hand Tube Flaring Punch (PUNCH,TUBE FLARING,HAND) is a noncutting tool having a shaped end or section designed to flare the ends of tubes. One type is designed to flare the ends of tubes against a tube sheet, and another to flare tube ends to mate with tube fittings. Includes punch components of FLARING TOOL, TUBE, HAND.
What is a Hose Strap Band Clamping Tool? 26 Items: A Hose Strap Band Clamping Tool (CLAMPING TOOL,STRAP BAND,HOSE) is an item designed to tension and lock metal straps around a rubber hose, and the like. It is also used to clamp and hold fittings therein.
What is a Mechanical Puller? 3073 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 470 Items
What is a Slip Joint Pliers? 84 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Brake Repair Pliers? 14 Items: A Brake Repair Pliers (PLIERS,BRAKE REPAIR) is a tool having jaws designed for use in brake repair operations, such as removing and replacing items such as keys, springs, and the like. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 226 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 12 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 81 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 56 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 15 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 11 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 29 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Cross Tip Screwdriver Set? 14 Items: A Cross Tip Screwdriver Set (SCREWDRIVER SET,CROSS TIP) is a group of SCREWDRIVER, CROSS TIP having different characteristics.
What is a Spanner Wrench Set? 18 Items: A Spanner Wrench Set (WRENCH SET,SPANNER) is a group of items under WRENCH, SPANNER having different characteristics.
What is a Drive Pin Punch Set? 31 Items: A Drive Pin Punch Set (PUNCH SET,DRIVE PIN) is a group of PUNCH, DRIVE PIN having different characteristics.
What is an Aligning Punch Set? 13 Items: An Aligning Punch Set (PUNCH SET,ALIGNING) is a group of PUNCH, ALIGNING having different characteristics. See also DRIFTPIN SET.
What is a Slugging Type Box Wrench Socket? 16 Items: A Slugging Type Box Wrench Socket (SOCKET,SLUGGING TYPE BOX WRENCH) is an item having a hexagonal external drive at one end, made to fit into the internal hexagonal or 12-point opening of a slugging type box wrench. The opposite end has a single-broached hexagonal opening of the same size as the external drive. The item is designed with extra thick walls to withstand the impact of sledge blows on the driving wrench.
What is a Mechanical Puller Step Plate? 44 Items: A Mechanical Puller Step Plate (STEP PLATE,MECHANICAL PULLER) is a circular disk, flanged to provide a shoulder, and designed to provide a base for the screw point of a PULLER, MECHANICAL when pulling externally mounted bearings, gears, and the like from hollow shafts or housings. It has a concentric, countersunk hole to accommodate the puller screw point.
What is a Solid Center Punch? 79 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Cable Type Ratchet Lever Puller? 20 Items: A Cable Type Ratchet Lever Puller (PULLER,RATCHET LEVER,CABLE TYPE) is an item consisting of a metal frame and ratchet lever reel to which is attached one end of a flexible cable (wire rope). The cable feeds through the fast eye in the metal frame, and may be reeved through a slip hook tackle hook. See also BINDER, LOAD; HOIST, WIRE ROPE and STRETCHER, WIRE.
What is an Electronic Equipment Tuning Wand? 18 Items: An Electronic Equipment Tuning Wand (TUNING WAND,ELECTRONIC EQUIPMENT) is a hand-held rod used in determining the adjustment of the windings of a radio frequency coil. It is made of insulating material with iron on one end and brass on the other end. By inserting the iron end in the coil, the inductance is increased and by inserting the brass end, the inductance is decreased.
What is a Combination Open End And Spanner Wrench? 14 Items: A Combination Open End And Spanner Wrench (WRENCH,OPEN END AND SPANNER,COMBINATION) is a tool having open end wrench characteristics at one end and spanner wrench features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s) at the other end.
What is a Detent Handling Tool? 187 Items: A Detent Handling Tool (HANDLING TOOL,DETENT) is a specially designed handling tool consisting of a rigid bar with a T-handle on one end. The other end is equipped with threads designed to mate the threads of a detent to facilitate inserting or extracting.
What is a Hand Material Handling Hook? 23 Items: A Hand Material Handling Hook (HOOK,MATERIAL HANDLING,HAND) is a hook whose curved end conforms to Style AP1, AP2, AP3 or AP4 of Reference Drawing Group AP. Excludes HOOK, MANHOLE COVER, HAND; HOOK, WIRE BREAKING, HAND; HOOK, ROCK CRUSHER FEEDING, HAND; HOOK, STRAINER REMOVING, HAND and HOOKS, BAG HANDLING, HAND.
What is a Magnetic Retrieving Tool? 11 Items: A Magnetic Retrieving Tool (RETRIEVING TOOL,MAGNETIC) is a hand-operated magnetic device used to locate and pick up metallic articles, such as bolts, nuts, pins, washers, and the like, in confined spaces. It may be rigid, flexible or adjustable. Excludes FINGER, MECHANICAL.
What is a Mechanical Puller Adapter? 78 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Combination Box And Open End Box Wrench? 13 Items: A Combination Box And Open End Box Wrench (WRENCH,BOX AND OPEN END BOX,COMBINATION) is a double end wrench, box and open end box, primarily designed for removing or replacing tube fittings. The opening in the open end box may be machined at an angle from the longitudinal center line of the wrench.
What is a Screw Thread Insert Inserter? 136 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Flat Tip Screwdriver Set? 48 Items: A Flat Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP) is a group of SCREWDRIVER, FLAT TIP having different characteristics.
What is a Terminal Crimping Tool Contact Positioner? 89 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 16 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is an Adjustable Wrench? 138 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 239 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 75 Items
Handle,Shovel 10 Items
What is a Socket Wrench Spanner Attachment? 88 Items: A Socket Wrench Spanner Attachment (SPANNER ATTACHMENT,SOCKET WRENCH) is an item having an adjustable or fixed span with pin, hook, or key type end that is used to fit and turn various size retaining rings, cover plates, plugs, couplings, and like parts. Usually designed to be driven by a male driver.
What is a Retaining Ring Installation Tool? 44 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Tacker? 16 Items: A Tacker is a hand-operated, hammerlike or gunlike item without a clincher, used to drive preformed connecting elements like pins, nails or staples through one object or piece of material into another. Excludes STAPLER (as modified).
What is a Bearing And Bushing Inserter? 290 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 207 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 939 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 14 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 93 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 161 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 94 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 141 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 53 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Six Point Tip Screwdriver? 155 Items: A Six Point Tip Screwdriver (SCREWDRIVER,SIX POINT TIP) is a manual screwdriver having a single nonremoveable blade having a tip with six rounded points.
What is a Seal Inserter And Remover? 147 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 478 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is a Preformed Packing Inserter And Remover? 34 Items: A Preformed Packing Inserter And Remover (INSERTER AND REMOVER,PREFORMED PACKING) is a hand tool designed to install and remove a PACKING, PREFORMED.
What is a Pin Remover? 34 Items: A Pin Remover (REMOVER,PIN) is a hand tool designed to facilitate the removal of a pin from a hole.
What is a Pin Inserter And Remover? 13 Items: A Pin Inserter And Remover (INSERTER AND REMOVER,PIN) is a rodlike tool designed to facilitate the insertion and removal of a pin from a hole.
What is an Electrical Contact Inserter And Remover? 37 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Piston Inserter? 40 Items: A Piston Inserter (INSERTER,PISTON) is a tool designed to permit installation of a piston or piston assembly without damaging the packings or piston.
What is a Spring Inserter And Remover? 85 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 13 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Stud Inserter? 22 Items: A Stud Inserter (INSERTER,STUD) is a device designed to drive in studs. It does not have any facilities for removing or extracting studs. See also INSERTER AND REMOVER, STUD.
What is a Stud Inserter And Remover? 17 Items: A Stud Inserter And Remover (INSERTER AND REMOVER,STUD) is a group of items designed to extract and to drive studs. It may include collets, guides, housings, holders and the like. See also REMOVER SET, STUD and INSERTER, STUD.
What is a Gear Inserter? 54 Items: A Gear Inserter (INSERTER,GEAR) is a hand tool designed to install various gears onto a gearshaft. It may be operated by a pushing or a striking force.
What is a Crimping Tool Die? 73 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is an Electrical Connector Inserter? 45 Items: An Electrical Connector Inserter (INSERTER,ELECTRICAL CONNECTOR) is a hand tool designed to hold an electrical connector, and to assist in the positioning and installation of the connector on a cover, panel or the like.
What is a Float? 12 Items: A Float is a tool used for concrete, plastering and grouting work.
What is a Mechanical Puller Set? 19 Items: A Mechanical Puller Set (PULLER SET,MECHANICAL) is two or more separate PULLER, MECHANICAL of different fixed sizes.
What is a Lifting Pneumatic Bag? 11 Items: A Lifting Pneumatic Bag (PNEUMATIC BAG,LIFTING) is a device made of flexible material designed to lift another item by being placed under the item and being inflated with air or some other gas. It will have a means of being connected to an air or gas source and may include a connector hose, a control valve and/or a pressure regulator.
What is a Cable Tie Installation Tool? 22 Items: A Cable Tie Installation Tool (INSTALLATION TOOL,CABLE TIE) is a lightweight, hand-held, hand-operated tool designed to fasten cable ties, straps and the like. Cable tie is inserted into the nose of the tool flush to the cable tie head. Trigger handle tightens cable tie and cuts off any excess. These installation tools are available in a variety of sizes depending on their intended use with miniature, intermediate, standard, heavy or extra heavy cross section ties.
What is a Bearing Staking Installation Tool? 159 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
Wrench Set,Ratchet 15 Items
What is a Sealant Dispenser? 26 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Retaining Ring Pliers Set? 10 Items: A Retaining Ring Pliers Set (PLIERS SET,RETAINING RING) is a group of PLIERS, RETAINING RING having different characteristics.
What is a Hand Armament Subsystem Carrier? 52 Items: A Hand Armament Subsystem Carrier (CARRIER,ARMAMENT SUBSYSTEM,HAND) is a metallic item with a clamp device and/or space for depositing articles. It is used for transporting weapon parts during maintanence and/or repair work, such as gun barrel, automatic loader, breechblock and the like.
What is a Ring Retaining Pliers Tip Set? 13 Items: A Ring Retaining Pliers Tip Set (TIP SET,PLIERS,RING RETAINING) is a collection of removable metallic tips in matched pairs used to provide various size capablities to PLIERS, RING RETAINING which permits the removal and installation of internal and external retaining rings.
What is a Plug Electrical Connector Extractor? 45 Items: A Plug Electrical Connector Extractor (EXTRACTOR,ELECTRICAL CONNECTOR,PLUG) is a hand tool designed to disassemble CONNECTOR, PLUG, ELECTRICAL from a CONNECTOR, RECEPTACLE, ELECTRICAL.
What is a Torque Wrench Adapter Set? 10 Items: A Torque Wrench Adapter Set (ADAPTER SET,TORQUE WRENCH) is tWO or more ADAPTER, TORQUE WRENCH of different sizes.
What is an Electronic Component Inserter And Remover? 79 Items: An Electronic Component Inserter And Remover (INSERTER AND REMOVER,ELECTRONIC COMPONENT) is an item which can insert or remove an electronic component package such as MICROCIRCUIT; RESISTOR, NETWORK (as modified); and the like from its mounting position or socket. Excludes INSERTER AND REMOVER, ELECTRICAL CONTACT; REMOVER, ELECTRICAL CONTACT; EXTRACTOR, ELECTRICAL CARD; EXTRACTOR, ELECTRONIC CRYSTAL UNIT; EXTRACTOR, ELECTRON TUBE.
What is an Impact Type Bit Set And Handle Screwdriver? 14 Items: An Impact Type Bit Set And Handle Screwdriver (SCREWDRIVER,BIT SET AND HANDLE,IMPACT TYPE) is an item consisting of a set of screwdriver bits and a impact driver to accommodate the bits of various types and characteristics. It is designed to transmit a strong rotating movement by the impact of a hammer blowed on the impact driver. It is used to loosen rusted or seized screws. Excludes SCREWDRIVER, BIT SET AND HANDLE.
What is a Hand Vise Jaw? 19 Items: A Hand Vise Jaw (JAW,VISE,HAND) is an item consisting of two opposing parts of a VISE, HAND. The item is moveable and able to open and close. It can hold, grasp or clamp work.
What is a Screwdriver Handle? 28 Items: A Screwdriver Handle (HANDLE,SCREWDRIVER) is an item used to accommodate various types of BIT, SCREWDRIVER. It is designed to rotate a bit that is used for installing or removing screws.
What is a Wire Twister Pliers? 25 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 284 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is a Mechanical Puller Body? 45 Items: A Mechanical Puller Body (BODY,PULLER,MECHANICAL) is an item designed to support and enclose the internal parts of a PULLER,MECHANICAL.
What is a Flat Tip And Cross Tip Screwdriver Set? 39 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is a Socket Wrench Screwdriver Attachment Set? 22 Items: A Socket Wrench Screwdriver Attachment Set (SCREWDRIVER ATTACHMENT SET,SOCKET WRENCH) is a set of screwdriver attachment, socket wrench of different sizes. Items consist of a female square drive on one end to attach to a handle, socket wrench and various screwdriver tip configurations on the opposite end. Excludes SCREWDRIVER ATTACHMENT,SOCKET WRENCH
What is an Oil Filter Wrench? 44 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 430 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Communications Equipment Spring Adjuster? 13 Items: A Communications Equipment Spring Adjuster (ADJUSTER,SPRING,COMMUNICATIONS EQUIPMENT) is a single or double end tool, equipped with slot(s) of various dimensions or with cylindrical rod(s), used for adjusting the springs or spring tensioned parts of electronic equipment.
What is a Rotating Members Aligning Tool? 32 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
What is a Final Drive Assembly Alignment Pin? 41 Items: A Final Drive Assembly Alignment Pin (ALIGNMENT PIN,FINAL DRIVE ASSEMBLY) is a special designed pin used in the assembling of the final drive.
Arm,Handling Tool 77 Items
What is a Splicing Sleeve Compressing Tool? 23 Items: A Splicing Sleeve Compressing Tool (COMPRESSING TOOL,SPLICING SLEEVE) is a hand tool having hinged leverage handles similar to a CUTTER, BOLT or pliers, designed to compress a splicing sleeve when joining the ends of two conductors, or when forming an eye splice in the end of a wire rope. Excludes CRIMPING TOOL, TERMINAL, HAND.
What is a Hand Screw Jack Extension? 14 Items: A Hand Screw Jack Extension (EXTENSION,HAND SCREW JACK) is a length of externally threaded rigid shafting which is the adjustable section of a JACK, SCREW, HAND.
What is a Mechanical Puller Gear Adapter? 21 Items: A Mechanical Puller Gear Adapter (GEAR ADAPTER,PULLER,MECHANICAL) is an adapter that adapts a PULLER,MECHANICAL, to pull a certain gear.
Handle,Hydraulic Jack 18 Items
What is a Female Electrical Contact Resizing Tool? 11 Items: A Female Electrical Contact Resizing Tool (RESIZING TOOL,FEMALE ELECTRICAL CONTACT) is a tool designed to shape to a specific size, female contacts such as those used on electrical connectors, tube sockets, crystal sockets, and pin jacks.
What is a Screwdriver And Socket Wrench Combination? 13 Items: A Screwdriver And Socket Wrench Combination is a hand-tool formed into an integral unit with a socket wrench at one end and a screwdriver bit at the other end. See also SCREWDRIVER AND WRENCH ASSEMBLY.
What is a Hand Hose Fitting Swaging Tool Kit? 11 Items: A Hand Hose Fitting Swaging Tool Kit (SWAGING TOOL KIT,HOSE FITTING,HAND) is a device, hydraulically actuated by hand or power operated pump, consisting of face plate, adapter plate, finger cages, fingers, ram, bushing, and expanding mandrels combined on a single base in various functional arrangements. It is used for swaging the outside diameter of hose assembly fittings, expanding the inside diameter of hose assemblies, and securing the fabrication of hose assemblies. Included are a hand or power operated pump, lubricant, cases, and trays.
What is a Catch Lever Tool? 12 Items: A Catch Lever Tool (LEVER TOOL,CATCH) is a specially designed hand tool which engages the opening and closing lever of a CATCH (as modified) for ease of operation. It is constructed of thin rigid material, usually flat, and one end has an engaging tongue.
What is a Manual Impact Wrench? 11 Items: A Manual Impact Wrench (WRENCH,IMPACT,MANUAL) is a manually operated handheld tool consisting of spring-loaded handle and a power-impact head which delivers a torsional impact from either continuous movement of the handle in one direction, or by a reciprocating action. It is used in tightening and loosening fasteners, such as bolts, nuts, and the like. The item may include sockets, extensions and offset fittings, nut runners, and the like.
What is a Drift? 63 Items: A Drift is an item consisting of a tubular body fitted with replaceable tips. It is designed to insert or remove mechanical components where space is restricted.
What is a Nutdriver? 46 Items: A Nutdriver is a non-powered hand tool with a screwdriver style handle, shaft and formed female hex or square socket at driving end.
What is a Locking Device Removal Tool? 12 Items: A Locking Device Removal Tool (REMOVAL TOOL,LOCKING DEVICE) is a hand tool designed to facilitate the removal of a WASHER, KEY and a LOCKING PLATE, NUT AND BOLT.
What is a Hydraulic Fitting Crimping Tool Head? 26 Items: A Hydraulic Fitting Crimping Tool Head (HEAD,CRIMPING TOOL,HYDRAULIC FITTING) is a component of a crimping tool used to compress fittings on fluid tubes. It consists of a U-shape item, in which, are mounted different sizes of DIE, CRIMPING TOOL for tubes of various diameters.
What is a Torque Screwdriver? 11 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.
What is a Special Purpose Combination Wrench? 13 Items: A Special Purpose Combination Wrench (WRENCH,COMBINATION,SPECIAL PURPOSE) is a tool having a combination of ends and facets. The ends may have open end, box or spanner characteristics. The sides may have features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s). Designed to fit specific items, not sized as standard or metric.
What is a Screwdriver Bit Holder? 56 Items: A Screwdriver Bit Holder (HOLDER,SCREWDRIVER BIT) is an attachment with a socket end for accepting male hexagon shank insert bits and a drive end for adapting to a portable power or hand tool.
What is a Telescoping Pole? 16 Items: A Telescoping Pole (POLE,TELESCOPING) is an item which is designed to be extended or compressed by the sliding of overlapping sections. This item may or may not be able to accommodate an extension.

Stock Items From Supply Class 5120 Page 28 of 110

5120-14-219-2916
Wrench Extension Handle

142192916
RACRPM: RNCC: 3 | RNVC: 2
RACRPM: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-271-6099
Open End Wrench

142716099
E74301C45WWF: RNCC: 2 | RNVC: 1

1 Jan 1970

5120-14-421-2669
Tubing Pinch-Off Tool

144212669
2041247: RNCC: 3 | RNVC: 2
1930: RNCC: 5 | RNVC: 2
2041247: RNCC: 5 | RNVC: 2

12 Jan 1988

5120-14-536-1278
Mattock

145361278
36402681: RNCC: 3 | RNVC: 2

9 Jul 2003

5120-14-572-8440
Socket Wrench Socket

145728440
120008: RNCC: 3 | RNVC: 2
7612206012300: RNCC: 5 | RNVC: 2

13 Aug 2012

5120-14-280-3264
Rodoir

142803264
403682T: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-031-7531

5120-14-277-0276
Mandrin De Montage

142770276
521107: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-459-5097
Poignee Mont Piston

144595097
14189510F: RNCC: 3 | RNVC: 2

9 Dec 1992

5120-14-563-4709
Spanner Wrench

145634709
O109398: RNCC: 3 | RNVC: 2

10 Feb 2010

5120-14-493-0034
Pochoir

144930034
4063 791 110 090: RNCC: 3 | RNVC: 2
F300 0T 009 4362: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-442-2402
Cone D'emmanchement

144422402
H47005: RNCC: 3 | RNVC: 2

3 Oct 1990

5120-14-217-2705

5120-14-486-5673
Montage

144865673
RT21774: RNCC: 3 | RNVC: 2

25 Mar 1997

5120-14-281-5048

5120-14-253-9431
Cle Pour Ecrou Ec1

142539431
2594439: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-570-1878
Socket Wrench

145701878
UFA33265: RNCC: 3 | RNVC: 2

25 Nov 2011

5120-14-516-8062
Poussoir

145168062
5001008871: RNCC: 3 | RNVC: 2

18 Oct 1999

5120-14-576-1110
Ratchet Wrench

145761110
467S.10: RNCC: 3 | RNVC: 2
3148518197298: RNCC: 5 | RNVC: 2
819729: RNCC: 5 | RNVC: 2

30 May 2013

5120-14-354-9410

5120-14-491-8561
Cle

144918561
416360482821: RNCC: 3 | RNVC: 2
F300 0T 005 1363: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-572-1676
Drill Guide

145721676
81109596: RNCC: 3 | RNVC: 2

12 Jun 2012

5120-14-531-4222
Hand Blind Riveter

145314222
PINCE: RNCC: 3 | RNVC: 2

20 Aug 2002

5120-14-401-2571
Gousset

144012571
205989: RNCC: 3 | RNVC: 2

5 Jun 1985

5120-14-457-9821
Reglage Appareil

144579821
600113: RNCC: 3 | RNVC: 2
600113: RNCC: 5 | RNVC: 2
F300 0T 012 1641: RNCC: 6 | RNVC: 9

2 Oct 1992

5120-14-565-5300
Blade Watchcase Opener

145655300
100141: RNCC: 3 | RNVC: 2

30 Aug 2010

5120-14-225-5589
Extracteur De Culas

142255589
42000: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-204-2992
Embout Special

142042992
M152A: RNCC: 3 | RNVC: 2
M152A: RNCC: 5 | RNVC: 2
M152A: RNCC: 5 | RNVC: 2

1 Jan 1963

5120-14-245-8172

5120-14-417-4610
Fixation Support

144174610
1724709: RNCC: 3 | RNVC: 9

8 Jul 1987

5120-14-573-4694
Oil Filter Wrench

145734694
14400271T: RNCC: 3 | RNVC: 2

16 Oct 2012

5120-14-443-3308
Sertissag Outillage

144433308
MMG070B41: RNCC: 3 | RNVC: 2
MMG070B41: RNCC: 5 | RNVC: 2

14 Nov 1990

5120-14-393-9398

5120-14-490-8770
Cle

144908770
4065 030 010 003: RNCC: 3 | RNVC: 2
F300 0T 000 5028: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-465-5991
Flat Tip Screwdriver

144655991
0010935: RNCC: 3 | RNVC: 2
1063744N00: RNCC: 5 | RNVC: 2

4 Oct 1993

5120-14-491-0127
Cle

144910127
4602 007 200 046: RNCC: 3 | RNVC: 2
F300 0T 001 0913: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-387-6682
Cle Speciale

143876682
8812801003: RNCC: 3 | RNVC: 2

12 Oct 1983

5120-14-342-7159

5120-14-565-4000
Mechanical Puller

145654000
TM1253G001: RNCC: 3 | RNVC: 2

13 Aug 2010

5120-14-376-0340
Cimblot De Compress

143760340
8813671000: RNCC: 3 | RNVC: 2

30 Mar 1982

5120-14-217-2659

5120-14-234-4264

5120-14-369-6952

5120-14-396-1773
Centr Monta Mandrin

143961773
5000261164: RNCC: 3 | RNVC: 2
5000261164: RNCC: 5 | RNVC: 9

27 Nov 1984

5120-14-200-2698
Cle De Carter De Pe

142002698
AMG45424: RNCC: 3 | RNVC: 2

1 Jan 1962

5120-14-314-2328
Spanner Wrench

143142328
160-888055: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-516-9022
Screwdriver Bit

145169022
ETRI.101: RNCC: 3 | RNVC: 2

20 Oct 1999

5120-14-284-5090
Socket Head Screw Key

142845090
T0120BBF5APL10: RNCC: 3 | RNVC: 2
403663T: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-569-8664
Flat Tip And Cross Tip Screwdriver Set

145698664
MODM.A4PB: RNCC: 3 | RNVC: 2

25 Oct 2011

5120-14-448-2609
Usinee Cle

144482609
405159: RNCC: 3 | RNVC: 2
405159: RNCC: 5 | RNVC: 9

18 Jun 1991

5120-14-205-9828
Bloc De Presertissa

142059828
PSF6K: RNCC: 3 | RNVC: 2
A116PS: RNCC: 5 | RNVC: 2
RT3591: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-416-7498
Metallique Jet

144167498
537259: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-519-4577
Outillage D'extract

145194577
141119301: RNCC: 3 | RNVC: 2

21 Mar 2000

5120-14-300-2719
Rupteur Standard

5120-14-200-9309

5120-14-208-9857
Open End Wrench

142089857
69-80: RNCC: 3 | RNVC: 2
3272670305915: RNCC: 5 | RNVC: 2

1 Jan 1964

5120-14-280-4162
Spanner Wrench

142804162
A121891: RNCC: 3 | RNVC: 2
100067: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-424-5256
Spanner Wrench

144245256
7M472: RNCC: 3 | RNVC: 2

26 May 1988

5120-14-527-8285
Flat Tip Screwdriver

145278285
F1399214: RNCC: 3 | RNVC: 2

21 Nov 2001

5120-14-212-1060
Solid Center Punch Set

142121060
0539310: RNCC: 3 | RNVC: 2
256.JS5: RNCC: 5 | RNVC: 2
91598447: RNCC: 5 | RNVC: 2
256JS5: RNCC: 5 | RNVC: 2
0190318S00: RNCC: 5 | RNVC: 2

5 Jul 1980

5120-14-490-8810
Alene

144908810
4066 214 110 700: RNCC: 3 | RNVC: 2
F300 0T 000 5082: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-363-4643
Open End Wrench

143634643
W740M: RNCC: 3 | RNVC: 9

9 May 1980

5120-14-343-8332

5120-14-270-5264
Spanner Wrench

142705264
A09130015: RNCC: 3 | RNVC: 2
3920981: RNCC: 3 | RNVC: 2
A09130015: RNCC: 5 | RNVC: 9
F300 0T 020 6197: RNCC: 5 | RNVC: 9

1 Jan 1970

5120-14-287-8941

5120-14-259-2647
Spanner Wrench

142592647
0U12778: RNCC: 3 | RNVC: 2

1 Jan 1969

5120-14-437-5401
Spanner Wrench

144375401
0UT137: RNCC: 3 | RNVC: 2
OUT137: RNCC: 5 | RNVC: 2

7 Feb 1990

5120-14-384-6360
Electrical Card Extractor

143846360
16928982: RNCC: 3 | RNVC: 2
16928982: RNCC: 5 | RNVC: 9

2 Jun 1983

5120-14-293-4456
Hand Screw Starter

142934456
8810007026: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-361-7499
Spanner Wrench

143617499
0UT27: RNCC: 3 | RNVC: 2

20 Feb 1980

5120-14-273-8174

5120-14-526-7508
Outil D'installatio

145267508
057-0581-81: RNCC: 3 | RNVC: 2

3 Sep 2001

5120-14-567-9246
Wiring Folding Tool

145679246
261374776: RNCC: 3 | RNVC: 2

26 Apr 2011

5120-14-546-3163
Locking Device Removal Tool

145463163
GMCSRC5005: RNCC: 3 | RNVC: 2
GMCSRC5005: RNCC: 5 | RNVC: 2

23 Jun 2005

5120-14-352-8569
Spanner Wrench

143528569
0UT65: RNCC: 3 | RNVC: 2
OUT65: RNCC: 5 | RNVC: 2

14 Nov 1978

5120-14-407-4901
Hand Lead Seal Press

144074901
FD1845: RNCC: 3 | RNVC: 2
P70: RNCC: 5 | RNVC: 9

27 Feb 1986

5120-14-368-2066
Screwdriver Bit

143682066
108PAA: RNCC: 3 | RNVC: 2

20 Feb 1981

5120-14-449-4441
Screwdriver Bit

144494441
0002190: RNCC: 3 | RNVC: 2
AAME: RNCC: 5 | RNVC: 2

19 Aug 1991

5120-14-236-6350

5120-14-400-3938
Open End Wrench

144003938
10-10X11CP: RNCC: 3 | RNVC: 2
7185M10X11: RNCC: 5 | RNVC: 2
85-691-5203: RNCC: 6 | RNVC: 9

24 Apr 1985

5120-14-308-0389
Bloc De Presertissa

143080389
RPS4F2-4K: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-565-6528
Face Spanner Wrench Socket

145656528
46AM017-00-0007: RNCC: 3 | RNVC: 2

13 Sep 2010

5120-14-327-2581
Positionn Porte-Bal

143272581
DL15524B: RNCC: 3 | RNVC: 2
85-679-6510: RNCC: 6 | RNVC: 9

2 Jul 1975

5120-14-283-9292
Socket Head Screw Key

142839292
NO PRIMARY REF14-283-9292: RNCC: 3 | RNVC: 2
3170849: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-577-0024
Hand Hydraulic Jack

145770024
VER-Q90876X1N: RNCC: 3 | RNVC: 2
5120MT0200434: RNCC: 6 | RNVC: 9

29 Jul 2013

5120-14-383-0917
Montage De Percage

143830917
9970-121-282: RNCC: 3 | RNVC: 2

17 Mar 1983

5120-14-444-7573
Plaque De Guidage

144447573
NO PRIMARY REF14-444-7573: RNCC: 3 | RNVC: 2
VTR251-2P-1062: RNCC: 5 | RNVC: 9

21 Jan 1991

5120-14-534-3241
Spanner Wrench

145343241
NNM0099087640815: RNCC: 2 | RNVC: 2

19 Mar 2003

5120-14-409-2465
Socket Head Screw Key

144092465
9337: RNCC: 3 | RNVC: 2

7 May 1986

5120-14-244-9014
Open End Wrench

142449014
44S54X58: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-528-3458
Projectile Holding Tool

145283458
8034331N00: RNCC: 3 | RNVC: 2

23 Jan 2002

5120-14-341-5740
Socket Wrench Extension

143415740
RT20174A: RNCC: 3 | RNVC: 2

16 Mar 1977

5120-14-270-5265
Spanner Wrench

142705265
3920984: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-451-7985
Socket Head Screw Key

144517985
356845: RNCC: 3 | RNVC: 2
356845: RNCC: 5 | RNVC: 9

4 Dec 1991

5120-14-352-5442
Open End Wrench

143525442
0M586: RNCC: 3 | RNVC: 2
0M586: RNCC: 5 | RNVC: 2

16 Oct 1978

5120-14-518-3818
Face Spanner Wrench Socket

145183818
TC3122P002: RNCC: 3 | RNVC: 2

2 Feb 2000

5120-14-458-1436
Bearing And Bushing Remover

144581436
45056169: RNCC: 3 | RNVC: 2
45056169: RNCC: 5 | RNVC: 9

8 Oct 1992

5120-14-375-8005
Open End Wrench

143758005
16776572: RNCC: 3 | RNVC: 2

30 Mar 1982

5120-14-332-2539
Spanner Wrench

143322539
127-50B: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-273-6802
Detent Handling Tool

142736802
8810344002: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-503-0905
Socket Wrench Adapter

145030905
5236: RNCC: 3 | RNVC: 2

7 Jan 1998

5120-14-388-9201
Socket Wrench Socket

143889201
8814669000: RNCC: 3 | RNVC: 2

29 Nov 1983

5120-14-477-0691
Adjustable Wrench

144770691
T700A2799001000: RNCC: 3 | RNVC: 2

19 Jul 1995

5120-14-394-9016
Socket Wrench Screwdriver Attachment

143949016
SM11: RNCC: 3 | RNVC: 2
75SM11: RNCC: 3 | RNVC: 2
3272670227071: RNCC: 5 | RNVC: 2

2 Oct 1984

5120-14-264-9606
Spanner Wrench

142649606
0360-78: RNCC: 3 | RNVC: 2
RA360: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-261-0363
Spanner Wrench

142610363
0299-78: RNCC: 3 | RNVC: 2
RA299: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-286-7864
Screw Thread Insert Inserter

142867864
01500409000: RNCC: 3 | RNVC: 2
32240980: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-433-0300
Screw Thread Insert Inserter

144330300
0503050: RNCC: 3 | RNVC: 2

5 Jul 1989

5120-14-552-5253
Screwdriver Bit

145525253
EX.230L: RNCC: 3 | RNVC: 2
EX.230L: RNCC: 5 | RNVC: 2
3148510258232: RNCC: 5 | RNVC: 2

11 Jan 2007

5120-14-426-8434
Pliers

144268434
0411-60186: RNCC: 3 | RNVC: 2

23 Sep 1988

5120-14-502-6325
Spanner Wrench

145026325
611397850: RNCC: 3 | RNVC: 2

17 Dec 1997

5120-14-309-3063
Tampon Control Usur

143093063
8006826604: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-528-6730
Hose Strap Band Clamping Tool

145286730
P1600: RNCC: 3 | RNVC: 2
SYQ0715: RNCC: 5 | RNVC: 2

5 Feb 2002

5120-14-451-5227
Bearing And Bushing Inserter And Remover

144515227
549781: RNCC: 3 | RNVC: 2

21 Nov 1991

5120-14-375-8087
Pliers

143758087
16380904: RNCC: 3 | RNVC: 2
16380904: RNCC: 5 | RNVC: 9

30 Mar 1982

5120-14-371-1586
Body And Fender Repair Pick

143711586
877: RNCC: 3 | RNVC: 2
2695 470 17: RNCC: 5 | RNVC: 2
3148512100003: RNCC: 5 | RNVC: 2

5 Jun 1981

5120-14-398-7214
Boiler Tube Wire Brush

143987214
201B: RNCC: 3 | RNVC: 9

5 Feb 1985

5120-14-283-2511

5120-14-439-2057
Spanner Wrench

144392057
MEH161: RNCC: 3 | RNVC: 2
89231289: RNCC: 5 | RNVC: 2
89280377: RNCC: 5 | RNVC: 2

25 Apr 1990

5120-14-409-0203
Fixed Open End Wrench Set

144090203
089151708: RNCC: 3 | RNVC: 2

16 Apr 1986

5120-14-212-1414
Spanner Wrench

142121414
255009: RNCC: 3 | RNVC: 2
255009: RNCC: 5 | RNVC: 9

5 Jul 1980

5120-14-455-0150
Pin Inserter And Remover

144550150
151023: RNCC: 3 | RNVC: 2

1 May 1992

5120-14-421-3464
Spanner Wrench

144213464
537233: RNCC: 3 | RNVC: 2

14 Jan 1988

5120-14-441-8997
Flat Tip Screwdriver

144418997
1322923: RNCC: 3 | RNVC: 2

25 Sep 1990

5120-14-230-3649
Electron Tube Extractor

142303649
16170: RNCC: 3 | RNVC: 2
16170: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-490-8961
Mordach

144908961
4067 640 000 566: RNCC: 3 | RNVC: 2
F300 0T 000 5248: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-491-0112
Boite

144910112
4602 006 400 005: RNCC: 3 | RNVC: 2
F300 0T 001 0897: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-274-8323
Blacksmith's Anvil

142748323
627-80: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-245-1808

5120-14-437-5500
Detent Handling Tool

144375500
VBL1: RNCC: 3 | RNVC: 2
91505603: RNCC: 5 | RNVC: 2

7 Feb 1990

5120-14-460-7063
Socket Wrench Socket

144607063
45057841: RNCC: 3 | RNVC: 2
45057841: RNCC: 5 | RNVC: 9

4 Feb 1993

5120-14-417-1265
Hand Tube Flaring Punch

144171265
540680: RNCC: 3 | RNVC: 2

1 Jul 1987

5120-14-433-1299
Detent Handling Tool

144331299
M4Z7101943301: RNCC: 3 | RNVC: 2

11 Jul 1989

5120-14-242-1863
Spanner Wrench

142421863
K044BB18BREP1: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-288-6486
Spanner Wrench

142886486
H90R1009: RNCC: 3 | RNVC: 2
H90R1009: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-296-0127
Cable Type Ratchet Lever Puller

142960127
PULLIFT2155: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-483-8634
Spanner Wrench

144838634
0-702381: RNCC: 3 | RNVC: 2

5 Oct 1996

5120-14-410-6209
Socket Head Screw Key

144106209
139080Y: RNCC: 3 | RNVC: 2

9 Jul 1986

5120-14-402-8352
Spanner Wrench

144028352
DLP752570: RNCC: 3 | RNVC: 2

19 Jul 1985

5120-14-531-6734
Adjustable Wrench

145316734
113.10CG: RNCC: 3 | RNVC: 2
113,10CG: RNCC: 5 | RNVC: 2

11 Sep 2002

5120-14-347-2979
Open End Wrench

143472979
10-23X25CM: RNCC: 3 | RNVC: 2

19 Jan 1978

5120-14-532-6343
Socket Head Screw Key Blade

145326343
NEX.60A: RNCC: 3 | RNVC: 2

22 Nov 2002

5120-14-470-7044
Open End Wrench

144707044
10.30X32: RNCC: 3 | RNVC: 2

29 Jun 1994

5120-14-545-7820
Socket Head Screw Key

145457820
8050639W00: RNCC: 3 | RNVC: 2

12 May 2005

5120-14-505-9357
Bearing Staking Installation Tool

145059357
K117120H: RNCC: 3 | RNVC: 2

30 Mar 1998

5120-14-236-4582
Spanner Wrench

142364582
853280A: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-309-6616
Hand Terminal Crimping Tool

143096616
CA58073: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-472-3686
Body And Fender Repair Pick

144723686
871A.45: RNCC: 3 | RNVC: 2
3148512097204: RNCC: 5 | RNVC: 2
871A45: RNCC: 5 | RNVC: 2
0209720: RNCC: 5 | RNVC: 9

19 Oct 1994

5120-14-354-9454
Pneumatic Tire Valve Repair Tool

143549454
51765: RNCC: 3 | RNVC: 2
15051765: RNCC: 5 | RNVC: 2

20 Feb 1979

5120-14-325-4350

5120-14-497-5560
Cle

144975560
IF1164015: RNCC: 3 | RNVC: 9
F300 0T 023 3549: RNCC: 6 | RNVC: 9

15 Oct 1997

5120-14-398-6816
Outil De Nettoyage

143986816
16019130Y: RNCC: 3 | RNVC: 2
JDE39: RNCC: 5 | RNVC: 2

31 Jan 1985

5120-14-444-7616
Cle De Reglage

144447616
0478-200200: RNCC: 3 | RNVC: 2

21 Jan 1991

5120-14-319-4961

5120-14-395-7238

5120-14-459-5662
Mattock

144595662
795A114: RNCC: 3 | RNVC: 2

10 Dec 1992

5120-14-441-9260
Bearing And Bushing Inserter And Remover

144419260
1323: RNCC: 3 | RNVC: 2
5000261323: RNCC: 5 | RNVC: 2
F300 0T 009 9804: RNCC: 6 | RNVC: 9

26 Sep 1990

5120-14-335-9248
Face Spanner Wrench Socket

143359248
C47315: RNCC: 3 | RNVC: 2

24 Jul 1976

5120-14-220-7908
Open End Wrench

142207908
RACD23: RNCC: 3 | RNVC: 2
RACD23: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-208-7044
Pliers

142087044
31: RNCC: 3 | RNVC: 2
101343: RNCC: 5 | RNVC: 2
101343: RNCC: 5 | RNVC: 9
31: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-338-3926
Screwdriver Bit Set And Handle

143383926
AMS: RNCC: 3 | RNVC: 2
91568667: RNCC: 5 | RNVC: 2
91568667: RNCC: 5 | RNVC: 2
3148515005107: RNCC: 5 | RNVC: 2
0500510: RNCC: 5 | RNVC: 9

6 Nov 1976

5120-14-505-9333
Bearing And Bushing Inserter And Remover

145059333
H117152: RNCC: 3 | RNVC: 2

30 Mar 1998

5120-14-421-2188
Wire Twister Pliers

144212188
8811220000: RNCC: 3 | RNVC: 2

11 Jan 1988

5120-14-506-2466
Slip Joint Pliers

145062466
182A.CP: RNCC: 3 | RNVC: 2
3148511418598: RNCC: 5 | RNVC: 2

15 Apr 1998

5120-14-437-1639
Outillage De Test

144371639
27402883-6: RNCC: 3 | RNVC: 2

17 Jan 1990

5120-14-220-7913
Open End Wrench

142207913
RACD29: RNCC: 3 | RNVC: 2
RACD29: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-383-4663
Electrical Card Extractor

143834663
20198005: RNCC: 3 | RNVC: 2
20198005: RNCC: 5 | RNVC: 9

11 Apr 1983

5120-14-553-5945
Socket Wrench Socket

145535945
CC 1029: RNCC: 3 | RNVC: 2

20 Apr 2007

5120-14-349-7266
Mechanical Puller Attachment

143497266
8810381003: RNCC: 3 | RNVC: 2

22 May 1978

5120-14-253-9775
Face Spanner Wrench Socket

142539775
PR46816: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-540-5482
Hand Tube Swaging Tool Kit

145405482
2527 30: RNCC: 3 | RNVC: 2
2527100: RNCC: 5 | RNVC: 9

1 Apr 2004

5120-14-203-0045
Blacksmith's Vise

142030045
ETAUACHAUD50KG: RNCC: 3 | RNVC: 2

1 Jan 1963

5120-14-514-1316
Combination Box And Open End Wrench Set

145141316
40JE11: RNCC: 3 | RNVC: 2
91794371: RNCC: 5 | RNVC: 2
0713 301 40: RNCC: 5 | RNVC: 2

27 Apr 1999

5120-14-543-2635
Screwdriver Bit

145432635
ENH.206: RNCC: 3 | RNVC: 2

13 Oct 2004

5120-14-458-1414
Bearing Staking Installation Tool

144581414
45056077: RNCC: 3 | RNVC: 2
45056077: RNCC: 5 | RNVC: 9

8 Oct 1992

5120-14-385-9671
Spanner Wrench

143859671
139550K: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-291-8151
Socket Wrench Socket

142918151
K35L: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-434-9055
Socket Wrench Screwdriver Attachment

144349055
431058: RNCC: 3 | RNVC: 2
GESM827370: RNCC: 5 | RNVC: 2

9 Oct 1989

5120-14-473-1183
Spring Inserter And Remover

144731183
1092481A00: RNCC: 3 | RNVC: 2

7 Dec 1994

5120-14-505-9390
Preformed Packing Inserter

145059390
H117155: RNCC: 3 | RNVC: 2

30 Mar 1998

5120-14-315-1892
Outil Rodage Joint

143151892
0-701829-4: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-545-7226
Open End Wrench

145457226
56956073AA: RNCC: 3 | RNVC: 2

2 May 2005

5120-14-514-1317
Flat Tip And Cross Tip Screwdriver Set

145141317
AZJ1PB: RNCC: 3 | RNVC: 2

27 Apr 1999

5120-14-344-3878

5120-14-431-1481

5120-14-419-4101
Cle Pignon Dattaque

5120-14-529-1920
Jo Outil De Montage

5120-14-321-3791
Outillage Demontage

143213791
1500740: RNCC: 3 | RNVC: 2
1500740: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-395-7469
Deverrouillag Outil

143957469
94AM046: RNCC: 3 | RNVC: 2

30 Oct 1984

5120-14-458-8758
Socket Head Screw Key

144588758
45489889: RNCC: 3 | RNVC: 2
45489889: RNCC: 5 | RNVC: 9

5 Nov 1992

5120-14-385-9676
Spanner Wrench

143859676
139600P: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-421-1728
Screwdriver Bit

144211728
1019-3B60HRC: RNCC: 3 | RNVC: 2

6 Jan 1988

5120-14-200-3975

5120-14-452-0825
Seal Inserter And Remover

144520825
600054: RNCC: 3 | RNVC: 2

18 Dec 1991

5120-14-390-4851
Controle Pmh

143904851
DLP751150: RNCC: 3 | RNVC: 2

26 Jan 1984

5120-14-433-6106
Bearing And Bushing Inserter And Remover

144336106
8815408000: RNCC: 3 | RNVC: 2
89415028: RNCC: 5 | RNVC: 2

2 Aug 1989

5120-14-503-7583
Socket Head Screw Key

145037583
00132004: RNCC: 3 | RNVC: 2

28 Jan 1998

5120-14-446-6563
Face Spanner Wrench Socket

144466563
OUT60113: RNCC: 3 | RNVC: 2
0UT60113: RNCC: 5 | RNVC: 2

9 Apr 1991

5120-14-542-6853
Face Spanner Wrench Socket

145426853
8049731B00: RNCC: 3 | RNVC: 2

28 Jul 2004

5120-14-425-9318
Socket Head Screw Key

144259318
600301: RNCC: 3 | RNVC: 2

28 Jul 1988

5120-14-237-3720
Spanner Wrench

142373720
H90R1007: RNCC: 3 | RNVC: 2
530519: RNCC: 5 | RNVC: 2
H90R1007: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-416-1258
Flat Tip Screwdriver

144161258
10402: RNCC: 3 | RNVC: 2

3 Jun 1987

5120-14-431-7629
Seal Inserter And Remover

144317629
8813647000: RNCC: 3 | RNVC: 2

10 May 1989

5120-14-501-9841
Spanner Wrench

145019841
Z11100250: RNCC: 3 | RNVC: 2

19 Nov 1997

5120-14-502-6041
Handling Tool Arm

145026041
5010057996: RNCC: 3 | RNVC: 2

17 Dec 1997

5120-14-422-2231
Socket Head Screw Key

144222231
0373-0U115062: RNCC: 3 | RNVC: 2

24 Feb 1988

5120-14-489-7892
Screwdriver Bit

144897892
EP.131T: RNCC: 3 | RNVC: 2
3148510241487: RNCC: 5 | RNVC: 2
0614 122 51: RNCC: 5 | RNVC: 2
0024148: RNCC: 5 | RNVC: 9

19 Aug 1997

5120-14-552-1988
Six Point Tip Screwdriver

145521988
ACZXR.27X100: RNCC: 3 | RNVC: 2
ACZXR.27X100: RNCC: 5 | RNVC: 2

1 Dec 2006

5120-14-545-8236
Socket Head Screw Key

145458236
1SH41816156: RNCC: 3 | RNVC: 2

18 May 2005

5120-14-217-9947
Torque Wrench Adapter

142179947
0D011: RNCC: 3 | RNVC: 2
0D011: RNCC: 5 | RNVC: 2

1 Jan 1965

5120-14-483-8021
Spanner Wrench

144838021
8000765X00: RNCC: 3 | RNVC: 2

3 Oct 1996

5120-14-392-1370
Electrical Contact Remover

143921370
809823: RNCC: 3 | RNVC: 2
91460705: RNCC: 5 | RNVC: 2

21 Mar 1984

5120-14-385-9668
Spanner Wrench

143859668
139500F: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-250-0295
Combination Box And Open End Wrench

142500295
C55408: RNCC: 3 | RNVC: 2
100859: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-278-4679
Spanner Wrench

142784679
163053: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-270-9188
Spanner Wrench

142709188
H90R1010: RNCC: 3 | RNVC: 2
H90R1010: RNCC: 5 | RNVC: 2
530521: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-440-3013
Combination Box And Open End Wrench Set

144403013
40.JU17T: RNCC: 3 | RNVC: 2
3148515287909: RNCC: 5 | RNVC: 2
40.JU16T: RNCC: 5 | RNVC: 2
91618493: RNCC: 5 | RNVC: 2
40JU16T: RNCC: 5 | RNVC: 2
0528790: RNCC: 5 | RNVC: 9

11 Jul 1990

5120-14-460-9034
Torque Wrench Adapter Set

144609034
S.300-3: RNCC: 3 | RNVC: 2
3148515148583: RNCC: 5 | RNVC: 2
S300.3: RNCC: 5 | RNVC: 2
0514858: RNCC: 5 | RNVC: 9

15 Feb 1993

5120-14-312-9113
Outil Harmoni Canon

143129113
121E95-190-20-0: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-313-4678
Craftsman's Tweezers

143134678
152: RNCC: 3 | RNVC: 2
3148511385500: RNCC: 5 | RNVC: 2
0114282W00: RNCC: 5 | RNVC: 2
91522619: RNCC: 5 | RNVC: 2
0138550: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-230-0998
Open End Wrench

142300998
1483-34X36: RNCC: 3 | RNVC: 9

1 Jan 1967

5120-14-538-4212
Spanner Wrench

145384212
NGM0010036940403: RNCC: 2 | RNVC: 2

9 Dec 2003

5120-14-366-5545
Mechanical Puller Attachment

143665545
16849303: RNCC: 3 | RNVC: 2
16849303: RNCC: 5 | RNVC: 9

20 Nov 1980

5120-14-551-0151
Hand Tube Swaging Tool Kit

145510151
F21934: RNCC: 3 | RNVC: 2

21 Aug 2006

5120-14-552-8001
Solid Center Punch

145528001
255.G10: RNCC: 3 | RNVC: 2
3148511604588: RNCC: 5 | RNVC: 2
255.G10: RNCC: 5 | RNVC: 2

2 Feb 2007

5120-14-313-7212
Face Spanner Wrench Socket

143137212
C46607: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-425-6853
Mechanical Puller Attachment

144256853
8813213002: RNCC: 3 | RNVC: 2

21 Jul 1988

5120-14-343-5981
Piston Ring Compressor

143435981
DLT111595: RNCC: 3 | RNVC: 2
DLT111595: RNCC: 5 | RNVC: 9

16 Jun 1977

5120-14-534-3713
Piston Ring Expander

145343713
NNM0010036234048: RNCC: 2 | RNVC: 2

20 Mar 2003

5120-14-514-2107
Screw Thread Insert Inserter

145142107
01500274400: RNCC: 3 | RNVC: 2

28 Apr 1999

5120-14-240-6141

5120-14-244-4257

5120-14-212-6048
Open End Wrench

142126048
399384: RNCC: 3 | RNVC: 2

1 Jan 1964

5120-14-358-2814

5120-14-234-3693

5120-14-305-6015
Socket Wrench Screwdriver Attachment

143056015
JT.3/8: RNCC: 3 | RNVC: 2
3148515065606: RNCC: 5 | RNVC: 2
JT3-8: RNCC: 5 | RNVC: 2
0506560: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-552-1861
Socket Wrench Screwdriver Attachment

145521861
STM.19: RNCC: 3 | RNVC: 2
STM.19: RNCC: 5 | RNVC: 2

30 Nov 2006

5120-14-552-9219
Adjustable Wrench

145529219
113A.15C: RNCC: 3 | RNVC: 2
3148517037519: RNCC: 5 | RNVC: 2

13 Feb 2007

5120-14-548-1571
Mechanical Puller Attachment

145481571
8023-400Y000A: RNCC: 3 | RNVC: 2

13 Dec 2005

5120-14-276-8004
Carpenters' Pincers

142768004
E73-160-190C0UPANTE: RNCC: 2 | RNVC: 2
3272670297890: RNCC: 5 | RNVC: 2
229-19: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-455-8236
Plug Electrical Connector Extractor

144558236
4620516: RNCC: 3 | RNVC: 2
ASC1362069: RNCC: 5 | RNVC: 9

11 Jun 1992

5120-14-369-6957
Socket Head Screw Key

143696957
BB413: RNCC: 3 | RNVC: 9

17 Apr 1981

5120-14-387-8645
Guidage Segme Bague

143878645
50414: RNCC: 3 | RNVC: 2
OU50414: RNCC: 3 | RNVC: 2
0U50414: RNCC: 5 | RNVC: 2
50414: RNCC: 5 | RNVC: 9

12 Oct 1983

5120-14-421-3512
Spanner Wrench

144213512
540229: RNCC: 3 | RNVC: 2

14 Jan 1988

5120-14-233-6945

5120-14-252-0525

5120-14-368-4603

5120-14-511-0290
Screwdriver Bit

145110290
EH.103/16: RNCC: 3 | RNVC: 2
1068375F00: RNCC: 5 | RNVC: 2

25 Nov 1998

5120-14-220-8536
Cle A Bequille Spec

142208536
PR46474: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-320-7225
Cone De Montage

143207225
S16-0607-0363: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-361-8687
Spanner Wrench

143618687
MHJ112-28: RNCC: 3 | RNVC: 2
MHJ112-28: RNCC: 5 | RNVC: 2

20 Feb 1980

5120-14-486-5677
Outillage De R

144865677
RT21778: RNCC: 3 | RNVC: 2

25 Mar 1997

5120-14-362-2133
De Centrage Obus

143622133
30MS017-0000003: RNCC: 3 | RNVC: 2

20 Feb 1980

5120-14-421-1928
Conique Moyeu

144211928
ML0150104: RNCC: 3 | RNVC: 2
ML0150104: RNCC: 5 | RNVC: 2

6 Jan 1988

5120-14-220-8393
Socket Wrench Crowfoot Attachment

142208393
17-9-424: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-416-7522
Mandrin Press

144167522
537288: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-362-3369

5120-14-467-0259
Pince

5120-14-258-8281

5120-14-245-1803

5120-14-490-6986
Vise

144906986
241 V 00244 000: RNCC: 3 | RNVC: 2
F300 0T 000 1164: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-553-3339
Hand Tube Swaging Tool Kit

145533339
TE-6: RNCC: 3 | RNVC: 2

26 Mar 2007

5120-14-491-8490
Cle

144918490
417127410500: RNCC: 3 | RNVC: 2
F300 0T 005 1192: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-281-2920
Douille Torquage Ec

142812920
A0113960: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-576-6112
Mechanical Puller S

145766112
8810381002: RNCC: 3 | RNVC: 2

1 Jul 2013

5120-14-480-8622
Socket Wrench Socket

144808622
RB.1/4: RNCC: 3 | RNVC: 2
3148510533100: RNCC: 5 | RNVC: 2
0053310: RNCC: 5 | RNVC: 9

4 Apr 1996

5120-14-468-0196
Open End Wrench

144680196
7-011287-4: RNCC: 3 | RNVC: 2
7-011287-4: RNCC: 5 | RNVC: 9

8 Feb 1994

5120-14-217-9958
Torque Wrench Adapter

142179958
0C2 1-2: RNCC: 3 | RNVC: 2
0C2-1-2: RNCC: 5 | RNVC: 2

1 Jan 1965

5120-14-365-8671
Adjustable Wrench

143658671
113-1: RNCC: 3 | RNVC: 2

8 Oct 1980

5120-14-464-7347
Hand Terminal Crimping Tool

144647347
47907-1: RNCC: 3 | RNVC: 2

31 Aug 1993

5120-14-510-7144
Socket Wrench Socket

145107144
RTX.7: RNCC: 3 | RNVC: 2
0715 112 07: RNCC: 5 | RNVC: 2
RTX7: RNCC: 5 | RNVC: 9

9 Nov 1998

5120-14-041-2405

5120-14-575-8106
Mechanical Puller

145758106
TM5400G001: RNCC: 3 | RNVC: 2

3 May 2013

5120-14-417-5780
Hand Terminal Crimping Tool

144175780
575937: RNCC: 3 | RNVC: 2

15 Jul 1987

5120-14-532-4369
Socket Head Screw Key

145324369
247148: RNCC: 3 | RNVC: 2

30 Oct 2002

5120-14-353-9753
Spanner Wrench

143539753
PR47085: RNCC: 3 | RNVC: 2

16 Jan 1979

5120-14-393-0448
Flat Tip Screwdriver

143930448
246-2: RNCC: 3 | RNVC: 2
3272670302136: RNCC: 5 | RNVC: 2

12 Apr 1984

5120-14-514-3527
Detent Handling Tool

145143527
8816082002: RNCC: 3 | RNVC: 2

12 May 1999

5120-14-472-2282
Socket Head Screw Key

144722282
10093661: RNCC: 3 | RNVC: 2

12 Oct 1994

5120-14-577-4280
Woven Cable Grip

145774280
TTSBO 25: RNCC: 3 | RNVC: 2

16 Sep 2013

5120-14-549-3598
Socket Wrench Socket

145493598
31505-C43: RNCC: 3 | RNVC: 2

27 Mar 2006

5120-14-479-4280
De Retreint Bague

144794280
H47418: RNCC: 3 | RNVC: 2

10 Jan 1996

5120-14-420-8390
Socket Head Screw Key

144208390
7818: RNCC: 3 | RNVC: 2

16 Dec 1987

5120-14-365-1195
Torch And Regulator Wrench

143651195
255011: RNCC: 3 | RNVC: 2
255011: RNCC: 5 | RNVC: 9

2 Sep 1980

5120-14-283-9150
Open End Wrench

142839150
C54552: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-232-3505
Spanner Wrench

142323505
B4C309247B: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-322-5919
Open End Wrench

143225919
13-2BAX0BA: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-441-2003
Female Electrical Contact Resizing Tool

144412003
R073030004: RNCC: 3 | RNVC: 2
91711062: RNCC: 5 | RNVC: 2
73030004: RNCC: 5 | RNVC: 9

22 Aug 1990

5120-14-472-3642
Mechanical Puller Attachment

144723642
239487M: RNCC: 3 | RNVC: 2

19 Oct 1994

5120-14-505-3044
Bearing And Bushing Inserter And Remover

145053044
MMG070B29: RNCC: 3 | RNVC: 2

18 Mar 1998

5120-14-218-6733

5120-14-214-1846
Cle Pour Ecrou De F

5120-14-363-9543
Culass Cle Speciale

143639543
16380218: RNCC: 3 | RNVC: 2
16380218: RNCC: 5 | RNVC: 9

7 Aug 1980

5120-14-473-5397
Guide Blocage Disqu

144735397
7M555: RNCC: 3 | RNVC: 2

31 Dec 1994

5120-14-508-8448
Hand Blind Riveter

145088448
Y.RIV2PB: RNCC: 3 | RNVC: 2

30 Sep 1998

5120-14-468-0205
Socket Wrench Socket

144680205
7-000114-8: RNCC: 3 | RNVC: 2
7-000114-8: RNCC: 5 | RNVC: 9

8 Feb 1994

5120-14-526-2948
Outillage Soudage

145262948
60284: RNCC: 3 | RNVC: 2

18 Jul 2001

5120-14-573-2015
Socket Wrench Set

145732015
12388 81 05 01: RNCC: 3 | RNVC: 2

20 Sep 2012

5120-14-245-2255

5120-14-529-1929
Mecanique Extracteur

5120-14-426-4755

5120-14-285-4469

5120-14-488-3029
Slip Joint Pliers

144883029
176A.CPY: RNCC: 3 | RNVC: 2
0140619: RNCC: 5 | RNVC: 2
176ACPY: RNCC: 5 | RNVC: 2
3148511406199: RNCC: 5 | RNVC: 2

29 Apr 1997

5120-14-300-3837
Open End Wrench

143003837
T112A: RNCC: 3 | RNVC: 2
0000027901: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-298-1691
Flat Tip Screwdriver

142981691
77695: RNCC: 3 | RNVC: 2
77695: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-559-4830
Mechanical Puller Set

145594830
725599: RNCC: 3 | RNVC: 2

19 Jan 2009

5120-14-314-1013
Tete Striee

143141013
WA.1139: RNCC: 3 | RNVC: 2
3148510792606: RNCC: 5 | RNVC: 2
WA1139: RNCC: 5 | RNVC: 2
0079260: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-540-8368
Quick Adjusting Screw Clamp

145408368
603220: RNCC: 3 | RNVC: 2

23 Apr 2004

5120-14-532-6170
Socket Wrench Socket

145326170
SP.10081: RNCC: 3 | RNVC: 2

20 Nov 2002

5120-14-295-2572

5120-14-266-0838

5120-14-201-8785

5120-14-241-3375
Cle Speciale

142413375
PR47025: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-278-9587
Spanner Wrench

142789587
DNAR508REPB60: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-237-3181
Cle Speciale

142373181
HE60X6A: RNCC: 3 | RNVC: 2
530302: RNCC: 5 | RNVC: 2
HE60X6A: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-321-5675
Contre Clavette Sup

143215675
065-30-9005REP6: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-484-3853
Pignon Blocage Cle

144843853
OU143135: RNCC: 3 | RNVC: 2
OU143135: RNCC: 5 | RNVC: 2
OU143135: RNCC: 5 | RNVC: 9
F300 0T 020 6711: RNCC: 6 | RNVC: 9

14 Nov 1996

5120-14-247-9805
Cle De Maintien Pla

142479805
160-71961: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-375-0959
Obturateur Dhuile

143750959
02640910100: RNCC: 3 | RNVC: 2
026409101: RNCC: 5 | RNVC: 2

30 Jan 1982

5120-14-490-8702
Meche

144908702
4061 551 120 080: RNCC: 3 | RNVC: 2
F300 0T 000 4942: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-368-9299
Pate Abras Pistolet

143689299
DS4733: RNCC: 3 | RNVC: 2

10 Mar 1981

5120-14-452-6570
Adaptateur

144526570
F46173: RNCC: 3 | RNVC: 2

15 Jan 1992

5120-14-422-5954
Tracage Circo Outil

144225954
548245: RNCC: 3 | RNVC: 2

10 Mar 1988

5120-14-523-4181
Cle De Vissage

145234181
10555158: RNCC: 3 | RNVC: 2

19 Jan 2001

5120-14-307-1088
Cle Micrometre

143071088
0392-1020: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-551-5902
Socket Wrench Socket

145515902
S.8X: RNCC: 3 | RNVC: 2

6 Oct 2006

5120-14-568-2754
Socket Head Screw Key

145682754
271697634: RNCC: 3 | RNVC: 2

19 May 2011

5120-14-507-1323
Tampon De Controle

145071323
009450050P: RNCC: 3 | RNVC: 2

16 Jun 1998

5120-14-558-0362
Socket Head Screw Key

145580362
AWSH8X100: RNCC: 3 | RNVC: 2
91883623: RNCC: 5 | RNVC: 2

25 Aug 2008

5120-14-556-4019
Special Purpose Combination Wrench

145564019
08270734: RNCC: 3 | RNVC: 2

4 Mar 2008

5120-14-416-7655
Rondelle Dappui

144167655
540616: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-574-3965
Hand Hammer

145743965
260550: RNCC: 3 | RNVC: 2

16 Jan 2013

5120-14-468-0212
Socket Wrench Extension

144680212
7-000124-0: RNCC: 3 | RNVC: 2
7-000124-0: RNCC: 5 | RNVC: 9

8 Feb 1994

5120-14-548-4252
Mechanical Puller Adapter

145484252
U.49BR1: RNCC: 3 | RNVC: 2

16 Jan 2006

5120-14-377-2868
Appui De Cric

143772868
C23997000: RNCC: 3 | RNVC: 2

17 May 1982

5120-14-271-7954

5120-14-574-4301
Bearing And Bushing Inserter And Remover

145744301
8817544100: RNCC: 3 | RNVC: 2

18 Jan 2013

5120-14-242-0573
Spanner Wrench

142420573
DLP751060: RNCC: 3 | RNVC: 2
DLT001955: RNCC: 5 | RNVC: 2
DLT01955: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-542-7711
Socket Wrench Socket

145427711
PA000000AC0N: RNCC: 3 | RNVC: 2

13 Aug 2004

5120-14-533-4950
Torque Wrench Adapter

145334950
47067684: RNCC: 3 | RNVC: 2

5 Feb 2003

5120-14-260-4019

5120-14-249-3721

5120-14-552-5141
Bearing And Bushing Inserter And Remover

145525141
U.49AD10: RNCC: 3 | RNVC: 2
3148510702483: RNCC: 5 | RNVC: 2
U.49AD10: RNCC: 5 | RNVC: 2

10 Jan 2007

5120-14-309-6516
Chasse-Axes Pistons

143096516
571T: RNCC: 3 | RNVC: 9
MUL571T: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-276-7014
Compresseur Ressort

142767014
0816-78: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-537-4913
Spring Inserter And Remover

145374913
9401LOP130: RNCC: 3 | RNVC: 2

3 Nov 2003

5120-14-323-4740
Spanner Wrench

143234740
61456: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-398-3086
Flat Tip Screwdriver

143983086
14000707: RNCC: 3 | RNVC: 2

31 Jan 1985

5120-14-440-3507
Open End Wrench

144403507
167525: RNCC: 3 | RNVC: 2

11 Jul 1990

5120-14-319-4343
Spanner Wrench

143194343
0-76709: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-235-3901
Socket Wrench Handle

142353901
M226: RNCC: 3 | RNVC: 2
SYQ0075: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-466-3705
Spanner Wrench

144663705
61AM003: RNCC: 3 | RNVC: 2

3 Nov 1993

5120-14-530-5261
Face Spanner Wrench Socket

145305261
SP.8164: RNCC: 3 | RNVC: 2
3148519952889: RNCC: 5 | RNVC: 2

18 Jun 2002

5120-14-522-2432
Bearing Staking Installation Tool

145222432
TC3034G001: RNCC: 3 | RNVC: 2
8815252000: RNCC: 5 | RNVC: 2

11 Oct 2000

5120-14-461-0143
Seal Inserter And Remover

144610143
45057982: RNCC: 3 | RNVC: 2
45057982: RNCC: 5 | RNVC: 9

17 Feb 1993

5120-14-363-0005
Open End Wrench

143630005
185839: RNCC: 3 | RNVC: 2

3 Apr 1980

5120-14-329-8314
Torque Wrench Adapter

143298314
RT13878: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-431-7628
Seal Inserter And Remover

144317628
8812222000: RNCC: 3 | RNVC: 2

10 May 1989

5120-14-256-8888
Spanner Wrench

142568888
PR47696: RNCC: 3 | RNVC: 2

1 Jan 1969

5120-14-546-0341
Combination Box And Open End Wrench

145460341
40.22LA: RNCC: 3 | RNVC: 2

7 Jun 2005

5120-14-505-9366
Preformed Packing Inserter

145059366
H117121A: RNCC: 3 | RNVC: 2

30 Mar 1998

5120-14-542-4808
Screwdriver Bit Holder

145424808
8044193P00: RNCC: 3 | RNVC: 2

21 Jul 2004

5120-14-374-6788
Spanner Wrench

143746788
STAS18A: RNCC: 3 | RNVC: 2

30 Jan 1982

5120-14-389-8328
Linear Actuating Cylinder Assembly

143898328
26545910800: RNCC: 3 | RNVC: 2
265459108: RNCC: 5 | RNVC: 2
265459108: RNCC: 5 | RNVC: 9

20 Dec 1983

5120-14-273-7717
Flat Tip Screwdriver

142737717
FR41: RNCC: 3 | RNVC: 2
246-8: RNCC: 3 | RNVC: 2
3272670266247: RNCC: 5 | RNVC: 2
1.11.41: RNCC: 5 | RNVC: 2
SYQ0862: RNCC: 5 | RNVC: 2
2695 111 41: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-417-4629
Guidage Vis

144174629
1824704: RNCC: 3 | RNVC: 9

8 Jul 1987

5120-14-417-1296
Socket Wrench Socket

144171296
548706: RNCC: 3 | RNVC: 2

1 Jul 1987

5120-14-247-9244
Extracteur Special

142479244
2-04054: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-249-6760
Extracteur Special

142496760
2-02525: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-281-2915
Adaptateur Depose E

142812915
A0113955: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-253-3723
Feuille De Protecti

142533723
410247M: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-239-6358

5120-14-393-4109

5120-14-454-1535
Screwdriver Bit

144541535
EP.151T: RNCC: 3 | RNVC: 2
3148510241517: RNCC: 5 | RNVC: 2
0024151: RNCC: 5 | RNVC: 9

24 Mar 1992

5120-14-383-2803
Spanner Wrench

143832803
12549652-29: RNCC: 3 | RNVC: 2

11 Apr 1983

5120-14-550-8848
Bearing And Bushing Remover

145508848
TM0248G001: RNCC: 3 | RNVC: 2

26 Jul 2006

5120-14-329-5949
Face Spanner Wrench Socket

143295949
C47395: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-550-6372
Flat Tip Screwdriver

145506372
AR.10X150AVSE: RNCC: 3 | RNVC: 2
AR.10X150AVSE: RNCC: 5 | RNVC: 2
3148510103624: RNCC: 5 | RNVC: 2
AA010863: RNCC: 6 | RNVC: 9

4 Jul 2006

5120-14-223-8241
Spanner Wrench

142238241
939BISBV7: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-313-5814
Socket Wrench Crowfoot Attachment

143135814
C47284: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-416-0153
Hand Molder's Rammer

144160153
0140-3008A: RNCC: 3 | RNVC: 2

1 Jun 1987

5120-14-503-8739
Slip Joint Pliers

145038739
0141499: RNCC: 3 | RNVC: 2
0114322Y00: RNCC: 5 | RNVC: 2

4 Feb 1998

5120-14-499-0608
Tubing Pinch-Off Tool

144990608
F00074473: RNCC: 3 | RNVC: 2
5000824641: RNCC: 3 | RNVC: 2
F00074473: RNCC: 5 | RNVC: 9
F300 0T 016 7775: RNCC: 6 | RNVC: 9

29 Oct 1997

5120-14-212-0000

5120-14-208-6041

5120-14-423-2230
Bras Cle Dyn

144232230
0747127: RNCC: 3 | RNVC: 2
SP.1734 D-1: RNCC: 5 | RNVC: 2
SP1734D-1: RNCC: 5 | RNVC: 2

13 Apr 1988

5120-14-528-9427
Open End Wrench

145289427
8036319D00: RNCC: 3 | RNVC: 2

27 Feb 2002

5120-14-227-9422
Flat Tip Screwdriver

142279422
12506675: RNCC: 3 | RNVC: 2
12506675: RNCC: 5 | RNVC: 9

1 Jan 1966

5120-14-476-3274
Socket Wrench Socket

144763274
S.26LA: RNCC: 3 | RNVC: 2
3148510554457: RNCC: 5 | RNVC: 2
1083654L00: RNCC: 5 | RNVC: 2
0055445: RNCC: 5 | RNVC: 9

7 Jun 1995

5120-14-506-9665
Socket Head Screw Key

145069665
82H.1: RNCC: 3 | RNVC: 2
0123771: RNCC: 5 | RNVC: 2
3148511237717: RNCC: 5 | RNVC: 2

27 May 1998

5120-14-559-7940
Mechanical Puller Body

145597940
559855: RNCC: 3 | RNVC: 2
559855: RNCC: 5 | RNVC: 2

17 Feb 2009

5120-14-225-0301

5120-14-529-7485
Handling Tool Arm

145297485
COU002552050002: RNCC: 3 | RNVC: 2

9 Apr 2002

5120-14-450-0263
Flat Tip Screwdriver

144500263
45420187: RNCC: 3 | RNVC: 2
104425: RNCC: 3 | RNVC: 2
45420187: RNCC: 5 | RNVC: 9

18 Sep 1991

5120-14-537-2138
Socket Wrench Spanner Attachment

145372138
56942319AA: RNCC: 3 | RNVC: 2

14 Oct 2003

5120-14-578-1947
Mechanical Puller S

145781947
8819653001: RNCC: 3 | RNVC: 2

8 Nov 2013

5120-14-561-3414
Torque Wrench

145613414
R.306U: RNCC: 3 | RNVC: 2
3148517326231: RNCC: 5 | RNVC: 2
732623: RNCC: 5 | RNVC: 2

7 Jul 2009

5120-14-511-5894
Cross Tip Screwdriver

145115894
ACZPH.2X100: RNCC: 3 | RNVC: 2
91839639: RNCC: 5 | RNVC: 2
3148510042220: RNCC: 5 | RNVC: 2
ACPH.2X100: RNCC: 5 | RNVC: 2
0613 940 2: RNCC: 5 | RNVC: 2
4222: RNCC: 5 | RNVC: 2

6 Jan 1999

5120-14-326-8884
Socket Wrench Socket

143268884
S33: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-503-4819
Electronic Component Inserter And Remover

145034819
96136377: RNCC: 3 | RNVC: 2

14 Jan 1998

5120-14-391-4277
Body And Fender Repair Pick

143914277
905: RNCC: 3 | RNVC: 2
3148512131601: RNCC: 5 | RNVC: 2
0213160: RNCC: 5 | RNVC: 9

1 Mar 1984

5120-14-459-0572
Socket Wrench Screwdriver Attachment

144590572
RX.8: RNCC: 3 | RNVC: 2

18 Nov 1992

5120-14-282-6665
Douille A Creneaux

142826665
C46845: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-490-6940
Funnel

144906940
241 F 03565 035: RNCC: 3 | RNVC: 2
F300 0T 000 1072: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-530-5808
Bearing And Bushing Inserter And Remover

145305808
U.49AD8: RNCC: 3 | RNVC: 2
3148510702452: RNCC: 5 | RNVC: 2
U.49D8: RNCC: 5 | RNVC: 2

25 Jun 2002

5120-14-220-8546
Mordache Speciale P

142208546
PR46525: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-354-9140

5120-14-287-9101
Open End Wrench

142879101
10NC30X31: RNCC: 3 | RNVC: 2
3599059: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-513-1777
Detent Handling Tool

145131777
10427022: RNCC: 3 | RNVC: 2

9 Mar 1999

5120-14-457-9911
Socket Head Screw Key

144579911
541451: RNCC: 3 | RNVC: 2

2 Oct 1992

5120-14-511-3878
Flat Tip And Cross Tip Screwdriver Set

145113878
ASZ.3: RNCC: 3 | RNVC: 2
3148515006944: RNCC: 5 | RNVC: 2
500694: RNCC: 5 | RNVC: 2

16 Dec 1998

5120-14-490-6855
Drill

144906855
240 D 01020 000: RNCC: 3 | RNVC: 2
F300 0T 000 0959: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-282-1523
Spanner Wrench

142821523
2257-78: RNCC: 3 | RNVC: 2
RA2257: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-441-9034
Mechanical Puller Adapter

144419034
236123: RNCC: 3 | RNVC: 9

25 Sep 1990

5120-14-292-7388

5120-14-486-5679
Outillage

144865679
RT21780: RNCC: 3 | RNVC: 2

25 Mar 1997

5120-14-371-1582
Piston Ring Compressor

143711582
750.TB: RNCC: 3 | RNVC: 2
750TB: RNCC: 5 | RNVC: 2
0000045900: RNCC: 5 | RNVC: 2
101219: RNCC: 5 | RNVC: 2
3148511981108: RNCC: 5 | RNVC: 2
M0T459: RNCC: 5 | RNVC: 2
91729303: RNCC: 5 | RNVC: 2
0715 57 26: RNCC: 5 | RNVC: 2
C66485: RNCC: 5 | RNVC: 2
0198110: RNCC: 5 | RNVC: 9

5 Jun 1981

5120-14-469-9061
Open End Wrench

144699061
46.23VSE: RNCC: 3 | RNVC: 2
3148511057308: RNCC: 5 | RNVC: 2
0105730: RNCC: 5 | RNVC: 9

18 May 1994

5120-14-377-6248
Open End Wrench

143776248
10-30X32CP: RNCC: 3 | RNVC: 2

10 Jun 1982

5120-14-222-6145
Socket Wrench Socket

142226145
S.31: RNCC: 3 | RNVC: 2
3148510537306: RNCC: 5 | RNVC: 2
S31: RNCC: 5 | RNVC: 2
0053730: RNCC: 5 | RNVC: 9

1 Jan 1966

5120-14-217-9959
Torque Wrench Adapter

142179959
0C2 3-4: RNCC: 3 | RNVC: 2
0C2-3-4: RNCC: 5 | RNVC: 2

1 Jan 1965

5120-14-483-0783
Griffe Equipee

144830783
GA61857: RNCC: 3 | RNVC: 2

8 Aug 1996

5120-14-280-3948
Cle Speciale

142803948
45256: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-449-0137
Preformed Packing Inserter And Remover

144490137
76160: RNCC: 3 | RNVC: 2
89280668: RNCC: 5 | RNVC: 2

24 Jul 1991

5120-14-362-1763
Spanner Wrench

143621763
C46349M1: RNCC: 3 | RNVC: 2

20 Feb 1980

5120-14-451-1525
Craftsman's Tweezers

144511525
139: RNCC: 3 | RNVC: 2
3148511374207: RNCC: 5 | RNVC: 2

5 Nov 1991

5120-14-434-8675
Electrical Contact Inserter

144348675
0UT353B: RNCC: 3 | RNVC: 2
0UT353B: RNCC: 3 | RNVC: 9

4 Oct 1989

5120-14-449-8748
Bearing And Bushing Inserter And Remover

144498748
60717: RNCC: 3 | RNVC: 2
91705853: RNCC: 5 | RNVC: 2

11 Sep 1991

5120-14-307-7578

5120-14-255-3319

5120-14-314-8602

5120-14-331-5686
Hand Terminal Crimping Tool

143315686
PINCE 50: RNCC: 3 | RNVC: 2
50: RNCC: 5 | RNVC: 2
PINCE N% 50: RNCC: 5 | RNVC: 2
SYB0330: RNCC: 5 | RNVC: 2
20950639: RNCC: 5 | RNVC: 9

2 Jul 1975

5120-14-210-6906

5120-14-438-5688
Culbuteur Cle

144385688
C.118: RNCC: 3 | RNVC: 2
3148510164809: RNCC: 5 | RNVC: 2
C-118: RNCC: 5 | RNVC: 2
0016480: RNCC: 5 | RNVC: 9

26 Mar 1990

5120-14-289-7377
Hand Terminal Crimping Tool

142897377
R282240PR282243: RNCC: 3 | RNVC: 2
WT311: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-365-0191
Socket Wrench Socket

143650191
S.1'H: RNCC: 3 | RNVC: 2
3148510550800: RNCC: 5 | RNVC: 2
S1H: RNCC: 5 | RNVC: 2
0055080: RNCC: 5 | RNVC: 9

2 Sep 1980

5120-14-417-5777
Outil D'installatio

144175777
91104-1: RNCC: 3 | RNVC: 2

15 Jul 1987

5120-14-321-9551
Cle A Panier

143219551
GSM196-010F27: RNCC: 3 | RNVC: 2
GSM196-10F27: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-261-4510
Chasse A Parer Plat

142614510
13-70: RNCC: 3 | RNVC: 2
74791-70: RNCC: 5 | RNVC: 9
25-70SM: RNCC: 5 | RNVC: 9

1 Jan 1970

5120-14-238-2989
Socket Wrench Crowfoot Attachment

142382989
B25MM12CARRE3-8: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-332-7261
Cross Tip Screwdriver

143327261
ADB.1X40: RNCC: 3 | RNVC: 2
241PZ1: RNCC: 3 | RNVC: 2
ADB.1X40: RNCC: 5 | RNVC: 2
3148510046006: RNCC: 5 | RNVC: 2
ADB 1X40: RNCC: 5 | RNVC: 2
24101: RNCC: 5 | RNVC: 2
ADB.1: RNCC: 5 | RNVC: 9
0004600: RNCC: 5 | RNVC: 9
ADB1: RNCC: 5 | RNVC: 9

2 Jul 1975

5120-14-541-8123
Mechanical Puller Body

145418123
T947G3102224: RNCC: 3 | RNVC: 2

26 Jun 2004

5120-14-506-2483
Screwdriver Bit

145062483
END.201: RNCC: 3 | RNVC: 2
3148510238913: RNCC: 5 | RNVC: 2

15 Apr 1998

5120-14-357-5831
Douille Pour Etau

143575831
8810371016: RNCC: 3 | RNVC: 2

7 Jun 1979

5120-14-264-1570
Open End Wrench

142641570
10A2: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-398-1021
Electrical Card Extractor

143981021
14-16667655: RNCC: 3 | RNVC: 9

31 Jan 1985

5120-14-576-3261
Screwdriver Bit

145763261
899637: RNCC: 3 | RNVC: 2

12 Jun 2013

5120-14-490-9647
Cle

144909647
4389 176 445 009: RNCC: 3 | RNVC: 2
F300 0T 000 8030: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-483-0957
Face Spanner Wrench Socket

144830957
0U143318: RNCC: 3 | RNVC: 2
0U143318: RNCC: 5 | RNVC: 2
0U143318: RNCC: 5 | RNVC: 9

8 Aug 1996

5120-14-473-7203
Hand Terminal Crimping Tool

144737203
69097: RNCC: 3 | RNVC: 2

10 Jan 1995

5120-14-530-5277
Socket Wrench Socket

145305277
B000700062: RNCC: 3 | RNVC: 2

18 Jun 2002

5120-14-477-6917
Stakeholder Bench Plate

144776917
853.ST: RNCC: 3 | RNVC: 2
3148513636006: RNCC: 5 | RNVC: 2
0363600: RNCC: 5 | RNVC: 9

20 Sep 1995

5120-14-391-6455
Cross Tip Screwdriver

143916455
AD.4X200: RNCC: 3 | RNVC: 2
SYQ0738: RNCC: 5 | RNVC: 2
3148510043609: RNCC: 5 | RNVC: 2
0004360: RNCC: 5 | RNVC: 9
AD4: RNCC: 5 | RNVC: 9

21 Mar 1984

5120-14-448-9899
Socket Head Screw Key

144489899
BAZ639193: RNCC: 3 | RNVC: 2

24 Jul 1991

5120-14-494-1421
Buse

144941421
88182215: RNCC: 3 | RNVC: 2
F300 0T 015 7213: RNCC: 6 | RNVC: 9

15 Oct 1997

5120-14-237-9516

Load More Results