What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.

A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Blacksmith's Punch?

A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Mechanical Finger?

A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.

A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Screwdriver And Wrench Assembly?

A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Stakeholder Bench Plate?

A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.

What is a Drill Drift?

A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.

A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Digging Bar?

A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

What is a Valve Spring Lifter?

A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.

What is a Fuse Puller?

A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.

Hand Tools, Nonedged, Nonpowered - France (FR)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by France (FR) - NCB is 14

Page 26 of 110

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by France

51	20	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - France (FR)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 16 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Pipe Vise? 19 Items: A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.
What is a Hand Vise? 25 Items: A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.
What is a Hand Hydraulic Jack? 133 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 153 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 903 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 17 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
Swage,Bottom,Blacksmith's 10 Items
What is a Hand Tube Flaring Tool? 23 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Blacksmith's Punch? 12 Items: A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.
What is a Drain Plug Wrench? 45 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 57 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 16 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 3829 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
Flatter,Blacksmith's 18 Items
Swage,Top,Blacksmith's 12 Items
What is a Pipe Wrench? 110 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 149 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 53 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
Screwdriver,Offset 54 Items
What is a Screwdriver Bit? 707 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Mechanical Finger? 25 Items: A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.
What is a Socket Wrench Socket? 1803 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 1412 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 1641 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 52 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 565 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
Jack,Push-Pull,Screw 30 Items
What is a Hand Tube Bender? 54 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 1106 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 55 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pinch Bar? 19 Items: A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.
What is a Pry Bar? 17 Items: A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.
What is a Wrecking Bar? 15 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 273 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 413 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 32 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 295 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
Face,Hammer,Inserted 25 Items
What is a Hole Sheet Metal Holder? 37 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Screwdriver And Wrench Assembly? 11 Items: A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.
What is a Hand Rivet Set? 121 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Stakeholder Bench Plate? 22 Items: A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.
What is a Drill Drift? 32 Items: A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.
What is a Tack Claw? 15 Items: A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.
Mattock 28 Items
What is a Socket Wrench Handle Bar? 108 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Stake,Sheet Metalworking 50 Items
Riveter,Blind,Hand 76 Items
What is a Hand Shovel? 43 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 98 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 30 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
What is a Digging Bar? 20 Items: A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.
Block,Dolly,Sheet Metalworking 56 Items
What is a Piston Ring Compressor? 34 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Valve Spring Lifter? 29 Items: A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.
What is a Fuse Puller? 20 Items: A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.
What is a Hand Lead Seal Press? 18 Items: A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.
What is a Hand Beading Tool? 91 Items: A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.
What is a Hand Hammer? 502 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
Head,Hand Hammer 81 Items
What is a Lamp Extractor? 76 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Tube Packing Ring Installing Tool? 29 Items: A Tube Packing Ring Installing Tool (INSTALLING TOOL,TUBE PACKING RING) is an item designed to insert packing rings on tubes within tube sheets on condensers and similar heat exchangers. In operation, the packing rings are assembled on the loading pin mandrel and are then transferred from the mandrel on to the tube by means of a tubular sleeve which slides on the mandrel.
What is a Carpenters' Pincers? 18 Items: A Carpenters' Pincers (PINCERS,CARPENTERS') is a plierlike hand tool having two opposing jaws which may have hammerlike backs. One handle has a nail or tack pulling claw, the other is shaped to form a screwdriver. The tool may contain a wire cutter. See also NIPPERS, END CUTTING and PINCERS, FARRIERS'.
What is a Trowel? 33 Items: A Trowel is a tool used for bricklaying, concrete work, plastering, linoleum laying, and masonry work. Excludes CORNER TOOL, CONCRETE.
What is a Hand Abrasive Wheel Dresser? 12 Items: A Hand Abrasive Wheel Dresser (DRESSER,ABRASIVE WHEEL,HAND) is a tool designed to remove glaze from, dress, shape, sharpen, and true solid abrasive wheels. Excludes NIB, DIAMOND, WHEEL DRESSING.
What is a Lamp Cap Extractor? 32 Items: A Lamp Cap Extractor (EXTRACTOR,LAMP CAP) is a tool specifically designed to facilitate the removal of lamp caps from switchboards, panels or indicator lamps.
What is a Rivet Bucking Bar? 51 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 86 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 277 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Woven Cable Grip? 23 Items: A Woven Cable Grip (GRIP,CABLE,WOVEN) is a braided wire device designed to clutch a bare or insulated conductor, cable or wire rope, for holding taut or drawing through conduit.
What is a Screw Thread Insert Extractor? 19 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is an Electron Tube Extractor? 18 Items: An Electron Tube Extractor (EXTRACTOR,ELECTRON TUBE) is a hand tool designed to facilitate the removal of electron tubes from electronic equipment and to avoid burning the fingers. It may be used for installing tubes.
What is a Cross Tip Screwdriver? 362 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 21 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 11 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 37 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Tool Handle Wedge? 10 Items: A Tool Handle Wedge (WEDGE,TOOL HANDLE) is excludes WEDGE, WOOD.
What is a Marlinespike? 16 Items: A Marlinespike is a metal hand tool made in the shape of a tapered pin. One end is pointed and the opposite end may be headed. The body may contain an eye for a lanyard sling, or be grooved lengthwise. Excludes CABLE PICK and FID.
What is an Aligning Punch? 272 Items: An Aligning Punch (PUNCH,ALIGNING) is a round, square, hexagonal or octagonal bodied hand tool, having a round tapered section 6-1/2 inches (165.1 mm) or more in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, DRIFT and DRIFTPIN.
What is a Drift Punch? 25 Items: A Drift Punch (PUNCH,DRIFT) is a round, square, hexagonal, or octagonal bodied hand tool, having a round tapered section 4 to 6 inches (101.6 mm to 152.4 mm) inclusive in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, ALIGNING; and DRIFTPIN.
What is a Putty Knife? 36 Items: A Putty Knife (KNIFE,PUTTY) is a hand tool with a nonedged blade fixed to a handle for laying on and smoothing putty and the like.
What is a Socket Wrench Adapter-Extension? 40 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 30 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 184 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Socket Wrench Ratchet Attachment? 47 Items: A Socket Wrench Ratchet Attachment (RATCHET ATTACHMENT,SOCKET WRENCH) is a connection for socket wrenches and handles. Consists of a ratcheting mechanism with an internal drive on one end and an external drive on the opposite end of the same size. The item is designed to permit continuous rotation of the socket in one direction without removing the socket or handle and without a complete rotation of the handle.
What is a Wrench Extension Handle? 81 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Socket Wrench Crowfoot Attachment? 155 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 33 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 43 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 48 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 2394 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 372 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 300 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 661 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 32 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand-Operated Grommet And Eyelet Press? 12 Items: A Hand-Operated Grommet And Eyelet Press (PRESS,GROMMET AND EYELET,HAND-OPERATED) is a device which punches or pierces holes and in addition fastens or sets eyelets and grommets in cloth, paper and similar material. May be used for fastening or setting rivets, lacing hooks and snaps in cloth, paper and similar material. It is hand operated by lever or screw action. See also PUNCH, EYELET, PLIER TYPE and PRESS, GROMMET AND EYELET, FOOT OPERATED.
What is a Claw Bar? 19 Items: A Claw Bar (BAR,CLAW) is before using, refer to Reference Drawing Group AG.
What is a Shock Type Wheel Stud Nut Wrench? 11 Items: A Shock Type Wheel Stud Nut Wrench (WRENCH,WHEEL STUD NUT,SHOCK TYPE) is a manually operated item designed to remove wheel stud nuts. In operation the inner nut is turned by a socket attached to a shaft on which is a loose swinging weighted handle. The weighted handle may be swung quickly to provide an impact force against the socket to loosen the seized or jammed nuts. The outer nut is held stationary by a separate hexagonal holding wrench.
What is a Drift Pin Set? 30 Items: A Drift Pin Set is a group of DRIFTPIN having different characteristics.
What is a Tire Iron? 25 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 115 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Blacksmith's Vise? 14 Items: A Blacksmith's Vise (VISE,BLACKSMITH'S) is a clamping device consisting of a mounting plate, one stationary and one manual screw actuated jaw and a supporting member extending downward from the stationary jaw to the floor. Designed to be mounted on a bench, table or the like. May include pipe holding jaws.
What is a Machinist's Vise? 64 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Clamp Base Bench Vise? 10 Items: A Clamp Base Bench Vise (VISE,BENCH,CLAMP BASE) is a clamping device consisting of a base, one stationary and one manual screw actuated jaw, and one or more guide bars or rods. Designed with an integral clamp for attaching to a bench, table, or the like. Does not include pipe holding jaws.
What is a Fixed Open End Wrench Set? 86 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Nail Set? 11 Items: A Nail Set is a round knurled, square, hexagonal or octagonal bodied hand tool having a round tapered section terminating in a cupped point. It is designed to set brad head nails below the surface by striking it a hammerlike blow. See also PUNCH, DRIVE PIN.
What is a Socket Wrench Set? 202 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is an Open End Box Wrench Set? 10 Items: An Open End Box Wrench Set (WRENCH SET,OPEN END BOX) is a group of WRENCH, OPEN END BOX having different characteristics.
What is a Combination Box And Open End Wrench Set? 72 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Box Wrench Set? 36 Items: A Box Wrench Set (WRENCH SET,BOX) is a group of box wrenches having different characteristics. It may include a HANDLE, EXTENSION WRENCH. See also WRENCH SET, COMBINATION, BOX AND OPEN END.
What is a Hot Line Stick? 26 Items: A Hot Line Stick is a hand tool consisting of a straight, round stick (pole) made of a suitable nonconductive material with a tool fixed to one end. The other end may be plain or have a butt mounting device fixed to it. Various types of attachments (hooks, rings, and bands) may be fixed to the body. It is designed for use in the repair and maintenance of live high voltage aerial lines. Excludes hot line sticks without heads.
Handle,Mattock-Pick 15 Items
What is a Wrench Kit? 73 Items: A Wrench Kit is an assortment of various types and sizes of wrenches such as SOCKET, SOCKET WRENCH; WRENCH, OPEN END, FIXED; WRENCH, BOX and the like. It may include adapter(s), ratchet(s) and the like. See also WRENCH SET (as modified.
What is a Brad Awl? 15 Items: A Brad Awl (AWL,BRAD) is a small, pointed tool used by shoemakers, saddlers, cabinetmakers, and the like for piercing small holes in wood, leather, and similar materials, and consists of a handle with a ferrule and a blade. The blade is round, terminating in a beveled, sharp straight edge and has a shank which passes through the center of the handle.
What is a Scratch Awl? 20 Items: A Scratch Awl (AWL,SCRATCH) is an item whose nominal length of blade is less than 4 inches (101.6 millimeters) and is provided with a nondetachable handle.
What is a Screw Extractor Set? 10 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 102 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
Jack,Scissors,Hand 26 Items
What is a Piston Ring Expander? 23 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
Mallet,Plastic 62 Items
Mallet,Rubber 10 Items
What is a Wood Mallet? 37 Items: A Wood Mallet (MALLET,WOOD) is excludes MALLET, CALKING; MALLET, HAWSING and MALLET, SERVING.
What is a Rack Bar Jack? 30 Items: A Rack Bar Jack (JACK,RACK BAR) is excludes JACK, BUMPER and JACK, REEL, HAND.
What is a Pneumatic Tire Valve Core Inserter And Remover? 14 Items: A Pneumatic Tire Valve Core Inserter And Remover (INSERTER AND REMOVER,PNEUMATIC TIRE VALVE CORE) is a bar of steel having a small cylindrical slotted end for removing or installing a valve core in a valve stem by a screwing motion. See also REPAIR TOOL, PNEUMATIC TIRE VALVE.
What is a Hand Tube Swaging Tool Kit? 20 Items: A Hand Tube Swaging Tool Kit (SWAGING TOOL KIT,TUBE,HAND) is a hand-operated noncutting tool consisting of one or more PUNCH, TUBE SWAGING, HAND and a tube flaring bar.
What is a Hand Tube Flaring Punch? 11 Items: A Hand Tube Flaring Punch (PUNCH,TUBE FLARING,HAND) is a noncutting tool having a shaped end or section designed to flare the ends of tubes. One type is designed to flare the ends of tubes against a tube sheet, and another to flare tube ends to mate with tube fittings. Includes punch components of FLARING TOOL, TUBE, HAND.
What is a Hose Strap Band Clamping Tool? 26 Items: A Hose Strap Band Clamping Tool (CLAMPING TOOL,STRAP BAND,HOSE) is an item designed to tension and lock metal straps around a rubber hose, and the like. It is also used to clamp and hold fittings therein.
What is a Mechanical Puller? 3073 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 470 Items
What is a Slip Joint Pliers? 84 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Brake Repair Pliers? 14 Items: A Brake Repair Pliers (PLIERS,BRAKE REPAIR) is a tool having jaws designed for use in brake repair operations, such as removing and replacing items such as keys, springs, and the like. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 226 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 12 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 81 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 56 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 15 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 11 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 29 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Cross Tip Screwdriver Set? 14 Items: A Cross Tip Screwdriver Set (SCREWDRIVER SET,CROSS TIP) is a group of SCREWDRIVER, CROSS TIP having different characteristics.
What is a Spanner Wrench Set? 18 Items: A Spanner Wrench Set (WRENCH SET,SPANNER) is a group of items under WRENCH, SPANNER having different characteristics.
What is a Drive Pin Punch Set? 31 Items: A Drive Pin Punch Set (PUNCH SET,DRIVE PIN) is a group of PUNCH, DRIVE PIN having different characteristics.
What is an Aligning Punch Set? 13 Items: An Aligning Punch Set (PUNCH SET,ALIGNING) is a group of PUNCH, ALIGNING having different characteristics. See also DRIFTPIN SET.
What is a Slugging Type Box Wrench Socket? 16 Items: A Slugging Type Box Wrench Socket (SOCKET,SLUGGING TYPE BOX WRENCH) is an item having a hexagonal external drive at one end, made to fit into the internal hexagonal or 12-point opening of a slugging type box wrench. The opposite end has a single-broached hexagonal opening of the same size as the external drive. The item is designed with extra thick walls to withstand the impact of sledge blows on the driving wrench.
What is a Mechanical Puller Step Plate? 44 Items: A Mechanical Puller Step Plate (STEP PLATE,MECHANICAL PULLER) is a circular disk, flanged to provide a shoulder, and designed to provide a base for the screw point of a PULLER, MECHANICAL when pulling externally mounted bearings, gears, and the like from hollow shafts or housings. It has a concentric, countersunk hole to accommodate the puller screw point.
What is a Solid Center Punch? 79 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Cable Type Ratchet Lever Puller? 20 Items: A Cable Type Ratchet Lever Puller (PULLER,RATCHET LEVER,CABLE TYPE) is an item consisting of a metal frame and ratchet lever reel to which is attached one end of a flexible cable (wire rope). The cable feeds through the fast eye in the metal frame, and may be reeved through a slip hook tackle hook. See also BINDER, LOAD; HOIST, WIRE ROPE and STRETCHER, WIRE.
What is an Electronic Equipment Tuning Wand? 18 Items: An Electronic Equipment Tuning Wand (TUNING WAND,ELECTRONIC EQUIPMENT) is a hand-held rod used in determining the adjustment of the windings of a radio frequency coil. It is made of insulating material with iron on one end and brass on the other end. By inserting the iron end in the coil, the inductance is increased and by inserting the brass end, the inductance is decreased.
What is a Combination Open End And Spanner Wrench? 14 Items: A Combination Open End And Spanner Wrench (WRENCH,OPEN END AND SPANNER,COMBINATION) is a tool having open end wrench characteristics at one end and spanner wrench features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s) at the other end.
What is a Detent Handling Tool? 187 Items: A Detent Handling Tool (HANDLING TOOL,DETENT) is a specially designed handling tool consisting of a rigid bar with a T-handle on one end. The other end is equipped with threads designed to mate the threads of a detent to facilitate inserting or extracting.
What is a Hand Material Handling Hook? 23 Items: A Hand Material Handling Hook (HOOK,MATERIAL HANDLING,HAND) is a hook whose curved end conforms to Style AP1, AP2, AP3 or AP4 of Reference Drawing Group AP. Excludes HOOK, MANHOLE COVER, HAND; HOOK, WIRE BREAKING, HAND; HOOK, ROCK CRUSHER FEEDING, HAND; HOOK, STRAINER REMOVING, HAND and HOOKS, BAG HANDLING, HAND.
What is a Magnetic Retrieving Tool? 11 Items: A Magnetic Retrieving Tool (RETRIEVING TOOL,MAGNETIC) is a hand-operated magnetic device used to locate and pick up metallic articles, such as bolts, nuts, pins, washers, and the like, in confined spaces. It may be rigid, flexible or adjustable. Excludes FINGER, MECHANICAL.
What is a Mechanical Puller Adapter? 78 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Combination Box And Open End Box Wrench? 13 Items: A Combination Box And Open End Box Wrench (WRENCH,BOX AND OPEN END BOX,COMBINATION) is a double end wrench, box and open end box, primarily designed for removing or replacing tube fittings. The opening in the open end box may be machined at an angle from the longitudinal center line of the wrench.
What is a Screw Thread Insert Inserter? 136 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Flat Tip Screwdriver Set? 48 Items: A Flat Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP) is a group of SCREWDRIVER, FLAT TIP having different characteristics.
What is a Terminal Crimping Tool Contact Positioner? 89 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 16 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is an Adjustable Wrench? 138 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 239 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 75 Items
Handle,Shovel 10 Items
What is a Socket Wrench Spanner Attachment? 88 Items: A Socket Wrench Spanner Attachment (SPANNER ATTACHMENT,SOCKET WRENCH) is an item having an adjustable or fixed span with pin, hook, or key type end that is used to fit and turn various size retaining rings, cover plates, plugs, couplings, and like parts. Usually designed to be driven by a male driver.
What is a Retaining Ring Installation Tool? 44 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Tacker? 16 Items: A Tacker is a hand-operated, hammerlike or gunlike item without a clincher, used to drive preformed connecting elements like pins, nails or staples through one object or piece of material into another. Excludes STAPLER (as modified).
What is a Bearing And Bushing Inserter? 290 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 207 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 939 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 14 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 93 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 161 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 94 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 141 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 53 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Six Point Tip Screwdriver? 155 Items: A Six Point Tip Screwdriver (SCREWDRIVER,SIX POINT TIP) is a manual screwdriver having a single nonremoveable blade having a tip with six rounded points.
What is a Seal Inserter And Remover? 147 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 478 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is a Preformed Packing Inserter And Remover? 34 Items: A Preformed Packing Inserter And Remover (INSERTER AND REMOVER,PREFORMED PACKING) is a hand tool designed to install and remove a PACKING, PREFORMED.
What is a Pin Remover? 34 Items: A Pin Remover (REMOVER,PIN) is a hand tool designed to facilitate the removal of a pin from a hole.
What is a Pin Inserter And Remover? 13 Items: A Pin Inserter And Remover (INSERTER AND REMOVER,PIN) is a rodlike tool designed to facilitate the insertion and removal of a pin from a hole.
What is an Electrical Contact Inserter And Remover? 37 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Piston Inserter? 40 Items: A Piston Inserter (INSERTER,PISTON) is a tool designed to permit installation of a piston or piston assembly without damaging the packings or piston.
What is a Spring Inserter And Remover? 85 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 13 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Stud Inserter? 22 Items: A Stud Inserter (INSERTER,STUD) is a device designed to drive in studs. It does not have any facilities for removing or extracting studs. See also INSERTER AND REMOVER, STUD.
What is a Stud Inserter And Remover? 17 Items: A Stud Inserter And Remover (INSERTER AND REMOVER,STUD) is a group of items designed to extract and to drive studs. It may include collets, guides, housings, holders and the like. See also REMOVER SET, STUD and INSERTER, STUD.
What is a Gear Inserter? 54 Items: A Gear Inserter (INSERTER,GEAR) is a hand tool designed to install various gears onto a gearshaft. It may be operated by a pushing or a striking force.
What is a Crimping Tool Die? 73 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is an Electrical Connector Inserter? 45 Items: An Electrical Connector Inserter (INSERTER,ELECTRICAL CONNECTOR) is a hand tool designed to hold an electrical connector, and to assist in the positioning and installation of the connector on a cover, panel or the like.
What is a Float? 12 Items: A Float is a tool used for concrete, plastering and grouting work.
What is a Mechanical Puller Set? 19 Items: A Mechanical Puller Set (PULLER SET,MECHANICAL) is two or more separate PULLER, MECHANICAL of different fixed sizes.
What is a Lifting Pneumatic Bag? 11 Items: A Lifting Pneumatic Bag (PNEUMATIC BAG,LIFTING) is a device made of flexible material designed to lift another item by being placed under the item and being inflated with air or some other gas. It will have a means of being connected to an air or gas source and may include a connector hose, a control valve and/or a pressure regulator.
What is a Cable Tie Installation Tool? 22 Items: A Cable Tie Installation Tool (INSTALLATION TOOL,CABLE TIE) is a lightweight, hand-held, hand-operated tool designed to fasten cable ties, straps and the like. Cable tie is inserted into the nose of the tool flush to the cable tie head. Trigger handle tightens cable tie and cuts off any excess. These installation tools are available in a variety of sizes depending on their intended use with miniature, intermediate, standard, heavy or extra heavy cross section ties.
What is a Bearing Staking Installation Tool? 159 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
Wrench Set,Ratchet 15 Items
What is a Sealant Dispenser? 26 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Retaining Ring Pliers Set? 10 Items: A Retaining Ring Pliers Set (PLIERS SET,RETAINING RING) is a group of PLIERS, RETAINING RING having different characteristics.
What is a Hand Armament Subsystem Carrier? 52 Items: A Hand Armament Subsystem Carrier (CARRIER,ARMAMENT SUBSYSTEM,HAND) is a metallic item with a clamp device and/or space for depositing articles. It is used for transporting weapon parts during maintanence and/or repair work, such as gun barrel, automatic loader, breechblock and the like.
What is a Ring Retaining Pliers Tip Set? 13 Items: A Ring Retaining Pliers Tip Set (TIP SET,PLIERS,RING RETAINING) is a collection of removable metallic tips in matched pairs used to provide various size capablities to PLIERS, RING RETAINING which permits the removal and installation of internal and external retaining rings.
What is a Plug Electrical Connector Extractor? 45 Items: A Plug Electrical Connector Extractor (EXTRACTOR,ELECTRICAL CONNECTOR,PLUG) is a hand tool designed to disassemble CONNECTOR, PLUG, ELECTRICAL from a CONNECTOR, RECEPTACLE, ELECTRICAL.
What is a Torque Wrench Adapter Set? 10 Items: A Torque Wrench Adapter Set (ADAPTER SET,TORQUE WRENCH) is tWO or more ADAPTER, TORQUE WRENCH of different sizes.
What is an Electronic Component Inserter And Remover? 79 Items: An Electronic Component Inserter And Remover (INSERTER AND REMOVER,ELECTRONIC COMPONENT) is an item which can insert or remove an electronic component package such as MICROCIRCUIT; RESISTOR, NETWORK (as modified); and the like from its mounting position or socket. Excludes INSERTER AND REMOVER, ELECTRICAL CONTACT; REMOVER, ELECTRICAL CONTACT; EXTRACTOR, ELECTRICAL CARD; EXTRACTOR, ELECTRONIC CRYSTAL UNIT; EXTRACTOR, ELECTRON TUBE.
What is an Impact Type Bit Set And Handle Screwdriver? 14 Items: An Impact Type Bit Set And Handle Screwdriver (SCREWDRIVER,BIT SET AND HANDLE,IMPACT TYPE) is an item consisting of a set of screwdriver bits and a impact driver to accommodate the bits of various types and characteristics. It is designed to transmit a strong rotating movement by the impact of a hammer blowed on the impact driver. It is used to loosen rusted or seized screws. Excludes SCREWDRIVER, BIT SET AND HANDLE.
What is a Hand Vise Jaw? 19 Items: A Hand Vise Jaw (JAW,VISE,HAND) is an item consisting of two opposing parts of a VISE, HAND. The item is moveable and able to open and close. It can hold, grasp or clamp work.
What is a Screwdriver Handle? 28 Items: A Screwdriver Handle (HANDLE,SCREWDRIVER) is an item used to accommodate various types of BIT, SCREWDRIVER. It is designed to rotate a bit that is used for installing or removing screws.
What is a Wire Twister Pliers? 25 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 284 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is a Mechanical Puller Body? 45 Items: A Mechanical Puller Body (BODY,PULLER,MECHANICAL) is an item designed to support and enclose the internal parts of a PULLER,MECHANICAL.
What is a Flat Tip And Cross Tip Screwdriver Set? 39 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is a Socket Wrench Screwdriver Attachment Set? 22 Items: A Socket Wrench Screwdriver Attachment Set (SCREWDRIVER ATTACHMENT SET,SOCKET WRENCH) is a set of screwdriver attachment, socket wrench of different sizes. Items consist of a female square drive on one end to attach to a handle, socket wrench and various screwdriver tip configurations on the opposite end. Excludes SCREWDRIVER ATTACHMENT,SOCKET WRENCH
What is an Oil Filter Wrench? 44 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 430 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Communications Equipment Spring Adjuster? 13 Items: A Communications Equipment Spring Adjuster (ADJUSTER,SPRING,COMMUNICATIONS EQUIPMENT) is a single or double end tool, equipped with slot(s) of various dimensions or with cylindrical rod(s), used for adjusting the springs or spring tensioned parts of electronic equipment.
What is a Rotating Members Aligning Tool? 32 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
What is a Final Drive Assembly Alignment Pin? 41 Items: A Final Drive Assembly Alignment Pin (ALIGNMENT PIN,FINAL DRIVE ASSEMBLY) is a special designed pin used in the assembling of the final drive.
Arm,Handling Tool 77 Items
What is a Splicing Sleeve Compressing Tool? 23 Items: A Splicing Sleeve Compressing Tool (COMPRESSING TOOL,SPLICING SLEEVE) is a hand tool having hinged leverage handles similar to a CUTTER, BOLT or pliers, designed to compress a splicing sleeve when joining the ends of two conductors, or when forming an eye splice in the end of a wire rope. Excludes CRIMPING TOOL, TERMINAL, HAND.
What is a Hand Screw Jack Extension? 14 Items: A Hand Screw Jack Extension (EXTENSION,HAND SCREW JACK) is a length of externally threaded rigid shafting which is the adjustable section of a JACK, SCREW, HAND.
What is a Mechanical Puller Gear Adapter? 21 Items: A Mechanical Puller Gear Adapter (GEAR ADAPTER,PULLER,MECHANICAL) is an adapter that adapts a PULLER,MECHANICAL, to pull a certain gear.
Handle,Hydraulic Jack 18 Items
What is a Female Electrical Contact Resizing Tool? 11 Items: A Female Electrical Contact Resizing Tool (RESIZING TOOL,FEMALE ELECTRICAL CONTACT) is a tool designed to shape to a specific size, female contacts such as those used on electrical connectors, tube sockets, crystal sockets, and pin jacks.
What is a Screwdriver And Socket Wrench Combination? 13 Items: A Screwdriver And Socket Wrench Combination is a hand-tool formed into an integral unit with a socket wrench at one end and a screwdriver bit at the other end. See also SCREWDRIVER AND WRENCH ASSEMBLY.
What is a Hand Hose Fitting Swaging Tool Kit? 11 Items: A Hand Hose Fitting Swaging Tool Kit (SWAGING TOOL KIT,HOSE FITTING,HAND) is a device, hydraulically actuated by hand or power operated pump, consisting of face plate, adapter plate, finger cages, fingers, ram, bushing, and expanding mandrels combined on a single base in various functional arrangements. It is used for swaging the outside diameter of hose assembly fittings, expanding the inside diameter of hose assemblies, and securing the fabrication of hose assemblies. Included are a hand or power operated pump, lubricant, cases, and trays.
What is a Catch Lever Tool? 12 Items: A Catch Lever Tool (LEVER TOOL,CATCH) is a specially designed hand tool which engages the opening and closing lever of a CATCH (as modified) for ease of operation. It is constructed of thin rigid material, usually flat, and one end has an engaging tongue.
What is a Manual Impact Wrench? 11 Items: A Manual Impact Wrench (WRENCH,IMPACT,MANUAL) is a manually operated handheld tool consisting of spring-loaded handle and a power-impact head which delivers a torsional impact from either continuous movement of the handle in one direction, or by a reciprocating action. It is used in tightening and loosening fasteners, such as bolts, nuts, and the like. The item may include sockets, extensions and offset fittings, nut runners, and the like.
What is a Drift? 63 Items: A Drift is an item consisting of a tubular body fitted with replaceable tips. It is designed to insert or remove mechanical components where space is restricted.
What is a Nutdriver? 46 Items: A Nutdriver is a non-powered hand tool with a screwdriver style handle, shaft and formed female hex or square socket at driving end.
What is a Locking Device Removal Tool? 12 Items: A Locking Device Removal Tool (REMOVAL TOOL,LOCKING DEVICE) is a hand tool designed to facilitate the removal of a WASHER, KEY and a LOCKING PLATE, NUT AND BOLT.
What is a Hydraulic Fitting Crimping Tool Head? 26 Items: A Hydraulic Fitting Crimping Tool Head (HEAD,CRIMPING TOOL,HYDRAULIC FITTING) is a component of a crimping tool used to compress fittings on fluid tubes. It consists of a U-shape item, in which, are mounted different sizes of DIE, CRIMPING TOOL for tubes of various diameters.
What is a Torque Screwdriver? 11 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.
What is a Special Purpose Combination Wrench? 13 Items: A Special Purpose Combination Wrench (WRENCH,COMBINATION,SPECIAL PURPOSE) is a tool having a combination of ends and facets. The ends may have open end, box or spanner characteristics. The sides may have features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s). Designed to fit specific items, not sized as standard or metric.
What is a Screwdriver Bit Holder? 56 Items: A Screwdriver Bit Holder (HOLDER,SCREWDRIVER BIT) is an attachment with a socket end for accepting male hexagon shank insert bits and a drive end for adapting to a portable power or hand tool.
What is a Telescoping Pole? 16 Items: A Telescoping Pole (POLE,TELESCOPING) is an item which is designed to be extended or compressed by the sliding of overlapping sections. This item may or may not be able to accommodate an extension.

Stock Items From Supply Class 5120 Page 26 of 110

5120-14-515-8898
Seal Inserter

145158898
12701020: RNCC: 3 | RNVC: 2

24 Aug 1999

5120-14-340-0555
Mechanical Puller

143400555
14369-5014: RNCC: 3 | RNVC: 2

18 Jan 1977

5120-14-292-3218
Hand Hydraulic Jack

142923218
EP: RNCC: 3 | RNVC: 9
RASEP: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-483-8552
Box Wrench

144838552
231016: RNCC: 3 | RNVC: 2
231016: RNCC: 5 | RNVC: 2
231016: RNCC: 5 | RNVC: 9

5 Oct 1996

5120-14-386-7089
Mechanical Puller

143867089
22386844: RNCC: 3 | RNVC: 2
22386844: RNCC: 5 | RNVC: 9

24 Aug 1983

5120-14-506-4272
Drill Guide

145064272
10563170: RNCC: 3 | RNVC: 2

28 Apr 1998

5120-14-458-1439
Mechanical Puller

144581439
45215126: RNCC: 3 | RNVC: 2
45215126: RNCC: 5 | RNVC: 9

8 Oct 1992

5120-14-530-6447
Seal Inserter

145306447
D47726R3: RNCC: 3 | RNVC: 2

1 Jul 2002

5120-14-462-9829
Drift Pin Set

144629829
T700A2799000007: RNCC: 3 | RNVC: 2

12 May 1993

5120-14-450-3115
Mechanical Puller

144503115
H46688-1001: RNCC: 3 | RNVC: 2

25 Sep 1991

5120-14-206-7503
Mechanical Puller

142067503
BAG: RNCC: 3 | RNVC: 2
ZINBAG: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-447-3617
Seal Inserter

144473617
60917272: RNCC: 3 | RNVC: 2
89280538: RNCC: 5 | RNVC: 2

15 May 1991

5120-14-410-3510
Mechanical Puller

144103510
8812125000: RNCC: 3 | RNVC: 2

18 Jun 1986

5120-14-408-2455
Hand Hydraulic Jack

144082455
1689003: RNCC: 3 | RNVC: 2
FOE1689003: RNCC: 5 | RNVC: 9

19 Mar 1986

5120-14-390-4846
Mechanical Puller

143904846
DLP753460: RNCC: 3 | RNVC: 2

26 Jan 1984

5120-14-542-9420
Mechanical Puller

145429420
8370006: RNCC: 3 | RNVC: 2
8370006: RNCC: 5 | RNVC: 2

14 Aug 2004

5120-14-505-9235
Seal Inserter

145059235
D22804000004: RNCC: 3 | RNVC: 2
D22804000000004: RNCC: 5 | RNVC: 9

30 Mar 1998

5120-14-242-4817
Socket Wrench

142424817
6484700: RNCC: 3 | RNVC: 2
64847: RNCC: 3 | RNVC: 9

1 Jan 1967

5120-14-482-1186
Drive Pin Punch

144821186
25902: RNCC: 3 | RNVC: 2
1121208Y00: RNCC: 5 | RNVC: 2

20 Jun 1996

5120-14-311-1684
Socket Wrench

143111684
76.32: RNCC: 3 | RNVC: 2
3148511210406: RNCC: 5 | RNVC: 2
76-32: RNCC: 5 | RNVC: 2
2695 612 632: RNCC: 5 | RNVC: 2
251-1388: RNCC: 5 | RNVC: 2
FACOM76.32: RNCC: 5 | RNVC: 9
0121040: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-511-3839
Mechanical Puller

145113839
MGB096-22: RNCC: 3 | RNVC: 2
MGB096-22: RNCC: 5 | RNVC: 2

16 Dec 1998

5120-14-459-1606
Seal Inserter

144591606
45056118: RNCC: 3 | RNVC: 2
45056118: RNCC: 5 | RNVC: 9

19 Nov 1992

5120-14-439-1822
Seal Inserter

144391822
16788987: RNCC: 3 | RNVC: 2
16788987: RNCC: 5 | RNVC: 9

25 Apr 1990

5120-14-524-1218
Drive Pin Punch

145241218
48327421-1: RNCC: 3 | RNVC: 2
7511-183-27421-1: RNCC: 5 | RNVC: 9

2 Mar 2001

5120-14-489-3030
Driftpin

144893030
351220L: RNCC: 3 | RNVC: 2
F300 0T 021 8868: RNCC: 6 | RNVC: 9

9 Jul 1997

5120-14-548-6383
Mechanical Puller

145486383
F26640000: RNCC: 3 | RNVC: 2
F26640000: RNCC: 5 | RNVC: 2

27 Jan 2006

5120-14-485-8825
Mechanical Puller

144858825
K7739-12121: RNCC: 3 | RNVC: 2
12121: RNCC: 5 | RNVC: 2

19 Feb 1997

5120-14-527-6501
Seal Inserter

145276501
888-488-200-1: RNCC: 3 | RNVC: 2

7 Nov 2001

5120-14-435-0675
Socket Wrench

144350675
853-100-221-0: RNCC: 3 | RNVC: 2

18 Oct 1989

5120-14-283-8810
Hand Hammer

142838810
M82: RNCC: 3 | RNVC: 9

1 Jan 1972

5120-14-529-0344
Rubber Mallet

145290344
0367500201: RNCC: 3 | RNVC: 2
SYQ0888: RNCC: 5 | RNVC: 2

6 Mar 2002

5120-14-510-0405
Drain Plug Wrench

145100405
H201: RNCC: 3 | RNVC: 2
5120AA2040932: RNCC: 6 | RNVC: 9

4 Nov 1998

5120-14-457-7342
Socket Wrench

144577342
0378-38180: RNCC: 3 | RNVC: 2

17 Sep 1992

5120-14-552-0482
Socket Wrench

145520482
99C.19: RNCC: 3 | RNVC: 2
00.39.96.19: RNCC: 5 | RNVC: 2
MO003047: RNCC: 6 | RNVC: 9

22 Nov 2006

5120-14-278-7826
Socket Wrench Set

142787826
R.410AE: RNCC: 3 | RNVC: 2
3148515124006: RNCC: 5 | RNVC: 2
R.410E: RNCC: 5 | RNVC: 2
R410E: RNCC: 5 | RNVC: 2
0512400: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-549-3830
Hand Hammer

145493830
61563451AA: RNCC: 3 | RNVC: 2

28 Mar 2006

5120-14-410-7987
Hammer Handle

144107987
C7: RNCC: 3 | RNVC: 2

9 Jul 1986

5120-14-525-2710
Mechanical Puller

145252710
10552343: RNCC: 3 | RNVC: 2

23 May 2001

5120-14-544-7397
Seal Inserter

145447397
5000262562: RNCC: 3 | RNVC: 2

22 Feb 2005

5120-14-372-7623
Seal Inserter

143727623
3160S95-62-150: RNCC: 3 | RNVC: 2
3160-95-62-150: RNCC: 5 | RNVC: 2

21 Sep 1981

5120-14-425-3048
Box Wrench

144253048
199 225 07: RNCC: 3 | RNVC: 2
0195817D00: RNCC: 5 | RNVC: 2
1184-5: RNCC: 5 | RNVC: 2

30 Jun 1988

5120-14-330-1946
Box Wrench

143301946
100-27X32: RNCC: 3 | RNVC: 2
3272670238503: RNCC: 5 | RNVC: 2

2 Jul 1975

5120-14-447-3411
Hand Tube Bender

144473411
344A.8: RNCC: 3 | RNVC: 2
344A8: RNCC: 5 | RNVC: 2
91714529: RNCC: 5 | RNVC: 2
CAE00871: RNCC: 5 | RNVC: 2
0168075: RNCC: 5 | RNVC: 2
3148511680759: RNCC: 5 | RNVC: 2

15 May 1991

5120-14-448-6392
Socket Wrench

144486392
W-1894: RNCC: 3 | RNVC: 9
101 100-16: RNCC: 3 | RNVC: 9

4 Jul 1991

5120-14-486-5662
Hand Rivet Set

144865662
RT15011-1: RNCC: 3 | RNVC: 2

25 Mar 1997

5120-14-458-8427
Rivet Bucking Bar

144588427
851-910-052-0: RNCC: 3 | RNVC: 2

5 Nov 1992

5120-14-540-5480
Aligning Punch

145405480
2508 60: RNCC: 3 | RNVC: 2
2508722: RNCC: 5 | RNVC: 9

1 Apr 2004

5120-14-323-4169
Mechanical Puller

143234169
24545912600: RNCC: 3 | RNVC: 2
245459126: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-451-7979
Aligning Punch

144517979
356224: RNCC: 3 | RNVC: 2
356224: RNCC: 5 | RNVC: 9

4 Dec 1991

5120-14-328-9990
Mechanical Puller

143289990
DI2603: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-536-1122
Seal Inserter

145361122
98721: RNCC: 3 | RNVC: 2

9 Jul 2003

5120-14-247-9586
Mechanical Puller

142479586
NO PRIMARY REF14-247-9586: RNCC: 3 | RNVC: 2
RT5060: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-441-9280
Gear Inserter

144419280
2170: RNCC: 3 | RNVC: 2
5000262170: RNCC: 5 | RNVC: 2
F300 0T 009 9805: RNCC: 6 | RNVC: 9

26 Sep 1990

5120-14-432-7305
Seal Inserter

144327305
NO PRIMARY REF14-432-7305: RNCC: 3 | RNVC: 2
0U134786: RNCC: 5 | RNVC: 9
OU134786: RNCC: 5 | RNVC: 9

21 Jun 1989

5120-14-489-9793
Ratchet Wrench

144899793
OA2768: RNCC: 3 | RNVC: 2

3 Sep 1997

5120-14-505-5250
Socket Wrench

145055250
013PD09047: RNCC: 3 | RNVC: 2

19 Mar 1998

5120-14-256-7263
Hand Rivet Set

142567263
M0B228-3: RNCC: 3 | RNVC: 2
1532-3: RNCC: 5 | RNVC: 2

1 Jan 1969

5120-14-468-9815
Mechanical Puller

144689815
40N108119-3: RNCC: 3 | RNVC: 2

30 Mar 1994

5120-14-547-8128
Crimping Tool Die

145478128
DLT20PSDIS010: RNCC: 3 | RNVC: 2
DLT20PSDIS010: RNCC: 5 | RNVC: 9

16 Nov 2005

5120-14-268-8398
Wood Caulking Iron

142688398
12-8TRAVAILLANT160: RNCC: 2 | RNVC: 2

1 Jan 1970

5120-14-315-1851
Driftpin

143151851
0-51820: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-385-3107
Seal Inserter

143853107
360A93-3212-00: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-546-6309
Mechanical Puller

145466309
PE-39300: RNCC: 3 | RNVC: 2

21 Jul 2005

5120-14-262-5497
Mechanical Puller

142625497
0-62069: RNCC: 3 | RNVC: 2
062069: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-262-5496
Mechanical Puller

142625496
0-62065: RNCC: 3 | RNVC: 2
062065: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-232-5337
Open End Box Wrench

142325337
104-10X12: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-315-1844
Mechanical Puller

143151844
0-51704: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-459-1334
Ratchet Wrench

144591334
M4DZ7101955601: RNCC: 3 | RNVC: 2

19 Nov 1992

5120-14-520-6921
Hand Screw Jack

145206921
471775: RNCC: 3 | RNVC: 2

31 May 2000

5120-14-507-3363
Box Wrench

145073363
NNP5120878750463: RNCC: 3 | RNVC: 2

29 Jun 1998

5120-14-321-3509
Box Wrench

143213509
8810007145: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-532-1821
Crimping Tool Die

145321821
452.RN1: RNCC: 3 | RNVC: 2

16 Oct 2002

5120-14-285-7719
Rivet Bucking Bar

142857719
RT8173: RNCC: 3 | RNVC: 2
RT8173: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-546-6959
Box Wrench

145466959
S622V3100101: RNCC: 3 | RNVC: 2

2 Aug 2005

5120-14-440-3012
Brake Repair Pliers

144403012
196.KS: RNCC: 3 | RNVC: 2
3148511454107: RNCC: 5 | RNVC: 2
91624730: RNCC: 5 | RNVC: 2
0715 55 37: RNCC: 5 | RNVC: 2
196KS: RNCC: 5 | RNVC: 2
0145410: RNCC: 5 | RNVC: 9
186.KS: RNCC: 5 | RNVC: 9

11 Jul 1990

5120-14-421-0236
Drill Guide

144210236
537546: RNCC: 3 | RNVC: 2

6 Jan 1988

5120-14-363-4661
Box Wrench

143634661
W3235M: RNCC: 3 | RNVC: 9

9 May 1980

5120-14-522-3840
Mechanical Puller

145223840
TC3139G001: RNCC: 3 | RNVC: 2
80X0058000: RNCC: 5 | RNVC: 2

25 Oct 2000

5120-14-200-3986
Socket Wrench

142003986
41CLE4302: RNCC: 3 | RNVC: 2

1 Jan 1962

5120-14-449-4437
Plier Wrench

144494437
521.100: RNCC: 3 | RNVC: 2
3148511822852: RNCC: 5 | RNVC: 2
521-100: RNCC: 5 | RNVC: 2
0695 959 10: RNCC: 5 | RNVC: 2
0182285: RNCC: 5 | RNVC: 9

19 Aug 1991

5120-14-458-8834
Piston Inserter

144588834
M13586F: RNCC: 3 | RNVC: 2

5 Nov 1992

5120-14-425-9479
Aligning Punch

144259479
TOP7B1612-1A1: RNCC: 3 | RNVC: 2

28 Jul 1988

5120-14-427-0941
Mechanical Puller

144270941
540402: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-298-7863
Hand Hammer

142987863
AMPC0H821: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-432-7073
Seal Inserter

144327073
OUT11820-2: RNCC: 3 | RNVC: 2
0UT11820-2: RNCC: 5 | RNVC: 2

21 Jun 1989

5120-14-484-3692
Hand Hammer

144843692
12296: RNCC: 3 | RNVC: 2

14 Nov 1996

5120-14-529-1879
Gear Inserter

145291879
9996404-1: RNCC: 3 | RNVC: 2

15 Mar 2002

5120-14-202-1922
Saddler's Awl Haft

142021922
100-5: RNCC: 3 | RNVC: 2

1 Jan 1963

5120-14-366-9427
Putty Knife

143669427
2106BIS: RNCC: 3 | RNVC: 2

11 Dec 1980

5120-14-283-8568
Mechanical Puller

142838568
E557E1-67: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-295-1779
Drive Pin Punch

142951779
000633005P: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-237-9552
Drill Guide

142379552
0210880: RNCC: 3 | RNVC: 2
885.G5: RNCC: 5 | RNVC: 2
885G5: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-441-2145
Mechanical Puller

144412145
332A93-3420-00: RNCC: 3 | RNVC: 2

22 Aug 1990

5120-14-298-7861
Hand Hammer

142987861
202A.1': RNCC: 3 | RNVC: 2
202-1: RNCC: 5 | RNVC: 2
0146740: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-507-5722
Mechanical Puller

145075722
46159048: RNCC: 3 | RNVC: 2

23 Jul 1998

5120-14-441-4740
Tire Iron

144414740
35070-99: RNCC: 3 | RNVC: 2
1195: RNCC: 5 | RNVC: 2

29 Aug 1990

5120-14-529-3231
Mechanical Puller

145293231
J47565: RNCC: 3 | RNVC: 2

20 Mar 2002

5120-14-371-9916
Stud Inserter

143719916
25545909300: RNCC: 3 | RNVC: 2
255459093: RNCC: 5 | RNVC: 9

5 Aug 1981

5120-14-522-2425
Mechanical Puller

145222425
TC3027G001: RNCC: 3 | RNVC: 2

11 Oct 2000

5120-14-202-5522
Machinist's Vise

142025522
N0VET0: RNCC: 3 | RNVC: 2
SAMN0VET0: RNCC: 5 | RNVC: 9

1 Jan 1963

5120-14-554-2368
Box Wrench

145542368
59TX.10X12: RNCC: 3 | RNVC: 2

14 Jun 2007

5120-14-238-8543
Lamp Extractor

142388543
28569: RNCC: 3 | RNVC: 2
51202887679: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-542-9617
Mechanical Puller

145429617
837054: RNCC: 3 | RNVC: 2

14 Aug 2004

5120-14-396-1831
Float

143961831
4301022: RNCC: 3 | RNVC: 2

27 Nov 1984

5120-14-280-3992
Open End Box Wrench

142803992
520473: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-401-4083
Socket Wrench

144014083
350A93-3300-20: RNCC: 3 | RNVC: 2

5 Jun 1985

5120-14-463-6001
Mechanical Puller

144636001
9689160200: RNCC: 3 | RNVC: 2
9689160200: RNCC: 5 | RNVC: 2
RAB1313: RNCC: 5 | RNVC: 2

21 Jun 1993

5120-14-479-9015
Lamp Extractor

144799015
190900001: RNCC: 3 | RNVC: 2
190900001: RNCC: 5 | RNVC: 2

14 Feb 1996

5120-14-360-4308
Hand Screw Jack

143604308
CMV9-30: RNCC: 3 | RNVC: 2

23 Nov 1979

5120-14-368-1535
Mechanical Puller

143681535
16380146: RNCC: 3 | RNVC: 2
16380146: RNCC: 5 | RNVC: 9

20 Feb 1981

5120-14-542-9021
Socket Wrench

145429021
888-418-400-2: RNCC: 3 | RNVC: 2

14 Aug 2004

5120-14-480-0159
Crimping Tool Die

144800159
4E50-10CU: RNCC: 3 | RNVC: 2

21 Feb 1996

5120-14-472-3679
Hand Hammer

144723679
860A.36: RNCC: 3 | RNVC: 2
3148512091059: RNCC: 5 | RNVC: 2
860A36: RNCC: 5 | RNVC: 2
0209105: RNCC: 5 | RNVC: 9

19 Oct 1994

5120-14-513-1454
Mechanical Puller

145131454
0446852N00: RNCC: 3 | RNVC: 2
SD 65-3-02 0 00 0665569Y03: RNCC: 5 | RNVC: 2

5 Mar 1999

5120-14-244-9033
Socket Wrench

142449033
91.14X15: RNCC: 3 | RNVC: 2
99250210141: RNCC: 3 | RNVC: 2
3111228: RNCC: 3 | RNVC: 2
3148511275504: RNCC: 5 | RNVC: 2
91-14X15: RNCC: 5 | RNVC: 2
91-14X15-160X8: RNCC: 5 | RNVC: 9
VIR3111228: RNCC: 5 | RNVC: 9
0127550: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-479-9489
Mechanical Puller

144799489
888-379-500-3: RNCC: 3 | RNVC: 2
888-379-500-2: RNCC: 3 | RNVC: 9

14 Feb 1996

5120-14-204-8807
Putty Knife

142048807
604-80: RNCC: 3 | RNVC: 2
0695 940 908: RNCC: 5 | RNVC: 2

1 Jan 1963

5120-14-272-4034
Box Wrench

142724034
100-11X13: RNCC: 3 | RNVC: 2
3272670234895: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-385-3364
Seal Inserter

143853364
365A93-3344-20: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-406-6569
Mechanical Puller

144066569
853-200-839-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-212-2435
Socket Wrench

142122435
NO PRIMARY REF14-212-2435: RNCC: 3 | RNVC: 2
140489A: RNCC: 5 | RNVC: 9
140489B: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-487-5731
Socket Wrench

144875731
K7739-12114: RNCC: 3 | RNVC: 2
12114: RNCC: 5 | RNVC: 2

10 Apr 1997

5120-14-352-3172
Pry Bar

143523172
MGL290-21: RNCC: 3 | RNVC: 2
MGL290-21: RNCC: 5 | RNVC: 2

16 Oct 1978

5120-14-511-4255
Mechanical Puller

145114255
NO PRIMARY REF14-511-4255: RNCC: 3 | RNVC: 2
M206671: RNCC: 5 | RNVC: 9
5120AA7002525: RNCC: 6 | RNVC: 9

16 Dec 1998

5120-14-440-7132
Aligning Punch

144407132
3704MRC3-24: RNCC: 3 | RNVC: 2

18 Jul 1990

5120-14-534-5288
Aligning Punch

145345288
C13010-230: RNCC: 3 | RNVC: 2

26 Mar 2003

5120-14-273-6993
Hand Hammer Head

142736993
E71-013B4000: RNCC: 2 | RNVC: 2
3-4000: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-507-0530
Drill Guide

145070530
02891415: RNCC: 3 | RNVC: 2

8 Jun 1998

5120-14-342-0079
Mechanical Puller

143420079
9970-113-019: RNCC: 3 | RNVC: 2

14 Apr 1977

5120-14-405-8913
Socket Wrench

144058913
1400109: RNCC: 3 | RNVC: 2
313700: RNCC: 5 | RNVC: 2
144613: RNCC: 5 | RNVC: 2

12 Dec 1985

5120-14-448-6396
Socket Wrench

144486396
W-1911: RNCC: 3 | RNVC: 9
101 100-24: RNCC: 3 | RNVC: 9

4 Jul 1991

5120-14-250-7847
Socket Wrench

142507847
NO PRIMARY REF14-250-7847: RNCC: 3 | RNVC: 2
72.11: RNCC: 5 | RNVC: 2
91316642: RNCC: 5 | RNVC: 2
0117130: RNCC: 5 | RNVC: 2
0566355: RNCC: 5 | RNVC: 2
72-11: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-292-3219
Hand Screw Jack

142923219
NO PRIMARY REF14-292-3219: RNCC: 3 | RNVC: 2
CB115: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-386-6786
Mechanical Puller

143866786
853-121-005-0: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-346-1696
Pry Bar

143461696
130436: RNCC: 3 | RNVC: 2

12 Dec 1977

5120-14-495-9553
Socket Wrench

144959553
A09010415: RNCC: 3 | RNVC: 2
A09010415: RNCC: 5 | RNVC: 9
F300 0T 020 5947: RNCC: 6 | RNVC: 9

15 Oct 1997

5120-14-550-8851
Seal Inserter

145508851
TM0239G001: RNCC: 3 | RNVC: 2

26 Jul 2006

5120-14-274-8036
Hammer Handle

142748036
E71011C38A320: RNCC: 2 | RNVC: 2

1 Jan 1971

5120-14-303-6291
Open End Box Wrench

143036291
NO PRIMARY REF14-303-6291: RNCC: 3 | RNVC: 2
104-24X26: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-514-6716
Crimping Tool Die

145146716
H1-50-10: RNCC: 3 | RNVC: 2

8 Jun 1999

5120-14-342-8456
Hand Screw Jack

143428456
PC4006: RNCC: 3 | RNVC: 2
PC4006: RNCC: 5 | RNVC: 9
85-644-2283: RNCC: 6 | RNVC: 9

16 May 1977

5120-14-442-2474
Wood Caulking Iron

144422474
10-690410D: RNCC: 3 | RNVC: 2
10-690410D: RNCC: 5 | RNVC: 9
85-694-1457: RNCC: 6 | RNVC: 9

3 Oct 1990

5120-14-319-6473
Mechanical Puller

143196473
NO PRIMARY REF14-319-6473: RNCC: 3 | RNVC: 2
45849: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-379-1964
Driftpin

143791964
TF10A27306A12: RNCC: 3 | RNVC: 2
85-691-9323: RNCC: 6 | RNVC: 9

6 Sep 1982

5120-14-390-8663
Mechanical Puller

143908663
ST159-2M947-1: RNCC: 3 | RNVC: 2
ST159-2M947-1-01: RNCC: 5 | RNVC: 2

1 Mar 1984

5120-14-285-6244
Mechanical Puller

142856244
NO PRIMARY REF14-285-6244: RNCC: 3 | RNVC: 2
6457457: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-534-5286
Aligning Punch

145345286
C13010-210: RNCC: 3 | RNVC: 2

26 Mar 2003

5120-14-218-9658
Box Wrench

142189658
55.3/4X13/16: RNCC: 3 | RNVC: 2
3148511119808: RNCC: 5 | RNVC: 2
55 3-4X13-16: RNCC: 5 | RNVC: 2
SYB0298: RNCC: 5 | RNVC: 2
0111980: RNCC: 5 | RNVC: 9
65-3-4-13-16: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-441-2308
Socket Wrench

144412308
6804V32-2666-00: RNCC: 3 | RNVC: 2

22 Aug 1990

5120-14-237-9837
Hand Hammer

142379837
0213260301: RNCC: 3 | RNVC: 2
213-26EC: RNCC: 5 | RNVC: 2
M0B213-26: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-323-8255
Box Wrench

143238255
55.3/8X7/16: RNCC: 3 | RNVC: 2
3148511118603: RNCC: 5 | RNVC: 2
55 3-8X7-16: RNCC: 5 | RNVC: 2
SYQ5649: RNCC: 5 | RNVC: 2
0111860: RNCC: 5 | RNVC: 9
RT21027: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-201-6838
Hand Hammer

142016838
3892-600EMMANCHE: RNCC: 3 | RNVC: 2
0430600301: RNCC: 3 | RNVC: 2
M0B430-600EC: RNCC: 5 | RNVC: 2
91616434: RNCC: 5 | RNVC: 2
430-600EC: RNCC: 5 | RNVC: 2
66EMMANCHE: RNCC: 5 | RNVC: 9

1 Jan 1962

5120-14-203-1276
Hand Shovel

142031276
NO PRIMARY REF14-203-1276: RNCC: 3 | RNVC: 2
1336-4M: RNCC: 5 | RNVC: 9
2927-250: RNCC: 5 | RNVC: 9
236-3: RNCC: 5 | RNVC: 9

1 Jan 1963

5120-14-274-8321
Marlinespike

142748321
14-16ACIER30: RNCC: 2 | RNVC: 2

1 Jan 1971

5120-14-437-6858
Piston Inserter

144376858
9689160158: RNCC: 3 | RNVC: 2
0681340003: RNCC: 5 | RNVC: 2

7 Feb 1990

5120-14-434-7768
Seal Inserter

144347768
EM403-712-279A: RNCC: 3 | RNVC: 2
EM403-712-279A: RNCC: 5 | RNVC: 9

4 Oct 1989

5120-14-257-1785
Hand Screw Jack

142571785
6725-29: RNCC: 3 | RNVC: 2

1 Jan 1969

5120-14-250-8310
Box Wrench

142508310
62-11X13: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-424-3590
Ratchet Wrench

144243590
24C9138: RNCC: 3 | RNVC: 2

19 May 1988

5120-14-368-0571
Mechanical Puller

143680571
25545974500: RNCC: 3 | RNVC: 2
255459745: RNCC: 5 | RNVC: 9

19 Jan 1981

5120-14-344-7862
Mechanical Puller

143447862
8812035000: RNCC: 3 | RNVC: 2
85-800-6667: RNCC: 6 | RNVC: 9

9 Sep 1977

5120-14-525-9441
Mechanical Puller

145259441
888-410-700-1: RNCC: 3 | RNVC: 2

20 Jun 2001

5120-14-474-1965
Seal Inserter

144741965
1361: RNCC: 3 | RNVC: 2
5000261361: RNCC: 5 | RNVC: 2

1 Feb 1995

5120-14-466-3819
Mechanical Puller

144663819
62AM020: RNCC: 3 | RNVC: 2

3 Nov 1993

5120-14-385-3489
Mechanical Puller

143853489
6809P33-6120-20: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-395-4331
Socket Wrench

143954331
99259950102: RNCC: 3 | RNVC: 2
99-259-95-010-2: RNCC: 5 | RNVC: 2

16 Oct 1984

5120-14-274-8512
Socket Wrench

142748512
0117430: RNCC: 3 | RNVC: 2
80-41: RNCC: 3 | RNVC: 2
3107241: RNCC: 3 | RNVC: 2
122-41: RNCC: 3 | RNVC: 9
72-41: RNCC: 5 | RNVC: 2
72.41: RNCC: 5 | RNVC: 2
DEM122-41: RNCC: 5 | RNVC: 9
VIR3107241: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-278-3818
Box Wrench

142783818
23007077: RNCC: 3 | RNVC: 2
23007077-9: RNCC: 5 | RNVC: 2
31-10796HK1-67: RNCC: 5 | RNVC: 2
HK1-67: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-512-3599
Box Wrench

145123599
M2031: RNCC: 3 | RNVC: 2
85-693-4858: RNCC: 6 | RNVC: 9

10 Feb 1999

5120-14-289-8749
Mechanical Puller

142898749
RT4801: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-244-9019
Box Wrench

142449019
108-116: RNCC: 3 | RNVC: 2
50.116: RNCC: 3 | RNVC: 2
119-116: RNCC: 3 | RNVC: 9
3148511074206: RNCC: 5 | RNVC: 2
50-116: RNCC: 5 | RNVC: 2
3272670280083: RNCC: 5 | RNVC: 2
0107420: RNCC: 5 | RNVC: 9
DEM119-116: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-406-5873
Driftpin

144065873
853-200-598-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-387-1193
Socket Wrench

143871193
VTR321-2-1130: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-325-1480
Mechanical Puller

143251480
06C45: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-552-9805
Seal Remover

145529805
1810956: RNCC: 3 | RNVC: 2

21 Feb 2007

5120-14-549-8872
Box Wrench

145498872
55A.20X22: RNCC: 3 | RNVC: 2
55A.20X22: RNCC: 5 | RNVC: 2

17 May 2006

5120-14-381-0078
Hand Hammer

143810078
200-40EC: RNCC: 3 | RNVC: 2
316-40: RNCC: 3 | RNVC: 2
0200400301: RNCC: 3 | RNVC: 2

14 Dec 1982

5120-14-041-7207
Stake Puller Kit

140417207
120553: RNCC: 3 | RNVC: 2
SK-153A: RNCC: 6 | RNVC: 9

1 Jan 1974

5120-14-434-3255
Seal Inserter

144343255
EMH141378AK: RNCC: 3 | RNVC: 2
EMH141378AK: RNCC: 5 | RNVC: 9

20 Sep 1989

5120-14-487-0683
Mechanical Puller

144870683
332A93-3105-03: RNCC: 3 | RNVC: 2

2 Apr 1997

5120-14-424-0526
Mechanical Puller

144240526
6501D23-009: RNCC: 3 | RNVC: 2
6501-3210-23009: RNCC: 5 | RNVC: 2
85-692-9462: RNCC: 6 | RNVC: 9

10 May 1988

5120-14-514-7345
Mechanical Puller

145147345
332A93-3105-02: RNCC: 3 | RNVC: 2

11 Jun 1999

5120-14-378-5572
Mechanical Puller

143785572
6801P32-4135-00: RNCC: 3 | RNVC: 2
6801365A32-4135-00: RNCC: 5 | RNVC: 2

11 Aug 1982

5120-14-352-5449
Box Wrench

143525449
0M595: RNCC: 3 | RNVC: 2
0M595: RNCC: 5 | RNVC: 2

16 Oct 1978

5120-14-395-7166
Mechanical Puller

143957166
025-1778-78: RNCC: 3 | RNVC: 2

30 Oct 1984

5120-14-548-9134
Mechanical Puller

145489134
39585209: RNCC: 3 | RNVC: 2

23 Feb 2006

5120-14-400-6417
Hand Hammer

144006417
220-20X22ENX: RNCC: 3 | RNVC: 2

8 May 1985

5120-14-260-0367
Socket Wrench

142600367
321-95-0031-00: RNCC: 3 | RNVC: 2
08-404: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-440-8631
Box Wrench

144408631
851-115-019-0: RNCC: 3 | RNVC: 2

31 Jul 1990

5120-14-301-4116
Socket Wrench

143014116
91-19: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-540-0016
Aligning Punch

145400016
6501DOC212500: RNCC: 3 | RNVC: 2

25 Feb 2004

5120-14-431-7664
Mechanical Puller

144317664
8812015000: RNCC: 3 | RNVC: 2

10 May 1989

5120-14-488-9487
Mechanical Puller

144889487
38043: RNCC: 3 | RNVC: 2

13 Jun 1997

5120-14-326-8380
Mechanical Puller

143268380
4-108-9077: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-463-3653
Socket Wrench

144633653
1037262S00: RNCC: 3 | RNVC: 2

9 Jun 1993

5120-14-401-3732
Mechanical Puller

144013732
8292-03: RNCC: 3 | RNVC: 2

5 Jun 1985

5120-14-338-0893
Mechanical Puller

143380893
79046736: RNCC: 3 | RNVC: 2
79046736: RNCC: 5 | RNVC: 9
85-691-7216: RNCC: 6 | RNVC: 9

6 Nov 1976

5120-14-249-9480
Box Wrench

142499480
62-6X7: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-538-2035
Socket Wrench

145382035
NGM0010032890080: RNCC: 2 | RNVC: 2

9 Dec 2003

5120-14-494-0946
Socket Wrench

144940946
6690008000: RNCC: 3 | RNVC: 2
F300 0T 015 4479: RNCC: 6 | RNVC: 9

15 Oct 1997

5120-14-250-8390
Drive Pin Punch Set

142508390
249JS6: RNCC: 3 | RNVC: 2
065030010011: RNCC: 3 | RNVC: 2
205967: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-444-5450
Seal Inserter

144445450
260355: RNCC: 3 | RNVC: 2

15 Jan 1991

5120-14-373-4912
Socket Wrench

143734912
GSM137-027F5: RNCC: 3 | RNVC: 2

21 Oct 1981

5120-14-529-8980
Mechanical Puller

145298980
TO/A33000405: RNCC: 3 | RNVC: 2

17 Apr 2002

5120-14-338-0894
Mechanical Puller

143380894
79042337: RNCC: 3 | RNVC: 2
79042337: RNCC: 5 | RNVC: 9

6 Nov 1976

5120-14-274-8509
Socket Wrench

142748509
80-31: RNCC: 3 | RNVC: 2
0117330: RNCC: 3 | RNVC: 2
3107231: RNCC: 3 | RNVC: 2
122-31: RNCC: 3 | RNVC: 9
72-31: RNCC: 5 | RNVC: 2
72.31: RNCC: 5 | RNVC: 2
DEM122-31: RNCC: 5 | RNVC: 9
VIR3107231: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-321-2179
Mechanical Puller

143212179
0M458-10: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-280-0780
Mechanical Puller

142800780
0836-78: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-280-4156
Mechanical Puller

142804156
A128799: RNCC: 3 | RNVC: 2
100266: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-414-9623
Screw Extractor

144149623
285F3: RNCC: 3 | RNVC: 2
3148511652107: RNCC: 5 | RNVC: 2

26 Mar 1987

5120-14-274-7895
Wood Mallet

142747895
621AFT5T: RNCC: 2 | RNVC: 2

1 Jan 1971

5120-14-370-8869
Gear Inserter

143708869
6801R32-1001-00: RNCC: 3 | RNVC: 2
6801366A32-1001-00: RNCC: 5 | RNVC: 2

5 Jun 1981

5120-14-308-5697
Marlinespike

143085697
499AFPBREST1972-450MM: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-536-7935
Hot Line Stick

145367935
CS-90: RNCC: 3 | RNVC: 2
D05047J: RNCC: 5 | RNVC: 2

17 Sep 2003

5120-14-519-4862
Pipe Wrench

145194862
TF50B26501: RNCC: 3 | RNVC: 2

22 Mar 2000

5120-14-465-4653
Seal Inserter

144654653
851-500-077-0: RNCC: 3 | RNVC: 2

30 Sep 1993

5120-14-410-3829
Mechanical Puller

144103829
15737-502: RNCC: 3 | RNVC: 2

18 Jun 1986

5120-14-300-6320
Mechanical Puller

143006320
1118UGCME: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-409-0878
Tire Iron

144090878
HYUDE1195: RNCC: 3 | RNVC: 2

16 Apr 1986

5120-14-553-1684
Sealant Dispenser

145531684
0891893480: RNCC: 3 | RNVC: 2

8 Mar 2007

5120-14-387-6668
Box Wrench

143876668
9072608350: RNCC: 3 | RNVC: 2

12 Oct 1983

5120-14-432-7315
Seal Inserter

144327315
NO PRIMARY REF14-432-7315: RNCC: 3 | RNVC: 2
0U139361: RNCC: 5 | RNVC: 9
OU139361: RNCC: 5 | RNVC: 9

21 Jun 1989

5120-14-204-9198
Saddler's Awl Haft

142049198
35: RNCC: 3 | RNVC: 2

1 Jan 1963

5120-14-434-6035
Hand Hammer

144346035
0204360301: RNCC: 3 | RNVC: 2
204-36EC: RNCC: 3 | RNVC: 2

26 Sep 1989

5120-14-249-3287
Stake Puller Kit

142493287
12510935: RNCC: 3 | RNVC: 2
12510935: RNCC: 3 | RNVC: 9
145660: RNCC: 5 | RNVC: 9
C145660: RNCC: 5 | RNVC: 9
MQ-13A: RNCC: 6 | RNVC: 9

1 Jan 1968

5120-14-389-8540
Mechanical Puller

143898540
M24-045: RNCC: 3 | RNVC: 2
M24045: RNCC: 5 | RNVC: 2

20 Dec 1983

5120-14-542-9435
Mechanical Puller

145429435
8460003: RNCC: 3 | RNVC: 2
8460003: RNCC: 5 | RNVC: 2

14 Aug 2004

5120-14-394-3334
Mechanical Puller

143943334
20196325: RNCC: 3 | RNVC: 2
20196325: RNCC: 5 | RNVC: 9

28 Aug 1984

5120-14-394-3314
Mechanical Puller

143943314
8813859000: RNCC: 3 | RNVC: 2

28 Aug 1984

5120-14-201-3169
Hand Posthole Auger

142013169
0RT6-311B0I4-116: RNCC: 3 | RNVC: 2
0RT6-311B0I4-116: RNCC: 5 | RNVC: 9

1 Jan 1962

5120-14-385-3328
Mechanical Puller

143853328
365A93-3101-00: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-300-9611
Driftpin

143009611
341A93-1105-00: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-338-4722
Mechanical Puller

143384722
C20-21819-0-1: RNCC: 3 | RNVC: 2

6 Nov 1976

5120-14-486-5636
Drill Guide

144865636
RT13849: RNCC: 3 | RNVC: 2

24 Mar 1997

5120-14-317-0425
Mechanical Puller

143170425
RT5163: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-274-8177
Pipe Wrench

142748177
632-48: RNCC: 3 | RNVC: 2
4557-152: RNCC: 3 | RNVC: 2
0101480: RNCC: 3 | RNVC: 2
VIR0101480: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-432-7128
Seal Inserter

144327128
NO PRIMARY REF14-432-7128: RNCC: 3 | RNVC: 2
0U139176: RNCC: 5 | RNVC: 9
OU139176: RNCC: 5 | RNVC: 9

21 Jun 1989

5120-14-389-2203
Socket Wrench

143892203
TMY2071008G01: RNCC: 3 | RNVC: 2
85-692-4273: RNCC: 6 | RNVC: 9

29 Nov 1983

5120-14-204-9264
Socket Wrench

142049264
56-26X29: RNCC: 3 | RNVC: 2

1 Jan 1963

5120-14-424-6666
Drive Pin Punch

144246666
246.6: RNCC: 3 | RNVC: 2
246.6: RNCC: 5 | RNVC: 2
246-6: RNCC: 5 | RNVC: 2
3148511587409: RNCC: 5 | RNVC: 2
91635471: RNCC: 5 | RNVC: 2
0158740: RNCC: 5 | RNVC: 9

2 Jun 1988

5120-14-451-5102
Aligning Punch

144515102
540281: RNCC: 3 | RNVC: 2

21 Nov 1991

5120-14-458-1405
Mechanical Puller

144581405
45056058: RNCC: 3 | RNVC: 2
45056058: RNCC: 5 | RNVC: 9

8 Oct 1992

5120-14-219-4170
Spatula

142194170
89901: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-425-9574
Aligning Punch

144259574
502187RTH20R2: RNCC: 3 | RNVC: 2

28 Jul 1988

5120-14-533-1409
Seal Inserter

145331409
888-452-003-0: RNCC: 3 | RNVC: 2

23 Jan 2003

5120-14-529-4248
Socket Wrench

145294248
6401LOC001: RNCC: 3 | RNVC: 2

29 Mar 2002

5120-14-527-8195
Mechanical Puller

145278195
888-504-000-1: RNCC: 3 | RNVC: 2

21 Nov 2001

5120-14-305-2140
Socket Wrench

143052140
77C: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-410-3846
Rubber Mallet

144103846
1SR: RNCC: 3 | RNVC: 2
62QSR1: RNCC: 3 | RNVC: 2

18 Jun 1986

5120-14-215-1382
Mechanical Puller

142151382
3130S95-66-033-3: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-336-3208
Ratchet Wrench

143363208
2786-30: RNCC: 3 | RNVC: 2
4141-30: RNCC: 3 | RNVC: 9
323-10DR0ITEETGAUCHE30: RNCC: 5 | RNVC: 9

24 Jul 1976

5120-14-387-3202
Box Wrench

143873202
6511C: RNCC: 3 | RNVC: 9

15 Sep 1983

5120-14-550-1529
Woven Cable Grip

145501529
500053: RNCC: 3 | RNVC: 2

5 Jun 2006

5120-14-490-6426
Open End Box Wrench

144906426
70A.10: RNCC: 3 | RNVC: 2
3148511166444: RNCC: 5 | RNVC: 2
91777949: RNCC: 5 | RNVC: 2
0116644: RNCC: 5 | RNVC: 9

8 Oct 1997

5120-14-500-9595
Hand Shovel

145009595
C69402100000: RNCC: 3 | RNVC: 2
F300 0T 024 9807: RNCC: 6 | RNVC: 9

29 Oct 1997

5120-14-373-5249
Hand Hammer Head

143735249
332-35: RNCC: 3 | RNVC: 2

21 Oct 1981

5120-14-319-6883
Socket Wrench

143196883
G1-15-660: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-357-4553
Socket Wrench Set

143574553
8812386000: RNCC: 3 | RNVC: 2

7 Jun 1979

5120-14-481-4775
Aligning Punch

144814775
853-930-215-0: RNCC: 3 | RNVC: 2

8 May 1996

5120-14-503-5309
Hand Roller

145035309
164916: RNCC: 3 | RNVC: 9

19 Jan 1998

5120-14-326-0183
Mechanical Puller

143260183
151933: RNCC: 3 | RNVC: 2
151933: RNCC: 5 | RNVC: 9
85-800-1447: RNCC: 6 | RNVC: 9

2 Jul 1975

5120-14-427-2514
Mechanical Puller

144272514
488402M84-06PN5: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-340-0341
Hand Screw Jack

143400341
501MA0015: RNCC: 3 | RNVC: 2
501MA015: RNCC: 5 | RNVC: 2

18 Jan 1977

5120-14-363-7099
Driftpin

143637099
160-888623-02: RNCC: 3 | RNVC: 2

6 Jul 1980

5120-14-502-3082
Aligning Punch

145023082
10319786: RNCC: 3 | RNVC: 2

9 Dec 1997

5120-14-249-9411
Box Wrench

142499411
62-22X24: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-389-8758
Mechanical Puller

143898758
8810029000: RNCC: 3 | RNVC: 2

20 Dec 1983

5120-14-540-8521
Digging Bar

145408521
0152120601: RNCC: 3 | RNVC: 2
3303800152021: RNCC: 5 | RNVC: 2

23 Apr 2004

5120-14-504-8370
Pipe Wrench

145048370
121.50: RNCC: 3 | RNVC: 2
3148511345900: RNCC: 5 | RNVC: 2

4 Mar 1998

5120-14-485-8830
Socket Wrench

144858830
K7739-12111-1/2X9/16: RNCC: 3 | RNVC: 2
12111-1/2X9/16: RNCC: 5 | RNVC: 2

19 Feb 1997

5120-14-477-1535
Mechanical Puller

144771535
805042: RNCC: 3 | RNVC: 2
5120AA2076926: RNCC: 6 | RNVC: 9

26 Jul 1995

5120-14-464-7299
Mechanical Puller

144647299
A1003: RNCC: 3 | RNVC: 2

30 Aug 1993

5120-14-475-3830
Basin Wrench

144753830
2614 05: RNCC: 3 | RNVC: 2

4 Apr 1995

5120-14-552-2377
Ratchet Wrench

145522377
SP.14383: RNCC: 3 | RNVC: 2
18817052-5: RNCC: 5 | RNVC: 2

5 Dec 2006

5120-14-446-0546
Socket Wrench

144460546
541449: RNCC: 3 | RNVC: 2

5 Mar 1991

5120-14-462-2910
Hand Hammer

144622910
B2621: RNCC: 3 | RNVC: 2

15 Apr 1993

5120-14-506-7424
Box Wrench

145067424
58-18X19: RNCC: 3 | RNVC: 2
58.18X19: RNCC: 3 | RNVC: 2
3148511137604: RNCC: 5 | RNVC: 2
0113760: RNCC: 5 | RNVC: 9

13 May 1998

5120-14-507-8250
Mechanical Puller

145078250
CLU01-102: RNCC: 3 | RNVC: 2
85-456-1121: RNCC: 6 | RNVC: 9

20 Aug 1998

5120-14-432-7316
Seal Inserter

144327316
NO PRIMARY REF14-432-7316: RNCC: 3 | RNVC: 2
0U139362: RNCC: 5 | RNVC: 9
OU139362: RNCC: 5 | RNVC: 9

21 Jun 1989

5120-14-399-0985
Socket Wrench

143990985
132124: RNCC: 3 | RNVC: 2

6 Mar 1985

5120-14-540-0048
Mechanical Puller

145400048
PYM001020004: RNCC: 3 | RNVC: 2

25 Feb 2004

5120-14-216-1876
Box Wrench

142161876
RT2882: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-478-3300
Drive Pin Punch Set

144783300
251A.JS9: RNCC: 3 | RNVC: 2
0539120: RNCC: 5 | RNVC: 2
251AJS9: RNCC: 5 | RNVC: 2
3148515391200: RNCC: 5 | RNVC: 2
0133940M00: RNCC: 5 | RNVC: 2

25 Oct 1995

5120-14-548-6385
Mechanical Puller

145486385
F27226000: RNCC: 3 | RNVC: 2

27 Jan 2006

5120-14-374-0070
Mechanical Puller

143740070
15-255D: RNCC: 3 | RNVC: 2

8 Dec 1981

5120-14-254-7251
Mechanical Puller

142547251
TAX0A100MM: RNCC: 3 | RNVC: 2
ZINTAX0A100MM: RNCC: 5 | RNVC: 9

1 Jan 1969

5120-14-488-3106
Box Wrench

144883106
59.18X19: RNCC: 3 | RNVC: 2
0113910: RNCC: 5 | RNVC: 2
59-18X19: RNCC: 5 | RNVC: 2
3148511139103: RNCC: 5 | RNVC: 2

30 Apr 1997

5120-14-546-6659
Box Wrench

145466659
55A.21X23: RNCC: 3 | RNVC: 2
55A.21X23: RNCC: 5 | RNVC: 2

27 Jul 2005

5120-14-548-0493
Mechanical Puller

145480493
SEF660M+SEF645: RNCC: 3 | RNVC: 2
5000269423: RNCC: 5 | RNVC: 2

7 Dec 2005

5120-14-212-8302
Marlinespike

142128302
512-200-16: RNCC: 3 | RNVC: 2

1 Jan 1964

5120-14-512-5698
Hand Hydraulic Jack

145125698
SE020AE03: RNCC: 3 | RNVC: 2

17 Feb 1999

5120-14-510-6883
Socket Wrench Set

145106883
59TX.J4: RNCC: 3 | RNVC: 2

4 Nov 1998

5120-14-232-2499
Screw Extractor

142322499
885.EH4: RNCC: 3 | RNVC: 2
3148512105008: RNCC: 5 | RNVC: 2
885EH4: RNCC: 5 | RNVC: 2
91628363: RNCC: 5 | RNVC: 2
0690 141 4: RNCC: 5 | RNVC: 2
0210500: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-552-6224
Socket Wrench Set

145526224
S.446DP: RNCC: 3 | RNVC: 2
3148515168208: RNCC: 5 | RNVC: 2
S.446DP: RNCC: 5 | RNVC: 2

18 Jan 2007

5120-14-400-6258
Hand Screw Jack

144006258
DLP752711: RNCC: 3 | RNVC: 2

8 May 1985

5120-14-220-7531
Socket Wrench

142207531
Y235: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-497-7996
Seal Inserter

144977996
D228044000004: RNCC: 3 | RNVC: 2

20 Oct 1997

5120-14-270-8382
Box Wrench

142708382
D1553-4810: RNCC: 3 | RNVC: 2
D1553-4810: RNCC: 5 | RNVC: 9

1 Jan 1970

5120-14-517-3809
Mechanical Puller

145173809
0XB501-009-200-58: RNCC: 3 | RNVC: 2

8 Dec 1999

5120-14-343-6354
Aligning Punch

143436354
330A97-2404-45: RNCC: 3 | RNVC: 2

16 Jun 1977

5120-14-294-0758
Aligning Punch

142940758
BB49: RNCC: 3 | RNVC: 9

1 Jan 1973

5120-14-416-0210
Socket Wrench

144160210
M4Z6021900501: RNCC: 3 | RNVC: 2

3 Jun 1987

5120-14-316-4993
Mechanical Puller

143164993
0U50122: RNCC: 3 | RNVC: 2
50122: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-464-4895
Rivet Bucking Bar

144644895
851-910-036-0: RNCC: 3 | RNVC: 2

4 Aug 1993

5120-14-338-3932
Socket Wrench

143383932
92-28: RNCC: 3 | RNVC: 2
86-28: RNCC: 3 | RNVC: 2
168-28: RNCC: 3 | RNVC: 9
3272670231030: RNCC: 5 | RNVC: 2
DEM168-28: RNCC: 5 | RNVC: 9

6 Nov 1976

5120-14-524-0572
Seal Inserter

145240572
CAS2373: RNCC: 3 | RNVC: 2

22 Feb 2001

5120-14-531-8841
Seal Inserter

145318841
T623G3005101: RNCC: 3 | RNVC: 2

25 Sep 2002

5120-14-443-2221
Crimping Tool Die

144432221
58082-1: RNCC: 3 | RNVC: 2

12 Nov 1990

5120-14-319-6472
Mechanical Puller

143196472
NO PRIMARY REF14-319-6472: RNCC: 3 | RNVC: 2
45844: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-462-9113
Gear Inserter

144629113
45057844: RNCC: 3 | RNVC: 2
45057844: RNCC: 5 | RNVC: 9

5 May 1993

5120-14-213-5222
Mechanical Puller

142135222
50714: RNCC: 3 | RNVC: 2

1 Jan 1964

5120-14-506-8039
Seal Inserter

145068039
L2ABV201M: RNCC: 3 | RNVC: 2
L2ABV201M: RNCC: 5 | RNVC: 9
85-694-8447: RNCC: 6 | RNVC: 9

20 May 1998

5120-14-231-8554
Hand Hammer

142318554
T06-003-13: RNCC: 2 | RNVC: 2
695 710 120 064: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-478-0756
Socket Wrench

144780756
M418610A9294A01: RNCC: 3 | RNVC: 2

11 Oct 1995

5120-14-326-0851
Putty Knife

143260851
32072M: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-469-9780
Mechanical Puller

144699780
008755010P: RNCC: 3 | RNVC: 2

24 May 1994

5120-14-532-1139
Mechanical Puller

145321139
S631V3001101: RNCC: 3 | RNVC: 2

9 Oct 2002

5120-14-254-7926
Mechanical Puller

142547926
U.51B: RNCC: 3 | RNVC: 2
3148515226205: RNCC: 5 | RNVC: 2
U51B: RNCC: 5 | RNVC: 2
5000260043: RNCC: 5 | RNVC: 2
CAE00936: RNCC: 5 | RNVC: 2
0522620: RNCC: 5 | RNVC: 9
5000260043: RNCC: 5 | RNVC: 9

1 Jan 1969

5120-14-352-5432
Socket Wrench

143525432
0M576-11: RNCC: 3 | RNVC: 2
0M576-11: RNCC: 5 | RNVC: 2

16 Oct 1978

5120-14-542-7813
Hand Hammer

145427813
213.F40: RNCC: 3 | RNVC: 2
213.F40: RNCC: 5 | RNVC: 2
148656: RNCC: 5 | RNVC: 2
AA000120: RNCC: 6 | RNVC: 9

14 Aug 2004

5120-14-222-1022
Drive Pin Punch

142221022
BB445: RNCC: 3 | RNVC: 9

1 Jan 1966

5120-14-523-8310
Hand Screw Jack

145238310
756-6T: RNCC: 3 | RNVC: 2

6 Feb 2001

5120-14-416-1047
Drive Pin Punch

144161047
AA7-62NF1-1677: RNCC: 3 | RNVC: 2

3 Jun 1987

5120-14-399-7619
Drain Plug Wrench

143997619
D.30: RNCC: 3 | RNVC: 2
0018300: RNCC: 5 | RNVC: 2
3148510183008: RNCC: 5 | RNVC: 2
D30: RNCC: 5 | RNVC: 2

14 Mar 1985

5120-14-540-8172
Torque Screwdriver

145408172
A.340MT: RNCC: 3 | RNVC: 2
3148510013527: RNCC: 5 | RNVC: 2

23 Apr 2004

5120-14-400-6407
Hand Hammer

144006407
0200320401: RNCC: 3 | RNVC: 2
200-32ENX: RNCC: 3 | RNVC: 2

8 May 1985

5120-14-485-8833
Box Wrench

144858833
602663: RNCC: 3 | RNVC: 2

19 Feb 1997

5120-14-341-1405
Hot Line Stick

143411405
16400869: RNCC: 3 | RNVC: 2
16400869: RNCC: 3 | RNVC: 9
SA-123A: RNCC: 6 | RNVC: 9

16 Mar 1977

5120-14-415-4719
Mechanical Puller

144154719
4709: RNCC: 3 | RNVC: 2

18 May 1987

5120-14-432-7075
Seal Inserter

144327075
OUT11821-12: RNCC: 3 | RNVC: 2
0UT11821-12: RNCC: 5 | RNVC: 2

21 Jun 1989

5120-14-425-6841
Mechanical Puller

144256841
8813090000: RNCC: 3 | RNVC: 2

21 Jul 1988

5120-14-406-9513
Mechanical Puller

144069513
853-202-008-0: RNCC: 3 | RNVC: 2

22 Jan 1986

5120-14-314-6090
Socket Wrench

143146090
97-21: RNCC: 3 | RNVC: 2
3272670270084: RNCC: 5 | RNVC: 2

1 Jan 1974

5120-14-289-8461
Crimping Tool Die

142898461
47807-1: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-477-5037
Drive Pin Punch

144775037
249.G4: RNCC: 3 | RNVC: 2
3148511594520: RNCC: 5 | RNVC: 2
1109702K00: RNCC: 5 | RNVC: 2
249.G4: RNCC: 5 | RNVC: 2
0159452: RNCC: 5 | RNVC: 9

7 Sep 1995

5120-14-506-7873
Drill Guide

145067873
009419080P: RNCC: 3 | RNVC: 2

18 May 1998

5120-14-525-5092
Mechanical Puller

145255092
5000261666: RNCC: 3 | RNVC: 2

6 Jun 2001

5120-14-548-7992
Seal Inserter

145487992
T212G30T0001: RNCC: 1 | RNVC: 2
DA03446A: RNCC: 3 | RNVC: 2

13 Feb 2006

5120-14-289-1351
Box Wrench

142891351
100-4X5: RNCC: 3 | RNVC: 2
SAM100-4X5: RNCC: 5 | RNVC: 2
3272670285972: RNCC: 5 | RNVC: 2
85-686-2719: RNCC: 6 | RNVC: 9

1 Jan 1972

5120-14-333-3824
Mechanical Puller

143333824
150807: RNCC: 3 | RNVC: 2
85-800-4857: RNCC: 6 | RNVC: 9

2 Jul 1975

5120-14-441-2352
Mechanical Puller

144412352
6901E31-9830-21: RNCC: 3 | RNVC: 2

22 Aug 1990

5120-14-543-4631
Nutdriver

145434631
D.133A7: RNCC: 3 | RNVC: 2

4 Nov 2004

5120-14-552-0464
Socket Wrench

145520464
99C.11: RNCC: 3 | RNVC: 2
00.39.88.11: RNCC: 5 | RNVC: 2

22 Nov 2006

5120-14-541-0215
Hand Hammer

145410215
0127080201: RNCC: 3 | RNVC: 2
3303800127029: RNCC: 5 | RNVC: 2

5 May 2004

5120-14-410-3836
Mechanical Puller

144103836
15737-510A: RNCC: 3 | RNVC: 2

18 Jun 1986

5120-14-311-7465
Box Wrench

143117465
6800-1059: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-388-2293
Mechanical Puller

143882293
VTR501-2-1020: RNCC: 3 | RNVC: 2

12 Oct 1983

5120-14-530-6429
Seal Inserter

145306429
D47731R3: RNCC: 3 | RNVC: 2

1 Jul 2002

5120-14-273-6810
Mechanical Puller

142736810
8810592000: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-436-4820
Mechanical Puller

144364820
350A93-3204-00: RNCC: 3 | RNVC: 2

3 Jan 1990

5120-14-342-3611
Box Wrench

143423611
RT20782: RNCC: 3 | RNVC: 2
85-653-7080: RNCC: 6 | RNVC: 9

14 Apr 1977

5120-14-509-8998
Aligning Punch

145098998
M31-050-100: RNCC: 3 | RNVC: 2
5120AA1094355: RNCC: 6 | RNVC: 9

4 Nov 1998

5120-14-463-3249
Seal Inserter

144633249
0000078900: RNCC: 3 | RNVC: 2

9 Jun 1993

5120-14-552-4423
Seal Inserter

145524423
S651V3001124: RNCC: 3 | RNVC: 2

3 Jan 2007

5120-14-431-8516
Socket Wrench

144318516
37AM045: RNCC: 3 | RNVC: 2

10 May 1989

5120-14-461-4780
Jaw Cable Grip

144614780
622881: RNCC: 3 | RNVC: 2

10 Mar 1993

5120-14-527-8569
Mechanical Puller

145278569
U.32T2-8: RNCC: 3 | RNVC: 2

27 Nov 2001

5120-14-414-5634
Box Wrench

144145634
W-610: RNCC: 3 | RNVC: 9

11 Feb 1987

5120-14-482-1316
Hand Shovel

144821316
009098080P: RNCC: 3 | RNVC: 2

20 Jun 1996

5120-14-461-7763
Multiposition Vise

144617763
1150.MT: RNCC: 3 | RNVC: 2
1150MT: RNCC: 5 | RNVC: 2
3148512252702: RNCC: 5 | RNVC: 2
162-0582: RNCC: 5 | RNVC: 2
0225270: RNCC: 5 | RNVC: 9
FACOM1150.MT: RNCC: 5 | RNVC: 9

24 Mar 1993

5120-14-250-0098
Box Wrench

142500098
NO PRIMARY REF14-250-0098: RNCC: 3 | RNVC: 2
35650: RNCC: 5 | RNVC: 9
76250: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-375-3549
Box Wrench

143753549
20189043: RNCC: 3 | RNVC: 2
20189043: RNCC: 5 | RNVC: 9

26 Feb 1982

5120-14-373-4532
Drive Pin Punch

143734532
GY15619-1CAL30-32: RNCC: 2 | RNVC: 2

21 Oct 1981

5120-14-256-2162
Box Wrench

142562162
100-6X7: RNCC: 3 | RNVC: 2
113-6X7: RNCC: 3 | RNVC: 9
3272670256309: RNCC: 5 | RNVC: 2
DEM113-6X7: RNCC: 5 | RNVC: 9

1 Jan 1969

5120-14-272-4033
Box Wrench

142724033
100-9X12: RNCC: 3 | RNVC: 2
62-9X12: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-530-8137
Screw Extractor

145308137
01-09080001: RNCC: 3 | RNVC: 2
SYB5426: RNCC: 5 | RNVC: 2

5 Jul 2002

5120-14-462-9837
Aligning Punch

144629837
T700A2799000016: RNCC: 3 | RNVC: 2

12 May 1993

5120-14-366-4827
Hand Hammer

143664827
213-30C47: RNCC: 3 | RNVC: 2

20 Nov 1980

5120-14-541-1670
Hand Saw Set

145411670
138846: RNCC: 3 | RNVC: 2

14 May 2004

5120-14-469-9068
Socket Wrench

144699068
72.17VSE: RNCC: 3 | RNVC: 2
3148511167878: RNCC: 5 | RNVC: 2
0116870: RNCC: 5 | RNVC: 9

18 May 1994

5120-14-306-4360
Box Wrench

143064360
8810048007: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-522-8877
Seal Inserter

145228877
46007937: RNCC: 3 | RNVC: 2
8023921Q00: RNCC: 5 | RNVC: 2
46007937: RNCC: 5 | RNVC: 2

6 Dec 2000

5120-14-350-3414
Fuse Puller

143503414
P0RTEP0URBC100: RNCC: 3 | RNVC: 2

12 Jul 1978

5120-14-256-8896
Socket Wrench

142568896
A28386: RNCC: 3 | RNVC: 2
A28386: RNCC: 3 | RNVC: 2

1 Jan 1969

5120-14-531-5804
Oil Filter Wrench

145315804
140.246: RNCC: 3 | RNVC: 2
140246: RNCC: 5 | RNVC: 2

2 Sep 2002

5120-14-309-7459
Driftpin

143097459
341A98-2029-20: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-438-3485
Gear Inserter

144383485
330A98-3395-00: RNCC: 3 | RNVC: 2

14 Mar 1990

5120-14-360-6455
Mechanical Puller

143606455
8810572100: RNCC: 3 | RNVC: 2

19 Dec 1979

5120-14-397-2086
Mechanical Puller

143972086
853-200-936-0: RNCC: 3 | RNVC: 2

1 Dec 1984

5120-14-313-7265
Mechanical Puller

143137265
C47177: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-317-0373
Mechanical Puller

143170373
RT4750: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-466-3746
Aligning Punch

144663746
J47125: RNCC: 3 | RNVC: 2

3 Nov 1993

5120-14-552-7960
Drive Pin Punch Set

145527960
249.G247GJ12: RNCC: 3 | RNVC: 2
249.G247GJ12: RNCC: 5 | RNVC: 2
3148515389191: RNCC: 5 | RNVC: 2

1 Feb 2007

5120-14-456-6628
Crimping Tool Die

144566628
69344: RNCC: 3 | RNVC: 2

18 Jul 1992

5120-14-421-7704
Driftpin

144217704
NO PRIMARY REF14-421-7704: RNCC: 3 | RNVC: 2
9933337400: RNCC: 5 | RNVC: 9

27 Jan 1988

5120-14-352-5965
Drift Pin Set

143525965
341A94-2710-02: RNCC: 3 | RNVC: 2

16 Oct 1978

5120-14-516-5335
Stake Puller Kit

145165335
38757985: RNCC: 3 | RNVC: 2

1 Oct 1999

5120-14-522-6502
Screwdriver Bit Set

145226502
AME.B6: RNCC: 3 | RNVC: 2
1124511T00: RNCC: 5 | RNVC: 2
SYQ5219: RNCC: 5 | RNVC: 2

10 Nov 2000

5120-14-546-2222
Hand Beading Tool

145462222
31680: RNCC: 3 | RNVC: 2

15 Jun 2005

5120-14-387-6700
Socket Wrench Set

143876700
8814688001: RNCC: 3 | RNVC: 2

12 Oct 1983

5120-14-297-4260
Socket Wrench Set

142974260
94.JL9: RNCC: 3 | RNVC: 2
94JL9: RNCC: 5 | RNVC: 2
3148515332609: RNCC: 5 | RNVC: 2
0533260: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-446-6335
Hand Vise

144466335
800B656800: RNCC: 3 | RNVC: 2

9 Apr 1991

5120-14-408-3249
Ratchet Wrench

144083249
09053104: RNCC: 3 | RNVC: 2

19 Mar 1986

5120-14-294-3532
Socket Wrench

142943532
8811484000: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-524-4195
Piston Inserter

145244195
Q47800: RNCC: 3 | RNVC: 2

16 Mar 2001

5120-14-376-5014
Hand Vise

143765014
004933001P: RNCC: 3 | RNVC: 2

28 Apr 1982

5120-14-310-5423
Socket Wrench Set

143105423
B14J5PA: RNCC: 3 | RNVC: 2
B14J5P: RNCC: 5 | RNVC: 2

1 Jan 1974

5120-14-518-8195
Mechanical Puller

145188195
46875080: RNCC: 3 | RNVC: 2

21 Feb 2000

5120-14-232-3063
Box Wrench

142323063
3271-55-4: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-280-1697
Socket Wrench

142801697
80-1-4: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-438-4452
Socket Wrench

144384452
39387519: RNCC: 3 | RNVC: 2

21 Mar 1990

5120-14-210-9826
Socket Wrench

142109826
80-12: RNCC: 3 | RNVC: 2
122 C 12: RNCC: 3 | RNVC: 9
3107212: RNCC: 5 | RNVC: 2
8505299: RNCC: 5 | RNVC: 2
DEM122 C 12: RNCC: 5 | RNVC: 9
122-12: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-229-8593
Socket Wrench

142298593
NO PRIMARY REF14-229-8593: RNCC: 3 | RNVC: 2
144L380: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-222-7497
Box Wrench

142227497
57-5-8X3-4: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-405-2692
Socket Wrench

144052692
144002: RNCC: 3 | RNVC: 2

27 Nov 1985

5120-14-530-6552
Socket Wrench

145306552
010348062P: RNCC: 3 | RNVC: 2

2 Jul 2002

5120-14-546-2226
Crimping Tool Die

145462226
32030-3: RNCC: 3 | RNVC: 2

15 Jun 2005

5120-14-201-2361
Screw Extractor

142012361
285.5: RNCC: 3 | RNVC: 2
3059002350: RNCC: 5 | RNVC: 2
FACOM 285-5: RNCC: 5 | RNVC: 2
285-5: RNCC: 5 | RNVC: 2
3148511650202: RNCC: 5 | RNVC: 2
0695 348 127: RNCC: 5 | RNVC: 2
0165020: RNCC: 5 | RNVC: 9
958 282 000 001: RNCC: 6 | RNVC: 9

1 Jan 1962

5120-14-513-6838
Socket Wrench

145136838
MAT196-1234F23: RNCC: 3 | RNVC: 2

6 Apr 1999

5120-14-438-4447
Socket Wrench

144384447
39384008: RNCC: 3 | RNVC: 2

21 Mar 1990

5120-14-358-3631
Machinist's Vise

143583631
61015: RNCC: 3 | RNVC: 2
SAM61015: RNCC: 5 | RNVC: 9

13 Aug 1979

5120-14-220-8420
Open End Box Wrench

142208420
8995: RNCC: 3 | RNVC: 2
17-9-141: RNCC: 5 | RNVC: 2
2501-96-14069: RNCC: 5 | RNVC: 2

1 Jan 1965

5120-14-331-5448
Mechanical Puller

143315448
NO PRIMARY REF14-331-5448: RNCC: 3 | RNVC: 2
MT85302051: RNCC: 5 | RNVC: 9

2 Jul 1975

5120-14-537-9575
Torque Wrench Set

145379575
IF259-530: RNCC: 3 | RNVC: 9

8 Dec 2003

5120-14-533-9773
Mechanical Puller

145339773
94905063: RNCC: 3 | RNVC: 2

5 Mar 2003

5120-14-253-4570
Mechanical Puller

142534570
321-97-0012: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-447-1160
Socket Wrench

144471160
8817568000: RNCC: 3 | RNVC: 2

3 May 1991

5120-14-485-8824
Lamp Extractor

144858824
K7739-12201: RNCC: 3 | RNVC: 2
12201: RNCC: 5 | RNVC: 2

19 Feb 1997

5120-14-490-2333
Hand Scissors Jack

144902333
6725-84: RNCC: 3 | RNVC: 2
6725-75: RNCC: 5 | RNVC: 2
9619807080: RNCC: 5 | RNVC: 2

24 Sep 1997

5120-14-272-4057
Box Wrench

142724057
55.20X22: RNCC: 3 | RNVC: 2
105N20X22: RNCC: 3 | RNVC: 2
111-20X22: RNCC: 3 | RNVC: 9
55.20X22: RNCC: 5 | RNVC: 2
3148511111406: RNCC: 5 | RNVC: 2
55-20X22: RNCC: 5 | RNVC: 2
0713 305 202: RNCC: 5 | RNVC: 2
0111140: RNCC: 5 | RNVC: 9
DEM111-20X22: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-307-8811
Seal Inserter

143078811
330A93-3107-00: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-403-9299
Socket Wrench

144039299
22029: RNCC: 3 | RNVC: 2

11 Sep 1985

5120-14-270-7133
Socket Wrench

142707133
VILEBREQUINCEYTA: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-420-9673
Hand Vise

144209673
A9122: RNCC: 3 | RNVC: 9

6 Jan 1988

5120-14-436-1669
Drill Guide

144361669
2642188-3: RNCC: 3 | RNVC: 2

6 Dec 1989

5120-14-430-2458
Socket Wrench

144302458
RL136/200S: RNCC: 3 | RNVC: 2

14 Mar 1989

5120-14-311-4677
Box Wrench

143114677
RT13003: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-528-0689
Seal Inserter

145280689
888-478-900-1: RNCC: 3 | RNVC: 2

12 Dec 2001

5120-14-399-1832
Mechanical Puller

143991832
8814949000: RNCC: 3 | RNVC: 2

6 Mar 1985

5120-14-445-0588
Drive Pin Punch

144450588
33121: RNCC: 3 | RNVC: 2

31 Jan 1991

5120-14-275-8967
Fid

142758967
NO PRIMARY REF14-275-8967: RNCC: 3 | RNVC: 2
925-500: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-432-7227
Seal Inserter

144327227
OUT50160-2: RNCC: 3 | RNVC: 2
0UT50160-2: RNCC: 5 | RNVC: 2

21 Jun 1989

5120-14-529-1878
Seal Inserter

145291878
9996385-2: RNCC: 3 | RNVC: 2

15 Mar 2002

5120-14-443-3380
Hand Tube Bender

144433380
251016: RNCC: 3 | RNVC: 2
2510116: RNCC: 5 | RNVC: 2

16 Nov 1990

5120-14-500-4830
Digging Bar

145004830
7-022627-3: RNCC: 3 | RNVC: 2
70226273: RNCC: 3 | RNVC: 2
F300 0T 024 5000: RNCC: 6 | RNVC: 9

29 Oct 1997

5120-14-331-5447
Mechanical Puller

143315447
NO PRIMARY REF14-331-5447: RNCC: 3 | RNVC: 2
MT91402867: RNCC: 5 | RNVC: 9

2 Jul 1975

5120-14-540-0162
Rivet Bucking Bar

145400162
VHP500-102-6: RNCC: 3 | RNVC: 2
VHP500-102-6: RNCC: 5 | RNVC: 2
VHP500-102-6: RNCC: 5 | RNVC: 9

25 Feb 2004

5120-14-201-5665
Scratch Awl

142015665
NO PRIMARY REF14-201-5665: RNCC: 3 | RNVC: 2
108-8M: RNCC: 5 | RNVC: 9

1 Jan 1962

5120-14-514-3819
Open End Box Wrench

145143819
ENFD29468-8X9: RNCC: 3 | RNVC: 2

19 May 1999

5120-14-414-9617
Pipe Wrench

144149617
NO PRIMARY REF14-414-9617: RNCC: 3 | RNVC: 2
137-3 1/2: RNCC: 5 | RNVC: 9

26 Mar 1987

5120-14-458-6202
Hand Beading Tool

144586202
851-601-357-0: RNCC: 3 | RNVC: 2

29 Oct 1992

5120-14-437-4279
Stud Inserter

144374279
16380493: RNCC: 3 | RNVC: 2
16380493: RNCC: 5 | RNVC: 9

31 Jan 1990

5120-14-421-5978
Hand Hydraulic Jack

144215978
7810001: RNCC: 3 | RNVC: 2
89415649: RNCC: 5 | RNVC: 2
7810001: RNCC: 5 | RNVC: 9

20 Jan 1988

5120-14-295-1783
Drive Pin Punch

142951783
000639005P: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-428-3376
Drift Pin Set

144283376
3005363: RNCC: 3 | RNVC: 2

8 Dec 1988

5120-14-422-2386
Socket Wrench

144222386
0372-42-10084: RNCC: 3 | RNVC: 2

24 Feb 1988

5120-14-379-0707
Mechanical Puller

143790707
365A93-3205-00: RNCC: 3 | RNVC: 2

6 Sep 1982

5120-14-210-9841
Socket Wrench

142109841
80-52: RNCC: 3 | RNVC: 2
122-52: RNCC: 3 | RNVC: 9
DEM122-52: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-425-9436
Aligning Punch

144259436
TH20C2-1-3A3: RNCC: 3 | RNVC: 2

28 Jul 1988

5120-14-387-5470
Box Wrench

143875470
17-921-12-06: RNCC: 3 | RNVC: 2

15 Sep 1983

5120-14-437-0704
Seal Inserter

144370704
NO PRIMARY REF14-437-0704: RNCC: 3 | RNVC: 2
287155: RNCC: 5 | RNVC: 9
287155: RNCC: 5 | RNVC: 9

17 Jan 1990

5120-14-329-6384
Box Wrench

143296384
MHC229-22: RNCC: 3 | RNVC: 2
MHC229-22-00: RNCC: 5 | RNVC: 2

2 Jul 1975

5120-14-434-3591
Mechanical Puller

144343591
8815464000: RNCC: 3 | RNVC: 2
89414994: RNCC: 5 | RNVC: 2

20 Sep 1989

5120-14-465-9538
Prick Punch

144659538
480-01Z00ST011-002: RNCC: 3 | RNVC: 2
G6-1964-2: RNCC: 5 | RNVC: 2
G6-1964-02: RNCC: 5 | RNVC: 2
06-1964-02: RNCC: 5 | RNVC: 2

21 Oct 1993

5120-14-483-8572
Box Wrench

144838572
0-30321-2: RNCC: 3 | RNVC: 2

5 Oct 1996

5120-14-232-3906
Brake Repair Pliers

142323906
208-34: RNCC: 3 | RNVC: 2
5574T: RNCC: 3 | RNVC: 9
196.T: RNCC: 5 | RNVC: 2
91505795: RNCC: 5 | RNVC: 2
0145420: RNCC: 5 | RNVC: 2
196T: RNCC: 5 | RNVC: 2
MUL5574T: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-529-1877
Mechanical Puller

145291877
9992658-6: RNCC: 3 | RNVC: 2

15 Mar 2002

5120-14-392-0826
Ratchet Wrench

143920826
853-111-003-0: RNCC: 3 | RNVC: 2

21 Mar 1984

5120-14-517-3814
Seal Inserter

145173814
0XB501-009-303-32: RNCC: 3 | RNVC: 2

8 Dec 1999

5120-14-420-9557
C Clamp

144209557
NO PRIMARY REF14-420-9557: RNCC: 3 | RNVC: 2
271.250: RNCC: 5 | RNVC: 2
0162740: RNCC: 5 | RNVC: 2
271-250: RNCC: 5 | RNVC: 2
91566656: RNCC: 5 | RNVC: 2

6 Jan 1988

5120-14-274-7407
Hand Hydraulic Jack

142747407
P2472: RNCC: 3 | RNVC: 2
262-10-94124-01: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-381-6614
Hand Hammer

143816614
NO PRIMARY REF14-381-6614: RNCC: 3 | RNVC: 2
MASE400B: RNCC: 5 | RNVC: 9

25 Jan 1983

5120-14-367-5835
Socket Wrench

143675835
NO PRIMARY REF14-367-5835: RNCC: 3 | RNVC: 2
C6B1: RNCC: 5 | RNVC: 9

19 Jan 1981

5120-14-532-3851
Box Wrench

145323851
MHD561-28: RNCC: 3 | RNVC: 2

30 Oct 2002

5120-14-428-8441
Mechanical Puller

144288441
20272453: RNCC: 3 | RNVC: 2

22 Dec 1988

5120-14-204-9329
Rack Bar Jack

142049329
F76-028-3T: RNCC: 2 | RNVC: 2

1 Jan 1963

5120-14-323-2076
Socket Wrench

143232076
A5-16BSF: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-201-3143
Socket Wrench

142013143
008525001R: RNCC: 3 | RNVC: 2
2665REP2: RNCC: 5 | RNVC: 9
MR08-103-1: RNCC: 5 | RNVC: 9

1 Jan 1962

5120-14-386-1567
Mechanical Puller

143861567
6801J33-4002-00: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-329-6341
Box Wrench

143296341
M31-072: RNCC: 3 | RNVC: 2
M31-072: RNCC: 5 | RNVC: 9

2 Jul 1975

5120-14-373-7075
Mechanical Puller

143737075
355A93-3140-00: RNCC: 3 | RNVC: 2

13 Nov 1981

5120-14-265-4559
C Clamp

142654559
13-2BIS80: RNCC: 2 | RNVC: 2
450-85: RNCC: 3 | RNVC: 2
3870-85: RNCC: 3 | RNVC: 9
3272670213876: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-444-2737
Box Wrench

144442737
GS146-20: RNCC: 3 | RNVC: 2

21 Dec 1990

5120-14-200-4403
Socket Wrench

142004403
41CLE1736: RNCC: 3 | RNVC: 2

1 Jan 1962

5120-14-541-0040
Aligning Punch

145410040
95MS090-02-3002: RNCC: 3 | RNVC: 2

5 May 2004

5120-14-275-9204
Socket Wrench

142759204
91.30X31: RNCC: 3 | RNVC: 2
3148511276303: RNCC: 5 | RNVC: 2
91-30X31: RNCC: 5 | RNVC: 2
91-30X31-160X12: RNCC: 5 | RNVC: 9
0127630: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-544-7441
Aligning Punch

145447441
6401LOA130300: RNCC: 3 | RNVC: 2

22 Feb 2005

5120-14-476-3056
Mechanical Puller

144763056
9996860: RNCC: 3 | RNVC: 2
RAB3871: RNCC: 5 | RNVC: 2
9996860: RNCC: 5 | RNVC: 9

6 Jun 1995

5120-14-401-4108
Seal Inserter

144014108
332A93-3206-00: RNCC: 3 | RNVC: 2

5 Jun 1985

5120-14-465-4697
Seal Inserter

144654697
851-500-140-0: RNCC: 3 | RNVC: 2

30 Sep 1993

5120-14-395-9050
Drill Guide

143959050
BEC08917: RNCC: 3 | RNVC: 2
BECO-8917: RNCC: 5 | RNVC: 2

30 Oct 1984

5120-14-267-5397
Driftpin

142675397
1221612: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-342-1689
Box Wrench

143421689
321A95-0044-00: RNCC: 3 | RNVC: 2
85-644-1710: RNCC: 6 | RNVC: 9

14 Apr 1977

5120-14-278-3738
Open End Box Wrench

142783738
ECEMAT72-09: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-352-4754
Drive Pin Punch Set

143524754
NO PRIMARY REF14-352-4754: RNCC: 3 | RNVC: 2
251.JS9: RNCC: 5 | RNVC: 2
251JS7: RNCC: 5 | RNVC: 2
251JS9: RNCC: 5 | RNVC: 2
0539110: RNCC: 5 | RNVC: 2
91556290: RNCC: 5 | RNVC: 2

16 Oct 1978

5120-14-231-8952
Socket Wrench

142318952
T06-003-12: RNCC: 2 | RNVC: 2

1 Jan 1967

5120-14-293-7786
Mechanical Puller

142937786
907404: RNCC: 3 | RNVC: 2
907404: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-201-6841
Hand Hammer

142016841
0213300301: RNCC: 3 | RNVC: 2
213-30EC: RNCC: 3 | RNVC: 2

1 Jan 1962

5120-14-303-0843
Socket Wrench

143030843
T34BBC15AREP1: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-216-9332
Drive Pin Punch

142169332
AA7,62NF1-1685: RNCC: 3 | RNVC: 2
AA52-1685: RNCC: 5 | RNVC: 2
AA7-62NF1-1685: RNCC: 5 | RNVC: 2

1 Jan 1965

5120-14-475-0680
Box Wrench

144750680
853-203-212-0: RNCC: 3 | RNVC: 2

16 Mar 1995

5120-14-482-8868
Hand Rivet Set

144828868
0U143056: RNCC: 3 | RNVC: 2
0U143056: RNCC: 5 | RNVC: 2
0U143056: RNCC: 5 | RNVC: 9

1 Aug 1996

5120-14-395-4992
Driftpin

143954992
5-1881B43152-538: RNCC: 3 | RNVC: 2

30 Oct 1984

5120-14-545-6327
Hand Hammer

145456327
153562: RNCC: 3 | RNVC: 2

26 Apr 2005

5120-14-424-0659
Hand Screw Jack

144240659
75545010800: RNCC: 3 | RNVC: 2
755450108: RNCC: 5 | RNVC: 9

11 May 1988

5120-14-510-9849
Hand Hammer

145109849
14202: RNCC: 3 | RNVC: 2

25 Nov 1998

5120-14-373-7804
Bench And Pipe Vise

143737804
282-115: RNCC: 3 | RNVC: 2

13 Nov 1981

5120-14-406-6143
Mechanical Puller

144066143
853-201-114-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-491-2152
Mechanical Puller

144912152
132005: RNCC: 3 | RNVC: 2
F300 0T 001 9060: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-551-9488
Seal Inserter

145519488
50035: RNCC: 3 | RNVC: 2

10 Nov 2006

Load More Results