What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.

A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Blacksmith's Punch?

A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Mechanical Finger?

A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.

A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Screwdriver And Wrench Assembly?

A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Stakeholder Bench Plate?

A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.

What is a Drill Drift?

A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.

A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Digging Bar?

A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

What is a Valve Spring Lifter?

A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.

What is a Fuse Puller?

A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.

Hand Tools, Nonedged, Nonpowered - France (FR)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by France (FR) - NCB is 14

Page 25 of 110

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by France

51	20	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - France (FR)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 16 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Pipe Vise? 19 Items: A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.
What is a Hand Vise? 25 Items: A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.
What is a Hand Hydraulic Jack? 133 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 153 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 903 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 17 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
Swage,Bottom,Blacksmith's 10 Items
What is a Hand Tube Flaring Tool? 23 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Blacksmith's Punch? 12 Items: A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.
What is a Drain Plug Wrench? 45 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 57 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 16 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 3829 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
Flatter,Blacksmith's 18 Items
Swage,Top,Blacksmith's 12 Items
What is a Pipe Wrench? 110 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 149 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 53 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
Screwdriver,Offset 54 Items
What is a Screwdriver Bit? 707 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Mechanical Finger? 25 Items: A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.
What is a Socket Wrench Socket? 1803 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 1412 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 1641 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 52 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 565 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
Jack,Push-Pull,Screw 30 Items
What is a Hand Tube Bender? 54 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 1106 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 55 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pinch Bar? 19 Items: A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.
What is a Pry Bar? 17 Items: A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.
What is a Wrecking Bar? 15 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 273 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 413 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 32 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 295 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
Face,Hammer,Inserted 25 Items
What is a Hole Sheet Metal Holder? 37 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Screwdriver And Wrench Assembly? 11 Items: A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.
What is a Hand Rivet Set? 121 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Stakeholder Bench Plate? 22 Items: A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.
What is a Drill Drift? 32 Items: A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.
What is a Tack Claw? 15 Items: A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.
Mattock 28 Items
What is a Socket Wrench Handle Bar? 108 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Stake,Sheet Metalworking 50 Items
Riveter,Blind,Hand 76 Items
What is a Hand Shovel? 43 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 98 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 30 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
What is a Digging Bar? 20 Items: A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.
Block,Dolly,Sheet Metalworking 56 Items
What is a Piston Ring Compressor? 34 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Valve Spring Lifter? 29 Items: A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.
What is a Fuse Puller? 20 Items: A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.
What is a Hand Lead Seal Press? 18 Items: A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.
What is a Hand Beading Tool? 91 Items: A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.
What is a Hand Hammer? 502 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
Head,Hand Hammer 81 Items
What is a Lamp Extractor? 76 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Tube Packing Ring Installing Tool? 29 Items: A Tube Packing Ring Installing Tool (INSTALLING TOOL,TUBE PACKING RING) is an item designed to insert packing rings on tubes within tube sheets on condensers and similar heat exchangers. In operation, the packing rings are assembled on the loading pin mandrel and are then transferred from the mandrel on to the tube by means of a tubular sleeve which slides on the mandrel.
What is a Carpenters' Pincers? 18 Items: A Carpenters' Pincers (PINCERS,CARPENTERS') is a plierlike hand tool having two opposing jaws which may have hammerlike backs. One handle has a nail or tack pulling claw, the other is shaped to form a screwdriver. The tool may contain a wire cutter. See also NIPPERS, END CUTTING and PINCERS, FARRIERS'.
What is a Trowel? 33 Items: A Trowel is a tool used for bricklaying, concrete work, plastering, linoleum laying, and masonry work. Excludes CORNER TOOL, CONCRETE.
What is a Hand Abrasive Wheel Dresser? 12 Items: A Hand Abrasive Wheel Dresser (DRESSER,ABRASIVE WHEEL,HAND) is a tool designed to remove glaze from, dress, shape, sharpen, and true solid abrasive wheels. Excludes NIB, DIAMOND, WHEEL DRESSING.
What is a Lamp Cap Extractor? 32 Items: A Lamp Cap Extractor (EXTRACTOR,LAMP CAP) is a tool specifically designed to facilitate the removal of lamp caps from switchboards, panels or indicator lamps.
What is a Rivet Bucking Bar? 51 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 86 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 277 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Woven Cable Grip? 23 Items: A Woven Cable Grip (GRIP,CABLE,WOVEN) is a braided wire device designed to clutch a bare or insulated conductor, cable or wire rope, for holding taut or drawing through conduit.
What is a Screw Thread Insert Extractor? 19 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is an Electron Tube Extractor? 18 Items: An Electron Tube Extractor (EXTRACTOR,ELECTRON TUBE) is a hand tool designed to facilitate the removal of electron tubes from electronic equipment and to avoid burning the fingers. It may be used for installing tubes.
What is a Cross Tip Screwdriver? 362 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 21 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 11 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 37 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Tool Handle Wedge? 10 Items: A Tool Handle Wedge (WEDGE,TOOL HANDLE) is excludes WEDGE, WOOD.
What is a Marlinespike? 16 Items: A Marlinespike is a metal hand tool made in the shape of a tapered pin. One end is pointed and the opposite end may be headed. The body may contain an eye for a lanyard sling, or be grooved lengthwise. Excludes CABLE PICK and FID.
What is an Aligning Punch? 272 Items: An Aligning Punch (PUNCH,ALIGNING) is a round, square, hexagonal or octagonal bodied hand tool, having a round tapered section 6-1/2 inches (165.1 mm) or more in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, DRIFT and DRIFTPIN.
What is a Drift Punch? 25 Items: A Drift Punch (PUNCH,DRIFT) is a round, square, hexagonal, or octagonal bodied hand tool, having a round tapered section 4 to 6 inches (101.6 mm to 152.4 mm) inclusive in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, ALIGNING; and DRIFTPIN.
What is a Putty Knife? 36 Items: A Putty Knife (KNIFE,PUTTY) is a hand tool with a nonedged blade fixed to a handle for laying on and smoothing putty and the like.
What is a Socket Wrench Adapter-Extension? 40 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 30 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 184 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Socket Wrench Ratchet Attachment? 47 Items: A Socket Wrench Ratchet Attachment (RATCHET ATTACHMENT,SOCKET WRENCH) is a connection for socket wrenches and handles. Consists of a ratcheting mechanism with an internal drive on one end and an external drive on the opposite end of the same size. The item is designed to permit continuous rotation of the socket in one direction without removing the socket or handle and without a complete rotation of the handle.
What is a Wrench Extension Handle? 81 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Socket Wrench Crowfoot Attachment? 155 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 33 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 43 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 48 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 2394 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 372 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 300 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 661 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 32 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand-Operated Grommet And Eyelet Press? 12 Items: A Hand-Operated Grommet And Eyelet Press (PRESS,GROMMET AND EYELET,HAND-OPERATED) is a device which punches or pierces holes and in addition fastens or sets eyelets and grommets in cloth, paper and similar material. May be used for fastening or setting rivets, lacing hooks and snaps in cloth, paper and similar material. It is hand operated by lever or screw action. See also PUNCH, EYELET, PLIER TYPE and PRESS, GROMMET AND EYELET, FOOT OPERATED.
What is a Claw Bar? 19 Items: A Claw Bar (BAR,CLAW) is before using, refer to Reference Drawing Group AG.
What is a Shock Type Wheel Stud Nut Wrench? 11 Items: A Shock Type Wheel Stud Nut Wrench (WRENCH,WHEEL STUD NUT,SHOCK TYPE) is a manually operated item designed to remove wheel stud nuts. In operation the inner nut is turned by a socket attached to a shaft on which is a loose swinging weighted handle. The weighted handle may be swung quickly to provide an impact force against the socket to loosen the seized or jammed nuts. The outer nut is held stationary by a separate hexagonal holding wrench.
What is a Drift Pin Set? 30 Items: A Drift Pin Set is a group of DRIFTPIN having different characteristics.
What is a Tire Iron? 25 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 115 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Blacksmith's Vise? 14 Items: A Blacksmith's Vise (VISE,BLACKSMITH'S) is a clamping device consisting of a mounting plate, one stationary and one manual screw actuated jaw and a supporting member extending downward from the stationary jaw to the floor. Designed to be mounted on a bench, table or the like. May include pipe holding jaws.
What is a Machinist's Vise? 64 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Clamp Base Bench Vise? 10 Items: A Clamp Base Bench Vise (VISE,BENCH,CLAMP BASE) is a clamping device consisting of a base, one stationary and one manual screw actuated jaw, and one or more guide bars or rods. Designed with an integral clamp for attaching to a bench, table, or the like. Does not include pipe holding jaws.
What is a Fixed Open End Wrench Set? 86 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Nail Set? 11 Items: A Nail Set is a round knurled, square, hexagonal or octagonal bodied hand tool having a round tapered section terminating in a cupped point. It is designed to set brad head nails below the surface by striking it a hammerlike blow. See also PUNCH, DRIVE PIN.
What is a Socket Wrench Set? 202 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is an Open End Box Wrench Set? 10 Items: An Open End Box Wrench Set (WRENCH SET,OPEN END BOX) is a group of WRENCH, OPEN END BOX having different characteristics.
What is a Combination Box And Open End Wrench Set? 72 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Box Wrench Set? 36 Items: A Box Wrench Set (WRENCH SET,BOX) is a group of box wrenches having different characteristics. It may include a HANDLE, EXTENSION WRENCH. See also WRENCH SET, COMBINATION, BOX AND OPEN END.
What is a Hot Line Stick? 26 Items: A Hot Line Stick is a hand tool consisting of a straight, round stick (pole) made of a suitable nonconductive material with a tool fixed to one end. The other end may be plain or have a butt mounting device fixed to it. Various types of attachments (hooks, rings, and bands) may be fixed to the body. It is designed for use in the repair and maintenance of live high voltage aerial lines. Excludes hot line sticks without heads.
Handle,Mattock-Pick 15 Items
What is a Wrench Kit? 73 Items: A Wrench Kit is an assortment of various types and sizes of wrenches such as SOCKET, SOCKET WRENCH; WRENCH, OPEN END, FIXED; WRENCH, BOX and the like. It may include adapter(s), ratchet(s) and the like. See also WRENCH SET (as modified.
What is a Brad Awl? 15 Items: A Brad Awl (AWL,BRAD) is a small, pointed tool used by shoemakers, saddlers, cabinetmakers, and the like for piercing small holes in wood, leather, and similar materials, and consists of a handle with a ferrule and a blade. The blade is round, terminating in a beveled, sharp straight edge and has a shank which passes through the center of the handle.
What is a Scratch Awl? 20 Items: A Scratch Awl (AWL,SCRATCH) is an item whose nominal length of blade is less than 4 inches (101.6 millimeters) and is provided with a nondetachable handle.
What is a Screw Extractor Set? 10 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 102 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
Jack,Scissors,Hand 26 Items
What is a Piston Ring Expander? 23 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
Mallet,Plastic 62 Items
Mallet,Rubber 10 Items
What is a Wood Mallet? 37 Items: A Wood Mallet (MALLET,WOOD) is excludes MALLET, CALKING; MALLET, HAWSING and MALLET, SERVING.
What is a Rack Bar Jack? 30 Items: A Rack Bar Jack (JACK,RACK BAR) is excludes JACK, BUMPER and JACK, REEL, HAND.
What is a Pneumatic Tire Valve Core Inserter And Remover? 14 Items: A Pneumatic Tire Valve Core Inserter And Remover (INSERTER AND REMOVER,PNEUMATIC TIRE VALVE CORE) is a bar of steel having a small cylindrical slotted end for removing or installing a valve core in a valve stem by a screwing motion. See also REPAIR TOOL, PNEUMATIC TIRE VALVE.
What is a Hand Tube Swaging Tool Kit? 20 Items: A Hand Tube Swaging Tool Kit (SWAGING TOOL KIT,TUBE,HAND) is a hand-operated noncutting tool consisting of one or more PUNCH, TUBE SWAGING, HAND and a tube flaring bar.
What is a Hand Tube Flaring Punch? 11 Items: A Hand Tube Flaring Punch (PUNCH,TUBE FLARING,HAND) is a noncutting tool having a shaped end or section designed to flare the ends of tubes. One type is designed to flare the ends of tubes against a tube sheet, and another to flare tube ends to mate with tube fittings. Includes punch components of FLARING TOOL, TUBE, HAND.
What is a Hose Strap Band Clamping Tool? 26 Items: A Hose Strap Band Clamping Tool (CLAMPING TOOL,STRAP BAND,HOSE) is an item designed to tension and lock metal straps around a rubber hose, and the like. It is also used to clamp and hold fittings therein.
What is a Mechanical Puller? 3073 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 470 Items
What is a Slip Joint Pliers? 84 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Brake Repair Pliers? 14 Items: A Brake Repair Pliers (PLIERS,BRAKE REPAIR) is a tool having jaws designed for use in brake repair operations, such as removing and replacing items such as keys, springs, and the like. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 226 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 12 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 81 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 56 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 15 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 11 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 29 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Cross Tip Screwdriver Set? 14 Items: A Cross Tip Screwdriver Set (SCREWDRIVER SET,CROSS TIP) is a group of SCREWDRIVER, CROSS TIP having different characteristics.
What is a Spanner Wrench Set? 18 Items: A Spanner Wrench Set (WRENCH SET,SPANNER) is a group of items under WRENCH, SPANNER having different characteristics.
What is a Drive Pin Punch Set? 31 Items: A Drive Pin Punch Set (PUNCH SET,DRIVE PIN) is a group of PUNCH, DRIVE PIN having different characteristics.
What is an Aligning Punch Set? 13 Items: An Aligning Punch Set (PUNCH SET,ALIGNING) is a group of PUNCH, ALIGNING having different characteristics. See also DRIFTPIN SET.
What is a Slugging Type Box Wrench Socket? 16 Items: A Slugging Type Box Wrench Socket (SOCKET,SLUGGING TYPE BOX WRENCH) is an item having a hexagonal external drive at one end, made to fit into the internal hexagonal or 12-point opening of a slugging type box wrench. The opposite end has a single-broached hexagonal opening of the same size as the external drive. The item is designed with extra thick walls to withstand the impact of sledge blows on the driving wrench.
What is a Mechanical Puller Step Plate? 44 Items: A Mechanical Puller Step Plate (STEP PLATE,MECHANICAL PULLER) is a circular disk, flanged to provide a shoulder, and designed to provide a base for the screw point of a PULLER, MECHANICAL when pulling externally mounted bearings, gears, and the like from hollow shafts or housings. It has a concentric, countersunk hole to accommodate the puller screw point.
What is a Solid Center Punch? 79 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Cable Type Ratchet Lever Puller? 20 Items: A Cable Type Ratchet Lever Puller (PULLER,RATCHET LEVER,CABLE TYPE) is an item consisting of a metal frame and ratchet lever reel to which is attached one end of a flexible cable (wire rope). The cable feeds through the fast eye in the metal frame, and may be reeved through a slip hook tackle hook. See also BINDER, LOAD; HOIST, WIRE ROPE and STRETCHER, WIRE.
What is an Electronic Equipment Tuning Wand? 18 Items: An Electronic Equipment Tuning Wand (TUNING WAND,ELECTRONIC EQUIPMENT) is a hand-held rod used in determining the adjustment of the windings of a radio frequency coil. It is made of insulating material with iron on one end and brass on the other end. By inserting the iron end in the coil, the inductance is increased and by inserting the brass end, the inductance is decreased.
What is a Combination Open End And Spanner Wrench? 14 Items: A Combination Open End And Spanner Wrench (WRENCH,OPEN END AND SPANNER,COMBINATION) is a tool having open end wrench characteristics at one end and spanner wrench features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s) at the other end.
What is a Detent Handling Tool? 187 Items: A Detent Handling Tool (HANDLING TOOL,DETENT) is a specially designed handling tool consisting of a rigid bar with a T-handle on one end. The other end is equipped with threads designed to mate the threads of a detent to facilitate inserting or extracting.
What is a Hand Material Handling Hook? 23 Items: A Hand Material Handling Hook (HOOK,MATERIAL HANDLING,HAND) is a hook whose curved end conforms to Style AP1, AP2, AP3 or AP4 of Reference Drawing Group AP. Excludes HOOK, MANHOLE COVER, HAND; HOOK, WIRE BREAKING, HAND; HOOK, ROCK CRUSHER FEEDING, HAND; HOOK, STRAINER REMOVING, HAND and HOOKS, BAG HANDLING, HAND.
What is a Magnetic Retrieving Tool? 11 Items: A Magnetic Retrieving Tool (RETRIEVING TOOL,MAGNETIC) is a hand-operated magnetic device used to locate and pick up metallic articles, such as bolts, nuts, pins, washers, and the like, in confined spaces. It may be rigid, flexible or adjustable. Excludes FINGER, MECHANICAL.
What is a Mechanical Puller Adapter? 78 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Combination Box And Open End Box Wrench? 13 Items: A Combination Box And Open End Box Wrench (WRENCH,BOX AND OPEN END BOX,COMBINATION) is a double end wrench, box and open end box, primarily designed for removing or replacing tube fittings. The opening in the open end box may be machined at an angle from the longitudinal center line of the wrench.
What is a Screw Thread Insert Inserter? 136 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Flat Tip Screwdriver Set? 48 Items: A Flat Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP) is a group of SCREWDRIVER, FLAT TIP having different characteristics.
What is a Terminal Crimping Tool Contact Positioner? 89 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 16 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is an Adjustable Wrench? 138 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 239 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 75 Items
Handle,Shovel 10 Items
What is a Socket Wrench Spanner Attachment? 88 Items: A Socket Wrench Spanner Attachment (SPANNER ATTACHMENT,SOCKET WRENCH) is an item having an adjustable or fixed span with pin, hook, or key type end that is used to fit and turn various size retaining rings, cover plates, plugs, couplings, and like parts. Usually designed to be driven by a male driver.
What is a Retaining Ring Installation Tool? 44 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Tacker? 16 Items: A Tacker is a hand-operated, hammerlike or gunlike item without a clincher, used to drive preformed connecting elements like pins, nails or staples through one object or piece of material into another. Excludes STAPLER (as modified).
What is a Bearing And Bushing Inserter? 290 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 207 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 939 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 14 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 93 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 161 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 94 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 141 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 53 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Six Point Tip Screwdriver? 155 Items: A Six Point Tip Screwdriver (SCREWDRIVER,SIX POINT TIP) is a manual screwdriver having a single nonremoveable blade having a tip with six rounded points.
What is a Seal Inserter And Remover? 147 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 478 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is a Preformed Packing Inserter And Remover? 34 Items: A Preformed Packing Inserter And Remover (INSERTER AND REMOVER,PREFORMED PACKING) is a hand tool designed to install and remove a PACKING, PREFORMED.
What is a Pin Remover? 34 Items: A Pin Remover (REMOVER,PIN) is a hand tool designed to facilitate the removal of a pin from a hole.
What is a Pin Inserter And Remover? 13 Items: A Pin Inserter And Remover (INSERTER AND REMOVER,PIN) is a rodlike tool designed to facilitate the insertion and removal of a pin from a hole.
What is an Electrical Contact Inserter And Remover? 37 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Piston Inserter? 40 Items: A Piston Inserter (INSERTER,PISTON) is a tool designed to permit installation of a piston or piston assembly without damaging the packings or piston.
What is a Spring Inserter And Remover? 85 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 13 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Stud Inserter? 22 Items: A Stud Inserter (INSERTER,STUD) is a device designed to drive in studs. It does not have any facilities for removing or extracting studs. See also INSERTER AND REMOVER, STUD.
What is a Stud Inserter And Remover? 17 Items: A Stud Inserter And Remover (INSERTER AND REMOVER,STUD) is a group of items designed to extract and to drive studs. It may include collets, guides, housings, holders and the like. See also REMOVER SET, STUD and INSERTER, STUD.
What is a Gear Inserter? 54 Items: A Gear Inserter (INSERTER,GEAR) is a hand tool designed to install various gears onto a gearshaft. It may be operated by a pushing or a striking force.
What is a Crimping Tool Die? 73 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is an Electrical Connector Inserter? 45 Items: An Electrical Connector Inserter (INSERTER,ELECTRICAL CONNECTOR) is a hand tool designed to hold an electrical connector, and to assist in the positioning and installation of the connector on a cover, panel or the like.
What is a Float? 12 Items: A Float is a tool used for concrete, plastering and grouting work.
What is a Mechanical Puller Set? 19 Items: A Mechanical Puller Set (PULLER SET,MECHANICAL) is two or more separate PULLER, MECHANICAL of different fixed sizes.
What is a Lifting Pneumatic Bag? 11 Items: A Lifting Pneumatic Bag (PNEUMATIC BAG,LIFTING) is a device made of flexible material designed to lift another item by being placed under the item and being inflated with air or some other gas. It will have a means of being connected to an air or gas source and may include a connector hose, a control valve and/or a pressure regulator.
What is a Cable Tie Installation Tool? 22 Items: A Cable Tie Installation Tool (INSTALLATION TOOL,CABLE TIE) is a lightweight, hand-held, hand-operated tool designed to fasten cable ties, straps and the like. Cable tie is inserted into the nose of the tool flush to the cable tie head. Trigger handle tightens cable tie and cuts off any excess. These installation tools are available in a variety of sizes depending on their intended use with miniature, intermediate, standard, heavy or extra heavy cross section ties.
What is a Bearing Staking Installation Tool? 159 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
Wrench Set,Ratchet 15 Items
What is a Sealant Dispenser? 26 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Retaining Ring Pliers Set? 10 Items: A Retaining Ring Pliers Set (PLIERS SET,RETAINING RING) is a group of PLIERS, RETAINING RING having different characteristics.
What is a Hand Armament Subsystem Carrier? 52 Items: A Hand Armament Subsystem Carrier (CARRIER,ARMAMENT SUBSYSTEM,HAND) is a metallic item with a clamp device and/or space for depositing articles. It is used for transporting weapon parts during maintanence and/or repair work, such as gun barrel, automatic loader, breechblock and the like.
What is a Ring Retaining Pliers Tip Set? 13 Items: A Ring Retaining Pliers Tip Set (TIP SET,PLIERS,RING RETAINING) is a collection of removable metallic tips in matched pairs used to provide various size capablities to PLIERS, RING RETAINING which permits the removal and installation of internal and external retaining rings.
What is a Plug Electrical Connector Extractor? 45 Items: A Plug Electrical Connector Extractor (EXTRACTOR,ELECTRICAL CONNECTOR,PLUG) is a hand tool designed to disassemble CONNECTOR, PLUG, ELECTRICAL from a CONNECTOR, RECEPTACLE, ELECTRICAL.
What is a Torque Wrench Adapter Set? 10 Items: A Torque Wrench Adapter Set (ADAPTER SET,TORQUE WRENCH) is tWO or more ADAPTER, TORQUE WRENCH of different sizes.
What is an Electronic Component Inserter And Remover? 79 Items: An Electronic Component Inserter And Remover (INSERTER AND REMOVER,ELECTRONIC COMPONENT) is an item which can insert or remove an electronic component package such as MICROCIRCUIT; RESISTOR, NETWORK (as modified); and the like from its mounting position or socket. Excludes INSERTER AND REMOVER, ELECTRICAL CONTACT; REMOVER, ELECTRICAL CONTACT; EXTRACTOR, ELECTRICAL CARD; EXTRACTOR, ELECTRONIC CRYSTAL UNIT; EXTRACTOR, ELECTRON TUBE.
What is an Impact Type Bit Set And Handle Screwdriver? 14 Items: An Impact Type Bit Set And Handle Screwdriver (SCREWDRIVER,BIT SET AND HANDLE,IMPACT TYPE) is an item consisting of a set of screwdriver bits and a impact driver to accommodate the bits of various types and characteristics. It is designed to transmit a strong rotating movement by the impact of a hammer blowed on the impact driver. It is used to loosen rusted or seized screws. Excludes SCREWDRIVER, BIT SET AND HANDLE.
What is a Hand Vise Jaw? 19 Items: A Hand Vise Jaw (JAW,VISE,HAND) is an item consisting of two opposing parts of a VISE, HAND. The item is moveable and able to open and close. It can hold, grasp or clamp work.
What is a Screwdriver Handle? 28 Items: A Screwdriver Handle (HANDLE,SCREWDRIVER) is an item used to accommodate various types of BIT, SCREWDRIVER. It is designed to rotate a bit that is used for installing or removing screws.
What is a Wire Twister Pliers? 25 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 284 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is a Mechanical Puller Body? 45 Items: A Mechanical Puller Body (BODY,PULLER,MECHANICAL) is an item designed to support and enclose the internal parts of a PULLER,MECHANICAL.
What is a Flat Tip And Cross Tip Screwdriver Set? 39 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is a Socket Wrench Screwdriver Attachment Set? 22 Items: A Socket Wrench Screwdriver Attachment Set (SCREWDRIVER ATTACHMENT SET,SOCKET WRENCH) is a set of screwdriver attachment, socket wrench of different sizes. Items consist of a female square drive on one end to attach to a handle, socket wrench and various screwdriver tip configurations on the opposite end. Excludes SCREWDRIVER ATTACHMENT,SOCKET WRENCH
What is an Oil Filter Wrench? 44 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 430 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Communications Equipment Spring Adjuster? 13 Items: A Communications Equipment Spring Adjuster (ADJUSTER,SPRING,COMMUNICATIONS EQUIPMENT) is a single or double end tool, equipped with slot(s) of various dimensions or with cylindrical rod(s), used for adjusting the springs or spring tensioned parts of electronic equipment.
What is a Rotating Members Aligning Tool? 32 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
What is a Final Drive Assembly Alignment Pin? 41 Items: A Final Drive Assembly Alignment Pin (ALIGNMENT PIN,FINAL DRIVE ASSEMBLY) is a special designed pin used in the assembling of the final drive.
Arm,Handling Tool 77 Items
What is a Splicing Sleeve Compressing Tool? 23 Items: A Splicing Sleeve Compressing Tool (COMPRESSING TOOL,SPLICING SLEEVE) is a hand tool having hinged leverage handles similar to a CUTTER, BOLT or pliers, designed to compress a splicing sleeve when joining the ends of two conductors, or when forming an eye splice in the end of a wire rope. Excludes CRIMPING TOOL, TERMINAL, HAND.
What is a Hand Screw Jack Extension? 14 Items: A Hand Screw Jack Extension (EXTENSION,HAND SCREW JACK) is a length of externally threaded rigid shafting which is the adjustable section of a JACK, SCREW, HAND.
What is a Mechanical Puller Gear Adapter? 21 Items: A Mechanical Puller Gear Adapter (GEAR ADAPTER,PULLER,MECHANICAL) is an adapter that adapts a PULLER,MECHANICAL, to pull a certain gear.
Handle,Hydraulic Jack 18 Items
What is a Female Electrical Contact Resizing Tool? 11 Items: A Female Electrical Contact Resizing Tool (RESIZING TOOL,FEMALE ELECTRICAL CONTACT) is a tool designed to shape to a specific size, female contacts such as those used on electrical connectors, tube sockets, crystal sockets, and pin jacks.
What is a Screwdriver And Socket Wrench Combination? 13 Items: A Screwdriver And Socket Wrench Combination is a hand-tool formed into an integral unit with a socket wrench at one end and a screwdriver bit at the other end. See also SCREWDRIVER AND WRENCH ASSEMBLY.
What is a Hand Hose Fitting Swaging Tool Kit? 11 Items: A Hand Hose Fitting Swaging Tool Kit (SWAGING TOOL KIT,HOSE FITTING,HAND) is a device, hydraulically actuated by hand or power operated pump, consisting of face plate, adapter plate, finger cages, fingers, ram, bushing, and expanding mandrels combined on a single base in various functional arrangements. It is used for swaging the outside diameter of hose assembly fittings, expanding the inside diameter of hose assemblies, and securing the fabrication of hose assemblies. Included are a hand or power operated pump, lubricant, cases, and trays.
What is a Catch Lever Tool? 12 Items: A Catch Lever Tool (LEVER TOOL,CATCH) is a specially designed hand tool which engages the opening and closing lever of a CATCH (as modified) for ease of operation. It is constructed of thin rigid material, usually flat, and one end has an engaging tongue.
What is a Manual Impact Wrench? 11 Items: A Manual Impact Wrench (WRENCH,IMPACT,MANUAL) is a manually operated handheld tool consisting of spring-loaded handle and a power-impact head which delivers a torsional impact from either continuous movement of the handle in one direction, or by a reciprocating action. It is used in tightening and loosening fasteners, such as bolts, nuts, and the like. The item may include sockets, extensions and offset fittings, nut runners, and the like.
What is a Drift? 63 Items: A Drift is an item consisting of a tubular body fitted with replaceable tips. It is designed to insert or remove mechanical components where space is restricted.
What is a Nutdriver? 46 Items: A Nutdriver is a non-powered hand tool with a screwdriver style handle, shaft and formed female hex or square socket at driving end.
What is a Locking Device Removal Tool? 12 Items: A Locking Device Removal Tool (REMOVAL TOOL,LOCKING DEVICE) is a hand tool designed to facilitate the removal of a WASHER, KEY and a LOCKING PLATE, NUT AND BOLT.
What is a Hydraulic Fitting Crimping Tool Head? 26 Items: A Hydraulic Fitting Crimping Tool Head (HEAD,CRIMPING TOOL,HYDRAULIC FITTING) is a component of a crimping tool used to compress fittings on fluid tubes. It consists of a U-shape item, in which, are mounted different sizes of DIE, CRIMPING TOOL for tubes of various diameters.
What is a Torque Screwdriver? 11 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.
What is a Special Purpose Combination Wrench? 13 Items: A Special Purpose Combination Wrench (WRENCH,COMBINATION,SPECIAL PURPOSE) is a tool having a combination of ends and facets. The ends may have open end, box or spanner characteristics. The sides may have features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s). Designed to fit specific items, not sized as standard or metric.
What is a Screwdriver Bit Holder? 56 Items: A Screwdriver Bit Holder (HOLDER,SCREWDRIVER BIT) is an attachment with a socket end for accepting male hexagon shank insert bits and a drive end for adapting to a portable power or hand tool.
What is a Telescoping Pole? 16 Items: A Telescoping Pole (POLE,TELESCOPING) is an item which is designed to be extended or compressed by the sliding of overlapping sections. This item may or may not be able to accommodate an extension.

Stock Items From Supply Class 5120 Page 25 of 110

5120-14-314-1565
Box Wrench

143141565
55.18X19: RNCC: 3 | RNVC: 2
105N18X19: RNCC: 3 | RNVC: 2
111-18X19: RNCC: 3 | RNVC: 9
0713 305 189: RNCC: 5 | RNVC: 2
55-18X19: RNCC: 5 | RNVC: 2
3148511111000: RNCC: 5 | RNVC: 2
DEM111-18X19: RNCC: 5 | RNVC: 9
0111100: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-438-4438
Mechanical Puller

144384438
39387739: RNCC: 3 | RNVC: 2

21 Mar 1990

5120-14-401-7488
Trowel

144017488
NO PRIMARY REF14-401-7488: RNCC: 3 | RNVC: 2
2695 975 018: RNCC: 5 | RNVC: 2
1317-24: RNCC: 5 | RNVC: 9

13 Jun 1985

5120-14-472-9017
Mechanical Puller

144729017
332A93-3870-10: RNCC: 3 | RNVC: 2

16 Nov 1994

5120-14-387-1644
Mechanical Puller

143871644
098001-9: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-386-1586
Mechanical Puller

143861586
6801P32-1162-20: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-488-3104
Box Wrench

144883104
59.12X13: RNCC: 3 | RNVC: 2
0113880: RNCC: 5 | RNVC: 2
3148511138809: RNCC: 5 | RNVC: 2
59-12X13: RNCC: 5 | RNVC: 2

30 Apr 1997

5120-14-414-9545
Mallet Handle

144149545
NO PRIMARY REF14-414-9545: RNCC: 3 | RNVC: 2
208-32-1: RNCC: 5 | RNVC: 9

26 Mar 1987

5120-14-376-3785
Box Wrench

143763785
042BBMBAREP10: RNCC: 3 | RNVC: 2

30 Mar 1982

5120-14-352-5144
Mechanical Puller

143525144
8812098000: RNCC: 3 | RNVC: 2

16 Oct 1978

5120-14-205-6894
Mechanical Puller

142056894
VID: RNCC: 3 | RNVC: 2
0362891167: RNCC: 5 | RNVC: 2
362891167: RNCC: 5 | RNVC: 9
ZINVID: RNCC: 5 | RNVC: 9
0362891167: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-451-5225
Screw Extractor

144515225
549767: RNCC: 3 | RNVC: 2

21 Nov 1991

5120-14-220-4122
Rivet Bucking Bar

142204122
AA7-62NF1-1683: RNCC: 3 | RNVC: 2
1683: RNCC: 5 | RNVC: 2
AA52-1683: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-200-8162
Drive Pin Punch

142008162
250-130X10: RNCC: 3 | RNVC: 2

1 Jan 1962

5120-14-377-6511
Gear Inserter

143776511
8810371010: RNCC: 3 | RNVC: 2

10 Jun 1982

5120-14-366-4828
Hand Hammer

143664828
456EC: RNCC: 3 | RNVC: 2
M0B456-29EC: RNCC: 5 | RNVC: 2
456EC29: RNCC: 5 | RNVC: 2

20 Nov 1980

5120-14-540-9007
Pipe Wrench

145409007
3148510197470: RNCC: 3 | RNVC: 2
D.149: RNCC: 5 | RNVC: 2

4 May 2004

5120-14-421-3446
Drift Punch

144213446
537137: RNCC: 3 | RNVC: 2

14 Jan 1988

5120-14-234-3336
Mechanical Puller

142343336
202465: RNCC: 3 | RNVC: 2
FL202465: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-432-3883
Mechanical Puller

144323883
548454: RNCC: 3 | RNVC: 2
00548454: RNCC: 5 | RNVC: 2

7 Jun 1989

5120-14-551-1843
Mechanical Puller

145511843
T631J3001101: RNCC: 3 | RNVC: 2

4 Sep 2006

5120-14-461-6460
Hammer Handle

144616460
6642: RNCC: 3 | RNVC: 2

19 Mar 1993

5120-14-306-2015
Float

143062015
NO PRIMARY REF14-306-2015: RNCC: 3 | RNVC: 2
15-6107-0: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-527-8232
Mechanical Puller

145278232
888-516-800-2: RNCC: 3 | RNVC: 2
888-516-800-1: RNCC: 5 | RNVC: 2

21 Nov 2001

5120-14-416-1221
Hand Hammer

144161221
830-28: RNCC: 3 | RNVC: 9
958-28: RNCC: 5 | RNVC: 9
DEM830-28: RNCC: 5 | RNVC: 9

3 Jun 1987

5120-14-302-4885
Driftpin

143024885
3160S94-82-025: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-531-8858
Seal Inserter

145318858
T632G3015101: RNCC: 3 | RNVC: 2

25 Sep 2002

5120-14-312-7786
Box Wrench

143127786
000MA0324REPA: RNCC: 3 | RNVC: 2
000MA324REPA: RNCC: 5 | RNVC: 2

1 Jan 1974

5120-14-200-3983
Socket Wrench

142003983
41CLE4112: RNCC: 3 | RNVC: 2

1 Jan 1962

5120-14-553-1810
Socket Wrench

145531810
94.19: RNCC: 3 | RNVC: 2

12 Mar 2007

5120-14-371-7458
Socket Wrench Set

143717458
0504420: RNCC: 3 | RNVC: 2
J430U: RNCC: 5 | RNVC: 2
J.430U: RNCC: 5 | RNVC: 2

5 Aug 1981

5120-14-370-8404
Putty Knife

143708404
C0P2976-5: RNCC: 3 | RNVC: 2
130509: RNCC: 5 | RNVC: 2
C0P2976-5: RNCC: 5 | RNVC: 9

5 Jun 1981

5120-14-372-6535
Socket Wrench

143726535
76.25: RNCC: 3 | RNVC: 2
3148511209707: RNCC: 5 | RNVC: 2
76-25: RNCC: 5 | RNVC: 2
2695 612 625: RNCC: 5 | RNVC: 2
0120970: RNCC: 5 | RNVC: 2
250-5399: RNCC: 5 | RNVC: 2
FACOM76.25: RNCC: 5 | RNVC: 9

21 Sep 1981

5120-14-527-8230
Mechanical Puller

145278230
888-516-300-2: RNCC: 3 | RNVC: 2
888-516-300-1: RNCC: 5 | RNVC: 2

21 Nov 2001

5120-14-464-9031
Aligning Punch

144649031
851-912-036-0: RNCC: 3 | RNVC: 2

8 Sep 1993

5120-14-427-8311
Box Wrench

144278311
98 104 144: RNCC: 3 | RNVC: 9
BB 375: RNCC: 5 | RNVC: 9

16 Nov 1988

5120-14-381-2793
Mechanical Puller

143812793
1115: RNCC: 3 | RNVC: 2
5000261115: RNCC: 5 | RNVC: 2
5000261115: RNCC: 5 | RNVC: 9

25 Jan 1983

5120-14-332-2695
Mechanical Puller

143322695
TMX: RNCC: 3 | RNVC: 2
ZINTMX: RNCC: 5 | RNVC: 9

2 Jul 1975

5120-14-541-1877
Mechanical Puller

145411877
0587318: RNCC: 3 | RNVC: 2

18 May 2004

5120-14-487-1093
Mechanical Puller

144871093
U.51B+U.40: RNCC: 3 | RNVC: 2
RAQ0003: RNCC: 5 | RNVC: 2

9 Apr 1997

5120-14-417-8345
Shouldered Shaft

144178345
523007: RNCC: 3 | RNVC: 2

29 Jul 1987

5120-14-427-2270
Mechanical Puller

144272270
46MS047-41: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-441-2168
Aligning Punch

144412168
332A94-2701-13: RNCC: 3 | RNVC: 2

22 Aug 1990

5120-14-479-8087
Socket Wrench

144798087
1104195N00: RNCC: 3 | RNVC: 2

7 Feb 1996

5120-14-440-3036
Hand Shovel

144403036
159310-7: RNCC: 3 | RNVC: 9
89410714: RNCC: 5 | RNVC: 2
159310-7: RNCC: 5 | RNVC: 9

11 Jul 1990

5120-14-218-9655
Box Wrench

142189655
55.1/2X9/16: RNCC: 3 | RNVC: 2
105N1-2X9-16: RNCC: 3 | RNVC: 2
3148511119006: RNCC: 5 | RNVC: 2
55 1-2X9-16: RNCC: 5 | RNVC: 2
SYB0296: RNCC: 5 | RNVC: 2
65 1-2X9-16: RNCC: 5 | RNVC: 9
0111900: RNCC: 5 | RNVC: 9
65-1-2X9-16: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-511-3888
Jaw Cable Grip

145113888
NO PRIMARY REF14-511-3888: RNCC: 3 | RNVC: 2
L426: RNCC: 5 | RNVC: 9
5125AA0009359: RNCC: 6 | RNVC: 9

16 Dec 1998

5120-14-462-9834
Aligning Punch

144629834
T700A2799000013: RNCC: 3 | RNVC: 2

12 May 1993

5120-14-426-6664
Caulking Gun Nozzle

144266664
220585: RNCC: 3 | RNVC: 2
220585: RNCC: 3 | RNVC: 2
91576897: RNCC: 5 | RNVC: 2
8642: RNCC: 5 | RNVC: 2
220585: RNCC: 5 | RNVC: 2

15 Sep 1988

5120-14-303-8562
Mechanical Puller

143038562
33151C: RNCC: 3 | RNVC: 2
33151: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-507-1910
Drive Pin Punch Set

145071910
246.JT6: RNCC: 3 | RNVC: 2
3148515387852: RNCC: 5 | RNVC: 2

17 Jun 1998

5120-14-542-9453
Open End Box Wrench

145429453
8060009: RNCC: 3 | RNVC: 2
8060009: RNCC: 5 | RNVC: 2

14 Aug 2004

5120-14-511-3868
Basin Wrench

145113868
122.38: RNCC: 3 | RNVC: 2
134610: RNCC: 5 | RNVC: 2
3148511346105: RNCC: 5 | RNVC: 2
300-6332: RNCC: 5 | RNVC: 2
FACOM122.38: RNCC: 5 | RNVC: 9

16 Dec 1998

5120-14-380-6777
Plier Clamp

143806777
P8: RNCC: 3 | RNVC: 9
P8: RNCC: 5 | RNVC: 2

29 Nov 1982

5120-14-375-1779
Mechanical Puller

143751779
16380255: RNCC: 3 | RNVC: 2
16380255: RNCC: 5 | RNVC: 9

26 Feb 1982

5120-14-360-4331
Box Wrench

143604331
35AM020: RNCC: 3 | RNVC: 2

23 Nov 1979

5120-14-514-5981
Crimping Tool Die

145145981
0-0484093-1: RNCC: 3 | RNVC: 2
0-0484093-1: RNCC: 5 | RNVC: 2

2 Jun 1999

5120-14-448-8511
Box Wrench

144488511
83-10: RNCC: 3 | RNVC: 2

22 Jul 1991

5120-14-204-8156
Hammer Handle

142048156
E71-011-35: RNCC: 2 | RNVC: 1

1 Jan 1963

5120-14-291-8190
Socket Wrench

142918190
72-60: RNCC: 3 | RNVC: 2
80-60: RNCC: 3 | RNVC: 2
122CM60: RNCC: 3 | RNVC: 9
DEM122CM60: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-236-4613
Box Wrench

142364613
60765MREP1: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-306-3769
Mechanical Puller

143063769
RT13066: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-337-5222
Mechanical Puller

143375222
26545910300: RNCC: 3 | RNVC: 2
265459103: RNCC: 5 | RNVC: 9

7 Oct 1976

5120-14-511-0305
Hand Hammer

145110305
205A.10: RNCC: 3 | RNVC: 2

25 Nov 1998

5120-14-306-4364
Seal Inserter

143064364
8811315001: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-437-4035
Aligning Punch

144374035
NO PRIMARY REF14-437-4035: RNCC: 3 | RNVC: 2
756-00-22: RNCC: 5 | RNVC: 9

31 Jan 1990

5120-14-337-4933
Mechanical Puller

143374933
097500-78: RNCC: 3 | RNVC: 9

7 Oct 1976

5120-14-297-4695
Mechanical Puller

142974695
02640042600: RNCC: 3 | RNVC: 2
102541: RNCC: 5 | RNVC: 2
026400426: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-321-3510
Socket Wrench

143213510
8810120024: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-511-5474
Ratchet Wrench

145115474
68.PE: RNCC: 3 | RNVC: 2
116160: RNCC: 5 | RNVC: 2
3148511161609: RNCC: 5 | RNVC: 2
1118014W00: RNCC: 5 | RNVC: 2

24 Dec 1998

5120-14-316-5587
Mechanical Puller

143165587
321A97-7501-00: RNCC: 3 | RNVC: 2
321-97-7501-00: RNCC: 5 | RNVC: 2
08-533: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-511-6649
Mechanical Puller

145116649
5329-251-000: RNCC: 3 | RNVC: 2
5329-251-000: RNCC: 5 | RNVC: 2

8 Jan 1999

5120-14-212-1851
Driftpin

142121851
6872-2080: RNCC: 3 | RNVC: 2

5 Jul 1980

5120-14-377-6201
Pipe Wrench

143776201
137A.6': RNCC: 3 | RNVC: 2
3148511373736: RNCC: 5 | RNVC: 2
91573119: RNCC: 5 | RNVC: 2
0137373: RNCC: 5 | RNVC: 9
137-6: RNCC: 5 | RNVC: 9

10 Jun 1982

5120-14-468-9158
Ratchet Wrench

144689158
571000196: RNCC: 3 | RNVC: 2

28 Mar 1994

5120-14-360-6458
Mechanical Puller

143606458
8810961002: RNCC: 3 | RNVC: 2

19 Dec 1979

5120-14-462-9864
Aligning Punch

144629864
T700A5799005003: RNCC: 3 | RNVC: 2

12 May 1993

5120-14-399-3426
Aligning Punch

143993426
4601CMV105-0042: RNCC: 3 | RNVC: 2

6 Mar 1985

5120-14-306-3720
Mechanical Puller

143063720
NO PRIMARY REF14-306-3720: RNCC: 3 | RNVC: 2
RT6108: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-530-2073
Open End Box Wrench

145302073
42.1'X1'1/8: RNCC: 3 | RNVC: 2
3148511017906: RNCC: 5 | RNVC: 2

22 May 2002

5120-14-321-5286
Marlinespike

143215286
SA0084-300: RNCC: 3 | RNVC: 2
SYQ1001: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-324-7073
Plastic Mallet

143247073
212A.40: RNCC: 3 | RNVC: 2
3148511484708: RNCC: 5 | RNVC: 2
1134816D00: RNCC: 5 | RNVC: 2
0148470: RNCC: 5 | RNVC: 9
212-40: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-368-5807
Mechanical Puller

143685807
14-18-971-0Y: RNCC: 3 | RNVC: 2

20 Feb 1981

5120-14-397-0876
Mechanical Puller

143970876
8812195000: RNCC: 3 | RNVC: 2

1 Dec 1984

5120-14-551-9969
Screw Extractor

145519969
E-881-4: RNCC: 3 | RNVC: 2
01.42.56.94: RNCC: 5 | RNVC: 2

16 Nov 2006

5120-14-378-2905
Hand Hammer

143782905
154639: RNCC: 3 | RNVC: 2
00.72.99.24: RNCC: 5 | RNVC: 2
79416: RNCC: 5 | RNVC: 9

20 Jul 1982

5120-14-284-0485
Drive Pin Punch

142840485
3CGF94B: RNCC: 3 | RNVC: 2
3CGF94B: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-481-4823
Mechanical Puller

144814823
NO PRIMARY REF14-481-4823: RNCC: 3 | RNVC: 2
806275: RNCC: 5 | RNVC: 9

8 May 1996

5120-14-555-3996
Aligning Punch

145553996
5854098B00: RNCC: 3 | RNVC: 2

7 Nov 2007

5120-14-031-6838
Mechanical Puller

140316838
TMY20-32-320: RNCC: 3 | RNVC: 2

14 Jun 1980

5120-14-399-9405
Mechanical Puller

143999405
043-05-83-01M1: RNCC: 3 | RNVC: 2

24 Apr 1985

5120-14-444-2732
Pipe Wrench

144442732
GS150S-10: RNCC: 3 | RNVC: 2

21 Dec 1990

5120-14-458-6918
Hand Hammer

144586918
463-2: RNCC: 3 | RNVC: 2
91616385: RNCC: 5 | RNVC: 2

29 Oct 1992

5120-14-287-8843
Hammer Handle

142878843
000288006M: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-536-1116
Seal Inserter

145361116
98321: RNCC: 3 | RNVC: 2

9 Jul 2003

5120-14-238-1383
Socket Wrench

142381383
94009A19: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-536-1277
Hand Shovel

145361277
36402680: RNCC: 3 | RNVC: 2

9 Jul 2003

5120-14-389-2180
Drift Pin Set

143892180
MS1538A: RNCC: 3 | RNVC: 2
85-692-3937: RNCC: 6 | RNVC: 9

29 Nov 1983

5120-14-471-5240
Seal Inserter

144715240
NO PRIMARY REF14-471-5240: RNCC: 3 | RNVC: 2
89280748: RNCC: 5 | RNVC: 2
301BA99298: RNCC: 5 | RNVC: 9
301BA99298: RNCC: 5 | RNVC: 9

31 Aug 1994

5120-14-441-2325
Mechanical Puller

144412325
6807E32-2015-00: RNCC: 3 | RNVC: 2

22 Aug 1990

5120-14-426-0304
Drill Guide

144260304
854-600-042-0: RNCC: 3 | RNVC: 2

28 Jul 1988

5120-14-384-1416
Socket Wrench

143841416
NO PRIMARY REF14-384-1416: RNCC: 3 | RNVC: 2
Z22021: RNCC: 5 | RNVC: 9

4 May 1983

5120-14-432-2766
Hand Hammer

144322766
137-4500EC: RNCC: 3 | RNVC: 2
91621539: RNCC: 5 | RNVC: 2

31 May 1989

5120-14-377-6510
Gear Inserter

143776510
8810131156: RNCC: 3 | RNVC: 2

10 Jun 1982

5120-14-404-3334
Box Wrench

144043334
586133: RNCC: 3 | RNVC: 2

15 Oct 1985

5120-14-274-7406
Hand Hydraulic Jack

142747406
P2239A: RNCC: 3 | RNVC: 2
CH25THF365C425A1: RNCC: 5 | RNVC: 2
P2239: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-218-9639
Socket Wrench

142189639
72-11/16: RNCC: 3 | RNVC: 2
80 11/16: RNCC: 3 | RNVC: 2
80 11-16: RNCC: 5 | RNVC: 2
72-11-16: RNCC: 5 | RNVC: 2

1 Jan 1965

5120-14-438-3498
Piston Inserter

144383498
330A98-7511-20: RNCC: 3 | RNVC: 2

14 Mar 1990

5120-14-348-5392
Mechanical Puller

143485392
C47709: RNCC: 3 | RNVC: 2

29 Mar 1978

5120-14-200-8132
Socket Wrench

142008132
4014: RNCC: 3 | RNVC: 2
BD4014: RNCC: 5 | RNVC: 9

1 Jan 1962

5120-14-307-6719
Screw Extractor

143076719
903REP1-2: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-410-3444
Seal Inserter

144103444
8813791000: RNCC: 3 | RNVC: 2

18 Jun 1986

5120-14-425-6809
Hand Rivet Set

144256809
8811813003: RNCC: 3 | RNVC: 2

21 Jul 1988

5120-14-463-3244
Oil Filter Wrench

144633244
0000044500: RNCC: 3 | RNVC: 2

9 Jun 1993

5120-14-274-8503
Socket Wrench

142748503
3107218: RNCC: 3 | RNVC: 2
80-18: RNCC: 3 | RNVC: 2
0117200: RNCC: 3 | RNVC: 2
122-18: RNCC: 3 | RNVC: 9
72.18: RNCC: 5 | RNVC: 2
72-18: RNCC: 5 | RNVC: 2
VIR3107218: RNCC: 5 | RNVC: 9
DEM122-18: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-457-7329
Socket Wrench

144577329
0372-42-10175: RNCC: 3 | RNVC: 2

17 Sep 1992

5120-14-202-2023
Hand Hammer

142022023
179: RNCC: 3 | RNVC: 2
433-1: RNCC: 3 | RNVC: 2

1 Jan 1963

5120-14-237-9550
Drill Guide

142379550
0210840: RNCC: 3 | RNVC: 2
885.G3: RNCC: 5 | RNVC: 2
885G3: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-202-2893
Blacksmiths' Tongs

142022893
M0B32-600: RNCC: 3 | RNVC: 2
MOB32-600: RNCC: 5 | RNVC: 2

1 Jan 1963

5120-14-254-7151
Socket Wrench

142547151
72578M: RNCC: 3 | RNVC: 2

1 Jan 1969

5120-14-358-5266
Mechanical Puller

143585266
8812034200: RNCC: 3 | RNVC: 2

7 Sep 1979

5120-14-255-2906
Mechanical Puller

142552906
02973: RNCC: 3 | RNVC: 2

1 Jan 1969

5120-14-468-2375
Mechanical Puller

144682375
203238: RNCC: 3 | RNVC: 2
365001: RNCC: 3 | RNVC: 2

16 Feb 1994

5120-14-555-2243
Drive Pin Punch

145552243
82148362000: RNCC: 3 | RNVC: 2

10 Oct 2007

5120-14-479-2257
Lamp Cap Extractor

144792257
DO00397679: RNCC: 3 | RNVC: 2
452856-001: RNCC: 5 | RNVC: 2

19 Dec 1995

5120-14-465-4640
Seal Inserter

144654640
851-500-064-0: RNCC: 3 | RNVC: 2

30 Sep 1993

5120-14-517-5083
Box Wrench

145175083
GS146-12X13: RNCC: 3 | RNVC: 2
1.70.1906: RNCC: 5 | RNVC: 2

3 Jan 2000

5120-14-432-7065
Seal Inserter

144327065
OUT11814-3: RNCC: 3 | RNVC: 2
0UT11814-3: RNCC: 5 | RNVC: 2

21 Jun 1989

5120-14-510-2048
Screwdriver Bit Set

145102048
NO PRIMARY REF14-510-2048: RNCC: 3 | RNVC: 2
170 1-4B: RNCC: 5 | RNVC: 9
5120AA8015805: RNCC: 6 | RNVC: 9

4 Nov 1998

5120-14-528-0652
Seal Inserter

145280652
888-513-100-1: RNCC: 3 | RNVC: 2

12 Dec 2001

5120-14-432-3884
Mechanical Puller

144323884
548455: RNCC: 3 | RNVC: 2
00548455: RNCC: 5 | RNVC: 2

7 Jun 1989

5120-14-461-6879
Socket Wrench

144616879
74.T13: RNCC: 3 | RNVC: 2
74T13: RNCC: 5 | RNVC: 2

22 Mar 1993

5120-14-316-5000
Mechanical Puller

143165000
0U50129: RNCC: 3 | RNVC: 2
50129: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-214-3149
Hand Hammer

142143149
200-24: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-520-7059
Hand Rivet Set

145207059
07-135-4704: RNCC: 3 | RNVC: 2

5 Jun 2000

5120-14-446-7178
Seal Inserter

144467178
60920595: RNCC: 3 | RNVC: 2
89280598: RNCC: 5 | RNVC: 2

9 Apr 1991

5120-14-285-2175
Driftpin

142852175
A10-90-134-02-0: RNCC: 3 | RNVC: 2
A10-90-134-02-0: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-343-9653
Open End Box Wrench

143439653
NO PRIMARY REF14-343-9653: RNCC: 3 | RNVC: 2
37-1X1 3-16: RNCC: 5 | RNVC: 2
85-647-3270: RNCC: 6 | RNVC: 9

13 Jul 1977

5120-14-541-0939
Woven Cable Grip

145410939
OT1971402: RNCC: 3 | RNVC: 9
MTA4003: RNCC: 5 | RNVC: 2
NB000078: RNCC: 6 | RNVC: 9

14 May 2004

5120-14-488-6455
Socket Wrench

144886455
DCL 33: RNCC: 3 | RNVC: 9

27 May 1997

5120-14-346-5832
Socket Wrench Set

143465832
74.JL9: RNCC: 3 | RNVC: 2
3148515320804: RNCC: 5 | RNVC: 2
91471029: RNCC: 5 | RNVC: 2
74JL9: RNCC: 5 | RNVC: 2
0532080: RNCC: 5 | RNVC: 9

12 Dec 1977

5120-14-401-4114
Seal Inserter

144014114
332A93-3217-00: RNCC: 3 | RNVC: 2

5 Jun 1985

5120-14-501-5418
Sealant Dispenser

145015418
NO PRIMARY REF14-501-5418: RNCC: 3 | RNVC: 2
9734A1: RNCC: 5 | RNVC: 2
9734-A1: RNCC: 5 | RNVC: 9
9409734A10: RNCC: 5 | RNVC: 9

3 Nov 1997

5120-14-468-0919
Open End Box Wrench

144680919
M4Z6021940801: RNCC: 3 | RNVC: 2

9 Feb 1994

5120-14-232-3056
Box Wrench

142323056
3271-53-1: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-256-7254
Socket Wrench

142567254
P02422: RNCC: 3 | RNVC: 2
0000330556: RNCC: 5 | RNVC: 2
330556: RNCC: 5 | RNVC: 9
0000330556: RNCC: 5 | RNVC: 9

1 Jan 1969

5120-14-296-0272
Drive Pin Punch

142960272
7-25: RNCC: 3 | RNVC: 2
24C9115: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-464-6141
Mechanical Puller

144646141
25145900011: RNCC: 3 | RNVC: 2
026427-00: RNCC: 5 | RNVC: 2
43529566: RNCC: 5 | RNVC: 2

16 Aug 1993

5120-14-300-4172
Socket Wrench

143004172
14-130-012-00: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-431-2692
Drill Guide

144312692
4801B27-10-000: RNCC: 3 | RNVC: 2

12 Apr 1989

5120-14-328-7957
Oil Filter Wrench

143287957
8810547000: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-310-5969
Socket Wrench

143105969
000997070P: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-413-3189
Box Wrench

144133189
50.97: RNCC: 3 | RNVC: 2
3148511072301: RNCC: 5 | RNVC: 2
50-97: RNCC: 5 | RNVC: 2
0107230: RNCC: 5 | RNVC: 9

26 Nov 1986

5120-14-300-7847
Lamp Cap Extractor

143007847
713720002: RNCC: 3 | RNVC: 2
713720002: RNCC: 5 | RNVC: 2
91432222: RNCC: 5 | RNVC: 2
34EM2: RNCC: 5 | RNVC: 2
441125003: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-282-4461
Mechanical Puller

142824461
RK530: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-423-9903
Box Wrench

144239903
254932: RNCC: 3 | RNVC: 2
89414953: RNCC: 5 | RNVC: 2

5 May 1988

5120-14-232-1224
Pipe Wrench

142321224
132-18: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-356-1905
Mechanical Puller

143561905
206482: RNCC: 3 | RNVC: 2

25 Apr 1979

5120-14-427-9451
C Clamp

144279451
M4DS4020902901: RNCC: 3 | RNVC: 2

24 Nov 1988

5120-14-414-2776
Socket Wrench

144142776
BB. 12P: RNCC: 3 | RNVC: 9

28 Jan 1987

5120-14-298-7859
Hand Hammer

142987859
135.1-3500EC: RNCC: 3 | RNVC: 2
3830-3-5: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-374-0860
Box Wrench

143740860
UHC302-41: RNCC: 3 | RNVC: 2

8 Dec 1981

5120-14-555-2680
Socket Wrench

145552680
Y085-010-000A: RNCC: 3 | RNVC: 2

18 Oct 2007

5120-14-382-8824
Mechanical Puller

143828824
U.16B: RNCC: 3 | RNVC: 2
3148510664514: RNCC: 5 | RNVC: 2
U16B: RNCC: 5 | RNVC: 2
0714 52 30: RNCC: 5 | RNVC: 2
130415: RNCC: 5 | RNVC: 9
0066450: RNCC: 5 | RNVC: 9
0066451: RNCC: 5 | RNVC: 9
U.16A: RNCC: 5 | RNVC: 9
U16A: RNCC: 5 | RNVC: 9

17 Feb 1983

5120-14-370-9409
Ratchet Screwdriver

143709409
91467597: RNCC: 3 | RNVC: 2
91467597: RNCC: 3 | RNVC: 9

5 Jun 1981

5120-14-313-7224
Mechanical Puller

143137224
C47019: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-244-4741
Hand Hydraulic Jack

142444741
C35: RNCC: 3 | RNVC: 9
RP: RNCC: 5 | RNVC: 9
RASC35: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-309-7464
Mechanical Puller

143097464
341A98-2036-00: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-406-6582
Mechanical Puller

144066582
853-201-751-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-386-9449
Socket Wrench

143869449
MAT196-0066F38: RNCC: 3 | RNVC: 2
GSM196-011F41: RNCC: 5 | RNVC: 2

24 Aug 1983

5120-14-347-2625
Hand Hammer Head

143472625
E71-014-100: RNCC: 2 | RNVC: 2
1-18: RNCC: 3 | RNVC: 2
3890-18: RNCC: 3 | RNVC: 9

19 Jan 1978

5120-14-511-7460
Socket Wrench Set

145117460
SJ.430AD: RNCC: 3 | RNVC: 2
SJ.430D: RNCC: 5 | RNVC: 2

13 Jan 1999

5120-14-483-8685
Seal Remover

144838685
0-702407-1-1: RNCC: 3 | RNVC: 2

5 Oct 1996

5120-14-546-2231
Crimping Tool Die

145462231
32030-8: RNCC: 3 | RNVC: 2

15 Jun 2005

5120-14-396-0496
Jaw Cable Grip

143960496
05-01-00: RNCC: 3 | RNVC: 2

27 Nov 1984

5120-14-542-9605
Mechanical Puller

145429605
836000: RNCC: 3 | RNVC: 2

14 Aug 2004

5120-14-461-5880
Hand Hydraulic Jack

144615880
J40060M99A12: RNCC: 3 | RNVC: 9

17 Mar 1993

5120-14-272-4058
Box Wrench

142724058
55-1 3-16X1 5-16: RNCC: 3 | RNVC: 2
65-1 3-16X1 5-16: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-512-0268
Sealant Dispenser

145120268
NO PRIMARY REF14-512-0268: RNCC: 3 | RNVC: 2
1473M8: RNCC: 5 | RNVC: 2

3 Feb 1999

5120-14-459-6452
Mechanical Puller

144596452
312-05251-001-W23F2: RNCC: 3 | RNVC: 2

10 Dec 1992

5120-14-424-7225
Hand Hammer

144247225
136A6EC: RNCC: 3 | RNVC: 2
TB3011209: RNCC: 5 | RNVC: 2
239165M: RNCC: 5 | RNVC: 2

7 Jun 1988

5120-14-329-6300
Mechanical Puller

143296300
MS1392: RNCC: 3 | RNVC: 2
MS1392: RNCC: 5 | RNVC: 9

2 Jul 1975

5120-14-390-7600
Hand Hydraulic Jack

143907600
E1191: RNCC: 3 | RNVC: 2

1 Mar 1984

5120-14-329-3274
Mechanical Puller

143293274
14369-5013: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-546-2125
Seal Inserter

145462125
MGF604210001: RNCC: 3 | RNVC: 2

15 Jun 2005

5120-14-401-7489
Trowel

144017489
NO PRIMARY REF14-401-7489: RNCC: 3 | RNVC: 2
2695 975 020: RNCC: 5 | RNVC: 2
846-14: RNCC: 5 | RNVC: 9

13 Jun 1985

5120-14-508-4728
Open End Box Wrench

145084728
42.5/16X3/8: RNCC: 3 | RNVC: 2
0101760: RNCC: 5 | RNVC: 2
3148511017609: RNCC: 5 | RNVC: 2

14 Sep 1998

5120-14-446-4417
Hand Screw Jack

144464417
96069598: RNCC: 3 | RNVC: 2
96069598: RNCC: 5 | RNVC: 2

19 Mar 1991

5120-14-485-8849
Socket Wrench

144858849
K7739-1/4WX5/16W-5/16BSFX3/8BSF: RNCC: 3 | RNVC: 2
1/4WX5/16W-5/16BSFX3/8BSF: RNCC: 5 | RNVC: 2

19 Feb 1997

5120-14-516-9018
Machinist's Scriber

145169018
DELA.1586.00: RNCC: 3 | RNVC: 2

20 Oct 1999

5120-14-440-0135
Aligning Punch

144400135
H140AMV209B: RNCC: 3 | RNVC: 2
H140AMV209B: RNCC: 5 | RNVC: 9

29 Jun 1990

5120-14-529-1947
Seal Inserter

145291947
9991867-4: RNCC: 3 | RNVC: 2

15 Mar 2002

5120-14-202-5463
Machinist's Vise

142025463
SM1609: RNCC: 3 | RNVC: 2

1 Jan 1963

5120-14-363-4654
Box Wrench

143634654
W3140M: RNCC: 3 | RNVC: 9

9 May 1980

5120-14-244-9002
Pipe Wrench

142449002
132-36: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-463-7594
Drive Pin Punch

144637594
251A.6: RNCC: 3 | RNVC: 2
3148511601952: RNCC: 5 | RNVC: 2
0160195: RNCC: 5 | RNVC: 9

28 Jun 1993

5120-14-265-4562
C Clamp

142654562
13-2BIS180: RNCC: 2 | RNVC: 2
271A.200: RNCC: 3 | RNVC: 2
SYQ0800: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-413-3199
Box Wrench

144133199
50.111: RNCC: 3 | RNVC: 2
3148511073704: RNCC: 5 | RNVC: 2
50-111: RNCC: 5 | RNVC: 2
0107370: RNCC: 5 | RNVC: 9

26 Nov 1986

5120-14-406-6564
Mechanical Puller

144066564
853-200-832-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-331-5586
Socket Wrench

143315586
75.15: RNCC: 3 | RNVC: 2
3148511196908: RNCC: 5 | RNVC: 2
75-15: RNCC: 5 | RNVC: 2
250-7496: RNCC: 5 | RNVC: 2
2695 606 615: RNCC: 5 | RNVC: 2
0119690: RNCC: 5 | RNVC: 9
FACOM75.15: RNCC: 5 | RNVC: 9

2 Jul 1975

5120-14-488-3023
Socket Wrench

144883023
T.283: RNCC: 3 | RNVC: 2
0519770: RNCC: 5 | RNVC: 2
T283: RNCC: 5 | RNVC: 2

29 Apr 1997

5120-14-397-1380
Socket Wrench

143971380
66-18X19: RNCC: 3 | RNVC: 2
3148511151006: RNCC: 5 | RNVC: 2
0714 261 719: RNCC: 5 | RNVC: 2

1 Dec 1984

5120-14-517-6532
Aligning Punch

145176532
9403L0S103: RNCC: 3 | RNVC: 2

5 Jan 2000

5120-14-488-5918
Mechanical Puller

144885918
40404001: RNCC: 3 | RNVC: 2

21 May 1997

5120-14-391-3284
Mechanical Puller

143913284
ER8244300336: RNCC: 3 | RNVC: 2

1 Mar 1984

5120-14-414-5461
Hand Hydraulic Jack

144145461
534496: RNCC: 3 | RNVC: 2

11 Feb 1987

5120-14-480-1844
Seal Inserter

144801844
SJ151B9000-15: RNCC: 3 | RNVC: 2
EA2-0313: RNCC: 5 | RNVC: 2

26 Feb 1996

5120-14-401-4125
Mechanical Puller

144014125
332A93-3401-20: RNCC: 3 | RNVC: 2

5 Jun 1985

5120-14-262-9320
Socket Wrench

142629320
NO PRIMARY REF14-262-9320: RNCC: 3 | RNVC: 2
144K415: RNCC: 5 | RNVC: 9

1 Jan 1970

5120-14-392-0819
Socket Wrench

143920819
853-100-028-0: RNCC: 3 | RNVC: 2

21 Mar 1984

5120-14-378-7596
Mechanical Puller

143787596
U41J1: RNCC: 3 | RNVC: 2

11 Aug 1982

5120-14-457-9876
Drill Guide

144579876
538321: RNCC: 3 | RNVC: 2

2 Oct 1992

5120-14-385-0731
Socket Wrench

143850731
990301: RNCC: 3 | RNVC: 2
990301: RNCC: 5 | RNVC: 9

2 Jun 1983

5120-14-427-2428
Mechanical Puller

144272428
46AM049-01-1: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-299-3012
Driftpin

142993012
28449-2: RNCC: 3 | RNVC: 2
2-28449: RNCC: 5 | RNVC: 2
28449-2: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-542-9623
Socket Wrench

145429623
807052: RNCC: 3 | RNVC: 2

14 Aug 2004

5120-14-202-9289
Driftpin

142029289
E71-206-350X16-0CT0G0NAL: RNCC: 2 | RNVC: 2
570P350X16: RNCC: 3 | RNVC: 2
M0B129-350X16: RNCC: 3 | RNVC: 2
283-350: RNCC: 3 | RNVC: 9
0101148: RNCC: 5 | RNVC: 2
210A35: RNCC: 5 | RNVC: 9
7-35: RNCC: 5 | RNVC: 9
G210A35G0LDENBERG: RNCC: 5 | RNVC: 9

1 Jan 1963

5120-14-386-5313
Mechanical Puller

143865313
3160S95-33-050-1: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-511-0565
Hand Hydraulic Jack

145110565
1SH41539010: RNCC: 3 | RNVC: 2

2 Dec 1998

5120-14-530-8327
Socket Wrench

145308327
16580233: RNCC: 3 | RNVC: 9

8 Jul 2002

5120-14-543-4320
Mechanical Puller

145434320
837010: RNCC: 3 | RNVC: 2
837010: RNCC: 5 | RNVC: 2

28 Oct 2004

5120-14-433-3038
Aligning Punch

144333038
853-202-211-0: RNCC: 3 | RNVC: 2

19 Jul 1989

5120-14-043-1504
Hand Screw Jack

140431504
065U20-719865Q: RNCC: 3 | RNVC: 2

10 Apr 1984

5120-14-441-4741
Tire Iron

144414741
35069-99: RNCC: 3 | RNVC: 2
1194: RNCC: 5 | RNVC: 2

29 Aug 1990

5120-14-425-9629
Aligning Punch

144259629
6176: RNCC: 3 | RNVC: 2

28 Jul 1988

5120-14-338-9027
Mechanical Puller

143389027
8812080000: RNCC: 3 | RNVC: 2

17 Dec 1976

5120-14-447-1343
Aligning Punch

144471343
851-931-193-0: RNCC: 3 | RNVC: 2

3 May 1991

5120-14-365-9732
Mechanical Puller

143659732
366A93-3210-00: RNCC: 3 | RNVC: 2

4 Nov 1980

5120-14-329-6336
Mechanical Puller

143296336
M31-063: RNCC: 3 | RNVC: 2
M31-063: RNCC: 5 | RNVC: 9

2 Jul 1975

5120-14-530-6442
Seal Inserter

145306442
D47726R1: RNCC: 3 | RNVC: 2

1 Jul 2002

5120-14-530-2995
Drive Pin Punch

145302995
249.G10: RNCC: 3 | RNVC: 2
3148511594582: RNCC: 5 | RNVC: 2

29 May 2002

5120-14-375-1780
Mechanical Puller

143751780
16380262: RNCC: 3 | RNVC: 2
16380262: RNCC: 5 | RNVC: 9

26 Feb 1982

5120-14-417-4072
Mechanical Puller

144174072
26145900200: RNCC: 3 | RNVC: 2
261459002: RNCC: 5 | RNVC: 9
N581860: RNCC: 5 | RNVC: 9

8 Jul 1987

5120-14-202-5566
Wood Mallet

142025566
767: RNCC: 3 | RNVC: 2

1 Jan 1963

5120-14-302-7727
Hand Vise

143027727
281.100: RNCC: 3 | RNVC: 2
281-100: RNCC: 5 | RNVC: 2
3148511643006: RNCC: 5 | RNVC: 2
0164300: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-445-0103
Hand Beading Tool

144450103
853-600-271-0: RNCC: 3 | RNVC: 2

31 Jan 1991

5120-14-357-7167
Mechanical Puller

143577167
2-1-102369: RNCC: 3 | RNVC: 9

27 Jun 1979

5120-14-352-4887
Mechanical Puller

143524887
24545922600: RNCC: 3 | RNVC: 2
245459226: RNCC: 5 | RNVC: 9

16 Oct 1978

5120-14-527-0587
Mechanical Puller

145270587
45811980: RNCC: 3 | RNVC: 2

26 Sep 2001

5120-14-349-8667
Spanner Wrench Set

143498667
0427-02011: RNCC: 3 | RNVC: 2

14 Jun 1978

5120-14-322-7349
Mechanical Puller

143227349
NO PRIMARY REF14-322-7349: RNCC: 3 | RNVC: 2
3011-78: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-433-3177
Aligning Punch

144333177
853-202-718-0: RNCC: 3 | RNVC: 2

19 Jul 1989

5120-14-481-3947
Mechanical Puller

144813947
3180S95-33-031-1: RNCC: 3 | RNVC: 2
3180-95-33-031-1: RNCC: 5 | RNVC: 2
91914176: RNCC: 5 | RNVC: 2
F300 0T 004 4361: RNCC: 6 | RNVC: 9

1 May 1996

5120-14-553-0741
Hand Hydraulic Jack

145530741
0028620: RNCC: 3 | RNVC: 2

27 Feb 2007

5120-14-443-2602
Crimping Tool Die

144432602
NO PRIMARY REF14-443-2602: RNCC: 3 | RNVC: 2
OSE512: RNCC: 5 | RNVC: 9

14 Nov 1990

5120-14-379-9608
Socket Wrench

143799608
2-25755: RNCC: 3 | RNVC: 2

20 Oct 1982

5120-14-442-3608
Box Wrench

144423608
0108232: RNCC: 3 | RNVC: 2
51.32: RNCC: 5 | RNVC: 2

15 Oct 1990

5120-14-457-3625
Seal Inserter

144573625
45215138: RNCC: 3 | RNVC: 2
45215138: RNCC: 5 | RNVC: 9

27 Aug 1992

5120-14-244-4253
Plastic Mallet

142444253
602-2: RNCC: 3 | RNVC: 2
10-062: RNCC: 3 | RNVC: 2
0UTF37: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-463-9756
Pin Inserter

144639756
854-500-001-0: RNCC: 3 | RNVC: 2

7 Jul 1993

5120-14-422-2526
Driftpin

144222526
8813862012: RNCC: 3 | RNVC: 2

24 Feb 1988

5120-14-410-3508
Mechanical Puller

144103508
8812114000: RNCC: 3 | RNVC: 2

18 Jun 1986

5120-14-213-5584
Socket Wrench

142135584
91.10X11: RNCC: 3 | RNVC: 2
3111217: RNCC: 3 | RNVC: 2
3059000051: RNCC: 5 | RNVC: 2
3148511275306: RNCC: 5 | RNVC: 2
91-10X11: RNCC: 5 | RNVC: 2
99250210102: RNCC: 5 | RNVC: 2
27530: RNCC: 5 | RNVC: 9
VIR3111217: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-292-5888
Socket Wrench

142925888
290P3: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-483-1191
Box Wrench

144831191
55.11/16X3/4: RNCC: 3 | RNVC: 2
3148511119709: RNCC: 5 | RNVC: 2
0111970: RNCC: 5 | RNVC: 9

9 Aug 1996

5120-14-298-7852
Tacker

142987852
NO PRIMARY REF14-298-7852: RNCC: 3 | RNVC: 2
3634-12X5: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-469-9046
Box Wrench

144699046
55.23VSE: RNCC: 3 | RNVC: 2
3148511123539: RNCC: 5 | RNVC: 2
0112353: RNCC: 5 | RNVC: 9

18 May 1994

5120-14-508-7616
Socket Wrench

145087616
74-36: RNCC: 3 | RNVC: 2

30 Sep 1998

5120-14-408-5872
Hand Hammer

144085872
206-28: RNCC: 3 | RNVC: 2
89234479: RNCC: 5 | RNVC: 2
91610031: RNCC: 5 | RNVC: 2

2 Apr 1986

5120-14-201-6837
Hand Hammer

142016837
M0B406EC: RNCC: 3 | RNVC: 2
56BEMMANCHE: RNCC: 5 | RNVC: 9

1 Jan 1962

5120-14-540-6972
Socket Wrench

145406972
38051899: RNCC: 3 | RNVC: 2
ND069614: RNCC: 5 | RNVC: 2
4848ZG8613180672: RNCC: 6 | RNVC: 9

20 Apr 2004

5120-14-279-0610
Socket Wrench Set

142790610
0531800: RNCC: 3 | RNVC: 2
72.JE16: RNCC: 5 | RNVC: 2
72JE16: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-395-3438
Hand Screw Jack

143953438
MAT196-0062: RNCC: 3 | RNVC: 2
A0201-011: RNCC: 5 | RNVC: 2
GSM196-018: RNCC: 5 | RNVC: 2

2 Oct 1984

5120-14-338-9008
Open End Box Wrench

143389008
8811771000: RNCC: 3 | RNVC: 2

17 Dec 1976

5120-14-360-6470
Socket Wrench

143606470
8810153002: RNCC: 3 | RNVC: 2

19 Dec 1979

5120-14-281-1970
Hand Hammer

142811970
M0B316EC: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-301-5360
Socket Wrench

143015360
91-13: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-479-9459
Aligning Punch

144799459
888-351-200-1: RNCC: 3 | RNVC: 2

14 Feb 1996

5120-14-230-5054
Socket Wrench

142305054
92.12: RNCC: 3 | RNVC: 2
3148511279205: RNCC: 5 | RNVC: 2
99030414: RNCC: 5 | RNVC: 2
92-12: RNCC: 5 | RNVC: 2
91367132: RNCC: 5 | RNVC: 2
0127920: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-321-1713
Driftpin

143211713
3130S98-05-016: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-434-9048
Mechanical Puller

144349048
106656: RNCC: 3 | RNVC: 2
GESM827340: RNCC: 5 | RNVC: 2

9 Oct 1989

5120-14-434-8077
Gear Inserter

144348077
8815455003: RNCC: 3 | RNVC: 2
89411405: RNCC: 5 | RNVC: 2

4 Oct 1989

5120-14-392-0832
Open End Box Wrench

143920832
853-115-005-0: RNCC: 3 | RNVC: 2

21 Mar 1984

5120-14-517-8897
Socket Wrench

145178897
GS141-32: RNCC: 3 | RNVC: 2
1.70.1706: RNCC: 5 | RNVC: 2

17 Jan 2000

5120-14-555-4755
Ratchet Wrench

145554755
1653114: RNCC: 3 | RNVC: 2

20 Nov 2007

5120-14-338-6315
Stud Remover

143386315
287B.8: RNCC: 3 | RNVC: 2
287A8: RNCC: 5 | RNVC: 2
287A.8: RNCC: 5 | RNVC: 2
3148511656419: RNCC: 5 | RNVC: 2

17 Dec 1976

5120-14-530-2992
Hand Hammer

145302992
205.F200: RNCC: 3 | RNVC: 2
3148511471371: RNCC: 5 | RNVC: 2

29 May 2002

5120-14-432-7117
Seal Inserter

144327117
OUT50326: RNCC: 3 | RNVC: 2
0UT50326: RNCC: 5 | RNVC: 2

21 Jun 1989

5120-14-480-6766
Socket Wrench

144806766
NO PRIMARY REF14-480-6766: RNCC: 3 | RNVC: 2
45677978: RNCC: 5 | RNVC: 9

21 Mar 1996

5120-14-357-9943
Open End Box Wrench

143579943
MHA088-22: RNCC: 3 | RNVC: 2
MHA088-22: RNCC: 5 | RNVC: 2

20 Jul 1979

5120-14-418-1850
Socket Wrench

144181850
NO PRIMARY REF14-418-1850: RNCC: 3 | RNVC: 2
0121-0600: RNCC: 5 | RNVC: 2

6 Aug 1987

5120-14-232-2559
Box Wrench

142322559
56 5-8X3-4: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-411-9134
Mechanical Puller

144119134
14189190H: RNCC: 3 | RNVC: 2

16 Sep 1986

5120-14-316-5006
Mechanical Puller

143165006
0U50135: RNCC: 3 | RNVC: 2
50135: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-235-6193
Box Wrench

142356193
17926T1REP9: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-441-5417
Socket Wrench

144415417
7511 105 35471: RNCC: 3 | RNVC: 2
7511-105-35471: RNCC: 5 | RNVC: 2
85-694-1462: RNCC: 6 | RNVC: 9

3 Sep 1990

5120-14-510-1361
Hand Hydraulic Jack

145101361
0056633205: RNCC: 3 | RNVC: 2
56633205: RNCC: 5 | RNVC: 2
5120AA8011009: RNCC: 6 | RNVC: 9

4 Nov 1998

5120-14-308-7892
Plier Wrench

143087892
503: RNCC: 3 | RNVC: 2
3148511810002: RNCC: 5 | RNVC: 2

1 Jan 1974

5120-14-294-3522
Mechanical Puller

142943522
8811315000: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-463-1259
Seal Inserter

144631259
8816127000: RNCC: 3 | RNVC: 2
F300 0T 015 2687: RNCC: 5 | RNVC: 9

26 May 1993

5120-14-390-3019
Mechanical Puller

143903019
NO PRIMARY REF14-390-3019: RNCC: 3 | RNVC: 2
BL50360: RNCC: 5 | RNVC: 9
85-692-5322: RNCC: 6 | RNVC: 9

26 Jan 1984

5120-14-555-9279
Hand Hydraulic Jack

145559279
211442-0: RNCC: 3 | RNVC: 2

9 Jan 2008

5120-14-397-0209
Socket Wrench

143970209
7105: RNCC: 3 | RNVC: 2
CLE DOUILLETRIANGULAIRE8MM: RNCC: 5 | RNVC: 2

30 Nov 1984

5120-14-473-0633
Box Wrench

144730633
NF E 74304: RNCC: 2 | RNVC: 2
SYB0349: RNCC: 5 | RNVC: 2
CLE A OEIL 20X23: RNCC: 5 | RNVC: 2

7 Dec 1994

5120-14-417-0996
Socket Wrench

144170996
523063: RNCC: 3 | RNVC: 2

1 Jul 1987

5120-14-361-2749
Hand Hydraulic Jack

143612749
AM15-4: RNCC: 3 | RNVC: 9

24 Jan 1980

5120-14-244-6717
Mechanical Puller

142446717
44854: RNCC: 3 | RNVC: 2
42143: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-265-3218
Box Wrench

142653218
0563-78: RNCC: 3 | RNVC: 2
RA563: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-281-7634
Mechanical Puller

142817634
A124564: RNCC: 3 | RNVC: 2
100122: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-553-1809
Socket Wrench

145531809
94.13: RNCC: 3 | RNVC: 2

12 Mar 2007

5120-14-448-6401
Socket Wrench

144486401
W-1931: RNCC: 3 | RNVC: 9
101 100-36: RNCC: 3 | RNVC: 9

4 Jul 1991

5120-14-445-2529
Socket Wrench

144452529
ELE721: RNCC: 3 | RNVC: 2

6 Feb 1991

5120-14-041-7611
Socket Wrench

140417611
144: RNCC: 3 | RNVC: 9
DEM144: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-317-7942
Mechanical Puller

143177942
NO PRIMARY REF14-317-7942: RNCC: 3 | RNVC: 2
800474-79: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-432-7217
Mechanical Puller

144327217
OUT50156: RNCC: 3 | RNVC: 2
0UT50156: RNCC: 5 | RNVC: 2

21 Jun 1989

5120-14-280-3246
Box Wrench

142803246
301739TREP1: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-410-3513
Mechanical Puller

144103513
8812148000: RNCC: 3 | RNVC: 2

18 Jun 1986

5120-14-478-4739
Seal Inserter

144784739
60915171: RNCC: 3 | RNVC: 2
89280501: RNCC: 5 | RNVC: 2

8 Nov 1995

5120-14-338-9009
Open End Box Wrench

143389009
8811772000: RNCC: 3 | RNVC: 2

17 Dec 1976

5120-14-370-1178
Socket Wrench

143701178
0121405: RNCC: 3 | RNVC: 2
130145: RNCC: 5 | RNVC: 2
77CA: RNCC: 5 | RNVC: 2
77.CA: RNCC: 5 | RNVC: 2

18 May 1981

5120-14-425-3783
Hand Rivet Set

144253783
24C2423-30A1: RNCC: 3 | RNVC: 2

30 Jun 1988

5120-14-425-0967
Hand Hammer

144250967
NO PRIMARY REF14-425-0967: RNCC: 3 | RNVC: 2
259A80: RNCC: 5 | RNVC: 2

21 Jun 1988

5120-14-369-7954
Driftpin

143697954
30AM013-118: RNCC: 3 | RNVC: 2

17 Apr 1981

5120-14-268-0073
Box Wrench

142680073
DE49B4: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-304-4453
Socket Wrench

143044453
NO PRIMARY REF14-304-4453: RNCC: 3 | RNVC: 2
5489: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-447-5422
Socket Wrench

144475422
0130075: RNCC: 3 | RNVC: 2
99 A.15: RNCC: 5 | RNVC: 2
99A.15: RNCC: 5 | RNVC: 2

29 May 1991

5120-14-218-6723
Socket Wrench

142186723
1210: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-461-6876
Socket Wrench

144616876
74.T10: RNCC: 3 | RNVC: 2

22 Mar 1993

5120-14-251-1371
Drift Punch

142511371
M0B229-6: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-352-5448
Box Wrench

143525448
0M594: RNCC: 3 | RNVC: 2
0M594: RNCC: 5 | RNVC: 2

16 Oct 1978

5120-14-447-9976
Seal Inserter

144479976
A37590J: RNCC: 3 | RNVC: 2

12 Jun 1991

5120-14-478-5981
Mechanical Puller

144785981
MGB600-22: RNCC: 3 | RNVC: 2

8 Nov 1995

5120-14-303-0575
Box Wrench

143030575
55.30X32: RNCC: 3 | RNVC: 2
105N30X32: RNCC: 3 | RNVC: 2
111-30X32: RNCC: 3 | RNVC: 9
3148511113608: RNCC: 5 | RNVC: 2
0713 305 302: RNCC: 5 | RNVC: 2
55-30X32: RNCC: 5 | RNVC: 2
0111360: RNCC: 5 | RNVC: 9
DEM111-30X32: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-540-9817
Aligning Punch

145409817
PYC02210: RNCC: 3 | RNVC: 2

5 May 2004

5120-14-283-4961
Mechanical Puller

142834961
207103: RNCC: 3 | RNVC: 2
207103: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-381-9165
Pry Bar

143819165
R085-002Y000A: RNCC: 3 | RNVC: 2

25 Jan 1983

5120-14-471-8088
Drive Pin Punch

144718088
7-90: RNCC: 3 | RNVC: 2
3272670244924: RNCC: 5 | RNVC: 2

14 Sep 1994

5120-14-505-7097
Hand Hammer

145057097
1271202: RNCC: 3 | RNVC: 2
MW1072A00: RNCC: 5 | RNVC: 2

26 Mar 1998

5120-14-222-1018
Drive Pin Punch

142221018
BB425: RNCC: 3 | RNVC: 9

1 Jan 1966

5120-14-373-6780
Open End Box Wrench

143736780
225782: RNCC: 3 | RNVC: 2

13 Nov 1981

5120-14-503-4288
Hand Rivet Set

145034288
853-620-069-0: RNCC: 3 | RNVC: 2

14 Jan 1998

5120-14-312-7785
Box Wrench

143127785
000MA0324REPB: RNCC: 3 | RNVC: 2
000MA324REPB: RNCC: 5 | RNVC: 2

1 Jan 1974

5120-14-529-2692
Plier Wrench

145292692
T5.1L: RNCC: 3 | RNVC: 2
3148510656724: RNCC: 5 | RNVC: 2

20 Mar 2002

5120-14-333-7529
Mechanical Puller

143337529
0065616: RNCC: 3 | RNVC: 2
0000023501: RNCC: 5 | RNVC: 2
T.284: RNCC: 5 | RNVC: 2
T151: RNCC: 5 | RNVC: 2
T284: RNCC: 5 | RNVC: 2
0000023500: RNCC: 5 | RNVC: 2

23 Apr 1976

5120-14-393-0394
Ratchet Wrench

143930394
124C: RNCC: 3 | RNVC: 2
124C: RNCC: 5 | RNVC: 2

12 Apr 1984

5120-14-541-9100
Woven Cable Grip

145419100
SC086136: RNCC: 3 | RNVC: 2
31535: RNCC: 5 | RNVC: 2
31535: RNCC: 5 | RNVC: 2
31535: RNCC: 5 | RNVC: 2

2 Jul 2004

5120-14-504-9470
Basin Wrench

145049470
CLEF094680X00: RNCC: 3 | RNVC: 2

11 Mar 1998

5120-14-319-6809
Box Wrench

143196809
T0318AREP10: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-391-2076
Socket Wrench Set

143912076
M.441E: RNCC: 3 | RNVC: 2
3148515092404: RNCC: 5 | RNVC: 2
0509240: RNCC: 5 | RNVC: 9

1 Mar 1984

5120-14-304-6342
Socket Wrench Set

143046342
NO PRIMARY REF14-304-6342: RNCC: 3 | RNVC: 2
0512820: RNCC: 5 | RNVC: 2
R.450U: RNCC: 5 | RNVC: 2
R450U: RNCC: 5 | RNVC: 2

1 Jan 1974

5120-14-546-6963
Mechanical Puller

145466963
S632V3001101: RNCC: 3 | RNVC: 2

2 Aug 2005

5120-14-552-5445
Hand Hydraulic Jack

145525445
240203: RNCC: 3 | RNVC: 2

15 Jan 2007

5120-14-329-3602
Mechanical Puller

143293602
NO PRIMARY REF14-329-3602: RNCC: 3 | RNVC: 2
98900-78: RNCC: 5 | RNVC: 9

2 Jul 1975

5120-14-469-0580
Mechanical Puller

144690580
091-62-014: RNCC: 3 | RNVC: 2

6 Apr 1994

5120-14-553-6287
Socket Wrench

145536287
99C.16: RNCC: 3 | RNVC: 2
MO003045: RNCC: 6 | RNVC: 9

25 Apr 2007

5120-14-298-7860
Hand Hammer

142987860
2-3000 E.C.: RNCC: 3 | RNVC: 2
3829-3K: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-461-6512
Pry Bar

144616512
PL1DA002OR901027A: RNCC: 3 | RNVC: 2

19 Mar 1993

5120-14-470-7373
Socket Wrench

144707373
20627359: RNCC: 3 | RNVC: 2

4 Jul 1994

5120-14-202-1920
Saddler's Awl Haft

142021920
100-3: RNCC: 3 | RNVC: 2

1 Jan 1963

5120-14-413-0256
Mechanical Puller

144130256
792BE/LOG: RNCC: 3 | RNVC: 2

20 Nov 1986

5120-14-542-9432
Seal Inserter

145429432
8460009: RNCC: 3 | RNVC: 2
8460009: RNCC: 5 | RNVC: 2

14 Aug 2004

5120-14-293-2733
Mechanical Puller

142932733
TMB: RNCC: 3 | RNVC: 2
ZINTMB: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-453-7024
Drive Pin Punch

144537024
1685: RNCC: 3 | RNVC: 2

5 Mar 1992

5120-14-242-2813
Socket Wrench

142422813
35-19: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-352-7134
Box Wrench

143527134
105N25X27: RNCC: 3 | RNVC: 2

14 Nov 1978

5120-14-530-2987
Hand Hammer

145302987
200.F26: RNCC: 3 | RNVC: 2
3148511464410: RNCC: 5 | RNVC: 2

29 May 2002

5120-14-357-9937
Box Wrench

143579937
MHC302-21: RNCC: 3 | RNVC: 2
MHC302-21: RNCC: 5 | RNVC: 2

20 Jul 1979

5120-14-306-4538
Mechanical Puller

143064538
341A93-3412-21: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-485-2746
Mechanical Puller

144852746
202-130-101: RNCC: 3 | RNVC: 9
91642145: RNCC: 5 | RNVC: 2
203-130-101: RNCC: 5 | RNVC: 9
MUL202-130-101: RNCC: 5 | RNVC: 9

15 Jan 1997

5120-14-393-8782
Seal Inserter

143938782
NO PRIMARY REF14-393-8782: RNCC: 3 | RNVC: 2
0U137925: RNCC: 5 | RNVC: 9
OU137925: RNCC: 5 | RNVC: 9

23 Jun 1984

5120-14-539-4510
Screw Extractor

145394510
26145902558: RNCC: 3 | RNVC: 2
SYQ4588: RNCC: 5 | RNVC: 2

14 Jan 2004

5120-14-524-4944
Mechanical Puller

145244944
M47080-1000: RNCC: 3 | RNVC: 2

21 Mar 2001

5120-14-506-2884
Plier Clamp

145062884
443131: RNCC: 3 | RNVC: 2
443131-001: RNCC: 5 | RNVC: 9

22 Apr 1998

5120-14-517-7592
Mechanical Puller

145177592
7M662: RNCC: 3 | RNVC: 2

10 Jan 2000

5120-14-361-4891
Seal Inserter

143614891
8810014102: RNCC: 3 | RNVC: 2
85-691-1829: RNCC: 5 | RNVC: 9

24 Jan 1980

5120-14-403-3590
Open End Box Wrench

144033590
218397: RNCC: 3 | RNVC: 2

21 Aug 1985

5120-14-428-8924
Mechanical Puller

144288924
6803K33-1058-01: RNCC: 3 | RNVC: 2

22 Dec 1988

5120-14-370-9000
Mechanical Puller

143709000
6801R32-1036-20: RNCC: 3 | RNVC: 2
6801366A32-1036-20: RNCC: 5 | RNVC: 2

5 Jun 1981

5120-14-484-4312
Hand Beading Tool

144844312
888-382-400-2: RNCC: 3 | RNVC: 2

14 Nov 1996

5120-14-425-9572
Aligning Punch

144259572
502185NTH20R2: RNCC: 3 | RNVC: 2

28 Jul 1988

5120-14-301-0981
Mechanical Puller

143010981
330A98-3438-01: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-303-6317
Box Wrench

143036317
0D2-35: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-350-5349
Socket Wrench

143505349
006-502-015: RNCC: 3 | RNVC: 2

12 Jul 1978

5120-14-272-7565
Socket Wrench

142727565
D1553-8090: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-251-9104
Drain Plug Wrench

142519104
GSM595-001REP2: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-547-5998
Drill Guide

145475998
GMIOED127-065R: RNCC: 3 | RNVC: 2

18 Oct 2005

5120-14-479-9457
Mechanical Puller

144799457
888-350-000-1: RNCC: 3 | RNVC: 2

14 Feb 1996

5120-14-435-2351
Mechanical Puller

144352351
700017: RNCC: 3 | RNVC: 2

31 Oct 1989

5120-14-428-8841
Mechanical Puller

144288841
350A93-3717-00: RNCC: 3 | RNVC: 2

22 Dec 1988

5120-14-289-7522
Hand Hammer

142897522
520948: RNCC: 3 | RNVC: 2

15 Aug 1996

5120-14-515-1450
Inspection Mirror

145151450
199-35006-000: RNCC: 3 | RNVC: 2
199-35006-900: RNCC: 5 | RNVC: 2

7 Jul 1999

5120-14-527-8234
Seal Inserter

145278234
888-517-000-1: RNCC: 3 | RNVC: 2

21 Nov 2001

5120-14-358-6833
Open End Box Wrench

143586833
702148-00: RNCC: 3 | RNVC: 2

7 Sep 1979

5120-14-369-7942
Box Wrench

143697942
30AM013-0000013: RNCC: 3 | RNVC: 2

17 Apr 1981

5120-14-031-8221
Hand Screw Jack

140318221
5402963J: RNCC: 3 | RNVC: 2
5402963: RNCC: 5 | RNVC: 2
AY623-0A: RNCC: 5 | RNVC: 2

5 Jul 1980

5120-14-528-0649
Seal Inserter

145280649
888-512-800-1: RNCC: 3 | RNVC: 2

12 Dec 2001

5120-14-274-8046
Hammer Handle

142748046
B54522-33U700: RNCC: 2 | RNVC: 2
2-3: RNCC: 3 | RNVC: 2
SYB0310: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-514-3859
Open End Box Wrench

145143859
ENFD29468-22X24: RNCC: 3 | RNVC: 2

19 May 1999

5120-14-485-2210
Mechanical Puller

144852210
332A93-4110-00: RNCC: 3 | RNVC: 2

10 Jan 1997

5120-14-381-0640
Box Wrench

143810640
30AM013-0000019: RNCC: 3 | RNVC: 2

14 Dec 1982

5120-14-520-1222
Mechanical Puller

145201222
899756: RNCC: 3 | RNVC: 2

12 May 2000

5120-14-361-4894
Mechanical Puller

143614894
8810120039: RNCC: 3 | RNVC: 2
85-691-1825: RNCC: 6 | RNVC: 9

24 Jan 1980

5120-14-281-7605
Mechanical Puller

142817605
A121265: RNCC: 3 | RNVC: 2
100025: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-419-2720
Driftpin

144192720
537449: RNCC: 3 | RNVC: 2

16 Oct 1987

5120-14-293-1821
Mechanical Puller

142931821
L1: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-319-4547
Drill Drift

143194547
3130S98-04-016: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-316-5612
Mechanical Puller

143165612
3210-95-32-390: RNCC: 3 | RNVC: 2
08-445: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-485-8841
Socket Wrench

144858841
K7739-NERVUS1/2X9/16AF: RNCC: 3 | RNVC: 2
NERVUS1/2X9/16AF: RNCC: 5 | RNVC: 2

19 Feb 1997

5120-14-466-3810
Mechanical Puller

144663810
6101EAD: RNCC: 3 | RNVC: 2

3 Nov 1993

5120-14-425-9243
Seal Inserter

144259243
600078: RNCC: 3 | RNVC: 2

28 Jul 1988

5120-14-461-0142
Mechanical Puller

144610142
45057275: RNCC: 3 | RNVC: 2
45057275: RNCC: 5 | RNVC: 9

17 Feb 1993

5120-14-404-7533
Lamp Extractor

144047533
492000: RNCC: 3 | RNVC: 2
492000: RNCC: 3 | RNVC: 2
492000: RNCC: 3 | RNVC: 2

20 Nov 1985

5120-14-458-6796
Mechanical Puller

144586796
574080: RNCC: 3 | RNVC: 2

29 Oct 1992

5120-14-444-5359
Box Wrench

144445359
BAZ0401: RNCC: 3 | RNVC: 2

15 Jan 1991

5120-14-520-9676
Seal Inserter

145209676
99374199: RNCC: 3 | RNVC: 9

27 Jun 2000

5120-14-470-0793
Mechanical Puller

144700793
25145900014: RNCC: 3 | RNVC: 2

1 Jun 1994

5120-14-552-4489
Mechanical Puller

145524489
M21490: RNCC: 3 | RNVC: 2

3 Jan 2007

5120-14-306-3738
Box Wrench

143063738
NO PRIMARY REF14-306-3738: RNCC: 3 | RNVC: 2
RT8451: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-424-3466
Drive Pin Punch

144243466
246.4: RNCC: 3 | RNVC: 2
246-4: RNCC: 5 | RNVC: 2
3148511587201: RNCC: 5 | RNVC: 2
0071861D00: RNCC: 5 | RNVC: 2
91606346: RNCC: 5 | RNVC: 2
0158720: RNCC: 5 | RNVC: 9

19 May 1988

5120-14-040-7616
Eyelet Awl

140407616
000181005P: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-405-3271
Socket Wrench

144053271
54189010: RNCC: 3 | RNVC: 2

27 Nov 1985

5120-14-552-3009
Socket Wrench

145523009
B.J16R2A: RNCC: 3 | RNVC: 2

12 Dec 2006

5120-14-419-2856
Hand Shovel

144192856
205920: RNCC: 3 | RNVC: 2
41S3170: RNCC: 5 | RNVC: 2

16 Oct 1987

5120-14-216-7517
Plier Wrench

142167517
501: RNCC: 3 | RNVC: 2
212-25: RNCC: 3 | RNVC: 2
3148511808009: RNCC: 5 | RNVC: 2
3272670280991: RNCC: 5 | RNVC: 2
4235: RNCC: 5 | RNVC: 2
1746: RNCC: 5 | RNVC: 2
0714 09 04: RNCC: 5 | RNVC: 2
2 695 440 880: RNCC: 5 | RNVC: 2
0180800: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-387-2633
Socket Wrench

143872633
8812266000: RNCC: 3 | RNVC: 2

15 Sep 1983

5120-14-402-9704
Hand Hammer

144029704
206-40: RNCC: 3 | RNVC: 2
91556289: RNCC: 5 | RNVC: 2

25 Jul 1985

5120-14-550-5335
Tacker

145505335
R353: RNCC: 3 | RNVC: 2

22 Jun 2006

5120-14-420-8204
Box Wrench

144208204
1814A: RNCC: 3 | RNVC: 2

16 Dec 1987

5120-14-539-5333
Mechanical Puller

145395333
DM.31: RNCC: 3 | RNVC: 2

22 Jan 2004

5120-14-299-9769
Drive Pin Punch

142999769
000636005P: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-280-4102
Ratchet Wrench

142804102
A119628: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-535-0561
Brake Repair Pliers

145350561
D.79A: RNCC: 3 | RNVC: 2

30 Apr 2003

5120-14-308-7838
Socket Wrench Set

143087838
75-SA-20: RNCC: 3 | RNVC: 2
75 SA 20: RNCC: 3 | RNVC: 2
3272670240599: RNCC: 5 | RNVC: 2
S6210: RNCC: 5 | RNVC: 2
S6210: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-534-3242
Socket Wrench

145343242
NNM0099087640814: RNCC: 2 | RNVC: 2

19 Mar 2003

5120-14-262-5510
Mechanical Puller

142625510
0-76387: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-503-5414
Seal Inserter

145035414
70226543: RNCC: 3 | RNVC: 2

20 Jan 1998

5120-14-398-2446
Mechanical Puller

143982446
46AM065: RNCC: 3 | RNVC: 2

31 Jan 1985

5120-14-452-1289
Hand Beading Tool

144521289
45057772: RNCC: 3 | RNVC: 2

18 Dec 1991

5120-14-353-9210
Hand Screw Jack

143539210
16608: RNCC: 3 | RNVC: 2

16 Jan 1979

5120-14-462-9075
Mechanical Puller

144629075
45056346: RNCC: 3 | RNVC: 2
45056346: RNCC: 5 | RNVC: 9

5 May 1993

5120-14-447-3837
Seal Inserter

144473837
MEH238-2: RNCC: 3 | RNVC: 2
89280449: RNCC: 5 | RNVC: 2

15 May 1991

5120-14-294-0717
Pipe Vise

142940717
2002-0: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-506-7653
Mechanical Puller

145067653
M12940: RNCC: 3 | RNVC: 2

14 May 1998

5120-14-316-5574
Mechanical Puller

143165574
321A97-3125-00: RNCC: 3 | RNVC: 2
321-97-3125-00: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-466-0007
Seal Inserter

144660007
0XB501-213-861-04: RNCC: 3 | RNVC: 2

27 Oct 1993

5120-14-487-6648
Socket Wrench

144876648
8969-70002: RNCC: 3 | RNVC: 2

18 Apr 1997

5120-14-449-7724
Drain Plug Wrench

144497724
D.13: RNCC: 3 | RNVC: 2
3148510181981: RNCC: 5 | RNVC: 2
2695 030 100: RNCC: 5 | RNVC: 2
0018198: RNCC: 5 | RNVC: 9

9 Sep 1991

5120-14-521-7214
Socket Wrench

145217214
010092035P: RNCC: 3 | RNVC: 2

8 Sep 2000

5120-14-540-7412
Socket Wrench

145407412
38052106: RNCC: 3 | RNVC: 2
5358010505: RNCC: 5 | RNVC: 2
4848ZG8613181559: RNCC: 6 | RNVC: 9

23 Apr 2004

5120-14-425-9580
Aligning Punch

144259580
502193ZTH20R2: RNCC: 3 | RNVC: 2

28 Jul 1988

5120-14-322-5417
Box Wrench

143225417
50.48: RNCC: 3 | RNVC: 2
3148511067406: RNCC: 5 | RNVC: 2
50-48: RNCC: 5 | RNVC: 2
0106740: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-469-4217
Mechanical Puller

144694217
7M593: RNCC: 3 | RNVC: 2

22 Apr 1994

5120-14-454-0083
Seal Inserter

144540083
OUT60436: RNCC: 3 | RNVC: 2
0UT60436: RNCC: 5 | RNVC: 2

19 Mar 1992

5120-14-274-8037
Hammer Handle

142748037
E71011A38A260: RNCC: 2 | RNVC: 2

1 Jan 1971

5120-14-264-3443
Blacksmiths' Tongs

142643443
3804: RNCC: 3 | RNVC: 9

1 Jan 1970

5120-14-536-4761
Hand Scissors Jack

145364761
NDK6464: RNCC: 3 | RNVC: 2

28 Aug 2003

5120-14-309-9604
Lamp Extractor

143099604
031753820: RNCC: 3 | RNVC: 9
171005: RNCC: 5 | RNVC: 2

1 Jan 1974

5120-14-425-9588
Aligning Punch

144259588
502499MTH20R2: RNCC: 3 | RNVC: 2
502499MTOP7F2: RNCC: 5 | RNVC: 2

28 Jul 1988

5120-14-434-7770
Seal Inserter

144347770
EM403-712-281A: RNCC: 3 | RNVC: 2
EM403-712-281A: RNCC: 5 | RNVC: 9

4 Oct 1989

5120-14-321-0807
Box Wrench

143210807
50.106: RNCC: 3 | RNVC: 2
3148511073209: RNCC: 5 | RNVC: 2
50-106: RNCC: 5 | RNVC: 2
0107320: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-237-4730
Drill Drift

142374730
3130S98-02-019: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-285-2247
Box Wrench

142852247
GSM193-07: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-374-0861
Box Wrench

143740861
UHC303-23: RNCC: 3 | RNVC: 2

8 Dec 1981

5120-14-517-3903
Socket Wrench

145173903
0XB501-252-706-08: RNCC: 3 | RNVC: 2

8 Dec 1999

5120-14-323-2090
Box Wrench

143232090
30-6BAX4BA: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-272-2311
Hand Hydraulic Jack

142722311
P2167: RNCC: 3 | RNVC: 2
2TYPE: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-264-7908
Socket Wrench

142647908
92.27: RNCC: 3 | RNVC: 2
86-27: RNCC: 3 | RNVC: 2
168-27: RNCC: 3 | RNVC: 9
3148511280706: RNCC: 5 | RNVC: 2
92-27: RNCC: 5 | RNVC: 2
3272670212626: RNCC: 5 | RNVC: 2
DEM168-27: RNCC: 5 | RNVC: 9
0128070: RNCC: 5 | RNVC: 9

1 Jan 1970

5120-14-446-4844
Mechanical Puller

144464844
291240Q: RNCC: 3 | RNVC: 2

20 Mar 1991

5120-14-481-8980
Aligning Punch

144818980
HSS831AH791: RNCC: 3 | RNVC: 2
89167408: RNCC: 5 | RNVC: 2

6 Jun 1996

5120-14-466-0009
Seal Inserter

144660009
0XB501-320-000-40: RNCC: 3 | RNVC: 2

27 Oct 1993

5120-14-202-9605
Marlinespike

142029605
NO PRIMARY REF14-202-9605: RNCC: 3 | RNVC: 2
2507BIS25: RNCC: 5 | RNVC: 9

1 Jan 1963

5120-14-474-8917
Hand Hydraulic Jack

144748917
15148-00: RNCC: 3 | RNVC: 2

8 Mar 1995

5120-14-323-2265
Socket Wrench

143232265
SK1-20252: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-306-4358
Box Wrench

143064358
8810048005: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-549-4163
Pipe Wrench

145494163
F1406565: RNCC: 3 | RNVC: 2

31 Mar 2006

5120-14-537-7877
Inspection Mirror

145377877
55M27: RNCC: 3 | RNVC: 2

25 Nov 2003

5120-14-530-2837
Mechanical Puller

145302837
U.53KL2: RNCC: 3 | RNVC: 2
U53KL2: RNCC: 5 | RNVC: 2
3148510703633: RNCC: 5 | RNVC: 2

28 May 2002

5120-14-449-8742
Socket Wrench

144498742
60711: RNCC: 3 | RNVC: 2
91705847: RNCC: 5 | RNVC: 2

11 Sep 1991

5120-14-532-3869
Seal Inserter

145323869
MGF604-23: RNCC: 3 | RNVC: 2

30 Oct 2002

5120-14-342-3615
Box Wrench

143423615
RT21021: RNCC: 3 | RNVC: 2
85-653-7430: RNCC: 6 | RNVC: 9

14 Apr 1977

5120-14-317-0398
Mechanical Puller

143170398
RT4999: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-499-7454
Hand Hammer

144997454
310-30: RNCC: 3 | RNVC: 2
3272670234253: RNCC: 5 | RNVC: 2
F300 0T 023 7332: RNCC: 6 | RNVC: 9

29 Oct 1997

5120-14-305-9364
Socket Wrench

143059364
VTR400-1148: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-216-7479
Ratchet Wrench

142167479
4141-22: RNCC: 3 | RNVC: 2
1660-22: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-420-4004
Open End Box Wrench

144204004
42.36X41: RNCC: 3 | RNVC: 2
3148511017500: RNCC: 5 | RNVC: 2
42-36X41: RNCC: 5 | RNVC: 2
0101750: RNCC: 5 | RNVC: 9

10 Dec 1987

5120-14-514-3823
Open End Box Wrench

145143823
ENFD29468-10X12: RNCC: 3 | RNVC: 2

19 May 1999

5120-14-524-8845
Hand Hammer

145248845
9980951: RNCC: 3 | RNVC: 2

25 Apr 2001

5120-14-040-3046
Box Wrench Set

140403046
RT8638: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-442-7123
Plier Clamp

144427123
114-8: RNCC: 3 | RNVC: 2
114.8: RNCC: 3 | RNVC: 2

24 Oct 1990

5120-14-552-0363
Box Wrench

145520363
68B.17X19H: RNCC: 3 | RNVC: 2
00.28.40.27: RNCC: 5 | RNVC: 2
3148511162477: RNCC: 5 | RNVC: 2

21 Nov 2006

5120-14-468-9822
Mechanical Puller

144689822
40N108129: RNCC: 3 | RNVC: 2

30 Mar 1994

5120-14-529-4318
Mechanical Puller

145294318
6501EAD101: RNCC: 3 | RNVC: 2

29 Mar 2002

5120-14-375-2540
Mechanical Puller

143752540
73-115-030: RNCC: 3 | RNVC: 2

26 Feb 1982

5120-14-294-3518
Mechanical Puller

142943518
8810131050: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-445-0538
Mechanical Puller

144450538
540601: RNCC: 3 | RNVC: 2

31 Jan 1991

5120-14-402-9002
Driftpin

144029002
NO PRIMARY REF14-402-9002: RNCC: 3 | RNVC: 2
M4ZS711D2056: RNCC: 5 | RNVC: 2

25 Jul 1985

5120-14-457-9144
Socket Wrench Set

144579144
S.300-14: RNCC: 3 | RNVC: 2
3148515148750: RNCC: 5 | RNVC: 2
S300-14: RNCC: 5 | RNVC: 2
91727212: RNCC: 5 | RNVC: 2
0514875: RNCC: 5 | RNVC: 2
S300.14: RNCC: 5 | RNVC: 2

30 Sep 1992

5120-14-379-2438
Socket Wrench

143792438
RT8208: RNCC: 3 | RNVC: 2
85-691-9762: RNCC: 6 | RNVC: 9

6 Sep 1982

5120-14-228-7763
C Clamp

142287763
0162660: RNCC: 3 | RNVC: 2
449-100: RNCC: 3 | RNVC: 2
3458100: RNCC: 3 | RNVC: 2
143-100: RNCC: 3 | RNVC: 2
4231-100: RNCC: 3 | RNVC: 9
271-100: RNCC: 5 | RNVC: 2
271.100: RNCC: 5 | RNVC: 2
3272670221581: RNCC: 5 | RNVC: 2
2101: RNCC: 5 | RNVC: 2
143-100: RNCC: 5 | RNVC: 9

1 Jan 1966

5120-14-283-4960
Mechanical Puller

142834960
206997: RNCC: 3 | RNVC: 2
206997: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-490-2069
Mechanical Puller

144902069
F46844: RNCC: 3 | RNVC: 2

17 Sep 1997

5120-14-432-7175
Seal Inserter

144327175
OUT50093: RNCC: 3 | RNVC: 2
0UT50093: RNCC: 5 | RNVC: 2

21 Jun 1989

5120-14-204-9195
Mortar Mixing Hoe

142049195
RAB0TMAC0NPARISM: RNCC: 3 | RNVC: 2

1 Jan 1963

5120-14-429-1406
Mechanical Puller

144291406
536854: RNCC: 3 | RNVC: 2

11 Jan 1989

5120-14-437-0703
Seal Inserter

144370703
NO PRIMARY REF14-437-0703: RNCC: 3 | RNVC: 2
287154: RNCC: 5 | RNVC: 9
287154: RNCC: 5 | RNVC: 9

17 Jan 1990

5120-14-544-1426
Seal Inserter

145441426
27981220V: RNCC: 3 | RNVC: 2

5 Jan 2005

5120-14-362-8086
Mechanical Puller

143628086
9970-121-039: RNCC: 3 | RNVC: 2
9970-121-039-0: RNCC: 5 | RNVC: 2
85-691-1878: RNCC: 6 | RNVC: 9

19 Mar 1980

5120-14-479-6302
Aligning Punch

144796302
888-377-100-1: RNCC: 3 | RNVC: 2

24 Jan 1996

5120-14-527-9147
Seal Inserter

145279147
888-480-400-1: RNCC: 3 | RNVC: 2

28 Nov 2001

5120-14-517-5404
Lamp Extractor

145175404
WA0201: RNCC: 3 | RNVC: 9
285-7555: RNCC: 5 | RNVC: 2

5 Jan 2000

Load More Results