What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.

A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Blacksmith's Punch?

A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Mechanical Finger?

A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.

A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Screwdriver And Wrench Assembly?

A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Stakeholder Bench Plate?

A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.

What is a Drill Drift?

A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.

A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Digging Bar?

A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

What is a Valve Spring Lifter?

A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.

What is a Fuse Puller?

A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.

Hand Tools, Nonedged, Nonpowered - France (FR)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by France (FR) - NCB is 14

Page 24 of 110

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by France

51	20	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - France (FR)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 16 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Pipe Vise? 19 Items: A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.
What is a Hand Vise? 25 Items: A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.
What is a Hand Hydraulic Jack? 133 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 153 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 903 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 17 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
Swage,Bottom,Blacksmith's 10 Items
What is a Hand Tube Flaring Tool? 23 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Blacksmith's Punch? 12 Items: A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.
What is a Drain Plug Wrench? 45 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 57 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 16 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 3829 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
Flatter,Blacksmith's 18 Items
Swage,Top,Blacksmith's 12 Items
What is a Pipe Wrench? 110 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 149 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 53 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
Screwdriver,Offset 54 Items
What is a Screwdriver Bit? 707 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Mechanical Finger? 25 Items: A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.
What is a Socket Wrench Socket? 1803 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 1412 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 1641 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 52 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 565 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
Jack,Push-Pull,Screw 30 Items
What is a Hand Tube Bender? 54 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 1106 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 55 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pinch Bar? 19 Items: A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.
What is a Pry Bar? 17 Items: A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.
What is a Wrecking Bar? 15 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 273 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 413 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 32 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 295 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
Face,Hammer,Inserted 25 Items
What is a Hole Sheet Metal Holder? 37 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Screwdriver And Wrench Assembly? 11 Items: A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.
What is a Hand Rivet Set? 121 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Stakeholder Bench Plate? 22 Items: A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.
What is a Drill Drift? 32 Items: A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.
What is a Tack Claw? 15 Items: A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.
Mattock 28 Items
What is a Socket Wrench Handle Bar? 108 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Stake,Sheet Metalworking 50 Items
Riveter,Blind,Hand 76 Items
What is a Hand Shovel? 43 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 98 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 30 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
What is a Digging Bar? 20 Items: A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.
Block,Dolly,Sheet Metalworking 56 Items
What is a Piston Ring Compressor? 34 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Valve Spring Lifter? 29 Items: A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.
What is a Fuse Puller? 20 Items: A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.
What is a Hand Lead Seal Press? 18 Items: A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.
What is a Hand Beading Tool? 91 Items: A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.
What is a Hand Hammer? 502 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
Head,Hand Hammer 81 Items
What is a Lamp Extractor? 76 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Tube Packing Ring Installing Tool? 29 Items: A Tube Packing Ring Installing Tool (INSTALLING TOOL,TUBE PACKING RING) is an item designed to insert packing rings on tubes within tube sheets on condensers and similar heat exchangers. In operation, the packing rings are assembled on the loading pin mandrel and are then transferred from the mandrel on to the tube by means of a tubular sleeve which slides on the mandrel.
What is a Carpenters' Pincers? 18 Items: A Carpenters' Pincers (PINCERS,CARPENTERS') is a plierlike hand tool having two opposing jaws which may have hammerlike backs. One handle has a nail or tack pulling claw, the other is shaped to form a screwdriver. The tool may contain a wire cutter. See also NIPPERS, END CUTTING and PINCERS, FARRIERS'.
What is a Trowel? 33 Items: A Trowel is a tool used for bricklaying, concrete work, plastering, linoleum laying, and masonry work. Excludes CORNER TOOL, CONCRETE.
What is a Hand Abrasive Wheel Dresser? 12 Items: A Hand Abrasive Wheel Dresser (DRESSER,ABRASIVE WHEEL,HAND) is a tool designed to remove glaze from, dress, shape, sharpen, and true solid abrasive wheels. Excludes NIB, DIAMOND, WHEEL DRESSING.
What is a Lamp Cap Extractor? 32 Items: A Lamp Cap Extractor (EXTRACTOR,LAMP CAP) is a tool specifically designed to facilitate the removal of lamp caps from switchboards, panels or indicator lamps.
What is a Rivet Bucking Bar? 51 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 86 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 277 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Woven Cable Grip? 23 Items: A Woven Cable Grip (GRIP,CABLE,WOVEN) is a braided wire device designed to clutch a bare or insulated conductor, cable or wire rope, for holding taut or drawing through conduit.
What is a Screw Thread Insert Extractor? 19 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is an Electron Tube Extractor? 18 Items: An Electron Tube Extractor (EXTRACTOR,ELECTRON TUBE) is a hand tool designed to facilitate the removal of electron tubes from electronic equipment and to avoid burning the fingers. It may be used for installing tubes.
What is a Cross Tip Screwdriver? 362 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 21 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 11 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 37 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Tool Handle Wedge? 10 Items: A Tool Handle Wedge (WEDGE,TOOL HANDLE) is excludes WEDGE, WOOD.
What is a Marlinespike? 16 Items: A Marlinespike is a metal hand tool made in the shape of a tapered pin. One end is pointed and the opposite end may be headed. The body may contain an eye for a lanyard sling, or be grooved lengthwise. Excludes CABLE PICK and FID.
What is an Aligning Punch? 272 Items: An Aligning Punch (PUNCH,ALIGNING) is a round, square, hexagonal or octagonal bodied hand tool, having a round tapered section 6-1/2 inches (165.1 mm) or more in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, DRIFT and DRIFTPIN.
What is a Drift Punch? 25 Items: A Drift Punch (PUNCH,DRIFT) is a round, square, hexagonal, or octagonal bodied hand tool, having a round tapered section 4 to 6 inches (101.6 mm to 152.4 mm) inclusive in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, ALIGNING; and DRIFTPIN.
What is a Putty Knife? 36 Items: A Putty Knife (KNIFE,PUTTY) is a hand tool with a nonedged blade fixed to a handle for laying on and smoothing putty and the like.
What is a Socket Wrench Adapter-Extension? 40 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 30 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 184 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Socket Wrench Ratchet Attachment? 47 Items: A Socket Wrench Ratchet Attachment (RATCHET ATTACHMENT,SOCKET WRENCH) is a connection for socket wrenches and handles. Consists of a ratcheting mechanism with an internal drive on one end and an external drive on the opposite end of the same size. The item is designed to permit continuous rotation of the socket in one direction without removing the socket or handle and without a complete rotation of the handle.
What is a Wrench Extension Handle? 81 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Socket Wrench Crowfoot Attachment? 155 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 33 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 43 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 48 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 2394 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 372 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 300 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 661 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 32 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand-Operated Grommet And Eyelet Press? 12 Items: A Hand-Operated Grommet And Eyelet Press (PRESS,GROMMET AND EYELET,HAND-OPERATED) is a device which punches or pierces holes and in addition fastens or sets eyelets and grommets in cloth, paper and similar material. May be used for fastening or setting rivets, lacing hooks and snaps in cloth, paper and similar material. It is hand operated by lever or screw action. See also PUNCH, EYELET, PLIER TYPE and PRESS, GROMMET AND EYELET, FOOT OPERATED.
What is a Claw Bar? 19 Items: A Claw Bar (BAR,CLAW) is before using, refer to Reference Drawing Group AG.
What is a Shock Type Wheel Stud Nut Wrench? 11 Items: A Shock Type Wheel Stud Nut Wrench (WRENCH,WHEEL STUD NUT,SHOCK TYPE) is a manually operated item designed to remove wheel stud nuts. In operation the inner nut is turned by a socket attached to a shaft on which is a loose swinging weighted handle. The weighted handle may be swung quickly to provide an impact force against the socket to loosen the seized or jammed nuts. The outer nut is held stationary by a separate hexagonal holding wrench.
What is a Drift Pin Set? 30 Items: A Drift Pin Set is a group of DRIFTPIN having different characteristics.
What is a Tire Iron? 25 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 115 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Blacksmith's Vise? 14 Items: A Blacksmith's Vise (VISE,BLACKSMITH'S) is a clamping device consisting of a mounting plate, one stationary and one manual screw actuated jaw and a supporting member extending downward from the stationary jaw to the floor. Designed to be mounted on a bench, table or the like. May include pipe holding jaws.
What is a Machinist's Vise? 64 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Clamp Base Bench Vise? 10 Items: A Clamp Base Bench Vise (VISE,BENCH,CLAMP BASE) is a clamping device consisting of a base, one stationary and one manual screw actuated jaw, and one or more guide bars or rods. Designed with an integral clamp for attaching to a bench, table, or the like. Does not include pipe holding jaws.
What is a Fixed Open End Wrench Set? 86 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Nail Set? 11 Items: A Nail Set is a round knurled, square, hexagonal or octagonal bodied hand tool having a round tapered section terminating in a cupped point. It is designed to set brad head nails below the surface by striking it a hammerlike blow. See also PUNCH, DRIVE PIN.
What is a Socket Wrench Set? 202 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is an Open End Box Wrench Set? 10 Items: An Open End Box Wrench Set (WRENCH SET,OPEN END BOX) is a group of WRENCH, OPEN END BOX having different characteristics.
What is a Combination Box And Open End Wrench Set? 72 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Box Wrench Set? 36 Items: A Box Wrench Set (WRENCH SET,BOX) is a group of box wrenches having different characteristics. It may include a HANDLE, EXTENSION WRENCH. See also WRENCH SET, COMBINATION, BOX AND OPEN END.
What is a Hot Line Stick? 26 Items: A Hot Line Stick is a hand tool consisting of a straight, round stick (pole) made of a suitable nonconductive material with a tool fixed to one end. The other end may be plain or have a butt mounting device fixed to it. Various types of attachments (hooks, rings, and bands) may be fixed to the body. It is designed for use in the repair and maintenance of live high voltage aerial lines. Excludes hot line sticks without heads.
Handle,Mattock-Pick 15 Items
What is a Wrench Kit? 73 Items: A Wrench Kit is an assortment of various types and sizes of wrenches such as SOCKET, SOCKET WRENCH; WRENCH, OPEN END, FIXED; WRENCH, BOX and the like. It may include adapter(s), ratchet(s) and the like. See also WRENCH SET (as modified.
What is a Brad Awl? 15 Items: A Brad Awl (AWL,BRAD) is a small, pointed tool used by shoemakers, saddlers, cabinetmakers, and the like for piercing small holes in wood, leather, and similar materials, and consists of a handle with a ferrule and a blade. The blade is round, terminating in a beveled, sharp straight edge and has a shank which passes through the center of the handle.
What is a Scratch Awl? 20 Items: A Scratch Awl (AWL,SCRATCH) is an item whose nominal length of blade is less than 4 inches (101.6 millimeters) and is provided with a nondetachable handle.
What is a Screw Extractor Set? 10 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 102 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
Jack,Scissors,Hand 26 Items
What is a Piston Ring Expander? 23 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
Mallet,Plastic 62 Items
Mallet,Rubber 10 Items
What is a Wood Mallet? 37 Items: A Wood Mallet (MALLET,WOOD) is excludes MALLET, CALKING; MALLET, HAWSING and MALLET, SERVING.
What is a Rack Bar Jack? 30 Items: A Rack Bar Jack (JACK,RACK BAR) is excludes JACK, BUMPER and JACK, REEL, HAND.
What is a Pneumatic Tire Valve Core Inserter And Remover? 14 Items: A Pneumatic Tire Valve Core Inserter And Remover (INSERTER AND REMOVER,PNEUMATIC TIRE VALVE CORE) is a bar of steel having a small cylindrical slotted end for removing or installing a valve core in a valve stem by a screwing motion. See also REPAIR TOOL, PNEUMATIC TIRE VALVE.
What is a Hand Tube Swaging Tool Kit? 20 Items: A Hand Tube Swaging Tool Kit (SWAGING TOOL KIT,TUBE,HAND) is a hand-operated noncutting tool consisting of one or more PUNCH, TUBE SWAGING, HAND and a tube flaring bar.
What is a Hand Tube Flaring Punch? 11 Items: A Hand Tube Flaring Punch (PUNCH,TUBE FLARING,HAND) is a noncutting tool having a shaped end or section designed to flare the ends of tubes. One type is designed to flare the ends of tubes against a tube sheet, and another to flare tube ends to mate with tube fittings. Includes punch components of FLARING TOOL, TUBE, HAND.
What is a Hose Strap Band Clamping Tool? 26 Items: A Hose Strap Band Clamping Tool (CLAMPING TOOL,STRAP BAND,HOSE) is an item designed to tension and lock metal straps around a rubber hose, and the like. It is also used to clamp and hold fittings therein.
What is a Mechanical Puller? 3073 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 470 Items
What is a Slip Joint Pliers? 84 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Brake Repair Pliers? 14 Items: A Brake Repair Pliers (PLIERS,BRAKE REPAIR) is a tool having jaws designed for use in brake repair operations, such as removing and replacing items such as keys, springs, and the like. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 226 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 12 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 81 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 56 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 15 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 11 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 29 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Cross Tip Screwdriver Set? 14 Items: A Cross Tip Screwdriver Set (SCREWDRIVER SET,CROSS TIP) is a group of SCREWDRIVER, CROSS TIP having different characteristics.
What is a Spanner Wrench Set? 18 Items: A Spanner Wrench Set (WRENCH SET,SPANNER) is a group of items under WRENCH, SPANNER having different characteristics.
What is a Drive Pin Punch Set? 31 Items: A Drive Pin Punch Set (PUNCH SET,DRIVE PIN) is a group of PUNCH, DRIVE PIN having different characteristics.
What is an Aligning Punch Set? 13 Items: An Aligning Punch Set (PUNCH SET,ALIGNING) is a group of PUNCH, ALIGNING having different characteristics. See also DRIFTPIN SET.
What is a Slugging Type Box Wrench Socket? 16 Items: A Slugging Type Box Wrench Socket (SOCKET,SLUGGING TYPE BOX WRENCH) is an item having a hexagonal external drive at one end, made to fit into the internal hexagonal or 12-point opening of a slugging type box wrench. The opposite end has a single-broached hexagonal opening of the same size as the external drive. The item is designed with extra thick walls to withstand the impact of sledge blows on the driving wrench.
What is a Mechanical Puller Step Plate? 44 Items: A Mechanical Puller Step Plate (STEP PLATE,MECHANICAL PULLER) is a circular disk, flanged to provide a shoulder, and designed to provide a base for the screw point of a PULLER, MECHANICAL when pulling externally mounted bearings, gears, and the like from hollow shafts or housings. It has a concentric, countersunk hole to accommodate the puller screw point.
What is a Solid Center Punch? 79 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Cable Type Ratchet Lever Puller? 20 Items: A Cable Type Ratchet Lever Puller (PULLER,RATCHET LEVER,CABLE TYPE) is an item consisting of a metal frame and ratchet lever reel to which is attached one end of a flexible cable (wire rope). The cable feeds through the fast eye in the metal frame, and may be reeved through a slip hook tackle hook. See also BINDER, LOAD; HOIST, WIRE ROPE and STRETCHER, WIRE.
What is an Electronic Equipment Tuning Wand? 18 Items: An Electronic Equipment Tuning Wand (TUNING WAND,ELECTRONIC EQUIPMENT) is a hand-held rod used in determining the adjustment of the windings of a radio frequency coil. It is made of insulating material with iron on one end and brass on the other end. By inserting the iron end in the coil, the inductance is increased and by inserting the brass end, the inductance is decreased.
What is a Combination Open End And Spanner Wrench? 14 Items: A Combination Open End And Spanner Wrench (WRENCH,OPEN END AND SPANNER,COMBINATION) is a tool having open end wrench characteristics at one end and spanner wrench features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s) at the other end.
What is a Detent Handling Tool? 187 Items: A Detent Handling Tool (HANDLING TOOL,DETENT) is a specially designed handling tool consisting of a rigid bar with a T-handle on one end. The other end is equipped with threads designed to mate the threads of a detent to facilitate inserting or extracting.
What is a Hand Material Handling Hook? 23 Items: A Hand Material Handling Hook (HOOK,MATERIAL HANDLING,HAND) is a hook whose curved end conforms to Style AP1, AP2, AP3 or AP4 of Reference Drawing Group AP. Excludes HOOK, MANHOLE COVER, HAND; HOOK, WIRE BREAKING, HAND; HOOK, ROCK CRUSHER FEEDING, HAND; HOOK, STRAINER REMOVING, HAND and HOOKS, BAG HANDLING, HAND.
What is a Magnetic Retrieving Tool? 11 Items: A Magnetic Retrieving Tool (RETRIEVING TOOL,MAGNETIC) is a hand-operated magnetic device used to locate and pick up metallic articles, such as bolts, nuts, pins, washers, and the like, in confined spaces. It may be rigid, flexible or adjustable. Excludes FINGER, MECHANICAL.
What is a Mechanical Puller Adapter? 78 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Combination Box And Open End Box Wrench? 13 Items: A Combination Box And Open End Box Wrench (WRENCH,BOX AND OPEN END BOX,COMBINATION) is a double end wrench, box and open end box, primarily designed for removing or replacing tube fittings. The opening in the open end box may be machined at an angle from the longitudinal center line of the wrench.
What is a Screw Thread Insert Inserter? 136 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Flat Tip Screwdriver Set? 48 Items: A Flat Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP) is a group of SCREWDRIVER, FLAT TIP having different characteristics.
What is a Terminal Crimping Tool Contact Positioner? 89 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 16 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is an Adjustable Wrench? 138 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 239 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 75 Items
Handle,Shovel 10 Items
What is a Socket Wrench Spanner Attachment? 88 Items: A Socket Wrench Spanner Attachment (SPANNER ATTACHMENT,SOCKET WRENCH) is an item having an adjustable or fixed span with pin, hook, or key type end that is used to fit and turn various size retaining rings, cover plates, plugs, couplings, and like parts. Usually designed to be driven by a male driver.
What is a Retaining Ring Installation Tool? 44 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Tacker? 16 Items: A Tacker is a hand-operated, hammerlike or gunlike item without a clincher, used to drive preformed connecting elements like pins, nails or staples through one object or piece of material into another. Excludes STAPLER (as modified).
What is a Bearing And Bushing Inserter? 290 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 207 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 939 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 14 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 93 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 161 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 94 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 141 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 53 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Six Point Tip Screwdriver? 155 Items: A Six Point Tip Screwdriver (SCREWDRIVER,SIX POINT TIP) is a manual screwdriver having a single nonremoveable blade having a tip with six rounded points.
What is a Seal Inserter And Remover? 147 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 478 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is a Preformed Packing Inserter And Remover? 34 Items: A Preformed Packing Inserter And Remover (INSERTER AND REMOVER,PREFORMED PACKING) is a hand tool designed to install and remove a PACKING, PREFORMED.
What is a Pin Remover? 34 Items: A Pin Remover (REMOVER,PIN) is a hand tool designed to facilitate the removal of a pin from a hole.
What is a Pin Inserter And Remover? 13 Items: A Pin Inserter And Remover (INSERTER AND REMOVER,PIN) is a rodlike tool designed to facilitate the insertion and removal of a pin from a hole.
What is an Electrical Contact Inserter And Remover? 37 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Piston Inserter? 40 Items: A Piston Inserter (INSERTER,PISTON) is a tool designed to permit installation of a piston or piston assembly without damaging the packings or piston.
What is a Spring Inserter And Remover? 85 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 13 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Stud Inserter? 22 Items: A Stud Inserter (INSERTER,STUD) is a device designed to drive in studs. It does not have any facilities for removing or extracting studs. See also INSERTER AND REMOVER, STUD.
What is a Stud Inserter And Remover? 17 Items: A Stud Inserter And Remover (INSERTER AND REMOVER,STUD) is a group of items designed to extract and to drive studs. It may include collets, guides, housings, holders and the like. See also REMOVER SET, STUD and INSERTER, STUD.
What is a Gear Inserter? 54 Items: A Gear Inserter (INSERTER,GEAR) is a hand tool designed to install various gears onto a gearshaft. It may be operated by a pushing or a striking force.
What is a Crimping Tool Die? 73 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is an Electrical Connector Inserter? 45 Items: An Electrical Connector Inserter (INSERTER,ELECTRICAL CONNECTOR) is a hand tool designed to hold an electrical connector, and to assist in the positioning and installation of the connector on a cover, panel or the like.
What is a Float? 12 Items: A Float is a tool used for concrete, plastering and grouting work.
What is a Mechanical Puller Set? 19 Items: A Mechanical Puller Set (PULLER SET,MECHANICAL) is two or more separate PULLER, MECHANICAL of different fixed sizes.
What is a Lifting Pneumatic Bag? 11 Items: A Lifting Pneumatic Bag (PNEUMATIC BAG,LIFTING) is a device made of flexible material designed to lift another item by being placed under the item and being inflated with air or some other gas. It will have a means of being connected to an air or gas source and may include a connector hose, a control valve and/or a pressure regulator.
What is a Cable Tie Installation Tool? 22 Items: A Cable Tie Installation Tool (INSTALLATION TOOL,CABLE TIE) is a lightweight, hand-held, hand-operated tool designed to fasten cable ties, straps and the like. Cable tie is inserted into the nose of the tool flush to the cable tie head. Trigger handle tightens cable tie and cuts off any excess. These installation tools are available in a variety of sizes depending on their intended use with miniature, intermediate, standard, heavy or extra heavy cross section ties.
What is a Bearing Staking Installation Tool? 159 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
Wrench Set,Ratchet 15 Items
What is a Sealant Dispenser? 26 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Retaining Ring Pliers Set? 10 Items: A Retaining Ring Pliers Set (PLIERS SET,RETAINING RING) is a group of PLIERS, RETAINING RING having different characteristics.
What is a Hand Armament Subsystem Carrier? 52 Items: A Hand Armament Subsystem Carrier (CARRIER,ARMAMENT SUBSYSTEM,HAND) is a metallic item with a clamp device and/or space for depositing articles. It is used for transporting weapon parts during maintanence and/or repair work, such as gun barrel, automatic loader, breechblock and the like.
What is a Ring Retaining Pliers Tip Set? 13 Items: A Ring Retaining Pliers Tip Set (TIP SET,PLIERS,RING RETAINING) is a collection of removable metallic tips in matched pairs used to provide various size capablities to PLIERS, RING RETAINING which permits the removal and installation of internal and external retaining rings.
What is a Plug Electrical Connector Extractor? 45 Items: A Plug Electrical Connector Extractor (EXTRACTOR,ELECTRICAL CONNECTOR,PLUG) is a hand tool designed to disassemble CONNECTOR, PLUG, ELECTRICAL from a CONNECTOR, RECEPTACLE, ELECTRICAL.
What is a Torque Wrench Adapter Set? 10 Items: A Torque Wrench Adapter Set (ADAPTER SET,TORQUE WRENCH) is tWO or more ADAPTER, TORQUE WRENCH of different sizes.
What is an Electronic Component Inserter And Remover? 79 Items: An Electronic Component Inserter And Remover (INSERTER AND REMOVER,ELECTRONIC COMPONENT) is an item which can insert or remove an electronic component package such as MICROCIRCUIT; RESISTOR, NETWORK (as modified); and the like from its mounting position or socket. Excludes INSERTER AND REMOVER, ELECTRICAL CONTACT; REMOVER, ELECTRICAL CONTACT; EXTRACTOR, ELECTRICAL CARD; EXTRACTOR, ELECTRONIC CRYSTAL UNIT; EXTRACTOR, ELECTRON TUBE.
What is an Impact Type Bit Set And Handle Screwdriver? 14 Items: An Impact Type Bit Set And Handle Screwdriver (SCREWDRIVER,BIT SET AND HANDLE,IMPACT TYPE) is an item consisting of a set of screwdriver bits and a impact driver to accommodate the bits of various types and characteristics. It is designed to transmit a strong rotating movement by the impact of a hammer blowed on the impact driver. It is used to loosen rusted or seized screws. Excludes SCREWDRIVER, BIT SET AND HANDLE.
What is a Hand Vise Jaw? 19 Items: A Hand Vise Jaw (JAW,VISE,HAND) is an item consisting of two opposing parts of a VISE, HAND. The item is moveable and able to open and close. It can hold, grasp or clamp work.
What is a Screwdriver Handle? 28 Items: A Screwdriver Handle (HANDLE,SCREWDRIVER) is an item used to accommodate various types of BIT, SCREWDRIVER. It is designed to rotate a bit that is used for installing or removing screws.
What is a Wire Twister Pliers? 25 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 284 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is a Mechanical Puller Body? 45 Items: A Mechanical Puller Body (BODY,PULLER,MECHANICAL) is an item designed to support and enclose the internal parts of a PULLER,MECHANICAL.
What is a Flat Tip And Cross Tip Screwdriver Set? 39 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is a Socket Wrench Screwdriver Attachment Set? 22 Items: A Socket Wrench Screwdriver Attachment Set (SCREWDRIVER ATTACHMENT SET,SOCKET WRENCH) is a set of screwdriver attachment, socket wrench of different sizes. Items consist of a female square drive on one end to attach to a handle, socket wrench and various screwdriver tip configurations on the opposite end. Excludes SCREWDRIVER ATTACHMENT,SOCKET WRENCH
What is an Oil Filter Wrench? 44 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 430 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Communications Equipment Spring Adjuster? 13 Items: A Communications Equipment Spring Adjuster (ADJUSTER,SPRING,COMMUNICATIONS EQUIPMENT) is a single or double end tool, equipped with slot(s) of various dimensions or with cylindrical rod(s), used for adjusting the springs or spring tensioned parts of electronic equipment.
What is a Rotating Members Aligning Tool? 32 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
What is a Final Drive Assembly Alignment Pin? 41 Items: A Final Drive Assembly Alignment Pin (ALIGNMENT PIN,FINAL DRIVE ASSEMBLY) is a special designed pin used in the assembling of the final drive.
Arm,Handling Tool 77 Items
What is a Splicing Sleeve Compressing Tool? 23 Items: A Splicing Sleeve Compressing Tool (COMPRESSING TOOL,SPLICING SLEEVE) is a hand tool having hinged leverage handles similar to a CUTTER, BOLT or pliers, designed to compress a splicing sleeve when joining the ends of two conductors, or when forming an eye splice in the end of a wire rope. Excludes CRIMPING TOOL, TERMINAL, HAND.
What is a Hand Screw Jack Extension? 14 Items: A Hand Screw Jack Extension (EXTENSION,HAND SCREW JACK) is a length of externally threaded rigid shafting which is the adjustable section of a JACK, SCREW, HAND.
What is a Mechanical Puller Gear Adapter? 21 Items: A Mechanical Puller Gear Adapter (GEAR ADAPTER,PULLER,MECHANICAL) is an adapter that adapts a PULLER,MECHANICAL, to pull a certain gear.
Handle,Hydraulic Jack 18 Items
What is a Female Electrical Contact Resizing Tool? 11 Items: A Female Electrical Contact Resizing Tool (RESIZING TOOL,FEMALE ELECTRICAL CONTACT) is a tool designed to shape to a specific size, female contacts such as those used on electrical connectors, tube sockets, crystal sockets, and pin jacks.
What is a Screwdriver And Socket Wrench Combination? 13 Items: A Screwdriver And Socket Wrench Combination is a hand-tool formed into an integral unit with a socket wrench at one end and a screwdriver bit at the other end. See also SCREWDRIVER AND WRENCH ASSEMBLY.
What is a Hand Hose Fitting Swaging Tool Kit? 11 Items: A Hand Hose Fitting Swaging Tool Kit (SWAGING TOOL KIT,HOSE FITTING,HAND) is a device, hydraulically actuated by hand or power operated pump, consisting of face plate, adapter plate, finger cages, fingers, ram, bushing, and expanding mandrels combined on a single base in various functional arrangements. It is used for swaging the outside diameter of hose assembly fittings, expanding the inside diameter of hose assemblies, and securing the fabrication of hose assemblies. Included are a hand or power operated pump, lubricant, cases, and trays.
What is a Catch Lever Tool? 12 Items: A Catch Lever Tool (LEVER TOOL,CATCH) is a specially designed hand tool which engages the opening and closing lever of a CATCH (as modified) for ease of operation. It is constructed of thin rigid material, usually flat, and one end has an engaging tongue.
What is a Manual Impact Wrench? 11 Items: A Manual Impact Wrench (WRENCH,IMPACT,MANUAL) is a manually operated handheld tool consisting of spring-loaded handle and a power-impact head which delivers a torsional impact from either continuous movement of the handle in one direction, or by a reciprocating action. It is used in tightening and loosening fasteners, such as bolts, nuts, and the like. The item may include sockets, extensions and offset fittings, nut runners, and the like.
What is a Drift? 63 Items: A Drift is an item consisting of a tubular body fitted with replaceable tips. It is designed to insert or remove mechanical components where space is restricted.
What is a Nutdriver? 46 Items: A Nutdriver is a non-powered hand tool with a screwdriver style handle, shaft and formed female hex or square socket at driving end.
What is a Locking Device Removal Tool? 12 Items: A Locking Device Removal Tool (REMOVAL TOOL,LOCKING DEVICE) is a hand tool designed to facilitate the removal of a WASHER, KEY and a LOCKING PLATE, NUT AND BOLT.
What is a Hydraulic Fitting Crimping Tool Head? 26 Items: A Hydraulic Fitting Crimping Tool Head (HEAD,CRIMPING TOOL,HYDRAULIC FITTING) is a component of a crimping tool used to compress fittings on fluid tubes. It consists of a U-shape item, in which, are mounted different sizes of DIE, CRIMPING TOOL for tubes of various diameters.
What is a Torque Screwdriver? 11 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.
What is a Special Purpose Combination Wrench? 13 Items: A Special Purpose Combination Wrench (WRENCH,COMBINATION,SPECIAL PURPOSE) is a tool having a combination of ends and facets. The ends may have open end, box or spanner characteristics. The sides may have features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s). Designed to fit specific items, not sized as standard or metric.
What is a Screwdriver Bit Holder? 56 Items: A Screwdriver Bit Holder (HOLDER,SCREWDRIVER BIT) is an attachment with a socket end for accepting male hexagon shank insert bits and a drive end for adapting to a portable power or hand tool.
What is a Telescoping Pole? 16 Items: A Telescoping Pole (POLE,TELESCOPING) is an item which is designed to be extended or compressed by the sliding of overlapping sections. This item may or may not be able to accommodate an extension.

Stock Items From Supply Class 5120 Page 24 of 110

5120-14-421-6302
Open End Box Wrench

144216302
210101: RNCC: 3 | RNVC: 2

20 Jan 1988

5120-14-352-4402
Mechanical Puller

143524402
9970-111-207: RNCC: 3 | RNVC: 2
9970-111-207-0: RNCC: 5 | RNVC: 2
85-689-7122: RNCC: 6 | RNVC: 9

16 Oct 1978

5120-14-552-7401
Socket Wrench Set

145527401
99C.P8E: RNCC: 3 | RNVC: 2
99C.P8E: RNCC: 5 | RNVC: 2
3148517008168: RNCC: 5 | RNVC: 2

26 Jan 2007

5120-14-534-3505
Lamp Cap Extractor

145343505
5.05800.042: RNCC: 3 | RNVC: 2

19 Mar 2003

5120-14-466-7617
Hand Vise

144667617
A17Z0 BB000: RNCC: 3 | RNVC: 2
89298447: RNCC: 5 | RNVC: 2

24 Nov 1993

5120-14-277-3500
Socket Wrench

142773500
8810007141: RNCC: 3 | RNVC: 2
8810232001: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-290-7528
Machinist's Scriber

142907528
235.1: RNCC: 3 | RNVC: 2
235-1: RNCC: 5 | RNVC: 2
3148511547502: RNCC: 5 | RNVC: 2
0154750: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-254-4905
Socket Wrench

142544905
701307: RNCC: 3 | RNVC: 9
3696BIS: RNCC: 5 | RNVC: 2
54211: RNCC: 5 | RNVC: 9

1 Jan 1969

5120-14-471-7053
Box Wrench Set

144717053
55.JU8T: RNCC: 3 | RNVC: 2
3148515308208: RNCC: 5 | RNVC: 2
0530820: RNCC: 5 | RNVC: 9

13 Sep 1994

5120-14-410-5895
Socket Wrench

144105895
882691M1: RNCC: 3 | RNVC: 2
882691M1: RNCC: 5 | RNVC: 9

9 Jul 1986

5120-14-432-0722
Brake Repair Pliers

144320722
T.243: RNCC: 3 | RNVC: 2
3148510648705: RNCC: 5 | RNVC: 2
0064870: RNCC: 5 | RNVC: 9

22 May 1989

5120-14-272-8349
Socket Wrench

142728349
0000330576: RNCC: 3 | RNVC: 2
330576: RNCC: 5 | RNVC: 9
0000330576: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-400-6422
Hand Hammer

144006422
204-32ENX: RNCC: 3 | RNVC: 2

8 May 1985

5120-14-518-2845
Hand Hammer

145182845
0003500201: RNCC: 3 | RNVC: 2

2 Feb 2000

5120-14-257-1781
Socket Wrench

142571781
6710-05: RNCC: 3 | RNVC: 2

1 Jan 1969

5120-14-388-5439
Mechanical Puller

143885439
NO PRIMARY REF14-388-5439: RNCC: 3 | RNVC: 2
805-2214629: RNCC: 5 | RNVC: 2
805-2214629: RNCC: 5 | RNVC: 9

3 Nov 1983

5120-14-425-9447
Aligning Punch

144259447
TH20C2-1-5A2: RNCC: 3 | RNVC: 2

28 Jul 1988

5120-14-448-2620
Socket Wrench Set

144482620
NO PRIMARY REF14-448-2620: RNCC: 3 | RNVC: 2
76.P16M: RNCC: 5 | RNVC: 2
76P16M: RNCC: 5 | RNVC: 2
91712158: RNCC: 5 | RNVC: 2
0532460: RNCC: 5 | RNVC: 2
76 P16M: RNCC: 5 | RNVC: 2

18 Jun 1991

5120-14-294-6521
Socket Wrench

142946521
412728-31: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-210-8469
Socket Wrench

142108469
NO PRIMARY REF14-210-8469: RNCC: 3 | RNVC: 2
Z13663: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-303-6313
Box Wrench

143036313
0D2-27: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-376-9145
Pipe Wrench

143769145
1-1038-02-125: RNCC: 3 | RNVC: 9
85-691-9007: RNCC: 6 | RNVC: 9

28 Apr 1982

5120-14-539-1821
Mechanical Puller

145391821
S661V3601101: RNCC: 3 | RNVC: 2

9 Dec 2003

5120-14-437-9404
Timber Bar

144379404
100835: RNCC: 3 | RNVC: 2
C41087: RNCC: 5 | RNVC: 2

28 Feb 1990

5120-14-378-2903
Hand Hammer

143782903
796-35: RNCC: 3 | RNVC: 2
79635: RNCC: 5 | RNVC: 9

20 Jul 1982

5120-14-400-6415
Hand Hammer

144006415
208-36ENX: RNCC: 3 | RNVC: 2

8 May 1985

5120-14-442-3596
Box Wrench

144423596
68B.10X11: RNCC: 3 | RNVC: 2
3148511162361: RNCC: 5 | RNVC: 2
162-2897: RNCC: 5 | RNVC: 2
0714 23 25: RNCC: 5 | RNVC: 2
0116236: RNCC: 5 | RNVC: 9
FACOM68B.10X11: RNCC: 5 | RNVC: 9

15 Oct 1990

5120-14-466-3782
Mechanical Puller

144663782
U21811: RNCC: 3 | RNVC: 2

3 Nov 1993

5120-14-351-2537
Socket Wrench

143512537
002859041P: RNCC: 3 | RNVC: 2

10 Aug 1978

5120-14-316-5609
Mechanical Puller

143165609
3210-95-32-315: RNCC: 3 | RNVC: 2
08-412: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-291-8189
Box Wrench

142918189
105N36X41: RNCC: 3 | RNVC: 2
55.36X41: RNCC: 3 | RNVC: 2
111-36X41: RNCC: 3 | RNVC: 9
3148511115206: RNCC: 5 | RNVC: 2
55-36X41: RNCC: 5 | RNVC: 2
65-36X41: RNCC: 5 | RNVC: 2
190198: RNCC: 5 | RNVC: 2
0111520: RNCC: 5 | RNVC: 9
DEM111-36X41: RNCC: 5 | RNVC: 9
F300 0T 002 6724: RNCC: 6 | RNVC: 9

1 Jan 1972

5120-14-324-4715
Drive Pin Punch

143244715
330A93-2010-20: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-458-6709
Socket Wrench

144586709
NO PRIMARY REF14-458-6709: RNCC: 3 | RNVC: 2
3148511195086: RNCC: 5 | RNVC: 2
0613 185 8: RNCC: 5 | RNVC: 2
H24132: RNCC: 5 | RNVC: 2
74.8VSE: RNCC: 5 | RNVC: 2
74.8VSE: RNCC: 5 | RNVC: 9
0119508: RNCC: 5 | RNVC: 9

29 Oct 1992

5120-14-421-7323
Mechanical Puller

144217323
8816560000: RNCC: 3 | RNVC: 2

27 Jan 1988

5120-14-281-7598
Mechanical Puller

142817598
A127905: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-390-6071
Hand Tube Bender

143906071
102-F-08: RNCC: 3 | RNVC: 2

26 Jan 1984

5120-14-527-8122
Mechanical Puller

145278122
888-492-300-1: RNCC: 3 | RNVC: 2

21 Nov 2001

5120-14-378-5599
Mechanical Puller

143785599
360A93-3214-00: RNCC: 3 | RNVC: 2

11 Aug 1982

5120-14-364-9202
Driftpin

143649202
321A96-0004-00: RNCC: 3 | RNVC: 2
85-691-1867: RNCC: 6 | RNVC: 9

2 Sep 1980

5120-14-395-8784
Hand Hammer

143958784
430-21ENX: RNCC: 3 | RNVC: 2

30 Oct 1984

5120-14-364-2526
Mechanical Puller

143642526
2349-02066: RNCC: 3 | RNVC: 2

7 Aug 1980

5120-14-391-8620
Driftpin

143918620
STM03232: RNCC: 3 | RNVC: 2
STM032-32: RNCC: 5 | RNVC: 2

21 Mar 1984

5120-14-347-2981
Mechanical Puller

143472981
E578E1-76: RNCC: 3 | RNVC: 2

19 Jan 1978

5120-14-356-4936
Mechanical Puller

143564936
NO PRIMARY REF14-356-4936: RNCC: 3 | RNVC: 2
345-101: RNCC: 5 | RNVC: 9

15 May 1979

5120-14-209-8277
Mechanical Puller

142098277
NO PRIMARY REF14-209-8277: RNCC: 3 | RNVC: 2
34435RK00: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-329-6309
Box Wrench

143296309
M31-011: RNCC: 3 | RNVC: 2
M31-011: RNCC: 5 | RNVC: 9

2 Jul 1975

5120-14-291-1050
Lamp Extractor

142911050
S258: RNCC: 3 | RNVC: 2
S258: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-403-3458
Hand Hydraulic Jack

144033458
1624000: RNCC: 3 | RNVC: 2
5000502210: RNCC: 5 | RNVC: 2
FOE1624000: RNCC: 5 | RNVC: 9

21 Aug 1985

5120-14-366-8481
Driftpin

143668481
30AM023: RNCC: 3 | RNVC: 2
30AM23: RNCC: 5 | RNVC: 2

20 Nov 1980

5120-14-455-5936
Stud Remover

144555936
287B.12: RNCC: 3 | RNVC: 2
0165720: RNCC: 5 | RNVC: 2
287A.12: RNCC: 5 | RNVC: 2
91638918: RNCC: 5 | RNVC: 2
287A12: RNCC: 5 | RNVC: 2
3148511657218: RNCC: 5 | RNVC: 2

28 May 1992

5120-14-311-7487
Socket Wrench

143117487
6800-1025: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-344-2653
Ratchet Screwdriver

143442653
481314: RNCC: 3 | RNVC: 2

10 Aug 1977

5120-14-375-1781
Mechanical Puller

143751781
16380271: RNCC: 3 | RNVC: 2
16380271: RNCC: 5 | RNVC: 9

26 Feb 1982

5120-14-413-3188
Box Wrench

144133188
50.96: RNCC: 3 | RNVC: 2
3148511072202: RNCC: 5 | RNVC: 2
50-96: RNCC: 5 | RNVC: 2
0107220: RNCC: 5 | RNVC: 9

26 Nov 1986

5120-14-220-7473
Socket Wrench

142207473
80-7: RNCC: 3 | RNVC: 2
3107107: RNCC: 3 | RNVC: 2
162-7: RNCC: 3 | RNVC: 9
DEM162-7: RNCC: 5 | RNVC: 9
VIR3107107: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-298-1474
Hammer Handle

142981474
B54521C33U900: RNCC: 2 | RNVC: 2
000330005M: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-488-9486
Mechanical Puller

144889486
38138: RNCC: 3 | RNVC: 2

13 Jun 1997

5120-14-400-1927
Mechanical Puller

144001927
332A93-3110-00: RNCC: 3 | RNVC: 2

24 Apr 1985

5120-14-371-9745
Driftpin

143719745
8813329000: RNCC: 3 | RNVC: 2

5 Aug 1981

5120-14-399-1830
Mechanical Puller

143991830
8814946000: RNCC: 3 | RNVC: 2

6 Mar 1985

5120-14-288-4136
Mechanical Puller

142884136
8810138000: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-488-9488
Mechanical Puller

144889488
38038: RNCC: 3 | RNVC: 2

13 Jun 1997

5120-14-542-9616
Mechanical Puller

145429616
837053: RNCC: 3 | RNVC: 2

14 Aug 2004

5120-14-550-1921
Mechanical Puller

145501921
365A93-3101-02: RNCC: 3 | RNVC: 2

7 Jun 2006

5120-14-419-2590
Hand Rivet Set

144192590
530597: RNCC: 3 | RNVC: 2

16 Oct 1987

5120-14-323-2057
Box Wrench

143232057
101-1X1 1-8: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-394-3304
Socket Wrench

143943304
8811440002: RNCC: 3 | RNVC: 2

28 Aug 1984

5120-14-323-2064
Open End Box Wrench

143232064
103-1 1-8X1 1-4: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-555-3599
Ratchet Wrench

145553599
64.8X9: RNCC: 3 | RNVC: 2
742522: RNCC: 3 | RNVC: 2
3148517425224: RNCC: 5 | RNVC: 2

30 Oct 2007

5120-14-507-6119
Ratchet Wrench

145076119
J.161: RNCC: 3 | RNVC: 2
J.161: RNCC: 5 | RNVC: 2
J.161: RNCC: 5 | RNVC: 2
J.161: RNCC: 5 | RNVC: 9

29 Jul 1998

5120-14-544-5166
Woven Cable Grip

145445166
AA003050: RNCC: 3 | RNVC: 2
MTA4004: RNCC: 5 | RNVC: 2

8 Feb 2005

5120-14-512-6186
Wood Mallet

145126186
2455: RNCC: 3 | RNVC: 9

17 Feb 1999

5120-14-393-0347
Machinist's Vise

143930347
61115: RNCC: 3 | RNVC: 2
SAM61115: RNCC: 5 | RNVC: 9

12 Apr 1984

5120-14-533-4156
Hand Hydraulic Jack

145334156
A93-015949: RNCC: 3 | RNVC: 2
1080-3A: RNCC: 3 | RNVC: 2
308M108: RNCC: 5 | RNVC: 9

5 Feb 2003

5120-14-433-6257
Bench And Pipe Vise

144336257
1222.150S: RNCC: 3 | RNVC: 2
1222-150S: RNCC: 5 | RNVC: 2
3148512257394: RNCC: 5 | RNVC: 2
0225739: RNCC: 5 | RNVC: 9

2 Aug 1989

5120-14-365-8676
Socket Wrench

143658676
76.34: RNCC: 3 | RNVC: 2
3148511210604: RNCC: 5 | RNVC: 2
76-34: RNCC: 5 | RNVC: 2
0121060: RNCC: 5 | RNVC: 9

8 Oct 1980

5120-14-525-5052
Mechanical Puller

145255052
1571: RNCC: 3 | RNVC: 2

6 Jun 2001

5120-14-369-6960
Box Wrench

143696960
BB374: RNCC: 3 | RNVC: 9

17 Apr 1981

5120-14-215-1350
Mechanical Puller

142151350
3130S95-12-027: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-304-1785
Blacksmiths' Tongs

143041785
3812: RNCC: 3 | RNVC: 9

1 Jan 1974

5120-14-375-8043
Pipe Wrench

143758043
300A98809: RNCC: 3 | RNVC: 2
91371751: RNCC: 5 | RNVC: 2
300A98809: RNCC: 5 | RNVC: 2
300A98809: RNCC: 5 | RNVC: 9
300A98809: RNCC: 5 | RNVC: 9

30 Mar 1982

5120-14-436-4775
Mechanical Puller

144364775
6802K33-2121-01: RNCC: 3 | RNVC: 2

3 Jan 1990

5120-14-401-6300
Seal Inserter

144016300
8814106000: RNCC: 3 | RNVC: 2

13 Jun 1985

5120-14-552-0349
Box Wrench

145520349
68B.12X13H: RNCC: 3 | RNVC: 2
00.28.37.24: RNCC: 5 | RNVC: 2
3148511162392: RNCC: 5 | RNVC: 2

21 Nov 2006

5120-14-258-5037
Stake Puller Kit

142585037
10280: RNCC: 3 | RNVC: 2
SK-97A: RNCC: 6 | RNVC: 9

1 Jan 1969

5120-14-511-5896
Plier Wrench

145115896
513A.7: RNCC: 3 | RNVC: 2
181731: RNCC: 5 | RNVC: 2
3148511817315: RNCC: 5 | RNVC: 2
176-0668: RNCC: 5 | RNVC: 2
0714 09 07: RNCC: 5 | RNVC: 2

6 Jan 1999

5120-14-424-3469
Hand Hammer

144243469
200A.24: RNCC: 3 | RNVC: 2
200A24: RNCC: 5 | RNVC: 2
3148511462003: RNCC: 5 | RNVC: 2
0242627W00: RNCC: 5 | RNVC: 2
91638768: RNCC: 5 | RNVC: 2
2695 502 020: RNCC: 5 | RNVC: 2
0146200: RNCC: 5 | RNVC: 9

19 May 1988

5120-14-386-1613
Hand Beading Tool

143861613
6801P34-1033-00: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-250-6459
Open End Box Wrench

142506459
552-000MA316DET23: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-437-2565
Seal Inserter

144372565
IND75108: RNCC: 3 | RNVC: 2

24 Jan 1990

5120-14-282-0525
Mechanical Puller

142820525
6510A5MN100: RNCC: 2 | RNVC: 2

1 Jan 1971

5120-14-313-7296
Mechanical Puller

143137296
C47680: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-552-4488
Mechanical Puller

145524488
M20820: RNCC: 3 | RNVC: 2

3 Jan 2007

5120-14-298-4569
Hand Hammer

142984569
864-60: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-530-8547
Nutdriver

145308547
119030: RNCC: 3 | RNVC: 2
3148511190302: RNCC: 5 | RNVC: 2
74.9/32: RNCC: 5 | RNVC: 2

9 Jul 2002

5120-14-293-7567
Hand Beading Tool

142937567
7062BA1MANDRINT2-25: RNCC: 2 | RNVC: 2

1 Jan 1973

5120-14-435-1926
Box Wrench

144351926
57.10X12: RNCC: 3 | RNVC: 2
3148511132005: RNCC: 5 | RNVC: 2
0113200: RNCC: 5 | RNVC: 9

25 Oct 1989

5120-14-539-2197
Hand Hammer

145392197
50108069: RNCC: 3 | RNVC: 2

12 Dec 2003

5120-14-326-8883
Socket Wrench Set

143268883
0533540: RNCC: 3 | RNVC: 2
99 A P 12 E: RNCC: 5 | RNVC: 2
99AP12E: RNCC: 5 | RNVC: 2
99P13E: RNCC: 5 | RNVC: 2

2 Jul 1975

5120-14-452-0719
Ratchet Wrench

144520719
TO10311: RNCC: 3 | RNVC: 9

18 Dec 1991

5120-14-470-7876
Drive Pin Punch

144707876
75933: RNCC: 3 | RNVC: 2
89280660: RNCC: 5 | RNVC: 2
89280478: RNCC: 5 | RNVC: 2

6 Jul 1994

5120-14-398-6818
Mechanical Puller

143986818
16019680W: RNCC: 3 | RNVC: 2

31 Jan 1985

5120-14-526-2010
Mechanical Puller

145262010
888-350-000-2: RNCC: 3 | RNVC: 2

10 Jul 2001

5120-14-437-4323
Mechanical Puller

144374323
16849725: RNCC: 3 | RNVC: 2
16849725: RNCC: 5 | RNVC: 9

31 Jan 1990

5120-14-510-9841
Hand Hammer

145109841
2012803: RNCC: 3 | RNVC: 2

25 Nov 1998

5120-14-425-9488
Hand Screw Jack

144259488
4671: RNCC: 3 | RNVC: 2

28 Jul 1988

5120-14-437-4324
Mechanical Puller

144374324
16849728: RNCC: 3 | RNVC: 2
16849728: RNCC: 5 | RNVC: 9

31 Jan 1990

5120-14-539-3988
Socket Wrench Set

145393988
66.JE9: RNCC: 3 | RNVC: 2
3148515315251: RNCC: 5 | RNVC: 2

14 Jan 2004

5120-14-272-4041
Box Wrench

142724041
100-32X35: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-421-2058
Pipe Wrench

144212058
120-1-1/2: RNCC: 3 | RNVC: 2
634.16: RNCC: 3 | RNVC: 2
3148511345405: RNCC: 5 | RNVC: 2
3272670241954: RNCC: 5 | RNVC: 2
634-1-1/2: RNCC: 5 | RNVC: 9

6 Jan 1988

5120-14-387-9812
Open End Box Wrench

143879812
853-100-054-0: RNCC: 3 | RNVC: 2

12 Oct 1983

5120-14-525-1664
Spatula

145251664
01-236-433: RNCC: 3 | RNVC: 2

23 May 2001

5120-14-281-7617
Mechanical Puller

142817617
A122472: RNCC: 3 | RNVC: 2
100078: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-400-3589
Driftpin

144003589
353980: RNCC: 3 | RNVC: 2
353980: RNCC: 5 | RNVC: 9

24 Apr 1985

5120-14-549-7847
Seal Inserter

145497847
853-290-180-0: RNCC: 3 | RNVC: 2

11 May 2006

5120-14-206-8261
Wood Mallet

142068261
NO PRIMARY REF14-206-8261: RNCC: 3 | RNVC: 2
ST4SMG0RT5-311: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-343-7855
Box Wrench

143437855
M31-122: RNCC: 3 | RNVC: 2
M31122: RNCC: 5 | RNVC: 2
M31-122: RNCC: 5 | RNVC: 9

13 Jul 1977

5120-14-548-3895
Drive Pin Punch

145483895
8420L-3.5CVN: RNCC: 3 | RNVC: 2
00.08.13.37: RNCC: 5 | RNVC: 2

12 Jan 2006

5120-14-228-7764
C Clamp

142287764
0162700: RNCC: 3 | RNVC: 2
143-150: RNCC: 3 | RNVC: 2
449-150: RNCC: 3 | RNVC: 2
3458150: RNCC: 3 | RNVC: 2
4231-150: RNCC: 3 | RNVC: 9
271-150: RNCC: 5 | RNVC: 2
56M135: RNCC: 5 | RNVC: 2
3272670235076: RNCC: 5 | RNVC: 2
271.150: RNCC: 5 | RNVC: 2
2100: RNCC: 5 | RNVC: 2

1 Jan 1966

5120-14-274-7890
Hand Hammer Head

142747890
13-54-50X50: RNCC: 2 | RNVC: 2
3896-50: RNCC: 3 | RNVC: 9

1 Jan 1971

5120-14-457-7321
Socket Wrench

144577321
0372-42-10087: RNCC: 3 | RNVC: 2

17 Sep 1992

5120-14-447-5609
Aligning Punch

144475609
853-940-056-0: RNCC: 3 | RNVC: 2

29 May 1991

5120-14-395-0272
Mechanical Puller

143950272
853-200-481-0: RNCC: 3 | RNVC: 2

2 Oct 1984

5120-14-522-7200
Seal Inserter

145227200
IND80142: RNCC: 3 | RNVC: 2

15 Nov 2000

5120-14-459-6142
Mechanical Puller

144596142
45056152: RNCC: 3 | RNVC: 2
45056152: RNCC: 5 | RNVC: 9

10 Dec 1992

5120-14-540-8506
Putty Knife

145408506
6225140001: RNCC: 3 | RNVC: 2
3303806225057: RNCC: 5 | RNVC: 2

23 Apr 2004

5120-14-340-7598
Hand Hammer Head

143407598
204-32: RNCC: 3 | RNVC: 2

14 Feb 1977

5120-14-370-0486
Hand Posthole Auger

143700486
131243: RNCC: 3 | RNVC: 2

18 May 1981

5120-14-367-6231
Mechanical Puller

143676231
129PAA: RNCC: 3 | RNVC: 2

19 Jan 1981

5120-14-413-4854
Float

144134854
NO PRIMARY REF14-413-4854: RNCC: 3 | RNVC: 2
2695 971 030: RNCC: 5 | RNVC: 2
5100 TB 1: RNCC: 5 | RNVC: 9

17 Dec 1986

5120-14-510-9840
Hand Hammer

145109840
2132203: RNCC: 3 | RNVC: 2

25 Nov 1998

5120-14-545-6307
Hand Hammer

145456307
MISEN0EUVRE: RNCC: 3 | RNVC: 2

26 Apr 2005

5120-14-347-7944
Jaw Cable Grip

143477944
SBDS16-18-12SILIC0NE: RNCC: 3 | RNVC: 2
EC66E16-13: RNCC: 3 | RNVC: 9

1 Mar 1978

5120-14-401-5191
Drill Drift

144015191
NO PRIMARY REF14-401-5191: RNCC: 3 | RNVC: 2
219: RNCC: 5 | RNVC: 2
3148511496008: RNCC: 5 | RNVC: 2

13 Jun 1985

5120-14-529-0384
Hand Vise

145290384
38206 9083: RNCC: 3 | RNVC: 2
38206 9083: RNCC: 5 | RNVC: 9

6 Mar 2002

5120-14-385-3482
Mechanical Puller

143853482
6807J33-4008-00: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-283-3892
Open End Box Wrench

142833892
9970-115-301: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-451-9730
Mechanical Puller

144519730
U.310-250: RNCC: 3 | RNVC: 2
3148510752082: RNCC: 5 | RNVC: 2
U310-250: RNCC: 5 | RNVC: 2
U310.250: RNCC: 5 | RNVC: 2
91632625: RNCC: 5 | RNVC: 2
0075208: RNCC: 5 | RNVC: 9

16 Dec 1991

5120-14-531-8008
Mechanical Puller

145318008
GISA02: RNCC: 3 | RNVC: 2

18 Sep 2002

5120-14-417-7377
Driftpin

144177377
MJN236000021: RNCC: 3 | RNVC: 2
MJN236000021: RNCC: 5 | RNVC: 2

22 Jul 1987

5120-14-461-6878
Socket Wrench

144616878
74.T12: RNCC: 3 | RNVC: 2

22 Mar 1993

5120-14-427-0754
Socket Wrench Set

144270754
92.P16M: RNCC: 3 | RNVC: 2
3148515332401: RNCC: 5 | RNVC: 2
92P16M: RNCC: 5 | RNVC: 2
0240801S00: RNCC: 5 | RNVC: 2
0533240: RNCC: 5 | RNVC: 9

6 Oct 1988

5120-14-288-2015
Socket Wrench

142882015
J021: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-528-8413
Hand Hammer

145288413
OUTILLAGE EFI 10: RNCC: 3 | RNVC: 2

20 Feb 2002

5120-14-252-2655
Box Wrench

142522655
552BL1DET11: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-358-5634
Inspection Mirror

143585634
834: RNCC: 3 | RNVC: 2
834: RNCC: 5 | RNVC: 2
130274: RNCC: 5 | RNVC: 2
91463576: RNCC: 5 | RNVC: 2
0206820: RNCC: 5 | RNVC: 9
206820834: RNCC: 5 | RNVC: 9

7 Sep 1979

5120-14-472-3910
Hand Hammer

144723910
859A.28: RNCC: 3 | RNVC: 2
3148512090106: RNCC: 5 | RNVC: 2
859A28: RNCC: 5 | RNVC: 2
2695 470 3: RNCC: 5 | RNVC: 2
0209010: RNCC: 5 | RNVC: 9

19 Oct 1994

5120-14-357-4321
Socket Wrench

143574321
7237CLEDE8MM: RNCC: 3 | RNVC: 2
XCELITE99-8MM: RNCC: 5 | RNVC: 9

7 Jun 1979

5120-14-370-9002
Hand Beading Tool

143709002
6801R35-0110-00: RNCC: 3 | RNVC: 2
6801366A35-0110-00: RNCC: 5 | RNVC: 2

21 Feb 1996

5120-14-518-0871
Seal Inserter

145180871
8019810F00: RNCC: 3 | RNVC: 2

26 Jan 2000

5120-14-432-7201
Seal Inserter

144327201
OUT50136: RNCC: 3 | RNVC: 2
0UT50136: RNCC: 5 | RNVC: 2

21 Jun 1989

5120-14-530-6385
Seal Inserter

145306385
D47691R5: RNCC: 3 | RNVC: 2

1 Jul 2002

5120-14-277-3504
Socket Wrench

142773504
8810007142: RNCC: 3 | RNVC: 2
8810153004: RNCC: 5 | RNVC: 2
8810424005: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-471-7065
Open End Box Wrench

144717065
70A.1': RNCC: 3 | RNVC: 2
70A.1: RNCC: 5 | RNVC: 2
70A.1": RNCC: 5 | RNVC: 2
3148511167236: RNCC: 5 | RNVC: 2
0116723: RNCC: 5 | RNVC: 9

13 Sep 1994

5120-14-386-1599
Seal Inserter

143861599
6801P32-5428-20: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-363-8779
Socket Wrench

143638779
526048000: RNCC: 3 | RNVC: 2

7 Aug 1980

5120-14-252-7129
Box Wrench

142527129
55.19X22: RNCC: 3 | RNVC: 2
111-19X22: RNCC: 3 | RNVC: 9
3148511111208: RNCC: 5 | RNVC: 2
55-19X22: RNCC: 5 | RNVC: 2
105-19X22: RNCC: 5 | RNVC: 2
3272670230941: RNCC: 5 | RNVC: 2
0111120: RNCC: 5 | RNVC: 9
105N19X22: RNCC: 5 | RNVC: 9
DEM111-19X22: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-316-5883
Socket Wrench

143165883
589007: RNCC: 3 | RNVC: 9

1 Jan 1975

5120-14-528-3045
Mechanical Puller

145283045
45713422: RNCC: 3 | RNVC: 9

16 Jan 2002

5120-14-440-5418
Mechanical Puller

144405418
0-30878-2: RNCC: 3 | RNVC: 2
85-694-0294: RNCC: 6 | RNVC: 9

17 Jul 1990

5120-14-539-2640
Mechanical Puller

145392640
T632G3013101: RNCC: 3 | RNVC: 2

17 Dec 2003

5120-14-516-8000
Mechanical Puller

145168000
5000260811: RNCC: 3 | RNVC: 2

18 Oct 1999

5120-14-545-1616
Tacker

145451616
318M5: RNCC: 3 | RNVC: 2

22 Mar 2005

5120-14-438-4429
Mechanical Puller

144384429
39215606: RNCC: 3 | RNVC: 2

21 Mar 1990

5120-14-476-9479
Drill Guide

144769479
48400CRB13A1-13A2: RNCC: 3 | RNVC: 2
48400CRB13A1-A2: RNCC: 5 | RNVC: 2
5120AA2075437: RNCC: 6 | RNVC: 9

12 Jul 1995

5120-14-309-7460
Driftpin

143097460
341A98-2030-20: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-319-9962
Socket Wrench

143199962
0D2L19: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-227-9423
Socket Wrench

142279423
12506679: RNCC: 3 | RNVC: 2
12506679: RNCC: 3 | RNVC: 9

1 Jan 1966

5120-14-249-9494
Socket Wrench

142499494
1115: RNCC: 3 | RNVC: 2
720708: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-481-7530
Socket Wrench

144817530
1117884A00: RNCC: 3 | RNVC: 2

30 May 1996

5120-14-204-9390
C Clamp

142049390
23MLE3500X120: RNCC: 3 | RNVC: 2

1 Jan 1963

5120-14-526-6430
Lining Bar

145266430
399750: RNCC: 3 | RNVC: 2

8 Aug 2001

5120-14-458-8849
Socket Wrench

144588849
M35077: RNCC: 3 | RNVC: 2

5 Nov 1992

5120-14-537-2493
Box Wrench Set

145372493
55.JU6AT: RNCC: 3 | RNVC: 2
3148515307669: RNCC: 5 | RNVC: 2

15 Oct 2003

5120-14-295-1787
Drive Pin Punch

142951787
000644005P: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-536-3653
Seal Inserter

145363653
61380657AA: RNCC: 3 | RNVC: 2

29 Jul 2003

5120-14-317-0471
Mechanical Puller

143170471
RT5814: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-417-1030
Mechanical Puller

144171030
537483: RNCC: 3 | RNVC: 2

1 Jul 1987

5120-14-548-0545
Mechanical Puller

145480545
MW1142F00: RNCC: 3 | RNVC: 2

7 Dec 2005

5120-14-040-7916
Pin Inserter

140407916
000334005P: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-274-3778
Ratchet Wrench

142743778
MT001100: RNCC: 3 | RNVC: 2
60867-9: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-430-1023
Hand Hammer

144301023
0225910: RNCC: 3 | RNVC: 2
1261: RNCC: 5 | RNVC: 2

1 Mar 1989

5120-14-529-2689
Pipe Wrench

145292689
121.1': RNCC: 3 | RNVC: 2
3148511345702: RNCC: 5 | RNVC: 2

20 Mar 2002

5120-14-261-7670
Lamp Extractor

142617670
536-414-041: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-480-4012
Drain Plug Wrench

144804012
230307: RNCC: 3 | RNVC: 2

7 Mar 1996

5120-14-493-7005
Box Wrench

144937005
T60UT0011000: RNCC: 3 | RNVC: 2

13 Oct 1997

5120-14-449-0134
Box Wrench

144490134
76055: RNCC: 3 | RNVC: 2
89280496: RNCC: 5 | RNVC: 2

24 Jul 1991

5120-14-529-2064
Mechanical Puller

145292064
10614645: RNCC: 3 | RNVC: 2

18 Mar 2002

5120-14-382-9515
Socket Wrench

143829515
4016: RNCC: 3 | RNVC: 2
SV4016: RNCC: 3 | RNVC: 2
5000264016: RNCC: 5 | RNVC: 2
5000264016: RNCC: 5 | RNVC: 9
SV4016: RNCC: 5 | RNVC: 9

17 Mar 1983

5120-14-511-1457
Box Wrench

145111457
8819537000: RNCC: 3 | RNVC: 2

4 Dec 1998

5120-14-299-6383
Drive Pin Punch

142996383
6101180000: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-535-9741
Hand Hydraulic Jack

145359741
1150-1K: RNCC: 3 | RNVC: 9
91817660: RNCC: 5 | RNVC: 2
RAS150-1K: RNCC: 5 | RNVC: 9
CK15: RNCC: 5 | RNVC: 9

2 Jul 2003

5120-14-281-1777
Drive Pin Punch

142811777
152934: RNCC: 3 | RNVC: 2
111208: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-218-3364
Fuse Puller

142183364
5920BB6,3X32MM: RNCC: 2 | RNVC: 2
0883120: RNCC: 5 | RNVC: 2
9091: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-468-5672
Socket Wrench

144685672
877622: RNCC: 3 | RNVC: 2
877622: RNCC: 5 | RNVC: 2

9 Mar 1994

5120-14-324-1921
Mechanical Puller

143241921
7-010448-2: RNCC: 3 | RNVC: 2
7-010448-2: RNCC: 5 | RNVC: 9
0UT3389: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-378-5522
Mechanical Puller

143785522
6802J32-1667-00: RNCC: 3 | RNVC: 2
6802360A32-1667-00: RNCC: 5 | RNVC: 2

11 Aug 1982

5120-14-519-3829
Plier Wrench

145193829
514A.240R: RNCC: 3 | RNVC: 2
0714 09 18: RNCC: 5 | RNVC: 2
514-240R: RNCC: 5 | RNVC: 2

15 Mar 2000

5120-14-446-1416
Aligning Punch

144461416
39959450: RNCC: 3 | RNVC: 2
39959450: RNCC: 5 | RNVC: 9

6 Mar 1991

5120-14-425-9526
Aligning Punch

144259526
500427XTH20R2: RNCC: 3 | RNVC: 2

28 Jul 1988

5120-14-369-4666
Hand Screw Jack

143694666
40303-5TSANSVIS-MODIF A: RNCC: 3 | RNVC: 2
40303-5TSANSVISM0DA: RNCC: 5 | RNVC: 2

17 Apr 1981

5120-14-437-4301
Mechanical Puller

144374301
16380915: RNCC: 3 | RNVC: 2
16380915: RNCC: 5 | RNVC: 9

31 Jan 1990

5120-14-309-7628
Box Wrench

143097628
RT8244: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-488-3107
Socket Wrench

144883107
74.1/4: RNCC: 3 | RNVC: 2
3148511190203: RNCC: 5 | RNVC: 2
74-1-4: RNCC: 5 | RNVC: 2
0119020: RNCC: 5 | RNVC: 2

30 Apr 1997

5120-14-218-9665
Box Wrench

142189665
113-14X15: RNCC: 3 | RNVC: 9
DEM113-14X15: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-274-8170
Pipe Wrench

142748170
NO PRIMARY REF14-274-8170: RNCC: 3 | RNVC: 2
75421-30: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-468-5921
Hand Hydraulic Jack

144685921
CBT-3: RNCC: 3 | RNVC: 2
CBT3: RNCC: 3 | RNVC: 2
3272670352087: RNCC: 5 | RNVC: 2
91751752: RNCC: 5 | RNVC: 2
91743571: RNCC: 5 | RNVC: 2
HB3: RNCC: 5 | RNVC: 9

9 Mar 1994

5120-14-466-2436
Seal Inserter

144662436
TB10533: RNCC: 3 | RNVC: 2
M13574-25: RNCC: 5 | RNVC: 9

3 Nov 1993

5120-14-440-5338
Drill Guide

144405338
0S22952: RNCC: 3 | RNVC: 2
85-694-0735: RNCC: 6 | RNVC: 9

17 Jul 1990

5120-14-537-5131
Seal Inserter

145375131
010-444-00826-109: RNCC: 3 | RNVC: 2

3 Nov 2003

5120-14-463-9786
Seal Inserter

144639786
854-500-338-0: RNCC: 3 | RNVC: 2

7 Jul 1993

5120-14-445-5519
Socket Wrench

144455519
06182: RNCC: 3 | RNVC: 2
SYQ0086: RNCC: 5 | RNVC: 2
ASC1588680: RNCC: 5 | RNVC: 9

14 Feb 1991

5120-14-451-3532
Screw Extractor

144513532
885.EH1: RNCC: 3 | RNVC: 2
0690 141 1: RNCC: 5 | RNVC: 2
91627173: RNCC: 5 | RNVC: 2
3148512104858: RNCC: 5 | RNVC: 2
885EH1: RNCC: 5 | RNVC: 2
0210485: RNCC: 5 | RNVC: 9

14 Nov 1991

5120-14-202-9660
Socket Wrench

142029660
4068: RNCC: 3 | RNVC: 2

1 Jan 1963

5120-14-244-4059
Socket Wrench

142444059
80-30: RNCC: 3 | RNVC: 2
3107230: RNCC: 3 | RNVC: 2
122-30: RNCC: 3 | RNVC: 9
DEM122-30: RNCC: 5 | RNVC: 9
VIR3107230: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-433-0617
Mechanical Puller

144330617
NO PRIMARY REF14-433-0617: RNCC: 3 | RNVC: 2
0075187: RNCC: 5 | RNVC: 2
U.306-130N: RNCC: 5 | RNVC: 2
U306-130N: RNCC: 5 | RNVC: 2

7 Jul 1989

5120-14-340-1822
Lamp Extractor

143401822
031753717: RNCC: 3 | RNVC: 9
7594: RNCC: 5 | RNVC: 2
7594-31753717: RNCC: 5 | RNVC: 2

14 Feb 1977

5120-14-386-1552
Mechanical Puller

143861552
6801J32-1669-00: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-486-5622
Hand Rivet Set

144865622
RT13665: RNCC: 3 | RNVC: 2

24 Mar 1997

5120-14-542-4932
Hand Hammer

145424932
205A.80: RNCC: 3 | RNVC: 2
205A.80: RNCC: 5 | RNVC: 2
0147100: RNCC: 5 | RNVC: 2
XX070875: RNCC: 6 | RNVC: 9

21 Jul 2004

5120-14-472-3682
Hand Hammer

144723682
866A.32: RNCC: 3 | RNVC: 2
866A32: RNCC: 5 | RNVC: 2
3148512096450: RNCC: 5 | RNVC: 2
0209645: RNCC: 5 | RNVC: 9

19 Oct 1994

5120-14-256-8119
Socket Wrench Set

142568119
065030010009: RNCC: 3 | RNVC: 2

1 Jan 1969

5120-14-385-6748
Socket Wrench

143856748
GSM482-007F17: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-432-2631
Aligning Punch

144322631
853-202-729-0: RNCC: 3 | RNVC: 2

31 May 1989

5120-14-350-2598
Mechanical Puller

143502598
E247E176: RNCC: 3 | RNVC: 2

14 Jun 1978

5120-14-274-8510
Socket Wrench

142748510
0117350: RNCC: 3 | RNVC: 2
80-33: RNCC: 3 | RNVC: 2
3107233: RNCC: 3 | RNVC: 2
122-33: RNCC: 3 | RNVC: 9
72-33: RNCC: 5 | RNVC: 2
72.33: RNCC: 5 | RNVC: 2
DEM122-33: RNCC: 5 | RNVC: 9
VIR3107233: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-530-6411
Seal Inserter

145306411
D47730R1: RNCC: 3 | RNVC: 2

1 Jul 2002

5120-14-250-8297
Rawhide Mallet

142508297
3902-40: RNCC: 3 | RNVC: 9

1 Jan 1968

5120-14-459-1583
Screw Extractor

144591583
45056052: RNCC: 3 | RNVC: 2
45056052: RNCC: 5 | RNVC: 9

19 Nov 1992

5120-14-511-7680
Socket Wrench Set

145117680
MO-69308/23: RNCC: 3 | RNVC: 2

15 Jan 1999

5120-14-424-9129
Tack Claw

144249129
7185920001: RNCC: 3 | RNVC: 2
7185-1200X22: RNCC: 3 | RNVC: 2

14 Jun 1988

5120-14-413-3191
Box Wrench

144133191
50.99: RNCC: 3 | RNVC: 2
3148511072509: RNCC: 5 | RNVC: 2
50-99: RNCC: 5 | RNVC: 2
0107250: RNCC: 5 | RNVC: 9

26 Nov 1986

5120-14-238-9541
Mechanical Puller

142389541
12201551: RNCC: 3 | RNVC: 2
12201551: RNCC: 3 | RNVC: 9

1 Jan 1967

5120-14-401-7496
Putty Knife

144017496
NO PRIMARY REF14-401-7496: RNCC: 3 | RNVC: 2
2976-6: RNCC: 5 | RNVC: 9

13 Jun 1985

5120-14-322-7761
Putty Knife

143227761
C0UTEAUAMASTICTR0USSER0X0TUB: RNCC: 3 | RNVC: 2
9412-3: RNCC: 3 | RNVC: 2
830-3: RNCC: 5 | RNVC: 2
601-30: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-485-0911
Oil Filter Wrench

144850911
0M3279: RNCC: 3 | RNVC: 2
OM3279: RNCC: 5 | RNVC: 2

6 Jan 1997

5120-14-485-8840
Socket Wrench

144858840
K7739-NERVUS3/8X7/16WW: RNCC: 3 | RNVC: 2
NERVUS3/8X7/16WW: RNCC: 5 | RNVC: 2

19 Feb 1997

5120-14-385-3132
Seal Inserter

143853132
360A93-3233-20: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-235-3906
Wood Mallet

142353906
036890021: RNCC: 3 | RNVC: 2
787: RNCC: 3 | RNVC: 2
4557: RNCC: 3 | RNVC: 9
SYQ0889: RNCC: 5 | RNVC: 2
7640: RNCC: 5 | RNVC: 9
D640E00G0LDENBER: RNCC: 5 | RNVC: 9
344-13: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-527-7172
Mechanical Puller

145277172
888-493-700-1: RNCC: 3 | RNVC: 2

14 Nov 2001

5120-14-321-8101
Mechanical Puller

143218101
3160S95-63-030: RNCC: 3 | RNVC: 2
85-100-3206: RNCC: 6 | RNVC: 9

1 Jan 1975

5120-14-415-4724
Mechanical Puller

144154724
4704: RNCC: 3 | RNVC: 2

18 May 1987

5120-14-338-9025
Mechanical Puller

143389025
8812054000: RNCC: 3 | RNVC: 2

17 Dec 1976

5120-14-517-9779
Mechanical Puller

145179779
TC3123G001: RNCC: 3 | RNVC: 2

19 Jan 2000

5120-14-371-7919
Hand Hammer

143717919
M0B402-100EC: RNCC: 3 | RNVC: 2
7275: RNCC: 3 | RNVC: 2
402-100EC: RNCC: 5 | RNVC: 2
85-691-5192: RNCC: 6 | RNVC: 9

5 Aug 1981

5120-14-528-0645
Seal Inserter

145280645
888-512-400-2: RNCC: 3 | RNVC: 2
888-512-400-1: RNCC: 5 | RNVC: 2

12 Dec 2001

5120-14-201-5346
Machinist's Scriber

142015346
PTS: RNCC: 3 | RNVC: 2
73-31-200: RNCC: 3 | RNVC: 2
3730: RNCC: 3 | RNVC: 2
0714 70 04: RNCC: 5 | RNVC: 2
1586: RNCC: 5 | RNVC: 2
906: RNCC: 5 | RNVC: 2
1580: RNCC: 5 | RNVC: 9
5984-4-210: RNCC: 5 | RNVC: 9
DELA.1580.00: RNCC: 5 | RNVC: 9
85-679-6120: RNCC: 6 | RNVC: 9

1 Jan 1962

5120-14-306-4357
Box Wrench

143064357
8810048004: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-539-8821
Hand Shovel

145398821
LTCA12: RNCC: 3 | RNVC: 2

17 Feb 2004

5120-14-216-5536
Hand Hammer

142165536
136: RNCC: 3 | RNVC: 2
300060: RNCC: 5 | RNVC: 2
136: RNCC: 5 | RNVC: 2

1 Jan 1965

5120-14-417-1003
Mechanical Puller

144171003
530567: RNCC: 3 | RNVC: 2

1 Jul 1987

5120-14-540-8751
Torque Screwdriver

145408751
A.402: RNCC: 3 | RNVC: 2
3059002270: RNCC: 5 | RNVC: 2
3148516660640: RNCC: 5 | RNVC: 2
A402: RNCC: 5 | RNVC: 2
0202977A00: RNCC: 5 | RNVC: 2
A.402: RNCC: 5 | RNVC: 2

29 Apr 2004

5120-14-500-9608
Socket Wrench

145009608
D69402610000: RNCC: 3 | RNVC: 2
F300 0T 024 9820: RNCC: 6 | RNVC: 9

29 Oct 1997

5120-14-385-3117
Seal Inserter

143853117
360A93-3226-00: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-359-2343
Socket Wrench

143592343
Y075-008-003: RNCC: 3 | RNVC: 2
85-689-5600: RNCC: 6 | RNVC: 9

2 Oct 1979

5120-14-486-2849
Mechanical Puller

144862849
F117177: RNCC: 3 | RNVC: 2

10 Mar 1997

5120-14-277-3496
Mechanical Puller

142773496
8810120009: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-454-9330
Hand Hammer

144549330
1262.100: RNCC: 3 | RNVC: 2
1262-100: RNCC: 5 | RNVC: 2
3148512259152: RNCC: 5 | RNVC: 2
18509499-2: RNCC: 5 | RNVC: 2
300-6411: RNCC: 5 | RNVC: 2
0715 732 100: RNCC: 5 | RNVC: 2
0715 732 125: RNCC: 5 | RNVC: 2
T586-104: RNCC: 5 | RNVC: 2
FACOM1262.100: RNCC: 5 | RNVC: 9
0225915: RNCC: 5 | RNVC: 9

29 Apr 1992

5120-14-424-2471
Mechanical Puller

144242471
01015510: RNCC: 3 | RNVC: 2
91623537: RNCC: 5 | RNVC: 2

19 May 1988

5120-14-361-6098
Socket Wrench

143616098
16316876: RNCC: 3 | RNVC: 2
16316876: RNCC: 5 | RNVC: 9

20 Feb 1980

5120-14-469-9787
Mechanical Puller

144699787
008759050P: RNCC: 3 | RNVC: 2

24 May 1994

5120-14-549-9406
Plier Clamp

145499406
T5.2L: RNCC: 3 | RNVC: 2

18 May 2006

5120-14-264-9701
Marlinespike

142649701
14-16ACIER15: RNCC: 2 | RNVC: 2

1 Jan 1970

5120-14-471-0325
Mechanical Puller

144710325
404314: RNCC: 3 | RNVC: 2
404314-001: RNCC: 5 | RNVC: 9

20 Jul 1994

5120-14-297-1292
Hand Rivet Set

142971292
25SP44J: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-443-8035
Mechanical Puller

144438035
E3544-1: RNCC: 3 | RNVC: 2
603940: RNCC: 5 | RNVC: 2

5 Dec 1990

5120-14-401-7494
Float

144017494
NO PRIMARY REF14-401-7494: RNCC: 3 | RNVC: 2
T1BIS: RNCC: 5 | RNVC: 9

13 Jun 1985

5120-14-476-9326
Plier Wrench

144769326
513.10: RNCC: 3 | RNVC: 2
3148511817360: RNCC: 5 | RNVC: 2
0714 09 06: RNCC: 5 | RNVC: 2
513.10: RNCC: 5 | RNVC: 2
0181736: RNCC: 5 | RNVC: 9

12 Jul 1995

5120-14-419-2636
Driftpin

144192636
530734: RNCC: 3 | RNVC: 2

16 Oct 1987

5120-14-281-7595
Mechanical Puller

142817595
A125862: RNCC: 3 | RNVC: 2
100156: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-200-5703
Box Wrench

142005703
105-19X21: RNCC: 3 | RNVC: 2

1 Jan 1962

5120-14-534-3251
Pipe Wrench

145343251
NNM0021010400235: RNCC: 2 | RNVC: 2

19 Mar 2003

5120-14-348-8391
Driftpin

143488391
D47852: RNCC: 3 | RNVC: 2

19 Apr 1978

5120-14-517-5089
Box Wrench

145175089
GS146-24X26: RNCC: 3 | RNVC: 2
1.70.1918: RNCC: 5 | RNVC: 2

3 Jan 2000

5120-14-200-3027
Box Wrench

142003027
55-14X17: RNCC: 3 | RNVC: 2
105N14X17: RNCC: 3 | RNVC: 2
111-14X17: RNCC: 3 | RNVC: 9
55-14-17: RNCC: 5 | RNVC: 2
130271: RNCC: 5 | RNVC: 2
DEM111-14X17: RNCC: 5 | RNVC: 9

1 Jan 1962

5120-14-459-5452
Lamp Extractor

144595452
319155.02: RNCC: 3 | RNVC: 9
7596: RNCC: 5 | RNVC: 2

10 Dec 1992

5120-14-281-7620
Mechanical Puller

142817620
A124174: RNCC: 3 | RNVC: 2
100097: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-430-2354
Drain Plug Wrench

144302354
PL M25 16A REP2: RNCC: 3 | RNVC: 2

13 Mar 1989

5120-14-451-5432
Box Wrench

144515432
13681ST08: RNCC: 3 | RNVC: 9
89437807: RNCC: 5 | RNVC: 2

21 Nov 1991

5120-14-388-9219
Mechanical Puller

143889219
8813906000: RNCC: 3 | RNVC: 2

29 Nov 1983

5120-14-459-1669
Seal Inserter

144591669
45215430: RNCC: 3 | RNVC: 2
45215430: RNCC: 5 | RNVC: 9

19 Nov 1992

5120-14-433-6101
Mechanical Puller

144336101
8815401000: RNCC: 3 | RNVC: 2
89415035: RNCC: 5 | RNVC: 2

2 Aug 1989

5120-14-481-7157
Hand Screw Jack

144817157
BMV5-20-840: RNCC: 3 | RNVC: 2

29 May 1996

5120-14-425-9434
Aligning Punch

144259434
TH20C2-1-3A1: RNCC: 3 | RNVC: 2

28 Jul 1988

5120-14-386-6818
Mechanical Puller

143866818
853-200-194-0: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-272-4053
Box Wrench

142724053
55-9X11: RNCC: 3 | RNVC: 2
3005115: RNCC: 3 | RNVC: 2
VIR3005115: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-318-7777
Hand Shovel

143187777
NO PRIMARY REF14-318-7777: RNCC: 3 | RNVC: 2
NT43-01JUIN52PELLESEULE: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-436-4818
Mechanical Puller

144364818
350A93-3202-00: RNCC: 3 | RNVC: 2

3 Jan 1990

5120-14-331-5594
Socket Wrench

143315594
144-12: RNCC: 3 | RNVC: 9
DEM144-12: RNCC: 5 | RNVC: 9

2 Jul 1975

5120-14-237-9549
Drill Guide

142379549
0210820: RNCC: 3 | RNVC: 2
885.G2: RNCC: 5 | RNVC: 2
885G2: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-280-9376
Socket Wrench

142809376
7-148372-2: RNCC: 3 | RNVC: 2
148376: RNCC: 5 | RNVC: 9
7-148372-2: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-488-5195
Seal Inserter

144885195
214473-0: RNCC: 3 | RNVC: 2
FORMEDECOU860: RNCC: 5 | RNVC: 2
85-695-4565: RNCC: 6 | RNVC: 9

14 May 1997

5120-14-220-7489
Socket Wrench

142207489
BB229-29: RNCC: 3 | RNVC: 9

1 Jan 1965

5120-14-490-0257
Drill Guide

144900257
83-9-11-01-600-07-4: RNCC: 3 | RNVC: 2

9 Sep 1997

5120-14-550-3186
Tacker

145503186
PC4000ML: RNCC: 3 | RNVC: 2

15 Jun 2006

5120-14-485-2715
Hand Vise

144852715
MT841: RNCC: 3 | RNVC: 2
3021: RNCC: 5 | RNVC: 2

15 Jan 1997

5120-14-425-9484
Hand Screw Jack

144259484
4606: RNCC: 3 | RNVC: 2

28 Jul 1988

5120-14-360-8274
Socket Wrench

143608274
L.21M: RNCC: 3 | RNVC: 2
3148510312606: RNCC: 5 | RNVC: 2
L.14M: RNCC: 5 | RNVC: 2
L14M: RNCC: 5 | RNVC: 2
1113752N00: RNCC: 5 | RNVC: 2
91489193: RNCC: 5 | RNVC: 2
0031260: RNCC: 5 | RNVC: 9

19 Dec 1979

5120-14-294-0718
Pipe Vise

142940718
2002-1: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-364-1785
Mechanical Puller

143641785
16799884: RNCC: 3 | RNVC: 2
16799884: RNCC: 3 | RNVC: 9

7 Aug 1980

5120-14-399-0987
Box Wrench

143990987
132134: RNCC: 3 | RNVC: 2

6 Mar 1985

5120-14-464-2451
Box Wrench

144642451
854-500-354-0: RNCC: 3 | RNVC: 2

28 Jul 1993

5120-14-276-3293
Mechanical Puller

142763293
NO PRIMARY REF14-276-3293: RNCC: 3 | RNVC: 2
6077-4: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-542-2410
Mechanical Puller

145422410
922780108: RNCC: 3 | RNVC: 2
922780108: RNCC: 5 | RNVC: 9

8 Jul 2004

5120-14-237-9548
Drill Guide

142379548
0210800: RNCC: 3 | RNVC: 2
885.G1: RNCC: 5 | RNVC: 2
885G1: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-294-0697
Digging Bar

142940697
NO PRIMARY REF14-294-0697: RNCC: 3 | RNVC: 2
1947-200: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-321-9203
Ratchet Wheel

143219203
GSM137-005F14REP14: RNCC: 3 | RNVC: 2
000MA065REP2BIS: RNCC: 5 | RNVC: 2
GSM137-005F14: RNCC: 5 | RNVC: 2
GSM137-05REP14: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-321-9204
Pawl

143219204
GSM137-005F6REP3: RNCC: 3 | RNVC: 2
000MA065REP3: RNCC: 5 | RNVC: 2
GSM137-005F6: RNCC: 5 | RNVC: 2
GSM137-05REP3: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-379-4434
Socket Wrench

143794434
B51838R: RNCC: 3 | RNVC: 2

1 Oct 1982

5120-14-228-0443
Hand Hammer

142280443
0365060301: RNCC: 3 | RNVC: 2
365-600 EC: RNCC: 3 | RNVC: 2
1309X30X80: RNCC: 5 | RNVC: 2

1 Jan 1966

5120-14-430-8231
Crimping Tool Die

144308231
48510: RNCC: 3 | RNVC: 2

22 Mar 1989

5120-14-456-4248
Socket Wrench

144564248
0121435: RNCC: 3 | RNVC: 2
77.PL2D: RNCC: 5 | RNVC: 2

2 Jul 1992

5120-14-425-9569
Aligning Punch

144259569
502182KTH20R2: RNCC: 3 | RNVC: 2

28 Jul 1988

5120-14-376-0341
Mechanical Puller

143760341
8813748000: RNCC: 3 | RNVC: 2

30 Mar 1982

5120-14-528-3459
Mechanical Puller

145283459
8034337W00: RNCC: 3 | RNVC: 2

23 Jan 2002

5120-14-226-8451
Mechanical Puller

142268451
119201: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-294-6523
Socket Wrench

142946523
412728-33: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-533-1419
Seal Inserter

145331419
888-452-013-0: RNCC: 3 | RNVC: 2

23 Jan 2003

5120-14-478-4239
Mechanical Puller

144784239
U.32T2-12: RNCC: 3 | RNVC: 2
3148510680521: RNCC: 5 | RNVC: 2
1113638N00: RNCC: 5 | RNVC: 2
0695 587 861: RNCC: 5 | RNVC: 2
0068052: RNCC: 5 | RNVC: 9

31 Oct 1995

5120-14-326-1761
Box Wrench

143261761
100-20X22: RNCC: 3 | RNVC: 2
113-20X22: RNCC: 3 | RNVC: 9
3272670213746: RNCC: 5 | RNVC: 2
DEM113-20X22: RNCC: 5 | RNVC: 9

2 Jul 1975

5120-14-542-9622
Socket Wrench

145429622
806056: RNCC: 3 | RNVC: 2

14 Aug 2004

5120-14-282-0729
Wood Mallet

142820729
2-0RMEMANCHEFRENE: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-201-5470
Gasoline Blowtorch

142015470
787: RNCC: 3 | RNVC: 2

1 Jan 1962

5120-14-409-4881
Driftpin

144094881
213249: RNCC: 3 | RNVC: 2

28 May 1986

5120-14-436-4280
Mechanical Puller

144364280
G50486: RNCC: 3 | RNVC: 2
G50486: RNCC: 5 | RNVC: 9

3 Jan 1990

5120-14-450-3007
Hand Rivet Set

144503007
67592-5: RNCC: 3 | RNVC: 2

25 Sep 1991

5120-14-452-2046
Socket Wrench Set

144522046
66.P9M: RNCC: 3 | RNVC: 2
3148515316302: RNCC: 5 | RNVC: 2
0531630: RNCC: 5 | RNVC: 9

6 Jan 1992

5120-14-363-4655
Box Wrench

143634655
W3159M: RNCC: 3 | RNVC: 9

9 May 1980

5120-14-433-3111
Seal Inserter

144333111
853-202-516-0: RNCC: 3 | RNVC: 2

19 Jul 1989

5120-14-533-6409
Seal Inserter

145336409
853-203-279-0: RNCC: 3 | RNVC: 2

12 Feb 2003

5120-14-506-1004
Socket Wrench

145061004
YA003900: RNCC: 3 | RNVC: 2

2 Apr 1998

5120-14-388-9206
Mechanical Puller

143889206
8814762000: RNCC: 3 | RNVC: 2

29 Nov 1983

5120-14-398-0111
Driftpin

143980111
0762065R00: RNCC: 3 | RNVC: 2

31 Jan 1985

5120-14-529-0302
Sealant Dispenser

145290302
338720/6: RNCC: 3 | RNVC: 2

5 Mar 2002

5120-14-309-1518
Hand Hammer

143091518
204: RNCC: 3 | RNVC: 2
3148511470008: RNCC: 5 | RNVC: 2
91516070: RNCC: 5 | RNVC: 2
0695 930 056: RNCC: 5 | RNVC: 2
0147000: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-460-6127
Mechanical Puller

144606127
NO PRIMARY REF14-460-6127: RNCC: 3 | RNVC: 2
059080: RNCC: 5 | RNVC: 9

4 Feb 1993

5120-14-347-2626
Hand Hammer Head

143472626
4050001: RNCC: 3 | RNVC: 2
405-32: RNCC: 5 | RNVC: 2

19 Jan 1978

5120-14-501-0111
Seal Inserter

145010111
10463682: RNCC: 3 | RNVC: 2
F300 0T 025 0406: RNCC: 6 | RNVC: 9

29 Oct 1997

5120-14-370-1123
Wrecking Bar

143701123
NO PRIMARY REF14-370-1123: RNCC: 3 | RNVC: 2
130076: RNCC: 5 | RNVC: 2
268-2: RNCC: 5 | RNVC: 2

18 May 1981

5120-14-481-1762
Socket Wrench

144811762
GS141-13: RNCC: 3 | RNVC: 2

25 Apr 1996

5120-14-273-6996
Hand Hammer Head

142736996
E71-015-160: RNCC: 2 | RNVC: 2
200-22: RNCC: 3 | RNVC: 2
0292200: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-207-5083
Hammer Handle

142075083
NO PRIMARY REF14-207-5083: RNCC: 3 | RNVC: 2
36-500X32X42FRENE: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-550-8717
Mechanical Puller

145508717
8817294000: RNCC: 3 | RNVC: 2

25 Jul 2006

5120-14-471-0975
Seal Inserter

144710975
0U134787: RNCC: 3 | RNVC: 2
0U134787: RNCC: 5 | RNVC: 2
0U134787: RNCC: 5 | RNVC: 2
0U134787: RNCC: 5 | RNVC: 9

27 Jul 1994

5120-14-312-2845
Mechanical Puller

143122845
8811248000: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-466-1146
Wire Stretcher

144661146
REMDCHEGZLE-SERT-080045: RNCC: 3 | RNVC: 2

27 Oct 1993

5120-14-200-7115
Socket Wrench

142007115
R613-30-14: RNCC: 2 | RNVC: 2
2944S: RNCC: 3 | RNVC: 9
2944: RNCC: 5 | RNVC: 9

1 Jan 1962

5120-14-360-2394
Hand Hydraulic Jack

143602394
1689001: RNCC: 3 | RNVC: 2
0124680C00: RNCC: 5 | RNVC: 2
168-9001: RNCC: 5 | RNVC: 2
FOE1689001: RNCC: 5 | RNVC: 9

23 Nov 1979

5120-14-433-6857
Lamp Cap Extractor

144336857
332A93-3510-20: RNCC: 3 | RNVC: 2

2 Aug 1989

5120-14-302-5053
Mechanical Puller

143025053
NO PRIMARY REF14-302-5053: RNCC: 3 | RNVC: 2
42-903-04-027: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-369-6973
Socket Wrench

143696973
BB242: RNCC: 3 | RNVC: 9

17 Apr 1981

5120-14-314-1976
Box Wrench

143141976
A0133012F11: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-432-7063
Seal Inserter

144327063
OUT11814-1: RNCC: 3 | RNVC: 2
0UT11814-1: RNCC: 5 | RNVC: 2

21 Jun 1989

5120-14-480-9466
Hammer Handle

144809466
6651: RNCC: 3 | RNVC: 2
6651000301: RNCC: 5 | RNVC: 2

11 Apr 1996

5120-14-401-7498
Putty Knife

144017498
NO PRIMARY REF14-401-7498: RNCC: 3 | RNVC: 2
190-16: RNCC: 5 | RNVC: 9

13 Jun 1985

5120-14-399-8002
Mechanical Puller

143998002
853-201-662-0: RNCC: 3 | RNVC: 2

14 Mar 1985

5120-14-210-8470
Socket Wrench

142108470
NO PRIMARY REF14-210-8470: RNCC: 3 | RNVC: 2
2200046: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-404-1179
Socket Wrench

144041179
1719Z: RNCC: 3 | RNVC: 2
C2M-99-12.11: RNCC: 3 | RNVC: 2

11 Sep 1985

5120-14-274-8490
Machinist's Vise

142748490
4215-120: RNCC: 3 | RNVC: 9

1 Jan 1971

5120-14-344-8725
Jaw Cable Grip

143448725
SBDS16-20-17SILIC0NE: RNCC: 3 | RNVC: 2
EC66E18-18: RNCC: 3 | RNVC: 9

9 Sep 1977

5120-14-369-6951
Pipe Wrench

143696951
BBW220: RNCC: 3 | RNVC: 9

17 Apr 1981

5120-14-542-9426
Mechanical Puller

145429426
8360033: RNCC: 3 | RNVC: 2
8360033: RNCC: 5 | RNVC: 2

14 Aug 2004

5120-14-458-5225
Hand Hydraulic Jack

144585225
MR15BEIGE VERDATRE: RNCC: 3 | RNVC: 2
29646: RNCC: 5 | RNVC: 2
89232683: RNCC: 5 | RNVC: 2
29646: RNCC: 5 | RNVC: 9

23 Oct 1992

5120-14-369-4933
Mechanical Puller

143694933
70353447: RNCC: 3 | RNVC: 2
7035-34-47: RNCC: 5 | RNVC: 9
70353447: RNCC: 5 | RNVC: 9
85-691-1623: RNCC: 6 | RNVC: 9

17 Apr 1981

5120-14-406-8000
Box Wrench

144068000
55.7/16X1/2: RNCC: 3 | RNVC: 2
3148511118801: RNCC: 5 | RNVC: 2
55 7/16 X 1/2: RNCC: 5 | RNVC: 2
0111880: RNCC: 5 | RNVC: 9

8 Jan 1986

5120-14-468-7872
Ratchet Wrench

144687872
J150P: RNCC: 3 | RNVC: 2
J-150-P: RNCC: 3 | RNVC: 2
3272670283374: RNCC: 5 | RNVC: 2

22 Mar 1994

5120-14-528-6724
Hammer Handle

145286724
6602000301: RNCC: 3 | RNVC: 2
SYQ0702: RNCC: 5 | RNVC: 2

5 Feb 2002

5120-14-351-2541
Tool Handle Wedge

143512541
SFIX5: RNCC: 3 | RNVC: 2

10 Aug 1978

5120-14-545-2692
Loop Clamp Inserter

145452692
6501CDC160: RNCC: 3 | RNVC: 2

30 Mar 2005

5120-14-376-7153
Mechanical Puller

143767153
16818348: RNCC: 3 | RNVC: 2

28 Apr 1982

5120-14-417-1688
Mechanical Puller

144171688
4A422W26H6: RNCC: 3 | RNVC: 2
85-692-5392: RNCC: 6 | RNVC: 9

1 Jul 1987

5120-14-427-6513
Drill Guide

144276513
NO PRIMARY REF14-427-6513: RNCC: 3 | RNVC: 2
E0949646: RNCC: 5 | RNVC: 9

27 Oct 1988

5120-14-432-8873
Mechanical Puller

144328873
M4Z7101929820: RNCC: 3 | RNVC: 2

28 Jun 1989

5120-14-306-3715
Mechanical Puller

143063715
NO PRIMARY REF14-306-3715: RNCC: 3 | RNVC: 2
RT4934: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-511-6653
Mechanical Puller

145116653
5329-254-000: RNCC: 3 | RNVC: 2
5329-254-000: RNCC: 5 | RNVC: 2

8 Jan 1999

5120-14-461-3532
Seal Inserter

144613532
0455467Y00: RNCC: 3 | RNVC: 2

9 Mar 1993

5120-14-420-4979
Mechanical Puller

144204979
1824666: RNCC: 3 | RNVC: 9

10 Dec 1987

5120-14-347-9501
Mechanical Puller

143479501
MAS4708: RNCC: 3 | RNVC: 2

29 Mar 1978

5120-14-347-9496
Driftpin

143479496
MAS4713: RNCC: 3 | RNVC: 2
004713: RNCC: 5 | RNVC: 2

29 Mar 1978

5120-14-550-6588
Pike Pole

145506588
751004: RNCC: 3 | RNVC: 2

6 Jul 2006

5120-14-463-3247
Socket Wrench

144633247
0000072100: RNCC: 3 | RNVC: 2

9 Jun 1993

5120-14-400-6419
Hand Hammer

144006419
209-30ENX: RNCC: 3 | RNVC: 2

8 May 1985

5120-14-441-0438
Jaw Cable Grip

144410438
TID22154: RNCC: 3 | RNVC: 2

16 Aug 1990

5120-14-373-5250
C Clamp

143735250
450-220: RNCC: 3 | RNVC: 2
3272670255753: RNCC: 5 | RNVC: 2

21 Oct 1981

5120-14-322-7740
Socket Wrench

143227740
91-30: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-459-1626
Seal Inserter

144591626
45056300: RNCC: 3 | RNVC: 2
45056300: RNCC: 5 | RNVC: 9

19 Nov 1992

5120-14-322-2396
Mechanical Puller

143222396
C47041: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-546-4190
Oil Filter Wrench

145464190
KL-CC15P106: RNCC: 3 | RNVC: 2
5000262655: RNCC: 5 | RNVC: 2

4 Jul 2005

5120-14-350-5918
Plastic Mallet

143505918
207-32CB: RNCC: 3 | RNVC: 2

12 Jul 1978

5120-14-249-9367
Socket Wrench

142499367
C54505: RNCC: 3 | RNVC: 2
100846: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-208-2088
Digging Pick

142082088
NO PRIMARY REF14-208-2088: RNCC: 3 | RNVC: 2
FT380RT5-323A: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-200-9342
Socket Wrench

142009342
74.4: RNCC: 3 | RNVC: 2
291-P4: RNCC: 3 | RNVC: 2
291P4: RNCC: 3 | RNVC: 2
810-3: RNCC: 3 | RNVC: 2
3148511188200: RNCC: 5 | RNVC: 2
74-4: RNCC: 5 | RNVC: 2
3272670238329: RNCC: 5 | RNVC: 2
4101-4: RNCC: 5 | RNVC: 2
91336418: RNCC: 5 | RNVC: 2
0118820: RNCC: 5 | RNVC: 9

1 Jan 1962

5120-14-511-3834
Mechanical Puller

145113834
MGB093-24: RNCC: 3 | RNVC: 2
MGB093-24: RNCC: 5 | RNVC: 2

16 Dec 1998

5120-14-250-8384
Open End Box Wrench

142508384
100F24X27: RNCC: 3 | RNVC: 2
3272670292871: RNCC: 5 | RNVC: 2
100F-24X27: RNCC: 5 | RNVC: 9
103-24X27: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-464-2985
Spanner Wrench Set

144642985
683061128: RNCC: 3 | RNVC: 2
6830-61128: RNCC: 5 | RNVC: 2

28 Jul 1993

5120-14-517-8892
Socket Wrench

145178892
GS141-30: RNCC: 3 | RNVC: 2
1.70.1704: RNCC: 5 | RNVC: 2

17 Jan 2000

5120-14-553-9931
Hand Hammer

145539931
322-32: RNCC: 3 | RNVC: 2

6 Jun 2007

5120-14-395-0740
Mechanical Puller

143950740
H46688: RNCC: 3 | RNVC: 2

2 Oct 1984

5120-14-478-2963
Hand Hammer

144782963
94009: RNCC: 3 | RNVC: 2
310-40-FB: RNCC: 3 | RNVC: 2
310.40FB: RNCC: 3 | RNVC: 2
0009400901: RNCC: 3 | RNVC: 2
3272670251632: RNCC: 5 | RNVC: 2

20 Oct 1995

5120-14-462-1944
Oil Filter Wrench

144621944
U.46PL: RNCC: 3 | RNVC: 2
3148510701813: RNCC: 5 | RNVC: 2
U46PL: RNCC: 5 | RNVC: 2
91642755: RNCC: 5 | RNVC: 2
0714 57 12: RNCC: 5 | RNVC: 2
0070181: RNCC: 5 | RNVC: 9

15 Apr 1993

5120-14-458-0748
Hand Hammer

144580748
79701: RNCC: 3 | RNVC: 2

7 Oct 1992

5120-14-439-6214
Mechanical Puller

144396214
6801G32-1000-00: RNCC: 3 | RNVC: 2

16 May 1990

5120-14-549-1325
Box Wrench

145491325
132522: RNCC: 3 | RNVC: 2

3 Mar 2006

5120-14-478-2779
Mechanical Puller

144782779
2301-0134-001: RNCC: 3 | RNVC: 2

18 Oct 1995

5120-14-437-0203
Socket Wrench

144370203
XE90-81: RNCC: 3 | RNVC: 2

10 Jan 1990

5120-14-548-6386
Mechanical Puller

145486386
F27228000: RNCC: 3 | RNVC: 2

27 Jan 2006

5120-14-410-3519
Mechanical Puller

144103519
8812317000: RNCC: 3 | RNVC: 2

18 Jun 1986

5120-14-421-3343
Mechanical Puller

144213343
536640: RNCC: 3 | RNVC: 2

14 Jan 1988

5120-14-525-2650
Seal Inserter

145252650
10604980: RNCC: 3 | RNVC: 2

23 May 2001

5120-14-536-9546
Machinist's Vise

145369546
21365: RNCC: 3 | RNVC: 2
XX073672: RNCC: 6 | RNVC: 9

24 Sep 2003

5120-14-425-9576
Aligning Punch

144259576
502189TTH20R2: RNCC: 3 | RNVC: 2

28 Jul 1988

5120-14-517-3802
Box Wrench

145173802
0XB101-410-000-02: RNCC: 3 | RNVC: 2

8 Dec 1999

5120-14-385-3379
Mechanical Puller

143853379
365A93-3361-00: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-331-5608
C Clamp

143315608
449-80: RNCC: 3 | RNVC: 2
3458080: RNCC: 3 | RNVC: 2
143-80: RNCC: 3 | RNVC: 2
4231-80: RNCC: 3 | RNVC: 9
271-80: RNCC: 5 | RNVC: 2
271.80: RNCC: 5 | RNVC: 2
3272670221956: RNCC: 5 | RNVC: 2
0162640: RNCC: 5 | RNVC: 9

2 Jul 1975

5120-14-421-6341
Ratchet Wrench

144216341
0373-0U119521: RNCC: 3 | RNVC: 2

20 Jan 1988

5120-14-287-8413
Box Wrench

142878413
58080: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-446-0610
Mechanical Puller

144460610
SV5069: RNCC: 3 | RNVC: 2
5000265069: RNCC: 3 | RNVC: 2
5000265069: RNCC: 5 | RNVC: 9
SV5069: RNCC: 5 | RNVC: 9

5 Mar 1991

5120-14-522-2904
Box Wrench

145222904
M16820: RNCC: 3 | RNVC: 2

19 Oct 2000

5120-14-461-6476
Hammer Handle

144616476
03-108421: RNCC: 3 | RNVC: 2

19 Mar 1993

5120-14-397-6298
Caulking Gun Nozzle

143976298
220581: RNCC: 3 | RNVC: 2
220581: RNCC: 5 | RNVC: 2
220581: RNCC: 5 | RNVC: 9
8630: RNCC: 5 | RNVC: 9

14 Dec 1984

5120-14-375-1803
Aligning Punch

143751803
16380484: RNCC: 3 | RNVC: 2
16380484: RNCC: 5 | RNVC: 9

26 Feb 1982

5120-14-466-5914
Gear Inserter

144665914
851-500-006-0: RNCC: 3 | RNVC: 2

17 Nov 1993

5120-14-526-6481
Socket Wrench

145266481
280-2707: RNCC: 3 | RNVC: 2
AE3-VP105: RNCC: 3 | RNVC: 2

9 Aug 2001

5120-14-527-8154
Seal Inserter

145278154
888-496-800-1: RNCC: 3 | RNVC: 2

21 Nov 2001

5120-14-361-8685
Mechanical Puller

143618685
MGB093-27: RNCC: 3 | RNVC: 2
MGB093-27: RNCC: 5 | RNVC: 2

20 Feb 1980

5120-14-387-2073
Mechanical Puller

143872073
D89: RNCC: 3 | RNVC: 2
3148510196893: RNCC: 5 | RNVC: 2

24 Aug 1983

5120-14-446-0569
Seal Inserter

144460569
SV3219: RNCC: 3 | RNVC: 2
5000263219: RNCC: 5 | RNVC: 2
SV3219: RNCC: 5 | RNVC: 9

5 Mar 1991

5120-14-372-1194
Mechanical Puller

143721194
16412385: RNCC: 3 | RNVC: 2
4CX350A: RNCC: 3 | RNVC: 2
16412385: RNCC: 3 | RNVC: 9
4CX350A: RNCC: 5 | RNVC: 9

1 Sep 1981

5120-14-451-7755
Hand Beading Tool

144517755
548978: RNCC: 3 | RNVC: 2

4 Dec 1991

5120-14-397-8220
Socket Wrench

143978220
M4Z6021902101: RNCC: 3 | RNVC: 2

31 Jan 1985

5120-14-483-8639
Gas Torch

144838639
031461: RNCC: 3 | RNVC: 2
31461: RNCC: 5 | RNVC: 2
31461: RNCC: 5 | RNVC: 2
SOUDAGAZ X2000: RNCC: 5 | RNVC: 2
202921: RNCC: 5 | RNVC: 2
31462: RNCC: 5 | RNVC: 2

5 Oct 1996

5120-14-433-6134
Mechanical Puller

144336134
8815596000: RNCC: 3 | RNVC: 2
89415635: RNCC: 5 | RNVC: 2

2 Aug 1989

5120-14-537-6387
Mechanical Puller

145376387
61080857AA: RNCC: 3 | RNVC: 2
61080857AA00: RNCC: 5 | RNVC: 2

17 Nov 2003

5120-14-417-1004
Mechanical Puller

144171004
530569: RNCC: 3 | RNVC: 2

1 Jul 1987

5120-14-308-3322
Hand Hydraulic Jack

143083322
DLT039895: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-283-3904
Open End Box Wrench

142833904
9970-115-311: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-432-8458
Seal Inserter

144328458
NO PRIMARY REF14-432-8458: RNCC: 3 | RNVC: 2
540005: RNCC: 5 | RNVC: 9
540005: RNCC: 5 | RNVC: 9

28 Jun 1989

5120-14-342-3614
Box Wrench

143423614
RT21020: RNCC: 3 | RNVC: 2
85-653-7420: RNCC: 6 | RNVC: 9

14 Apr 1977

5120-14-481-4790
Mechanical Puller

144814790
NO PRIMARY REF14-481-4790: RNCC: 3 | RNVC: 2
815420: RNCC: 5 | RNVC: 9

8 May 1996

5120-14-325-0256
Mechanical Puller

143250256
0S20350: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-516-4284
Mechanical Puller

145164284
TA5076G001: RNCC: 3 | RNVC: 2

22 Sep 1999

5120-14-424-2480
Patternmaker's Vise

144242480
61125: RNCC: 3 | RNVC: 2
91562157: RNCC: 5 | RNVC: 2
SAM61125: RNCC: 5 | RNVC: 9

19 May 1988

5120-14-387-1641
Mechanical Puller

143871641
098045: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-549-5785
Tacker

145495785
40107777: RNCC: 3 | RNVC: 2
MS40: RNCC: 5 | RNVC: 2
01.26.84.74: RNCC: 5 | RNVC: 2

18 Apr 2006

5120-14-432-7118
Seal Inserter

144327118
OUT50327: RNCC: 3 | RNVC: 2
0UT50327: RNCC: 5 | RNVC: 2

21 Jun 1989

5120-14-289-3667
Socket Wrench

142893667
1269: RNCC: 3 | RNVC: 2
0056182115: RNCC: 5 | RNVC: 2
0056182115: RNCC: 5 | RNVC: 9
56182115: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-548-7675
Socket Wrench

145487675
252465983: RNCC: 3 | RNVC: 2

8 Feb 2006

5120-14-552-7396
Socket Wrench

145527396
94A.5,5: RNCC: 3 | RNVC: 2
94A.5,5: RNCC: 5 | RNVC: 2
3148516940223: RNCC: 5 | RNVC: 2

26 Jan 2007

5120-14-469-0579
Crimping Tool Die

144690579
900M08: RNCC: 3 | RNVC: 2
900M08: RNCC: 3 | RNVC: 2
900M08: RNCC: 5 | RNVC: 9

6 Apr 1994

5120-14-400-6414
Hand Hammer

144006414
208-30ENX: RNCC: 3 | RNVC: 2

8 May 1985

5120-14-392-0828
Open End Box Wrench

143920828
853-115-001-0: RNCC: 3 | RNVC: 2

21 Mar 1984

5120-14-439-7989
Tire Iron

144397989
427/68: RNCC: 3 | RNVC: 2
91377964: RNCC: 5 | RNVC: 2
427: RNCC: 5 | RNVC: 2

23 May 1990

5120-14-373-7218
Mechanical Puller

143737218
341A93-3534-00: RNCC: 3 | RNVC: 2

13 Nov 1981

5120-14-404-1104
Socket Wrench

144041104
80-23-P: RNCC: 3 | RNVC: 2
80-23P: RNCC: 3 | RNVC: 2
3272670287594: RNCC: 5 | RNVC: 2
80-23CP: RNCC: 5 | RNVC: 9

11 Sep 1985

5120-14-508-4751
Open End Box Wrench

145084751
42.3/4X7/8: RNCC: 3 | RNVC: 2
0101785: RNCC: 5 | RNVC: 2
3148511017852: RNCC: 5 | RNVC: 2

14 Sep 1998

5120-14-401-9650
Hand Vise Jaw

144019650
301A98574-50: RNCC: 3 | RNVC: 2
301A98574-50: RNCC: 5 | RNVC: 2
301A98574-50: RNCC: 5 | RNVC: 9
301A98574-50: RNCC: 5 | RNVC: 9

26 Jun 1985

5120-14-288-2017
Socket Wrench

142882017
J026: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-204-8262
Box Wrench

142048262
30576: RNCC: 3 | RNVC: 9

1 Jan 1963

5120-14-388-9174
Mechanical Puller

143889174
8813904000: RNCC: 3 | RNVC: 2

29 Nov 1983

5120-14-452-0529
Mechanical Puller

144520529
H47111: RNCC: 3 | RNVC: 2

18 Dec 1991

5120-14-226-4431
Pike Pole

142264431
101170: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-478-4178
Plastic Mallet

144784178
208A.60AB: RNCC: 3 | RNVC: 2
3148511477625: RNCC: 5 | RNVC: 2
0232370A00: RNCC: 5 | RNVC: 2
SYQ0882: RNCC: 5 | RNVC: 2
0536880: RNCC: 5 | RNVC: 9

31 Oct 1995

5120-14-274-8032
Hammer Handle

142748032
E71011C38A260: RNCC: 2 | RNVC: 2

1 Jan 1971

5120-14-464-4958
Drill Guide

144644958
854-600-024-0: RNCC: 3 | RNVC: 2

4 Aug 1993

5120-14-432-7060
Seal Inserter

144327060
OUT11812-1: RNCC: 3 | RNVC: 2
0UT11812-1: RNCC: 5 | RNVC: 2

21 Jun 1989

5120-14-330-2069
Lamp Extractor

143302069
6210AATIRELAMPED11: RNCC: 2 | RNVC: 2
A550-8A: RNCC: 3 | RNVC: 2
A550.8A: RNCC: 3 | RNVC: 2
DX165: RNCC: 5 | RNVC: 2
6210AATIRELAMPED11: RNCC: 5 | RNVC: 9

2 Jul 1975

5120-14-534-1400
Mechanical Puller

145341400
350A93-3318-03: RNCC: 3 | RNVC: 2

12 Mar 2003

5120-14-226-8452
Mechanical Puller

142268452
NO PRIMARY REF14-226-8452: RNCC: 3 | RNVC: 2
470406: RNCC: 5 | RNVC: 9

1 Jan 1966

5120-14-475-3351
Aligning Punch

144753351
0857398E00: RNCC: 3 | RNVC: 2
20184377: RNCC: 5 | RNVC: 2

29 Mar 1995

5120-14-368-0567
Mechanical Puller

143680567
24545945700: RNCC: 3 | RNVC: 2
245459457: RNCC: 5 | RNVC: 9

19 Jan 1981

5120-14-421-3406
Drill Guide

144213406
537040: RNCC: 3 | RNVC: 2

14 Jan 1988

5120-14-220-7477
Socket Wrench

142207477
BE42-21X21: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-388-2327
Socket Wrench

143882327
VTR501-2-11402: RNCC: 3 | RNVC: 2

12 Oct 1983

5120-14-443-9583
Box Wrench

144439583
W-608: RNCC: 3 | RNVC: 9

17 Dec 1990

5120-14-212-2222
Screw Extractor Set

142122222
285.JS5: RNCC: 3 | RNVC: 2
285JS5: RNCC: 5 | RNVC: 2
3148515403002: RNCC: 5 | RNVC: 2
91634539: RNCC: 5 | RNVC: 2
0695 684 727: RNCC: 5 | RNVC: 2
0540300: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-222-7498
Box Wrench

142227498
57-9-16X5-8: RNCC: 3 | RNVC: 2
89 9-16X5-8: RNCC: 3 | RNVC: 2
VIR89 9-16X5-8: RNCC: 5 | RNVC: 9

1 Jan 1966

5120-14-301-1455
Box Wrench

143011455
8811309200: RNCC: 3 | RNVC: 2
C26-63: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-456-7128
Drill Guide

144567128
853-615-070-0: RNCC: 3 | RNVC: 2

24 Jul 1992

5120-14-532-3865
Seal Inserter

145323865
MGF589-27: RNCC: 3 | RNVC: 2

30 Oct 2002

5120-14-432-8445
Seal Inserter

144328445
NO PRIMARY REF14-432-8445: RNCC: 3 | RNVC: 2
509902: RNCC: 5 | RNVC: 9
509902: RNCC: 5 | RNVC: 9

28 Jun 1989

5120-14-397-8224
Socket Wrench

143978224
M4Z6021903901: RNCC: 3 | RNVC: 2

31 Jan 1985

5120-14-257-5995
Socket Wrench

142575995
A117036: RNCC: 3 | RNVC: 2
1005151R00: RNCC: 5 | RNVC: 2

1 Jan 1969

5120-14-294-0714
Machinist's Vise

142940714
NO PRIMARY REF14-294-0714: RNCC: 3 | RNVC: 2
280-150: RNCC: 5 | RNVC: 2
91574588: RNCC: 5 | RNVC: 2
4218-150T0URNANT: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-295-1778
Drive Pin Punch

142951778
000632005P: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-356-5998
Driftpin

143565998
D47368: RNCC: 3 | RNVC: 2
85-689-5010: RNCC: 6 | RNVC: 9

15 May 1979

5120-14-284-9930
Hand Hammer

142849930
860-34: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-433-6387
Hand Beading Tool

144336387
6259-60368: RNCC: 3 | RNVC: 2

2 Aug 1989

5120-14-249-9417
Box Wrench

142499417
62-33X35: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-483-8629
Mechanical Puller

144838629
0-702258-5: RNCC: 3 | RNVC: 2

5 Oct 1996

5120-14-554-3831
Telescoping Pole

145543831
A5Q00004996: RNCC: 3 | RNVC: 2
FDUM291: RNCC: 5 | RNVC: 2

27 Jun 2007

5120-14-298-7864
Hand Hammer

142987864
6AMPC0H5: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-265-0889
Mechanical Puller

142650889
330A93-3320-00: RNCC: 3 | RNVC: 2
330A93-3320-0000: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-381-4216
Socket Wrench

143814216
7702002199: RNCC: 3 | RNVC: 2

25 Jan 1983

5120-14-386-5302
Mechanical Puller

143865302
330A98-2202-00: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-379-0713
Mechanical Puller

143790713
365A93-3245-00: RNCC: 3 | RNVC: 2

6 Sep 1982

5120-14-343-9663
Socket Wrench

143439663
72 5-16H: RNCC: 3 | RNVC: 2
85-686-0384: RNCC: 6 | RNVC: 9

13 Jul 1977

5120-14-431-2618
Mechanical Puller

144312618
332A93-3227-00: RNCC: 3 | RNVC: 2
F300 0T 005 6116: RNCC: 5 | RNVC: 9

12 Apr 1989

5120-14-250-6455
Open End Box Wrench

142506455
552-000MA316DET19: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-414-9546
Mallet Handle

144149546
210.MH14: RNCC: 3 | RNVC: 2
208-40-1: RNCC: 5 | RNVC: 2
3148511476901: RNCC: 5 | RNVC: 2
3148511480649: RNCC: 5 | RNVC: 2
0148064: RNCC: 5 | RNVC: 9

26 Mar 1987

5120-14-527-6469
Seal Inserter

145276469
888-483-000-1: RNCC: 3 | RNVC: 2

7 Nov 2001

Load More Results