What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.

A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Blacksmith's Punch?

A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Mechanical Finger?

A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.

A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Screwdriver And Wrench Assembly?

A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Stakeholder Bench Plate?

A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.

What is a Drill Drift?

A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.

A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Digging Bar?

A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

What is a Valve Spring Lifter?

A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.

What is a Fuse Puller?

A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.

Hand Tools, Nonedged, Nonpowered - France (FR)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by France (FR) - NCB is 14

Page 22 of 110

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by France

51	20	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - France (FR)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 16 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Pipe Vise? 19 Items: A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.
What is a Hand Vise? 25 Items: A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.
What is a Hand Hydraulic Jack? 133 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 153 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 903 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 17 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
Swage,Bottom,Blacksmith's 10 Items
What is a Hand Tube Flaring Tool? 23 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Blacksmith's Punch? 12 Items: A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.
What is a Drain Plug Wrench? 45 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 57 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 16 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 3829 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
Flatter,Blacksmith's 18 Items
Swage,Top,Blacksmith's 12 Items
What is a Pipe Wrench? 110 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 149 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 53 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
Screwdriver,Offset 54 Items
What is a Screwdriver Bit? 707 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Mechanical Finger? 25 Items: A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.
What is a Socket Wrench Socket? 1803 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 1412 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 1641 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 52 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 565 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
Jack,Push-Pull,Screw 30 Items
What is a Hand Tube Bender? 54 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 1106 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 55 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pinch Bar? 19 Items: A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.
What is a Pry Bar? 17 Items: A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.
What is a Wrecking Bar? 15 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 273 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 413 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 32 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 295 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
Face,Hammer,Inserted 25 Items
What is a Hole Sheet Metal Holder? 37 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Screwdriver And Wrench Assembly? 11 Items: A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.
What is a Hand Rivet Set? 121 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Stakeholder Bench Plate? 22 Items: A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.
What is a Drill Drift? 32 Items: A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.
What is a Tack Claw? 15 Items: A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.
Mattock 28 Items
What is a Socket Wrench Handle Bar? 108 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Stake,Sheet Metalworking 50 Items
Riveter,Blind,Hand 76 Items
What is a Hand Shovel? 43 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 98 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 30 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
What is a Digging Bar? 20 Items: A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.
Block,Dolly,Sheet Metalworking 56 Items
What is a Piston Ring Compressor? 34 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Valve Spring Lifter? 29 Items: A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.
What is a Fuse Puller? 20 Items: A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.
What is a Hand Lead Seal Press? 18 Items: A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.
What is a Hand Beading Tool? 91 Items: A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.
What is a Hand Hammer? 502 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
Head,Hand Hammer 81 Items
What is a Lamp Extractor? 76 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Tube Packing Ring Installing Tool? 29 Items: A Tube Packing Ring Installing Tool (INSTALLING TOOL,TUBE PACKING RING) is an item designed to insert packing rings on tubes within tube sheets on condensers and similar heat exchangers. In operation, the packing rings are assembled on the loading pin mandrel and are then transferred from the mandrel on to the tube by means of a tubular sleeve which slides on the mandrel.
What is a Carpenters' Pincers? 18 Items: A Carpenters' Pincers (PINCERS,CARPENTERS') is a plierlike hand tool having two opposing jaws which may have hammerlike backs. One handle has a nail or tack pulling claw, the other is shaped to form a screwdriver. The tool may contain a wire cutter. See also NIPPERS, END CUTTING and PINCERS, FARRIERS'.
What is a Trowel? 33 Items: A Trowel is a tool used for bricklaying, concrete work, plastering, linoleum laying, and masonry work. Excludes CORNER TOOL, CONCRETE.
What is a Hand Abrasive Wheel Dresser? 12 Items: A Hand Abrasive Wheel Dresser (DRESSER,ABRASIVE WHEEL,HAND) is a tool designed to remove glaze from, dress, shape, sharpen, and true solid abrasive wheels. Excludes NIB, DIAMOND, WHEEL DRESSING.
What is a Lamp Cap Extractor? 32 Items: A Lamp Cap Extractor (EXTRACTOR,LAMP CAP) is a tool specifically designed to facilitate the removal of lamp caps from switchboards, panels or indicator lamps.
What is a Rivet Bucking Bar? 51 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 86 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 277 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Woven Cable Grip? 23 Items: A Woven Cable Grip (GRIP,CABLE,WOVEN) is a braided wire device designed to clutch a bare or insulated conductor, cable or wire rope, for holding taut or drawing through conduit.
What is a Screw Thread Insert Extractor? 19 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is an Electron Tube Extractor? 18 Items: An Electron Tube Extractor (EXTRACTOR,ELECTRON TUBE) is a hand tool designed to facilitate the removal of electron tubes from electronic equipment and to avoid burning the fingers. It may be used for installing tubes.
What is a Cross Tip Screwdriver? 362 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 21 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 11 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 37 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Tool Handle Wedge? 10 Items: A Tool Handle Wedge (WEDGE,TOOL HANDLE) is excludes WEDGE, WOOD.
What is a Marlinespike? 16 Items: A Marlinespike is a metal hand tool made in the shape of a tapered pin. One end is pointed and the opposite end may be headed. The body may contain an eye for a lanyard sling, or be grooved lengthwise. Excludes CABLE PICK and FID.
What is an Aligning Punch? 272 Items: An Aligning Punch (PUNCH,ALIGNING) is a round, square, hexagonal or octagonal bodied hand tool, having a round tapered section 6-1/2 inches (165.1 mm) or more in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, DRIFT and DRIFTPIN.
What is a Drift Punch? 25 Items: A Drift Punch (PUNCH,DRIFT) is a round, square, hexagonal, or octagonal bodied hand tool, having a round tapered section 4 to 6 inches (101.6 mm to 152.4 mm) inclusive in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, ALIGNING; and DRIFTPIN.
What is a Putty Knife? 36 Items: A Putty Knife (KNIFE,PUTTY) is a hand tool with a nonedged blade fixed to a handle for laying on and smoothing putty and the like.
What is a Socket Wrench Adapter-Extension? 40 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 30 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 184 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Socket Wrench Ratchet Attachment? 47 Items: A Socket Wrench Ratchet Attachment (RATCHET ATTACHMENT,SOCKET WRENCH) is a connection for socket wrenches and handles. Consists of a ratcheting mechanism with an internal drive on one end and an external drive on the opposite end of the same size. The item is designed to permit continuous rotation of the socket in one direction without removing the socket or handle and without a complete rotation of the handle.
What is a Wrench Extension Handle? 81 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Socket Wrench Crowfoot Attachment? 155 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 33 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 43 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 48 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 2394 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 372 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 300 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 661 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 32 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand-Operated Grommet And Eyelet Press? 12 Items: A Hand-Operated Grommet And Eyelet Press (PRESS,GROMMET AND EYELET,HAND-OPERATED) is a device which punches or pierces holes and in addition fastens or sets eyelets and grommets in cloth, paper and similar material. May be used for fastening or setting rivets, lacing hooks and snaps in cloth, paper and similar material. It is hand operated by lever or screw action. See also PUNCH, EYELET, PLIER TYPE and PRESS, GROMMET AND EYELET, FOOT OPERATED.
What is a Claw Bar? 19 Items: A Claw Bar (BAR,CLAW) is before using, refer to Reference Drawing Group AG.
What is a Shock Type Wheel Stud Nut Wrench? 11 Items: A Shock Type Wheel Stud Nut Wrench (WRENCH,WHEEL STUD NUT,SHOCK TYPE) is a manually operated item designed to remove wheel stud nuts. In operation the inner nut is turned by a socket attached to a shaft on which is a loose swinging weighted handle. The weighted handle may be swung quickly to provide an impact force against the socket to loosen the seized or jammed nuts. The outer nut is held stationary by a separate hexagonal holding wrench.
What is a Drift Pin Set? 30 Items: A Drift Pin Set is a group of DRIFTPIN having different characteristics.
What is a Tire Iron? 25 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 115 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Blacksmith's Vise? 14 Items: A Blacksmith's Vise (VISE,BLACKSMITH'S) is a clamping device consisting of a mounting plate, one stationary and one manual screw actuated jaw and a supporting member extending downward from the stationary jaw to the floor. Designed to be mounted on a bench, table or the like. May include pipe holding jaws.
What is a Machinist's Vise? 64 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Clamp Base Bench Vise? 10 Items: A Clamp Base Bench Vise (VISE,BENCH,CLAMP BASE) is a clamping device consisting of a base, one stationary and one manual screw actuated jaw, and one or more guide bars or rods. Designed with an integral clamp for attaching to a bench, table, or the like. Does not include pipe holding jaws.
What is a Fixed Open End Wrench Set? 86 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Nail Set? 11 Items: A Nail Set is a round knurled, square, hexagonal or octagonal bodied hand tool having a round tapered section terminating in a cupped point. It is designed to set brad head nails below the surface by striking it a hammerlike blow. See also PUNCH, DRIVE PIN.
What is a Socket Wrench Set? 202 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is an Open End Box Wrench Set? 10 Items: An Open End Box Wrench Set (WRENCH SET,OPEN END BOX) is a group of WRENCH, OPEN END BOX having different characteristics.
What is a Combination Box And Open End Wrench Set? 72 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Box Wrench Set? 36 Items: A Box Wrench Set (WRENCH SET,BOX) is a group of box wrenches having different characteristics. It may include a HANDLE, EXTENSION WRENCH. See also WRENCH SET, COMBINATION, BOX AND OPEN END.
What is a Hot Line Stick? 26 Items: A Hot Line Stick is a hand tool consisting of a straight, round stick (pole) made of a suitable nonconductive material with a tool fixed to one end. The other end may be plain or have a butt mounting device fixed to it. Various types of attachments (hooks, rings, and bands) may be fixed to the body. It is designed for use in the repair and maintenance of live high voltage aerial lines. Excludes hot line sticks without heads.
Handle,Mattock-Pick 15 Items
What is a Wrench Kit? 73 Items: A Wrench Kit is an assortment of various types and sizes of wrenches such as SOCKET, SOCKET WRENCH; WRENCH, OPEN END, FIXED; WRENCH, BOX and the like. It may include adapter(s), ratchet(s) and the like. See also WRENCH SET (as modified.
What is a Brad Awl? 15 Items: A Brad Awl (AWL,BRAD) is a small, pointed tool used by shoemakers, saddlers, cabinetmakers, and the like for piercing small holes in wood, leather, and similar materials, and consists of a handle with a ferrule and a blade. The blade is round, terminating in a beveled, sharp straight edge and has a shank which passes through the center of the handle.
What is a Scratch Awl? 20 Items: A Scratch Awl (AWL,SCRATCH) is an item whose nominal length of blade is less than 4 inches (101.6 millimeters) and is provided with a nondetachable handle.
What is a Screw Extractor Set? 10 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 102 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
Jack,Scissors,Hand 26 Items
What is a Piston Ring Expander? 23 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
Mallet,Plastic 62 Items
Mallet,Rubber 10 Items
What is a Wood Mallet? 37 Items: A Wood Mallet (MALLET,WOOD) is excludes MALLET, CALKING; MALLET, HAWSING and MALLET, SERVING.
What is a Rack Bar Jack? 30 Items: A Rack Bar Jack (JACK,RACK BAR) is excludes JACK, BUMPER and JACK, REEL, HAND.
What is a Pneumatic Tire Valve Core Inserter And Remover? 14 Items: A Pneumatic Tire Valve Core Inserter And Remover (INSERTER AND REMOVER,PNEUMATIC TIRE VALVE CORE) is a bar of steel having a small cylindrical slotted end for removing or installing a valve core in a valve stem by a screwing motion. See also REPAIR TOOL, PNEUMATIC TIRE VALVE.
What is a Hand Tube Swaging Tool Kit? 20 Items: A Hand Tube Swaging Tool Kit (SWAGING TOOL KIT,TUBE,HAND) is a hand-operated noncutting tool consisting of one or more PUNCH, TUBE SWAGING, HAND and a tube flaring bar.
What is a Hand Tube Flaring Punch? 11 Items: A Hand Tube Flaring Punch (PUNCH,TUBE FLARING,HAND) is a noncutting tool having a shaped end or section designed to flare the ends of tubes. One type is designed to flare the ends of tubes against a tube sheet, and another to flare tube ends to mate with tube fittings. Includes punch components of FLARING TOOL, TUBE, HAND.
What is a Hose Strap Band Clamping Tool? 26 Items: A Hose Strap Band Clamping Tool (CLAMPING TOOL,STRAP BAND,HOSE) is an item designed to tension and lock metal straps around a rubber hose, and the like. It is also used to clamp and hold fittings therein.
What is a Mechanical Puller? 3073 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 470 Items
What is a Slip Joint Pliers? 84 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Brake Repair Pliers? 14 Items: A Brake Repair Pliers (PLIERS,BRAKE REPAIR) is a tool having jaws designed for use in brake repair operations, such as removing and replacing items such as keys, springs, and the like. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 226 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 12 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 81 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 56 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 15 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 11 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 29 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Cross Tip Screwdriver Set? 14 Items: A Cross Tip Screwdriver Set (SCREWDRIVER SET,CROSS TIP) is a group of SCREWDRIVER, CROSS TIP having different characteristics.
What is a Spanner Wrench Set? 18 Items: A Spanner Wrench Set (WRENCH SET,SPANNER) is a group of items under WRENCH, SPANNER having different characteristics.
What is a Drive Pin Punch Set? 31 Items: A Drive Pin Punch Set (PUNCH SET,DRIVE PIN) is a group of PUNCH, DRIVE PIN having different characteristics.
What is an Aligning Punch Set? 13 Items: An Aligning Punch Set (PUNCH SET,ALIGNING) is a group of PUNCH, ALIGNING having different characteristics. See also DRIFTPIN SET.
What is a Slugging Type Box Wrench Socket? 16 Items: A Slugging Type Box Wrench Socket (SOCKET,SLUGGING TYPE BOX WRENCH) is an item having a hexagonal external drive at one end, made to fit into the internal hexagonal or 12-point opening of a slugging type box wrench. The opposite end has a single-broached hexagonal opening of the same size as the external drive. The item is designed with extra thick walls to withstand the impact of sledge blows on the driving wrench.
What is a Mechanical Puller Step Plate? 44 Items: A Mechanical Puller Step Plate (STEP PLATE,MECHANICAL PULLER) is a circular disk, flanged to provide a shoulder, and designed to provide a base for the screw point of a PULLER, MECHANICAL when pulling externally mounted bearings, gears, and the like from hollow shafts or housings. It has a concentric, countersunk hole to accommodate the puller screw point.
What is a Solid Center Punch? 79 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Cable Type Ratchet Lever Puller? 20 Items: A Cable Type Ratchet Lever Puller (PULLER,RATCHET LEVER,CABLE TYPE) is an item consisting of a metal frame and ratchet lever reel to which is attached one end of a flexible cable (wire rope). The cable feeds through the fast eye in the metal frame, and may be reeved through a slip hook tackle hook. See also BINDER, LOAD; HOIST, WIRE ROPE and STRETCHER, WIRE.
What is an Electronic Equipment Tuning Wand? 18 Items: An Electronic Equipment Tuning Wand (TUNING WAND,ELECTRONIC EQUIPMENT) is a hand-held rod used in determining the adjustment of the windings of a radio frequency coil. It is made of insulating material with iron on one end and brass on the other end. By inserting the iron end in the coil, the inductance is increased and by inserting the brass end, the inductance is decreased.
What is a Combination Open End And Spanner Wrench? 14 Items: A Combination Open End And Spanner Wrench (WRENCH,OPEN END AND SPANNER,COMBINATION) is a tool having open end wrench characteristics at one end and spanner wrench features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s) at the other end.
What is a Detent Handling Tool? 187 Items: A Detent Handling Tool (HANDLING TOOL,DETENT) is a specially designed handling tool consisting of a rigid bar with a T-handle on one end. The other end is equipped with threads designed to mate the threads of a detent to facilitate inserting or extracting.
What is a Hand Material Handling Hook? 23 Items: A Hand Material Handling Hook (HOOK,MATERIAL HANDLING,HAND) is a hook whose curved end conforms to Style AP1, AP2, AP3 or AP4 of Reference Drawing Group AP. Excludes HOOK, MANHOLE COVER, HAND; HOOK, WIRE BREAKING, HAND; HOOK, ROCK CRUSHER FEEDING, HAND; HOOK, STRAINER REMOVING, HAND and HOOKS, BAG HANDLING, HAND.
What is a Magnetic Retrieving Tool? 11 Items: A Magnetic Retrieving Tool (RETRIEVING TOOL,MAGNETIC) is a hand-operated magnetic device used to locate and pick up metallic articles, such as bolts, nuts, pins, washers, and the like, in confined spaces. It may be rigid, flexible or adjustable. Excludes FINGER, MECHANICAL.
What is a Mechanical Puller Adapter? 78 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Combination Box And Open End Box Wrench? 13 Items: A Combination Box And Open End Box Wrench (WRENCH,BOX AND OPEN END BOX,COMBINATION) is a double end wrench, box and open end box, primarily designed for removing or replacing tube fittings. The opening in the open end box may be machined at an angle from the longitudinal center line of the wrench.
What is a Screw Thread Insert Inserter? 136 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Flat Tip Screwdriver Set? 48 Items: A Flat Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP) is a group of SCREWDRIVER, FLAT TIP having different characteristics.
What is a Terminal Crimping Tool Contact Positioner? 89 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 16 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is an Adjustable Wrench? 138 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 239 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 75 Items
Handle,Shovel 10 Items
What is a Socket Wrench Spanner Attachment? 88 Items: A Socket Wrench Spanner Attachment (SPANNER ATTACHMENT,SOCKET WRENCH) is an item having an adjustable or fixed span with pin, hook, or key type end that is used to fit and turn various size retaining rings, cover plates, plugs, couplings, and like parts. Usually designed to be driven by a male driver.
What is a Retaining Ring Installation Tool? 44 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Tacker? 16 Items: A Tacker is a hand-operated, hammerlike or gunlike item without a clincher, used to drive preformed connecting elements like pins, nails or staples through one object or piece of material into another. Excludes STAPLER (as modified).
What is a Bearing And Bushing Inserter? 290 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 207 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 939 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 14 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 93 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 161 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 94 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 141 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 53 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Six Point Tip Screwdriver? 155 Items: A Six Point Tip Screwdriver (SCREWDRIVER,SIX POINT TIP) is a manual screwdriver having a single nonremoveable blade having a tip with six rounded points.
What is a Seal Inserter And Remover? 147 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 478 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is a Preformed Packing Inserter And Remover? 34 Items: A Preformed Packing Inserter And Remover (INSERTER AND REMOVER,PREFORMED PACKING) is a hand tool designed to install and remove a PACKING, PREFORMED.
What is a Pin Remover? 34 Items: A Pin Remover (REMOVER,PIN) is a hand tool designed to facilitate the removal of a pin from a hole.
What is a Pin Inserter And Remover? 13 Items: A Pin Inserter And Remover (INSERTER AND REMOVER,PIN) is a rodlike tool designed to facilitate the insertion and removal of a pin from a hole.
What is an Electrical Contact Inserter And Remover? 37 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Piston Inserter? 40 Items: A Piston Inserter (INSERTER,PISTON) is a tool designed to permit installation of a piston or piston assembly without damaging the packings or piston.
What is a Spring Inserter And Remover? 85 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 13 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Stud Inserter? 22 Items: A Stud Inserter (INSERTER,STUD) is a device designed to drive in studs. It does not have any facilities for removing or extracting studs. See also INSERTER AND REMOVER, STUD.
What is a Stud Inserter And Remover? 17 Items: A Stud Inserter And Remover (INSERTER AND REMOVER,STUD) is a group of items designed to extract and to drive studs. It may include collets, guides, housings, holders and the like. See also REMOVER SET, STUD and INSERTER, STUD.
What is a Gear Inserter? 54 Items: A Gear Inserter (INSERTER,GEAR) is a hand tool designed to install various gears onto a gearshaft. It may be operated by a pushing or a striking force.
What is a Crimping Tool Die? 73 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is an Electrical Connector Inserter? 45 Items: An Electrical Connector Inserter (INSERTER,ELECTRICAL CONNECTOR) is a hand tool designed to hold an electrical connector, and to assist in the positioning and installation of the connector on a cover, panel or the like.
What is a Float? 12 Items: A Float is a tool used for concrete, plastering and grouting work.
What is a Mechanical Puller Set? 19 Items: A Mechanical Puller Set (PULLER SET,MECHANICAL) is two or more separate PULLER, MECHANICAL of different fixed sizes.
What is a Lifting Pneumatic Bag? 11 Items: A Lifting Pneumatic Bag (PNEUMATIC BAG,LIFTING) is a device made of flexible material designed to lift another item by being placed under the item and being inflated with air or some other gas. It will have a means of being connected to an air or gas source and may include a connector hose, a control valve and/or a pressure regulator.
What is a Cable Tie Installation Tool? 22 Items: A Cable Tie Installation Tool (INSTALLATION TOOL,CABLE TIE) is a lightweight, hand-held, hand-operated tool designed to fasten cable ties, straps and the like. Cable tie is inserted into the nose of the tool flush to the cable tie head. Trigger handle tightens cable tie and cuts off any excess. These installation tools are available in a variety of sizes depending on their intended use with miniature, intermediate, standard, heavy or extra heavy cross section ties.
What is a Bearing Staking Installation Tool? 159 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
Wrench Set,Ratchet 15 Items
What is a Sealant Dispenser? 26 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Retaining Ring Pliers Set? 10 Items: A Retaining Ring Pliers Set (PLIERS SET,RETAINING RING) is a group of PLIERS, RETAINING RING having different characteristics.
What is a Hand Armament Subsystem Carrier? 52 Items: A Hand Armament Subsystem Carrier (CARRIER,ARMAMENT SUBSYSTEM,HAND) is a metallic item with a clamp device and/or space for depositing articles. It is used for transporting weapon parts during maintanence and/or repair work, such as gun barrel, automatic loader, breechblock and the like.
What is a Ring Retaining Pliers Tip Set? 13 Items: A Ring Retaining Pliers Tip Set (TIP SET,PLIERS,RING RETAINING) is a collection of removable metallic tips in matched pairs used to provide various size capablities to PLIERS, RING RETAINING which permits the removal and installation of internal and external retaining rings.
What is a Plug Electrical Connector Extractor? 45 Items: A Plug Electrical Connector Extractor (EXTRACTOR,ELECTRICAL CONNECTOR,PLUG) is a hand tool designed to disassemble CONNECTOR, PLUG, ELECTRICAL from a CONNECTOR, RECEPTACLE, ELECTRICAL.
What is a Torque Wrench Adapter Set? 10 Items: A Torque Wrench Adapter Set (ADAPTER SET,TORQUE WRENCH) is tWO or more ADAPTER, TORQUE WRENCH of different sizes.
What is an Electronic Component Inserter And Remover? 79 Items: An Electronic Component Inserter And Remover (INSERTER AND REMOVER,ELECTRONIC COMPONENT) is an item which can insert or remove an electronic component package such as MICROCIRCUIT; RESISTOR, NETWORK (as modified); and the like from its mounting position or socket. Excludes INSERTER AND REMOVER, ELECTRICAL CONTACT; REMOVER, ELECTRICAL CONTACT; EXTRACTOR, ELECTRICAL CARD; EXTRACTOR, ELECTRONIC CRYSTAL UNIT; EXTRACTOR, ELECTRON TUBE.
What is an Impact Type Bit Set And Handle Screwdriver? 14 Items: An Impact Type Bit Set And Handle Screwdriver (SCREWDRIVER,BIT SET AND HANDLE,IMPACT TYPE) is an item consisting of a set of screwdriver bits and a impact driver to accommodate the bits of various types and characteristics. It is designed to transmit a strong rotating movement by the impact of a hammer blowed on the impact driver. It is used to loosen rusted or seized screws. Excludes SCREWDRIVER, BIT SET AND HANDLE.
What is a Hand Vise Jaw? 19 Items: A Hand Vise Jaw (JAW,VISE,HAND) is an item consisting of two opposing parts of a VISE, HAND. The item is moveable and able to open and close. It can hold, grasp or clamp work.
What is a Screwdriver Handle? 28 Items: A Screwdriver Handle (HANDLE,SCREWDRIVER) is an item used to accommodate various types of BIT, SCREWDRIVER. It is designed to rotate a bit that is used for installing or removing screws.
What is a Wire Twister Pliers? 25 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 284 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is a Mechanical Puller Body? 45 Items: A Mechanical Puller Body (BODY,PULLER,MECHANICAL) is an item designed to support and enclose the internal parts of a PULLER,MECHANICAL.
What is a Flat Tip And Cross Tip Screwdriver Set? 39 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is a Socket Wrench Screwdriver Attachment Set? 22 Items: A Socket Wrench Screwdriver Attachment Set (SCREWDRIVER ATTACHMENT SET,SOCKET WRENCH) is a set of screwdriver attachment, socket wrench of different sizes. Items consist of a female square drive on one end to attach to a handle, socket wrench and various screwdriver tip configurations on the opposite end. Excludes SCREWDRIVER ATTACHMENT,SOCKET WRENCH
What is an Oil Filter Wrench? 44 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 430 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Communications Equipment Spring Adjuster? 13 Items: A Communications Equipment Spring Adjuster (ADJUSTER,SPRING,COMMUNICATIONS EQUIPMENT) is a single or double end tool, equipped with slot(s) of various dimensions or with cylindrical rod(s), used for adjusting the springs or spring tensioned parts of electronic equipment.
What is a Rotating Members Aligning Tool? 32 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
What is a Final Drive Assembly Alignment Pin? 41 Items: A Final Drive Assembly Alignment Pin (ALIGNMENT PIN,FINAL DRIVE ASSEMBLY) is a special designed pin used in the assembling of the final drive.
Arm,Handling Tool 77 Items
What is a Splicing Sleeve Compressing Tool? 23 Items: A Splicing Sleeve Compressing Tool (COMPRESSING TOOL,SPLICING SLEEVE) is a hand tool having hinged leverage handles similar to a CUTTER, BOLT or pliers, designed to compress a splicing sleeve when joining the ends of two conductors, or when forming an eye splice in the end of a wire rope. Excludes CRIMPING TOOL, TERMINAL, HAND.
What is a Hand Screw Jack Extension? 14 Items: A Hand Screw Jack Extension (EXTENSION,HAND SCREW JACK) is a length of externally threaded rigid shafting which is the adjustable section of a JACK, SCREW, HAND.
What is a Mechanical Puller Gear Adapter? 21 Items: A Mechanical Puller Gear Adapter (GEAR ADAPTER,PULLER,MECHANICAL) is an adapter that adapts a PULLER,MECHANICAL, to pull a certain gear.
Handle,Hydraulic Jack 18 Items
What is a Female Electrical Contact Resizing Tool? 11 Items: A Female Electrical Contact Resizing Tool (RESIZING TOOL,FEMALE ELECTRICAL CONTACT) is a tool designed to shape to a specific size, female contacts such as those used on electrical connectors, tube sockets, crystal sockets, and pin jacks.
What is a Screwdriver And Socket Wrench Combination? 13 Items: A Screwdriver And Socket Wrench Combination is a hand-tool formed into an integral unit with a socket wrench at one end and a screwdriver bit at the other end. See also SCREWDRIVER AND WRENCH ASSEMBLY.
What is a Hand Hose Fitting Swaging Tool Kit? 11 Items: A Hand Hose Fitting Swaging Tool Kit (SWAGING TOOL KIT,HOSE FITTING,HAND) is a device, hydraulically actuated by hand or power operated pump, consisting of face plate, adapter plate, finger cages, fingers, ram, bushing, and expanding mandrels combined on a single base in various functional arrangements. It is used for swaging the outside diameter of hose assembly fittings, expanding the inside diameter of hose assemblies, and securing the fabrication of hose assemblies. Included are a hand or power operated pump, lubricant, cases, and trays.
What is a Catch Lever Tool? 12 Items: A Catch Lever Tool (LEVER TOOL,CATCH) is a specially designed hand tool which engages the opening and closing lever of a CATCH (as modified) for ease of operation. It is constructed of thin rigid material, usually flat, and one end has an engaging tongue.
What is a Manual Impact Wrench? 11 Items: A Manual Impact Wrench (WRENCH,IMPACT,MANUAL) is a manually operated handheld tool consisting of spring-loaded handle and a power-impact head which delivers a torsional impact from either continuous movement of the handle in one direction, or by a reciprocating action. It is used in tightening and loosening fasteners, such as bolts, nuts, and the like. The item may include sockets, extensions and offset fittings, nut runners, and the like.
What is a Drift? 63 Items: A Drift is an item consisting of a tubular body fitted with replaceable tips. It is designed to insert or remove mechanical components where space is restricted.
What is a Nutdriver? 46 Items: A Nutdriver is a non-powered hand tool with a screwdriver style handle, shaft and formed female hex or square socket at driving end.
What is a Locking Device Removal Tool? 12 Items: A Locking Device Removal Tool (REMOVAL TOOL,LOCKING DEVICE) is a hand tool designed to facilitate the removal of a WASHER, KEY and a LOCKING PLATE, NUT AND BOLT.
What is a Hydraulic Fitting Crimping Tool Head? 26 Items: A Hydraulic Fitting Crimping Tool Head (HEAD,CRIMPING TOOL,HYDRAULIC FITTING) is a component of a crimping tool used to compress fittings on fluid tubes. It consists of a U-shape item, in which, are mounted different sizes of DIE, CRIMPING TOOL for tubes of various diameters.
What is a Torque Screwdriver? 11 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.
What is a Special Purpose Combination Wrench? 13 Items: A Special Purpose Combination Wrench (WRENCH,COMBINATION,SPECIAL PURPOSE) is a tool having a combination of ends and facets. The ends may have open end, box or spanner characteristics. The sides may have features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s). Designed to fit specific items, not sized as standard or metric.
What is a Screwdriver Bit Holder? 56 Items: A Screwdriver Bit Holder (HOLDER,SCREWDRIVER BIT) is an attachment with a socket end for accepting male hexagon shank insert bits and a drive end for adapting to a portable power or hand tool.
What is a Telescoping Pole? 16 Items: A Telescoping Pole (POLE,TELESCOPING) is an item which is designed to be extended or compressed by the sliding of overlapping sections. This item may or may not be able to accommodate an extension.

Stock Items From Supply Class 5120 Page 22 of 110

5120-14-323-4444
Hand Hydraulic Jack

143234444
P4155: RNCC: 3 | RNVC: 2
AP4155: RNCC: 5 | RNVC: 2
EXRVS08-05-103: RNCC: 6 | RNVC: 9

1 Jan 1975

5120-14-302-4886
Driftpin

143024886
319A94-82-005: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-358-3650
Hand Hammer

143583650
958-25: RNCC: 3 | RNVC: 9

13 Aug 1979

5120-14-215-1349
Mechanical Puller

142151349
3130S95-12-026: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-476-1960
Electronics Pliers

144761960
809-731: RNCC: 3 | RNVC: 2
809 731: RNCC: 5 | RNVC: 2
F300 0T 016 9622: RNCC: 5 | RNVC: 9

24 May 1995

5120-14-401-4074
Mechanical Puller

144014074
355A93-3242-00: RNCC: 3 | RNVC: 2

5 Jun 1985

5120-14-443-1738
Ratchet Wrench

144431738
7-014911-2A: RNCC: 3 | RNVC: 2
7-014911-2A: RNCC: 5 | RNVC: 9

12 Nov 1990

5120-14-265-4557
C Clamp

142654557
13-2BIS40: RNCC: 2 | RNVC: 2

1 Jan 1970

5120-14-040-7348
Socket Wrench Set

140407348
000136003S: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-336-3215
Hand Hydraulic Jack

143363215
3501060: RNCC: 3 | RNVC: 2

15 Oct 1992

5120-14-313-1277
Lamp Cap Extractor

143131277
713720003: RNCC: 3 | RNVC: 2
34EF: RNCC: 5 | RNVC: 2
34EF: RNCC: 5 | RNVC: 2
91432220: RNCC: 5 | RNVC: 2
713720003: RNCC: 5 | RNVC: 2
441125001: RNCC: 5 | RNVC: 2

1 Jan 1974

5120-14-354-8669
Box Wrench

143548669
207619: RNCC: 3 | RNVC: 2

20 Feb 1979

5120-14-543-5248
Mechanical Puller

145435248
8056559L00: RNCC: 3 | RNVC: 2

17 Nov 2004

5120-14-252-1402
Socket Wrench

142521402
408808: RNCC: 3 | RNVC: 2
SBM153-3: RNCC: 3 | RNVC: 2
040724: RNCC: 5 | RNVC: 2
40724: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-341-3180
Mechanical Puller

143413180
055W02-519834R: RNCC: 3 | RNVC: 2
7M147G: RNCC: 3 | RNVC: 2
0519834R00: RNCC: 5 | RNVC: 2

16 Mar 1977

5120-14-408-9621
Mechanical Puller

144089621
853-201-117-0: RNCC: 3 | RNVC: 2

9 Apr 1986

5120-14-466-2554
Seal Inserter

144662554
0XB101-718-700-04: RNCC: 3 | RNVC: 2

3 Nov 1993

5120-14-540-0163
Rivet Bucking Bar

145400163
VHP500-102-7: RNCC: 3 | RNVC: 2
VHP500-102-7: RNCC: 5 | RNVC: 2
VHP500-102-7: RNCC: 5 | RNVC: 9

25 Feb 2004

5120-14-453-4898
Socket Wrench

144534898
4624837: RNCC: 3 | RNVC: 2
92E3364: RNCC: 5 | RNVC: 2

24 Feb 1992

5120-14-319-0121
Mechanical Puller

143190121
7M705: RNCC: 3 | RNVC: 2
MS1427: RNCC: 5 | RNVC: 2
06C56: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-549-5806
Tacker

145495806
40107314: RNCC: 3 | RNVC: 2
01.26.85.75: RNCC: 5 | RNVC: 2
MS640: RNCC: 5 | RNVC: 2

19 Apr 2006

5120-14-544-3716
Hand Hammer

145443716
1SH41722221: RNCC: 3 | RNVC: 2

25 Jan 2005

5120-14-448-9902
Box Wrench

144489902
BAZ639196: RNCC: 3 | RNVC: 2

24 Jul 1991

5120-14-300-9720
Mechanical Puller

143009720
341A98-2009-00: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-325-0257
Mechanical Puller

143250257
0S21544A: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-372-6534
Plier Wrench

143726534
516: RNCC: 3 | RNVC: 2
516: RNCC: 5 | RNVC: 2
3148511820001: RNCC: 5 | RNVC: 2
0182000: RNCC: 5 | RNVC: 9

21 Sep 1981

5120-14-481-8897
Mechanical Puller

144818897
10543461: RNCC: 3 | RNVC: 2
10319339: RNCC: 5 | RNVC: 2

6 Jun 1996

5120-14-290-4059
Mechanical Puller

142904059
5000260074: RNCC: 3 | RNVC: 2
5000260074: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-481-8937
Socket Wrench

144818937
HSS831AHB226: RNCC: 3 | RNVC: 2
89167017: RNCC: 5 | RNVC: 2

6 Jun 1996

5120-14-427-3467
Plier Clamp

144273467
509: RNCC: 3 | RNVC: 2
3148511813805: RNCC: 5 | RNVC: 2
91626663: RNCC: 5 | RNVC: 2
163-0084: RNCC: 5 | RNVC: 2
0181380: RNCC: 5 | RNVC: 9
FACOM509: RNCC: 5 | RNVC: 9

13 Oct 1988

5120-14-423-2569
Seal Inserter

144232569
3160S95-12-495: RNCC: 3 | RNVC: 2

14 Apr 1988

5120-14-329-9519
Box Wrench

143299519
50.120: RNCC: 3 | RNVC: 2
3148511074602: RNCC: 5 | RNVC: 2
50-120: RNCC: 5 | RNVC: 2
0107460: RNCC: 5 | RNVC: 9

2 Jul 1975

5120-14-338-9003
Mechanical Puller

143389003
8811613000: RNCC: 3 | RNVC: 2

17 Dec 1976

5120-14-353-9391
Stud Inserter

143539391
02640903800: RNCC: 3 | RNVC: 2
026409038: RNCC: 5 | RNVC: 2

16 Jan 1979

5120-14-370-4280
Mechanical Puller

143704280
DLP751660: RNCC: 3 | RNVC: 2

18 May 1981

5120-14-259-3281
Mechanical Puller

142593281
253-5M361A2B: RNCC: 3 | RNVC: 2
RU253-5M361A2B: RNCC: 5 | RNVC: 2

1 Jan 1969

5120-14-441-2165
Aligning Punch

144412165
332A94-2701-10: RNCC: 3 | RNVC: 2

22 Aug 1990

5120-14-301-0955
Mechanical Puller

143010955
330A93-3106-01: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-436-1031
Piston Inserter

144361031
716392: RNCC: 3 | RNVC: 2

5 Dec 1989

5120-14-471-0981
Mechanical Puller

144710981
M4DZ7101952320: RNCC: 3 | RNVC: 2

27 Jul 1994

5120-14-291-8009
Box Wrench

142918009
02640040800: RNCC: 3 | RNVC: 2
026400408: RNCC: 5 | RNVC: 2
204870: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-350-2599
Mechanical Puller

143502599
E248E177: RNCC: 3 | RNVC: 2

14 Jun 1978

5120-14-512-6185
Wood Mallet

145126185
2440: RNCC: 3 | RNVC: 9

17 Feb 1999

5120-14-365-0203
Pipe Wrench

143650203
0106130: RNCC: 3 | RNVC: 2
VIR0106130: RNCC: 5 | RNVC: 9

2 Sep 1980

5120-14-432-1221
Box Wrench

144321221
853-190-026-0: RNCC: 3 | RNVC: 2

24 May 1989

5120-14-528-0650
Seal Inserter

145280650
888-512-900-1: RNCC: 3 | RNVC: 2

12 Dec 2001

5120-14-298-4772
Box Wrench

142984772
57-10X11: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-542-4939
Hand Tube Bender

145424939
2511-010: RNCC: 3 | RNVC: 2
2511-23: RNCC: 5 | RNVC: 2
XX074007: RNCC: 6 | RNVC: 9

21 Jul 2004

5120-14-321-0806
Box Wrench

143210806
50.91: RNCC: 3 | RNVC: 2
3148511071700: RNCC: 5 | RNVC: 2
50-91: RNCC: 5 | RNVC: 2
0107170: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-471-3607
Hand Vise

144713607
NO PRIMARY REF14-471-3607: RNCC: 3 | RNVC: 2
0225505: RNCC: 5 | RNVC: 2
1175A: RNCC: 5 | RNVC: 2
91639866: RNCC: 5 | RNVC: 2

24 Aug 1994

5120-14-306-3438
Aligning Punch

143063438
330A93-3317-20: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-031-8859
Socket Wrench

140318859
149120402: RNCC: 3 | RNVC: 2
149120402: RNCC: 5 | RNVC: 2

5 Jul 1980

5120-14-232-2497
Screw Extractor

142322497
885E1: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-451-7798
Mechanical Puller

144517798
600092: RNCC: 3 | RNVC: 2

4 Dec 1991

5120-14-455-9779
Sealant Dispenser

144559779
9501PPM: RNCC: 3 | RNVC: 2

11 Jun 1992

5120-14-543-7087
Mechanical Puller

145437087
23826287-00: RNCC: 3 | RNVC: 2

3 Dec 2004

5120-14-373-1175
Hand Tube Bender

143731175
S102: RNCC: 3 | RNVC: 2

21 Sep 1981

5120-14-315-1252
Mechanical Puller

143151252
MD003-10-00REP4: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-464-2461
Mechanical Puller

144642461
854-500-366-0: RNCC: 3 | RNVC: 2

28 Jul 1993

5120-14-406-5941
Box Wrench

144065941
851-912-045-0: RNCC: 3 | RNVC: 2
OXB502-003-100/15: RNCC: 5 | RNVC: 2

8 Jan 1986

5120-14-285-4783
Hand Hammer

142854783
M0B403-30EM: RNCC: 3 | RNVC: 2
M0B403-28: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-422-7449
Torque Handle

144227449
5040TDQ-P535-10: RNCC: 3 | RNVC: 2

17 Mar 1988

5120-14-389-8330
Socket Wrench

143898330
26545913000: RNCC: 3 | RNVC: 2
265459130: RNCC: 5 | RNVC: 2
265459130: RNCC: 5 | RNVC: 9

20 Dec 1983

5120-14-481-5802
Socket Wrench

144815802
0013620: RNCC: 3 | RNVC: 2
B16R6: RNCC: 5 | RNVC: 2
B.16R.6: RNCC: 5 | RNVC: 2

16 May 1996

5120-14-363-4660
Box Wrench

143634660
W3241M: RNCC: 3 | RNVC: 9

9 May 1980

5120-14-546-6658
Box Wrench

145466658
55A.18X19: RNCC: 3 | RNVC: 2
55A.18X19: RNCC: 5 | RNVC: 2

27 Jul 2005

5120-14-428-6738
Seal Inserter

144286738
853-202-806-0: RNCC: 3 | RNVC: 2

8 Dec 1988

5120-14-447-3696
Torque Wrench Set

144473696
39361207: RNCC: 3 | RNVC: 9

15 May 1991

5120-14-322-6503
Driftpin

143226503
ST151M92P12: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-387-1637
Mechanical Puller

143871637
098026: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-413-3198
Box Wrench

144133198
50.109: RNCC: 3 | RNVC: 2
3148511073506: RNCC: 5 | RNVC: 2
50-109: RNCC: 5 | RNVC: 2
0107350: RNCC: 5 | RNVC: 9

26 Nov 1986

5120-14-363-4645
Socket Wrench

143634645
72-39: RNCC: 3 | RNVC: 2
4-10-39: RNCC: 3 | RNVC: 2

9 May 1980

5120-14-441-2281
Mechanical Puller

144412281
6803G33-0040-20: RNCC: 3 | RNVC: 2

22 Aug 1990

5120-14-439-1171
Seal Inserter

144391171
853-290-137-0: RNCC: 3 | RNVC: 2

25 Apr 1990

5120-14-308-1278
Mechanical Puller

143081278
NO PRIMARY REF14-308-1278: RNCC: 3 | RNVC: 2
184575: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-459-9308
Hand Hydraulic Jack

144599308
10581-D: RNCC: 3 | RNVC: 2
260728: RNCC: 5 | RNVC: 2
98250243114: RNCC: 5 | RNVC: 2

4 Jan 1993

5120-14-527-8161
Seal Inserter

145278161
888-497-600-1: RNCC: 3 | RNVC: 2

21 Nov 2001

5120-14-304-1795
Hand Hammer

143041795
365-400 E.NX: RNCC: 3 | RNVC: 2
3896-280G: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-408-8374
Mechanical Puller

144088374
M12510: RNCC: 3 | RNVC: 2
85-692-9547: RNCC: 6 | RNVC: 9

2 Apr 1986

5120-14-294-0706
Machinist's Vise

142940706
583540000: RNCC: 3 | RNVC: 2
4219-105FIXE: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-432-1237
Aligning Punch

144321237
853-202-725-0: RNCC: 3 | RNVC: 2

24 May 1989

5120-14-244-9028
Socket Wrench

142449028
92.32: RNCC: 3 | RNVC: 2
86-32: RNCC: 3 | RNVC: 2
168-32: RNCC: 3 | RNVC: 9
92-32: RNCC: 5 | RNVC: 2
3272670291171: RNCC: 5 | RNVC: 2
0128120: RNCC: 5 | RNVC: 9
DEM168-32: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-338-3666
Box Wrench

143383666
GSM171-264F2: RNCC: 3 | RNVC: 2
A0289-003F5: RNCC: 5 | RNVC: 2

6 Nov 1976

5120-14-400-1952
Mechanical Puller

144001952
332A93-3101-20: RNCC: 3 | RNVC: 2

24 Apr 1985

5120-14-391-3116
Mechanical Puller

143913116
VFA831: RNCC: 3 | RNVC: 2

1 Mar 1984

5120-14-527-8163
Mechanical Puller

145278163
888-497-800-1: RNCC: 3 | RNVC: 2

21 Nov 2001

5120-14-250-6453
Open End Box Wrench

142506453
552-000MA316DET17: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-433-3228
Aligning Punch

144333228
853-202-855-0: RNCC: 3 | RNVC: 2

19 Jul 1989

5120-14-440-5410
Mechanical Puller

144405410
0-30878-3: RNCC: 3 | RNVC: 2
85-694-0864: RNCC: 6 | RNVC: 9

17 Jul 1990

5120-14-442-1526
Rivet Bucking Bar

144421526
853-600-259-0: RNCC: 3 | RNVC: 2

3 Oct 1990

5120-14-532-0277
Seal Inserter

145320277
888-459-200-1: RNCC: 3 | RNVC: 2
888-459-200-1: RNCC: 5 | RNVC: 2

9 Oct 2002

5120-14-321-8403
Socket Wrench

143218403
8000024804: RNCC: 3 | RNVC: 2
85-686-2834: RNCC: 6 | RNVC: 9

1 Jan 1975

5120-14-386-6861
Mechanical Puller

143866861
853-200-200-0: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-316-5581
Mechanical Puller

143165581
321A97-3220-00: RNCC: 3 | RNVC: 2
321-97-3220-00: RNCC: 5 | RNVC: 2
08-492: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-510-1363
Socket Wrench

145101363
IT243CDCMIR3-5F: RNCC: 3 | RNVC: 2
5120AA8011039: RNCC: 6 | RNVC: 9

4 Nov 1998

5120-14-450-2197
Hand Hammer

144502197
0136350301: RNCC: 3 | RNVC: 2
136-1-3500EC: RNCC: 3 | RNVC: 2
91713558: RNCC: 5 | RNVC: 2

25 Sep 1991

5120-14-522-1972
Hand Beading Tool

145221972
1629731: RNCC: 3 | RNVC: 2

10 Oct 2000

5120-14-446-0567
Seal Inserter

144460567
SV1502: RNCC: 3 | RNVC: 2
5000261502: RNCC: 5 | RNVC: 2
SV1502: RNCC: 5 | RNVC: 9

5 Mar 1991

5120-14-304-0371
Box Wrench

143040371
62-20X22: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-429-7208
Seal Inserter

144297208
853-290-057-0: RNCC: 3 | RNVC: 2

8 Feb 1989

5120-14-518-2669
Lamp Cap Extractor

145182669
IF1183-815: RNCC: 3 | RNVC: 9

1 Feb 2000

5120-14-201-6829
Hand Tube Bender

142016829
2510-8-10: RNCC: 3 | RNVC: 2
C480: RNCC: 5 | RNVC: 9

1 Jan 1962

5120-14-212-1521
Seal Inserter

142121521
549560: RNCC: 3 | RNVC: 2
85-691-2081: RNCC: 6 | RNVC: 9

5 Jul 1980

5120-14-338-9037
Seal Inserter

143389037
8812443000: RNCC: 3 | RNVC: 2

17 Dec 1976

5120-14-385-3441
Mechanical Puller

143853441
6803P32-1679-01: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-425-9581
Aligning Punch

144259581
502194ATH20R2: RNCC: 3 | RNVC: 2

28 Jul 1988

5120-14-409-6299
Mechanical Puller

144096299
46AM057A: RNCC: 3 | RNVC: 2

28 May 1986

5120-14-480-1790
Seal Inserter

144801790
151B9000-13/14: RNCC: 3 | RNVC: 2
EA2-0311: RNCC: 5 | RNVC: 2

26 Feb 1996

5120-14-285-4797
Hand Hammer

142854797
5590-18: RNCC: 3 | RNVC: 9

1 Jan 1972

5120-14-441-2252
Socket Wrench

144412252
6802M10-0022-00: RNCC: 3 | RNVC: 2

22 Aug 1990

5120-14-362-7547
Box Wrench

143627547
35AM025: RNCC: 3 | RNVC: 2
85-691-3148: RNCC: 6 | RNVC: 9

19 Mar 1980

5120-14-032-0957
Gear Inserter

140320957
341A93-3212-00: RNCC: 3 | RNVC: 2

5 Jul 1980

5120-14-307-3551
Box Wrench

143073551
57.13X15: RNCC: 3 | RNVC: 2
3148511132807: RNCC: 5 | RNVC: 2
57-13X15: RNCC: 5 | RNVC: 2
0715 23 19: RNCC: 5 | RNVC: 2
0113280: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-336-2211
Mechanical Puller

143362211
3160S95-66-000: RNCC: 3 | RNVC: 2
85-100-3218: RNCC: 6 | RNVC: 9

24 Jul 1976

5120-14-554-4028
Mechanical Puller

145544028
M20950: RNCC: 3 | RNVC: 2

2 Jul 2007

5120-14-378-5601
Mechanical Puller

143785601
360A93-3400-00: RNCC: 3 | RNVC: 2

11 Aug 1982

5120-14-468-2198
Socket Wrench

144682198
NO PRIMARY REF14-468-2198: RNCC: 3 | RNVC: 2
3148510987729: RNCC: 5 | RNVC: 2
37.13: RNCC: 5 | RNVC: 2
098772: RNCC: 5 | RNVC: 9

14 Feb 1994

5120-14-437-3574
Socket Wrench

144373574
J00650-01S140P015: RNCC: 3 | RNVC: 2

30 Jan 1990

5120-14-402-4224
Hand Hammer

144024224
NO PRIMARY REF14-402-4224: RNCC: 3 | RNVC: 2
F011E25: RNCC: 5 | RNVC: 9
79425: RNCC: 5 | RNVC: 9

3 Jul 1985

5120-14-466-0006
Seal Inserter

144660006
0XB501-213-861-03: RNCC: 3 | RNVC: 2

27 Oct 1993

5120-14-237-9807
Box Wrench Set

142379807
65JC5: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-455-5935
Hand Hammer

144555935
200A.36: RNCC: 3 | RNVC: 2
200A36: RNCC: 5 | RNVC: 2
3148511462904: RNCC: 5 | RNVC: 2
91638771: RNCC: 5 | RNVC: 2
0146290: RNCC: 5 | RNVC: 9

28 May 1992

5120-14-424-3468
Drive Pin Punch

144243468
246.8: RNCC: 3 | RNVC: 2
3148511587607: RNCC: 5 | RNVC: 2
91621077: RNCC: 5 | RNVC: 2
246-8: RNCC: 5 | RNVC: 2
0158760: RNCC: 5 | RNVC: 9

19 May 1988

5120-14-448-6395
Socket Wrench

144486395
101 100-23: RNCC: 3 | RNVC: 9
W-1908: RNCC: 3 | RNVC: 9

4 Jul 1991

5120-14-202-8605
Socket Wrench

142028605
NO PRIMARY REF14-202-8605: RNCC: 3 | RNVC: 2
SA98: RNCC: 5 | RNVC: 9

1 Jan 1963

5120-14-341-5807
Socket Wrench

143415807
NO PRIMARY REF14-341-5807: RNCC: 3 | RNVC: 2
RT7280: RNCC: 5 | RNVC: 9

16 Mar 1977

5120-14-405-6000
Socket Wrench

144056000
72-43: RNCC: 3 | RNVC: 2

4 Dec 1985

5120-14-434-7803
Seal Inserter

144347803
853-290-113-0: RNCC: 3 | RNVC: 2

4 Oct 1989

5120-14-391-2598
Plier Clamp

143912598
P8BISC: RNCC: 3 | RNVC: 9
P8BISC: RNCC: 5 | RNVC: 2

1 Mar 1984

5120-14-540-8528
Trowel

145408528
6015160101: RNCC: 3 | RNVC: 2
3303806015092: RNCC: 5 | RNVC: 2

23 Apr 2004

5120-14-208-6451
Hot Line Stick

142086451
PERCHE30000V: RNCC: 3 | RNVC: 2

1 Jan 1964

5120-14-346-8171
Box Wrench

143468171
105N9X11: RNCC: 3 | RNVC: 2

19 Jan 1978

5120-14-249-9486
Open End Box Wrench

142499486
NO PRIMARY REF14-249-9486: RNCC: 3 | RNVC: 2
42-27X30: RNCC: 5 | RNVC: 2
91355342: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-432-8494
Mechanical Puller

144328494
853-290-132-0: RNCC: 3 | RNVC: 2

28 Jun 1989

5120-14-364-1788
Mechanical Puller

143641788
16806333: RNCC: 3 | RNVC: 2
16806333: RNCC: 3 | RNVC: 9

7 Aug 1980

5120-14-405-0654
Trowel

144050654
NO PRIMARY REF14-405-0654: RNCC: 3 | RNVC: 2
765-26: RNCC: 5 | RNVC: 9

20 Nov 1985

5120-14-279-0608
Box Wrench Set

142790608
65JE12: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-442-5251
Socket Wrench

144425251
J8932-B: RNCC: 3 | RNVC: 9
J8972-B: RNCC: 5 | RNVC: 9
AEDJ8932-B: RNCC: 5 | RNVC: 9

17 Oct 1990

5120-14-236-9825
Machinist's Vise

142369825
3376MS4: RNCC: 3 | RNVC: 9

1 Jan 1967

5120-14-281-7633
Mechanical Puller

142817633
A124563: RNCC: 3 | RNVC: 2
100121: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-452-1288
Hand Beading Tool

144521288
45057771: RNCC: 3 | RNVC: 2

18 Dec 1991

5120-14-405-6160
Seal Inserter

144056160
8813130000: RNCC: 3 | RNVC: 2

4 Dec 1985

5120-14-432-6410
Hand Hydraulic Jack

144326410
C3: RNCC: 3 | RNVC: 9
5000396703: RNCC: 5 | RNVC: 2
RASC3: RNCC: 5 | RNVC: 9

19 Jun 1989

5120-14-410-0143
Seal Inserter

144100143
8813131000: RNCC: 3 | RNVC: 2

4 Jun 1986

5120-14-363-7091
Driftpin

143637091
160-888619-04: RNCC: 3 | RNVC: 2

6 Jul 1980

5120-14-462-9863
Aligning Punch

144629863
T700A5799005002: RNCC: 3 | RNVC: 2

12 May 1993

5120-14-040-7346
Drive Pin Punch Set

140407346
000134003S: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-470-4491
Tacker

144704491
N86C-1: RNCC: 3 | RNVC: 2

21 Jun 1994

5120-14-411-2113
Driftpin

144112113
121-502-10W26H: RNCC: 3 | RNVC: 2
121-502-10-W26H: RNCC: 5 | RNVC: 2
85-692-0022: RNCC: 6 | RNVC: 9

6 Aug 1986

5120-14-453-7020
Mechanical Puller

144537020
518249MT20-13R2: RNCC: 3 | RNVC: 2

5 Mar 1992

5120-14-548-0263
Mechanical Puller

145480263
56953656AA: RNCC: 3 | RNVC: 2

6 Dec 2005

5120-14-325-0255
Mechanical Puller

143250255
0S21453: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-428-5429
Mechanical Puller

144285429
4602EAV101: RNCC: 3 | RNVC: 2

8 Dec 1988

5120-14-542-9434
Mechanical Puller

145429434
8460001: RNCC: 3 | RNVC: 2
8460001: RNCC: 5 | RNVC: 2

14 Aug 2004

5120-14-441-7812
Mechanical Puller

144417812
45525428: RNCC: 3 | RNVC: 2
45525428: RNCC: 5 | RNVC: 9

18 Sep 1990

5120-14-483-8621
Mechanical Puller

144838621
0-67673-1: RNCC: 3 | RNVC: 2

5 Oct 1996

5120-14-486-5620
Hand Rivet Set

144865620
RT13663: RNCC: 3 | RNVC: 2

24 Mar 1997

5120-14-282-0730
Wood Mallet

142820730
4-0RMEMANCHEFRENE: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-426-3908
Drive Pin Punch

144263908
246.3: RNCC: 3 | RNVC: 2
3148511587102: RNCC: 5 | RNVC: 2
1003495N00: RNCC: 5 | RNVC: 2
91606345: RNCC: 5 | RNVC: 2
246-3: RNCC: 5 | RNVC: 2
0158710: RNCC: 5 | RNVC: 9

25 Aug 1988

5120-14-202-9661
Socket Wrench

142029661
4004: RNCC: 3 | RNVC: 2

1 Jan 1963

5120-14-293-0698
Socket Wrench

142930698
6800-0002: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-437-0709
Hand Beading Tool

144370709
NO PRIMARY REF14-437-0709: RNCC: 3 | RNVC: 2
395092: RNCC: 5 | RNVC: 9
395092: RNCC: 5 | RNVC: 9

17 Jan 1990

5120-14-442-1523
Rivet Bucking Bar

144421523
853-600-255-0: RNCC: 3 | RNVC: 2

3 Oct 1990

5120-14-459-5119
Mechanical Puller

144595119
14189540N: RNCC: 3 | RNVC: 2

9 Dec 1992

5120-14-228-0462
Socket Wrench

142280462
HSS831AHB706: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-334-8278
Socket Wrench

143348278
72 1-4: RNCC: 3 | RNVC: 2

2 Jun 1976

5120-14-461-0100
Hand Yoke Riveter

144610100
0292610: RNCC: 3 | RNVC: 2
SN0: RNCC: 5 | RNVC: 2
YSN.2: RNCC: 5 | RNVC: 2

17 Feb 1993

5120-14-461-6871
Socket Wrench

144616871
74.T5,5: RNCC: 3 | RNVC: 2
3148511195246: RNCC: 5 | RNVC: 2

22 Mar 1993

5120-14-497-8725
Open End Box Wrench

144978725
F300 0T 022 9508: RNCC: 3 | RNVC: 2
46117478: RNCC: 5 | RNVC: 2

22 Oct 1997

5120-14-368-9094
Box Wrench

143689094
4CM0334: RNCC: 3 | RNVC: 2

10 Mar 1981

5120-14-352-5435
Socket Wrench

143525435
0M577: RNCC: 3 | RNVC: 2
0M577: RNCC: 5 | RNVC: 2

16 Oct 1978

5120-14-236-2611
Socket Wrench

142362611
A267-1: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-483-8609
Mechanical Puller

144838609
0-65193-4: RNCC: 3 | RNVC: 2

5 Oct 1996

5120-14-542-9626
Socket Wrench

145429626
820010: RNCC: 3 | RNVC: 2

14 Aug 2004

5120-14-331-4227
Socket Wrench

143314227
GMN307704P9: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-399-1998
Mechanical Puller

143991998
P042660-7: RNCC: 3 | RNVC: 2
0-42660-7: RNCC: 5 | RNVC: 2

6 Mar 1985

5120-14-400-3937
Open End Box Wrench

144003937
104-H-10X12: RNCC: 3 | RNVC: 2
104H10X12: RNCC: 3 | RNVC: 2
3272670259621: RNCC: 5 | RNVC: 2
85-692-9187: RNCC: 6 | RNVC: 9

24 Apr 1985

5120-14-273-7014
Hand Hammer Head

142737014
208-34: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-468-5707
Stake Puller Kit

144685707
131914: RNCC: 3 | RNVC: 2

9 Mar 1994

5120-14-432-7229
Seal Inserter

144327229
OUT50161: RNCC: 3 | RNVC: 2
0UT50161: RNCC: 5 | RNVC: 2

21 Jun 1989

5120-14-530-8565
Open End Box Wrench

145308565
116650: RNCC: 3 | RNVC: 2
3148511166505: RNCC: 5 | RNVC: 2
70A.12: RNCC: 5 | RNVC: 2

9 Jul 2002

5120-14-249-9419
Box Wrench

142499419
62-27X29: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-369-3283
Seal Inserter

143693283
366A93-3211-21: RNCC: 3 | RNVC: 2

17 Apr 1981

5120-14-504-0286
Plier Wrench

145040286
518.1: RNCC: 3 | RNVC: 2
0182125: RNCC: 5 | RNVC: 2
3148511821251: RNCC: 5 | RNVC: 2
0714 09 12: RNCC: 5 | RNVC: 2

4 Feb 1998

5120-14-519-3841
Socket Wrench Set

145193841
S.450EP: RNCC: 3 | RNVC: 2
S.450EP: RNCC: 5 | RNVC: 2

15 Mar 2000

5120-14-280-8759
Box Wrench

142808759
50.72: RNCC: 3 | RNVC: 2
3148511069806: RNCC: 5 | RNVC: 2
50-72: RNCC: 5 | RNVC: 2
0106980: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-432-7077
Seal Inserter

144327077
OUT11821-14: RNCC: 3 | RNVC: 2
0UT11821-14: RNCC: 5 | RNVC: 2

21 Jun 1989

5120-14-355-4540
Socket Wrench

143554540
80-65V: RNCC: 3 | RNVC: 2

19 Mar 1979

5120-14-464-6861
Rubber Mallet

144646861
3211.20.022: RNCC: 3 | RNVC: 9
93.091.43: RNCC: 5 | RNVC: 9

25 Aug 1993

5120-14-292-6024
Fuse Puller

142926024
99029500: RNCC: 3 | RNVC: 2
99029500: RNCC: 5 | RNVC: 2
0882120: RNCC: 5 | RNVC: 2
90181: RNCC: 5 | RNVC: 9
99029500: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-527-1806
Seal Inserter

145271806
10441574: RNCC: 3 | RNVC: 2

10 Oct 2001

5120-14-468-3900
Hand Caster Fork

144683900
RF200: RNCC: 3 | RNVC: 2
91502445: RNCC: 5 | RNVC: 2

23 Feb 1994

5120-14-415-6629
Driftpin

144156629
STM03213: RNCC: 3 | RNVC: 2
STM03213: RNCC: 5 | RNVC: 2

18 May 1987

5120-14-480-2681
Mechanical Puller

144802681
888-366-100-1: RNCC: 3 | RNVC: 2

28 Feb 1996

5120-14-304-1786
Blacksmiths' Tongs

143041786
3806: RNCC: 3 | RNVC: 9

1 Jan 1974

5120-14-275-8968
Fid

142758968
14-16B0IS30: RNCC: 2 | RNVC: 2

1 Jan 1971

5120-14-352-5924
Box Wrench

143525924
8810131059: RNCC: 3 | RNVC: 2

16 Oct 1978

5120-14-532-0097
Nutdriver

145320097
61023854AA: RNCC: 3 | RNVC: 2
8041445Y00: RNCC: 5 | RNVC: 2

9 Oct 2002

5120-14-530-6440
Seal Inserter

145306440
D47725R5: RNCC: 3 | RNVC: 2

1 Jul 2002

5120-14-441-2289
Mechanical Puller

144412289
6803V32-2155-00: RNCC: 3 | RNVC: 2

22 Aug 1990

5120-14-540-0937
Mechanical Puller

145400937
3610-320: RNCC: 3 | RNVC: 2
SYQ4847: RNCC: 5 | RNVC: 2

4 Mar 2004

5120-14-244-9024
Box Wrench

142449024
111-32X35: RNCC: 3 | RNVC: 9
DEM111-32X35: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-228-1414
Rawhide Mallet

142281414
3902-80: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-531-8876
Seal Inserter

145318876
T651G3003101: RNCC: 3 | RNVC: 2

25 Sep 2002

5120-14-553-1807
Pipe Wrench

145531807
62814: RNCC: 3 | RNVC: 2

12 Mar 2007

5120-14-543-4435
Stake Remover

145434435
63995C1: RNCC: 3 | RNVC: 2
63995: RNCC: 5 | RNVC: 2

29 Oct 2004

5120-14-321-1508
Box Wrench

143211508
100-25X28: RNCC: 3 | RNVC: 2
3272670271128: RNCC: 5 | RNVC: 2
SYQ0077: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-448-6394
Socket Wrench

144486394
101 100-19: RNCC: 3 | RNVC: 9
W-1901: RNCC: 3 | RNVC: 9

4 Jul 1991

5120-14-355-2353
Socket Wrench

143552353
5113: RNCC: 3 | RNVC: 2
0056127642: RNCC: 5 | RNVC: 2
0056127642: RNCC: 5 | RNVC: 9

19 Mar 1979

5120-14-417-1022
Mechanical Puller

144171022
536991: RNCC: 3 | RNVC: 2

1 Jul 1987

5120-14-417-1019
Drive Pin Punch

144171019
536650: RNCC: 3 | RNVC: 2

1 Jul 1987

5120-14-444-9186
Mechanical Puller

144449186
1003296B00: RNCC: 3 | RNVC: 2

28 Jan 1991

5120-14-292-3220
Hand Screw Jack

142923220
NO PRIMARY REF14-292-3220: RNCC: 3 | RNVC: 2
C115: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-322-9743
Driftpin

143229743
121E94-234-20-0: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-511-3840
Mechanical Puller

145113840
MGB096-26: RNCC: 3 | RNVC: 2
MGB096-26: RNCC: 5 | RNVC: 2

16 Dec 1998

5120-14-423-0124
Mechanical Puller

144230124
U.306J1: RNCC: 3 | RNVC: 2
3148515241734: RNCC: 5 | RNVC: 2
U306-J1: RNCC: 5 | RNVC: 2
FACOM U-306J1: RNCC: 5 | RNVC: 2
V306J1: RNCC: 5 | RNVC: 9
0524173: RNCC: 5 | RNVC: 9
958 285 000 001: RNCC: 6 | RNVC: 9

31 Mar 1988

5120-14-536-1382
Socket Wrench

145361382
4518-1070: RNCC: 3 | RNVC: 2

9 Jul 2003

5120-14-374-1810
Driftpin

143741810
3599189: RNCC: 3 | RNVC: 2
55000042: RNCC: 5 | RNVC: 2
131764N2: RNCC: 5 | RNVC: 2
3599189: RNCC: 5 | RNVC: 2

8 Dec 1981

5120-14-415-4722
Mechanical Puller

144154722
4706: RNCC: 3 | RNVC: 2

18 May 1987

5120-14-509-2764
Socket Wrench Set

145092764
STX.40: RNCC: 3 | RNVC: 2

21 Oct 1998

5120-14-328-6564
Open End Box Wrench

143286564
1949Z1X1 1-8: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-425-9230
Seal Inserter

144259230
X6MCAAMX167324REPAM006: RNCC: 3 | RNVC: 2

28 Jul 1988

5120-14-527-7159
Seal Inserter

145277159
888-491-400-1: RNCC: 3 | RNVC: 2

14 Nov 2001

5120-14-040-2894
Mechanical Puller

140402894
RT10986: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-460-3548
Pin Inserter

144603548
39116543: RNCC: 3 | RNVC: 9

21 Jan 1993

5120-14-416-3150
Mechanical Puller

144163150
47368A: RNCC: 3 | RNVC: 2
47368: RNCC: 5 | RNVC: 2

3 Jun 1987

5120-14-534-3248
Socket Wrench

145343248
NNM0053905413725: RNCC: 2 | RNVC: 2

19 Mar 2003

5120-14-470-7698
Hand Beading Tool

144707698
629194142: RNCC: 3 | RNVC: 2
F300 0T 017 1234: RNCC: 5 | RNVC: 9

6 Jul 1994

5120-14-201-0121
Sewing Palm

142010121
9181: RNCC: 3 | RNVC: 2
0UT1-101: RNCC: 5 | RNVC: 9

1 Jan 1962

5120-14-409-7203
Seal Inserter

144097203
OUT50108-2: RNCC: 3 | RNVC: 2
0UT50108-2: RNCC: 5 | RNVC: 2

28 May 1986

5120-14-501-7301
Mechanical Puller

145017301
888-375-700-1: RNCC: 3 | RNVC: 2

5 Nov 1997

5120-14-514-3825
Open End Box Wrench

145143825
ENFD29468-12X13: RNCC: 3 | RNVC: 2

19 May 1999

5120-14-497-2772
Socket Wrench

144972772
89-SD-13: RNCC: 3 | RNVC: 2
89SD13: RNCC: 3 | RNVC: 2
3272670336735: RNCC: 5 | RNVC: 2
F300 0T 022 9316: RNCC: 6 | RNVC: 9

15 Oct 1997

5120-14-519-5849
Drive Pin Punch

145195849
7-25A: RNCC: 3 | RNVC: 2
3272670412880: RNCC: 5 | RNVC: 2

22 Mar 2000

5120-14-507-5809
Hand Hammer

145075809
215.26: RNCC: 3 | RNVC: 2

23 Jul 1998

5120-14-511-5433
Mechanical Puller

145115433
U.16A18: RNCC: 3 | RNVC: 2
3148510664606: RNCC: 5 | RNVC: 2

23 Dec 1998

5120-14-501-5358
Ratchet Wrench

145015358
SE082EE12: RNCC: 3 | RNVC: 2

3 Nov 1997

5120-14-546-3535
Socket Wrench

145463535
30100001438: RNCC: 3 | RNVC: 2

28 Jun 2005

5120-14-459-0710
Socket Wrench

144590710
008270222P: RNCC: 3 | RNVC: 2

18 Nov 1992

5120-14-256-7261
Hand Rivet Set

142567261
M0B228-5: RNCC: 3 | RNVC: 2
1532-5: RNCC: 5 | RNVC: 2

1 Jan 1969

5120-14-322-7488
Hand Screw Jack

143227488
5509382MLE5888: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-366-8461
Driftpin

143668461
30MS087-803G: RNCC: 3 | RNVC: 2

20 Nov 1980

5120-14-551-8084
Socket Wrench Set

145518084
J.431DP: RNCC: 3 | RNVC: 2

26 Oct 2006

5120-14-361-7787
Hand Screw Jack

143617787
8813430000: RNCC: 3 | RNVC: 2

20 Feb 1980

5120-14-364-1517
Socket Wrench

143641517
72-5: RNCC: 3 | RNVC: 2

7 Aug 1980

5120-14-463-1710
Hand Beading Tool

144631710
16380884: RNCC: 3 | RNVC: 2
16380884: RNCC: 5 | RNVC: 9

26 May 1993

5120-14-202-0088
Socket Wrench

142020088
NO PRIMARY REF14-202-0088: RNCC: 3 | RNVC: 2
1729-20: RNCC: 5 | RNVC: 9

1 Jan 1963

5120-14-446-1021
Hand Beading Tool

144461021
853-600-276-0: RNCC: 3 | RNVC: 2

6 Mar 1991

5120-14-431-2683
Mechanical Puller

144312683
3160S95-68-030: RNCC: 3 | RNVC: 2

12 Apr 1989

5120-14-365-8675
Socket Wrench

143658675
76.33: RNCC: 3 | RNVC: 2
3148511210505: RNCC: 5 | RNVC: 2
76-33: RNCC: 5 | RNVC: 2
0121050: RNCC: 5 | RNVC: 9

8 Oct 1980

5120-14-517-5080
Box Wrench

145175080
GS146-6X7: RNCC: 3 | RNVC: 2
1.70.1900: RNCC: 5 | RNVC: 2

3 Jan 2000

5120-14-533-1411
Seal Inserter

145331411
888-452-005-0: RNCC: 3 | RNVC: 2

23 Jan 2003

5120-14-536-4328
Seal Inserter

145364328
132555: RNCC: 3 | RNVC: 2

5 Aug 2003

5120-14-284-6180
Aligning Punch

142846180
BB52: RNCC: 3 | RNVC: 9

1 Jan 1972

5120-14-511-7325
Drive Pin Punch

145117325
249.G8: RNCC: 3 | RNVC: 2
159456: RNCC: 5 | RNVC: 2
3148511594568: RNCC: 5 | RNVC: 2

13 Jan 1999

5120-14-232-9335
Plastic Mallet

142329335
207-32CC: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-396-1830
Float

143961830
4301020: RNCC: 3 | RNVC: 2

27 Nov 1984

5120-14-554-4027
Mechanical Puller

145544027
M20940: RNCC: 3 | RNVC: 2

2 Jul 2007

5120-14-434-3263
Seal Inserter

144343263
EMH141378BA: RNCC: 3 | RNVC: 2
EMH141378BA: RNCC: 5 | RNVC: 9

20 Sep 1989

5120-14-536-1141
Oil Filter Wrench

145361141
99169: RNCC: 3 | RNVC: 2

9 Jul 2003

5120-14-295-8373
Mechanical Puller

142958373
0-64025: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-539-5332
Brake Repair Pliers

145395332
DF.6: RNCC: 3 | RNVC: 2

22 Jan 2004

5120-14-400-6406
Hot Line Stick

144006406
CS90F: RNCC: 3 | RNVC: 2

8 May 1985

5120-14-284-3305
Pinch Bar

142843305
150-100: RNCC: 3 | RNVC: 2
150-1000MM: RNCC: 5 | RNVC: 2
SYQ0701: RNCC: 5 | RNVC: 2
0150100601: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-247-4001
Lamp Extractor

142474001
8057: RNCC: 3 | RNVC: 9
A3-8057A: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-451-4121
Screw Extractor

144514121
885.EH5: RNCC: 3 | RNVC: 2
3148512105053: RNCC: 5 | RNVC: 2
91627175: RNCC: 5 | RNVC: 2
0690 141 5: RNCC: 5 | RNVC: 2
885EH5: RNCC: 5 | RNVC: 2
0210505: RNCC: 5 | RNVC: 9

19 Nov 1991

5120-14-516-9266
Screw Extractor

145169266
285.25: RNCC: 3 | RNVC: 2

27 Oct 1999

5120-14-413-7932
Box Wrench

144137932
T3023BM8F15A: RNCC: 3 | RNVC: 2

15 Jan 1987

5120-14-534-0863
Seal Inserter

145340863
712997: RNCC: 3 | RNVC: 2

12 Mar 2003

5120-14-447-9983
Seal Inserter

144479983
A37637K: RNCC: 3 | RNVC: 2

12 Jun 1991

5120-14-237-4731
Drive Pin Punch

142374731
3130-98-02-601: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-529-3212
Mechanical Puller

145293212
4610030500: RNCC: 3 | RNVC: 2

20 Mar 2002

5120-14-530-6424
Seal Inserter

145306424
D47731R1: RNCC: 3 | RNVC: 2

1 Jul 2002

5120-14-422-7343
Driftpin

144227343
420941: RNCC: 3 | RNVC: 2
420941: RNCC: 5 | RNVC: 9

17 Mar 1988

5120-14-530-6432
Seal Inserter

145306432
D47725R1: RNCC: 3 | RNVC: 2

1 Jul 2002

5120-14-317-0378
Mechanical Puller

143170378
RT4793: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-329-6622
Mechanical Puller

143296622
8812251000: RNCC: 3 | RNVC: 2
7M123AE: RNCC: 5 | RNVC: 2

2 Jul 1975

5120-14-238-7287
Mechanical Puller

142387287
RK351: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-549-1326
Oil Filter Wrench

145491326
D.156: RNCC: 3 | RNVC: 2
131527: RNCC: 3 | RNVC: 2

3 Mar 2006

5120-14-380-0321
Hand Screw Jack

143800321
905096: RNCC: 3 | RNVC: 2

8 Nov 1982

5120-14-518-2846
Hand Hammer

145182846
0003550201: RNCC: 3 | RNVC: 2

2 Feb 2000

5120-14-224-9818
Socket Wrench

142249818
3049-3-6: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-486-5657
Drill Guide

144865657
RT14660: RNCC: 3 | RNVC: 2

25 Mar 1997

5120-14-449-8740
Box Wrench

144498740
60709: RNCC: 3 | RNVC: 2
91705845: RNCC: 5 | RNVC: 2

11 Sep 1991

5120-14-525-4367
Pipe Wrench

145254367
135.24: RNCC: 3 | RNVC: 2

30 May 2001

5120-14-228-3046
Box Wrench

142283046
K044BB7AREP2: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-514-0457
Socket Wrench

145140457
LDB301300: RNCC: 3 | RNVC: 2

22 Apr 1999

5120-14-537-5128
Aligning Punch

145375128
485231-6: RNCC: 3 | RNVC: 2

3 Nov 2003

5120-14-278-7831
Plastic Mallet

142787831
NO PRIMARY REF14-278-7831: RNCC: 3 | RNVC: 2
208-40BB: RNCC: 5 | RNVC: 2
MX185TRC7: RNCC: 5 | RNVC: 2
91618403: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-417-1687
Mechanical Puller

144171687
4A421W26H6: RNCC: 3 | RNVC: 2
85-692-5390: RNCC: 6 | RNVC: 9

1 Jul 1987

5120-14-261-6188
Mechanical Puller

142616188
NO PRIMARY REF14-261-6188: RNCC: 3 | RNVC: 2
12567: RNCC: 5 | RNVC: 9

1 Jan 1970

5120-14-386-0424
Mechanical Puller

143860424
005373557P: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-402-3781
Mechanical Puller

144023781
8814284000: RNCC: 3 | RNVC: 2

3 Jul 1985

5120-14-421-3444
Nail Set

144213444
537123: RNCC: 3 | RNVC: 2

14 Jan 1988

5120-14-537-5162
Aligning Punch

145375162
521884: RNCC: 3 | RNVC: 2
521884: RNCC: 5 | RNVC: 2

3 Nov 2003

5120-14-511-5898
Plastic Mallet

145115898
216.50: RNCC: 3 | RNVC: 2
148983: RNCC: 5 | RNVC: 2
3148511489833: RNCC: 5 | RNVC: 2

6 Jan 1999

5120-14-438-9701
Mechanical Puller

144389701
330A98-3367-0181: RNCC: 3 | RNVC: 2

11 Apr 1990

5120-14-522-4616
Mechanical Puller

145224616
09P2581: RNCC: 3 | RNVC: 2

31 Oct 2000

5120-14-387-8640
Mechanical Puller

143878640
50409: RNCC: 3 | RNVC: 2
0U50409: RNCC: 5 | RNVC: 9
50409: RNCC: 5 | RNVC: 9
OU50409: RNCC: 5 | RNVC: 9

12 Oct 1983

5120-14-218-9667
Box Wrench

142189667
100-18X19: RNCC: 3 | RNVC: 2
113-18X19: RNCC: 3 | RNVC: 9
3272670259249: RNCC: 5 | RNVC: 2
DEM113-18X19: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-399-3310
Box Wrench

143993310
100-483: RNCC: 3 | RNVC: 2

6 Mar 1985

5120-14-540-5474
Pipe Vise

145405474
2002 30: RNCC: 3 | RNVC: 2
2002300: RNCC: 5 | RNVC: 9

1 Apr 2004

5120-14-231-4306
Box Wrench

142314306
044BBM4BREP12: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-317-6582
Sewing Palm

143176582
08P357REP4: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-381-9272
Mechanical Puller

143819272
6801E31-1222-03: RNCC: 3 | RNVC: 2
68-01-330A31-1222-03: RNCC: 5 | RNVC: 2

25 Jan 1983

5120-14-532-7104
Sealant Dispenser

145327104
1473M7: RNCC: 3 | RNVC: 2
8040507P00: RNCC: 5 | RNVC: 2

4 Dec 2002

5120-14-451-1060
Socket Wrench

144511060
269023: RNCC: 3 | RNVC: 9

30 Oct 1991

5120-14-382-3530
Socket Wrench

143823530
402250: RNCC: 3 | RNVC: 2
BGE402250: RNCC: 3 | RNVC: 2

17 Feb 1983

5120-14-459-0416
Seal Inserter

144590416
341A93-3225-02: RNCC: 3 | RNVC: 2

17 Nov 1992

5120-14-451-5207
Seal Inserter

144515207
547907: RNCC: 3 | RNVC: 2

21 Nov 1991

5120-14-553-2222
Hand Tube Bender

145532222
251015: RNCC: 3 | RNVC: 2

15 Mar 2007

5120-14-526-7888
Open End Box Wrench

145267888
132195: RNCC: 3 | RNVC: 2

5 Sep 2001

5120-14-292-7045
Box Wrench

142927045
0D2L26: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-342-4693
Drill Drift

143424693
STEL611: RNCC: 3 | RNVC: 2

16 May 1977

5120-14-304-4406
Seal Inserter

143044406
8811320000: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-386-1615
Mechanical Puller

143861615
6801P35-3026-20: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-524-4978
Aligning Punch

145244978
Q47796-1000: RNCC: 3 | RNVC: 2

21 Mar 2001

5120-14-443-9425
Box Wrench

144439425
GS 145-09: RNCC: 3 | RNVC: 2

13 Dec 1990

5120-14-429-1417
Mechanical Puller

144291417
537214: RNCC: 3 | RNVC: 2

11 Jan 1989

5120-14-427-6519
Drill Guide

144276519
NO PRIMARY REF14-427-6519: RNCC: 3 | RNVC: 2
E0949666: RNCC: 5 | RNVC: 9

27 Oct 1988

5120-14-377-1840
Mechanical Puller

143771840
225981: RNCC: 3 | RNVC: 2
059981: RNCC: 5 | RNVC: 2
00059981: RNCC: 5 | RNVC: 2

17 May 1982

5120-14-200-3030
Box Wrench

142003030
100-17X19: RNCC: 3 | RNVC: 2
3272670295988: RNCC: 5 | RNVC: 2

1 Jan 1962

5120-14-525-4365
Machinist's Vise

145254365
1223.90E: RNCC: 3 | RNVC: 2

30 May 2001

5120-14-433-3251
Drain Plug Wrench

144333251
536888: RNCC: 3 | RNVC: 2
00536888: RNCC: 5 | RNVC: 2

19 Jul 1989

5120-14-549-8325
Mechanical Puller

145498325
332A93-3130-01: RNCC: 3 | RNVC: 2

16 May 2006

5120-14-482-8729
Hand Screw Jack

144828729
8708240: RNCC: 3 | RNVC: 2

1 Aug 1996

5120-14-315-9088
Socket Wrench

143159088
2-14412: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-432-9740
Mechanical Puller

144329740
TEG: RNCC: 3 | RNVC: 2
ZINTEG: RNCC: 5 | RNVC: 9

5 Jul 1989

5120-14-534-1843
Hammer Handle

145341843
M03-032210: RNCC: 3 | RNVC: 2
MO3-032210: RNCC: 5 | RNVC: 2

14 Mar 2003

5120-14-532-5085
Pinch Bar

145325085
10459880: RNCC: 3 | RNVC: 2

6 Nov 2002

5120-14-442-6823
Seal Inserter

144426823
0UA15166B: RNCC: 3 | RNVC: 2

24 Oct 1990

5120-14-542-0734
Driftpin

145420734
AXE080004001E1: RNCC: 3 | RNVC: 2

2 Jul 2004

5120-14-458-8843
Seal Inserter

144588843
M34035: RNCC: 3 | RNVC: 2

5 Nov 1992

5120-14-464-2480
Seal Inserter

144642480
854-500-393-0: RNCC: 3 | RNVC: 2

28 Jul 1993

5120-14-436-4738
Hand Beading Tool

144364738
853-600-166-0: RNCC: 3 | RNVC: 2

3 Jan 1990

5120-14-440-2920
Mechanical Puller

144402920
5000261495: RNCC: 3 | RNVC: 2
89409912: RNCC: 5 | RNVC: 2

11 Jul 1990

5120-14-400-4658
Ratchet Screwdriver

144004658
0007060: RNCC: 3 | RNVC: 2
AMC-M: RNCC: 5 | RNVC: 2
AMC.M: RNCC: 5 | RNVC: 2

24 Apr 1985

5120-14-537-4997
Crimping Tool Die

145374997
945045-1: RNCC: 3 | RNVC: 2

3 Nov 2003

5120-14-265-0914
Mechanical Puller

142650914
330A98-2043-00: RNCC: 3 | RNVC: 2
330A98-2043-0000: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-414-9550
Hammer Handle

144149550
210MC9: RNCC: 3 | RNVC: 2
3148511479483: RNCC: 5 | RNVC: 2

26 Mar 1987

5120-14-550-1064
Box Wrench

145501064
6514POC100001: RNCC: 3 | RNVC: 2

1 Jun 2006

5120-14-532-1144
Mechanical Puller

145321144
S639V3002101: RNCC: 3 | RNVC: 2

9 Oct 2002

5120-14-281-8194
Mechanical Puller

142818194
8810150000: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-445-5390
Drill Guide

144455390
39442572: RNCC: 3 | RNVC: 2

14 Feb 1991

5120-14-385-3445
Gear Inserter

143853445
6803P32-6000-02: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-434-6048
Tool Handle Wedge

144346048
6970-25: RNCC: 3 | RNVC: 2

26 Sep 1989

5120-14-442-7087
Socket Wrench

144427087
APEAC909-42215: RNCC: 3 | RNVC: 2
85-693-8539: RNCC: 6 | RNVC: 9

24 Oct 1990

5120-14-465-6510
Seal Inserter

144656510
851-500-459-0: RNCC: 3 | RNVC: 2

6 Oct 1993

5120-14-407-0767
Ratchet Wrench

144070767
LS06006-$0500: RNCC: 3 | RNVC: 2

29 Jan 1986

5120-14-413-0254
Mechanical Puller

144130254
790BE/LOG: RNCC: 3 | RNVC: 2

20 Nov 1986

5120-14-421-3301
Mechanical Puller

144213301
523138: RNCC: 3 | RNVC: 2

14 Jan 1988

5120-14-437-3267
Mechanical Puller

144373267
9689160134: RNCC: 3 | RNVC: 2

24 Jan 1990

5120-14-347-1228
Socket Wrench Set

143471228
0512500: RNCC: 3 | RNVC: 2
R.420U: RNCC: 5 | RNVC: 2
R420U: RNCC: 5 | RNVC: 2

19 Jan 1978

5120-14-332-0409
Socket Wrench

143320409
30087: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-530-2994
Hand Hammer

145302994
208A.50AB: RNCC: 3 | RNVC: 2

29 May 2002

5120-14-529-4667
Aligning Punch

145294667
6701BFP: RNCC: 3 | RNVC: 2

29 Mar 2002

5120-14-429-0319
Mechanical Puller

144290319
8815482000: RNCC: 3 | RNVC: 2

4 Jan 1989

5120-14-400-8809
Driftpin

144008809
16039803: RNCC: 3 | RNVC: 2
16039803: RNCC: 5 | RNVC: 9

21 May 1985

5120-14-541-1619
Hand Screw Jack

145411619
ETAP1729: RNCC: 3 | RNVC: 2

14 May 2004

5120-14-472-1607
Socket Wrench

144721607
695 720 030 080: RNCC: 3 | RNVC: 2

11 Oct 1994

5120-14-451-4961
Box Wrench

144514961
BB210: RNCC: 3 | RNVC: 9
91318511: RNCC: 5 | RNVC: 2

21 Nov 1991

5120-14-409-3518
Mechanical Puller

144093518
M11040: RNCC: 3 | RNVC: 2

28 May 1986

5120-14-366-8467
Driftpin

143668467
30MS087-811MV: RNCC: 3 | RNVC: 2

20 Nov 1980

5120-14-369-6050
Driftpin

143696050
3210-94-57-001: RNCC: 3 | RNVC: 2
85-691-1851: RNCC: 6 | RNVC: 9

17 Apr 1981

5120-14-437-1971
Mechanical Puller

144371971
45138581: RNCC: 3 | RNVC: 2

22 Jan 1990

5120-14-306-4215
Mechanical Puller

143064215
C46092: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-393-6712
Box Wrench

143936712
CLETRIANGULAIRE14MM: RNCC: 3 | RNVC: 2

7 Jun 1984

5120-14-400-6423
Hand Hammer

144006423
204-30ENX: RNCC: 3 | RNVC: 2

8 May 1985

5120-14-323-2074
Socket Wrench

143232074
A3BA: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-439-9757
Hand Hammer

144399757
4160153: RNCC: 3 | RNVC: 2

29 Jun 1990

5120-14-506-3981
Mechanical Puller

145063981
OUT304083T: RNCC: 3 | RNVC: 2
4083T: RNCC: 5 | RNVC: 2

22 Apr 1998

5120-14-399-6592
Mechanical Puller

143996592
396C1: RNCC: 3 | RNVC: 2
3272670287518: RNCC: 5 | RNVC: 2

6 Mar 1985

5120-14-287-8414
Open End Box Wrench

142878414
31809: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-342-8772
C Clamp

143428772
84: RNCC: 3 | RNVC: 2

16 May 1977

5120-14-331-4229
Socket Wrench

143314229
GMN307704P5: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-438-0937
Mechanical Puller

144380937
NO PRIMARY REF14-438-0937: RNCC: 3 | RNVC: 2
391409: RNCC: 5 | RNVC: 9
391409: RNCC: 5 | RNVC: 9

7 Mar 1990

5120-14-235-6194
Box Wrench

142356194
301738T: RNCC: 3 | RNVC: 2
17926T1REP10: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-552-2974
Socket Wrench

145522974
B.J16R1A: RNCC: 3 | RNVC: 2

11 Dec 2006

5120-14-545-6559
Ratchet Wrench Set

145456559
68BH JEGT: RNCC: 3 | RNVC: 2

26 Apr 2005

5120-14-526-8930
Oil Filter Wrench

145268930
81403AZ: RNCC: 3 | RNVC: 2
205092: RNCC: 3 | RNVC: 9
540008: RNCC: 5 | RNVC: 2

12 Sep 2001

5120-14-249-3949
Mechanical Puller

142493949
3210-97-33-340: RNCC: 3 | RNVC: 2
08-335: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-281-7603
Mechanical Puller

142817603
A121263: RNCC: 3 | RNVC: 2
100023: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-513-8669
Box Wrench

145138669
647470: RNCC: 3 | RNVC: 2

14 Apr 1999

5120-14-461-2739
Mechanical Puller

144612739
2201B: RNCC: 3 | RNVC: 2
5000262201: RNCC: 5 | RNVC: 2

3 Mar 1993

5120-14-285-4593
Drain Plug Wrench

142854593
C55630: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-274-8494
Pipe Vise

142748494
4018-1: RNCC: 3 | RNVC: 9

1 Jan 1971

5120-14-525-4366
Plier Wrench

145254366
513.5: RNCC: 3 | RNVC: 2
0714 09 05: RNCC: 5 | RNVC: 2

30 May 2001

5120-14-372-6047
Open End Box Wrench

143726047
1892-38: RNCC: 3 | RNVC: 2

21 Sep 1981

5120-14-537-9077
Ratchet Wrench

145379077
10709377000: RNCC: 3 | RNVC: 2

3 Dec 2003

5120-14-525-0694
Open End Box Wrench

145250694
70A.JE5T: RNCC: 3 | RNVC: 2

16 May 2001

5120-14-256-8897
Socket Wrench

142568897
NO PRIMARY REF14-256-8897: RNCC: 3 | RNVC: 2
144K272: RNCC: 5 | RNVC: 9

1 Jan 1969

5120-14-438-8808
Nutdriver

144388808
TB1030424: RNCC: 3 | RNVC: 2
TB1-03-04-24: RNCC: 5 | RNVC: 2

11 Apr 1990

5120-14-450-3006
Wood Mallet

144503006
63109-60: RNCC: 3 | RNVC: 2

25 Sep 1991

5120-14-508-8695
Rubber Mallet

145088695
MA21: RNCC: 3 | RNVC: 2

2 Oct 1998

5120-14-250-0097
Socket Wrench

142500097
M02041: RNCC: 3 | RNVC: 2
0000330724: RNCC: 5 | RNVC: 2
0000330724: RNCC: 5 | RNVC: 9
330724: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-536-1123
Mechanical Puller

145361123
98724: RNCC: 3 | RNVC: 2

9 Jul 2003

5120-14-530-6408
Seal Inserter

145306408
D47692R5: RNCC: 3 | RNVC: 2

1 Jul 2002

5120-14-518-0284
Hand Scissors Jack

145180284
5010269873: RNCC: 3 | RNVC: 2

21 Jan 2000

5120-14-458-8850
Piston Inserter

144588850
M35078: RNCC: 3 | RNVC: 2

5 Nov 1992

5120-14-297-4270
Socket Wrench Set

142974270
91J21: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-322-9744
Driftpin

143229744
121E94-234-30-0: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-398-3087
Hand Hammer

143983087
14000708: RNCC: 3 | RNVC: 2

31 Jan 1985

5120-14-509-9098
Pry Bar

145099098
B26-76: RNCC: 3 | RNVC: 2
5120AA1102058: RNCC: 6 | RNVC: 9

4 Nov 1998

5120-14-422-3528
Socket Wrench Set

144223528
GS 110B: RNCC: 3 | RNVC: 2

1 Mar 1988

5120-14-457-3626
Seal Inserter

144573626
45215139: RNCC: 3 | RNVC: 2
45215139: RNCC: 5 | RNVC: 9

27 Aug 1992

5120-14-321-0805
Box Wrench

143210805
50.78: RNCC: 3 | RNVC: 2
3148511070406: RNCC: 5 | RNVC: 2
50-78: RNCC: 5 | RNVC: 2
0107040: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-400-4663
Hand Tube Bender

144004663
344A.10: RNCC: 3 | RNVC: 2
3148511680780: RNCC: 5 | RNVC: 2
1715 122 010: RNCC: 5 | RNVC: 2
344-10: RNCC: 5 | RNVC: 9
0168078: RNCC: 5 | RNVC: 9

24 Apr 1985

5120-14-354-6759
Mechanical Puller

143546759
25545957200: RNCC: 3 | RNVC: 2
255459572: RNCC: 5 | RNVC: 9

31 Jan 1979

5120-14-385-3116
Mechanical Puller

143853116
360A93-3225-20: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-410-3453
Mechanical Puller

144103453
8813803000: RNCC: 3 | RNVC: 2

18 Jun 1986

5120-14-501-5350
Rack Bar Jack

145015350
SE107BE30: RNCC: 3 | RNVC: 2

3 Nov 1997

5120-14-338-7979
Jaw Cable Grip

143387979
186010: RNCC: 3 | RNVC: 2
27553: RNCC: 5 | RNVC: 2

17 Dec 1976

5120-14-340-7603
Hand Hammer Head

143407603
127-1250: RNCC: 3 | RNVC: 2

14 Feb 1977

5120-14-422-7597
Ratchet Wrench

144227597
LEVIERAMOVIBLEPOURTENDEUR364: RNCC: 3 | RNVC: 2
91595231: RNCC: 5 | RNVC: 2

17 Mar 1988

5120-14-369-6956
Box Wrench

143696956
BB724: RNCC: 3 | RNVC: 9

17 Apr 1981

5120-14-406-7846
Socket Wrench

144067846
TZ719: RNCC: 3 | RNVC: 2
TZ719: RNCC: 5 | RNVC: 9

8 Jan 1986

5120-14-388-6667
Fuse Puller

143886667
W097401: RNCC: 3 | RNVC: 2
W97401: RNCC: 5 | RNVC: 2

3 Nov 1983

5120-14-550-1915
Mechanical Puller

145501915
365A93-3380-00: RNCC: 3 | RNVC: 2

7 Jun 2006

5120-14-322-7350
Mechanical Puller

143227350
NO PRIMARY REF14-322-7350: RNCC: 3 | RNVC: 2
3012-78: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-461-6475
Hammer Handle

144616475
6665: RNCC: 3 | RNVC: 2

19 Mar 1993

5120-14-254-7138
Box Wrench

142547138
66515M4: RNCC: 3 | RNVC: 2

1 Jan 1969

5120-14-432-3881
Drive Pin Punch

144323881
548440: RNCC: 3 | RNVC: 2
00548440: RNCC: 5 | RNVC: 2

7 Jun 1989

5120-14-406-6516
Mechanical Puller

144066516
853-201-946-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-430-7501
Socket Wrench

144307501
68507-079-1: RNCC: 3 | RNVC: 9
85-693-9817: RNCC: 6 | RNVC: 9

22 Mar 1989

5120-14-442-1512
Hand Rivet Set

144421512
853-600-244-6: RNCC: 3 | RNVC: 2

3 Oct 1990

5120-14-442-2006
Hand Hammer

144422006
862A.80: RNCC: 3 | RNVC: 2
3148512092841: RNCC: 5 | RNVC: 2
91640384: RNCC: 5 | RNVC: 2
862A80: RNCC: 5 | RNVC: 2
0209284: RNCC: 5 | RNVC: 9

3 Oct 1990

5120-14-317-0455
Open End Box Wrench

143170455
RT5498: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-373-0074
Mechanical Puller

143730074
9970-121-298: RNCC: 3 | RNVC: 2
85-689-8775: RNCC: 6 | RNVC: 9

21 Sep 1981

5120-14-244-4256
Driftpin

142444256
10-021: RNCC: 3 | RNVC: 2
0UTF56: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-362-7541
Box Wrench

143627541
0M581-12: RNCC: 3 | RNVC: 2
0M581-12: RNCC: 5 | RNVC: 2

19 Mar 1980

5120-14-377-1828
Seal Inserter

143771828
224400: RNCC: 3 | RNVC: 2
00058424: RNCC: 5 | RNVC: 2
058424: RNCC: 5 | RNVC: 2

17 May 1982

5120-14-550-4116
Mechanical Puller

145504116
9995443: RNCC: 3 | RNVC: 2
9995443-0: RNCC: 5 | RNVC: 2

19 Jun 2006

5120-14-489-1014
Open End Box Wrench

144891014
18.19: RNCC: 3 | RNVC: 2
3148510933665: RNCC: 5 | RNVC: 2
0093366: RNCC: 5 | RNVC: 9

27 Jun 1997

5120-14-340-7599
Hand Hammer Head

143407599
204-64: RNCC: 3 | RNVC: 2

14 Feb 1977

5120-14-440-0689
Seal Inserter

144400689
02640802600: RNCC: 3 | RNVC: 2
026408026: RNCC: 5 | RNVC: 2
444407-00: RNCC: 5 | RNVC: 2

10 Jul 1990

5120-14-438-5090
Mechanical Puller

144385090
NO PRIMARY REF14-438-5090: RNCC: 3 | RNVC: 2
589954: RNCC: 5 | RNVC: 9
85-694-1094: RNCC: 6 | RNVC: 9

21 Mar 1990

5120-14-280-4179
Mechanical Puller

142804179
A124189: RNCC: 3 | RNVC: 2
100105: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-357-8910
Mechanical Puller

143578910
003175557P: RNCC: 3 | RNVC: 2

20 Jul 1979

5120-14-461-6508
Pry Bar

144616508
PL1DA002OR901014A: RNCC: 3 | RNVC: 2

19 Mar 1993

5120-14-539-2403
Ratchet Wrench

145392403
268E494-00: RNCC: 3 | RNVC: 2
268E494-00: RNCC: 5 | RNVC: 9

17 Dec 2003

5120-14-408-9822
Plier Clamp

144089822
214-31: RNCC: 3 | RNVC: 2
3272670257283: RNCC: 5 | RNVC: 2

9 Apr 1986

5120-14-366-2044
Mechanical Puller

143662044
96-20-11-161-00: RNCC: 3 | RNVC: 2
85-100-5007: RNCC: 6 | RNVC: 9

4 Nov 1980

5120-14-549-8444
Mechanical Puller

145498444
R6820G31-0001-06: RNCC: 3 | RNVC: 2

16 May 2006

5120-14-380-8517
Sealant Dispenser

143808517
RB1140-04: RNCC: 3 | RNVC: 2
70600310: RNCC: 5 | RNVC: 2

14 Dec 1982

5120-14-200-5144
Drive Pin Punch

142005144
AMG38844: RNCC: 3 | RNVC: 2

1 Jan 1962

5120-14-483-0728
Box Wrench Set

144830728
0530570: RNCC: 3 | RNVC: 2
55.JE5: RNCC: 5 | RNVC: 2
55JE5: RNCC: 5 | RNVC: 2

8 Aug 1996

5120-14-524-8171
Open End Box Wrench

145248171
8028618W00: RNCC: 3 | RNVC: 2

18 Apr 2001

5120-14-328-6563
Open End Box Wrench

143286563
1949Z3-4X7-8: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-314-9105
Box Wrench

143149105
0M413: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-041-6348
Drift Pin Set

140416348
2500000097: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-274-8333
Blacksmiths' Tongs

142748333
610-500: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-367-9095
Drive Pin Punch

143679095
BN311-545M25AREP1: RNCC: 2 | RNVC: 2
GY15619-1-27AMA: RNCC: 5 | RNVC: 2

19 Jan 1981

5120-14-359-1951
Mechanical Puller

143591951
U.35P: RNCC: 3 | RNVC: 2
300-6275: RNCC: 5 | RNVC: 2
3148510684505: RNCC: 5 | RNVC: 2
0691 504 200: RNCC: 5 | RNVC: 2
0187259S00: RNCC: 5 | RNVC: 2
U35P: RNCC: 5 | RNVC: 2
91539393: RNCC: 5 | RNVC: 2
0068450: RNCC: 5 | RNVC: 9
FACOMU.35P: RNCC: 5 | RNVC: 9

2 Oct 1979

5120-14-272-7571
Mechanical Puller

142727571
D1553-4871: RNCC: 3 | RNVC: 2
D1553-4871: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-528-0543
C Clamp

145280543
271A.80L: RNCC: 3 | RNVC: 2

12 Dec 2001

5120-14-391-4270
Inspection Mirror

143914270
834.R2: RNCC: 3 | RNVC: 2
91571791: RNCC: 5 | RNVC: 2
834R2: RNCC: 5 | RNVC: 2
3148512068303: RNCC: 5 | RNVC: 2
834R2: RNCC: 5 | RNVC: 2
0193069N00: RNCC: 5 | RNVC: 2
0206830: RNCC: 5 | RNVC: 9

1 Mar 1984

5120-14-385-3530
Mechanical Puller

143853530
703A93-0021-00: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-422-2203
Seal Inserter

144222203
0467-200300: RNCC: 3 | RNVC: 2

24 Feb 1988

5120-14-545-7969
Rack Bar Jack

145457969
N59030G/00: RNCC: 3 | RNVC: 2

16 May 2005

5120-14-507-8113
Socket Wrench

145078113
853-100-296-0: RNCC: 3 | RNVC: 2

17 Aug 1998

5120-14-392-0839
Open End Box Wrench

143920839
853-115-038-0: RNCC: 3 | RNVC: 2

21 Mar 1984

5120-14-458-1408
Stud Inserter

144581408
45056064: RNCC: 3 | RNVC: 2
45056064: RNCC: 5 | RNVC: 9

8 Oct 1992

5120-14-249-9416
Box Wrench

142499416
62-36X41: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-321-1564
Pin Vise

143211564
TR-20: RNCC: 3 | RNVC: 2
TR20: RNCC: 3 | RNVC: 2
3272670287969: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-438-6845
Socket Wrench

144386845
321A97-0081-00: RNCC: 3 | RNVC: 2

28 Mar 1990

5120-14-465-4701
Seal Inserter

144654701
851-500-146-0: RNCC: 3 | RNVC: 2

30 Sep 1993

5120-14-334-8128
Socket Wrench

143348128
89-15: RNCC: 3 | RNVC: 2
76.15: RNCC: 3 | RNVC: 2
76-15: RNCC: 5 | RNVC: 2
2695 612 615: RNCC: 5 | RNVC: 2
3148511208700: RNCC: 5 | RNVC: 2
237-6573: RNCC: 5 | RNVC: 2
0120870: RNCC: 5 | RNVC: 9
FACOM76.15: RNCC: 5 | RNVC: 9

2 Jun 1976

5120-14-352-9533
Open End Box Wrench

143529533
100F-8X9: RNCC: 3 | RNVC: 2
100F8X9: RNCC: 3 | RNVC: 2
3272670296633: RNCC: 5 | RNVC: 2

14 Nov 1978

5120-14-533-6408
Seal Inserter

145336408
853-203-278-0: RNCC: 3 | RNVC: 2

12 Feb 2003

5120-14-232-0887
Socket Wrench

142320887
72-3-2H: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-381-6210
Socket Wrench

143816210
6814-58767: RNCC: 3 | RNVC: 2

25 Jan 1983

5120-14-404-1096
Socket Wrench

144041096
80-11-P: RNCC: 3 | RNVC: 2
80-11P: RNCC: 3 | RNVC: 2
3272670241787: RNCC: 5 | RNVC: 2
80-11CP: RNCC: 5 | RNVC: 9

11 Sep 1985

5120-14-290-7517
Mechanical Puller

142907517
U.10: RNCC: 3 | RNVC: 2
91509050: RNCC: 5 | RNVC: 2
0521750: RNCC: 5 | RNVC: 2
3148515217500: RNCC: 5 | RNVC: 2
U10: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-517-7415
Seal Inserter

145177415
851-200-240-0: RNCC: 3 | RNVC: 2

5 Jan 2000

5120-14-465-4639
Seal Inserter

144654639
851-500-063-0: RNCC: 3 | RNVC: 2

30 Sep 1993

5120-14-306-3723
Mechanical Puller

143063723
NO PRIMARY REF14-306-3723: RNCC: 3 | RNVC: 2
RT6362: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-234-0038
Hand Screw Jack

142340038
NO PRIMARY REF14-234-0038: RNCC: 3 | RNVC: 2
40159: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-385-3108
Seal Inserter

143853108
360A93-3212-20: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-519-5848
Drive Pin Punch

145195848
7-50A: RNCC: 3 | RNVC: 2
3272670412903: RNCC: 5 | RNVC: 2

22 Mar 2000

5120-14-220-7478
Socket Wrench

142207478
BE42-23X23: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-232-6093
Socket Wrench

142326093
8810254003: RNCC: 3 | RNVC: 2
6-001-577: RNCC: 5 | RNVC: 2
6001577: RNCC: 5 | RNVC: 2
0T2-2-28: RNCC: 5 | RNVC: 9
0T2-2-28: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-304-6343
Box Wrench Set

143046343
NO PRIMARY REF14-304-6343: RNCC: 3 | RNVC: 2
62JE15: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-527-7164
Mechanical Puller

145277164
888-492-400-1: RNCC: 3 | RNVC: 2

14 Nov 2001

5120-14-466-3796
Mechanical Puller

144663796
U21878000: RNCC: 3 | RNVC: 2

3 Nov 1993

5120-14-544-4286
Drain Plug Wrench

145444286
5712000703: RNCC: 3 | RNVC: 2

31 Jan 2005

5120-14-410-6339
Seal Inserter

144106339
P4-6: RNCC: 3 | RNVC: 2
P4-6: RNCC: 5 | RNVC: 9

9 Jul 1986

5120-14-425-6819
Mechanical Puller

144256819
8812168000: RNCC: 3 | RNVC: 2

21 Jul 1988

5120-14-458-2039
Socket Wrench

144582039
4CM3031-A: RNCC: 3 | RNVC: 2

8 Oct 1992

5120-14-281-7589
Mechanical Puller

142817589
A121887: RNCC: 3 | RNVC: 2
100066: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-325-0574
Funnel

143250574
0S21884: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-354-1119
Mechanical Puller

143541119
0M00022: RNCC: 3 | RNVC: 2

16 Jan 1979

5120-14-467-8511
Plastic Mallet

144678511
208A.32AB: RNCC: 3 | RNVC: 2
208A32AB: RNCC: 5 | RNVC: 2
3148511476420: RNCC: 5 | RNVC: 2
0203113D00: RNCC: 5 | RNVC: 2
91638899: RNCC: 5 | RNVC: 2
0147642: RNCC: 5 | RNVC: 9
0536100: RNCC: 5 | RNVC: 9

27 Jan 1994

5120-14-274-8035
Hammer Handle

142748035
E71011C38A310: RNCC: 2 | RNVC: 2

1 Jan 1971

5120-14-483-0671
Hand Vise Jaw

144830671
410.S1: RNCC: 3 | RNVC: 2
3148511753705: RNCC: 5 | RNVC: 2
0175370: RNCC: 5 | RNVC: 2
175370: RNCC: 5 | RNVC: 9

8 Aug 1996

5120-14-401-5201
Socket Wrench Set

144015201
74.P14E: RNCC: 3 | RNVC: 2
74P14E: RNCC: 5 | RNVC: 2
91639875: RNCC: 5 | RNVC: 2
0613 251 90: RNCC: 5 | RNVC: 2
3148515321603: RNCC: 5 | RNVC: 2
0532160: RNCC: 5 | RNVC: 9

13 Jun 1985

5120-14-432-7066
Seal Inserter

144327066
OUT11815-1: RNCC: 3 | RNVC: 2
0UT11815-1: RNCC: 5 | RNVC: 2

21 Jun 1989

5120-14-529-2913
Socket Wrench

145292913
101376: RNCC: 3 | RNVC: 9

20 Mar 2002

5120-14-236-4615
Box Wrench

142364615
60935MREP19: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-402-6374
Box Wrench

144026374
8-137Z: RNCC: 3 | RNVC: 2
101234: RNCC: 5 | RNVC: 2

19 Jul 1985

5120-14-316-4995
Mechanical Puller

143164995
0U50124: RNCC: 3 | RNVC: 2
50124: RNCC: 5 | RNVC: 2

1 Jan 1975

Load More Results