What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.

A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Blacksmith's Punch?

A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Mechanical Finger?

A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.

A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Screwdriver And Wrench Assembly?

A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Stakeholder Bench Plate?

A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.

What is a Drill Drift?

A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.

A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Digging Bar?

A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

What is a Valve Spring Lifter?

A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.

What is a Fuse Puller?

A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.

Hand Tools, Nonedged, Nonpowered - France (FR)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by France (FR) - NCB is 14

Page 21 of 110

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by France

51	20	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - France (FR)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 16 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Pipe Vise? 19 Items: A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.
What is a Hand Vise? 25 Items: A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.
What is a Hand Hydraulic Jack? 133 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 153 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 903 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 17 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
Swage,Bottom,Blacksmith's 10 Items
What is a Hand Tube Flaring Tool? 23 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Blacksmith's Punch? 12 Items: A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.
What is a Drain Plug Wrench? 45 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 57 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 16 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 3829 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
Flatter,Blacksmith's 18 Items
Swage,Top,Blacksmith's 12 Items
What is a Pipe Wrench? 110 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 149 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 53 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
Screwdriver,Offset 54 Items
What is a Screwdriver Bit? 707 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Mechanical Finger? 25 Items: A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.
What is a Socket Wrench Socket? 1803 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 1412 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 1641 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 52 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 565 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
Jack,Push-Pull,Screw 30 Items
What is a Hand Tube Bender? 54 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 1106 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 55 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pinch Bar? 19 Items: A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.
What is a Pry Bar? 17 Items: A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.
What is a Wrecking Bar? 15 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 273 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 413 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 32 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 295 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
Face,Hammer,Inserted 25 Items
What is a Hole Sheet Metal Holder? 37 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Screwdriver And Wrench Assembly? 11 Items: A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.
What is a Hand Rivet Set? 121 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Stakeholder Bench Plate? 22 Items: A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.
What is a Drill Drift? 32 Items: A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.
What is a Tack Claw? 15 Items: A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.
Mattock 28 Items
What is a Socket Wrench Handle Bar? 108 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Stake,Sheet Metalworking 50 Items
Riveter,Blind,Hand 76 Items
What is a Hand Shovel? 43 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 98 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 30 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
What is a Digging Bar? 20 Items: A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.
Block,Dolly,Sheet Metalworking 56 Items
What is a Piston Ring Compressor? 34 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Valve Spring Lifter? 29 Items: A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.
What is a Fuse Puller? 20 Items: A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.
What is a Hand Lead Seal Press? 18 Items: A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.
What is a Hand Beading Tool? 91 Items: A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.
What is a Hand Hammer? 502 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
Head,Hand Hammer 81 Items
What is a Lamp Extractor? 76 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Tube Packing Ring Installing Tool? 29 Items: A Tube Packing Ring Installing Tool (INSTALLING TOOL,TUBE PACKING RING) is an item designed to insert packing rings on tubes within tube sheets on condensers and similar heat exchangers. In operation, the packing rings are assembled on the loading pin mandrel and are then transferred from the mandrel on to the tube by means of a tubular sleeve which slides on the mandrel.
What is a Carpenters' Pincers? 18 Items: A Carpenters' Pincers (PINCERS,CARPENTERS') is a plierlike hand tool having two opposing jaws which may have hammerlike backs. One handle has a nail or tack pulling claw, the other is shaped to form a screwdriver. The tool may contain a wire cutter. See also NIPPERS, END CUTTING and PINCERS, FARRIERS'.
What is a Trowel? 33 Items: A Trowel is a tool used for bricklaying, concrete work, plastering, linoleum laying, and masonry work. Excludes CORNER TOOL, CONCRETE.
What is a Hand Abrasive Wheel Dresser? 12 Items: A Hand Abrasive Wheel Dresser (DRESSER,ABRASIVE WHEEL,HAND) is a tool designed to remove glaze from, dress, shape, sharpen, and true solid abrasive wheels. Excludes NIB, DIAMOND, WHEEL DRESSING.
What is a Lamp Cap Extractor? 32 Items: A Lamp Cap Extractor (EXTRACTOR,LAMP CAP) is a tool specifically designed to facilitate the removal of lamp caps from switchboards, panels or indicator lamps.
What is a Rivet Bucking Bar? 51 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 86 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 277 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Woven Cable Grip? 23 Items: A Woven Cable Grip (GRIP,CABLE,WOVEN) is a braided wire device designed to clutch a bare or insulated conductor, cable or wire rope, for holding taut or drawing through conduit.
What is a Screw Thread Insert Extractor? 19 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is an Electron Tube Extractor? 18 Items: An Electron Tube Extractor (EXTRACTOR,ELECTRON TUBE) is a hand tool designed to facilitate the removal of electron tubes from electronic equipment and to avoid burning the fingers. It may be used for installing tubes.
What is a Cross Tip Screwdriver? 362 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 21 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 11 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 37 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Tool Handle Wedge? 10 Items: A Tool Handle Wedge (WEDGE,TOOL HANDLE) is excludes WEDGE, WOOD.
What is a Marlinespike? 16 Items: A Marlinespike is a metal hand tool made in the shape of a tapered pin. One end is pointed and the opposite end may be headed. The body may contain an eye for a lanyard sling, or be grooved lengthwise. Excludes CABLE PICK and FID.
What is an Aligning Punch? 272 Items: An Aligning Punch (PUNCH,ALIGNING) is a round, square, hexagonal or octagonal bodied hand tool, having a round tapered section 6-1/2 inches (165.1 mm) or more in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, DRIFT and DRIFTPIN.
What is a Drift Punch? 25 Items: A Drift Punch (PUNCH,DRIFT) is a round, square, hexagonal, or octagonal bodied hand tool, having a round tapered section 4 to 6 inches (101.6 mm to 152.4 mm) inclusive in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, ALIGNING; and DRIFTPIN.
What is a Putty Knife? 36 Items: A Putty Knife (KNIFE,PUTTY) is a hand tool with a nonedged blade fixed to a handle for laying on and smoothing putty and the like.
What is a Socket Wrench Adapter-Extension? 40 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 30 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 184 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Socket Wrench Ratchet Attachment? 47 Items: A Socket Wrench Ratchet Attachment (RATCHET ATTACHMENT,SOCKET WRENCH) is a connection for socket wrenches and handles. Consists of a ratcheting mechanism with an internal drive on one end and an external drive on the opposite end of the same size. The item is designed to permit continuous rotation of the socket in one direction without removing the socket or handle and without a complete rotation of the handle.
What is a Wrench Extension Handle? 81 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Socket Wrench Crowfoot Attachment? 155 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 33 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 43 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 48 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 2394 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 372 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 300 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 661 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 32 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand-Operated Grommet And Eyelet Press? 12 Items: A Hand-Operated Grommet And Eyelet Press (PRESS,GROMMET AND EYELET,HAND-OPERATED) is a device which punches or pierces holes and in addition fastens or sets eyelets and grommets in cloth, paper and similar material. May be used for fastening or setting rivets, lacing hooks and snaps in cloth, paper and similar material. It is hand operated by lever or screw action. See also PUNCH, EYELET, PLIER TYPE and PRESS, GROMMET AND EYELET, FOOT OPERATED.
What is a Claw Bar? 19 Items: A Claw Bar (BAR,CLAW) is before using, refer to Reference Drawing Group AG.
What is a Shock Type Wheel Stud Nut Wrench? 11 Items: A Shock Type Wheel Stud Nut Wrench (WRENCH,WHEEL STUD NUT,SHOCK TYPE) is a manually operated item designed to remove wheel stud nuts. In operation the inner nut is turned by a socket attached to a shaft on which is a loose swinging weighted handle. The weighted handle may be swung quickly to provide an impact force against the socket to loosen the seized or jammed nuts. The outer nut is held stationary by a separate hexagonal holding wrench.
What is a Drift Pin Set? 30 Items: A Drift Pin Set is a group of DRIFTPIN having different characteristics.
What is a Tire Iron? 25 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 115 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Blacksmith's Vise? 14 Items: A Blacksmith's Vise (VISE,BLACKSMITH'S) is a clamping device consisting of a mounting plate, one stationary and one manual screw actuated jaw and a supporting member extending downward from the stationary jaw to the floor. Designed to be mounted on a bench, table or the like. May include pipe holding jaws.
What is a Machinist's Vise? 64 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Clamp Base Bench Vise? 10 Items: A Clamp Base Bench Vise (VISE,BENCH,CLAMP BASE) is a clamping device consisting of a base, one stationary and one manual screw actuated jaw, and one or more guide bars or rods. Designed with an integral clamp for attaching to a bench, table, or the like. Does not include pipe holding jaws.
What is a Fixed Open End Wrench Set? 86 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Nail Set? 11 Items: A Nail Set is a round knurled, square, hexagonal or octagonal bodied hand tool having a round tapered section terminating in a cupped point. It is designed to set brad head nails below the surface by striking it a hammerlike blow. See also PUNCH, DRIVE PIN.
What is a Socket Wrench Set? 202 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is an Open End Box Wrench Set? 10 Items: An Open End Box Wrench Set (WRENCH SET,OPEN END BOX) is a group of WRENCH, OPEN END BOX having different characteristics.
What is a Combination Box And Open End Wrench Set? 72 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Box Wrench Set? 36 Items: A Box Wrench Set (WRENCH SET,BOX) is a group of box wrenches having different characteristics. It may include a HANDLE, EXTENSION WRENCH. See also WRENCH SET, COMBINATION, BOX AND OPEN END.
What is a Hot Line Stick? 26 Items: A Hot Line Stick is a hand tool consisting of a straight, round stick (pole) made of a suitable nonconductive material with a tool fixed to one end. The other end may be plain or have a butt mounting device fixed to it. Various types of attachments (hooks, rings, and bands) may be fixed to the body. It is designed for use in the repair and maintenance of live high voltage aerial lines. Excludes hot line sticks without heads.
Handle,Mattock-Pick 15 Items
What is a Wrench Kit? 73 Items: A Wrench Kit is an assortment of various types and sizes of wrenches such as SOCKET, SOCKET WRENCH; WRENCH, OPEN END, FIXED; WRENCH, BOX and the like. It may include adapter(s), ratchet(s) and the like. See also WRENCH SET (as modified.
What is a Brad Awl? 15 Items: A Brad Awl (AWL,BRAD) is a small, pointed tool used by shoemakers, saddlers, cabinetmakers, and the like for piercing small holes in wood, leather, and similar materials, and consists of a handle with a ferrule and a blade. The blade is round, terminating in a beveled, sharp straight edge and has a shank which passes through the center of the handle.
What is a Scratch Awl? 20 Items: A Scratch Awl (AWL,SCRATCH) is an item whose nominal length of blade is less than 4 inches (101.6 millimeters) and is provided with a nondetachable handle.
What is a Screw Extractor Set? 10 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 102 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
Jack,Scissors,Hand 26 Items
What is a Piston Ring Expander? 23 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
Mallet,Plastic 62 Items
Mallet,Rubber 10 Items
What is a Wood Mallet? 37 Items: A Wood Mallet (MALLET,WOOD) is excludes MALLET, CALKING; MALLET, HAWSING and MALLET, SERVING.
What is a Rack Bar Jack? 30 Items: A Rack Bar Jack (JACK,RACK BAR) is excludes JACK, BUMPER and JACK, REEL, HAND.
What is a Pneumatic Tire Valve Core Inserter And Remover? 14 Items: A Pneumatic Tire Valve Core Inserter And Remover (INSERTER AND REMOVER,PNEUMATIC TIRE VALVE CORE) is a bar of steel having a small cylindrical slotted end for removing or installing a valve core in a valve stem by a screwing motion. See also REPAIR TOOL, PNEUMATIC TIRE VALVE.
What is a Hand Tube Swaging Tool Kit? 20 Items: A Hand Tube Swaging Tool Kit (SWAGING TOOL KIT,TUBE,HAND) is a hand-operated noncutting tool consisting of one or more PUNCH, TUBE SWAGING, HAND and a tube flaring bar.
What is a Hand Tube Flaring Punch? 11 Items: A Hand Tube Flaring Punch (PUNCH,TUBE FLARING,HAND) is a noncutting tool having a shaped end or section designed to flare the ends of tubes. One type is designed to flare the ends of tubes against a tube sheet, and another to flare tube ends to mate with tube fittings. Includes punch components of FLARING TOOL, TUBE, HAND.
What is a Hose Strap Band Clamping Tool? 26 Items: A Hose Strap Band Clamping Tool (CLAMPING TOOL,STRAP BAND,HOSE) is an item designed to tension and lock metal straps around a rubber hose, and the like. It is also used to clamp and hold fittings therein.
What is a Mechanical Puller? 3073 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 470 Items
What is a Slip Joint Pliers? 84 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Brake Repair Pliers? 14 Items: A Brake Repair Pliers (PLIERS,BRAKE REPAIR) is a tool having jaws designed for use in brake repair operations, such as removing and replacing items such as keys, springs, and the like. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 226 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 12 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 81 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 56 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 15 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 11 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 29 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Cross Tip Screwdriver Set? 14 Items: A Cross Tip Screwdriver Set (SCREWDRIVER SET,CROSS TIP) is a group of SCREWDRIVER, CROSS TIP having different characteristics.
What is a Spanner Wrench Set? 18 Items: A Spanner Wrench Set (WRENCH SET,SPANNER) is a group of items under WRENCH, SPANNER having different characteristics.
What is a Drive Pin Punch Set? 31 Items: A Drive Pin Punch Set (PUNCH SET,DRIVE PIN) is a group of PUNCH, DRIVE PIN having different characteristics.
What is an Aligning Punch Set? 13 Items: An Aligning Punch Set (PUNCH SET,ALIGNING) is a group of PUNCH, ALIGNING having different characteristics. See also DRIFTPIN SET.
What is a Slugging Type Box Wrench Socket? 16 Items: A Slugging Type Box Wrench Socket (SOCKET,SLUGGING TYPE BOX WRENCH) is an item having a hexagonal external drive at one end, made to fit into the internal hexagonal or 12-point opening of a slugging type box wrench. The opposite end has a single-broached hexagonal opening of the same size as the external drive. The item is designed with extra thick walls to withstand the impact of sledge blows on the driving wrench.
What is a Mechanical Puller Step Plate? 44 Items: A Mechanical Puller Step Plate (STEP PLATE,MECHANICAL PULLER) is a circular disk, flanged to provide a shoulder, and designed to provide a base for the screw point of a PULLER, MECHANICAL when pulling externally mounted bearings, gears, and the like from hollow shafts or housings. It has a concentric, countersunk hole to accommodate the puller screw point.
What is a Solid Center Punch? 79 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Cable Type Ratchet Lever Puller? 20 Items: A Cable Type Ratchet Lever Puller (PULLER,RATCHET LEVER,CABLE TYPE) is an item consisting of a metal frame and ratchet lever reel to which is attached one end of a flexible cable (wire rope). The cable feeds through the fast eye in the metal frame, and may be reeved through a slip hook tackle hook. See also BINDER, LOAD; HOIST, WIRE ROPE and STRETCHER, WIRE.
What is an Electronic Equipment Tuning Wand? 18 Items: An Electronic Equipment Tuning Wand (TUNING WAND,ELECTRONIC EQUIPMENT) is a hand-held rod used in determining the adjustment of the windings of a radio frequency coil. It is made of insulating material with iron on one end and brass on the other end. By inserting the iron end in the coil, the inductance is increased and by inserting the brass end, the inductance is decreased.
What is a Combination Open End And Spanner Wrench? 14 Items: A Combination Open End And Spanner Wrench (WRENCH,OPEN END AND SPANNER,COMBINATION) is a tool having open end wrench characteristics at one end and spanner wrench features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s) at the other end.
What is a Detent Handling Tool? 187 Items: A Detent Handling Tool (HANDLING TOOL,DETENT) is a specially designed handling tool consisting of a rigid bar with a T-handle on one end. The other end is equipped with threads designed to mate the threads of a detent to facilitate inserting or extracting.
What is a Hand Material Handling Hook? 23 Items: A Hand Material Handling Hook (HOOK,MATERIAL HANDLING,HAND) is a hook whose curved end conforms to Style AP1, AP2, AP3 or AP4 of Reference Drawing Group AP. Excludes HOOK, MANHOLE COVER, HAND; HOOK, WIRE BREAKING, HAND; HOOK, ROCK CRUSHER FEEDING, HAND; HOOK, STRAINER REMOVING, HAND and HOOKS, BAG HANDLING, HAND.
What is a Magnetic Retrieving Tool? 11 Items: A Magnetic Retrieving Tool (RETRIEVING TOOL,MAGNETIC) is a hand-operated magnetic device used to locate and pick up metallic articles, such as bolts, nuts, pins, washers, and the like, in confined spaces. It may be rigid, flexible or adjustable. Excludes FINGER, MECHANICAL.
What is a Mechanical Puller Adapter? 78 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Combination Box And Open End Box Wrench? 13 Items: A Combination Box And Open End Box Wrench (WRENCH,BOX AND OPEN END BOX,COMBINATION) is a double end wrench, box and open end box, primarily designed for removing or replacing tube fittings. The opening in the open end box may be machined at an angle from the longitudinal center line of the wrench.
What is a Screw Thread Insert Inserter? 136 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Flat Tip Screwdriver Set? 48 Items: A Flat Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP) is a group of SCREWDRIVER, FLAT TIP having different characteristics.
What is a Terminal Crimping Tool Contact Positioner? 89 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 16 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is an Adjustable Wrench? 138 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 239 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 75 Items
Handle,Shovel 10 Items
What is a Socket Wrench Spanner Attachment? 88 Items: A Socket Wrench Spanner Attachment (SPANNER ATTACHMENT,SOCKET WRENCH) is an item having an adjustable or fixed span with pin, hook, or key type end that is used to fit and turn various size retaining rings, cover plates, plugs, couplings, and like parts. Usually designed to be driven by a male driver.
What is a Retaining Ring Installation Tool? 44 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Tacker? 16 Items: A Tacker is a hand-operated, hammerlike or gunlike item without a clincher, used to drive preformed connecting elements like pins, nails or staples through one object or piece of material into another. Excludes STAPLER (as modified).
What is a Bearing And Bushing Inserter? 290 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 207 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 939 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 14 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 93 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 161 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 94 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 141 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 53 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Six Point Tip Screwdriver? 155 Items: A Six Point Tip Screwdriver (SCREWDRIVER,SIX POINT TIP) is a manual screwdriver having a single nonremoveable blade having a tip with six rounded points.
What is a Seal Inserter And Remover? 147 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 478 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is a Preformed Packing Inserter And Remover? 34 Items: A Preformed Packing Inserter And Remover (INSERTER AND REMOVER,PREFORMED PACKING) is a hand tool designed to install and remove a PACKING, PREFORMED.
What is a Pin Remover? 34 Items: A Pin Remover (REMOVER,PIN) is a hand tool designed to facilitate the removal of a pin from a hole.
What is a Pin Inserter And Remover? 13 Items: A Pin Inserter And Remover (INSERTER AND REMOVER,PIN) is a rodlike tool designed to facilitate the insertion and removal of a pin from a hole.
What is an Electrical Contact Inserter And Remover? 37 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Piston Inserter? 40 Items: A Piston Inserter (INSERTER,PISTON) is a tool designed to permit installation of a piston or piston assembly without damaging the packings or piston.
What is a Spring Inserter And Remover? 85 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 13 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Stud Inserter? 22 Items: A Stud Inserter (INSERTER,STUD) is a device designed to drive in studs. It does not have any facilities for removing or extracting studs. See also INSERTER AND REMOVER, STUD.
What is a Stud Inserter And Remover? 17 Items: A Stud Inserter And Remover (INSERTER AND REMOVER,STUD) is a group of items designed to extract and to drive studs. It may include collets, guides, housings, holders and the like. See also REMOVER SET, STUD and INSERTER, STUD.
What is a Gear Inserter? 54 Items: A Gear Inserter (INSERTER,GEAR) is a hand tool designed to install various gears onto a gearshaft. It may be operated by a pushing or a striking force.
What is a Crimping Tool Die? 73 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is an Electrical Connector Inserter? 45 Items: An Electrical Connector Inserter (INSERTER,ELECTRICAL CONNECTOR) is a hand tool designed to hold an electrical connector, and to assist in the positioning and installation of the connector on a cover, panel or the like.
What is a Float? 12 Items: A Float is a tool used for concrete, plastering and grouting work.
What is a Mechanical Puller Set? 19 Items: A Mechanical Puller Set (PULLER SET,MECHANICAL) is two or more separate PULLER, MECHANICAL of different fixed sizes.
What is a Lifting Pneumatic Bag? 11 Items: A Lifting Pneumatic Bag (PNEUMATIC BAG,LIFTING) is a device made of flexible material designed to lift another item by being placed under the item and being inflated with air or some other gas. It will have a means of being connected to an air or gas source and may include a connector hose, a control valve and/or a pressure regulator.
What is a Cable Tie Installation Tool? 22 Items: A Cable Tie Installation Tool (INSTALLATION TOOL,CABLE TIE) is a lightweight, hand-held, hand-operated tool designed to fasten cable ties, straps and the like. Cable tie is inserted into the nose of the tool flush to the cable tie head. Trigger handle tightens cable tie and cuts off any excess. These installation tools are available in a variety of sizes depending on their intended use with miniature, intermediate, standard, heavy or extra heavy cross section ties.
What is a Bearing Staking Installation Tool? 159 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
Wrench Set,Ratchet 15 Items
What is a Sealant Dispenser? 26 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Retaining Ring Pliers Set? 10 Items: A Retaining Ring Pliers Set (PLIERS SET,RETAINING RING) is a group of PLIERS, RETAINING RING having different characteristics.
What is a Hand Armament Subsystem Carrier? 52 Items: A Hand Armament Subsystem Carrier (CARRIER,ARMAMENT SUBSYSTEM,HAND) is a metallic item with a clamp device and/or space for depositing articles. It is used for transporting weapon parts during maintanence and/or repair work, such as gun barrel, automatic loader, breechblock and the like.
What is a Ring Retaining Pliers Tip Set? 13 Items: A Ring Retaining Pliers Tip Set (TIP SET,PLIERS,RING RETAINING) is a collection of removable metallic tips in matched pairs used to provide various size capablities to PLIERS, RING RETAINING which permits the removal and installation of internal and external retaining rings.
What is a Plug Electrical Connector Extractor? 45 Items: A Plug Electrical Connector Extractor (EXTRACTOR,ELECTRICAL CONNECTOR,PLUG) is a hand tool designed to disassemble CONNECTOR, PLUG, ELECTRICAL from a CONNECTOR, RECEPTACLE, ELECTRICAL.
What is a Torque Wrench Adapter Set? 10 Items: A Torque Wrench Adapter Set (ADAPTER SET,TORQUE WRENCH) is tWO or more ADAPTER, TORQUE WRENCH of different sizes.
What is an Electronic Component Inserter And Remover? 79 Items: An Electronic Component Inserter And Remover (INSERTER AND REMOVER,ELECTRONIC COMPONENT) is an item which can insert or remove an electronic component package such as MICROCIRCUIT; RESISTOR, NETWORK (as modified); and the like from its mounting position or socket. Excludes INSERTER AND REMOVER, ELECTRICAL CONTACT; REMOVER, ELECTRICAL CONTACT; EXTRACTOR, ELECTRICAL CARD; EXTRACTOR, ELECTRONIC CRYSTAL UNIT; EXTRACTOR, ELECTRON TUBE.
What is an Impact Type Bit Set And Handle Screwdriver? 14 Items: An Impact Type Bit Set And Handle Screwdriver (SCREWDRIVER,BIT SET AND HANDLE,IMPACT TYPE) is an item consisting of a set of screwdriver bits and a impact driver to accommodate the bits of various types and characteristics. It is designed to transmit a strong rotating movement by the impact of a hammer blowed on the impact driver. It is used to loosen rusted or seized screws. Excludes SCREWDRIVER, BIT SET AND HANDLE.
What is a Hand Vise Jaw? 19 Items: A Hand Vise Jaw (JAW,VISE,HAND) is an item consisting of two opposing parts of a VISE, HAND. The item is moveable and able to open and close. It can hold, grasp or clamp work.
What is a Screwdriver Handle? 28 Items: A Screwdriver Handle (HANDLE,SCREWDRIVER) is an item used to accommodate various types of BIT, SCREWDRIVER. It is designed to rotate a bit that is used for installing or removing screws.
What is a Wire Twister Pliers? 25 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 284 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is a Mechanical Puller Body? 45 Items: A Mechanical Puller Body (BODY,PULLER,MECHANICAL) is an item designed to support and enclose the internal parts of a PULLER,MECHANICAL.
What is a Flat Tip And Cross Tip Screwdriver Set? 39 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is a Socket Wrench Screwdriver Attachment Set? 22 Items: A Socket Wrench Screwdriver Attachment Set (SCREWDRIVER ATTACHMENT SET,SOCKET WRENCH) is a set of screwdriver attachment, socket wrench of different sizes. Items consist of a female square drive on one end to attach to a handle, socket wrench and various screwdriver tip configurations on the opposite end. Excludes SCREWDRIVER ATTACHMENT,SOCKET WRENCH
What is an Oil Filter Wrench? 44 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 430 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Communications Equipment Spring Adjuster? 13 Items: A Communications Equipment Spring Adjuster (ADJUSTER,SPRING,COMMUNICATIONS EQUIPMENT) is a single or double end tool, equipped with slot(s) of various dimensions or with cylindrical rod(s), used for adjusting the springs or spring tensioned parts of electronic equipment.
What is a Rotating Members Aligning Tool? 32 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
What is a Final Drive Assembly Alignment Pin? 41 Items: A Final Drive Assembly Alignment Pin (ALIGNMENT PIN,FINAL DRIVE ASSEMBLY) is a special designed pin used in the assembling of the final drive.
Arm,Handling Tool 77 Items
What is a Splicing Sleeve Compressing Tool? 23 Items: A Splicing Sleeve Compressing Tool (COMPRESSING TOOL,SPLICING SLEEVE) is a hand tool having hinged leverage handles similar to a CUTTER, BOLT or pliers, designed to compress a splicing sleeve when joining the ends of two conductors, or when forming an eye splice in the end of a wire rope. Excludes CRIMPING TOOL, TERMINAL, HAND.
What is a Hand Screw Jack Extension? 14 Items: A Hand Screw Jack Extension (EXTENSION,HAND SCREW JACK) is a length of externally threaded rigid shafting which is the adjustable section of a JACK, SCREW, HAND.
What is a Mechanical Puller Gear Adapter? 21 Items: A Mechanical Puller Gear Adapter (GEAR ADAPTER,PULLER,MECHANICAL) is an adapter that adapts a PULLER,MECHANICAL, to pull a certain gear.
Handle,Hydraulic Jack 18 Items
What is a Female Electrical Contact Resizing Tool? 11 Items: A Female Electrical Contact Resizing Tool (RESIZING TOOL,FEMALE ELECTRICAL CONTACT) is a tool designed to shape to a specific size, female contacts such as those used on electrical connectors, tube sockets, crystal sockets, and pin jacks.
What is a Screwdriver And Socket Wrench Combination? 13 Items: A Screwdriver And Socket Wrench Combination is a hand-tool formed into an integral unit with a socket wrench at one end and a screwdriver bit at the other end. See also SCREWDRIVER AND WRENCH ASSEMBLY.
What is a Hand Hose Fitting Swaging Tool Kit? 11 Items: A Hand Hose Fitting Swaging Tool Kit (SWAGING TOOL KIT,HOSE FITTING,HAND) is a device, hydraulically actuated by hand or power operated pump, consisting of face plate, adapter plate, finger cages, fingers, ram, bushing, and expanding mandrels combined on a single base in various functional arrangements. It is used for swaging the outside diameter of hose assembly fittings, expanding the inside diameter of hose assemblies, and securing the fabrication of hose assemblies. Included are a hand or power operated pump, lubricant, cases, and trays.
What is a Catch Lever Tool? 12 Items: A Catch Lever Tool (LEVER TOOL,CATCH) is a specially designed hand tool which engages the opening and closing lever of a CATCH (as modified) for ease of operation. It is constructed of thin rigid material, usually flat, and one end has an engaging tongue.
What is a Manual Impact Wrench? 11 Items: A Manual Impact Wrench (WRENCH,IMPACT,MANUAL) is a manually operated handheld tool consisting of spring-loaded handle and a power-impact head which delivers a torsional impact from either continuous movement of the handle in one direction, or by a reciprocating action. It is used in tightening and loosening fasteners, such as bolts, nuts, and the like. The item may include sockets, extensions and offset fittings, nut runners, and the like.
What is a Drift? 63 Items: A Drift is an item consisting of a tubular body fitted with replaceable tips. It is designed to insert or remove mechanical components where space is restricted.
What is a Nutdriver? 46 Items: A Nutdriver is a non-powered hand tool with a screwdriver style handle, shaft and formed female hex or square socket at driving end.
What is a Locking Device Removal Tool? 12 Items: A Locking Device Removal Tool (REMOVAL TOOL,LOCKING DEVICE) is a hand tool designed to facilitate the removal of a WASHER, KEY and a LOCKING PLATE, NUT AND BOLT.
What is a Hydraulic Fitting Crimping Tool Head? 26 Items: A Hydraulic Fitting Crimping Tool Head (HEAD,CRIMPING TOOL,HYDRAULIC FITTING) is a component of a crimping tool used to compress fittings on fluid tubes. It consists of a U-shape item, in which, are mounted different sizes of DIE, CRIMPING TOOL for tubes of various diameters.
What is a Torque Screwdriver? 11 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.
What is a Special Purpose Combination Wrench? 13 Items: A Special Purpose Combination Wrench (WRENCH,COMBINATION,SPECIAL PURPOSE) is a tool having a combination of ends and facets. The ends may have open end, box or spanner characteristics. The sides may have features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s). Designed to fit specific items, not sized as standard or metric.
What is a Screwdriver Bit Holder? 56 Items: A Screwdriver Bit Holder (HOLDER,SCREWDRIVER BIT) is an attachment with a socket end for accepting male hexagon shank insert bits and a drive end for adapting to a portable power or hand tool.
What is a Telescoping Pole? 16 Items: A Telescoping Pole (POLE,TELESCOPING) is an item which is designed to be extended or compressed by the sliding of overlapping sections. This item may or may not be able to accommodate an extension.

Stock Items From Supply Class 5120 Page 21 of 110

5120-14-386-1542
Mechanical Puller

143861542
6801J32-1028-20: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-340-8971
Box Wrench

143408971
9970-115-587: RNCC: 3 | RNVC: 2

14 Feb 1977

5120-14-406-2507
Mechanical Puller

144062507
341A98-2009-02: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-442-8467
Driftpin

144428467
4178-146-000: RNCC: 3 | RNVC: 2
4178-146-000: RNCC: 5 | RNVC: 2

7 Nov 1990

5120-14-510-0250
Crimping Tool Die

145100250
NO PRIMARY REF14-510-0250: RNCC: 3 | RNVC: 2
620366: RNCC: 5 | RNVC: 9
5120AA2015499: RNCC: 6 | RNVC: 9

4 Nov 1998

5120-14-294-0786
Socket Wrench

142940786
21143-10-15: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-301-0957
Mechanical Puller

143010957
330A93-3405-01: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-526-9227
Jaw Cable Grip

145269227
YY300818: RNCC: 3 | RNVC: 9
YY300818: RNCC: 5 | RNVC: 9

18 Sep 2001

5120-14-373-6757
Socket Wrench

143736757
199403: RNCC: 3 | RNVC: 2

13 Nov 1981

5120-14-289-8462
Crimping Tool Die

142898462
47806-2: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-399-3365
Seal Inserter

143993365
MGF373-26: RNCC: 3 | RNVC: 2

6 Mar 1985

5120-14-476-3047
Seal Inserter

144763047
9998039-3: RNCC: 3 | RNVC: 2
9998039: RNCC: 3 | RNVC: 2
RAB3861: RNCC: 5 | RNVC: 2
9998039: RNCC: 5 | RNVC: 9

6 Jun 1995

5120-14-465-4638
Seal Inserter

144654638
851-500-062-0: RNCC: 3 | RNVC: 2

30 Sep 1993

5120-14-260-0368
Socket Wrench

142600368
321-95-0032-00: RNCC: 3 | RNVC: 2
08-417: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-413-3176
Box Wrench

144133176
50.69: RNCC: 3 | RNVC: 2
3148511069509: RNCC: 5 | RNVC: 2
50-69: RNCC: 5 | RNVC: 2
0106950: RNCC: 5 | RNVC: 9

26 Nov 1986

5120-14-413-3175
Box Wrench

144133175
50.59: RNCC: 3 | RNVC: 2
3148511068502: RNCC: 5 | RNVC: 2
50-59: RNCC: 5 | RNVC: 2
0106850: RNCC: 5 | RNVC: 9

26 Nov 1986

5120-14-508-2087
Drill Guide

145082087
09-1060-100: RNCC: 3 | RNVC: 2
09-1060-100: RNCC: 5 | RNVC: 2

31 Aug 1998

5120-14-405-0844
Socket Wrench

144050844
91.12X13: RNCC: 3 | RNVC: 2
3059002200: RNCC: 5 | RNVC: 2
3148511275405: RNCC: 5 | RNVC: 2
91-12X13: RNCC: 5 | RNVC: 2
0127540: RNCC: 5 | RNVC: 9

20 Nov 1985

5120-14-337-5395
Socket Wrench Set

143375395
92-3-2A38: RNCC: 3 | RNVC: 2

7 Oct 1976

5120-14-365-9733
Seal Inserter

143659733
366A93-3211-00: RNCC: 3 | RNVC: 2

4 Nov 1980

5120-14-441-2300
Socket Wrench

144412300
6804G33-0030-20: RNCC: 3 | RNVC: 2

22 Aug 1990

5120-14-357-9633
Mechanical Puller

143579633
330A93-2023-00: RNCC: 3 | RNVC: 2

20 Jul 1979

5120-14-201-5667
Scratch Awl

142015667
NO PRIMARY REF14-201-5667: RNCC: 3 | RNVC: 2
108-10M: RNCC: 5 | RNVC: 9

1 Jan 1962

5120-14-303-0574
Box Wrench

143030574
55.27X29: RNCC: 3 | RNVC: 2
105N27X29: RNCC: 3 | RNVC: 2
111-27X29: RNCC: 3 | RNVC: 9
3148511112809: RNCC: 5 | RNVC: 2
55-27X29: RNCC: 5 | RNVC: 2
0713 305 279: RNCC: 5 | RNVC: 2
0111280: RNCC: 5 | RNVC: 9
DEM111-27X29: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-332-9839
Box Wrench

143329839
106-11X13: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-420-2439
Driftpin

144202439
306209-1: RNCC: 3 | RNVC: 2
0-306209-1: RNCC: 5 | RNVC: 2

25 Nov 1987

5120-14-388-5253
Mechanical Puller

143885253
NO PRIMARY REF14-388-5253: RNCC: 3 | RNVC: 2
0049-247: RNCC: 5 | RNVC: 2
0049-247: RNCC: 5 | RNVC: 9

3 Nov 1983

5120-14-392-0499
Mechanical Puller

143920499
MGB448-21: RNCC: 3 | RNVC: 2

21 Mar 1984

5120-14-548-4022
Hand Hydraulic Jack

145484022
P2071: RNCC: 3 | RNVC: 2

12 Jan 2006

5120-14-235-6250
Mechanical Puller

142356250
722174: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-468-7378
Driftpin

144687378
PM1A711240012: RNCC: 3 | RNVC: 2
PM1A711240012: RNCC: 5 | RNVC: 2

16 Mar 1994

5120-14-468-9840
Mechanical Puller

144689840
40N108379-2: RNCC: 3 | RNVC: 2

30 Mar 1994

5120-14-363-4656
Box Wrench

143634656
W3160M: RNCC: 3 | RNVC: 9

9 May 1980

5120-14-213-5586
Socket Wrench

142135586
91-26X27-160X10: RNCC: 3 | RNVC: 2
130025: RNCC: 5 | RNVC: 2
21348-15-07: RNCC: 5 | RNVC: 2

1 Jan 1964

5120-14-294-0721
Hand Vise

142940721
281.160: RNCC: 3 | RNVC: 2
281-160: RNCC: 5 | RNVC: 2
3148511643600: RNCC: 5 | RNVC: 2
0164360: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-513-4584
Mechanical Puller

145134584
NO PRIMARY REF14-513-4584: RNCC: 3 | RNVC: 2
NNP 5120868689081: RNCC: 5 | RNVC: 9

17 Mar 1999

5120-14-401-4077
Seal Inserter

144014077
355A93-3254-00: RNCC: 3 | RNVC: 2

5 Jun 1985

5120-14-250-8382
Open End Box Wrench

142508382
100F-19X22: RNCC: 3 | RNVC: 2
100F19X22: RNCC: 3 | RNVC: 2
3272670237124: RNCC: 5 | RNVC: 2
103-19X22: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-483-0695
Plier Clamp

144830695
504-100: RNCC: 3 | RNVC: 2
181100: RNCC: 5 | RNVC: 2

8 Aug 1996

5120-14-541-6885
Drill Drift

145416885
20501011REP.73: RNCC: 3 | RNVC: 2

17 Jun 2004

5120-14-283-6561
Screw Extractor

142836561
903-5: RNCC: 3 | RNVC: 2
2787-5: RNCC: 3 | RNVC: 2
649-11: RNCC: 3 | RNVC: 9
DEM649-11: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-465-1019
Aligning Punch

144651019
121-504-10W26H2: RNCC: 3 | RNVC: 2

14 Sep 1993

5120-14-349-0007
Hot Line Stick

143490007
CE72C: RNCC: 3 | RNVC: 2
1667W: RNCC: 5 | RNVC: 2
SYB0241: RNCC: 5 | RNVC: 2
85-689-4799: RNCC: 6 | RNVC: 9

19 Apr 1978

5120-14-322-5408
Box Wrench

143225408
50-27: RNCC: 3 | RNVC: 2
50.27: RNCC: 3 | RNVC: 2
3148511065303: RNCC: 5 | RNVC: 2
108-27: RNCC: 5 | RNVC: 2
3272670260764: RNCC: 5 | RNVC: 2
0106530: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-508-2086
Drill Guide

145082086
09-1070-200: RNCC: 3 | RNVC: 2
09-1070-200: RNCC: 5 | RNVC: 2

31 Aug 1998

5120-14-472-3895
Hand Hammer

144723895
861A.26: RNCC: 3 | RNVC: 2
3148512091622: RNCC: 5 | RNVC: 2
861A26: RNCC: 5 | RNVC: 2
0209162: RNCC: 5 | RNVC: 9

19 Oct 1994

5120-14-443-9350
Box Wrench

144439350
GS102-09: RNCC: 3 | RNVC: 2

13 Dec 1990

5120-14-396-1742
Mechanical Puller

143961742
211382: RNCC: 3 | RNVC: 2

27 Nov 1984

5120-14-410-0498
Mechanical Puller

144100498
851-200-123-0: RNCC: 3 | RNVC: 2

4 Jun 1986

5120-14-316-5573
Mechanical Puller

143165573
321A97-3124-00: RNCC: 3 | RNVC: 2
321-97-3124-00: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-490-0181
Aligning Punch

144900181
J05791-03-1000P034: RNCC: 3 | RNVC: 2

8 Sep 1997

5120-14-451-5109
Mechanical Puller

144515109
540426: RNCC: 3 | RNVC: 2

21 Nov 1991

5120-14-551-4666
Driftpin

145514666
995 031100 000: RNCC: 3 | RNVC: 2

27 Sep 2006

5120-14-540-8526
Trowel

145408526
6012140101: RNCC: 3 | RNVC: 2
3303806012022: RNCC: 5 | RNVC: 2

23 Apr 2004

5120-14-461-6875
Socket Wrench

144616875
74.T9: RNCC: 3 | RNVC: 2
3148511195406: RNCC: 5 | RNVC: 2
0715 33 03: RNCC: 5 | RNVC: 2

22 Mar 1993

5120-14-354-9337
Socket Wrench

143549337
MUP5021: RNCC: 3 | RNVC: 2

20 Feb 1979

5120-14-509-0707
Oil Filter Wrench

145090707
D.155: RNCC: 3 | RNVC: 2
0019785: RNCC: 5 | RNVC: 2
D155: RNCC: 5 | RNVC: 2

20 Oct 1998

5120-14-507-6103
Mechanical Puller

145076103
U.53J1: RNCC: 3 | RNVC: 2
0522660: RNCC: 5 | RNVC: 2

29 Jul 1998

5120-14-432-1271
Mechanical Puller

144321271
853-290-125-0: RNCC: 3 | RNVC: 2

24 May 1989

5120-14-378-3387
Plier Clamp

143783387
P1: RNCC: 3 | RNVC: 9
P1: RNCC: 5 | RNVC: 2

20 Jul 1982

5120-14-322-9745
Driftpin

143229745
121E94-234-40-0: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-274-7897
Rubber Mallet

142747897
207-60: RNCC: 3 | RNVC: 2
SYB0309: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-275-8938
Trowel

142758938
E75508-160: RNCC: 2 | RNVC: 2
E75-508-160: RNCC: 5 | RNVC: 2
2695 940 016: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-542-9450
Nutdriver

145429450
8080001: RNCC: 3 | RNVC: 2
8080001: RNCC: 5 | RNVC: 2

14 Aug 2004

5120-14-545-9170
Ratchet Wrench

145459170
61368982: RNCC: 3 | RNVC: 2

27 May 2005

5120-14-552-3117
Socket Wrench

145523117
B.J21R2A: RNCC: 3 | RNVC: 2

12 Dec 2006

5120-14-478-2964
Hand Hammer

144782964
93209: RNCC: 3 | RNVC: 2

20 Oct 1995

5120-14-334-0566
Socket Wrench

143340566
F0194P1: RNCC: 3 | RNVC: 2

23 Apr 1976

5120-14-410-6335
Seal Inserter

144106335
P4-2: RNCC: 3 | RNVC: 2
P4-2: RNCC: 5 | RNVC: 9

9 Jul 1986

5120-14-249-3939
Mechanical Puller

142493939
3210-95-38-010: RNCC: 3 | RNVC: 2
08-295: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-517-5085
Box Wrench

145175085
GS146-16X17: RNCC: 3 | RNVC: 2
1.70.1910: RNCC: 5 | RNVC: 2

3 Jan 2000

5120-14-516-7998
Mechanical Puller

145167998
5000260822: RNCC: 3 | RNVC: 2

18 Oct 1999

5120-14-344-9023
Mechanical Puller

143449023
T34BBC17A: RNCC: 3 | RNVC: 2

9 Sep 1977

5120-14-388-6645
Tack Claw

143886645
PIEDDEBICHECHAINEM0UILLAGE: RNCC: 3 | RNVC: 2

3 Nov 1983

5120-14-200-9840
Box Wrench

142009840
65-3-8X7-16: RNCC: 3 | RNVC: 2

1 Jan 1962

5120-14-308-9245
Mechanical Puller

143089245
188451: RNCC: 3 | RNVC: 2
20-0486: RNCC: 5 | RNVC: 2

1 Jan 1974

5120-14-413-5654
Mechanical Puller

144135654
R18-15EXTRACTEURROULEMENTREP5: RNCC: 3 | RNVC: 2

17 Dec 1986

5120-14-439-6404
Gear Inserter

144396404
6801G32-2241-20: RNCC: 3 | RNVC: 2

16 May 1990

5120-14-398-8019
Socket Wrench

143988019
5000254258: RNCC: 3 | RNVC: 2
5000254258: RNCC: 5 | RNVC: 9

20 Feb 1985

5120-14-317-0554
Hand Screw Jack

143170554
160-888425: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-485-7668
Oil Filter Wrench

144857668
712041-99: RNCC: 3 | RNVC: 2
SYB2023: RNCC: 5 | RNVC: 2

12 Feb 1997

5120-14-235-6959
Box Wrench

142356959
21453: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-522-2428
Drive Pin Punch

145222428
TC3030G001: RNCC: 3 | RNVC: 2

11 Oct 2000

5120-14-338-0141
Hot Line Stick

143380141
12100957: RNCC: 3 | RNVC: 2

6 Nov 1976

5120-14-249-9495
Socket Wrench

142499495
1110: RNCC: 3 | RNVC: 2
720731: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-539-7799
Aligning Punch

145397799
725790-002: RNCC: 3 | RNVC: 2

6 Feb 2004

5120-14-435-0739
Seal Inserter

144350739
853-290-022-0: RNCC: 3 | RNVC: 2

18 Oct 1989

5120-14-406-6563
Mechanical Puller

144066563
853-200-831-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-446-1006
Mechanical Puller

144461006
853-203-088-0: RNCC: 3 | RNVC: 2

6 Mar 1991

5120-14-237-9832
Hand Hammer

142379832
M0B220-18X20: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-458-0146
Digging Bar

144580146
0152150604: RNCC: 3 | RNVC: 2
1123-150: RNCC: 3 | RNVC: 2
2403065: RNCC: 5 | RNVC: 2

2 Oct 1992

5120-14-321-5284
Marlinespike

143215284
SA0084-200: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-450-2176
Mechanical Puller

144502176
6121-6: RNCC: 3 | RNVC: 9
91604614: RNCC: 5 | RNVC: 2
MUL6121-6: RNCC: 5 | RNVC: 9

25 Sep 1991

5120-14-280-6610
Box Wrench

142806610
903: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-433-3317
Mechanical Puller

144333317
541339: RNCC: 3 | RNVC: 2
00541339: RNCC: 5 | RNVC: 2

19 Jul 1989

5120-14-457-9875
Drill Guide

144579875
537541: RNCC: 3 | RNVC: 2

2 Oct 1992

5120-14-457-9869
Drill Guide

144579869
537442: RNCC: 3 | RNVC: 2

2 Oct 1992

5120-14-409-3076
Mechanical Puller

144093076
DLP752580: RNCC: 3 | RNVC: 2

27 May 1986

5120-14-295-1780
Drive Pin Punch

142951780
000634005P: RNCC: 3 | RNVC: 2
2087: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-251-9637
Socket Wrench

142519637
NO PRIMARY REF14-251-9637: RNCC: 3 | RNVC: 2
74275-12: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-210-9894
Hand Hammer

142109894
786: RNCC: 3 | RNVC: 2

1 Jan 1964

5120-14-249-9430
Box Wrench

142499430
62-26X28: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-237-9808
Pin Vise

142379808
4377-100: RNCC: 3 | RNVC: 9

1 Jan 1967

5120-14-377-7650
Hand Hammer

143777650
MASE400: RNCC: 3 | RNVC: 2
74754-400: RNCC: 5 | RNVC: 9
MAS-E400: RNCC: 5 | RNVC: 9
MASE400: RNCC: 5 | RNVC: 9

10 Jun 1982

5120-14-338-3667
Box Wrench

143383667
GSM171-264F3: RNCC: 3 | RNVC: 2
A0289-003F6: RNCC: 5 | RNVC: 2

6 Nov 1976

5120-14-400-4655
Hand Hammer

144004655
0204320301: RNCC: 3 | RNVC: 2
204-32EC: RNCC: 3 | RNVC: 2

24 Apr 1985

5120-14-402-9000
Driftpin

144029000
NO PRIMARY REF14-402-9000: RNCC: 3 | RNVC: 2
M4ZS660D1713: RNCC: 5 | RNVC: 2

25 Jul 1985

5120-14-437-3938
Seal Inserter

144373938
853-202-982-0: RNCC: 3 | RNVC: 2

31 Jan 1990

5120-14-401-4111
Box Wrench

144014111
332A93-3214-20: RNCC: 3 | RNVC: 2

5 Jun 1985

5120-14-313-7298
Mechanical Puller

143137298
NO PRIMARY REF14-313-7298: RNCC: 3 | RNVC: 2
147000-78: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-285-2320
Hand Hammer

142852320
127-1750EC: RNCC: 3 | RNVC: 2
MASSEENFERSAGA3: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-555-5129
Hand Hammer

145555129
62057353AA: RNCC: 3 | RNVC: 2

22 Nov 2007

5120-14-424-9756
Jeweler's Vise

144249756
2021: RNCC: 3 | RNVC: 2
2021: RNCC: 5 | RNVC: 2
85-693-7376: RNCC: 6 | RNVC: 9

16 Jun 1988

5120-14-511-6903
Mechanical Puller

145116903
53000400000: RNCC: 3 | RNVC: 2
KW004: RNCC: 5 | RNVC: 2

11 Jan 1999

5120-14-552-8547
Ratchet Wrench

145528547
K.152PB: RNCC: 3 | RNVC: 2
3148516760432: RNCC: 5 | RNVC: 2

8 Feb 2007

5120-14-392-0531
Box Wrench

143920531
MHC459-21: RNCC: 3 | RNVC: 2

21 Mar 1984

5120-14-385-3484
Mechanical Puller

143853484
6807P32-6003-00: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-532-3883
Seal Inserter

145323883
MFG604-22: RNCC: 3 | RNVC: 2

30 Oct 2002

5120-14-484-6508
Box Wrench

144846508
59.8X9: RNCC: 3 | RNVC: 2
3148511138601: RNCC: 5 | RNVC: 2
59-8X9: RNCC: 5 | RNVC: 2
0113860: RNCC: 5 | RNVC: 2

28 Nov 1996

5120-14-401-7487
Trowel

144017487
NO PRIMARY REF14-401-7487: RNCC: 3 | RNVC: 2
2695 941 024: RNCC: 5 | RNVC: 2
986-14FACONSREIMS: RNCC: 5 | RNVC: 9

13 Jun 1985

5120-14-237-9554
Drill Guide

142379554
0210920: RNCC: 3 | RNVC: 2
885.G7: RNCC: 5 | RNVC: 2
885G7: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-541-5923
Open End Box Wrench

145415923
70A.15-16: RNCC: 3 | RNVC: 2

10 Jun 2004

5120-14-526-0285
Mechanical Puller

145260285
21407853-2: RNCC: 3 | RNVC: 2

28 Jun 2001

5120-14-424-6663
Pipe Wrench

144246663
138.30: RNCC: 3 | RNVC: 2
3148511373804: RNCC: 5 | RNVC: 2
1028471B00: RNCC: 5 | RNVC: 2
91690500: RNCC: 5 | RNVC: 2
FACOM 138-30: RNCC: 5 | RNVC: 2
0137380: RNCC: 5 | RNVC: 9
958 233 000 001: RNCC: 6 | RNVC: 9

2 Jun 1988

5120-14-368-9288
Box Wrench

143689288
4147064: RNCC: 3 | RNVC: 2
BP4147-064: RNCC: 5 | RNVC: 2
5120-A1-000-0020: RNCC: 6 | RNVC: 9

10 Mar 1981

5120-14-441-2349
Mechanical Puller

144412349
6816V32-2666-00: RNCC: 3 | RNVC: 2

22 Aug 1990

5120-14-307-8803
Mechanical Puller

143078803
330A98-3115-00: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-301-0972
Mechanical Puller

143010972
330A98-2126-00: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-445-7595
Seal Inserter

144457595
86145913300: RNCC: 3 | RNVC: 2
360728-00: RNCC: 5 | RNVC: 2

25 Feb 1991

5120-14-468-7379
Driftpin

144687379
PM1A711240012A1: RNCC: 3 | RNVC: 2
PM1A711240012A1: RNCC: 5 | RNVC: 2

16 Mar 1994

5120-14-533-1415
Seal Inserter

145331415
888-452-009-0: RNCC: 3 | RNVC: 2

23 Jan 2003

5120-14-298-7841
Trowel

142987841
E75-108-200: RNCC: 2 | RNVC: 2
2695 941 020: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-329-6385
Box Wrench

143296385
MHC229-23: RNCC: 3 | RNVC: 2
MHC229-23: RNCC: 5 | RNVC: 2

2 Jul 1975

5120-14-546-6696
Hot Line Stick

145466696
TP 12: RNCC: 3 | RNVC: 2

28 Jul 2005

5120-14-532-2421
Drive Pin Punch

145322421
7E2A: RNCC: 3 | RNVC: 2

23 Oct 2002

5120-14-392-0854
Socket Wrench

143920854
853-100-124-0: RNCC: 3 | RNVC: 2

21 Mar 1984

5120-14-434-3256
Seal Inserter

144343256
EMH141378AM: RNCC: 3 | RNVC: 2
EMH141378AM: RNCC: 5 | RNVC: 9

20 Sep 1989

5120-14-275-8966
Swivel Bench Hook

142758966
08-1P357REP2: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-286-3679
Pipe Vise And Stand

142863679
2006-0: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-401-7491
Trowel

144017491
NO PRIMARY REF14-401-7491: RNCC: 3 | RNVC: 2
603-16: RNCC: 5 | RNVC: 9

13 Jun 1985

5120-14-420-2037
Pike Pole

144202037
3984-906-907: RNCC: 3 | RNVC: 2
27204000: RNCC: 5 | RNVC: 9
2720: RNCC: 5 | RNVC: 9

25 Nov 1987

5120-14-471-1629
Open End Box Wrench

144711629
42.10X12: RNCC: 3 | RNVC: 2
42.10X12: RNCC: 5 | RNVC: 2
3148511016350: RNCC: 5 | RNVC: 2
42-10X12: RNCC: 5 | RNVC: 2
91639871: RNCC: 5 | RNVC: 2
CAE00885: RNCC: 5 | RNVC: 2
0714 231 011: RNCC: 5 | RNVC: 2
0101635: RNCC: 5 | RNVC: 9

3 Aug 1994

5120-14-466-3815
Mechanical Puller

144663815
62AM007: RNCC: 3 | RNVC: 2

3 Nov 1993

5120-14-301-1452
Mechanical Puller

143011452
8810600159: RNCC: 3 | RNVC: 2
A26-77: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-360-0623
Box Wrench

143600623
9970-121-181: RNCC: 3 | RNVC: 2

31 Oct 1979

5120-14-421-1563
Hand Hydraulic Jack

144211563
NO PRIMARY REF14-421-1563: RNCC: 3 | RNVC: 2
2000020: RNCC: 5 | RNVC: 9

6 Jan 1988

5120-14-460-6144
Seal Inserter

144606144
NO PRIMARY REF14-460-6144: RNCC: 3 | RNVC: 2
816100: RNCC: 5 | RNVC: 9

4 Feb 1993

5120-14-549-8373
Mechanical Puller

145498373
6801U33-640-052: RNCC: 3 | RNVC: 2

16 May 2006

5120-14-232-0891
Socket Wrench

142320891
94.7: RNCC: 3 | RNVC: 2
101790: RNCC: 5 | RNVC: 2
3148511287705: RNCC: 5 | RNVC: 2
94-7: RNCC: 5 | RNVC: 2
91399381: RNCC: 5 | RNVC: 2
0128770: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-473-4380
Box Wrench

144734380
4A-670-21-W26H2: RNCC: 3 | RNVC: 2

31 Dec 1994

5120-14-274-8178
Pipe Wrench

142748178
132-60: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-237-4734
Mechanical Puller

142374734
3130-98-04-200-1: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-325-4061
Socket Wrench

143254061
7692-7194: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-210-9839
Socket Wrench

142109839
80-46P: RNCC: 3 | RNVC: 2
3107246: RNCC: 3 | RNVC: 2
122-46: RNCC: 3 | RNVC: 9
80-46: RNCC: 5 | RNVC: 2
SYQ0751: RNCC: 5 | RNVC: 2
DEM122-46: RNCC: 5 | RNVC: 9
VIR3107246: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-517-3797
Mechanical Puller

145173797
0XB101-682-000-18: RNCC: 3 | RNVC: 2

8 Dec 1999

5120-14-319-4543
Drill Drift

143194543
3130S98-03-016: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-306-3716
Socket Wrench

143063716
NO PRIMARY REF14-306-3716: RNCC: 3 | RNVC: 2
RT4962: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-343-9657
Open End Box Wrench

143439657
37-27X30: RNCC: 3 | RNVC: 2
85-647-3340: RNCC: 6 | RNVC: 9

13 Jul 1977

5120-14-472-3907
Plier Wrench

144723907
0181735: RNCC: 3 | RNVC: 2
513-9: RNCC: 5 | RNVC: 2
513.9: RNCC: 5 | RNVC: 2

19 Oct 1994

5120-14-526-2567
Ratchet Wrench

145262567
68B.5/8X11/16: RNCC: 3 | RNVC: 2
3148511162972: RNCC: 5 | RNVC: 2

11 Jul 2001

5120-14-349-1151
Hand Hammer

143491151
200A.50: RNCC: 3 | RNVC: 2
3148511463604: RNCC: 5 | RNVC: 2
2695 502 150: RNCC: 5 | RNVC: 2
200A50: RNCC: 5 | RNVC: 2
0146360: RNCC: 5 | RNVC: 9
200-50: RNCC: 5 | RNVC: 9

19 Apr 1978

5120-14-204-9261
Socket Wrench

142049261
56-14X17: RNCC: 3 | RNVC: 2
140488B: RNCC: 3 | RNVC: 2
140488A: RNCC: 5 | RNVC: 9
140488B: RNCC: 5 | RNVC: 9

1 Jan 1963

5120-14-287-2253
Mechanical Puller

142872253
153822: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-542-5963
Seal Inserter

145425963
484866: RNCC: 3 | RNVC: 2

21 Jul 2004

5120-14-385-3416
Mechanical Puller

143853416
6802P32-1684-01: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-264-7906
Socket Wrench

142647906
MAT196-0066F8: RNCC: 3 | RNVC: 2
GSM196-11F10: RNCC: 5 | RNVC: 2
GSM196-011F10: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-274-8491
Machinist's Vise

142748491
4325-120: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-307-3557
Box Wrench

143073557
100-12X14: RNCC: 3 | RNVC: 2
100-12X14: RNCC: 3 | RNVC: 2
3272670216570: RNCC: 5 | RNVC: 2
85-686-2563: RNCC: 6 | RNVC: 9

1 Jan 1974

5120-14-463-9778
Aligning Punch

144639778
854-500-330-0: RNCC: 3 | RNVC: 2

7 Jul 1993

5120-14-269-2332
Box Wrench

142692332
50.82: RNCC: 3 | RNVC: 2
108-82: RNCC: 3 | RNVC: 2
119-82: RNCC: 3 | RNVC: 9
3148511070802: RNCC: 5 | RNVC: 2
50-82: RNCC: 5 | RNVC: 2
3272670235243: RNCC: 5 | RNVC: 2
DEM119-82: RNCC: 5 | RNVC: 9
0107080: RNCC: 5 | RNVC: 9

1 Jan 1970

5120-14-551-0078
Mechanical Puller

145510078
OM1-97245: RNCC: 3 | RNVC: 2

18 Aug 2006

5120-14-417-7664
Mechanical Puller

144177664
U.302: RNCC: 3 | RNVC: 2
3148510751559: RNCC: 5 | RNVC: 2
300-6231: RNCC: 5 | RNVC: 2
U302: RNCC: 5 | RNVC: 2
0075155: RNCC: 5 | RNVC: 9
FACOMU.302: RNCC: 5 | RNVC: 9

22 Jul 1987

5120-14-214-2929
Driftpin

142142929
60-40-09-D: RNCC: 3 | RNVC: 2
604009: RNCC: 5 | RNVC: 2
604009D: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-351-9449
Box Wrench

143519449
99006-22000: RNCC: 3 | RNVC: 2
99006-22000: RNCC: 5 | RNVC: 2

16 Oct 1978

5120-14-387-3843
Driftpin

143873843
9970-146-537: RNCC: 3 | RNVC: 2

15 Sep 1983

5120-14-386-1534
Mechanical Puller

143861534
6801F33-5163-20: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-416-8719
Hand Rivet Set

144168719
NO PRIMARY REF14-416-8719: RNCC: 3 | RNVC: 2
0U140705: RNCC: 5 | RNVC: 9
OU140705: RNCC: 5 | RNVC: 9

25 Jun 1987

5120-14-443-9281
Pipe Wrench

144439281
45675690: RNCC: 3 | RNVC: 2
45675690-REV A: RNCC: 5 | RNVC: 2
45675690: RNCC: 5 | RNVC: 9
45675690-REV A: RNCC: 5 | RNVC: 9

12 Dec 1990

5120-14-463-1812
Hand Scissors Jack

144631812
6725-61: RNCC: 3 | RNVC: 2
ZF07569719: RNCC: 3 | RNVC: 2
7569719: RNCC: 5 | RNVC: 2

26 May 1993

5120-14-314-1564
Box Wrench

143141564
55.16X17: RNCC: 3 | RNVC: 2
105N16X17: RNCC: 3 | RNVC: 2
111-16X17: RNCC: 3 | RNVC: 9
0713 305 167: RNCC: 5 | RNVC: 2
3148511110409: RNCC: 5 | RNVC: 2
55-16X17: RNCC: 5 | RNVC: 2
DEM111-16X17: RNCC: 5 | RNVC: 9
0111040: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-452-0713
Aligning Punch

144520713
4EM11348300: RNCC: 3 | RNVC: 2
91729476: RNCC: 5 | RNVC: 2

18 Dec 1991

5120-14-509-8362
Box Wrench

145098362
0D2L29: RNCC: 3 | RNVC: 2
5120AA1016913: RNCC: 6 | RNVC: 9

4 Nov 1998

5120-14-461-2740
Seal Inserter

144612740
1463: RNCC: 3 | RNVC: 2
5000261463: RNCC: 5 | RNVC: 2

3 Mar 1993

5120-14-369-1876
Mechanical Puller

143691876
365A93-4146-00: RNCC: 3 | RNVC: 2

17 Apr 1981

5120-14-361-4917
Mechanical Puller

143614917
8812677000: RNCC: 3 | RNVC: 2
85-800-8641: RNCC: 6 | RNVC: 9

24 Jan 1980

5120-14-444-4565
Socket Wrench

144444565
231448: RNCC: 3 | RNVC: 2
85-694-3562: RNCC: 6 | RNVC: 9

9 Jan 1991

5120-14-450-3769
Gear Inserter

144503769
NO PRIMARY REF14-450-3769: RNCC: 3 | RNVC: 2
BL53967: RNCC: 5 | RNVC: 9

1 Oct 1991

5120-14-438-2501
Drive Pin Punch

144382501
BN311-545M25REP2.0: RNCC: 3 | RNVC: 2

10 Feb 1999

5120-14-442-6793
Mechanical Puller

144426793
OUT5584: RNCC: 3 | RNVC: 2
0UT5584: RNCC: 5 | RNVC: 2

24 Oct 1990

5120-14-509-8707
Pry Bar

145098707
NO PRIMARY REF14-509-8707: RNCC: 3 | RNVC: 2
S4199: RNCC: 5 | RNVC: 9
5120AA1070958: RNCC: 6 | RNVC: 9

4 Nov 1998

5120-14-433-3075
Socket Wrench

144333075
853-202-402-0: RNCC: 3 | RNVC: 2

19 Jul 1989

5120-14-412-9796
Drift Pin Set

144129796
853-202-231-0: RNCC: 3 | RNVC: 2

5 Nov 1986

5120-14-503-8295
Socket Wrench

145038295
545599: RNCC: 3 | RNVC: 2
A545599-003: RNCC: 5 | RNVC: 2

30 Jan 1998

5120-14-511-3835
Mechanical Puller

145113835
MGB093-28: RNCC: 3 | RNVC: 2
MGB093-28: RNCC: 5 | RNVC: 2

16 Dec 1998

5120-14-362-8752
Box Wrench

143628752
50.85: RNCC: 3 | RNVC: 2
108-85: RNCC: 3 | RNVC: 2
119-85: RNCC: 3 | RNVC: 9
3148511071106: RNCC: 5 | RNVC: 2
50-85: RNCC: 5 | RNVC: 2
3272670260078: RNCC: 5 | RNVC: 2
0107110: RNCC: 5 | RNVC: 9
DEM119-85: RNCC: 5 | RNVC: 9

19 Mar 1980

5120-14-282-9272
Rack Bar Jack

142829272
E52-071-10: RNCC: 2 | RNVC: 2

1 Jan 1971

5120-14-368-5810
Driftpin

143685810
14189740F: RNCC: 3 | RNVC: 2
14-18-974-0F: RNCC: 5 | RNVC: 2

20 Feb 1981

5120-14-449-0078
Lamp Extractor

144490078
16D6250: RNCC: 3 | RNVC: 9
91717601: RNCC: 5 | RNVC: 2
D1-16D6250: RNCC: 5 | RNVC: 9

24 Jul 1991

5120-14-455-0066
Rivet Bucking Bar

144550066
853-600-324-0: RNCC: 3 | RNVC: 2

1 May 1992

5120-14-420-4003
Open End Box Wrench

144204003
42.30X32: RNCC: 3 | RNVC: 2
3148511017302: RNCC: 5 | RNVC: 2
42-30X32: RNCC: 5 | RNVC: 2
BLC23086: RNCC: 5 | RNVC: 2
91637326: RNCC: 5 | RNVC: 2
0714 233 032: RNCC: 5 | RNVC: 2
0101730: RNCC: 5 | RNVC: 9

10 Dec 1987

5120-14-437-4292
Gear Inserter

144374292
16380885: RNCC: 3 | RNVC: 2
16380885: RNCC: 5 | RNVC: 9

31 Jan 1990

5120-14-347-9556
Mechanical Puller

143479556
MAS4704: RNCC: 3 | RNVC: 2

29 Mar 1978

5120-14-262-4792
Drive Pin Punch

142624792
3210-97-31-023-1: RNCC: 3 | RNVC: 2
08-425: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-235-6198
Box Wrench

142356198
17926T1REP15: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-419-2708
Driftpin

144192708
537104: RNCC: 3 | RNVC: 2

16 Oct 1987

5120-14-497-3541
Socket Wrench

144973541
91-26-27: RNCC: 3 | RNVC: 2
F300 0T 023 0487: RNCC: 6 | RNVC: 9

15 Oct 1997

5120-14-356-5642
Socket Wrench

143565642
93-17: RNCC: 3 | RNVC: 2
3272670259188: RNCC: 5 | RNVC: 2

15 May 1979

5120-14-323-2089
Box Wrench

143232089
30-3-16X1-4BSF: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-506-7425
Box Wrench

145067425
58.12X13: RNCC: 3 | RNVC: 2
58-12X13: RNCC: 3 | RNVC: 2
3148511137307: RNCC: 5 | RNVC: 2
0113730: RNCC: 5 | RNVC: 9

13 May 1998

5120-14-041-3499
Mechanical Puller

140413499
30-921-10: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-381-0072
Ratchet Wrench

143810072
HB41-5/FAB49: RNCC: 3 | RNVC: 2
HB41-5: RNCC: 5 | RNVC: 2

14 Dec 1982

5120-14-344-8879
Lamp Extractor

143448879
031751713: RNCC: 3 | RNVC: 9
7595: RNCC: 5 | RNVC: 2
AUT0401V0ZA: RNCC: 5 | RNVC: 2

9 Sep 1977

5120-14-438-7765
Mechanical Puller

144387765
330A93-3035-00: RNCC: 3 | RNVC: 2

4 Apr 1990

5120-14-271-8865
Mechanical Puller

142718865
8810003072: RNCC: 3 | RNVC: 2
881-0-003-072: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-462-8976
Gear Inserter

144628976
NO PRIMARY REF14-462-8976: RNCC: 3 | RNVC: 2
89280933: RNCC: 5 | RNVC: 2
305C26396: RNCC: 5 | RNVC: 9
305PI26396: RNCC: 5 | RNVC: 9

5 May 1993

5120-14-404-1198
Mechanical Puller

144041198
09P639: RNCC: 3 | RNVC: 2

11 Sep 1985

5120-14-411-7027
Socket Wrench

144117027
043-03-01C1: RNCC: 3 | RNVC: 2

27 Aug 1986

5120-14-427-2027
Mechanical Puller

144272027
46AM004-02: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-438-3494
Pin Inserter

144383494
330A98-7506-00: RNCC: 3 | RNVC: 2

14 Mar 1990

5120-14-485-7320
Mechanical Puller

144857320
332A93-1173-20: RNCC: 3 | RNVC: 2

6 Feb 1997

5120-14-301-0982
Mechanical Puller

143010982
330A98-3439-00: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-468-9153
Box Wrench

144689153
571002422: RNCC: 3 | RNVC: 2

28 Mar 1994

5120-14-489-3048
Mechanical Puller

144893048
10111991: RNCC: 3 | RNVC: 2

9 Jul 1997

5120-14-378-3146
Mechanical Puller

143783146
02640909700: RNCC: 3 | RNVC: 2
026409097: RNCC: 5 | RNVC: 2

20 Jul 1982

5120-14-465-7057
Seal Inserter

144657057
4100005: RNCC: 3 | RNVC: 2
4100005: RNCC: 5 | RNVC: 2

8 Oct 1993

5120-14-201-3540
Pinch Bar

142013540
NO PRIMARY REF14-201-3540: RNCC: 3 | RNVC: 2
ST30SMGCHA2-337-1200: RNCC: 5 | RNVC: 9

1 Jan 1962

5120-14-395-6924
Mechanical Puller

143956924
853-200-374-0: RNCC: 3 | RNVC: 2

30 Oct 1984

5120-14-272-7995
Mechanical Puller

142727995
NO PRIMARY REF14-272-7995: RNCC: 3 | RNVC: 2
D10-209: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-304-1782
Blacksmiths' Tongs

143041782
3811-10: RNCC: 3 | RNVC: 9

1 Jan 1974

5120-14-441-2273
Socket Wrench

144412273
6803G32-1000-00: RNCC: 3 | RNVC: 2

22 Aug 1990

5120-14-382-3299
Socket Wrench

143823299
7700541636: RNCC: 3 | RNVC: 2

17 Feb 1983

5120-14-448-6400
Socket Wrench

144486400
W-1925: RNCC: 3 | RNVC: 9
101 100-32: RNCC: 3 | RNVC: 9

4 Jul 1991

5120-14-530-2836
Mechanical Puller

145302836
U.53KL1: RNCC: 3 | RNVC: 2
3148510703626: RNCC: 5 | RNVC: 2
U53KL1: RNCC: 5 | RNVC: 2

28 May 2002

5120-14-400-1955
Mechanical Puller

144001955
332A93-3106-00: RNCC: 3 | RNVC: 2

24 Apr 1985

5120-14-449-4439
Plier Wrench

144494439
521.200: RNCC: 3 | RNVC: 2
521-200: RNCC: 5 | RNVC: 2
0695 959 20: RNCC: 5 | RNVC: 2
3148511822951: RNCC: 5 | RNVC: 2
0182295: RNCC: 5 | RNVC: 9

19 Aug 1991

5120-14-377-2872
Mechanical Puller

143772872
F46132: RNCC: 3 | RNVC: 2

17 May 1982

5120-14-416-3149
Mechanical Puller

144163149
47367A: RNCC: 3 | RNVC: 2
47367: RNCC: 5 | RNVC: 2

3 Jun 1987

5120-14-294-0711
Machinist's Vise

142940711
280-150E: RNCC: 3 | RNVC: 2
4217-150FIXE: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-274-8506
Socket Wrench

142748506
0117270: RNCC: 3 | RNVC: 2
80-25: RNCC: 3 | RNVC: 2
3107225: RNCC: 3 | RNVC: 2
122-25: RNCC: 3 | RNVC: 9
72-25: RNCC: 5 | RNVC: 2
72.25: RNCC: 5 | RNVC: 2
VIR3107225: RNCC: 5 | RNVC: 9
DEM122-25: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-352-5447
Box Wrench

143525447
0M593: RNCC: 3 | RNVC: 2
0M593: RNCC: 5 | RNVC: 2

16 Oct 1978

5120-14-202-9286
Hammer Handle

142029286
B54-521-800-25X42: RNCC: 2 | RNVC: 2

1 Jan 1963

5120-14-385-3456
Mechanical Puller

143853456
6804P32-1677-00: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-343-9815
Box Wrench

143439815
9970-115-642: RNCC: 3 | RNVC: 2
85-689-5620: RNCC: 6 | RNVC: 9

13 Jul 1977

5120-14-306-4359
Box Wrench

143064359
8810048006: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-258-1375
Mechanical Puller

142581375
NO PRIMARY REF14-258-1375: RNCC: 3 | RNVC: 2
D20-1303A24: RNCC: 5 | RNVC: 9

1 Jan 1969

5120-14-210-7344
Capstan Bar

142107344
7-140475-4: RNCC: 3 | RNVC: 2
140475: RNCC: 5 | RNVC: 9
7-140475-4: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-434-3278
Seal Inserter

144343278
EMH141378Y: RNCC: 3 | RNVC: 2
EMH141378Y: RNCC: 5 | RNVC: 9

20 Sep 1989

5120-14-265-0911
Mechanical Puller

142650911
330A98-2038-00: RNCC: 3 | RNVC: 2
330A98-2038-0000: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-519-8470
Socket Wrench

145198470
AM2214AA0-T051: RNCC: 3 | RNVC: 2

12 Apr 2000

5120-14-530-8552
Nutdriver

145308552
119080: RNCC: 3 | RNVC: 2
74.1/2: RNCC: 5 | RNVC: 2
3148511190807: RNCC: 5 | RNVC: 2

9 Jul 2002

5120-14-536-4323
Socket Wrench

145364323
132550: RNCC: 3 | RNVC: 2

5 Aug 2003

5120-14-456-8469
Seal Inserter

144568469
NO PRIMARY REF14-456-8469: RNCC: 3 | RNVC: 2
BLB85: RNCC: 5 | RNVC: 9
85-694-5935: RNCC: 6 | RNVC: 9

24 Jul 1992

5120-14-347-9495
Driftpin

143479495
MAS4712: RNCC: 3 | RNVC: 2

29 Mar 1978

5120-14-545-9283
Mechanical Puller

145459283
82074385000: RNCC: 3 | RNVC: 2

30 May 2005

5120-14-473-3518
C Clamp

144733518
PL1NB0100A500004: RNCC: 3 | RNVC: 2

13 Dec 1994

5120-14-323-5721
Socket Wrench

143235721
109336: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-249-9493
Open End Box Wrench

142499493
1114: RNCC: 3 | RNVC: 2
720732: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-375-1755
Socket Wrench

143751755
16380111: RNCC: 3 | RNVC: 2
16380111: RNCC: 5 | RNVC: 9

26 Feb 1982

5120-14-429-1538
Mechanical Puller

144291538
530526: RNCC: 3 | RNVC: 2

11 Jan 1989

5120-14-425-6848
Mechanical Puller

144256848
8813196000: RNCC: 3 | RNVC: 2

21 Jul 1988

5120-14-382-0655
Mechanical Puller

143820655
1689: RNCC: 3 | RNVC: 2
85-692-1843: RNCC: 6 | RNVC: 9

25 Jan 1983

5120-14-458-4086
Mechanical Puller

144584086
0XB501-108-000-03: RNCC: 3 | RNVC: 2

23 Oct 1992

5120-14-456-8467
Crimping Tool Die

144568467
576720: RNCC: 3 | RNVC: 2
85-694-5824: RNCC: 6 | RNVC: 9

24 Jul 1992

5120-14-379-0704
Mechanical Puller

143790704
365A93-3111-00: RNCC: 3 | RNVC: 2

6 Sep 1982

5120-14-432-7325
Seal Inserter

144327325
NO PRIMARY REF14-432-7325: RNCC: 3 | RNVC: 2
OU139372: RNCC: 5 | RNVC: 9
0U139372: RNCC: 5 | RNVC: 9

21 Jun 1989

5120-14-332-7014
Mechanical Puller

143327014
NO PRIMARY REF14-332-7014: RNCC: 3 | RNVC: 2
99400-78: RNCC: 5 | RNVC: 9

2 Jul 1975

5120-14-204-9169
Tire Iron

142049169
570002: RNCC: 3 | RNVC: 2
FUSIL57-425: RNCC: 5 | RNVC: 2
425: RNCC: 5 | RNVC: 2

1 Jan 1963

5120-14-437-4006
Mechanical Puller

144374006
M11800: RNCC: 3 | RNVC: 2

31 Jan 1990

5120-14-237-9557
Drill Guide

142379557
0210980: RNCC: 3 | RNVC: 2
885.G10: RNCC: 5 | RNVC: 2
885G10: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-537-3985
Seal Inserter

145373985
T1956: RNCC: 3 | RNVC: 2
8048827M00: RNCC: 5 | RNVC: 2

3 Nov 2003

5120-14-425-9350
Drill Guide

144259350
640272: RNCC: 3 | RNVC: 2

28 Jul 1988

5120-14-485-2066
Aligning Punch

144852066
888-426-500-1: RNCC: 3 | RNVC: 2

10 Jan 1997

5120-14-445-0090
Seal Inserter

144450090
NO PRIMARY REF14-445-0090: RNCC: 3 | RNVC: 2
807618: RNCC: 5 | RNVC: 9

31 Jan 1991

5120-14-465-4652
Seal Inserter

144654652
851-500-076-0: RNCC: 3 | RNVC: 2

30 Sep 1993

5120-14-524-8915
Drive Pin Punch

145248915
249.G3: RNCC: 3 | RNVC: 2
249.G3: RNCC: 5 | RNVC: 2

25 Apr 2001

5120-14-531-8877
Mechanical Puller

145318877
T651G3004101: RNCC: 3 | RNVC: 2

25 Sep 2002

5120-14-426-1101
Seal Inserter

144261101
8814389000: RNCC: 3 | RNVC: 2

4 Aug 1988

5120-14-395-0564
Box Wrench

143950564
8814084000: RNCC: 3 | RNVC: 2

2 Oct 1984

5120-14-254-4814
Hand Shovel

142544814
23-9665: RNCC: 3 | RNVC: 2

1 Jan 1969

5120-14-397-8781
Mechanical Puller

143978781
M10290: RNCC: 3 | RNVC: 2

31 Jan 1985

5120-14-301-1454
Box Wrench

143011454
8811309100: RNCC: 3 | RNVC: 2
C26-62: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-329-6374
Box Wrench

143296374
MHC061-21: RNCC: 3 | RNVC: 2
MH061-21: RNCC: 5 | RNVC: 2
MHC061-21-00: RNCC: 5 | RNVC: 2

2 Jul 1975

5120-14-339-0384
Socket Wrench

143390384
80900-170: RNCC: 3 | RNVC: 2
78576-72: RNCC: 5 | RNVC: 2
85-598-4771: RNCC: 6 | RNVC: 9

17 Dec 1976

5120-14-409-0877
Tire Iron

144090877
FORCE1289: RNCC: 3 | RNVC: 2

16 Apr 1986

5120-14-303-3722
Mechanical Puller

143033722
3005493: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-482-0318
Mechanical Puller

144820318
580088A: RNCC: 3 | RNVC: 2

13 Jun 1996

5120-14-264-6554
Mechanical Puller

142646554
E5E167: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-539-2751
Stud Remover

145392751
287B.16: RNCC: 3 | RNVC: 2

17 Dec 2003

5120-14-541-1832
Nutdriver

145411832
77-17H: RNCC: 3 | RNVC: 2

18 May 2004

5120-14-255-5127
Aligning Punch

142555127
3210-97-31-390: RNCC: 3 | RNVC: 2

1 Jan 1969

5120-14-437-2093
Box Wrench

144372093
A-JB0326-001: RNCC: 3 | RNVC: 9
32738: RNCC: 5 | RNVC: 9
J-17904-00: RNCC: 5 | RNVC: 9
J17904: RNCC: 5 | RNVC: 9
J17904-00: RNCC: 5 | RNVC: 9

23 Jan 1990

5120-14-309-3947
Jaw Cable Grip

143093947
536-415-009DET34: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-291-8198
Pipe Wrench

142918198
134.10: RNCC: 3 | RNVC: 2
134-10: RNCC: 5 | RNVC: 2
3148511365106: RNCC: 5 | RNVC: 2
0136510: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-235-9708
Socket Wrench

142359708
NO PRIMARY REF14-235-9708: RNCC: 3 | RNVC: 2
154-12: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-361-4918
Mechanical Puller

143614918
8812711000: RNCC: 3 | RNVC: 2
85-691-1411: RNCC: 6 | RNVC: 9

24 Jan 1980

5120-14-506-0614
Socket Wrench

145060614
74T11: RNCC: 3 | RNVC: 2

2 Apr 1998

5120-14-311-9705
Socket Wrench Set

143119705
S417M: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-466-2800
Socket Wrench

144662800
10111009: RNCC: 3 | RNVC: 2

3 Nov 1993

5120-14-530-2029
Socket Wrench Set

145302029
S.460EP: RNCC: 3 | RNVC: 2

22 May 2002

5120-14-481-1761
Socket Wrench

144811761
GS141-12: RNCC: 3 | RNVC: 2

25 Apr 1996

5120-14-480-1525
Socket Wrench

144801525
888-387-400-1: RNCC: 3 | RNVC: 2

21 Feb 1996

5120-14-264-7903
Pipe Wrench

142647903
67-25: RNCC: 3 | RNVC: 2
69-25: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-441-2167
Aligning Punch

144412167
332A94-2701-12: RNCC: 3 | RNVC: 2

22 Aug 1990

5120-14-542-2076
Seal Inserter

145422076
10039889: RNCC: 3 | RNVC: 2
10039889: RNCC: 5 | RNVC: 9

8 Jul 2004

5120-14-527-8155
Box Wrench

145278155
888-496-900-1: RNCC: 3 | RNVC: 2

21 Nov 2001

5120-14-355-5997
Hand Hammer Head

143555997
209: RNCC: 3 | RNVC: 2
3875-20: RNCC: 3 | RNVC: 9

19 Mar 1979

5120-14-471-5708
Aligning Punch

144715708
T700A2799000011: RNCC: 3 | RNVC: 2

31 Aug 1994

5120-14-385-3495
Mechanical Puller

143853495
6811J32-1671-00: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-249-9412
Box Wrench

142499412
62-18X19: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-350-0262
Mechanical Puller

143500262
3130S95-67-031: RNCC: 3 | RNVC: 2

14 Jun 1978

5120-14-446-1008
Mechanical Puller

144461008
853-203-097-0: RNCC: 3 | RNVC: 2

6 Mar 1991

5120-14-363-9932
Hand Screw Jack

143639932
341A91-0102-00: RNCC: 3 | RNVC: 2

7 Aug 1980

5120-14-393-8863
Mechanical Puller

143938863
NO PRIMARY REF14-393-8863: RNCC: 3 | RNVC: 2
OU139437: RNCC: 5 | RNVC: 9

23 Jun 1984

5120-14-398-1993
Socket Wrench

143981993
853-100-170-0: RNCC: 3 | RNVC: 2

31 Jan 1985

5120-14-273-6954
Hand Hammer Head

142736954
E71-014-1600: RNCC: 2 | RNVC: 2
2-1500: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-224-0498
Mechanical Puller

142240498
3130S95-12-004: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-399-3364
Seal Inserter

143993364
MGF372-22: RNCC: 3 | RNVC: 2

6 Mar 1985

5120-14-545-0152
Drill Guide

145450152
505-10-01: RNCC: 3 | RNVC: 2

15 Mar 2005

5120-14-362-0749
Hand Hydraulic Jack

143620749
HSM1: RNCC: 3 | RNVC: 9
RASHSM1: RNCC: 5 | RNVC: 9
85-689-4689: RNCC: 6 | RNVC: 9

20 Feb 1980

5120-14-440-3503
Box Wrench

144403503
F47135: RNCC: 3 | RNVC: 2

11 Jul 1990

5120-14-235-6000
Box Wrench

142356000
B032JB1REP24: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-299-2989
Mechanical Puller

142992989
28665: RNCC: 3 | RNVC: 2
28665: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-442-3604
Box Wrench

144423604
0116525: RNCC: 3 | RNVC: 2
70.13: RNCC: 5 | RNVC: 2

15 Oct 1990

5120-14-232-7984
Box Wrench

142327984
15137T1: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-551-2968
Ratchet Wrench

145512968
V.690D: RNCC: 3 | RNVC: 2

8 Sep 2006

5120-14-474-8716
Seal Inserter

144748716
1103066C00: RNCC: 3 | RNVC: 2

8 Mar 1995

5120-14-298-7848
Trowel

142987848
E75505-200: RNCC: 2 | RNVC: 2
E75-110B200: RNCC: 5 | RNVC: 2
2695 974 020: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-533-0220
Mechanical Puller

145330220
899215: RNCC: 3 | RNVC: 2

17 Jan 2003

5120-14-202-1924
Saddler's Awl Haft

142021924
101: RNCC: 3 | RNVC: 2

1 Jan 1963

5120-14-456-8212
Gear Inserter

144568212
45057811: RNCC: 3 | RNVC: 2
45057811: RNCC: 5 | RNVC: 9

24 Jul 1992

5120-14-517-3900
Seal Inserter

145173900
0XB501-214-861-01: RNCC: 3 | RNVC: 2

8 Dec 1999

5120-14-516-4294
Seal Inserter

145164294
TA5042P002: RNCC: 3 | RNVC: 2

22 Sep 1999

5120-14-280-8763
Socket Wrench Set

142808763
72P18U: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-471-7055
Open End Box Wrench

144717055
70A.3/8: RNCC: 3 | RNVC: 2
3148511166932: RNCC: 5 | RNVC: 2
0116693: RNCC: 5 | RNVC: 9

13 Sep 1994

5120-14-481-1754
Socket Wrench

144811754
GS141-6: RNCC: 3 | RNVC: 2

25 Apr 1996

5120-14-524-2229
Mechanical Puller

145242229
47262920: RNCC: 3 | RNVC: 2

7 Mar 2001

5120-14-484-7251
Lamp Extractor

144847251
126920: RNCC: 3 | RNVC: 2
ORTL2: RNCC: 3 | RNVC: 2

5 Dec 1996

5120-14-372-7622
Mechanical Puller

143727622
3160S95-62-070: RNCC: 3 | RNVC: 2
3160-95-62-070: RNCC: 5 | RNVC: 2

21 Sep 1981

5120-14-333-3086
Drive Pin Punch

143333086
GY15619-1-43-46: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-228-3182
Hand Hammer

142283182
E71-013-20EM: RNCC: 2 | RNVC: 2
1-20: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-465-4625
Seal Inserter

144654625
851-500-046-0: RNCC: 3 | RNVC: 2

30 Sep 1993

5120-14-534-5241
Aligning Punch

145345241
M19050-003: RNCC: 3 | RNVC: 2

26 Mar 2003

5120-14-555-9095
Plier Clamp

145559095
123 079: RNCC: 3 | RNVC: 2

7 Jan 2008

5120-14-340-0931
Socket Wrench Set

143400931
0516740: RNCC: 3 | RNVC: 2
S443E: RNCC: 5 | RNVC: 2
S.443E: RNCC: 5 | RNVC: 2

18 Jan 1977

5120-14-321-3492
Mechanical Puller

143213492
8810376000: RNCC: 3 | RNVC: 2
8006110890: RNCC: 5 | RNVC: 2
0T2-2-20: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-273-7015
Hand Hammer Head

142737015
208-36: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-432-7082
Seal Inserter

144327082
OUT11821-5: RNCC: 3 | RNVC: 2
0UT11821-5: RNCC: 5 | RNVC: 2

21 Jun 1989

5120-14-235-6203
Box Wrench

142356203
100-36X41: RNCC: 3 | RNVC: 2
3272670305953: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-250-6454
Open End Box Wrench

142506454
552-000MA316DET18: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-415-6524
Driftpin

144156524
MJK2430104: RNCC: 3 | RNVC: 2
MJK2430104: RNCC: 5 | RNVC: 2

18 May 1987

5120-14-452-3468
Machinist's Vise

144523468
399-4: RNCC: 3 | RNVC: 2
3272670208353: RNCC: 5 | RNVC: 2
91726730: RNCC: 5 | RNVC: 2

8 Jan 1992

5120-14-202-1923
Saddler's Awl Haft

142021923
100-6: RNCC: 3 | RNVC: 2

1 Jan 1963

5120-14-550-8484
Socket Wrench Set

145508484
R.450AP: RNCC: 3 | RNVC: 2

20 Jul 2006

5120-14-486-3998
Crimping Tool Die

144863998
0-0314948-1: RNCC: 3 | RNVC: 2

17 Mar 1997

5120-14-363-9943
Driftpin

143639943
703A93-0201-20: RNCC: 3 | RNVC: 2

7 Aug 1980

5120-14-443-9357
Box Wrench

144439357
GS102-07: RNCC: 3 | RNVC: 2

13 Dec 1990

5120-14-435-0744
Seal Inserter

144350744
853-290-117-0: RNCC: 3 | RNVC: 2

18 Oct 1989

5120-14-222-7484
Box Wrench

142227484
30-5-16X3-8: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-367-1422
Open End Box Wrench

143671422
M24-013: RNCC: 3 | RNVC: 2
M24-013: RNCC: 5 | RNVC: 9

11 Dec 1980

5120-14-514-3827
Open End Box Wrench

145143827
ENFD29468-14X16: RNCC: 3 | RNVC: 2

19 May 1999

5120-14-401-4110
Mechanical Puller

144014110
332A93-3209-00: RNCC: 3 | RNVC: 2

5 Jun 1985

5120-14-402-8900
Mechanical Puller

144028900
333-099-401-0: RNCC: 3 | RNVC: 2

19 Jul 1985

5120-14-453-7027
Mechanical Puller

144537027
24C5216-10A-PT93338: RNCC: 3 | RNVC: 2

5 Mar 1992

5120-14-373-8862
Mechanical Puller

143738862
16298497: RNCC: 1 | RNVC: 2
62-9-03R440-100000: RNCC: 3 | RNVC: 2
0403246M00: RNCC: 5 | RNVC: 2
16298497: RNCC: 5 | RNVC: 9

8 Dec 1981

5120-14-302-5042
Socket Wrench

143025042
NO PRIMARY REF14-302-5042: RNCC: 3 | RNVC: 2
42-27-04-015: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-352-5139
Open End Box Wrench

143525139
8811805000: RNCC: 3 | RNVC: 2

16 Oct 1978

5120-14-200-7117
Drive Pin Punch

142007117
7C35: RNCC: 3 | RNVC: 2
711-4: RNCC: 3 | RNVC: 2
4445-3-5: RNCC: 3 | RNVC: 2
250-100X3-5: RNCC: 5 | RNVC: 2
250-3-5: RNCC: 5 | RNVC: 2
710-4: RNCC: 5 | RNVC: 2

1 Jan 1962

5120-14-262-9687
Mechanical Puller

142629687
35-154796: RNCC: 3 | RNVC: 9

1 Jan 1970

5120-14-316-5561
Mechanical Puller

143165561
321A97-0053-00: RNCC: 3 | RNVC: 2
321-97-0053-00: RNCC: 5 | RNVC: 2
08-557: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-376-2311
Driftpin

143762311
NO PRIMARY REF14-376-2311: RNCC: 3 | RNVC: 2
0U133605: RNCC: 5 | RNVC: 9
337165: RNCC: 5 | RNVC: 9

30 Mar 1982

5120-14-433-5474
Mechanical Puller

144335474
0736635F00: RNCC: 3 | RNVC: 2
0856807C00: RNCC: 3 | RNVC: 2

2 Aug 1989

5120-14-202-9283
Hand Hammer

142029283
NO PRIMARY REF14-202-9283: RNCC: 3 | RNVC: 2
0RT5-325M: RNCC: 5 | RNVC: 9
ORT5-325M: RNCC: 5 | RNVC: 9
MY-1A: RNCC: 6 | RNVC: 9

1 Jan 1963

5120-14-218-9643
Socket Wrench

142189643
80 7-8: RNCC: 3 | RNVC: 2
72-7-8: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-494-0761
Mechanical Puller

144940761
10152581: RNCC: 3 | RNVC: 2
F300 0T 015 3442: RNCC: 6 | RNVC: 9

15 Oct 1997

5120-14-400-6408
Hand Hammer

144006408
200-18ENX: RNCC: 3 | RNVC: 2

8 May 1985

5120-14-381-4161
Hand Scissors Jack

143814161
6725-35: RNCC: 3 | RNVC: 2
7910001814: RNCC: 5 | RNVC: 2

25 Jan 1983

5120-14-378-7595
Mechanical Puller

143787595
U32-80: RNCC: 3 | RNVC: 2

11 Aug 1982

5120-14-364-9201
Driftpin

143649201
321A96-0002-00: RNCC: 3 | RNVC: 2
85-691-1868: RNCC: 6 | RNVC: 9

2 Sep 1980

5120-14-438-3509
Hand Rivet Set

144383509
330A98-7539-20: RNCC: 3 | RNVC: 2

14 Mar 1990

5120-14-442-1510
Hand Rivet Set

144421510
853-600-242-6: RNCC: 3 | RNVC: 2

3 Oct 1990

5120-14-440-5411
Mechanical Puller

144405411
0-30878-1: RNCC: 3 | RNVC: 2
85-694-1086: RNCC: 6 | RNVC: 9

17 Jul 1990

5120-14-429-7217
Seal Inserter

144297217
853-290-087-0: RNCC: 3 | RNVC: 2

8 Feb 1989

5120-14-362-4332
Socket Wrench

143624332
SBM198: RNCC: 3 | RNVC: 2

19 Mar 1980

5120-14-329-6386
Box Wrench

143296386
MHC230-22: RNCC: 3 | RNVC: 2
MHC230-22: RNCC: 5 | RNVC: 2
MHC230-22-00: RNCC: 5 | RNVC: 2

2 Jul 1975

5120-14-041-1658
Fuse Puller

140411658
7088.3110: RNCC: 3 | RNVC: 2
90178: RNCC: 3 | RNVC: 2
0883110: RNCC: 5 | RNVC: 2
3660571016106: RNCC: 5 | RNVC: 2

1 Jan 1974

5120-14-520-1225
Mechanical Puller

145201225
899754: RNCC: 3 | RNVC: 2
7M864: RNCC: 3 | RNVC: 2

12 May 2000

5120-14-247-2060
Socket Wrench

142472060
C58888: RNCC: 3 | RNVC: 2
100907: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-274-8500
Socket Wrench

142748500
162-3-2: RNCC: 3 | RNVC: 9
DEM162-3-2: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-324-6603
Armature Stop

143246603
9970-143-482: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-307-8821
Seal Inserter

143078821
330A93-3105-00: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-375-7952
Screw Extractor

143757952
330A93-2038-00: RNCC: 3 | RNVC: 2
330A-93-2038-00: RNCC: 5 | RNVC: 2

26 Feb 1982

5120-14-291-8183
Box Wrench

142918183
55.24X26: RNCC: 3 | RNVC: 2
105N24X26: RNCC: 3 | RNVC: 2
111-24X26: RNCC: 3 | RNVC: 9
3148511112007: RNCC: 5 | RNVC: 2
55-24X26: RNCC: 5 | RNVC: 2
0713 305 246: RNCC: 5 | RNVC: 2
0111200: RNCC: 5 | RNVC: 9
DEM111-24X26: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-521-2255
Seal Inserter

145212255
010-444-00826-107: RNCC: 3 | RNVC: 2
010-444-00826-107: RNCC: 3 | RNVC: 2
010-444-00826-107: RNCC: 5 | RNVC: 2
010-444-00826-107: RNCC: 5 | RNVC: 2

12 Jul 2000

5120-14-370-8897
Hand Hydraulic Jack

143708897
703A91-0317-00: RNCC: 3 | RNVC: 2

5 Jun 1981

5120-14-314-8710
Ratchet Screwdriver

143148710
AMM.M: RNCC: 3 | RNVC: 2
101787: RNCC: 5 | RNVC: 2
3148510076409: RNCC: 5 | RNVC: 2
AMMM: RNCC: 5 | RNVC: 2
0007640: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-433-5473
Mechanical Puller

144335473
0766132S00: RNCC: 3 | RNVC: 2
0856805A00: RNCC: 3 | RNVC: 2

2 Aug 1989

5120-14-322-8973
Pipe Wrench

143228973
BBW218: RNCC: 3 | RNVC: 9

1 Jan 1975

5120-14-310-8500
Socket Wrench

143108500
NO PRIMARY REF14-310-8500: RNCC: 3 | RNVC: 2
514158: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-311-6042
Mechanical Puller

143116042
13169: RNCC: 3 | RNVC: 2
21388: RNCC: 5 | RNVC: 1
013169: RNCC: 5 | RNVC: 2
0120-002-680: RNCC: 5 | RNVC: 2
85-101-1872: RNCC: 6 | RNVC: 9

1 Jan 1974

5120-14-273-6997
Hand Hammer Head

142736997
E71-015-250: RNCC: 2 | RNVC: 2
200-26: RNCC: 3 | RNVC: 2
SYB0303: RNCC: 5 | RNVC: 2
0292600: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-506-7428
Box Wrench

145067428
58-8X9: RNCC: 3 | RNVC: 2
58.8X9: RNCC: 3 | RNVC: 2
3148511137109: RNCC: 5 | RNVC: 2
0113710: RNCC: 5 | RNVC: 9

13 May 1998

5120-14-304-4073
Box Wrench

143044073
TMY20-52-401: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-413-6055
Socket Wrench

144136055
069A44-717616F: RNCC: 1 | RNVC: 2
DA4-817: RNCC: 3 | RNVC: 2

22 Dec 1986

5120-14-432-7131
Seal Inserter

144327131
NO PRIMARY REF14-432-7131: RNCC: 3 | RNVC: 2
0U143466: RNCC: 5 | RNVC: 9
OU143466: RNCC: 5 | RNVC: 9

21 Jun 1989

5120-14-440-8534
Mechanical Puller

144408534
U.330: RNCC: 3 | RNVC: 2
3148510754000: RNCC: 5 | RNVC: 2

30 Jul 1990

5120-14-273-3174
Box Wrench

142733174
E29-071-19DR0ITEC0URANTE: RNCC: 2 | RNVC: 2

1 Jan 1971

5120-14-481-8962
Socket Wrench

144818962
HSS831AH198: RNCC: 3 | RNVC: 2
89167265: RNCC: 5 | RNVC: 2

6 Jun 1996

5120-14-348-4998
Mechanical Puller

143484998
8812053000: RNCC: 3 | RNVC: 2

29 Mar 1978

5120-14-542-6091
Pipe Wrench

145426091
8046023X00: RNCC: 3 | RNVC: 2

21 Jul 2004

5120-14-456-9457
Aligning Punch

144569457
3704MRC4-30: RNCC: 3 | RNVC: 2

30 Jul 1992

5120-14-216-4599
Hand Hydraulic Jack

142164599
C20A: RNCC: 3 | RNVC: 9
200S: RNCC: 5 | RNVC: 9
SPW: RNCC: 5 | RNVC: 9
RASC20A: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-411-9136
Driftpin

144119136
14189860L: RNCC: 3 | RNVC: 2

16 Sep 1986

5120-14-319-6471
Mechanical Puller

143196471
NO PRIMARY REF14-319-6471: RNCC: 3 | RNVC: 2
45869: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-366-4829
Hand Hammer

143664829
463-2F67: RNCC: 3 | RNVC: 2

20 Nov 1980

5120-14-465-4632
Mechanical Puller

144654632
851-500-056-0: RNCC: 3 | RNVC: 2

30 Sep 1993

5120-14-364-6362
Hand Rivet Set

143646362
067340: RNCC: 3 | RNVC: 2
XG5-32TGS: RNCC: 5 | RNVC: 2

2 Sep 1980

5120-14-457-7324
Socket Wrench

144577324
0372-42-10155: RNCC: 3 | RNVC: 2

17 Sep 1992

5120-14-386-9447
Mechanical Puller

143869447
NO PRIMARY REF14-386-9447: RNCC: 3 | RNVC: 2
607678: RNCC: 5 | RNVC: 9

24 Aug 1983

5120-14-437-0684
Socket Wrench

144370684
11163: RNCC: 3 | RNVC: 2

17 Jan 1990

5120-14-530-3610
Hand Hammer

145303610
215.22: RNCC: 3 | RNVC: 2
3148511489208: RNCC: 5 | RNVC: 2

5 Jun 2002

5120-14-467-8917
Drive Pin Punch

144678917
251A.1: RNCC: 3 | RNVC: 2
91849600: RNCC: 5 | RNVC: 2
251A.1: RNCC: 5 | RNVC: 2
3059002290: RNCC: 5 | RNVC: 2
3148511601457: RNCC: 5 | RNVC: 2
0110891K00: RNCC: 5 | RNVC: 2
0160145: RNCC: 5 | RNVC: 9

2 Feb 1994

5120-14-232-3060
Box Wrench

142323060
3271-55-1: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-250-0094
Socket Wrench

142500094
P02418: RNCC: 3 | RNVC: 2
0000330557: RNCC: 5 | RNVC: 2
330557: RNCC: 5 | RNVC: 9
0000330557: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-399-1508
Open End Box Wrench

143991508
104X10X12: RNCC: 3 | RNVC: 2

6 Mar 1985

5120-14-533-9271
Bushing Driver Set

145339271
453 7408-236: RNCC: 3 | RNVC: 2
101022018045A: RNCC: 3 | RNVC: 9

5 Mar 2003

5120-14-260-3595
Mechanical Puller

142603595
3160-95-62-210: RNCC: 3 | RNVC: 2
3160S95-62-210: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-257-2901
Mechanical Puller

142572901
FH152-903: RNCC: 3 | RNVC: 2

1 Jan 1969

5120-14-392-0820
Open End Box Wrench

143920820
853-100-030-0: RNCC: 3 | RNVC: 2

21 Mar 1984

5120-14-530-6420
Seal Inserter Set

145306420
010-444-00826-000: RNCC: 3 | RNVC: 2

1 Jul 2002

5120-14-418-1889
Mechanical Puller

144181889
332A93-3604-00: RNCC: 3 | RNVC: 2

6 Aug 1987

5120-14-214-4815
Hand Shovel

142144815
1204-28-8-10-2: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-273-7003
Hand Hammer Head

142737003
E71-015-2500: RNCC: 2 | RNVC: 2
200-60: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-292-7515
Lamp Extractor

142927515
3018: RNCC: 3 | RNVC: 2
3017: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-484-1227
Mechanical Puller

144841227
0161280000: RNCC: 3 | RNVC: 2

24 Oct 1996

5120-14-356-4641
Mechanical Puller

143564641
330A93-4100-01: RNCC: 3 | RNVC: 2

25 Apr 1979

5120-14-450-4220
Lamp Cap Extractor

144504220
98-968: RNCC: 3 | RNVC: 2
RAQ0464: RNCC: 5 | RNVC: 2

8 Oct 1991

5120-14-488-5336
Spatula

144885336
149.220.600: RNCC: 3 | RNVC: 2
149-220-600: RNCC: 5 | RNVC: 2

15 May 1997

5120-14-261-2437
Mechanical Puller

142612437
NO PRIMARY REF14-261-2437: RNCC: 3 | RNVC: 2
BL19926: RNCC: 5 | RNVC: 9

1 Jan 1970

5120-14-438-4518
Drill Guide

144384518
330A98-3396-00: RNCC: 3 | RNVC: 2

21 Mar 1990

5120-14-466-8236
Mechanical Puller

144668236
589946: RNCC: 3 | RNVC: 2
85-694-1090: RNCC: 6 | RNVC: 9

3 Dec 1993

5120-14-537-5595
Seal Inserter

145375595
350A93-3326-00: RNCC: 3 | RNVC: 2

3 Nov 2003

5120-14-544-7393
Seal Inserter

145447393
5000262533: RNCC: 3 | RNVC: 2

22 Feb 2005

5120-14-463-3250
Seal Inserter

144633250
0000079000: RNCC: 3 | RNVC: 2

9 Jun 1993

5120-14-345-9433
Fuse Puller

143459433
W097562: RNCC: 3 | RNVC: 2
W97562: RNCC: 5 | RNVC: 2

5 Nov 1977

5120-14-311-1679
Socket Wrench

143111679
76.23: RNCC: 3 | RNVC: 2
250-5377: RNCC: 5 | RNVC: 2
2695 612 623: RNCC: 5 | RNVC: 2
3148511209509: RNCC: 5 | RNVC: 2
76-23: RNCC: 5 | RNVC: 2
0120950: RNCC: 5 | RNVC: 9
FACOM76.23: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-364-6192
Rack Bar Jack

143646192
4C27900A: RNCC: 3 | RNVC: 2
5435917E: RNCC: 5 | RNVC: 2
75492002: RNCC: 5 | RNVC: 2
75492002P: RNCC: 5 | RNVC: 2
HY623-903A: RNCC: 5 | RNVC: 2
HY623903A: RNCC: 5 | RNVC: 2

2 Sep 1980

5120-14-283-6539
Hand Hydraulic Jack

142836539
4867-100T121KG: RNCC: 3 | RNVC: 9
4867-100: RNCC: 3 | RNVC: 9

1 Jan 1972

5120-14-423-3172
Rack Bar Jack

144233172
C508-00: RNCC: 3 | RNVC: 2
5C508-00: RNCC: 5 | RNVC: 2

14 Apr 1988

5120-14-451-0458
Mechanical Puller

144510458
52240902300: RNCC: 3 | RNVC: 2
871929-00: RNCC: 5 | RNVC: 2
M715060: RNCC: 5 | RNVC: 2

28 Oct 1991

5120-14-468-4909
Hand Hydraulic Jack

144684909
2089-10150: RNCC: 3 | RNVC: 2

3 Mar 1994

5120-14-463-9706
Aligning Punch

144639706
854-400-003-0: RNCC: 3 | RNVC: 2

7 Jul 1993

5120-14-324-1640
Lamp Extractor

143241640
NO PRIMARY REF14-324-1640: RNCC: 3 | RNVC: 2
27538: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-306-3511
Plastic Mallet

143063511
320-32: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-480-2606
Seal Inserter

144802606
888-378-400-1: RNCC: 3 | RNVC: 2

28 Feb 1996

5120-14-041-9775
Socket Wrench

140419775
NO PRIMARY REF14-041-9775: RNCC: 3 | RNVC: 2
229485: RNCC: 5 | RNVC: 9

24 Jul 1976

5120-14-544-3052
Inspection Mirror

145443052
093100V: RNCC: 3 | RNVC: 2

18 Jan 2005

5120-14-451-4428
Mechanical Puller

144514428
80Y0045000: RNCC: 3 | RNVC: 2

21 Nov 1991

5120-14-465-9518
Stud Inserter

144659518
25545911900: RNCC: 3 | RNVC: 2

21 Oct 1993

5120-14-324-7072
Plastic Mallet

143247072
212A.35: RNCC: 3 | RNVC: 2
212A35: RNCC: 5 | RNVC: 2
2695 490 700: RNCC: 5 | RNVC: 2
3059002320: RNCC: 5 | RNVC: 2
3148511484609: RNCC: 5 | RNVC: 2
162-9113: RNCC: 5 | RNVC: 2
2695 490 400: RNCC: 5 | RNVC: 2
212-35: RNCC: 5 | RNVC: 9
0148460: RNCC: 5 | RNVC: 9
FACOM212A.35: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-438-5049
Aligning Punch

144385049
J47923: RNCC: 3 | RNVC: 2
85-694-0746: RNCC: 6 | RNVC: 9

21 Mar 1990

5120-14-529-4250
Mechanical Puller

145294250
6401LOC002: RNCC: 3 | RNVC: 2

29 Mar 2002

5120-14-466-2290
Hand Beading Tool

144662290
853-600-447-0: RNCC: 3 | RNVC: 2

3 Nov 1993

5120-14-242-2814
Socket Wrench

142422814
35-20: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-218-9651
Socket Wrench

142189651
122-54: RNCC: 3 | RNVC: 9
72-54: RNCC: 5 | RNVC: 2
91580211: RNCC: 5 | RNVC: 2
DEM122-54: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-438-3497
Piston Inserter

144383497
330A98-7510-20: RNCC: 3 | RNVC: 2

14 Mar 1990

5120-14-427-2187
Mechanical Puller

144272187
46MS047-34: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-395-2929
Socket Wrench Set

143952929
M.431U: RNCC: 3 | RNVC: 2
3148515092107: RNCC: 5 | RNVC: 2
0509210: RNCC: 5 | RNVC: 9

2 Oct 1984

5120-14-520-4763
Ratchet Wrench

145204763
10478882: RNCC: 3 | RNVC: 2

17 May 2000

5120-14-531-6738
Socket Wrench Set

145316738
J.431A: RNCC: 3 | RNVC: 2
J431A: RNCC: 5 | RNVC: 2

11 Sep 2002

5120-14-458-4078
Mechanical Puller

144584078
0XBR501C080-02: RNCC: 3 | RNVC: 2

23 Oct 1992

5120-14-366-6092
Socket Wrench

143666092
M26-003: RNCC: 3 | RNVC: 2

20 Nov 1980

5120-14-417-3092
Claw Bar

144173092
NO PRIMARY REF14-417-3092: RNCC: 3 | RNVC: 2
G240A60: RNCC: 5 | RNVC: 9

1 Jul 1987

5120-14-411-7028
Socket Wrench

144117028
043-03-01C2: RNCC: 3 | RNVC: 2

27 Aug 1986

5120-14-532-3866
Seal Inserter

145323866
MGF589-31: RNCC: 3 | RNVC: 2

30 Oct 2002

5120-14-483-0704
Hand Hammer

144830704
205A.20: RNCC: 3 | RNVC: 2
147080: RNCC: 5 | RNVC: 2
205A-20: RNCC: 5 | RNVC: 2
3148511470800: RNCC: 5 | RNVC: 2
3059001113: RNCC: 5 | RNVC: 2
0147080: RNCC: 5 | RNVC: 9

8 Aug 1996

5120-14-406-5870
Driftpin

144065870
853-200-597-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-360-6459
Mechanical Puller

143606459
8810546000: RNCC: 3 | RNVC: 2

19 Dec 1979

5120-14-549-2646
Spatula

145492646
3001S014: RNCC: 3 | RNVC: 2

16 Mar 2006

5120-14-303-6312
Box Wrench

143036312
0D2-25: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-344-8203
Mechanical Puller

143448203
RS45-154: RNCC: 3 | RNVC: 9

9 Sep 1977

5120-14-250-6451
Open End Box Wrench

142506451
552-000MA316DET15: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-368-0575
Socket Wrench Set

143680575
NO PRIMARY REF14-368-0575: RNCC: 3 | RNVC: 2
0512470: RNCC: 5 | RNVC: 2
R.420D: RNCC: 5 | RNVC: 2
R420D: RNCC: 5 | RNVC: 2
91533182: RNCC: 5 | RNVC: 2

19 Jan 1981

5120-14-352-4401
Mechanical Puller

143524401
9970-111-141: RNCC: 3 | RNVC: 2
9970-111-141-0: RNCC: 5 | RNVC: 2

16 Oct 1978

5120-14-267-8262
Socket Wrench

142678262
MAT196-0066F5: RNCC: 3 | RNVC: 2
GSM196-011F8: RNCC: 5 | RNVC: 2
GSM196-11F8: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-286-0118
Hand Hydraulic Jack

142860118
U.66A: RNCC: 3 | RNVC: 2
3148510710006: RNCC: 5 | RNVC: 2
U66A: RNCC: 5 | RNVC: 2
0071000: RNCC: 5 | RNVC: 9
U66: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-432-7068
Seal Inserter

144327068
OUT11815-3: RNCC: 3 | RNVC: 2
0UT11815-3: RNCC: 5 | RNVC: 2

21 Jun 1989

5120-14-378-2908
Hand Hammer

143782908
154645: RNCC: 3 | RNVC: 2
SYB0339: RNCC: 5 | RNVC: 2
79432: RNCC: 5 | RNVC: 9

20 Jul 1982

5120-14-456-8476
Crimping Tool Die

144568476
68008: RNCC: 3 | RNVC: 2
85-694-6216: RNCC: 6 | RNVC: 9

24 Jul 1992

5120-14-275-8939
Trowel

142758939
E75111A200: RNCC: 2 | RNVC: 2
2695 940 020: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-363-4648
Box Wrench

143634648
4122-25X27: RNCC: 3 | RNVC: 9

9 May 1980

5120-14-306-4342
Mechanical Puller

143064342
8810406001: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-432-7226
Seal Inserter

144327226
OUT50160-1: RNCC: 3 | RNVC: 2
0UT50160-1: RNCC: 5 | RNVC: 2

21 Jun 1989

5120-14-490-0263
Drill Guide

144900263
83-9-11-11-604-03: RNCC: 3 | RNVC: 2

9 Sep 1997

5120-14-524-0670
Socket Wrench

145240670
8024682R00: RNCC: 3 | RNVC: 2

22 Feb 2001

5120-14-536-4327
Seal Inserter

145364327
132554: RNCC: 3 | RNVC: 2

5 Aug 2003

5120-14-487-6019
Mechanical Puller

144876019
365A93-3245-01: RNCC: 3 | RNVC: 2

11 Apr 1997

5120-14-352-5146
Seal Inserter

143525146
8812431000: RNCC: 3 | RNVC: 2

16 Oct 1978

5120-14-353-9390
Stud Inserter

143539390
02640903700: RNCC: 3 | RNVC: 2
026409037: RNCC: 5 | RNVC: 2

16 Jan 1979

5120-14-517-3913
Mechanical Puller

145173913
0XB501-252-706R18: RNCC: 3 | RNVC: 2

8 Dec 1999

5120-14-530-9359
Lamp Extractor

145309359
84-998: RNCC: 3 | RNVC: 2

17 Jul 2002

Load More Results