What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.

A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Blacksmith's Punch?

A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Mechanical Finger?

A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.

A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Screwdriver And Wrench Assembly?

A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Stakeholder Bench Plate?

A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.

What is a Drill Drift?

A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.

A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Digging Bar?

A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

What is a Valve Spring Lifter?

A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.

What is a Fuse Puller?

A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.

Hand Tools, Nonedged, Nonpowered - France (FR)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by France (FR) - NCB is 14

Page 18 of 110

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by France

51	20	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - France (FR)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 16 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Pipe Vise? 19 Items: A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.
What is a Hand Vise? 25 Items: A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.
What is a Hand Hydraulic Jack? 133 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 153 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 903 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 17 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
Swage,Bottom,Blacksmith's 10 Items
What is a Hand Tube Flaring Tool? 23 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Blacksmith's Punch? 12 Items: A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.
What is a Drain Plug Wrench? 45 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 57 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 16 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 3829 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
Flatter,Blacksmith's 18 Items
Swage,Top,Blacksmith's 12 Items
What is a Pipe Wrench? 110 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 149 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 53 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
Screwdriver,Offset 54 Items
What is a Screwdriver Bit? 707 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Mechanical Finger? 25 Items: A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.
What is a Socket Wrench Socket? 1803 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 1412 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 1641 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 52 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 565 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
Jack,Push-Pull,Screw 30 Items
What is a Hand Tube Bender? 54 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 1106 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 55 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pinch Bar? 19 Items: A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.
What is a Pry Bar? 17 Items: A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.
What is a Wrecking Bar? 15 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 273 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 413 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 32 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 295 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
Face,Hammer,Inserted 25 Items
What is a Hole Sheet Metal Holder? 37 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Screwdriver And Wrench Assembly? 11 Items: A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.
What is a Hand Rivet Set? 121 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Stakeholder Bench Plate? 22 Items: A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.
What is a Drill Drift? 32 Items: A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.
What is a Tack Claw? 15 Items: A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.
Mattock 28 Items
What is a Socket Wrench Handle Bar? 108 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Stake,Sheet Metalworking 50 Items
Riveter,Blind,Hand 76 Items
What is a Hand Shovel? 43 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 98 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 30 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
What is a Digging Bar? 20 Items: A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.
Block,Dolly,Sheet Metalworking 56 Items
What is a Piston Ring Compressor? 34 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Valve Spring Lifter? 29 Items: A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.
What is a Fuse Puller? 20 Items: A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.
What is a Hand Lead Seal Press? 18 Items: A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.
What is a Hand Beading Tool? 91 Items: A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.
What is a Hand Hammer? 502 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
Head,Hand Hammer 81 Items
What is a Lamp Extractor? 76 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Tube Packing Ring Installing Tool? 29 Items: A Tube Packing Ring Installing Tool (INSTALLING TOOL,TUBE PACKING RING) is an item designed to insert packing rings on tubes within tube sheets on condensers and similar heat exchangers. In operation, the packing rings are assembled on the loading pin mandrel and are then transferred from the mandrel on to the tube by means of a tubular sleeve which slides on the mandrel.
What is a Carpenters' Pincers? 18 Items: A Carpenters' Pincers (PINCERS,CARPENTERS') is a plierlike hand tool having two opposing jaws which may have hammerlike backs. One handle has a nail or tack pulling claw, the other is shaped to form a screwdriver. The tool may contain a wire cutter. See also NIPPERS, END CUTTING and PINCERS, FARRIERS'.
What is a Trowel? 33 Items: A Trowel is a tool used for bricklaying, concrete work, plastering, linoleum laying, and masonry work. Excludes CORNER TOOL, CONCRETE.
What is a Hand Abrasive Wheel Dresser? 12 Items: A Hand Abrasive Wheel Dresser (DRESSER,ABRASIVE WHEEL,HAND) is a tool designed to remove glaze from, dress, shape, sharpen, and true solid abrasive wheels. Excludes NIB, DIAMOND, WHEEL DRESSING.
What is a Lamp Cap Extractor? 32 Items: A Lamp Cap Extractor (EXTRACTOR,LAMP CAP) is a tool specifically designed to facilitate the removal of lamp caps from switchboards, panels or indicator lamps.
What is a Rivet Bucking Bar? 51 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 86 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 277 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Woven Cable Grip? 23 Items: A Woven Cable Grip (GRIP,CABLE,WOVEN) is a braided wire device designed to clutch a bare or insulated conductor, cable or wire rope, for holding taut or drawing through conduit.
What is a Screw Thread Insert Extractor? 19 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is an Electron Tube Extractor? 18 Items: An Electron Tube Extractor (EXTRACTOR,ELECTRON TUBE) is a hand tool designed to facilitate the removal of electron tubes from electronic equipment and to avoid burning the fingers. It may be used for installing tubes.
What is a Cross Tip Screwdriver? 362 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 21 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 11 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 37 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Tool Handle Wedge? 10 Items: A Tool Handle Wedge (WEDGE,TOOL HANDLE) is excludes WEDGE, WOOD.
What is a Marlinespike? 16 Items: A Marlinespike is a metal hand tool made in the shape of a tapered pin. One end is pointed and the opposite end may be headed. The body may contain an eye for a lanyard sling, or be grooved lengthwise. Excludes CABLE PICK and FID.
What is an Aligning Punch? 272 Items: An Aligning Punch (PUNCH,ALIGNING) is a round, square, hexagonal or octagonal bodied hand tool, having a round tapered section 6-1/2 inches (165.1 mm) or more in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, DRIFT and DRIFTPIN.
What is a Drift Punch? 25 Items: A Drift Punch (PUNCH,DRIFT) is a round, square, hexagonal, or octagonal bodied hand tool, having a round tapered section 4 to 6 inches (101.6 mm to 152.4 mm) inclusive in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, ALIGNING; and DRIFTPIN.
What is a Putty Knife? 36 Items: A Putty Knife (KNIFE,PUTTY) is a hand tool with a nonedged blade fixed to a handle for laying on and smoothing putty and the like.
What is a Socket Wrench Adapter-Extension? 40 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 30 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 184 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Socket Wrench Ratchet Attachment? 47 Items: A Socket Wrench Ratchet Attachment (RATCHET ATTACHMENT,SOCKET WRENCH) is a connection for socket wrenches and handles. Consists of a ratcheting mechanism with an internal drive on one end and an external drive on the opposite end of the same size. The item is designed to permit continuous rotation of the socket in one direction without removing the socket or handle and without a complete rotation of the handle.
What is a Wrench Extension Handle? 81 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Socket Wrench Crowfoot Attachment? 155 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 33 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 43 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 48 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 2394 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 372 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 300 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 661 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 32 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand-Operated Grommet And Eyelet Press? 12 Items: A Hand-Operated Grommet And Eyelet Press (PRESS,GROMMET AND EYELET,HAND-OPERATED) is a device which punches or pierces holes and in addition fastens or sets eyelets and grommets in cloth, paper and similar material. May be used for fastening or setting rivets, lacing hooks and snaps in cloth, paper and similar material. It is hand operated by lever or screw action. See also PUNCH, EYELET, PLIER TYPE and PRESS, GROMMET AND EYELET, FOOT OPERATED.
What is a Claw Bar? 19 Items: A Claw Bar (BAR,CLAW) is before using, refer to Reference Drawing Group AG.
What is a Shock Type Wheel Stud Nut Wrench? 11 Items: A Shock Type Wheel Stud Nut Wrench (WRENCH,WHEEL STUD NUT,SHOCK TYPE) is a manually operated item designed to remove wheel stud nuts. In operation the inner nut is turned by a socket attached to a shaft on which is a loose swinging weighted handle. The weighted handle may be swung quickly to provide an impact force against the socket to loosen the seized or jammed nuts. The outer nut is held stationary by a separate hexagonal holding wrench.
What is a Drift Pin Set? 30 Items: A Drift Pin Set is a group of DRIFTPIN having different characteristics.
What is a Tire Iron? 25 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 115 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Blacksmith's Vise? 14 Items: A Blacksmith's Vise (VISE,BLACKSMITH'S) is a clamping device consisting of a mounting plate, one stationary and one manual screw actuated jaw and a supporting member extending downward from the stationary jaw to the floor. Designed to be mounted on a bench, table or the like. May include pipe holding jaws.
What is a Machinist's Vise? 64 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Clamp Base Bench Vise? 10 Items: A Clamp Base Bench Vise (VISE,BENCH,CLAMP BASE) is a clamping device consisting of a base, one stationary and one manual screw actuated jaw, and one or more guide bars or rods. Designed with an integral clamp for attaching to a bench, table, or the like. Does not include pipe holding jaws.
What is a Fixed Open End Wrench Set? 86 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Nail Set? 11 Items: A Nail Set is a round knurled, square, hexagonal or octagonal bodied hand tool having a round tapered section terminating in a cupped point. It is designed to set brad head nails below the surface by striking it a hammerlike blow. See also PUNCH, DRIVE PIN.
What is a Socket Wrench Set? 202 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is an Open End Box Wrench Set? 10 Items: An Open End Box Wrench Set (WRENCH SET,OPEN END BOX) is a group of WRENCH, OPEN END BOX having different characteristics.
What is a Combination Box And Open End Wrench Set? 72 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Box Wrench Set? 36 Items: A Box Wrench Set (WRENCH SET,BOX) is a group of box wrenches having different characteristics. It may include a HANDLE, EXTENSION WRENCH. See also WRENCH SET, COMBINATION, BOX AND OPEN END.
What is a Hot Line Stick? 26 Items: A Hot Line Stick is a hand tool consisting of a straight, round stick (pole) made of a suitable nonconductive material with a tool fixed to one end. The other end may be plain or have a butt mounting device fixed to it. Various types of attachments (hooks, rings, and bands) may be fixed to the body. It is designed for use in the repair and maintenance of live high voltage aerial lines. Excludes hot line sticks without heads.
Handle,Mattock-Pick 15 Items
What is a Wrench Kit? 73 Items: A Wrench Kit is an assortment of various types and sizes of wrenches such as SOCKET, SOCKET WRENCH; WRENCH, OPEN END, FIXED; WRENCH, BOX and the like. It may include adapter(s), ratchet(s) and the like. See also WRENCH SET (as modified.
What is a Brad Awl? 15 Items: A Brad Awl (AWL,BRAD) is a small, pointed tool used by shoemakers, saddlers, cabinetmakers, and the like for piercing small holes in wood, leather, and similar materials, and consists of a handle with a ferrule and a blade. The blade is round, terminating in a beveled, sharp straight edge and has a shank which passes through the center of the handle.
What is a Scratch Awl? 20 Items: A Scratch Awl (AWL,SCRATCH) is an item whose nominal length of blade is less than 4 inches (101.6 millimeters) and is provided with a nondetachable handle.
What is a Screw Extractor Set? 10 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 102 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
Jack,Scissors,Hand 26 Items
What is a Piston Ring Expander? 23 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
Mallet,Plastic 62 Items
Mallet,Rubber 10 Items
What is a Wood Mallet? 37 Items: A Wood Mallet (MALLET,WOOD) is excludes MALLET, CALKING; MALLET, HAWSING and MALLET, SERVING.
What is a Rack Bar Jack? 30 Items: A Rack Bar Jack (JACK,RACK BAR) is excludes JACK, BUMPER and JACK, REEL, HAND.
What is a Pneumatic Tire Valve Core Inserter And Remover? 14 Items: A Pneumatic Tire Valve Core Inserter And Remover (INSERTER AND REMOVER,PNEUMATIC TIRE VALVE CORE) is a bar of steel having a small cylindrical slotted end for removing or installing a valve core in a valve stem by a screwing motion. See also REPAIR TOOL, PNEUMATIC TIRE VALVE.
What is a Hand Tube Swaging Tool Kit? 20 Items: A Hand Tube Swaging Tool Kit (SWAGING TOOL KIT,TUBE,HAND) is a hand-operated noncutting tool consisting of one or more PUNCH, TUBE SWAGING, HAND and a tube flaring bar.
What is a Hand Tube Flaring Punch? 11 Items: A Hand Tube Flaring Punch (PUNCH,TUBE FLARING,HAND) is a noncutting tool having a shaped end or section designed to flare the ends of tubes. One type is designed to flare the ends of tubes against a tube sheet, and another to flare tube ends to mate with tube fittings. Includes punch components of FLARING TOOL, TUBE, HAND.
What is a Hose Strap Band Clamping Tool? 26 Items: A Hose Strap Band Clamping Tool (CLAMPING TOOL,STRAP BAND,HOSE) is an item designed to tension and lock metal straps around a rubber hose, and the like. It is also used to clamp and hold fittings therein.
What is a Mechanical Puller? 3073 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 470 Items
What is a Slip Joint Pliers? 84 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Brake Repair Pliers? 14 Items: A Brake Repair Pliers (PLIERS,BRAKE REPAIR) is a tool having jaws designed for use in brake repair operations, such as removing and replacing items such as keys, springs, and the like. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 226 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 12 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 81 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 56 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 15 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 11 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 29 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Cross Tip Screwdriver Set? 14 Items: A Cross Tip Screwdriver Set (SCREWDRIVER SET,CROSS TIP) is a group of SCREWDRIVER, CROSS TIP having different characteristics.
What is a Spanner Wrench Set? 18 Items: A Spanner Wrench Set (WRENCH SET,SPANNER) is a group of items under WRENCH, SPANNER having different characteristics.
What is a Drive Pin Punch Set? 31 Items: A Drive Pin Punch Set (PUNCH SET,DRIVE PIN) is a group of PUNCH, DRIVE PIN having different characteristics.
What is an Aligning Punch Set? 13 Items: An Aligning Punch Set (PUNCH SET,ALIGNING) is a group of PUNCH, ALIGNING having different characteristics. See also DRIFTPIN SET.
What is a Slugging Type Box Wrench Socket? 16 Items: A Slugging Type Box Wrench Socket (SOCKET,SLUGGING TYPE BOX WRENCH) is an item having a hexagonal external drive at one end, made to fit into the internal hexagonal or 12-point opening of a slugging type box wrench. The opposite end has a single-broached hexagonal opening of the same size as the external drive. The item is designed with extra thick walls to withstand the impact of sledge blows on the driving wrench.
What is a Mechanical Puller Step Plate? 44 Items: A Mechanical Puller Step Plate (STEP PLATE,MECHANICAL PULLER) is a circular disk, flanged to provide a shoulder, and designed to provide a base for the screw point of a PULLER, MECHANICAL when pulling externally mounted bearings, gears, and the like from hollow shafts or housings. It has a concentric, countersunk hole to accommodate the puller screw point.
What is a Solid Center Punch? 79 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Cable Type Ratchet Lever Puller? 20 Items: A Cable Type Ratchet Lever Puller (PULLER,RATCHET LEVER,CABLE TYPE) is an item consisting of a metal frame and ratchet lever reel to which is attached one end of a flexible cable (wire rope). The cable feeds through the fast eye in the metal frame, and may be reeved through a slip hook tackle hook. See also BINDER, LOAD; HOIST, WIRE ROPE and STRETCHER, WIRE.
What is an Electronic Equipment Tuning Wand? 18 Items: An Electronic Equipment Tuning Wand (TUNING WAND,ELECTRONIC EQUIPMENT) is a hand-held rod used in determining the adjustment of the windings of a radio frequency coil. It is made of insulating material with iron on one end and brass on the other end. By inserting the iron end in the coil, the inductance is increased and by inserting the brass end, the inductance is decreased.
What is a Combination Open End And Spanner Wrench? 14 Items: A Combination Open End And Spanner Wrench (WRENCH,OPEN END AND SPANNER,COMBINATION) is a tool having open end wrench characteristics at one end and spanner wrench features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s) at the other end.
What is a Detent Handling Tool? 187 Items: A Detent Handling Tool (HANDLING TOOL,DETENT) is a specially designed handling tool consisting of a rigid bar with a T-handle on one end. The other end is equipped with threads designed to mate the threads of a detent to facilitate inserting or extracting.
What is a Hand Material Handling Hook? 23 Items: A Hand Material Handling Hook (HOOK,MATERIAL HANDLING,HAND) is a hook whose curved end conforms to Style AP1, AP2, AP3 or AP4 of Reference Drawing Group AP. Excludes HOOK, MANHOLE COVER, HAND; HOOK, WIRE BREAKING, HAND; HOOK, ROCK CRUSHER FEEDING, HAND; HOOK, STRAINER REMOVING, HAND and HOOKS, BAG HANDLING, HAND.
What is a Magnetic Retrieving Tool? 11 Items: A Magnetic Retrieving Tool (RETRIEVING TOOL,MAGNETIC) is a hand-operated magnetic device used to locate and pick up metallic articles, such as bolts, nuts, pins, washers, and the like, in confined spaces. It may be rigid, flexible or adjustable. Excludes FINGER, MECHANICAL.
What is a Mechanical Puller Adapter? 78 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Combination Box And Open End Box Wrench? 13 Items: A Combination Box And Open End Box Wrench (WRENCH,BOX AND OPEN END BOX,COMBINATION) is a double end wrench, box and open end box, primarily designed for removing or replacing tube fittings. The opening in the open end box may be machined at an angle from the longitudinal center line of the wrench.
What is a Screw Thread Insert Inserter? 136 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Flat Tip Screwdriver Set? 48 Items: A Flat Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP) is a group of SCREWDRIVER, FLAT TIP having different characteristics.
What is a Terminal Crimping Tool Contact Positioner? 89 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 16 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is an Adjustable Wrench? 138 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 239 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 75 Items
Handle,Shovel 10 Items
What is a Socket Wrench Spanner Attachment? 88 Items: A Socket Wrench Spanner Attachment (SPANNER ATTACHMENT,SOCKET WRENCH) is an item having an adjustable or fixed span with pin, hook, or key type end that is used to fit and turn various size retaining rings, cover plates, plugs, couplings, and like parts. Usually designed to be driven by a male driver.
What is a Retaining Ring Installation Tool? 44 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Tacker? 16 Items: A Tacker is a hand-operated, hammerlike or gunlike item without a clincher, used to drive preformed connecting elements like pins, nails or staples through one object or piece of material into another. Excludes STAPLER (as modified).
What is a Bearing And Bushing Inserter? 290 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 207 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 939 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 14 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 93 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 161 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 94 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 141 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 53 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Six Point Tip Screwdriver? 155 Items: A Six Point Tip Screwdriver (SCREWDRIVER,SIX POINT TIP) is a manual screwdriver having a single nonremoveable blade having a tip with six rounded points.
What is a Seal Inserter And Remover? 147 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 478 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is a Preformed Packing Inserter And Remover? 34 Items: A Preformed Packing Inserter And Remover (INSERTER AND REMOVER,PREFORMED PACKING) is a hand tool designed to install and remove a PACKING, PREFORMED.
What is a Pin Remover? 34 Items: A Pin Remover (REMOVER,PIN) is a hand tool designed to facilitate the removal of a pin from a hole.
What is a Pin Inserter And Remover? 13 Items: A Pin Inserter And Remover (INSERTER AND REMOVER,PIN) is a rodlike tool designed to facilitate the insertion and removal of a pin from a hole.
What is an Electrical Contact Inserter And Remover? 37 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Piston Inserter? 40 Items: A Piston Inserter (INSERTER,PISTON) is a tool designed to permit installation of a piston or piston assembly without damaging the packings or piston.
What is a Spring Inserter And Remover? 85 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 13 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Stud Inserter? 22 Items: A Stud Inserter (INSERTER,STUD) is a device designed to drive in studs. It does not have any facilities for removing or extracting studs. See also INSERTER AND REMOVER, STUD.
What is a Stud Inserter And Remover? 17 Items: A Stud Inserter And Remover (INSERTER AND REMOVER,STUD) is a group of items designed to extract and to drive studs. It may include collets, guides, housings, holders and the like. See also REMOVER SET, STUD and INSERTER, STUD.
What is a Gear Inserter? 54 Items: A Gear Inserter (INSERTER,GEAR) is a hand tool designed to install various gears onto a gearshaft. It may be operated by a pushing or a striking force.
What is a Crimping Tool Die? 73 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is an Electrical Connector Inserter? 45 Items: An Electrical Connector Inserter (INSERTER,ELECTRICAL CONNECTOR) is a hand tool designed to hold an electrical connector, and to assist in the positioning and installation of the connector on a cover, panel or the like.
What is a Float? 12 Items: A Float is a tool used for concrete, plastering and grouting work.
What is a Mechanical Puller Set? 19 Items: A Mechanical Puller Set (PULLER SET,MECHANICAL) is two or more separate PULLER, MECHANICAL of different fixed sizes.
What is a Lifting Pneumatic Bag? 11 Items: A Lifting Pneumatic Bag (PNEUMATIC BAG,LIFTING) is a device made of flexible material designed to lift another item by being placed under the item and being inflated with air or some other gas. It will have a means of being connected to an air or gas source and may include a connector hose, a control valve and/or a pressure regulator.
What is a Cable Tie Installation Tool? 22 Items: A Cable Tie Installation Tool (INSTALLATION TOOL,CABLE TIE) is a lightweight, hand-held, hand-operated tool designed to fasten cable ties, straps and the like. Cable tie is inserted into the nose of the tool flush to the cable tie head. Trigger handle tightens cable tie and cuts off any excess. These installation tools are available in a variety of sizes depending on their intended use with miniature, intermediate, standard, heavy or extra heavy cross section ties.
What is a Bearing Staking Installation Tool? 159 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
Wrench Set,Ratchet 15 Items
What is a Sealant Dispenser? 26 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Retaining Ring Pliers Set? 10 Items: A Retaining Ring Pliers Set (PLIERS SET,RETAINING RING) is a group of PLIERS, RETAINING RING having different characteristics.
What is a Hand Armament Subsystem Carrier? 52 Items: A Hand Armament Subsystem Carrier (CARRIER,ARMAMENT SUBSYSTEM,HAND) is a metallic item with a clamp device and/or space for depositing articles. It is used for transporting weapon parts during maintanence and/or repair work, such as gun barrel, automatic loader, breechblock and the like.
What is a Ring Retaining Pliers Tip Set? 13 Items: A Ring Retaining Pliers Tip Set (TIP SET,PLIERS,RING RETAINING) is a collection of removable metallic tips in matched pairs used to provide various size capablities to PLIERS, RING RETAINING which permits the removal and installation of internal and external retaining rings.
What is a Plug Electrical Connector Extractor? 45 Items: A Plug Electrical Connector Extractor (EXTRACTOR,ELECTRICAL CONNECTOR,PLUG) is a hand tool designed to disassemble CONNECTOR, PLUG, ELECTRICAL from a CONNECTOR, RECEPTACLE, ELECTRICAL.
What is a Torque Wrench Adapter Set? 10 Items: A Torque Wrench Adapter Set (ADAPTER SET,TORQUE WRENCH) is tWO or more ADAPTER, TORQUE WRENCH of different sizes.
What is an Electronic Component Inserter And Remover? 79 Items: An Electronic Component Inserter And Remover (INSERTER AND REMOVER,ELECTRONIC COMPONENT) is an item which can insert or remove an electronic component package such as MICROCIRCUIT; RESISTOR, NETWORK (as modified); and the like from its mounting position or socket. Excludes INSERTER AND REMOVER, ELECTRICAL CONTACT; REMOVER, ELECTRICAL CONTACT; EXTRACTOR, ELECTRICAL CARD; EXTRACTOR, ELECTRONIC CRYSTAL UNIT; EXTRACTOR, ELECTRON TUBE.
What is an Impact Type Bit Set And Handle Screwdriver? 14 Items: An Impact Type Bit Set And Handle Screwdriver (SCREWDRIVER,BIT SET AND HANDLE,IMPACT TYPE) is an item consisting of a set of screwdriver bits and a impact driver to accommodate the bits of various types and characteristics. It is designed to transmit a strong rotating movement by the impact of a hammer blowed on the impact driver. It is used to loosen rusted or seized screws. Excludes SCREWDRIVER, BIT SET AND HANDLE.
What is a Hand Vise Jaw? 19 Items: A Hand Vise Jaw (JAW,VISE,HAND) is an item consisting of two opposing parts of a VISE, HAND. The item is moveable and able to open and close. It can hold, grasp or clamp work.
What is a Screwdriver Handle? 28 Items: A Screwdriver Handle (HANDLE,SCREWDRIVER) is an item used to accommodate various types of BIT, SCREWDRIVER. It is designed to rotate a bit that is used for installing or removing screws.
What is a Wire Twister Pliers? 25 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 284 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is a Mechanical Puller Body? 45 Items: A Mechanical Puller Body (BODY,PULLER,MECHANICAL) is an item designed to support and enclose the internal parts of a PULLER,MECHANICAL.
What is a Flat Tip And Cross Tip Screwdriver Set? 39 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is a Socket Wrench Screwdriver Attachment Set? 22 Items: A Socket Wrench Screwdriver Attachment Set (SCREWDRIVER ATTACHMENT SET,SOCKET WRENCH) is a set of screwdriver attachment, socket wrench of different sizes. Items consist of a female square drive on one end to attach to a handle, socket wrench and various screwdriver tip configurations on the opposite end. Excludes SCREWDRIVER ATTACHMENT,SOCKET WRENCH
What is an Oil Filter Wrench? 44 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 430 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Communications Equipment Spring Adjuster? 13 Items: A Communications Equipment Spring Adjuster (ADJUSTER,SPRING,COMMUNICATIONS EQUIPMENT) is a single or double end tool, equipped with slot(s) of various dimensions or with cylindrical rod(s), used for adjusting the springs or spring tensioned parts of electronic equipment.
What is a Rotating Members Aligning Tool? 32 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
What is a Final Drive Assembly Alignment Pin? 41 Items: A Final Drive Assembly Alignment Pin (ALIGNMENT PIN,FINAL DRIVE ASSEMBLY) is a special designed pin used in the assembling of the final drive.
Arm,Handling Tool 77 Items
What is a Splicing Sleeve Compressing Tool? 23 Items: A Splicing Sleeve Compressing Tool (COMPRESSING TOOL,SPLICING SLEEVE) is a hand tool having hinged leverage handles similar to a CUTTER, BOLT or pliers, designed to compress a splicing sleeve when joining the ends of two conductors, or when forming an eye splice in the end of a wire rope. Excludes CRIMPING TOOL, TERMINAL, HAND.
What is a Hand Screw Jack Extension? 14 Items: A Hand Screw Jack Extension (EXTENSION,HAND SCREW JACK) is a length of externally threaded rigid shafting which is the adjustable section of a JACK, SCREW, HAND.
What is a Mechanical Puller Gear Adapter? 21 Items: A Mechanical Puller Gear Adapter (GEAR ADAPTER,PULLER,MECHANICAL) is an adapter that adapts a PULLER,MECHANICAL, to pull a certain gear.
Handle,Hydraulic Jack 18 Items
What is a Female Electrical Contact Resizing Tool? 11 Items: A Female Electrical Contact Resizing Tool (RESIZING TOOL,FEMALE ELECTRICAL CONTACT) is a tool designed to shape to a specific size, female contacts such as those used on electrical connectors, tube sockets, crystal sockets, and pin jacks.
What is a Screwdriver And Socket Wrench Combination? 13 Items: A Screwdriver And Socket Wrench Combination is a hand-tool formed into an integral unit with a socket wrench at one end and a screwdriver bit at the other end. See also SCREWDRIVER AND WRENCH ASSEMBLY.
What is a Hand Hose Fitting Swaging Tool Kit? 11 Items: A Hand Hose Fitting Swaging Tool Kit (SWAGING TOOL KIT,HOSE FITTING,HAND) is a device, hydraulically actuated by hand or power operated pump, consisting of face plate, adapter plate, finger cages, fingers, ram, bushing, and expanding mandrels combined on a single base in various functional arrangements. It is used for swaging the outside diameter of hose assembly fittings, expanding the inside diameter of hose assemblies, and securing the fabrication of hose assemblies. Included are a hand or power operated pump, lubricant, cases, and trays.
What is a Catch Lever Tool? 12 Items: A Catch Lever Tool (LEVER TOOL,CATCH) is a specially designed hand tool which engages the opening and closing lever of a CATCH (as modified) for ease of operation. It is constructed of thin rigid material, usually flat, and one end has an engaging tongue.
What is a Manual Impact Wrench? 11 Items: A Manual Impact Wrench (WRENCH,IMPACT,MANUAL) is a manually operated handheld tool consisting of spring-loaded handle and a power-impact head which delivers a torsional impact from either continuous movement of the handle in one direction, or by a reciprocating action. It is used in tightening and loosening fasteners, such as bolts, nuts, and the like. The item may include sockets, extensions and offset fittings, nut runners, and the like.
What is a Drift? 63 Items: A Drift is an item consisting of a tubular body fitted with replaceable tips. It is designed to insert or remove mechanical components where space is restricted.
What is a Nutdriver? 46 Items: A Nutdriver is a non-powered hand tool with a screwdriver style handle, shaft and formed female hex or square socket at driving end.
What is a Locking Device Removal Tool? 12 Items: A Locking Device Removal Tool (REMOVAL TOOL,LOCKING DEVICE) is a hand tool designed to facilitate the removal of a WASHER, KEY and a LOCKING PLATE, NUT AND BOLT.
What is a Hydraulic Fitting Crimping Tool Head? 26 Items: A Hydraulic Fitting Crimping Tool Head (HEAD,CRIMPING TOOL,HYDRAULIC FITTING) is a component of a crimping tool used to compress fittings on fluid tubes. It consists of a U-shape item, in which, are mounted different sizes of DIE, CRIMPING TOOL for tubes of various diameters.
What is a Torque Screwdriver? 11 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.
What is a Special Purpose Combination Wrench? 13 Items: A Special Purpose Combination Wrench (WRENCH,COMBINATION,SPECIAL PURPOSE) is a tool having a combination of ends and facets. The ends may have open end, box or spanner characteristics. The sides may have features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s). Designed to fit specific items, not sized as standard or metric.
What is a Screwdriver Bit Holder? 56 Items: A Screwdriver Bit Holder (HOLDER,SCREWDRIVER BIT) is an attachment with a socket end for accepting male hexagon shank insert bits and a drive end for adapting to a portable power or hand tool.
What is a Telescoping Pole? 16 Items: A Telescoping Pole (POLE,TELESCOPING) is an item which is designed to be extended or compressed by the sliding of overlapping sections. This item may or may not be able to accommodate an extension.

Stock Items From Supply Class 5120 Page 18 of 110

5120-14-421-2059
Socket Wrench

144212059
144-4: RNCC: 3 | RNVC: 9
DEM144-4: RNCC: 5 | RNVC: 9

6 Jan 1988

5120-14-459-1608
Rivet Bucking Bar

144591608
45056127: RNCC: 3 | RNVC: 2
45056127: RNCC: 5 | RNVC: 9

19 Nov 1992

5120-14-425-9561
Aligning Punch

144259561
502174BTH20R2: RNCC: 3 | RNVC: 2

28 Jul 1988

5120-14-532-0297
Socket Wrench Set

145320297
MOD.J2PB: RNCC: 3 | RNVC: 2
PL.601: RNCC: 5 | RNVC: 2

9 Oct 2002

5120-14-446-8346
Socket Wrench

144468346
94.11: RNCC: 3 | RNVC: 2
3148511288108: RNCC: 5 | RNVC: 2
94-11: RNCC: 5 | RNVC: 2
0128810: RNCC: 5 | RNVC: 9

17 Apr 1991

5120-14-488-6520
Hand Caster Fork

144886520
4011101E-03B: RNCC: 3 | RNVC: 2

28 May 1997

5120-14-540-0010
Aligning Punch

145400010
6501DMR117: RNCC: 3 | RNVC: 2

25 Feb 2004

5120-14-387-1640
Mechanical Puller

143871640
422946: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-205-6892
Mechanical Puller

142056892
T0B220: RNCC: 3 | RNVC: 2
T0B: RNCC: 5 | RNVC: 2
ZINT0B220: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-425-9514
Aligning Punch

144259514
500251LTH20R2: RNCC: 3 | RNVC: 2

28 Jul 1988

5120-14-447-3834
Seal Inserter

144473834
MEH168: RNCC: 3 | RNVC: 2
89280360: RNCC: 5 | RNVC: 2

15 May 1991

5120-14-543-3440
Mechanical Puller

145433440
0479196000: RNCC: 3 | RNVC: 2

21 Oct 2004

5120-14-340-2352
Digging Bar

143402352
24848: RNCC: 3 | RNVC: 2
259415: RNCC: 3 | RNVC: 2

14 Feb 1977

5120-14-336-0111
Socket Wrench

143360111
C47380: RNCC: 3 | RNVC: 2

24 Jul 1976

5120-14-539-3176
Mechanical Puller

145393176
T947G3101101: RNCC: 3 | RNVC: 2

22 Dec 2003

5120-14-300-5231
Mechanical Puller

143005231
0-62041: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-499-5424
Hand Hammer

144995424
0127100301: RNCC: 3 | RNVC: 2
605: RNCC: 3 | RNVC: 2
1271003: RNCC: 5 | RNVC: 2
F300 0T 023 3653: RNCC: 6 | RNVC: 9

29 Oct 1997

5120-14-329-9300
Box Wrench Set

143299300
0531270: RNCC: 3 | RNVC: 2
106J4: RNCC: 3 | RNVC: 2
57.P5E: RNCC: 5 | RNVC: 2
57P4E: RNCC: 5 | RNVC: 2

2 Jul 1975

5120-14-357-9667
Mechanical Puller

143579667
8813285000: RNCC: 3 | RNVC: 2

20 Jul 1979

5120-14-463-9723
Mechanical Puller

144639723
854-400-334-0: RNCC: 3 | RNVC: 2

7 Jul 1993

5120-14-442-1532
Rivet Bucking Bar

144421532
853-600-265-0: RNCC: 3 | RNVC: 2

3 Oct 1990

5120-14-527-8177
Seal Inserter

145278177
888-499-400-1: RNCC: 3 | RNVC: 2

21 Nov 2001

5120-14-382-9191
Mechanical Puller

143829191
CFZ: RNCC: 3 | RNVC: 2
CFZ631: RNCC: 5 | RNVC: 2
0000334234: RNCC: 5 | RNVC: 2
0000334234: RNCC: 5 | RNVC: 9
334234: RNCC: 5 | RNVC: 9
ZINCFZ: RNCC: 5 | RNVC: 9

17 Mar 1983

5120-14-466-3799
Mechanical Puller

144663799
U21879200: RNCC: 3 | RNVC: 2

3 Nov 1993

5120-14-512-3936
Hand Beading Tool

145123936
92.630.625: RNCC: 3 | RNVC: 9

12 Feb 1999

5120-14-280-4097
Mechanical Puller

142804097
A124176: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-449-0133
Box Wrench

144490133
76052: RNCC: 3 | RNVC: 2
89280495: RNCC: 5 | RNVC: 2

24 Jul 1991

5120-14-032-3500
Seal Inserter

140323500
G33391: RNCC: 3 | RNVC: 2
33391: RNCC: 3 | RNVC: 9

17 Feb 1983

5120-14-530-6434
Seal Inserter

145306434
D47725R3: RNCC: 3 | RNVC: 2

1 Jul 2002

5120-14-329-6379
Box Wrench

143296379
MHC102-21: RNCC: 3 | RNVC: 2
MHC102-21-00: RNCC: 5 | RNVC: 2

2 Jul 1975

5120-14-260-3630
Mechanical Puller

142603630
3130S95-12-136: RNCC: 3 | RNVC: 2
3130-95-12-136: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-463-9774
Mechanical Puller

144639774
854-500-326-0: RNCC: 3 | RNVC: 2

7 Jul 1993

5120-14-419-2484
Jaw Cable Grip

144192484
413001020003: RNCC: 3 | RNVC: 2

16 Oct 1987

5120-14-554-0679
Hand Hammer

145540679
868D.40PLD1: RNCC: 3 | RNVC: 2
3148516933119: RNCC: 5 | RNVC: 2
693311: RNCC: 5 | RNVC: 2

8 Jun 2007

5120-14-434-8853
Hand Hammer

144348853
0200360301: RNCC: 3 | RNVC: 2
200-36EC: RNCC: 3 | RNVC: 2

6 Oct 1989

5120-14-483-9461
Spatula

144839461
0F30766: RNCC: 3 | RNVC: 2

10 Oct 1996

5120-14-468-5918
Hand Hydraulic Jack

144685918
CT10E: RNCC: 3 | RNVC: 9
5010133202: RNCC: 5 | RNVC: 2
RASCT10E: RNCC: 5 | RNVC: 9

9 Mar 1994

5120-14-521-6626
Seal Inserter

145216626
1101690: RNCC: 3 | RNVC: 2

1 Sep 2000

5120-14-395-0558
Mechanical Puller

143950558
8813392000: RNCC: 3 | RNVC: 2

2 Oct 1984

5120-14-412-4655
Mechanical Puller

144124655
F117175: RNCC: 3 | RNVC: 2

15 Oct 1986

5120-14-355-8412
Mechanical Puller

143558412
18126502: RNCC: 3 | RNVC: 2
18126502: RNCC: 3 | RNVC: 9

5 Apr 1979

5120-14-417-1009
Backing Out Punch

144171009
530641: RNCC: 3 | RNVC: 2

1 Jul 1987

5120-14-387-1195
Socket Wrench

143871195
VTR321-2-1142: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-382-7677
Open End Box Wrench

143827677
603GAT81-037: RNCC: 3 | RNVC: 2

17 Feb 1983

5120-14-532-1135
Mechanical Puller

145321135
S622V3002101: RNCC: 3 | RNVC: 2

9 Oct 2002

5120-14-532-5492
Plastic Mallet

145325492
207A.50CB: RNCC: 3 | RNVC: 2
3148511474259: RNCC: 5 | RNVC: 2

13 Nov 2002

5120-14-395-0557
Seal Inserter

143950557
8813325000: RNCC: 3 | RNVC: 2

2 Oct 1984

5120-14-375-1775
Socket Wrench

143751775
16380206: RNCC: 3 | RNVC: 2
16380206: RNCC: 5 | RNVC: 9

26 Feb 1982

5120-14-432-7067
Seal Inserter

144327067
OUT11815-2: RNCC: 3 | RNVC: 2
0UT11815-2: RNCC: 5 | RNVC: 2

21 Jun 1989

5120-14-438-0357
Seal Inserter

144380357
007455041P: RNCC: 3 | RNVC: 2

7 Mar 1990

5120-14-530-5278
Box Wrench

145305278
W008110017: RNCC: 3 | RNVC: 2

18 Jun 2002

5120-14-532-1153
Seal Inserter

145321153
S673V3002101: RNCC: 3 | RNVC: 2

9 Oct 2002

5120-14-329-6305
Socket Wrench

143296305
M31-004: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-202-9550
Wrecking Bar

142029550
M0B151-50: RNCC: 3 | RNVC: 2
1944-50X18: RNCC: 3 | RNVC: 2
2695 032 01: RNCC: 5 | RNVC: 2

1 Jan 1963

5120-14-442-1509
Hand Rivet Set

144421509
853-600-241-6: RNCC: 3 | RNVC: 2

3 Oct 1990

5120-14-369-3299
Mechanical Puller

143693299
365A93-3202-00: RNCC: 3 | RNVC: 2

17 Apr 1981

5120-14-235-6197
Box Wrench

142356197
17926T1REP14: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-212-8542
Socket Wrench

142128542
NO PRIMARY REF14-212-8542: RNCC: 3 | RNVC: 2
0SM3-507-60: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-443-2073
Mechanical Puller

144432073
260350: RNCC: 3 | RNVC: 2
F300 0T 006 2533: RNCC: 6 | RNVC: 9

12 Nov 1990

5120-14-434-6033
Hand Hammer

144346033
220-28X30EC: RNCC: 3 | RNVC: 2
0220280301: RNCC: 3 | RNVC: 2

26 Sep 1989

5120-14-434-6041
Hand Hammer

144346041
200-64EC: RNCC: 3 | RNVC: 2
0200640301: RNCC: 3 | RNVC: 2

26 Sep 1989

5120-14-555-4329
Tacker

145554329
R9908208: RNCC: 3 | RNVC: 2

19 Nov 2007

5120-14-347-9555
Mechanical Puller

143479555
MAS4702: RNCC: 3 | RNVC: 2

29 Mar 1978

5120-14-438-4437
Mechanical Puller

144384437
39387723: RNCC: 3 | RNVC: 2

21 Mar 1990

5120-14-291-1894
Mechanical Puller

142911894
ANF: RNCC: 3 | RNVC: 2
ZINANF: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-330-1948
Box Wrench

143301948
100-11-16X25-32: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-250-0095
Socket Wrench

142500095
0000330476: RNCC: 3 | RNVC: 2
0000330476: RNCC: 5 | RNVC: 9
330476: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-256-6914
Blacksmiths' Tongs

142566914
M0B34-500: RNCC: 3 | RNVC: 2

1 Jan 1969

5120-14-370-6160
Hand Screw Jack

143706160
12-5205-540: RNCC: 3 | RNVC: 2

18 May 1981

5120-14-406-5871
Driftpin

144065871
853-201-900-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-375-8018
Mechanical Puller

143758018
300C90500: RNCC: 3 | RNVC: 2
91369798: RNCC: 5 | RNVC: 2
300C90500: RNCC: 5 | RNVC: 2
300C90500: RNCC: 5 | RNVC: 9
300C90500: RNCC: 5 | RNVC: 9

30 Mar 1982

5120-14-317-0396
Mechanical Puller

143170396
RT4996: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-511-8827
Open End Box Wrench

145118827
70A-11: RNCC: 3 | RNVC: 2
70A11: RNCC: 5 | RNVC: 2

28 Jan 1999

5120-14-398-1277
Mechanical Puller

143981277
330A93-2039-01: RNCC: 3 | RNVC: 2

31 Jan 1985

5120-14-518-2853
Hand Hammer

145182853
0430500201: RNCC: 3 | RNVC: 2

2 Feb 2000

5120-14-486-5663
Rivet Bucking Bar

144865663
RT15011-6: RNCC: 3 | RNVC: 2

25 Mar 1997

5120-14-349-8675
Driftpin

143498675
2000110-4-6-2: RNCC: 3 | RNVC: 2
2000080-4-5: RNCC: 5 | RNVC: 2

14 Jun 1978

5120-14-438-7605
Driftpin

144387605
100941: RNCC: 3 | RNVC: 2
C63102: RNCC: 5 | RNVC: 2

4 Apr 1990

5120-14-384-9227
Mechanical Puller

143849227
9970-121-118: RNCC: 3 | RNVC: 2

2 Jun 1983

5120-14-385-3463
Mechanical Puller

143853463
6805J33-4007-00: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-218-9661
Box Wrench

142189661
55.1'1/8X1'1/4: RNCC: 3 | RNVC: 2
55-1 1-8X1 1-4: RNCC: 5 | RNVC: 2
3148511121207: RNCC: 5 | RNVC: 2
65-1-1-8-1-1-4: RNCC: 5 | RNVC: 9
0112120: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-300-9718
C Clamp

143009718
341A98-2004-00: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-406-6565
Mechanical Puller

144066565
853-200-833-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-214-2834
Inspection Mirror

142142834
829: RNCC: 3 | RNVC: 2
101885: RNCC: 5 | RNVC: 2
3148512063407: RNCC: 5 | RNVC: 2
0133717S00: RNCC: 5 | RNVC: 2
91-2379-0000: RNCC: 5 | RNVC: 2
91355427: RNCC: 5 | RNVC: 2
0206340: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-434-7777
Seal Inserter

144347777
EM551-806-008A: RNCC: 3 | RNVC: 2
EM551-806-008A: RNCC: 5 | RNVC: 9

4 Oct 1989

5120-14-309-7436
Mechanical Puller

143097436
341A93-3519-00: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-448-8514
Box Wrench

144488514
83-19: RNCC: 3 | RNVC: 2
3272670250642: RNCC: 5 | RNVC: 2

22 Jul 1991

5120-14-246-6954
Socket Wrench

142466954
253-5M837-3P43D: RNCC: 3 | RNVC: 9
PA253-5M837-3P43D: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-201-5130
Hand Rivet Set

142015130
M0B225-10: RNCC: 3 | RNVC: 2

1 Jan 1962

5120-14-406-6549
Mechanical Puller

144066549
853-200-808-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-433-0618
Mechanical Puller

144330618
U.306-140: RNCC: 3 | RNVC: 2
U306-140: RNCC: 5 | RNVC: 2
0075192: RNCC: 5 | RNVC: 2

7 Jul 1989

5120-14-523-4189
Paint Strainer

145234189
167-027: RNCC: 3 | RNVC: 2

19 Jan 2001

5120-14-390-4482
Socket Wrench

143904482
0547-29: RNCC: 3 | RNVC: 2

26 Jan 1984

5120-14-434-6043
Hand Hammer

144346043
0219180301: RNCC: 3 | RNVC: 2
219-22X24EC: RNCC: 3 | RNVC: 2

26 Sep 1989

5120-14-269-5520
Socket Wrench

142695520
707: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-331-3139
Mechanical Puller

143313139
8811652000: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-511-2916
Hammer Handle

145112916
210.MH45: RNCC: 3 | RNVC: 2
3148511480953: RNCC: 5 | RNVC: 2
0715 735 500: RNCC: 5 | RNVC: 2

14 Dec 1998

5120-14-355-6807
Ratchet Screwdriver

143556807
AAM: RNCC: 3 | RNVC: 2
AAMA: RNCC: 3 | RNVC: 2
67629: RNCC: 3 | RNVC: 2

19 Mar 1979

5120-14-517-5087
Box Wrench

145175087
GS146-20X22: RNCC: 3 | RNVC: 2
1.70.1914: RNCC: 5 | RNVC: 2

3 Jan 2000

5120-14-362-7421
Box Wrench

143627421
MHD312-03: RNCC: 3 | RNVC: 2
MHD312-03: RNCC: 5 | RNVC: 2

19 Mar 1980

5120-14-527-6478
Mechanical Puller

145276478
888-483-900-1: RNCC: 3 | RNVC: 2

7 Nov 2001

5120-14-384-3988
Drive Pin Punch

143843988
174-3-871: RNCC: 3 | RNVC: 2

4 May 1983

5120-14-322-7730
Socket Wrench

143227730
90-5,5: RNCC: 3 | RNVC: 2
3122155: RNCC: 3 | RNVC: 2
3272670256996: RNCC: 5 | RNVC: 2
90-5-5: RNCC: 5 | RNVC: 2
VIR3122155: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-444-4558
Open End Box Wrench

144444558
231441: RNCC: 3 | RNVC: 2
85-694-3555: RNCC: 6 | RNVC: 9

9 Jan 1991

5120-14-465-4637
Seal Inserter

144654637
851-500-061-0: RNCC: 3 | RNVC: 2

30 Sep 1993

5120-14-375-2856
Tacker

143752856
148000: RNCC: 3 | RNVC: 9
148000: RNCC: 5 | RNVC: 9

26 Feb 1982

5120-14-438-5014
Mechanical Puller

144385014
37AM026: RNCC: 3 | RNVC: 2
85-694-0554: RNCC: 6 | RNVC: 9

21 Mar 1990

5120-14-324-7088
Box Wrench

143247088
100-27X29: RNCC: 3 | RNVC: 2
3272670286221: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-353-3502
Drift Pin Set

143533502
RT17264: RNCC: 3 | RNVC: 2
85-689-9163: RNCC: 6 | RNVC: 9

8 Dec 1978

5120-14-521-2253
Seal Inserter

145212253
010-444-00826-105: RNCC: 3 | RNVC: 2
010-444-00826-105: RNCC: 3 | RNVC: 2
010-444-00826-105: RNCC: 5 | RNVC: 2
010-444-00826-105: RNCC: 5 | RNVC: 2

12 Jul 2000

5120-14-358-7473
Mechanical Puller

143587473
D47841: RNCC: 3 | RNVC: 2

7 Sep 1979

5120-14-370-1122
Pinch Bar

143701122
269: RNCC: 3 | RNVC: 2
3148511623008: RNCC: 5 | RNVC: 2
130075: RNCC: 5 | RNVC: 2
2695 033 02: RNCC: 5 | RNVC: 2
PINCEM0NSEIGNEURSATEM45KWDEFA: RNCC: 5 | RNVC: 9
0162300: RNCC: 5 | RNVC: 9

18 May 1981

5120-14-427-6506
Drill Guide

144276506
NO PRIMARY REF14-427-6506: RNCC: 3 | RNVC: 2
E0949633: RNCC: 5 | RNVC: 9

27 Oct 1988

5120-14-286-6579
Socket Wrench

142866579
MZ159: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-370-2316
Mechanical Puller

143702316
8812420000: RNCC: 3 | RNVC: 2

18 May 1981

5120-14-468-9713
Digging Pick Head

144689713
117074: RNCC: 3 | RNVC: 2

30 Mar 1994

5120-14-385-9681
Mechanical Puller

143859681
139660E: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-325-4475
Mechanical Puller

143254475
410-2: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-537-3474
Mechanical Puller

145373474
010564010P: RNCC: 3 | RNVC: 2

21 Oct 2003

5120-14-425-9560
Aligning Punch

144259560
502173ATH20R2: RNCC: 3 | RNVC: 2

28 Jul 1988

5120-14-341-5723
Mechanical Puller

143415723
RT4986C: RNCC: 3 | RNVC: 2

16 Mar 1977

5120-14-324-1916
Seal Inserter

143241916
7-010348-3: RNCC: 3 | RNVC: 2
RAB2170: RNCC: 5 | RNVC: 2
0UT2700: RNCC: 5 | RNVC: 9
7-010348-3: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-438-2504
Drive Pin Punch

144382504
BN311-545M25REP5.0: RNCC: 3 | RNVC: 2

10 Feb 1999

5120-14-237-4697
Driftpin

142374697
3130S95-12-029: RNCC: 3 | RNVC: 2
3130-95-12-029: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-531-7533
C Clamp

145317533
PRE CAR 143-80: RNCC: 3 | RNVC: 2
143-80: RNCC: 5 | RNVC: 2

13 Sep 2002

5120-14-540-8507
Putty Knife

145408507
6225240001: RNCC: 3 | RNVC: 2
3303806225149: RNCC: 5 | RNVC: 2

23 Apr 2004

5120-14-480-8466
Mechanical Puller

144808466
21825602: RNCC: 3 | RNVC: 2

4 Apr 1996

5120-14-394-9210
Box Wrench

143949210
20733301: RNCC: 3 | RNVC: 2

2 Oct 1984

5120-14-373-7811
Hand Hammer

143737811
200-36: RNCC: 3 | RNVC: 2

13 Nov 1981

5120-14-472-3683
Hand Hammer

144723683
866A.41: RNCC: 3 | RNVC: 2
3148512096504: RNCC: 5 | RNVC: 2
866A41: RNCC: 5 | RNVC: 2
2695 497 569: RNCC: 5 | RNVC: 2
0209650: RNCC: 5 | RNVC: 9

19 Oct 1994

5120-14-400-7639
Hand Hammer

144007639
0213280301: RNCC: 3 | RNVC: 2
M0B213EC28: RNCC: 5 | RNVC: 2

21 May 1985

5120-14-378-2909
Hand Hammer

143782909
154667: RNCC: 3 | RNVC: 2
SYB0340: RNCC: 5 | RNVC: 2
79525: RNCC: 5 | RNVC: 9

20 Jul 1982

5120-14-524-4398
Hand Screw Jack

145244398
TC3025P002: RNCC: 3 | RNVC: 2

20 Mar 2001

5120-14-256-2423
Box Wrench

142562423
901-6: RNCC: 3 | RNVC: 2

1 Jan 1969

5120-14-327-7571
Mechanical Puller

143277571
M405121: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-541-1855
Mechanical Puller

145411855
0099074: RNCC: 3 | RNVC: 2

18 May 2004

5120-14-505-9301
Mechanical Puller

145059301
V117171: RNCC: 3 | RNVC: 2

30 Mar 1998

5120-14-532-0101
Aligning Punch

145320101
1090484X00: RNCC: 3 | RNVC: 2

9 Oct 2002

5120-14-261-8786
Drill Drift

142618786
3130-95-63-009-1: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-438-2500
Drive Pin Punch

144382500
BN311-545M25REP1.0: RNCC: 3 | RNVC: 2

10 Feb 1999

5120-14-533-9754
Mechanical Puller

145339754
8813348000: RNCC: 3 | RNVC: 2

5 Mar 2003

5120-14-458-2583
Mechanical Puller

144582583
8816275000: RNCC: 3 | RNVC: 2

15 Oct 1992

5120-14-306-4217
Mechanical Puller

143064217
C46097: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-540-0047
Mechanical Puller

145400047
PYM001020003: RNCC: 3 | RNVC: 2

25 Feb 2004

5120-14-552-4413
Mechanical Puller

145524413
S639V3030124: RNCC: 3 | RNVC: 2

3 Jan 2007

5120-14-338-0895
Mechanical Puller

143380895
79042338: RNCC: 3 | RNVC: 2
79042338: RNCC: 5 | RNVC: 9

6 Nov 1976

5120-14-510-2205
Mechanical Puller

145102205
7M288: RNCC: 3 | RNVC: 2
5120AA8016553: RNCC: 6 | RNVC: 9

4 Nov 1998

5120-14-416-8874
Mechanical Puller

144168874
4601EAV1: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-458-1443
Mechanical Puller

144581443
45215401: RNCC: 3 | RNVC: 2
45215401: RNCC: 5 | RNVC: 9

8 Oct 1992

5120-14-541-6499
Mechanical Puller

145416499
0587319: RNCC: 3 | RNVC: 2

17 Jun 2004

5120-14-318-5271
Tack Claw

143185271
414-500: RNCC: 3 | RNVC: 2
08P30REP1: RNCC: 3 | RNVC: 2
SYB0323: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-250-6450
Open End Box Wrench

142506450
552-000MA316DET14: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-531-8848
Mechanical Puller

145318848
T632G3005101: RNCC: 3 | RNVC: 2

25 Sep 2002

5120-14-425-6811
Mechanical Puller

144256811
8811976000: RNCC: 3 | RNVC: 2

21 Jul 1988

5120-14-551-1641
Putty Knife

145511641
486: RNCC: 3 | RNVC: 2

30 Aug 2006

5120-14-549-8963
Box Wrench

145498963
55A.6X7: RNCC: 3 | RNVC: 2
55A.6X7: RNCC: 5 | RNVC: 2

17 May 2006

5120-14-464-2471
Mechanical Puller

144642471
854-500-382-0: RNCC: 3 | RNVC: 2

28 Jul 1993

5120-14-239-9248
Mechanical Puller

142399248
3210-95-34-050C: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-470-5598
Mechanical Puller

144705598
76545914100: RNCC: 3 | RNVC: 2

22 Jun 1994

5120-14-552-0300
Box Wrench

145520300
68B.10X11H: RNCC: 3 | RNVC: 2
00.28.36.23: RNCC: 5 | RNVC: 2
3148511162378: RNCC: 5 | RNVC: 2

21 Nov 2006

5120-14-433-9428
Stud Remover

144339428
287B.10: RNCC: 3 | RNVC: 2
0165680: RNCC: 5 | RNVC: 2
287A.10: RNCC: 5 | RNVC: 2
3148511656815: RNCC: 5 | RNVC: 2

23 Aug 1989

5120-14-287-8416
Mechanical Puller

142878416
U29: RNCC: 3 | RNVC: 2
TAR25A: RNCC: 5 | RNVC: 2
0001070100: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-490-2076
Mechanical Puller

144902076
332A92-1187-00: RNCC: 3 | RNVC: 2

17 Sep 1997

5120-14-274-8329
Hand Hammer Head

142748329
13-47-46: RNCC: 2 | RNVC: 2

1 Jan 1971

5120-14-307-7567
Socket Wrench

143077567
G16-1065: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-503-8693
Box Wrench

145038693
0110790: RNCC: 3 | RNVC: 2

4 Feb 1998

5120-14-504-7421
Aligning Punch

145047421
7525037: RNCC: 3 | RNVC: 2
5001014853: RNCC: 3 | RNVC: 2

3 Mar 1998

5120-14-404-1099
Socket Wrench

144041099
80-16-P: RNCC: 3 | RNVC: 2
80-16P: RNCC: 3 | RNVC: 2
3272670299108: RNCC: 5 | RNVC: 2
80-16CP: RNCC: 5 | RNVC: 9

11 Sep 1985

5120-14-404-1178
Socket Wrench

144041178
1718Z: RNCC: 3 | RNVC: 2
C2M-99-12.10: RNCC: 3 | RNVC: 2

11 Sep 1985

5120-14-517-3905
Socket Wrench

145173905
0XB501-252-706-16: RNCC: 3 | RNVC: 2

8 Dec 1999

5120-14-481-4799
Seal Inserter

144814799
NO PRIMARY REF14-481-4799: RNCC: 3 | RNVC: 2
RT30290: RNCC: 5 | RNVC: 9

8 May 1996

5120-14-511-0302
Drift Punch

145110302
247.G8: RNCC: 3 | RNVC: 2
247.G8: RNCC: 5 | RNVC: 2

25 Nov 1998

5120-14-542-0733
Driftpin

145420733
AXE050002001E1: RNCC: 3 | RNVC: 2

2 Jul 2004

5120-14-294-0699
Tack Claw

142940699
NO PRIMARY REF14-294-0699: RNCC: 3 | RNVC: 2
21-600: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-316-4990
Mechanical Puller

143164990
0U50119: RNCC: 3 | RNVC: 2
50119: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-436-4801
Mechanical Puller

144364801
6801350A33-1035-10: RNCC: 3 | RNVC: 2
6801K33-1035-10: RNCC: 3 | RNVC: 2

3 Jan 1990

5120-14-400-6424
Hand Hammer

144006424
429-21ENX: RNCC: 3 | RNVC: 2

8 May 1985

5120-14-363-5005
Socket Wrench

143635005
2310-03302: RNCC: 3 | RNVC: 2

9 May 1980

5120-14-472-3674
Plier Clamp

144723674
0181750: RNCC: 3 | RNVC: 2
514-240: RNCC: 5 | RNVC: 2
514.240: RNCC: 5 | RNVC: 2

19 Oct 1994

5120-14-238-2327
Socket Wrench

142382327
86-16: RNCC: 3 | RNVC: 2
92.16: RNCC: 3 | RNVC: 2
91492573: RNCC: 5 | RNVC: 2
3148511279601: RNCC: 5 | RNVC: 2
92-16: RNCC: 5 | RNVC: 2
0110796K00: RNCC: 5 | RNVC: 2
3272670252813: RNCC: 5 | RNVC: 2
0127960: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-387-2379
Mechanical Puller

143872379
3511 191 72021: RNCC: 3 | RNVC: 2
3511 191 72021: RNCC: 5 | RNVC: 2
3511-191-72021: RNCC: 5 | RNVC: 2

15 Sep 1983

5120-14-285-9762
Mechanical Puller

142859762
15144298: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-533-6637
Drill Guide

145336637
50061348: RNCC: 3 | RNVC: 2

18 Feb 2003

5120-14-381-1792
Cable Lacing Needle

143811792
SMJ6: RNCC: 3 | RNVC: 2

25 Jan 1983

5120-14-443-5601
Mechanical Puller

144435601
OXB501-520-701-11: RNCC: 3 | RNVC: 2
0XB501-520-701-11: RNCC: 5 | RNVC: 2

28 Nov 1990

5120-14-533-7284
Hammer Handle

145337284
210.MF111: RNCC: 3 | RNVC: 2

19 Feb 2003

5120-14-391-3323
Mechanical Puller

143913323
ER8244300607: RNCC: 3 | RNVC: 2

1 Mar 1984

5120-14-433-3224
Aligning Punch

144333224
853-202-851-0: RNCC: 3 | RNVC: 2

19 Jul 1989

5120-14-337-1669
Hand Hammer

143371669
203A.18: RNCC: 3 | RNVC: 2
3148511469200: RNCC: 5 | RNVC: 2
0146920: RNCC: 5 | RNVC: 9
203-18: RNCC: 5 | RNVC: 9

7 Oct 1976

5120-14-415-0258
Mechanical Puller

144150258
65-6-02-045G00-626318C: RNCC: 3 | RNVC: 2
413820A: RNCC: 5 | RNVC: 2
0413820A00: RNCC: 5 | RNVC: 2
045G00-413820A: RNCC: 5 | RNVC: 2
91572546: RNCC: 5 | RNVC: 2

26 Mar 1987

5120-14-360-6465
Mechanical Puller

143606465
8810215000: RNCC: 3 | RNVC: 2
881-0-215-000: RNCC: 5 | RNVC: 2

19 Dec 1979

5120-14-452-2550
Box Wrench

144522550
62-3-8X7-16: RNCC: 3 | RNVC: 2
62.3/8X7/16: RNCC: 5 | RNVC: 2

8 Jan 1992

5120-14-461-1864
Box Wrench Set

144611864
S.300-23: RNCC: 3 | RNVC: 2
3148515148880: RNCC: 5 | RNVC: 2
S300-23: RNCC: 5 | RNVC: 2
0514888: RNCC: 5 | RNVC: 9

1 Mar 1993

5120-14-368-5817
Mechanical Puller

143685817
14-18-992-0B: RNCC: 3 | RNVC: 2

20 Feb 1981

5120-14-476-8654
Mechanical Puller

144768654
459977: RNCC: 3 | RNVC: 2
459977: RNCC: 5 | RNVC: 9

5 Jul 1995

5120-14-347-2976
Socket Wrench

143472976
75.5/16: RNCC: 3 | RNVC: 2
3148511202203: RNCC: 5 | RNVC: 2
75 5-16: RNCC: 5 | RNVC: 2
0120220: RNCC: 5 | RNVC: 9

19 Jan 1978

5120-14-389-2250
Drift Pin Set

143892250
TMY20-55-301: RNCC: 3 | RNVC: 2
26-39: RNCC: 5 | RNVC: 2
85-691-8289: RNCC: 6 | RNVC: 9

29 Nov 1983

5120-14-522-3817
Mechanical Puller

145223817
TC3081G001: RNCC: 3 | RNVC: 2

25 Oct 2000

5120-14-444-8928
Mechanical Puller

144448928
0427839W00: RNCC: 3 | RNVC: 2

28 Jan 1991

5120-14-425-9553
Driftpin

144259553
500484NTH20R2: RNCC: 3 | RNVC: 2

28 Jul 1988

5120-14-406-7844
Mechanical Puller

144067844
TZ695: RNCC: 3 | RNVC: 2
TZ695: RNCC: 5 | RNVC: 9

8 Jan 1986

5120-14-524-4196
Piston Inserter

145244196
Q47802: RNCC: 3 | RNVC: 2

16 Mar 2001

5120-14-293-7569
Hand Beading Tool

142937569
7062BA1MANDRINT2-36: RNCC: 2 | RNVC: 2

1 Jan 1973

5120-14-537-4737
Aligning Punch

145374737
6501CMV210024: RNCC: 3 | RNVC: 2

3 Nov 2003

5120-14-354-1118
Mechanical Puller

143541118
0M00136: RNCC: 3 | RNVC: 2

16 Jan 1979

5120-14-357-9935
Box Wrench

143579935
MHC301-21: RNCC: 3 | RNVC: 2
MHC301-21: RNCC: 5 | RNVC: 2

20 Jul 1979

5120-14-232-7903
Mechanical Puller

142327903
NO PRIMARY REF14-232-7903: RNCC: 3 | RNVC: 2
B2C305445: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-221-2263
Drain Plug Wrench

142212263
00061: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-294-0722
Machinist's Vise

142940722
NO PRIMARY REF14-294-0722: RNCC: 3 | RNVC: 2
15-3522B: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-402-8568
Tool Handle Wedge

144028568
5-32X43: RNCC: 3 | RNVC: 2

19 Jul 1985

5120-14-468-2177
Ratchet Wrench

144682177
S.161: RNCC: 3 | RNVC: 2
3148510569000: RNCC: 5 | RNVC: 2
1068616Y00: RNCC: 5 | RNVC: 2
0712 012: RNCC: 5 | RNVC: 2
0056900: RNCC: 5 | RNVC: 9
056900: RNCC: 5 | RNVC: 9

14 Feb 1994

5120-14-433-8154
Mechanical Puller

144338154
330A98-2085-02: RNCC: 3 | RNVC: 2

9 Aug 1989

5120-14-380-0746
Mechanical Puller

143800746
70915: RNCC: 3 | RNVC: 2

8 Nov 1982

5120-14-436-4737
Hand Beading Tool

144364737
853-600-165-0: RNCC: 3 | RNVC: 2

3 Jan 1990

5120-14-528-0643
Mechanical Puller

145280643
888-512-200-1: RNCC: 3 | RNVC: 2

12 Dec 2001

5120-14-481-6053
Mechanical Puller

144816053
NO PRIMARY REF14-481-6053: RNCC: 3 | RNVC: 2
825187: RNCC: 5 | RNVC: 9

16 May 1996

5120-14-322-7352
Mechanical Puller

143227352
NO PRIMARY REF14-322-7352: RNCC: 3 | RNVC: 2
3014-78: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-443-9755
Box Wrench

144439755
GS102-22: RNCC: 3 | RNVC: 2

18 Dec 1990

5120-14-320-7231
Socket Wrench

143207231
19898J: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-550-8831
Seal Inserter

145508831
8817235000: RNCC: 3 | RNVC: 2

26 Jul 2006

5120-14-358-4589
Drain Plug Wrench

143584589
0924-78: RNCC: 3 | RNVC: 9

13 Aug 1979

5120-14-358-5265
Mechanical Puller

143585265
8812034100: RNCC: 3 | RNVC: 2

7 Sep 1979

5120-14-331-5590
Socket Wrench

143315590
75.20: RNCC: 3 | RNVC: 2
3148511197400: RNCC: 5 | RNVC: 2
75-20: RNCC: 5 | RNVC: 2
2695 606 620: RNCC: 5 | RNVC: 2
0119740: RNCC: 5 | RNVC: 9

2 Jul 1975

5120-14-343-9667
Socket Wrench

143439667
73R25-64: RNCC: 3 | RNVC: 2
85-654-4210: RNCC: 6 | RNVC: 9

13 Jul 1977

5120-14-289-9991
Mechanical Puller

142899991
NO PRIMARY REF14-289-9991: RNCC: 3 | RNVC: 2
BL19921: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-207-5119
Socket Wrench Set

142075119
NO PRIMARY REF14-207-5119: RNCC: 3 | RNVC: 2
W12-18BU: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-201-5661
Scratch Awl

142015661
NO PRIMARY REF14-201-5661: RNCC: 3 | RNVC: 2
108-4M: RNCC: 5 | RNVC: 9

1 Jan 1962

5120-14-200-3028
Box Wrench

142003028
65-9X12: RNCC: 3 | RNVC: 2
33-9X12: RNCC: 5 | RNVC: 9
85-686-0614: RNCC: 6 | RNVC: 9

1 Jan 1962

5120-14-541-1717
Plier Clamp

145411717
512: RNCC: 3 | RNVC: 2

14 May 2004

5120-14-452-6571
Mechanical Puller

144526571
F46179: RNCC: 3 | RNVC: 2

15 Jan 1992

5120-14-322-7348
Mechanical Puller

143227348
NO PRIMARY REF14-322-7348: RNCC: 3 | RNVC: 2
3010-78: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-294-0700
Tack Claw

142940700
NO PRIMARY REF14-294-0700: RNCC: 3 | RNVC: 2
130-1000: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-466-3825
Mechanical Puller

144663825
62AM026: RNCC: 3 | RNVC: 2

3 Nov 1993

5120-14-546-2136
Seal Inserter

145462136
MGF604240001: RNCC: 3 | RNVC: 2

15 Jun 2005

5120-14-346-1690
Mechanical Puller

143461690
110148: RNCC: 3 | RNVC: 2

12 Dec 1977

5120-14-405-5293
Seal Inserter

144055293
202455: RNCC: 3 | RNVC: 2

27 Nov 1985

5120-14-441-6657
Drive Pin Punch Set

144416657
248.JT7: RNCC: 3 | RNVC: 2
248JT7: RNCC: 5 | RNVC: 2
0240671X00: RNCC: 5 | RNVC: 2
91714527: RNCC: 5 | RNVC: 2
3148515389153: RNCC: 5 | RNVC: 2
0538915: RNCC: 5 | RNVC: 9

10 Sep 1990

5120-14-265-0892
Mechanical Puller

142650892
330A93-3410-00: RNCC: 3 | RNVC: 2
330A93-3410-0000: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-349-5791
Mechanical Puller

143495791
38706: RNCC: 3 | RNVC: 2
85-688-8474: RNCC: 6 | RNVC: 9

22 May 1978

5120-14-411-2331
Driftpin

144112331
800B325100: RNCC: 3 | RNVC: 2

6 Aug 1986

5120-14-445-5378
Mechanical Puller

144455378
39442310: RNCC: 3 | RNVC: 2

14 Feb 1991

5120-14-410-7988
Hammer Handle

144107988
C48: RNCC: 3 | RNVC: 2

9 Jul 1986

5120-14-300-7108
Driftpin

143007108
24107008400: RNCC: 3 | RNVC: 2
107J84: RNCC: 5 | RNVC: 9
241070084: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-316-4991
Mechanical Puller

143164991
0U50120: RNCC: 3 | RNVC: 2
50120: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-427-2218
Mechanical Puller

144272218
46MS047-18: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-413-3186
Box Wrench

144133186
50.92: RNCC: 3 | RNVC: 2
3148511071809: RNCC: 5 | RNVC: 2
50-92: RNCC: 5 | RNVC: 2
0107180: RNCC: 5 | RNVC: 9

26 Nov 1986

5120-14-508-6551
Ratchet Wrench

145086551
ISO20OUTA02: RNCC: 3 | RNVC: 2
F0033230: RNCC: 5 | RNVC: 9

23 Sep 1998

5120-14-501-9998
Socket Wrench Set

145019998
S159+SH10+SH13+SH16+SH22: RNCC: 3 | RNVC: 2
532007109: RNCC: 3 | RNVC: 2
032007109: RNCC: 5 | RNVC: 2

21 Nov 1997

5120-14-244-2418
Socket Wrench

142442418
BE42-8: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-406-9486
Hand Rivet Set

144069486
853-202-162-0: RNCC: 3 | RNVC: 2

22 Jan 1986

5120-14-527-6488
Seal Inserter

145276488
888-485-200-1: RNCC: 3 | RNVC: 2

7 Nov 2001

5120-14-363-6858
Box Wrench

143636858
7140025323A032: RNCC: 3 | RNVC: 2
0140025323A032: RNCC: 3 | RNVC: 9
7140025232A034: RNCC: 3 | RNVC: 9
14-20-32-25: RNCC: 5 | RNVC: 9
14-20-32-25A: RNCC: 5 | RNVC: 9

6 Jul 1980

5120-14-218-1954
Open End Box Wrench

142181954
37-21X23: RNCC: 3 | RNVC: 2
17-9-50: RNCC: 5 | RNVC: 2
V2-95431-06: RNCC: 5 | RNVC: 2

1 Jan 1965

5120-14-205-5706
Mechanical Puller

142055706
253-5M361A2: RNCC: 3 | RNVC: 9
RU253-5M361A2: RNCC: 5 | RNVC: 9
RU253-5M21A6A: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-548-0451
Mechanical Puller

145480451
202040-23: RNCC: 3 | RNVC: 2
5000261741: RNCC: 5 | RNVC: 2

7 Dec 2005

5120-14-462-8957
Plastic Mallet

144628957
208A.50CC: RNCC: 3 | RNVC: 2
208A50CC: RNCC: 5 | RNVC: 2
91743499: RNCC: 5 | RNVC: 2
0147726: RNCC: 5 | RNVC: 2
0536600: RNCC: 5 | RNVC: 2
3148511477267: RNCC: 5 | RNVC: 2

5 May 1993

5120-14-455-6237
Mechanical Puller

144556237
M12950: RNCC: 3 | RNVC: 2

30 May 1992

5120-14-210-9838
Socket Wrench

142109838
80-42P: RNCC: 3 | RNVC: 2
3107242: RNCC: 3 | RNVC: 2
122-42: RNCC: 3 | RNVC: 9
80-42: RNCC: 5 | RNVC: 2
SYQ0750: RNCC: 5 | RNVC: 2
DEM122-42: RNCC: 5 | RNVC: 9
VIR3107242: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-437-0722
Aligning Punch

144370722
851-750-108-0: RNCC: 3 | RNVC: 2

17 Jan 1990

5120-14-488-4551
Hand Hammer

144884551
4162002: RNCC: 3 | RNVC: 2
0416200201: RNCC: 3 | RNVC: 2

12 May 1997

5120-14-527-9773
Socket Wrench

145279773
R.300.1: RNCC: 3 | RNVC: 2
3148515123009: RNCC: 5 | RNVC: 2

5 Dec 2001

5120-14-400-6427
Hand Hammer

144006427
213-28ENX: RNCC: 3 | RNVC: 2

8 May 1985

5120-14-459-5663
Hand Hammer

144595663
295A200: RNCC: 3 | RNVC: 2

10 Dec 1992

5120-14-382-6793
Mechanical Puller

143826793
8812167000: RNCC: 3 | RNVC: 2

17 Feb 1983

5120-14-437-4322
Mechanical Puller

144374322
16849709: RNCC: 3 | RNVC: 2
16849709: RNCC: 5 | RNVC: 9

31 Jan 1990

5120-14-545-6490
Mechanical Puller

145456490
N117179: RNCC: 3 | RNVC: 2

26 Apr 2005

5120-14-432-2516
Hand Tube Bender

144322516
2514015: RNCC: 3 | RNVC: 2

31 May 1989

5120-14-448-7780
Tacker

144487780
18/51873: RNCC: 3 | RNVC: 2

10 Jul 1991

5120-14-550-7410
Stud Inserter

145507410
5000263401: RNCC: 3 | RNVC: 2

11 Jul 2006

5120-14-321-9997
Mechanical Puller

143219997
503366: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-508-4740
Open End Box Wrench

145084740
42.1/2X9/16: RNCC: 3 | RNVC: 2
0101773: RNCC: 5 | RNVC: 2
3148511017739: RNCC: 5 | RNVC: 2

14 Sep 1998

5120-14-031-3355
Driftpin

140313355
MS1377-50-517: RNCC: 3 | RNVC: 2

14 Jun 1980

5120-14-200-5702
Box Wrench

142005702
105-5X7: RNCC: 3 | RNVC: 2
105N5X7: RNCC: 3 | RNVC: 2

1 Jan 1962

5120-14-449-0083
Pipe Wrench

144490083
OU307B-TH: RNCC: 3 | RNVC: 2
96147917: RNCC: 5 | RNVC: 2

24 Jul 1991

5120-14-425-9522
Aligning Punch

144259522
500423RTH20R2: RNCC: 3 | RNVC: 2

28 Jul 1988

5120-14-425-9530
Aligning Punch

144259530
500431BTH20R2: RNCC: 3 | RNVC: 2

28 Jul 1988

5120-14-510-7202
Mechanical Puller

145107202
6256-090E339: RNCC: 3 | RNVC: 2
6256-090E339: RNCC: 5 | RNVC: 2

9 Nov 1998

5120-14-218-9645
Socket Wrench

142189645
72-1: RNCC: 3 | RNVC: 2
80-1: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-363-3958
Hand Hydraulic Jack

143633958
LP5-2: RNCC: 3 | RNVC: 9
RASLP5-2: RNCC: 5 | RNVC: 9

3 Apr 1980

5120-14-432-7081
Seal Inserter

144327081
OUT11821-4: RNCC: 3 | RNVC: 2
0UT11821-4: RNCC: 5 | RNVC: 2

21 Jun 1989

5120-14-439-5872
Mechanical Puller

144395872
350A93-3303-02: RNCC: 3 | RNVC: 2

16 May 1990

5120-14-423-9898
Machinist's Vise

144239898
61-150BASE TOURNANTE: RNCC: 3 | RNVC: 2
91562154: RNCC: 5 | RNVC: 2
SAM61-150BASE TOURNANTE: RNCC: 5 | RNVC: 9

5 May 1988

5120-14-397-0156
Mechanical Puller

143970156
1214-405-000: RNCC: 3 | RNVC: 2
1214-405A100: RNCC: 5 | RNVC: 2

27 Nov 1984

5120-14-432-7328
Seal Inserter

144327328
NO PRIMARY REF14-432-7328: RNCC: 3 | RNVC: 2
0U139377: RNCC: 5 | RNVC: 9
OU139377: RNCC: 5 | RNVC: 9

21 Jun 1989

5120-14-418-1882
Mechanical Puller

144181882
332A93-3113-00: RNCC: 3 | RNVC: 2

6 Aug 1987

5120-14-540-8504
Putty Knife

145408504
6220080001: RNCC: 3 | RNVC: 2
3303806220137: RNCC: 5 | RNVC: 2

23 Apr 2004

5120-14-549-5742
Drive Pin Punch Set

145495742
8421 CVN: RNCC: 3 | RNVC: 2
00.08.24.48: RNCC: 5 | RNVC: 2

18 Apr 2006

5120-14-486-5624
Rivet Bucking Bar

144865624
RT13667: RNCC: 3 | RNVC: 2

24 Mar 1997

5120-14-529-8985
Mechanical Puller

145298985
TO/A34000410: RNCC: 3 | RNVC: 2

17 Apr 2002

5120-14-391-6470
Socket Wrench

143916470
90-23: RNCC: 3 | RNVC: 2
3272670272545: RNCC: 5 | RNVC: 2

21 Mar 1984

5120-14-218-9657
Box Wrench

142189657
55.19/32X25/32: RNCC: 3 | RNVC: 2
3148511119600: RNCC: 5 | RNVC: 2
55 19-32X25-32: RNCC: 5 | RNVC: 2
55-19/32X25/32: RNCC: 5 | RNVC: 2
0111960: RNCC: 5 | RNVC: 9
65-19-32-25-32: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-506-7268
Mechanical Puller

145067268
083-283: RNCC: 3 | RNVC: 2

13 May 1998

5120-14-264-6241
Timber Wedge

142646241
467-3000: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-373-0139
Driftpin

143730139
TF10A27306A17: RNCC: 3 | RNVC: 2
85-691-4874: RNCC: 6 | RNVC: 9

21 Sep 1981

5120-14-309-7463
Driftpin

143097463
341A98-2034-20: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-481-1773
Socket Wrench

144811773
GS141-24: RNCC: 3 | RNVC: 2

25 Apr 1996

5120-14-449-3029
Box Wrench

144493029
8814834000: RNCC: 3 | RNVC: 2

7 Aug 1991

5120-14-483-1033
Mechanical Puller

144831033
50468: RNCC: 3 | RNVC: 2
0U50468: RNCC: 5 | RNVC: 2
OU50468: RNCC: 5 | RNVC: 2

8 Aug 1996

5120-14-424-3788
Mechanical Puller

144243788
365A93-3242-02: RNCC: 3 | RNVC: 2

19 May 1988

5120-14-448-5542
Mechanical Puller

144485542
Z111399: RNCC: 3 | RNVC: 2

1 Jul 1991

5120-14-419-2687
Driftpin

144192687
537000: RNCC: 3 | RNVC: 2

16 Oct 1987

5120-14-471-9912
Plastic Mallet

144719912
207A.32: RNCC: 3 | RNVC: 2
207A32: RNCC: 5 | RNVC: 2
3148511473405: RNCC: 5 | RNVC: 2
0147340: RNCC: 5 | RNVC: 9

28 Sep 1994

5120-14-391-2970
Jaw Cable Grip

143912970
109DIA5A6: RNCC: 3 | RNVC: 2

1 Mar 1984

5120-14-347-8590
Drain Plug Wrench

143478590
3210-95-55-015: RNCC: 3 | RNVC: 2

1 Mar 1978

5120-14-514-3820
Open End Box Wrench

145143820
ENFD29468-8X10: RNCC: 3 | RNVC: 2

19 May 1999

5120-14-386-1549
Mechanical Puller

143861549
6801J32-1665-00: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-310-4395
Mechanical Puller

143104395
E25E1-72A37: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-441-2266
Mechanical Puller

144412266
6802V32-3160-20: RNCC: 3 | RNVC: 2

22 Aug 1990

5120-14-432-2705
Socket Wrench Set

144322705
NO PRIMARY REF14-432-2705: RNCC: 3 | RNVC: 2
91634316: RNCC: 5 | RNVC: 2
S.429E: RNCC: 5 | RNVC: 2
91566658: RNCC: 5 | RNVC: 2
0516370: RNCC: 5 | RNVC: 2
S429E: RNCC: 5 | RNVC: 2

31 May 1989

5120-14-439-1760
Hand Hydraulic Jack

144391760
MR13: RNCC: 3 | RNVC: 2
91507832: RNCC: 5 | RNVC: 2

25 Apr 1990

5120-14-544-7134
Torque Screwdriver

145447134
330030921: RNCC: 3 | RNVC: 2

17 Feb 2005

5120-14-552-5119
Seal Inserter

145525119
853-203-302-0: RNCC: 3 | RNVC: 2

10 Jan 2007

5120-14-404-1095
Socket Wrench

144041095
80-10-P: RNCC: 3 | RNVC: 2
80-10P: RNCC: 3 | RNVC: 2
3272670265035: RNCC: 5 | RNVC: 2
80-10CP: RNCC: 5 | RNVC: 9

11 Sep 1985

5120-14-238-5417
Mechanical Puller

142385417
ANG: RNCC: 3 | RNVC: 2
ZINANG: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-395-0739
Mechanical Puller

143950739
F46129-1000: RNCC: 3 | RNVC: 2

2 Oct 1984

5120-14-345-5228
Lamp Extractor

143455228
0UT57: RNCC: 3 | RNVC: 2
85-689-3447: RNCC: 6 | RNVC: 9

5 Oct 1977

5120-14-207-7575
Socket Wrench

142077575
B14R8: RNCC: 3 | RNVC: 2
B14-18R: RNCC: 5 | RNVC: 2

1 Jan 1964

5120-14-528-0685
Seal Inserter

145280685
888-478-500-1: RNCC: 3 | RNVC: 2

12 Dec 2001

5120-14-207-1046
Socket Wrench

142071046
NO PRIMARY REF14-207-1046: RNCC: 3 | RNVC: 2
205A: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-293-0697
Socket Wrench

142930697
6800-0001: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-425-9451
Aligning Punch

144259451
TH20C2-1-5A6: RNCC: 3 | RNVC: 2

28 Jul 1988

5120-14-285-7725
Box Wrench

142857725
RT7104: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-541-0226
Float

145410226
6134350001: RNCC: 3 | RNVC: 2
3303806134052: RNCC: 5 | RNVC: 2

5 May 2004

5120-14-213-5202
Mechanical Puller

142135202
50735: RNCC: 3 | RNVC: 2

1 Jan 1964

5120-14-542-0857
Aligning Punch

145420857
D67490: RNCC: 3 | RNVC: 2
D67490: RNCC: 5 | RNVC: 2

2 Jul 2004

5120-14-549-6158
Gas Torch

145496158
RIPACK2000: RNCC: 3 | RNVC: 2

24 Apr 2006

5120-14-532-3873
Seal Inserter

145323873
MGF613-23: RNCC: 3 | RNVC: 2

30 Oct 2002

5120-14-485-0005
Mechanical Puller

144850005
26145900635: RNCC: 3 | RNVC: 2
RAQ0465: RNCC: 5 | RNVC: 2

19 Dec 1996

5120-14-417-1039
Mechanical Puller

144171039
540605: RNCC: 3 | RNVC: 2

1 Jul 1987

5120-14-417-1021
Mechanical Puller

144171021
536990: RNCC: 3 | RNVC: 2

1 Jul 1987

5120-14-550-5979
Drive Pin Punch Set

145505979
8425 CVN: RNCC: 3 | RNVC: 2
00.08.23.47: RNCC: 5 | RNVC: 2

29 Jun 2006

5120-14-352-5147
Mechanical Puller

143525147
8811857000: RNCC: 3 | RNVC: 2

16 Oct 1978

5120-14-396-1738
Box Wrench

143961738
210440: RNCC: 3 | RNVC: 2

27 Nov 1984

5120-14-417-1002
Mechanical Puller

144171002
530527: RNCC: 3 | RNVC: 2

1 Jul 1987

5120-14-425-9437
Aligning Punch

144259437
TH20C2-1-3A4: RNCC: 3 | RNVC: 2

28 Jul 1988

5120-14-373-0072
Socket Wrench

143730072
9970-115-715: RNCC: 3 | RNVC: 2
85-691-1606: RNCC: 6 | RNVC: 9

21 Sep 1981

5120-14-399-3309
Box Wrench

143993309
100-482: RNCC: 3 | RNVC: 2

6 Mar 1985

5120-14-450-2181
Mechanical Puller

144502181
03-0163-10: RNCC: 3 | RNVC: 2
91605069: RNCC: 5 | RNVC: 2

25 Sep 1991

5120-14-361-4915
Seal Inserter

143614915
8812191000: RNCC: 3 | RNVC: 2
85-691-1405: RNCC: 6 | RNVC: 9

24 Jan 1980

5120-14-451-9793
Mechanical Puller

144519793
576572: RNCC: 3 | RNVC: 2

17 Dec 1991

5120-14-417-7438
Driftpin

144177438
STM03263: RNCC: 3 | RNVC: 2
STM03263: RNCC: 5 | RNVC: 2

22 Jul 1987

5120-14-448-2818
Mechanical Puller

144482818
01101: RNCC: 3 | RNVC: 2

18 Jun 1991

5120-14-534-4900
Aligning Punch

145344900
6401EMC120010: RNCC: 3 | RNVC: 2

26 Mar 2003

5120-14-406-5702
Mechanical Puller

144065702
853-200-741-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-244-6562
Drill Drift

142446562
970 45: RNCC: 3 | RNVC: 2
3255-4: RNCC: 3 | RNVC: 9
SYQ0924: RNCC: 5 | RNVC: 2
162-04-4: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-369-8704
Ratchet Wrench

143698704
M20-4901-0001-00: RNCC: 3 | RNVC: 2

18 May 1981

5120-14-364-4743
Drive Pin Punch Set

143644743
249.JS7: RNCC: 3 | RNVC: 2
249JS7: RNCC: 5 | RNVC: 2
3148515389207: RNCC: 5 | RNVC: 2
0714 63 41: RNCC: 5 | RNVC: 2
0538920: RNCC: 5 | RNVC: 9

2 Sep 1980

5120-14-441-2332
Mechanical Puller

144412332
6808V32-2120-00: RNCC: 3 | RNVC: 2

22 Aug 1990

5120-14-484-6507
Box Wrench

144846507
59.6X7: RNCC: 3 | RNVC: 2
59-6X7: RNCC: 5 | RNVC: 2
0113850: RNCC: 5 | RNVC: 2
3148511138502: RNCC: 5 | RNVC: 2

28 Nov 1996

5120-14-399-6751
Mechanical Puller

143996751
NO PRIMARY REF14-399-6751: RNCC: 3 | RNVC: 2
123768: RNCC: 5 | RNVC: 9

6 Mar 1985

5120-14-520-9557
Drill Guide

145209557
009977010P: RNCC: 3 | RNVC: 2

23 Jun 2000

5120-14-352-5450
Box Wrench

143525450
0M596: RNCC: 3 | RNVC: 2
0M596: RNCC: 5 | RNVC: 2

16 Oct 1978

5120-14-445-0871
Plastic Mallet

144450871
208A.50: RNCC: 3 | RNVC: 2
208A50: RNCC: 5 | RNVC: 2
3148511477205: RNCC: 5 | RNVC: 2
91629310: RNCC: 5 | RNVC: 2
2695 672 40: RNCC: 5 | RNVC: 2
0147720: RNCC: 5 | RNVC: 9

31 Jan 1991

5120-14-250-8308
Box Wrench

142508308
62-21X23: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-294-6524
Socket Wrench

142946524
412728-34: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-424-3462
Socket Wrench Set

144243462
0503410: RNCC: 3 | RNVC: 2
HB.3A: RNCC: 5 | RNVC: 2
HB3A: RNCC: 5 | RNVC: 2

19 May 1988

5120-14-524-8853
Hand Hammer

145248853
9981801: RNCC: 3 | RNVC: 2

25 Apr 2001

5120-14-317-0451
Socket Wrench

143170451
RT5454: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-386-9741
Mechanical Puller

143869741
26545908000: RNCC: 3 | RNVC: 2
265459080: RNCC: 5 | RNVC: 9

24 Aug 1983

5120-14-439-6210
Mechanical Puller

144396210
6801G31-1350-20: RNCC: 3 | RNVC: 2

16 May 1990

5120-14-440-3402
Mechanical Puller

144403402
F46845: RNCC: 3 | RNVC: 2

11 Jul 1990

5120-14-369-6962
Socket Wrench

143696962
W-1865: RNCC: 3 | RNVC: 9
BB209: RNCC: 3 | RNVC: 9

17 Apr 1981

5120-14-274-8489
Machinist's Vise

142748489
4215-100: RNCC: 3 | RNVC: 9
61-100FIXE: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-218-9632
Socket Wrench

142189632
72-5-16: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-544-5120
Socket Wrench Set

145445120
NO PRIMARY REF 14-544-5120: RNCC: 3 | RNVC: 2
T4826D: RNCC: 3 | RNVC: 9
4826DST: RNCC: 3 | RNVC: 9
997463: RNCC: 3 | RNVC: 9
321-2919: RNCC: 5 | RNVC: 2
4826D: RNCC: 5 | RNVC: 9
AA002334: RNCC: 6 | RNVC: 9

7 Feb 2005

5120-14-318-6241
Mechanical Puller

143186241
C46310: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-532-1116
Torque Handle

145321116
N673401GC153: RNCC: 3 | RNVC: 2

9 Oct 2002

5120-14-251-9485
Box Wrench

142519485
50.63: RNCC: 3 | RNVC: 2
108-63: RNCC: 3 | RNVC: 2
119-63: RNCC: 3 | RNVC: 9
3272670251649: RNCC: 5 | RNVC: 2
3148511068908: RNCC: 5 | RNVC: 2
50-63: RNCC: 5 | RNVC: 2
0106890: RNCC: 5 | RNVC: 9
DEM119-63: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-342-9472
Hand Hammer Head

143429472
220-20X22: RNCC: 3 | RNVC: 2

16 May 1977

5120-14-345-5187
Box Wrench

143455187
XS1012: RNCC: 3 | RNVC: 2
85-688-9548: RNCC: 6 | RNVC: 9

5 Oct 1977

5120-14-284-3336
Box Wrench

142843336
50.110: RNCC: 3 | RNVC: 2
108-110: RNCC: 3 | RNVC: 2
119-110: RNCC: 3 | RNVC: 9
3148511073605: RNCC: 5 | RNVC: 2
3272670227361: RNCC: 5 | RNVC: 2
50-110: RNCC: 5 | RNVC: 2
0107360: RNCC: 5 | RNVC: 9
DEM119-110: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-395-1871
Hand Rivet Set

143951871
0U50117: RNCC: 3 | RNVC: 2
7M335: RNCC: 5 | RNVC: 2

2 Oct 1984

5120-14-534-3247
Socket Wrench

145343247
NNM0053905414160: RNCC: 2 | RNVC: 2

19 Mar 2003

5120-14-451-5112
Mechanical Puller

144515112
540546: RNCC: 3 | RNVC: 2

21 Nov 1991

5120-14-451-5218
Seal Inserter

144515218
549621: RNCC: 3 | RNVC: 2

21 Nov 1991

5120-14-433-3225
Aligning Punch

144333225
853-202-852-0: RNCC: 3 | RNVC: 2

19 Jul 1989

5120-14-336-3227
Hand Hammer Head

143363227
E71-015-630: RNCC: 2 | RNVC: 2
200-36: RNCC: 3 | RNVC: 2
0293600: RNCC: 5 | RNVC: 9

24 Jul 1976

5120-14-477-4877
Socket Wrench

144774877
301202-0: RNCC: 3 | RNVC: 2

5 Sep 1995

5120-14-210-0525
Box Wrench

142100525
111363: RNCC: 3 | RNVC: 2
A34A: RNCC: 3 | RNVC: 2

1 Jan 1964

5120-14-522-3807
Gear Inserter

145223807
TC3064G001: RNCC: 3 | RNVC: 2

25 Oct 2000

5120-14-469-9041
Box Wrench

144699041
55.17VSE: RNCC: 3 | RNVC: 2
3148511123478: RNCC: 5 | RNVC: 2
0112347: RNCC: 5 | RNVC: 9

18 May 1994

5120-14-508-6555
Plastic Mallet

145086555
208A-32BC: RNCC: 3 | RNVC: 2

23 Sep 1998

5120-14-281-7621
Mechanical Puller

142817621
A124181: RNCC: 3 | RNVC: 2
100100: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-527-1827
Seal Inserter

145271827
10441526: RNCC: 3 | RNVC: 2

10 Oct 2001

5120-14-300-3836
Box Wrench

143003836
T.51B: RNCC: 3 | RNVC: 2
F117ACM0010: RNCC: 3 | RNVC: 2
3148510603001: RNCC: 5 | RNVC: 2
T51B: RNCC: 5 | RNVC: 2
45056041: RNCC: 5 | RNVC: 2
F117052: RNCC: 5 | RNVC: 2
0060300: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-531-1872
Socket Wrench Set

145311872
504421: RNCC: 3 | RNVC: 2
J.430UP: RNCC: 5 | RNVC: 2
3148515044212: RNCC: 5 | RNVC: 2

31 Jul 2002

5120-14-450-5074
Socket Wrench

144505074
412168: RNCC: 3 | RNVC: 9

9 Oct 1991

5120-14-461-6459
Hammer Handle

144616459
6641: RNCC: 3 | RNVC: 2

19 Mar 1993

5120-14-201-5656
Scratch Awl

142015656
NO PRIMARY REF14-201-5656: RNCC: 3 | RNVC: 2
109-8M: RNCC: 5 | RNVC: 9

1 Jan 1962

5120-14-386-1600
Anchor Strap

143861600
6801P32-6000-00: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-507-3364
Box Wrench

145073364
NNP5120878750461: RNCC: 3 | RNVC: 2

29 Jun 1998

5120-14-519-1295
Box Wrench

145191295
FRDH101: RNCC: 3 | RNVC: 2
FRDH101: RNCC: 3 | RNVC: 2

8 Mar 2000

5120-14-286-6581
Mechanical Puller

142866581
MZ210: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-244-0416
Drive Pin Punch

142440416
4445-10: RNCC: 3 | RNVC: 9

1 Jan 1968

5120-14-548-0822
Socket Wrench

145480822
5010505224: RNCC: 3 | RNVC: 2

9 Dec 2005

5120-14-392-7642
Socket Wrench

143927642
165335: RNCC: 3 | RNVC: 2

7 Apr 1984

5120-14-512-2810
Mechanical Puller

145122810
92-650-750: RNCC: 3 | RNVC: 9

9 Feb 1999

5120-14-364-9198
Driftpin

143649198
3210-94-57-003: RNCC: 3 | RNVC: 2
85-691-1870: RNCC: 6 | RNVC: 9

2 Sep 1980

5120-14-438-2505
Drive Pin Punch

144382505
BN311-545M25REP6.0: RNCC: 3 | RNVC: 2

10 Feb 1999

5120-14-406-9508
Drift Pin Set

144069508
853-202-091-0: RNCC: 3 | RNVC: 2

22 Jan 1986

5120-14-304-1827
Hand Hammer

143041827
202 100-200G: RNCC: 3 | RNVC: 9
AMPC0H0: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-250-8307
Box Wrench

142508307
62-27X30: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-032-1694
Box Wrench

140321694
C1000.19: RNCC: 3 | RNVC: 2
6630-00-19: RNCC: 3 | RNVC: 2
6630-00-19: RNCC: 5 | RNVC: 9

8 Dec 1981

5120-14-441-2338
Socket Wrench

144412338
6809V32-2428-00: RNCC: 3 | RNVC: 2

22 Aug 1990

5120-14-261-5133
Mechanical Puller

142615133
1E101630EXTRACTEUR: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-432-7070
Seal Inserter

144327070
OUT11817-1: RNCC: 3 | RNVC: 2
0UT11817-1: RNCC: 5 | RNVC: 2

21 Jun 1989

5120-14-452-6574
Mechanical Puller

144526574
F46507: RNCC: 3 | RNVC: 2

15 Jan 1992

5120-14-524-2845
Mechanical Puller

145242845
752903: RNCC: 3 | RNVC: 2
SYB2036: RNCC: 5 | RNVC: 2

9 Mar 2001

5120-14-524-0583
Seal Inserter

145240583
CAS2381: RNCC: 3 | RNVC: 2

22 Feb 2001

5120-14-490-4035
Box Wrench

144904035
5000604287: RNCC: 3 | RNVC: 2
5000604287: RNCC: 5 | RNVC: 9
5120AA2025801: RNCC: 6 | RNVC: 9
F300 0T 007 6473: RNCC: 6 | RNVC: 9

24 Sep 1997

5120-14-390-3200
Socket Wrench

143903200
01-90900-030: RNCC: 3 | RNVC: 2
01-90-900-030: RNCC: 5 | RNVC: 2
85-692-4858: RNCC: 6 | RNVC: 9

26 Jan 1984

5120-14-411-8597
Socket Wrench

144118597
0121445: RNCC: 3 | RNVC: 2
77 TO: RNCC: 5 | RNVC: 2
77T: RNCC: 5 | RNVC: 2
77T0: RNCC: 5 | RNVC: 2
BD16-19-21-22: RNCC: 5 | RNVC: 2

10 Sep 1986

5120-14-208-9785
Socket Wrench

142089785
92.21: RNCC: 3 | RNVC: 2
86-21: RNCC: 3 | RNVC: 2
168-21: RNCC: 3 | RNVC: 9
92-21: RNCC: 5 | RNVC: 2
3272670256316: RNCC: 5 | RNVC: 2
130095: RNCC: 5 | RNVC: 2
3148511280102: RNCC: 5 | RNVC: 2
74349-21: RNCC: 5 | RNVC: 9
0128010: RNCC: 5 | RNVC: 9
DEM168-21: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-425-9524
Aligning Punch

144259524
500425TTH20R2: RNCC: 3 | RNVC: 2

28 Jul 1988

5120-14-363-9541
Seal Inserter

143639541
16380189: RNCC: 3 | RNVC: 2
16380189: RNCC: 5 | RNVC: 9

7 Aug 1980

5120-14-226-7442
Nail Set

142267442
1754-1-5: RNCC: 3 | RNVC: 2
CC1-5: RNCC: 3 | RNVC: 2
4449-1-5: RNCC: 3 | RNVC: 2
1472: RNCC: 5 | RNVC: 2
7175-1-5: RNCC: 5 | RNVC: 2
374-1-5: RNCC: 5 | RNVC: 9
85-679-5590: RNCC: 6 | RNVC: 9

1 Jan 1966

5120-14-322-5421
Box Wrench

143225421
50.55: RNCC: 3 | RNVC: 2
3148511068106: RNCC: 5 | RNVC: 2
50-55: RNCC: 5 | RNVC: 2
0106810: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-468-9403
Hand Vise

144689403
NO PRIMARY REF14-468-9403: RNCC: 3 | RNVC: 2
SST: RNCC: 5 | RNVC: 9

30 Mar 1994

5120-14-438-0933
Seal Inserter

144380933
NO PRIMARY REF14-438-0933: RNCC: 3 | RNVC: 2
391356: RNCC: 5 | RNVC: 9
391356: RNCC: 5 | RNVC: 9

7 Mar 1990

5120-14-427-2426
Mechanical Puller

144272426
46AM011-01: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-326-2742
Aligning Punch

143262742
330A94-2714-12: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-528-6728
Wood Mallet

145286728
0368500201: RNCC: 3 | RNVC: 2
3303800368019: RNCC: 5 | RNVC: 2
SYQ0713: RNCC: 5 | RNVC: 2

5 Feb 2002

5120-14-410-3502
Mechanical Puller

144103502
8811927000: RNCC: 3 | RNVC: 2

18 Jun 1986

5120-14-201-3808
Cant Hook

142013808
NO PRIMARY REF14-201-3808: RNCC: 3 | RNVC: 2
B0I2-3340RT5-329: RNCC: 5 | RNVC: 9

1 Jan 1962

5120-14-479-0300
Aligning Punch

144790300
888-362-600-1: RNCC: 3 | RNVC: 2

6 Dec 1995

5120-14-527-7173
Mechanical Puller

145277173
888-493-800-1: RNCC: 3 | RNVC: 2

14 Nov 2001

5120-14-347-2623
Hand Hammer Head

143472623
E71-012-400: RNCC: 2 | RNVC: 2
400-400: RNCC: 3 | RNVC: 2

19 Jan 1978

5120-14-495-2149
Rack Bar Jack

144952149
NO PRIMARY REF14-495-2149: RNCC: 3 | RNVC: 2
00756655: RNCC: 5 | RNVC: 9
F300 0T 018 6529: RNCC: 6 | RNVC: 9

15 Oct 1997

5120-14-369-7947
Box Wrench

143697947
30AM013-0000017: RNCC: 3 | RNVC: 2

17 Apr 1981

5120-14-527-6470
Seal Inserter

145276470
888-483-100-1: RNCC: 3 | RNVC: 2

7 Nov 2001

5120-14-275-8970
Serving Mallet

142758970
NO PRIMARY REF14-275-8970: RNCC: 3 | RNVC: 2
900-70: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-265-0921
Mechanical Puller

142650921
330A98-2050-00: RNCC: 3 | RNVC: 2
330A98-2050-0000: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-310-8893
Socket Wrench

143108893
94.3,2: RNCC: 3 | RNVC: 2
3148511287002: RNCC: 5 | RNVC: 2
94-3-2: RNCC: 5 | RNVC: 2
0128700: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-395-5722
Hand Bellows

143955722
5-1881B43152-317: RNCC: 3 | RNVC: 2

30 Oct 1984

5120-14-306-3520
Socket Wrench

143063520
80-13P: RNCC: 3 | RNVC: 2
91619658: RNCC: 5 | RNVC: 2
3272670270145: RNCC: 5 | RNVC: 2
80-13CP: RNCC: 5 | RNVC: 9
80-13-P: RNCC: 5 | RNVC: 9
80-13: RNCC: 5 | RNVC: 9
80-13C: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-517-7382
Mechanical Puller

145177382
854-620-020-0: RNCC: 3 | RNVC: 2

5 Jan 2000

5120-14-537-5594
Seal Inserter

145375594
350A93-3325-00: RNCC: 3 | RNVC: 2

3 Nov 2003

5120-14-384-3372
Electronics Pliers

143843372
809733: RNCC: 3 | RNVC: 2
85-801-0486: RNCC: 6 | RNVC: 9

4 May 1983

5120-14-540-8518
Hand Hammer

145408518
0136510801: RNCC: 3 | RNVC: 2
3303800136977: RNCC: 5 | RNVC: 2

23 Apr 2004

5120-14-549-8161
Socket Wrench Set

145498161
R.420P: RNCC: 3 | RNVC: 2
R.420P: RNCC: 5 | RNVC: 2

15 May 2006

5120-14-232-7897
Hand Hammer

142327897
BB36: RNCC: 3 | RNVC: 9

1 Jan 1967

5120-14-474-4215
Hand Hammer

144744215
795A200: RNCC: 3 | RNVC: 2

15 Feb 1995

5120-14-458-8836
Seal Inserter

144588836
M33879: RNCC: 3 | RNVC: 2

5 Nov 1992

5120-14-246-2009
Socket Wrench

142462009
D1010-1153: RNCC: 3 | RNVC: 2
AT5592: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-204-9874
Hand Screw Jack

142049874
E52-072SC25: RNCC: 2 | RNVC: 2

1 Jan 1963

5120-14-479-5251
Mechanical Puller

144795251
2-55766-00: RNCC: 3 | RNVC: 2

17 Jan 1996

5120-14-455-5934
Pipe Wrench

144555934
138.17: RNCC: 3 | RNVC: 2
138-17: RNCC: 5 | RNVC: 2
91720583: RNCC: 5 | RNVC: 2
3148511373750: RNCC: 5 | RNVC: 2
77974557: RNCC: 5 | RNVC: 2
0137375: RNCC: 5 | RNVC: 9

28 May 1992

5120-14-324-4720
Driftpin

143244720
330A93-7700-20: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-352-4405
Pawl

143524405
9970-115-703: RNCC: 3 | RNVC: 2
9970-115-703-0: RNCC: 5 | RNVC: 2
85-689-8255: RNCC: 6 | RNVC: 9

16 Oct 1978

5120-14-321-8103
Driftpin

143218103
3160S95-63-051: RNCC: 3 | RNVC: 2
85-100-3208: RNCC: 6 | RNVC: 9

1 Jan 1975

5120-14-385-3145
Seal Inserter

143853145
360A93-3309-00: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-236-5532
Socket Wrench

142365532
0117110: RNCC: 3 | RNVC: 2
72.9: RNCC: 5 | RNVC: 2
72-9: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-040-7560
Ratchet Screwdriver

140407560
RL130: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-286-6784
Mechanical Puller

142866784
7725031: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-432-7072
Seal Inserter

144327072
OUT11820-1: RNCC: 3 | RNVC: 2
0UT11820-1: RNCC: 5 | RNVC: 2

21 Jun 1989

5120-14-392-1107
Socket Wrench

143921107
356-04-017: RNCC: 3 | RNVC: 2

21 Mar 1984

5120-14-242-0991
Trowel

142420991
E75505-220: RNCC: 2 | RNVC: 2
2695 944 022: RNCC: 5 | RNVC: 2
E75-505-220: RNCC: 5 | RNVC: 2
543A: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-468-2200
Socket Wrench

144682200
NO PRIMARY REF14-468-2200: RNCC: 3 | RNVC: 2
3148510987842: RNCC: 5 | RNVC: 2
37.19: RNCC: 5 | RNVC: 2
0098784: RNCC: 5 | RNVC: 9

14 Feb 1994

5120-14-401-4115
Mechanical Puller

144014115
332A93-3218-00: RNCC: 3 | RNVC: 2

5 Jun 1985

5120-14-522-3811
Mechanical Puller

145223811
TC3069G001: RNCC: 3 | RNVC: 2

25 Oct 2000

5120-14-519-3831
Plier Wrench

145193831
514A.65: RNCC: 3 | RNVC: 2
574-65: RNCC: 5 | RNVC: 2
0714 09 17: RNCC: 5 | RNVC: 2

15 Mar 2000

5120-14-203-1388
Pipe Vise

142031388
790-2: RNCC: 3 | RNVC: 2

1 Jan 1963

5120-14-434-6037
Hand Hammer

144346037
0200220301: RNCC: 3 | RNVC: 2
200-22EC: RNCC: 3 | RNVC: 2
M0B200-22: RNCC: 3 | RNVC: 2

26 Sep 1989

5120-14-218-0075
Hand Hammer

142180075
101-1500EC: RNCC: 3 | RNVC: 2
M0B101-1500EC: RNCC: 5 | RNVC: 2
M0B101-1750EC: RNCC: 5 | RNVC: 2
119-1750EMMANCHE: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-369-3305
Driftpin

143693305
365A91-2345-13: RNCC: 3 | RNVC: 2

17 Apr 1981

5120-14-455-0077
Rivet Bucking Bar

144550077
853-600-361-0: RNCC: 3 | RNVC: 2

1 May 1992

5120-14-384-9225
Socket Wrench

143849225
9970-121-272: RNCC: 3 | RNVC: 2

2 Jun 1983

5120-14-433-3229
Aligning Punch

144333229
853-202-856-0: RNCC: 3 | RNVC: 2

19 Jul 1989

5120-14-487-5833
Open End Box Wrench

144875833
853-100-297-0: RNCC: 3 | RNVC: 2

10 Apr 1997

5120-14-273-6952
Hand Hammer Head

142736952
E71-014-500: RNCC: 2 | RNVC: 2
1-32: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-333-5992
Jaw Cable Grip

143335992
J05791-02-1130P031: RNCC: 3 | RNVC: 2
MM7213-3D8: RNCC: 5 | RNVC: 2

2 Jul 1975

5120-14-283-6537
Hand Hydraulic Jack

142836537
4867-30: RNCC: 3 | RNVC: 9

1 Jan 1972

5120-14-438-6879
Drain Plug Wrench

144386879
321A97-0091-00: RNCC: 3 | RNVC: 2

28 Mar 1990

5120-14-286-7025
Pipe Wrench

142867025
138: RNCC: 3 | RNVC: 2
100661: RNCC: 5 | RNVC: 2
FACOM138: RNCC: 5 | RNVC: 2
91353330: RNCC: 5 | RNVC: 2
100175-9000-144: RNCC: 5 | RNVC: 2
100175-9000-144: RNCC: 5 | RNVC: 2
138: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-437-4047
Aligning Punch

144374047
NO PRIMARY REF14-437-4047: RNCC: 3 | RNVC: 2
758-010-15: RNCC: 5 | RNVC: 9

31 Jan 1990

5120-14-551-9692
Mechanical Puller

145519692
4537408-254: RNCC: 3 | RNVC: 2

14 Nov 2006

5120-14-316-4997
Mechanical Puller

143164997
0U50126: RNCC: 3 | RNVC: 2
50126: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-359-0455
Socket Wrench

143590455
75.13/16: RNCC: 3 | RNVC: 2
3148511203804: RNCC: 5 | RNVC: 2
75 13-16: RNCC: 5 | RNVC: 2
75-13-16: RNCC: 5 | RNVC: 2
0120380: RNCC: 5 | RNVC: 9

7 Sep 1979

5120-14-250-5925
Socket Wrench

142505925
MZ7-104: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-330-1941
Box Wrench

143301941
111-13X14: RNCC: 3 | RNVC: 2
DEM111-13X14: RNCC: 5 | RNVC: 2

2 Jul 1975

5120-14-441-2220
Mechanical Puller

144412220
6801V32-3130-20: RNCC: 3 | RNVC: 2

22 Aug 1990

5120-14-340-7600
Hand Hammer Head

143407600
102-1000: RNCC: 3 | RNVC: 2

14 Feb 1977

5120-14-323-4423
Driftpin

143234423
ML0150120: RNCC: 3 | RNVC: 2
ML015-01-20: RNCC: 5 | RNVC: 2
ML0150120: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-509-2740
Box Wrench

145092740
MS38-10: RNCC: 3 | RNVC: 2
MS38 10MM: RNCC: 5 | RNVC: 2
ASC1360644: RNCC: 5 | RNVC: 9

21 Oct 1998

5120-14-279-5892
Ratchet Wrench

142795892
13-62A62TER26: RNCC: 2 | RNVC: 2
2786-26: RNCC: 3 | RNVC: 2
323-10DR0ITEETGAUCHE26: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-244-9027
Socket Wrench

142449027
92.29: RNCC: 3 | RNVC: 2
86-29: RNCC: 3 | RNVC: 2
168-29: RNCC: 3 | RNVC: 9
3272670279254: RNCC: 5 | RNVC: 2
3148511280904: RNCC: 5 | RNVC: 2
92-29: RNCC: 5 | RNVC: 2
0128090: RNCC: 5 | RNVC: 9
DEM168-29: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-249-9414
Box Wrench

142499414
62-14X15: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-257-8051
Socket Wrench

142578051
72.13: RNCC: 3 | RNVC: 2
8810120031: RNCC: 5 | RNVC: 2
479948H: RNCC: 5 | RNVC: 2
0110822S00: RNCC: 5 | RNVC: 2
4033: RNCC: 5 | RNVC: 2
91352512: RNCC: 5 | RNVC: 2
0117150: RNCC: 5 | RNVC: 2
0566357: RNCC: 5 | RNVC: 2
3148511171509: RNCC: 5 | RNVC: 2
72-13: RNCC: 5 | RNVC: 2

1 Jan 1969

5120-14-202-2024
Hand Hammer

142022024
NO PRIMARY REF14-202-2024: RNCC: 3 | RNVC: 2
14555M300: RNCC: 5 | RNVC: 9

1 Jan 1963

5120-14-319-4288
Mechanical Puller

143194288
71888: RNCC: 3 | RNVC: 2
71888-0: RNCC: 5 | RNVC: 2
P71888: RNCC: 5 | RNVC: 2
85-686-0714: RNCC: 6 | RNVC: 9

1 Jan 1975

5120-14-388-2330
Socket Wrench

143882330
VTR501-2-1145: RNCC: 3 | RNVC: 2

12 Oct 1983

5120-14-449-8323
Hand Hammer

144498323
993-04-02-09: RNCC: 3 | RNVC: 2

11 Sep 1991

5120-14-212-2434
Socket Wrench

142122434
91-21MM: RNCC: 3 | RNVC: 2

1 Jan 1964

5120-14-204-8220
Hammer Handle

142048220
B54-521-1000-34X48: RNCC: 2 | RNVC: 2

1 Jan 1963

5120-14-327-4916
Box Wrench

143274916
50.115: RNCC: 3 | RNVC: 2
108-115: RNCC: 3 | RNVC: 2
3148511074107: RNCC: 5 | RNVC: 2
50-115: RNCC: 5 | RNVC: 2
3272670296367: RNCC: 5 | RNVC: 2
0107410: RNCC: 5 | RNVC: 9

2 Jul 1975

5120-14-378-2904
Hand Hammer

143782904
405-35EMMANCHE: RNCC: 3 | RNVC: 2
SYB0338: RNCC: 5 | RNVC: 2

20 Jul 1982

5120-14-387-1919
Mechanical Puller

143871919
MGB233-49: RNCC: 3 | RNVC: 2
MGB233-49: RNCC: 5 | RNVC: 2

24 Aug 1983

5120-14-271-8389
Box Wrench

142718389
108-90: RNCC: 3 | RNVC: 2
3272670212800: RNCC: 5 | RNVC: 2
3729-90: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-385-3125
Mechanical Puller

143853125
360A93-3230-00: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-427-1511
Seal Inserter

144271511
6814-58531: RNCC: 3 | RNVC: 2

6 Oct 1988

Load More Results