What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.

A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Blacksmith's Punch?

A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Mechanical Finger?

A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.

A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Screwdriver And Wrench Assembly?

A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Stakeholder Bench Plate?

A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.

What is a Drill Drift?

A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.

A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Digging Bar?

A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

What is a Valve Spring Lifter?

A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.

What is a Fuse Puller?

A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.

Hand Tools, Nonedged, Nonpowered - France (FR)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by France (FR) - NCB is 14

Page 15 of 110

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by France

51	20	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - France (FR)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 16 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Pipe Vise? 19 Items: A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.
What is a Hand Vise? 25 Items: A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.
What is a Hand Hydraulic Jack? 133 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 153 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 903 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 17 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
Swage,Bottom,Blacksmith's 10 Items
What is a Hand Tube Flaring Tool? 23 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Blacksmith's Punch? 12 Items: A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.
What is a Drain Plug Wrench? 45 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 57 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 16 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 3829 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
Flatter,Blacksmith's 18 Items
Swage,Top,Blacksmith's 12 Items
What is a Pipe Wrench? 110 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 149 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 53 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
Screwdriver,Offset 54 Items
What is a Screwdriver Bit? 707 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Mechanical Finger? 25 Items: A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.
What is a Socket Wrench Socket? 1803 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 1412 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 1641 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 52 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 565 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
Jack,Push-Pull,Screw 30 Items
What is a Hand Tube Bender? 54 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 1106 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 55 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pinch Bar? 19 Items: A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.
What is a Pry Bar? 17 Items: A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.
What is a Wrecking Bar? 15 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 273 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 413 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 32 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 295 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
Face,Hammer,Inserted 25 Items
What is a Hole Sheet Metal Holder? 37 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Screwdriver And Wrench Assembly? 11 Items: A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.
What is a Hand Rivet Set? 121 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Stakeholder Bench Plate? 22 Items: A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.
What is a Drill Drift? 32 Items: A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.
What is a Tack Claw? 15 Items: A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.
Mattock 28 Items
What is a Socket Wrench Handle Bar? 108 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Stake,Sheet Metalworking 50 Items
Riveter,Blind,Hand 76 Items
What is a Hand Shovel? 43 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 98 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 30 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
What is a Digging Bar? 20 Items: A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.
Block,Dolly,Sheet Metalworking 56 Items
What is a Piston Ring Compressor? 34 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Valve Spring Lifter? 29 Items: A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.
What is a Fuse Puller? 20 Items: A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.
What is a Hand Lead Seal Press? 18 Items: A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.
What is a Hand Beading Tool? 91 Items: A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.
What is a Hand Hammer? 502 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
Head,Hand Hammer 81 Items
What is a Lamp Extractor? 76 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Tube Packing Ring Installing Tool? 29 Items: A Tube Packing Ring Installing Tool (INSTALLING TOOL,TUBE PACKING RING) is an item designed to insert packing rings on tubes within tube sheets on condensers and similar heat exchangers. In operation, the packing rings are assembled on the loading pin mandrel and are then transferred from the mandrel on to the tube by means of a tubular sleeve which slides on the mandrel.
What is a Carpenters' Pincers? 18 Items: A Carpenters' Pincers (PINCERS,CARPENTERS') is a plierlike hand tool having two opposing jaws which may have hammerlike backs. One handle has a nail or tack pulling claw, the other is shaped to form a screwdriver. The tool may contain a wire cutter. See also NIPPERS, END CUTTING and PINCERS, FARRIERS'.
What is a Trowel? 33 Items: A Trowel is a tool used for bricklaying, concrete work, plastering, linoleum laying, and masonry work. Excludes CORNER TOOL, CONCRETE.
What is a Hand Abrasive Wheel Dresser? 12 Items: A Hand Abrasive Wheel Dresser (DRESSER,ABRASIVE WHEEL,HAND) is a tool designed to remove glaze from, dress, shape, sharpen, and true solid abrasive wheels. Excludes NIB, DIAMOND, WHEEL DRESSING.
What is a Lamp Cap Extractor? 32 Items: A Lamp Cap Extractor (EXTRACTOR,LAMP CAP) is a tool specifically designed to facilitate the removal of lamp caps from switchboards, panels or indicator lamps.
What is a Rivet Bucking Bar? 51 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 86 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 277 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Woven Cable Grip? 23 Items: A Woven Cable Grip (GRIP,CABLE,WOVEN) is a braided wire device designed to clutch a bare or insulated conductor, cable or wire rope, for holding taut or drawing through conduit.
What is a Screw Thread Insert Extractor? 19 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is an Electron Tube Extractor? 18 Items: An Electron Tube Extractor (EXTRACTOR,ELECTRON TUBE) is a hand tool designed to facilitate the removal of electron tubes from electronic equipment and to avoid burning the fingers. It may be used for installing tubes.
What is a Cross Tip Screwdriver? 362 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 21 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 11 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 37 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Tool Handle Wedge? 10 Items: A Tool Handle Wedge (WEDGE,TOOL HANDLE) is excludes WEDGE, WOOD.
What is a Marlinespike? 16 Items: A Marlinespike is a metal hand tool made in the shape of a tapered pin. One end is pointed and the opposite end may be headed. The body may contain an eye for a lanyard sling, or be grooved lengthwise. Excludes CABLE PICK and FID.
What is an Aligning Punch? 272 Items: An Aligning Punch (PUNCH,ALIGNING) is a round, square, hexagonal or octagonal bodied hand tool, having a round tapered section 6-1/2 inches (165.1 mm) or more in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, DRIFT and DRIFTPIN.
What is a Drift Punch? 25 Items: A Drift Punch (PUNCH,DRIFT) is a round, square, hexagonal, or octagonal bodied hand tool, having a round tapered section 4 to 6 inches (101.6 mm to 152.4 mm) inclusive in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, ALIGNING; and DRIFTPIN.
What is a Putty Knife? 36 Items: A Putty Knife (KNIFE,PUTTY) is a hand tool with a nonedged blade fixed to a handle for laying on and smoothing putty and the like.
What is a Socket Wrench Adapter-Extension? 40 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 30 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 184 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Socket Wrench Ratchet Attachment? 47 Items: A Socket Wrench Ratchet Attachment (RATCHET ATTACHMENT,SOCKET WRENCH) is a connection for socket wrenches and handles. Consists of a ratcheting mechanism with an internal drive on one end and an external drive on the opposite end of the same size. The item is designed to permit continuous rotation of the socket in one direction without removing the socket or handle and without a complete rotation of the handle.
What is a Wrench Extension Handle? 81 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Socket Wrench Crowfoot Attachment? 155 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 33 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 43 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 48 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 2394 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 372 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 300 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 661 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 32 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand-Operated Grommet And Eyelet Press? 12 Items: A Hand-Operated Grommet And Eyelet Press (PRESS,GROMMET AND EYELET,HAND-OPERATED) is a device which punches or pierces holes and in addition fastens or sets eyelets and grommets in cloth, paper and similar material. May be used for fastening or setting rivets, lacing hooks and snaps in cloth, paper and similar material. It is hand operated by lever or screw action. See also PUNCH, EYELET, PLIER TYPE and PRESS, GROMMET AND EYELET, FOOT OPERATED.
What is a Claw Bar? 19 Items: A Claw Bar (BAR,CLAW) is before using, refer to Reference Drawing Group AG.
What is a Shock Type Wheel Stud Nut Wrench? 11 Items: A Shock Type Wheel Stud Nut Wrench (WRENCH,WHEEL STUD NUT,SHOCK TYPE) is a manually operated item designed to remove wheel stud nuts. In operation the inner nut is turned by a socket attached to a shaft on which is a loose swinging weighted handle. The weighted handle may be swung quickly to provide an impact force against the socket to loosen the seized or jammed nuts. The outer nut is held stationary by a separate hexagonal holding wrench.
What is a Drift Pin Set? 30 Items: A Drift Pin Set is a group of DRIFTPIN having different characteristics.
What is a Tire Iron? 25 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 115 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Blacksmith's Vise? 14 Items: A Blacksmith's Vise (VISE,BLACKSMITH'S) is a clamping device consisting of a mounting plate, one stationary and one manual screw actuated jaw and a supporting member extending downward from the stationary jaw to the floor. Designed to be mounted on a bench, table or the like. May include pipe holding jaws.
What is a Machinist's Vise? 64 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Clamp Base Bench Vise? 10 Items: A Clamp Base Bench Vise (VISE,BENCH,CLAMP BASE) is a clamping device consisting of a base, one stationary and one manual screw actuated jaw, and one or more guide bars or rods. Designed with an integral clamp for attaching to a bench, table, or the like. Does not include pipe holding jaws.
What is a Fixed Open End Wrench Set? 86 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Nail Set? 11 Items: A Nail Set is a round knurled, square, hexagonal or octagonal bodied hand tool having a round tapered section terminating in a cupped point. It is designed to set brad head nails below the surface by striking it a hammerlike blow. See also PUNCH, DRIVE PIN.
What is a Socket Wrench Set? 202 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is an Open End Box Wrench Set? 10 Items: An Open End Box Wrench Set (WRENCH SET,OPEN END BOX) is a group of WRENCH, OPEN END BOX having different characteristics.
What is a Combination Box And Open End Wrench Set? 72 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Box Wrench Set? 36 Items: A Box Wrench Set (WRENCH SET,BOX) is a group of box wrenches having different characteristics. It may include a HANDLE, EXTENSION WRENCH. See also WRENCH SET, COMBINATION, BOX AND OPEN END.
What is a Hot Line Stick? 26 Items: A Hot Line Stick is a hand tool consisting of a straight, round stick (pole) made of a suitable nonconductive material with a tool fixed to one end. The other end may be plain or have a butt mounting device fixed to it. Various types of attachments (hooks, rings, and bands) may be fixed to the body. It is designed for use in the repair and maintenance of live high voltage aerial lines. Excludes hot line sticks without heads.
Handle,Mattock-Pick 15 Items
What is a Wrench Kit? 73 Items: A Wrench Kit is an assortment of various types and sizes of wrenches such as SOCKET, SOCKET WRENCH; WRENCH, OPEN END, FIXED; WRENCH, BOX and the like. It may include adapter(s), ratchet(s) and the like. See also WRENCH SET (as modified.
What is a Brad Awl? 15 Items: A Brad Awl (AWL,BRAD) is a small, pointed tool used by shoemakers, saddlers, cabinetmakers, and the like for piercing small holes in wood, leather, and similar materials, and consists of a handle with a ferrule and a blade. The blade is round, terminating in a beveled, sharp straight edge and has a shank which passes through the center of the handle.
What is a Scratch Awl? 20 Items: A Scratch Awl (AWL,SCRATCH) is an item whose nominal length of blade is less than 4 inches (101.6 millimeters) and is provided with a nondetachable handle.
What is a Screw Extractor Set? 10 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 102 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
Jack,Scissors,Hand 26 Items
What is a Piston Ring Expander? 23 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
Mallet,Plastic 62 Items
Mallet,Rubber 10 Items
What is a Wood Mallet? 37 Items: A Wood Mallet (MALLET,WOOD) is excludes MALLET, CALKING; MALLET, HAWSING and MALLET, SERVING.
What is a Rack Bar Jack? 30 Items: A Rack Bar Jack (JACK,RACK BAR) is excludes JACK, BUMPER and JACK, REEL, HAND.
What is a Pneumatic Tire Valve Core Inserter And Remover? 14 Items: A Pneumatic Tire Valve Core Inserter And Remover (INSERTER AND REMOVER,PNEUMATIC TIRE VALVE CORE) is a bar of steel having a small cylindrical slotted end for removing or installing a valve core in a valve stem by a screwing motion. See also REPAIR TOOL, PNEUMATIC TIRE VALVE.
What is a Hand Tube Swaging Tool Kit? 20 Items: A Hand Tube Swaging Tool Kit (SWAGING TOOL KIT,TUBE,HAND) is a hand-operated noncutting tool consisting of one or more PUNCH, TUBE SWAGING, HAND and a tube flaring bar.
What is a Hand Tube Flaring Punch? 11 Items: A Hand Tube Flaring Punch (PUNCH,TUBE FLARING,HAND) is a noncutting tool having a shaped end or section designed to flare the ends of tubes. One type is designed to flare the ends of tubes against a tube sheet, and another to flare tube ends to mate with tube fittings. Includes punch components of FLARING TOOL, TUBE, HAND.
What is a Hose Strap Band Clamping Tool? 26 Items: A Hose Strap Band Clamping Tool (CLAMPING TOOL,STRAP BAND,HOSE) is an item designed to tension and lock metal straps around a rubber hose, and the like. It is also used to clamp and hold fittings therein.
What is a Mechanical Puller? 3073 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 470 Items
What is a Slip Joint Pliers? 84 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Brake Repair Pliers? 14 Items: A Brake Repair Pliers (PLIERS,BRAKE REPAIR) is a tool having jaws designed for use in brake repair operations, such as removing and replacing items such as keys, springs, and the like. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 226 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 12 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 81 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 56 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 15 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 11 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 29 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Cross Tip Screwdriver Set? 14 Items: A Cross Tip Screwdriver Set (SCREWDRIVER SET,CROSS TIP) is a group of SCREWDRIVER, CROSS TIP having different characteristics.
What is a Spanner Wrench Set? 18 Items: A Spanner Wrench Set (WRENCH SET,SPANNER) is a group of items under WRENCH, SPANNER having different characteristics.
What is a Drive Pin Punch Set? 31 Items: A Drive Pin Punch Set (PUNCH SET,DRIVE PIN) is a group of PUNCH, DRIVE PIN having different characteristics.
What is an Aligning Punch Set? 13 Items: An Aligning Punch Set (PUNCH SET,ALIGNING) is a group of PUNCH, ALIGNING having different characteristics. See also DRIFTPIN SET.
What is a Slugging Type Box Wrench Socket? 16 Items: A Slugging Type Box Wrench Socket (SOCKET,SLUGGING TYPE BOX WRENCH) is an item having a hexagonal external drive at one end, made to fit into the internal hexagonal or 12-point opening of a slugging type box wrench. The opposite end has a single-broached hexagonal opening of the same size as the external drive. The item is designed with extra thick walls to withstand the impact of sledge blows on the driving wrench.
What is a Mechanical Puller Step Plate? 44 Items: A Mechanical Puller Step Plate (STEP PLATE,MECHANICAL PULLER) is a circular disk, flanged to provide a shoulder, and designed to provide a base for the screw point of a PULLER, MECHANICAL when pulling externally mounted bearings, gears, and the like from hollow shafts or housings. It has a concentric, countersunk hole to accommodate the puller screw point.
What is a Solid Center Punch? 79 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Cable Type Ratchet Lever Puller? 20 Items: A Cable Type Ratchet Lever Puller (PULLER,RATCHET LEVER,CABLE TYPE) is an item consisting of a metal frame and ratchet lever reel to which is attached one end of a flexible cable (wire rope). The cable feeds through the fast eye in the metal frame, and may be reeved through a slip hook tackle hook. See also BINDER, LOAD; HOIST, WIRE ROPE and STRETCHER, WIRE.
What is an Electronic Equipment Tuning Wand? 18 Items: An Electronic Equipment Tuning Wand (TUNING WAND,ELECTRONIC EQUIPMENT) is a hand-held rod used in determining the adjustment of the windings of a radio frequency coil. It is made of insulating material with iron on one end and brass on the other end. By inserting the iron end in the coil, the inductance is increased and by inserting the brass end, the inductance is decreased.
What is a Combination Open End And Spanner Wrench? 14 Items: A Combination Open End And Spanner Wrench (WRENCH,OPEN END AND SPANNER,COMBINATION) is a tool having open end wrench characteristics at one end and spanner wrench features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s) at the other end.
What is a Detent Handling Tool? 187 Items: A Detent Handling Tool (HANDLING TOOL,DETENT) is a specially designed handling tool consisting of a rigid bar with a T-handle on one end. The other end is equipped with threads designed to mate the threads of a detent to facilitate inserting or extracting.
What is a Hand Material Handling Hook? 23 Items: A Hand Material Handling Hook (HOOK,MATERIAL HANDLING,HAND) is a hook whose curved end conforms to Style AP1, AP2, AP3 or AP4 of Reference Drawing Group AP. Excludes HOOK, MANHOLE COVER, HAND; HOOK, WIRE BREAKING, HAND; HOOK, ROCK CRUSHER FEEDING, HAND; HOOK, STRAINER REMOVING, HAND and HOOKS, BAG HANDLING, HAND.
What is a Magnetic Retrieving Tool? 11 Items: A Magnetic Retrieving Tool (RETRIEVING TOOL,MAGNETIC) is a hand-operated magnetic device used to locate and pick up metallic articles, such as bolts, nuts, pins, washers, and the like, in confined spaces. It may be rigid, flexible or adjustable. Excludes FINGER, MECHANICAL.
What is a Mechanical Puller Adapter? 78 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Combination Box And Open End Box Wrench? 13 Items: A Combination Box And Open End Box Wrench (WRENCH,BOX AND OPEN END BOX,COMBINATION) is a double end wrench, box and open end box, primarily designed for removing or replacing tube fittings. The opening in the open end box may be machined at an angle from the longitudinal center line of the wrench.
What is a Screw Thread Insert Inserter? 136 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Flat Tip Screwdriver Set? 48 Items: A Flat Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP) is a group of SCREWDRIVER, FLAT TIP having different characteristics.
What is a Terminal Crimping Tool Contact Positioner? 89 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 16 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is an Adjustable Wrench? 138 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 239 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 75 Items
Handle,Shovel 10 Items
What is a Socket Wrench Spanner Attachment? 88 Items: A Socket Wrench Spanner Attachment (SPANNER ATTACHMENT,SOCKET WRENCH) is an item having an adjustable or fixed span with pin, hook, or key type end that is used to fit and turn various size retaining rings, cover plates, plugs, couplings, and like parts. Usually designed to be driven by a male driver.
What is a Retaining Ring Installation Tool? 44 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Tacker? 16 Items: A Tacker is a hand-operated, hammerlike or gunlike item without a clincher, used to drive preformed connecting elements like pins, nails or staples through one object or piece of material into another. Excludes STAPLER (as modified).
What is a Bearing And Bushing Inserter? 290 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 207 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 939 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 14 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 93 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 161 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 94 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 141 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 53 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Six Point Tip Screwdriver? 155 Items: A Six Point Tip Screwdriver (SCREWDRIVER,SIX POINT TIP) is a manual screwdriver having a single nonremoveable blade having a tip with six rounded points.
What is a Seal Inserter And Remover? 147 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 478 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is a Preformed Packing Inserter And Remover? 34 Items: A Preformed Packing Inserter And Remover (INSERTER AND REMOVER,PREFORMED PACKING) is a hand tool designed to install and remove a PACKING, PREFORMED.
What is a Pin Remover? 34 Items: A Pin Remover (REMOVER,PIN) is a hand tool designed to facilitate the removal of a pin from a hole.
What is a Pin Inserter And Remover? 13 Items: A Pin Inserter And Remover (INSERTER AND REMOVER,PIN) is a rodlike tool designed to facilitate the insertion and removal of a pin from a hole.
What is an Electrical Contact Inserter And Remover? 37 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Piston Inserter? 40 Items: A Piston Inserter (INSERTER,PISTON) is a tool designed to permit installation of a piston or piston assembly without damaging the packings or piston.
What is a Spring Inserter And Remover? 85 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 13 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Stud Inserter? 22 Items: A Stud Inserter (INSERTER,STUD) is a device designed to drive in studs. It does not have any facilities for removing or extracting studs. See also INSERTER AND REMOVER, STUD.
What is a Stud Inserter And Remover? 17 Items: A Stud Inserter And Remover (INSERTER AND REMOVER,STUD) is a group of items designed to extract and to drive studs. It may include collets, guides, housings, holders and the like. See also REMOVER SET, STUD and INSERTER, STUD.
What is a Gear Inserter? 54 Items: A Gear Inserter (INSERTER,GEAR) is a hand tool designed to install various gears onto a gearshaft. It may be operated by a pushing or a striking force.
What is a Crimping Tool Die? 73 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is an Electrical Connector Inserter? 45 Items: An Electrical Connector Inserter (INSERTER,ELECTRICAL CONNECTOR) is a hand tool designed to hold an electrical connector, and to assist in the positioning and installation of the connector on a cover, panel or the like.
What is a Float? 12 Items: A Float is a tool used for concrete, plastering and grouting work.
What is a Mechanical Puller Set? 19 Items: A Mechanical Puller Set (PULLER SET,MECHANICAL) is two or more separate PULLER, MECHANICAL of different fixed sizes.
What is a Lifting Pneumatic Bag? 11 Items: A Lifting Pneumatic Bag (PNEUMATIC BAG,LIFTING) is a device made of flexible material designed to lift another item by being placed under the item and being inflated with air or some other gas. It will have a means of being connected to an air or gas source and may include a connector hose, a control valve and/or a pressure regulator.
What is a Cable Tie Installation Tool? 22 Items: A Cable Tie Installation Tool (INSTALLATION TOOL,CABLE TIE) is a lightweight, hand-held, hand-operated tool designed to fasten cable ties, straps and the like. Cable tie is inserted into the nose of the tool flush to the cable tie head. Trigger handle tightens cable tie and cuts off any excess. These installation tools are available in a variety of sizes depending on their intended use with miniature, intermediate, standard, heavy or extra heavy cross section ties.
What is a Bearing Staking Installation Tool? 159 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
Wrench Set,Ratchet 15 Items
What is a Sealant Dispenser? 26 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Retaining Ring Pliers Set? 10 Items: A Retaining Ring Pliers Set (PLIERS SET,RETAINING RING) is a group of PLIERS, RETAINING RING having different characteristics.
What is a Hand Armament Subsystem Carrier? 52 Items: A Hand Armament Subsystem Carrier (CARRIER,ARMAMENT SUBSYSTEM,HAND) is a metallic item with a clamp device and/or space for depositing articles. It is used for transporting weapon parts during maintanence and/or repair work, such as gun barrel, automatic loader, breechblock and the like.
What is a Ring Retaining Pliers Tip Set? 13 Items: A Ring Retaining Pliers Tip Set (TIP SET,PLIERS,RING RETAINING) is a collection of removable metallic tips in matched pairs used to provide various size capablities to PLIERS, RING RETAINING which permits the removal and installation of internal and external retaining rings.
What is a Plug Electrical Connector Extractor? 45 Items: A Plug Electrical Connector Extractor (EXTRACTOR,ELECTRICAL CONNECTOR,PLUG) is a hand tool designed to disassemble CONNECTOR, PLUG, ELECTRICAL from a CONNECTOR, RECEPTACLE, ELECTRICAL.
What is a Torque Wrench Adapter Set? 10 Items: A Torque Wrench Adapter Set (ADAPTER SET,TORQUE WRENCH) is tWO or more ADAPTER, TORQUE WRENCH of different sizes.
What is an Electronic Component Inserter And Remover? 79 Items: An Electronic Component Inserter And Remover (INSERTER AND REMOVER,ELECTRONIC COMPONENT) is an item which can insert or remove an electronic component package such as MICROCIRCUIT; RESISTOR, NETWORK (as modified); and the like from its mounting position or socket. Excludes INSERTER AND REMOVER, ELECTRICAL CONTACT; REMOVER, ELECTRICAL CONTACT; EXTRACTOR, ELECTRICAL CARD; EXTRACTOR, ELECTRONIC CRYSTAL UNIT; EXTRACTOR, ELECTRON TUBE.
What is an Impact Type Bit Set And Handle Screwdriver? 14 Items: An Impact Type Bit Set And Handle Screwdriver (SCREWDRIVER,BIT SET AND HANDLE,IMPACT TYPE) is an item consisting of a set of screwdriver bits and a impact driver to accommodate the bits of various types and characteristics. It is designed to transmit a strong rotating movement by the impact of a hammer blowed on the impact driver. It is used to loosen rusted or seized screws. Excludes SCREWDRIVER, BIT SET AND HANDLE.
What is a Hand Vise Jaw? 19 Items: A Hand Vise Jaw (JAW,VISE,HAND) is an item consisting of two opposing parts of a VISE, HAND. The item is moveable and able to open and close. It can hold, grasp or clamp work.
What is a Screwdriver Handle? 28 Items: A Screwdriver Handle (HANDLE,SCREWDRIVER) is an item used to accommodate various types of BIT, SCREWDRIVER. It is designed to rotate a bit that is used for installing or removing screws.
What is a Wire Twister Pliers? 25 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 284 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is a Mechanical Puller Body? 45 Items: A Mechanical Puller Body (BODY,PULLER,MECHANICAL) is an item designed to support and enclose the internal parts of a PULLER,MECHANICAL.
What is a Flat Tip And Cross Tip Screwdriver Set? 39 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is a Socket Wrench Screwdriver Attachment Set? 22 Items: A Socket Wrench Screwdriver Attachment Set (SCREWDRIVER ATTACHMENT SET,SOCKET WRENCH) is a set of screwdriver attachment, socket wrench of different sizes. Items consist of a female square drive on one end to attach to a handle, socket wrench and various screwdriver tip configurations on the opposite end. Excludes SCREWDRIVER ATTACHMENT,SOCKET WRENCH
What is an Oil Filter Wrench? 44 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 430 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Communications Equipment Spring Adjuster? 13 Items: A Communications Equipment Spring Adjuster (ADJUSTER,SPRING,COMMUNICATIONS EQUIPMENT) is a single or double end tool, equipped with slot(s) of various dimensions or with cylindrical rod(s), used for adjusting the springs or spring tensioned parts of electronic equipment.
What is a Rotating Members Aligning Tool? 32 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
What is a Final Drive Assembly Alignment Pin? 41 Items: A Final Drive Assembly Alignment Pin (ALIGNMENT PIN,FINAL DRIVE ASSEMBLY) is a special designed pin used in the assembling of the final drive.
Arm,Handling Tool 77 Items
What is a Splicing Sleeve Compressing Tool? 23 Items: A Splicing Sleeve Compressing Tool (COMPRESSING TOOL,SPLICING SLEEVE) is a hand tool having hinged leverage handles similar to a CUTTER, BOLT or pliers, designed to compress a splicing sleeve when joining the ends of two conductors, or when forming an eye splice in the end of a wire rope. Excludes CRIMPING TOOL, TERMINAL, HAND.
What is a Hand Screw Jack Extension? 14 Items: A Hand Screw Jack Extension (EXTENSION,HAND SCREW JACK) is a length of externally threaded rigid shafting which is the adjustable section of a JACK, SCREW, HAND.
What is a Mechanical Puller Gear Adapter? 21 Items: A Mechanical Puller Gear Adapter (GEAR ADAPTER,PULLER,MECHANICAL) is an adapter that adapts a PULLER,MECHANICAL, to pull a certain gear.
Handle,Hydraulic Jack 18 Items
What is a Female Electrical Contact Resizing Tool? 11 Items: A Female Electrical Contact Resizing Tool (RESIZING TOOL,FEMALE ELECTRICAL CONTACT) is a tool designed to shape to a specific size, female contacts such as those used on electrical connectors, tube sockets, crystal sockets, and pin jacks.
What is a Screwdriver And Socket Wrench Combination? 13 Items: A Screwdriver And Socket Wrench Combination is a hand-tool formed into an integral unit with a socket wrench at one end and a screwdriver bit at the other end. See also SCREWDRIVER AND WRENCH ASSEMBLY.
What is a Hand Hose Fitting Swaging Tool Kit? 11 Items: A Hand Hose Fitting Swaging Tool Kit (SWAGING TOOL KIT,HOSE FITTING,HAND) is a device, hydraulically actuated by hand or power operated pump, consisting of face plate, adapter plate, finger cages, fingers, ram, bushing, and expanding mandrels combined on a single base in various functional arrangements. It is used for swaging the outside diameter of hose assembly fittings, expanding the inside diameter of hose assemblies, and securing the fabrication of hose assemblies. Included are a hand or power operated pump, lubricant, cases, and trays.
What is a Catch Lever Tool? 12 Items: A Catch Lever Tool (LEVER TOOL,CATCH) is a specially designed hand tool which engages the opening and closing lever of a CATCH (as modified) for ease of operation. It is constructed of thin rigid material, usually flat, and one end has an engaging tongue.
What is a Manual Impact Wrench? 11 Items: A Manual Impact Wrench (WRENCH,IMPACT,MANUAL) is a manually operated handheld tool consisting of spring-loaded handle and a power-impact head which delivers a torsional impact from either continuous movement of the handle in one direction, or by a reciprocating action. It is used in tightening and loosening fasteners, such as bolts, nuts, and the like. The item may include sockets, extensions and offset fittings, nut runners, and the like.
What is a Drift? 63 Items: A Drift is an item consisting of a tubular body fitted with replaceable tips. It is designed to insert or remove mechanical components where space is restricted.
What is a Nutdriver? 46 Items: A Nutdriver is a non-powered hand tool with a screwdriver style handle, shaft and formed female hex or square socket at driving end.
What is a Locking Device Removal Tool? 12 Items: A Locking Device Removal Tool (REMOVAL TOOL,LOCKING DEVICE) is a hand tool designed to facilitate the removal of a WASHER, KEY and a LOCKING PLATE, NUT AND BOLT.
What is a Hydraulic Fitting Crimping Tool Head? 26 Items: A Hydraulic Fitting Crimping Tool Head (HEAD,CRIMPING TOOL,HYDRAULIC FITTING) is a component of a crimping tool used to compress fittings on fluid tubes. It consists of a U-shape item, in which, are mounted different sizes of DIE, CRIMPING TOOL for tubes of various diameters.
What is a Torque Screwdriver? 11 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.
What is a Special Purpose Combination Wrench? 13 Items: A Special Purpose Combination Wrench (WRENCH,COMBINATION,SPECIAL PURPOSE) is a tool having a combination of ends and facets. The ends may have open end, box or spanner characteristics. The sides may have features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s). Designed to fit specific items, not sized as standard or metric.
What is a Screwdriver Bit Holder? 56 Items: A Screwdriver Bit Holder (HOLDER,SCREWDRIVER BIT) is an attachment with a socket end for accepting male hexagon shank insert bits and a drive end for adapting to a portable power or hand tool.
What is a Telescoping Pole? 16 Items: A Telescoping Pole (POLE,TELESCOPING) is an item which is designed to be extended or compressed by the sliding of overlapping sections. This item may or may not be able to accommodate an extension.

Stock Items From Supply Class 5120 Page 15 of 110

5120-14-411-9181
Mechanical Puller

144119181
27980040: RNCC: 3 | RNVC: 2

16 Sep 1986

5120-14-236-4614
Box Wrench

142364614
60935MREP18: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-397-8218
Socket Wrench

143978218
M4Z6021000501: RNCC: 3 | RNVC: 2

31 Jan 1985

5120-14-540-8515
Hand Hammer

145408515
0103100201: RNCC: 3 | RNVC: 2

23 Apr 2004

5120-14-417-6800
Hand Hydraulic Jack

144176800
C13T: RNCC: 3 | RNVC: 9
RASC13T: RNCC: 5 | RNVC: 9

22 Jul 1987

5120-14-555-9148
Mechanical Puller

145559148
14100011483: RNCC: 3 | RNVC: 2

8 Jan 2008

5120-14-284-6178
Pipe Wrench

142846178
BBW219: RNCC: 3 | RNVC: 9

1 Jan 1972

5120-14-391-7100
Lamp Extractor

143917100
70359821: RNCC: 3 | RNVC: 2
70359821: RNCC: 5 | RNVC: 9

21 Mar 1984

5120-14-290-4070
Mechanical Puller

142904070
TMG: RNCC: 3 | RNVC: 2
ZINTMG: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-433-6962
Mechanical Puller

144336962
332A93-4202-00: RNCC: 3 | RNVC: 2

2 Aug 1989

5120-14-202-9662
Socket Wrench

142029662
NO PRIMARY REF14-202-9662: RNCC: 3 | RNVC: 2
533: RNCC: 5 | RNVC: 2

1 Jan 1963

5120-14-337-4412
Driftpin

143374412
6890-0808: RNCC: 3 | RNVC: 2

7 Oct 1976

5120-14-503-4287
Hand Rivet Set

145034287
853-620-066-0: RNCC: 3 | RNVC: 2

14 Jan 1998

5120-14-275-8903
Box Wrench

142758903
50-46: RNCC: 3 | RNVC: 2
50.46: RNCC: 3 | RNVC: 2
108-46: RNCC: 3 | RNVC: 2
119-46: RNCC: 3 | RNVC: 9
3272670297708: RNCC: 5 | RNVC: 2
DEM119-46: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-466-3797
Mechanical Puller

144663797
U21878200: RNCC: 3 | RNVC: 2

3 Nov 1993

5120-14-447-5620
Mechanical Puller

144475620
H21999: RNCC: 3 | RNVC: 2

29 May 1991

5120-14-202-1917
Saddler's Awl Haft

142021917
99: RNCC: 3 | RNVC: 2

1 Jan 1963

5120-14-425-9340
Drill Guide

144259340
640212: RNCC: 3 | RNVC: 2

28 Jul 1988

5120-14-503-6112
Seal Inserter

145036112
0110032071: RNCC: 3 | RNVC: 2

21 Jan 1998

5120-14-438-0927
Seal Inserter

144380927
NO PRIMARY REF14-438-0927: RNCC: 3 | RNVC: 2
391338: RNCC: 5 | RNVC: 9
391338: RNCC: 5 | RNVC: 9

7 Mar 1990

5120-14-501-4041
Socket Wrench Set

145014041
3511-310-84351: RNCC: 3 | RNVC: 2
3511-310-84351: RNCC: 5 | RNVC: 9

29 Oct 1997

5120-14-518-4435
Hand Screw Jack

145184435
21EPA24150-001: RNCC: 3 | RNVC: 2

8 Feb 2000

5120-14-300-9636
Mechanical Puller

143009636
341A93-3308-00: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-256-6022
Socket Wrench

142566022
92.24: RNCC: 3 | RNVC: 2
86-24: RNCC: 3 | RNVC: 2
168-24: RNCC: 3 | RNVC: 9
92-24: RNCC: 5 | RNVC: 2
3272670274488: RNCC: 5 | RNVC: 2
3148511280409: RNCC: 5 | RNVC: 2
0128040: RNCC: 5 | RNVC: 9
DEM168-24: RNCC: 5 | RNVC: 9

1 Jan 1969

5120-14-232-2207
Socket Wrench

142322207
NO PRIMARY REF14-232-2207: RNCC: 3 | RNVC: 2
1409-14X18: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-294-0716
Machinist's Vise

142940716
583547005: RNCC: 3 | RNVC: 2
4217-175FIXE: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-430-2608
Mechanical Puller

144302608
900277A: RNCC: 3 | RNVC: 2
905478-1AREP02: RNCC: 3 | RNVC: 2

15 Mar 1989

5120-14-285-4792
Machinist's Vise

142854792
3375-150: RNCC: 3 | RNVC: 9

1 Jan 1972

5120-14-455-0072
Hand Rivet Set

144550072
853-600-347-6: RNCC: 3 | RNVC: 2

1 May 1992

5120-14-404-1175
Socket Wrench

144041175
1715Z: RNCC: 3 | RNVC: 2
C2M-99-12.7: RNCC: 3 | RNVC: 2

11 Sep 1985

5120-14-333-2967
Socket Wrench

143332967
NO PRIMARY REF14-333-2967: RNCC: 3 | RNVC: 2
1711X1REP2: RNCC: 5 | RNVC: 9

2 Jul 1975

5120-14-447-3403
Mechanical Puller

144473403
U.306M: RNCC: 3 | RNVC: 2
3148510751849: RNCC: 5 | RNVC: 2
U306M: RNCC: 5 | RNVC: 2
91714524: RNCC: 5 | RNVC: 2
236-7642: RNCC: 5 | RNVC: 2
0075184: RNCC: 5 | RNVC: 9
FACOMU.306M: RNCC: 5 | RNVC: 9

15 May 1991

5120-14-381-0076
Ratchet Wrench

143810076
HB41-11/FAB49: RNCC: 3 | RNVC: 2
HB41-11: RNCC: 5 | RNVC: 2

14 Dec 1982

5120-14-378-5514
Mechanical Puller

143785514
6801J33-4026-00: RNCC: 3 | RNVC: 2
6801360A33-4026-00: RNCC: 5 | RNVC: 2

11 Aug 1982

5120-14-386-1564
Mechanical Puller

143861564
6801J33-2034-20: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-481-4829
Seal Inserter

144814829
NO PRIMARY REF14-481-4829: RNCC: 3 | RNVC: 2
806800: RNCC: 5 | RNVC: 9

8 May 1996

5120-14-400-1933
Mechanical Puller

144001933
330A98-2038-01: RNCC: 3 | RNVC: 2

24 Apr 1985

5120-14-452-3146
Mechanical Puller

144523146
600311: RNCC: 3 | RNVC: 2

8 Jan 1992

5120-14-360-4330
Box Wrench

143604330
35AM019: RNCC: 3 | RNVC: 2

23 Nov 1979

5120-14-274-3757
Ratchet Wrench

142743757
MT001200: RNCC: 3 | RNVC: 2
60867-10: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-386-1570
Mechanical Puller

143861570
6801J33-4051-00: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-463-1425
Mechanical Puller

144631425
50398: RNCC: 3 | RNVC: 2
85-695-0309: RNCC: 6 | RNVC: 9

26 May 1993

5120-14-553-1185
Nail Set

145531185
HB 0020: RNCC: 3 | RNVC: 2

5 Mar 2007

5120-14-527-7122
Seal Inserter

145277122
888-484-000-1: RNCC: 3 | RNVC: 2

14 Nov 2001

5120-14-497-4389
Oil Filter Wrench

144974389
NO PRIMARY REF14-497-4389: RNCC: 3 | RNVC: 2
U56PL: RNCC: 5 | RNVC: 9
F300 0T 023 1804: RNCC: 6 | RNVC: 9

15 Oct 1997

5120-14-480-1529
Box Wrench

144801529
888-392-300-1: RNCC: 3 | RNVC: 2

21 Feb 1996

5120-14-484-4319
Socket Wrench

144844319
888-391-800-2: RNCC: 3 | RNVC: 2

14 Nov 1996

5120-14-446-6370
Mechanical Puller

144466370
8813978000: RNCC: 3 | RNVC: 2

9 Apr 1991

5120-14-481-6021
Mechanical Puller

144816021
NO PRIMARY REF14-481-6021: RNCC: 3 | RNVC: 2
819421: RNCC: 5 | RNVC: 9

16 May 1996

5120-14-401-4117
Mechanical Puller

144014117
332A93-3221-00: RNCC: 3 | RNVC: 2

5 Jun 1985

5120-14-511-3843
Mechanical Puller

145113843
MGB114-25: RNCC: 3 | RNVC: 2
MGB114-25: RNCC: 5 | RNVC: 2

16 Dec 1998

5120-14-332-7013
Mechanical Puller

143327013
NO PRIMARY REF14-332-7013: RNCC: 3 | RNVC: 2
99300-78: RNCC: 5 | RNVC: 9

2 Jul 1975

5120-14-306-4361
Box Wrench

143064361
8810048008: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-433-3205
Seal Inserter

144333205
853-202-808-0: RNCC: 3 | RNVC: 2

19 Jul 1989

5120-14-534-5178
Rivet Bucking Bar

145345178
VHP500-102-3: RNCC: 3 | RNVC: 2

26 Mar 2003

5120-14-333-8678
Socket Wrench

143338678
M26-001: RNCC: 3 | RNVC: 2

23 Apr 1976

5120-14-460-6724
Oil Filter Wrench

144606724
CLE/FILTRE-7037-EMMCAT-CR.MARION: RNCC: 3 | RNVC: 2

4 Feb 1993

5120-14-457-9878
Mechanical Puller

144579878
540245: RNCC: 3 | RNVC: 2

2 Oct 1992

5120-14-478-5980
Mechanical Puller

144785980
MGB600-21: RNCC: 3 | RNVC: 2

8 Nov 1995

5120-14-301-3071
Drive Pin Punch

143013071
3130S95-12-045: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-450-4033
Socket Wrench

144504033
NO PRIMARY REF14-450-4033: RNCC: 3 | RNVC: 2
BL53977: RNCC: 5 | RNVC: 9

3 Oct 1991

5120-14-213-5587
Socket Wrench

142135587
91.28X29: RNCC: 3 | RNVC: 2
3111257: RNCC: 3 | RNVC: 2
3148511276204: RNCC: 5 | RNVC: 2
91-28X29: RNCC: 5 | RNVC: 2
VIR3111257: RNCC: 5 | RNVC: 9
0127620: RNCC: 5 | RNVC: 9
91-28X29-160X12: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-465-4726
Seal Inserter

144654726
851-500-179-0: RNCC: 3 | RNVC: 2

30 Sep 1993

5120-14-235-6971
Socket Wrench

142356971
33711: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-300-0671
Wood Mallet

143000671
D1204-28-8-8-1: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-321-8073
Mechanical Puller

143218073
3160S95-33-010-1: RNCC: 3 | RNVC: 2
85-100-3147: RNCC: 6 | RNVC: 9

1 Jan 1975

5120-14-511-3833
Mechanical Puller

145113833
MGB092-48: RNCC: 3 | RNVC: 2
MGB092-48: RNCC: 5 | RNVC: 2

16 Dec 1998

5120-14-418-1883
Mechanical Puller

144181883
332A93-3114-00: RNCC: 3 | RNVC: 2

6 Aug 1987

5120-14-228-1361
Drill Drift

142281361
970 23: RNCC: 3 | RNVC: 2
3255-2: RNCC: 3 | RNVC: 2
SYQ0922: RNCC: 5 | RNVC: 2
162-04-2: RNCC: 5 | RNVC: 9

1 Jan 1966

5120-14-486-5630
Drill Guide

144865630
RT13683: RNCC: 3 | RNVC: 2

24 Mar 1997

5120-14-285-4796
Hand Hammer

142854796
NO PRIMARY REF14-285-4796: RNCC: 3 | RNVC: 2
60240-40X40: RNCC: 5 | RNVC: 9
3896-40: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-405-0659
Hand Shovel

144050659
NO PRIMARY REF14-405-0659: RNCC: 3 | RNVC: 2
3180-29: RNCC: 5 | RNVC: 9

20 Nov 1985

5120-14-530-1981
Box Wrench

145301981
8040970Y00: RNCC: 3 | RNVC: 2

22 May 2002

5120-14-294-6514
Socket Wrench

142946514
02640002300: RNCC: 3 | RNVC: 2
026400023: RNCC: 5 | RNVC: 2
412727-23: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-425-6134
Socket Wrench

144256134
13-250-01-3: RNCC: 3 | RNVC: 2

13 Jul 1988

5120-14-535-2365
Mechanical Puller

145352365
6530POC: RNCC: 3 | RNVC: 2

14 May 2003

5120-14-438-3502
Piston Inserter

144383502
330A98-7523-00: RNCC: 3 | RNVC: 2

14 Mar 1990

5120-14-202-1918
Saddler's Awl Haft

142021918
100-1: RNCC: 3 | RNVC: 2

1 Jan 1963

5120-14-433-3223
Aligning Punch

144333223
853-202-850-0: RNCC: 3 | RNVC: 2

19 Jul 1989

5120-14-413-3183
Box Wrench

144133183
50.86-3'3/8: RNCC: 3 | RNVC: 2
3148511071205: RNCC: 5 | RNVC: 2
0107120: RNCC: 5 | RNVC: 9
50-86: RNCC: 5 | RNVC: 9

26 Nov 1986

5120-14-393-8805
Seal Inserter

143938805
NO PRIMARY REF14-393-8805: RNCC: 3 | RNVC: 2
0U139363: RNCC: 5 | RNVC: 9
OU139363: RNCC: 5 | RNVC: 9

23 Jun 1984

5120-14-264-3435
Blacksmiths' Tongs

142643435
3803-30: RNCC: 3 | RNVC: 9

1 Jan 1970

5120-14-464-4880
Rivet Bucking Bar

144644880
851-910-006-0: RNCC: 3 | RNVC: 2

4 Aug 1993

5120-14-475-5574
Mechanical Puller

144755574
0787330L00: RNCC: 3 | RNVC: 2

18 Apr 1995

5120-14-204-9330
Rack Bar Jack

142049330
F76028-5T: RNCC: 2 | RNVC: 2

1 Jan 1963

5120-14-548-2933
Socket Wrench Set

145482933
J.430ASP: RNCC: 3 | RNVC: 2

5 Jan 2006

5120-14-455-0149
Socket Wrench

144550149
151020: RNCC: 3 | RNVC: 2

1 May 1992

5120-14-288-4174
Socket Wrench

142884174
8810241001: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-461-6877
Socket Wrench

144616877
74.T11: RNCC: 3 | RNVC: 2

22 Mar 1993

5120-14-553-5934
Machinist's Vise

145535934
1222.175E: RNCC: 3 | RNVC: 2
3148512257400: RNCC: 5 | RNVC: 2

20 Apr 2007

5120-14-372-6568
Screw Extractor

143726568
HN2: RNCC: 3 | RNVC: 2
SKFHN2: RNCC: 5 | RNVC: 9

21 Sep 1981

5120-14-434-6664
Plastic Mallet

144346664
208A.40CB: RNCC: 3 | RNVC: 2
0147685: RNCC: 5 | RNVC: 2
208A40CB: RNCC: 5 | RNVC: 2
3148511476857: RNCC: 5 | RNVC: 2
91627171: RNCC: 5 | RNVC: 2
0536400: RNCC: 5 | RNVC: 2

27 Sep 1989

5120-14-392-0890
Box Wrench

143920890
853-100-117-0: RNCC: 3 | RNVC: 2

21 Mar 1984

5120-14-444-9493
Socket Wrench

144449493
76.7: RNCC: 3 | RNVC: 2
3148511207901: RNCC: 5 | RNVC: 2
91714855: RNCC: 5 | RNVC: 2
91714855: RNCC: 5 | RNVC: 2
162-4326: RNCC: 5 | RNVC: 2
76-7: RNCC: 5 | RNVC: 2
FACOM76.7: RNCC: 5 | RNVC: 9
0120790: RNCC: 5 | RNVC: 9

29 Jan 1991

5120-14-419-2587
Hand Rivet Set

144192587
530591: RNCC: 3 | RNVC: 2

16 Oct 1987

5120-14-344-7863
Mechanical Puller

143447863
8812805000: RNCC: 3 | RNVC: 2
85-689-3634: RNCC: 6 | RNVC: 9

9 Sep 1977

5120-14-374-0859
Box Wrench

143740859
UHC301-22: RNCC: 3 | RNVC: 2

8 Dec 1981

5120-14-432-7119
Seal Inserter

144327119
OUT50335: RNCC: 3 | RNVC: 2
0UT50335: RNCC: 5 | RNVC: 2

21 Jun 1989

5120-14-485-5881
Mechanical Puller

144855881
PL1NA003AA012625: RNCC: 3 | RNVC: 2

30 Jan 1997

5120-14-522-2462
Screwdriver Bit Set

145222462
AME.B4: RNCC: 3 | RNVC: 2
SYQ5657: RNCC: 5 | RNVC: 2
1130188P00: RNCC: 5 | RNVC: 2

11 Oct 2000

5120-14-445-6030
Socket Wrench

144456030
1038374F00: RNCC: 3 | RNVC: 2

19 Feb 1991

5120-14-281-7635
Mechanical Puller

142817635
A124565: RNCC: 3 | RNVC: 2
A124565-17DENTS: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-371-1585
Hand Hammer

143711585
865: RNCC: 3 | RNVC: 2

5 Jun 1981

5120-14-522-0936
Ratchet Wrench

145220936
1508: RNCC: 3 | RNVC: 2

4 Oct 2000

5120-14-413-3187
Box Wrench

144133187
50.93: RNCC: 3 | RNVC: 2
3148511071908: RNCC: 5 | RNVC: 2
50-93: RNCC: 5 | RNVC: 2
0107190: RNCC: 5 | RNVC: 9

26 Nov 1986

5120-14-218-0353
Mechanical Puller

142180353
NO PRIMARY REF14-218-0353: RNCC: 3 | RNVC: 2
41P2909-625: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-417-8473
Pinch Bar

144178473
150-150: RNCC: 3 | RNVC: 2
PINCEATAL0NR0NDE1500X35: RNCC: 5 | RNVC: 2

29 Jul 1987

5120-14-321-9202
Ratchet Wrench

143219202
GSM137-04: RNCC: 3 | RNVC: 2
000MA065F6: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-529-4252
Mechanical Puller

145294252
6401LOC004: RNCC: 3 | RNVC: 2

29 Mar 2002

5120-14-479-9494
Mechanical Puller

144799494
888-382-500-1: RNCC: 3 | RNVC: 2

14 Feb 1996

5120-14-466-6411
Hand Hydraulic Jack

144666411
KVER60: RNCC: 3 | RNVC: 2

17 Nov 1993

5120-14-210-9902
Drive Pin Punch

142109902
7C69: RNCC: 3 | RNVC: 2
711-10: RNCC: 3 | RNVC: 2
4445-7: RNCC: 3 | RNVC: 2
7C-69: RNCC: 3 | RNVC: 2
250-7: RNCC: 5 | RNVC: 2
3272670236677: RNCC: 5 | RNVC: 2
710-10: RNCC: 5 | RNVC: 2

1 Jan 1964

5120-14-330-4187
Socket Wrench

143304187
Y060-001-000B: RNCC: 3 | RNVC: 2
Y060-001B: RNCC: 3 | RNVC: 2
Y060-001A: RNCC: 5 | RNVC: 2

2 Jul 1975

5120-14-396-6823
Box Wrench

143966823
851-115-011-0: RNCC: 3 | RNVC: 2

27 Nov 1984

5120-14-378-5577
Mechanical Puller

143785577
6803P32-2003-00: RNCC: 3 | RNVC: 2
6803365A32-2003-00: RNCC: 5 | RNVC: 2

11 Aug 1982

5120-14-441-2123
Mechanical Puller

144412123
332A93-3226-20: RNCC: 3 | RNVC: 2

22 Aug 1990

5120-14-438-7789
Seal Inserter

144387789
330A94-3300-00: RNCC: 3 | RNVC: 2

4 Apr 1990

5120-14-256-8904
Box Wrench

142568904
9970-115-206: RNCC: 3 | RNVC: 2

1 Jan 1969

5120-14-437-7434
Mechanical Puller

144377434
9689160114: RNCC: 3 | RNVC: 2
9689160114: RNCC: 5 | RNVC: 2

14 Feb 1990

5120-14-464-4889
Rivet Bucking Bar

144644889
851-910-023-0: RNCC: 3 | RNVC: 2

4 Aug 1993

5120-14-218-9647
Socket Wrench

142189647
72-1-1-8: RNCC: 3 | RNVC: 2
80-1 1-8: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-443-2223
Crimping Tool Die

144432223
58247-1: RNCC: 3 | RNVC: 2

12 Nov 1990

5120-14-447-3852
Drift Pin Set

144473852
C3811-1: RNCC: 3 | RNVC: 2
89280402: RNCC: 5 | RNVC: 2

15 May 1991

5120-14-272-8933
Mechanical Puller

142728933
621-2: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-403-2365
Rack Bar Jack

144032365
8210100: RNCC: 3 | RNVC: 9
CCM10295M1: RNCC: 5 | RNVC: 9

31 Jul 1985

5120-14-273-3173
Box Wrench

142733173
E29-071-17DR0ITEC0URANTE: RNCC: 2 | RNVC: 2

1 Jan 1971

5120-14-264-3433
Blacksmiths' Tongs

142643433
3803-15: RNCC: 3 | RNVC: 9

1 Jan 1970

5120-14-260-3601
Mechanical Puller

142603601
3160S95-66-050: RNCC: 3 | RNVC: 2
3160-95-66-050: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-488-4862
Socket Wrench Set

144884862
74E.J1: RNCC: 3 | RNVC: 2
3148515320606: RNCC: 5 | RNVC: 2
74E-J1: RNCC: 5 | RNVC: 2
0532060: RNCC: 5 | RNVC: 9

14 May 1997

5120-14-364-4125
Mechanical Puller

143644125
341A98-2009-01: RNCC: 3 | RNVC: 2

7 Aug 1980

5120-14-544-1432
Seal Inserter

145441432
27981230F: RNCC: 3 | RNVC: 2

5 Jan 2005

5120-14-529-8675
Socket Wrench Set

145298675
S.440ER: RNCC: 3 | RNVC: 2
3148515165030: RNCC: 5 | RNVC: 2

17 Apr 2002

5120-14-530-6415
Seal Inserter

145306415
D47730R3: RNCC: 3 | RNVC: 2

1 Jul 2002

5120-14-461-6461
Hammer Handle

144616461
6643: RNCC: 3 | RNVC: 2

19 Mar 1993

5120-14-428-0630
Mechanical Puller

144280630
480: RNCC: 3 | RNVC: 2
3272670260290: RNCC: 5 | RNVC: 2

26 Nov 1988

5120-14-400-6884
Trowel

144006884
E75507-240: RNCC: 2 | RNVC: 2
2695 940 024: RNCC: 5 | RNVC: 2

8 May 1985

5120-14-449-7712
Drift Pin Set

144497712
M31-034A: RNCC: 3 | RNVC: 2

9 Sep 1991

5120-14-485-7347
Mechanical Puller

144857347
332A93-3686-00: RNCC: 3 | RNVC: 2

6 Feb 1997

5120-14-204-8251
Claw Bar

142048251
413-450: RNCC: 3 | RNVC: 2
413: RNCC: 5 | RNVC: 2
M0B413: RNCC: 5 | RNVC: 2
ACD450R: RNCC: 5 | RNVC: 2
91616378: RNCC: 5 | RNVC: 2

1 Jan 1963

5120-14-339-0178
Mechanical Puller

143390178
NO PRIMARY REF14-339-0178: RNCC: 3 | RNVC: 2
0067860: RNCC: 5 | RNVC: 2
U32-200: RNCC: 5 | RNVC: 2
U32.200: RNCC: 5 | RNVC: 2
91604537: RNCC: 5 | RNVC: 2

17 Dec 1976

5120-14-232-1737
Box Wrench

142321737
100 15-16X1: RNCC: 3 | RNVC: 2
100-15-16X1: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-523-8309
Hand Screw Jack

145238309
756-4T: RNCC: 3 | RNVC: 2

6 Feb 2001

5120-14-218-9635
Socket Wrench

142189635
80 1/2: RNCC: 3 | RNVC: 2
72-1/2: RNCC: 3 | RNVC: 2
72-1-2: RNCC: 5 | RNVC: 2
80 1-2: RNCC: 5 | RNVC: 2

1 Jan 1965

5120-14-465-4658
Seal Inserter

144654658
851-500-082-0: RNCC: 3 | RNVC: 2

30 Sep 1993

5120-14-412-9791
Socket Wrench

144129791
853-100-236-0: RNCC: 3 | RNVC: 2

5 Nov 1986

5120-14-319-2268
Pipe Vise

143192268
2003400: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-549-9609
Box Wrench

145499609
55A.7/16X1/2: RNCC: 3 | RNVC: 2
55A.7/16X1/2: RNCC: 5 | RNVC: 2

19 May 2006

5120-14-427-4805
Mechanical Puller

144274805
D.93: RNCC: 3 | RNVC: 2
D93: RNCC: 5 | RNVC: 2
3148510196978: RNCC: 5 | RNVC: 2
0019697: RNCC: 5 | RNVC: 9

20 Oct 1988

5120-14-548-3048
Socket Wrench Set

145483048
S.442 EP: RNCC: 3 | RNVC: 2

5 Jan 2006

5120-14-359-0451
Socket Wrench

143590451
75.1'1/8: RNCC: 3 | RNVC: 2
75-1 1-8: RNCC: 5 | RNVC: 2
3148511205204: RNCC: 5 | RNVC: 2
75-1-1-8: RNCC: 5 | RNVC: 2
0120520: RNCC: 5 | RNVC: 9

7 Sep 1979

5120-14-463-7593
Drive Pin Punch

144637593
251A.4: RNCC: 3 | RNVC: 2
251A4: RNCC: 5 | RNVC: 2
3148511601754: RNCC: 5 | RNVC: 2
10905C00: RNCC: 5 | RNVC: 2
1060175: RNCC: 5 | RNVC: 9

28 Jun 1993

5120-14-517-4634
Lamp Cap Extractor

145174634
61-9730-0: RNCC: 3 | RNVC: 2
61-9730-0: RNCC: 5 | RNVC: 2

15 Dec 1999

5120-14-379-2920
Socket Wrench

143792920
3-19904: RNCC: 3 | RNVC: 2

6 Sep 1982

5120-14-254-7152
Socket Wrench

142547152
72579M: RNCC: 3 | RNVC: 2

1 Jan 1969

5120-14-402-8564
Tool Handle Wedge

144028564
1-13X15: RNCC: 3 | RNVC: 2

19 Jul 1985

5120-14-316-5648
Mechanical Puller

143165648
3210-97-33-360: RNCC: 3 | RNVC: 2
08-385: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-427-2203
Mechanical Puller

144272203
46MS047-06: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-402-3669
Mechanical Puller

144023669
332A98-3400-00: RNCC: 3 | RNVC: 2

3 Jul 1985

5120-14-361-0412
Ratchet Wrench

143610412
D19-30REPHAN: RNCC: 3 | RNVC: 2

19 Dec 1979

5120-14-242-9464
Ratchet Wrench

142429464
NO PRIMARY REF14-242-9464: RNCC: 3 | RNVC: 2
214MTB1: RNCC: 5 | RNVC: 2
0M2B: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-406-6553
Mechanical Puller

144066553
853-200-814-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-294-8628
Hand Hammer Head

142948628
E71-014-250: RNCC: 2 | RNVC: 2
1-26: RNCC: 3 | RNVC: 2
85-679-5500: RNCC: 6 | RNVC: 9

1 Jan 1973

5120-14-525-5046
Mechanical Puller

145255046
1271: RNCC: 3 | RNVC: 2

6 Jun 2001

5120-14-222-7495
Box Wrench

142227495
56 1-2X9-16: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-516-9010
Hand Hammer

145169010
205.F10: RNCC: 3 | RNVC: 2

20 Oct 1999

5120-14-317-2983
Socket Wrench

143172983
SBE273: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-544-7137
Oil Filter Wrench

145447137
330960568: RNCC: 3 | RNVC: 2

17 Feb 2005

5120-14-322-8158
Socket Wrench

143228158
36KMS246: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-425-9444
Aligning Punch

144259444
TH20C2-1-4A8: RNCC: 3 | RNVC: 2

28 Jul 1988

5120-14-367-6235
Socket Wrench

143676235
91PAA: RNCC: 3 | RNVC: 2

19 Jan 1981

5120-14-553-3043
Mechanical Puller

145533043
U.306.180: RNCC: 3 | RNVC: 2
3148510751764: RNCC: 5 | RNVC: 2

22 Mar 2007

5120-14-285-4571
Socket Wrench

142854571
21498: RNCC: 3 | RNVC: 2
520106: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-552-8420
Mechanical Puller

145528420
U.306A130N: RNCC: 3 | RNVC: 2
131533: RNCC: 5 | RNVC: 2

7 Feb 2007

5120-14-355-6185
Drill Drift

143556185
CLAVETTE5-6: RNCC: 3 | RNVC: 2

19 Mar 1979

5120-14-535-3370
Mechanical Puller

145353370
29130558-2: RNCC: 3 | RNVC: 2
8043634D00: RNCC: 5 | RNVC: 2

22 May 2003

5120-14-346-7912
Hand Hammer

143467912
130728: RNCC: 3 | RNVC: 2

19 Jan 1978

5120-14-472-8601
Socket Wrench

144728601
418227: RNCC: 3 | RNVC: 2
418227-001: RNCC: 5 | RNVC: 9

16 Nov 1994

5120-14-420-9701
Claw Bar

144209701
259A320: RNCC: 3 | RNVC: 2

6 Jan 1988

5120-14-371-8031
Socket Wrench

143718031
8812338000: RNCC: 3 | RNVC: 2
85-691-5566: RNCC: 6 | RNVC: 9

5 Aug 1981

5120-14-206-8004
Backing Out Punch

142068004
M0B227-10: RNCC: 3 | RNVC: 2
0227100610: RNCC: 3 | RNVC: 2
107CHASSERIVET10: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-307-7423
Mechanical Puller

143077423
GSM196-035F1: RNCC: 3 | RNVC: 2
321MA0039REP41: RNCC: 5 | RNVC: 2
321MA039REP41: RNCC: 5 | RNVC: 2

1 Jan 1974

5120-14-539-9774
Rivet Bucking Bar

145399774
BC-485: RNCC: 3 | RNVC: 2

25 Feb 2004

5120-14-285-4573
Socket Wrench

142854573
21496: RNCC: 3 | RNVC: 2
520104: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-341-6519
Socket Wrench

143416519
B.14R: RNCC: 3 | RNVC: 2
3148510135007: RNCC: 5 | RNVC: 2
B14R: RNCC: 5 | RNVC: 2
7701400458: RNCC: 5 | RNVC: 2
0013500: RNCC: 5 | RNVC: 9

14 Apr 1977

5120-14-402-0076
Hand Hammer

144020076
2606125: RNCC: 3 | RNVC: 2

26 Jun 1985

5120-14-405-0655
Paint Strainer

144050655
NO PRIMARY REF14-405-0655: RNCC: 3 | RNVC: 2
1845-160: RNCC: 5 | RNVC: 9

20 Nov 1985

5120-14-439-0282
Mechanical Puller

144390282
365A93-3450-00: RNCC: 3 | RNVC: 2
85-694-1511: RNCC: 6 | RNVC: 9

19 Apr 1990

5120-14-466-2562
Hand Screw Jack

144662562
0XB501-009-200-54: RNCC: 3 | RNVC: 2

3 Nov 1993

5120-14-329-8497
Plastic Mallet

143298497
968-25: RNCC: 3 | RNVC: 9
63070: RNCC: 5 | RNVC: 9
632070: RNCC: 5 | RNVC: 9
DEM968-25: RNCC: 5 | RNVC: 9

2 Jul 1975

5120-14-479-0321
Mechanical Puller

144790321
888-377-500-1: RNCC: 3 | RNVC: 2

6 Dec 1995

5120-14-279-5894
Ratchet Wrench

142795894
13-62A62TER32: RNCC: 2 | RNVC: 2
323-10DR0ITEETGAUCHE32: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-413-9833
Socket Wrench

144139833
NO PRIMARY REF14-413-9833: RNCC: 3 | RNVC: 2
C0P602-007-200-267: RNCC: 5 | RNVC: 9

22 Jan 1987

5120-14-485-8813
Open End Box Wrench

144858813
K7739-12101: RNCC: 3 | RNVC: 2
12101: RNCC: 5 | RNVC: 2

19 Feb 1997

5120-14-252-6795
Socket Wrench

142526795
225-5220: RNCC: 3 | RNVC: 2
225-5220: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-303-6292
Open End Box Wrench

143036292
NO PRIMARY REF14-303-6292: RNCC: 3 | RNVC: 2
104-29X32: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-413-3179
Box Wrench

144133179
50.76-3': RNCC: 3 | RNVC: 2
3148511070208: RNCC: 5 | RNVC: 2
0107020: RNCC: 5 | RNVC: 9
50-76: RNCC: 5 | RNVC: 9

26 Nov 1986

5120-14-204-9262
Socket Wrench

142049262
56-16X19: RNCC: 3 | RNVC: 2

1 Jan 1963

5120-14-380-6765
Hand Hammer

143806765
E71-012-630EMC0R: RNCC: 2 | RNVC: 2
400-63EC: RNCC: 3 | RNVC: 2
E71-012-32EM: RNCC: 5 | RNVC: 2
E71-012-32EMC0R: RNCC: 5 | RNVC: 2
400-32EC: RNCC: 5 | RNVC: 2

29 Nov 1982

5120-14-448-6399
Socket Wrench

144486399
W-1921: RNCC: 3 | RNVC: 9
101 100-30: RNCC: 3 | RNVC: 9

4 Jul 1991

5120-14-527-7156
Seal Inserter

145277156
888-490-600-1: RNCC: 3 | RNVC: 2

14 Nov 2001

5120-14-418-2036
Open End Box Wrench

144182036
43-1-2X9-16: RNCC: 3 | RNVC: 2

6 Aug 1987

5120-14-532-1823
Ratchet Wrench

145321823
68B.3/4X13/16: RNCC: 3 | RNVC: 2
68B3/4X13/16: RNCC: 5 | RNVC: 2
3148511163009: RNCC: 5 | RNVC: 2

16 Oct 2002

5120-14-280-3932
Drive Pin Punch

142803932
SA13-5-01-02-004: RNCC: 3 | RNVC: 2
SA135-01-02-004: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-330-2398
Socket Wrench

143302398
MS1210: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-264-3221
Hand Rivet Set

142643221
13-11-10: RNCC: 2 | RNVC: 2

1 Jan 1970

5120-14-432-7223
Seal Inserter

144327223
OUT50159-4: RNCC: 3 | RNVC: 2
0UT50159-4: RNCC: 5 | RNVC: 2

21 Jun 1989

5120-14-399-8612
Drive Pin Punch

143998612
14000706-4: RNCC: 3 | RNVC: 2

9 Apr 1985

5120-14-366-8459
Driftpin

143668459
30MS087-802D: RNCC: 3 | RNVC: 2

20 Nov 1980

5120-14-524-4975
Box Wrench

145244975
6503POC: RNCC: 3 | RNVC: 2

21 Mar 2001

5120-14-201-0467
Hand Hammer

142010467
NO PRIMARY REF14-201-0467: RNCC: 3 | RNVC: 2
74754-1000: RNCC: 5 | RNVC: 9

1 Jan 1962

5120-14-296-0130
Rack Bar Jack

142960130
F76-028-1X5T: RNCC: 2 | RNVC: 2

1 Jan 1973

5120-14-371-1579
Socket Wrench

143711579
66-20X22: RNCC: 3 | RNVC: 2
3148511151204: RNCC: 5 | RNVC: 2

5 Jun 1981

5120-14-204-9851
Crowbar

142049851
NO PRIMARY REF14-204-9851: RNCC: 3 | RNVC: 2
FIG3-3000: RNCC: 5 | RNVC: 9

1 Jan 1963

5120-14-218-9650
Socket Wrench

142189650
3107250: RNCC: 3 | RNVC: 2
0117520: RNCC: 3 | RNVC: 2
80-50: RNCC: 3 | RNVC: 2
122-50: RNCC: 3 | RNVC: 9
72-50: RNCC: 5 | RNVC: 2
72.50: RNCC: 5 | RNVC: 2
VIR3107250: RNCC: 5 | RNVC: 9
DEM122-50: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-442-1511
Hand Rivet Set

144421511
853-600-243-6: RNCC: 3 | RNVC: 2

3 Oct 1990

5120-14-461-8152
Socket Wrench

144618152
89-12: RNCC: 3 | RNVC: 2

29 Mar 1993

5120-14-210-9831
Socket Wrench

142109831
80-21: RNCC: 3 | RNVC: 2
3107221: RNCC: 3 | RNVC: 2
122-21: RNCC: 3 | RNVC: 9
DEM122-21: RNCC: 5 | RNVC: 9
VIR3107221: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-231-6632
Ratchet Wrench

142316632
20-1-15: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-527-9164
Mechanical Puller

145279164
888-504-600-1: RNCC: 3 | RNVC: 2

28 Nov 2001

5120-14-201-2936
Hand Hammer

142012936
NO PRIMARY REF14-201-2936: RNCC: 3 | RNVC: 2
3BISTETETAILLEE: RNCC: 5 | RNVC: 9

1 Jan 1962

5120-14-207-5535
Socket Wrench Set

142075535
NO PRIMARY REF14-207-5535: RNCC: 3 | RNVC: 2
W12-31BM: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-376-1486
Socket Wrench

143761486
0130045: RNCC: 3 | RNVC: 2
97-12: RNCC: 3 | RNVC: 2
3272670295193: RNCC: 5 | RNVC: 2
99A.12: RNCC: 5 | RNVC: 2
99-12: RNCC: 5 | RNVC: 2

30 Mar 1982

5120-14-535-2366
Mechanical Puller

145352366
6531POC: RNCC: 3 | RNVC: 2

14 May 2003

5120-14-381-6642
Hand Rivet Set

143816642
AA7,62NF1-1676: RNCC: 3 | RNVC: 2
AA7-62NF1-1676: RNCC: 5 | RNVC: 2

25 Jan 1983

5120-14-458-8426
Hand Rivet Set

144588426
851-910-046-0: RNCC: 3 | RNVC: 2

5 Nov 1992

5120-14-222-7479
Box Wrench

142227479
30-5-8X3-4: RNCC: 3 | RNVC: 2
101 5-8X3-4: RNCC: 5 | RNVC: 2

1 Jan 1966

5120-14-442-3620
Box Wrench

144423620
68B.17X19: RNCC: 3 | RNVC: 2
0714 23 28: RNCC: 5 | RNVC: 2
91635827: RNCC: 5 | RNVC: 2
3148511162484: RNCC: 5 | RNVC: 2
0116248: RNCC: 5 | RNVC: 9

15 Oct 1990

5120-14-550-3319
Drive Pin Punch Set

145503319
249.RTJ1: RNCC: 3 | RNVC: 2

16 Jun 2006

5120-14-426-5541
Hand Hydraulic Jack

144265541
CT10B: RNCC: 3 | RNVC: 9
RASCT10B: RNCC: 5 | RNVC: 9

8 Sep 1988

5120-14-459-9275
Mechanical Puller

144599275
76145917200: RNCC: 3 | RNVC: 2
N658900: RNCC: 5 | RNVC: 2

4 Jan 1993

5120-14-427-0961
Mechanical Puller

144270961
540494: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-298-4568
Hand Hammer

142984568
863-60: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-418-2039
Socket Wrench

144182039
66.5/8X3/4: RNCC: 3 | RNVC: 2
3148511154403: RNCC: 5 | RNVC: 2
66-5-8X3-4: RNCC: 5 | RNVC: 2
0115440: RNCC: 5 | RNVC: 9

6 Aug 1987

5120-14-218-0002
Drive Pin Punch

142180002
711-6: RNCC: 3 | RNVC: 2
4445-4-5: RNCC: 3 | RNVC: 2
71106: RNCC: 5 | RNVC: 2

1 Jan 1965

5120-14-465-4725
Aligning Punch

144654725
851-500-178-0: RNCC: 3 | RNVC: 2

30 Sep 1993

5120-14-511-5899
Drive Pin Punch

145115899
249.G2: RNCC: 3 | RNVC: 2
159450: RNCC: 5 | RNVC: 2
3148511594506: RNCC: 5 | RNVC: 2
1109700F00: RNCC: 5 | RNVC: 2

6 Jan 1999

5120-14-508-3286
Mechanical Puller

145083286
8007134C00: RNCC: 3 | RNVC: 2

4 Sep 1998

5120-14-481-2890
Seal Inserter

144812890
NO PRIMARY REF14-481-2890: RNCC: 3 | RNVC: 2
586449: RNCC: 5 | RNVC: 9

25 Apr 1996

5120-14-210-9824
Socket Wrench

142109824
80-9: RNCC: 3 | RNVC: 2
3107109: RNCC: 3 | RNVC: 2
162-9: RNCC: 3 | RNVC: 9
DEM162-9: RNCC: 5 | RNVC: 9
VIR3107109: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-401-6298
Aligning Punch

144016298
8813926000: RNCC: 3 | RNVC: 2

13 Jun 1985

5120-14-440-0275
Mechanical Puller

144400275
16025000D: RNCC: 3 | RNVC: 2

29 Jun 1990

5120-14-540-0108
Aligning Punch

145400108
6501BMV100001: RNCC: 3 | RNVC: 2

25 Feb 2004

5120-14-432-7176
Seal Inserter

144327176
OUT50094: RNCC: 3 | RNVC: 2
0UT50094: RNCC: 5 | RNVC: 2

21 Jun 1989

5120-14-204-9381
Trowel

142049381
4763: RNCC: 3 | RNVC: 9
420: RNCC: 5 | RNVC: 2
6332: RNCC: 5 | RNVC: 9
420: RNCC: 5 | RNVC: 9

1 Jan 1963

5120-14-301-0958
Mechanical Puller

143010958
330A93-3415-00: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-532-1145
Mechanical Puller

145321145
S639V3003101: RNCC: 3 | RNVC: 2

9 Oct 2002

5120-14-447-5738
Mechanical Puller

144475738
14189750R: RNCC: 3 | RNVC: 2

29 May 1991

5120-14-304-4471
Box Wrench

143044471
20-711-12: RNCC: 3 | RNVC: 2
207-11-12: RNCC: 5 | RNVC: 2

1 Jan 1974

5120-14-220-5151
Drill Drift

142205151
3160-95-33-007: RNCC: 3 | RNVC: 2
3160S95-33-007: RNCC: 5 | RNVC: 2

1 Jan 1965

5120-14-459-5852
Socket Wrench

144595852
659-800-038: RNCC: 3 | RNVC: 2

10 Dec 1992

5120-14-040-7918
Mechanical Puller

140407918
000342005P: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-411-6305
Mechanical Puller

144116305
226449: RNCC: 3 | RNVC: 2

27 Aug 1986

5120-14-459-5245
Mechanical Puller

144595245
3574-506: RNCC: 3 | RNVC: 2

10 Dec 1992

5120-14-400-6867
Mechanical Puller

144006867
24545941900: RNCC: 3 | RNVC: 2
245459419: RNCC: 5 | RNVC: 9

8 May 1985

5120-14-399-3311
Mechanical Puller

143993311
100-489: RNCC: 3 | RNVC: 2

6 Mar 1985

5120-14-542-9428
Seal Inserter

145429428
8460007: RNCC: 3 | RNVC: 2
8460007: RNCC: 5 | RNVC: 2

14 Aug 2004

5120-14-523-8928
Socket Wrench

145238928
919-016: RNCC: 3 | RNVC: 2

8 Feb 2001

5120-14-201-5655
Scratch Awl

142015655
NO PRIMARY REF14-201-5655: RNCC: 3 | RNVC: 2
109-7M: RNCC: 5 | RNVC: 9

1 Jan 1962

5120-14-359-0450
Socket Wrench

143590450
75.1'1/4: RNCC: 3 | RNVC: 2
3148511205600: RNCC: 5 | RNVC: 2
75-1 1-4: RNCC: 5 | RNVC: 2
75-1-1-4: RNCC: 5 | RNVC: 2
0120560: RNCC: 5 | RNVC: 9

7 Sep 1979

5120-14-441-2113
Mechanical Puller

144412113
332A93-3225-01: RNCC: 3 | RNVC: 2

22 Aug 1990

5120-14-419-1691
Socket Wrench

144191691
NO PRIMARY REF14-419-1691: RNCC: 3 | RNVC: 2
108295: RNCC: 5 | RNVC: 9

8 Oct 1987

5120-14-427-5663
Seal Inserter

144275663
851-500-145-0: RNCC: 3 | RNVC: 2

20 Oct 1988

5120-14-441-2114
Cant Hook

144412114
332A93-3225-20: RNCC: 3 | RNVC: 2

22 Aug 1990

5120-14-218-9342
Box Wrench

142189342
6388-80837-02: RNCC: 3 | RNVC: 9
86727: RNCC: 5 | RNVC: 2

1 Jan 1965

5120-14-232-7895
Hand Hammer

142327895
GS156-3: RNCC: 3 | RNVC: 2
202400-0,5KG: RNCC: 3 | RNVC: 9
BB15: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-386-6713
Box Wrench

143866713
853-100-004-0: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-201-1372
C Clamp

142011372
1277-100: RNCC: 3 | RNVC: 2

1 Jan 1962

5120-14-309-9515
Socket Wrench Set

143099515
NO PRIMARY REF14-309-9515: RNCC: 3 | RNVC: 2
0516900: RNCC: 5 | RNVC: 2
S.450E: RNCC: 5 | RNVC: 2
S450E: RNCC: 5 | RNVC: 2
91577067: RNCC: 5 | RNVC: 2

1 Jan 1974

5120-14-317-0392
Mechanical Puller

143170392
RT4906: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-441-2313
Mechanical Puller

144412313
6805V32-2155-00: RNCC: 3 | RNVC: 2

22 Aug 1990

5120-14-357-9939
Box Wrench

143579939
MHC303-23: RNCC: 3 | RNVC: 2
MHC303-23: RNCC: 5 | RNVC: 2

20 Jul 1979

5120-14-451-5374
Seal Inserter

144515374
45056032: RNCC: 3 | RNVC: 2
F117168: RNCC: 5 | RNVC: 2
45056032: RNCC: 5 | RNVC: 9

21 Nov 1991

5120-14-411-1954
Mechanical Puller

144111954
332A93-3120-00: RNCC: 3 | RNVC: 2

6 Aug 1986

5120-14-451-7799
Mechanical Puller

144517799
600093: RNCC: 3 | RNVC: 2

4 Dec 1991

5120-14-548-0092
Mechanical Puller

145480092
61482724AA: RNCC: 3 | RNVC: 2

5 Dec 2005

5120-14-401-4103
Seal Inserter

144014103
332A93-3201-00: RNCC: 3 | RNVC: 2

5 Jun 1985

5120-14-253-8743
Mechanical Puller

142538743
NO PRIMARY REF14-253-8743: RNCC: 3 | RNVC: 2
21B8047: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-439-1813
Seal Inserter

144391813
MEH166/1: RNCC: 3 | RNVC: 2
89231090: RNCC: 5 | RNVC: 2
MEH166-1: RNCC: 5 | RNVC: 2
89280405: RNCC: 5 | RNVC: 2

25 Apr 1990

5120-14-399-4162
Hammer Handle

143994162
210MC2: RNCC: 3 | RNVC: 2

6 Mar 1985

5120-14-527-7124
Seal Inserter

145277124
888-485-100-1: RNCC: 3 | RNVC: 2

14 Nov 2001

5120-14-464-2475
Mechanical Puller

144642475
854-500-387-0: RNCC: 3 | RNVC: 2

28 Jul 1993

5120-14-224-7450
Socket Wrench

142247450
NO PRIMARY REF14-224-7450: RNCC: 3 | RNVC: 2
0117090: RNCC: 5 | RNVC: 2
72-7: RNCC: 5 | RNVC: 2
72-7H: RNCC: 5 | RNVC: 2
72.7H: RNCC: 5 | RNVC: 2
0110812E00: RNCC: 5 | RNVC: 2
479946F: RNCC: 5 | RNVC: 2
91355437: RNCC: 5 | RNVC: 2

1 Jan 1966

5120-14-373-0069
Open End Box Wrench

143730069
9970-115-681: RNCC: 3 | RNVC: 2
85-689-8778: RNCC: 6 | RNVC: 9

21 Sep 1981

5120-14-365-1638
Mechanical Puller

143651638
M02024: RNCC: 3 | RNVC: 2
0000330986: RNCC: 5 | RNVC: 2
0000330986: RNCC: 5 | RNVC: 9
330986: RNCC: 5 | RNVC: 9

2 Sep 1980

5120-14-202-1713
Mechanical Puller

142021713
8810401000: RNCC: 3 | RNVC: 2
8000376500: RNCC: 5 | RNVC: 2
881-0-401-000: RNCC: 5 | RNVC: 2
800-03-765-00: RNCC: 5 | RNVC: 2

1 Jan 1963

5120-14-329-6303
Mechanical Puller

143296303
MS1395: RNCC: 3 | RNVC: 2
MS1395: RNCC: 5 | RNVC: 9

2 Jul 1975

5120-14-398-1989
Box Wrench

143981989
853-100-091-0: RNCC: 3 | RNVC: 2

31 Jan 1985

5120-14-470-6576
Mechanical Puller

144706576
103.257-00: RNCC: 3 | RNVC: 2

29 Jun 1994

5120-14-509-9553
Socket Wrench

145099553
26-178-1: RNCC: 3 | RNVC: 2
5120AA1119158: RNCC: 6 | RNVC: 9

4 Nov 1998

5120-14-201-3170
Hand Hammer

142013170
E71-014-1600EMCOR: RNCC: 2 | RNVC: 2
E71-013-50EM: RNCC: 5 | RNVC: 2

1 Jan 1962

5120-14-471-7063
Open End Box Wrench

144717063
70A.15/16: RNCC: 3 | RNVC: 2
3148511167205: RNCC: 5 | RNVC: 2
0116720: RNCC: 5 | RNVC: 9

13 Sep 1994

5120-14-366-0077
Mechanical Puller

143660077
330A93-3410-02: RNCC: 3 | RNVC: 2

4 Nov 1980

5120-14-483-8599
Mechanical Puller

144838599
0-64184-10: RNCC: 3 | RNVC: 2

5 Oct 1996

5120-14-250-1942
Box Wrench

142501942
NO PRIMARY REF14-250-1942: RNCC: 3 | RNVC: 2
14MLREP8: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-305-6156
Socket Wrench

143056156
28-416-07-06: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-440-1833
Mechanical Puller

144401833
332A93-3120-01: RNCC: 3 | RNVC: 2

11 Jul 1990

5120-14-206-8137
Wood Mallet

142068137
NO PRIMARY REF14-206-8137: RNCC: 3 | RNVC: 2
282-283: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-250-0093
Box Wrench

142500093
55.22X24: RNCC: 3 | RNVC: 2
105N22X24: RNCC: 3 | RNVC: 2
111-22X24: RNCC: 3 | RNVC: 9
3148511111802: RNCC: 5 | RNVC: 2
55-22X24: RNCC: 5 | RNVC: 2
0713 305 224: RNCC: 5 | RNVC: 2
0111180: RNCC: 5 | RNVC: 9
DEM111-22X24: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-466-3824
Mechanical Puller

144663824
62AM025: RNCC: 3 | RNVC: 2

3 Nov 1993

5120-14-524-6764
Mechanical Puller

145246764
47176292: RNCC: 3 | RNVC: 2
10305559: RNCC: 5 | RNVC: 2

4 Apr 2001

5120-14-425-9636
Aligning Punch

144259636
6211: RNCC: 3 | RNVC: 2

28 Jul 1988

5120-14-526-9190
Seal Inserter

145269190
TM0357G001: RNCC: 3 | RNVC: 2

17 Sep 2001

5120-14-406-6559
Mechanical Puller

144066559
853-200-821-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-517-3803
Mechanical Puller

145173803
0XB501-008-200-11: RNCC: 3 | RNVC: 2

8 Dec 1999

5120-14-530-6381
Seal Inserter

145306381
D47691R4: RNCC: 3 | RNVC: 2

1 Jul 2002

5120-14-294-0698
Tack Claw

142940698
4609: RNCC: 3 | RNVC: 9

1 Jan 1973

5120-14-205-5923
Seal Inserter

142055923
253-5M365-1A1P1A: RNCC: 3 | RNVC: 9
PA253-5M365-1A1P1A: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-201-6826
Hand Tube Bender

142016826
NO PRIMARY REF14-201-6826: RNCC: 3 | RNVC: 2
C511: RNCC: 5 | RNVC: 9

1 Jan 1962

5120-14-471-8068
Hand Beading Tool

144718068
853-600-497-0: RNCC: 3 | RNVC: 2

14 Sep 1994

5120-14-330-7072
Mechanical Puller

143307072
BR4X550: RNCC: 3 | RNVC: 2
4X550: RNCC: 5 | RNVC: 2
TL3675: RNCC: 5 | RNVC: 2
85-100-4944: RNCC: 6 | RNVC: 9

2 Jul 1975

5120-14-254-5377
Socket Wrench

142545377
P02426: RNCC: 3 | RNVC: 2

1 Jan 1969

5120-14-381-2666
Hand Rivet Set

143812666
M02058: RNCC: 3 | RNVC: 2
330719: RNCC: 5 | RNVC: 2

25 Jan 1983

5120-14-484-4333
Mechanical Puller

144844333
888-424-300-1: RNCC: 3 | RNVC: 2

14 Nov 1996

5120-14-435-0683
Box Wrench

144350683
853-100-244-0: RNCC: 3 | RNVC: 2

18 Oct 1989

5120-14-416-1519
Hand Hammer

144161519
0138500301: RNCC: 3 | RNVC: 2
138-5000EC: RNCC: 3 | RNVC: 2
137-5000EC: RNCC: 5 | RNVC: 2

3 Jun 1987

5120-14-210-9834
Socket Wrench

142109834
80-29: RNCC: 3 | RNVC: 2
3107229: RNCC: 3 | RNVC: 2
122-29: RNCC: 3 | RNVC: 9
VIR3107229: RNCC: 5 | RNVC: 9
DEM122-29: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-458-6211
Open End Box Wrench

144586211
853-100-291-0: RNCC: 3 | RNVC: 2

29 Oct 1992

5120-14-303-0571
Box Wrench

143030571
55.8X9: RNCC: 3 | RNVC: 2
105N8X9: RNCC: 3 | RNVC: 2
111-8X9: RNCC: 3 | RNVC: 9
3148511108208: RNCC: 5 | RNVC: 2
55-8X9: RNCC: 5 | RNVC: 2
0713 305 089: RNCC: 5 | RNVC: 2
0110820: RNCC: 5 | RNVC: 9
DEM111-8X9: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-465-9544
Socket Wrench

144659544
62000396: RNCC: 3 | RNVC: 2

22 Oct 1993

5120-14-546-4247
Hand Hammer

145464247
1SH415722222: RNCC: 3 | RNVC: 2

4 Jul 2005

5120-14-454-0090
Seal Inserter

144540090
09P1117: RNCC: 3 | RNVC: 2

19 Mar 1992

5120-14-482-1452
Hand Rivet Set

144821452
0859-6-78: RNCC: 3 | RNVC: 2
0859-6-78: RNCC: 5 | RNVC: 9

20 Jun 1996

5120-14-528-0542
C Clamp

145280542
271A.120L: RNCC: 3 | RNVC: 2

12 Dec 2001

5120-14-534-2219
Socket Wrench

145342219
86DT30X32: RNCC: 3 | RNVC: 2

17 Mar 2003

5120-14-339-5438
Mechanical Puller

143395438
050A51-519974B: RNCC: 3 | RNVC: 2

18 Jan 1977

5120-14-544-3291
Rack Bar Jack

145443291
22355-991: RNCC: 3 | RNVC: 2

20 Jan 2005

5120-14-508-0087
Crimping Tool Die

145080087
3437-2: RNCC: 3 | RNVC: 2
8931600010: RNCC: 5 | RNVC: 9

26 Aug 1998

5120-14-522-8228
Socket Wrench

145228228
19047.120.U0050: RNCC: 3 | RNVC: 2

29 Nov 2000

5120-14-378-2902
Hand Hammer

143782902
154704: RNCC: 3 | RNVC: 2

20 Jul 1982

5120-14-437-0711
Seal Inserter

144370711
851-200-036-0: RNCC: 3 | RNVC: 2

17 Jan 1990

5120-14-357-4320
Socket Wrench

143574320
7237CLEDE7MM: RNCC: 3 | RNVC: 2
XCELITE99-7MM: RNCC: 5 | RNVC: 9

7 Jun 1979

5120-14-441-2144
Cant Hook

144412144
332A93-3410-20: RNCC: 3 | RNVC: 2

22 Aug 1990

5120-14-302-4837
Drill Drift

143024837
3130S95-47-005: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-479-0345
Aligning Punch

144790345
888-359-800-1: RNCC: 3 | RNVC: 2

6 Dec 1995

5120-14-264-3219
Hand Rivet Set

142643219
13-11-6: RNCC: 2 | RNVC: 2

1 Jan 1970

5120-14-369-6088
Box Wrench

143696088
NO PRIMARY REF14-369-6088: RNCC: 3 | RNVC: 2
BL47725: RNCC: 5 | RNVC: 9
85-690-1426: RNCC: 6 | RNVC: 9

17 Apr 1981

5120-14-378-6895
Drift Pin Set

143786895
TF10A27306: RNCC: 3 | RNVC: 2
85-691-7669: RNCC: 6 | RNVC: 9

11 Aug 1982

5120-14-452-2549
Box Wrench

144522549
62-19-32X25-32: RNCC: 3 | RNVC: 2
62.19/32X25/32: RNCC: 5 | RNVC: 2

8 Jan 1992

5120-14-249-3931
Mechanical Puller

142493931
3210-95-34-020: RNCC: 3 | RNVC: 2
08-310: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-458-4091
Seal Inserter

144584091
0XB501-322-801-03: RNCC: 3 | RNVC: 2

23 Oct 1992

5120-14-424-6342
Mechanical Puller

144246342
8815851000: RNCC: 3 | RNVC: 2

2 Jun 1988

5120-14-442-6808
Mechanical Puller

144426808
OUT8731: RNCC: 3 | RNVC: 2
0UT8731: RNCC: 5 | RNVC: 2

24 Oct 1990

5120-14-383-0900
Driftpin

143830900
9970-125-952: RNCC: 3 | RNVC: 2

17 Mar 1983

5120-14-481-6034
Mechanical Puller

144816034
NO PRIMARY REF14-481-6034: RNCC: 3 | RNVC: 2
807630: RNCC: 5 | RNVC: 9

16 May 1996

5120-14-215-1287
Driftpin

142151287
3130S95-73-001: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-466-5880
Mechanical Puller

144665880
851-400-034-0: RNCC: 3 | RNVC: 2

17 Nov 1993

5120-14-378-1242
Socket Wrench

143781242
2310-03585: RNCC: 3 | RNVC: 2

20 Jul 1982

5120-14-420-9705
Rack Bar Jack

144209705
596361L: RNCC: 3 | RNVC: 2
91584388: RNCC: 5 | RNVC: 2

6 Jan 1988

5120-14-532-7098
Hand Hammer

145327098
207A.25.CB: RNCC: 3 | RNVC: 2
0180659K00: RNCC: 5 | RNVC: 2

4 Dec 2002

5120-14-279-0609
Box Wrench Set

142790609
62JE12: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-539-7135
Socket Wrench

145397135
26-676: RNCC: 3 | RNVC: 2

3 Feb 2004

5120-14-429-9778
C Clamp

144299778
449-40: RNCC: 3 | RNVC: 2
3272670283909: RNCC: 5 | RNVC: 2

22 Feb 1989

5120-14-274-8505
Socket Wrench

142748505
80-24: RNCC: 3 | RNVC: 2
3107224: RNCC: 3 | RNVC: 2
122-24: RNCC: 3 | RNVC: 9
VIR3107224: RNCC: 5 | RNVC: 9
DEM122-24: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-443-5598
Open End Box Wrench

144435598
851-115-023-0: RNCC: 3 | RNVC: 2

28 Nov 1990

5120-14-254-8044
Ratchet Wrench

142548044
4141-38: RNCC: 3 | RNVC: 9

1 Jan 1969

5120-14-274-3158
Drive Pin Punch

142743158
L988-147: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-202-5577
Hand Melting Ladle

142025577
1367: RNCC: 3 | RNVC: 2
2709B180: RNCC: 5 | RNVC: 9

1 Jan 1963

5120-14-480-2029
Hand Vise Jaw

144802029
M4HZ7101966220: RNCC: 3 | RNVC: 2

28 Feb 1996

5120-14-466-3769
Aligning Punch

144663769
Q46747: RNCC: 3 | RNVC: 2

3 Nov 1993

5120-14-200-3033
Box Wrench

142003033
100-9X11: RNCC: 3 | RNVC: 2

1 Jan 1962

5120-14-311-1683
Socket Wrench

143111683
76.30: RNCC: 3 | RNVC: 2
2695 612 630: RNCC: 5 | RNVC: 2
181/243/6: RNCC: 5 | RNVC: 2
3148511210208: RNCC: 5 | RNVC: 2
76-30: RNCC: 5 | RNVC: 2
190221: RNCC: 5 | RNVC: 2
250-5456: RNCC: 5 | RNVC: 2
FACOM76.30: RNCC: 5 | RNVC: 9
0121020: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-204-9170
Socket Wrench

142049170
NO PRIMARY REF14-204-9170: RNCC: 3 | RNVC: 2
FIG260-19: RNCC: 5 | RNVC: 9

1 Jan 1963

5120-14-304-4475
Box Wrench

143044475
20-711-19: RNCC: 3 | RNVC: 2
207-11-19: RNCC: 5 | RNVC: 2

1 Jan 1974

5120-14-216-4616
Socket Wrench

142164616
433-64: RNCC: 3 | RNVC: 2
571018: RNCC: 5 | RNVC: 2
CHANCE433: RNCC: 5 | RNVC: 2
A622-3: RNCC: 5 | RNVC: 2
433: RNCC: 5 | RNVC: 2

1 Jan 1965

5120-14-413-3190
Box Wrench

144133190
50.98-3'7/8: RNCC: 3 | RNVC: 2
50-98-3'7/8: RNCC: 5 | RNVC: 2
3148511072400: RNCC: 5 | RNVC: 2
50-98: RNCC: 5 | RNVC: 9
0107240: RNCC: 5 | RNVC: 9

26 Nov 1986

5120-14-329-3601
Mechanical Puller

143293601
NO PRIMARY REF14-329-3601: RNCC: 3 | RNVC: 2
97501-78-97510-78: RNCC: 5 | RNVC: 9

2 Jul 1975

5120-14-530-2099
Box Wrench Set

145302099
57.JE5: RNCC: 3 | RNVC: 2
3148515312205: RNCC: 5 | RNVC: 2

22 May 2002

5120-14-510-0975
Box Wrench

145100975
MN528: RNCC: 3 | RNVC: 2
5120AA8004429: RNCC: 6 | RNVC: 9

4 Nov 1998

5120-14-552-0466
Socket Wrench

145520466
99C.12: RNCC: 3 | RNVC: 2
00.39.89.12: RNCC: 5 | RNVC: 2

22 Nov 2006

5120-14-537-7222
Screwdriver Bit Set

145377222
147M135: RNCC: 3 | RNVC: 2
2607000212: RNCC: 5 | RNVC: 2
AA011648: RNCC: 6 | RNVC: 9

19 Nov 2003

5120-14-555-3639
Ratchet Wrench

145553639
64.6X7: RNCC: 3 | RNVC: 2
742451: RNCC: 3 | RNVC: 2
3148517424517: RNCC: 5 | RNVC: 2

31 Oct 2007

5120-14-459-3273
Hand Roller

144593273
TB10512: RNCC: 3 | RNVC: 2

25 Nov 1992

5120-14-297-1123
Mechanical Puller

142971123
1039-761A500: RNCC: 3 | RNVC: 2
1039-761: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-426-8442
Socket Wrench

144268442
0411-60196: RNCC: 3 | RNVC: 2

23 Sep 1988

5120-14-541-0216
Hand Hammer

145410216
0400280201: RNCC: 3 | RNVC: 2
3303800400306: RNCC: 5 | RNVC: 2

5 May 2004

5120-14-226-6559
Socket Wrench

142266559
910032007: RNCC: 3 | RNVC: 9
T284: RNCC: 5 | RNVC: 9

1 Jan 1966

5120-14-379-9578
Socket Wrench

143799578
3-18491: RNCC: 3 | RNVC: 2

20 Oct 1982

5120-14-284-9912
Open End Box Wrench

142849912
43.12X14: RNCC: 3 | RNVC: 2
43-12X14: RNCC: 3 | RNVC: 2
0102160: RNCC: 5 | RNVC: 2
3148511021606: RNCC: 5 | RNVC: 2
102106: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-298-7857
Hand Hammer

142987857
NO PRIMARY REF14-298-7857: RNCC: 3 | RNVC: 2
4703: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-407-6237
Box Wrench

144076237
54A.30: RNCC: 3 | RNVC: 2
109-30: RNCC: 3 | RNVC: 2
3148511106105: RNCC: 5 | RNVC: 2
3272670229938: RNCC: 5 | RNVC: 2
0110610: RNCC: 5 | RNVC: 9
54-30: RNCC: 5 | RNVC: 9

27 Feb 1986

5120-14-437-4046
Aligning Punch

144374046
NO PRIMARY REF14-437-4046: RNCC: 3 | RNVC: 2
758-010-14: RNCC: 5 | RNVC: 9

31 Jan 1990

5120-14-532-0098
Nutdriver

145320098
8041143B00: RNCC: 3 | RNVC: 2

9 Oct 2002

5120-14-414-5643
Tacker

144145643
661 TR: RNCC: 3 | RNVC: 2
2629: RNCC: 5 | RNVC: 9

11 Feb 1987

5120-14-201-3089
Socket Wrench

142013089
R613-30-14: RNCC: 2 | RNVC: 2

1 Jan 1962

5120-14-530-6460
Mechanical Puller

145306460
F27110000: RNCC: 3 | RNVC: 2

1 Jul 2002

5120-14-507-6752
Drive Pin Punch

145076752
466747: RNCC: 3 | RNVC: 2

11 Aug 1998

5120-14-342-1954
Aligning Punch

143421954
ST107M213-2P235B: RNCC: 3 | RNVC: 2
ST107M213-2P235A: RNCC: 5 | RNVC: 2
ST107M213P235: RNCC: 5 | RNVC: 2

14 Apr 1977

5120-14-316-5630
Mechanical Puller

143165630
3210-97-31-130: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-332-0162
Fuse Puller

143320162
NO PRIMARY REF14-332-0162: RNCC: 3 | RNVC: 2
0882110: RNCC: 5 | RNVC: 9
90192: RNCC: 5 | RNVC: 9
SYQ0079: RNCC: 5 | RNVC: 9

2 Jul 1975

5120-14-380-6776
Plier Clamp

143806776
P4C: RNCC: 3 | RNVC: 9
P4C: RNCC: 5 | RNVC: 2

29 Nov 1982

5120-14-454-0089
Seal Inserter

144540089
09P1116: RNCC: 3 | RNVC: 2

19 Mar 1992

5120-14-403-3719
Ratchet Wrench

144033719
24C9139: RNCC: 3 | RNVC: 2

21 Aug 1985

5120-14-381-1571
Marlinespike

143811571
883-1: RNCC: 3 | RNVC: 2

25 Jan 1983

5120-14-546-6795
Mechanical Puller

145466795
TM2332G001: RNCC: 3 | RNVC: 2

1 Aug 2005

5120-14-478-5979
Mechanical Puller

144785979
MEY072-01: RNCC: 3 | RNVC: 2

8 Nov 1995

5120-14-488-7820
Mechanical Puller

144887820
3272-180-000: RNCC: 3 | RNVC: 2
3272-180-000: RNCC: 5 | RNVC: 2

4 Jun 1997

5120-14-317-0389
Mechanical Puller

143170389
RT4903: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-428-5223
Driftpin

144285223
AXE05000165101: RNCC: 3 | RNVC: 2

8 Dec 1988

5120-14-505-9378
Mechanical Puller

145059378
H117142: RNCC: 3 | RNVC: 2

30 Mar 1998

5120-14-356-5641
Socket Wrench

143565641
93-13: RNCC: 3 | RNVC: 2
3272670239760: RNCC: 5 | RNVC: 2

15 May 1979

5120-14-481-4761
Jaw Cable Grip

144814761
J00790-03-2035P002: RNCC: 3 | RNVC: 2

8 May 1996

5120-14-287-8289
Crowbar

142878289
4790-3M: RNCC: 3 | RNVC: 9

1 Jan 1972

5120-14-316-8378
Lamp Extractor

143168378
TD739P8: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-395-3429
Woodworker's Vise

143953429
G20HS: RNCC: 3 | RNVC: 2

2 Oct 1984

5120-14-472-4413
Mechanical Puller

144724413
22334120-1: RNCC: 3 | RNVC: 2
SG-AX275: RNCC: 5 | RNVC: 2

25 Oct 1994

5120-14-040-2923
Mechanical Puller

140402923
RT7809: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-514-2612
Mechanical Puller

145142612
U306G2: RNCC: 3 | RNVC: 2

5 May 1999

5120-14-388-9216
Mechanical Puller

143889216
8813867000: RNCC: 3 | RNVC: 2

29 Nov 1983

5120-14-530-2100
Box Wrench

145302100
DM.23: RNCC: 3 | RNVC: 2

22 May 2002

5120-14-399-1297
Hand Hydraulic Jack

143991297
0056633215: RNCC: 3 | RNVC: 2

6 Mar 1985

5120-14-200-9858
Trowel

142009858
E75506-140: RNCC: 2 | RNVC: 2
2004-140: RNCC: 3 | RNVC: 2
E75113A140: RNCC: 5 | RNVC: 2
2695 942 014: RNCC: 5 | RNVC: 2

1 Jan 1962

5120-14-235-6978
Box Wrench

142356978
100 3-8X7-16: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-335-6849
Claw Bar

143356849
415-1250: RNCC: 3 | RNVC: 2

30 Jun 1976

5120-14-377-1822
Box Wrench

143771822
223602: RNCC: 3 | RNVC: 2
058070: RNCC: 5 | RNVC: 2
00058070: RNCC: 5 | RNVC: 2

17 May 1982

5120-14-455-2698
Machinist's Vise

144552698
E01090: RNCC: 3 | RNVC: 2
SAME01090: RNCC: 5 | RNVC: 9

21 May 1992

5120-14-453-2224
Mechanical Puller

144532224
60MS036: RNCC: 3 | RNVC: 2

11 Feb 1992

5120-14-427-1120
Mechanical Puller

144271120
530534: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-483-1305
Drill Guide

144831305
3101E24-2710-21: RNCC: 3 | RNVC: 2

13 Aug 1996

5120-14-228-7846
Gasoline Blowtorch

142287846
3952-26: RNCC: 3 | RNVC: 9
2921-26: RNCC: 5 | RNVC: 9

1 Jan 1966

5120-14-350-5348
Socket Wrench

143505348
006-502-014: RNCC: 3 | RNVC: 2

12 Jul 1978

5120-14-224-7454
Socket Wrench

142247454
0117230: RNCC: 3 | RNVC: 2
72-21: RNCC: 5 | RNVC: 2
72.21: RNCC: 5 | RNVC: 2

1 Jan 1966

5120-14-393-4289
Socket Wrench Set

143934289
K.415E: RNCC: 3 | RNVC: 2
0506940: RNCC: 5 | RNVC: 2
3148515069406: RNCC: 5 | RNVC: 2
K415E: RNCC: 5 | RNVC: 2
91634365: RNCC: 5 | RNVC: 2

7 Apr 1984

5120-14-436-4733
Hand Beading Tool

144364733
853-600-161-0: RNCC: 3 | RNVC: 2

3 Jan 1990

5120-14-321-5762
Mechanical Puller

143215762
DLT095666: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-202-2894
Blacksmiths' Tongs

142022894
M0B34-600: RNCC: 3 | RNVC: 2

1 Jan 1963

5120-14-364-9204
Driftpin

143649204
321A96-0009-01: RNCC: 3 | RNVC: 2
85-691-1866: RNCC: 6 | RNVC: 9

2 Sep 1980

5120-14-356-5957
Mechanical Puller

143565957
TF10A32410: RNCC: 3 | RNVC: 2
85-688-6560: RNCC: 6 | RNVC: 9

15 May 1979

5120-14-283-9579
Drive Pin Punch

142839579
9970-115-367: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-032-0977
Mechanical Puller

140320977
341A98-2036-01: RNCC: 3 | RNVC: 2

5 Jul 1980

5120-14-354-9001
Mechanical Puller

143549001
D47698: RNCC: 3 | RNVC: 2

20 Feb 1979

5120-14-446-4020
Open End Box Wrench

144464020
73943: RNCC: 3 | RNVC: 2

19 Mar 1991

5120-14-480-1646
Hand Tube Bender

144801646
344A.12: RNCC: 3 | RNVC: 2
1715 122 012: RNCC: 5 | RNVC: 2
0168081: RNCC: 5 | RNVC: 2
3148511680810: RNCC: 5 | RNVC: 2

22 Feb 1996

5120-14-432-7202
Seal Inserter

144327202
OUT50137: RNCC: 3 | RNVC: 2
0UT50137: RNCC: 5 | RNVC: 2

21 Jun 1989

5120-14-305-9365
Socket Wrench

143059365
VTR400-1143: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-414-9621
Screw Extractor

144149621
285F1: RNCC: 3 | RNVC: 2
3148511652008: RNCC: 5 | RNVC: 2
FACOM 285-F1: RNCC: 5 | RNVC: 2
958 283 000 001: RNCC: 6 | RNVC: 9

26 Mar 1987

5120-14-391-7801
Lamp Cap Extractor

143917801
NSA933684-01: RNCC: 1 | RNVC: 2
0UT83: RNCC: 3 | RNVC: 2
OUT83: RNCC: 5 | RNVC: 2
NSA933684-01: RNCC: 5 | RNVC: 2

21 Mar 1984

5120-14-357-9945
Open End Box Wrench

143579945
MHA301-25: RNCC: 3 | RNVC: 2
MHA301-25: RNCC: 5 | RNVC: 2

20 Jul 1979

5120-14-522-3801
Mechanical Puller

145223801
TC3057G001: RNCC: 3 | RNVC: 2

25 Oct 2000

5120-14-442-9528
Seal Inserter

144429528
RBT: RNCC: 3 | RNVC: 2
91605020: RNCC: 5 | RNVC: 2
ZINRBT: RNCC: 5 | RNVC: 9

7 Nov 1990

5120-14-370-2301
Mechanical Puller

143702301
8810493000: RNCC: 3 | RNVC: 2

18 May 1981

5120-14-439-6219
Mechanical Puller

144396219
6801G32-2080-00: RNCC: 3 | RNVC: 2

16 May 1990

5120-14-447-9990
Seal Inserter

144479990
A37650Y: RNCC: 3 | RNVC: 2

12 Jun 1991

5120-14-366-5340
Driftpin

143665340
3CGF106S22: RNCC: 3 | RNVC: 2

20 Nov 1980

5120-14-300-9506
Hand Screw Jack

143009506
341A91-0056-00: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-514-2609
Ratchet Wrench

145142609
S382V: RNCC: 3 | RNVC: 2
S.382V: RNCC: 5 | RNVC: 2

5 May 1999

5120-14-550-2195
Box Wrench

145502195
1949-3-4-7-8: RNCC: 3 | RNVC: 2

12 Jun 2006

5120-14-391-6576
Socket Wrench Set

143916576
75.JE16: RNCC: 3 | RNVC: 2
3148515322006: RNCC: 5 | RNVC: 2
75JE16: RNCC: 5 | RNVC: 2
2695 606 16: RNCC: 5 | RNVC: 2
0532200: RNCC: 5 | RNVC: 9

21 Mar 1984

5120-14-529-8321
C Clamp

145298321
50060973: RNCC: 3 | RNVC: 2

16 Apr 2002

5120-14-425-9464
Aligning Punch

144259464
TH20E1-5A3: RNCC: 3 | RNVC: 2

28 Jul 1988

5120-14-410-3677
Box Wrench

144103677
54A.46: RNCC: 3 | RNVC: 2
3148511106303: RNCC: 5 | RNVC: 2
0110630: RNCC: 5 | RNVC: 9
54-46: RNCC: 5 | RNVC: 9

18 Jun 1986

5120-14-433-6858
Lamp Cap Extractor

144336858
332A93-3610-20: RNCC: 3 | RNVC: 2
F300 0T 009 9436: RNCC: 5 | RNVC: 9

2 Aug 1989

5120-14-484-4324
Socket Wrench

144844324
888-418-400-1: RNCC: 3 | RNVC: 2

14 Nov 1996

5120-14-032-0978
Seal Inserter

140320978
341A98-2048-00: RNCC: 3 | RNVC: 2

5 Jul 1980

5120-14-546-0404
Catch Lever Tool

145460404
45271225: RNCC: 3 | RNVC: 2

7 Jun 2005

5120-14-553-1571
Hand Shovel

145531571
771M4: RNCC: 3 | RNVC: 2

7 Mar 2007

5120-14-366-8457
Driftpin

143668457
30MS087-802G: RNCC: 3 | RNVC: 2

20 Nov 1980

5120-14-449-2348
Socket Wrench

144492348
9138: RNCC: 3 | RNVC: 9

7 Aug 1991

5120-14-531-8651
Socket Wrench

145318651
77A.PL2: RNCC: 3 | RNVC: 2
3148511214343: RNCC: 5 | RNVC: 2

24 Sep 2002

5120-14-524-4934
Mechanical Puller

145244934
F26643000: RNCC: 3 | RNVC: 2

21 Mar 2001

5120-14-526-2106
Aligning Punch

145262106
304 745: RNCC: 3 | RNVC: 2

11 Jul 2001

5120-14-434-7774
Seal Inserter

144347774
EM403-712-608A: RNCC: 3 | RNVC: 2
EM403-712-608A: RNCC: 5 | RNVC: 9

4 Oct 1989

5120-14-361-8684
Mechanical Puller

143618684
MGB093-26: RNCC: 3 | RNVC: 2
MGB093-26: RNCC: 5 | RNVC: 2

20 Feb 1980

5120-14-448-6403
Socket Wrench

144486403
W-1945: RNCC: 3 | RNVC: 9
101 100-42: RNCC: 3 | RNVC: 9

4 Jul 1991

5120-14-479-6297
Mechanical Puller

144796297
888-361-900-1: RNCC: 3 | RNVC: 2

24 Jan 1996

5120-14-525-9415
Socket Wrench

145259415
888-401-900-1: RNCC: 3 | RNVC: 2

20 Jun 2001

5120-14-516-9037
Machinist's Scriber

145169037
DELA.1589.00: RNCC: 3 | RNVC: 2
DELA1589-00: RNCC: 5 | RNVC: 2

20 Oct 1999

5120-14-533-1412
Seal Inserter

145331412
888-452-006-0: RNCC: 3 | RNVC: 2

23 Jan 2003

5120-14-385-3362
Mechanical Puller

143853362
365A93-3343-00: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-441-2331
Mechanical Puller

144412331
6808G32-1000-00: RNCC: 3 | RNVC: 2

22 Aug 1990

5120-14-421-3548
Mechanical Puller

144213548
541320: RNCC: 3 | RNVC: 2

14 Jan 1988

5120-14-401-4809
Hand Rivet Set

144014809
291015-05: RNCC: 3 | RNVC: 2

5 Jun 1985

5120-14-468-6218
Lamp Extractor

144686218
0UT162: RNCC: 3 | RNVC: 2
OUT162: RNCC: 5 | RNVC: 2
85-695-1870: RNCC: 6 | RNVC: 9

9 Mar 1994

5120-14-527-7161
Mechanical Puller

145277161
888-491-900-1: RNCC: 3 | RNVC: 2

14 Nov 2001

5120-14-514-3854
Open End Box Wrench

145143854
ENFD29468-14X17: RNCC: 3 | RNVC: 2

19 May 1999

5120-14-201-6805
Pipe Vise

142016805
NO PRIMARY REF14-201-6805: RNCC: 3 | RNVC: 2
0522: RNCC: 5 | RNVC: 9

1 Jan 1962

5120-14-324-4719
Mechanical Puller

143244719
330A93-3410-01: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-540-8411
Woodworker's Vise

145408411
KT5-1: RNCC: 3 | RNVC: 2

23 Apr 2004

5120-14-434-9969
Hand Hammer

144349969
200A.28: RNCC: 3 | RNVC: 2
200A28: RNCC: 5 | RNVC: 2
0183854N00: RNCC: 5 | RNVC: 2
91630125: RNCC: 5 | RNVC: 2
3148511462409: RNCC: 5 | RNVC: 2
2695 502 030: RNCC: 5 | RNVC: 2
0146240: RNCC: 5 | RNVC: 9

11 Oct 1989

5120-14-387-2781
Hand Hydraulic Jack

143872781
639100428: RNCC: 3 | RNVC: 2
639100428: RNCC: 5 | RNVC: 9

15 Sep 1983

5120-14-468-5203
Mechanical Puller

144685203
PD1D: RNCC: 3 | RNVC: 2
91729336: RNCC: 5 | RNVC: 2

3 Mar 1994

5120-14-443-9359
Box Wrench

144439359
GS102-06: RNCC: 3 | RNVC: 2

13 Dec 1990

5120-14-230-8262
Pinch Bar

142308262
0334600601: RNCC: 3 | RNVC: 2
M0B334-600: RNCC: 5 | RNVC: 2
91616444: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-386-6785
Mechanical Puller

143866785
853-100-265-0: RNCC: 3 | RNVC: 2
853-121-003-0: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-506-7427
Box Wrench

145067427
58.10X11: RNCC: 3 | RNVC: 2
58-10X11: RNCC: 3 | RNVC: 2
3148511137208: RNCC: 5 | RNVC: 2
0113720: RNCC: 5 | RNVC: 9

13 May 1998

5120-14-424-9006
Aligning Punch

144249006
9970-126-386: RNCC: 3 | RNVC: 2

9 Jun 1988

5120-14-519-0701
Hand Screw Jack

145190701
470751: RNCC: 3 | RNVC: 2

7 Mar 2000

5120-14-476-5742
Socket Wrench

144765742
0003-5737: RNCC: 3 | RNVC: 2
89302698: RNCC: 5 | RNVC: 2

21 Jun 1995

5120-14-504-6879
Socket Wrench Set

145046879
S.431DP: RNCC: 3 | RNVC: 2
3148515164057: RNCC: 5 | RNVC: 2
0965 13 230: RNCC: 5 | RNVC: 2
S-431DP: RNCC: 5 | RNVC: 9

27 Feb 1998

5120-14-393-8806
Seal Inserter

143938806
NO PRIMARY REF14-393-8806: RNCC: 3 | RNVC: 2
0U139369: RNCC: 5 | RNVC: 9
OU139369: RNCC: 5 | RNVC: 9

23 Jun 1984

5120-14-380-6778
Tack Claw

143806778
415-1000: RNCC: 3 | RNVC: 2

29 Nov 1982

5120-14-318-2591
Machinist's Scriber

143182591
NO PRIMARY REF14-318-2591: RNCC: 3 | RNVC: 2
0154600: RNCC: 5 | RNVC: 2
233: RNCC: 5 | RNVC: 2
91453718: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-368-2865
Mechanical Puller

143682865
NO PRIMARY REF14-368-2865: RNCC: 3 | RNVC: 2
345-72233-1: RNCC: 5 | RNVC: 9

20 Feb 1981

5120-14-214-1381
Mechanical Puller

142141381
8810003066: RNCC: 3 | RNVC: 2
8810546500: RNCC: 5 | RNVC: 2
6-000-313: RNCC: 5 | RNVC: 2
881-0-003-066: RNCC: 5 | RNVC: 2

1 Jan 1965

5120-14-527-8244
Seal Inserter

145278244
888-518-400-2: RNCC: 3 | RNVC: 2
888-518-400-1: RNCC: 5 | RNVC: 2

21 Nov 2001

5120-14-521-5302
Plier Wrench

145215302
504A.100: RNCC: 3 | RNVC: 2
0714 09 22: RNCC: 5 | RNVC: 2

9 Aug 2000

5120-14-373-4542
Mechanical Puller

143734542
DLP700500: RNCC: 3 | RNVC: 2

21 Oct 1981

5120-14-421-9330
Wood Mallet

144219330
A820X: RNCC: 3 | RNVC: 2

10 Feb 1988

5120-14-303-0572
Box Wrench

143030572
105N10X11: RNCC: 3 | RNVC: 2
55.10X11: RNCC: 3 | RNVC: 2
111-10X11: RNCC: 3 | RNVC: 9
55-10X11: RNCC: 5 | RNVC: 2
3148511108802: RNCC: 5 | RNVC: 2
0713 305 101: RNCC: 5 | RNVC: 2
0110880: RNCC: 5 | RNVC: 9
DEM111-10X11: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-399-7374
Wire Pike

143997374
20212689: RNCC: 3 | RNVC: 2
20212689: RNCC: 5 | RNVC: 2

14 Mar 1985

5120-14-480-2030
Hand Vise Jaw

144802030
M4HZ7101966221: RNCC: 3 | RNVC: 2

28 Feb 1996

Load More Results