What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.

A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Blacksmith's Punch?

A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Mechanical Finger?

A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.

A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Screwdriver And Wrench Assembly?

A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Stakeholder Bench Plate?

A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.

What is a Drill Drift?

A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.

A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Digging Bar?

A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

What is a Valve Spring Lifter?

A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.

What is a Fuse Puller?

A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.

Hand Tools, Nonedged, Nonpowered - France (FR)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by France (FR) - NCB is 14

Page 14 of 110

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by France

51	20	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - France (FR)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 16 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Pipe Vise? 19 Items: A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.
What is a Hand Vise? 25 Items: A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.
What is a Hand Hydraulic Jack? 133 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 153 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 903 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 17 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
Swage,Bottom,Blacksmith's 10 Items
What is a Hand Tube Flaring Tool? 23 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Blacksmith's Punch? 12 Items: A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.
What is a Drain Plug Wrench? 45 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 57 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 16 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 3829 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
Flatter,Blacksmith's 18 Items
Swage,Top,Blacksmith's 12 Items
What is a Pipe Wrench? 110 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 149 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 53 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
Screwdriver,Offset 54 Items
What is a Screwdriver Bit? 707 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Mechanical Finger? 25 Items: A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.
What is a Socket Wrench Socket? 1803 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 1412 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 1641 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 52 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 565 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
Jack,Push-Pull,Screw 30 Items
What is a Hand Tube Bender? 54 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 1106 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 55 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pinch Bar? 19 Items: A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.
What is a Pry Bar? 17 Items: A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.
What is a Wrecking Bar? 15 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 273 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 413 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 32 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 295 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
Face,Hammer,Inserted 25 Items
What is a Hole Sheet Metal Holder? 37 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Screwdriver And Wrench Assembly? 11 Items: A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.
What is a Hand Rivet Set? 121 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Stakeholder Bench Plate? 22 Items: A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.
What is a Drill Drift? 32 Items: A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.
What is a Tack Claw? 15 Items: A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.
Mattock 28 Items
What is a Socket Wrench Handle Bar? 108 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Stake,Sheet Metalworking 50 Items
Riveter,Blind,Hand 76 Items
What is a Hand Shovel? 43 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 98 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 30 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
What is a Digging Bar? 20 Items: A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.
Block,Dolly,Sheet Metalworking 56 Items
What is a Piston Ring Compressor? 34 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Valve Spring Lifter? 29 Items: A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.
What is a Fuse Puller? 20 Items: A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.
What is a Hand Lead Seal Press? 18 Items: A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.
What is a Hand Beading Tool? 91 Items: A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.
What is a Hand Hammer? 502 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
Head,Hand Hammer 81 Items
What is a Lamp Extractor? 76 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Tube Packing Ring Installing Tool? 29 Items: A Tube Packing Ring Installing Tool (INSTALLING TOOL,TUBE PACKING RING) is an item designed to insert packing rings on tubes within tube sheets on condensers and similar heat exchangers. In operation, the packing rings are assembled on the loading pin mandrel and are then transferred from the mandrel on to the tube by means of a tubular sleeve which slides on the mandrel.
What is a Carpenters' Pincers? 18 Items: A Carpenters' Pincers (PINCERS,CARPENTERS') is a plierlike hand tool having two opposing jaws which may have hammerlike backs. One handle has a nail or tack pulling claw, the other is shaped to form a screwdriver. The tool may contain a wire cutter. See also NIPPERS, END CUTTING and PINCERS, FARRIERS'.
What is a Trowel? 33 Items: A Trowel is a tool used for bricklaying, concrete work, plastering, linoleum laying, and masonry work. Excludes CORNER TOOL, CONCRETE.
What is a Hand Abrasive Wheel Dresser? 12 Items: A Hand Abrasive Wheel Dresser (DRESSER,ABRASIVE WHEEL,HAND) is a tool designed to remove glaze from, dress, shape, sharpen, and true solid abrasive wheels. Excludes NIB, DIAMOND, WHEEL DRESSING.
What is a Lamp Cap Extractor? 32 Items: A Lamp Cap Extractor (EXTRACTOR,LAMP CAP) is a tool specifically designed to facilitate the removal of lamp caps from switchboards, panels or indicator lamps.
What is a Rivet Bucking Bar? 51 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 86 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 277 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Woven Cable Grip? 23 Items: A Woven Cable Grip (GRIP,CABLE,WOVEN) is a braided wire device designed to clutch a bare or insulated conductor, cable or wire rope, for holding taut or drawing through conduit.
What is a Screw Thread Insert Extractor? 19 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is an Electron Tube Extractor? 18 Items: An Electron Tube Extractor (EXTRACTOR,ELECTRON TUBE) is a hand tool designed to facilitate the removal of electron tubes from electronic equipment and to avoid burning the fingers. It may be used for installing tubes.
What is a Cross Tip Screwdriver? 362 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 21 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 11 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 37 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Tool Handle Wedge? 10 Items: A Tool Handle Wedge (WEDGE,TOOL HANDLE) is excludes WEDGE, WOOD.
What is a Marlinespike? 16 Items: A Marlinespike is a metal hand tool made in the shape of a tapered pin. One end is pointed and the opposite end may be headed. The body may contain an eye for a lanyard sling, or be grooved lengthwise. Excludes CABLE PICK and FID.
What is an Aligning Punch? 272 Items: An Aligning Punch (PUNCH,ALIGNING) is a round, square, hexagonal or octagonal bodied hand tool, having a round tapered section 6-1/2 inches (165.1 mm) or more in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, DRIFT and DRIFTPIN.
What is a Drift Punch? 25 Items: A Drift Punch (PUNCH,DRIFT) is a round, square, hexagonal, or octagonal bodied hand tool, having a round tapered section 4 to 6 inches (101.6 mm to 152.4 mm) inclusive in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, ALIGNING; and DRIFTPIN.
What is a Putty Knife? 36 Items: A Putty Knife (KNIFE,PUTTY) is a hand tool with a nonedged blade fixed to a handle for laying on and smoothing putty and the like.
What is a Socket Wrench Adapter-Extension? 40 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 30 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 184 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Socket Wrench Ratchet Attachment? 47 Items: A Socket Wrench Ratchet Attachment (RATCHET ATTACHMENT,SOCKET WRENCH) is a connection for socket wrenches and handles. Consists of a ratcheting mechanism with an internal drive on one end and an external drive on the opposite end of the same size. The item is designed to permit continuous rotation of the socket in one direction without removing the socket or handle and without a complete rotation of the handle.
What is a Wrench Extension Handle? 81 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Socket Wrench Crowfoot Attachment? 155 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 33 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 43 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 48 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 2394 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 372 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 300 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 661 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 32 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand-Operated Grommet And Eyelet Press? 12 Items: A Hand-Operated Grommet And Eyelet Press (PRESS,GROMMET AND EYELET,HAND-OPERATED) is a device which punches or pierces holes and in addition fastens or sets eyelets and grommets in cloth, paper and similar material. May be used for fastening or setting rivets, lacing hooks and snaps in cloth, paper and similar material. It is hand operated by lever or screw action. See also PUNCH, EYELET, PLIER TYPE and PRESS, GROMMET AND EYELET, FOOT OPERATED.
What is a Claw Bar? 19 Items: A Claw Bar (BAR,CLAW) is before using, refer to Reference Drawing Group AG.
What is a Shock Type Wheel Stud Nut Wrench? 11 Items: A Shock Type Wheel Stud Nut Wrench (WRENCH,WHEEL STUD NUT,SHOCK TYPE) is a manually operated item designed to remove wheel stud nuts. In operation the inner nut is turned by a socket attached to a shaft on which is a loose swinging weighted handle. The weighted handle may be swung quickly to provide an impact force against the socket to loosen the seized or jammed nuts. The outer nut is held stationary by a separate hexagonal holding wrench.
What is a Drift Pin Set? 30 Items: A Drift Pin Set is a group of DRIFTPIN having different characteristics.
What is a Tire Iron? 25 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 115 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Blacksmith's Vise? 14 Items: A Blacksmith's Vise (VISE,BLACKSMITH'S) is a clamping device consisting of a mounting plate, one stationary and one manual screw actuated jaw and a supporting member extending downward from the stationary jaw to the floor. Designed to be mounted on a bench, table or the like. May include pipe holding jaws.
What is a Machinist's Vise? 64 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Clamp Base Bench Vise? 10 Items: A Clamp Base Bench Vise (VISE,BENCH,CLAMP BASE) is a clamping device consisting of a base, one stationary and one manual screw actuated jaw, and one or more guide bars or rods. Designed with an integral clamp for attaching to a bench, table, or the like. Does not include pipe holding jaws.
What is a Fixed Open End Wrench Set? 86 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Nail Set? 11 Items: A Nail Set is a round knurled, square, hexagonal or octagonal bodied hand tool having a round tapered section terminating in a cupped point. It is designed to set brad head nails below the surface by striking it a hammerlike blow. See also PUNCH, DRIVE PIN.
What is a Socket Wrench Set? 202 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is an Open End Box Wrench Set? 10 Items: An Open End Box Wrench Set (WRENCH SET,OPEN END BOX) is a group of WRENCH, OPEN END BOX having different characteristics.
What is a Combination Box And Open End Wrench Set? 72 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Box Wrench Set? 36 Items: A Box Wrench Set (WRENCH SET,BOX) is a group of box wrenches having different characteristics. It may include a HANDLE, EXTENSION WRENCH. See also WRENCH SET, COMBINATION, BOX AND OPEN END.
What is a Hot Line Stick? 26 Items: A Hot Line Stick is a hand tool consisting of a straight, round stick (pole) made of a suitable nonconductive material with a tool fixed to one end. The other end may be plain or have a butt mounting device fixed to it. Various types of attachments (hooks, rings, and bands) may be fixed to the body. It is designed for use in the repair and maintenance of live high voltage aerial lines. Excludes hot line sticks without heads.
Handle,Mattock-Pick 15 Items
What is a Wrench Kit? 73 Items: A Wrench Kit is an assortment of various types and sizes of wrenches such as SOCKET, SOCKET WRENCH; WRENCH, OPEN END, FIXED; WRENCH, BOX and the like. It may include adapter(s), ratchet(s) and the like. See also WRENCH SET (as modified.
What is a Brad Awl? 15 Items: A Brad Awl (AWL,BRAD) is a small, pointed tool used by shoemakers, saddlers, cabinetmakers, and the like for piercing small holes in wood, leather, and similar materials, and consists of a handle with a ferrule and a blade. The blade is round, terminating in a beveled, sharp straight edge and has a shank which passes through the center of the handle.
What is a Scratch Awl? 20 Items: A Scratch Awl (AWL,SCRATCH) is an item whose nominal length of blade is less than 4 inches (101.6 millimeters) and is provided with a nondetachable handle.
What is a Screw Extractor Set? 10 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 102 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
Jack,Scissors,Hand 26 Items
What is a Piston Ring Expander? 23 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
Mallet,Plastic 62 Items
Mallet,Rubber 10 Items
What is a Wood Mallet? 37 Items: A Wood Mallet (MALLET,WOOD) is excludes MALLET, CALKING; MALLET, HAWSING and MALLET, SERVING.
What is a Rack Bar Jack? 30 Items: A Rack Bar Jack (JACK,RACK BAR) is excludes JACK, BUMPER and JACK, REEL, HAND.
What is a Pneumatic Tire Valve Core Inserter And Remover? 14 Items: A Pneumatic Tire Valve Core Inserter And Remover (INSERTER AND REMOVER,PNEUMATIC TIRE VALVE CORE) is a bar of steel having a small cylindrical slotted end for removing or installing a valve core in a valve stem by a screwing motion. See also REPAIR TOOL, PNEUMATIC TIRE VALVE.
What is a Hand Tube Swaging Tool Kit? 20 Items: A Hand Tube Swaging Tool Kit (SWAGING TOOL KIT,TUBE,HAND) is a hand-operated noncutting tool consisting of one or more PUNCH, TUBE SWAGING, HAND and a tube flaring bar.
What is a Hand Tube Flaring Punch? 11 Items: A Hand Tube Flaring Punch (PUNCH,TUBE FLARING,HAND) is a noncutting tool having a shaped end or section designed to flare the ends of tubes. One type is designed to flare the ends of tubes against a tube sheet, and another to flare tube ends to mate with tube fittings. Includes punch components of FLARING TOOL, TUBE, HAND.
What is a Hose Strap Band Clamping Tool? 26 Items: A Hose Strap Band Clamping Tool (CLAMPING TOOL,STRAP BAND,HOSE) is an item designed to tension and lock metal straps around a rubber hose, and the like. It is also used to clamp and hold fittings therein.
What is a Mechanical Puller? 3073 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 470 Items
What is a Slip Joint Pliers? 84 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Brake Repair Pliers? 14 Items: A Brake Repair Pliers (PLIERS,BRAKE REPAIR) is a tool having jaws designed for use in brake repair operations, such as removing and replacing items such as keys, springs, and the like. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 226 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 12 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 81 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 56 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 15 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 11 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 29 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Cross Tip Screwdriver Set? 14 Items: A Cross Tip Screwdriver Set (SCREWDRIVER SET,CROSS TIP) is a group of SCREWDRIVER, CROSS TIP having different characteristics.
What is a Spanner Wrench Set? 18 Items: A Spanner Wrench Set (WRENCH SET,SPANNER) is a group of items under WRENCH, SPANNER having different characteristics.
What is a Drive Pin Punch Set? 31 Items: A Drive Pin Punch Set (PUNCH SET,DRIVE PIN) is a group of PUNCH, DRIVE PIN having different characteristics.
What is an Aligning Punch Set? 13 Items: An Aligning Punch Set (PUNCH SET,ALIGNING) is a group of PUNCH, ALIGNING having different characteristics. See also DRIFTPIN SET.
What is a Slugging Type Box Wrench Socket? 16 Items: A Slugging Type Box Wrench Socket (SOCKET,SLUGGING TYPE BOX WRENCH) is an item having a hexagonal external drive at one end, made to fit into the internal hexagonal or 12-point opening of a slugging type box wrench. The opposite end has a single-broached hexagonal opening of the same size as the external drive. The item is designed with extra thick walls to withstand the impact of sledge blows on the driving wrench.
What is a Mechanical Puller Step Plate? 44 Items: A Mechanical Puller Step Plate (STEP PLATE,MECHANICAL PULLER) is a circular disk, flanged to provide a shoulder, and designed to provide a base for the screw point of a PULLER, MECHANICAL when pulling externally mounted bearings, gears, and the like from hollow shafts or housings. It has a concentric, countersunk hole to accommodate the puller screw point.
What is a Solid Center Punch? 79 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Cable Type Ratchet Lever Puller? 20 Items: A Cable Type Ratchet Lever Puller (PULLER,RATCHET LEVER,CABLE TYPE) is an item consisting of a metal frame and ratchet lever reel to which is attached one end of a flexible cable (wire rope). The cable feeds through the fast eye in the metal frame, and may be reeved through a slip hook tackle hook. See also BINDER, LOAD; HOIST, WIRE ROPE and STRETCHER, WIRE.
What is an Electronic Equipment Tuning Wand? 18 Items: An Electronic Equipment Tuning Wand (TUNING WAND,ELECTRONIC EQUIPMENT) is a hand-held rod used in determining the adjustment of the windings of a radio frequency coil. It is made of insulating material with iron on one end and brass on the other end. By inserting the iron end in the coil, the inductance is increased and by inserting the brass end, the inductance is decreased.
What is a Combination Open End And Spanner Wrench? 14 Items: A Combination Open End And Spanner Wrench (WRENCH,OPEN END AND SPANNER,COMBINATION) is a tool having open end wrench characteristics at one end and spanner wrench features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s) at the other end.
What is a Detent Handling Tool? 187 Items: A Detent Handling Tool (HANDLING TOOL,DETENT) is a specially designed handling tool consisting of a rigid bar with a T-handle on one end. The other end is equipped with threads designed to mate the threads of a detent to facilitate inserting or extracting.
What is a Hand Material Handling Hook? 23 Items: A Hand Material Handling Hook (HOOK,MATERIAL HANDLING,HAND) is a hook whose curved end conforms to Style AP1, AP2, AP3 or AP4 of Reference Drawing Group AP. Excludes HOOK, MANHOLE COVER, HAND; HOOK, WIRE BREAKING, HAND; HOOK, ROCK CRUSHER FEEDING, HAND; HOOK, STRAINER REMOVING, HAND and HOOKS, BAG HANDLING, HAND.
What is a Magnetic Retrieving Tool? 11 Items: A Magnetic Retrieving Tool (RETRIEVING TOOL,MAGNETIC) is a hand-operated magnetic device used to locate and pick up metallic articles, such as bolts, nuts, pins, washers, and the like, in confined spaces. It may be rigid, flexible or adjustable. Excludes FINGER, MECHANICAL.
What is a Mechanical Puller Adapter? 78 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Combination Box And Open End Box Wrench? 13 Items: A Combination Box And Open End Box Wrench (WRENCH,BOX AND OPEN END BOX,COMBINATION) is a double end wrench, box and open end box, primarily designed for removing or replacing tube fittings. The opening in the open end box may be machined at an angle from the longitudinal center line of the wrench.
What is a Screw Thread Insert Inserter? 136 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Flat Tip Screwdriver Set? 48 Items: A Flat Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP) is a group of SCREWDRIVER, FLAT TIP having different characteristics.
What is a Terminal Crimping Tool Contact Positioner? 89 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 16 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is an Adjustable Wrench? 138 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 239 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 75 Items
Handle,Shovel 10 Items
What is a Socket Wrench Spanner Attachment? 88 Items: A Socket Wrench Spanner Attachment (SPANNER ATTACHMENT,SOCKET WRENCH) is an item having an adjustable or fixed span with pin, hook, or key type end that is used to fit and turn various size retaining rings, cover plates, plugs, couplings, and like parts. Usually designed to be driven by a male driver.
What is a Retaining Ring Installation Tool? 44 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Tacker? 16 Items: A Tacker is a hand-operated, hammerlike or gunlike item without a clincher, used to drive preformed connecting elements like pins, nails or staples through one object or piece of material into another. Excludes STAPLER (as modified).
What is a Bearing And Bushing Inserter? 290 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 207 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 939 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 14 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 93 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 161 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 94 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 141 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 53 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Six Point Tip Screwdriver? 155 Items: A Six Point Tip Screwdriver (SCREWDRIVER,SIX POINT TIP) is a manual screwdriver having a single nonremoveable blade having a tip with six rounded points.
What is a Seal Inserter And Remover? 147 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 478 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is a Preformed Packing Inserter And Remover? 34 Items: A Preformed Packing Inserter And Remover (INSERTER AND REMOVER,PREFORMED PACKING) is a hand tool designed to install and remove a PACKING, PREFORMED.
What is a Pin Remover? 34 Items: A Pin Remover (REMOVER,PIN) is a hand tool designed to facilitate the removal of a pin from a hole.
What is a Pin Inserter And Remover? 13 Items: A Pin Inserter And Remover (INSERTER AND REMOVER,PIN) is a rodlike tool designed to facilitate the insertion and removal of a pin from a hole.
What is an Electrical Contact Inserter And Remover? 37 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Piston Inserter? 40 Items: A Piston Inserter (INSERTER,PISTON) is a tool designed to permit installation of a piston or piston assembly without damaging the packings or piston.
What is a Spring Inserter And Remover? 85 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 13 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Stud Inserter? 22 Items: A Stud Inserter (INSERTER,STUD) is a device designed to drive in studs. It does not have any facilities for removing or extracting studs. See also INSERTER AND REMOVER, STUD.
What is a Stud Inserter And Remover? 17 Items: A Stud Inserter And Remover (INSERTER AND REMOVER,STUD) is a group of items designed to extract and to drive studs. It may include collets, guides, housings, holders and the like. See also REMOVER SET, STUD and INSERTER, STUD.
What is a Gear Inserter? 54 Items: A Gear Inserter (INSERTER,GEAR) is a hand tool designed to install various gears onto a gearshaft. It may be operated by a pushing or a striking force.
What is a Crimping Tool Die? 73 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is an Electrical Connector Inserter? 45 Items: An Electrical Connector Inserter (INSERTER,ELECTRICAL CONNECTOR) is a hand tool designed to hold an electrical connector, and to assist in the positioning and installation of the connector on a cover, panel or the like.
What is a Float? 12 Items: A Float is a tool used for concrete, plastering and grouting work.
What is a Mechanical Puller Set? 19 Items: A Mechanical Puller Set (PULLER SET,MECHANICAL) is two or more separate PULLER, MECHANICAL of different fixed sizes.
What is a Lifting Pneumatic Bag? 11 Items: A Lifting Pneumatic Bag (PNEUMATIC BAG,LIFTING) is a device made of flexible material designed to lift another item by being placed under the item and being inflated with air or some other gas. It will have a means of being connected to an air or gas source and may include a connector hose, a control valve and/or a pressure regulator.
What is a Cable Tie Installation Tool? 22 Items: A Cable Tie Installation Tool (INSTALLATION TOOL,CABLE TIE) is a lightweight, hand-held, hand-operated tool designed to fasten cable ties, straps and the like. Cable tie is inserted into the nose of the tool flush to the cable tie head. Trigger handle tightens cable tie and cuts off any excess. These installation tools are available in a variety of sizes depending on their intended use with miniature, intermediate, standard, heavy or extra heavy cross section ties.
What is a Bearing Staking Installation Tool? 159 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
Wrench Set,Ratchet 15 Items
What is a Sealant Dispenser? 26 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Retaining Ring Pliers Set? 10 Items: A Retaining Ring Pliers Set (PLIERS SET,RETAINING RING) is a group of PLIERS, RETAINING RING having different characteristics.
What is a Hand Armament Subsystem Carrier? 52 Items: A Hand Armament Subsystem Carrier (CARRIER,ARMAMENT SUBSYSTEM,HAND) is a metallic item with a clamp device and/or space for depositing articles. It is used for transporting weapon parts during maintanence and/or repair work, such as gun barrel, automatic loader, breechblock and the like.
What is a Ring Retaining Pliers Tip Set? 13 Items: A Ring Retaining Pliers Tip Set (TIP SET,PLIERS,RING RETAINING) is a collection of removable metallic tips in matched pairs used to provide various size capablities to PLIERS, RING RETAINING which permits the removal and installation of internal and external retaining rings.
What is a Plug Electrical Connector Extractor? 45 Items: A Plug Electrical Connector Extractor (EXTRACTOR,ELECTRICAL CONNECTOR,PLUG) is a hand tool designed to disassemble CONNECTOR, PLUG, ELECTRICAL from a CONNECTOR, RECEPTACLE, ELECTRICAL.
What is a Torque Wrench Adapter Set? 10 Items: A Torque Wrench Adapter Set (ADAPTER SET,TORQUE WRENCH) is tWO or more ADAPTER, TORQUE WRENCH of different sizes.
What is an Electronic Component Inserter And Remover? 79 Items: An Electronic Component Inserter And Remover (INSERTER AND REMOVER,ELECTRONIC COMPONENT) is an item which can insert or remove an electronic component package such as MICROCIRCUIT; RESISTOR, NETWORK (as modified); and the like from its mounting position or socket. Excludes INSERTER AND REMOVER, ELECTRICAL CONTACT; REMOVER, ELECTRICAL CONTACT; EXTRACTOR, ELECTRICAL CARD; EXTRACTOR, ELECTRONIC CRYSTAL UNIT; EXTRACTOR, ELECTRON TUBE.
What is an Impact Type Bit Set And Handle Screwdriver? 14 Items: An Impact Type Bit Set And Handle Screwdriver (SCREWDRIVER,BIT SET AND HANDLE,IMPACT TYPE) is an item consisting of a set of screwdriver bits and a impact driver to accommodate the bits of various types and characteristics. It is designed to transmit a strong rotating movement by the impact of a hammer blowed on the impact driver. It is used to loosen rusted or seized screws. Excludes SCREWDRIVER, BIT SET AND HANDLE.
What is a Hand Vise Jaw? 19 Items: A Hand Vise Jaw (JAW,VISE,HAND) is an item consisting of two opposing parts of a VISE, HAND. The item is moveable and able to open and close. It can hold, grasp or clamp work.
What is a Screwdriver Handle? 28 Items: A Screwdriver Handle (HANDLE,SCREWDRIVER) is an item used to accommodate various types of BIT, SCREWDRIVER. It is designed to rotate a bit that is used for installing or removing screws.
What is a Wire Twister Pliers? 25 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 284 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is a Mechanical Puller Body? 45 Items: A Mechanical Puller Body (BODY,PULLER,MECHANICAL) is an item designed to support and enclose the internal parts of a PULLER,MECHANICAL.
What is a Flat Tip And Cross Tip Screwdriver Set? 39 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is a Socket Wrench Screwdriver Attachment Set? 22 Items: A Socket Wrench Screwdriver Attachment Set (SCREWDRIVER ATTACHMENT SET,SOCKET WRENCH) is a set of screwdriver attachment, socket wrench of different sizes. Items consist of a female square drive on one end to attach to a handle, socket wrench and various screwdriver tip configurations on the opposite end. Excludes SCREWDRIVER ATTACHMENT,SOCKET WRENCH
What is an Oil Filter Wrench? 44 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 430 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Communications Equipment Spring Adjuster? 13 Items: A Communications Equipment Spring Adjuster (ADJUSTER,SPRING,COMMUNICATIONS EQUIPMENT) is a single or double end tool, equipped with slot(s) of various dimensions or with cylindrical rod(s), used for adjusting the springs or spring tensioned parts of electronic equipment.
What is a Rotating Members Aligning Tool? 32 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
What is a Final Drive Assembly Alignment Pin? 41 Items: A Final Drive Assembly Alignment Pin (ALIGNMENT PIN,FINAL DRIVE ASSEMBLY) is a special designed pin used in the assembling of the final drive.
Arm,Handling Tool 77 Items
What is a Splicing Sleeve Compressing Tool? 23 Items: A Splicing Sleeve Compressing Tool (COMPRESSING TOOL,SPLICING SLEEVE) is a hand tool having hinged leverage handles similar to a CUTTER, BOLT or pliers, designed to compress a splicing sleeve when joining the ends of two conductors, or when forming an eye splice in the end of a wire rope. Excludes CRIMPING TOOL, TERMINAL, HAND.
What is a Hand Screw Jack Extension? 14 Items: A Hand Screw Jack Extension (EXTENSION,HAND SCREW JACK) is a length of externally threaded rigid shafting which is the adjustable section of a JACK, SCREW, HAND.
What is a Mechanical Puller Gear Adapter? 21 Items: A Mechanical Puller Gear Adapter (GEAR ADAPTER,PULLER,MECHANICAL) is an adapter that adapts a PULLER,MECHANICAL, to pull a certain gear.
Handle,Hydraulic Jack 18 Items
What is a Female Electrical Contact Resizing Tool? 11 Items: A Female Electrical Contact Resizing Tool (RESIZING TOOL,FEMALE ELECTRICAL CONTACT) is a tool designed to shape to a specific size, female contacts such as those used on electrical connectors, tube sockets, crystal sockets, and pin jacks.
What is a Screwdriver And Socket Wrench Combination? 13 Items: A Screwdriver And Socket Wrench Combination is a hand-tool formed into an integral unit with a socket wrench at one end and a screwdriver bit at the other end. See also SCREWDRIVER AND WRENCH ASSEMBLY.
What is a Hand Hose Fitting Swaging Tool Kit? 11 Items: A Hand Hose Fitting Swaging Tool Kit (SWAGING TOOL KIT,HOSE FITTING,HAND) is a device, hydraulically actuated by hand or power operated pump, consisting of face plate, adapter plate, finger cages, fingers, ram, bushing, and expanding mandrels combined on a single base in various functional arrangements. It is used for swaging the outside diameter of hose assembly fittings, expanding the inside diameter of hose assemblies, and securing the fabrication of hose assemblies. Included are a hand or power operated pump, lubricant, cases, and trays.
What is a Catch Lever Tool? 12 Items: A Catch Lever Tool (LEVER TOOL,CATCH) is a specially designed hand tool which engages the opening and closing lever of a CATCH (as modified) for ease of operation. It is constructed of thin rigid material, usually flat, and one end has an engaging tongue.
What is a Manual Impact Wrench? 11 Items: A Manual Impact Wrench (WRENCH,IMPACT,MANUAL) is a manually operated handheld tool consisting of spring-loaded handle and a power-impact head which delivers a torsional impact from either continuous movement of the handle in one direction, or by a reciprocating action. It is used in tightening and loosening fasteners, such as bolts, nuts, and the like. The item may include sockets, extensions and offset fittings, nut runners, and the like.
What is a Drift? 63 Items: A Drift is an item consisting of a tubular body fitted with replaceable tips. It is designed to insert or remove mechanical components where space is restricted.
What is a Nutdriver? 46 Items: A Nutdriver is a non-powered hand tool with a screwdriver style handle, shaft and formed female hex or square socket at driving end.
What is a Locking Device Removal Tool? 12 Items: A Locking Device Removal Tool (REMOVAL TOOL,LOCKING DEVICE) is a hand tool designed to facilitate the removal of a WASHER, KEY and a LOCKING PLATE, NUT AND BOLT.
What is a Hydraulic Fitting Crimping Tool Head? 26 Items: A Hydraulic Fitting Crimping Tool Head (HEAD,CRIMPING TOOL,HYDRAULIC FITTING) is a component of a crimping tool used to compress fittings on fluid tubes. It consists of a U-shape item, in which, are mounted different sizes of DIE, CRIMPING TOOL for tubes of various diameters.
What is a Torque Screwdriver? 11 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.
What is a Special Purpose Combination Wrench? 13 Items: A Special Purpose Combination Wrench (WRENCH,COMBINATION,SPECIAL PURPOSE) is a tool having a combination of ends and facets. The ends may have open end, box or spanner characteristics. The sides may have features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s). Designed to fit specific items, not sized as standard or metric.
What is a Screwdriver Bit Holder? 56 Items: A Screwdriver Bit Holder (HOLDER,SCREWDRIVER BIT) is an attachment with a socket end for accepting male hexagon shank insert bits and a drive end for adapting to a portable power or hand tool.
What is a Telescoping Pole? 16 Items: A Telescoping Pole (POLE,TELESCOPING) is an item which is designed to be extended or compressed by the sliding of overlapping sections. This item may or may not be able to accommodate an extension.

Stock Items From Supply Class 5120 Page 14 of 110

5120-14-469-9033
Box Wrench

144699033
55.9VSE: RNCC: 3 | RNVC: 2
3148511123393: RNCC: 5 | RNVC: 2
0112339: RNCC: 5 | RNVC: 9

18 May 1994

5120-14-284-9914
Box Wrench Set

142849914
55.JE8T: RNCC: 3 | RNVC: 2
65JE8T: RNCC: 5 | RNVC: 2
3148515306006: RNCC: 5 | RNVC: 2
0530600: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-465-4654
Seal Inserter

144654654
851-500-078-0: RNCC: 3 | RNVC: 2

30 Sep 1993

5120-14-475-9547
Mechanical Puller

144759547
885131: RNCC: 3 | RNVC: 2
885131: RNCC: 5 | RNVC: 9

15 May 1995

5120-14-283-6558
Screw Extractor

142836558
903-2: RNCC: 3 | RNVC: 2
2787-2: RNCC: 3 | RNVC: 2
649-5: RNCC: 3 | RNVC: 9
DEM649-5: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-360-4946
Ratchet Wrench

143604946
KN30-6-12X175: RNCC: 3 | RNVC: 2
KN30-6-12X175: RNCC: 5 | RNVC: 9

23 Nov 1979

5120-14-553-5418
Seal Inserter

145535418
00329825- OUT 07-03-100/1: RNCC: 3 | RNVC: 2

16 Apr 2007

5120-14-520-7054
Hand Rivet Set

145207054
AT105A-3-32AN470: RNCC: 3 | RNVC: 2

5 Jun 2000

5120-14-400-3590
Driftpin

144003590
353981: RNCC: 3 | RNVC: 2
353981: RNCC: 5 | RNVC: 9

24 Apr 1985

5120-14-235-6191
Box Wrench

142356191
17926T1REP5: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-269-3605
Hand Vise

142693605
NO PRIMARY REF14-269-3605: RNCC: 3 | RNVC: 2
3604: RNCC: 5 | RNVC: 9

1 Jan 1970

5120-14-458-4263
Gear Inserter

144584263
851-500-225-0: RNCC: 3 | RNVC: 2

23 Oct 1992

5120-14-527-9152
Seal Inserter

145279152
888-481-500-1: RNCC: 3 | RNVC: 2

28 Nov 2001

5120-14-432-7079
Seal Inserter

144327079
OUT11821-16: RNCC: 3 | RNVC: 2
0UT11821-16: RNCC: 5 | RNVC: 2

21 Jun 1989

5120-14-550-2194
Box Wrench

145502194
1949-1-1-1-8: RNCC: 3 | RNVC: 2

12 Jun 2006

5120-14-432-7071
Seal Inserter

144327071
OUT11817-2: RNCC: 3 | RNVC: 2
0UT11817-2: RNCC: 5 | RNVC: 2

21 Jun 1989

5120-14-469-9064
Socket Wrench

144699064
72.11VSE: RNCC: 3 | RNVC: 2
3148511167830: RNCC: 5 | RNVC: 2
0116810: RNCC: 5 | RNVC: 9

18 May 1994

5120-14-202-5578
Putty Knife

142025578
9413-4: RNCC: 3 | RNVC: 2
413-4: RNCC: 5 | RNVC: 2
2106: RNCC: 5 | RNVC: 2
0695 940 904: RNCC: 5 | RNVC: 2

1 Jan 1963

5120-14-465-7638
Seal Inserter

144657638
851-750-123-0: RNCC: 3 | RNVC: 2

14 Oct 1993

5120-14-486-2192
Drive Pin Punch Set

144862192
249.GJ7: RNCC: 3 | RNVC: 2
249GJ7: RNCC: 5 | RNVC: 2
3148515389184: RNCC: 5 | RNVC: 2
0538918: RNCC: 5 | RNVC: 9

5 Mar 1997

5120-14-528-0691
Seal Inserter

145280691
888-479-400-1: RNCC: 3 | RNVC: 2

12 Dec 2001

5120-14-364-4095
Socket Wrench

143644095
UHN232-43: RNCC: 3 | RNVC: 2
MHN232-43: RNCC: 5 | RNVC: 2

7 Aug 1980

5120-14-428-8838
Mechanical Puller

144288838
350A93-3223-00: RNCC: 3 | RNVC: 2

22 Dec 1988

5120-14-204-9171
Socket Wrench

142049171
NO PRIMARY REF14-204-9171: RNCC: 3 | RNVC: 2
FIG260-23: RNCC: 5 | RNVC: 9

1 Jan 1963

5120-14-308-7827
Hand Hammer

143087827
1-36 E.C.: RNCC: 3 | RNVC: 2
1-630 E.C.: RNCC: 5 | RNVC: 2
3891-36: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-244-6563
Drill Drift

142446563
3255-5: RNCC: 3 | RNVC: 9
162-04-5: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-502-2882
Socket Wrench

145022882
74E.3/16X75: RNCC: 3 | RNVC: 2
119155: RNCC: 5 | RNVC: 2
3148511191552: RNCC: 5 | RNVC: 2
0119155: RNCC: 5 | RNVC: 9

8 Dec 1997

5120-14-441-2104
Mechanical Puller

144412104
332A93-3215-0081: RNCC: 3 | RNVC: 2

22 Aug 1990

5120-14-343-9654
Open End Box Wrench

143439654
37 1-2X9-16: RNCC: 3 | RNVC: 2
85-647-3280: RNCC: 6 | RNVC: 9

13 Jul 1977

5120-14-473-2407
Mechanical Puller

144732407
332A93-3105-01: RNCC: 3 | RNVC: 2

7 Dec 1994

5120-14-464-9062
Hand Beading Tool

144649062
851-919-042-0: RNCC: 3 | RNVC: 2

8 Sep 1993

5120-14-289-1350
Box Wrench

142891350
113-27X29: RNCC: 3 | RNVC: 9
DEM113-27X29: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-328-4714
Open End Box Wrench

143284714
GSM196-010F59: RNCC: 3 | RNVC: 2
GSM196-10F59: RNCC: 5 | RNVC: 2

2 Jul 1975

5120-14-406-9516
Box Wrench

144069516
853-100-193-0: RNCC: 3 | RNVC: 2

22 Jan 1986

5120-14-436-4714
Mechanical Puller

144364714
853-203-042-0: RNCC: 3 | RNVC: 2

3 Jan 1990

5120-14-454-8164
Friction Igniter

144548164
0613.0103: RNCC: 3 | RNVC: 2
SAF0613.0103: RNCC: 5 | RNVC: 9
0613-0103: RNCC: 6 | RNVC: 9

22 Apr 1992

5120-14-365-8674
Socket Wrench

143658674
76.31: RNCC: 3 | RNVC: 2
76-31: RNCC: 5 | RNVC: 2
3148511210307: RNCC: 5 | RNVC: 2
0121030: RNCC: 5 | RNVC: 9

8 Oct 1980

5120-14-244-6716
Mechanical Puller

142446716
41984: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-519-0512
Wood Mallet

145190512
4160: RNCC: 3 | RNVC: 9

3 Mar 2000

5120-14-497-8146
Mechanical Puller

144978146
1X56 137 281: RNCC: 3 | RNVC: 2
1X56 137 281: RNCC: 5 | RNVC: 2

20 Oct 1997

5120-14-453-3529
Hand Tube Bender

144533529
344A.18: RNCC: 3 | RNVC: 2
3148511680957: RNCC: 5 | RNVC: 2
344A.18: RNCC: 5 | RNVC: 2
0168095: RNCC: 5 | RNVC: 9

18 Feb 1992

5120-14-406-5828
Mechanical Puller

144065828
853-201-182-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-534-5167
Mechanical Puller

145345167
6401ECC80103: RNCC: 3 | RNVC: 2

26 Mar 2003

5120-14-554-4029
Mechanical Puller

145544029
M21740: RNCC: 3 | RNVC: 2

2 Jul 2007

5120-14-309-6463
Paint Strainer

143096463
X11501A17LZ4: RNCC: 2 | RNVC: 2

1 Jan 1974

5120-14-338-9020
Mechanical Puller

143389020
8811981000: RNCC: 3 | RNVC: 2
7M141K: RNCC: 3 | RNVC: 2

17 Dec 1976

5120-14-483-5866
Seal Inserter

144835866
0U144276: RNCC: 3 | RNVC: 2
0U144276: RNCC: 5 | RNVC: 2
0U144276: RNCC: 5 | RNVC: 9

19 Sep 1996

5120-14-281-7592
Mechanical Puller

142817592
A125828: RNCC: 3 | RNVC: 2
100149: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-380-6775
Plier Clamp

143806775
P3C: RNCC: 3 | RNVC: 9
P3C: RNCC: 5 | RNVC: 2

29 Nov 1982

5120-14-551-9681
Drill Guide

145519681
5600691871: RNCC: 3 | RNVC: 2

14 Nov 2006

5120-14-381-0073
Ratchet Wrench

143810073
HB41-6/FAB49: RNCC: 3 | RNVC: 2
HB41-6: RNCC: 5 | RNVC: 2

14 Dec 1982

5120-14-277-3162
Drive Pin Punch

142773162
NO PRIMARY REF14-277-3162: RNCC: 3 | RNVC: 2
251-3-5: RNCC: 5 | RNVC: 2
251.3,5: RNCC: 5 | RNVC: 2
6-35: RNCC: 5 | RNVC: 2
130005: RNCC: 5 | RNVC: 2
0160100: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-527-8176
Mechanical Puller

145278176
888-499-300-1: RNCC: 3 | RNVC: 2

21 Nov 2001

5120-14-274-8511
Socket Wrench

142748511
80-36: RNCC: 3 | RNVC: 2
3107236: RNCC: 3 | RNVC: 2
122-36: RNCC: 3 | RNVC: 9
DEM122-36: RNCC: 5 | RNVC: 9
VIR3107236: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-210-9836
Socket Wrench

142109836
80-35P: RNCC: 3 | RNVC: 2
3107235: RNCC: 3 | RNVC: 2
122-35: RNCC: 3 | RNVC: 9
SYQ0748: RNCC: 5 | RNVC: 2
80-35: RNCC: 5 | RNVC: 2
DEM122-35: RNCC: 5 | RNVC: 9
VIR3107235: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-508-2421
Pipe Wrench

145082421
TO/C.131.140.03: RNCC: 3 | RNVC: 2

2 Sep 1998

5120-14-484-4305
Mechanical Puller

144844305
888-379-700-2: RNCC: 3 | RNVC: 2

14 Nov 1996

5120-14-360-6452
Mechanical Puller

143606452
8810546300: RNCC: 3 | RNVC: 2

19 Dec 1979

5120-14-364-7970
Box Wrench

143647970
210006: RNCC: 3 | RNVC: 2

2 Sep 1980

5120-14-434-3270
Seal Inserter

144343270
EMH141378P: RNCC: 3 | RNVC: 2
EMH141378P: RNCC: 5 | RNVC: 9

20 Sep 1989

5120-14-256-2269
Box Wrench

142562269
100-32X33: RNCC: 3 | RNVC: 2

1 Jan 1969

5120-14-441-2131
Mechanical Puller

144412131
332A93-3230-00: RNCC: 3 | RNVC: 2

22 Aug 1990

5120-14-466-5864
Socket Wrench

144665864
8814164003: RNCC: 3 | RNVC: 2
85-695-1622: RNCC: 6 | RNVC: 9

17 Nov 1993

5120-14-523-4188
Paint Strainer

145234188
167-026: RNCC: 3 | RNVC: 2

19 Jan 2001

5120-14-359-7546
Brake Repair Pliers

143597546
102239: RNCC: 3 | RNVC: 2
100011: RNCC: 5 | RNVC: 2
A117715: RNCC: 5 | RNVC: 2

15 Oct 1979

5120-14-530-6386
Seal Inserter

145306386
D47692R1: RNCC: 3 | RNVC: 2

1 Jul 2002

5120-14-315-7943
Mechanical Puller

143157943
TM108109: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-410-3466
Mechanical Puller

144103466
8814214000: RNCC: 3 | RNVC: 2

18 Jun 1986

5120-14-365-9728
Mechanical Puller

143659728
366A93-3200-00: RNCC: 3 | RNVC: 2

4 Nov 1980

5120-14-474-7494
Seal Inserter

144747494
45057142: RNCC: 3 | RNVC: 2
45057142: RNCC: 5 | RNVC: 9

1 Mar 1995

5120-14-250-8361
Mechanical Puller

142508361
202502: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-433-3042
Aligning Punch

144333042
853-202-280-0: RNCC: 3 | RNVC: 2

19 Jul 1989

5120-14-212-2220
Trowel

142122220
E75502-220: RNCC: 2 | RNVC: 2
E75-502-200: RNCC: 5 | RNVC: 2
2695 940 022: RNCC: 5 | RNVC: 2

1 Jan 1964

5120-14-325-0253
Mechanical Puller

143250253
0S20527: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-460-5577
Mechanical Puller

144605577
239484J: RNCC: 3 | RNVC: 2

29 Jan 1993

5120-14-434-9968
Plastic Mallet

144349968
208A.40AB: RNCC: 3 | RNVC: 2
3148511476826: RNCC: 5 | RNVC: 2
0536360: RNCC: 5 | RNVC: 9
208-40AB: RNCC: 5 | RNVC: 9
0147682: RNCC: 5 | RNVC: 9

11 Oct 1989

5120-14-431-2677
Mechanical Puller

144312677
3160S95-13-010: RNCC: 3 | RNVC: 2

12 Apr 1989

5120-14-391-8583
Mechanical Puller

143918583
70353779: RNCC: 3 | RNVC: 2
70353779: RNCC: 5 | RNVC: 9

21 Mar 1984

5120-14-295-1784
Drive Pin Punch

142951784
000641005P: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-274-8319
Marlinespike

142748319
14-16ACIER20: RNCC: 2 | RNVC: 2

1 Jan 1971

5120-14-543-0386
Box Wrench

145430386
6514POC: RNCC: 3 | RNVC: 2

18 Aug 2004

5120-14-306-4353
Socket Wrench

143064353
8811484001: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-516-8032
Mechanical Puller

145168032
5001008709: RNCC: 3 | RNVC: 2

18 Oct 1999

5120-14-343-7856
Mechanical Puller

143437856
M31-123: RNCC: 3 | RNVC: 2
603GAT82-042: RNCC: 3 | RNVC: 2
M31123: RNCC: 5 | RNVC: 2
M31-123: RNCC: 5 | RNVC: 9

13 Jul 1977

5120-14-488-8662
Plastic Mallet

144888662
207A.60BB: RNCC: 3 | RNVC: 2
3148511474648: RNCC: 5 | RNVC: 2
0535540: RNCC: 5 | RNVC: 9

10 Jun 1997

5120-14-249-9415
Box Wrench

142499415
62-38X42: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-531-3715
Plastic Mallet

145313715
208A.60: RNCC: 3 | RNVC: 2
3148511477601: RNCC: 5 | RNVC: 2

13 Aug 2002

5120-14-552-8203
Plier Clamp

145528203
517.6: RNCC: 3 | RNVC: 2
3148511821060: RNCC: 5 | RNVC: 2

5 Feb 2007

5120-14-536-5282
Bench And Pipe Vise

145365282
1222.100E: RNCC: 3 | RNVC: 2
3148512257226: RNCC: 5 | RNVC: 2

28 Aug 2003

5120-14-317-1848
Socket Wrench

143171848
1722: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-274-8045
Hammer Handle

142748045
B54522-33U600: RNCC: 2 | RNVC: 2
2-2: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-364-6360
Hand Rivet Set

143646360
067224: RNCC: 3 | RNVC: 2
XG3-32CH: RNCC: 5 | RNVC: 2

2 Sep 1980

5120-14-331-5592
Socket Wrench

143315592
75.27: RNCC: 3 | RNVC: 2
3148511198100: RNCC: 5 | RNVC: 2
75-27: RNCC: 5 | RNVC: 2
250-5620: RNCC: 5 | RNVC: 2
2695 606 627: RNCC: 5 | RNVC: 2
0119810: RNCC: 5 | RNVC: 9
FACOM75.27: RNCC: 5 | RNVC: 9

2 Jul 1975

5120-14-327-4917
Box Wrench

143274917
50-117: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-205-5129
Road Rake

142055129
NO PRIMARY REF14-205-5129: RNCC: 3 | RNVC: 2
205: RNCC: 5 | RNVC: 2

1 Jan 1964

5120-14-204-8976
Gasoline Blowtorch

142048976
789: RNCC: 3 | RNVC: 2

1 Jan 1963

5120-14-447-3838
C Clamp

144473838
NO PRIMARY REF14-447-3838: RNCC: 3 | RNVC: 2
0162750: RNCC: 5 | RNVC: 2
271-80L: RNCC: 5 | RNVC: 2
271.80L: RNCC: 5 | RNVC: 2
91712156: RNCC: 5 | RNVC: 2

15 May 1991

5120-14-545-6299
Mechanical Puller

145456299
0587432: RNCC: 3 | RNVC: 2

26 Apr 2005

5120-14-525-5091
Box Wrench

145255091
5000261549: RNCC: 3 | RNVC: 2

6 Jun 2001

5120-14-274-8320
Marlinespike

142748320
14-16ACIER25: RNCC: 2 | RNVC: 2

1 Jan 1971

5120-14-457-9827
Socket Wrench

144579827
600193: RNCC: 3 | RNVC: 2

2 Oct 1992

5120-14-464-2477
Mechanical Puller

144642477
854-500-390-0: RNCC: 3 | RNVC: 2

28 Jul 1993

5120-14-322-5415
Box Wrench

143225415
50.45: RNCC: 3 | RNVC: 2
3148511067109: RNCC: 5 | RNVC: 2
50-45: RNCC: 5 | RNVC: 2
0106710: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-526-9193
Mechanical Puller

145269193
8816918000: RNCC: 3 | RNVC: 2

17 Sep 2001

5120-14-416-4132
Mechanical Puller

144164132
37395: RNCC: 3 | RNVC: 2

10 Jun 1987

5120-14-388-9218
Mechanical Puller

143889218
8813905000: RNCC: 3 | RNVC: 2

29 Nov 1983

5120-14-555-5955
Hand Hydraulic Jack

145555955
9070-21-00: RNCC: 3 | RNVC: 2

29 Nov 2007

5120-14-306-9018
Mechanical Puller

143069018
8811426000: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-476-7523
Socket Wrench

144767523
B.10R10A: RNCC: 3 | RNVC: 2
0715 51 55: RNCC: 5 | RNVC: 2
3148510136141: RNCC: 5 | RNVC: 2
B.10R10: RNCC: 5 | RNVC: 2
0013410: RNCC: 5 | RNVC: 9
B.10R1: RNCC: 5 | RNVC: 9

28 Jun 1995

5120-14-515-6861
Socket Wrench

145156861
14857: RNCC: 3 | RNVC: 2

23 Jul 1999

5120-14-471-7062
Open End Box Wrench

144717062
70A.7/8: RNCC: 3 | RNVC: 2
3148511167175: RNCC: 5 | RNVC: 2
0116717: RNCC: 5 | RNVC: 9

13 Sep 1994

5120-14-452-6603
Mechanical Puller

144526603
OU25577: RNCC: 3 | RNVC: 2
0U25577: RNCC: 5 | RNVC: 2

15 Jan 1992

5120-14-516-9267
Screw Extractor

145169267
41.46L: RNCC: 3 | RNVC: 2
41.46L: RNCC: 5 | RNVC: 2
AA018010: RNCC: 6 | RNVC: 9

27 Oct 1999

5120-14-264-1585
Socket Wrench Set

142641585
K422N: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-504-8943
Hand Hydraulic Jack

145048943
YS5-15/D1781: RNCC: 3 | RNVC: 2
YS5-15: RNCC: 5 | RNVC: 2
RAQ0283: RNCC: 5 | RNVC: 2
YS5-15: RNCC: 5 | RNVC: 2

10 Mar 1998

5120-14-413-3180
Box Wrench

144133180
50.79-3'1/8: RNCC: 3 | RNVC: 2
3148511070505: RNCC: 5 | RNVC: 2
0107050: RNCC: 5 | RNVC: 9
50-79: RNCC: 5 | RNVC: 9
50.79-3'3/8: RNCC: 5 | RNVC: 9

26 Nov 1986

5120-14-321-5040
Box Wrench

143215040
0C081170101: RNCC: 3 | RNVC: 9
107921: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-411-9115
Mechanical Puller

144119115
14189990C: RNCC: 3 | RNVC: 2

16 Sep 1986

5120-14-256-7262
Hand Rivet Set

142567262
M0B228-6: RNCC: 3 | RNVC: 2
1532-6: RNCC: 5 | RNVC: 2

1 Jan 1969

5120-14-403-8786
Pipe Wrench

144038786
137.C2'1/2: RNCC: 3 | RNVC: 2
3148511373507: RNCC: 5 | RNVC: 2
0137350: RNCC: 5 | RNVC: 9
137-2"1-2: RNCC: 5 | RNVC: 9
137-2"1/2: RNCC: 5 | RNVC: 9
137-2POUCES1-2: RNCC: 5 | RNVC: 9

28 Aug 1985

5120-14-366-4826
Brake Repair Pliers

143664826
196TMS: RNCC: 3 | RNVC: 2
3148511454657: RNCC: 5 | RNVC: 2
0715 55 35: RNCC: 5 | RNVC: 2
196TM: RNCC: 5 | RNVC: 9

20 Nov 1980

5120-14-270-7928
Tack Claw

142707928
ARRACHECL0U340MM: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-389-8339
Mechanical Puller

143898339
26545908300: RNCC: 3 | RNVC: 2
265459083: RNCC: 5 | RNVC: 2
265459083: RNCC: 5 | RNVC: 9

20 Dec 1983

5120-14-265-0487
Mechanical Puller

142650487
330A93-3021-00: RNCC: 3 | RNVC: 2
330A93-3021-0000: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-553-0635
Box Wrench

145530635
39297028: RNCC: 3 | RNVC: 2

27 Feb 2007

5120-14-325-3148
Driftpin

143253148
NO PRIMARY REF14-325-3148: RNCC: 3 | RNVC: 2
98308: RNCC: 5 | RNVC: 9
98308: RNCC: 5 | RNVC: 9
85-686-1616: RNCC: 6 | RNVC: 9

2 Jul 1975

5120-14-446-6839
Drill Guide

144466839
541351: RNCC: 3 | RNVC: 2

9 Apr 1991

5120-14-281-0634
Box Wrench

142810634
301736T: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-416-4859
Mechanical Puller

144164859
ODS6146: RNCC: 3 | RNVC: 2
6146: RNCC: 5 | RNVC: 2

10 Jun 1987

5120-14-451-9796
Seal Inserter

144519796
1171-78: RNCC: 3 | RNVC: 2

17 Dec 1991

5120-14-417-7441
Driftpin

144177441
STM03266: RNCC: 3 | RNVC: 2
STM03266: RNCC: 5 | RNVC: 2

22 Jul 1987

5120-14-464-3614
Driftpin

144643614
AXE060003001E1: RNCC: 3 | RNVC: 2
AXE060003001E1: RNCC: 5 | RNVC: 2

28 Jul 1993

5120-14-305-6020
Open End Box Wrench

143056020
42-11X13: RNCC: 3 | RNVC: 2
3148511016404: RNCC: 5 | RNVC: 2

1 Jan 1974

5120-14-237-9555
Drill Guide

142379555
0210940: RNCC: 3 | RNVC: 2
885.G8: RNCC: 5 | RNVC: 2
885G8: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-539-9534
Aligning Punch

145399534
F10A830014160: RNCC: 3 | RNVC: 2

25 Feb 2004

5120-14-465-9540
Prick Punch

144659540
480-01Z00ST011-004: RNCC: 3 | RNVC: 2
06-1964-04: RNCC: 5 | RNVC: 2
G6-1964-04: RNCC: 5 | RNVC: 2
G6-1964-4: RNCC: 5 | RNVC: 2

21 Oct 1993

5120-14-481-1610
Hand Hydraulic Jack

144811610
PT10: RNCC: 3 | RNVC: 9
2115.352: RNCC: 5 | RNVC: 2
RASPT10: RNCC: 5 | RNVC: 9

20 Apr 1996

5120-14-425-6786
Box Wrench

144256786
8810600153: RNCC: 3 | RNVC: 2

21 Jul 1988

5120-14-542-9394
Mechanical Puller

145429394
8360035: RNCC: 3 | RNVC: 2
8360035: RNCC: 5 | RNVC: 2

14 Aug 2004

5120-14-365-0199
Socket Wrench Set

143650199
0516600: RNCC: 3 | RNVC: 2
S.441U: RNCC: 5 | RNVC: 2
S441U: RNCC: 5 | RNVC: 2

2 Sep 1980

5120-14-294-6517
Socket Wrench

142946517
02640002600: RNCC: 3 | RNVC: 2
026400026: RNCC: 5 | RNVC: 2
412727-26: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-480-2683
Mechanical Puller

144802683
888-368-300-1: RNCC: 3 | RNVC: 2

28 Feb 1996

5120-14-218-9644
Socket Wrench

142189644
72-15-16: RNCC: 3 | RNVC: 2
80 15-16: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-311-3961
Mechanical Puller

143113961
341A93-3226-00: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-514-6910
Mechanical Puller

145146910
10499633: RNCC: 3 | RNVC: 2

9 Jun 1999

5120-14-277-3077
Mechanical Puller

142773077
13599670A: RNCC: 3 | RNVC: 2
59967: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-530-6431
Seal Inserter

145306431
D47731R4: RNCC: 3 | RNVC: 2

1 Jul 2002

5120-14-468-5191
Seal Inserter

144685191
PD145D: RNCC: 3 | RNVC: 2
91739543: RNCC: 5 | RNVC: 2

3 Mar 1994

5120-14-466-2287
Hand Beading Tool

144662287
853-600-469-0: RNCC: 3 | RNVC: 2

3 Nov 1993

5120-14-228-1345
Hand Hammer

142281345
E71-014-2000EMCOR: RNCC: 2 | RNVC: 2
0002550301: RNCC: 3 | RNVC: 2
M0B2-2000EC: RNCC: 3 | RNVC: 2
3828-55EMMANCHE: RNCC: 3 | RNVC: 2
2-2000EMMANCHE: RNCC: 5 | RNVC: 9

1 Jan 1966

5120-14-343-9664
Socket Wrench

143439664
72 9-32H: RNCC: 3 | RNVC: 2
85-686-0385: RNCC: 6 | RNVC: 9

13 Jul 1977

5120-14-437-3611
Mechanical Puller

144373611
098005C: RNCC: 3 | RNVC: 2
09803: RNCC: 5 | RNVC: 2

31 Jan 1990

5120-14-525-5059
Mechanical Puller

145255059
7083: RNCC: 3 | RNVC: 2

6 Jun 2001

5120-14-224-8549
Box Wrench

142248549
50-67: RNCC: 3 | RNVC: 2
108-67: RNCC: 3 | RNVC: 2
119-67: RNCC: 3 | RNVC: 9
3272670279940: RNCC: 5 | RNVC: 2
DEM119-67: RNCC: 5 | RNVC: 9

1 Jan 1966

5120-14-366-8469
Driftpin

143668469
30MS087-809FSV: RNCC: 3 | RNVC: 2

20 Nov 1980

5120-14-399-0988
Box Wrench

143990988
132139: RNCC: 3 | RNVC: 2

6 Mar 1985

5120-14-408-2351
Drain Plug Wrench

144082351
GRC7803: RNCC: 3 | RNVC: 2

19 Mar 1986

5120-14-400-8802
Driftpin

144008802
16034337: RNCC: 3 | RNVC: 2
16034337: RNCC: 5 | RNVC: 9

21 May 1985

5120-14-388-9223
Mechanical Puller

143889223
8814374000: RNCC: 3 | RNVC: 2

29 Nov 1983

5120-14-540-7446
Hand Hammer

145407446
38051901: RNCC: 3 | RNVC: 2
ND069642: RNCC: 5 | RNVC: 2
4848ZG8613181495: RNCC: 6 | RNVC: 9

23 Apr 2004

5120-14-530-6444
Seal Inserter

145306444
D47726R2: RNCC: 3 | RNVC: 2

1 Jul 2002

5120-14-481-4820
Mechanical Puller

144814820
NO PRIMARY REF14-481-4820: RNCC: 3 | RNVC: 2
806160: RNCC: 5 | RNVC: 9

8 May 1996

5120-14-444-2638
Seal Inserter

144442638
TB10531: RNCC: 3 | RNVC: 2
73619: RNCC: 5 | RNVC: 2
73619: RNCC: 5 | RNVC: 9

20 Dec 1990

5120-14-552-7959
Drift Punch

145527959
247.G3: RNCC: 3 | RNVC: 2
3148511587911: RNCC: 5 | RNVC: 2
247.G3: RNCC: 5 | RNVC: 2

1 Feb 2007

5120-14-463-3289
Seal Inserter

144633289
0000085300: RNCC: 3 | RNVC: 2

9 Jun 1993

5120-14-326-0849
Putty Knife

143260849
32004N: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-202-1919
Saddler's Awl Haft

142021919
NO PRIMARY REF14-202-1919: RNCC: 3 | RNVC: 2
100-2: RNCC: 5 | RNVC: 9

1 Jan 1963

5120-14-313-0568
Socket Wrench

143130568
0M557: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-244-4740
Hand Hydraulic Jack

142444740
LP7T0NNES: RNCC: 3 | RNVC: 9
F117080: RNCC: 5 | RNVC: 2
RASLP7T0NNES: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-040-7352
Socket Wrench Set

140407352
000140003S: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-386-9747
Mechanical Puller

143869747
24545956800: RNCC: 3 | RNVC: 2
245459568: RNCC: 5 | RNVC: 9

24 Aug 1983

5120-14-539-3144
Seal Inserter

145393144
T651G3002124: RNCC: 3 | RNVC: 2

22 Dec 2003

5120-14-442-9527
Seal Inserter

144429527
RBJPE: RNCC: 3 | RNVC: 2
91605064: RNCC: 5 | RNVC: 2
ZINRBJPE: RNCC: 5 | RNVC: 9

7 Nov 1990

5120-14-367-6947
Box Wrench

143676947
8813503000: RNCC: 3 | RNVC: 2

19 Jan 1981

5120-14-546-4258
Seal Inserter

145464258
MGF613240001: RNCC: 3 | RNVC: 2

4 Jul 2005

5120-14-448-0013
Mechanical Puller

144480013
81464971: RNCC: 3 | RNVC: 2

12 Jun 1991

5120-14-273-2280
Box Wrench

142732280
265900: RNCC: 3 | RNVC: 2
265900: RNCC: 3 | RNVC: 2
S265900: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-406-9432
Socket Wrench

144069432
853-100-203-0: RNCC: 3 | RNVC: 2

22 Jan 1986

5120-14-237-4869
Mechanical Puller

142374869
3130S95-66-033-1: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-202-2891
Blacksmiths' Tongs

142022891
M0B33-600: RNCC: 3 | RNVC: 2

1 Jan 1963

5120-14-278-0772
Socket Wrench Set

142780772
0504900: RNCC: 3 | RNVC: 2
J.451E: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-371-3726
Socket Wrench

143713726
003870035M: RNCC: 3 | RNVC: 2

5 Aug 1981

5120-14-323-1372
Socket Wrench

143231372
3CGF198: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-541-0220
Hand Hammer

145410220
0476000801: RNCC: 3 | RNVC: 2
3303800196063: RNCC: 5 | RNVC: 2

5 May 2004

5120-14-497-4050
Box Wrench

144974050
AVA132: RNCC: 3 | RNVC: 2
14016: RNCC: 5 | RNVC: 2
14016: RNCC: 5 | RNVC: 9
F300 0T 023 1337: RNCC: 6 | RNVC: 9

15 Oct 1997

5120-14-329-6301
Mechanical Puller

143296301
MS1393: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-294-0707
Machinist's Vise

142940707
4213-80FIXE: RNCC: 3 | RNVC: 9

1 Jan 1973

5120-14-210-9843
Socket Wrench

142109843
8065: RNCC: 3 | RNVC: 2
Z00083-00S103: RNCC: 5 | RNVC: 1
912265: RNCC: 5 | RNVC: 2
PA355-143A1P3: RNCC: 5 | RNVC: 2
M251742: RNCC: 5 | RNVC: 2
91409966: RNCC: 5 | RNVC: 2
PA355-143A1P3: RNCC: 5 | RNVC: 9
PA355-143A1P3: RNCC: 5 | RNVC: 9
PA360-1P3: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-375-2439
Box Wrench

143752439
ST406M91P46: RNCC: 3 | RNVC: 2

26 Feb 1982

5120-14-368-5977
Mechanical Puller

143685977
24545975100: RNCC: 3 | RNVC: 2
245459751: RNCC: 5 | RNVC: 9

20 Feb 1981

5120-14-553-2732
Mechanical Puller

145532732
JBXOUTDC09: RNCC: 3 | RNVC: 2

20 Mar 2007

5120-14-278-5234
Hand Screw Jack

142785234
50569: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-516-9264
Screw Extractor

145169264
285.14: RNCC: 3 | RNVC: 2

27 Oct 1999

5120-14-391-8671
Mechanical Puller

143918671
46AM049: RNCC: 3 | RNVC: 2

21 Mar 1984

5120-14-410-3521
Mechanical Puller

144103521
8812548000: RNCC: 3 | RNVC: 2

18 Jun 1986

5120-14-522-6754
Aligning Punch

145226754
9405.46747: RNCC: 3 | RNVC: 2

15 Nov 2000

5120-14-281-7587
Mechanical Puller

142817587
C55697: RNCC: 3 | RNVC: 2
100877: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-283-6562
Screw Extractor

142836562
903-6: RNCC: 3 | RNVC: 2
2787-6: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-283-6560
Screw Extractor

142836560
903-4: RNCC: 3 | RNVC: 2
2787-4: RNCC: 3 | RNVC: 2
649-8: RNCC: 3 | RNVC: 9
DEM649-8: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-321-5287
Marlinespike

143215287
SA0084-400: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-310-5424
Socket Wrench Set

143105424
NV301E: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-220-7479
Socket Wrench

142207479
BE42-1-2-1-2: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-383-6550
Socket Wrench

143836550
32954: RNCC: 3 | RNVC: 2

11 Apr 1983

5120-14-421-6301
Open End Box Wrench

144216301
210100: RNCC: 3 | RNVC: 2

20 Jan 1988

5120-14-446-6984
Drill Guide

144466984
548017: RNCC: 3 | RNVC: 2

9 Apr 1991

5120-14-298-4774
Box Wrench

142984774
57-13X17: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-369-3276
Seal Inserter

143693276
366A93-3201-10: RNCC: 3 | RNVC: 2

7 Mar 1996

5120-14-220-7486
Socket Wrench

142207486
BB221-21: RNCC: 3 | RNVC: 9

1 Jan 1965

5120-14-515-8544
Socket Wrench

145158544
MAT298-0190F15: RNCC: 3 | RNVC: 2

17 Aug 1999

5120-14-391-6571
Box Wrench Set

143916571
56JE7T: RNCC: 3 | RNVC: 2

21 Mar 1984

5120-14-401-5217
Hand Beading Tool

144015217
16849046: RNCC: 3 | RNVC: 2
16849046: RNCC: 5 | RNVC: 9

13 Jun 1985

5120-14-432-8459
Seal Inserter

144328459
NO PRIMARY REF14-432-8459: RNCC: 3 | RNVC: 2
540007: RNCC: 5 | RNVC: 9
540007: RNCC: 5 | RNVC: 9

28 Jun 1989

5120-14-342-5310
Driftpin

143425310
NO PRIMARY REF14-342-5310: RNCC: 3 | RNVC: 2
97520015: RNCC: 5 | RNVC: 9

16 May 1977

5120-14-421-3431
Drill Guide

144213431
537099: RNCC: 3 | RNVC: 2

14 Jan 1988

5120-14-546-2133
Seal Inserter

145462133
MGF604230001: RNCC: 3 | RNVC: 2

15 Jun 2005

5120-14-548-3096
Plastic Mallet

145483096
208A.25CB: RNCC: 3 | RNVC: 2

6 Jan 2006

5120-14-517-8887
Socket Wrench

145178887
GS141-29: RNCC: 3 | RNVC: 2
1.70.1703: RNCC: 5 | RNVC: 2

17 Jan 2000

5120-14-407-3254
Box Wrench

144073254
853-100-160-0: RNCC: 3 | RNVC: 2

12 Feb 1986

5120-14-531-8864
Mechanical Puller

145318864
T633G3001101: RNCC: 3 | RNVC: 2

25 Sep 2002

5120-14-488-9490
Mechanical Puller

144889490
38127: RNCC: 3 | RNVC: 2

13 Jun 1997

5120-14-446-4756
Seal Inserter

144464756
8815128000: RNCC: 3 | RNVC: 2

20 Mar 1991

5120-14-399-3366
Seal Inserter

143993366
MGF447-26: RNCC: 3 | RNVC: 2

6 Mar 1985

5120-14-509-9588
Mechanical Puller

145099588
006-513-224: RNCC: 3 | RNVC: 2
5120AA1120820: RNCC: 6 | RNVC: 9

4 Nov 1998

5120-14-430-1090
Open End Box Wrench

144301090
42.10X11: RNCC: 3 | RNVC: 2
3148511016305: RNCC: 5 | RNVC: 2
42-10X11: RNCC: 5 | RNVC: 2
250-4481: RNCC: 5 | RNVC: 2
42.10X11: RNCC: 5 | RNVC: 2
FACOM42.10X11: RNCC: 5 | RNVC: 9
0101630: RNCC: 5 | RNVC: 9

1 Mar 1989

5120-14-420-9544
Bench And Pipe Vise

144209544
1222.175: RNCC: 3 | RNVC: 2
1222-175: RNCC: 5 | RNVC: 2
3148512257349: RNCC: 5 | RNVC: 2
91739305: RNCC: 5 | RNVC: 2
2695 54 150: RNCC: 5 | RNVC: 2
0225734: RNCC: 5 | RNVC: 9

6 Jan 1988

5120-14-274-7894
Plastic Mallet

142747894
208-60AB: RNCC: 3 | RNVC: 2
3903-60PLASTIQUEDUR: RNCC: 3 | RNVC: 9

1 Jan 1971

5120-14-448-8754
Seal Inserter

144488754
851-290-021-0: RNCC: 3 | RNVC: 2

24 Jul 1991

5120-14-246-2007
Socket Wrench

142462007
D1010-1151: RNCC: 3 | RNVC: 2
AT5744A: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-362-6505
Hand Hydraulic Jack

143626505
P4691: RNCC: 3 | RNVC: 2
85-689-0796: RNCC: 6 | RNVC: 9

19 Mar 1980

5120-14-387-1916
Mechanical Puller

143871916
MGB233-47: RNCC: 3 | RNVC: 2
MGB233-47: RNCC: 5 | RNVC: 2

24 Aug 1983

5120-14-216-1910
Digging Bar

142161910
9136666: RNCC: 3 | RNVC: 2
9136666: RNCC: 5 | RNVC: 2

1 Jan 1965

5120-14-485-8823
Box Wrench

144858823
K7739-12105-5BAX6BA: RNCC: 3 | RNVC: 2
12105-5BAX6BA: RNCC: 5 | RNVC: 2

19 Feb 1997

5120-14-446-7039
Drill Guide

144467039
549740: RNCC: 3 | RNVC: 2

9 Apr 1991

5120-14-349-0971
Socket Wrench

143490971
72-55: RNCC: 3 | RNVC: 2

19 Apr 1978

5120-14-528-0688
Mechanical Puller

145280688
888-478-800-1: RNCC: 3 | RNVC: 2

12 Dec 2001

5120-14-481-6048
Mechanical Puller

144816048
NO PRIMARY REF14-481-6048: RNCC: 3 | RNVC: 2
815710: RNCC: 5 | RNVC: 9

16 May 1996

5120-14-370-6159
Hand Screw Jack

143706159
11-5205-540: RNCC: 3 | RNVC: 2

18 May 1981

5120-14-489-3176
Seal Inserter

144893176
10144109: RNCC: 3 | RNVC: 2

9 Jul 1997

5120-14-529-1934
Mechanical Puller

145291934
884931-7: RNCC: 3 | RNVC: 2
SYB5308: RNCC: 5 | RNVC: 2

15 Mar 2002

5120-14-540-7905
Hand Hammer

145407905
MBOULEDIAL1.2: RNCC: 3 | RNVC: 2

23 Apr 2004

5120-14-449-0031
Box Wrench Set

144490031
55.JU8: RNCC: 3 | RNVC: 2
55JU8: RNCC: 5 | RNVC: 2
91710357: RNCC: 5 | RNVC: 2
0530800: RNCC: 5 | RNVC: 2
3148515308000: RNCC: 5 | RNVC: 2

24 Jul 1991

5120-14-532-9630
Box Wrench Set

145329630
55.JD12LIT: RNCC: 3 | RNVC: 2
3148515305504: RNCC: 5 | RNVC: 2

14 Jan 2003

5120-14-281-0636
Socket Wrench

142810636
301740T: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-281-1971
Hand Hammer

142811971
0474250301: RNCC: 3 | RNVC: 2
M0B474EC: RNCC: 3 | RNVC: 2
MOB474EC: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-432-3752
Socket Wrench

144323752
540407: RNCC: 3 | RNVC: 2
00540407: RNCC: 5 | RNVC: 2

7 Jun 1989

5120-14-229-8596
Socket Wrench

142298596
NO PRIMARY REF14-229-8596: RNCC: 3 | RNVC: 2
144KL419: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-528-0679
Seal Inserter

145280679
888-477-700-1: RNCC: 3 | RNVC: 2

12 Dec 2001

5120-14-041-2394
Mechanical Puller

140412394
45-921-13-01: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-455-1528
Box Wrench

144551528
0-43865-2: RNCC: 3 | RNVC: 2
85-694-7843: RNCC: 6 | RNVC: 9

1 May 1992

5120-14-353-9778
Mechanical Puller

143539778
851-500-556-0: RNCC: 3 | RNVC: 2
OXB501-009-100-24: RNCC: 3 | RNVC: 2

16 Jan 1979

5120-14-322-5405
Box Wrench

143225405
55.34X36: RNCC: 3 | RNVC: 2
3148511114803: RNCC: 5 | RNVC: 2
55-34X36: RNCC: 5 | RNVC: 2
0111480: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-300-8892
Mechanical Puller

143008892
460: RNCC: 3 | RNVC: 2
3272670252905: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-271-8407
Socket Wrench

142718407
30697: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-463-5399
Hand Screw Jack

144635399
95495249: RNCC: 3 | RNVC: 9
95495249: RNCC: 5 | RNVC: 2

17 Jun 1993

5120-14-369-6964
Socket Wrench

143696964
BB215: RNCC: 3 | RNVC: 9

17 Apr 1981

5120-14-552-7321
Hand Hammer

145527321
860A.32: RNCC: 3 | RNVC: 2
860A.32: RNCC: 5 | RNVC: 2
3148512091004: RNCC: 5 | RNVC: 2

26 Jan 2007

5120-14-410-0089
Mechanical Puller

144100089
0-64930-3: RNCC: 3 | RNVC: 2
0-64930-03: RNCC: 5 | RNVC: 2

4 Jun 1986

5120-14-504-3683
Seal Inserter

145043683
853-620-064-0: RNCC: 3 | RNVC: 2

11 Feb 1998

5120-14-430-1091
Open End Box Wrench

144301091
42.14X17: RNCC: 3 | RNVC: 2
130493: RNCC: 5 | RNVC: 2
0714 231 417: RNCC: 5 | RNVC: 2
3148511016701: RNCC: 5 | RNVC: 2
42-14X17: RNCC: 5 | RNVC: 2
1028468X00: RNCC: 5 | RNVC: 2
250-4532: RNCC: 5 | RNVC: 2
FACOM42.14X17: RNCC: 5 | RNVC: 9
0101670: RNCC: 5 | RNVC: 9

1 Mar 1989

5120-14-440-1651
Aligning Punch

144401651
853-202-641-0: RNCC: 3 | RNVC: 2

11 Jul 1990

5120-14-440-2936
Mechanical Puller

144402936
5000269014: RNCC: 3 | RNVC: 2
80996010093: RNCC: 5 | RNVC: 2
89409843: RNCC: 5 | RNVC: 2

11 Jul 1990

5120-14-461-2808
Mechanical Puller

144612808
45057133: RNCC: 3 | RNVC: 2
45057133: RNCC: 5 | RNVC: 9

3 Mar 1993

5120-14-400-4664
Hand Tube Bender

144004664
344A.14: RNCC: 3 | RNVC: 2
344A.14: RNCC: 5 | RNVC: 2
3148511680841: RNCC: 5 | RNVC: 2
1715 122 014: RNCC: 5 | RNVC: 2
0168084: RNCC: 5 | RNVC: 9
344-14: RNCC: 5 | RNVC: 9

24 Apr 1985

5120-14-504-7545
Mechanical Puller

145047545
T60UT0004000: RNCC: 3 | RNVC: 2

3 Mar 1998

5120-14-258-7804
Open End Box Wrench

142587804
42-35X38: RNCC: 3 | RNVC: 2

1 Jan 1969

5120-14-429-7216
Seal Inserter

144297216
853-290-086-0: RNCC: 3 | RNVC: 2

8 Feb 1989

5120-14-313-4554
Socket Wrench

143134554
ECHE183: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-455-0070
Hand Rivet Set

144550070
853-600-344-6: RNCC: 3 | RNVC: 2

1 May 1992

5120-14-527-6290
Hand Screw Jack

145276290
743-5T: RNCC: 3 | RNVC: 2
SYQ0488: RNCC: 5 | RNVC: 2
743-5T: RNCC: 5 | RNVC: 2
14-283-6542: RNCC: 6 | RNVC: 9

7 Nov 2001

5120-14-249-3958
Mechanical Puller

142493958
3210-97-32-445: RNCC: 3 | RNVC: 2
08-302: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-306-3732
Mechanical Puller

143063732
NO PRIMARY REF14-306-3732: RNCC: 3 | RNVC: 2
RT7888: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-539-9773
Rivet Bucking Bar

145399773
BC-588B: RNCC: 3 | RNVC: 2

25 Feb 2004

5120-14-454-0099
Mechanical Puller

144540099
M13-706358-00: RNCC: 3 | RNVC: 2

19 Mar 1992

5120-14-522-8866
Seal Inserter

145228866
45451948: RNCC: 3 | RNVC: 2
8023918M00: RNCC: 5 | RNVC: 2

6 Dec 2000

5120-14-554-5142
Hand Tube Bender

145545142
19930: RNCC: 3 | RNVC: 2
3148510199306: RNCC: 3 | RNVC: 2
DFR: RNCC: 5 | RNVC: 2

17 Jul 2007

5120-14-408-5724
Wood Mallet

144085724
2160: RNCC: 3 | RNVC: 9
TONNEAUFRETTE60: RNCC: 5 | RNVC: 9

2 Apr 1986

5120-14-300-9495
Hand Screw Jack

143009495
341A91-0055-00: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-509-9552
Mechanical Puller

145099552
1039-098A500: RNCC: 3 | RNVC: 2
5120AA1118628: RNCC: 6 | RNVC: 9

4 Nov 1998

5120-14-348-2583
Mechanical Puller

143482583
26-157: RNCC: 3 | RNVC: 2
49-09-4007: RNCC: 3 | RNVC: 2

29 Mar 1978

5120-14-301-4113
Socket Wrench

143014113
91-8: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-427-2210
Mechanical Puller

144272210
46MS047-10: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-401-5659
Mechanical Puller

144015659
355A93-3545-01: RNCC: 3 | RNVC: 2

13 Jun 1985

5120-14-424-8954
Socket Wrench

144248954
9970-115-718: RNCC: 3 | RNVC: 2

9 Jun 1988

5120-14-343-3794
Socket Wrench

143433794
MUP5230: RNCC: 3 | RNVC: 2

16 Jun 1977

5120-14-218-9634
Socket Wrench

142189634
72-7-16: RNCC: 3 | RNVC: 2
80 7-16: RNCC: 3 | RNVC: 2
80 7-16: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-361-0411
Ratchet Wrench

143610411
D19-28REPHANV: RNCC: 3 | RNVC: 2

19 Dec 1979

5120-14-378-3388
Plier Clamp

143783388
P2: RNCC: 3 | RNVC: 2
P2: RNCC: 5 | RNVC: 2

20 Jul 1982

5120-14-399-3362
Seal Inserter

143993362
MGF159-22: RNCC: 3 | RNVC: 2

6 Mar 1985

5120-14-361-4900
Mechanical Puller

143614900
8810318000: RNCC: 3 | RNVC: 2
85-691-1821: RNCC: 6 | RNVC: 9

24 Jan 1980

5120-14-283-6559
Screw Extractor

142836559
903-3: RNCC: 3 | RNVC: 2
2787-3: RNCC: 3 | RNVC: 2
649-6: RNCC: 3 | RNVC: 9
DEM649-6: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-525-9422
Socket Wrench

145259422
888-407-800-1: RNCC: 3 | RNVC: 2

20 Jun 2001

5120-14-466-4924
Aligning Punch

144664924
851-300-114-0: RNCC: 3 | RNVC: 2

15 Nov 1993

5120-14-274-8514
Socket Wrench

142748514
86-15: RNCC: 3 | RNVC: 2
92.15: RNCC: 3 | RNVC: 2
168-15: RNCC: 3 | RNVC: 9
3272670277571: RNCC: 5 | RNVC: 2
3148511279502: RNCC: 5 | RNVC: 2
92-15: RNCC: 5 | RNVC: 2
0127950: RNCC: 5 | RNVC: 9
DEM168-15: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-426-8433
Socket Wrench

144268433
0411-60185: RNCC: 3 | RNVC: 2

23 Sep 1988

5120-14-410-7991
Hammer Handle

144107991
C51B: RNCC: 3 | RNVC: 2

9 Jul 1986

5120-14-449-0080
Pipe Wrench

144490080
OU165-TH: RNCC: 3 | RNVC: 2
96147903: RNCC: 5 | RNVC: 2

24 Jul 1991

5120-14-350-5986
Socket Wrench

143505986
94.5,5: RNCC: 3 | RNVC: 2
3148511287507: RNCC: 5 | RNVC: 2
94-5-5: RNCC: 5 | RNVC: 2
0183002R00: RNCC: 5 | RNVC: 2
91316641: RNCC: 5 | RNVC: 2
0128750: RNCC: 5 | RNVC: 9

12 Jul 1978

5120-14-232-0890
Socket Wrench

142320890
94.6: RNCC: 3 | RNVC: 2
3148511287606: RNCC: 5 | RNVC: 2
94-6: RNCC: 5 | RNVC: 2
91392550: RNCC: 5 | RNVC: 2
0128760: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-484-9275
Mechanical Puller

144849275
2-50473: RNCC: 3 | RNVC: 2

12 Dec 1996

5120-14-401-5355
Drive Pin Punch

144015355
300286-0: RNCC: 3 | RNVC: 2

13 Jun 1985

5120-14-341-5745
Socket Wrench

143415745
RT6073: RNCC: 3 | RNVC: 2

16 Mar 1977

5120-14-417-6859
Box Wrench Set

144176859
62JN7: RNCC: 3 | RNVC: 2

22 Jul 1987

5120-14-401-5650
Mechanical Puller

144015650
350A93-3700-00: RNCC: 3 | RNVC: 2

13 Jun 1985

5120-14-448-3200
Caulking Mallet

144483200
46033-71185: RNCC: 3 | RNVC: 2

24 Jun 1991

5120-14-552-4571
Drain Plug Wrench

145524571
D.13A: RNCC: 3 | RNVC: 2

4 Jan 2007

5120-14-375-2983
Socket Wrench

143752983
A33737V: RNCC: 3 | RNVC: 2

26 Feb 1982

5120-14-549-4170
Socket Wrench

145494170
94A.5: RNCC: 3 | RNVC: 2

31 Mar 2006

5120-14-202-5562
Socket Wrench

142025562
4006: RNCC: 3 | RNVC: 2

1 Jan 1963

5120-14-460-5622
Mechanical Puller

144605622
7M564: RNCC: 3 | RNVC: 2

1 Feb 1993

5120-14-359-7524
Mechanical Puller

143597524
A132472: RNCC: 3 | RNVC: 2
100378: RNCC: 5 | RNVC: 2

15 Oct 1979

5120-14-317-9187
Open End Box Wrench

143179187
M2D61025: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-263-8834
Box Wrench

142638834
17-9-1462: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-438-9677
Mechanical Puller

144389677
330A98-3330-00: RNCC: 3 | RNVC: 2

11 Apr 1990

5120-14-214-1374
Drive Pin Punch

142141374
6-10-118-0: RNCC: 3 | RNVC: 2
6101-180: RNCC: 5 | RNVC: 2

1 Jan 1965

5120-14-542-9433
Seal Inserter

145429433
8460011: RNCC: 3 | RNVC: 2
8460011: RNCC: 5 | RNVC: 2

14 Aug 2004

5120-14-555-3250
Drive Pin Punch

145553250
511331: RNCC: 3 | RNVC: 2

25 Oct 2007

5120-14-425-6788
Mechanical Puller

144256788
8811329000: RNCC: 3 | RNVC: 2

21 Jul 1988

5120-14-291-8018
Box Wrench

142918018
02640047000: RNCC: 3 | RNVC: 2
026400470: RNCC: 5 | RNVC: 2
412817: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-284-3307
Pinch Bar

142843307
149-150: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-543-2416
Hand Hammer

145432416
P16: RNCC: 3 | RNVC: 2

8 Oct 2004

5120-14-398-7311
Hand Hydraulic Jack

143987311
5000515414: RNCC: 3 | RNVC: 2
5000515414: RNCC: 5 | RNVC: 9

6 Feb 1985

5120-14-513-2753
Mechanical Puller

145132753
NO PRIMARY REF14-513-2753: RNCC: 3 | RNVC: 2
NNP 5120860757582: RNCC: 5 | RNVC: 9

10 Mar 1999

5120-14-436-2918
Mechanical Puller

144362918
33-9223: RNCC: 3 | RNVC: 2

13 Dec 1989

5120-14-294-0719
Pipe Vise

142940719
2002200: RNCC: 3 | RNVC: 2
2002-2: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-407-3491
Socket Wrench

144073491
2320-06803: RNCC: 3 | RNVC: 2

12 Feb 1986

5120-14-535-5434
Drain Plug Wrench

145355434
5000264110: RNCC: 3 | RNVC: 2

3 Jun 2003

5120-14-311-5943
Driftpin

143115943
2320-04685: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-442-1531
Rivet Bucking Bar

144421531
853-600-264-0: RNCC: 3 | RNVC: 2

3 Oct 1990

5120-14-409-3083
Mechanical Puller

144093083
DLP752740: RNCC: 3 | RNVC: 2

27 May 1986

5120-14-425-9511
Aligning Punch

144259511
500248HTH20R2: RNCC: 3 | RNVC: 2

28 Jul 1988

5120-14-384-5843
Mechanical Puller

143845843
700000: RNCC: 3 | RNVC: 2
700000: RNCC: 5 | RNVC: 2

2 Jun 1983

5120-14-531-8850
Mechanical Puller

145318850
T632G3007101: RNCC: 3 | RNVC: 2

25 Sep 2002

5120-14-350-5386
Tack Claw

143505386
525242: RNCC: 3 | RNVC: 2

12 Jul 1978

5120-14-437-7419
Seal Inserter

144377419
9689160214: RNCC: 3 | RNVC: 2
9689160214: RNCC: 5 | RNVC: 2

14 Feb 1990

5120-14-428-6737
Seal Inserter

144286737
853-202-805-0: RNCC: 3 | RNVC: 2

8 Dec 1988

5120-14-516-6625
Hand Hammer

145166625
608008005: RNCC: 3 | RNVC: 2

8 Oct 1999

5120-14-434-6251
Seal Inserter

144346251
EMH141378L: RNCC: 3 | RNVC: 2
EMH141378L: RNCC: 5 | RNVC: 9

27 Sep 1989

5120-14-415-4725
Mechanical Puller

144154725
4702: RNCC: 3 | RNVC: 2

18 May 1987

5120-14-249-9371
Box Wrench

142499371
C55406: RNCC: 3 | RNVC: 2
100857: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-549-0020
Socket Wrench Set

145490020
R.400AVSE: RNCC: 3 | RNVC: 2
R.400AVSE: RNCC: 5 | RNVC: 2

1 Mar 2006

5120-14-281-7608
Mechanical Puller

142817608
A121639: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-519-6968
Socket Wrench Set

145196968
R.431XDP: RNCC: 3 | RNVC: 2
91794367: RNCC: 5 | RNVC: 2

29 Mar 2000

5120-14-298-7865
Hand Hammer

142987865
AMPC0M1: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-469-1683
Wrecking Bar

144691683
141.0: RNCC: 3 | RNVC: 2
141-0: RNCC: 3 | RNVC: 2
3272670300996: RNCC: 5 | RNVC: 2

11 Apr 1994

5120-14-552-1487
Hand Beading Tool

145521487
888-463-400-1: RNCC: 3 | RNVC: 2

28 Nov 2006

5120-14-232-7180
Open End Box Wrench

142327180
37-10X12: RNCC: 3 | RNVC: 2
V2-95-431-01: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-522-3808
Mechanical Puller

145223808
TC3065G001: RNCC: 3 | RNVC: 2

25 Oct 2000

5120-14-542-9630
Mechanical Puller

145429630
837052: RNCC: 3 | RNVC: 2

14 Aug 2004

5120-14-481-8977
Aligning Punch

144818977
HSS831AH715: RNCC: 3 | RNVC: 2
89167398: RNCC: 5 | RNVC: 2

6 Jun 1996

5120-14-262-5499
Mechanical Puller

142625499
0-62118: RNCC: 3 | RNVC: 2
062-118: RNCC: 5 | RNVC: 2
062118: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-330-1943
Box Wrench

143301943
105N41X46: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-411-9187
Driftpin

144119187
27980100: RNCC: 3 | RNVC: 2

16 Sep 1986

5120-14-461-6463
Hammer Handle

144616463
6644: RNCC: 3 | RNVC: 2

19 Mar 1993

5120-14-317-1842
Socket Wrench

143171842
1716: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-449-7725
Socket Wrench Set

144497725
0532450: RNCC: 3 | RNVC: 2
76.P9M: RNCC: 5 | RNVC: 2

9 Sep 1991

5120-14-445-9089
Socket Wrench

144459089
131540: RNCC: 3 | RNVC: 2
89415347: RNCC: 5 | RNVC: 2
131540: RNCC: 5 | RNVC: 9

27 Feb 1991

5120-14-359-0457
Socket Wrench

143590457
75.5/8: RNCC: 3 | RNVC: 2
75 5-8: RNCC: 5 | RNVC: 2
75-5-8: RNCC: 5 | RNVC: 2
3148511203200: RNCC: 5 | RNVC: 2
0120320: RNCC: 5 | RNVC: 9

7 Sep 1979

5120-14-546-2816
Socket Wrench

145462816
Z7029: RNCC: 3 | RNVC: 2
SYQ5760: RNCC: 5 | RNVC: 2

22 Jun 2005

5120-14-523-8293
Gas Torch

145238293
SOUDOGAZX2000: RNCC: 3 | RNVC: 2

6 Feb 2001

5120-14-483-8633
Mechanical Puller

144838633
0-702295-5: RNCC: 3 | RNVC: 2

5 Oct 1996

5120-14-468-5670
Socket Wrench

144685670
877616: RNCC: 3 | RNVC: 2
877616: RNCC: 5 | RNVC: 2

9 Mar 1994

5120-14-316-5867
Open End Box Wrench

143165867
589209: RNCC: 3 | RNVC: 9

1 Jan 1975

5120-14-425-9536
Aligning Punch

144259536
500437HTH20R2: RNCC: 3 | RNVC: 2

28 Jul 1988

5120-14-367-6233
Mechanical Puller

143676233
84PAA: RNCC: 3 | RNVC: 2

19 Jan 1981

5120-14-281-0635
Box Wrench

142810635
301737T: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-355-3861
Mechanical Puller

143553861
0-700243: RNCC: 3 | RNVC: 2
0700-243: RNCC: 5 | RNVC: 2

19 Mar 1979

5120-14-467-3618
Open End Box Wrench

144673618
26-460: RNCC: 3 | RNVC: 2

7 Jan 1994

5120-14-540-0150
Hand Screw Jack

145400150
6401DPA180XX: RNCC: 3 | RNVC: 2

25 Feb 2004

5120-14-252-2656
Box Wrench

142522656
552BL1DET10: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-329-5566
Socket Wrench

143295566
4015: RNCC: 3 | RNVC: 2
0854301200: RNCC: 5 | RNVC: 2

2 Jul 1975

5120-14-414-2779
Socket Wrench

144142779
BB. 6P: RNCC: 3 | RNVC: 9

28 Jan 1987

5120-14-458-8423
Drive Pin Punch

144588423
851-910-017-0: RNCC: 3 | RNVC: 2

5 Nov 1992

5120-14-380-6764
Hand Hammer

143806764
E71-012-315EMC0R: RNCC: 2 | RNVC: 2
400-315EC: RNCC: 3 | RNVC: 2
E71-012-315EM: RNCC: 5 | RNVC: 2
400-26EC: RNCC: 5 | RNVC: 2
E71-012-26EMC0R: RNCC: 5 | RNVC: 2

29 Nov 1982

5120-14-427-0758
Mechanical Puller

144270758
0849378C00: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-205-6898
Mechanical Puller

142056898
V0S: RNCC: 3 | RNVC: 2
0362891168: RNCC: 5 | RNVC: 2
0362891168: RNCC: 5 | RNVC: 9
362891168: RNCC: 5 | RNVC: 9
ZINV0S: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-316-4994
Mechanical Puller

143164994
0U50123: RNCC: 3 | RNVC: 2
50123: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-421-3460
Hand Rivet Set

144213460
537226: RNCC: 3 | RNVC: 2

14 Jan 1988

5120-14-280-3203
Socket Wrench Set

142803203
73R15: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-236-5531
Socket Wrench

142365531
94-9: RNCC: 3 | RNVC: 2
3148511287903: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-480-2285
Drill Guide

144802285
33-060-12-8-16: RNCC: 3 | RNVC: 2
1008409D00: RNCC: 5 | RNVC: 2

28 Feb 1996

5120-14-530-8541
Nutdriver

145308541
119050: RNCC: 3 | RNVC: 2
3148511190500: RNCC: 5 | RNVC: 2
74.11/32: RNCC: 5 | RNVC: 2

9 Jul 2002

5120-14-040-2931
Mechanical Puller

140402931
0195-78: RNCC: 3 | RNVC: 2
RA195: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-256-2164
Box Wrench

142562164
100-26X27: RNCC: 3 | RNVC: 2

1 Jan 1969

5120-14-425-9310
Drift Punch

144259310
600226: RNCC: 3 | RNVC: 2

28 Jul 1988

5120-14-530-2075
Box Wrench

145302075
55.13/16X7/8: RNCC: 3 | RNVC: 2
3148511120200: RNCC: 5 | RNVC: 2

22 May 2002

5120-14-458-3099
Socket Wrench

144583099
45056148: RNCC: 3 | RNVC: 2
45056148: RNCC: 5 | RNVC: 9

15 Oct 1992

5120-14-366-5103
Hand Rivet Set

143665103
1532-5-5: RNCC: 3 | RNVC: 2

20 Nov 1980

5120-14-518-2847
Hand Hammer

145182847
0003600201: RNCC: 3 | RNVC: 2
SYQ1784: RNCC: 5 | RNVC: 2
1M1000152: RNCC: 5 | RNVC: 2

2 Feb 2000

5120-14-265-3214
Socket Wrench

142653214
PR46009: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-533-9525
Screwdriver Bit Set

145339525
115200: RNCC: 3 | RNVC: 2
WX061111: RNCC: 6 | RNVC: 9

5 Mar 2003

5120-14-261-8785
Drive Pin Punch

142618785
3130-95-63-008: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-326-5919
Crowbar

143265919
NO PRIMARY REF14-326-5919: RNCC: 3 | RNVC: 2
599A: RNCC: 5 | RNVC: 9

2 Jul 1975

5120-14-367-6221
Box Wrench

143676221
VDP7562: RNCC: 3 | RNVC: 2

19 Jan 1981

5120-14-529-4367
Aligning Punch

145294367
6501JBR100002: RNCC: 3 | RNVC: 2

29 Mar 2002

5120-14-268-0070
Box Wrench

142680070
DE49B1: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-289-3142
Mechanical Puller

142893142
30445: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-406-8660
Mechanical Puller

144068660
52640902500: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-483-9106
Mechanical Puller

144839106
8818976000: RNCC: 3 | RNVC: 2

10 Oct 1996

5120-14-204-9175
Hammer Handle

142049175
E71011B38A300: RNCC: 2 | RNVC: 2

1 Jan 1963

5120-14-484-3852
Seal Inserter

144843852
OU142829-1: RNCC: 3 | RNVC: 2
OU142829-1: RNCC: 5 | RNVC: 2
OU142829-1: RNCC: 5 | RNVC: 9
F300 0T 020 6709: RNCC: 6 | RNVC: 9

14 Nov 1996

5120-14-543-5427
Box Wrench

145435427
0M3393: RNCC: 3 | RNVC: 2

19 Nov 2004

5120-14-304-2482
Mechanical Puller

143042482
ARL10496: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-415-1021
Mechanical Puller

144151021
26545911900: RNCC: 3 | RNVC: 2
265459119: RNCC: 5 | RNVC: 9
43296922: RNCC: 5 | RNVC: 9

1 Apr 1987

5120-14-506-9699
Socket Wrench

145069699
PB.MODSHP: RNCC: 3 | RNVC: 2

27 May 1998

5120-14-437-9393
Socket Wrench

144379393
101000: RNCC: 3 | RNVC: 2
C66133: RNCC: 5 | RNVC: 2

28 Feb 1990

5120-14-445-2253
Mechanical Puller

144452253
U.53S4A: RNCC: 3 | RNVC: 2
3148510703923: RNCC: 5 | RNVC: 2
0070392: RNCC: 5 | RNVC: 9

6 Feb 1991

5120-14-291-8199
Pipe Wrench

142918199
134-18: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-481-1770
Socket Wrench

144811770
GS141-21: RNCC: 3 | RNVC: 2

25 Apr 1996

5120-14-549-9328
Box Wrench

145499328
55A.15/16X1': RNCC: 3 | RNVC: 2
55A.15/16X1': RNCC: 5 | RNVC: 2

18 May 2006

5120-14-200-3022
Box Wrench

142003022
55.17X19: RNCC: 3 | RNVC: 2
111-17X19: RNCC: 3 | RNVC: 9
3148511110805: RNCC: 5 | RNVC: 2
55-17X19: RNCC: 5 | RNVC: 2
105N17X19: RNCC: 5 | RNVC: 2
91367209: RNCC: 5 | RNVC: 2
0713 305 179: RNCC: 5 | RNVC: 2
0111080: RNCC: 5 | RNVC: 9
DEM111-17X19: RNCC: 5 | RNVC: 9

1 Jan 1962

5120-14-317-7913
Mechanical Puller

143177913
NO PRIMARY REF14-317-7913: RNCC: 3 | RNVC: 2
800312-79: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-217-5814
Mechanical Puller

142175814
222508-66: RNCC: 3 | RNVC: 2
222508-66: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-417-7439
Driftpin

144177439
STM03264: RNCC: 3 | RNVC: 2
STM03264: RNCC: 5 | RNVC: 2

22 Jul 1987

5120-14-281-8192
Mechanical Puller

142818192
8810015000: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-463-5619
Mechanical Puller

144635619
45057960: RNCC: 3 | RNVC: 2
45057960: RNCC: 5 | RNVC: 9

17 Jun 1993

5120-14-436-4264
Hand Hammer

144364264
BB31-EC: RNCC: 3 | RNVC: 2

3 Jan 1990

5120-14-446-1305
Mechanical Puller

144461305
600059: RNCC: 3 | RNVC: 2

6 Mar 1991

5120-14-407-5917
Socket Wrench

144075917
31402942: RNCC: 3 | RNVC: 9
85-693-0365: RNCC: 6 | RNVC: 9

27 Feb 1986

5120-14-548-6398
Box Wrench

145486398
R47505: RNCC: 3 | RNVC: 2

27 Jan 2006

5120-14-393-0338
Drive Pin Punch

143930338
248.3: RNCC: 3 | RNVC: 2
248.3: RNCC: 5 | RNVC: 2
3148511592809: RNCC: 5 | RNVC: 2
3059000252: RNCC: 5 | RNVC: 2
248-3: RNCC: 5 | RNVC: 2
138154: RNCC: 5 | RNVC: 2
14 64 06: RNCC: 5 | RNVC: 2

12 Apr 1984

5120-14-040-7351
Socket Wrench Set

140407351
000139003S: RNCC: 3 | RNVC: 2
2135: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-389-2181
Box Wrench

143892181
M20025: RNCC: 3 | RNVC: 2
85-692-3938: RNCC: 6 | RNVC: 9

29 Nov 1983

5120-14-410-3515
Mechanical Puller

144103515
8812230000: RNCC: 3 | RNVC: 2

18 Jun 1986

5120-14-441-6121
Mechanical Puller

144416121
8817300000: RNCC: 3 | RNVC: 2

5 Sep 1990

5120-14-431-2567
Mechanical Puller

144312567
330A93-6301-00: RNCC: 3 | RNVC: 2

12 Apr 1989

5120-14-372-6573
Digging Bar

143726573
152-1000MM: RNCC: 3 | RNVC: 2

21 Sep 1981

5120-14-288-6989
Socket Wrench

142886989
D1553-4834: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-292-3214
Hand Screw Jack

142923214
4864-10T: RNCC: 3 | RNVC: 9

1 Jan 1972

5120-14-392-0906
Mechanical Puller

143920906
853-200-161-0: RNCC: 3 | RNVC: 2

21 Mar 1984

5120-14-218-9649
Socket Wrench

142189649
0117440: RNCC: 3 | RNVC: 2
72-42: RNCC: 5 | RNVC: 2
72.42: RNCC: 5 | RNVC: 2

1 Jan 1965

5120-14-434-7799
Mechanical Puller

144347799
853-290-104-0: RNCC: 3 | RNVC: 2
161820: RNCC: 5 | RNVC: 9

4 Oct 1989

5120-14-379-8424
Seal Inserter

143798424
6803N6784041500: RNCC: 3 | RNVC: 2
68.03.N.67840.41500: RNCC: 5 | RNVC: 2
6803-67840-415-00: RNCC: 5 | RNVC: 2
6803-6784041500: RNCC: 5 | RNVC: 2

20 Oct 1982

5120-14-244-9032
Socket Wrench

142449032
3111212: RNCC: 3 | RNVC: 2
91.8X9: RNCC: 3 | RNVC: 2
91-8X9: RNCC: 5 | RNVC: 2
3148511275207: RNCC: 5 | RNVC: 2
0127520: RNCC: 5 | RNVC: 9
91-8X9-160-6: RNCC: 5 | RNVC: 9
VIR3111212: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-351-9761
Rack Bar Jack

143519761
5490605: RNCC: 3 | RNVC: 9
95494615: RNCC: 5 | RNVC: 2
AY623-0C: RNCC: 5 | RNVC: 2

16 Oct 1978

5120-14-369-7940
Box Wrench

143697940
30AM013-0000005: RNCC: 3 | RNVC: 2

17 Apr 1981

5120-14-488-1374
Socket Wrench

144881374
K7739-7/16X1/2W: RNCC: 3 | RNVC: 2
7/16X1/2W: RNCC: 5 | RNVC: 2

18 Apr 1997

5120-14-441-1534
Wood Mallet

144411534
209.50: RNCC: 3 | RNVC: 2
209-50: RNCC: 5 | RNVC: 2
3148511478004: RNCC: 5 | RNVC: 2
91636484: RNCC: 5 | RNVC: 2
0147800: RNCC: 5 | RNVC: 9

22 Aug 1990

5120-14-515-8807
Lamp Cap Extractor

145158807
21355596-00: RNCC: 3 | RNVC: 2

20 Aug 1999

5120-14-349-0968
Box Wrench

143490968
B0064-014: RNCC: 3 | RNVC: 2

19 Apr 1978

5120-14-227-8074
Socket Wrench

142278074
855SAR0N: RNCC: 3 | RNVC: 2
855: RNCC: 5 | RNVC: 2

1 Jan 1966

5120-14-381-4600
Hand Hammer

143814600
866-28: RNCC: 3 | RNVC: 2

25 Jan 1983

5120-14-432-7094
Seal Inserter

144327094
OUT50165: RNCC: 3 | RNVC: 2
0UT50165: RNCC: 5 | RNVC: 2

21 Jun 1989

5120-14-363-4657
Box Wrench

143634657
W3185M: RNCC: 3 | RNVC: 9

9 May 1980

5120-14-395-0741
Mechanical Puller

143950741
H46691: RNCC: 3 | RNVC: 2

2 Oct 1984

5120-14-352-7151
Mechanical Puller

143527151
00143640: RNCC: 3 | RNVC: 2
VDP7418: RNCC: 5 | RNVC: 2
12-186-1925: RNCC: 6 | RNVC: 9

14 Nov 1978

5120-14-507-0304
Hand Hydraulic Jack

145070304
00035735: RNCC: 3 | RNVC: 2

3 Jun 1998

5120-14-415-8322
Driftpin

144158322
M4Z7133110835: RNCC: 3 | RNVC: 2

21 May 1987

5120-14-210-9833
Socket Wrench

142109833
80-26: RNCC: 3 | RNVC: 2
3107226: RNCC: 3 | RNVC: 2
122-26: RNCC: 3 | RNVC: 9
DEM122-26: RNCC: 5 | RNVC: 9
VIR3107226: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-485-7355
Mechanical Puller

144857355
332A93-3691-00: RNCC: 3 | RNVC: 2

6 Feb 1997

5120-14-543-6893
Socket Wrench

145436893
T257A00T0042: RNCC: 1 | RNVC: 2
SEFCA-99-407-00: RNCC: 3 | RNVC: 2

2 Dec 2004

5120-14-344-8723
Jaw Cable Grip

143448723
SBDS16-20-11SILIC0NE: RNCC: 3 | RNVC: 2
EC66E18-12: RNCC: 3 | RNVC: 9

9 Sep 1977

5120-14-381-1920
Socket Wrench

143811920
NO PRIMARY REF14-381-1920: RNCC: 3 | RNVC: 2
82599901: RNCC: 5 | RNVC: 2
82599901: RNCC: 5 | RNVC: 2

25 Jan 1983

5120-14-547-1041
Mechanical Puller

145471041
888-544-700-1: RNCC: 3 | RNVC: 2

23 Sep 2005

5120-14-287-9092
Hand Rivet Set

142879092
205109: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-515-8923
Mechanical Puller

145158923
5000261504: RNCC: 3 | RNVC: 2

24 Aug 1999

5120-14-279-5887
Ratchet Wrench

142795887
13-62A62TER16: RNCC: 2 | RNVC: 2
2786-16: RNCC: 3 | RNVC: 2
323-10DR0ITEETGAUCHE16: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-399-3354
Box Wrench

143993354
MHC303-28: RNCC: 3 | RNVC: 2
MHC303-28: RNCC: 5 | RNVC: 2

6 Mar 1985

5120-14-525-9453
Socket Wrench

145259453
888-412-300-1: RNCC: 3 | RNVC: 2

20 Jun 2001

5120-14-386-8425
Socket Wrench

143868425
613236B: RNCC: 3 | RNVC: 2
613236B: RNCC: 5 | RNVC: 9
85-692-4370: RNCC: 6 | RNVC: 9

24 Aug 1983

5120-14-503-4286
Mechanical Puller

145034286
853-620-065-0: RNCC: 3 | RNVC: 2

14 Jan 1998

5120-14-352-4142
Socket Wrench

143524142
RT13694: RNCC: 3 | RNVC: 2
85-688-9493: RNCC: 6 | RNVC: 9

16 Oct 1978

5120-14-432-3892
Mechanical Puller

144323892
548538: RNCC: 3 | RNVC: 2
00548538: RNCC: 5 | RNVC: 2

7 Jun 1989

5120-14-531-8844
Driftpin

145318844
T632G3002201: RNCC: 3 | RNVC: 2

25 Sep 2002

5120-14-425-6734
Drill Guide

144256734
800A979100: RNCC: 3 | RNVC: 2

21 Jul 1988

5120-14-237-9825
Mechanical Puller

142379825
DS3004: RNCC: 3 | RNVC: 2
0000330510: RNCC: 5 | RNVC: 2
0000330510: RNCC: 5 | RNVC: 9
330510: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-376-3784
Box Wrench

143763784
042BBMBAREP9: RNCC: 3 | RNVC: 2

30 Mar 1982

5120-14-386-1565
Mechanical Puller

143861565
6801J33-2035-20: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-224-7446
Box Wrench

142247446
65-8X10: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-429-1497
Mechanical Puller

144291497
540980: RNCC: 3 | RNVC: 2

11 Jan 1989

5120-14-541-4052
Socket Wrench

145414052
60702: RNCC: 3 | RNVC: 2

8 Jun 2004

5120-14-387-1921
Driftpin

143871921
STM032-56: RNCC: 3 | RNVC: 2
STM032-56: RNCC: 5 | RNVC: 2

24 Aug 1983

5120-14-520-0835
Mechanical Puller

145200835
540571: RNCC: 3 | RNVC: 2
OU-540571: RNCC: 5 | RNVC: 2
540571: RNCC: 5 | RNVC: 2
OU-540571: RNCC: 5 | RNVC: 2

10 May 2000

5120-14-383-6253
Mechanical Puller

143836253
70353783: RNCC: 3 | RNVC: 2
7035-37-83: RNCC: 5 | RNVC: 9
70353783: RNCC: 5 | RNVC: 9

11 Apr 1983

5120-14-385-0718
Socket Wrench

143850718
92-9-16: RNCC: 3 | RNVC: 2
92 9-16: RNCC: 5 | RNVC: 2

2 Jun 1983

5120-14-477-9825
Seal Inserter

144779825
853-203-202-0: RNCC: 3 | RNVC: 2

4 Oct 1995

5120-14-369-7972
Driftpin

143697972
30AM005-010004: RNCC: 3 | RNVC: 2

17 Apr 1981

5120-14-460-0887
Mechanical Puller

144600887
2562598840: RNCC: 3 | RNVC: 2
25625988-40: RNCC: 5 | RNVC: 2

7 Jan 1993

5120-14-343-8728
Box Wrench

143438728
BB355: RNCC: 3 | RNVC: 9
01417337: RNCC: 5 | RNVC: 2

13 Jul 1977

5120-14-433-3208
Seal Inserter

144333208
853-202-812-0: RNCC: 3 | RNVC: 2

19 Jul 1989

5120-14-542-9444
Stud Inserter

145429444
8030016: RNCC: 3 | RNVC: 2
8030016: RNCC: 5 | RNVC: 2

14 Aug 2004

5120-14-297-4692
Mechanical Puller

142974692
02640018500: RNCC: 3 | RNVC: 2
026400185: RNCC: 5 | RNVC: 2
204780: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-471-5140
Seal Inserter

144715140
7004TE: RNCC: 3 | RNVC: 2
MR630-34-63: RNCC: 5 | RNVC: 2
OUT327004T: RNCC: 5 | RNVC: 2

31 Aug 1994

5120-14-553-7122
Seal Inserter

145537122
6801G31-1647-00: RNCC: 3 | RNVC: 2
68-01-332A31-1647-00: RNCC: 5 | RNVC: 2

14 May 2007

5120-14-366-8470
Driftpin

143668470
30MS087-810FSV: RNCC: 3 | RNVC: 2

20 Nov 1980

5120-14-399-3425
Mechanical Puller

143993425
4601EAV: RNCC: 3 | RNVC: 2

6 Mar 1985

5120-14-354-8996
Mechanical Puller

143548996
D47618: RNCC: 3 | RNVC: 2

20 Feb 1979

5120-14-397-9425
Mechanical Puller

143979425
F117ACM008: RNCC: 3 | RNVC: 2
F117041: RNCC: 5 | RNVC: 2

31 Jan 1985

5120-14-404-7534
Lamp Cap Extractor

144047534
492005: RNCC: 3 | RNVC: 2

20 Nov 1985

5120-14-220-7490
Socket Wrench

142207490
BB232-32: RNCC: 3 | RNVC: 9

1 Jan 1965

5120-14-387-9811
Box Wrench

143879811
853-100-076-0: RNCC: 3 | RNVC: 2

12 Oct 1983

5120-14-432-7056
Seal Inserter

144327056
OUT11761: RNCC: 3 | RNVC: 2
0UT11761: RNCC: 5 | RNVC: 2

21 Jun 1989

5120-14-526-9195
Hand Beading Tool

145269195
8817803000: RNCC: 3 | RNVC: 2

17 Sep 2001

5120-14-303-6314
Box Wrench

143036314
0D2-28: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-524-0704
Socket Wrench

145240704
8030189N00: RNCC: 3 | RNVC: 2

22 Feb 2001

5120-14-317-1841
Socket Wrench

143171841
1715: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-284-6177
Hand Hammer

142846177
BB33: RNCC: 3 | RNVC: 9

1 Jan 1972

5120-14-373-4918
Box Wrench

143734918
29411: RNCC: 3 | RNVC: 2

21 Oct 1981

5120-14-378-4297
Hand Rivet Set

143784297
F47215: RNCC: 3 | RNVC: 2

11 Aug 1982

5120-14-347-9497
Mechanical Puller

143479497
MAS4714: RNCC: 3 | RNVC: 2

29 Mar 1978

5120-14-483-8575
Mechanical Puller

144838575
0-41067-4: RNCC: 3 | RNVC: 2

5 Oct 1996

Load More Results