What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.

A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Blacksmith's Punch?

A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Mechanical Finger?

A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.

A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Screwdriver And Wrench Assembly?

A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Stakeholder Bench Plate?

A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.

What is a Drill Drift?

A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.

A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Digging Bar?

A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

What is a Valve Spring Lifter?

A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.

What is a Fuse Puller?

A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.

Hand Tools, Nonedged, Nonpowered - France (FR)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by France (FR) - NCB is 14

Page 13 of 110

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by France

51	20	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - France (FR)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 16 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Pipe Vise? 19 Items: A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.
What is a Hand Vise? 25 Items: A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.
What is a Hand Hydraulic Jack? 133 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 153 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 903 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 17 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
Swage,Bottom,Blacksmith's 10 Items
What is a Hand Tube Flaring Tool? 23 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Blacksmith's Punch? 12 Items: A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.
What is a Drain Plug Wrench? 45 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 57 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 16 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 3829 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
Flatter,Blacksmith's 18 Items
Swage,Top,Blacksmith's 12 Items
What is a Pipe Wrench? 110 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 149 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 53 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
Screwdriver,Offset 54 Items
What is a Screwdriver Bit? 707 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Mechanical Finger? 25 Items: A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.
What is a Socket Wrench Socket? 1803 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 1412 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 1641 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 52 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 565 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
Jack,Push-Pull,Screw 30 Items
What is a Hand Tube Bender? 54 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 1106 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 55 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pinch Bar? 19 Items: A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.
What is a Pry Bar? 17 Items: A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.
What is a Wrecking Bar? 15 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 273 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 413 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 32 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 295 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
Face,Hammer,Inserted 25 Items
What is a Hole Sheet Metal Holder? 37 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Screwdriver And Wrench Assembly? 11 Items: A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.
What is a Hand Rivet Set? 121 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Stakeholder Bench Plate? 22 Items: A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.
What is a Drill Drift? 32 Items: A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.
What is a Tack Claw? 15 Items: A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.
Mattock 28 Items
What is a Socket Wrench Handle Bar? 108 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Stake,Sheet Metalworking 50 Items
Riveter,Blind,Hand 76 Items
What is a Hand Shovel? 43 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 98 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 30 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
What is a Digging Bar? 20 Items: A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.
Block,Dolly,Sheet Metalworking 56 Items
What is a Piston Ring Compressor? 34 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Valve Spring Lifter? 29 Items: A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.
What is a Fuse Puller? 20 Items: A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.
What is a Hand Lead Seal Press? 18 Items: A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.
What is a Hand Beading Tool? 91 Items: A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.
What is a Hand Hammer? 502 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
Head,Hand Hammer 81 Items
What is a Lamp Extractor? 76 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Tube Packing Ring Installing Tool? 29 Items: A Tube Packing Ring Installing Tool (INSTALLING TOOL,TUBE PACKING RING) is an item designed to insert packing rings on tubes within tube sheets on condensers and similar heat exchangers. In operation, the packing rings are assembled on the loading pin mandrel and are then transferred from the mandrel on to the tube by means of a tubular sleeve which slides on the mandrel.
What is a Carpenters' Pincers? 18 Items: A Carpenters' Pincers (PINCERS,CARPENTERS') is a plierlike hand tool having two opposing jaws which may have hammerlike backs. One handle has a nail or tack pulling claw, the other is shaped to form a screwdriver. The tool may contain a wire cutter. See also NIPPERS, END CUTTING and PINCERS, FARRIERS'.
What is a Trowel? 33 Items: A Trowel is a tool used for bricklaying, concrete work, plastering, linoleum laying, and masonry work. Excludes CORNER TOOL, CONCRETE.
What is a Hand Abrasive Wheel Dresser? 12 Items: A Hand Abrasive Wheel Dresser (DRESSER,ABRASIVE WHEEL,HAND) is a tool designed to remove glaze from, dress, shape, sharpen, and true solid abrasive wheels. Excludes NIB, DIAMOND, WHEEL DRESSING.
What is a Lamp Cap Extractor? 32 Items: A Lamp Cap Extractor (EXTRACTOR,LAMP CAP) is a tool specifically designed to facilitate the removal of lamp caps from switchboards, panels or indicator lamps.
What is a Rivet Bucking Bar? 51 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 86 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 277 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Woven Cable Grip? 23 Items: A Woven Cable Grip (GRIP,CABLE,WOVEN) is a braided wire device designed to clutch a bare or insulated conductor, cable or wire rope, for holding taut or drawing through conduit.
What is a Screw Thread Insert Extractor? 19 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is an Electron Tube Extractor? 18 Items: An Electron Tube Extractor (EXTRACTOR,ELECTRON TUBE) is a hand tool designed to facilitate the removal of electron tubes from electronic equipment and to avoid burning the fingers. It may be used for installing tubes.
What is a Cross Tip Screwdriver? 362 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 21 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 11 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 37 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Tool Handle Wedge? 10 Items: A Tool Handle Wedge (WEDGE,TOOL HANDLE) is excludes WEDGE, WOOD.
What is a Marlinespike? 16 Items: A Marlinespike is a metal hand tool made in the shape of a tapered pin. One end is pointed and the opposite end may be headed. The body may contain an eye for a lanyard sling, or be grooved lengthwise. Excludes CABLE PICK and FID.
What is an Aligning Punch? 272 Items: An Aligning Punch (PUNCH,ALIGNING) is a round, square, hexagonal or octagonal bodied hand tool, having a round tapered section 6-1/2 inches (165.1 mm) or more in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, DRIFT and DRIFTPIN.
What is a Drift Punch? 25 Items: A Drift Punch (PUNCH,DRIFT) is a round, square, hexagonal, or octagonal bodied hand tool, having a round tapered section 4 to 6 inches (101.6 mm to 152.4 mm) inclusive in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, ALIGNING; and DRIFTPIN.
What is a Putty Knife? 36 Items: A Putty Knife (KNIFE,PUTTY) is a hand tool with a nonedged blade fixed to a handle for laying on and smoothing putty and the like.
What is a Socket Wrench Adapter-Extension? 40 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 30 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 184 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Socket Wrench Ratchet Attachment? 47 Items: A Socket Wrench Ratchet Attachment (RATCHET ATTACHMENT,SOCKET WRENCH) is a connection for socket wrenches and handles. Consists of a ratcheting mechanism with an internal drive on one end and an external drive on the opposite end of the same size. The item is designed to permit continuous rotation of the socket in one direction without removing the socket or handle and without a complete rotation of the handle.
What is a Wrench Extension Handle? 81 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Socket Wrench Crowfoot Attachment? 155 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 33 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 43 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 48 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 2394 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 372 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 300 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 661 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 32 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand-Operated Grommet And Eyelet Press? 12 Items: A Hand-Operated Grommet And Eyelet Press (PRESS,GROMMET AND EYELET,HAND-OPERATED) is a device which punches or pierces holes and in addition fastens or sets eyelets and grommets in cloth, paper and similar material. May be used for fastening or setting rivets, lacing hooks and snaps in cloth, paper and similar material. It is hand operated by lever or screw action. See also PUNCH, EYELET, PLIER TYPE and PRESS, GROMMET AND EYELET, FOOT OPERATED.
What is a Claw Bar? 19 Items: A Claw Bar (BAR,CLAW) is before using, refer to Reference Drawing Group AG.
What is a Shock Type Wheel Stud Nut Wrench? 11 Items: A Shock Type Wheel Stud Nut Wrench (WRENCH,WHEEL STUD NUT,SHOCK TYPE) is a manually operated item designed to remove wheel stud nuts. In operation the inner nut is turned by a socket attached to a shaft on which is a loose swinging weighted handle. The weighted handle may be swung quickly to provide an impact force against the socket to loosen the seized or jammed nuts. The outer nut is held stationary by a separate hexagonal holding wrench.
What is a Drift Pin Set? 30 Items: A Drift Pin Set is a group of DRIFTPIN having different characteristics.
What is a Tire Iron? 25 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 115 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Blacksmith's Vise? 14 Items: A Blacksmith's Vise (VISE,BLACKSMITH'S) is a clamping device consisting of a mounting plate, one stationary and one manual screw actuated jaw and a supporting member extending downward from the stationary jaw to the floor. Designed to be mounted on a bench, table or the like. May include pipe holding jaws.
What is a Machinist's Vise? 64 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Clamp Base Bench Vise? 10 Items: A Clamp Base Bench Vise (VISE,BENCH,CLAMP BASE) is a clamping device consisting of a base, one stationary and one manual screw actuated jaw, and one or more guide bars or rods. Designed with an integral clamp for attaching to a bench, table, or the like. Does not include pipe holding jaws.
What is a Fixed Open End Wrench Set? 86 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Nail Set? 11 Items: A Nail Set is a round knurled, square, hexagonal or octagonal bodied hand tool having a round tapered section terminating in a cupped point. It is designed to set brad head nails below the surface by striking it a hammerlike blow. See also PUNCH, DRIVE PIN.
What is a Socket Wrench Set? 202 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is an Open End Box Wrench Set? 10 Items: An Open End Box Wrench Set (WRENCH SET,OPEN END BOX) is a group of WRENCH, OPEN END BOX having different characteristics.
What is a Combination Box And Open End Wrench Set? 72 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Box Wrench Set? 36 Items: A Box Wrench Set (WRENCH SET,BOX) is a group of box wrenches having different characteristics. It may include a HANDLE, EXTENSION WRENCH. See also WRENCH SET, COMBINATION, BOX AND OPEN END.
What is a Hot Line Stick? 26 Items: A Hot Line Stick is a hand tool consisting of a straight, round stick (pole) made of a suitable nonconductive material with a tool fixed to one end. The other end may be plain or have a butt mounting device fixed to it. Various types of attachments (hooks, rings, and bands) may be fixed to the body. It is designed for use in the repair and maintenance of live high voltage aerial lines. Excludes hot line sticks without heads.
Handle,Mattock-Pick 15 Items
What is a Wrench Kit? 73 Items: A Wrench Kit is an assortment of various types and sizes of wrenches such as SOCKET, SOCKET WRENCH; WRENCH, OPEN END, FIXED; WRENCH, BOX and the like. It may include adapter(s), ratchet(s) and the like. See also WRENCH SET (as modified.
What is a Brad Awl? 15 Items: A Brad Awl (AWL,BRAD) is a small, pointed tool used by shoemakers, saddlers, cabinetmakers, and the like for piercing small holes in wood, leather, and similar materials, and consists of a handle with a ferrule and a blade. The blade is round, terminating in a beveled, sharp straight edge and has a shank which passes through the center of the handle.
What is a Scratch Awl? 20 Items: A Scratch Awl (AWL,SCRATCH) is an item whose nominal length of blade is less than 4 inches (101.6 millimeters) and is provided with a nondetachable handle.
What is a Screw Extractor Set? 10 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 102 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
Jack,Scissors,Hand 26 Items
What is a Piston Ring Expander? 23 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
Mallet,Plastic 62 Items
Mallet,Rubber 10 Items
What is a Wood Mallet? 37 Items: A Wood Mallet (MALLET,WOOD) is excludes MALLET, CALKING; MALLET, HAWSING and MALLET, SERVING.
What is a Rack Bar Jack? 30 Items: A Rack Bar Jack (JACK,RACK BAR) is excludes JACK, BUMPER and JACK, REEL, HAND.
What is a Pneumatic Tire Valve Core Inserter And Remover? 14 Items: A Pneumatic Tire Valve Core Inserter And Remover (INSERTER AND REMOVER,PNEUMATIC TIRE VALVE CORE) is a bar of steel having a small cylindrical slotted end for removing or installing a valve core in a valve stem by a screwing motion. See also REPAIR TOOL, PNEUMATIC TIRE VALVE.
What is a Hand Tube Swaging Tool Kit? 20 Items: A Hand Tube Swaging Tool Kit (SWAGING TOOL KIT,TUBE,HAND) is a hand-operated noncutting tool consisting of one or more PUNCH, TUBE SWAGING, HAND and a tube flaring bar.
What is a Hand Tube Flaring Punch? 11 Items: A Hand Tube Flaring Punch (PUNCH,TUBE FLARING,HAND) is a noncutting tool having a shaped end or section designed to flare the ends of tubes. One type is designed to flare the ends of tubes against a tube sheet, and another to flare tube ends to mate with tube fittings. Includes punch components of FLARING TOOL, TUBE, HAND.
What is a Hose Strap Band Clamping Tool? 26 Items: A Hose Strap Band Clamping Tool (CLAMPING TOOL,STRAP BAND,HOSE) is an item designed to tension and lock metal straps around a rubber hose, and the like. It is also used to clamp and hold fittings therein.
What is a Mechanical Puller? 3073 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 470 Items
What is a Slip Joint Pliers? 84 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Brake Repair Pliers? 14 Items: A Brake Repair Pliers (PLIERS,BRAKE REPAIR) is a tool having jaws designed for use in brake repair operations, such as removing and replacing items such as keys, springs, and the like. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 226 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 12 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 81 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 56 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 15 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 11 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 29 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Cross Tip Screwdriver Set? 14 Items: A Cross Tip Screwdriver Set (SCREWDRIVER SET,CROSS TIP) is a group of SCREWDRIVER, CROSS TIP having different characteristics.
What is a Spanner Wrench Set? 18 Items: A Spanner Wrench Set (WRENCH SET,SPANNER) is a group of items under WRENCH, SPANNER having different characteristics.
What is a Drive Pin Punch Set? 31 Items: A Drive Pin Punch Set (PUNCH SET,DRIVE PIN) is a group of PUNCH, DRIVE PIN having different characteristics.
What is an Aligning Punch Set? 13 Items: An Aligning Punch Set (PUNCH SET,ALIGNING) is a group of PUNCH, ALIGNING having different characteristics. See also DRIFTPIN SET.
What is a Slugging Type Box Wrench Socket? 16 Items: A Slugging Type Box Wrench Socket (SOCKET,SLUGGING TYPE BOX WRENCH) is an item having a hexagonal external drive at one end, made to fit into the internal hexagonal or 12-point opening of a slugging type box wrench. The opposite end has a single-broached hexagonal opening of the same size as the external drive. The item is designed with extra thick walls to withstand the impact of sledge blows on the driving wrench.
What is a Mechanical Puller Step Plate? 44 Items: A Mechanical Puller Step Plate (STEP PLATE,MECHANICAL PULLER) is a circular disk, flanged to provide a shoulder, and designed to provide a base for the screw point of a PULLER, MECHANICAL when pulling externally mounted bearings, gears, and the like from hollow shafts or housings. It has a concentric, countersunk hole to accommodate the puller screw point.
What is a Solid Center Punch? 79 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Cable Type Ratchet Lever Puller? 20 Items: A Cable Type Ratchet Lever Puller (PULLER,RATCHET LEVER,CABLE TYPE) is an item consisting of a metal frame and ratchet lever reel to which is attached one end of a flexible cable (wire rope). The cable feeds through the fast eye in the metal frame, and may be reeved through a slip hook tackle hook. See also BINDER, LOAD; HOIST, WIRE ROPE and STRETCHER, WIRE.
What is an Electronic Equipment Tuning Wand? 18 Items: An Electronic Equipment Tuning Wand (TUNING WAND,ELECTRONIC EQUIPMENT) is a hand-held rod used in determining the adjustment of the windings of a radio frequency coil. It is made of insulating material with iron on one end and brass on the other end. By inserting the iron end in the coil, the inductance is increased and by inserting the brass end, the inductance is decreased.
What is a Combination Open End And Spanner Wrench? 14 Items: A Combination Open End And Spanner Wrench (WRENCH,OPEN END AND SPANNER,COMBINATION) is a tool having open end wrench characteristics at one end and spanner wrench features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s) at the other end.
What is a Detent Handling Tool? 187 Items: A Detent Handling Tool (HANDLING TOOL,DETENT) is a specially designed handling tool consisting of a rigid bar with a T-handle on one end. The other end is equipped with threads designed to mate the threads of a detent to facilitate inserting or extracting.
What is a Hand Material Handling Hook? 23 Items: A Hand Material Handling Hook (HOOK,MATERIAL HANDLING,HAND) is a hook whose curved end conforms to Style AP1, AP2, AP3 or AP4 of Reference Drawing Group AP. Excludes HOOK, MANHOLE COVER, HAND; HOOK, WIRE BREAKING, HAND; HOOK, ROCK CRUSHER FEEDING, HAND; HOOK, STRAINER REMOVING, HAND and HOOKS, BAG HANDLING, HAND.
What is a Magnetic Retrieving Tool? 11 Items: A Magnetic Retrieving Tool (RETRIEVING TOOL,MAGNETIC) is a hand-operated magnetic device used to locate and pick up metallic articles, such as bolts, nuts, pins, washers, and the like, in confined spaces. It may be rigid, flexible or adjustable. Excludes FINGER, MECHANICAL.
What is a Mechanical Puller Adapter? 78 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Combination Box And Open End Box Wrench? 13 Items: A Combination Box And Open End Box Wrench (WRENCH,BOX AND OPEN END BOX,COMBINATION) is a double end wrench, box and open end box, primarily designed for removing or replacing tube fittings. The opening in the open end box may be machined at an angle from the longitudinal center line of the wrench.
What is a Screw Thread Insert Inserter? 136 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Flat Tip Screwdriver Set? 48 Items: A Flat Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP) is a group of SCREWDRIVER, FLAT TIP having different characteristics.
What is a Terminal Crimping Tool Contact Positioner? 89 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 16 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is an Adjustable Wrench? 138 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 239 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 75 Items
Handle,Shovel 10 Items
What is a Socket Wrench Spanner Attachment? 88 Items: A Socket Wrench Spanner Attachment (SPANNER ATTACHMENT,SOCKET WRENCH) is an item having an adjustable or fixed span with pin, hook, or key type end that is used to fit and turn various size retaining rings, cover plates, plugs, couplings, and like parts. Usually designed to be driven by a male driver.
What is a Retaining Ring Installation Tool? 44 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Tacker? 16 Items: A Tacker is a hand-operated, hammerlike or gunlike item without a clincher, used to drive preformed connecting elements like pins, nails or staples through one object or piece of material into another. Excludes STAPLER (as modified).
What is a Bearing And Bushing Inserter? 290 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 207 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 939 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 14 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 93 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 161 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 94 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 141 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 53 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Six Point Tip Screwdriver? 155 Items: A Six Point Tip Screwdriver (SCREWDRIVER,SIX POINT TIP) is a manual screwdriver having a single nonremoveable blade having a tip with six rounded points.
What is a Seal Inserter And Remover? 147 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 478 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is a Preformed Packing Inserter And Remover? 34 Items: A Preformed Packing Inserter And Remover (INSERTER AND REMOVER,PREFORMED PACKING) is a hand tool designed to install and remove a PACKING, PREFORMED.
What is a Pin Remover? 34 Items: A Pin Remover (REMOVER,PIN) is a hand tool designed to facilitate the removal of a pin from a hole.
What is a Pin Inserter And Remover? 13 Items: A Pin Inserter And Remover (INSERTER AND REMOVER,PIN) is a rodlike tool designed to facilitate the insertion and removal of a pin from a hole.
What is an Electrical Contact Inserter And Remover? 37 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Piston Inserter? 40 Items: A Piston Inserter (INSERTER,PISTON) is a tool designed to permit installation of a piston or piston assembly without damaging the packings or piston.
What is a Spring Inserter And Remover? 85 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 13 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Stud Inserter? 22 Items: A Stud Inserter (INSERTER,STUD) is a device designed to drive in studs. It does not have any facilities for removing or extracting studs. See also INSERTER AND REMOVER, STUD.
What is a Stud Inserter And Remover? 17 Items: A Stud Inserter And Remover (INSERTER AND REMOVER,STUD) is a group of items designed to extract and to drive studs. It may include collets, guides, housings, holders and the like. See also REMOVER SET, STUD and INSERTER, STUD.
What is a Gear Inserter? 54 Items: A Gear Inserter (INSERTER,GEAR) is a hand tool designed to install various gears onto a gearshaft. It may be operated by a pushing or a striking force.
What is a Crimping Tool Die? 73 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is an Electrical Connector Inserter? 45 Items: An Electrical Connector Inserter (INSERTER,ELECTRICAL CONNECTOR) is a hand tool designed to hold an electrical connector, and to assist in the positioning and installation of the connector on a cover, panel or the like.
What is a Float? 12 Items: A Float is a tool used for concrete, plastering and grouting work.
What is a Mechanical Puller Set? 19 Items: A Mechanical Puller Set (PULLER SET,MECHANICAL) is two or more separate PULLER, MECHANICAL of different fixed sizes.
What is a Lifting Pneumatic Bag? 11 Items: A Lifting Pneumatic Bag (PNEUMATIC BAG,LIFTING) is a device made of flexible material designed to lift another item by being placed under the item and being inflated with air or some other gas. It will have a means of being connected to an air or gas source and may include a connector hose, a control valve and/or a pressure regulator.
What is a Cable Tie Installation Tool? 22 Items: A Cable Tie Installation Tool (INSTALLATION TOOL,CABLE TIE) is a lightweight, hand-held, hand-operated tool designed to fasten cable ties, straps and the like. Cable tie is inserted into the nose of the tool flush to the cable tie head. Trigger handle tightens cable tie and cuts off any excess. These installation tools are available in a variety of sizes depending on their intended use with miniature, intermediate, standard, heavy or extra heavy cross section ties.
What is a Bearing Staking Installation Tool? 159 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
Wrench Set,Ratchet 15 Items
What is a Sealant Dispenser? 26 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Retaining Ring Pliers Set? 10 Items: A Retaining Ring Pliers Set (PLIERS SET,RETAINING RING) is a group of PLIERS, RETAINING RING having different characteristics.
What is a Hand Armament Subsystem Carrier? 52 Items: A Hand Armament Subsystem Carrier (CARRIER,ARMAMENT SUBSYSTEM,HAND) is a metallic item with a clamp device and/or space for depositing articles. It is used for transporting weapon parts during maintanence and/or repair work, such as gun barrel, automatic loader, breechblock and the like.
What is a Ring Retaining Pliers Tip Set? 13 Items: A Ring Retaining Pliers Tip Set (TIP SET,PLIERS,RING RETAINING) is a collection of removable metallic tips in matched pairs used to provide various size capablities to PLIERS, RING RETAINING which permits the removal and installation of internal and external retaining rings.
What is a Plug Electrical Connector Extractor? 45 Items: A Plug Electrical Connector Extractor (EXTRACTOR,ELECTRICAL CONNECTOR,PLUG) is a hand tool designed to disassemble CONNECTOR, PLUG, ELECTRICAL from a CONNECTOR, RECEPTACLE, ELECTRICAL.
What is a Torque Wrench Adapter Set? 10 Items: A Torque Wrench Adapter Set (ADAPTER SET,TORQUE WRENCH) is tWO or more ADAPTER, TORQUE WRENCH of different sizes.
What is an Electronic Component Inserter And Remover? 79 Items: An Electronic Component Inserter And Remover (INSERTER AND REMOVER,ELECTRONIC COMPONENT) is an item which can insert or remove an electronic component package such as MICROCIRCUIT; RESISTOR, NETWORK (as modified); and the like from its mounting position or socket. Excludes INSERTER AND REMOVER, ELECTRICAL CONTACT; REMOVER, ELECTRICAL CONTACT; EXTRACTOR, ELECTRICAL CARD; EXTRACTOR, ELECTRONIC CRYSTAL UNIT; EXTRACTOR, ELECTRON TUBE.
What is an Impact Type Bit Set And Handle Screwdriver? 14 Items: An Impact Type Bit Set And Handle Screwdriver (SCREWDRIVER,BIT SET AND HANDLE,IMPACT TYPE) is an item consisting of a set of screwdriver bits and a impact driver to accommodate the bits of various types and characteristics. It is designed to transmit a strong rotating movement by the impact of a hammer blowed on the impact driver. It is used to loosen rusted or seized screws. Excludes SCREWDRIVER, BIT SET AND HANDLE.
What is a Hand Vise Jaw? 19 Items: A Hand Vise Jaw (JAW,VISE,HAND) is an item consisting of two opposing parts of a VISE, HAND. The item is moveable and able to open and close. It can hold, grasp or clamp work.
What is a Screwdriver Handle? 28 Items: A Screwdriver Handle (HANDLE,SCREWDRIVER) is an item used to accommodate various types of BIT, SCREWDRIVER. It is designed to rotate a bit that is used for installing or removing screws.
What is a Wire Twister Pliers? 25 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 284 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is a Mechanical Puller Body? 45 Items: A Mechanical Puller Body (BODY,PULLER,MECHANICAL) is an item designed to support and enclose the internal parts of a PULLER,MECHANICAL.
What is a Flat Tip And Cross Tip Screwdriver Set? 39 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is a Socket Wrench Screwdriver Attachment Set? 22 Items: A Socket Wrench Screwdriver Attachment Set (SCREWDRIVER ATTACHMENT SET,SOCKET WRENCH) is a set of screwdriver attachment, socket wrench of different sizes. Items consist of a female square drive on one end to attach to a handle, socket wrench and various screwdriver tip configurations on the opposite end. Excludes SCREWDRIVER ATTACHMENT,SOCKET WRENCH
What is an Oil Filter Wrench? 44 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 430 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Communications Equipment Spring Adjuster? 13 Items: A Communications Equipment Spring Adjuster (ADJUSTER,SPRING,COMMUNICATIONS EQUIPMENT) is a single or double end tool, equipped with slot(s) of various dimensions or with cylindrical rod(s), used for adjusting the springs or spring tensioned parts of electronic equipment.
What is a Rotating Members Aligning Tool? 32 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
What is a Final Drive Assembly Alignment Pin? 41 Items: A Final Drive Assembly Alignment Pin (ALIGNMENT PIN,FINAL DRIVE ASSEMBLY) is a special designed pin used in the assembling of the final drive.
Arm,Handling Tool 77 Items
What is a Splicing Sleeve Compressing Tool? 23 Items: A Splicing Sleeve Compressing Tool (COMPRESSING TOOL,SPLICING SLEEVE) is a hand tool having hinged leverage handles similar to a CUTTER, BOLT or pliers, designed to compress a splicing sleeve when joining the ends of two conductors, or when forming an eye splice in the end of a wire rope. Excludes CRIMPING TOOL, TERMINAL, HAND.
What is a Hand Screw Jack Extension? 14 Items: A Hand Screw Jack Extension (EXTENSION,HAND SCREW JACK) is a length of externally threaded rigid shafting which is the adjustable section of a JACK, SCREW, HAND.
What is a Mechanical Puller Gear Adapter? 21 Items: A Mechanical Puller Gear Adapter (GEAR ADAPTER,PULLER,MECHANICAL) is an adapter that adapts a PULLER,MECHANICAL, to pull a certain gear.
Handle,Hydraulic Jack 18 Items
What is a Female Electrical Contact Resizing Tool? 11 Items: A Female Electrical Contact Resizing Tool (RESIZING TOOL,FEMALE ELECTRICAL CONTACT) is a tool designed to shape to a specific size, female contacts such as those used on electrical connectors, tube sockets, crystal sockets, and pin jacks.
What is a Screwdriver And Socket Wrench Combination? 13 Items: A Screwdriver And Socket Wrench Combination is a hand-tool formed into an integral unit with a socket wrench at one end and a screwdriver bit at the other end. See also SCREWDRIVER AND WRENCH ASSEMBLY.
What is a Hand Hose Fitting Swaging Tool Kit? 11 Items: A Hand Hose Fitting Swaging Tool Kit (SWAGING TOOL KIT,HOSE FITTING,HAND) is a device, hydraulically actuated by hand or power operated pump, consisting of face plate, adapter plate, finger cages, fingers, ram, bushing, and expanding mandrels combined on a single base in various functional arrangements. It is used for swaging the outside diameter of hose assembly fittings, expanding the inside diameter of hose assemblies, and securing the fabrication of hose assemblies. Included are a hand or power operated pump, lubricant, cases, and trays.
What is a Catch Lever Tool? 12 Items: A Catch Lever Tool (LEVER TOOL,CATCH) is a specially designed hand tool which engages the opening and closing lever of a CATCH (as modified) for ease of operation. It is constructed of thin rigid material, usually flat, and one end has an engaging tongue.
What is a Manual Impact Wrench? 11 Items: A Manual Impact Wrench (WRENCH,IMPACT,MANUAL) is a manually operated handheld tool consisting of spring-loaded handle and a power-impact head which delivers a torsional impact from either continuous movement of the handle in one direction, or by a reciprocating action. It is used in tightening and loosening fasteners, such as bolts, nuts, and the like. The item may include sockets, extensions and offset fittings, nut runners, and the like.
What is a Drift? 63 Items: A Drift is an item consisting of a tubular body fitted with replaceable tips. It is designed to insert or remove mechanical components where space is restricted.
What is a Nutdriver? 46 Items: A Nutdriver is a non-powered hand tool with a screwdriver style handle, shaft and formed female hex or square socket at driving end.
What is a Locking Device Removal Tool? 12 Items: A Locking Device Removal Tool (REMOVAL TOOL,LOCKING DEVICE) is a hand tool designed to facilitate the removal of a WASHER, KEY and a LOCKING PLATE, NUT AND BOLT.
What is a Hydraulic Fitting Crimping Tool Head? 26 Items: A Hydraulic Fitting Crimping Tool Head (HEAD,CRIMPING TOOL,HYDRAULIC FITTING) is a component of a crimping tool used to compress fittings on fluid tubes. It consists of a U-shape item, in which, are mounted different sizes of DIE, CRIMPING TOOL for tubes of various diameters.
What is a Torque Screwdriver? 11 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.
What is a Special Purpose Combination Wrench? 13 Items: A Special Purpose Combination Wrench (WRENCH,COMBINATION,SPECIAL PURPOSE) is a tool having a combination of ends and facets. The ends may have open end, box or spanner characteristics. The sides may have features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s). Designed to fit specific items, not sized as standard or metric.
What is a Screwdriver Bit Holder? 56 Items: A Screwdriver Bit Holder (HOLDER,SCREWDRIVER BIT) is an attachment with a socket end for accepting male hexagon shank insert bits and a drive end for adapting to a portable power or hand tool.
What is a Telescoping Pole? 16 Items: A Telescoping Pole (POLE,TELESCOPING) is an item which is designed to be extended or compressed by the sliding of overlapping sections. This item may or may not be able to accommodate an extension.

Stock Items From Supply Class 5120 Page 13 of 110

5120-14-434-3258
Seal Inserter

144343258
EMH141378AQ: RNCC: 3 | RNVC: 2
EMH141378AQ: RNCC: 5 | RNVC: 9

20 Sep 1989

5120-14-316-4998
Mechanical Puller

143164998
0U50127: RNCC: 3 | RNVC: 2
50127: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-449-4447
Box Wrench

144494447
57.15X17: RNCC: 3 | RNVC: 2
3148511133705: RNCC: 5 | RNVC: 2
0113370: RNCC: 5 | RNVC: 9

19 Aug 1991

5120-14-376-3786
Box Wrench

143763786
042BBMBAREP11: RNCC: 3 | RNVC: 2

30 Mar 1982

5120-14-385-0669
Mechanical Puller

143850669
600403185: RNCC: 3 | RNVC: 2
SY2103C: RNCC: 5 | RNVC: 2
600403185: RNCC: 5 | RNVC: 9
SY2103C: RNCC: 5 | RNVC: 9

2 Jun 1983

5120-14-551-1638
Putty Knife

145511638
450: RNCC: 3 | RNVC: 2

30 Aug 2006

5120-14-528-3754
Mechanical Puller

145283754
482: RNCC: 3 | RNVC: 2

24 Jan 2002

5120-14-402-2386
Mechanical Puller

144022386
35176: RNCC: 3 | RNVC: 2

26 Jun 1985

5120-14-292-3217
Hand Hydraulic Jack

142923217
KP: RNCC: 3 | RNVC: 9
RASKP: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-257-2904
Mechanical Puller

142572904
FH152-908: RNCC: 3 | RNVC: 2

1 Jan 1969

5120-14-329-6308
Box Wrench

143296308
M31-010: RNCC: 3 | RNVC: 2
M31-010: RNCC: 5 | RNVC: 9

2 Jul 1975

5120-14-438-5092
Seal Inserter

144385092
NO PRIMARY REF14-438-5092: RNCC: 3 | RNVC: 2
589958: RNCC: 5 | RNVC: 9
85-694-1096: RNCC: 6 | RNVC: 9

21 Mar 1990

5120-14-257-2908
Mechanical Puller

142572908
FH152-911: RNCC: 3 | RNVC: 2

1 Jan 1969

5120-14-363-5820
Box Wrench

143635820
C1000.12: RNCC: 3 | RNVC: 2
6630-00-012: RNCC: 3 | RNVC: 2
6630-00-12: RNCC: 5 | RNVC: 2
6630-00-012: RNCC: 5 | RNVC: 9
6630-00-12: RNCC: 5 | RNVC: 9

9 May 1980

5120-14-263-7953
Mechanical Puller

142637953
NO PRIMARY REF14-263-7953: RNCC: 3 | RNVC: 2
52444REPBCD: RNCC: 5 | RNVC: 9

1 Jan 1970

5120-14-407-2057
Seal Inserter

144072057
101664: RNCC: 3 | RNVC: 2

12 Feb 1986

5120-14-504-7422
Aligning Punch

145047422
7524975: RNCC: 3 | RNVC: 2
5001014852: RNCC: 3 | RNVC: 2

3 Mar 1998

5120-14-281-7606
Mechanical Puller

142817606
A121266: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-548-6399
Mechanical Puller

145486399
U21815000: RNCC: 3 | RNVC: 2

27 Jan 2006

5120-14-325-0296
Mechanical Puller

143250296
0S21545A: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-465-9337
Mechanical Puller

144659337
24545906500: RNCC: 3 | RNVC: 2

19 Oct 1993

5120-14-478-8999
Mechanical Puller

144788999
1113013Q00: RNCC: 3 | RNVC: 2

30 Nov 1995

5120-14-316-4996
Mechanical Puller

143164996
0U50125: RNCC: 3 | RNVC: 2
50125: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-540-7906
Blacksmiths' Tongs

145407906
TENFORGEMV400: RNCC: 3 | RNVC: 2

23 Apr 2004

5120-14-313-7240
Mechanical Puller

143137240
C47055: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-272-4050
Box Wrench

142724050
100-1 1-8X1 1-4: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-545-2103
Torque Handle

145452103
PW2625: RNCC: 3 | RNVC: 2

24 Mar 2005

5120-14-547-8039
Mechanical Puller

145478039
DM.37: RNCC: 3 | RNVC: 2

15 Nov 2005

5120-14-384-4592
Mechanical Puller

143844592
0288923: RNCC: 3 | RNVC: 2

4 May 1983

5120-14-425-9251
Drill Guide

144259251
600105: RNCC: 3 | RNVC: 2

28 Jul 1988

5120-14-520-7055
Hand Rivet Set

145207055
AT105A-1-8AN470: RNCC: 3 | RNVC: 2

5 Jun 2000

5120-14-401-5658
Mechanical Puller

144015658
355A93-3540-00: RNCC: 3 | RNVC: 2

13 Jun 1985

5120-14-357-4319
Socket Wrench

143574319
7237CLEDE6MM: RNCC: 3 | RNVC: 2
XCELITE99-6MM: RNCC: 5 | RNVC: 9

7 Jun 1979

5120-14-482-0321
Seal Inserter

144820321
580059A: RNCC: 3 | RNVC: 2

13 Jun 1996

5120-14-359-7563
Mechanical Puller

143597563
A132468-1: RNCC: 3 | RNVC: 2
100374: RNCC: 5 | RNVC: 2
A132468-1: RNCC: 5 | RNVC: 2

15 Oct 1979

5120-14-425-9509
Aligning Punch

144259509
500246FTH20R2: RNCC: 3 | RNVC: 2

28 Jul 1988

5120-14-317-0375
Mechanical Puller

143170375
RT4753: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-540-7830
Mechanical Puller

145407830
604267: RNCC: 3 | RNVC: 2

23 Apr 2004

5120-14-275-8940
Trowel

142758940
E75111A220: RNCC: 2 | RNVC: 2
2695 941 022: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-410-5968
Seal Inserter

144105968
006331670P: RNCC: 3 | RNVC: 2

9 Jul 1986

5120-14-441-2316
Mechanical Puller

144412316
6805V32-2444-20: RNCC: 3 | RNVC: 2

22 Aug 1990

5120-14-485-0958
Sealant Dispenser

144850958
P2218300: RNCC: 3 | RNVC: 2
850-6: RNCC: 5 | RNVC: 2
221830: RNCC: 5 | RNVC: 2
850-6: RNCC: 5 | RNVC: 2

7 Jan 1997

5120-14-458-3093
Drive Pin Punch

144583093
45056131: RNCC: 3 | RNVC: 2
45056131: RNCC: 5 | RNVC: 9

15 Oct 1992

5120-14-525-5676
Catch Lever Tool

145255676
9B11260: RNCC: 3 | RNVC: 2
8014085Y00: RNCC: 5 | RNVC: 2

14 Jun 2001

5120-14-433-4002
Mechanical Puller

144334002
0427810G00: RNCC: 3 | RNVC: 2

25 Jul 1989

5120-14-446-7174
Seal Inserter

144467174
60915282: RNCC: 3 | RNVC: 2
89280531: RNCC: 5 | RNVC: 2

9 Apr 1991

5120-14-347-9500
Mechanical Puller

143479500
MAS4707: RNCC: 3 | RNVC: 2

29 Mar 1978

5120-14-540-8524
Trowel

145408524
6002220101: RNCC: 3 | RNVC: 2
3303806002160: RNCC: 5 | RNVC: 2

23 Apr 2004

5120-14-455-0073
Hand Rivet Set

144550073
853-600-348-6: RNCC: 3 | RNVC: 2

1 May 1992

5120-14-250-6457
Open End Box Wrench

142506457
552-000MA316DET21: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-372-7062
Mechanical Puller

143727062
1500-121E12-152-00-1: RNCC: 3 | RNVC: 2

21 Sep 1981

5120-14-385-3444
Gear Inserter

143853444
6803P32-4129-00: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-309-7472
Driftpin

143097472
341A98-2042-20: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-393-1582
Box Wrench

143931582
35-14X17: RNCC: 3 | RNVC: 2

12 Apr 1984

5120-14-410-3847
Hand Hammer

144103847
240-50X50EMMANCH: RNCC: 3 | RNVC: 2

18 Jun 1986

5120-14-277-3509
Hand Screw Jack

142773509
8810394000: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-268-8396
Wood Caulking Iron

142688396
12-9D0UBLE: RNCC: 2 | RNVC: 2

1 Jan 1970

5120-14-297-4798
Socket Wrench Set

142974798
SK.452U: RNCC: 3 | RNVC: 2
3148515179204: RNCC: 5 | RNVC: 2
SK452U: RNCC: 5 | RNVC: 2
0517920: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-540-8514
Hand Hammer

145408514
0100100201: RNCC: 3 | RNVC: 2
3303800100022: RNCC: 5 | RNVC: 2

23 Apr 2004

5120-14-278-0775
Socket Wrench Set

142780775
66.JE9T: RNCC: 3 | RNVC: 2
3148515315305: RNCC: 5 | RNVC: 2
0531530: RNCC: 5 | RNVC: 9
66JE8T: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-532-1110
Seal Inserter

145321110
N673301GC126: RNCC: 3 | RNVC: 2

9 Oct 2002

5120-14-425-9575
Aligning Punch

144259575
502188STH20R2: RNCC: 3 | RNVC: 2

28 Jul 1988

5120-14-201-7001
Socket Wrench

142017001
42-14X14H: RNCC: 3 | RNVC: 2

1 Jan 1962

5120-14-393-0499
Mechanical Puller

143930499
NC5-8-11-1-1-2: RNCC: 3 | RNVC: 9
89232668: RNCC: 5 | RNVC: 2

12 Apr 1984

5120-14-539-5316
Hand Hammer

145395316
0136310201: RNCC: 3 | RNVC: 2
136-OC: RNCC: 5 | RNVC: 2
363102: RNCC: 5 | RNVC: 2

22 Jan 2004

5120-14-366-7045
Socket Wrench Set

143667045
J.450U: RNCC: 3 | RNVC: 2
0965 12 160: RNCC: 5 | RNVC: 2
3148515048609: RNCC: 5 | RNVC: 2
J450U: RNCC: 5 | RNVC: 2
0504860: RNCC: 5 | RNVC: 9
85-691-4438: RNCC: 6 | RNVC: 9

20 Nov 1980

5120-14-526-7546
Socket Wrench Set

145267546
OCE91-113-1: RNCC: 3 | RNVC: 2
0CE91-113-1: RNCC: 5 | RNVC: 2

3 Sep 2001

5120-14-510-9843
Hand Hammer

145109843
2970003: RNCC: 3 | RNVC: 2

25 Nov 1998

5120-14-214-4935
Box Wrench

142144935
33-14X17: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-438-0968
Mechanical Puller

144380968
NO PRIMARY REF14-438-0968: RNCC: 3 | RNVC: 2
801029: RNCC: 5 | RNVC: 9
801029: RNCC: 5 | RNVC: 9

7 Mar 1990

5120-14-273-6986
Hand Hammer Head

142736986
E71-013A3500: RNCC: 2 | RNVC: 2
2-3500: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-302-4661
Socket Wrench

143024661
3130S95-68-096-1: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-524-1219
Drive Pin Punch

145241219
48327421-2: RNCC: 3 | RNVC: 2
7511-183-27421-2: RNCC: 5 | RNVC: 9

2 Mar 2001

5120-14-329-6328
Drift Pin Set

143296328
M31-050: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-535-0389
Gas Torch

145350389
B300: RNCC: 3 | RNVC: 2
UX030152: RNCC: 6 | RNVC: 9

30 Apr 2003

5120-14-546-2119
Seal Inserter

145462119
MGF589260001: RNCC: 3 | RNVC: 2

15 Jun 2005

5120-14-375-1808
Mechanical Puller

143751808
16380145: RNCC: 3 | RNVC: 2
16380145: RNCC: 5 | RNVC: 9

26 Feb 1982

5120-14-553-1467
Fuse Puller

145531467
P215592: RNCC: 3 | RNVC: 2

6 Mar 2007

5120-14-438-4522
Gear Inserter

144384522
330A98-3515-00: RNCC: 3 | RNVC: 2

21 Mar 1990

5120-14-336-1948
Lamp Extractor

143361948
496777: RNCC: 3 | RNVC: 2
85-689-1091: RNCC: 6 | RNVC: 9

24 Jul 1976

5120-14-404-1177
Socket Wrench

144041177
1717Z: RNCC: 3 | RNVC: 2
C2M-99-12.9: RNCC: 3 | RNVC: 2

11 Sep 1985

5120-14-487-5852
Plastic Mallet

144875852
320-32D: RNCC: 3 | RNVC: 2
3272670269279: RNCC: 5 | RNVC: 2

10 Apr 1997

5120-14-377-6227
Hand Hammer

143776227
0055153101: RNCC: 3 | RNVC: 2
55153101: RNCC: 5 | RNVC: 9

10 Jun 1982

5120-14-437-6855
Mechanical Puller

144376855
9689160204: RNCC: 3 | RNVC: 2
9689160204: RNCC: 5 | RNVC: 2
1688110026: RNCC: 5 | RNVC: 2

7 Feb 1990

5120-14-220-5148
Drill Drift

142205148
3160-95-33-003: RNCC: 3 | RNVC: 2
3160S95-33-003: RNCC: 5 | RNVC: 2

1 Jan 1965

5120-14-262-4896
Box Wrench

142624896
321-95-0036-00: RNCC: 3 | RNVC: 2
08-439: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-393-8862
Mechanical Puller

143938862
NO PRIMARY REF14-393-8862: RNCC: 3 | RNVC: 2
OU139436: RNCC: 5 | RNVC: 9

23 Jun 1984

5120-14-224-2652
Open End Box Wrench

142242652
37-17X19: RNCC: 3 | RNVC: 2
V2-95431-04: RNCC: 5 | RNVC: 2
17-9-49: RNCC: 5 | RNVC: 2

1 Jan 1966

5120-14-465-4628
Gear Inserter

144654628
851-500-049-0: RNCC: 3 | RNVC: 2

30 Sep 1993

5120-14-200-9492
Socket Wrench

142009492
0117370: RNCC: 3 | RNVC: 2
72-35: RNCC: 5 | RNVC: 2
72.35: RNCC: 5 | RNVC: 2

1 Jan 1962

5120-14-406-6556
Mechanical Puller

144066556
853-200-817-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-545-5014
Brake Lining Clamp

145455014
FR-99200: RNCC: 3 | RNVC: 2

15 Apr 2005

5120-14-285-6326
Mechanical Puller

142856326
T0X: RNCC: 3 | RNVC: 2
720814: RNCC: 5 | RNVC: 9
ZINT0X: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-410-3517
Mechanical Puller

144103517
8812247000: RNCC: 3 | RNVC: 2

18 Jun 1986

5120-14-350-1515
Mechanical Puller

143501515
NO PRIMARY REF14-350-1515: RNCC: 3 | RNVC: 2
RT6229: RNCC: 5 | RNVC: 9
85-688-9492: RNCC: 6 | RNVC: 9

14 Jun 1978

5120-14-387-2788
Driftpin

143872788
639100203: RNCC: 3 | RNVC: 2
639100203: RNCC: 5 | RNVC: 9

15 Sep 1983

5120-14-551-1657
Orangewood Stick

145511657
91856911: RNCC: 3 | RNVC: 2
4701: RNCC: 3 | RNVC: 2

30 Aug 2006

5120-14-497-5572
Box Wrench

144975572
54A.24: RNCC: 3 | RNVC: 2
3148511106006: RNCC: 5 | RNVC: 2
0110600: RNCC: 5 | RNVC: 9
F300 0T 023 3561: RNCC: 6 | RNVC: 9

15 Oct 1997

5120-14-373-0071
Open End Box Wrench

143730071
9970-115-712: RNCC: 3 | RNVC: 2
85-691-0286: RNCC: 6 | RNVC: 9

21 Sep 1981

5120-14-343-9649
Socket Wrench

143439649
A0BA: RNCC: 3 | RNVC: 2
85-686-0295: RNCC: 6 | RNVC: 9

13 Jul 1977

5120-14-321-8546
Driftpin

143218546
6521775: RNCC: 3 | RNVC: 2
6521775: RNCC: 5 | RNVC: 1
85-626-7242: RNCC: 6 | RNVC: 9

1 Jan 1975

5120-14-513-8670
Box Wrench

145138670
647471: RNCC: 3 | RNVC: 2

14 Apr 1999

5120-14-425-9564
Aligning Punch

144259564
502177ETH20R2: RNCC: 3 | RNVC: 2

28 Jul 1988

5120-14-522-3853
Mechanical Puller

145223853
TC3247G001: RNCC: 3 | RNVC: 2

25 Oct 2000

5120-14-458-2303
Inspection Mirror

144582303
834ART: RNCC: 3 | RNVC: 2
834.RT: RNCC: 5 | RNVC: 2
834RT: RNCC: 5 | RNVC: 2
3148512068259: RNCC: 5 | RNVC: 2

14 Oct 1992

5120-14-455-0065
Rivet Bucking Bar

144550065
853-600-323-0: RNCC: 3 | RNVC: 2

1 May 1992

5120-14-384-9224
Socket Wrench

143849224
9970-121-271: RNCC: 3 | RNVC: 2

2 Jun 1983

5120-14-546-5348
Inspection Mirror

145465348
KIT CEM/ILL+SMS+SMC+SML+SMR: RNCC: 3 | RNVC: 2
KIT CEM/ILL+SMS+SMC+SML+SMR: RNCC: 5 | RNVC: 2

18 Jul 2005

5120-14-270-5758
Mechanical Puller

142705758
162: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-542-7687
Seal Inserter

145427687
5000901210: RNCC: 3 | RNVC: 2

13 Aug 2004

5120-14-446-7038
Drill Guide

144467038
549739: RNCC: 3 | RNVC: 2

9 Apr 1991

5120-14-460-7944
Seal Inserter

144607944
TB3060501: RNCC: 3 | RNVC: 2

10 Feb 1993

5120-14-424-8004
Hand Tube Bender

144248004
253633: RNCC: 3 | RNVC: 2
253633: RNCC: 5 | RNVC: 9

9 Jun 1988

5120-14-395-7160
Mechanical Puller

143957160
025-1776-78: RNCC: 3 | RNVC: 2

30 Oct 1984

5120-14-432-7177
Seal Inserter

144327177
OUT50095: RNCC: 3 | RNVC: 2
0UT50095: RNCC: 5 | RNVC: 2

21 Jun 1989

5120-14-301-9646
Plier Wrench

143019646
520-30: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-440-2901
Mechanical Puller

144402901
39382910: RNCC: 3 | RNVC: 2
39382910: RNCC: 5 | RNVC: 9

11 Jul 1990

5120-14-548-6392
Mechanical Puller

145486392
Q47788: RNCC: 3 | RNVC: 2
Q47788: RNCC: 5 | RNVC: 2

27 Jan 2006

5120-14-442-3615
Box Wrench

144423615
0108250: RNCC: 3 | RNVC: 2
51.50: RNCC: 5 | RNVC: 2

15 Oct 1990

5120-14-542-2890
Mechanical Puller

145422890
948918408: RNCC: 3 | RNVC: 2
948918408: RNCC: 5 | RNVC: 9

8 Jul 2004

5120-14-244-8557
Drive Pin Punch Set

142448557
71181: RNCC: 3 | RNVC: 2
NO PRIMARY REF14-244-8557: RNCC: 3 | RNVC: 2
250JS12: RNCC: 5 | RNVC: 2
1746-00: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-508-4731
Open End Box Wrench

145084731
42.3/8X7/16: RNCC: 3 | RNVC: 2
0101765: RNCC: 5 | RNVC: 2
CAE00886: RNCC: 5 | RNVC: 2
3148511017654: RNCC: 5 | RNVC: 2

14 Sep 1998

5120-14-300-3781
Mechanical Puller

143003781
02640048500: RNCC: 3 | RNVC: 2
102548: RNCC: 5 | RNVC: 2
026400485: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-468-9807
Gear Inserter

144689807
40N106154: RNCC: 3 | RNVC: 2

30 Mar 1994

5120-14-433-4347
Seal Inserter

144334347
0868749Q00: RNCC: 3 | RNVC: 2

25 Jul 1989

5120-14-506-7270
Mechanical Puller

145067270
366-466: RNCC: 3 | RNVC: 2

13 May 1998

5120-14-434-3211
Seal Inserter

144343211
OUT50351: RNCC: 3 | RNVC: 2
0UT50351: RNCC: 5 | RNVC: 2

20 Sep 1989

5120-14-274-7896
Rawhide Mallet

142747896
3902-70: RNCC: 3 | RNVC: 9

1 Jan 1971

5120-14-377-1829
Seal Inserter

143771829
224401: RNCC: 3 | RNVC: 2
00058425: RNCC: 5 | RNVC: 2
058425: RNCC: 5 | RNVC: 2

17 May 1982

5120-14-542-9421
Mechanical Puller

145429421
8370007: RNCC: 3 | RNVC: 2
8370007: RNCC: 5 | RNVC: 2

14 Aug 2004

5120-14-274-0692
Hand Hydraulic Jack

142740692
DLT039992: RNCC: 3 | RNVC: 2
DLT039992: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-395-0551
Mechanical Puller

143950551
8812724000: RNCC: 3 | RNVC: 2

2 Oct 1984

5120-14-501-5646
Open End Box Wrench

145015646
70A.18: RNCC: 3 | RNVC: 2
3148511166680: RNCC: 5 | RNVC: 2
0116668: RNCC: 5 | RNVC: 9

5 Nov 1997

5120-14-483-8687
Seal Remover

144838687
0-702407-1-2: RNCC: 3 | RNVC: 2

5 Oct 1996

5120-14-373-8757
Socket Wrench

143738757
973355: RNCC: 3 | RNVC: 9

8 Dec 1981

5120-14-281-7626
Mechanical Puller

142817626
A124193: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-401-2491
Box Wrench

144012491
105N6X8: RNCC: 3 | RNVC: 2

5 Jun 1985

5120-14-463-9773
Open End Box Wrench

144639773
854-500-324-0: RNCC: 3 | RNVC: 2

7 Jul 1993

5120-14-385-3485
Mechanical Puller

143853485
6808J32-3004-03: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-319-4601
Driftpin

143194601
3130S95-11-534: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-368-2859
Mechanical Puller

143682859
NO PRIMARY REF14-368-2859: RNCC: 3 | RNVC: 2
336-72214-0: RNCC: 5 | RNVC: 9

20 Feb 1981

5120-14-301-5359
Socket Wrench

143015359
91-11: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-274-8042
Hammer Handle

142748042
B54522-33U400: RNCC: 2 | RNVC: 2
1-15: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-514-3858
Open End Box Wrench

145143858
ENFD29468-21X23: RNCC: 3 | RNVC: 2

19 May 1999

5120-14-283-3893
Open End Box Wrench

142833893
9970-115-309: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-202-1702
Socket Wrench

142021702
6-003-076: RNCC: 3 | RNVC: 2
6003076000: RNCC: 5 | RNVC: 2

1 Jan 1963

5120-14-226-0028
Drive Pin Punch

142260028
170319: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-378-4252
Driftpin

143784252
365A92-1104-00: RNCC: 3 | RNVC: 2

11 Aug 1982

5120-14-378-8990
Box Wrench

143788990
0056133117: RNCC: 3 | RNVC: 2
0056133117: RNCC: 5 | RNVC: 9
56133117: RNCC: 5 | RNVC: 9

6 Sep 1982

5120-14-385-3144
Box Wrench

143853144
360A93-3308-20: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-306-6367
Hand Hydraulic Jack

143066367
P2477A: RNCC: 3 | RNVC: 2
85-674-7000: RNCC: 6 | RNVC: 9

1 Jan 1974

5120-14-311-1705
Box Wrench

143111705
552-427MA057REP2: RNCC: 3 | RNVC: 2
536-105-004REP2: RNCC: 6 | RNVC: 9

1 Jan 1974

5120-14-427-1145
Drive Pin Punch

144271145
540057: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-294-0752
Tack Claw

142940752
NO PRIMARY REF14-294-0752: RNCC: 3 | RNVC: 2
130-600: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-363-4658
Box Wrench

143634658
W3190M: RNCC: 3 | RNVC: 9

9 May 1980

5120-14-290-8459
Putty Knife

142908459
6093: RNCC: 3 | RNVC: 9

1 Jan 1972

5120-14-549-8906
Box Wrench

145498906
55A.10X11: RNCC: 3 | RNVC: 2
55A.10X11: RNCC: 5 | RNVC: 2

17 May 2006

5120-14-317-5922
Mechanical Puller

143175922
491048: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-416-2751
Driftpin

144162751
15153713: RNCC: 3 | RNVC: 2

3 Jun 1987

5120-14-555-3251
Drive Pin Punch

145553251
511332: RNCC: 3 | RNVC: 2

25 Oct 2007

5120-14-452-7376
Box Wrench

144527376
109-24: RNCC: 3 | RNVC: 2
3272670254640: RNCC: 5 | RNVC: 2

15 Jan 1992

5120-14-217-5815
Mechanical Puller

142175815
222508-60: RNCC: 3 | RNVC: 2
222508-60: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-297-4693
Mechanical Puller

142974693
02640040100: RNCC: 3 | RNVC: 2
026400401: RNCC: 5 | RNVC: 2
04572: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-292-8761
Mechanical Puller

142928761
26460MN112: RNCC: 3 | RNVC: 2
26460MN112: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-292-3216
Hand Hydraulic Jack

142923216
3501250: RNCC: 3 | RNVC: 2
TP: RNCC: 3 | RNVC: 9
TP-25T: RNCC: 5 | RNVC: 9
RASTP: RNCC: 5 | RNVC: 9
AH114: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-403-5717
Mechanical Puller

144035717
330A93-2019-01: RNCC: 3 | RNVC: 2

21 Aug 1985

5120-14-543-0388
Mechanical Puller

145430388
6523POC: RNCC: 3 | RNVC: 2

18 Aug 2004

5120-14-284-1399
Ratchet Wrench

142841399
NO PRIMARY REF14-284-1399: RNCC: 3 | RNVC: 2
19297332: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-334-8415
Socket Wrench

143348415
90-30: RNCC: 3 | RNVC: 2
3272670270633: RNCC: 5 | RNVC: 2

2 Jun 1976

5120-14-441-2317
Mechanical Puller

144412317
6805V32-2666-00: RNCC: 3 | RNVC: 2

22 Aug 1990

5120-14-342-1946
Aligning Punch

143421946
ST107M144-1P17C: RNCC: 3 | RNVC: 2
ST107M144P17: RNCC: 5 | RNVC: 2
ST107M144-1P17B: RNCC: 5 | RNVC: 2

14 Apr 1977

5120-14-321-1565
Pin Vise

143211565
TR30: RNCC: 3 | RNVC: 2
TR-30: RNCC: 3 | RNVC: 2
3272670261495: RNCC: 5 | RNVC: 2
85-674-7630: RNCC: 6 | RNVC: 9

1 Jan 1975

5120-14-210-9828
Socket Wrench

142109828
80-16: RNCC: 3 | RNVC: 2
3107216: RNCC: 3 | RNVC: 2
122-16: RNCC: 3 | RNVC: 9
DEM122-16: RNCC: 5 | RNVC: 9
VIR3107216: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-546-9020
Drive Pin Punch

145469020
209: RNCC: 3 | RNVC: 2
122/255/0: RNCC: 5 | RNVC: 2

5 Sep 2005

5120-14-249-9476
Open End Box Wrench

142499476
NO PRIMARY REF14-249-9476: RNCC: 3 | RNVC: 2
42-19X21: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-256-7064
Hand Hammer

142567064
M0B138-2500EC520: RNCC: 3 | RNVC: 2
NO PRIMARY REF14-256-7064: RNCC: 3 | RNVC: 2
D10-1303A6: RNCC: 5 | RNVC: 9

1 Jan 1969

5120-14-425-9556
Aligning Punch

144259556
502169WTH20R2: RNCC: 3 | RNVC: 2

28 Jul 1988

5120-14-542-6857
Aligning Punch

145426857
8038111M00: RNCC: 3 | RNVC: 2

28 Jul 2004

5120-14-432-7225
Seal Inserter

144327225
OUT50160: RNCC: 3 | RNVC: 2
0UT50160: RNCC: 5 | RNVC: 2

21 Jun 1989

5120-14-425-6787
Mechanical Puller

144256787
8811037300: RNCC: 3 | RNVC: 2

21 Jul 1988

5120-14-370-8870
Gear Inserter

143708870
6801R32-1026-00: RNCC: 3 | RNVC: 2
6801366A32-1026-00: RNCC: 5 | RNVC: 2

5 Jun 1981

5120-14-527-7166
Mechanical Puller

145277166
888-492-600-1: RNCC: 3 | RNVC: 2

14 Nov 2001

5120-14-291-1580
Hammer Handle

142911580
20503: RNCC: 3 | RNVC: 2
3599188: RNCC: 5 | RNVC: 2
072733001: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-299-3670
Driftpin

142993670
413-00893-000: RNCC: 3 | RNVC: 2
413-0893: RNCC: 5 | RNVC: 2
413-00893-000: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-250-5923
Socket Wrench

142505923
MZ7-102: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-541-1718
Plier Clamp

145411718
T5.LPB: RNCC: 3 | RNVC: 2
T-5LPB: RNCC: 5 | RNVC: 2
AA018012: RNCC: 6 | RNVC: 9

14 May 2004

5120-14-274-7889
Hand Hammer Head

142747889
13-54-25X25: RNCC: 2 | RNVC: 2
365-400: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-393-0341
Hand Hammer

143930341
310-26: RNCC: 3 | RNVC: 2
3272670100039: RNCC: 5 | RNVC: 2

12 Apr 1984

5120-14-232-6091
Socket Wrench

142326091
8810254001: RNCC: 3 | RNVC: 2
6-001-575: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-326-2739
Aligning Punch

143262739
330A94-2714-10: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-433-3077
Mechanical Puller

144333077
853-202-404-0: RNCC: 3 | RNVC: 2

19 Jul 1989

5120-14-464-2479
Seal Inserter

144642479
854-500-392-0: RNCC: 3 | RNVC: 2

28 Jul 1993

5120-14-516-9015
Ratchet Wrench

145169015
64.3/8X7/16: RNCC: 3 | RNVC: 2
68B.3/8X7/16: RNCC: 3 | RNVC: 9
3148517428300: RNCC: 5 | RNVC: 2
00.28.29.16: RNCC: 5 | RNVC: 2

20 Oct 1999

5120-14-405-0846
Socket Wrench

144050846
91.22X23: RNCC: 3 | RNVC: 2
3148511275900: RNCC: 5 | RNVC: 2
91-22X23: RNCC: 5 | RNVC: 2
0127590: RNCC: 5 | RNVC: 9

20 Nov 1985

5120-14-388-2328
Socket Wrench

143882328
VTR501-2-1142: RNCC: 3 | RNVC: 2

12 Oct 1983

5120-14-201-6847
Hand Hammer

142016847
0004500301: RNCC: 3 | RNVC: 2
2-5000-EC: RNCC: 3 | RNVC: 2
4-5000EC: RNCC: 3 | RNVC: 2

1 Jan 1962

5120-14-465-4644
Seal Inserter

144654644
851-500-068-0: RNCC: 3 | RNVC: 2

30 Sep 1993

5120-14-251-9806
Socket Wrench

142519806
NO PRIMARY REF14-251-9806: RNCC: 3 | RNVC: 2
4105-7: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-440-6387
Seal Inserter

144406387
16849599: RNCC: 3 | RNVC: 2
16849599: RNCC: 5 | RNVC: 9

18 Jul 1990

5120-14-347-8100
Mechanical Puller

143478100
NO PRIMARY REF14-347-8100: RNCC: 3 | RNVC: 2
20C8479: RNCC: 5 | RNVC: 9

1 Mar 1978

5120-14-485-7344
Mechanical Puller

144857344
332A93-3685-00: RNCC: 3 | RNVC: 2

6 Feb 1997

5120-14-551-1419
Hand Hammer

145511419
200.F60: RNCC: 3 | RNVC: 2
3148511464496: RNCC: 3 | RNVC: 2
200.F60: RNCC: 5 | RNVC: 2

29 Aug 2006

5120-14-434-3590
Mechanical Puller

144343590
8815455000: RNCC: 3 | RNVC: 2
89414995: RNCC: 5 | RNVC: 2

20 Sep 1989

5120-14-555-0173
Hammer Handle

145550173
210.MH12: RNCC: 3 | RNVC: 2

19 Sep 2007

5120-14-540-5072
Plier Clamp

145405072
DM.34GM: RNCC: 3 | RNVC: 2
3148510199870: RNCC: 5 | RNVC: 2

1 Apr 2004

5120-14-242-9463
Ratchet Wrench

142429463
NO PRIMARY REF14-242-9463: RNCC: 3 | RNVC: 2
213MTB1: RNCC: 5 | RNVC: 2
0M2A: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-520-9490
Seal Inserter

145209490
0014130: RNCC: 3 | RNVC: 2

23 Jun 2000

5120-14-537-5169
Mechanical Puller

145375169
591269: RNCC: 3 | RNVC: 2
591269: RNCC: 5 | RNVC: 2

3 Nov 2003

5120-14-446-7007
Drill Guide

144467007
548177: RNCC: 3 | RNVC: 2

9 Apr 1991

5120-14-349-8588
Mechanical Puller

143498588
AMG204378: RNCC: 3 | RNVC: 2
204378: RNCC: 5 | RNVC: 2

14 Jun 1978

5120-14-528-4547
Socket Wrench

145284547
27505784-9: RNCC: 3 | RNVC: 2

30 Jan 2002

5120-14-363-5824
Socket Wrench

143635824
89-6: RNCC: 3 | RNVC: 2

9 May 1980

5120-14-363-8594
Socket Wrench

143638594
8811239001: RNCC: 3 | RNVC: 2

7 Aug 1980

5120-14-370-1187
Blacksmiths' Tongs

143701187
M0B43-600: RNCC: 3 | RNVC: 2
130516: RNCC: 5 | RNVC: 2
C0P2148: RNCC: 5 | RNVC: 9

18 May 1981

5120-14-218-9664
Box Wrench

142189664
100-12X13: RNCC: 3 | RNVC: 2
113-12X13: RNCC: 3 | RNVC: 9
3272670232822: RNCC: 5 | RNVC: 2
DEM113-12X13: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-265-3215
Socket Wrench

142653215
NO PRIMARY REF14-265-3215: RNCC: 3 | RNVC: 2
BL19922: RNCC: 5 | RNVC: 9

1 Jan 1970

5120-14-411-9142
Mechanical Puller

144119142
14189970F: RNCC: 3 | RNVC: 2

16 Sep 1986

5120-14-375-1777
Mechanical Puller

143751777
16380229: RNCC: 3 | RNVC: 2
16380229: RNCC: 5 | RNVC: 9

26 Feb 1982

5120-14-506-1042
Seal Inserter

145061042
071685: RNCC: 3 | RNVC: 2
071685: RNCC: 5 | RNVC: 9

2 Apr 1998

5120-14-434-3275
Seal Inserter

144343275
EMH141378V: RNCC: 3 | RNVC: 2
EMH141378V: RNCC: 5 | RNVC: 9

20 Sep 1989

5120-14-398-6577
Hand Hydraulic Jack

143986577
HYDROGRIF10T: RNCC: 3 | RNVC: 2

31 Jan 1985

5120-14-342-8774
C Clamp

143428774
87: RNCC: 3 | RNVC: 2

16 May 1977

5120-14-432-7318
Seal Inserter

144327318
NO PRIMARY REF14-432-7318: RNCC: 3 | RNVC: 2
0U139364: RNCC: 5 | RNVC: 9
OU139364: RNCC: 5 | RNVC: 9

21 Jun 1989

5120-14-200-1400
Mechanical Puller

142001400
8810003065: RNCC: 3 | RNVC: 2
6-000-346: RNCC: 5 | RNVC: 2
881-0-003-065: RNCC: 5 | RNVC: 2

1 Jan 1962

5120-14-473-9614
Box Wrench

144739614
830630: RNCC: 3 | RNVC: 2
F25444-03: RNCC: 5 | RNVC: 2

18 Jan 1995

5120-14-220-7491
Socket Wrench

142207491
BB235-35: RNCC: 3 | RNVC: 9

1 Jan 1965

5120-14-201-5653
Scratch Awl

142015653
NO PRIMARY REF14-201-5653: RNCC: 3 | RNVC: 2
109-5M: RNCC: 5 | RNVC: 9

1 Jan 1962

5120-14-456-4058
Mechanical Puller

144564058
851-290-023-0: RNCC: 3 | RNVC: 2

2 Jul 1992

5120-14-552-2083
Box Wrench

145522083
810044608: RNCC: 3 | RNVC: 2

4 Dec 2006

5120-14-522-3838
Mechanical Puller

145223838
TC3135G001: RNCC: 3 | RNVC: 2

25 Oct 2000

5120-14-322-5407
Box Wrench

143225407
50.24: RNCC: 3 | RNVC: 2
50-24: RNCC: 5 | RNVC: 2
3148511065006: RNCC: 5 | RNVC: 2
0106500: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-283-6543
Hand Screw Jack

142836543
4863-10000: RNCC: 3 | RNVC: 9

1 Jan 1972

5120-14-400-1957
Mechanical Puller

144001957
332A93-3108-00: RNCC: 3 | RNVC: 2

24 Apr 1985

5120-14-417-2120
Machinist's Vise

144172120
SAMBRE61-100MM: RNCC: 3 | RNVC: 2

1 Jul 1987

5120-14-432-3816
Hand Rivet Set

144323816
540982: RNCC: 3 | RNVC: 2
00540982: RNCC: 5 | RNVC: 2

7 Jun 1989

5120-14-244-9031
Socket Wrench

142449031
91.6X7: RNCC: 3 | RNVC: 2
3111208: RNCC: 3 | RNVC: 2
3148511275108: RNCC: 5 | RNVC: 2
91-6X7: RNCC: 5 | RNVC: 2
0127510: RNCC: 5 | RNVC: 9
VIR3111208: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-377-1830
Seal Inserter

143771830
224402: RNCC: 3 | RNVC: 2
00058426: RNCC: 5 | RNVC: 2
058426: RNCC: 5 | RNVC: 2

17 May 1982

5120-14-326-0850
Putty Knife

143260850
32005P: RNCC: 3 | RNVC: 2
0695 940 905: RNCC: 5 | RNVC: 2

2 Jul 1975

5120-14-238-3486
Drive Pin Punch

142383486
21458: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-553-5927
Box Wrench

145535927
07142330: RNCC: 3 | RNVC: 2

19 Apr 2007

5120-14-335-1463
Driftpin

143351463
E10242PL1AREP34: RNCC: 3 | RNVC: 2

3 Jun 1976

5120-14-533-1414
Seal Inserter

145331414
888-452-008-0: RNCC: 3 | RNVC: 2

23 Jan 2003

5120-14-249-9398
Open End Box Wrench

142499398
328262A: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-396-9295
Mechanical Puller

143969295
VFA831-5: RNCC: 3 | RNVC: 2

27 Nov 1984

5120-14-484-4537
Socket Wrench Set

144844537
R.440UP: RNCC: 3 | RNVC: 2
3148515127410: RNCC: 5 | RNVC: 2
0512741: RNCC: 5 | RNVC: 9

19 Nov 1996

5120-14-408-9646
Mechanical Puller

144089646
OUT50105: RNCC: 3 | RNVC: 2
0UT50105: RNCC: 5 | RNVC: 2

9 Apr 1986

5120-14-390-3203
Socket Wrench

143903203
01-90900-037: RNCC: 3 | RNVC: 2
01-90-900-037: RNCC: 5 | RNVC: 2
85-692-4861: RNCC: 6 | RNVC: 9

26 Jan 1984

5120-14-031-9484
Ratchet Wrench

140319484
NO PRIMARY REF14-031-9484: RNCC: 3 | RNVC: 2
0051944X00: RNCC: 5 | RNVC: 2
MT00-12-00: RNCC: 5 | RNVC: 2
RL01-12-00: RNCC: 5 | RNVC: 9

5 Jul 1980

5120-14-517-7409
Box Wrench

145177409
851-190-008-0: RNCC: 3 | RNVC: 2

5 Jan 2000

5120-14-482-8289
Socket Wrench

144828289
322FB0107: RNCC: 3 | RNVC: 2

25 Jul 1996

5120-14-337-5420
Mechanical Puller

143375420
26545930900: RNCC: 3 | RNVC: 2
ASSY145020: RNCC: 5 | RNVC: 2
265459309: RNCC: 5 | RNVC: 9

7 Oct 1976

5120-14-300-9643
Seal Inserter

143009643
341A93-3415-20: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-308-3143
Socket Wrench

143083143
66.12X13: RNCC: 3 | RNVC: 2
66-12X13: RNCC: 5 | RNVC: 2
0714 261 415: RNCC: 5 | RNVC: 2
0714 261 213: RNCC: 5 | RNVC: 2
3148511150405: RNCC: 5 | RNVC: 2
0115040: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-311-1676
Socket Wrench

143111676
76.17: RNCC: 3 | RNVC: 2
89-17: RNCC: 3 | RNVC: 2
237-6589: RNCC: 5 | RNVC: 2
2695 612 617: RNCC: 5 | RNVC: 2
76-17: RNCC: 5 | RNVC: 2
3148511208908: RNCC: 5 | RNVC: 2
91369648: RNCC: 5 | RNVC: 2
FACOM76.17: RNCC: 5 | RNVC: 9
0120890: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-339-0163
Socket Wrench

143390163
89-20: RNCC: 3 | RNVC: 2
SYB0332: RNCC: 5 | RNVC: 2

17 Dec 1976

5120-14-441-2166
Aligning Punch

144412166
332A94-2701-11: RNCC: 3 | RNVC: 2

22 Aug 1990

5120-14-364-4096
Socket Wrench

143644096
UHJ232-44: RNCC: 3 | RNVC: 2
MHJ232-44: RNCC: 5 | RNVC: 2

7 Aug 1980

5120-14-450-3789
Seal Inserter

144503789
NO PRIMARY REF14-450-3789: RNCC: 3 | RNVC: 2
BL54185: RNCC: 5 | RNVC: 9

1 Oct 1991

5120-14-349-9287
Hand Hammer Head

143499287
30713: RNCC: 3 | RNVC: 2

14 Jun 1978

5120-14-542-9627
Socket Wrench

145429627
820012: RNCC: 3 | RNVC: 2

14 Aug 2004

5120-14-257-1797
Hand Screw Jack

142571797
NO PRIMARY REF14-257-1797: RNCC: 3 | RNVC: 2
0870380100: RNCC: 5 | RNVC: 2
0870380100: RNCC: 5 | RNVC: 9
1050: RNCC: 5 | RNVC: 9
105B: RNCC: 5 | RNVC: 9

1 Jan 1969

5120-14-513-1450
Box Wrench

145131450
0446853P00: RNCC: 3 | RNVC: 2
SD 65-3-03 0 00 0665569Y03: RNCC: 5 | RNVC: 2

5 Mar 1999

5120-14-435-0737
Seal Inserter

144350737
853-290-020-0: RNCC: 3 | RNVC: 2

18 Oct 1989

5120-14-354-7180
Hand Scissors Jack

143547180
6725-40: RNCC: 3 | RNVC: 2

20 Feb 1979

5120-14-363-9946
Mechanical Puller

143639946
341A98-2017-00: RNCC: 3 | RNVC: 2

7 Aug 1980

5120-14-439-6198
Aligning Punch

144396198
6801E31-1751-20: RNCC: 3 | RNVC: 2

16 May 1990

5120-14-432-7053
Seal Inserter

144327053
OUT11755: RNCC: 3 | RNVC: 2
0UT11755: RNCC: 5 | RNVC: 2

21 Jun 1989

5120-14-446-8344
Plier Wrench

144468344
0181730: RNCC: 3 | RNVC: 2
513-7: RNCC: 5 | RNVC: 2
513.7: RNCC: 5 | RNVC: 2

17 Apr 1991

5120-14-439-8918
Socket Wrench

144398918
M4Z7101913201: RNCC: 3 | RNVC: 2

1 Jun 1990

5120-14-421-3409
Mechanical Puller

144213409
537049: RNCC: 3 | RNVC: 2

14 Jan 1988

5120-14-322-5404
Box Wrench

143225404
55.25X28: RNCC: 3 | RNVC: 2
105N25X28: RNCC: 3 | RNVC: 2
111-25X28: RNCC: 3 | RNVC: 9
0713 305 258: RNCC: 5 | RNVC: 2
3148511112403: RNCC: 5 | RNVC: 2
55-25X28: RNCC: 5 | RNVC: 2
DEM111-25X28: RNCC: 5 | RNVC: 9
0111240: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-468-4143
Crimping Tool Die

144684143
484094-1: RNCC: 3 | RNVC: 2
484094-1: RNCC: 5 | RNVC: 2

25 Feb 1994

5120-14-416-5001
Pawl

144165001
1841-1: RNCC: 3 | RNVC: 2

10 Jun 1987

5120-14-442-6814
Hand Beading Tool

144426814
OUT9304: RNCC: 3 | RNVC: 2
0UT9304: RNCC: 5 | RNVC: 2

24 Oct 1990

5120-14-381-6572
Mechanical Puller

143816572
0000334248: RNCC: 3 | RNVC: 2
334248: RNCC: 5 | RNVC: 9

25 Jan 1983

5120-14-504-4352
Mechanical Puller

145044352
716002: RNCC: 3 | RNVC: 2

17 Feb 1998

5120-14-227-8921
Driftpin

142278921
35-52: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-480-1854
Aligning Punch Set

144801854
151-1339-10: RNCC: 3 | RNVC: 2
EA2-0309: RNCC: 5 | RNVC: 2

26 Feb 1996

5120-14-397-1846
Mechanical Puller

143971846
TB30-95086-000: RNCC: 3 | RNVC: 2

1 Dec 1984

5120-14-532-1109
Seal Inserter

145321109
N673301GC124: RNCC: 3 | RNVC: 2

9 Oct 2002

5120-14-440-1958
Claw Bar

144401958
851-931-179-0: RNCC: 3 | RNVC: 2

11 Jul 1990

5120-14-530-6437
Seal Inserter

145306437
D47725R4: RNCC: 3 | RNVC: 2

1 Jul 2002

5120-14-417-7440
Driftpin

144177440
STM03265: RNCC: 3 | RNVC: 2
STM03265: RNCC: 5 | RNVC: 2

22 Jul 1987

5120-14-480-2026
Hand Vise Jaw

144802026
M4HZ7101966122: RNCC: 3 | RNVC: 2

28 Feb 1996

5120-14-272-4040
Box Wrench

142724040
100-27X30: RNCC: 3 | RNVC: 2
3272670241190: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-267-8263
Socket Wrench

142678263
MAT196-0066F6: RNCC: 3 | RNVC: 2
GSM196-011F9: RNCC: 5 | RNVC: 2
GSM196-11F9: RNCC: 5 | RNVC: 2
MAT196-1234F7: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-522-7198
Seal Inserter

145227198
IND80139: RNCC: 3 | RNVC: 2

15 Nov 2000

5120-14-212-8307
Socket Wrench

142128307
G24-322-38MM: RNCC: 3 | RNVC: 2

1 Jan 1964

5120-14-210-9846
Socket Wrench

142109846
5340DA-CLE14: RNCC: 2 | RNVC: 2
MXZ125A1: RNCC: 3 | RNVC: 2
R300300091: RNCC: 3 | RNVC: 2
R300300091: RNCC: 3 | RNVC: 9
CLE TRIANGULAIRETYP M: RNCC: 5 | RNVC: 2
30432: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-460-3802
Seal Inserter

144603802
052465600: RNCC: 3 | RNVC: 2
85-694-8728: RNCC: 6 | RNVC: 9

21 Jan 1993

5120-14-249-9478
Box Wrench

142499478
62-8X9: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-546-6663
Box Wrench

145466663
55A.30X32: RNCC: 3 | RNVC: 2

27 Jul 2005

5120-14-463-7685
Mechanical Puller

144637685
428407Y: RNCC: 3 | RNVC: 2
M54800: RNCC: 5 | RNVC: 2

29 Jun 1993

5120-14-446-3588
Drill Guide

144463588
59820155: RNCC: 3 | RNVC: 9

18 Mar 1991

5120-14-427-0807
Mechanical Puller

144270807
536684: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-264-3226
Hand Rivet Set

142643226
13-11-20: RNCC: 2 | RNVC: 2

1 Jan 1970

5120-14-432-7309
Seal Inserter

144327309
NO PRIMARY REF14-432-7309: RNCC: 3 | RNVC: 2
0U138290: RNCC: 5 | RNVC: 9
OU138290: RNCC: 5 | RNVC: 9

21 Jun 1989

5120-14-453-9987
Box Wrench

144539987
853-100-279-0: RNCC: 3 | RNVC: 2

19 Mar 1992

5120-14-524-0573
Seal Inserter

145240573
CAS2374: RNCC: 3 | RNVC: 2

22 Feb 2001

5120-14-274-8039
Hammer Handle

142748039
B54522-33U250: RNCC: 2 | RNVC: 2
1-12: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-275-6826
Hand Hydraulic Jack

142756826
NO PRIMARY REF14-275-6826: RNCC: 3 | RNVC: 2
5617: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-411-9117
Mechanical Puller

144119117
15189010T: RNCC: 3 | RNVC: 2

16 Sep 1986

5120-14-549-9038
Box Wrench

145499038
55A.1'1/16X1'1/8: RNCC: 3 | RNVC: 2
55A.1'1/16X1'1/8: RNCC: 5 | RNVC: 2

17 May 2006

5120-14-326-8090
Socket Wrench

143268090
91-46: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-346-5041
Pipe Wrench

143465041
HE586-6100: RNCC: 3 | RNVC: 2
CLESANGLE40AMAGNETIQUE: RNCC: 5 | RNVC: 9

12 Dec 1977

5120-14-462-1107
Mechanical Puller

144621107
29196800: RNCC: 3 | RNVC: 2

5 Apr 1993

5120-14-425-9443
Aligning Punch

144259443
TH20C2-1-4A7: RNCC: 3 | RNVC: 2

28 Jul 1988

5120-14-425-9441
Aligning Punch

144259441
TH20C2-1-4A5: RNCC: 3 | RNVC: 2

28 Jul 1988

5120-14-257-8048
Pipe Wrench

142578048
638-12: RNCC: 3 | RNVC: 2
3272670271807: RNCC: 5 | RNVC: 2
91598854: RNCC: 5 | RNVC: 2
136: RNCC: 5 | RNVC: 2

1 Jan 1969

5120-14-249-9487
Open End Box Wrench

142499487
103-23X26: RNCC: 3 | RNVC: 2
103AMX23X26: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-274-8173
Pipe Wrench

142748173
NO PRIMARY REF14-274-8173: RNCC: 3 | RNVC: 2
75421-33: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-280-3945
Mechanical Puller

142803945
45838: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-549-4934
Mechanical Puller

145494934
6544POC: RNCC: 3 | RNVC: 2

11 Apr 2006

5120-14-285-6252
Mechanical Puller

142856252
M02071: RNCC: 3 | RNVC: 2
0000330821: RNCC: 3 | RNVC: 2
0000330821: RNCC: 5 | RNVC: 9
330821: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-238-6760
Mechanical Puller

142386760
308929: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-202-9292
Hand Hammer

142029292
M0B144EC: RNCC: 3 | RNVC: 2
0RT5-330AM: RNCC: 5 | RNVC: 9

1 Jan 1963

5120-14-422-7446
Torque Handle

144227446
5040TDQ-P535-5: RNCC: 3 | RNVC: 2

17 Mar 1988

5120-14-435-0738
Seal Inserter

144350738
853-290-021-0: RNCC: 3 | RNVC: 2

18 Oct 1989

5120-14-360-4173
Drift Pin Set

143604173
MS427: RNCC: 3 | RNVC: 2
85-101-0473: RNCC: 6 | RNVC: 9

23 Nov 1979

5120-14-286-7400
Socket Wrench

142867400
VTR250-1142: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-532-3155
Electronics Pliers

145323155
0002 0051: RNCC: 3 | RNVC: 2

30 Oct 2002

5120-14-466-4963
Aligning Punch

144664963
851-300-202-0: RNCC: 3 | RNVC: 2

15 Nov 1993

5120-14-420-7175
Hand Rivet Set

144207175
6511-50482: RNCC: 3 | RNVC: 2

16 Dec 1987

5120-14-429-7207
Seal Inserter

144297207
853-290-056-0: RNCC: 3 | RNVC: 2

8 Feb 1989

5120-14-305-2563
Box Wrench

143052563
TH20B2114: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-529-7368
Mechanical Puller

145297368
873058: RNCC: 3 | RNVC: 2

9 Apr 2002

5120-14-440-4579
Mechanical Puller

144404579
90890-06234: RNCC: 3 | RNVC: 2

11 Jul 1990

5120-14-465-4651
Seal Inserter

144654651
851-500-075-0: RNCC: 3 | RNVC: 2

30 Sep 1993

5120-14-304-9304
Drive Pin Punch

143049304
NO PRIMARY REF14-304-9304: RNCC: 3 | RNVC: 2
0160120: RNCC: 5 | RNVC: 2
251-4: RNCC: 5 | RNVC: 2
251.4: RNCC: 5 | RNVC: 2
6-40: RNCC: 5 | RNVC: 2

1 Jan 1974

5120-14-322-5411
Box Wrench

143225411
50.35: RNCC: 3 | RNVC: 2
3148511066102: RNCC: 5 | RNVC: 2
50-35: RNCC: 5 | RNVC: 2
0106610: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-256-7902
Wood Mallet

142567902
798-60: RNCC: 3 | RNVC: 2

1 Jan 1969

5120-14-250-0299
Mechanical Puller

142500299
2003T: RNCC: 3 | RNVC: 2
MR3412-40-2CV: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-371-5741
Driftpin

143715741
9970-125-894: RNCC: 3 | RNVC: 2

5 Aug 1981

5120-14-365-9731
Seal Inserter

143659731
366A93-3206-00: RNCC: 3 | RNVC: 2

4 Nov 1980

5120-14-275-9202
Socket Wrench

142759202
91-4X5: RNCC: 3 | RNVC: 2
3111203: RNCC: 3 | RNVC: 2
VIR3111203: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-419-2707
Driftpin

144192707
537101: RNCC: 3 | RNVC: 2

16 Oct 1987

5120-14-425-8486
Drive Pin Punch

144258486
BN311545M25REP9: RNCC: 2 | RNVC: 2
GY15619-80: RNCC: 5 | RNVC: 2

26 Jul 1988

5120-14-513-2845
Catch Lever Tool

145132845
NO PRIMARY REF14-513-2845: RNCC: 3 | RNVC: 2
NNP 3040864526889: RNCC: 5 | RNVC: 9

10 Mar 1999

5120-14-247-8219
Socket Wrench Set

142478219
NO PRIMARY REF14-247-8219: RNCC: 3 | RNVC: 2
R440U: RNCC: 5 | RNVC: 2
91450359: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-445-0105
Hand Beading Tool

144450105
853-600-273-6: RNCC: 3 | RNVC: 2

31 Jan 1991

5120-14-456-9430
Hand Screw Jack

144569430
3704MRC8-00: RNCC: 3 | RNVC: 2

30 Jul 1992

5120-14-479-0363
Seal Inserter

144790363
888-377-800-1: RNCC: 3 | RNVC: 2

6 Dec 1995

5120-14-208-2087
Digging Pick

142082087
NO PRIMARY REF14-208-2087: RNCC: 3 | RNVC: 2
ST24SMGCHA2-327A: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-507-0307
Socket Wrench Set

145070307
NO PRIMARY REF14-507-0307: RNCC: 3 | RNVC: 2
94.JE13: RNCC: 5 | RNVC: 2

3 Jun 1998

5120-14-386-1623
Mechanical Puller

143861623
6802J32-1662-00: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-555-9213
Plier Clamp

145559213
123 081: RNCC: 3 | RNVC: 2

8 Jan 2008

5120-14-311-1682
Socket Wrench

143111682
76.29: RNCC: 3 | RNVC: 2
250-5440: RNCC: 5 | RNVC: 2
2695 612 629: RNCC: 5 | RNVC: 2
76-29: RNCC: 5 | RNVC: 2
3148511210109: RNCC: 5 | RNVC: 2
0121010: RNCC: 5 | RNVC: 9
FACOM76.29: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-412-8380
Hand Rivet Set

144128380
067332: RNCC: 3 | RNVC: 2
XG1-8TGS: RNCC: 5 | RNVC: 2

5 Nov 1986

5120-14-426-0284
Seal Inserter

144260284
851-500-203-0: RNCC: 3 | RNVC: 2

28 Jul 1988

5120-14-445-0088
Mechanical Puller

144450088
NO PRIMARY REF14-445-0088: RNCC: 3 | RNVC: 2
568722: RNCC: 5 | RNVC: 9

31 Jan 1991

5120-14-488-1768
Drill Guide

144881768
8402M86-06: RNCC: 3 | RNVC: 2
488402M86-06: RNCC: 5 | RNVC: 2

18 Apr 1997

5120-14-278-4683
Mechanical Puller

142784683
A127602: RNCC: 3 | RNVC: 2
100175: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-497-7986
Mechanical Puller

144977986
T60UT0053000: RNCC: 3 | RNVC: 2

20 Oct 1997

5120-14-460-7589
Mechanical Puller

144607589
K5107R10001: RNCC: 3 | RNVC: 2

8 Feb 1993

5120-14-488-4589
Hand Hammer

144884589
12296C1: RNCC: 3 | RNVC: 2
F3435-12296C1: RNCC: 5 | RNVC: 2
MQ-59A: RNCC: 6 | RNVC: 9

13 May 1997

5120-14-413-5653
Mechanical Puller

144135653
NO PRIMARY REF14-413-5653: RNCC: 3 | RNVC: 2
10742: RNCC: 5 | RNVC: 9

17 Dec 1986

5120-14-542-9419
Mechanical Puller

145429419
8370005: RNCC: 3 | RNVC: 2
8370005: RNCC: 5 | RNVC: 2

14 Aug 2004

5120-14-295-1785
Drive Pin Punch

142951785
000642005P: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-401-5215
Socket Wrench Set

144015215
NO PRIMARY REF14-401-5215: RNCC: 3 | RNVC: 2
0516980: RNCC: 5 | RNVC: 2
S.451E: RNCC: 5 | RNVC: 2
S451E: RNCC: 5 | RNVC: 2

13 Jun 1985

5120-14-489-5849
Mechanical Puller

144895849
1293.31806: RNCC: 3 | RNVC: 2

6 Aug 1997

5120-14-534-0873
Mechanical Puller

145340873
713114: RNCC: 3 | RNVC: 2

12 Mar 2003

5120-14-412-4650
Mechanical Puller

144124650
F117044: RNCC: 3 | RNVC: 2

15 Oct 1986

5120-14-431-5262
Mechanical Puller

144315262
MUP5908: RNCC: 3 | RNVC: 2

21 Apr 1989

5120-14-350-6042
Mechanical Puller

143506042
30AM007: RNCC: 3 | RNVC: 2
30AM07: RNCC: 5 | RNVC: 2

12 Jul 1978

5120-14-458-7432
Hand Hammer

144587432
203A-20: RNCC: 3 | RNVC: 2
203A.20: RNCC: 5 | RNVC: 2
3148511469309: RNCC: 5 | RNVC: 2

3 Nov 1992

5120-14-204-9167
Hand Vise

142049167
1594-140: RNCC: 3 | RNVC: 2

1 Jan 1963

5120-14-375-0631
Sealant Dispenser

143750631
CA-2: RNCC: 3 | RNVC: 2
CA2: RNCC: 3 | RNVC: 2
VITAL 88: RNCC: 3 | RNVC: 2
PISTOLET PASCALU33: RNCC: 5 | RNVC: 2
3272670306479: RNCC: 5 | RNVC: 2
SYB0335: RNCC: 5 | RNVC: 2

30 Jan 1982

5120-14-433-6118
Mechanical Puller

144336118
8815424000: RNCC: 3 | RNVC: 2
89415012: RNCC: 5 | RNVC: 2

2 Aug 1989

5120-14-213-5198
Mechanical Puller

142135198
50712: RNCC: 3 | RNVC: 2

1 Jan 1964

5120-14-550-8773
Mechanical Puller

145508773
8817744000: RNCC: 3 | RNVC: 2

25 Jul 2006

5120-14-531-8854
Mechanical Puller

145318854
T632G3011101: RNCC: 3 | RNVC: 2

25 Sep 2002

5120-14-431-6170
Sealant Dispenser

144316170
8011: RNCC: 3 | RNVC: 2
0UTT11: RNCC: 5 | RNVC: 2
8972: RNCC: 5 | RNVC: 2

26 Apr 1989

5120-14-425-6795
Mechanical Puller

144256795
8811544000: RNCC: 3 | RNVC: 2

21 Jul 1988

5120-14-303-2682
Socket Wrench

143032682
4503-24-27-32-38: RNCC: 3 | RNVC: 9

1 Jan 1973

5120-14-415-8825
Mechanical Puller

144158825
0067900: RNCC: 3 | RNVC: 2
4828: RNCC: 3 | RNVC: 2
U.32-350: RNCC: 5 | RNVC: 2

26 May 1987

5120-14-450-5184
Mechanical Puller

144505184
393694: RNCC: 3 | RNVC: 2
393694: RNCC: 5 | RNVC: 9

9 Oct 1991

5120-14-249-9365
Socket Wrench

142499365
103036C: RNCC: 3 | RNVC: 2
103036: RNCC: 5 | RNVC: 2
103036: RNCC: 5 | RNVC: 2
2036-19: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-464-4888
Rivet Bucking Bar

144644888
851-910-022-0: RNCC: 3 | RNVC: 2

4 Aug 1993

5120-14-444-3141
Box Wrench

144443141
GS146-02: RNCC: 3 | RNVC: 2

7 Jan 1991

5120-14-235-3905
Inspection Mirror

142353905
NO PRIMARY REF14-235-3905: RNCC: 3 | RNVC: 2
2510K: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-410-3507
Mechanical Puller

144103507
8812051000: RNCC: 3 | RNVC: 2

18 Jun 1986

5120-14-429-7210
Seal Inserter

144297210
853-290-067-0: RNCC: 3 | RNVC: 2

8 Feb 1989

5120-14-418-1890
Mechanical Puller

144181890
332A93-3910-00: RNCC: 3 | RNVC: 2

6 Aug 1987

5120-14-508-1790
Drive Pin Punch

145081790
682-43160-01: RNCC: 3 | RNVC: 2

26 Aug 1998

5120-14-292-3212
Hand Hydraulic Jack

142923212
4861-15T: RNCC: 3 | RNVC: 9

1 Jan 1972

5120-14-539-9775
Rivet Bucking Bar

145399775
BC-487: RNCC: 3 | RNVC: 2

25 Feb 2004

5120-14-424-8808
Seal Inserter

144248808
851-500-466-0: RNCC: 3 | RNVC: 2

9 Jun 1988

5120-14-375-3656
Inspection Mirror

143753656
834.R1: RNCC: 3 | RNVC: 2
834R1: RNCC: 5 | RNVC: 2
91579755: RNCC: 5 | RNVC: 2
162-5868: RNCC: 5 | RNVC: 2
3148512068280: RNCC: 5 | RNVC: 2
0071857Y00: RNCC: 5 | RNVC: 2
834R1: RNCC: 5 | RNVC: 2
0206828: RNCC: 5 | RNVC: 9
FACOM834.R1: RNCC: 5 | RNVC: 9

26 Feb 1982

5120-14-328-5220
Mechanical Puller

143285220
30-111213: RNCC: 3 | RNVC: 9

2 Jul 1975

5120-14-352-5444
Box Wrench

143525444
0M588: RNCC: 3 | RNVC: 2
0M588: RNCC: 5 | RNVC: 2

16 Oct 1978

5120-14-366-8460
Driftpin

143668460
30MS087-802GZ: RNCC: 3 | RNVC: 2

20 Nov 1980

5120-14-204-9179
Hammer Handle

142049179
B54-522-400: RNCC: 2 | RNVC: 2

1 Jan 1963

5120-14-319-6882
Box Wrench

143196882
G1-15-657: RNCC: 3 | RNVC: 2
G1-15657: RNCC: 5 | RNVC: 2
G1-15-657: RNCC: 5 | RNVC: 2
G1-15657: RNCC: 5 | RNVC: 2
85-101-0432: RNCC: 6 | RNVC: 9

1 Jan 1975

5120-14-357-1357
Box Wrench

143571357
9970-115-658: RNCC: 3 | RNVC: 2

7 Jun 1979

5120-14-304-4053
Box Wrench

143044053
TMY20-28-301: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-458-1604
Pipe Wrench

144581604
E181011: RNCC: 3 | RNVC: 2
181011: RNCC: 5 | RNVC: 2
85-693-5765: RNCC: 6 | RNVC: 9

8 Oct 1992

5120-14-288-6988
Mechanical Puller

142886988
D1553-4827: RNCC: 3 | RNVC: 2
D1553-4827: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-529-8983
Mechanical Puller

145298983
TO/A33000408: RNCC: 3 | RNVC: 2

17 Apr 2002

5120-14-527-7158
Seal Inserter

145277158
888-491-200-1: RNCC: 3 | RNVC: 2

14 Nov 2001

5120-14-517-7413
Seal Inserter

145177413
851-200-238-0: RNCC: 3 | RNVC: 2

5 Jan 2000

5120-14-481-1760
Socket Wrench

144811760
GS141-11: RNCC: 3 | RNVC: 2

25 Apr 1996

5120-14-224-7457
Socket Wrench

142247457
BE42-10X10: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-430-0759
Socket Wrench

144300759
007225080P: RNCC: 3 | RNVC: 2

1 Mar 1989

5120-14-527-6463
Mechanical Puller

145276463
888-482-200-1: RNCC: 3 | RNVC: 2

7 Nov 2001

5120-14-510-4002
Mechanical Puller

145104002
22-261-17: RNCC: 3 | RNVC: 2
5120AA8023273: RNCC: 6 | RNVC: 9

4 Nov 1998

5120-14-455-0075
Rivet Bucking Bar

144550075
853-600-350-0: RNCC: 3 | RNVC: 2

1 May 1992

5120-14-445-0543
Mechanical Puller

144450543
548082: RNCC: 3 | RNVC: 2

31 Jan 1991

5120-14-294-4083
Mechanical Puller

142944083
8811288000: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-441-2213
Mechanical Puller

144412213
6801V32-2794-20: RNCC: 3 | RNVC: 2

22 Aug 1990

5120-14-464-9331
Box Wrench

144649331
9970-135-146: RNCC: 3 | RNVC: 2

8 Sep 1993

5120-14-355-5998
Hand Hammer Head

143555998
209-24: RNCC: 3 | RNVC: 2
3875-24: RNCC: 3 | RNVC: 9
194-24: RNCC: 5 | RNVC: 9

19 Mar 1979

5120-14-449-4438
Plier Wrench

144494438
521.150: RNCC: 3 | RNVC: 2
3148511822906: RNCC: 5 | RNVC: 2
521-150: RNCC: 5 | RNVC: 2
0182290: RNCC: 5 | RNVC: 9

19 Aug 1991

5120-14-274-8174
Pipe Wrench

142748174
4557-27: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-435-1682
Lamp Extractor

144351682
21331007-01: RNCC: 3 | RNVC: 2
21-331007-01: RNCC: 5 | RNVC: 2
85-694-2061: RNCC: 6 | RNVC: 9

24 Oct 1989

5120-14-338-3785
C Clamp

143383785
143-200: RNCC: 3 | RNVC: 2
0162720: RNCC: 3 | RNVC: 2
449-200: RNCC: 3 | RNVC: 2
3458200: RNCC: 3 | RNVC: 2
960-200: RNCC: 3 | RNVC: 9
271-200: RNCC: 5 | RNVC: 2
271.200: RNCC: 5 | RNVC: 2
3272670270015: RNCC: 5 | RNVC: 2
DEM960-200: RNCC: 5 | RNVC: 9
4231-200: RNCC: 5 | RNVC: 9

6 Nov 1976

5120-14-441-2306
Socket Wrench

144412306
6804V32-2443-00: RNCC: 3 | RNVC: 2

22 Aug 1990

5120-14-523-4186
Paint Strainer

145234186
167-025: RNCC: 3 | RNVC: 2

19 Jan 2001

5120-14-379-2439
Socket Wrench

143792439
RT8205: RNCC: 3 | RNVC: 2
85-691-9759: RNCC: 6 | RNVC: 9

6 Sep 1982

5120-14-506-2589
Socket Wrench

145062589
92.1"1/2SD: RNCC: 3 | RNVC: 2
92 1-1-2: RNCC: 5 | RNVC: 9

16 Apr 1998

5120-14-376-0487
Socket Wrench

143760487
TMY20-21-101: RNCC: 3 | RNVC: 2

30 Mar 1982

5120-14-378-2913
Hand Hammer

143782913
1-54-901-4: RNCC: 3 | RNVC: 2
79522: RNCC: 5 | RNVC: 9

20 Jul 1982

5120-14-441-2371
Crimping Tool Die

144412371
703A93-0900-23: RNCC: 3 | RNVC: 2

22 Aug 1990

5120-14-417-3090
Hand Hammer

144173090
E71-012-28EMC0R: RNCC: 2 | RNVC: 2
0400400301: RNCC: 3 | RNVC: 2
400-400EC: RNCC: 3 | RNVC: 2

1 Jul 1987

5120-14-304-4469
Box Wrench

143044469
20-711-10: RNCC: 3 | RNVC: 2
207-11-10: RNCC: 5 | RNVC: 2

1 Jan 1974

5120-14-526-6951
Drift Pin Set

145266951
312-01730-001: RNCC: 3 | RNVC: 2

24 Aug 2001

5120-14-273-6998
Hand Hammer Head

142736998
E71-015-400: RNCC: 2 | RNVC: 2
200-30: RNCC: 3 | RNVC: 2
0293000: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-483-1189
Box Wrench

144831189
55.9/16X5/8: RNCC: 3 | RNVC: 2
3148511119105: RNCC: 5 | RNVC: 2
0111910: RNCC: 5 | RNVC: 9

9 Aug 1996

5120-14-304-4468
Box Wrench

143044468
20-711-9: RNCC: 3 | RNVC: 2
207-11-9: RNCC: 5 | RNVC: 2

1 Jan 1974

5120-14-322-7736
Socket Wrench

143227736
91-25: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-329-6306
Mechanical Puller

143296306
M31-005: RNCC: 3 | RNVC: 2
M31-005: RNCC: 5 | RNVC: 9

2 Jul 1975

5120-14-525-9356
Mechanical Puller

145259356
888-389-900-1: RNCC: 3 | RNVC: 2

20 Jun 2001

5120-14-322-7735
Socket Wrench

143227735
91-23: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-238-6758
Mechanical Puller

142386758
B3C316646: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-269-2331
Box Wrench

142692331
50.71: RNCC: 3 | RNVC: 2
108-71: RNCC: 3 | RNVC: 2
119-71: RNCC: 3 | RNVC: 9
91612179: RNCC: 5 | RNVC: 2
50-71: RNCC: 5 | RNVC: 2
3148511069707: RNCC: 5 | RNVC: 2
3272670237629: RNCC: 5 | RNVC: 2
DEM119-71: RNCC: 5 | RNVC: 9
0106970: RNCC: 5 | RNVC: 9

1 Jan 1970

5120-14-222-7494
Box Wrench

142227494
56 3-8X7-16: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-479-0325
Mechanical Puller

144790325
888-381-300-1: RNCC: 3 | RNVC: 2

6 Dec 1995

5120-14-316-5605
Driftpin

143165605
3210-94-27-005-1: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-551-5791
Screw Extractor

145515791
8EE88103000: RNCC: 3 | RNVC: 2
01.42.55.93: RNCC: 5 | RNVC: 2
E-881 3: RNCC: 5 | RNVC: 2
E-881-3: RNCC: 5 | RNVC: 2

5 Oct 2006

5120-14-517-3813
Mechanical Puller

145173813
0XB501-009-303-27: RNCC: 3 | RNVC: 2

8 Dec 1999

5120-14-274-3696
Jeweler's Burnisher

142743696
23002676: RNCC: 3 | RNVC: 2
35-273: RNCC: 5 | RNVC: 2
188606: RNCC: 5 | RNVC: 2
20188606-8: RNCC: 5 | RNVC: 2
23002676-3: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-464-2473
Drill Guide

144642473
854-500-385-0: RNCC: 3 | RNVC: 2

28 Jul 1993

5120-14-299-0778
Hand Screw Jack

142990778
330A91-0181-01: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-505-9266
Mechanical Puller

145059266
H117166: RNCC: 3 | RNVC: 2

30 Mar 1998

5120-14-273-6979
Hand Hammer Head

142736979
E71-014-2000: RNCC: 2 | RNVC: 2
2-2000: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-235-7565
Socket Wrench

142357565
NO PRIMARY REF14-235-7565: RNCC: 3 | RNVC: 2
2553412: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-545-0968
Hand Bellows

145450968
215511-0: RNCC: 3 | RNVC: 2

17 Mar 2005

5120-14-332-0368
Open End Box Wrench

143320368
104N21X23: RNCC: 3 | RNVC: 2
104-N-21X23: RNCC: 3 | RNVC: 2
3272670228658: RNCC: 5 | RNVC: 2
104N21X23: RNCC: 5 | RNVC: 2
104N21X23: RNCC: 5 | RNVC: 2

2 Jul 1975

5120-14-279-5886
Ratchet Wrench

142795886
13-62A62TER14: RNCC: 2 | RNVC: 2
2786-14: RNCC: 3 | RNVC: 2
323-10DR0ITEETGAUCHE14: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-257-4131
Ratchet Wrench

142574131
NO PRIMARY REF14-257-4131: RNCC: 3 | RNVC: 2
144K134: RNCC: 5 | RNVC: 9

1 Jan 1969

5120-14-296-0187
Aligning Punch

142960187
AMPC0P54: RNCC: 3 | RNVC: 9

1 Jan 1973

5120-14-325-4226
Box Wrench Set

143254226
55.JE12: RNCC: 3 | RNVC: 2
55JE12: RNCC: 5 | RNVC: 2
3148515306402: RNCC: 5 | RNVC: 2
0530640: RNCC: 5 | RNVC: 9

2 Jul 1975

5120-14-469-9067
Socket Wrench

144699067
72.14VSE: RNCC: 3 | RNVC: 2
3148511167861: RNCC: 5 | RNVC: 2
0116840: RNCC: 5 | RNVC: 9

18 May 1994

5120-14-527-9165
Mechanical Puller

145279165
888-504-700-1: RNCC: 3 | RNVC: 2

28 Nov 2001

5120-14-539-8369
Box Wrench

145398369
93210: RNCC: 3 | RNVC: 2
SYQ4746: RNCC: 5 | RNVC: 2

11 Feb 2004

5120-14-452-3433
Hand Hydraulic Jack

144523433
110CT: RNCC: 3 | RNVC: 9
5000610107: RNCC: 5 | RNVC: 2
5000791118: RNCC: 5 | RNVC: 2
91629132: RNCC: 5 | RNVC: 2
RAS110CT: RNCC: 5 | RNVC: 9
CT10: RNCC: 5 | RNVC: 9

8 Jan 1992

5120-14-451-7779
Piston Inserter

144517779
600046: RNCC: 3 | RNVC: 2

4 Dec 1991

5120-14-274-8280
Hand Melting Ladle

142748280
NO PRIMARY REF14-274-8280: RNCC: 3 | RNVC: 2
124-160-3: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-451-4119
Screw Extractor

144514119
885.EH3: RNCC: 3 | RNVC: 2
3148512104957: RNCC: 5 | RNVC: 2
885EH3: RNCC: 5 | RNVC: 2
91627174: RNCC: 5 | RNVC: 2
0690 141 3: RNCC: 5 | RNVC: 2
0210495: RNCC: 5 | RNVC: 9

19 Nov 1991

5120-14-540-0001
Mechanical Puller

145400001
AC21816100: RNCC: 3 | RNVC: 2

25 Feb 2004

5120-14-541-8057
Stud Remover

145418057
T281G3001124: RNCC: 3 | RNVC: 2

26 Jun 2004

5120-14-450-4030
Socket Wrench

144504030
NO PRIMARY REF14-450-4030: RNCC: 3 | RNVC: 2
BL53972: RNCC: 5 | RNVC: 9

3 Oct 1991

5120-14-312-9110
Mechanical Puller

143129110
121E95-102-60-0: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-517-6077
Mechanical Puller

145176077
899753: RNCC: 3 | RNVC: 2
7M863: RNCC: 3 | RNVC: 2

5 Jan 2000

5120-14-536-8397
Stake Remover

145368397
63766: RNCC: 3 | RNVC: 2

17 Sep 2003

5120-14-422-7313
Box Wrench

144227313
8814487000: RNCC: 3 | RNVC: 2

17 Mar 1988

5120-14-340-1475
Mechanical Puller

143401475
B252FS105APL2REP1: RNCC: 3 | RNVC: 2

18 Jan 1977

5120-14-200-2095
Socket Wrench

142002095
9475U: RNCC: 3 | RNVC: 2
8000153900: RNCC: 5 | RNVC: 2

1 Jan 1962

5120-14-545-6528
Hand Vise

145456528
09419: RNCC: 3 | RNVC: 2

26 Apr 2005

5120-14-446-2881
Hand Hammer

144462881
1-26P1: RNCC: 3 | RNVC: 2
7276: RNCC: 5 | RNVC: 2

12 Mar 1991

5120-14-234-3650
Socket Wrench

142343650
0000330477: RNCC: 3 | RNVC: 2
330477: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-523-8311
Hand Hammer

145238311
767845X: RNCC: 3 | RNVC: 2

6 Feb 2001

5120-14-521-6367
C Clamp

145216367
271A.40: RNCC: 3 | RNVC: 2
SYQ0798: RNCC: 5 | RNVC: 2
0162601: RNCC: 5 | RNVC: 9

30 Aug 2000

5120-14-527-6464
Mechanical Puller

145276464
888-482-300-1: RNCC: 3 | RNVC: 2

7 Nov 2001

5120-14-304-9303
Drive Pin Punch

143049303
NO PRIMARY REF14-304-9303: RNCC: 3 | RNVC: 2
130004: RNCC: 5 | RNVC: 2
0160080: RNCC: 5 | RNVC: 2
251-3: RNCC: 5 | RNVC: 2
251.3: RNCC: 5 | RNVC: 2
6-30: RNCC: 5 | RNVC: 2
91520133: RNCC: 5 | RNVC: 2

1 Jan 1974

5120-14-407-2046
Seal Inserter

144072046
100773: RNCC: 3 | RNVC: 2

12 Feb 1986

5120-14-431-4018
Mechanical Puller

144314018
44652: RNCC: 3 | RNVC: 2

17 Apr 1989

5120-14-526-8760
Socket Wrench Set

145268760
S.447DR: RNCC: 3 | RNVC: 2
3148515168505: RNCC: 5 | RNVC: 2
S447DR: RNCC: 5 | RNVC: 2

12 Sep 2001

5120-14-419-1692
Socket Wrench

144191692
NO PRIMARY REF14-419-1692: RNCC: 3 | RNVC: 2
108296: RNCC: 5 | RNVC: 9

8 Oct 1987

5120-14-552-0477
Socket Wrench

145520477
99C.17: RNCC: 3 | RNVC: 2
00.39.94.17: RNCC: 5 | RNVC: 2
MO003046: RNCC: 6 | RNVC: 9

22 Nov 2006

5120-14-366-8442
Socket Wrench

143668442
MHJ234-41: RNCC: 3 | RNVC: 2
UHJ234-41: RNCC: 5 | RNVC: 2

20 Nov 1980

5120-14-380-6767
Hand Hammer

143806767
E71-015-2500EMC0R: RNCC: 2 | RNVC: 2
200-60EC: RNCC: 3 | RNVC: 2
0200600301: RNCC: 3 | RNVC: 2
200-2500EC: RNCC: 5 | RNVC: 2
E71-015-60EMC0R: RNCC: 5 | RNVC: 2

29 Nov 1982

5120-14-460-2883
Mechanical Puller

144602883
853-203-148-0: RNCC: 3 | RNVC: 2

21 Jan 1993

5120-14-364-6356
Hand Rivet Set

143646356
067316: RNCC: 3 | RNVC: 2
XG1-16TGS: RNCC: 5 | RNVC: 2

2 Sep 1980

5120-14-328-4721
Open End Box Wrench

143284721
GSM196-010F66: RNCC: 3 | RNVC: 2
GSM196-10F66: RNCC: 5 | RNVC: 2

2 Jul 1975

5120-14-040-7558
Hand Hydraulic Jack

140407558
P2393: RNCC: 3 | RNVC: 2
CM10THF300C500A100: RNCC: 5 | RNVC: 2
1730AA8100123: RNCC: 6 | RNVC: 9
85-455-6770: RNCC: 6 | RNVC: 9

1 Jan 1972

5120-14-533-1418
Seal Inserter

145331418
888-452-012-0: RNCC: 3 | RNVC: 2

23 Jan 2003

5120-14-235-3896
Blacksmiths' Tongs

142353896
M0B31-600: RNCC: 3 | RNVC: 2
130515: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-300-9660
Mechanical Puller

143009660
341A93-3514-00: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-311-1687
Socket Wrench

143111687
76.38: RNCC: 3 | RNVC: 2
76-38: RNCC: 5 | RNVC: 2
3148511211007: RNCC: 5 | RNVC: 2
91396334: RNCC: 5 | RNVC: 2
0121100: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-456-8477
Crimping Tool Die

144568477
58422-1: RNCC: 3 | RNVC: 2
85-694-6217: RNCC: 6 | RNVC: 9

24 Jul 1992

5120-14-258-2506
Mechanical Puller

142582506
NO PRIMARY REF14-258-2506: RNCC: 3 | RNVC: 2
530185FA: RNCC: 5 | RNVC: 2
570420: RNCC: 5 | RNVC: 2
FEYH01032: RNCC: 5 | RNVC: 2

1 Jan 1969

5120-14-366-8464
Driftpin

143668464
30MS087-806D: RNCC: 3 | RNVC: 2

20 Nov 1980

5120-14-322-7747
Socket Wrench

143227747
91-29: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-527-7126
Seal Inserter

145277126
888-486-400-1: RNCC: 3 | RNVC: 2

14 Nov 2001

5120-14-455-0087
Hand Rivet Set

144550087
853-620-037-0: RNCC: 3 | RNVC: 2

1 May 1992

5120-14-359-0452
Socket Wrench

143590452
75.1'1/16: RNCC: 3 | RNVC: 2
3148511204801: RNCC: 5 | RNVC: 2
75-1 1-16: RNCC: 5 | RNVC: 2
75-1-1-16: RNCC: 5 | RNVC: 2
0120480: RNCC: 5 | RNVC: 9

7 Sep 1979

5120-14-480-2678
Open End Box Wrench

144802678
888-363-100-1: RNCC: 3 | RNVC: 2

28 Feb 1996

5120-14-457-7331
Socket Wrench

144577331
0372-42-10197: RNCC: 3 | RNVC: 2

17 Sep 1992

5120-14-304-4057
Box Wrench

143044057
TMY20-28-305: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-260-3550
Drive Pin Punch

142603550
3130-95-66-002-1: RNCC: 3 | RNVC: 2

1 Jan 1970

Load More Results