What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.

A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Blacksmith's Punch?

A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Mechanical Finger?

A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.

A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Screwdriver And Wrench Assembly?

A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Stakeholder Bench Plate?

A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.

What is a Drill Drift?

A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.

A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Digging Bar?

A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

What is a Valve Spring Lifter?

A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.

What is a Fuse Puller?

A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.

Hand Tools, Nonedged, Nonpowered - France (FR)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by France (FR) - NCB is 14

Page 11 of 110

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by France

51	20	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - France (FR)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 16 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Pipe Vise? 19 Items: A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.
What is a Hand Vise? 25 Items: A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.
What is a Hand Hydraulic Jack? 133 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 153 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 903 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 17 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
Swage,Bottom,Blacksmith's 10 Items
What is a Hand Tube Flaring Tool? 23 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Blacksmith's Punch? 12 Items: A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.
What is a Drain Plug Wrench? 45 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 57 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 16 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 3829 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
Flatter,Blacksmith's 18 Items
Swage,Top,Blacksmith's 12 Items
What is a Pipe Wrench? 110 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 149 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 53 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
Screwdriver,Offset 54 Items
What is a Screwdriver Bit? 707 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Mechanical Finger? 25 Items: A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.
What is a Socket Wrench Socket? 1803 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 1412 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 1641 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 52 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 565 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
Jack,Push-Pull,Screw 30 Items
What is a Hand Tube Bender? 54 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 1106 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 55 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pinch Bar? 19 Items: A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.
What is a Pry Bar? 17 Items: A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.
What is a Wrecking Bar? 15 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 273 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 413 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 32 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 295 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
Face,Hammer,Inserted 25 Items
What is a Hole Sheet Metal Holder? 37 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Screwdriver And Wrench Assembly? 11 Items: A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.
What is a Hand Rivet Set? 121 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Stakeholder Bench Plate? 22 Items: A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.
What is a Drill Drift? 32 Items: A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.
What is a Tack Claw? 15 Items: A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.
Mattock 28 Items
What is a Socket Wrench Handle Bar? 108 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Stake,Sheet Metalworking 50 Items
Riveter,Blind,Hand 76 Items
What is a Hand Shovel? 43 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 98 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 30 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
What is a Digging Bar? 20 Items: A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.
Block,Dolly,Sheet Metalworking 56 Items
What is a Piston Ring Compressor? 34 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Valve Spring Lifter? 29 Items: A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.
What is a Fuse Puller? 20 Items: A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.
What is a Hand Lead Seal Press? 18 Items: A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.
What is a Hand Beading Tool? 91 Items: A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.
What is a Hand Hammer? 502 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
Head,Hand Hammer 81 Items
What is a Lamp Extractor? 76 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Tube Packing Ring Installing Tool? 29 Items: A Tube Packing Ring Installing Tool (INSTALLING TOOL,TUBE PACKING RING) is an item designed to insert packing rings on tubes within tube sheets on condensers and similar heat exchangers. In operation, the packing rings are assembled on the loading pin mandrel and are then transferred from the mandrel on to the tube by means of a tubular sleeve which slides on the mandrel.
What is a Carpenters' Pincers? 18 Items: A Carpenters' Pincers (PINCERS,CARPENTERS') is a plierlike hand tool having two opposing jaws which may have hammerlike backs. One handle has a nail or tack pulling claw, the other is shaped to form a screwdriver. The tool may contain a wire cutter. See also NIPPERS, END CUTTING and PINCERS, FARRIERS'.
What is a Trowel? 33 Items: A Trowel is a tool used for bricklaying, concrete work, plastering, linoleum laying, and masonry work. Excludes CORNER TOOL, CONCRETE.
What is a Hand Abrasive Wheel Dresser? 12 Items: A Hand Abrasive Wheel Dresser (DRESSER,ABRASIVE WHEEL,HAND) is a tool designed to remove glaze from, dress, shape, sharpen, and true solid abrasive wheels. Excludes NIB, DIAMOND, WHEEL DRESSING.
What is a Lamp Cap Extractor? 32 Items: A Lamp Cap Extractor (EXTRACTOR,LAMP CAP) is a tool specifically designed to facilitate the removal of lamp caps from switchboards, panels or indicator lamps.
What is a Rivet Bucking Bar? 51 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 86 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 277 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Woven Cable Grip? 23 Items: A Woven Cable Grip (GRIP,CABLE,WOVEN) is a braided wire device designed to clutch a bare or insulated conductor, cable or wire rope, for holding taut or drawing through conduit.
What is a Screw Thread Insert Extractor? 19 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is an Electron Tube Extractor? 18 Items: An Electron Tube Extractor (EXTRACTOR,ELECTRON TUBE) is a hand tool designed to facilitate the removal of electron tubes from electronic equipment and to avoid burning the fingers. It may be used for installing tubes.
What is a Cross Tip Screwdriver? 362 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 21 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 11 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 37 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Tool Handle Wedge? 10 Items: A Tool Handle Wedge (WEDGE,TOOL HANDLE) is excludes WEDGE, WOOD.
What is a Marlinespike? 16 Items: A Marlinespike is a metal hand tool made in the shape of a tapered pin. One end is pointed and the opposite end may be headed. The body may contain an eye for a lanyard sling, or be grooved lengthwise. Excludes CABLE PICK and FID.
What is an Aligning Punch? 272 Items: An Aligning Punch (PUNCH,ALIGNING) is a round, square, hexagonal or octagonal bodied hand tool, having a round tapered section 6-1/2 inches (165.1 mm) or more in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, DRIFT and DRIFTPIN.
What is a Drift Punch? 25 Items: A Drift Punch (PUNCH,DRIFT) is a round, square, hexagonal, or octagonal bodied hand tool, having a round tapered section 4 to 6 inches (101.6 mm to 152.4 mm) inclusive in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, ALIGNING; and DRIFTPIN.
What is a Putty Knife? 36 Items: A Putty Knife (KNIFE,PUTTY) is a hand tool with a nonedged blade fixed to a handle for laying on and smoothing putty and the like.
What is a Socket Wrench Adapter-Extension? 40 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 30 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 184 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Socket Wrench Ratchet Attachment? 47 Items: A Socket Wrench Ratchet Attachment (RATCHET ATTACHMENT,SOCKET WRENCH) is a connection for socket wrenches and handles. Consists of a ratcheting mechanism with an internal drive on one end and an external drive on the opposite end of the same size. The item is designed to permit continuous rotation of the socket in one direction without removing the socket or handle and without a complete rotation of the handle.
What is a Wrench Extension Handle? 81 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Socket Wrench Crowfoot Attachment? 155 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 33 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 43 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 48 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 2394 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 372 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 300 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 661 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 32 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand-Operated Grommet And Eyelet Press? 12 Items: A Hand-Operated Grommet And Eyelet Press (PRESS,GROMMET AND EYELET,HAND-OPERATED) is a device which punches or pierces holes and in addition fastens or sets eyelets and grommets in cloth, paper and similar material. May be used for fastening or setting rivets, lacing hooks and snaps in cloth, paper and similar material. It is hand operated by lever or screw action. See also PUNCH, EYELET, PLIER TYPE and PRESS, GROMMET AND EYELET, FOOT OPERATED.
What is a Claw Bar? 19 Items: A Claw Bar (BAR,CLAW) is before using, refer to Reference Drawing Group AG.
What is a Shock Type Wheel Stud Nut Wrench? 11 Items: A Shock Type Wheel Stud Nut Wrench (WRENCH,WHEEL STUD NUT,SHOCK TYPE) is a manually operated item designed to remove wheel stud nuts. In operation the inner nut is turned by a socket attached to a shaft on which is a loose swinging weighted handle. The weighted handle may be swung quickly to provide an impact force against the socket to loosen the seized or jammed nuts. The outer nut is held stationary by a separate hexagonal holding wrench.
What is a Drift Pin Set? 30 Items: A Drift Pin Set is a group of DRIFTPIN having different characteristics.
What is a Tire Iron? 25 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 115 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Blacksmith's Vise? 14 Items: A Blacksmith's Vise (VISE,BLACKSMITH'S) is a clamping device consisting of a mounting plate, one stationary and one manual screw actuated jaw and a supporting member extending downward from the stationary jaw to the floor. Designed to be mounted on a bench, table or the like. May include pipe holding jaws.
What is a Machinist's Vise? 64 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Clamp Base Bench Vise? 10 Items: A Clamp Base Bench Vise (VISE,BENCH,CLAMP BASE) is a clamping device consisting of a base, one stationary and one manual screw actuated jaw, and one or more guide bars or rods. Designed with an integral clamp for attaching to a bench, table, or the like. Does not include pipe holding jaws.
What is a Fixed Open End Wrench Set? 86 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Nail Set? 11 Items: A Nail Set is a round knurled, square, hexagonal or octagonal bodied hand tool having a round tapered section terminating in a cupped point. It is designed to set brad head nails below the surface by striking it a hammerlike blow. See also PUNCH, DRIVE PIN.
What is a Socket Wrench Set? 202 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is an Open End Box Wrench Set? 10 Items: An Open End Box Wrench Set (WRENCH SET,OPEN END BOX) is a group of WRENCH, OPEN END BOX having different characteristics.
What is a Combination Box And Open End Wrench Set? 72 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Box Wrench Set? 36 Items: A Box Wrench Set (WRENCH SET,BOX) is a group of box wrenches having different characteristics. It may include a HANDLE, EXTENSION WRENCH. See also WRENCH SET, COMBINATION, BOX AND OPEN END.
What is a Hot Line Stick? 26 Items: A Hot Line Stick is a hand tool consisting of a straight, round stick (pole) made of a suitable nonconductive material with a tool fixed to one end. The other end may be plain or have a butt mounting device fixed to it. Various types of attachments (hooks, rings, and bands) may be fixed to the body. It is designed for use in the repair and maintenance of live high voltage aerial lines. Excludes hot line sticks without heads.
Handle,Mattock-Pick 15 Items
What is a Wrench Kit? 73 Items: A Wrench Kit is an assortment of various types and sizes of wrenches such as SOCKET, SOCKET WRENCH; WRENCH, OPEN END, FIXED; WRENCH, BOX and the like. It may include adapter(s), ratchet(s) and the like. See also WRENCH SET (as modified.
What is a Brad Awl? 15 Items: A Brad Awl (AWL,BRAD) is a small, pointed tool used by shoemakers, saddlers, cabinetmakers, and the like for piercing small holes in wood, leather, and similar materials, and consists of a handle with a ferrule and a blade. The blade is round, terminating in a beveled, sharp straight edge and has a shank which passes through the center of the handle.
What is a Scratch Awl? 20 Items: A Scratch Awl (AWL,SCRATCH) is an item whose nominal length of blade is less than 4 inches (101.6 millimeters) and is provided with a nondetachable handle.
What is a Screw Extractor Set? 10 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 102 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
Jack,Scissors,Hand 26 Items
What is a Piston Ring Expander? 23 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
Mallet,Plastic 62 Items
Mallet,Rubber 10 Items
What is a Wood Mallet? 37 Items: A Wood Mallet (MALLET,WOOD) is excludes MALLET, CALKING; MALLET, HAWSING and MALLET, SERVING.
What is a Rack Bar Jack? 30 Items: A Rack Bar Jack (JACK,RACK BAR) is excludes JACK, BUMPER and JACK, REEL, HAND.
What is a Pneumatic Tire Valve Core Inserter And Remover? 14 Items: A Pneumatic Tire Valve Core Inserter And Remover (INSERTER AND REMOVER,PNEUMATIC TIRE VALVE CORE) is a bar of steel having a small cylindrical slotted end for removing or installing a valve core in a valve stem by a screwing motion. See also REPAIR TOOL, PNEUMATIC TIRE VALVE.
What is a Hand Tube Swaging Tool Kit? 20 Items: A Hand Tube Swaging Tool Kit (SWAGING TOOL KIT,TUBE,HAND) is a hand-operated noncutting tool consisting of one or more PUNCH, TUBE SWAGING, HAND and a tube flaring bar.
What is a Hand Tube Flaring Punch? 11 Items: A Hand Tube Flaring Punch (PUNCH,TUBE FLARING,HAND) is a noncutting tool having a shaped end or section designed to flare the ends of tubes. One type is designed to flare the ends of tubes against a tube sheet, and another to flare tube ends to mate with tube fittings. Includes punch components of FLARING TOOL, TUBE, HAND.
What is a Hose Strap Band Clamping Tool? 26 Items: A Hose Strap Band Clamping Tool (CLAMPING TOOL,STRAP BAND,HOSE) is an item designed to tension and lock metal straps around a rubber hose, and the like. It is also used to clamp and hold fittings therein.
What is a Mechanical Puller? 3073 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 470 Items
What is a Slip Joint Pliers? 84 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Brake Repair Pliers? 14 Items: A Brake Repair Pliers (PLIERS,BRAKE REPAIR) is a tool having jaws designed for use in brake repair operations, such as removing and replacing items such as keys, springs, and the like. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 226 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 12 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 81 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 56 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 15 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 11 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 29 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Cross Tip Screwdriver Set? 14 Items: A Cross Tip Screwdriver Set (SCREWDRIVER SET,CROSS TIP) is a group of SCREWDRIVER, CROSS TIP having different characteristics.
What is a Spanner Wrench Set? 18 Items: A Spanner Wrench Set (WRENCH SET,SPANNER) is a group of items under WRENCH, SPANNER having different characteristics.
What is a Drive Pin Punch Set? 31 Items: A Drive Pin Punch Set (PUNCH SET,DRIVE PIN) is a group of PUNCH, DRIVE PIN having different characteristics.
What is an Aligning Punch Set? 13 Items: An Aligning Punch Set (PUNCH SET,ALIGNING) is a group of PUNCH, ALIGNING having different characteristics. See also DRIFTPIN SET.
What is a Slugging Type Box Wrench Socket? 16 Items: A Slugging Type Box Wrench Socket (SOCKET,SLUGGING TYPE BOX WRENCH) is an item having a hexagonal external drive at one end, made to fit into the internal hexagonal or 12-point opening of a slugging type box wrench. The opposite end has a single-broached hexagonal opening of the same size as the external drive. The item is designed with extra thick walls to withstand the impact of sledge blows on the driving wrench.
What is a Mechanical Puller Step Plate? 44 Items: A Mechanical Puller Step Plate (STEP PLATE,MECHANICAL PULLER) is a circular disk, flanged to provide a shoulder, and designed to provide a base for the screw point of a PULLER, MECHANICAL when pulling externally mounted bearings, gears, and the like from hollow shafts or housings. It has a concentric, countersunk hole to accommodate the puller screw point.
What is a Solid Center Punch? 79 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Cable Type Ratchet Lever Puller? 20 Items: A Cable Type Ratchet Lever Puller (PULLER,RATCHET LEVER,CABLE TYPE) is an item consisting of a metal frame and ratchet lever reel to which is attached one end of a flexible cable (wire rope). The cable feeds through the fast eye in the metal frame, and may be reeved through a slip hook tackle hook. See also BINDER, LOAD; HOIST, WIRE ROPE and STRETCHER, WIRE.
What is an Electronic Equipment Tuning Wand? 18 Items: An Electronic Equipment Tuning Wand (TUNING WAND,ELECTRONIC EQUIPMENT) is a hand-held rod used in determining the adjustment of the windings of a radio frequency coil. It is made of insulating material with iron on one end and brass on the other end. By inserting the iron end in the coil, the inductance is increased and by inserting the brass end, the inductance is decreased.
What is a Combination Open End And Spanner Wrench? 14 Items: A Combination Open End And Spanner Wrench (WRENCH,OPEN END AND SPANNER,COMBINATION) is a tool having open end wrench characteristics at one end and spanner wrench features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s) at the other end.
What is a Detent Handling Tool? 187 Items: A Detent Handling Tool (HANDLING TOOL,DETENT) is a specially designed handling tool consisting of a rigid bar with a T-handle on one end. The other end is equipped with threads designed to mate the threads of a detent to facilitate inserting or extracting.
What is a Hand Material Handling Hook? 23 Items: A Hand Material Handling Hook (HOOK,MATERIAL HANDLING,HAND) is a hook whose curved end conforms to Style AP1, AP2, AP3 or AP4 of Reference Drawing Group AP. Excludes HOOK, MANHOLE COVER, HAND; HOOK, WIRE BREAKING, HAND; HOOK, ROCK CRUSHER FEEDING, HAND; HOOK, STRAINER REMOVING, HAND and HOOKS, BAG HANDLING, HAND.
What is a Magnetic Retrieving Tool? 11 Items: A Magnetic Retrieving Tool (RETRIEVING TOOL,MAGNETIC) is a hand-operated magnetic device used to locate and pick up metallic articles, such as bolts, nuts, pins, washers, and the like, in confined spaces. It may be rigid, flexible or adjustable. Excludes FINGER, MECHANICAL.
What is a Mechanical Puller Adapter? 78 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Combination Box And Open End Box Wrench? 13 Items: A Combination Box And Open End Box Wrench (WRENCH,BOX AND OPEN END BOX,COMBINATION) is a double end wrench, box and open end box, primarily designed for removing or replacing tube fittings. The opening in the open end box may be machined at an angle from the longitudinal center line of the wrench.
What is a Screw Thread Insert Inserter? 136 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Flat Tip Screwdriver Set? 48 Items: A Flat Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP) is a group of SCREWDRIVER, FLAT TIP having different characteristics.
What is a Terminal Crimping Tool Contact Positioner? 89 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 16 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is an Adjustable Wrench? 138 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 239 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 75 Items
Handle,Shovel 10 Items
What is a Socket Wrench Spanner Attachment? 88 Items: A Socket Wrench Spanner Attachment (SPANNER ATTACHMENT,SOCKET WRENCH) is an item having an adjustable or fixed span with pin, hook, or key type end that is used to fit and turn various size retaining rings, cover plates, plugs, couplings, and like parts. Usually designed to be driven by a male driver.
What is a Retaining Ring Installation Tool? 44 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Tacker? 16 Items: A Tacker is a hand-operated, hammerlike or gunlike item without a clincher, used to drive preformed connecting elements like pins, nails or staples through one object or piece of material into another. Excludes STAPLER (as modified).
What is a Bearing And Bushing Inserter? 290 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 207 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 939 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 14 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 93 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 161 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 94 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 141 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 53 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Six Point Tip Screwdriver? 155 Items: A Six Point Tip Screwdriver (SCREWDRIVER,SIX POINT TIP) is a manual screwdriver having a single nonremoveable blade having a tip with six rounded points.
What is a Seal Inserter And Remover? 147 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 478 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is a Preformed Packing Inserter And Remover? 34 Items: A Preformed Packing Inserter And Remover (INSERTER AND REMOVER,PREFORMED PACKING) is a hand tool designed to install and remove a PACKING, PREFORMED.
What is a Pin Remover? 34 Items: A Pin Remover (REMOVER,PIN) is a hand tool designed to facilitate the removal of a pin from a hole.
What is a Pin Inserter And Remover? 13 Items: A Pin Inserter And Remover (INSERTER AND REMOVER,PIN) is a rodlike tool designed to facilitate the insertion and removal of a pin from a hole.
What is an Electrical Contact Inserter And Remover? 37 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Piston Inserter? 40 Items: A Piston Inserter (INSERTER,PISTON) is a tool designed to permit installation of a piston or piston assembly without damaging the packings or piston.
What is a Spring Inserter And Remover? 85 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 13 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Stud Inserter? 22 Items: A Stud Inserter (INSERTER,STUD) is a device designed to drive in studs. It does not have any facilities for removing or extracting studs. See also INSERTER AND REMOVER, STUD.
What is a Stud Inserter And Remover? 17 Items: A Stud Inserter And Remover (INSERTER AND REMOVER,STUD) is a group of items designed to extract and to drive studs. It may include collets, guides, housings, holders and the like. See also REMOVER SET, STUD and INSERTER, STUD.
What is a Gear Inserter? 54 Items: A Gear Inserter (INSERTER,GEAR) is a hand tool designed to install various gears onto a gearshaft. It may be operated by a pushing or a striking force.
What is a Crimping Tool Die? 73 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is an Electrical Connector Inserter? 45 Items: An Electrical Connector Inserter (INSERTER,ELECTRICAL CONNECTOR) is a hand tool designed to hold an electrical connector, and to assist in the positioning and installation of the connector on a cover, panel or the like.
What is a Float? 12 Items: A Float is a tool used for concrete, plastering and grouting work.
What is a Mechanical Puller Set? 19 Items: A Mechanical Puller Set (PULLER SET,MECHANICAL) is two or more separate PULLER, MECHANICAL of different fixed sizes.
What is a Lifting Pneumatic Bag? 11 Items: A Lifting Pneumatic Bag (PNEUMATIC BAG,LIFTING) is a device made of flexible material designed to lift another item by being placed under the item and being inflated with air or some other gas. It will have a means of being connected to an air or gas source and may include a connector hose, a control valve and/or a pressure regulator.
What is a Cable Tie Installation Tool? 22 Items: A Cable Tie Installation Tool (INSTALLATION TOOL,CABLE TIE) is a lightweight, hand-held, hand-operated tool designed to fasten cable ties, straps and the like. Cable tie is inserted into the nose of the tool flush to the cable tie head. Trigger handle tightens cable tie and cuts off any excess. These installation tools are available in a variety of sizes depending on their intended use with miniature, intermediate, standard, heavy or extra heavy cross section ties.
What is a Bearing Staking Installation Tool? 159 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
Wrench Set,Ratchet 15 Items
What is a Sealant Dispenser? 26 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Retaining Ring Pliers Set? 10 Items: A Retaining Ring Pliers Set (PLIERS SET,RETAINING RING) is a group of PLIERS, RETAINING RING having different characteristics.
What is a Hand Armament Subsystem Carrier? 52 Items: A Hand Armament Subsystem Carrier (CARRIER,ARMAMENT SUBSYSTEM,HAND) is a metallic item with a clamp device and/or space for depositing articles. It is used for transporting weapon parts during maintanence and/or repair work, such as gun barrel, automatic loader, breechblock and the like.
What is a Ring Retaining Pliers Tip Set? 13 Items: A Ring Retaining Pliers Tip Set (TIP SET,PLIERS,RING RETAINING) is a collection of removable metallic tips in matched pairs used to provide various size capablities to PLIERS, RING RETAINING which permits the removal and installation of internal and external retaining rings.
What is a Plug Electrical Connector Extractor? 45 Items: A Plug Electrical Connector Extractor (EXTRACTOR,ELECTRICAL CONNECTOR,PLUG) is a hand tool designed to disassemble CONNECTOR, PLUG, ELECTRICAL from a CONNECTOR, RECEPTACLE, ELECTRICAL.
What is a Torque Wrench Adapter Set? 10 Items: A Torque Wrench Adapter Set (ADAPTER SET,TORQUE WRENCH) is tWO or more ADAPTER, TORQUE WRENCH of different sizes.
What is an Electronic Component Inserter And Remover? 79 Items: An Electronic Component Inserter And Remover (INSERTER AND REMOVER,ELECTRONIC COMPONENT) is an item which can insert or remove an electronic component package such as MICROCIRCUIT; RESISTOR, NETWORK (as modified); and the like from its mounting position or socket. Excludes INSERTER AND REMOVER, ELECTRICAL CONTACT; REMOVER, ELECTRICAL CONTACT; EXTRACTOR, ELECTRICAL CARD; EXTRACTOR, ELECTRONIC CRYSTAL UNIT; EXTRACTOR, ELECTRON TUBE.
What is an Impact Type Bit Set And Handle Screwdriver? 14 Items: An Impact Type Bit Set And Handle Screwdriver (SCREWDRIVER,BIT SET AND HANDLE,IMPACT TYPE) is an item consisting of a set of screwdriver bits and a impact driver to accommodate the bits of various types and characteristics. It is designed to transmit a strong rotating movement by the impact of a hammer blowed on the impact driver. It is used to loosen rusted or seized screws. Excludes SCREWDRIVER, BIT SET AND HANDLE.
What is a Hand Vise Jaw? 19 Items: A Hand Vise Jaw (JAW,VISE,HAND) is an item consisting of two opposing parts of a VISE, HAND. The item is moveable and able to open and close. It can hold, grasp or clamp work.
What is a Screwdriver Handle? 28 Items: A Screwdriver Handle (HANDLE,SCREWDRIVER) is an item used to accommodate various types of BIT, SCREWDRIVER. It is designed to rotate a bit that is used for installing or removing screws.
What is a Wire Twister Pliers? 25 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 284 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is a Mechanical Puller Body? 45 Items: A Mechanical Puller Body (BODY,PULLER,MECHANICAL) is an item designed to support and enclose the internal parts of a PULLER,MECHANICAL.
What is a Flat Tip And Cross Tip Screwdriver Set? 39 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is a Socket Wrench Screwdriver Attachment Set? 22 Items: A Socket Wrench Screwdriver Attachment Set (SCREWDRIVER ATTACHMENT SET,SOCKET WRENCH) is a set of screwdriver attachment, socket wrench of different sizes. Items consist of a female square drive on one end to attach to a handle, socket wrench and various screwdriver tip configurations on the opposite end. Excludes SCREWDRIVER ATTACHMENT,SOCKET WRENCH
What is an Oil Filter Wrench? 44 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 430 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Communications Equipment Spring Adjuster? 13 Items: A Communications Equipment Spring Adjuster (ADJUSTER,SPRING,COMMUNICATIONS EQUIPMENT) is a single or double end tool, equipped with slot(s) of various dimensions or with cylindrical rod(s), used for adjusting the springs or spring tensioned parts of electronic equipment.
What is a Rotating Members Aligning Tool? 32 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
What is a Final Drive Assembly Alignment Pin? 41 Items: A Final Drive Assembly Alignment Pin (ALIGNMENT PIN,FINAL DRIVE ASSEMBLY) is a special designed pin used in the assembling of the final drive.
Arm,Handling Tool 77 Items
What is a Splicing Sleeve Compressing Tool? 23 Items: A Splicing Sleeve Compressing Tool (COMPRESSING TOOL,SPLICING SLEEVE) is a hand tool having hinged leverage handles similar to a CUTTER, BOLT or pliers, designed to compress a splicing sleeve when joining the ends of two conductors, or when forming an eye splice in the end of a wire rope. Excludes CRIMPING TOOL, TERMINAL, HAND.
What is a Hand Screw Jack Extension? 14 Items: A Hand Screw Jack Extension (EXTENSION,HAND SCREW JACK) is a length of externally threaded rigid shafting which is the adjustable section of a JACK, SCREW, HAND.
What is a Mechanical Puller Gear Adapter? 21 Items: A Mechanical Puller Gear Adapter (GEAR ADAPTER,PULLER,MECHANICAL) is an adapter that adapts a PULLER,MECHANICAL, to pull a certain gear.
Handle,Hydraulic Jack 18 Items
What is a Female Electrical Contact Resizing Tool? 11 Items: A Female Electrical Contact Resizing Tool (RESIZING TOOL,FEMALE ELECTRICAL CONTACT) is a tool designed to shape to a specific size, female contacts such as those used on electrical connectors, tube sockets, crystal sockets, and pin jacks.
What is a Screwdriver And Socket Wrench Combination? 13 Items: A Screwdriver And Socket Wrench Combination is a hand-tool formed into an integral unit with a socket wrench at one end and a screwdriver bit at the other end. See also SCREWDRIVER AND WRENCH ASSEMBLY.
What is a Hand Hose Fitting Swaging Tool Kit? 11 Items: A Hand Hose Fitting Swaging Tool Kit (SWAGING TOOL KIT,HOSE FITTING,HAND) is a device, hydraulically actuated by hand or power operated pump, consisting of face plate, adapter plate, finger cages, fingers, ram, bushing, and expanding mandrels combined on a single base in various functional arrangements. It is used for swaging the outside diameter of hose assembly fittings, expanding the inside diameter of hose assemblies, and securing the fabrication of hose assemblies. Included are a hand or power operated pump, lubricant, cases, and trays.
What is a Catch Lever Tool? 12 Items: A Catch Lever Tool (LEVER TOOL,CATCH) is a specially designed hand tool which engages the opening and closing lever of a CATCH (as modified) for ease of operation. It is constructed of thin rigid material, usually flat, and one end has an engaging tongue.
What is a Manual Impact Wrench? 11 Items: A Manual Impact Wrench (WRENCH,IMPACT,MANUAL) is a manually operated handheld tool consisting of spring-loaded handle and a power-impact head which delivers a torsional impact from either continuous movement of the handle in one direction, or by a reciprocating action. It is used in tightening and loosening fasteners, such as bolts, nuts, and the like. The item may include sockets, extensions and offset fittings, nut runners, and the like.
What is a Drift? 63 Items: A Drift is an item consisting of a tubular body fitted with replaceable tips. It is designed to insert or remove mechanical components where space is restricted.
What is a Nutdriver? 46 Items: A Nutdriver is a non-powered hand tool with a screwdriver style handle, shaft and formed female hex or square socket at driving end.
What is a Locking Device Removal Tool? 12 Items: A Locking Device Removal Tool (REMOVAL TOOL,LOCKING DEVICE) is a hand tool designed to facilitate the removal of a WASHER, KEY and a LOCKING PLATE, NUT AND BOLT.
What is a Hydraulic Fitting Crimping Tool Head? 26 Items: A Hydraulic Fitting Crimping Tool Head (HEAD,CRIMPING TOOL,HYDRAULIC FITTING) is a component of a crimping tool used to compress fittings on fluid tubes. It consists of a U-shape item, in which, are mounted different sizes of DIE, CRIMPING TOOL for tubes of various diameters.
What is a Torque Screwdriver? 11 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.
What is a Special Purpose Combination Wrench? 13 Items: A Special Purpose Combination Wrench (WRENCH,COMBINATION,SPECIAL PURPOSE) is a tool having a combination of ends and facets. The ends may have open end, box or spanner characteristics. The sides may have features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s). Designed to fit specific items, not sized as standard or metric.
What is a Screwdriver Bit Holder? 56 Items: A Screwdriver Bit Holder (HOLDER,SCREWDRIVER BIT) is an attachment with a socket end for accepting male hexagon shank insert bits and a drive end for adapting to a portable power or hand tool.
What is a Telescoping Pole? 16 Items: A Telescoping Pole (POLE,TELESCOPING) is an item which is designed to be extended or compressed by the sliding of overlapping sections. This item may or may not be able to accommodate an extension.

Stock Items From Supply Class 5120 Page 11 of 110

5120-14-417-7366
Driftpin

144177366
AXE060002501E1: RNCC: 3 | RNVC: 2
AXE060002501E1: RNCC: 5 | RNVC: 2

22 Jul 1987

5120-14-552-0167
Hand Hammer

145520167
868D.40BOR: RNCC: 3 | RNVC: 2
868D.40BOR: RNCC: 5 | RNVC: 2

20 Nov 2006

5120-14-528-8203
Hand Hammer

145288203
0400320301: RNCC: 3 | RNVC: 2
SYQ0825: RNCC: 5 | RNVC: 2

19 Feb 2002

5120-14-542-4920
Screwdriver Bit Set

145424920
7924045: RNCC: 3 | RNVC: 2
A 5270: RNCC: 3 | RNVC: 2
A 5270: RNCC: 5 | RNVC: 9
VX060062: RNCC: 6 | RNVC: 9

21 Jul 2004

5120-14-447-3213
Hand Hammer

144473213
310-24: RNCC: 3 | RNVC: 2
3272670407886: RNCC: 5 | RNVC: 2

15 May 1991

5120-14-201-6844
Hand Hammer

142016844
M0B111-2000EC: RNCC: 3 | RNVC: 2

1 Jan 1962

5120-14-322-7739
Socket Wrench

143227739
91-28: RNCC: 3 | RNVC: 2
85-641-1080: RNCC: 6 | RNVC: 9

1 Jan 1975

5120-14-300-8614
Box Wrench

143008614
NO PRIMARY REF14-300-8614: RNCC: 3 | RNVC: 2
C505-04: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-436-4548
Seal Inserter

144364548
851-290-018-0: RNCC: 3 | RNVC: 2

3 Jan 1990

5120-14-204-8895
Friction Igniter

142048895
5460: RNCC: 3 | RNVC: 2
130508: RNCC: 5 | RNVC: 2
GUI5460: RNCC: 5 | RNVC: 9
C0P5699: RNCC: 5 | RNVC: 9
197B: RNCC: 5 | RNVC: 9

1 Jan 1963

5120-14-545-4945
Mechanical Puller

145454945
8818268000: RNCC: 3 | RNVC: 2

14 Apr 2005

5120-14-448-0009
Mechanical Puller

144480009
299542P: RNCC: 3 | RNVC: 2

12 Jun 1991

5120-14-396-9296
Mechanical Puller

143969296
VFA831-7: RNCC: 3 | RNVC: 2

27 Nov 1984

5120-14-432-7059
Seal Inserter

144327059
OUT11811-2: RNCC: 3 | RNVC: 2
0UT11811-2: RNCC: 5 | RNVC: 2

21 Jun 1989

5120-14-489-9792
Ratchet Wrench

144899792
OA1220: RNCC: 3 | RNVC: 2

3 Sep 1997

5120-14-443-2222
Crimping Tool Die

144432222
58246-1: RNCC: 3 | RNVC: 2
0-0058246-1: RNCC: 5 | RNVC: 2

12 Nov 1990

5120-14-249-9374
Socket Wrench

142499374
319698B: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-471-4658
Socket Wrench

144714658
06 198: RNCC: 3 | RNVC: 2

30 Aug 1994

5120-14-213-5204
Mechanical Puller

142135204
50746: RNCC: 3 | RNVC: 2

1 Jan 1964

5120-14-527-7180
Seal Inserter

145277180
888-495-200-1: RNCC: 3 | RNVC: 2

14 Nov 2001

5120-14-321-4712
Mechanical Puller

143214712
20883A2MN90: RNCC: 3 | RNVC: 2
20883A2MN90: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-348-5836
Fuse Puller

143485836
A97060: RNCC: 3 | RNVC: 2
PRE10: RNCC: 5 | RNVC: 2

19 Apr 1978

5120-14-395-7390
Mechanical Puller

143957390
46AM062: RNCC: 3 | RNVC: 2

30 Oct 1984

5120-14-397-8074
Socket Wrench

143978074
F52188: RNCC: 3 | RNVC: 2

31 Jan 1985

5120-14-437-5618
Ratchet Wrench

144375618
68B.6X7: RNCC: 3 | RNVC: 2
1091084M00: RNCC: 5 | RNVC: 2
3148511162200: RNCC: 5 | RNVC: 2
162-2869: RNCC: 5 | RNVC: 2
0116220: RNCC: 5 | RNVC: 9
FACOM68B.6X7: RNCC: 5 | RNVC: 9
AA015916: RNCC: 6 | RNVC: 9

7 Feb 1990

5120-14-483-8622
Seal Inserter

144838622
0-701829-5-2: RNCC: 3 | RNVC: 2

5 Oct 1996

5120-14-476-9419
Seal Inserter

144769419
5001007451: RNCC: 3 | RNVC: 2

12 Jul 1995

5120-14-528-2389
Hand Hydraulic Jack

145282389
98250041656: RNCC: 3 | RNVC: 2

15 Jan 2002

5120-14-305-3689
Socket Wrench

143053689
121037: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-303-8563
Mechanical Puller

143038563
33153: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-504-8367
Socket Wrench

145048367
77A.PL2D: RNCC: 3 | RNVC: 2
3148511214367: RNCC: 5 | RNVC: 2

4 Mar 1998

5120-14-400-6420
Hand Hammer

144006420
204-22ENX: RNCC: 3 | RNVC: 2

8 May 1985

5120-14-461-6509
Pry Bar

144616509
PL1DA002OR901011A: RNCC: 3 | RNVC: 2

19 Mar 1993

5120-14-427-8310
Mechanical Puller

144278310
U.53K4: RNCC: 3 | RNVC: 2
3148510703671: RNCC: 5 | RNVC: 2
U53K4: RNCC: 5 | RNVC: 2
0070367: RNCC: 5 | RNVC: 9

16 Nov 1988

5120-14-340-8976
Box Wrench

143408976
9970-115-422: RNCC: 3 | RNVC: 2

14 Feb 1977

5120-14-437-5594
Mechanical Puller

144375594
39469404: RNCC: 3 | RNVC: 2

7 Feb 1990

5120-14-522-7201
Seal Inserter

145227201
IND80141: RNCC: 3 | RNVC: 2

15 Nov 2000

5120-14-352-5446
Box Wrench

143525446
0M591: RNCC: 3 | RNVC: 2
0M591: RNCC: 5 | RNVC: 2

16 Oct 1978

5120-14-488-8663
Plastic Mallet

144888663
207A.60CC: RNCC: 3 | RNVC: 2
3148511474662: RNCC: 5 | RNVC: 2
0535560: RNCC: 5 | RNVC: 9

10 Jun 1997

5120-14-237-9556
Drill Guide

142379556
0210960: RNCC: 3 | RNVC: 2
885.G9: RNCC: 5 | RNVC: 2
885G9: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-373-4924
Mechanical Puller

143734924
29195: RNCC: 3 | RNVC: 2

21 Oct 1981

5120-14-408-9638
Mechanical Puller

144089638
OUT50104: RNCC: 3 | RNVC: 2
0UT50104: RNCC: 5 | RNVC: 2

9 Apr 1986

5120-14-524-4188
Mechanical Puller

145244188
6404POC: RNCC: 3 | RNVC: 2

16 Mar 2001

5120-14-530-6421
Seal Inserter

145306421
D47730R5: RNCC: 3 | RNVC: 2

1 Jul 2002

5120-14-234-3453
Mechanical Puller

142343453
M02015: RNCC: 3 | RNVC: 2
0000330472: RNCC: 5 | RNVC: 2
0000330472: RNCC: 5 | RNVC: 9
330472: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-338-1739
Mechanical Puller

143381739
2460MN132: RNCC: 3 | RNVC: 2
2460MN132: RNCC: 5 | RNVC: 9

6 Nov 1976

5120-14-304-4394
Mechanical Puller

143044394
8811053000: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-238-7263
Mechanical Puller

142387263
42541: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-323-1992
Drive Pin Punch

143231992
1471: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-537-4758
Mechanical Puller

145374758
6501DMR118: RNCC: 3 | RNVC: 2

3 Nov 2003

5120-14-530-2046
Plier Wrench

145302046
T5.M: RNCC: 3 | RNVC: 2

22 May 2002

5120-14-270-9320
Socket Wrench

142709320
15781: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-423-2900
Machinist's Vise

144232900
61010: RNCC: 3 | RNVC: 2
91616727: RNCC: 5 | RNVC: 2
SAM61010: RNCC: 5 | RNVC: 9

14 Apr 1988

5120-14-363-8792
Mechanical Puller

143638792
1818T: RNCC: 3 | RNVC: 2

7 Aug 1980

5120-14-283-8992
Socket Wrench

142838992
D1010-1154: RNCC: 3 | RNVC: 2
AT81-056: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-398-3085
Drive Pin Punch

143983085
14000706-3: RNCC: 3 | RNVC: 2

31 Jan 1985

5120-14-551-4411
Ratchet Wrench

145514411
68TX.6X8: RNCC: 3 | RNVC: 2

21 Sep 2006

5120-14-415-8979
Hand Screw Jack

144158979
4826: RNCC: 3 | RNVC: 2

26 May 1987

5120-14-468-9711
Hand Shovel

144689711
117072: RNCC: 3 | RNVC: 2

30 Mar 1994

5120-14-405-3032
Hand Hammer

144053032
54189226: RNCC: 3 | RNVC: 2

27 Nov 1985

5120-14-449-8741
Socket Wrench

144498741
60710: RNCC: 3 | RNVC: 2
91705846: RNCC: 5 | RNVC: 2

11 Sep 1991

5120-14-540-8522
Digging Bar

145408522
0152200601: RNCC: 3 | RNVC: 2
3303800152069: RNCC: 5 | RNVC: 2

23 Apr 2004

5120-14-467-0769
Stake Puller Kit

144670769
120947: RNCC: 3 | RNVC: 2

16 Dec 1993

5120-14-461-0109
Mechanical Puller

144610109
U.53S2A: RNCC: 3 | RNVC: 2
3148510703893: RNCC: 5 | RNVC: 2
U53S2A: RNCC: 5 | RNVC: 2
91739702: RNCC: 5 | RNVC: 2
0070389: RNCC: 5 | RNVC: 9

17 Feb 1993

5120-14-414-2778
Socket Wrench

144142778
BB. 8P: RNCC: 3 | RNVC: 9

28 Jan 1987

5120-14-231-6216
Socket Wrench

142316216
17X21C12: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-317-1844
Socket Wrench

143171844
1718: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-461-6510
Pry Bar

144616510
PL1DA002OR901017A: RNCC: 3 | RNVC: 2

19 Mar 1993

5120-14-434-6479
Hand Hydraulic Jack

144346479
JHL-1,5: RNCC: 3 | RNVC: 9

27 Sep 1989

5120-14-232-7991
Socket Wrench

142327991
15137T9: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-382-3300
Hand Scissors Jack

143823300
7701348042: RNCC: 3 | RNVC: 2
7700581277: RNCC: 5 | RNVC: 2
7700612615: RNCC: 5 | RNVC: 2

17 Feb 1983

5120-14-427-0746
Hand Hammer

144270746
200A.32: RNCC: 3 | RNVC: 2
200A32: RNCC: 5 | RNVC: 2
3148511462805: RNCC: 5 | RNVC: 2
2695 502 060: RNCC: 5 | RNVC: 2
0113278A00: RNCC: 5 | RNVC: 2
91626650: RNCC: 5 | RNVC: 2
0146280: RNCC: 5 | RNVC: 9

6 Oct 1988

5120-14-483-0712
Pipe Wrench

144830712
137A.2'1/2: RNCC: 3 | RNVC: 2
3148511373699: RNCC: 5 | RNVC: 2
137369: RNCC: 5 | RNVC: 2

8 Aug 1996

5120-14-438-5411
Socket Wrench

144385411
9689160609: RNCC: 3 | RNVC: 2

21 Mar 1990

5120-14-428-9234
Gas Torch

144289234
18939: RNCC: 3 | RNVC: 2
SOUDOGAZ-T206: RNCC: 5 | RNVC: 2
SOUDOGAZ-T206: RNCC: 5 | RNVC: 2

22 Dec 1988

5120-14-372-6045
Open End Box Wrench

143726045
1892-35: RNCC: 3 | RNVC: 2

21 Sep 1981

5120-14-483-8692
Seal Remover

144838692
0-702408-6: RNCC: 3 | RNVC: 2

5 Oct 1996

5120-14-530-8540
Ratchet Wrench

145308540
116225: RNCC: 3 | RNVC: 2
68B.6X7H: RNCC: 5 | RNVC: 2
3148511162255: RNCC: 5 | RNVC: 2

9 Jul 2002

5120-14-389-6111
Socket Wrench

143896111
NO PRIMARY REF14-389-6111: RNCC: 3 | RNVC: 2
9140740: RNCC: 5 | RNVC: 9

20 Dec 1983

5120-14-489-4906
Drill Guide

144894906
CESLASMCRH011: RNCC: 3 | RNVC: 2

23 Jul 1997

5120-14-329-6304
Mechanical Puller

143296304
MS1396: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-275-8906
Box Wrench

142758906
50.58: RNCC: 3 | RNVC: 2
108-58: RNCC: 3 | RNVC: 2
119-58: RNCC: 3 | RNVC: 9
3272670305946: RNCC: 5 | RNVC: 2
50-58: RNCC: 5 | RNVC: 2
3148511068403: RNCC: 5 | RNVC: 2
DEM119-58: RNCC: 5 | RNVC: 9
0106840: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-521-2252
Seal Inserter

145212252
010-444-00826-104: RNCC: 3 | RNVC: 2
010-444-00826-104: RNCC: 3 | RNVC: 2
010-444-00826-104: RNCC: 5 | RNVC: 2
010-444-00826-104: RNCC: 5 | RNVC: 2

12 Jul 2000

5120-14-481-3223
Drill Guide

144813223
1407-090B303: RNCC: 3 | RNVC: 2
1407-090B303: RNCC: 5 | RNVC: 2

1 May 1996

5120-14-417-3093
Ratchet Screwdriver

144173093
RL5P: RNCC: 3 | RNVC: 2
67605: RNCC: 3 | RNVC: 2

1 Jul 1987

5120-14-527-9155
Seal Inserter

145279155
888-482-800-1: RNCC: 3 | RNVC: 2

28 Nov 2001

5120-14-374-6866
Mechanical Puller

143746866
A33589K: RNCC: 3 | RNVC: 2

30 Jan 1982

5120-14-439-6212
Mechanical Puller

144396212
6801G31-1457-20: RNCC: 3 | RNVC: 2

16 May 1990

5120-14-379-8426
Mechanical Puller

143798426
703A93-0300-00: RNCC: 3 | RNVC: 2
703A 93 0300 00: RNCC: 5 | RNVC: 2

20 Oct 1982

5120-14-480-2600
Aligning Punch

144802600
888-372-700-2: RNCC: 3 | RNVC: 2

28 Feb 1996

5120-14-207-5536
Socket Wrench Set

142075536
NO PRIMARY REF14-207-5536: RNCC: 3 | RNVC: 2
W34-11BM: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-427-6184
Open End Box Wrench

144276184
104-H-11X13: RNCC: 3 | RNVC: 2
43.11X13: RNCC: 3 | RNVC: 2
104H11X13: RNCC: 3 | RNVC: 2
3148511021408: RNCC: 5 | RNVC: 2
3272670281912: RNCC: 5 | RNVC: 2
43-11X13: RNCC: 5 | RNVC: 2
0102140: RNCC: 5 | RNVC: 9

26 Oct 1988

5120-14-501-7812
Drive Pin Punch

145017812
NO PRIMARY REF14-501-7812: RNCC: 3 | RNVC: 2
TCFX1EE: RNCC: 5 | RNVC: 9
1J 004 01 02920: RNCC: 5 | RNVC: 9
241 P 03572 150: RNCC: 5 | RNVC: 9
F300 0T 000 1119: RNCC: 6 | RNVC: 9

10 Nov 1997

5120-14-421-7576
Driftpin

144217576
39529637: RNCC: 3 | RNVC: 2
39529637: RNCC: 5 | RNVC: 9

27 Jan 1988

5120-14-421-3277
Mechanical Puller

144213277
523041: RNCC: 3 | RNVC: 2

14 Jan 1988

5120-14-504-0287
Plier Wrench

145040287
518.2: RNCC: 3 | RNVC: 2
0182130: RNCC: 5 | RNVC: 2
3148511821305: RNCC: 5 | RNVC: 2

4 Feb 1998

5120-14-516-2649
Mechanical Puller

145162649
TA5020G001: RNCC: 3 | RNVC: 2

15 Sep 1999

5120-14-486-5623
Rivet Bucking Bar

144865623
RT13666: RNCC: 3 | RNVC: 2

24 Mar 1997

5120-14-480-2060
Hand Screw Jack

144802060
50152000: RNCC: 3 | RNVC: 2

28 Feb 1996

5120-14-525-0693
Open End Box Wrench

145250693
70A.JE7T: RNCC: 3 | RNVC: 2

16 May 2001

5120-14-500-9589
Hand Shovel

145009589
C69402200000: RNCC: 3 | RNVC: 2
F300 0T 024 9801: RNCC: 6 | RNVC: 9

29 Oct 1997

5120-14-452-2548
Box Wrench

144522548
62-11-32X13-32: RNCC: 3 | RNVC: 2
62.11/32X13/32: RNCC: 5 | RNVC: 2

8 Jan 1992

5120-14-412-5909
Socket Wrench

144125909
853-100-185-0: RNCC: 3 | RNVC: 2

15 Oct 1986

5120-14-478-2775
Mechanical Puller

144782775
D05-0026: RNCC: 3 | RNVC: 2

18 Oct 1995

5120-14-467-0866
Plier Clamp

144670866
PINCE/ETAUML280X85X68: RNCC: 3 | RNVC: 2

16 Dec 1993

5120-14-378-2912
Hand Hammer

143782912
154672: RNCC: 3 | RNVC: 2
SYB0343: RNCC: 5 | RNVC: 2
79540: RNCC: 5 | RNVC: 9

20 Jul 1982

5120-14-343-6375
Mechanical Puller

143436375
330A93-2014-00: RNCC: 3 | RNVC: 2

16 Jun 1977

5120-14-439-6206
Seal Inserter

144396206
6801E33-3130-21: RNCC: 3 | RNVC: 2

16 May 1990

5120-14-430-1025
Wrecking Bar

144301025
268.3: RNCC: 3 | RNVC: 2
268-3: RNCC: 5 | RNVC: 2
3148511621707: RNCC: 5 | RNVC: 2
2695 033 03: RNCC: 5 | RNVC: 2
0162170: RNCC: 5 | RNVC: 9

1 Mar 1989

5120-14-433-5491
Open End Box Wrench

144335491
M4Z6021940320: RNCC: 3 | RNVC: 2

2 Aug 1989

5120-14-346-6749
Jaw Cable Grip

143466749
MD51033: RNCC: 3 | RNVC: 2
MD51033: RNCC: 5 | RNVC: 9

12 Dec 1977

5120-14-273-7088
Hand Hammer Head

142737088
211-30: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-423-9251
Rack Bar Jack

144239251
F117DMCL10T: RNCC: 3 | RNVC: 2

5 May 1988

5120-14-513-9102
Ratchet Wrench

145139102
511810017: RNCC: 3 | RNVC: 2

14 Apr 1999

5120-14-265-3217
Box Wrench

142653217
0334-78: RNCC: 3 | RNVC: 2
RA334: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-273-7010
Hand Hammer Head

142737010
206-42: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-242-8340
Lamp Extractor

142428340
6210AATIRELAMPED12T: RNCC: 2 | RNVC: 2
TL: RNCC: 3 | RNVC: 2
6210AATIRELAMPED12T: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-445-2527
Oil Filter Wrench

144452527
M0T445: RNCC: 3 | RNVC: 2

6 Feb 1991

5120-14-265-0884
Mechanical Puller

142650884
330A93-3074-00: RNCC: 3 | RNVC: 2
330A93-3074-0000: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-283-3903
Box Wrench

142833903
9970-115-196: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-281-7559
Mechanical Puller

142817559
A125806: RNCC: 3 | RNVC: 2
100137: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-449-4440
Open End Box Wrench

144494440
0531750: RNCC: 3 | RNVC: 2
70JN6: RNCC: 5 | RNVC: 2

19 Aug 1991

5120-14-439-0292
Mechanical Puller

144390292
703A93-0028-00: RNCC: 3 | RNVC: 2
85-694-1512: RNCC: 6 | RNVC: 9

19 Apr 1990

5120-14-210-9835
Socket Wrench

142109835
3107232: RNCC: 3 | RNVC: 2
80-32: RNCC: 3 | RNVC: 2
122-32: RNCC: 3 | RNVC: 9
DEM122-32: RNCC: 5 | RNVC: 9
VIR3107232: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-438-9626
Socket Wrench

144389626
330A98-2141-20: RNCC: 3 | RNVC: 2

11 Apr 1990

5120-14-201-6825
Hand Tube Bender

142016825
NO PRIMARY REF14-201-6825: RNCC: 3 | RNVC: 2
C510: RNCC: 5 | RNVC: 9

1 Jan 1962

5120-14-532-3872
Seal Inserter

145323872
MGF604-42: RNCC: 3 | RNVC: 2

30 Oct 2002

5120-14-429-1371
Open End Box Wrench

144291371
548386: RNCC: 3 | RNVC: 2

11 Jan 1989

5120-14-322-5414
Box Wrench

143225414
50.44: RNCC: 3 | RNVC: 2
3148511067000: RNCC: 5 | RNVC: 2
50-44: RNCC: 5 | RNVC: 2
0106700: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-422-1195
Ratchet Wrench

144221195
68B.22X24: RNCC: 3 | RNVC: 2
0714 23 29: RNCC: 5 | RNVC: 2
3148511162507: RNCC: 5 | RNVC: 2
68B-22X24: RNCC: 5 | RNVC: 2
68B22X24: RNCC: 5 | RNVC: 2
0116250: RNCC: 5 | RNVC: 9

24 Feb 1988

5120-14-384-3358
Ratchet Wrench

143843358
F726: RNCC: 3 | RNVC: 2
F8360: RNCC: 5 | RNVC: 2
F726: RNCC: 5 | RNVC: 2
F726B: RNCC: 5 | RNVC: 2
FH936A: RNCC: 5 | RNVC: 9
85-692-2085: RNCC: 6 | RNVC: 9

4 May 1983

5120-14-495-5764
Socket Wrench

144955764
G16520-04: RNCC: 3 | RNVC: 2
F300 0T 019 5012: RNCC: 6 | RNVC: 9

15 Oct 1997

5120-14-468-7873
Socket Wrench

144687873
90-SD-24: RNCC: 3 | RNVC: 2
90.SD24: RNCC: 3 | RNVC: 2
3272670336551: RNCC: 5 | RNVC: 2

22 Mar 1994

5120-14-465-6485
Mechanical Puller

144656485
851-500-195-0: RNCC: 3 | RNVC: 2

6 Oct 1993

5120-14-399-1925
Drive Pin Punch

143991925
248.5: RNCC: 3 | RNVC: 2
0714 64 08: RNCC: 5 | RNVC: 2
248.5: RNCC: 5 | RNVC: 2
248-5: RNCC: 5 | RNVC: 2
3148511593004: RNCC: 5 | RNVC: 2
701339: RNCC: 5 | RNVC: 2
0159300: RNCC: 5 | RNVC: 9

6 Mar 1985

5120-14-309-7629
Open End Box Wrench

143097629
RT11452: RNCC: 3 | RNVC: 2
K10731: RNCC: 5 | RNVC: 2

1 Jan 1974

5120-14-456-7157
Hand Rivet Set

144567157
853-600-364-0: RNCC: 3 | RNVC: 2

24 Jul 1992

5120-14-511-3832
Mechanical Puller

145113832
MGB027-22: RNCC: 3 | RNVC: 2
MGB027-22: RNCC: 5 | RNVC: 2

16 Dec 1998

5120-14-382-8822
Open End Box Wrench

143828822
43.10X11: RNCC: 3 | RNVC: 2
3148511021309: RNCC: 5 | RNVC: 2
43-10X11: RNCC: 5 | RNVC: 2
0102130: RNCC: 5 | RNVC: 9

17 Feb 1983

5120-14-528-8021
Screw Extractor Set

145288021
285.8/285.11/285.14: RNCC: 3 | RNVC: 2
SYQ0812: RNCC: 5 | RNVC: 2
0165080/0165140/0165150: RNCC: 5 | RNVC: 9

15 Feb 2002

5120-14-274-8484
Socket Wrench

142748484
NO PRIMARY REF14-274-8484: RNCC: 3 | RNVC: 2
154-10: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-441-2353
Mechanical Puller

144412353
6901E31-9831-21: RNCC: 3 | RNVC: 2

22 Aug 1990

5120-14-517-3801
Seal Inserter

145173801
0XB485-300-689-803: RNCC: 3 | RNVC: 2

8 Dec 1999

5120-14-413-2682
Mechanical Puller

144132682
NO PRIMARY REF14-413-2682: RNCC: 3 | RNVC: 2
XMT580753: RNCC: 5 | RNVC: 2
926/78: RNCC: 5 | RNVC: 9

26 Nov 1986

5120-14-368-5815
Mechanical Puller

143685815
14-18-984-0P: RNCC: 3 | RNVC: 2
14189840P: RNCC: 3 | RNVC: 2

20 Feb 1981

5120-14-201-6846
Hand Hammer

142016846
3830-5EMMANCHE: RNCC: 3 | RNVC: 2
0005500301: RNCC: 3 | RNVC: 2
M0B5-5000EC: RNCC: 3 | RNVC: 2
4066M5000PANNEENL0NG: RNCC: 5 | RNVC: 9

1 Jan 1962

5120-14-495-9114
Socket Wrench

144959114
F00152815: RNCC: 3 | RNVC: 2
F00152815: RNCC: 5 | RNVC: 9

15 Oct 1997

5120-14-528-0681
Seal Inserter

145280681
888-477-900-2: RNCC: 3 | RNVC: 2
888-477-900-1: RNCC: 5 | RNVC: 2

12 Dec 2001

5120-14-441-2064
Mechanical Puller

144412064
332A93-3113-10: RNCC: 3 | RNVC: 2

22 Aug 1990

5120-14-501-4943
Ratchet Wrench

145014943
NO PRIMARY REF14-501-4943: RNCC: 3 | RNVC: 2
NNP5120848465549: RNCC: 5 | RNVC: 9

29 Oct 1997

5120-14-334-8411
Socket Wrench

143348411
90-15: RNCC: 3 | RNVC: 2
3272670264083: RNCC: 5 | RNVC: 2

2 Jun 1976

5120-14-392-0899
Ratchet Wheel

143920899
853-100-156-0: RNCC: 3 | RNVC: 2

21 Mar 1984

5120-14-437-4048
Aligning Punch

144374048
NO PRIMARY REF14-437-4048: RNCC: 3 | RNVC: 2
758-010-16: RNCC: 5 | RNVC: 9

31 Jan 1990

5120-14-326-1839
Box Wrench

143261839
E29-071-12INCLINEE: RNCC: 2 | RNVC: 2
99250120121: RNCC: 3 | RNVC: 2
99-250-12-012-1: RNCC: 5 | RNVC: 2

2 Jul 1975

5120-14-379-8416
Seal Inserter

143798416
332A93-3600-20: RNCC: 3 | RNVC: 2
332A 93 3600-20: RNCC: 5 | RNVC: 2

20 Oct 1982

5120-14-422-4754
Mechanical Puller

144224754
121E93-190-30-0: RNCC: 3 | RNVC: 2

3 Mar 1988

5120-14-428-0627
Mechanical Puller

144280627
458-3: RNCC: 3 | RNVC: 2

26 Nov 1988

5120-14-365-7812
Drain Plug Wrench

143657812
P.27B: RNCC: 3 | RNVC: 2
3148510476407: RNCC: 5 | RNVC: 2
P27B: RNCC: 5 | RNVC: 2
0047640: RNCC: 5 | RNVC: 9

8 Oct 1980

5120-14-204-1003
Mechanical Puller

142041003
3130S98-04-100: RNCC: 3 | RNVC: 2

1 Jan 1963

5120-14-465-6569
Box Wrench

144656569
100-407: RNCC: 3 | RNVC: 9
100-407: RNCC: 5 | RNVC: 9
85-694-1841: RNCC: 6 | RNVC: 9

6 Oct 1993

5120-14-396-9148
Box Wrench

143969148
CMT30E9005PL3REP4: RNCC: 3 | RNVC: 2

27 Nov 1984

5120-14-382-6390
Hand Screw Jack

143826390
96069408: RNCC: 3 | RNVC: 2
96069408: RNCC: 5 | RNVC: 9

17 Feb 1983

5120-14-513-2847
Catch Lever Tool

145132847
NO PRIMARY REF14-513-2847: RNCC: 3 | RNVC: 2
NNP 4820864526893: RNCC: 5 | RNVC: 9

10 Mar 1999

5120-14-481-6050
Seal Inserter

144816050
NO PRIMARY REF14-481-6050: RNCC: 3 | RNVC: 2
816054: RNCC: 5 | RNVC: 9

16 May 1996

5120-14-540-8479
Hand Tube Bender

145408479
2501 00: RNCC: 3 | RNVC: 2

23 Apr 2004

5120-14-423-4292
Socket Wrench

144234292
40104: RNCC: 3 | RNVC: 2

19 Apr 1988

5120-14-246-9969
Box Wrench

142469969
62-32X35: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-218-6760
Socket Wrench

142186760
17-9-145: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-442-6665
Drill Guide

144426665
NO PRIMARY REF14-442-6665: RNCC: 3 | RNVC: 2
0U138567: RNCC: 5 | RNVC: 9
OU138567: RNCC: 5 | RNVC: 9

24 Oct 1990

5120-14-316-5583
Mechanical Puller

143165583
321A97-3304-00: RNCC: 3 | RNVC: 2
08-451: RNCC: 5 | RNVC: 2
321-97-3304-00: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-391-3115
Plastic Mallet

143913115
320-28D: RNCC: 3 | RNVC: 2
3272670255371: RNCC: 5 | RNVC: 2
320-28: RNCC: 5 | RNVC: 9

1 Mar 1984

5120-14-488-5541
Box Wrench

144885541
55.7X8: RNCC: 3 | RNVC: 2
0110810: RNCC: 5 | RNVC: 2
3148511108109: RNCC: 5 | RNVC: 2
55-7X8: RNCC: 5 | RNVC: 2

21 May 1997

5120-14-413-3193
Box Wrench

144133193
50.102: RNCC: 3 | RNVC: 2
3148511072806: RNCC: 5 | RNVC: 2
50-102: RNCC: 5 | RNVC: 2
0107280: RNCC: 5 | RNVC: 9

26 Nov 1986

5120-14-476-3848
Mechanical Puller

144763848
853-203-213-0: RNCC: 3 | RNVC: 2

7 Jun 1995

5120-14-548-4372
Mechanical Puller

145484372
U.53KLO: RNCC: 3 | RNVC: 2

17 Jan 2006

5120-14-437-2561
Mechanical Puller

144372561
IND75101: RNCC: 3 | RNVC: 2

24 Jan 1990

5120-14-349-3834
Ratchet Wrench

143493834
9970-115-677: RNCC: 3 | RNVC: 2

22 May 1978

5120-14-529-8987
Piston Inserter

145298987
TO/A33000401: RNCC: 3 | RNVC: 2

17 Apr 2002

5120-14-329-6373
Mechanical Puller

143296373
MGM231-21: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-485-8831
Socket Wrench

144858831
K7739-12111-7/8X3/4WW: RNCC: 3 | RNVC: 2
12111-7/8X3/4WW: RNCC: 5 | RNVC: 2

19 Feb 1997

5120-14-311-1701
Socket Wrench

143111701
90-50: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-529-1008
Stud Remover

145291008
287B.9: RNCC: 3 | RNVC: 2
3148511656518: RNCC: 5 | RNVC: 2

11 Mar 2002

5120-14-363-8769
Socket Wrench

143638769
1469: RNCC: 3 | RNVC: 2

7 Aug 1980

5120-14-449-0082
Pipe Vise

144490082
OU427-TH: RNCC: 3 | RNVC: 2
96147906: RNCC: 5 | RNVC: 2

24 Jul 1991

5120-14-464-4886
Rivet Bucking Bar

144644886
851-910-020-0: RNCC: 3 | RNVC: 2

4 Aug 1993

5120-14-274-7885
Hand Hammer Head

142747885
138-6000: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-341-5359
Socket Wrench

143415359
R59209: RNCC: 3 | RNVC: 2

16 Mar 1977

5120-14-209-8299
Socket Wrench

142098299
3111261: RNCC: 3 | RNVC: 2
31223-30X32: RNCC: 5 | RNVC: 9
VIR3111261: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-532-2420
Drive Pin Punch

145322420
7C99A: RNCC: 3 | RNVC: 2

23 Oct 2002

5120-14-362-7542
Box Wrench

143627542
0M667: RNCC: 3 | RNVC: 2
0M667: RNCC: 5 | RNVC: 2

19 Mar 1980

5120-14-551-1719
Hand Beading Tool

145511719
347: RNCC: 3 | RNVC: 2
347: RNCC: 5 | RNVC: 2

31 Aug 2006

5120-14-364-8020
Claw Bar

143648020
212286: RNCC: 3 | RNVC: 2

2 Sep 1980

5120-14-311-1668
Socket Wrench

143111668
76.8: RNCC: 3 | RNVC: 2
89-8: RNCC: 3 | RNVC: 2
3148511208007: RNCC: 5 | RNVC: 2
76-8: RNCC: 5 | RNVC: 2
162-4332: RNCC: 5 | RNVC: 2
2695 612 68: RNCC: 5 | RNVC: 2
0120800: RNCC: 5 | RNVC: 9
FACOM76.8: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-514-3855
Open End Box Wrench

145143855
ENFD29468-17X19: RNCC: 3 | RNVC: 2

19 May 1999

5120-14-411-2116
Driftpin

144112116
121-504-10W26H3: RNCC: 3 | RNVC: 2
121-504-10-W26H3: RNCC: 5 | RNVC: 2
85-692-0020: RNCC: 6 | RNVC: 9

6 Aug 1986

5120-14-532-3870
Seal Inserter

145323870
MGF604-24: RNCC: 3 | RNVC: 2

30 Oct 2002

5120-14-236-2187
Hand Tube Bender

142362187
30U379: RNCC: 3 | RNVC: 2
0702-01-073: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-417-8382
Tack Claw

144178382
540577: RNCC: 3 | RNVC: 2

29 Jul 1987

5120-14-552-0092
Drive Pin Punch

145520092
249.G16: RNCC: 3 | RNVC: 2
3148511594612: RNCC: 3 | RNVC: 2
249.G16: RNCC: 5 | RNVC: 2

20 Nov 2006

5120-14-528-3489
Socket Wrench

145283489
C04/4801: RNCC: 3 | RNVC: 2

23 Jan 2002

5120-14-369-3278
Seal Inserter

143693278
366A93-3206-10: RNCC: 3 | RNVC: 2

7 Mar 1996

5120-14-362-7548
Box Wrench

143627548
35AM026: RNCC: 3 | RNVC: 2
85-691-3149: RNCC: 6 | RNVC: 9

19 Mar 1980

5120-14-475-9342
Crimping Tool Die

144759342
483349-1: RNCC: 3 | RNVC: 2
85-693-4202: RNCC: 6 | RNVC: 9

10 May 1995

5120-14-242-6026
Box Wrench

142426026
552-410MA111DET7: RNCC: 3 | RNVC: 2
552-426MA016DET7: RNCC: 5 | RNVC: 2
773-425-155DET7: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-280-4170
Mechanical Puller

142804170
A124164: RNCC: 3 | RNVC: 2
100088: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-380-4699
Mechanical Puller

143804699
525827: RNCC: 3 | RNVC: 2
00525827: RNCC: 5 | RNVC: 2

29 Nov 1982

5120-14-301-0978
Mechanical Puller

143010978
330A98-3432-00: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-322-5412
Box Wrench

143225412
50.36: RNCC: 3 | RNVC: 2
3148511066201: RNCC: 5 | RNVC: 2
50-36: RNCC: 5 | RNVC: 2
0106620: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-406-6127
Mechanical Puller

144066127
853-201-089-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-352-7969
Mechanical Puller

143527969
00143650: RNCC: 3 | RNVC: 2
VDP7414: RNCC: 5 | RNVC: 2

14 Nov 1978

5120-14-218-9638
Socket Wrench

142189638
80 5/8: RNCC: 3 | RNVC: 2
72-5/8: RNCC: 3 | RNVC: 2
72-5-8: RNCC: 5 | RNVC: 2
80 5-8: RNCC: 5 | RNVC: 2

1 Jan 1965

5120-14-443-9367
Box Wrench

144439367
GS102-04: RNCC: 3 | RNVC: 2

13 Dec 1990

5120-14-031-6320
Socket Wrench Set

140316320
R.410D: RNCC: 3 | RNVC: 2
3148515123900: RNCC: 5 | RNVC: 2
R410D: RNCC: 5 | RNVC: 2
162-9983: RNCC: 5 | RNVC: 2
0512390: RNCC: 5 | RNVC: 9
FACOMR.410D: RNCC: 5 | RNVC: 9

14 Jun 1980

5120-14-404-1181
Socket Wrench

144041181
1721Z: RNCC: 3 | RNVC: 2
C2M-99-12.13: RNCC: 3 | RNVC: 2

11 Sep 1985

5120-14-442-3656
Socket Wrench

144423656
X555547: RNCC: 3 | RNVC: 2
X555547-79022: RNCC: 5 | RNVC: 2

15 Oct 1990

5120-14-411-9120
Mechanical Puller

144119120
14189920B: RNCC: 3 | RNVC: 2

16 Sep 1986

5120-14-421-3391
Mechanical Puller

144213391
536885: RNCC: 3 | RNVC: 2

14 Jan 1988

5120-14-542-6855
Mechanical Puller

145426855
8049733D00: RNCC: 3 | RNVC: 2

28 Jul 2004

5120-14-417-1032
Mechanical Puller

144171032
537531: RNCC: 3 | RNVC: 2

1 Jul 1987

5120-14-410-4784
Mechanical Puller

144104784
8815346000: RNCC: 3 | RNVC: 2

2 Jul 1986

5120-14-369-7969
Driftpin

143697969
30AM005-010001: RNCC: 3 | RNVC: 2

17 Apr 1981

5120-14-432-1220
Box Wrench

144321220
853-190-025-0: RNCC: 3 | RNVC: 2

24 May 1989

5120-14-529-8982
Mechanical Puller

145298982
TO/A33000407: RNCC: 3 | RNVC: 2

17 Apr 2002

5120-14-530-8543
Nutdriver

145308543
119040: RNCC: 3 | RNVC: 2
74.5/16: RNCC: 3 | RNVC: 2
3148511190401: RNCC: 5 | RNVC: 2

9 Jul 2002

5120-14-357-9940
Box Wrench

143579940
MHC302-41: RNCC: 3 | RNVC: 2
MHC302-41: RNCC: 5 | RNVC: 2

20 Jul 1979

5120-14-260-3546
Drive Pin Punch

142603546
3130-95-33-035: RNCC: 3 | RNVC: 2
85-688-5096: RNCC: 6 | RNVC: 9

1 Jan 1970

5120-14-434-7748
Mechanical Puller

144347748
5953811: RNCC: 3 | RNVC: 2

4 Oct 1989

5120-14-358-4588
Drain Plug Wrench

143584588
0923-78: RNCC: 3 | RNVC: 9

13 Aug 1979

5120-14-539-3147
Seal Inserter

145393147
T651G3003121: RNCC: 3 | RNVC: 2

22 Dec 2003

5120-14-541-1850
Torque Screwdriver

145411850
0588179: RNCC: 3 | RNVC: 2

18 May 2004

5120-14-512-0625
Hand Scissors Jack

145120625
0050104: RNCC: 3 | RNVC: 2

3 Feb 1999

5120-14-434-3243
Seal Inserter

144343243
EMH139389A: RNCC: 3 | RNVC: 2
EMH139389A: RNCC: 5 | RNVC: 9

20 Sep 1989

5120-14-410-3436
Mechanical Puller

144103436
8813373000: RNCC: 3 | RNVC: 2

18 Jun 1986

5120-14-466-3767
Mechanical Puller

144663767
M47085: RNCC: 3 | RNVC: 2

3 Nov 1993

5120-14-457-3624
Seal Inserter

144573624
45215137: RNCC: 3 | RNVC: 2
45215137: RNCC: 5 | RNVC: 9

27 Aug 1992

5120-14-360-2778
Mechanical Puller

143602778
8811132000: RNCC: 3 | RNVC: 2

23 Nov 1979

5120-14-410-7993
Hammer Handle

144107993
C81: RNCC: 3 | RNVC: 2

9 Jul 1986

5120-14-411-9193
Driftpin

144119193
27980170: RNCC: 3 | RNVC: 2

16 Sep 1986

5120-14-362-4018
Mechanical Puller

143624018
099400: RNCC: 3 | RNVC: 2
099400T: RNCC: 5 | RNVC: 2

19 Mar 1980

5120-14-395-0552
Mechanical Puller

143950552
8812880000: RNCC: 3 | RNVC: 2

2 Oct 1984

5120-14-524-9502
Mechanical Puller

145249502
007742: RNCC: 3 | RNVC: 2
SYB2425: RNCC: 5 | RNVC: 2

4 May 2001

5120-14-461-3480
Aligning Punch

144613480
F46616: RNCC: 3 | RNVC: 2
F46616SA: RNCC: 5 | RNVC: 2

9 Mar 1993

5120-14-291-2376
Mechanical Puller

142912376
30444: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-543-6921
Mechanical Puller

145436921
6707643: RNCC: 3 | RNVC: 2

2 Dec 2004

5120-14-449-0135
Box Wrench

144490135
76057: RNCC: 3 | RNVC: 2
89280497: RNCC: 5 | RNVC: 2

24 Jul 1991

5120-14-317-4702
Mechanical Puller

143174702
U53E: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-425-9259
Seal Inserter

144259259
600118: RNCC: 3 | RNVC: 2

28 Jul 1988

5120-14-397-0833
Mechanical Puller

143970833
OU50431: RNCC: 3 | RNVC: 2

1 Dec 1984

5120-14-450-3353
Mechanical Puller

144503353
C46608-1: RNCC: 3 | RNVC: 2

25 Sep 1991

5120-14-454-4826
Mechanical Puller

144544826
2230MEPMONT82: RNCC: 3 | RNVC: 2

2 Apr 1992

5120-14-431-4226
Hand Tube Bender

144314226
2213: RNCC: 3 | RNVC: 2
H18: RNCC: 5 | RNVC: 2

19 Apr 1989

5120-14-456-8225
Drift Punch

144568225
45057971: RNCC: 3 | RNVC: 2
45057971: RNCC: 5 | RNVC: 9

24 Jul 1992

5120-14-522-2456
Socket Wrench Set

145222456
PX.R2: RNCC: 3 | RNVC: 2

11 Oct 2000

5120-14-269-0129
Socket Wrench

142690129
000DE0062REP2: RNCC: 3 | RNVC: 2
000DE062REP2: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-348-6219
Driftpin

143486219
4724: RNCC: 3 | RNVC: 2
MAS4724: RNCC: 3 | RNVC: 2

19 Apr 1978

5120-14-040-7919
Mechanical Puller

140407919
000341005P: RNCC: 3 | RNVC: 2
2112: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-522-8124
Mechanical Puller

145228124
21825603: RNCC: 3 | RNVC: 2

28 Nov 2000

5120-14-368-1540
Mechanical Puller

143681540
16380401: RNCC: 3 | RNVC: 2
16380401: RNCC: 5 | RNVC: 9

20 Feb 1981

5120-14-392-1216
Hot Line Stick

143921216
22082446: RNCC: 3 | RNVC: 2
22082446: RNCC: 5 | RNVC: 9

21 Mar 1984

5120-14-389-8338
Mechanical Puller

143898338
26545906600: RNCC: 3 | RNVC: 2
265459066: RNCC: 5 | RNVC: 2
265459066: RNCC: 5 | RNVC: 9

20 Dec 1983

5120-14-365-0201
Pipe Wrench

143650201
0106100: RNCC: 3 | RNVC: 2
VIR0106100: RNCC: 5 | RNVC: 9

2 Sep 1980

5120-14-503-0925
Wood Mallet

145030925
207A32NCB: RNCC: 3 | RNVC: 2

7 Jan 1998

5120-14-286-6582
Fuse Puller

142866582
MZ250: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-281-7624
Mechanical Puller

142817624
A124187: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-323-2002
Plastic Mallet

143232002
1175: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-454-9392
Claw Bar

144549392
268.4: RNCC: 3 | RNVC: 2
162180: RNCC: 5 | RNVC: 2
3148511621806: RNCC: 5 | RNVC: 2
0162180: RNCC: 5 | RNVC: 9

29 Apr 1992

5120-14-488-7518
Screw Extractor

144887518
459001: RNCC: 3 | RNVC: 9

2 Jun 1997

5120-14-331-6839
Socket Wrench

143316839
AMA3695: RNCC: 3 | RNVC: 2
3695: RNCC: 5 | RNVC: 2

2 Jul 1975

5120-14-371-6015
Lamp Cap Extractor

143716015
70394489: RNCC: 3 | RNVC: 2
70394489: RNCC: 5 | RNVC: 9

5 Aug 1981

5120-14-352-7152
Mechanical Puller

143527152
00131300: RNCC: 3 | RNVC: 2
VDP7419: RNCC: 5 | RNVC: 2

14 Nov 1978

5120-14-469-9045
Box Wrench

144699045
55.22VSE: RNCC: 3 | RNVC: 2
3148511123522: RNCC: 5 | RNVC: 2
0112352: RNCC: 5 | RNVC: 9

18 May 1994

5120-14-545-9152
Drive Pin Punch

145459152
210440: RNCC: 3 | RNVC: 2

27 May 2005

5120-14-459-1600
Gear Inserter

144591600
45056088: RNCC: 3 | RNVC: 2
45056088: RNCC: 5 | RNVC: 9

19 Nov 1992

5120-14-220-7496
Box Wrench

142207496
BB380: RNCC: 3 | RNVC: 9

1 Jan 1965

5120-14-363-8617
Mechanical Puller

143638617
T117A: RNCC: 3 | RNVC: 2
0000045700: RNCC: 5 | RNVC: 2
M0T457: RNCC: 5 | RNVC: 2

7 Aug 1980

5120-14-232-2500
Screw Extractor

142322500
885E5: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-524-4191
Mechanical Puller

145244191
6501EAV: RNCC: 3 | RNVC: 2

16 Mar 2001

5120-14-238-5428
Mechanical Puller

142385428
BRE: RNCC: 3 | RNVC: 2
ZINBRE: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-291-8612
Socket Wrench

142918612
SPVM: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-466-0004
Seal Inserter

144660004
0XB501-213-861-01: RNCC: 3 | RNVC: 2

27 Oct 1993

5120-14-412-4659
Mechanical Puller

144124659
H117042: RNCC: 3 | RNVC: 2

15 Oct 1986

5120-14-462-9080
Mechanical Puller

144629080
45056355: RNCC: 3 | RNVC: 2
45056355: RNCC: 5 | RNVC: 9

5 May 1993

5120-14-506-3982
Mechanical Puller

145063982
1892TTER: RNCC: 3 | RNVC: 2
OUT201892T: RNCC: 3 | RNVC: 2
1892T: RNCC: 5 | RNVC: 2

22 Apr 1998

5120-14-448-0010
Mechanical Puller

144480010
299543Q: RNCC: 3 | RNVC: 2

12 Jun 1991

5120-14-524-4937
Mechanical Puller

145244937
F26647000: RNCC: 3 | RNVC: 2

21 Mar 2001

5120-14-447-9977
Piston Inserter

144479977
A37591K: RNCC: 3 | RNVC: 2

12 Jun 1991

5120-14-220-7495
Box Wrench

142207495
BB377: RNCC: 3 | RNVC: 9

1 Jan 1965

5120-14-528-6722
Digging Bar

145286722
0152150601: RNCC: 3 | RNVC: 2
152-150: RNCC: 5 | RNVC: 2
SYQ0699: RNCC: 5 | RNVC: 2

5 Feb 2002

5120-14-390-3020
Seal Inserter

143903020
NO PRIMARY REF14-390-3020: RNCC: 3 | RNVC: 2
BL53094: RNCC: 5 | RNVC: 9
85-692-5323: RNCC: 6 | RNVC: 9

26 Jan 1984

5120-14-532-2120
Box Wrench

145322120
Y00006395: RNCC: 3 | RNVC: 2

18 Oct 2002

5120-14-422-0110
Pipe Wrench

144220110
0136530: RNCC: 3 | RNVC: 2
134.18: RNCC: 5 | RNVC: 2

16 Feb 1988

5120-14-396-0595
Seal Inserter

143960595
219914: RNCC: 3 | RNVC: 2

27 Nov 1984

5120-14-527-7146
Seal Inserter

145277146
888-489-600-1: RNCC: 3 | RNVC: 2

14 Nov 2001

5120-14-249-9418
Box Wrench

142499418
62-30X32: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-369-7937
Box Wrench

143697937
30AM013-0000009: RNCC: 3 | RNVC: 2

17 Apr 1981

5120-14-436-4732
Hand Beading Tool

144364732
853-600-160-0: RNCC: 3 | RNVC: 2

3 Jan 1990

5120-14-441-9277
Seal Inserter

144419277
2213: RNCC: 3 | RNVC: 2
5000262213: RNCC: 5 | RNVC: 2
F300 0T 009 9802: RNCC: 6 | RNVC: 9

26 Sep 1990

5120-14-300-9638
Mechanical Puller

143009638
341A93-3401-00: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-386-3913
Mechanical Puller

143863913
02640909000: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-427-2515
Drive Pin Punch

144272515
488402M83-06PN1: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-309-9496
Drive Pin Punch

143099496
0160060: RNCC: 3 | RNVC: 2
6-25: RNCC: 3 | RNVC: 2
130003: RNCC: 5 | RNVC: 2
251-2-5: RNCC: 5 | RNVC: 2
251.2,5: RNCC: 5 | RNVC: 2

1 Jan 1974

5120-14-366-8463
Driftpin

143668463
30MS087-805D: RNCC: 3 | RNVC: 2

20 Nov 1980

5120-14-306-3521
Socket Wrench

143063521
NO PRIMARY REF14-306-3521: RNCC: 3 | RNVC: 2
91-7: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-442-3622
Box Wrench

144423622
0116545: RNCC: 3 | RNVC: 2
70.17: RNCC: 5 | RNVC: 2

15 Oct 1990

5120-14-378-3389
Plier Clamp

143783389
P3: RNCC: 3 | RNVC: 9
P3: RNCC: 5 | RNVC: 2

20 Jul 1982

5120-14-391-8587
Mechanical Puller

143918587
70394060: RNCC: 3 | RNVC: 2
70394060: RNCC: 5 | RNVC: 9

21 Mar 1984

5120-14-439-2059
Mechanical Puller

144392059
MEH501: RNCC: 3 | RNVC: 2
89231282: RNCC: 5 | RNVC: 2
89280350: RNCC: 5 | RNVC: 2

25 Apr 1990

5120-14-362-6826
Driftpin

143626826
9970-123-106: RNCC: 3 | RNVC: 2

19 Mar 1980

5120-14-457-4304
Mechanical Puller

144574304
253597: RNCC: 3 | RNVC: 2
253597: RNCC: 5 | RNVC: 9

3 Sep 1992

5120-14-311-3326
Mechanical Puller

143113326
RMT: RNCC: 3 | RNVC: 2
5000260032: RNCC: 3 | RNVC: 2
SS0032: RNCC: 5 | RNVC: 2
5000260032: RNCC: 5 | RNVC: 9
ZINRMT: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-322-7338
Mechanical Puller

143227338
3000-78: RNCC: 3 | RNVC: 9

1 Jan 1975

5120-14-365-9060
Mechanical Puller

143659060
480010: RNCC: 3 | RNVC: 2

4 Nov 1980

5120-14-396-9437
Mechanical Puller

143969437
8814213000: RNCC: 3 | RNVC: 2

27 Nov 1984

5120-14-504-5730
Socket Wrench

145045730
895410-08030: RNCC: 3 | RNVC: 2

24 Feb 1998

5120-14-389-3099
Multiposition Vise

143893099
0000008819046: RNCC: 3 | RNVC: 2

29 Nov 1983

5120-14-546-2229
Crimping Tool Die

145462229
32030-6: RNCC: 3 | RNVC: 2

15 Jun 2005

5120-14-547-9326
Pipe Wrench

145479326
OUT71316-00: RNCC: 3 | RNVC: 2

28 Nov 2005

5120-14-244-4058
Socket Wrench

142444058
3107211: RNCC: 3 | RNVC: 2
80-11: RNCC: 3 | RNVC: 2
122-11: RNCC: 3 | RNVC: 9
DEM122-11: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-461-9936
Seal Inserter

144619936
36144866: RNCC: 3 | RNVC: 2

31 Mar 1993

5120-14-547-0323
Torque Screwdriver

145470323
520717: RNCC: 3 | RNVC: 2
91807248: RNCC: 5 | RNVC: 2

15 Sep 2005

5120-14-373-7835
Bench And Pipe Vise

143737835
NO PRIMARY REF14-373-7835: RNCC: 3 | RNVC: 2
101586: RNCC: 5 | RNVC: 2
282-135: RNCC: 5 | RNVC: 2

13 Nov 1981

5120-14-349-6837
Mechanical Puller

143496837
E316E174: RNCC: 3 | RNVC: 2

22 May 1978

5120-14-234-2050
Hand Beading Tool

142342050
21454: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-532-1746
Hand Scissors Jack

145321746
672572: RNCC: 3 | RNVC: 2

16 Oct 2002

5120-14-279-5884
Ratchet Wrench

142795884
13-62A62TER10: RNCC: 2 | RNVC: 2
2786-10: RNCC: 3 | RNVC: 2
323-10DR0ITEETGAUCHE10: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-539-2616
Mechanical Puller

145392616
T632G3003101: RNCC: 3 | RNVC: 2

17 Dec 2003

5120-14-250-0283
Pipe Wrench

142500283
881S: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-439-6235
Seal Inserter

144396235
6801G32-2415-20: RNCC: 3 | RNVC: 2

16 May 1990

5120-14-290-1976
Mechanical Puller

142901976
0855-78: RNCC: 3 | RNVC: 2
RA855-78: RNCC: 5 | RNVC: 9
85-642-6330: RNCC: 6 | RNVC: 9

1 Jan 1972

5120-14-380-0946
Plastic Mallet

143800946
208-50CB: RNCC: 3 | RNVC: 2
91467036: RNCC: 5 | RNVC: 2
208-50BC: RNCC: 5 | RNVC: 2

8 Nov 1982

5120-14-517-5082
Box Wrench

145175082
GS146-10X11: RNCC: 3 | RNVC: 2
1.70.1904: RNCC: 5 | RNVC: 2

3 Jan 2000

5120-14-452-2547
Box Wrench

144522547
62-1-2X9-16: RNCC: 3 | RNVC: 2
62.1/2X9/16: RNCC: 5 | RNVC: 2

8 Jan 1992

5120-14-465-9537
Prick Punch

144659537
480-01Z00ST011-001: RNCC: 3 | RNVC: 2
G6-1964-01: RNCC: 5 | RNVC: 2
06-1964-01: RNCC: 5 | RNVC: 2
G6-1964-1: RNCC: 5 | RNVC: 2

21 Oct 1993

5120-14-407-8865
Mechanical Puller

144078865
76545911300: RNCC: 3 | RNVC: 2
765459113: RNCC: 5 | RNVC: 9

5 Mar 1986

5120-14-355-6809
Plier Wrench

143556809
0182260: RNCC: 3 | RNVC: 2
520A.100: RNCC: 3 | RNVC: 2
520.100: RNCC: 5 | RNVC: 2
520-100: RNCC: 5 | RNVC: 2

19 Mar 1979

5120-14-360-3658
Box Wrench

143603658
NO PRIMARY REF14-360-3658: RNCC: 3 | RNVC: 2
22182901: RNCC: 5 | RNVC: 9
9922182901: RNCC: 5 | RNVC: 9

23 Nov 1979

5120-14-273-3171
Box Wrench

142733171
E29-071-14DR0ITEC0URANTE: RNCC: 2 | RNVC: 2

1 Jan 1971

5120-14-256-6314
Inspection Mirror

142566314
NO PRIMARY REF14-256-6314: RNCC: 3 | RNVC: 2
2728-4: RNCC: 5 | RNVC: 9

1 Jan 1969

5120-14-550-5853
Mechanical Puller

145505853
270M628-00: RNCC: 3 | RNVC: 2

28 Jun 2006

5120-14-274-8172
Pipe Wrench

142748172
NO PRIMARY REF14-274-8172: RNCC: 3 | RNVC: 2
75421-32: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-469-9066
Socket Wrench

144699066
72.13VSE: RNCC: 3 | RNVC: 2
3148511167854: RNCC: 5 | RNVC: 2
0116830: RNCC: 5 | RNVC: 9

18 May 1994

5120-14-452-9116
Mechanical Puller

144529116
15189630S: RNCC: 3 | RNVC: 2

27 Jan 1992

5120-14-524-4982
Piston Inserter

145244982
Q47797-1000: RNCC: 3 | RNVC: 2

21 Mar 2001

5120-14-438-6880
Drain Plug Wrench

144386880
321A97-0092-00: RNCC: 3 | RNVC: 2

28 Mar 1990

5120-14-386-1627
Mechanical Puller

143861627
6802J32-2237-00: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-432-7086
Seal Inserter

144327086
OUT11824-8: RNCC: 3 | RNVC: 2
0UT11824-8: RNCC: 5 | RNVC: 2

21 Jun 1989

5120-14-377-1834
Mechanical Puller

143771834
224413: RNCC: 3 | RNVC: 2
058437: RNCC: 5 | RNVC: 2
00058437: RNCC: 5 | RNVC: 2

17 May 1982

5120-14-287-5252
Socket Wrench

142875252
0117160: RNCC: 3 | RNVC: 2
72-14: RNCC: 5 | RNVC: 2
72.14: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-433-6960
Mechanical Puller

144336960
332A93-4200-00: RNCC: 3 | RNVC: 2

2 Aug 1989

5120-14-541-8120
Mechanical Puller

145418120
T947G3101124: RNCC: 3 | RNVC: 2

26 Jun 2004

5120-14-476-9459
Hand Hammer

144769459
3805022: RNCC: 3 | RNVC: 2
3805022: RNCC: 5 | RNVC: 2

12 Jul 1995

5120-14-551-1046
Hand Vise

145511046
100099: RNCC: 3 | RNVC: 2

28 Aug 2006

5120-14-432-7061
Seal Inserter

144327061
OUT11812-2: RNCC: 3 | RNVC: 2
0UT11812-2: RNCC: 5 | RNVC: 2

21 Jun 1989

5120-14-272-7643
Mechanical Puller

142727643
5218140: RNCC: 3 | RNVC: 2
21814: RNCC: 5 | RNVC: 2
FOE5218140: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-549-3765
Mechanical Puller

145493765
888-492-100-2: RNCC: 3 | RNVC: 2

28 Mar 2006

5120-14-411-9140
Driftpin

144119140
14189250Y: RNCC: 3 | RNVC: 2

16 Sep 1986

5120-14-309-9591
Mechanical Puller

143099591
440C6: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-479-1868
Socket Wrench Set

144791868
K.437E: RNCC: 3 | RNVC: 2
3148515073106: RNCC: 5 | RNVC: 2
0507310: RNCC: 5 | RNVC: 9

19 Dec 1995

5120-14-343-9668
Socket Wrench

143439668
73R3-32: RNCC: 3 | RNVC: 2
85-654-4220: RNCC: 6 | RNVC: 9

13 Jul 1977

5120-14-325-3149
Driftpin

143253149
NO PRIMARY REF14-325-3149: RNCC: 3 | RNVC: 2
98308-1: RNCC: 5 | RNVC: 9
98308-1: RNCC: 5 | RNVC: 9
85-686-1617: RNCC: 6 | RNVC: 9

2 Jul 1975

5120-14-514-3822
Open End Box Wrench

145143822
ENFD29468-10X11: RNCC: 3 | RNVC: 2

19 May 1999

5120-14-234-3456
Mechanical Puller

142343456
M02002: RNCC: 3 | RNVC: 2
0000330373: RNCC: 5 | RNVC: 2
0000330373: RNCC: 5 | RNVC: 9
330373: RNCC: 5 | RNVC: 9
DM128: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-392-1111
Mechanical Puller

143921111
356-04-018: RNCC: 3 | RNVC: 2

21 Mar 1984

5120-14-454-0084
Mechanical Puller

144540084
OUT60452: RNCC: 3 | RNVC: 2
0UT60452: RNCC: 5 | RNVC: 2

19 Mar 1992

5120-14-410-0140
Mechanical Puller

144100140
8813129000: RNCC: 3 | RNVC: 2

4 Jun 1986

5120-14-468-7834
Drive Pin Punch

144687834
251A.2,5: RNCC: 3 | RNVC: 2
251A2-5: RNCC: 5 | RNVC: 2
3148511601600: RNCC: 5 | RNVC: 2
0110897R00: RNCC: 5 | RNVC: 2
91777931: RNCC: 5 | RNVC: 2
251A.2,5: RNCC: 5 | RNVC: 2
0160160: RNCC: 5 | RNVC: 9

22 Mar 1994

5120-14-220-6540
Pinch Bar

142206540
302 500/19X500: RNCC: 3 | RNVC: 9
BB2: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-434-8078
Gear Inserter

144348078
8815464002: RNCC: 3 | RNVC: 2
89411408: RNCC: 5 | RNVC: 2

4 Oct 1989

5120-14-347-9552
Driftpin

143479552
MAS4679: RNCC: 3 | RNVC: 2
004679: RNCC: 5 | RNVC: 2

29 Mar 1978

5120-14-450-5186
Mechanical Puller

144505186
409000: RNCC: 3 | RNVC: 2
409000: RNCC: 5 | RNVC: 9

9 Oct 1991

5120-14-294-6536
Box Wrench

142946536
02640034300: RNCC: 3 | RNVC: 2
026400343: RNCC: 5 | RNVC: 2
204867: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-425-9429
Drain Plug Wrench

144259429
TH20C1-14A3: RNCC: 3 | RNVC: 2

28 Jul 1988

5120-14-404-4918
Mechanical Puller

144044918
ST159-2M361A2: RNCC: 3 | RNVC: 2

12 Nov 1985

5120-14-546-3534
Mechanical Puller

145463534
30100001437: RNCC: 3 | RNVC: 2

28 Jun 2005

5120-14-292-8732
Box Wrench

142928732
105N46X50: RNCC: 3 | RNVC: 2
55.46X50: RNCC: 3 | RNVC: 2
111-46X50: RNCC: 3 | RNVC: 9
65-46X50: RNCC: 5 | RNVC: 2
3148511116005: RNCC: 5 | RNVC: 2
55-46X50: RNCC: 5 | RNVC: 2
DEM111-46X50: RNCC: 5 | RNVC: 9
0111600: RNCC: 5 | RNVC: 9
F300 0T 002 6725: RNCC: 6 | RNVC: 9

1 Jan 1972

5120-14-480-1852
Mechanical Puller

144801852
151-1338-10: RNCC: 3 | RNVC: 2
EA2-0308: RNCC: 5 | RNVC: 2

26 Feb 1996

5120-14-273-3172
Box Wrench

142733172
E29-071-16DR0ITEC0URANTE: RNCC: 2 | RNVC: 2

1 Jan 1971

5120-14-541-0227
Float

145410227
6134422001: RNCC: 3 | RNVC: 2
3303806134076: RNCC: 5 | RNVC: 2

5 May 2004

5120-14-302-6715
Drive Pin Punch

143026715
3CGF93: RNCC: 3 | RNVC: 2
3CGF93-5: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-369-3279
Seal Inserter

143693279
366A93-3206-25: RNCC: 3 | RNVC: 2

21 Feb 1996

5120-14-391-8668
Mechanical Puller

143918668
46AM012: RNCC: 3 | RNVC: 2

21 Mar 1984

5120-14-541-0219
Hand Hammer

145410219
0447000201: RNCC: 3 | RNVC: 2
3303800447004: RNCC: 5 | RNVC: 2

5 May 2004

5120-14-428-0932
Box Wrench

144280932
55.18X21: RNCC: 3 | RNVC: 2
3148511111109: RNCC: 5 | RNVC: 2
55-18X21: RNCC: 5 | RNVC: 2
0111110: RNCC: 5 | RNVC: 9

30 Nov 1988

5120-14-527-6475
Seal Inserter

145276475
888-483-600-1: RNCC: 3 | RNVC: 2

7 Nov 2001

5120-14-468-5942
Socket Wrench

144685942
70391350: RNCC: 3 | RNVC: 2
70391350: RNCC: 5 | RNVC: 9
85-694-3806: RNCC: 6 | RNVC: 9

9 Mar 1994

5120-14-372-7649
Mechanical Puller

143727649
3130S98-03-400: RNCC: 3 | RNVC: 2
3130-98-03-400: RNCC: 5 | RNVC: 2

21 Sep 1981

5120-14-421-0233
Stud Inserter

144210233
530739: RNCC: 3 | RNVC: 2

6 Jan 1988

5120-14-386-8283
Stud Inserter

143868283
DLP750460: RNCC: 3 | RNVC: 2
DLT114039: RNCC: 5 | RNVC: 2

24 Aug 1983

5120-14-300-9621
Mechanical Puller

143009621
341A93-3220-00: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-301-0960
Mechanical Puller

143010960
330A98-3344-00: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-425-9527
Aligning Punch

144259527
500428YTH20R2: RNCC: 3 | RNVC: 2

28 Jul 1988

5120-14-555-5959
Seal Inserter

145555959
14424: RNCC: 3 | RNVC: 2

29 Nov 2007

5120-14-375-8020
Mechanical Puller

143758020
300A97326: RNCC: 3 | RNVC: 2
91369800: RNCC: 5 | RNVC: 2
300A97326: RNCC: 5 | RNVC: 2
300A97326: RNCC: 5 | RNVC: 9
300A97326: RNCC: 5 | RNVC: 9

30 Mar 1982

5120-14-522-2442
Seal Inserter

145222442
TC3045G001: RNCC: 3 | RNVC: 2
8815261000: RNCC: 5 | RNVC: 2

11 Oct 2000

5120-14-366-8456
Driftpin

143668456
30MS087-801G: RNCC: 3 | RNVC: 2

20 Nov 1980

5120-14-511-3838
Mechanical Puller

145113838
MGB094-47: RNCC: 3 | RNVC: 2
MGB094-47: RNCC: 5 | RNVC: 2

16 Dec 1998

5120-14-537-6024
Oil Filter Wrench

145376024
628-2: RNCC: 3 | RNVC: 2

12 Nov 2003

5120-14-450-6827
Ratchet Wrench

144506827
MT12681200FS595A: RNCC: 3 | RNVC: 2
1048390L00: RNCC: 5 | RNVC: 2

16 Oct 1991

5120-14-441-2197
Hand Rivet Set

144412197
6801M10-0053-02: RNCC: 3 | RNVC: 2

22 Aug 1990

5120-14-375-2537
Mechanical Puller

143752537
73-115-026: RNCC: 3 | RNVC: 2

26 Feb 1982

5120-14-503-5739
Mechanical Puller

145035739
MGB089-22: RNCC: 3 | RNVC: 2
MGB089-22: RNCC: 5 | RNVC: 2

21 Jan 1998

5120-14-352-3179
Box Wrench

143523179
MHD334-46: RNCC: 3 | RNVC: 2
MHC288-22: RNCC: 5 | RNVC: 2
MHD334-46: RNCC: 5 | RNVC: 2

16 Oct 1978

5120-14-329-6339
Mechanical Puller

143296339
M31-070: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-436-1668
Drill Guide

144361668
2642188-23: RNCC: 3 | RNVC: 2

6 Dec 1989

5120-14-304-1784
Blacksmiths' Tongs

143041784
3814-25-35: RNCC: 3 | RNVC: 9

1 Jan 1974

5120-14-321-0803
Box Wrench

143210803
50.56: RNCC: 3 | RNVC: 2
3148511068205: RNCC: 5 | RNVC: 2
50-56: RNCC: 5 | RNVC: 2
0106820: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-519-8939
Drive Pin Punch

145198939
NO PRIMARY REF14-519-8939: RNCC: 3 | RNVC: 2
231017: RNCC: 5 | RNVC: 9

19 Apr 2000

5120-14-442-3602
Box Wrench

144423602
68B.14X15: RNCC: 3 | RNVC: 2
3148511162415: RNCC: 5 | RNVC: 2
0714 23 27: RNCC: 5 | RNVC: 2
0116241: RNCC: 5 | RNVC: 9

15 Oct 1990

5120-14-364-6361
Hand Rivet Set

143646361
067240: RNCC: 3 | RNVC: 2
XG5-32CH: RNCC: 5 | RNVC: 2

2 Sep 1980

5120-14-390-4256
C Clamp

143904256
450-60: RNCC: 3 | RNVC: 2
3870-60: RNCC: 3 | RNVC: 9
3272670246867: RNCC: 5 | RNVC: 2

26 Jan 1984

5120-14-441-4694
Plier Wrench

144414694
507A: RNCC: 3 | RNVC: 2
3148511813621: RNCC: 5 | RNVC: 2
507A: RNCC: 5 | RNVC: 2
1011876Q00: RNCC: 5 | RNVC: 2
0714 09 09: RNCC: 5 | RNVC: 2
FACOM 507A: RNCC: 5 | RNVC: 2
0181362: RNCC: 5 | RNVC: 9
958 210 000 001: RNCC: 6 | RNVC: 9

29 Aug 1990

5120-14-453-1149
Mechanical Puller

144531149
008182050P: RNCC: 3 | RNVC: 2

5 Feb 1992

5120-14-434-3257
Seal Inserter

144343257
EMH141378AP: RNCC: 3 | RNVC: 2
EMH141378AP: RNCC: 5 | RNVC: 9

20 Sep 1989

5120-14-294-0705
Machinist's Vise

142940705
NO PRIMARY REF14-294-0705: RNCC: 3 | RNVC: 2
331A30: RNCC: 5 | RNVC: 2
4213-100FIXE: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-433-3122
Aligning Punch

144333122
853-202-561-0: RNCC: 3 | RNVC: 2

19 Jul 1989

5120-14-362-8000
Mechanical Puller

143628000
430: RNCC: 3 | RNVC: 2

19 Mar 1980

5120-14-508-3686
Seal Inserter

145083686
300A99386: RNCC: 3 | RNVC: 2
300A99386: RNCC: 5 | RNVC: 2

9 Sep 1998

5120-14-370-2302
Mechanical Puller

143702302
8810581100: RNCC: 3 | RNVC: 2

18 May 1981

5120-14-281-8190
Drive Pin Punch

142818190
8810003028: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-524-4938
Mechanical Puller

145244938
F26656000: RNCC: 3 | RNVC: 2

21 Mar 2001

5120-14-283-6542
Hand Screw Jack

142836542
4863-5000: RNCC: 3 | RNVC: 9
14-527-6290: RNCC: 6 | RNVC: 9

1 Jan 1972

5120-14-541-0241
Hammer Handle

145410241
6674000301: RNCC: 3 | RNVC: 2
3303806674008: RNCC: 5 | RNVC: 2

5 May 2004

5120-14-257-9832
C Clamp

142579832
RAVU: RNCC: 3 | RNVC: 2
0001079800: RNCC: 5 | RNVC: 2
SUS04: RNCC: 5 | RNVC: 2

1 Jan 1969

5120-14-385-9682
Mechanical Puller

143859682
139670Q: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-312-5921
Drive Pin Punch

143125921
588330: RNCC: 3 | RNVC: 9

1 Jan 1974

5120-14-298-7909
Hand Shovel

142987909
4747-31-4752: RNCC: 3 | RNVC: 9

1 Jan 1973

5120-14-464-9096
Drill Guide

144649096
851-930-211-0: RNCC: 3 | RNVC: 2

8 Sep 1993

5120-14-264-3222
Hand Rivet Set

142643222
13-11-12: RNCC: 2 | RNVC: 2

1 Jan 1970

5120-14-463-3654
Drill Guide

144633654
0455465W00: RNCC: 3 | RNVC: 2

9 Jun 1993

5120-14-380-6774
Plier Clamp

143806774
P12C: RNCC: 3 | RNVC: 9

29 Nov 1982

5120-14-329-8304
Mechanical Puller

143298304
8811219000: RNCC: 3 | RNVC: 2
7M123AA: RNCC: 5 | RNVC: 2

2 Jul 1975

5120-14-300-9624
Mechanical Puller

143009624
341A93-3224-00: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-364-7899
Seal Inserter

143647899
16849163: RNCC: 3 | RNVC: 2
16849163: RNCC: 5 | RNVC: 9

2 Sep 1980

5120-14-420-8205
Box Wrench

144208205
1892-32: RNCC: 3 | RNVC: 2

16 Dec 1987

5120-14-350-6022
Lamp Extractor

143506022
0UT57A: RNCC: 3 | RNVC: 2

12 Jul 1978

5120-14-530-1990
Drive Pin Punch Set

145301990
MOD.CG1PB: RNCC: 3 | RNVC: 2

22 May 2002

5120-14-528-6725
Hammer Handle

145286725
6605000301: RNCC: 3 | RNVC: 2
SYQ0703: RNCC: 5 | RNVC: 2

5 Feb 2002

5120-14-305-2020
Socket Wrench

143052020
U26-13X17: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-528-0651
Seal Inserter

145280651
888-513-000-1: RNCC: 3 | RNVC: 2

12 Dec 2001

5120-14-524-1220
Drive Pin Punch

145241220
48327421-3: RNCC: 3 | RNVC: 2
7511-183-27421-3: RNCC: 5 | RNVC: 9

2 Mar 2001

5120-14-266-0888
Hand Scissors Jack

142660888
40677: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-488-5540
Socket Wrench

144885540
77A.TO: RNCC: 3 | RNVC: 2
0121446: RNCC: 5 | RNVC: 2
3148511214466: RNCC: 5 | RNVC: 2
0695 257 612: RNCC: 5 | RNVC: 2
77AT0: RNCC: 5 | RNVC: 9

21 May 1997

5120-14-459-0024
Socket Wrench

144590024
5000790201: RNCC: 3 | RNVC: 2
5000790201: RNCC: 5 | RNVC: 2

11 Nov 1992

5120-14-340-7601
Hand Hammer Head

143407601
118-750: RNCC: 3 | RNVC: 2

14 Feb 1977

5120-14-314-1563
Box Wrench

143141563
55.14X15: RNCC: 3 | RNVC: 2
105N14X15: RNCC: 3 | RNVC: 2
111-14X15: RNCC: 3 | RNVC: 9
3148511110003: RNCC: 5 | RNVC: 2
55-14X15: RNCC: 5 | RNVC: 2
0713 305 145: RNCC: 5 | RNVC: 2
DEM111-14X15: RNCC: 5 | RNVC: 9
0111000: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-294-0713
Machinist's Vise

142940713
NO PRIMARY REF14-294-0713: RNCC: 3 | RNVC: 2
331A51: RNCC: 5 | RNVC: 2
4214-140T0URNANT: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-311-1674
Socket Wrench

143111674
76.14: RNCC: 3 | RNVC: 2
76-14: RNCC: 5 | RNVC: 2
237-6551: RNCC: 5 | RNVC: 2
3148511208601: RNCC: 5 | RNVC: 2
0110823T00: RNCC: 5 | RNVC: 2
91369645: RNCC: 5 | RNVC: 2
2695 612 614: RNCC: 5 | RNVC: 2
0120860: RNCC: 5 | RNVC: 9
FACOM76.14: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-201-5650
Scratch Awl

142015650
NO PRIMARY REF14-201-5650: RNCC: 3 | RNVC: 2
109-2M: RNCC: 5 | RNVC: 9

1 Jan 1962

5120-14-284-6184
Drive Pin Punch

142846184
201 500-0,055KG: RNCC: 3 | RNVC: 9
98201522: RNCC: 5 | RNVC: 9
BB500: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-207-5118
Socket Wrench Set

142075118
NO PRIMARY REF14-207-5118: RNCC: 3 | RNVC: 2
W12-11BU: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-257-1788
Socket Wrench

142571788
6742-08: RNCC: 3 | RNVC: 2

1 Jan 1969

5120-14-432-2511
Hand Tube Bender

144322511
2514012: RNCC: 3 | RNVC: 2

31 May 1989

5120-14-545-9144
Drive Pin Punch Set

145459144
249GJ5: RNCC: 3 | RNVC: 2
249GJ5: RNCC: 5 | RNVC: 2

27 May 2005

5120-14-385-3365
Mechanical Puller

143853365
365A93-3345-00: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-343-9813
Box Wrench

143439813
9970-115-585: RNCC: 3 | RNVC: 2
85-689-5591: RNCC: 6 | RNVC: 9

13 Jul 1977

5120-14-404-0147
Mechanical Puller

144040147
350A93-3700-01: RNCC: 3 | RNVC: 2

11 Sep 1985

5120-14-428-5536
Driftpin

144285536
MKG3712214: RNCC: 3 | RNVC: 2

8 Dec 1988

5120-14-328-6361
Ratchet Wrench

143286361
BP7694: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-430-8914
Hand Beading Tool

144308914
800A995400: RNCC: 3 | RNVC: 2

29 Mar 1989

5120-14-484-4323
Socket Wrench

144844323
888-400-800-1: RNCC: 3 | RNVC: 2

14 Nov 1996

5120-14-406-9433
Driftpin

144069433
853-201-405-0: RNCC: 3 | RNVC: 2

22 Jan 1986

5120-14-545-9158
Drive Pin Punch

145459158
210442: RNCC: 3 | RNVC: 2

27 May 2005

5120-14-443-9586
Ratchet Wrench

144439586
W 960: RNCC: 3 | RNVC: 9

17 Dec 1990

5120-14-411-3235
Mechanical Puller

144113235
330A93-2039-27: RNCC: 3 | RNVC: 2

6 Aug 1986

5120-14-481-6031
Mechanical Puller

144816031
NO PRIMARY REF14-481-6031: RNCC: 3 | RNVC: 2
807619: RNCC: 5 | RNVC: 9

16 May 1996

5120-14-320-7218
Mechanical Puller

143207218
C47698: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-407-3332
Mechanical Puller

144073332
853-290-007-0: RNCC: 3 | RNVC: 2

12 Feb 1986

5120-14-254-4194
Socket Wrench

142544194
23002639: RNCC: 3 | RNVC: 2
23002639-6: RNCC: 5 | RNVC: 2
35-18: RNCC: 5 | RNVC: 2

1 Jan 1969

5120-14-375-1757
Socket Wrench

143751757
16380143: RNCC: 3 | RNVC: 2
16380143: RNCC: 5 | RNVC: 9

26 Feb 1982

5120-14-458-5128
Mechanical Puller

144585128
60909696: RNCC: 3 | RNVC: 2
89467820: RNCC: 5 | RNVC: 2

23 Oct 1992

5120-14-458-5358
Mechanical Puller

144585358
45056149: RNCC: 3 | RNVC: 2
45056149: RNCC: 5 | RNVC: 9

23 Oct 1992

5120-14-208-6289
Socket Wrench

142086289
NO PRIMARY REF14-208-6289: RNCC: 3 | RNVC: 2
025-910: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-523-8470
Rack Bar Jack

145238470
1699202: RNCC: 3 | RNVC: 2
0233064N00: RNCC: 5 | RNVC: 2
FOE1699202: RNCC: 5 | RNVC: 9

7 Feb 2001

5120-14-422-2366
Socket Wrench

144222366
0372-42-10083: RNCC: 3 | RNVC: 2

24 Feb 1988

5120-14-447-6257
Socket Wrench

144476257
617-22141-00: RNCC: 3 | RNVC: 2

29 May 1991

5120-14-518-7214
Lamp Extractor

145187214
26529960-40: RNCC: 3 | RNVC: 2
26529960-40: RNCC: 5 | RNVC: 2

16 Feb 2000

5120-14-316-1610
Mechanical Puller

143161610
A129581: RNCC: 3 | RNVC: 2
100297: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-437-2566
Seal Inserter

144372566
IND75109: RNCC: 3 | RNVC: 2

24 Jan 1990

5120-14-530-6407
Seal Inserter

145306407
D47692R4: RNCC: 3 | RNVC: 2

1 Jul 2002

5120-14-291-1104
Tire Iron

142911104
NO PRIMARY REF14-291-1104: RNCC: 3 | RNVC: 2
C0P41I771: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-368-2073
Tire Removing Tool

143682073
1104519200: RNCC: 3 | RNVC: 2
45192: RNCC: 5 | RNVC: 2
719A: RNCC: 5 | RNVC: 2
49553: RNCC: 5 | RNVC: 2

20 Feb 1981

5120-14-533-0222
Mechanical Puller

145330222
899219: RNCC: 3 | RNVC: 2

17 Jan 2003

5120-14-552-8382
Machinist's Vise

145528382
1223.105E: RNCC: 3 | RNVC: 2
3148512257509: RNCC: 5 | RNVC: 2
1223.105E: RNCC: 5 | RNVC: 2

7 Feb 2007

5120-14-371-1584
Hand Hammer

143711584
861-30: RNCC: 3 | RNVC: 2

5 Jun 1981

5120-14-509-9586
Hand Tube Bender

145099586
006-513-222: RNCC: 3 | RNVC: 2
5120AA1120818: RNCC: 6 | RNVC: 9

4 Nov 1998

5120-14-550-2198
Box Wrench

145502198
1949-5-8-3-4: RNCC: 3 | RNVC: 2

12 Jun 2006

5120-14-405-4356
Seal Inserter

144054356
927375: RNCC: 3 | RNVC: 2
927375: RNCC: 5 | RNVC: 9

27 Nov 1985

5120-14-411-9188
Driftpin

144119188
27980110: RNCC: 3 | RNVC: 2

16 Sep 1986

5120-14-304-1856
Pipe Vise And Stand

143041856
2006200: RNCC: 3 | RNVC: 2
2006-1: RNCC: 5 | RNVC: 2

1 Jan 1974

5120-14-425-9551
Driftpin

144259551
500482LTH20R2: RNCC: 3 | RNVC: 2

28 Jul 1988

5120-14-299-6267
Mechanical Puller

142996267
6121440: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-281-8188
Drive Pin Punch

142818188
8810003009: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-344-1282
Mechanical Puller

143441282
8811665000: RNCC: 3 | RNVC: 2

13 Jul 1977

5120-14-517-1626
Socket Wrench

145171626
Z11100070: RNCC: 3 | RNVC: 2

10 Nov 1999

5120-14-481-1756
Socket Wrench

144811756
GS141-8: RNCC: 3 | RNVC: 2

25 Apr 1996

5120-14-201-2360
Screw Extractor

142012360
285.6: RNCC: 3 | RNVC: 2
0695 348 314: RNCC: 5 | RNVC: 2
285-6: RNCC: 5 | RNVC: 2
3148511650400: RNCC: 5 | RNVC: 2
0165040: RNCC: 5 | RNVC: 9

1 Jan 1962

5120-14-300-9671
Driftpin

143009671
341A94-2710-10: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-377-1841
Seal Inserter

143771841
225983: RNCC: 3 | RNVC: 2
00059983: RNCC: 5 | RNVC: 2
059983: RNCC: 5 | RNVC: 2

17 May 1982

5120-14-202-8604
Socket Wrench

142028604
NO PRIMARY REF14-202-8604: RNCC: 3 | RNVC: 2
SA97: RNCC: 5 | RNVC: 9

1 Jan 1963

5120-14-323-2066
Open End Box Wrench

143232066
103-5-8X11-16: RNCC: 3 | RNVC: 2

1 Jan 1975

Load More Results