What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.

A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Blacksmith's Punch?

A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Mechanical Finger?

A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.

A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Screwdriver And Wrench Assembly?

A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Stakeholder Bench Plate?

A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.

What is a Drill Drift?

A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.

A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Digging Bar?

A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

What is a Valve Spring Lifter?

A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.

What is a Fuse Puller?

A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.

Hand Tools, Nonedged, Nonpowered - France (FR)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by France (FR) - NCB is 14

Page 108 of 110

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by France

51	20	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - France (FR)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 16 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Pipe Vise? 19 Items: A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.
What is a Hand Vise? 25 Items: A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.
What is a Hand Hydraulic Jack? 133 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 153 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 903 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 17 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
Swage,Bottom,Blacksmith's 10 Items
What is a Hand Tube Flaring Tool? 23 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Blacksmith's Punch? 12 Items: A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.
What is a Drain Plug Wrench? 45 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 57 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 16 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 3829 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
Flatter,Blacksmith's 18 Items
Swage,Top,Blacksmith's 12 Items
What is a Pipe Wrench? 110 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 149 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 53 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
Screwdriver,Offset 54 Items
What is a Screwdriver Bit? 707 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Mechanical Finger? 25 Items: A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.
What is a Socket Wrench Socket? 1803 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 1412 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 1641 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 52 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 565 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
Jack,Push-Pull,Screw 30 Items
What is a Hand Tube Bender? 54 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 1106 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 55 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pinch Bar? 19 Items: A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.
What is a Pry Bar? 17 Items: A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.
What is a Wrecking Bar? 15 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 273 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 413 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 32 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 295 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
Face,Hammer,Inserted 25 Items
What is a Hole Sheet Metal Holder? 37 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Screwdriver And Wrench Assembly? 11 Items: A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.
What is a Hand Rivet Set? 121 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Stakeholder Bench Plate? 22 Items: A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.
What is a Drill Drift? 32 Items: A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.
What is a Tack Claw? 15 Items: A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.
Mattock 28 Items
What is a Socket Wrench Handle Bar? 108 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Stake,Sheet Metalworking 50 Items
Riveter,Blind,Hand 76 Items
What is a Hand Shovel? 43 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 98 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 30 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
What is a Digging Bar? 20 Items: A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.
Block,Dolly,Sheet Metalworking 56 Items
What is a Piston Ring Compressor? 34 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Valve Spring Lifter? 29 Items: A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.
What is a Fuse Puller? 20 Items: A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.
What is a Hand Lead Seal Press? 18 Items: A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.
What is a Hand Beading Tool? 91 Items: A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.
What is a Hand Hammer? 502 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
Head,Hand Hammer 81 Items
What is a Lamp Extractor? 76 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Tube Packing Ring Installing Tool? 29 Items: A Tube Packing Ring Installing Tool (INSTALLING TOOL,TUBE PACKING RING) is an item designed to insert packing rings on tubes within tube sheets on condensers and similar heat exchangers. In operation, the packing rings are assembled on the loading pin mandrel and are then transferred from the mandrel on to the tube by means of a tubular sleeve which slides on the mandrel.
What is a Carpenters' Pincers? 18 Items: A Carpenters' Pincers (PINCERS,CARPENTERS') is a plierlike hand tool having two opposing jaws which may have hammerlike backs. One handle has a nail or tack pulling claw, the other is shaped to form a screwdriver. The tool may contain a wire cutter. See also NIPPERS, END CUTTING and PINCERS, FARRIERS'.
What is a Trowel? 33 Items: A Trowel is a tool used for bricklaying, concrete work, plastering, linoleum laying, and masonry work. Excludes CORNER TOOL, CONCRETE.
What is a Hand Abrasive Wheel Dresser? 12 Items: A Hand Abrasive Wheel Dresser (DRESSER,ABRASIVE WHEEL,HAND) is a tool designed to remove glaze from, dress, shape, sharpen, and true solid abrasive wheels. Excludes NIB, DIAMOND, WHEEL DRESSING.
What is a Lamp Cap Extractor? 32 Items: A Lamp Cap Extractor (EXTRACTOR,LAMP CAP) is a tool specifically designed to facilitate the removal of lamp caps from switchboards, panels or indicator lamps.
What is a Rivet Bucking Bar? 51 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 86 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 277 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Woven Cable Grip? 23 Items: A Woven Cable Grip (GRIP,CABLE,WOVEN) is a braided wire device designed to clutch a bare or insulated conductor, cable or wire rope, for holding taut or drawing through conduit.
What is a Screw Thread Insert Extractor? 19 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is an Electron Tube Extractor? 18 Items: An Electron Tube Extractor (EXTRACTOR,ELECTRON TUBE) is a hand tool designed to facilitate the removal of electron tubes from electronic equipment and to avoid burning the fingers. It may be used for installing tubes.
What is a Cross Tip Screwdriver? 362 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 21 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 11 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 37 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Tool Handle Wedge? 10 Items: A Tool Handle Wedge (WEDGE,TOOL HANDLE) is excludes WEDGE, WOOD.
What is a Marlinespike? 16 Items: A Marlinespike is a metal hand tool made in the shape of a tapered pin. One end is pointed and the opposite end may be headed. The body may contain an eye for a lanyard sling, or be grooved lengthwise. Excludes CABLE PICK and FID.
What is an Aligning Punch? 272 Items: An Aligning Punch (PUNCH,ALIGNING) is a round, square, hexagonal or octagonal bodied hand tool, having a round tapered section 6-1/2 inches (165.1 mm) or more in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, DRIFT and DRIFTPIN.
What is a Drift Punch? 25 Items: A Drift Punch (PUNCH,DRIFT) is a round, square, hexagonal, or octagonal bodied hand tool, having a round tapered section 4 to 6 inches (101.6 mm to 152.4 mm) inclusive in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, ALIGNING; and DRIFTPIN.
What is a Putty Knife? 36 Items: A Putty Knife (KNIFE,PUTTY) is a hand tool with a nonedged blade fixed to a handle for laying on and smoothing putty and the like.
What is a Socket Wrench Adapter-Extension? 40 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 30 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 184 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Socket Wrench Ratchet Attachment? 47 Items: A Socket Wrench Ratchet Attachment (RATCHET ATTACHMENT,SOCKET WRENCH) is a connection for socket wrenches and handles. Consists of a ratcheting mechanism with an internal drive on one end and an external drive on the opposite end of the same size. The item is designed to permit continuous rotation of the socket in one direction without removing the socket or handle and without a complete rotation of the handle.
What is a Wrench Extension Handle? 81 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Socket Wrench Crowfoot Attachment? 155 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 33 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 43 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 48 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 2394 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 372 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 300 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 661 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 32 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand-Operated Grommet And Eyelet Press? 12 Items: A Hand-Operated Grommet And Eyelet Press (PRESS,GROMMET AND EYELET,HAND-OPERATED) is a device which punches or pierces holes and in addition fastens or sets eyelets and grommets in cloth, paper and similar material. May be used for fastening or setting rivets, lacing hooks and snaps in cloth, paper and similar material. It is hand operated by lever or screw action. See also PUNCH, EYELET, PLIER TYPE and PRESS, GROMMET AND EYELET, FOOT OPERATED.
What is a Claw Bar? 19 Items: A Claw Bar (BAR,CLAW) is before using, refer to Reference Drawing Group AG.
What is a Shock Type Wheel Stud Nut Wrench? 11 Items: A Shock Type Wheel Stud Nut Wrench (WRENCH,WHEEL STUD NUT,SHOCK TYPE) is a manually operated item designed to remove wheel stud nuts. In operation the inner nut is turned by a socket attached to a shaft on which is a loose swinging weighted handle. The weighted handle may be swung quickly to provide an impact force against the socket to loosen the seized or jammed nuts. The outer nut is held stationary by a separate hexagonal holding wrench.
What is a Drift Pin Set? 30 Items: A Drift Pin Set is a group of DRIFTPIN having different characteristics.
What is a Tire Iron? 25 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 115 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Blacksmith's Vise? 14 Items: A Blacksmith's Vise (VISE,BLACKSMITH'S) is a clamping device consisting of a mounting plate, one stationary and one manual screw actuated jaw and a supporting member extending downward from the stationary jaw to the floor. Designed to be mounted on a bench, table or the like. May include pipe holding jaws.
What is a Machinist's Vise? 64 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Clamp Base Bench Vise? 10 Items: A Clamp Base Bench Vise (VISE,BENCH,CLAMP BASE) is a clamping device consisting of a base, one stationary and one manual screw actuated jaw, and one or more guide bars or rods. Designed with an integral clamp for attaching to a bench, table, or the like. Does not include pipe holding jaws.
What is a Fixed Open End Wrench Set? 86 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Nail Set? 11 Items: A Nail Set is a round knurled, square, hexagonal or octagonal bodied hand tool having a round tapered section terminating in a cupped point. It is designed to set brad head nails below the surface by striking it a hammerlike blow. See also PUNCH, DRIVE PIN.
What is a Socket Wrench Set? 202 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is an Open End Box Wrench Set? 10 Items: An Open End Box Wrench Set (WRENCH SET,OPEN END BOX) is a group of WRENCH, OPEN END BOX having different characteristics.
What is a Combination Box And Open End Wrench Set? 72 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Box Wrench Set? 36 Items: A Box Wrench Set (WRENCH SET,BOX) is a group of box wrenches having different characteristics. It may include a HANDLE, EXTENSION WRENCH. See also WRENCH SET, COMBINATION, BOX AND OPEN END.
What is a Hot Line Stick? 26 Items: A Hot Line Stick is a hand tool consisting of a straight, round stick (pole) made of a suitable nonconductive material with a tool fixed to one end. The other end may be plain or have a butt mounting device fixed to it. Various types of attachments (hooks, rings, and bands) may be fixed to the body. It is designed for use in the repair and maintenance of live high voltage aerial lines. Excludes hot line sticks without heads.
Handle,Mattock-Pick 15 Items
What is a Wrench Kit? 73 Items: A Wrench Kit is an assortment of various types and sizes of wrenches such as SOCKET, SOCKET WRENCH; WRENCH, OPEN END, FIXED; WRENCH, BOX and the like. It may include adapter(s), ratchet(s) and the like. See also WRENCH SET (as modified.
What is a Brad Awl? 15 Items: A Brad Awl (AWL,BRAD) is a small, pointed tool used by shoemakers, saddlers, cabinetmakers, and the like for piercing small holes in wood, leather, and similar materials, and consists of a handle with a ferrule and a blade. The blade is round, terminating in a beveled, sharp straight edge and has a shank which passes through the center of the handle.
What is a Scratch Awl? 20 Items: A Scratch Awl (AWL,SCRATCH) is an item whose nominal length of blade is less than 4 inches (101.6 millimeters) and is provided with a nondetachable handle.
What is a Screw Extractor Set? 10 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 102 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
Jack,Scissors,Hand 26 Items
What is a Piston Ring Expander? 23 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
Mallet,Plastic 62 Items
Mallet,Rubber 10 Items
What is a Wood Mallet? 37 Items: A Wood Mallet (MALLET,WOOD) is excludes MALLET, CALKING; MALLET, HAWSING and MALLET, SERVING.
What is a Rack Bar Jack? 30 Items: A Rack Bar Jack (JACK,RACK BAR) is excludes JACK, BUMPER and JACK, REEL, HAND.
What is a Pneumatic Tire Valve Core Inserter And Remover? 14 Items: A Pneumatic Tire Valve Core Inserter And Remover (INSERTER AND REMOVER,PNEUMATIC TIRE VALVE CORE) is a bar of steel having a small cylindrical slotted end for removing or installing a valve core in a valve stem by a screwing motion. See also REPAIR TOOL, PNEUMATIC TIRE VALVE.
What is a Hand Tube Swaging Tool Kit? 20 Items: A Hand Tube Swaging Tool Kit (SWAGING TOOL KIT,TUBE,HAND) is a hand-operated noncutting tool consisting of one or more PUNCH, TUBE SWAGING, HAND and a tube flaring bar.
What is a Hand Tube Flaring Punch? 11 Items: A Hand Tube Flaring Punch (PUNCH,TUBE FLARING,HAND) is a noncutting tool having a shaped end or section designed to flare the ends of tubes. One type is designed to flare the ends of tubes against a tube sheet, and another to flare tube ends to mate with tube fittings. Includes punch components of FLARING TOOL, TUBE, HAND.
What is a Hose Strap Band Clamping Tool? 26 Items: A Hose Strap Band Clamping Tool (CLAMPING TOOL,STRAP BAND,HOSE) is an item designed to tension and lock metal straps around a rubber hose, and the like. It is also used to clamp and hold fittings therein.
What is a Mechanical Puller? 3073 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 470 Items
What is a Slip Joint Pliers? 84 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Brake Repair Pliers? 14 Items: A Brake Repair Pliers (PLIERS,BRAKE REPAIR) is a tool having jaws designed for use in brake repair operations, such as removing and replacing items such as keys, springs, and the like. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 226 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 12 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 81 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 56 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 15 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 11 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 29 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Cross Tip Screwdriver Set? 14 Items: A Cross Tip Screwdriver Set (SCREWDRIVER SET,CROSS TIP) is a group of SCREWDRIVER, CROSS TIP having different characteristics.
What is a Spanner Wrench Set? 18 Items: A Spanner Wrench Set (WRENCH SET,SPANNER) is a group of items under WRENCH, SPANNER having different characteristics.
What is a Drive Pin Punch Set? 31 Items: A Drive Pin Punch Set (PUNCH SET,DRIVE PIN) is a group of PUNCH, DRIVE PIN having different characteristics.
What is an Aligning Punch Set? 13 Items: An Aligning Punch Set (PUNCH SET,ALIGNING) is a group of PUNCH, ALIGNING having different characteristics. See also DRIFTPIN SET.
What is a Slugging Type Box Wrench Socket? 16 Items: A Slugging Type Box Wrench Socket (SOCKET,SLUGGING TYPE BOX WRENCH) is an item having a hexagonal external drive at one end, made to fit into the internal hexagonal or 12-point opening of a slugging type box wrench. The opposite end has a single-broached hexagonal opening of the same size as the external drive. The item is designed with extra thick walls to withstand the impact of sledge blows on the driving wrench.
What is a Mechanical Puller Step Plate? 44 Items: A Mechanical Puller Step Plate (STEP PLATE,MECHANICAL PULLER) is a circular disk, flanged to provide a shoulder, and designed to provide a base for the screw point of a PULLER, MECHANICAL when pulling externally mounted bearings, gears, and the like from hollow shafts or housings. It has a concentric, countersunk hole to accommodate the puller screw point.
What is a Solid Center Punch? 79 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Cable Type Ratchet Lever Puller? 20 Items: A Cable Type Ratchet Lever Puller (PULLER,RATCHET LEVER,CABLE TYPE) is an item consisting of a metal frame and ratchet lever reel to which is attached one end of a flexible cable (wire rope). The cable feeds through the fast eye in the metal frame, and may be reeved through a slip hook tackle hook. See also BINDER, LOAD; HOIST, WIRE ROPE and STRETCHER, WIRE.
What is an Electronic Equipment Tuning Wand? 18 Items: An Electronic Equipment Tuning Wand (TUNING WAND,ELECTRONIC EQUIPMENT) is a hand-held rod used in determining the adjustment of the windings of a radio frequency coil. It is made of insulating material with iron on one end and brass on the other end. By inserting the iron end in the coil, the inductance is increased and by inserting the brass end, the inductance is decreased.
What is a Combination Open End And Spanner Wrench? 14 Items: A Combination Open End And Spanner Wrench (WRENCH,OPEN END AND SPANNER,COMBINATION) is a tool having open end wrench characteristics at one end and spanner wrench features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s) at the other end.
What is a Detent Handling Tool? 187 Items: A Detent Handling Tool (HANDLING TOOL,DETENT) is a specially designed handling tool consisting of a rigid bar with a T-handle on one end. The other end is equipped with threads designed to mate the threads of a detent to facilitate inserting or extracting.
What is a Hand Material Handling Hook? 23 Items: A Hand Material Handling Hook (HOOK,MATERIAL HANDLING,HAND) is a hook whose curved end conforms to Style AP1, AP2, AP3 or AP4 of Reference Drawing Group AP. Excludes HOOK, MANHOLE COVER, HAND; HOOK, WIRE BREAKING, HAND; HOOK, ROCK CRUSHER FEEDING, HAND; HOOK, STRAINER REMOVING, HAND and HOOKS, BAG HANDLING, HAND.
What is a Magnetic Retrieving Tool? 11 Items: A Magnetic Retrieving Tool (RETRIEVING TOOL,MAGNETIC) is a hand-operated magnetic device used to locate and pick up metallic articles, such as bolts, nuts, pins, washers, and the like, in confined spaces. It may be rigid, flexible or adjustable. Excludes FINGER, MECHANICAL.
What is a Mechanical Puller Adapter? 78 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Combination Box And Open End Box Wrench? 13 Items: A Combination Box And Open End Box Wrench (WRENCH,BOX AND OPEN END BOX,COMBINATION) is a double end wrench, box and open end box, primarily designed for removing or replacing tube fittings. The opening in the open end box may be machined at an angle from the longitudinal center line of the wrench.
What is a Screw Thread Insert Inserter? 136 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Flat Tip Screwdriver Set? 48 Items: A Flat Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP) is a group of SCREWDRIVER, FLAT TIP having different characteristics.
What is a Terminal Crimping Tool Contact Positioner? 89 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 16 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is an Adjustable Wrench? 138 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 239 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 75 Items
Handle,Shovel 10 Items
What is a Socket Wrench Spanner Attachment? 88 Items: A Socket Wrench Spanner Attachment (SPANNER ATTACHMENT,SOCKET WRENCH) is an item having an adjustable or fixed span with pin, hook, or key type end that is used to fit and turn various size retaining rings, cover plates, plugs, couplings, and like parts. Usually designed to be driven by a male driver.
What is a Retaining Ring Installation Tool? 44 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Tacker? 16 Items: A Tacker is a hand-operated, hammerlike or gunlike item without a clincher, used to drive preformed connecting elements like pins, nails or staples through one object or piece of material into another. Excludes STAPLER (as modified).
What is a Bearing And Bushing Inserter? 290 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 207 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 939 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 14 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 93 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 161 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 94 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 141 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 53 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Six Point Tip Screwdriver? 155 Items: A Six Point Tip Screwdriver (SCREWDRIVER,SIX POINT TIP) is a manual screwdriver having a single nonremoveable blade having a tip with six rounded points.
What is a Seal Inserter And Remover? 147 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 478 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is a Preformed Packing Inserter And Remover? 34 Items: A Preformed Packing Inserter And Remover (INSERTER AND REMOVER,PREFORMED PACKING) is a hand tool designed to install and remove a PACKING, PREFORMED.
What is a Pin Remover? 34 Items: A Pin Remover (REMOVER,PIN) is a hand tool designed to facilitate the removal of a pin from a hole.
What is a Pin Inserter And Remover? 13 Items: A Pin Inserter And Remover (INSERTER AND REMOVER,PIN) is a rodlike tool designed to facilitate the insertion and removal of a pin from a hole.
What is an Electrical Contact Inserter And Remover? 37 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Piston Inserter? 40 Items: A Piston Inserter (INSERTER,PISTON) is a tool designed to permit installation of a piston or piston assembly without damaging the packings or piston.
What is a Spring Inserter And Remover? 85 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 13 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Stud Inserter? 22 Items: A Stud Inserter (INSERTER,STUD) is a device designed to drive in studs. It does not have any facilities for removing or extracting studs. See also INSERTER AND REMOVER, STUD.
What is a Stud Inserter And Remover? 17 Items: A Stud Inserter And Remover (INSERTER AND REMOVER,STUD) is a group of items designed to extract and to drive studs. It may include collets, guides, housings, holders and the like. See also REMOVER SET, STUD and INSERTER, STUD.
What is a Gear Inserter? 54 Items: A Gear Inserter (INSERTER,GEAR) is a hand tool designed to install various gears onto a gearshaft. It may be operated by a pushing or a striking force.
What is a Crimping Tool Die? 73 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is an Electrical Connector Inserter? 45 Items: An Electrical Connector Inserter (INSERTER,ELECTRICAL CONNECTOR) is a hand tool designed to hold an electrical connector, and to assist in the positioning and installation of the connector on a cover, panel or the like.
What is a Float? 12 Items: A Float is a tool used for concrete, plastering and grouting work.
What is a Mechanical Puller Set? 19 Items: A Mechanical Puller Set (PULLER SET,MECHANICAL) is two or more separate PULLER, MECHANICAL of different fixed sizes.
What is a Lifting Pneumatic Bag? 11 Items: A Lifting Pneumatic Bag (PNEUMATIC BAG,LIFTING) is a device made of flexible material designed to lift another item by being placed under the item and being inflated with air or some other gas. It will have a means of being connected to an air or gas source and may include a connector hose, a control valve and/or a pressure regulator.
What is a Cable Tie Installation Tool? 22 Items: A Cable Tie Installation Tool (INSTALLATION TOOL,CABLE TIE) is a lightweight, hand-held, hand-operated tool designed to fasten cable ties, straps and the like. Cable tie is inserted into the nose of the tool flush to the cable tie head. Trigger handle tightens cable tie and cuts off any excess. These installation tools are available in a variety of sizes depending on their intended use with miniature, intermediate, standard, heavy or extra heavy cross section ties.
What is a Bearing Staking Installation Tool? 159 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
Wrench Set,Ratchet 15 Items
What is a Sealant Dispenser? 26 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Retaining Ring Pliers Set? 10 Items: A Retaining Ring Pliers Set (PLIERS SET,RETAINING RING) is a group of PLIERS, RETAINING RING having different characteristics.
What is a Hand Armament Subsystem Carrier? 52 Items: A Hand Armament Subsystem Carrier (CARRIER,ARMAMENT SUBSYSTEM,HAND) is a metallic item with a clamp device and/or space for depositing articles. It is used for transporting weapon parts during maintanence and/or repair work, such as gun barrel, automatic loader, breechblock and the like.
What is a Ring Retaining Pliers Tip Set? 13 Items: A Ring Retaining Pliers Tip Set (TIP SET,PLIERS,RING RETAINING) is a collection of removable metallic tips in matched pairs used to provide various size capablities to PLIERS, RING RETAINING which permits the removal and installation of internal and external retaining rings.
What is a Plug Electrical Connector Extractor? 45 Items: A Plug Electrical Connector Extractor (EXTRACTOR,ELECTRICAL CONNECTOR,PLUG) is a hand tool designed to disassemble CONNECTOR, PLUG, ELECTRICAL from a CONNECTOR, RECEPTACLE, ELECTRICAL.
What is a Torque Wrench Adapter Set? 10 Items: A Torque Wrench Adapter Set (ADAPTER SET,TORQUE WRENCH) is tWO or more ADAPTER, TORQUE WRENCH of different sizes.
What is an Electronic Component Inserter And Remover? 79 Items: An Electronic Component Inserter And Remover (INSERTER AND REMOVER,ELECTRONIC COMPONENT) is an item which can insert or remove an electronic component package such as MICROCIRCUIT; RESISTOR, NETWORK (as modified); and the like from its mounting position or socket. Excludes INSERTER AND REMOVER, ELECTRICAL CONTACT; REMOVER, ELECTRICAL CONTACT; EXTRACTOR, ELECTRICAL CARD; EXTRACTOR, ELECTRONIC CRYSTAL UNIT; EXTRACTOR, ELECTRON TUBE.
What is an Impact Type Bit Set And Handle Screwdriver? 14 Items: An Impact Type Bit Set And Handle Screwdriver (SCREWDRIVER,BIT SET AND HANDLE,IMPACT TYPE) is an item consisting of a set of screwdriver bits and a impact driver to accommodate the bits of various types and characteristics. It is designed to transmit a strong rotating movement by the impact of a hammer blowed on the impact driver. It is used to loosen rusted or seized screws. Excludes SCREWDRIVER, BIT SET AND HANDLE.
What is a Hand Vise Jaw? 19 Items: A Hand Vise Jaw (JAW,VISE,HAND) is an item consisting of two opposing parts of a VISE, HAND. The item is moveable and able to open and close. It can hold, grasp or clamp work.
What is a Screwdriver Handle? 28 Items: A Screwdriver Handle (HANDLE,SCREWDRIVER) is an item used to accommodate various types of BIT, SCREWDRIVER. It is designed to rotate a bit that is used for installing or removing screws.
What is a Wire Twister Pliers? 25 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 284 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is a Mechanical Puller Body? 45 Items: A Mechanical Puller Body (BODY,PULLER,MECHANICAL) is an item designed to support and enclose the internal parts of a PULLER,MECHANICAL.
What is a Flat Tip And Cross Tip Screwdriver Set? 39 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is a Socket Wrench Screwdriver Attachment Set? 22 Items: A Socket Wrench Screwdriver Attachment Set (SCREWDRIVER ATTACHMENT SET,SOCKET WRENCH) is a set of screwdriver attachment, socket wrench of different sizes. Items consist of a female square drive on one end to attach to a handle, socket wrench and various screwdriver tip configurations on the opposite end. Excludes SCREWDRIVER ATTACHMENT,SOCKET WRENCH
What is an Oil Filter Wrench? 44 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 430 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Communications Equipment Spring Adjuster? 13 Items: A Communications Equipment Spring Adjuster (ADJUSTER,SPRING,COMMUNICATIONS EQUIPMENT) is a single or double end tool, equipped with slot(s) of various dimensions or with cylindrical rod(s), used for adjusting the springs or spring tensioned parts of electronic equipment.
What is a Rotating Members Aligning Tool? 32 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
What is a Final Drive Assembly Alignment Pin? 41 Items: A Final Drive Assembly Alignment Pin (ALIGNMENT PIN,FINAL DRIVE ASSEMBLY) is a special designed pin used in the assembling of the final drive.
Arm,Handling Tool 77 Items
What is a Splicing Sleeve Compressing Tool? 23 Items: A Splicing Sleeve Compressing Tool (COMPRESSING TOOL,SPLICING SLEEVE) is a hand tool having hinged leverage handles similar to a CUTTER, BOLT or pliers, designed to compress a splicing sleeve when joining the ends of two conductors, or when forming an eye splice in the end of a wire rope. Excludes CRIMPING TOOL, TERMINAL, HAND.
What is a Hand Screw Jack Extension? 14 Items: A Hand Screw Jack Extension (EXTENSION,HAND SCREW JACK) is a length of externally threaded rigid shafting which is the adjustable section of a JACK, SCREW, HAND.
What is a Mechanical Puller Gear Adapter? 21 Items: A Mechanical Puller Gear Adapter (GEAR ADAPTER,PULLER,MECHANICAL) is an adapter that adapts a PULLER,MECHANICAL, to pull a certain gear.
Handle,Hydraulic Jack 18 Items
What is a Female Electrical Contact Resizing Tool? 11 Items: A Female Electrical Contact Resizing Tool (RESIZING TOOL,FEMALE ELECTRICAL CONTACT) is a tool designed to shape to a specific size, female contacts such as those used on electrical connectors, tube sockets, crystal sockets, and pin jacks.
What is a Screwdriver And Socket Wrench Combination? 13 Items: A Screwdriver And Socket Wrench Combination is a hand-tool formed into an integral unit with a socket wrench at one end and a screwdriver bit at the other end. See also SCREWDRIVER AND WRENCH ASSEMBLY.
What is a Hand Hose Fitting Swaging Tool Kit? 11 Items: A Hand Hose Fitting Swaging Tool Kit (SWAGING TOOL KIT,HOSE FITTING,HAND) is a device, hydraulically actuated by hand or power operated pump, consisting of face plate, adapter plate, finger cages, fingers, ram, bushing, and expanding mandrels combined on a single base in various functional arrangements. It is used for swaging the outside diameter of hose assembly fittings, expanding the inside diameter of hose assemblies, and securing the fabrication of hose assemblies. Included are a hand or power operated pump, lubricant, cases, and trays.
What is a Catch Lever Tool? 12 Items: A Catch Lever Tool (LEVER TOOL,CATCH) is a specially designed hand tool which engages the opening and closing lever of a CATCH (as modified) for ease of operation. It is constructed of thin rigid material, usually flat, and one end has an engaging tongue.
What is a Manual Impact Wrench? 11 Items: A Manual Impact Wrench (WRENCH,IMPACT,MANUAL) is a manually operated handheld tool consisting of spring-loaded handle and a power-impact head which delivers a torsional impact from either continuous movement of the handle in one direction, or by a reciprocating action. It is used in tightening and loosening fasteners, such as bolts, nuts, and the like. The item may include sockets, extensions and offset fittings, nut runners, and the like.
What is a Drift? 63 Items: A Drift is an item consisting of a tubular body fitted with replaceable tips. It is designed to insert or remove mechanical components where space is restricted.
What is a Nutdriver? 46 Items: A Nutdriver is a non-powered hand tool with a screwdriver style handle, shaft and formed female hex or square socket at driving end.
What is a Locking Device Removal Tool? 12 Items: A Locking Device Removal Tool (REMOVAL TOOL,LOCKING DEVICE) is a hand tool designed to facilitate the removal of a WASHER, KEY and a LOCKING PLATE, NUT AND BOLT.
What is a Hydraulic Fitting Crimping Tool Head? 26 Items: A Hydraulic Fitting Crimping Tool Head (HEAD,CRIMPING TOOL,HYDRAULIC FITTING) is a component of a crimping tool used to compress fittings on fluid tubes. It consists of a U-shape item, in which, are mounted different sizes of DIE, CRIMPING TOOL for tubes of various diameters.
What is a Torque Screwdriver? 11 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.
What is a Special Purpose Combination Wrench? 13 Items: A Special Purpose Combination Wrench (WRENCH,COMBINATION,SPECIAL PURPOSE) is a tool having a combination of ends and facets. The ends may have open end, box or spanner characteristics. The sides may have features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s). Designed to fit specific items, not sized as standard or metric.
What is a Screwdriver Bit Holder? 56 Items: A Screwdriver Bit Holder (HOLDER,SCREWDRIVER BIT) is an attachment with a socket end for accepting male hexagon shank insert bits and a drive end for adapting to a portable power or hand tool.
What is a Telescoping Pole? 16 Items: A Telescoping Pole (POLE,TELESCOPING) is an item which is designed to be extended or compressed by the sliding of overlapping sections. This item may or may not be able to accommodate an extension.

Stock Items From Supply Class 5120 Page 108 of 110

5120-14-237-7654
Tournevis Bout Cruc

142377654
6892: RNCC: 3 | RNVC: 9

1 Jan 1967

5120-14-200-8597
Spanner Wrench

142008597
115: RNCC: 3 | RNVC: 2
3272670254862: RNCC: 5 | RNVC: 2
91476357: RNCC: 5 | RNVC: 2
0000330716: RNCC: 5 | RNVC: 2
0000330716: RNCC: 5 | RNVC: 9
330716: RNCC: 5 | RNVC: 9
85-692-2566: RNCC: 6 | RNVC: 9

1 Jan 1962

5120-14-301-9800
Outil Demontage Vis

143019800
M3-077-11: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-421-0790
Passe-Joint

144210790
6254-58485: RNCC: 3 | RNVC: 2

6 Jan 1988

5120-14-270-5203
Cle De Meche De Gou

142705203
0960-45-77-16412DET1: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-201-9699
Open End Wrench

142019699
31-13X15: RNCC: 3 | RNVC: 2

1 Jan 1962

5120-14-431-6167
Sertissag Outillage

144316167
6232-54657: RNCC: 3 | RNVC: 2

26 Apr 1989

5120-14-390-3193
Spanner Wrench

143903193
01-90900-004: RNCC: 3 | RNVC: 2
01-90-900-004: RNCC: 5 | RNVC: 2
85-692-4851: RNCC: 6 | RNVC: 9

26 Jan 1984

5120-14-472-7731
Retracteur D'axe

144727731
230317: RNCC: 3 | RNVC: 2
85-695-3216: RNCC: 6 | RNVC: 9

9 Nov 1994

5120-14-466-4721
Spanner Wrench

144664721
NO PRIMARY REF14-466-4721: RNCC: 3 | RNVC: 2
601655: RNCC: 5 | RNVC: 9

10 Nov 1993

5120-14-377-4201
Socket Head Screw Key

143774201
9970-121-290: RNCC: 3 | RNVC: 2
85-689-8774: RNCC: 6 | RNVC: 9

17 May 1982

5120-14-431-2685
Bearing And Bushing Remover

144312685
3160S95-68-060: RNCC: 3 | RNVC: 2

12 Apr 1989

5120-14-321-1496
Flat Tip Screwdriver

143211496
PC81: RNCC: 3 | RNVC: 2
AK8X100: RNCC: 5 | RNVC: 2
85-598-2321: RNCC: 6 | RNVC: 9

1 Jan 1975

5120-14-522-0289
Socket Wrench Socket

145220289
OCE89-82G: RNCC: 3 | RNVC: 2
0CE89-82G: RNCC: 5 | RNVC: 2

29 Sep 2000

5120-14-389-8513
Demontage Outillage

143898513
M24-004: RNCC: 3 | RNVC: 2

20 Dec 1983

5120-14-418-1434
Flat Tip Screwdriver

144181434
261M-5: RNCC: 3 | RNVC: 2
261M5: RNCC: 3 | RNVC: 2
3272670217133: RNCC: 5 | RNVC: 2

6 Aug 1987

5120-14-506-2434
Electronic Component Inserter And Remover

145062434
1350-E-25: RNCC: 3 | RNVC: 2
1350E25: RNCC: 3 | RNVC: 2
3272670348783: RNCC: 5 | RNVC: 2

15 Apr 1998

5120-14-418-1414
Flat Tip Screwdriver

144181414
272M-5: RNCC: 3 | RNVC: 2
272M5: RNCC: 3 | RNVC: 2
3272670241992: RNCC: 5 | RNVC: 2

6 Aug 1987

5120-14-328-6783
Electron Tube Pin Straightener

143286783
NO PRIMARY REF14-328-6783: RNCC: 3 | RNVC: 2
BSD: RNCC: 5 | RNVC: 9
2818-4: RNCC: 5 | RNVC: 9

2 Jul 1975

5120-14-260-3610
Bearing And Bushing Inserter And Remover

142603610
3160-95-33-125: RNCC: 3 | RNVC: 2
3160S95-33-125: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-522-7488
Poussoir De Siege

145227488
MAT171-0435F15: RNCC: 3 | RNVC: 2

20 Nov 2000

5120-14-301-9649
Socket Head Screw Key Set

143019649
NO PRIMARY REF14-301-9649: RNCC: 3 | RNVC: 2
0532800: RNCC: 5 | RNVC: 2
3148515328015: RNCC: 5 | RNVC: 2
83.JL10: RNCC: 5 | RNVC: 2
83JL10: RNCC: 5 | RNVC: 2
0186723N00: RNCC: 5 | RNVC: 2
91422689: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-212-9559
Cle A Ergots Specia

142129559
NO PRIMARY REF14-212-9559: RNCC: 3 | RNVC: 2
147843: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-481-4151
Blasting Cap Crimper

144814151
6-7000-001: RNCC: 3 | RNVC: 2

7 May 1996

5120-14-321-8503
Torque Wrench Adapter

143218503
6521772: RNCC: 3 | RNVC: 2
6521772: RNCC: 5 | RNVC: 1
85-626-7212: RNCC: 6 | RNVC: 9

1 Jan 1975

5120-14-364-2742
Spanner Wrench

143642742
0U119350: RNCC: 3 | RNVC: 2
0U119350: RNCC: 5 | RNVC: 9
85-691-3072: RNCC: 6 | RNVC: 9

7 Aug 1980

5120-14-504-7710
Flat Tip Screwdriver

145047710
ATH.12X250: RNCC: 3 | RNVC: 2
3148510116303: RNCC: 5 | RNVC: 2
ATH12X250: RNCC: 5 | RNVC: 9
ATH-12X250: RNCC: 5 | RNVC: 9

4 Mar 1998

5120-14-271-8512
Cle De Bielle

142718512
87487: RNCC: 3 | RNVC: 2
87487: RNCC: 5 | RNVC: 9

1 Jan 1970

5120-14-445-9831
Speciale Cle

144459831
8814090000: RNCC: 3 | RNVC: 2

27 Feb 1991

5120-14-370-8545
Desopercul Aiguille

143708545
1897569526: RNCC: 3 | RNVC: 2
85-691-6907: RNCC: 6 | RNVC: 9

5 Jun 1981

5120-14-040-0674
Outil De Montage

140400674
NO PRIMARY REF14-040-0674: RNCC: 3 | RNVC: 2
BL43952: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-440-5400
Face Spanner Wrench Socket

144405400
0-702257: RNCC: 3 | RNVC: 2
85-694-0297: RNCC: 6 | RNVC: 9

17 Jul 1990

5120-14-032-0950
Tas Dextraction

140320950
341A93-3106-00: RNCC: 3 | RNVC: 2

5 Jul 1980

5120-14-443-7376
Spanner Wrench

144437376
7304/018: RNCC: 3 | RNVC: 2
7304.18: RNCC: 5 | RNVC: 2
91601106: RNCC: 5 | RNVC: 2

5 Dec 1990

5120-14-288-6990
Socket Head Screw Key

142886990
D1553-4835: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-401-3427
Open End Wrench

144013427
2016-80-01: RNCC: 3 | RNVC: 2

5 Jun 1985

5120-14-349-3848
Pince Pour Manchon

143493848
9970-125-378: RNCC: 3 | RNVC: 2

22 May 1978

5120-14-427-2200
Bearing And Bushing Inserter And Remover

144272200
46MS047-03: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-347-3121
Combination Box And Open End Wrench Set

143473121
NO PRIMARY REF14-347-3121: RNCC: 3 | RNVC: 2
RT21015: RNCC: 5 | RNVC: 9

19 Jan 1978

5120-14-220-7877
Open End Wrench

142207877
71-50: RNCC: 3 | RNVC: 2
RACC50: RNCC: 5 | RNVC: 2
CS01-626: RNCC: 5 | RNVC: 2
V2-95-562: RNCC: 5 | RNVC: 2
10A50: RNCC: 5 | RNVC: 2
CS01626: RNCC: 5 | RNVC: 2
128538SD: RNCC: 5 | RNVC: 9
71-50: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-486-2381
Screw Push-Pull Jack

144862381
429665: RNCC: 3 | RNVC: 2
429665-001: RNCC: 5 | RNVC: 9

5 Mar 1997

5120-14-418-7974
Torque Wrench Adapter

144187974
M31-165: RNCC: 3 | RNVC: 2

16 Sep 1987

5120-14-239-3086
Crayon Electrique

142393086
NO PRIMARY REF14-239-3086: RNCC: 3 | RNVC: 2
2008-220V: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-261-5286
Torque Wrench Adapter

142615286
D-18: RNCC: 3 | RNVC: 2
D18: RNCC: 3 | RNVC: 2
3272670221918: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-412-5884
Torque Wrench Adapter

144125884
853-190-010-0: RNCC: 3 | RNVC: 2

15 Oct 1986

5120-14-385-9786
Spanner Wrench

143859786
0.411/60119: RNCC: 3 | RNVC: 2
0411-60119: RNCC: 5 | RNVC: 2

24 Aug 1983

5120-14-548-8246
Spanner Wrench

145488246
238-1-00-00: RNCC: 3 | RNVC: 2

15 Feb 2006

5120-14-201-2187
Socket Wrench Socket

142012187
0055760: RNCC: 3 | RNVC: 2
S.13/16L: RNCC: 5 | RNVC: 2
S13-16L: RNCC: 5 | RNVC: 2

1 Jan 1962

5120-14-487-5737
Open End Wrench

144875737
K7739-12108-1BSX1 1/8BS: RNCC: 3 | RNVC: 2
K7739-12108-7/8WX1W: RNCC: 3 | RNVC: 2
12108-1BSX1 1/8BS: RNCC: 5 | RNVC: 2
12108-7/8WX1W: RNCC: 5 | RNVC: 2

10 Apr 1997

5120-14-571-7332
Screwdriver Bit

145717332
NEV-T-40: RNCC: 3 | RNVC: 2

26 Apr 2012

5120-14-276-2888
Crochet Leve-Tole

142762888
ESS3-3-05CR0CHETLEVET0LE: RNCC: 2 | RNVC: 2

1 Jan 1971

5120-14-288-1832
Socket Wrench Extension

142881832
CS01-627: RNCC: 3 | RNVC: 2
CS01627: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-530-6030
Mechanical Puller Body

145306030
888-350-005-0: RNCC: 3 | RNVC: 2

26 Jun 2002

5120-14-237-9841
Socket Wrench Socket

142379841
K.41A: RNCC: 3 | RNVC: 2
3148510293950: RNCC: 5 | RNVC: 2
K41A: RNCC: 5 | RNVC: 2
99-250-30-041-1: RNCC: 5 | RNVC: 2
99250300411: RNCC: 5 | RNVC: 2
K41: RNCC: 5 | RNVC: 9
0029395: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-241-6290
Prolongateur Pour C

142416290
1050-95-503-00: RNCC: 3 | RNVC: 2
95-503-00: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-221-2246
Dudgeonniere A Main

142212246
NO PRIMARY REF14-221-2246: RNCC: 3 | RNVC: 2
DG61012: RNCC: 5 | RNVC: 9

1 Jan 1966

5120-14-532-8090
Open End Wrench

145328090
71-45: RNCC: 3 | RNVC: 2

17 Dec 2002

5120-14-539-9829
Socket Wrench Socket

145399829
OCE91-113E-1: RNCC: 3 | RNVC: 2

25 Feb 2004

5120-14-471-0504
Spanner Wrench

144710504
815-1-99-148: RNCC: 3 | RNVC: 2

22 Jul 1994

5120-14-232-9935
Matrice De Sertissa

142329935
48753-1: RNCC: 3 | RNVC: 2
48753: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-463-9776
Emmanchement Socle

144639776
854-500-328-0: RNCC: 3 | RNVC: 2

7 Jul 1993

5120-14-406-5692
Demontage Outil

144065692
853-201-258-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-212-9086
Support Elements Fi

142129086
9970-111-035: RNCC: 3 | RNVC: 2
9970-111-035-00: RNCC: 3 | RNVC: 2

1 Jan 1964

5120-14-426-3429
Anneau De Demontage

144263429
1G4140-12: RNCC: 3 | RNVC: 9
1G4135B-REP12: RNCC: 5 | RNVC: 9

24 Aug 1988

5120-14-316-9173
Mechanical Puller Adapter

143169173
U.51B5-15: RNCC: 3 | RNVC: 2
0762100: RNCC: 5 | RNVC: 2
EMB0UTU51-50: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-416-1377
Open End Wrench

144161377
10-22X24CM: RNCC: 3 | RNVC: 2
10-22X24C: RNCC: 5 | RNVC: 2

3 Jun 1987

5120-14-406-5684
Demontage Support

144065684
853-201-897-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-479-7060
Cross Tip Screwdriver

144797060
AZP.2X125: RNCC: 3 | RNVC: 2
W269301000044: RNCC: 5 | RNVC: 2
3148510134482: RNCC: 5 | RNVC: 2
AZP-2X125: RNCC: 5 | RNVC: 2
1092013K00: RNCC: 5 | RNVC: 2
176-0810: RNCC: 5 | RNVC: 2
0013448: RNCC: 5 | RNVC: 9
FACOMAZP.2X125: RNCC: 5 | RNVC: 9

31 Jan 1996

5120-14-468-7903
Socket Head Screw Key

144687903
66-P45: RNCC: 3 | RNVC: 2
66P45: RNCC: 3 | RNVC: 2
3272670278677: RNCC: 5 | RNVC: 2

22 Mar 1994

5120-14-401-6060
Torque Wrench Adapter

144016060
NO PRIMARY REF14-401-6060: RNCC: 3 | RNVC: 2
0U141703: RNCC: 5 | RNVC: 9
OU141703: RNCC: 5 | RNVC: 9

13 Jun 1985

5120-14-337-4001
Open End Wrench

143374001
12E10BAX10BA: RNCC: 3 | RNVC: 9
85-688-7963: RNCC: 6 | RNVC: 9

7 Oct 1976

5120-14-514-8419
Cross Tip Screwdriver

145148419
ENFD6569-4X250-6PANS: RNCC: 3 | RNVC: 2

21 Jun 1999

5120-14-348-4420
Spanner Wrench

143484420
GSM084-008F5: RNCC: 3 | RNVC: 2
GSM084-08F5: RNCC: 5 | RNVC: 2

29 Mar 1978

5120-14-297-6190
Cle Reglage Vis Cde

142976190
1-1038-02-73: RNCC: 3 | RNVC: 9
1-1038-02-73: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-406-5662
Joint Tori Emmanche

144065662
853-200-732-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-316-9374
Positionneur Joint

143169374
466-8A2P54: RNCC: 3 | RNVC: 2
466-8A2P54: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-493-7189
Outil Orientation

144937189
10491329: RNCC: 3 | RNVC: 2

14 Oct 1997

5120-14-258-2450

5120-14-280-1418

5120-14-265-6013
Cle Demonte Chapeau

142656013
GM2000000CLEHEXAG0NALE80MM: RNCC: 2 | RNVC: 2
NO PRIMARY REF14-265-6013: RNCC: 3 | RNVC: 2
GM2000000CLEHEXAG0NALE80MM: RNCC: 5 | RNVC: 9

1 Jan 1970

5120-14-427-6483
Socket Head Screw Key

144276483
NO PRIMARY REF14-427-6483: RNCC: 3 | RNVC: 2
E0949603: RNCC: 5 | RNVC: 9

27 Oct 1988

5120-14-378-5129
Cimblot

143785129
6801J32-1218-01: RNCC: 3 | RNVC: 2
6801360A32-1218-01: RNCC: 5 | RNVC: 2

11 Aug 1982

5120-14-402-6890
Socket Wrench Socket

144026890
8-0134B: RNCC: 3 | RNVC: 2
101236: RNCC: 5 | RNVC: 2

19 Jul 1985

5120-14-464-9114
Molete Mandrin

144649114
851-930-316-0: RNCC: 3 | RNVC: 2

8 Sep 1993

5120-14-425-0993
Porte Mouvements

144250993
4513: RNCC: 3 | RNVC: 2
4513: RNCC: 5 | RNVC: 2
85-693-7839: RNCC: 6 | RNVC: 9

21 Jun 1988

5120-14-473-0089
Passe-Fil Cable

144730089
MAT262-0146: RNCC: 3 | RNVC: 2

23 Nov 1994

5120-14-278-5964
Outil Dalignement

142785964
123-6-020: RNCC: 3 | RNVC: 2
1236-020: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-256-6578
Electronic Equipment Tuning Wand

142566578
NO PRIMARY REF14-256-6578: RNCC: 3 | RNVC: 2
2724-4: RNCC: 5 | RNVC: 9

1 Jan 1969

5120-14-358-3632
Flat Tip Screwdriver

143583632
704-4-5X85: RNCC: 3 | RNVC: 9
DEM704-4-5X85: RNCC: 5 | RNVC: 9

13 Aug 1979

5120-14-256-6315
Flat Tip Screwdriver Set

142566315
NO PRIMARY REF14-256-6315: RNCC: 3 | RNVC: 2
464-3: RNCC: 5 | RNVC: 9
464-3A: RNCC: 5 | RNVC: 9

1 Jan 1969

5120-14-264-0576
Flat Tip Screwdriver

142640576
E74-351-2-5X16X250RONDE: RNCC: 2 | RNVC: 2
E74-351-2-5: RNCC: 5 | RNVC: 2
E74351-2-5: RNCC: 5 | RNVC: 9

1 Jan 1970

5120-14-445-4153
Outil D'extraction

144454153
91678214: RNCC: 3 | RNVC: 9
85-694-1369: RNCC: 6 | RNVC: 9

13 Feb 1991

5120-14-484-4278
Screwdriver Bit

144844278
ETORM-110: RNCC: 3 | RNVC: 2
3148510255101: RNCC: 5 | RNVC: 2
ETOR.110: RNCC: 5 | RNVC: 2
0025510: RNCC: 5 | RNVC: 9

14 Nov 1996

5120-14-399-8682
Spanner Wrench

143998682
M334-01-86-17: RNCC: 3 | RNVC: 2
453.65041.000: RNCC: 3 | RNVC: 2

11 Apr 1985

5120-14-225-4029

5120-14-562-4654
Tire Removing Tool

145624654
NO PRIMARY REF 14-562-4654: RNCC: 3 | RNVC: 2
TY01: RNCC: 5 | RNVC: 2

28 Oct 2009

5120-14-401-6626
Tire Cable

144016626
TPU10INOX: RNCC: 3 | RNVC: 2
TPU10-320102: RNCC: 5 | RNVC: 2

13 Jun 1985

5120-14-314-6105
Outillage De Contro

143146105
60290-02-00-06C2: RNCC: 3 | RNVC: 2
60290-02-00-060C2: RNCC: 5 | RNVC: 2

1 Jan 1974

5120-14-549-1983
Wire Twister Pliers

145491983
888-437-000-1: RNCC: 3 | RNVC: 2

8 Mar 2006

5120-14-313-9204
Jeu De Pose Oeillet

143139204
NO PRIMARY REF14-313-9204: RNCC: 3 | RNVC: 2
4 1-2CERCL0JEUDEP0SE: RNCC: 5 | RNVC: 9
RECHBP4 1-2CERCL0: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-227-4618
Hand Terminal Crimping Tool

142274618
S111001134302: RNCC: 3 | RNVC: 2
59239: RNCC: 5 | RNVC: 2
59239-4: RNCC: 5 | RNVC: 2
59239-8: RNCC: 5 | RNVC: 2
91576902: RNCC: 5 | RNVC: 2
11343-02: RNCC: 5 | RNVC: 9
11343-02: RNCC: 5 | RNVC: 9

1 Jan 1966

5120-14-329-6445
Bague De Montage

143296445
MGF105-04: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-309-1962
Support De Montage

143091962
12133J: RNCC: 3 | RNVC: 2
85-686-2572: RNCC: 6 | RNVC: 9

1 Jan 1974

5120-14-293-0148

5120-14-244-8459

5120-14-248-5607
Cle A Cliquet Rever

142485607
GSM193-06REPA: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-464-9109
Maintien Empreinte

144649109
851-930-307-0: RNCC: 3 | RNVC: 2

8 Sep 1993

5120-14-530-2085
Socket Head Screw Key

145302085
83H.7/32: RNCC: 3 | RNVC: 2
3148511245217: RNCC: 5 | RNVC: 2
CAE00894: RNCC: 5 | RNVC: 2

22 May 2002

5120-14-222-6182
Socket Wrench Socket

142226182
J.11/16: RNCC: 3 | RNVC: 2
J11-16: RNCC: 3 | RNVC: 2
J-11/16: RNCC: 3 | RNVC: 2
3148510278001: RNCC: 5 | RNVC: 2
J11-16: RNCC: 5 | RNVC: 2
3272670299955: RNCC: 5 | RNVC: 2
3001S824: RNCC: 5 | RNVC: 2
91778009: RNCC: 5 | RNVC: 2
0027800: RNCC: 5 | RNVC: 9
74J11-16: RNCC: 5 | RNVC: 9

1 Jan 1966

5120-14-255-9990
Cle Pour Blocage De

142559990
NO PRIMARY REF14-255-9990: RNCC: 3 | RNVC: 2
145J125: RNCC: 5 | RNVC: 9

1 Jan 1969

5120-14-384-3371
Terminal Crimping Tool Contact Positioner

143843371
809791: RNCC: 3 | RNVC: 2
85-801-0485: RNCC: 6 | RNVC: 9

4 May 1983

5120-14-237-4762
Broche Dimmobilisat

142374762
3160-94-82-030: RNCC: 3 | RNVC: 2
3160S94-82-030: RNCC: 5 | RNVC: 2
85-100-3128: RNCC: 6 | RNVC: 9

1 Jan 1967

5120-14-206-3664
Solid Center Punch

142063664
8-60: RNCC: 3 | RNVC: 2
1604-6: RNCC: 3 | RNVC: 2
701-5: RNCC: 3 | RNVC: 2

1 Jan 1964

5120-14-249-3955
Tete-Guide Emmanche

142493955
3210-97-33-105: RNCC: 3 | RNVC: 2
08-333: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-311-4538
Bearing And Bushing Inserter And Remover

143114538
3160S95-33-007-3: RNCC: 3 | RNVC: 2
3160S95-33-007-2: RNCC: 5 | RNVC: 2

1 Jan 1974

5120-14-205-8182
Pince Pose Boutonsp

142058182
NO PRIMARY REF14-205-8182: RNCC: 3 | RNVC: 2
2020010: RNCC: 5 | RNVC: 9
PG41-4: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-459-6435
Cle Speciale

144596435
110-967-07-W26H: RNCC: 3 | RNVC: 2

10 Dec 1992

5120-14-210-7116
Affiloir De Racloir

142107116
NO PRIMARY REF14-210-7116: RNCC: 3 | RNVC: 2
6-170MM: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-501-5553
Outillage Articulat

145015553
T60UT0034007: RNCC: 3 | RNVC: 2

4 Nov 1997

5120-14-223-4990

5120-14-248-2361

5120-14-434-7875
Sheet Metalworking Stake

144347875
853-670-049-0: RNCC: 3 | RNVC: 2

4 Oct 1989

5120-14-406-5710
Face Spanner Wrench Socket

144065710
853-200-750-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-350-0279
Mechanical Puller Attachment

143500279
3130S98-03-502-1: RNCC: 3 | RNVC: 2

14 Jun 1978

5120-14-314-4052
Spanner Wrench

143144052
3511-961-28201: RNCC: 3 | RNVC: 2
3511 961 28201: RNCC: 5 | RNVC: 2
MQ12820: RNCC: 5 | RNVC: 2

1 Jan 1974

5120-14-406-5536
Entrainement Cle

144065536
853-100-177-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-404-0830
Broche Protecteur

144040830
853-201-517-0: RNCC: 3 | RNVC: 2

11 Sep 1985

5120-14-450-7494
Flat Tip Screwdriver

144507494
NO PRIMARY REF14-450-7494: RNCC: 3 | RNVC: 2
646300: RNCC: 5 | RNVC: 9
EB.5,5X30: RNCC: 5 | RNVC: 9

22 Oct 1991

5120-14-329-3596
Cle Speciale

143293596
NO PRIMARY REF14-329-3596: RNCC: 3 | RNVC: 2
986-78: RNCC: 5 | RNVC: 9

2 Jul 1975

5120-14-446-3133
Tube Guidage

144463133
HTLT406630P0001: RNCC: 3 | RNVC: 2
VTR401-2-1200: RNCC: 5 | RNVC: 2

13 Mar 1991

5120-14-239-9219
Cle Pour Demontage

142399219
NO PRIMARY REF14-239-9219: RNCC: 3 | RNVC: 2
152744-2: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-283-3898
Outil A Defreiner

142833898
9970-115-316: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-443-6309
Socle Support

144436309
NO PRIMARY REF14-443-6309: RNCC: 3 | RNVC: 2
OU127427: RNCC: 5 | RNVC: 9

30 Nov 1990

5120-14-276-6441
Socket Head Screw Key

142766441
801W3-64: RNCC: 3 | RNVC: 2
BTR1-19: RNCC: 3 | RNVC: 2
0123400: RNCC: 5 | RNVC: 2
82.3/64: RNCC: 5 | RNVC: 2
91352593: RNCC: 5 | RNVC: 2
82-3-64: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-396-7258
Electrical Card Extractor

143967258
1698-090C247: RNCC: 3 | RNVC: 2
1698-090C247: RNCC: 5 | RNVC: 2

27 Nov 1984

5120-14-341-5736
Universal Puller Kit

143415736
NO PRIMARY REF14-341-5736: RNCC: 3 | RNVC: 2
RT8419B: RNCC: 5 | RNVC: 9

16 Mar 1977

5120-14-203-1372
Grommet Inserting Punch And Die

142031372
NO PRIMARY REF14-203-1372: RNCC: 3 | RNVC: 2
JEUP0SE0EILLET13: RNCC: 5 | RNVC: 9

1 Jan 1963

5120-14-450-3788
Bearing Staking Installation Tool

144503788
NO PRIMARY REF14-450-3788: RNCC: 3 | RNVC: 2
BL54024: RNCC: 5 | RNVC: 9

1 Oct 1991

5120-14-288-6969
Butee Ressort Equil

142886969
D1553-4036: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-394-7972
Cle Specale

143947972
SD/MU6522: RNCC: 3 | RNVC: 2
2-35598: RNCC: 5 | RNVC: 2

28 Sep 1984

5120-14-224-3954
Socket Wrench Handle Bar

142243954
NO PRIMARY REF14-224-3954: RNCC: 3 | RNVC: 2
144HL423: RNCC: 5 | RNVC: 9

1 Jan 1966

5120-14-443-6312
Monte Segment

144436312
NO PRIMARY REF14-443-6312: RNCC: 3 | RNVC: 2
OU129484-3: RNCC: 5 | RNVC: 9

30 Nov 1990

5120-14-479-0344
Mechanical Puller Attachment

144790344
888-359-700-1: RNCC: 3 | RNVC: 2

6 Dec 1995

5120-14-332-3824
Face Spanner Wrench Socket

143323824
M31-023: RNCC: 3 | RNVC: 2
M31-023: RNCC: 5 | RNVC: 9

2 Jul 1975

5120-14-346-4496
Spanner Wrench

143464496
ST104M421-2A1: RNCC: 3 | RNVC: 2

12 Dec 1977

5120-14-421-7688
Speciale Cle

144217688
NO PRIMARY REF14-421-7688: RNCC: 3 | RNVC: 2
221829: RNCC: 5 | RNVC: 9

27 Jan 1988

5120-14-455-0060
Sheet Metalworking Stake

144550060
853-600-316-0: RNCC: 3 | RNVC: 2

1 May 1992

5120-14-324-1913
Piston Ring Compressor

143241913
7-010415-9: RNCC: 3 | RNVC: 2
RAB2157: RNCC: 5 | RNVC: 2
0UT3032: RNCC: 5 | RNVC: 9
7-010415-9: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-466-2610
Spanner Wrench

144662610
0XB501-705-508-08: RNCC: 3 | RNVC: 2

3 Nov 1993

5120-14-040-6321
Rode Balais

140406321
21-02-002411: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-417-4626
Liaison Douille

144174626
1824671: RNCC: 3 | RNVC: 9

8 Jul 1987

5120-14-490-9469
Tube

144909469
4280 082 000 030: RNCC: 3 | RNVC: 2
F300 0T 000 7176: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-493-0045
Cle

144930045
4065 030 000 622: RNCC: 3 | RNVC: 2
F300 0T 009 4384: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-292-7007

5120-14-247-8206

5120-14-234-5333

5120-14-276-3141
Socket Wrench Socket

142763141
K32: RNCC: 3 | RNVC: 2
C-32: RNCC: 3 | RNVC: 2
C32: RNCC: 3 | RNVC: 2
K32: RNCC: 3 | RNVC: 2
3272670257221: RNCC: 5 | RNVC: 2
DEMK32: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-465-4680
Face Spanner Wrench Socket

144654680
851-500-120-0: RNCC: 3 | RNVC: 2

30 Sep 1993

5120-14-398-1985
Montage Cone

143981985
2-9-02-304-003-401: RNCC: 3 | RNVC: 2

31 Jan 1985

5120-14-483-1214
Socket Wrench Socket

144831214
RB.5/16: RNCC: 3 | RNVC: 2
3148510533209: RNCC: 5 | RNVC: 2
0053320: RNCC: 5 | RNVC: 9
053320: RNCC: 5 | RNVC: 9

9 Aug 1996

5120-14-491-6610
Cle

144916610
NO PRIMARY REF14-491-6610: RNCC: 3 | RNVC: 2
40B95X100: RNCC: 5 | RNVC: 9
F300 0T 003 7912: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-200-5811
Fixed Open End Wrench Set

142005811
NO PRIMARY REF14-200-5811: RNCC: 3 | RNVC: 2
166-9-07LR18: RNCC: 5 | RNVC: 9

1 Jan 1962

5120-14-262-9720
Cle A Griffe

142629720
6800-2111: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-308-1029
Face Spanner Wrench Socket

143081029
9970-115-594: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-426-7303
Rallonge En Tube

144267303
B032BB7REP6-7-14: RNCC: 2 | RNVC: 2

17 Sep 1988

5120-14-265-3205
Socket Head Screw Key

142653205
23007045: RNCC: 3 | RNVC: 2
23007045-1: RNCC: 5 | RNVC: 2
31-10796HK1-1: RNCC: 5 | RNVC: 2
HK1-1: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-426-8366
Socket Head Screw Key

144268366
0408-52010: RNCC: 3 | RNVC: 2
O-408-52-010: RNCC: 3 | RNVC: 2
0-408-52-010: RNCC: 5 | RNVC: 2

23 Sep 1988

5120-14-274-5183
Hand Terminal Crimping Tool

142745183
59511-1: RNCC: 3 | RNVC: 2
59511: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-258-7766
Mandrin Dequilibrag

142587766
FH137-934: RNCC: 3 | RNVC: 2

1 Jan 1969

5120-14-217-2786
Cle Speciale

142172786
M20-009: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-230-6728
Solid Center Punch

142306728
M7-5M31-16A14: RNCC: 3 | RNVC: 2
M7-5M31-16A14: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-378-8440
De Montage Outil

143788440
UGD232-25: RNCC: 3 | RNVC: 2
UGD232-25: RNCC: 5 | RNVC: 2

11 Aug 1982

5120-14-278-5039

5120-14-232-9934
Matrice De Sertissa

142329934
48752-1: RNCC: 3 | RNVC: 2
48752: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-211-3762
Cle Decrou De Tige

142113762
D2604-40-5: RNCC: 3 | RNVC: 2

1 Jan 1964

5120-14-393-3024
Socket Head Screw Key

143933024
60-515: RNCC: 3 | RNVC: 2
3272670287815: RNCC: 5 | RNVC: 2

7 Apr 1984

5120-14-201-7058
Blacksmith's Bottom Swage

142017058
3832-12: RNCC: 3 | RNVC: 2
M0B19-12: RNCC: 3 | RNVC: 2

1 Jan 1962

5120-14-211-3761
Cle De Tete Telesco

142113761
D2604-40-4: RNCC: 3 | RNVC: 2

1 Jan 1964

5120-14-232-7885
Socket Wrench Screwdriver Attachment

142327885
RT.5/32: RNCC: 3 | RNVC: 2
3148515143205: RNCC: 5 | RNVC: 2
RT5-32: RNCC: 5 | RNVC: 2
0514320: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-257-2909
Plaque Pressurisati

142572909
FH152-911-4: RNCC: 3 | RNVC: 2
100A500349: RNCC: 3 | RNVC: 2
99-710-7739: RNCC: 6 | RNVC: 9

1 Jan 1969

5120-14-443-9417
Socket Head Screw Key

144439417
GS23 1/8: RNCC: 3 | RNVC: 2
GS100-01: RNCC: 5 | RNVC: 2

13 Dec 1990

5120-14-299-4499
Extracteur Connecte

142994499
305183-0: RNCC: 3 | RNVC: 2
305183: RNCC: 5 | RNVC: 2
3599079: RNCC: 5 | RNVC: 2
162-5723: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-376-6306
Craftsman's Tweezers

143766306
NO PRIMARY REF14-376-6306: RNCC: 3 | RNVC: 2
2821-4: RNCC: 5 | RNVC: 9

28 Apr 1982

5120-14-553-5421
Bearing Staking Installation Tool

145535421
00329826- OUT 07-03-100/4: RNCC: 3 | RNVC: 2

16 Apr 2007

5120-14-546-9017
Solid Center Punch

145469017
407-6: RNCC: 3 | RNVC: 2
121/445/2: RNCC: 5 | RNVC: 2

5 Sep 2005

5120-14-232-2177
Flat Tip Screwdriver

142322177
ARA.2,5X50: RNCC: 3 | RNVC: 2
ARA.2,5X50: RNCC: 5 | RNVC: 2
3148510104003: RNCC: 5 | RNVC: 2
ARA2,5X50: RNCC: 5 | RNVC: 2
8003C40: RNCC: 5 | RNVC: 2
0010400: RNCC: 5 | RNVC: 9
ARA2-5X40: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-458-1570
Socket Wrench Ratchet Attachment

144581570
S.373: RNCC: 3 | RNVC: 2
3148510589022: RNCC: 5 | RNVC: 2
S373: RNCC: 5 | RNVC: 2
0058902: RNCC: 5 | RNVC: 9
85-694-5224: RNCC: 6 | RNVC: 9

8 Oct 1992

5120-14-388-2321
Open End Wrench

143882321
VTR501-2-11221: RNCC: 3 | RNVC: 2

12 Oct 1983

5120-14-300-9637
Mechanical Puller Attachment

143009637
341A93-3308-22: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-422-2289
Socket Head Screw Key

144222289
0372-42-10053: RNCC: 3 | RNVC: 2

24 Feb 1988

5120-14-513-7378
Flat Tip Screwdriver

145137378
ENFD6560-0-8X4X125: RNCC: 3 | RNVC: 2

9 Apr 1999

5120-14-406-6187
Joints Emmanche

144066187
853-200-785-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-201-5420
Open End Wrench

142015420
31 11-16X3-4: RNCC: 3 | RNVC: 2

1 Jan 1962

5120-14-547-9465
Electrical Contact Remover

145479465
010UT512-1EE0-22: RNCC: 1 | RNVC: 2
00111212025: RNCC: 3 | RNVC: 1
057-0609-60: RNCC: 3 | RNVC: 1
8660-160: RNCC: 3 | RNVC: 2
91066-1: RNCC: 3 | RNVC: 2
282885: RNCC: 3 | RNVC: 2

29 Nov 2005

5120-14-324-2769
Hand Terminal Crimping Tool

143242769
15500-12-7: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-243-3190
Rallonge Articulee

142433190
M16-004: RNCC: 3 | RNVC: 2
M16-004: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-372-1515
Socket Head Screw Key

143721515
NO PRIMARY REF14-372-1515: RNCC: 3 | RNVC: 2
3148511266342: RNCC: 5 | RNVC: 2
88 5-32: RNCC: 5 | RNVC: 2
88.5/32: RNCC: 5 | RNVC: 2
0126634: RNCC: 5 | RNVC: 9

1 Sep 1981

5120-14-231-7336
Poincon Pour Connec

142317336
8459-132N3A: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-321-3322
Tuyauter Ecouvillon

143213322
3130S78-15-750: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-569-1986
Spanner Wrench

145691986
260818828-00: RNCC: 3 | RNVC: 2

22 Aug 2011

5120-14-520-4806
Face Spanner Wrench Socket

145204806
Z0104-933: RNCC: 3 | RNVC: 2
0104933: RNCC: 5 | RNVC: 2

17 May 2000

5120-14-321-9554
Cle A Panier

143219554
GSM196-010F30: RNCC: 3 | RNVC: 2
GSM196-10F30: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-313-4550
Open End Wrench

143134550
ECHC251-3-4REP9: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-239-6354

5120-14-296-5479

5120-14-285-6417

5120-14-321-9552
Cle A Panier

143219552
GSM196-010F28: RNCC: 3 | RNVC: 2
GSM196-10F28: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-317-1757
Open End Wrench

143171757
10-26X27-P: RNCC: 3 | RNVC: 2
44-26X27: RNCC: 5 | RNVC: 2
3272670273580: RNCC: 5 | RNVC: 2
10-26X27C: RNCC: 5 | RNVC: 9
10-26X27CP: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-265-0882
Obus Demmanchement

142650882
330A93-2012-00: RNCC: 3 | RNVC: 2
330A93-2012-0000: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-455-0041
A Mater Outil

144550041
851-200-242-0: RNCC: 3 | RNVC: 2

1 May 1992

5120-14-272-3752
Open End Wrench

142723752
E74302R36-38BAW: RNCC: 2 | RNVC: 1

1 Jan 1971

5120-14-329-8844
Electrical Card Extractor

143298844
3511 130 88911: RNCC: 3 | RNVC: 2
3511-130-88911: RNCC: 5 | RNVC: 2

2 Jul 1975

5120-14-574-6241
Open End Wrench

145746241
FR-93600-10/11: RNCC: 3 | RNVC: 2

7 Feb 2013

5120-14-459-6478
Cle Speciale

144596478
312-00007-401-W26H: RNCC: 3 | RNVC: 2

10 Dec 1992

5120-14-440-5416
Mechanical Puller Attachment

144405416
0-30878-1-1: RNCC: 3 | RNVC: 2
85-694-0293: RNCC: 6 | RNVC: 9

17 Jul 1990

5120-14-334-0705
Socket Wrench Screwdriver Attachment

143340705
NO PRIMARY REF14-334-0705: RNCC: 3 | RNVC: 2
0023950: RNCC: 5 | RNVC: 9
ENT.305/8: RNCC: 5 | RNVC: 9
ENT305/8: RNCC: 5 | RNVC: 9
ET5-8: RNCC: 5 | RNVC: 9
85-688-7869: RNCC: 6 | RNVC: 9

23 Apr 1976

5120-14-276-3113
Socket Wrench Socket

142763113
S8: RNCC: 3 | RNVC: 2
65L8-12PANS: RNCC: 3 | RNVC: 2
S8: RNCC: 3 | RNVC: 2
S-8: RNCC: 3 | RNVC: 2
S8: RNCC: 3 | RNVC: 9
3148510535005: RNCC: 5 | RNVC: 2
3272670235373: RNCC: 5 | RNVC: 2
DEMS8: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-296-2612
Cle Voyant Dhuile

142962612
007-24-01M1: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-514-3591
Tire Bourre

145143591
NO PRIMARY REF14-514-3591: RNCC: 3 | RNVC: 2
41T3303-14-7/16: RNCC: 5 | RNVC: 2
NNP5120860757258: RNCC: 5 | RNVC: 2
41T3303-14-7/16: RNCC: 5 | RNVC: 9

12 May 1999

5120-14-416-3285
Open End Wrench

144163285
45.80: RNCC: 3 | RNVC: 2
3148511054604: RNCC: 5 | RNVC: 2
45-80: RNCC: 5 | RNVC: 2
0105460: RNCC: 5 | RNVC: 9

3 Jun 1987

5120-14-296-9060
Cle Speciale

142969060
39-217-81: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-449-9238
Spanner Wrench

144499238
7062RUF1-1-DN40-ACIER304L: RNCC: 3 | RNVC: 9

16 Sep 1991

5120-14-556-8800
Hand Armament Subsystem Carrier

145568800
498956: RNCC: 3 | RNVC: 2

17 Apr 2008

5120-14-365-0182
Socket Wrench Socket

143650182
S.5/8H: RNCC: 3 | RNVC: 2
3148510549002: RNCC: 5 | RNVC: 2
S5-8H: RNCC: 5 | RNVC: 2
0715 13 37: RNCC: 5 | RNVC: 2
0054900: RNCC: 5 | RNVC: 9

2 Sep 1980

5120-14-321-1523
Open End Wrench

143211523
13 1-2X9-16: RNCC: 3 | RNVC: 2
13-1/2X9/16: RNCC: 3 | RNVC: 2
522 1-2X9-16: RNCC: 3 | RNVC: 9
3272670337251: RNCC: 5 | RNVC: 2
DEM522 1-2X9-16: RNCC: 5 | RNVC: 9
85-638-6880: RNCC: 6 | RNVC: 9
85-686-0613: RNCC: 6 | RNVC: 9

1 Jan 1975

5120-14-321-8508
Spanner Wrench

143218508
6521767: RNCC: 3 | RNVC: 2
6521767: RNCC: 5 | RNVC: 1
85-626-7182: RNCC: 6 | RNVC: 9

1 Jan 1975

5120-14-328-5186
Cle De Roue

143285186
NO PRIMARY REF14-328-5186: RNCC: 3 | RNVC: 2
324417: RNCC: 5 | RNVC: 9

2 Jul 1975

5120-14-317-0558
Vis Verin A Vis

143170558
160-888427-02: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-416-7454
Maintien Outil

144167454
530729: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-217-9932
Torque Wrench Adapter

142179932
D0.9: RNCC: 3 | RNVC: 2
D09: RNCC: 3 | RNVC: 2
0044627T00: RNCC: 5 | RNVC: 2
1110726F00: RNCC: 5 | RNVC: 2
3272670272484: RNCC: 5 | RNVC: 2
D0-9: RNCC: 5 | RNVC: 2

1 Jan 1965

5120-14-212-8522
Open End Wrench

142128522
E74-301-55: RNCC: 2 | RNVC: 2
69-55: RNCC: 3 | RNVC: 2
512-55: RNCC: 3 | RNVC: 9
3272670212480: RNCC: 5 | RNVC: 2
DEM512-55: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-276-3167
Socket Wrench Socket

142763167
K.1'7/16A: RNCC: 3 | RNVC: 2
C-1'7/16: RNCC: 3 | RNVC: 2
C1 7-16: RNCC: 3 | RNVC: 2
K1 7-16: RNCC: 3 | RNVC: 9
3148510297859: RNCC: 5 | RNVC: 2
3272670234079: RNCC: 5 | RNVC: 2
0029785: RNCC: 5 | RNVC: 9
K1 7-16: RNCC: 5 | RNVC: 9
78C1 7-16: RNCC: 5 | RNVC: 9
DEMK1 7-16: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-416-8083
Electrical Contact Remover

144168083
SDEM5-0060: RNCC: 3 | RNVC: 2
S/DEM/1-0060: RNCC: 5 | RNVC: 2
SDEM1-0060: RNCC: 5 | RNVC: 2
91581132: RNCC: 5 | RNVC: 2

25 Jun 1987

5120-14-325-3880
Rodoir De Robinet

143253880
NO PRIMARY REF14-325-3880: RNCC: 3 | RNVC: 2
PT761REP50: RNCC: 5 | RNVC: 9

2 Jul 1975

5120-14-300-6919
Spanner Wrench

143006919
NO PRIMARY REF14-300-6919: RNCC: 3 | RNVC: 2
C6099ET3: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-364-2748
Douille Demmancheme

143642748
D1041: RNCC: 3 | RNVC: 2
D1041: RNCC: 3 | RNVC: 2
85-691-3073: RNCC: 6 | RNVC: 9

7 Aug 1980

5120-14-399-3357
Torque Wrench Adapter

143993357
MHC228-27: RNCC: 3 | RNVC: 2

6 Mar 1985

5120-14-527-8168
Socket Head Screw Key

145278168
888-498-500-1: RNCC: 3 | RNVC: 2

21 Nov 2001

5120-14-400-9214
Jeux Empe Outillage

144009214
50AM001: RNCC: 3 | RNVC: 2

21 May 1985

5120-14-316-6651

5120-14-246-3253
Open End Wrench

142463253
69-14: RNCC: 3 | RNVC: 2
4062-14: RNCC: 3 | RNVC: 9
E74301C14AGW: RNCC: 5 | RNVC: 2
R61302ANW: RNCC: 5 | RNVC: 2
3272670224247: RNCC: 5 | RNVC: 2
0C6114: RNCC: 5 | RNVC: 2
69-14CA: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-404-1062
Torque Wrench Adapter

144041062
853-100-167-0: RNCC: 3 | RNVC: 2

11 Sep 1985

5120-14-222-7389
Open End Wrench

142227389
20S11X10: RNCC: 3 | RNVC: 2
19-11X10: RNCC: 5 | RNVC: 9

1 Jan 1966

5120-14-243-1133
Cle A Lame Equipee

142431133
NO PRIMARY REF14-243-1133: RNCC: 3 | RNVC: 2
40859: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-226-2141
Socket Wrench Handle

142262141
M140: RNCC: 3 | RNVC: 2
R.140: RNCC: 3 | RNVC: 2
V2-95-004: RNCC: 5 | RNVC: 2
3148510519500: RNCC: 5 | RNVC: 2
R140: RNCC: 5 | RNVC: 2
1069679X00: RNCC: 5 | RNVC: 2
072881001: RNCC: 5 | RNVC: 2
0051950: RNCC: 5 | RNVC: 9

1 Jan 1966

5120-14-213-7916
Outil De Verrouilla

142137916
80900-30: RNCC: 3 | RNVC: 2
77188: RNCC: 5 | RNVC: 2

1 Jan 1964

5120-14-485-2747
Mechanical Puller Attachment

144852747
202165-203: RNCC: 3 | RNVC: 9
91604616: RNCC: 5 | RNVC: 2
MUL202165-203: RNCC: 5 | RNVC: 9

15 Jan 1997

5120-14-222-1637
Emmanche Capot

142221637
9970-111-100: RNCC: 3 | RNVC: 2
9970-111-100-00: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-350-0135
Spanner Wrench

143500135
Y075-016-000: RNCC: 3 | RNVC: 2
Y075-016: RNCC: 5 | RNVC: 2

14 Jun 1978

5120-14-245-3274
Hand Tube Flaring Tool

142453274
8459-132-3A: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-329-6367
Montage Ressort

143296367
MGC103-21: RNCC: 3 | RNVC: 2
MGC103-21: RNCC: 5 | RNVC: 2

2 Jul 1975

5120-14-336-1673
Cle Hexagonale Spec

143361673
A00840-02S010: RNCC: 3 | RNVC: 2

24 Jul 1976

5120-14-229-5405
Doigt En Bronze Dal

142295405
4320852: RNCC: 3 | RNVC: 2
4320852: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-257-5994

5120-14-456-7194
Dessertissage Ce

144567194
853-600-331-0: RNCC: 3 | RNVC: 2

24 Jul 1992

5120-14-465-6517
Maintien Empreinte

144656517
851-500-534-0: RNCC: 3 | RNVC: 2

6 Oct 1993

5120-14-312-2535
Socket Wrench Adapter

143122535
160-71960-27: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-387-1190
Open End Wrench

143871190
NBT307351P0014: RNCC: 3 | RNVC: 2
VTR321-2-11195: RNCC: 5 | RNVC: 2

24 Aug 1983

5120-14-442-5369
Spanner Wrench

144425369
D1553-4809-1-3: RNCC: 3 | RNVC: 2
D1553-4809-1-3: RNCC: 5 | RNVC: 9

17 Oct 1990

5120-14-292-0792
Outillage Lignage P

142920792
NO PRIMARY REF14-292-0792: RNCC: 3 | RNVC: 2
BG72: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-321-1529
Open End Wrench

143211529
NO PRIMARY REF14-321-1529: RNCC: 3 | RNVC: 2
13 5-8X11-16: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-435-7224
Socket Wrench Socket

144357224
J.1/2H: RNCC: 3 | RNVC: 2
00.46.15.56: RNCC: 5 | RNVC: 2
3148510279589: RNCC: 5 | RNVC: 2
0027958: RNCC: 5 | RNVC: 9

21 Nov 1989

5120-14-514-3863
Screwdriver Bit

145143863
ENFD6526AC0-8X5-5: RNCC: 3 | RNVC: 2

19 May 1999

5120-14-215-9608
Cle Plate

142159608
773-411-003F3 67X5X63X5: RNCC: 3 | RNVC: 2
773-411-003F3 67X5X63X5: RNCC: 5 | RNVC: 9
773-411-003FF3-67X5X63X5: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-352-3187
Face Spanner Wrench Socket

143523187
MHJ170-01: RNCC: 3 | RNVC: 2
MHJ170-01: RNCC: 5 | RNVC: 2

16 Oct 1978

5120-14-389-8512
Demontage Outillage

143898512
M16-034A: RNCC: 3 | RNVC: 2

20 Dec 1983

5120-14-427-2271
Bearing And Bushing Inserter And Remover

144272271
46MS047-42: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-322-7447
Spanner Wrench

143227447
73101-01-30-02BREP14: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-379-0307
Spanner Wrench

143790307
6814-58549: RNCC: 3 | RNVC: 2
681458549: RNCC: 5 | RNVC: 9

6 Sep 1982

5120-14-349-8658
Spanner Wrench

143498658
0427-02002: RNCC: 3 | RNVC: 2

14 Jun 1978

5120-14-411-8732
Wrench Extension Handle

144118732
54.M4B: RNCC: 3 | RNVC: 2
109-R4: RNCC: 3 | RNVC: 2
109R4: RNCC: 3 | RNVC: 2
0110585: RNCC: 5 | RNVC: 1
3148511105856: RNCC: 5 | RNVC: 2
3272670289659: RNCC: 5 | RNVC: 2
54M4A: RNCC: 5 | RNVC: 9

10 Sep 1986

5120-14-416-1376
Open End Wrench

144161376
10-17X19CM: RNCC: 3 | RNVC: 2
10-17X19C: RNCC: 5 | RNVC: 2

3 Jun 1987

5120-14-287-1207
Screwdriver Bit

142871207
NO PRIMARY REF14-287-1207: RNCC: 3 | RNVC: 2
0023969: RNCC: 5 | RNVC: 2
ENT.319: RNCC: 5 | RNVC: 2
ET19: RNCC: 5 | RNVC: 2
3272670288027: RNCC: 5 | RNVC: 2
SE-19: RNCC: 5 | RNVC: 2
SE19: RNCC: 5 | RNVC: 2
91481369: RNCC: 5 | RNVC: 2
91630250: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-358-4677
Socket Head Screw Key

143584677
0124390: RNCC: 3 | RNVC: 2
83 3-64: RNCC: 5 | RNVC: 2
83.3/64: RNCC: 5 | RNVC: 2

13 Aug 1979

5120-14-261-5291
Torque Wrench Adapter

142615291
99250450241: RNCC: 3 | RNVC: 2
D-24: RNCC: 3 | RNVC: 2
99-250-45-024-1: RNCC: 5 | RNVC: 2
GESM827540: RNCC: 5 | RNVC: 2
3272670303225: RNCC: 5 | RNVC: 2
D24: RNCC: 5 | RNVC: 2
D24: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-479-7059
Flat Tip Screwdriver

144797059
AZ.5,5X100: RNCC: 3 | RNVC: 2
213/172/1: RNCC: 5 | RNVC: 2
3148510133898: RNCC: 5 | RNVC: 2
AZ-5,5X100: RNCC: 5 | RNVC: 2
1092101A00: RNCC: 5 | RNVC: 2
250-5692: RNCC: 5 | RNVC: 2
0013389: RNCC: 5 | RNVC: 9
FACOMAZ.5,5X100: RNCC: 5 | RNVC: 9

31 Jan 1996

5120-14-373-8865
Retaining Ring Pliers

143738865
NO PRIMARY REF14-373-8865: RNCC: 3 | RNVC: 2
43C: RNCC: 5 | RNVC: 2

8 Dec 1981

5120-14-431-4814
Socket Head Screw Key

144314814
0372-42-10009: RNCC: 3 | RNVC: 2

19 Apr 1989

5120-14-448-1611
Socket Wrench Socket

144481611
MHJ071-21: RNCC: 3 | RNVC: 2
MH071-21-00: RNCC: 5 | RNVC: 2
MH071-21-00: RNCC: 5 | RNVC: 2

12 Jun 1991

5120-14-559-9053
Torque Wrench

145599053
S.208-100: RNCC: 3 | RNVC: 2
3148516933539: RNCC: 5 | RNVC: 2

4 Mar 2009

5120-14-468-5884
Face Spanner Wrench Socket

144685884
65-2-01B ACP20 0 626500: RNCC: 3 | RNVC: 2
65-2-01B ACP20 0 626500: RNCC: 5 | RNVC: 9

9 Mar 1994

5120-14-476-3270
Socket Wrench Socket

144763270
S.22LA: RNCC: 3 | RNVC: 2
3148510554051: RNCC: 5 | RNVC: 2
8031875F00: RNCC: 5 | RNVC: 2
235-4315: RNCC: 5 | RNVC: 2
0055405: RNCC: 5 | RNVC: 9
FACOMS.22LA: RNCC: 5 | RNVC: 9

7 Jun 1995

5120-14-327-8704
Hole Sheet Metal Holder

143278704
CB6-3: RNCC: 3 | RNVC: 2
CB6-3: RNCC: 3 | RNVC: 2
851-910-096-0: RNCC: 5 | RNVC: 2
MO-5551/2: RNCC: 5 | RNVC: 2
CB6-3: RNCC: 5 | RNVC: 9
MM6-3: RNCC: 5 | RNVC: 9
85-676-6500: RNCC: 6 | RNVC: 9

2 Jul 1975

5120-14-385-9796
Spanner Wrench

143859796
0.411/60147: RNCC: 3 | RNVC: 2
0411-60147: RNCC: 5 | RNVC: 2

24 Aug 1983

5120-14-384-8842
Flat Tip Screwdriver

143848842
9970-125-778: RNCC: 3 | RNVC: 2

2 Jun 1983

5120-14-224-9916
Open End Wrench

142249916
71-60: RNCC: 3 | RNVC: 2
170323: RNCC: 5 | RNVC: 2
10A60: RNCC: 5 | RNVC: 2

1 Jan 1966

5120-14-427-2499
Spanner Wrench

144272499
488402M84-06PN4: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-286-0159
Torque Wrench Adapter

142860159
DC-0-1/4: RNCC: 3 | RNVC: 2
3272670298743: RNCC: 5 | RNVC: 2
DC0-1-4: RNCC: 5 | RNVC: 2
RT21348: RNCC: 5 | RNVC: 2
DC0-1-4: RNCC: 5 | RNVC: 2
0C01-4: RNCC: 5 | RNVC: 9
85-600-8971: RNCC: 6 | RNVC: 9

1 Jan 1972

5120-14-204-3018
Cle Speciale

142043018
M6-034: RNCC: 3 | RNVC: 2
M6-034: RNCC: 5 | RNVC: 9

1 Jan 1963

5120-14-577-6061
Screw Push-Pull Jack

145776061
82736761000: RNCC: 3 | RNVC: 1

26 Sep 2013

5120-14-561-1773
Combination Box And Open End Wrench Set

145611773
440.JE11: RNCC: 3 | RNVC: 2
3148518003070: RNCC: 5 | RNVC: 2
800307: RNCC: 5 | RNVC: 2

23 Jun 2009

5120-14-245-1826

5120-14-513-9716
Flat Tip Screwdriver

145139716
ENFD6560-2-5X14X300: RNCC: 3 | RNVC: 2

21 Apr 1999

5120-14-329-6362
Support Detau

143296362
MFG228-21: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-343-9650
Open End Wrench

143439650
13 9-32X5-16: RNCC: 3 | RNVC: 2
13 9-32X5-16: RNCC: 3 | RNVC: 2
85-686-0335: RNCC: 6 | RNVC: 9

13 Jul 1977

5120-14-559-5693
Hand Hammer

145595693
205H.80: RNCC: 3 | RNVC: 2
205.F80: RNCC: 3 | RNVC: 9
DIN1041-0,960KG-FACOM-205.F80: RNCC: 5 | RNVC: 2
3148517523685: RNCC: 5 | RNVC: 2
752368: RNCC: 5 | RNVC: 2

27 Jan 2009

5120-14-423-2180
Basculeur Cle Dyn

144232180
0747104: RNCC: 3 | RNVC: 2
SP.1733 D-3-760: RNCC: 5 | RNVC: 2
SP1733D-3-760: RNCC: 5 | RNVC: 2

13 Apr 1988

5120-14-369-5791
Spanner Wrench

143695791
0333-78: RNCC: 3 | RNVC: 2
85-691-1423: RNCC: 6 | RNVC: 9

17 Apr 1981

5120-14-205-5707
Spanner Wrench

142055707
253-5M21A7: RNCC: 3 | RNVC: 9
PA253-5M21A7: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-338-4803
Cone De Montage

143384803
S16-0607-1260: RNCC: 3 | RNVC: 2

6 Nov 1976

5120-14-201-5532
Poincon A Chev Lame

142015532
NO PRIMARY REF14-201-5532: RNCC: 3 | RNVC: 2
108-5: RNCC: 5 | RNVC: 9

1 Jan 1962

5120-14-450-7495
Flat Tip Screwdriver

144507495
NO PRIMARY REF14-450-7495: RNCC: 3 | RNVC: 2
646350: RNCC: 5 | RNVC: 9
EB.6,5X30: RNCC: 5 | RNVC: 9

22 Oct 1991

5120-14-427-0736
Flat Tip Screwdriver

144270736
NO PRIMARY REF14-427-0736: RNCC: 3 | RNVC: 2
0011500: RNCC: 5 | RNVC: 2
ATH.5-5X75: RNCC: 5 | RNVC: 2
ATH5-5X75: RNCC: 5 | RNVC: 2
0115297F00: RNCC: 5 | RNVC: 2

6 Oct 1988

5120-14-246-3982
Hand Terminal Crimping Tool

142463982
8465: RNCC: 3 | RNVC: 2
11800: RNCC: 3 | RNVC: 2
MS3191A: RNCC: 3 | RNVC: 2
31-09-11800: RNCC: 5 | RNVC: 2
MS3191-1: RNCC: 5 | RNVC: 2
5000918888: RNCC: 5 | RNVC: 2
91366242: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-334-8131
Socket Head Screw Key

143348131
0124020: RNCC: 3 | RNVC: 2
63-2,5: RNCC: 3 | RNVC: 2
63-2-5: RNCC: 3 | RNVC: 2
83-2-5: RNCC: 5 | RNVC: 2
83.2,5: RNCC: 5 | RNVC: 2
3272670279865: RNCC: 5 | RNVC: 2

2 Jun 1976

5120-14-520-8310
Spanner Wrench

145208310
853-190-040-0: RNCC: 3 | RNVC: 2

14 Jun 2000

5120-14-391-5740
Affutage Montage

143915740
NO PRIMARY REF14-391-5740: RNCC: 3 | RNVC: 2
BL45009: RNCC: 5 | RNVC: 9

21 Mar 1984

5120-14-561-6849
Pin Remover

145616849
888-434-100-1: RNCC: 3 | RNVC: 2

20 Aug 2009

5120-14-242-2852
Hand Contact Burnisher

142422852
S270146: RNCC: 3 | RNVC: 2
270-146: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-529-4319
Sheet Metalworking Dolly Block

145294319
6501EAV000-0001: RNCC: 3 | RNVC: 2

29 Mar 2002

5120-14-423-2343
Basculeur Cle Dyn

144232343
SP2086D-3-520: RNCC: 3 | RNVC: 2

14 Apr 1988

5120-14-247-2037
Broche

142472037
C55422: RNCC: 3 | RNVC: 2
100862: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-406-6558
Emmanchement Outil

144066558
853-200-819-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-454-9421
Flat Tip Screwdriver

144549421
AEF.2X75: RNCC: 3 | RNVC: 2
AEF2X75: RNCC: 3 | RNVC: 2
AEF.2X75: RNCC: 5 | RNVC: 2
F.2X75: RNCC: 5 | RNVC: 2
3148510048888: RNCC: 5 | RNVC: 2
104-4130: RNCC: 5 | RNVC: 2
004888: RNCC: 5 | RNVC: 9
FACOMAEF2X75: RNCC: 5 | RNVC: 9

29 Apr 1992

5120-14-404-0827
Rotating Members Aligning Tool

144040827
853-201-438-0: RNCC: 3 | RNVC: 2

11 Sep 1985

5120-14-327-2329
Socket Head Screw Key

143272329
639533-604: RNCC: 3 | RNVC: 2
639533-604: RNCC: 5 | RNVC: 9
85-643-6592: RNCC: 6 | RNVC: 9

2 Jul 1975

5120-14-326-8191
Forceps Demontage

143268191
010-137-000: RNCC: 3 | RNVC: 2
10-137-000: RNCC: 5 | RNVC: 2

2 Jul 1975

5120-14-308-5349
Cle Tape Ionisation

143085349
301C0-0004REP9: RNCC: 3 | RNVC: 2
301C0-004REP9: RNCC: 5 | RNVC: 2

1 Jan 1974

5120-14-391-8652
Essai Support

143918652
MFG375-21: RNCC: 3 | RNVC: 2

21 Mar 1984

5120-14-330-8146
Cle De Demontage

143308146
NO PRIMARY REF14-330-8146: RNCC: 3 | RNVC: 2
1546A36: RNCC: 5 | RNVC: 9

2 Jul 1975

5120-14-205-5695
Spanner Wrench

142055695
J05403-04-0800P033: RNCC: 3 | RNVC: 2
253-5M152A1P1: RNCC: 3 | RNVC: 9
PA253-5M152A1P1: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-309-9829
Spanner Wrench

143099829
C46019: RNCC: 3 | RNVC: 2
85-686-2566: RNCC: 6 | RNVC: 9

1 Jan 1974

5120-14-253-8742
Extracteur De Roule

142538742
NO PRIMARY REF14-253-8742: RNCC: 3 | RNVC: 2
21C8078: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-225-4014
Cle Speciale Manome

142254014
STI285-15A: RNCC: 3 | RNVC: 2
20837: RNCC: 5 | RNVC: 2
285-15A: RNCC: 5 | RNVC: 9

1 Jan 1966

5120-14-281-8241
Tire Repair Valve Holding Tool

142818241
PR1-46468M1: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-427-6512
Socket Head Screw Key

144276512
NO PRIMARY REF14-427-6512: RNCC: 3 | RNVC: 2
E0949645: RNCC: 5 | RNVC: 9

27 Oct 1988

5120-14-464-9029
Socket Wrench Socket

144649029
851-912-032-0: RNCC: 3 | RNVC: 2

8 Sep 1993

5120-14-222-1635
Cle A Ergots Specia

142221635
9970-115-289: RNCC: 3 | RNVC: 2
9970-115-289-00: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-451-4520
Metallique Poincon

144514520
851-913-195-0: RNCC: 3 | RNVC: 2

21 Nov 1991

5120-14-253-4564
Pompe Hydraulique

142534564
321-97-0002: RNCC: 3 | RNVC: 2
321A97-0002-00: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-304-3134
Bague De Retreint

143043134
S16-0606-1530: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-420-8201
Open End Wrench

144208201
10A-38: RNCC: 3 | RNVC: 2
10A38: RNCC: 5 | RNVC: 2

16 Dec 1987

5120-14-294-3669
Cle De Reglage

142943669
NO PRIMARY REF14-294-3669: RNCC: 3 | RNVC: 2
34-24-04-448: RNCC: 5 | RNVC: 9
34-24-02-448: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-514-8414
Cross Tip Screwdriver

145148414
ENFD6569-2X250: RNCC: 3 | RNVC: 2

21 Jun 1999

5120-14-514-8395
Cross Tip Screwdriver

145148395
ENFD6568-3X175-6PANS: RNCC: 3 | RNVC: 2

21 Jun 1999

5120-14-256-5825
Open End Wrench

142565825
E74302C21-23AGW: RNCC: 2 | RNVC: 2

1 Jan 1969

5120-14-362-7875
Spanner Wrench

143627875
233200-78: RNCC: 3 | RNVC: 2
TF10A32405: RNCC: 5 | RNVC: 2
85-688-4602: RNCC: 6 | RNVC: 9

19 Mar 1980

5120-14-412-7744
Support De Collage

144127744
NO PRIMARY REF14-412-7744: RNCC: 3 | RNVC: 2
H140AMV203M: RNCC: 5 | RNVC: 9

5 Nov 1986

5120-14-393-8819
Monte-Jonc Outil

143938819
NO PRIMARY REF14-393-8819: RNCC: 3 | RNVC: 2
OU138877: RNCC: 5 | RNVC: 9

21 Feb 1996

5120-14-249-3723
Leve-Soupape Specia

142493723
NO PRIMARY REF14-249-3723: RNCC: 3 | RNVC: 2
MA2370: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-321-1531
Open End Wrench

143211531
NO PRIMARY REF14-321-1531: RNCC: 3 | RNVC: 2
13 7-16X9-16: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-568-8332
Seal Inserter

145688332
888-566-800-1: RNCC: 3 | RNVC: 2

8 Jul 2011

5120-14-486-5517
Hand Hydraulic Jack Kit

144865517
3286001-00: RNCC: 3 | RNVC: 2

21 Mar 1997

5120-14-469-0388
Craftsman's Tweezers

144690388
365-C3: RNCC: 3 | RNVC: 2
365C3: RNCC: 3 | RNVC: 2
3272670348271: RNCC: 5 | RNVC: 2

5 Apr 1994

5120-14-334-8099
Socket Wrench Extension

143348099
NV210: RNCC: 3 | RNVC: 2

2 Jun 1976

5120-14-427-2140
Cle Corps

144272140
46AM037-00-0001: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-352-3148
Support Detau

143523148
MFG358-21: RNCC: 3 | RNVC: 2
MFG358-21: RNCC: 5 | RNVC: 2

16 Oct 1978

5120-14-245-2076
Pince A Sertir Conn

142452076
15500-12: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-405-3052
Spanner Wrench

144053052
12-520-106: RNCC: 3 | RNVC: 9

27 Nov 1985

5120-14-406-6515
Bronze Jet

144066515
853-201-950-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-360-5094
E Outillage Blocage

143605094
NO PRIMARY REF14-360-5094: RNCC: 3 | RNVC: 2
600009-78: RNCC: 5 | RNVC: 9

23 Nov 1979

5120-14-371-5324
Poincon Pour Verin

143715324
2074HHC20: RNCC: 3 | RNVC: 2

5 Aug 1981

5120-14-300-9650
Mechanical Puller Attachment

143009650
341A93-3505-22: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-427-0740
Screwdriver Bit

144270740
NO PRIMARY REF14-427-0740: RNCC: 3 | RNVC: 2
0025041: RNCC: 5 | RNVC: 2
ET110: RNCC: 5 | RNVC: 2
ET.110: RNCC: 5 | RNVC: 2

6 Oct 1988

5120-14-248-5660
Cle De Trente Deux

142485660
GSM196-021REP5: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-309-7462
Bearing And Bushing Inserter

143097462
341A98-2032-00: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-392-0509
Compressi Outillage

143920509
MGC440-21: RNCC: 3 | RNVC: 2

21 Mar 1984

5120-14-464-9030
Socket Wrench Socket

144649030
851-912-035-0: RNCC: 3 | RNVC: 2

8 Sep 1993

5120-14-488-5361
Torque Wrench Adapter

144885361
D-230: RNCC: 3 | RNVC: 2
3272670263451: RNCC: 5 | RNVC: 2
D230: RNCC: 5 | RNVC: 2

16 May 1997

5120-14-424-5665
Socket Wrench Socket

144245665
J.15/16: RNCC: 3 | RNVC: 2
3148510278650: RNCC: 5 | RNVC: 2
J-15/16: RNCC: 5 | RNVC: 2
J15/16: RNCC: 5 | RNVC: 2
CAE00913: RNCC: 5 | RNVC: 2
0027865: RNCC: 5 | RNVC: 9

31 May 1988

5120-14-276-3134
Socket Wrench Socket

142763134
K22: RNCC: 3 | RNVC: 2
C-22: RNCC: 3 | RNVC: 2
C22: RNCC: 3 | RNVC: 2
K22: RNCC: 3 | RNVC: 9
3272670293649: RNCC: 5 | RNVC: 2
DEMK22: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-417-3698
Fer Plat Montage

144173698
NO PRIMARY REF14-417-3698: RNCC: 3 | RNVC: 2
108582: RNCC: 5 | RNVC: 9

6 Jul 1987

5120-14-442-1518
Serre Toles Outil

144421518
853-600-250-6: RNCC: 3 | RNVC: 2

3 Oct 1990

5120-14-522-4032
Cross Tip Screwdriver

145224032
AZD.2X125: RNCC: 3 | RNVC: 2
213/191/6: RNCC: 5 | RNVC: 2
013411: RNCC: 5 | RNVC: 2
3148510134116: RNCC: 5 | RNVC: 2
AZD-2X125: RNCC: 5 | RNVC: 9
AZD2X125: RNCC: 5 | RNVC: 9

26 Oct 2000

5120-14-283-1301
Bride Dappui

142831301
T0120BBF4APL2: RNCC: 3 | RNVC: 2
301717T: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-270-8698
Open End Wrench

142708698
203033: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-348-3831
Spanner Wrench

143483831
D47422: RNCC: 3 | RNVC: 2

29 Mar 1978

5120-14-385-3115
Mechanical Puller Attachment

143853115
360A93-3224-20: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-385-3418
Detent Handling Tool

143853418
6802P32-4129-00: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-232-9338
Screwdriver Bit

142329338
NO PRIMARY REF14-232-9338: RNCC: 3 | RNVC: 2
E74368C4X6-3: RNCC: 5 | RNVC: 2
0025020: RNCC: 5 | RNVC: 2
ET.104: RNCC: 5 | RNVC: 2
ET104: RNCC: 5 | RNVC: 2
ET4: RNCC: 5 | RNVC: 2
91364596: RNCC: 5 | RNVC: 2
91626497: RNCC: 5 | RNVC: 2
0614 176 94: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-480-9726
Socket Wrench Extension

144809726
409736: RNCC: 3 | RNVC: 2
409736-001: RNCC: 5 | RNVC: 9

11 Apr 1996

5120-14-232-9936
Matrice De Sertissa

142329936
48757-1: RNCC: 3 | RNVC: 2
48757: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-321-8534
Disque Equipe

143218534
6507568: RNCC: 3 | RNVC: 2
6507568: RNCC: 5 | RNVC: 1
85-626-7122: RNCC: 6 | RNVC: 9

1 Jan 1975

5120-14-244-4142
Socket Wrench Socket

142444142
J-20: RNCC: 3 | RNVC: 2
J20: RNCC: 3 | RNVC: 2
J.20: RNCC: 3 | RNVC: 2
3148510272405: RNCC: 5 | RNVC: 2
J20: RNCC: 5 | RNVC: 2
3272670226128: RNCC: 5 | RNVC: 2
0027240: RNCC: 5 | RNVC: 9
74J20: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-226-3128
Jet Formage Siege B

142263128
60290-01-43-010M1: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-283-9711

5120-14-457-9463
Cable Tie Installation Tool

144579463
853-100-286-0: RNCC: 3 | RNVC: 2

2 Oct 1992

5120-14-514-1230
Six Point Tip Screwdriver

145141230
ENFD6566-1-6X10X175: RNCC: 3 | RNVC: 2

27 Apr 1999

5120-14-232-1673
Open End Wrench

142321673
13 11-16X3-4: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-456-7142
Evasage Montage

144567142
853-930-156-0: RNCC: 3 | RNVC: 2

24 Jul 1992

5120-14-438-0827
Devasage Outil

144380827
853-600-208-0: RNCC: 3 | RNVC: 2

7 Mar 1990

5120-14-406-6575
Boitier Support

144066575
853-200-852-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-570-3018
Drift Punch

145703018
0714 63 22: RNCC: 3 | RNVC: 2

7 Dec 2011

5120-14-437-2563
Spanner Wrench

144372563
IND75104: RNCC: 3 | RNVC: 2

24 Jan 1990

5120-14-511-1373
Adjustable Wrench

145111373
113.8VSE: RNCC: 3 | RNVC: 2

2 Dec 1998

5120-14-517-1624
Spanner Wrench

145171624
Z11100040: RNCC: 3 | RNVC: 2

10 Nov 1999

5120-14-257-2921
Housse De Pales

142572921
FH152-935: RNCC: 3 | RNVC: 2
FH152-935: RNCC: 5 | RNVC: 9

1 Jan 1969

5120-14-479-0360
Socket Wrench Crowfoot Attachment

144790360
888-375-000-1: RNCC: 3 | RNVC: 2

6 Dec 1995

5120-14-530-5485
Mechanical Puller Attachment

145305485
U.15-08: RNCC: 3 | RNVC: 2
3148510663784: RNCC: 5 | RNVC: 2

20 Jun 2002

5120-14-479-4768
Cale

144794768
701873-00: RNCC: 3 | RNVC: 2

15 Jan 1996

5120-14-422-2339
Spanner Wrench

144222339
0436-01-132000: RNCC: 3 | RNVC: 2

24 Feb 1988

5120-14-532-3265
Screwdriver Bit

145323265
ETS.106: RNCC: 3 | RNVC: 2
1/LTT 237 23: RNCC: 5 | RNVC: 1
11068: RNCC: 5 | RNVC: 1
ETS-106: RNCC: 5 | RNVC: 2
3148510256351: RNCC: 5 | RNVC: 2

30 Oct 2002

5120-14-513-7376
Flat Tip Screwdriver

145137376
ENFD6560-0-8X4X100: RNCC: 3 | RNVC: 2

9 Apr 1999

5120-14-268-7040
Cross Tip Screwdriver

142687040
PA355-143A1P6: RNCC: 3 | RNVC: 9
PA355-143A1P6: RNCC: 5 | RNVC: 9

1 Jan 1970

5120-14-361-8686
Bague De Montage

143618686
MGF105-29: RNCC: 3 | RNVC: 2
MGF105-29: RNCC: 5 | RNVC: 2

20 Feb 1980

5120-14-392-7298
Spanner Wrench

143927298
0-408-52-016: RNCC: 3 | RNVC: 2
O-408-52-016: RNCC: 3 | RNVC: 2
0408-52016: RNCC: 5 | RNVC: 2

7 Apr 1984

5120-14-427-1495
Outil De Centrage

144271495
6252-54344: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-517-3781
Socket Head Screw Key

145173781
0XB101-301-000-01: RNCC: 3 | RNVC: 2

8 Dec 1999

5120-14-392-7221
Spanner Wrench

143927221
043801-624000: RNCC: 3 | RNVC: 2
0438-01-624000: RNCC: 5 | RNVC: 2

7 Apr 1984

5120-14-461-3662
Spanner Wrench

144613662
1X56-137-224: RNCC: 3 | RNVC: 2

9 Mar 1993

5120-14-415-0268
Faux Port.Car Outil

144150268
82-7-03-045W02-572791X: RNCC: 3 | RNVC: 2
0414055K00: RNCC: 5 | RNVC: 2
045G00-414055K: RNCC: 5 | RNVC: 2
414055K: RNCC: 5 | RNVC: 2
91572554: RNCC: 5 | RNVC: 2

26 Mar 1987

5120-14-469-0401
Screwdriver Bit

144690401
EVL-T-20: RNCC: 3 | RNVC: 2
EVLT20: RNCC: 3 | RNVC: 2
3272670343672: RNCC: 5 | RNVC: 2

5 Apr 1994

5120-14-428-5259
Remote Control Lever

144285259
MJK3462111: RNCC: 3 | RNVC: 2

8 Dec 1988

5120-14-491-5772
Cle

144915772
NO PRIMARY REF14-491-5772: RNCC: 3 | RNVC: 2
11CFS: RNCC: 5 | RNVC: 9
F300 0T 003 4091: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-306-3454
Guide Montage Arbre

143063454
330A98-3433-20: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-244-4057
Spanner Wrench

142444057
NO PRIMARY REF14-244-4057: RNCC: 3 | RNVC: 2
4205-1: RNCC: 5 | RNVC: 9
K7N1: RNCC: 5 | RNVC: 9
K7-1: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-412-7746
Support Equilibrage

144127746
NO PRIMARY REF14-412-7746: RNCC: 3 | RNVC: 2
H140AMV217M: RNCC: 5 | RNVC: 9

5 Nov 1986

5120-14-322-9577
Hand Rivet Set Assortment

143229577
121A97-015-00-0: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-338-7858
Spanner Wrench

143387858
NO PRIMARY REF14-338-7858: RNCC: 3 | RNVC: 2
1186-40-65: RNCC: 5 | RNVC: 9
2224012570: RNCC: 5 | RNVC: 9
2401: RNCC: 5 | RNVC: 9
24012065: RNCC: 5 | RNVC: 9
7600-2: RNCC: 5 | RNVC: 9

17 Dec 1976

5120-14-464-2460
Maintien Outillage

144642460
854-500-364-0: RNCC: 3 | RNVC: 2

28 Jul 1993

5120-14-212-9129
Cle Double Speciale

142129129
9970-115-170: RNCC: 3 | RNVC: 2
9970-115-170-01: RNCC: 3 | RNVC: 2

1 Jan 1964

5120-14-400-1956
Bearing And Bushing Inserter

144001956
332A93-3107-00: RNCC: 3 | RNVC: 2

24 Apr 1985

5120-14-247-8529
Cle Speciale

142478529
80900-410: RNCC: 3 | RNVC: 2
79485-45: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-485-8820
Open End Wrench

144858820
K7739-12109-4BAX6BA: RNCC: 3 | RNVC: 2
12109-4BAX6BA: RNCC: 5 | RNVC: 2

19 Feb 1997

5120-14-264-0602
Socket Head Screw Key

142640602
801W3-32: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-444-6981
Spanner Wrench

144446981
30AS520817-2A1: RNCC: 3 | RNVC: 2

16 Jan 1991

5120-14-490-1379
Socket Wrench Socket

144901379
RTX.10: RNCC: 3 | RNVC: 2
3148510533704: RNCC: 5 | RNVC: 2
RTX-10: RNCC: 5 | RNVC: 2
91778010: RNCC: 5 | RNVC: 2
0715 112 10: RNCC: 5 | RNVC: 2
0053370: RNCC: 5 | RNVC: 9

17 Sep 1997

5120-14-378-3148
Protege Serrage Hyd

143783148
02640908700: RNCC: 3 | RNVC: 2
026409087: RNCC: 5 | RNVC: 2

20 Jul 1982

5120-14-264-0430

5120-14-274-8690

5120-14-302-6646

5120-14-332-3833
Face Spanner Wrench Socket

143323833
M31-067: RNCC: 3 | RNVC: 2
M31-067: RNCC: 5 | RNVC: 9

2 Jul 1975

5120-14-253-9475
Verin De Verrouilla

142539475
NO PRIMARY REF14-253-9475: RNCC: 3 | RNVC: 2
1572C13B: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-465-4729
Bearing And Bushing Remover

144654729
851-500-182-0: RNCC: 3 | RNVC: 2

30 Sep 1993

5120-14-244-4264
Flat Tip Screwdriver

142444264
10-043: RNCC: 3 | RNVC: 2
0UTF11: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-325-3051
Spanner Wrench

143253051
600403590: RNCC: 3 | RNVC: 2
0561: RNCC: 5 | RNVC: 2
2097C: RNCC: 5 | RNVC: 2
0561: RNCC: 5 | RNVC: 9
2097C: RNCC: 5 | RNVC: 9
600403590: RNCC: 5 | RNVC: 9
85-686-3054: RNCC: 6 | RNVC: 9

2 Jul 1975

5120-14-369-8435
Socket Wrench Socket

143698435
IT152-D6PL0: RNCC: 3 | RNVC: 2

18 May 1981

5120-14-349-2494
Electrical Card Extractor

143492494
P4H009719-00: RNCC: 3 | RNVC: 2
4H009719-00: RNCC: 5 | RNVC: 2
4H009719-00: RNCC: 5 | RNVC: 9
P4H009719-00: RNCC: 5 | RNVC: 9

22 May 1978

5120-14-232-6816
Socket Wrench Extension

142326816
VKA: RNCC: 3 | RNVC: 2
A210: RNCC: 3 | RNVC: 2
V2-95-006: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-384-1990
Faux Mors

143841990
26-281-12: RNCC: 3 | RNVC: 2

4 May 1983

5120-14-264-0574
Flat Tip Screwdriver

142640574
E74-351-1-6X10X200R0NDE: RNCC: 2 | RNVC: 2
T010: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-406-6198
Joints Emmanche

144066198
853-200-834-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-463-9777
Emmanchement Broche

144639777
854-500-329-0: RNCC: 3 | RNVC: 2

7 Jul 1993

5120-14-459-5218
Cambreur Relais

144595218
TL21-30-14: RNCC: 3 | RNVC: 2
CPOU6090: RNCC: 5 | RNVC: 9

9 Dec 1992

5120-14-482-1539
Flat Tip Screwdriver

144821539
ACZH.5,5X125: RNCC: 3 | RNVC: 2
314851: RNCC: 5 | RNVC: 2
3148510041452: RNCC: 5 | RNVC: 2
ACGH.5,5X125: RNCC: 5 | RNVC: 2
ACGH5-5X125: RNCC: 5 | RNVC: 2
0613 240 45: RNCC: 5 | RNVC: 2
0613 356 1: RNCC: 5 | RNVC: 2

20 Jun 1996

5120-14-406-6196
Joints Emmanche

144066196
853-200-794-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-427-6436
Torque Wrench Adapter

144276436
10.10: RNCC: 3 | RNVC: 2
10-10: RNCC: 5 | RNVC: 2
0239386F00: RNCC: 5 | RNVC: 2
0092525: RNCC: 5 | RNVC: 9

27 Oct 1988

5120-14-377-3005
Montage-Demon Outil

143773005
MG010-02-00: RNCC: 3 | RNVC: 2
MG010-02-00: RNCC: 5 | RNVC: 2

17 May 1982

5120-14-326-2752
Screwdriver Bit

143262752
330A95-5505-23: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-465-9599
Screw Push-Pull Jack

144659599
V110-00: RNCC: 3 | RNVC: 2
70918006: RNCC: 5 | RNVC: 2

22 Oct 1993

5120-14-274-8694
Extenseur Ensemble

142748694
R31674-12-18R38: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-479-0353
Bearing And Bushing Inserter And Remover

144790353
888-371-500-1: RNCC: 3 | RNVC: 2

6 Dec 1995

5120-14-302-6669

5120-14-272-8640

5120-14-418-2922
Stroboscope

144182922
1531AB: RNCC: 3 | RNVC: 2
85-693-5276: RNCC: 6 | RNVC: 9

11 Aug 1987

5120-14-387-1191
Open End Wrench

143871191
NB307401P0011: RNCC: 3 | RNVC: 2
VTR321-2-11198: RNCC: 5 | RNVC: 2

24 Aug 1983

5120-14-438-7698
Mechanical Puller Attachment

144387698
330A93-2013-10: RNCC: 3 | RNVC: 2

4 Apr 1990

5120-14-234-3352
Open End Wrench

142343352
NO PRIMARY REF14-234-3352: RNCC: 3 | RNVC: 2
0A67: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-234-4244
Poignee De Maintien

142344244
403741T: RNCC: 3 | RNVC: 2
17926T1REP2: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-508-2738
Outillage Essais

145082738
OU146401: RNCC: 3 | RNVC: 2
OU146401: RNCC: 5 | RNVC: 2

2 Sep 1998

5120-14-444-3483
Socket Wrench Socket

144443483
GS86-09: RNCC: 3 | RNVC: 2

9 Jan 1991

5120-14-406-0985
Hand Terminal Crimping Tool

144060985
11-01-0084: RNCC: 3 | RNVC: 2
HTR1031E: RNCC: 5 | RNVC: 2

8 Jan 1986

5120-14-330-4684
Ergot De Broche

143304684
Z1-72-88: RNCC: 3 | RNVC: 9
Z1728-8: RNCC: 5 | RNVC: 9
Z17288: RNCC: 5 | RNVC: 9

2 Jul 1975

5120-14-043-1826
Outillage Mise Nive

140431826
OU50392: RNCC: 3 | RNVC: 2
50392: RNCC: 3 | RNVC: 2
0U50392: RNCC: 5 | RNVC: 2
0U50392ERAM: RNCC: 5 | RNVC: 2
50392: RNCC: 5 | RNVC: 9

10 Apr 1984

5120-14-457-9970
U De Reglage

144579970
TOP7G113: RNCC: 3 | RNVC: 2

2 Oct 1992

5120-14-376-2287
Mechanical Puller Attachment

143762287
NO PRIMARY REF14-376-2287: RNCC: 3 | RNVC: 2
0U133373: RNCC: 5 | RNVC: 9

30 Mar 1982

5120-14-309-1955
Guide Porte Cle

143091955
5423J88: RNCC: 3 | RNVC: 2
85-686-2578: RNCC: 6 | RNVC: 9

1 Jan 1974

5120-14-557-1869
Socket Wrench Socket

145571869
RHC-14: RNCC: 3 | RNVC: 2

23 May 2008

5120-14-222-1431
Flat Tip Screwdriver

142221431
E74-351-1-6X10X150BAI0NNETTE: RNCC: 2 | RNVC: 2
249-9: RNCC: 3 | RNVC: 2
FRP4: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-459-5410
Socket Wrench Socket

144595410
K.1'3/16LA: RNCC: 3 | RNVC: 2
K.1-3/16LA: RNCC: 5 | RNVC: 2
3148510304908: RNCC: 5 | RNVC: 2
0030490: RNCC: 5 | RNVC: 9

10 Dec 1992

5120-14-309-7559
Screwdriver Bit Set And Handle

143097559
TR-3: RNCC: 3 | RNVC: 2
TR3: RNCC: 3 | RNVC: 2
3272670242814: RNCC: 5 | RNVC: 2

1 Jan 1974

5120-14-303-6425
Torque Wrench Adapter

143036425
D0-11: RNCC: 3 | RNVC: 2
D011: RNCC: 3 | RNVC: 2
3272670209121: RNCC: 5 | RNVC: 2
D011: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-264-0578
Quick Adjusting Screw Clamp

142640578
272A.500: RNCC: 3 | RNVC: 2
3225-50: RNCC: 3 | RNVC: 2
APB50: RNCC: 3 | RNVC: 2
272-50: RNCC: 5 | RNVC: 2
272.A500: RNCC: 5 | RNVC: 2
272A500: RNCC: 5 | RNVC: 2
3148511630051: RNCC: 5 | RNVC: 2
0695 948 50: RNCC: 5 | RNVC: 2
0163005: RNCC: 5 | RNVC: 9

1 Jan 1970

5120-14-330-7077
Torque Wrench Adapter

143307077
BR4X601: RNCC: 3 | RNVC: 2
4X601: RNCC: 5 | RNVC: 2
85-100-4949: RNCC: 6 | RNVC: 9

2 Jul 1975

5120-14-222-7376
Open End Wrench

142227376
20S15X14: RNCC: 3 | RNVC: 2
19-15X14: RNCC: 5 | RNVC: 9

1 Jan 1966

5120-14-234-3939
Poignee Complete

142343939
67029: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-466-2631
Flat Tip Screwdriver

144662631
851-115-007-0: RNCC: 3 | RNVC: 2

3 Nov 1993

5120-14-532-2523
Socket Wrench Socket

145322523
R.11/32E: RNCC: 3 | RNVC: 2

23 Oct 2002

5120-14-247-3931
Hand Tube Flaring Tool

142473931
8459-130: RNCC: 3 | RNVC: 2
91646050: RNCC: 5 | RNVC: 2
8459-130: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-271-6869
Tournevis Special

142716869
NO PRIMARY REF14-271-6869: RNCC: 3 | RNVC: 2
144H64: RNCC: 5 | RNVC: 9

1 Jan 1970

5120-14-253-3590
Cle

142533590
NO PRIMARY REF14-253-3590: RNCC: 3 | RNVC: 2
14321: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-256-6011
Socket Head Screw Key

142566011
83-16: RNCC: 3 | RNVC: 2
0123160: RNCC: 3 | RNVC: 2
190-16: RNCC: 3 | RNVC: 9
82-16: RNCC: 5 | RNVC: 2
82.16: RNCC: 5 | RNVC: 2
DEM190-16: RNCC: 5 | RNVC: 9

1 Jan 1969

5120-14-305-9451
Cle Manoeuvre Vireu

143059451
02640015000: RNCC: 3 | RNVC: 2
026400150: RNCC: 5 | RNVC: 2
204822: RNCC: 5 | RNVC: 2

1 Jan 1974

5120-14-343-8368

5120-14-241-1638
Matrice Montee Conn

142411638
8459-124: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-293-7585

5120-14-271-6121

5120-14-281-2964
Cle A Ergots Ecrou

142812964
C46837: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-469-2279
Seal Inserter And Remover

144692279
40N108313-3: RNCC: 3 | RNVC: 2

13 Apr 1994

5120-14-469-2282
Bearing And Bushing Inserter And Remover

144692282
40N1293026-2: RNCC: 3 | RNVC: 2

13 Apr 1994

5120-14-319-4070
Torque Wrench Adapter

143194070
D-3/4: RNCC: 3 | RNVC: 2
D3-4: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-428-5994
Fixation Support

144285994
46AM101-02-0002: RNCC: 3 | RNVC: 2

8 Dec 1988

5120-14-271-5235
Bloc De Pre-Sertiss

142715235
RPS5F20X1K: RNCC: 3 | RNVC: 2
RPS4F18-20K: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-536-9621
Plug Electrical Connector Extractor

145369621
74Z-0-0-272: RNCC: 3 | RNVC: 2
22648614: RNCC: 5 | RNVC: 2

24 Sep 2003

5120-14-385-3354
Mechanical Puller Attachment

143853354
365A93-3244-20: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-488-8666
Open End Wrench

144888666
13-28X29: RNCC: 3 | RNVC: 2
13.28X29: RNCC: 3 | RNVC: 2
3272670335882: RNCC: 5 | RNVC: 2

10 Jun 1997

5120-14-385-3447
Spanner Wrench

143853447
6803P33-6144-20: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-559-2266
Electrical Contact Remover

145592266
S 083: RNCC: 3 | RNVC: 2

15 Dec 2008

5120-14-324-9412
Socket Wrench Socket

143249412
J.13: RNCC: 3 | RNVC: 2
0027170: RNCC: 5 | RNVC: 2
3148510271705: RNCC: 5 | RNVC: 2
J13: RNCC: 5 | RNVC: 2
91352505: RNCC: 5 | RNVC: 2
CAE00911: RNCC: 5 | RNVC: 2
00-134-5100: RNCC: 6 | RNVC: 9

1 Jan 1975

5120-14-248-7485
Cle Speciale

142487485
G1-15-659-3: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-261-7679
Piece Intermediaire

142617679
536-414-068: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-270-5808
Tube Fitting Wrenching Socket

142705808
7-000102-7: RNCC: 3 | RNVC: 2
7-000102-7: RNCC: 5 | RNVC: 9
140180B: RNCC: 5 | RNVC: 9
140480: RNCC: 5 | RNVC: 9

1 Jan 1970

5120-14-525-9420
Drift

145259420
888-405-300-1: RNCC: 3 | RNVC: 2

20 Jun 2001

5120-14-326-0187
Bearing And Bushing Inserter

143260187
NO PRIMARY REF14-326-0187: RNCC: 3 | RNVC: 2
151934-1: RNCC: 5 | RNVC: 9

2 Jul 1975

5120-14-542-4918
Screwdriver Bit Set And Handle

145424918
AMD-M/AMC.T: RNCC: 3 | RNVC: 2
23597: RNCC: 5 | RNVC: 2
UX030186: RNCC: 6 | RNVC: 9

21 Jul 2004

5120-14-468-6202
Bearing And Bushing Remover

144686202
330A98-2085-03: RNCC: 3 | RNVC: 2
330A98208503: RNCC: 3 | RNVC: 2

9 Mar 1994

5120-14-252-7811
Adjustable Wrench

142527811
E74322-180NW: RNCC: 2 | RNVC: 2

1 Jan 1968

5120-14-406-5672
Demontage Outil

144065672
853-200-767-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-373-0946
Serre-Joint Etrier

143730946
854-400-306-0: RNCC: 3 | RNVC: 2

21 Sep 1981

5120-14-329-3069
Cle A Panier

143293069
GSM196-010F69: RNCC: 3 | RNVC: 2

2 Jul 1975

Load More Results