What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.

A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Blacksmith's Punch?

A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Mechanical Finger?

A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.

A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Screwdriver And Wrench Assembly?

A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Stakeholder Bench Plate?

A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.

What is a Drill Drift?

A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.

A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Digging Bar?

A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

What is a Valve Spring Lifter?

A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.

What is a Fuse Puller?

A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.

Hand Tools, Nonedged, Nonpowered - France (FR)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by France (FR) - NCB is 14

Page 105 of 110

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by France

51	20	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - France (FR)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 16 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Pipe Vise? 19 Items: A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.
What is a Hand Vise? 25 Items: A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.
What is a Hand Hydraulic Jack? 133 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 153 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 903 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 17 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
Swage,Bottom,Blacksmith's 10 Items
What is a Hand Tube Flaring Tool? 23 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Blacksmith's Punch? 12 Items: A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.
What is a Drain Plug Wrench? 45 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 57 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 16 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 3829 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
Flatter,Blacksmith's 18 Items
Swage,Top,Blacksmith's 12 Items
What is a Pipe Wrench? 110 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 149 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 53 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
Screwdriver,Offset 54 Items
What is a Screwdriver Bit? 707 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Mechanical Finger? 25 Items: A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.
What is a Socket Wrench Socket? 1803 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 1412 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 1641 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 52 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 565 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
Jack,Push-Pull,Screw 30 Items
What is a Hand Tube Bender? 54 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 1106 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 55 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pinch Bar? 19 Items: A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.
What is a Pry Bar? 17 Items: A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.
What is a Wrecking Bar? 15 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 273 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 413 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 32 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 295 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
Face,Hammer,Inserted 25 Items
What is a Hole Sheet Metal Holder? 37 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Screwdriver And Wrench Assembly? 11 Items: A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.
What is a Hand Rivet Set? 121 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Stakeholder Bench Plate? 22 Items: A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.
What is a Drill Drift? 32 Items: A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.
What is a Tack Claw? 15 Items: A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.
Mattock 28 Items
What is a Socket Wrench Handle Bar? 108 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Stake,Sheet Metalworking 50 Items
Riveter,Blind,Hand 76 Items
What is a Hand Shovel? 43 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 98 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 30 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
What is a Digging Bar? 20 Items: A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.
Block,Dolly,Sheet Metalworking 56 Items
What is a Piston Ring Compressor? 34 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Valve Spring Lifter? 29 Items: A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.
What is a Fuse Puller? 20 Items: A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.
What is a Hand Lead Seal Press? 18 Items: A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.
What is a Hand Beading Tool? 91 Items: A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.
What is a Hand Hammer? 502 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
Head,Hand Hammer 81 Items
What is a Lamp Extractor? 76 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Tube Packing Ring Installing Tool? 29 Items: A Tube Packing Ring Installing Tool (INSTALLING TOOL,TUBE PACKING RING) is an item designed to insert packing rings on tubes within tube sheets on condensers and similar heat exchangers. In operation, the packing rings are assembled on the loading pin mandrel and are then transferred from the mandrel on to the tube by means of a tubular sleeve which slides on the mandrel.
What is a Carpenters' Pincers? 18 Items: A Carpenters' Pincers (PINCERS,CARPENTERS') is a plierlike hand tool having two opposing jaws which may have hammerlike backs. One handle has a nail or tack pulling claw, the other is shaped to form a screwdriver. The tool may contain a wire cutter. See also NIPPERS, END CUTTING and PINCERS, FARRIERS'.
What is a Trowel? 33 Items: A Trowel is a tool used for bricklaying, concrete work, plastering, linoleum laying, and masonry work. Excludes CORNER TOOL, CONCRETE.
What is a Hand Abrasive Wheel Dresser? 12 Items: A Hand Abrasive Wheel Dresser (DRESSER,ABRASIVE WHEEL,HAND) is a tool designed to remove glaze from, dress, shape, sharpen, and true solid abrasive wheels. Excludes NIB, DIAMOND, WHEEL DRESSING.
What is a Lamp Cap Extractor? 32 Items: A Lamp Cap Extractor (EXTRACTOR,LAMP CAP) is a tool specifically designed to facilitate the removal of lamp caps from switchboards, panels or indicator lamps.
What is a Rivet Bucking Bar? 51 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 86 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 277 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Woven Cable Grip? 23 Items: A Woven Cable Grip (GRIP,CABLE,WOVEN) is a braided wire device designed to clutch a bare or insulated conductor, cable or wire rope, for holding taut or drawing through conduit.
What is a Screw Thread Insert Extractor? 19 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is an Electron Tube Extractor? 18 Items: An Electron Tube Extractor (EXTRACTOR,ELECTRON TUBE) is a hand tool designed to facilitate the removal of electron tubes from electronic equipment and to avoid burning the fingers. It may be used for installing tubes.
What is a Cross Tip Screwdriver? 362 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 21 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 11 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 37 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Tool Handle Wedge? 10 Items: A Tool Handle Wedge (WEDGE,TOOL HANDLE) is excludes WEDGE, WOOD.
What is a Marlinespike? 16 Items: A Marlinespike is a metal hand tool made in the shape of a tapered pin. One end is pointed and the opposite end may be headed. The body may contain an eye for a lanyard sling, or be grooved lengthwise. Excludes CABLE PICK and FID.
What is an Aligning Punch? 272 Items: An Aligning Punch (PUNCH,ALIGNING) is a round, square, hexagonal or octagonal bodied hand tool, having a round tapered section 6-1/2 inches (165.1 mm) or more in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, DRIFT and DRIFTPIN.
What is a Drift Punch? 25 Items: A Drift Punch (PUNCH,DRIFT) is a round, square, hexagonal, or octagonal bodied hand tool, having a round tapered section 4 to 6 inches (101.6 mm to 152.4 mm) inclusive in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, ALIGNING; and DRIFTPIN.
What is a Putty Knife? 36 Items: A Putty Knife (KNIFE,PUTTY) is a hand tool with a nonedged blade fixed to a handle for laying on and smoothing putty and the like.
What is a Socket Wrench Adapter-Extension? 40 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 30 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 184 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Socket Wrench Ratchet Attachment? 47 Items: A Socket Wrench Ratchet Attachment (RATCHET ATTACHMENT,SOCKET WRENCH) is a connection for socket wrenches and handles. Consists of a ratcheting mechanism with an internal drive on one end and an external drive on the opposite end of the same size. The item is designed to permit continuous rotation of the socket in one direction without removing the socket or handle and without a complete rotation of the handle.
What is a Wrench Extension Handle? 81 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Socket Wrench Crowfoot Attachment? 155 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 33 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 43 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 48 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 2394 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 372 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 300 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 661 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 32 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand-Operated Grommet And Eyelet Press? 12 Items: A Hand-Operated Grommet And Eyelet Press (PRESS,GROMMET AND EYELET,HAND-OPERATED) is a device which punches or pierces holes and in addition fastens or sets eyelets and grommets in cloth, paper and similar material. May be used for fastening or setting rivets, lacing hooks and snaps in cloth, paper and similar material. It is hand operated by lever or screw action. See also PUNCH, EYELET, PLIER TYPE and PRESS, GROMMET AND EYELET, FOOT OPERATED.
What is a Claw Bar? 19 Items: A Claw Bar (BAR,CLAW) is before using, refer to Reference Drawing Group AG.
What is a Shock Type Wheel Stud Nut Wrench? 11 Items: A Shock Type Wheel Stud Nut Wrench (WRENCH,WHEEL STUD NUT,SHOCK TYPE) is a manually operated item designed to remove wheel stud nuts. In operation the inner nut is turned by a socket attached to a shaft on which is a loose swinging weighted handle. The weighted handle may be swung quickly to provide an impact force against the socket to loosen the seized or jammed nuts. The outer nut is held stationary by a separate hexagonal holding wrench.
What is a Drift Pin Set? 30 Items: A Drift Pin Set is a group of DRIFTPIN having different characteristics.
What is a Tire Iron? 25 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 115 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Blacksmith's Vise? 14 Items: A Blacksmith's Vise (VISE,BLACKSMITH'S) is a clamping device consisting of a mounting plate, one stationary and one manual screw actuated jaw and a supporting member extending downward from the stationary jaw to the floor. Designed to be mounted on a bench, table or the like. May include pipe holding jaws.
What is a Machinist's Vise? 64 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Clamp Base Bench Vise? 10 Items: A Clamp Base Bench Vise (VISE,BENCH,CLAMP BASE) is a clamping device consisting of a base, one stationary and one manual screw actuated jaw, and one or more guide bars or rods. Designed with an integral clamp for attaching to a bench, table, or the like. Does not include pipe holding jaws.
What is a Fixed Open End Wrench Set? 86 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Nail Set? 11 Items: A Nail Set is a round knurled, square, hexagonal or octagonal bodied hand tool having a round tapered section terminating in a cupped point. It is designed to set brad head nails below the surface by striking it a hammerlike blow. See also PUNCH, DRIVE PIN.
What is a Socket Wrench Set? 202 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is an Open End Box Wrench Set? 10 Items: An Open End Box Wrench Set (WRENCH SET,OPEN END BOX) is a group of WRENCH, OPEN END BOX having different characteristics.
What is a Combination Box And Open End Wrench Set? 72 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Box Wrench Set? 36 Items: A Box Wrench Set (WRENCH SET,BOX) is a group of box wrenches having different characteristics. It may include a HANDLE, EXTENSION WRENCH. See also WRENCH SET, COMBINATION, BOX AND OPEN END.
What is a Hot Line Stick? 26 Items: A Hot Line Stick is a hand tool consisting of a straight, round stick (pole) made of a suitable nonconductive material with a tool fixed to one end. The other end may be plain or have a butt mounting device fixed to it. Various types of attachments (hooks, rings, and bands) may be fixed to the body. It is designed for use in the repair and maintenance of live high voltage aerial lines. Excludes hot line sticks without heads.
Handle,Mattock-Pick 15 Items
What is a Wrench Kit? 73 Items: A Wrench Kit is an assortment of various types and sizes of wrenches such as SOCKET, SOCKET WRENCH; WRENCH, OPEN END, FIXED; WRENCH, BOX and the like. It may include adapter(s), ratchet(s) and the like. See also WRENCH SET (as modified.
What is a Brad Awl? 15 Items: A Brad Awl (AWL,BRAD) is a small, pointed tool used by shoemakers, saddlers, cabinetmakers, and the like for piercing small holes in wood, leather, and similar materials, and consists of a handle with a ferrule and a blade. The blade is round, terminating in a beveled, sharp straight edge and has a shank which passes through the center of the handle.
What is a Scratch Awl? 20 Items: A Scratch Awl (AWL,SCRATCH) is an item whose nominal length of blade is less than 4 inches (101.6 millimeters) and is provided with a nondetachable handle.
What is a Screw Extractor Set? 10 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 102 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
Jack,Scissors,Hand 26 Items
What is a Piston Ring Expander? 23 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
Mallet,Plastic 62 Items
Mallet,Rubber 10 Items
What is a Wood Mallet? 37 Items: A Wood Mallet (MALLET,WOOD) is excludes MALLET, CALKING; MALLET, HAWSING and MALLET, SERVING.
What is a Rack Bar Jack? 30 Items: A Rack Bar Jack (JACK,RACK BAR) is excludes JACK, BUMPER and JACK, REEL, HAND.
What is a Pneumatic Tire Valve Core Inserter And Remover? 14 Items: A Pneumatic Tire Valve Core Inserter And Remover (INSERTER AND REMOVER,PNEUMATIC TIRE VALVE CORE) is a bar of steel having a small cylindrical slotted end for removing or installing a valve core in a valve stem by a screwing motion. See also REPAIR TOOL, PNEUMATIC TIRE VALVE.
What is a Hand Tube Swaging Tool Kit? 20 Items: A Hand Tube Swaging Tool Kit (SWAGING TOOL KIT,TUBE,HAND) is a hand-operated noncutting tool consisting of one or more PUNCH, TUBE SWAGING, HAND and a tube flaring bar.
What is a Hand Tube Flaring Punch? 11 Items: A Hand Tube Flaring Punch (PUNCH,TUBE FLARING,HAND) is a noncutting tool having a shaped end or section designed to flare the ends of tubes. One type is designed to flare the ends of tubes against a tube sheet, and another to flare tube ends to mate with tube fittings. Includes punch components of FLARING TOOL, TUBE, HAND.
What is a Hose Strap Band Clamping Tool? 26 Items: A Hose Strap Band Clamping Tool (CLAMPING TOOL,STRAP BAND,HOSE) is an item designed to tension and lock metal straps around a rubber hose, and the like. It is also used to clamp and hold fittings therein.
What is a Mechanical Puller? 3073 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 470 Items
What is a Slip Joint Pliers? 84 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Brake Repair Pliers? 14 Items: A Brake Repair Pliers (PLIERS,BRAKE REPAIR) is a tool having jaws designed for use in brake repair operations, such as removing and replacing items such as keys, springs, and the like. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 226 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 12 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 81 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 56 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 15 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 11 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 29 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Cross Tip Screwdriver Set? 14 Items: A Cross Tip Screwdriver Set (SCREWDRIVER SET,CROSS TIP) is a group of SCREWDRIVER, CROSS TIP having different characteristics.
What is a Spanner Wrench Set? 18 Items: A Spanner Wrench Set (WRENCH SET,SPANNER) is a group of items under WRENCH, SPANNER having different characteristics.
What is a Drive Pin Punch Set? 31 Items: A Drive Pin Punch Set (PUNCH SET,DRIVE PIN) is a group of PUNCH, DRIVE PIN having different characteristics.
What is an Aligning Punch Set? 13 Items: An Aligning Punch Set (PUNCH SET,ALIGNING) is a group of PUNCH, ALIGNING having different characteristics. See also DRIFTPIN SET.
What is a Slugging Type Box Wrench Socket? 16 Items: A Slugging Type Box Wrench Socket (SOCKET,SLUGGING TYPE BOX WRENCH) is an item having a hexagonal external drive at one end, made to fit into the internal hexagonal or 12-point opening of a slugging type box wrench. The opposite end has a single-broached hexagonal opening of the same size as the external drive. The item is designed with extra thick walls to withstand the impact of sledge blows on the driving wrench.
What is a Mechanical Puller Step Plate? 44 Items: A Mechanical Puller Step Plate (STEP PLATE,MECHANICAL PULLER) is a circular disk, flanged to provide a shoulder, and designed to provide a base for the screw point of a PULLER, MECHANICAL when pulling externally mounted bearings, gears, and the like from hollow shafts or housings. It has a concentric, countersunk hole to accommodate the puller screw point.
What is a Solid Center Punch? 79 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Cable Type Ratchet Lever Puller? 20 Items: A Cable Type Ratchet Lever Puller (PULLER,RATCHET LEVER,CABLE TYPE) is an item consisting of a metal frame and ratchet lever reel to which is attached one end of a flexible cable (wire rope). The cable feeds through the fast eye in the metal frame, and may be reeved through a slip hook tackle hook. See also BINDER, LOAD; HOIST, WIRE ROPE and STRETCHER, WIRE.
What is an Electronic Equipment Tuning Wand? 18 Items: An Electronic Equipment Tuning Wand (TUNING WAND,ELECTRONIC EQUIPMENT) is a hand-held rod used in determining the adjustment of the windings of a radio frequency coil. It is made of insulating material with iron on one end and brass on the other end. By inserting the iron end in the coil, the inductance is increased and by inserting the brass end, the inductance is decreased.
What is a Combination Open End And Spanner Wrench? 14 Items: A Combination Open End And Spanner Wrench (WRENCH,OPEN END AND SPANNER,COMBINATION) is a tool having open end wrench characteristics at one end and spanner wrench features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s) at the other end.
What is a Detent Handling Tool? 187 Items: A Detent Handling Tool (HANDLING TOOL,DETENT) is a specially designed handling tool consisting of a rigid bar with a T-handle on one end. The other end is equipped with threads designed to mate the threads of a detent to facilitate inserting or extracting.
What is a Hand Material Handling Hook? 23 Items: A Hand Material Handling Hook (HOOK,MATERIAL HANDLING,HAND) is a hook whose curved end conforms to Style AP1, AP2, AP3 or AP4 of Reference Drawing Group AP. Excludes HOOK, MANHOLE COVER, HAND; HOOK, WIRE BREAKING, HAND; HOOK, ROCK CRUSHER FEEDING, HAND; HOOK, STRAINER REMOVING, HAND and HOOKS, BAG HANDLING, HAND.
What is a Magnetic Retrieving Tool? 11 Items: A Magnetic Retrieving Tool (RETRIEVING TOOL,MAGNETIC) is a hand-operated magnetic device used to locate and pick up metallic articles, such as bolts, nuts, pins, washers, and the like, in confined spaces. It may be rigid, flexible or adjustable. Excludes FINGER, MECHANICAL.
What is a Mechanical Puller Adapter? 78 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Combination Box And Open End Box Wrench? 13 Items: A Combination Box And Open End Box Wrench (WRENCH,BOX AND OPEN END BOX,COMBINATION) is a double end wrench, box and open end box, primarily designed for removing or replacing tube fittings. The opening in the open end box may be machined at an angle from the longitudinal center line of the wrench.
What is a Screw Thread Insert Inserter? 136 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Flat Tip Screwdriver Set? 48 Items: A Flat Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP) is a group of SCREWDRIVER, FLAT TIP having different characteristics.
What is a Terminal Crimping Tool Contact Positioner? 89 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 16 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is an Adjustable Wrench? 138 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 239 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 75 Items
Handle,Shovel 10 Items
What is a Socket Wrench Spanner Attachment? 88 Items: A Socket Wrench Spanner Attachment (SPANNER ATTACHMENT,SOCKET WRENCH) is an item having an adjustable or fixed span with pin, hook, or key type end that is used to fit and turn various size retaining rings, cover plates, plugs, couplings, and like parts. Usually designed to be driven by a male driver.
What is a Retaining Ring Installation Tool? 44 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Tacker? 16 Items: A Tacker is a hand-operated, hammerlike or gunlike item without a clincher, used to drive preformed connecting elements like pins, nails or staples through one object or piece of material into another. Excludes STAPLER (as modified).
What is a Bearing And Bushing Inserter? 290 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 207 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 939 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 14 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 93 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 161 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 94 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 141 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 53 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Six Point Tip Screwdriver? 155 Items: A Six Point Tip Screwdriver (SCREWDRIVER,SIX POINT TIP) is a manual screwdriver having a single nonremoveable blade having a tip with six rounded points.
What is a Seal Inserter And Remover? 147 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 478 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is a Preformed Packing Inserter And Remover? 34 Items: A Preformed Packing Inserter And Remover (INSERTER AND REMOVER,PREFORMED PACKING) is a hand tool designed to install and remove a PACKING, PREFORMED.
What is a Pin Remover? 34 Items: A Pin Remover (REMOVER,PIN) is a hand tool designed to facilitate the removal of a pin from a hole.
What is a Pin Inserter And Remover? 13 Items: A Pin Inserter And Remover (INSERTER AND REMOVER,PIN) is a rodlike tool designed to facilitate the insertion and removal of a pin from a hole.
What is an Electrical Contact Inserter And Remover? 37 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Piston Inserter? 40 Items: A Piston Inserter (INSERTER,PISTON) is a tool designed to permit installation of a piston or piston assembly without damaging the packings or piston.
What is a Spring Inserter And Remover? 85 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 13 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Stud Inserter? 22 Items: A Stud Inserter (INSERTER,STUD) is a device designed to drive in studs. It does not have any facilities for removing or extracting studs. See also INSERTER AND REMOVER, STUD.
What is a Stud Inserter And Remover? 17 Items: A Stud Inserter And Remover (INSERTER AND REMOVER,STUD) is a group of items designed to extract and to drive studs. It may include collets, guides, housings, holders and the like. See also REMOVER SET, STUD and INSERTER, STUD.
What is a Gear Inserter? 54 Items: A Gear Inserter (INSERTER,GEAR) is a hand tool designed to install various gears onto a gearshaft. It may be operated by a pushing or a striking force.
What is a Crimping Tool Die? 73 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is an Electrical Connector Inserter? 45 Items: An Electrical Connector Inserter (INSERTER,ELECTRICAL CONNECTOR) is a hand tool designed to hold an electrical connector, and to assist in the positioning and installation of the connector on a cover, panel or the like.
What is a Float? 12 Items: A Float is a tool used for concrete, plastering and grouting work.
What is a Mechanical Puller Set? 19 Items: A Mechanical Puller Set (PULLER SET,MECHANICAL) is two or more separate PULLER, MECHANICAL of different fixed sizes.
What is a Lifting Pneumatic Bag? 11 Items: A Lifting Pneumatic Bag (PNEUMATIC BAG,LIFTING) is a device made of flexible material designed to lift another item by being placed under the item and being inflated with air or some other gas. It will have a means of being connected to an air or gas source and may include a connector hose, a control valve and/or a pressure regulator.
What is a Cable Tie Installation Tool? 22 Items: A Cable Tie Installation Tool (INSTALLATION TOOL,CABLE TIE) is a lightweight, hand-held, hand-operated tool designed to fasten cable ties, straps and the like. Cable tie is inserted into the nose of the tool flush to the cable tie head. Trigger handle tightens cable tie and cuts off any excess. These installation tools are available in a variety of sizes depending on their intended use with miniature, intermediate, standard, heavy or extra heavy cross section ties.
What is a Bearing Staking Installation Tool? 159 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
Wrench Set,Ratchet 15 Items
What is a Sealant Dispenser? 26 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Retaining Ring Pliers Set? 10 Items: A Retaining Ring Pliers Set (PLIERS SET,RETAINING RING) is a group of PLIERS, RETAINING RING having different characteristics.
What is a Hand Armament Subsystem Carrier? 52 Items: A Hand Armament Subsystem Carrier (CARRIER,ARMAMENT SUBSYSTEM,HAND) is a metallic item with a clamp device and/or space for depositing articles. It is used for transporting weapon parts during maintanence and/or repair work, such as gun barrel, automatic loader, breechblock and the like.
What is a Ring Retaining Pliers Tip Set? 13 Items: A Ring Retaining Pliers Tip Set (TIP SET,PLIERS,RING RETAINING) is a collection of removable metallic tips in matched pairs used to provide various size capablities to PLIERS, RING RETAINING which permits the removal and installation of internal and external retaining rings.
What is a Plug Electrical Connector Extractor? 45 Items: A Plug Electrical Connector Extractor (EXTRACTOR,ELECTRICAL CONNECTOR,PLUG) is a hand tool designed to disassemble CONNECTOR, PLUG, ELECTRICAL from a CONNECTOR, RECEPTACLE, ELECTRICAL.
What is a Torque Wrench Adapter Set? 10 Items: A Torque Wrench Adapter Set (ADAPTER SET,TORQUE WRENCH) is tWO or more ADAPTER, TORQUE WRENCH of different sizes.
What is an Electronic Component Inserter And Remover? 79 Items: An Electronic Component Inserter And Remover (INSERTER AND REMOVER,ELECTRONIC COMPONENT) is an item which can insert or remove an electronic component package such as MICROCIRCUIT; RESISTOR, NETWORK (as modified); and the like from its mounting position or socket. Excludes INSERTER AND REMOVER, ELECTRICAL CONTACT; REMOVER, ELECTRICAL CONTACT; EXTRACTOR, ELECTRICAL CARD; EXTRACTOR, ELECTRONIC CRYSTAL UNIT; EXTRACTOR, ELECTRON TUBE.
What is an Impact Type Bit Set And Handle Screwdriver? 14 Items: An Impact Type Bit Set And Handle Screwdriver (SCREWDRIVER,BIT SET AND HANDLE,IMPACT TYPE) is an item consisting of a set of screwdriver bits and a impact driver to accommodate the bits of various types and characteristics. It is designed to transmit a strong rotating movement by the impact of a hammer blowed on the impact driver. It is used to loosen rusted or seized screws. Excludes SCREWDRIVER, BIT SET AND HANDLE.
What is a Hand Vise Jaw? 19 Items: A Hand Vise Jaw (JAW,VISE,HAND) is an item consisting of two opposing parts of a VISE, HAND. The item is moveable and able to open and close. It can hold, grasp or clamp work.
What is a Screwdriver Handle? 28 Items: A Screwdriver Handle (HANDLE,SCREWDRIVER) is an item used to accommodate various types of BIT, SCREWDRIVER. It is designed to rotate a bit that is used for installing or removing screws.
What is a Wire Twister Pliers? 25 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 284 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is a Mechanical Puller Body? 45 Items: A Mechanical Puller Body (BODY,PULLER,MECHANICAL) is an item designed to support and enclose the internal parts of a PULLER,MECHANICAL.
What is a Flat Tip And Cross Tip Screwdriver Set? 39 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is a Socket Wrench Screwdriver Attachment Set? 22 Items: A Socket Wrench Screwdriver Attachment Set (SCREWDRIVER ATTACHMENT SET,SOCKET WRENCH) is a set of screwdriver attachment, socket wrench of different sizes. Items consist of a female square drive on one end to attach to a handle, socket wrench and various screwdriver tip configurations on the opposite end. Excludes SCREWDRIVER ATTACHMENT,SOCKET WRENCH
What is an Oil Filter Wrench? 44 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 430 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Communications Equipment Spring Adjuster? 13 Items: A Communications Equipment Spring Adjuster (ADJUSTER,SPRING,COMMUNICATIONS EQUIPMENT) is a single or double end tool, equipped with slot(s) of various dimensions or with cylindrical rod(s), used for adjusting the springs or spring tensioned parts of electronic equipment.
What is a Rotating Members Aligning Tool? 32 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
What is a Final Drive Assembly Alignment Pin? 41 Items: A Final Drive Assembly Alignment Pin (ALIGNMENT PIN,FINAL DRIVE ASSEMBLY) is a special designed pin used in the assembling of the final drive.
Arm,Handling Tool 77 Items
What is a Splicing Sleeve Compressing Tool? 23 Items: A Splicing Sleeve Compressing Tool (COMPRESSING TOOL,SPLICING SLEEVE) is a hand tool having hinged leverage handles similar to a CUTTER, BOLT or pliers, designed to compress a splicing sleeve when joining the ends of two conductors, or when forming an eye splice in the end of a wire rope. Excludes CRIMPING TOOL, TERMINAL, HAND.
What is a Hand Screw Jack Extension? 14 Items: A Hand Screw Jack Extension (EXTENSION,HAND SCREW JACK) is a length of externally threaded rigid shafting which is the adjustable section of a JACK, SCREW, HAND.
What is a Mechanical Puller Gear Adapter? 21 Items: A Mechanical Puller Gear Adapter (GEAR ADAPTER,PULLER,MECHANICAL) is an adapter that adapts a PULLER,MECHANICAL, to pull a certain gear.
Handle,Hydraulic Jack 18 Items
What is a Female Electrical Contact Resizing Tool? 11 Items: A Female Electrical Contact Resizing Tool (RESIZING TOOL,FEMALE ELECTRICAL CONTACT) is a tool designed to shape to a specific size, female contacts such as those used on electrical connectors, tube sockets, crystal sockets, and pin jacks.
What is a Screwdriver And Socket Wrench Combination? 13 Items: A Screwdriver And Socket Wrench Combination is a hand-tool formed into an integral unit with a socket wrench at one end and a screwdriver bit at the other end. See also SCREWDRIVER AND WRENCH ASSEMBLY.
What is a Hand Hose Fitting Swaging Tool Kit? 11 Items: A Hand Hose Fitting Swaging Tool Kit (SWAGING TOOL KIT,HOSE FITTING,HAND) is a device, hydraulically actuated by hand or power operated pump, consisting of face plate, adapter plate, finger cages, fingers, ram, bushing, and expanding mandrels combined on a single base in various functional arrangements. It is used for swaging the outside diameter of hose assembly fittings, expanding the inside diameter of hose assemblies, and securing the fabrication of hose assemblies. Included are a hand or power operated pump, lubricant, cases, and trays.
What is a Catch Lever Tool? 12 Items: A Catch Lever Tool (LEVER TOOL,CATCH) is a specially designed hand tool which engages the opening and closing lever of a CATCH (as modified) for ease of operation. It is constructed of thin rigid material, usually flat, and one end has an engaging tongue.
What is a Manual Impact Wrench? 11 Items: A Manual Impact Wrench (WRENCH,IMPACT,MANUAL) is a manually operated handheld tool consisting of spring-loaded handle and a power-impact head which delivers a torsional impact from either continuous movement of the handle in one direction, or by a reciprocating action. It is used in tightening and loosening fasteners, such as bolts, nuts, and the like. The item may include sockets, extensions and offset fittings, nut runners, and the like.
What is a Drift? 63 Items: A Drift is an item consisting of a tubular body fitted with replaceable tips. It is designed to insert or remove mechanical components where space is restricted.
What is a Nutdriver? 46 Items: A Nutdriver is a non-powered hand tool with a screwdriver style handle, shaft and formed female hex or square socket at driving end.
What is a Locking Device Removal Tool? 12 Items: A Locking Device Removal Tool (REMOVAL TOOL,LOCKING DEVICE) is a hand tool designed to facilitate the removal of a WASHER, KEY and a LOCKING PLATE, NUT AND BOLT.
What is a Hydraulic Fitting Crimping Tool Head? 26 Items: A Hydraulic Fitting Crimping Tool Head (HEAD,CRIMPING TOOL,HYDRAULIC FITTING) is a component of a crimping tool used to compress fittings on fluid tubes. It consists of a U-shape item, in which, are mounted different sizes of DIE, CRIMPING TOOL for tubes of various diameters.
What is a Torque Screwdriver? 11 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.
What is a Special Purpose Combination Wrench? 13 Items: A Special Purpose Combination Wrench (WRENCH,COMBINATION,SPECIAL PURPOSE) is a tool having a combination of ends and facets. The ends may have open end, box or spanner characteristics. The sides may have features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s). Designed to fit specific items, not sized as standard or metric.
What is a Screwdriver Bit Holder? 56 Items: A Screwdriver Bit Holder (HOLDER,SCREWDRIVER BIT) is an attachment with a socket end for accepting male hexagon shank insert bits and a drive end for adapting to a portable power or hand tool.
What is a Telescoping Pole? 16 Items: A Telescoping Pole (POLE,TELESCOPING) is an item which is designed to be extended or compressed by the sliding of overlapping sections. This item may or may not be able to accommodate an extension.

Stock Items From Supply Class 5120 Page 105 of 110

5120-14-303-9266
Montage Douille Inj

143039266
NO PRIMARY REF14-303-9266: RNCC: 3 | RNVC: 2
0DH2424: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-409-0565
Socket Wrench Socket

144090565
72466: RNCC: 3 | RNVC: 2

16 Apr 1986

5120-14-472-4748
Socket Head Screw Key

144724748
83SH.5: RNCC: 3 | RNVC: 2
83SH.5: RNCC: 5 | RNVC: 2
3148511238165: RNCC: 5 | RNVC: 2
1092374K00: RNCC: 5 | RNVC: 2
18590740-9: RNCC: 5 | RNVC: 2
91777975: RNCC: 5 | RNVC: 2
235-2763: RNCC: 5 | RNVC: 2
0715 311 51: RNCC: 5 | RNVC: 2
0123816: RNCC: 5 | RNVC: 9
FACOM83SH.5: RNCC: 5 | RNVC: 9

26 Oct 1994

5120-14-423-2827
Magnetic Retrieving Tool

144232827
579-2: RNCC: 3 | RNVC: 9
91616476: RNCC: 5 | RNVC: 2
MUL579-2: RNCC: 5 | RNVC: 9

14 Apr 1988

5120-14-228-7867

5120-14-323-5471
Torque Wrench Adapter

143235471
M02009: RNCC: 3 | RNVC: 2
0000331079: RNCC: 5 | RNVC: 2
0000331079: RNCC: 5 | RNVC: 9
331079: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-535-5932
Spanner Wrench

145355932
904 200 540: RNCC: 3 | RNVC: 2

4 Jun 2003

5120-14-520-7029
Detent Handling Tool

145207029
8819375000: RNCC: 3 | RNVC: 2

31 May 2000

5120-14-421-6310
Socket Wrench Crowfoot Attachment

144216310
210109: RNCC: 3 | RNVC: 2

20 Jan 1988

5120-14-504-0004
Spanner Wrench

145040004
125.A50: RNCC: 3 | RNVC: 2
125A.50: RNCC: 3 | RNVC: 2
134655: RNCC: 5 | RNVC: 2
3148511346556: RNCC: 5 | RNVC: 2

4 Feb 1998

5120-14-540-5682
Socket Wrench Extension

145405682
309341: RNCC: 3 | RNVC: 2

6 Apr 2004

5120-14-346-4621
Tap And Reamer Wrench

143464621
830A.5L: RNCC: 3 | RNVC: 2
383-1: RNCC: 3 | RNVC: 2
3272670232914: RNCC: 5 | RNVC: 2
0206420: RNCC: 5 | RNVC: 2
3145812064190: RNCC: 5 | RNVC: 2
830-5L: RNCC: 5 | RNVC: 2
830.5L: RNCC: 5 | RNVC: 2
11100310003: RNCC: 5 | RNVC: 2
81100310003: RNCC: 5 | RNVC: 9

12 Dec 1977

5120-14-345-5519
Capuchon Outil Mont

143455519
P3 1-2T1: RNCC: 3 | RNVC: 2
85-689-2507: RNCC: 6 | RNVC: 9

5 Oct 1977

5120-14-226-8007
Electrical Contact Remover

142268007
M15515-20: RNCC: 3 | RNVC: 2
9M15515-20: RNCC: 5 | RNVC: 2
M15515-20: RNCC: 5 | RNVC: 9

1 Jan 1966

5120-14-218-1833
Spanner Wrench

142181833
17-9-147: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-382-0807
Screwdriver Bit

143820807
SDM244: RNCC: 3 | RNVC: 2
85-692-2906: RNCC: 6 | RNVC: 9

25 Jan 1983

5120-14-413-5824
Socket Head Screw Key

144135824
803-4: RNCC: 3 | RNVC: 2
80304: RNCC: 5 | RNVC: 2
803-4: RNCC: 5 | RNVC: 2

17 Dec 1986

5120-14-406-6404
Extraction Outil

144066404
OUT9331: RNCC: 3 | RNVC: 2
0UT9331: RNCC: 5 | RNVC: 2

8 Jan 1986

5120-14-348-1785
Spanner Wrench

143481785
8812867000: RNCC: 3 | RNVC: 2

29 Mar 1978

5120-14-386-4854
Vise Jaw Caps

143864854
C47710: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-518-7157
Spanner Wrench

145187157
202406006050: RNCC: 3 | RNVC: 2

16 Feb 2000

5120-14-375-1789
Spanner Wrench

143751789
16380386: RNCC: 3 | RNVC: 2
16380386: RNCC: 5 | RNVC: 9

26 Feb 1982

5120-14-441-9967
Bearing And Bushing Inserter And Remover

144419967
177115: RNCC: 3 | RNVC: 2

26 Sep 1990

5120-14-527-2887
Detent Handling Tool

145272887
0621142MECAF05: RNCC: 3 | RNVC: 9
SYQ0457: RNCC: 5 | RNVC: 2

18 Oct 2001

5120-14-378-5133
Jet De Montage

143785133
6801J32-1662-00: RNCC: 3 | RNVC: 2
6801360A32-1662-00: RNCC: 5 | RNVC: 2

11 Aug 1982

5120-14-291-8147
Socket Wrench Socket

142918147
NO PRIMARY REF14-291-8147: RNCC: 3 | RNVC: 2
S.29L: RNCC: 5 | RNVC: 2
S29L: RNCC: 5 | RNVC: 2
0183479T00: RNCC: 5 | RNVC: 2
0055470: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-302-7735
Socket Wrench Adapter

143027735
J.235: RNCC: 3 | RNVC: 2
J235: RNCC: 5 | RNVC: 2
0122206X00: RNCC: 5 | RNVC: 2
91367196: RNCC: 5 | RNVC: 2
J.235: RNCC: 5 | RNVC: 2
3148510290201: RNCC: 5 | RNVC: 2
0029020: RNCC: 5 | RNVC: 9
85-681-3260: RNCC: 6 | RNVC: 9

1 Jan 1973

5120-14-285-4449
Open End Wrench

142854449
34.3,2: RNCC: 3 | RNVC: 2
3148510980003: RNCC: 5 | RNVC: 2
34-3-2: RNCC: 5 | RNVC: 2
7187M3-2: RNCC: 5 | RNVC: 2
0098000: RNCC: 5 | RNVC: 9
85-691-5205: RNCC: 6 | RNVC: 9

1 Jan 1972

5120-14-309-0510
Cle Ecrou Palier Av

143090510
8810240000: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-363-6032

5120-14-214-3288
Socket Wrench Socket

142143288
J.17: RNCC: 3 | RNVC: 2
3148510272108: RNCC: 5 | RNVC: 2
J17: RNCC: 5 | RNVC: 2
0110977X00: RNCC: 5 | RNVC: 2
91352504: RNCC: 5 | RNVC: 2
CAE00914: RNCC: 5 | RNVC: 2
0027210: RNCC: 5 | RNVC: 9
00-134-5102: RNCC: 6 | RNVC: 9

1 Jan 1965

5120-14-528-0655
Screwdriver Bit

145280655
888-513-500-1: RNCC: 3 | RNVC: 2

12 Dec 2001

5120-14-385-9821
Spanner Wrench

143859821
0.411/60124: RNCC: 3 | RNVC: 2
0411-60124: RNCC: 5 | RNVC: 2

24 Aug 1983

5120-14-528-4675
Face Spanner Wrench Socket

145284675
888-466-300-1: RNCC: 3 | RNVC: 2
888-466-300-1: RNCC: 5 | RNVC: 2

30 Jan 2002

5120-14-303-6276

5120-14-285-1216

5120-14-343-1831
Pose Filet Rapp Nez

143431831
01500612932: RNCC: 3 | RNVC: 2
01556127021: RNCC: 5 | RNVC: 2

16 Jun 1977

5120-14-573-3415
Screwdriver Bit Holder

145733415
18.18: RNCC: 3 | RNVC: 2

5 Oct 2012

5120-14-397-4846
Gabarit De Cintrage

143974846
73011030: RNCC: 3 | RNVC: 2
73011033: RNCC: 5 | RNVC: 2
R073011033: RNCC: 5 | RNVC: 2
91710791: RNCC: 5 | RNVC: 2

14 Dec 1984

5120-14-201-8791

5120-14-305-6679

5120-14-375-0523
Cle A Panier

143750523
GSM196-010F7: RNCC: 3 | RNVC: 2

30 Jan 1982

5120-14-404-9220
Outillage Mallette

144049220
853-201-551-0: RNCC: 3 | RNVC: 2

20 Nov 1985

5120-14-323-4466
Tarage Faux Ecrou

143234466
M16-027: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-271-8959
Guide Demmanchement

142718959
3160-95-12-500: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-574-3893
Hand Vise Jaw

145743893
4420-02: RNCC: 3 | RNVC: 2

15 Jan 2013

5120-14-329-3073
Cle A Panier

143293073
GSM196-010F73: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-450-5786
Socket Wrench Socket

144505786
26145001816: RNCC: 3 | RNVC: 2
362667-00: RNCC: 5 | RNVC: 2
41001816: RNCC: 5 | RNVC: 2
SYQ6099: RNCC: 5 | RNVC: 2

9 Oct 1991

5120-14-227-8928
Open End Wrench

142278928
35-209: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-329-8845
Spanner Wrench

143298845
3511 130 89681: RNCC: 3 | RNVC: 2
3511-130-89681: RNCC: 5 | RNVC: 2

2 Jul 1975

5120-14-539-8249
Spanner Wrench

145398249
MC0006-15: RNCC: 3 | RNVC: 2

11 Feb 2004

5120-14-500-9861
Cle

145009861
E03-4312: RNCC: 3 | RNVC: 2
F300 0T 025 0074: RNCC: 6 | RNVC: 9

29 Oct 1997

5120-14-562-4501
Socket Head Screw Key

145624501
14100050306: RNCC: 3 | RNVC: 2

26 Oct 2009

5120-14-353-3504
Outil Presse Ressor

143533504
RT17275: RNCC: 3 | RNVC: 2
85-689-9164: RNCC: 6 | RNVC: 9

8 Dec 1978

5120-14-314-4049
Cle Joint Objectif

143144049
3511-961-61451: RNCC: 3 | RNVC: 2
3511 961 61451: RNCC: 5 | RNVC: 2
MQ16145: RNCC: 5 | RNVC: 2

1 Jan 1974

5120-14-404-1031

5120-14-425-1805
Calibre Coupe Cames

144251805
02640904200: RNCC: 3 | RNVC: 2
010109: RNCC: 5 | RNVC: 1
026409042: RNCC: 5 | RNVC: 2

24 Jun 1988

5120-14-255-2713
Bride Dextraction

142552713
162B: RNCC: 3 | RNVC: 2
0001079200: RNCC: 5 | RNVC: 2
BTR02: RNCC: 5 | RNVC: 2

1 Jan 1969

5120-14-337-0923
Typewriter Repair Pliers

143370923
16401660-1: RNCC: 3 | RNVC: 2
160-394-16401660: RNCC: 5 | RNVC: 2
160-39A16401660: RNCC: 5 | RNVC: 2
16400165: RNCC: 5 | RNVC: 2
16400165-5: RNCC: 5 | RNVC: 2
16401660: RNCC: 5 | RNVC: 2
HK1-125: RNCC: 5 | RNVC: 2

7 Oct 1976

5120-14-466-7887
Socket Head Screw Key

144667887
8-42: RNCC: 3 | RNVC: 2
RAB2225: RNCC: 5 | RNVC: 2
70151519: RNCC: 5 | RNVC: 2
70151519: RNCC: 5 | RNVC: 9

26 Nov 1993

5120-14-568-5253
Torque Wrench

145685253
DYSM-200-0: RNCC: 3 | RNVC: 2

10 Jun 2011

5120-14-450-7475
Flat Tip Screwdriver

144507475
NO PRIMARY REF14-450-7475: RNCC: 3 | RNVC: 2
641050: RNCC: 5 | RNVC: 9
EI.2,5X50: RNCC: 5 | RNVC: 9

22 Oct 1991

5120-14-567-2631
Torque Wrench

145672631
DYSM-200-2: RNCC: 3 | RNVC: 2

28 Feb 2011

5120-14-265-4740
Open End Wrench

142654740
HK1-24: RNCC: 3 | RNVC: 2
16401109: RNCC: 5 | RNVC: 2
16401109-9: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-501-0651
Bearing And Bushing Remover

145010651
NO PRIMARY REF14-501-0651: RNCC: 3 | RNVC: 2
3148510702469: RNCC: 5 | RNVC: 2
U-49D9: RNCC: 5 | RNVC: 9
U.49D9: RNCC: 5 | RNVC: 9
U49D9: RNCC: 5 | RNVC: 9
F300 0T 025 0983: RNCC: 6 | RNVC: 9

29 Oct 1997

5120-14-325-4482
Socket Wrench Handle Bar

143254482
99250500082: RNCC: 3 | RNVC: 2
99-250-50-008-2: RNCC: 5 | RNVC: 2

2 Jul 1975

5120-14-556-9816
Woven Cable Grip

145569816
78000226: RNCC: 3 | RNVC: 2

25 Apr 2008

5120-14-573-5529
Drift

145735529
703A93-7500-33: RNCC: 3 | RNVC: 2
703A93750033: RNCC: 5 | RNVC: 2

22 Oct 2012

5120-14-395-0760
Dexpansion Cone

143950760
H46670: RNCC: 3 | RNVC: 2

2 Oct 1984

5120-14-292-8292

5120-14-287-5482

5120-14-574-2409
Socket Head Screw Key

145742409
89S.45: RNCC: 3 | RNVC: 2
126982: RNCC: 5 | RNVC: 2
3148511269824: RNCC: 5 | RNVC: 2

18 Dec 2012

5120-14-200-3029

5120-14-226-3738

5120-14-318-6456
Montage Gar Mandrin

143186456
M0N20514: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-348-9595
Sertissage Poincon

143489595
2074HHC2: RNCC: 3 | RNVC: 2

19 Apr 1978

5120-14-416-0098
Poignee Manoeuvre

144160098
GSM171116F6ET7: RNCC: 3 | RNVC: 2

1 Jun 1987

5120-14-558-0427
Cross Tip Screwdriver

145580427
ANP1X35: RNCC: 3 | RNVC: 2
3148517735309: RNCC: 5 | RNVC: 2
773530: RNCC: 5 | RNVC: 2
91883655: RNCC: 5 | RNVC: 2
AA024800: RNCC: 6 | RNVC: 9

25 Aug 2008

5120-14-444-3190
Combination Box And Open End Box Wrench

144443190
GS130-05: RNCC: 3 | RNVC: 2

7 Jan 1991

5120-14-258-7758
Arbre De Montage

142587758
FH137-932: RNCC: 3 | RNVC: 2

1 Jan 1969

5120-14-363-2200
Jet Creux Demmanche

143632200
3160S95-63-115: RNCC: 3 | RNVC: 2
GPLV87-33: RNCC: 5 | RNVC: 2
85-689-8101: RNCC: 6 | RNVC: 9

3 Apr 1980

5120-14-204-9561
Flat Tip Screwdriver

142049561
250-10: RNCC: 3 | RNVC: 2
250.10: RNCC: 3 | RNVC: 2
3272670222694: RNCC: 5 | RNVC: 2
1162-200X10: RNCC: 5 | RNVC: 2
1162-10-200: RNCC: 5 | RNVC: 9

1 Jan 1963

5120-14-319-4062
Screwdriver Bit

143194062
0025016: RNCC: 3 | RNVC: 2
NET3-16: RNCC: 3 | RNVC: 2
ET.103/16: RNCC: 5 | RNVC: 2
ET3-16: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-449-9245
Spanner Wrench

144499245
7062RUF1-1-DN80-ACIER304L: RNCC: 3 | RNVC: 9

16 Sep 1991

5120-14-212-9119
Poignee De Maintien

142129119
9970-111-023: RNCC: 3 | RNVC: 2
9970-111-023-01: RNCC: 3 | RNVC: 2

1 Jan 1964

5120-14-577-1887
Torque Wrench

145771887
DYTF-100-1: RNCC: 3 | RNVC: 2

21 Aug 2013

5120-14-572-3643
Machining Drill Jig

145723643
849-0-02-005: RNCC: 3 | RNVC: 2

28 Jun 2012

5120-14-329-6323
Spanner Wrench

143296323
M31-042: RNCC: 3 | RNVC: 2
M31-042: RNCC: 5 | RNVC: 9

2 Jul 1975

5120-14-527-2896
Socket Wrench Screwdriver Attachment

145272896
ENFD6519-D26X85: RNCC: 3 | RNVC: 2

19 Oct 2001

5120-14-351-5035
Face Spanner Wrench Socket

143515035
489331G: RNCC: 3 | RNVC: 2

12 Sep 1978

5120-14-399-3391
Face Spanner Wrench Socket

143993391
46AM031: RNCC: 3 | RNVC: 2

6 Mar 1985

5120-14-457-2868
Bearing And Bushing Inserter

144572868
BLC23071: RNCC: 3 | RNVC: 2
30-0958: RNCC: 5 | RNVC: 2

20 Aug 1992

5120-14-300-0657
Open End Wrench

143000657
44S13X17: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-204-3036
Broche Speciale

142043036
M3-038: RNCC: 3 | RNVC: 2
M3-038: RNCC: 5 | RNVC: 9

1 Jan 1963

5120-14-416-1217
Adjustable Wrench

144161217
564-10: RNCC: 3 | RNVC: 9
564CP-10: RNCC: 5 | RNVC: 9
DEM564-10: RNCC: 5 | RNVC: 9

3 Jun 1987

5120-14-274-8684
Bague De Cone

142748684
33536A: RNCC: 3 | RNVC: 2
R31674-18-18R38: RNCC: 5 | RNVC: 2
33536: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-243-3070
Bloc De Pre-Sertiss

142433070
NT89-90: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-416-7652
Positionnemen Outil

144167652
540475: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-417-4881
Daxe Extracteur

144174881
46AM096: RNCC: 3 | RNVC: 2

8 Jul 1987

5120-14-561-4292
Screw Thread Insert Inserter

145614292
64772: RNCC: 3 | RNVC: 2

16 Jul 2009

5120-14-428-5830
A Ergots Douille

144285830
46AM104-00-0002: RNCC: 3 | RNVC: 2

8 Dec 1988

5120-14-239-4183
Adjustable Wrench

142394183
A10-95-914-04-0: RNCC: 3 | RNVC: 2
A10-95-914-04-0: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-255-9678
Cambreur Fente

142559678
NO PRIMARY REF14-255-9678: RNCC: 3 | RNVC: 2
1307-3: RNCC: 5 | RNVC: 9

1 Jan 1969

5120-14-298-4780
Cross Tip Screwdriver

142984780
APB.2X40: RNCC: 3 | RNVC: 2
APB2X40: RNCC: 5 | RNVC: 2
91379264: RNCC: 5 | RNVC: 2
91767905: RNCC: 5 | RNVC: 2
3148510091402: RNCC: 5 | RNVC: 2
0009140: RNCC: 5 | RNVC: 9
APB2: RNCC: 5 | RNVC: 9
APB.2: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-571-3057
Cross Tip Screwdriver

145713057
ANP4X200: RNCC: 3 | RNVC: 2
FACOM ANP4X200: RNCC: 5 | RNVC: 2

12 Mar 2012

5120-14-285-4605

5120-14-274-1063
Spanner Wrench

142741063
8810267001: RNCC: 3 | RNVC: 2
800-02-427-10: RNCC: 5 | RNVC: 2
8000242710: RNCC: 5 | RNVC: 2
881-0-267-001: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-528-6662
Detent Handling Tool

145286662
M40/511/2.340.21418/REP9703: RNCC: 3 | RNVC: 2
M40/511/2.340.21418/REP9703: RNCC: 3 | RNVC: 2
9703-M40: RNCC: 5 | RNVC: 2
1E84RE236G201935: RNCC: 6 | RNVC: 9

4 Feb 2002

5120-14-274-8693
Extenseur Ensemble

142748693
R31674-12-18R32: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-371-2997
Palie Joint Mandrin

143712997
0001326202: RNCC: 3 | RNVC: 2
M0T131-02: RNCC: 5 | RNVC: 2

5 Aug 1981

5120-14-488-6840
Special Tournevis

144886840
257079150: RNCC: 3 | RNVC: 2

28 May 1997

5120-14-428-5337
Essai Cloche

144285337
MKA4492101: RNCC: 3 | RNVC: 2

8 Dec 1988

5120-14-573-9444
Flat Tip Screwdriver

145739444
14220404R: RNCC: 3 | RNVC: 2
14220404R: RNCC: 5 | RNVC: 2
14220404R: RNCC: 5 | RNVC: 2

22 Nov 2012

5120-14-370-3288
Mandrin Guid Soupap

143703288
5000261110: RNCC: 3 | RNVC: 2
5000261110: RNCC: 5 | RNVC: 9

18 May 1981

5120-14-302-6662

5120-14-220-2492
Electron Tube Extractor

142202492
NO PRIMARY REF14-220-2492: RNCC: 3 | RNVC: 2
22995: RNCC: 5 | RNVC: 9
22995: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-425-9486
Mechanical Puller Attachment

144259486
4632: RNCC: 3 | RNVC: 2

28 Jul 1988

5120-14-426-8275
Socket Head Screw Key

144268275
0419-40026: RNCC: 3 | RNVC: 2

23 Sep 1988

5120-14-481-1788
Socket Wrench Socket

144811788
16106877: RNCC: 3 | RNVC: 2

25 Apr 1996

5120-14-215-1650
Spanner Wrench

142151650
11356: RNCC: 3 | RNVC: 2
105100: RNCC: 3 | RNVC: 2
13167: RNCC: 5 | RNVC: 2
100: RNCC: 5 | RNVC: 2
11356: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-552-1943
Socket Wrench Screwdriver Attachment

145521943
STM.6: RNCC: 3 | RNVC: 2
STM.6: RNCC: 5 | RNVC: 2

1 Dec 2006

5120-14-503-5841
Socket Wrench Socket

145035841
J.10LVSE: RNCC: 3 | RNVC: 2
3148510275857: RNCC: 5 | RNVC: 2
0027585: RNCC: 5 | RNVC: 9

21 Jan 1998

5120-14-231-8239
Extracteur Palier D

142318239
9970-121-022: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-374-0896
Montage Outil

143740896
MMG047-71: RNCC: 3 | RNVC: 2

8 Dec 1981

5120-14-217-9997
Bouchon Capacite Ou

142179997
NO PRIMARY REF14-217-9997: RNCC: 3 | RNVC: 2
22860E: RNCC: 5 | RNVC: 9
22860E: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-503-5740
Detent Handling Tool

145035740
MGD104-22: RNCC: 3 | RNVC: 2

21 Jan 1998

5120-14-285-6253

5120-14-251-6417

5120-14-546-6346
Entret Demonte-Pneu

145466346
RP-42800: RNCC: 3 | RNVC: 2

21 Jul 2005

5120-14-414-8493

5120-14-353-0683

5120-14-406-6351
Arret Butee

144066351
851-200-143-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-361-1410
Cle Speciale

143611410
NO PRIMARY REF14-361-1410: RNCC: 3 | RNVC: 2
030504: RNCC: 5 | RNVC: 9

24 Jan 1980

5120-14-492-5438
Cle

144925438
NO PRIMARY REF14-492-5438: RNCC: 3 | RNVC: 2
5000918865: RNCC: 5 | RNVC: 9
F300 0T 007 9252: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-326-1727
Spanner Wrench

143261727
2-73299: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-271-6081
Open End Wrench

142716081
69-29: RNCC: 3 | RNVC: 2
4062-29: RNCC: 3 | RNVC: 9
E74301C29WWF: RNCC: 5 | RNVC: 1
69.29: RNCC: 5 | RNVC: 2
91601112: RNCC: 5 | RNVC: 2
69-29: RNCC: 5 | RNVC: 9

1 Jan 1970

5120-14-292-7481
Torque Wrench Adapter

142927481
DC-2-3/8: RNCC: 3 | RNVC: 2
DC2 3-8: RNCC: 3 | RNVC: 2
DC2 3-8: RNCC: 5 | RNVC: 2
3272670263970: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-415-0250
Outil Vissage Ecrou

144150250
65-3-01-045G00-626318C: RNCC: 3 | RNVC: 2
0413799X00: RNCC: 5 | RNVC: 2
045G00-413799X: RNCC: 5 | RNVC: 2
413799X: RNCC: 5 | RNVC: 2
91572538: RNCC: 5 | RNVC: 2

26 Mar 1987

5120-14-477-8223
Flat Tip Screwdriver

144778223
974-016445-90: RNCC: 3 | RNVC: 2

27 Sep 1995

5120-14-330-7068
Bloquage Arbre Cle

143307068
BR4X529BIS: RNCC: 3 | RNVC: 2
4X529BIS: RNCC: 5 | RNVC: 2
85-100-4937: RNCC: 6 | RNVC: 9

2 Jul 1975

5120-14-239-9246
Cle Pour Ecrou De B

142399246
3210-95-33-030A: RNCC: 3 | RNVC: 2
3210-95-33-030: RNCC: 5 | RNVC: 2
3270-35000-011M: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-572-3595
Combination Box And Open End Wrench

145723595
440.7/16: RNCC: 3 | RNVC: 2
3148517682986: RNCC: 5 | RNVC: 2
768298: RNCC: 5 | RNVC: 2

27 Jun 2012

5120-14-231-8225
Cle Speciale Pour V

142318225
9970-111-106: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-446-3127
Plaque Guidage

144463127
VTR401-2-10625: RNCC: 3 | RNVC: 2

13 Mar 1991

5120-14-418-1435
Open End Wrench

144181435
70-32X36: RNCC: 3 | RNVC: 2
3272670259492: RNCC: 5 | RNVC: 2

6 Aug 1987

5120-14-408-9613

5120-14-412-5885

5120-14-528-7269
Spanner Wrench

145287269
815-1-99-122: RNCC: 3 | RNVC: 2

6 Feb 2002

5120-14-352-5454
Open End Wrench

143525454
MH056-21-00: RNCC: 3 | RNVC: 2
MH056-21-00: RNCC: 5 | RNVC: 2

16 Oct 1978

5120-14-345-3102
Hand Crank

143453102
M31-104: RNCC: 3 | RNVC: 2
M31104: RNCC: 5 | RNVC: 2
M31-104: RNCC: 5 | RNVC: 9

5 Oct 1977

5120-14-311-4517

5120-14-355-9424
Electrical Contact Inserter And Remover

143559424
001100 230 00: RNCC: 3 | RNVC: 2
001100-230-00: RNCC: 5 | RNVC: 2
00110023000: RNCC: 5 | RNVC: 2
110003020: RNCC: 5 | RNVC: 2

5 Apr 1979

5120-14-222-7131
Open End Wrench

142227131
34.14: RNCC: 3 | RNVC: 2
35-14X14: RNCC: 3 | RNVC: 2
3148510981406: RNCC: 5 | RNVC: 2
34-14: RNCC: 5 | RNVC: 2
0182113X00: RNCC: 5 | RNVC: 2
479942B: RNCC: 5 | RNVC: 2
91364593: RNCC: 5 | RNVC: 2
0098140: RNCC: 5 | RNVC: 9

1 Jan 1966

5120-14-237-4667
Cle Speciale

142374667
3130S95-62-015: RNCC: 3 | RNVC: 2
3130-95-62-015: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-500-9865
Cle

145009865
E03-4308: RNCC: 3 | RNVC: 2
F300 0T 025 0078: RNCC: 6 | RNVC: 9

29 Oct 1997

5120-14-507-7588

5120-14-415-0711
Cle Speciale

5120-14-492-8204
Cle

5120-14-385-9792
Spanner Wrench

143859792
0.411/60139: RNCC: 3 | RNVC: 2
0411-60139: RNCC: 5 | RNVC: 2

24 Aug 1983

5120-14-447-3421
Socket Head Screw Key

144473421
NO PRIMARY REF14-447-3421: RNCC: 3 | RNVC: 2
0124890: RNCC: 5 | RNVC: 2
84-1-5: RNCC: 5 | RNVC: 2
84.1,5: RNCC: 5 | RNVC: 2
18509454-1: RNCC: 5 | RNVC: 2
91714533: RNCC: 5 | RNVC: 2

15 May 1991

5120-14-212-9124
Cle A Oeil Speciale

142129124
9970-115-213: RNCC: 3 | RNVC: 2
9970-115-213-01: RNCC: 3 | RNVC: 2

1 Jan 1964

5120-14-366-8476
De Centrage Obus

143668476
30MS089-0000004: RNCC: 3 | RNVC: 2

20 Nov 1980

5120-14-366-7042
Tube A Tenons Cle

143667042
RA82-78: RNCC: 3 | RNVC: 2
RA82: RNCC: 5 | RNVC: 2
85-691-1389: RNCC: 6 | RNVC: 9

20 Nov 1980

5120-14-513-7361
Flat Tip Screwdriver

145137361
ENFD6561-0-8X4X100: RNCC: 3 | RNVC: 2

9 Apr 1999

5120-14-478-2005
Spanner Wrench

144782005
702-400184.8/N1600: RNCC: 3 | RNVC: 9
702-400184.8: RNCC: 5 | RNVC: 2

16 Oct 1995

5120-14-440-2089
Socket Head Screw Key

144402089
16-7-3314: RNCC: 3 | RNVC: 2
16.7.3314: RNCC: 5 | RNVC: 2

11 Jul 1990

5120-14-396-4133
Pince De Retouche

143964133
6274-51024: RNCC: 3 | RNVC: 2
6274-2712420: RNCC: 5 | RNVC: 2

27 Nov 1984

5120-14-315-1861
Mechanical Puller Attachment

143151861
0-63965-3: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-539-9503
Automotive Trim Removal Tool

145399503
D.115A: RNCC: 3 | RNVC: 2

25 Feb 2004

5120-14-237-4722
Detent Handling Tool

142374722
3130S95-90-002-2: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-459-6437
Cle Speciale

144596437
312-00031-001-W26H2: RNCC: 3 | RNVC: 2

10 Dec 1992

5120-14-443-8021
Flasque Darret

144438021
D12504-040-03: RNCC: 3 | RNVC: 2

5 Dec 1990

5120-14-200-4437
Socket Wrench Socket

142004437
K.23A: RNCC: 3 | RNVC: 2
C-23: RNCC: 3 | RNVC: 2
C23: RNCC: 3 | RNVC: 2
K23: RNCC: 3 | RNVC: 9
3148510292151: RNCC: 5 | RNVC: 2
3272670299573: RNCC: 5 | RNVC: 2
K23: RNCC: 5 | RNVC: 9
56400030: RNCC: 5 | RNVC: 9
DEMK23: RNCC: 5 | RNVC: 9
0029215: RNCC: 5 | RNVC: 9

1 Jan 1962

5120-14-392-7299
Spanner Wrench

143927299
0-408-52-017: RNCC: 3 | RNVC: 2
0408-52017: RNCC: 5 | RNVC: 2

7 Apr 1984

5120-14-209-5401
Cle Speciale Pour R

142095401
9970-125-010-00: RNCC: 3 | RNVC: 2
9970-125-010: RNCC: 3 | RNVC: 2

1 Jan 1964

5120-14-370-8414
Jeu Mastic Couteaux

143708414
NO PRIMARY REF14-370-8414: RNCC: 3 | RNVC: 2
130510: RNCC: 5 | RNVC: 2
C0P114: RNCC: 5 | RNVC: 9

5 Jun 1981

5120-14-329-6321
Depose Filtre Cle

143296321
M31-040: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-362-5526
Hand Blind Riveter

143625526
NO PRIMARY REF14-362-5526: RNCC: 3 | RNVC: 2
101856: RNCC: 5 | RNVC: 2
KF51: RNCC: 5 | RNVC: 9
KF60: RNCC: 5 | RNVC: 9

19 Mar 1980

5120-14-319-6877
Socket Wrench Crowfoot Attachment

143196877
G1-15-626: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-556-1999
Screwdriver Bit

145561999
14-1300-0160-01: RNCC: 3 | RNVC: 2
14-1300-0160-01: RNCC: 5 | RNVC: 2

11 Feb 2008

5120-14-371-4261
Spanner Wrench

143714261
6254-57034: RNCC: 3 | RNVC: 2

5 Aug 1981

5120-14-401-5672
Btp Lot Obturateurs

144015672
355A96-3240-00: RNCC: 3 | RNVC: 2

13 Jun 1985

5120-14-428-7134
Socket Wrench Screwdriver Attachment

144287134
RT.10: RNCC: 3 | RNVC: 2
3148515142000: RNCC: 5 | RNVC: 2
TVA5120-2-263-037-1.1.10: RNCC: 5 | RNVC: 2
0514200: RNCC: 5 | RNVC: 9

13 Dec 1988

5120-14-410-0520
Liaison Douille

144100520
851-200-153-0: RNCC: 3 | RNVC: 2

4 Jun 1986

5120-14-378-8441
Controle Bague

143788441
UJD232-48: RNCC: 3 | RNVC: 2
UJD232-48: RNCC: 5 | RNVC: 2

11 Aug 1982

5120-14-265-6012
Cle Demonte Chapeau

142656012
GM1000000CLE0CT0G0NALE90MM: RNCC: 2 | RNVC: 2
NO PRIMARY REF14-265-6012: RNCC: 3 | RNVC: 2
GM1000000CLE0CT0G0NALE90MM: RNCC: 5 | RNVC: 9

1 Jan 1970

5120-14-442-1515
Serre Toles Outil

144421515
853-600-247-6: RNCC: 3 | RNVC: 2

3 Oct 1990

5120-14-401-5643
Cimblot Emmanc Join

144015643
350A93-3317-20: RNCC: 3 | RNVC: 2

13 Jun 1985

5120-14-470-1527
Bague Emmanche

144701527
853-620-046-0: RNCC: 3 | RNVC: 2

1 Jun 1994

5120-14-498-0844
Wrench

144980844
NO PRIMARY REF14-498-0844: RNCC: 3 | RNVC: 2
2 694 900: RNCC: 5 | RNVC: 9
2 694 900: RNCC: 5 | RNVC: 9
F300 0T 002 6411: RNCC: 6 | RNVC: 9

29 Oct 1997

5120-14-220-5159
Obus Demmanchement

142205159
3160S95-33-060: RNCC: 3 | RNVC: 2
3160-95-33-060: RNCC: 5 | RNVC: 2

1 Jan 1965

5120-14-356-5967
Spanner Wrench

143565967
TF10A32510: RNCC: 3 | RNVC: 2
85-688-6568: RNCC: 6 | RNVC: 9

15 May 1979

5120-14-484-3402
Retaining Ring Pliers

144843402
197G.13: RNCC: 3 | RNVC: 2
NF E73-130: RNCC: 4 | RNVC: 1
3059001422: RNCC: 5 | RNVC: 2
3148511457016: RNCC: 5 | RNVC: 2
0145701: RNCC: 5 | RNVC: 9

13 Nov 1996

5120-14-423-2300
Ens Vis De Poussee

144232300
0747182: RNCC: 3 | RNVC: 2
SP.1735 D-12: RNCC: 5 | RNVC: 2
SP1735D-12: RNCC: 5 | RNVC: 2

13 Apr 1988

5120-14-400-6619
Valve Spring Lifter

144006619
7-010368-9: RNCC: 3 | RNVC: 2
7-010368-9: RNCC: 5 | RNVC: 9

8 May 1985

5120-14-392-0844
Couvercl Extracteur

143920844
853-121-004-0: RNCC: 3 | RNVC: 2

21 Mar 1984

5120-14-563-7230
Seal Remover

145637230
119770-01130: RNCC: 3 | RNVC: 2
119770-01130: RNCC: 3 | RNVC: 2

9 Mar 2010

5120-14-382-7236
Graissage Montage

143827236
MF053-24-00: RNCC: 3 | RNVC: 2
MF053-24-00: RNCC: 5 | RNVC: 2
85-692-1831: RNCC: 6 | RNVC: 9

17 Feb 1983

5120-14-362-7864
Spanner Wrench

143627864
C47829: RNCC: 3 | RNVC: 2
85-691-0781: RNCC: 6 | RNVC: 9

19 Mar 1980

5120-14-546-1997
Face Spanner Wrench Socket

145461997
480080S120-01A: RNCC: 3 | RNVC: 2

15 Jun 2005

5120-14-201-3944
Flat Tip Screwdriver

142013944
821-250X5: RNCC: 3 | RNVC: 9

1 Jan 1962

5120-14-443-9731
Open End Wrench

144439731
GS120-07: RNCC: 3 | RNVC: 2

18 Dec 1990

5120-14-325-3150
Hand Contact Burnisher

143253150
98340: RNCC: 3 | RNVC: 2
98340: RNCC: 5 | RNVC: 9
98340: RNCC: 5 | RNVC: 9
85-686-1618: RNCC: 6 | RNVC: 9

2 Jul 1975

5120-14-527-6480
Socket Wrench Screwdriver Attachment

145276480
888-484-200-1: RNCC: 3 | RNVC: 2

7 Nov 2001

5120-14-352-8481
Spanner Wrench

143528481
21571: RNCC: 3 | RNVC: 2
25-021571-0: RNCC: 5 | RNVC: 2

14 Nov 1978

5120-14-320-0749
Torque Wrench Adapter

143200749
99250450361: RNCC: 3 | RNVC: 2
D-36: RNCC: 3 | RNVC: 2
99-250-45-036-1: RNCC: 5 | RNVC: 2
GESM827550: RNCC: 5 | RNVC: 2
3272670303263: RNCC: 5 | RNVC: 2
D36: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-355-5485
Machoire

143555485
HE688-3873: RNCC: 3 | RNVC: 2
558-2-01071: RNCC: 5 | RNVC: 9

19 Mar 1979

5120-14-319-4521
Plaque Dappui E Tra

143194521
3130S95-47-008: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-314-9767
Cle A Tube

143149767
100A501184: RNCC: 3 | RNVC: 2
100A501184: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-241-1514
Cle A Ergots Specia

142411514
0767-78: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-378-5537
Table Montage Roue

143785537
6803J32-3004-03: RNCC: 3 | RNVC: 2
6803360A32-3004-03: RNCC: 5 | RNVC: 2

11 Aug 1982

5120-14-334-8071
Open End Wrench

143348071
44.26X28: RNCC: 3 | RNVC: 2
0102460: RNCC: 5 | RNVC: 2
3148511024614: RNCC: 5 | RNVC: 2
44-26X28: RNCC: 5 | RNVC: 2
SYQ0764: RNCC: 5 | RNVC: 2
250-4942: RNCC: 5 | RNVC: 2
FACOM44.26X28: RNCC: 5 | RNVC: 9

2 Jun 1976

5120-14-352-3183
Spanner Wrench

143523183
MHJ288-47: RNCC: 3 | RNVC: 2
MHD288-24: RNCC: 5 | RNVC: 2
MHJ288-47: RNCC: 5 | RNVC: 2

16 Oct 1978

5120-14-402-7159
Embout Specifique

144027159
16965960: RNCC: 1 | RNVC: 2
65-3-02-045A60-565379T: RNCC: 3 | RNVC: 2
0416229T00: RNCC: 5 | RNVC: 2
16965960: RNCC: 5 | RNVC: 9

19 Jul 1985

5120-14-479-5246
Spring Inserter And Remover

144795246
2-55851-00: RNCC: 3 | RNVC: 2

17 Jan 1996

5120-14-373-2289
Screwdriver Bit

143732289
NO PRIMARY REF14-373-2289: RNCC: 3 | RNVC: 2
0025038: RNCC: 5 | RNVC: 2
ET.108: RNCC: 5 | RNVC: 2
ETS 8: RNCC: 5 | RNVC: 2
ETS8: RNCC: 5 | RNVC: 2

21 Oct 1981

5120-14-368-0744
Flat Tip Screwdriver

143680744
0003936: RNCC: 3 | RNVC: 2
ACH.6,5X100: RNCC: 5 | RNVC: 2
AGN6-5X100: RNCC: 5 | RNVC: 2
77974558: RNCC: 5 | RNVC: 2
H24177: RNCC: 5 | RNVC: 2
ACH.6,5X100: RNCC: 5 | RNVC: 9

19 Jan 1981

5120-14-424-8288
Spanner Wrench

144248288
3160S95-63-013-2: RNCC: 3 | RNVC: 2

9 Jun 1988

5120-14-218-1831
Spanner Wrench

142181831
17-9-152: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-261-6190
Cle De Coquille

142616190
NO PRIMARY REF14-261-6190: RNCC: 3 | RNVC: 2
1461: RNCC: 5 | RNVC: 9

1 Jan 1970

5120-14-408-9615
Extracteur Appui

144089615
853-201-504-0: RNCC: 3 | RNVC: 2

9 Apr 1986

5120-14-479-6306
Spanner Wrench

144796306
888-379-000-1: RNCC: 3 | RNVC: 2

24 Jan 1996

5120-14-240-4774
Adaptateur Cle Dyna

142404774
09-9: RNCC: 3 | RNVC: 2
M6-080: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-463-9779
Pliers

144639779
854-500-331-0: RNCC: 3 | RNVC: 2

7 Jul 1993

5120-14-398-2000
Endoscope Guide

143982000
853-500-166-0: RNCC: 3 | RNVC: 2

31 Jan 1985

5120-14-463-1256
Douille De Tarage

144631256
8814525000: RNCC: 3 | RNVC: 2
F300 0T 015 2746: RNCC: 5 | RNVC: 9

26 May 1993

5120-14-371-2213

5120-14-320-0120
Monte Ressort Outil

143200120
3CGF185: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-286-0158

5120-14-325-3430

5120-14-201-0600
Open End Wrench

142010600
33-17X21: RNCC: 3 | RNVC: 2

1 Jan 1962

5120-14-378-5605
Outil Pose Sangle

143785605
360A93-3403-00: RNCC: 3 | RNVC: 2

11 Aug 1982

5120-14-334-1687
Serrage Axe Outil

143341687
TF10A71303: RNCC: 3 | RNVC: 2
85-688-4606: RNCC: 6 | RNVC: 9

23 Apr 1976

5120-14-520-0332
Drift

145200332
330A98-3279-20: RNCC: 3 | RNVC: 2

3 May 2000

5120-14-357-3406
Spanner Wrench

143573406
E74-323-16A20: RNCC: 2 | RNVC: 2

7 Jun 1979

5120-14-517-3782
Solid Center Punch

145173782
0XB101-301-000-02: RNCC: 3 | RNVC: 2

8 Dec 1999

5120-14-420-5279
Spanner Wrench

144205279
853-100-010-0: RNCC: 3 | RNVC: 2

10 Dec 1987

5120-14-226-3142
Extracteur Roulemen

142263142
60290-02-20C0M1: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-299-6583
Socket Wrench Crowfoot Attachment

142996583
306709: RNCC: 3 | RNVC: 2
306709: RNCC: 5 | RNVC: 2
DIAMETRE-80A-SERIE100: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-031-9693
Socket Wrench Crowfoot Attachment

140319693
G1-16-101: RNCC: 3 | RNVC: 2
G1-16-101: RNCC: 5 | RNVC: 2

5 Jul 1980

5120-14-491-0217
Manche

144910217
4602 011 300 001: RNCC: 3 | RNVC: 2
F300 0T 001 1012: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-415-0253
Outill.Vis A Casser

144150253
65-3-05-045G00-626318C: RNCC: 3 | RNVC: 2
0413816T00: RNCC: 5 | RNVC: 2
413816T: RNCC: 5 | RNVC: 2
16965928: RNCC: 5 | RNVC: 2

26 Mar 1987

5120-14-388-2320
Open End Wrench

143882320
VTR501-2-11196: RNCC: 3 | RNVC: 2

12 Oct 1983

5120-14-349-2770
Electrical Card Extractor

143492770
NO PRIMARY REF14-349-2770: RNCC: 3 | RNVC: 2
12973-4: RNCC: 5 | RNVC: 9

22 May 1978

5120-14-420-7751
Tournevis

144207751
800537927: RNCC: 3 | RNVC: 2

16 Dec 1987

5120-14-369-4857
Emmanche Joint

143694857
OXB501-303-000-06: RNCC: 3 | RNVC: 2
0XB501-303-000-06: RNCC: 5 | RNVC: 2

17 Apr 1981

5120-14-406-5579
Joint Tori Emmanche

144065579
853-200-716-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-317-7948
Roulement Outillage

143177948
NO PRIMARY REF14-317-7948: RNCC: 3 | RNVC: 2
800487-79: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-405-9750
Spanner Wrench

144059750
0U50337: RNCC: 3 | RNVC: 2
85-692-6973: RNCC: 6 | RNVC: 9

12 Dec 1985

5120-14-214-2824
Cle A Encoches Spec

142142824
9970-115-236: RNCC: 3 | RNVC: 2
9970-115-236-00: RNCC: 5 | RNVC: 2

1 Jan 1965

5120-14-321-8400
Socket Head Screw Key

143218400
8810373004: RNCC: 3 | RNVC: 2
85-595-0120: RNCC: 6 | RNVC: 9

1 Jan 1975

5120-14-443-6340
Socle

144436340
NO PRIMARY REF14-443-6340: RNCC: 3 | RNVC: 2
OU137632: RNCC: 5 | RNVC: 9

30 Nov 1990

5120-14-389-6689
Plaque De Repoussag

143896689
41099328: RNCC: 3 | RNVC: 2

20 Dec 1983

5120-14-214-3986
Cle Reglage Des Bob

142143986
B2061316: RNCC: 3 | RNVC: 2
GC1342: RNCC: 5 | RNVC: 2

1 Jan 1965

5120-14-569-9077
Cross Tip Screwdriver

145699077
AND3X150: RNCC: 3 | RNVC: 2
773741: RNCC: 5 | RNVC: 2
FACOM AND3X150: RNCC: 5 | RNVC: 2

27 Oct 2011

5120-14-566-1103
Hand Hydraulic Jack

145661103
DPAX 006 PE 360955426: RNCC: 3 | RNVC: 2

20 Oct 2010

5120-14-564-9564
Edge Grip Sheet Metal Holder

145649564
AF 52: RNCC: 3 | RNVC: 2
191591455: RNCC: 5 | RNVC: 2

22 Jun 2010

5120-14-307-1287
Electrical Card Extractor

143071287
15890-103002: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-379-4865
Regle De Controle

143794865
605-01-14: RNCC: 3 | RNVC: 2
85-692-2569: RNCC: 6 | RNVC: 9

1 Oct 1982

5120-14-505-5473
Flat Tip Screwdriver

145055473
ENFD6514-A0-4X2-5X75X150: RNCC: 3 | RNVC: 2

24 Mar 1998

5120-14-337-3455
Spanner Wrench

143373455
60290-02-00-12M1: RNCC: 3 | RNVC: 2
60290-02-00-120M1: RNCC: 5 | RNVC: 2
85-688-1141: RNCC: 6 | RNVC: 9

7 Oct 1976

5120-14-366-8478
De Centrage Obus

143668478
30MS089-0000006: RNCC: 3 | RNVC: 2

20 Nov 1980

5120-14-428-5989
Extracteur Corps

144285989
46AM099-00-0001: RNCC: 3 | RNVC: 2

8 Dec 1988

5120-14-249-0010
Masse En Fer

142490010
NT46-10A0UT56MASSEACIER2A3KG: RNCC: 2 | RNVC: 2
NO PRIMARY REF14-249-0010: RNCC: 3 | RNVC: 2
NT46-10A0UT56MASSEACIER2A3KG: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-495-5457
Cle

144955457
NO PRIMARY REF14-495-5457: RNCC: 3 | RNVC: 2
420 446 020: RNCC: 5 | RNVC: 9
F300 0T 019 4463: RNCC: 6 | RNVC: 9

15 Oct 1997

5120-14-530-5473
Mechanical Puller Attachment

145305473
U.15-03: RNCC: 3 | RNVC: 2
3148510663739: RNCC: 5 | RNVC: 2

20 Jun 2002

5120-14-523-1303
Open End Wrench

145231303
B03-4229: RNCC: 3 | RNVC: 2

8 Jan 2001

5120-14-317-0559
Helical Compression Spring Retainer

143170559
160-888430-02: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-312-3275
Outil Reglage Volet

143123275
EA1-1M6: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-391-4054
Spanner Wrench

143914054
M3-051-50: RNCC: 3 | RNVC: 2

1 Mar 1984

5120-14-247-9800
Adaptateur Plan Fix

142479800
160-71960-07: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-315-9089
Cle Speciale

143159089
2-14553: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-561-1354
Torque Wrench

145611354
DYQ-100-0: RNCC: 3 | RNVC: 2
899577: RNCC: 5 | RNVC: 2

18 Jun 2009

5120-14-325-0282
Outillage De Percag

143250282
0S21064: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-362-1734
Extracteur Cloche

143621734
C46738: RNCC: 3 | RNVC: 2

20 Feb 1980

5120-14-286-7863

5120-14-337-4115

5120-14-226-0544

5120-14-290-8622
Tige De Guidage

142908622
NO PRIMARY REF14-290-8622: RNCC: 3 | RNVC: 2
157457: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-334-8842
Socket Wrench Extension

143348842
838811: RNCC: 3 | RNVC: 2
838811: RNCC: 5 | RNVC: 9
85-688-9667: RNCC: 6 | RNVC: 9

2 Jun 1976

5120-14-385-3131
Mechanical Puller Attachment

143853131
360A93-3232-21: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-385-3488
Detent Handling Tool

143853488
6809P33-6000-00: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-435-0689
Socket Wrench Crowfoot Attachment

144350689
853-190-017-0: RNCC: 3 | RNVC: 2

18 Oct 1989

5120-14-561-2507
Combination Box And Open End Wrench

145612507
51A-14: RNCC: 3 | RNVC: 2

30 Jun 2009

5120-14-289-8510
Electrical Contact Remover

142898510
M15519-20B: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-389-2419
Socket Head Screw Key

143892419
M34022: RNCC: 3 | RNVC: 2
85-692-3949: RNCC: 6 | RNVC: 9

29 Nov 1983

5120-14-360-9537
Cle De Detrompage

143609537
21312205: RNCC: 3 | RNVC: 2
21312205-0: RNCC: 5 | RNVC: 2

19 Dec 1979

5120-14-406-5678
Montage Outil

144065678
853-200-761-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-296-8750
Agrafeuse Bois A Ma

142968750
R8991501: RNCC: 3 | RNVC: 2
R899-15: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-576-3876
Hand Hammer

145763876
200C.28: RNCC: 3 | RNVC: 2
3148517553668: RNCC: 5 | RNVC: 2
0755366: RNCC: 5 | RNVC: 2

17 Jun 2013

5120-14-315-9462
Cle De Chapeau De P

143159462
24545961100: RNCC: 3 | RNVC: 2
145J611: RNCC: 5 | RNVC: 9
245459611: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-368-2860
Helice-Test

143682860
NO PRIMARY REF14-368-2860: RNCC: 3 | RNVC: 2
345-64111-0: RNCC: 5 | RNVC: 9

20 Feb 1981

5120-14-480-8024
Open End Wrench

144808024
LM-F1 91 10-E: RNCC: 3 | RNVC: 2

2 Apr 1996

5120-14-200-1401
Cimblot Demmancheme

142001401
881-0-253-000: RNCC: 3 | RNVC: 2
8810253000: RNCC: 3 | RNVC: 2
800-03-020-00: RNCC: 5 | RNVC: 2
8000302000: RNCC: 5 | RNVC: 2

1 Jan 1962

5120-14-395-4203
Piece Intermediaire

143954203
NO PRIMARY REF14-395-4203: RNCC: 3 | RNVC: 2
02640049700: RNCC: 5 | RNVC: 9

11 Oct 1984

5120-14-317-0308
De Guidage Outil

143170308
G1-15-613: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-416-7479
Positionn Outillage

144167479
536920: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-564-4382
Torque Wrench

145644382
40-MC-5: RNCC: 3 | RNVC: 2

29 Apr 2010

5120-14-491-5774
Cle

144915774
NO PRIMARY REF14-491-5774: RNCC: 3 | RNVC: 2
14CFS: RNCC: 5 | RNVC: 9
F300 0T 003 4093: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-321-9560
Cle A Panier

143219560
GSM196-010F36: RNCC: 3 | RNVC: 2
GSM196-10F36: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-347-7047
Spanner Wrench

143477047
35AM015: RNCC: 3 | RNVC: 2
85-689-5025: RNCC: 6 | RNVC: 9

1 Mar 1978

5120-14-376-0874

5120-14-238-6763

5120-14-490-8955
Fer

144908955
4067 520 000 383: RNCC: 3 | RNVC: 2
F300 0T 000 5236: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-362-1829
Outillage De Sertis

143621829
MFE234-45: RNCC: 3 | RNVC: 2
UFE234-45: RNCC: 5 | RNVC: 2

20 Feb 1980

5120-14-428-0930
Open End Wrench

144280930
NO PRIMARY REF14-428-0930: RNCC: 3 | RNVC: 2
44.13X16: RNCC: 5 | RNVC: 2
1028464R00: RNCC: 5 | RNVC: 2
10.13X16: RNCC: 5 | RNVC: 2
0102397: RNCC: 5 | RNVC: 2
44-13X16: RNCC: 5 | RNVC: 2

30 Nov 1988

5120-14-570-1409
Hand Hydraulic Jack

145701409
NO PRIMARY REF 14-570-1409: RNCC: 3 | RNVC: 2
102M2: RNCC: 5 | RNVC: 2

22 Nov 2011

5120-14-527-8159
Socket Wrench Screwdriver Attachment

145278159
888-497-300-1: RNCC: 3 | RNVC: 2

21 Nov 2001

5120-14-406-5677
Montage Outil

144065677
853-200-760-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-404-1218
Supp Dis Extracteur

144041218
853-201-707-0: RNCC: 3 | RNVC: 2

11 Sep 1985

5120-14-327-1556
Cle Pour Bosse

143271556
BN311-545M7REP1: RNCC: 3 | RNVC: 2
GY18244C30-32: RNCC: 5 | RNVC: 2

2 Jul 1975

5120-14-303-6304
Open End Wrench

143036304
D-29: RNCC: 3 | RNVC: 2
D29: RNCC: 3 | RNVC: 2
3272670260719: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-372-1603
Pare-Bri Mont Outil

143721603
D.80-02: RNCC: 3 | RNVC: 2
3148510196084: RNCC: 5 | RNVC: 2
D80-02: RNCC: 5 | RNVC: 2
0019608: RNCC: 5 | RNVC: 9

1 Sep 1981

5120-14-556-3802
Face Spanner Wrench Socket

145563802
TDANGMCT1233500-001: RNCC: 3 | RNVC: 9

3 Mar 2008

5120-14-212-9085
Rondelle Omnibus Sp

142129085
9970-115-235: RNCC: 3 | RNVC: 2
9970-115-235-00: RNCC: 5 | RNVC: 2

1 Jan 1964

5120-14-264-7883
Blacksmith's Top Fuller

142647883
641-15: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-343-2765
Bloc Pre-Sertissage

143432765
RMPS3F8X0-8M: RNCC: 3 | RNVC: 2

16 Jun 1977

5120-14-289-3572
Precontrainte Resso

142893572
5000266021: RNCC: 3 | RNVC: 2
5000266021: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-364-4088
Percage Montage

143644088
UFC232-43: RNCC: 3 | RNVC: 2
MFC232-43: RNCC: 5 | RNVC: 2

7 Aug 1980

5120-14-401-7500
Raclette Platrier

144017500
NO PRIMARY REF14-401-7500: RNCC: 3 | RNVC: 2
772: RNCC: 5 | RNVC: 9

13 Jun 1985

5120-14-209-5457
Extracteur Daxe Spe

142095457
17-9-1100: RNCC: 3 | RNVC: 2

1 Jan 1964

5120-14-451-4521
Metallique Poincon

144514521
851-913-196-0: RNCC: 3 | RNVC: 2

21 Nov 1991

5120-14-404-1086
Open End Wrench

144041086
10-15X16-P: RNCC: 3 | RNVC: 2
10-15X16P: RNCC: 3 | RNVC: 2
3272670239982: RNCC: 5 | RNVC: 2
10-15X16CP: RNCC: 5 | RNVC: 9

11 Sep 1985

5120-14-568-8336
Seal Inserter

145688336
888-567-200-1: RNCC: 3 | RNVC: 2

8 Jul 2011

5120-14-217-3646
Clef A Ergots Speci

142173646
NO PRIMARY REF14-217-3646: RNCC: 3 | RNVC: 2
225244: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-406-5537
Socket Wrench Extension

144065537
853-100-182-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-571-7317
Screwdriver Bit

145717317
NEV-T-20: RNCC: 3 | RNVC: 2

26 Apr 2012

5120-14-371-7923
Combination Box And Open End Wrench

143717923
50-5: RNCC: 3 | RNVC: 2
500-5: RNCC: 3 | RNVC: 9
3272670213418: RNCC: 5 | RNVC: 2
7471-5: RNCC: 5 | RNVC: 2
DEM500-5: RNCC: 5 | RNVC: 9
85-691-5582: RNCC: 6 | RNVC: 9

5 Aug 1981

5120-14-242-7602
Open End Wrench

142427602
E74301C9AGW: RNCC: 2 | RNVC: 2
VTR250-1110: RNCC: 3 | RNVC: 2
VTR250-1110: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-241-0236
Tas A Debosseler Sp

142410236
NO PRIMARY REF14-241-0236: RNCC: 3 | RNVC: 2
521: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-411-1029
Hole Sheet Metal Holder

144111029
ML2-5: RNCC: 3 | RNVC: 2
ML2,5: RNCC: 3 | RNVC: 2
ML2-5N0IR: RNCC: 5 | RNVC: 2
ML2-5: RNCC: 5 | RNVC: 2

6 Aug 1986

5120-14-234-3653
Broche Dentrainemen

142343653
0000258869: RNCC: 3 | RNVC: 2
0000258869: RNCC: 5 | RNVC: 9
258869: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-226-7569
Combination Box And Open End Wrench

142267569
40.15/16: RNCC: 3 | RNVC: 2
50.15/16: RNCC: 3 | RNVC: 2
50-15/16: RNCC: 3 | RNVC: 9
3148511009208: RNCC: 5 | RNVC: 2
40 15-16: RNCC: 5 | RNVC: 2
40-15-16: RNCC: 5 | RNVC: 2
3272670232525: RNCC: 5 | RNVC: 2
50 15-16: RNCC: 5 | RNVC: 2
0713 303 12: RNCC: 5 | RNVC: 2
40.15/16: RNCC: 5 | RNVC: 2

1 Jan 1966

5120-14-443-8461
Hole Sheet Metal Holder

144438461
50020520: RNCC: 3 | RNVC: 2
85-694-4316: RNCC: 6 | RNVC: 9

10 Dec 1990

5120-14-324-1603
Cle De Verrouillage

143241603
MAT196-0066F2: RNCC: 3 | RNVC: 2
MAT196-1234F15: RNCC: 3 | RNVC: 2
GSM196-11F5: RNCC: 5 | RNVC: 2
GSM196-011F5: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-405-3377
Mechanical Puller Attachment

144053377
7511 112 03391: RNCC: 3 | RNVC: 2
7511-112-03391: RNCC: 5 | RNVC: 2

27 Nov 1985

5120-14-470-0081
Bearing And Bushing Remover

144700081
MG988-013: RNCC: 3 | RNVC: 2

25 May 1994

5120-14-274-8688
Extenseur Ensemble

142748688
R31674-6-18R43: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-422-1702
Bearing And Bushing Inserter

144221702
M598-200000-1A1-2-2: RNCC: 3 | RNVC: 2

24 Feb 1988

5120-14-392-5795
Spanner Wrench

143925795
MN7062RUF1/1-7062RPF1/2ET2/2: RNCC: 3 | RNVC: 9
MN7062RUF1-1-7062RPF1-1ET2-2: RNCC: 5 | RNVC: 9

21 Mar 1984

5120-14-551-3313
Socket Wrench Screwdriver Attachment

145513313
D.106-10: RNCC: 3 | RNVC: 2

12 Sep 2006

5120-14-231-7233
Cle A Ergots Specia

142317233
9970-115-303: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-433-3202
Lot Pose-Joint

144333202
853-202-801-0: RNCC: 3 | RNVC: 2

19 Jul 1989

5120-14-466-5924
Bearing And Bushing Remover

144665924
851-500-016-0: RNCC: 3 | RNVC: 2

17 Nov 1993

5120-14-231-7230
Cle A Oeil Speciale

142317230
9970-115-292: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-327-2400
Socket Head Screw Key

143272400
MS2: RNCC: 3 | RNVC: 2
85-686-9257: RNCC: 6 | RNVC: 9

2 Jul 1975

5120-14-288-6775
Socket Wrench Handle Bar

142886775
NO PRIMARY REF14-288-6775: RNCC: 3 | RNVC: 2
69: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-326-2751
Screwdriver Bit

143262751
330A95-5505-22: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-324-7974
Cle Pour Robinet

143247974
466-8A2-09: RNCC: 3 | RNVC: 2
466-8A2-09: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-217-2675
Cle Embase Carburan

142172675
M12-041: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-292-5893

5120-14-214-3138

5120-14-472-2829
Outil Montage Couss

144722829
36545900800: RNCC: 3 | RNVC: 2

14 Oct 1994

5120-14-410-3856
Blocage Du Coupleur

144103856
NO PRIMARY REF14-410-3856: RNCC: 3 | RNVC: 2
600010: RNCC: 5 | RNVC: 9

18 Jun 1986

5120-14-393-0288
Combination Box And Open End Wrench

143930288
41.29: RNCC: 3 | RNVC: 2
3148511013762: RNCC: 5 | RNVC: 2
41-29: RNCC: 5 | RNVC: 2
1060245K00: RNCC: 5 | RNVC: 2
91564532: RNCC: 5 | RNVC: 2
0101376: RNCC: 5 | RNVC: 9

12 Apr 1984

5120-14-387-1925
Extrac Emmanc Outil

143871925
MGA233-41: RNCC: 3 | RNVC: 2
MGA233-41: RNCC: 5 | RNVC: 2

24 Aug 1983

5120-14-468-3635
Screwdriver Bit

144683635
NO PRIMARY REF14-468-3635: RNCC: 3 | RNVC: 2
0024844: RNCC: 5 | RNVC: 2
ES.654,5: RNCC: 5 | RNVC: 2
0242594C00: RNCC: 5 | RNVC: 2

23 Feb 1994

5120-14-454-9005
Socket Head Screw Key

144549005
NO PRIMARY REF14-454-9005: RNCC: 3 | RNVC: 2
91729304: RNCC: 5 | RNVC: 2
0123826: RNCC: 5 | RNVC: 2
83.S8: RNCC: 5 | RNVC: 2

24 Apr 1992

5120-14-438-7772
Socket Wrench Socket

144387772
330A93-3313-20: RNCC: 3 | RNVC: 2

4 Apr 1990

5120-14-345-9754
Screwdriver Bit

143459754
0025054: RNCC: 3 | RNVC: 2
ET.203/8: RNCC: 5 | RNVC: 2
85-689-2197: RNCC: 6 | RNVC: 9

5 Nov 1977

5120-14-459-7416
Flat Tip Screwdriver

144597416
AY.2,5X50: RNCC: 3 | RNVC: 2
3148510129709: RNCC: 5 | RNVC: 2
AY.2,5X50: RNCC: 5 | RNVC: 2
AY2-5X50: RNCC: 5 | RNVC: 2
0012970: RNCC: 5 | RNVC: 9

16 Dec 1992

5120-14-042-4316
Pince Extract Bloc

140424316
035775317: RNCC: 3 | RNVC: 9
171014: RNCC: 5 | RNVC: 2
171035: RNCC: 5 | RNVC: 2
35775317: RNCC: 5 | RNVC: 2

12 Dec 1977

5120-14-477-3896
Ventouse Dynamique

144773896
EV01: RNCC: 3 | RNVC: 2

23 Aug 1995

5120-14-520-4897
Embout A Creneaux

145204897
2P85614-00: RNCC: 3 | RNVC: 2

17 May 2000

5120-14-271-8363

5120-14-283-2490

5120-14-327-8703
Hole Sheet Metal Holder

143278703
CB6-2-5: RNCC: 3 | RNVC: 2
CB6-2-5: RNCC: 3 | RNVC: 2
851-910-097-0: RNCC: 5 | RNVC: 2
MO-5551/1: RNCC: 5 | RNVC: 2
F3300625: RNCC: 5 | RNVC: 2
CB6-2-5: RNCC: 5 | RNVC: 9
MM6-2-5: RNCC: 5 | RNVC: 9
85-676-6490: RNCC: 6 | RNVC: 9

2 Jul 1975

5120-14-362-7531
Spanner Wrench

143627531
G1-15-546: RNCC: 3 | RNVC: 2
G1-15546: RNCC: 5 | RNVC: 2
G1-15-546: RNCC: 5 | RNVC: 2
G1-15546: RNCC: 5 | RNVC: 2

19 Mar 1980

5120-14-222-6198
Socket Wrench Socket

142226198
0028410: RNCC: 3 | RNVC: 2
J.13/16L: RNCC: 5 | RNVC: 2
J13-16L: RNCC: 5 | RNVC: 2
J13.16L: RNCC: 5 | RNVC: 2
JL13-16: RNCC: 5 | RNVC: 2

1 Jan 1966

5120-14-454-9412
Socket Head Screw Key

144549412
84E.1/16X35: RNCC: 3 | RNVC: 2
3148511254097: RNCC: 5 | RNVC: 2
0125409: RNCC: 5 | RNVC: 9

29 Apr 1992

5120-14-473-2501
Screwdriver Bit

144732501
NO PRIMARY REF14-473-2501: RNCC: 3 | RNVC: 2
1059143K00: RNCC: 5 | RNVC: 2
3148510258300: RNCC: 5 | RNVC: 2
EX.140: RNCC: 5 | RNVC: 2
EXT.140: RNCC: 5 | RNVC: 2
0025940: RNCC: 5 | RNVC: 9

9 Dec 1994

5120-14-438-3039
Socket Wrench Socket

144383039
98346-UZ40MNA: RNCC: 3 | RNVC: 2
B576912: RNCC: 5 | RNVC: 2
GY-19-10: RNCC: 5 | RNVC: 2

12 Mar 1990

5120-14-320-7221
Face Spanner Wrench Socket

143207221
S16-0640-0604: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-368-5252
Open End Wrench

143685252
94AM022: RNCC: 3 | RNVC: 2
85-691-5152: RNCC: 6 | RNVC: 9

20 Feb 1981

5120-14-309-7428
Mechanical Puller Attachment

143097428
341A93-3503-21: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-421-0771
Spanner Wrench

144210771
6512-58428: RNCC: 3 | RNVC: 2

6 Jan 1988

5120-14-568-8330
Seal Inserter

145688330
888-566-500-1: RNCC: 3 | RNVC: 2

8 Jul 2011

5120-14-285-5954

5120-14-417-4621
Maintien Dispositif

144174621
1824645: RNCC: 3 | RNVC: 9

8 Jul 1987

5120-14-368-1561

5120-14-505-9247
Flat Tip Screwdriver

145059247
ENFD6514-A1X5-5X100X205: RNCC: 3 | RNVC: 2

30 Mar 1998

5120-14-402-4115
Torque Wrench Adapter

144024115
MHB372-23: RNCC: 3 | RNVC: 2

3 Jul 1985

5120-14-401-5652
Bearing And Bushing Remover

144015652
350A93-3705-20: RNCC: 3 | RNVC: 2

13 Jun 1985

5120-14-500-9808
Socket Wrench Socket

145009808
K.32HA: RNCC: 3 | RNVC: 2
3148510300184: RNCC: 5 | RNVC: 2
K-32HA: RNCC: 5 | RNVC: 2
K32HA: RNCC: 5 | RNVC: 2
0715 141 32: RNCC: 5 | RNVC: 2
F300 0T 025 0021: RNCC: 6 | RNVC: 9

29 Oct 1997

5120-14-272-3750
Open End Wrench

142723750
E74302R35-38BAW: RNCC: 2 | RNVC: 1

1 Jan 1971

5120-14-569-0340
Mechanical Puller

145690340
F27380000-1: RNCC: 3 | RNVC: 2
F27380000: RNCC: 3 | RNVC: 9
F27380000: RNCC: 5 | RNVC: 9

1 Aug 2011

5120-14-476-6985
Flat Tip Screwdriver

144766985
632160: RNCC: 3 | RNVC: 2
EGA2-200X3MM5: RNCC: 5 | RNVC: 2
2-200X3MM5: RNCC: 5 | RNVC: 2

28 Jun 1995

5120-14-432-8579
Spanner Wrench

144328579
853-912-002-0: RNCC: 3 | RNVC: 2

28 Jun 1989

5120-14-445-7064
Torque Wrench Adapter

144457064
10.9/16: RNCC: 3 | RNVC: 2
10.9/16: RNCC: 5 | RNVC: 2
3148510926155: RNCC: 5 | RNVC: 2
1082386R00: RNCC: 5 | RNVC: 2
0092615: RNCC: 5 | RNVC: 9

22 Feb 1991

5120-14-298-4539
Socket Head Screw Key

142984539
84.7/64: RNCC: 3 | RNVC: 2
3148511252406: RNCC: 5 | RNVC: 2
84 7-64: RNCC: 5 | RNVC: 2
84-7-64: RNCC: 5 | RNVC: 2
0125240: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-514-1227
Six Point Tip Screwdriver

145141227
ENFD6566-1-6X8X150: RNCC: 3 | RNVC: 2

27 Apr 1999

5120-14-493-8366
Pochette

144938366
NO PRIMARY REF14-493-8366: RNCC: 3 | RNVC: 2
129-609-608: RNCC: 5 | RNVC: 9
F300 0T 014 2108: RNCC: 6 | RNVC: 9

15 Oct 1997

5120-14-498-0770
Cle

144980770
61-12: RNCC: 3 | RNVC: 9
61-12: RNCC: 5 | RNVC: 9
F300 0T 002 5151: RNCC: 6 | RNVC: 9

29 Oct 1997

5120-14-480-9006
Combination Box And Open End Wrench

144809006
GS130-26: RNCC: 3 | RNVC: 2

11 Apr 1996

5120-14-314-9109
Spanner Wrench

143149109
M2-049: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-350-7731
Guide Demmanchement

143507731
OXB501-486-864-1: RNCC: 3 | RNVC: 2
0XB501-486-864-1: RNCC: 5 | RNVC: 2
85-635-2770: RNCC: 6 | RNVC: 9

12 Jul 1978

5120-14-476-6370
Socket Wrench Handle

144766370
S.151VSE: RNCC: 3 | RNVC: 2
3148510567860: RNCC: 5 | RNVC: 2
S151VSE: RNCC: 5 | RNVC: 2
0056786: RNCC: 5 | RNVC: 9
85-695-4234: RNCC: 6 | RNVC: 9

21 Jun 1995

5120-14-364-2691
Face Spanner Wrench Socket

143642691
239500-78: RNCC: 3 | RNVC: 2
TF10A32302: RNCC: 5 | RNVC: 2
85-688-4597: RNCC: 6 | RNVC: 9

7 Aug 1980

5120-14-276-3180
Socket Wrench Socket

142763180
SL3-4: RNCC: 3 | RNVC: 2
65LT3-4: RNCC: 3 | RNVC: 2
S3-4L: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-398-1986
Tete De Soupap Mors

143981986
2-9-01-304-003-401: RNCC: 3 | RNVC: 2

31 Jan 1985

5120-14-211-3763
Cle Decrou De Tige

142113763
D2604-40-6: RNCC: 3 | RNVC: 2

1 Jan 1964

5120-14-521-6328
Hole Sheet Metal Holder

145216328
52-060-0-26: RNCC: 3 | RNVC: 2
52-060-0-26: RNCC: 5 | RNVC: 9

30 Aug 2000

5120-14-232-4411
Combination Box And Open End Wrench

142324411
30-6: RNCC: 3 | RNVC: 2
30.6: RNCC: 3 | RNVC: 2
3272670256941: RNCC: 5 | RNVC: 2
30-6X6: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-572-3818
Mechanical Puller Adapter

145723818
9B-42989-1: RNCC: 3 | RNVC: 2
14100094089: RNCC: 5 | RNVC: 2

29 Jun 2012

5120-14-423-2322
Basculeur Cle Dyn

144232322
SP2085D-3-490: RNCC: 3 | RNVC: 2

14 Apr 1988

5120-14-272-3295
Open End Wrench

142723295
E74302C3-2-5-5WWF: RNCC: 2 | RNVC: 1

1 Jan 1971

5120-14-456-2904
Socket Wrench Socket Set

144562904
S.300-11: RNCC: 3 | RNVC: 2
3148515148699: RNCC: 5 | RNVC: 2
91729316: RNCC: 5 | RNVC: 2
0514869: RNCC: 5 | RNVC: 9

25 Jun 1992

5120-14-428-5833
Equipe Collier

144285833
46AM101-01-1: RNCC: 3 | RNVC: 2

8 Dec 1988

5120-14-252-9638
Pliers

142529638
183-20CPY: RNCC: 3 | RNVC: 2
3148511420003: RNCC: 5 | RNVC: 2
162-8362: RNCC: 5 | RNVC: 2
91352546: RNCC: 5 | RNVC: 9
FACOM183-20CPY: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-397-3839
Cle Montage Relais

143973839
A153-3-3: RNCC: 3 | RNVC: 2
0134827D00: RNCC: 5 | RNVC: 2
85-692-2482: RNCC: 6 | RNVC: 9

14 Dec 1984

5120-14-423-2269
Basculeur Cle Dyn

144232269
SP1735D-3-1040: RNCC: 3 | RNVC: 2

13 Apr 1988

5120-14-416-2064
Rabat Frein

144162064
8810003007: RNCC: 3 | RNVC: 2

3 Jun 1987

5120-14-556-9793
Woven Cable Grip

145569793
78000221: RNCC: 3 | RNVC: 2

25 Apr 2008

5120-14-229-3313

5120-14-416-7546
Reglage Bague

144167546
537389: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-319-4917

5120-14-281-7591
Cle Speciale

142817591
A125823A: RNCC: 3 | RNVC: 2
100144: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-474-4034
Dispositif Fixation

144744034
0986611876: RNCC: 3 | RNVC: 2
RAB3627: RNCC: 5 | RNVC: 2

15 Feb 1995

5120-14-332-6582
Extracteur Bouchon

143326582
32436: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-249-3846
Cle Speciale

142493846
3210-95-32-100: RNCC: 3 | RNVC: 2
08-314A: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-360-8272
Open End Wrench

143608272
44.12X14: RNCC: 3 | RNVC: 2
44.12X14: RNCC: 5 | RNVC: 2
3059000010: RNCC: 5 | RNVC: 2
369646: RNCC: 5 | RNVC: 2
0102392: RNCC: 5 | RNVC: 2
0102393: RNCC: 5 | RNVC: 2
44-12X14: RNCC: 5 | RNVC: 2
91352532: RNCC: 5 | RNVC: 2
250-4756: RNCC: 5 | RNVC: 2
FACOM44.12X14: RNCC: 5 | RNVC: 9

19 Dec 1979

5120-14-441-2376
Hand Terminal Crimping Tool

144412376
703A93-0901-21: RNCC: 3 | RNVC: 2

22 Aug 1990

5120-14-438-5056
Mise En Place Outil

144385056
J47951: RNCC: 3 | RNVC: 2
85-694-0773: RNCC: 6 | RNVC: 9

21 Mar 1990

5120-14-558-4094
Ring Beanding Tool

145584094
T300-184-2: RNCC: 3 | RNVC: 9
T300-184-2: RNCC: 5 | RNVC: 9

1 Oct 2008

5120-14-505-2472
Tournevisprvisindem

145052472
37-4: RNCC: 3 | RNVC: 2
CRPM A10: RNCC: 3 | RNVC: 2
FI 6502-02 STCM 00/96: RNCC: 4 | RNVC: 1
SYB2610: RNCC: 5 | RNVC: 2

16 Mar 1998

5120-14-372-9538
Flat Tip Screwdriver

143729538
AFR.2,5X75: RNCC: 3 | RNVC: 2
3148510055008: RNCC: 5 | RNVC: 2
AFR2-5X75: RNCC: 5 | RNVC: 2
162-5874: RNCC: 5 | RNVC: 2
0005500: RNCC: 5 | RNVC: 9
FACOMAFR.2,5X75: RNCC: 5 | RNVC: 9
85-691-6789: RNCC: 6 | RNVC: 9

21 Sep 1981

5120-14-395-7156
Extracteur Support

143957156
025-1775-78/1: RNCC: 3 | RNVC: 2
025-1775-78-1: RNCC: 5 | RNVC: 2

30 Oct 1984

5120-14-566-0662
Socket Wrench

145660662
332A93-3214-21: RNCC: 3 | RNVC: 2
332A93321421: RNCC: 5 | RNVC: 2

15 Oct 2010

5120-14-319-4537
Mechanical Puller Attachment

143194537
3130S95-68-058: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-363-9839
Bearing And Bushing Inserter

143639839
330A98-2056-00: RNCC: 3 | RNVC: 2

7 Aug 1980

5120-14-443-1553
Hand Blind Riveter

144431553
60-101-010: RNCC: 3 | RNVC: 2
RB40: RNCC: 5 | RNVC: 2
85-693-9374: RNCC: 6 | RNVC: 9

7 Nov 1990

5120-14-388-0653
Emmanchee Cle

143880653
95-02N25829: RNCC: 3 | RNVC: 2

12 Oct 1983

5120-14-370-3987
Hand Sheet Metal Groover

143703987
840001: RNCC: 3 | RNVC: 2

18 May 1981

5120-14-490-6899
Extensi

144906899
240 E 00078 700: RNCC: 3 | RNVC: 2
F300 0T 000 1009: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-559-6559
Seal Inserter

145596559
8816924000: RNCC: 3 | RNVC: 2

4 Feb 2009

5120-14-386-4856
Vise Jaw Caps

143864856
PR46597: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-310-7318
Matrice Poinconnage

143107318
MAS4686: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-311-3691

5120-14-236-2809
Socket Wrench Attachment Universal Joint

142362809
S240: RNCC: 3 | RNVC: 2
V2-95-012: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-364-2734
Spanner Wrench

143642734
NO PRIMARY REF14-364-2734: RNCC: 3 | RNVC: 2
0U118103: RNCC: 5 | RNVC: 9
118103: RNCC: 5 | RNVC: 9
85-691-0737: RNCC: 6 | RNVC: 9

7 Aug 1980

5120-14-470-0082
Bearing Staking Installation Tool

144700082
MG988-03: RNCC: 3 | RNVC: 2

25 May 1994

5120-14-352-3198
Reglage Hydra Outil

143523198
MJK247-21: RNCC: 3 | RNVC: 2
MJK247-01: RNCC: 5 | RNVC: 2
MJK247-21: RNCC: 5 | RNVC: 2

16 Oct 1978

5120-14-361-4904
Socket Wrench Spanner Attachment

143614904
8810574000: RNCC: 3 | RNVC: 2
85-691-1819: RNCC: 6 | RNVC: 9

24 Jan 1980

5120-14-214-9314
Extracteur Roue De

142149314
60290-01-22-020M2: RNCC: 3 | RNVC: 2
9970-143-084: RNCC: 5 | RNVC: 2

1 Jan 1965

5120-14-330-2418
Spanner Wrench

143302418
M16-028: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-220-8509
Open End Wrench

142208509
NO PRIMARY REF14-220-8509: RNCC: 3 | RNVC: 2
192042: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-392-7211
Spanner Wrench

143927211
043801-612000: RNCC: 3 | RNVC: 2
0438-01-612000: RNCC: 5 | RNVC: 2

7 Apr 1984

5120-14-332-7165
Hand Terminal Crimping Tool

143327165
NO PRIMARY REF14-332-7165: RNCC: 3 | RNVC: 2
11240: RNCC: 5 | RNVC: 9
11241: RNCC: 5 | RNVC: 9
BI6: RNCC: 5 | RNVC: 9
N11-240: RNCC: 5 | RNVC: 9
11241: RNCC: 5 | RNVC: 9

2 Jul 1975

5120-14-505-4354
Mechanical Finger

145054354
NO PRIMARY REF14-505-4354: RNCC: 3 | RNVC: 2
12201021: RNCC: 5 | RNVC: 2

18 Mar 1998

5120-14-043-1043
Spanner Wrench

140431043
0762019F00: RNCC: 3 | RNVC: 2
069U20-762019F: RNCC: 5 | RNVC: 2

10 Apr 1984

5120-14-313-4545
Open End Wrench

143134545
ECHC251-3-4REP7: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-314-8605

5120-14-386-6745
Rivetage Adaptation

143866745
853-200-274-0: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-471-0661
Open End Wrench

144710661
RT033515: RNCC: 3 | RNVC: 2
RT33515: RNCC: 5 | RNVC: 2
RT033515: RNCC: 5 | RNVC: 9
85-694-4033: RNCC: 6 | RNVC: 9

25 Jul 1994

5120-14-427-0749
Hand Terminal Crimping Tool

144270749
NO PRIMARY REF14-427-0749: RNCC: 3 | RNVC: 2
91778019: RNCC: 5 | RNVC: 2
0558 10 14: RNCC: 5 | RNVC: 2
FACOM 451A: RNCC: 5 | RNVC: 2
3148511767702: RNCC: 5 | RNVC: 2
451A: RNCC: 5 | RNVC: 2
0239233E00: RNCC: 5 | RNVC: 2
0176770: RNCC: 5 | RNVC: 9
958 218 000 001: RNCC: 6 | RNVC: 9

6 Oct 1988

5120-14-313-8778
Spanner Wrench

143138778
M2-032: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-431-4836
Socket Head Screw Key

144314836
0372-42-10504: RNCC: 3 | RNVC: 2

19 Apr 1989

5120-14-253-4537
Spanner Wrench

142534537
321-95-0000: RNCC: 3 | RNVC: 2
08-323: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-364-2743
Entraineur Pompe Hy

143642743
0U119421: RNCC: 3 | RNVC: 2
0U119421: RNCC: 5 | RNVC: 9
85-691-3071: RNCC: 6 | RNVC: 9

7 Aug 1980

5120-14-431-4834
Solid Center Punch

144314834
0372-42-10502: RNCC: 3 | RNVC: 2

19 Apr 1989

5120-14-315-1845
Poussoir Extracteur

143151845
0-51706-3: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-379-3636
A Fourch Tournevis

143793636
004328005P: RNCC: 3 | RNVC: 2

1 Oct 1982

5120-14-243-1598

5120-14-229-3310
Cle A Sangle

142293310
69-15: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-374-6773
Face Spanner Wrench Socket

143746773
D1512-2247: RNCC: 3 | RNVC: 2

30 Jan 1982

5120-14-453-6934
Torque Wrench Adapter

144536934
NO PRIMARY REF14-453-6934: RNCC: 3 | RNVC: 2
300C92720: RNCC: 5 | RNVC: 9

5 Mar 1992

5120-14-272-3706
Open End Wrench

142723706
E74302R7-9BAW: RNCC: 2 | RNVC: 1

1 Jan 1971

5120-14-205-5689
Spanner Wrench

142055689
RU253-5M112A2A: RNCC: 3 | RNVC: 2
253-5M112A2A: RNCC: 5 | RNVC: 2
RU253-5M112A2: RNCC: 5 | RNVC: 2

1 Jan 1964

5120-14-343-6361
Canon De Guidage

143436361
330A97-2406-58: RNCC: 3 | RNVC: 2

16 Jun 1977

5120-14-511-8638
Screwdriver Bit

145118638
ET.206: RNCC: 3 | RNVC: 2
ET-206: RNCC: 5 | RNVC: 2
ET206: RNCC: 5 | RNVC: 2

27 Jan 1999

5120-14-270-6457
Spanner Wrench

142706457
8810003070: RNCC: 3 | RNVC: 2
6-000-342: RNCC: 5 | RNVC: 2
881-0-003-070: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-348-8372
Faux Mors

143488372
D47689: RNCC: 3 | RNVC: 2

19 Apr 1978

5120-14-351-9446
Screwdriver Handle

143519446
99003-50000: RNCC: 3 | RNVC: 2
99003-50000: RNCC: 5 | RNVC: 2

16 Oct 1978

5120-14-513-1250
Screwdriver Bit

145131250
FD6515-C05X4: RNCC: 3 | RNVC: 2
FD6515C05X4: RNCC: 5 | RNVC: 2

5 Mar 1999

5120-14-357-9976
Equipe Embout

143579976
MKM0432900: RNCC: 3 | RNVC: 2
MKM0432900: RNCC: 5 | RNVC: 2

20 Jul 1979

5120-14-349-3853
Fuite P2 Tournevis

143493853
9970-115-653: RNCC: 3 | RNVC: 2

22 May 1978

5120-14-527-8225
Open End Wrench

145278225
888-510-700-1: RNCC: 3 | RNVC: 2

21 Nov 2001

5120-14-417-5138
Speciale Pince

144175138
853-100-247-0: RNCC: 3 | RNVC: 2

8 Jul 1987

5120-14-534-6980
Cross Tip Screwdriver

145346980
273 M 2: RNCC: 3 | RNVC: 2

2 Apr 2003

5120-14-368-6802
Combination Box And Open End Wrench

143686802
40.50L: RNCC: 3 | RNVC: 2
41.50L: RNCC: 5 | RNVC: 2
3148511011713: RNCC: 5 | RNVC: 2
40-50: RNCC: 5 | RNVC: 2
40-50L: RNCC: 5 | RNVC: 2
91633678: RNCC: 5 | RNVC: 2
91633678: RNCC: 5 | RNVC: 2
0101171: RNCC: 5 | RNVC: 9

20 Feb 1981

5120-14-368-4123
Socket Wrench Socket

143684123
Z0103912: RNCC: 3 | RNVC: 2
Z0103-912: RNCC: 5 | RNVC: 2

20 Feb 1981

5120-14-568-5710
Socket Wrench Handle

145685710
J.140A: RNCC: 3 | RNVC: 2
0661811: RNCC: 5 | RNVC: 2
3148516618115: RNCC: 5 | RNVC: 2

21 Jun 2011

5120-14-236-2442

5120-14-291-6156

5120-14-200-4435
Socket Wrench Socket

142004435
K29: RNCC: 3 | RNVC: 2
C-29: RNCC: 3 | RNVC: 2
C29: RNCC: 3 | RNVC: 2
3272670301214: RNCC: 5 | RNVC: 2

1 Jan 1962

5120-14-406-5699
Montage Outil

144065699
853-200-731-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-288-6983
Spanner Wrench

142886983
D1553-4832: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-490-6435
Socket Wrench Socket

144906435
OCE83-30G: RNCC: 3 | RNVC: 2
91778133: RNCC: 5 | RNVC: 2

8 Oct 1997

5120-14-578-4551
Hand Shovel

145784551
J-PELLE/BR: RNCC: 3 | RNVC: 2
A09901797: RNCC: 5 | RNVC: 2
Y00015350: RNCC: 5 | RNVC: 2

2 Dec 2013

5120-14-214-3140

5120-14-475-7320
Bearing Staking Installation Tool

144757320
6802F31-4940-00: RNCC: 3 | RNVC: 2

26 Apr 1995

5120-14-333-3959
Bloc Pressertissage

143333959
RPS5F18X1K: RNCC: 3 | RNVC: 2
RPS4F16-18K: RNCC: 5 | RNVC: 2
85-688-6818: RNCC: 6 | RNVC: 9

2 Jul 1975

5120-14-517-9949
Six Point Tip Screwdriver

145179949
ENFD6577-40X150: RNCC: 3 | RNVC: 2

21 Jan 2000

5120-14-466-1966
Cle De Demontage

144661966
AESUFR8104-150B: RNCC: 3 | RNVC: 2
85-695-1966: RNCC: 6 | RNVC: 9

27 Oct 1993

5120-14-492-5448
Cle

144925448
NO PRIMARY REF14-492-5448: RNCC: 3 | RNVC: 2
5000918877: RNCC: 5 | RNVC: 9
F300 0T 007 9263: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-514-0148
Open End Wrench

145140148
ENFD29159-24X30: RNCC: 3 | RNVC: 2

22 Apr 1999

5120-14-321-9553
Cle A Panier

143219553
GSM196-010F29: RNCC: 3 | RNVC: 2
GSM196-10F29: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-516-3435
Craftsman's Tweezers

145163435
29DSA-28: RNCC: 3 | RNVC: 2
1134003K00: RNCC: 5 | RNVC: 2

22 Sep 1999

5120-14-343-4932
Open End Wrench

143434932
10-16X18: RNCC: 3 | RNVC: 2
85-688-4452: RNCC: 6 | RNVC: 9

16 Jun 1977

5120-14-373-6779
Filtre A Huile Cle

143736779
225781: RNCC: 3 | RNVC: 2

13 Nov 1981

Load More Results