What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.

A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Blacksmith's Punch?

A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Mechanical Finger?

A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.

A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Screwdriver And Wrench Assembly?

A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Stakeholder Bench Plate?

A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.

What is a Drill Drift?

A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.

A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Digging Bar?

A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

What is a Valve Spring Lifter?

A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.

What is a Fuse Puller?

A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.

Hand Tools, Nonedged, Nonpowered - France (FR)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by France (FR) - NCB is 14

Page 104 of 110

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by France

51	20	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - France (FR)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 16 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Pipe Vise? 19 Items: A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.
What is a Hand Vise? 25 Items: A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.
What is a Hand Hydraulic Jack? 133 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 153 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 903 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 17 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
Swage,Bottom,Blacksmith's 10 Items
What is a Hand Tube Flaring Tool? 23 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Blacksmith's Punch? 12 Items: A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.
What is a Drain Plug Wrench? 45 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 57 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 16 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 3829 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
Flatter,Blacksmith's 18 Items
Swage,Top,Blacksmith's 12 Items
What is a Pipe Wrench? 110 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 149 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 53 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
Screwdriver,Offset 54 Items
What is a Screwdriver Bit? 707 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Mechanical Finger? 25 Items: A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.
What is a Socket Wrench Socket? 1803 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 1412 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 1641 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 52 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 565 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
Jack,Push-Pull,Screw 30 Items
What is a Hand Tube Bender? 54 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 1106 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 55 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pinch Bar? 19 Items: A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.
What is a Pry Bar? 17 Items: A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.
What is a Wrecking Bar? 15 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 273 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 413 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 32 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 295 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
Face,Hammer,Inserted 25 Items
What is a Hole Sheet Metal Holder? 37 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Screwdriver And Wrench Assembly? 11 Items: A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.
What is a Hand Rivet Set? 121 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Stakeholder Bench Plate? 22 Items: A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.
What is a Drill Drift? 32 Items: A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.
What is a Tack Claw? 15 Items: A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.
Mattock 28 Items
What is a Socket Wrench Handle Bar? 108 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Stake,Sheet Metalworking 50 Items
Riveter,Blind,Hand 76 Items
What is a Hand Shovel? 43 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 98 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 30 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
What is a Digging Bar? 20 Items: A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.
Block,Dolly,Sheet Metalworking 56 Items
What is a Piston Ring Compressor? 34 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Valve Spring Lifter? 29 Items: A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.
What is a Fuse Puller? 20 Items: A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.
What is a Hand Lead Seal Press? 18 Items: A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.
What is a Hand Beading Tool? 91 Items: A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.
What is a Hand Hammer? 502 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
Head,Hand Hammer 81 Items
What is a Lamp Extractor? 76 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Tube Packing Ring Installing Tool? 29 Items: A Tube Packing Ring Installing Tool (INSTALLING TOOL,TUBE PACKING RING) is an item designed to insert packing rings on tubes within tube sheets on condensers and similar heat exchangers. In operation, the packing rings are assembled on the loading pin mandrel and are then transferred from the mandrel on to the tube by means of a tubular sleeve which slides on the mandrel.
What is a Carpenters' Pincers? 18 Items: A Carpenters' Pincers (PINCERS,CARPENTERS') is a plierlike hand tool having two opposing jaws which may have hammerlike backs. One handle has a nail or tack pulling claw, the other is shaped to form a screwdriver. The tool may contain a wire cutter. See also NIPPERS, END CUTTING and PINCERS, FARRIERS'.
What is a Trowel? 33 Items: A Trowel is a tool used for bricklaying, concrete work, plastering, linoleum laying, and masonry work. Excludes CORNER TOOL, CONCRETE.
What is a Hand Abrasive Wheel Dresser? 12 Items: A Hand Abrasive Wheel Dresser (DRESSER,ABRASIVE WHEEL,HAND) is a tool designed to remove glaze from, dress, shape, sharpen, and true solid abrasive wheels. Excludes NIB, DIAMOND, WHEEL DRESSING.
What is a Lamp Cap Extractor? 32 Items: A Lamp Cap Extractor (EXTRACTOR,LAMP CAP) is a tool specifically designed to facilitate the removal of lamp caps from switchboards, panels or indicator lamps.
What is a Rivet Bucking Bar? 51 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 86 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 277 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Woven Cable Grip? 23 Items: A Woven Cable Grip (GRIP,CABLE,WOVEN) is a braided wire device designed to clutch a bare or insulated conductor, cable or wire rope, for holding taut or drawing through conduit.
What is a Screw Thread Insert Extractor? 19 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is an Electron Tube Extractor? 18 Items: An Electron Tube Extractor (EXTRACTOR,ELECTRON TUBE) is a hand tool designed to facilitate the removal of electron tubes from electronic equipment and to avoid burning the fingers. It may be used for installing tubes.
What is a Cross Tip Screwdriver? 362 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 21 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 11 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 37 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Tool Handle Wedge? 10 Items: A Tool Handle Wedge (WEDGE,TOOL HANDLE) is excludes WEDGE, WOOD.
What is a Marlinespike? 16 Items: A Marlinespike is a metal hand tool made in the shape of a tapered pin. One end is pointed and the opposite end may be headed. The body may contain an eye for a lanyard sling, or be grooved lengthwise. Excludes CABLE PICK and FID.
What is an Aligning Punch? 272 Items: An Aligning Punch (PUNCH,ALIGNING) is a round, square, hexagonal or octagonal bodied hand tool, having a round tapered section 6-1/2 inches (165.1 mm) or more in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, DRIFT and DRIFTPIN.
What is a Drift Punch? 25 Items: A Drift Punch (PUNCH,DRIFT) is a round, square, hexagonal, or octagonal bodied hand tool, having a round tapered section 4 to 6 inches (101.6 mm to 152.4 mm) inclusive in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, ALIGNING; and DRIFTPIN.
What is a Putty Knife? 36 Items: A Putty Knife (KNIFE,PUTTY) is a hand tool with a nonedged blade fixed to a handle for laying on and smoothing putty and the like.
What is a Socket Wrench Adapter-Extension? 40 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 30 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 184 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Socket Wrench Ratchet Attachment? 47 Items: A Socket Wrench Ratchet Attachment (RATCHET ATTACHMENT,SOCKET WRENCH) is a connection for socket wrenches and handles. Consists of a ratcheting mechanism with an internal drive on one end and an external drive on the opposite end of the same size. The item is designed to permit continuous rotation of the socket in one direction without removing the socket or handle and without a complete rotation of the handle.
What is a Wrench Extension Handle? 81 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Socket Wrench Crowfoot Attachment? 155 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 33 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 43 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 48 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 2394 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 372 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 300 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 661 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 32 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand-Operated Grommet And Eyelet Press? 12 Items: A Hand-Operated Grommet And Eyelet Press (PRESS,GROMMET AND EYELET,HAND-OPERATED) is a device which punches or pierces holes and in addition fastens or sets eyelets and grommets in cloth, paper and similar material. May be used for fastening or setting rivets, lacing hooks and snaps in cloth, paper and similar material. It is hand operated by lever or screw action. See also PUNCH, EYELET, PLIER TYPE and PRESS, GROMMET AND EYELET, FOOT OPERATED.
What is a Claw Bar? 19 Items: A Claw Bar (BAR,CLAW) is before using, refer to Reference Drawing Group AG.
What is a Shock Type Wheel Stud Nut Wrench? 11 Items: A Shock Type Wheel Stud Nut Wrench (WRENCH,WHEEL STUD NUT,SHOCK TYPE) is a manually operated item designed to remove wheel stud nuts. In operation the inner nut is turned by a socket attached to a shaft on which is a loose swinging weighted handle. The weighted handle may be swung quickly to provide an impact force against the socket to loosen the seized or jammed nuts. The outer nut is held stationary by a separate hexagonal holding wrench.
What is a Drift Pin Set? 30 Items: A Drift Pin Set is a group of DRIFTPIN having different characteristics.
What is a Tire Iron? 25 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 115 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Blacksmith's Vise? 14 Items: A Blacksmith's Vise (VISE,BLACKSMITH'S) is a clamping device consisting of a mounting plate, one stationary and one manual screw actuated jaw and a supporting member extending downward from the stationary jaw to the floor. Designed to be mounted on a bench, table or the like. May include pipe holding jaws.
What is a Machinist's Vise? 64 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Clamp Base Bench Vise? 10 Items: A Clamp Base Bench Vise (VISE,BENCH,CLAMP BASE) is a clamping device consisting of a base, one stationary and one manual screw actuated jaw, and one or more guide bars or rods. Designed with an integral clamp for attaching to a bench, table, or the like. Does not include pipe holding jaws.
What is a Fixed Open End Wrench Set? 86 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Nail Set? 11 Items: A Nail Set is a round knurled, square, hexagonal or octagonal bodied hand tool having a round tapered section terminating in a cupped point. It is designed to set brad head nails below the surface by striking it a hammerlike blow. See also PUNCH, DRIVE PIN.
What is a Socket Wrench Set? 202 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is an Open End Box Wrench Set? 10 Items: An Open End Box Wrench Set (WRENCH SET,OPEN END BOX) is a group of WRENCH, OPEN END BOX having different characteristics.
What is a Combination Box And Open End Wrench Set? 72 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Box Wrench Set? 36 Items: A Box Wrench Set (WRENCH SET,BOX) is a group of box wrenches having different characteristics. It may include a HANDLE, EXTENSION WRENCH. See also WRENCH SET, COMBINATION, BOX AND OPEN END.
What is a Hot Line Stick? 26 Items: A Hot Line Stick is a hand tool consisting of a straight, round stick (pole) made of a suitable nonconductive material with a tool fixed to one end. The other end may be plain or have a butt mounting device fixed to it. Various types of attachments (hooks, rings, and bands) may be fixed to the body. It is designed for use in the repair and maintenance of live high voltage aerial lines. Excludes hot line sticks without heads.
Handle,Mattock-Pick 15 Items
What is a Wrench Kit? 73 Items: A Wrench Kit is an assortment of various types and sizes of wrenches such as SOCKET, SOCKET WRENCH; WRENCH, OPEN END, FIXED; WRENCH, BOX and the like. It may include adapter(s), ratchet(s) and the like. See also WRENCH SET (as modified.
What is a Brad Awl? 15 Items: A Brad Awl (AWL,BRAD) is a small, pointed tool used by shoemakers, saddlers, cabinetmakers, and the like for piercing small holes in wood, leather, and similar materials, and consists of a handle with a ferrule and a blade. The blade is round, terminating in a beveled, sharp straight edge and has a shank which passes through the center of the handle.
What is a Scratch Awl? 20 Items: A Scratch Awl (AWL,SCRATCH) is an item whose nominal length of blade is less than 4 inches (101.6 millimeters) and is provided with a nondetachable handle.
What is a Screw Extractor Set? 10 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 102 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
Jack,Scissors,Hand 26 Items
What is a Piston Ring Expander? 23 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
Mallet,Plastic 62 Items
Mallet,Rubber 10 Items
What is a Wood Mallet? 37 Items: A Wood Mallet (MALLET,WOOD) is excludes MALLET, CALKING; MALLET, HAWSING and MALLET, SERVING.
What is a Rack Bar Jack? 30 Items: A Rack Bar Jack (JACK,RACK BAR) is excludes JACK, BUMPER and JACK, REEL, HAND.
What is a Pneumatic Tire Valve Core Inserter And Remover? 14 Items: A Pneumatic Tire Valve Core Inserter And Remover (INSERTER AND REMOVER,PNEUMATIC TIRE VALVE CORE) is a bar of steel having a small cylindrical slotted end for removing or installing a valve core in a valve stem by a screwing motion. See also REPAIR TOOL, PNEUMATIC TIRE VALVE.
What is a Hand Tube Swaging Tool Kit? 20 Items: A Hand Tube Swaging Tool Kit (SWAGING TOOL KIT,TUBE,HAND) is a hand-operated noncutting tool consisting of one or more PUNCH, TUBE SWAGING, HAND and a tube flaring bar.
What is a Hand Tube Flaring Punch? 11 Items: A Hand Tube Flaring Punch (PUNCH,TUBE FLARING,HAND) is a noncutting tool having a shaped end or section designed to flare the ends of tubes. One type is designed to flare the ends of tubes against a tube sheet, and another to flare tube ends to mate with tube fittings. Includes punch components of FLARING TOOL, TUBE, HAND.
What is a Hose Strap Band Clamping Tool? 26 Items: A Hose Strap Band Clamping Tool (CLAMPING TOOL,STRAP BAND,HOSE) is an item designed to tension and lock metal straps around a rubber hose, and the like. It is also used to clamp and hold fittings therein.
What is a Mechanical Puller? 3073 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 470 Items
What is a Slip Joint Pliers? 84 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Brake Repair Pliers? 14 Items: A Brake Repair Pliers (PLIERS,BRAKE REPAIR) is a tool having jaws designed for use in brake repair operations, such as removing and replacing items such as keys, springs, and the like. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 226 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 12 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 81 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 56 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 15 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 11 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 29 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Cross Tip Screwdriver Set? 14 Items: A Cross Tip Screwdriver Set (SCREWDRIVER SET,CROSS TIP) is a group of SCREWDRIVER, CROSS TIP having different characteristics.
What is a Spanner Wrench Set? 18 Items: A Spanner Wrench Set (WRENCH SET,SPANNER) is a group of items under WRENCH, SPANNER having different characteristics.
What is a Drive Pin Punch Set? 31 Items: A Drive Pin Punch Set (PUNCH SET,DRIVE PIN) is a group of PUNCH, DRIVE PIN having different characteristics.
What is an Aligning Punch Set? 13 Items: An Aligning Punch Set (PUNCH SET,ALIGNING) is a group of PUNCH, ALIGNING having different characteristics. See also DRIFTPIN SET.
What is a Slugging Type Box Wrench Socket? 16 Items: A Slugging Type Box Wrench Socket (SOCKET,SLUGGING TYPE BOX WRENCH) is an item having a hexagonal external drive at one end, made to fit into the internal hexagonal or 12-point opening of a slugging type box wrench. The opposite end has a single-broached hexagonal opening of the same size as the external drive. The item is designed with extra thick walls to withstand the impact of sledge blows on the driving wrench.
What is a Mechanical Puller Step Plate? 44 Items: A Mechanical Puller Step Plate (STEP PLATE,MECHANICAL PULLER) is a circular disk, flanged to provide a shoulder, and designed to provide a base for the screw point of a PULLER, MECHANICAL when pulling externally mounted bearings, gears, and the like from hollow shafts or housings. It has a concentric, countersunk hole to accommodate the puller screw point.
What is a Solid Center Punch? 79 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Cable Type Ratchet Lever Puller? 20 Items: A Cable Type Ratchet Lever Puller (PULLER,RATCHET LEVER,CABLE TYPE) is an item consisting of a metal frame and ratchet lever reel to which is attached one end of a flexible cable (wire rope). The cable feeds through the fast eye in the metal frame, and may be reeved through a slip hook tackle hook. See also BINDER, LOAD; HOIST, WIRE ROPE and STRETCHER, WIRE.
What is an Electronic Equipment Tuning Wand? 18 Items: An Electronic Equipment Tuning Wand (TUNING WAND,ELECTRONIC EQUIPMENT) is a hand-held rod used in determining the adjustment of the windings of a radio frequency coil. It is made of insulating material with iron on one end and brass on the other end. By inserting the iron end in the coil, the inductance is increased and by inserting the brass end, the inductance is decreased.
What is a Combination Open End And Spanner Wrench? 14 Items: A Combination Open End And Spanner Wrench (WRENCH,OPEN END AND SPANNER,COMBINATION) is a tool having open end wrench characteristics at one end and spanner wrench features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s) at the other end.
What is a Detent Handling Tool? 187 Items: A Detent Handling Tool (HANDLING TOOL,DETENT) is a specially designed handling tool consisting of a rigid bar with a T-handle on one end. The other end is equipped with threads designed to mate the threads of a detent to facilitate inserting or extracting.
What is a Hand Material Handling Hook? 23 Items: A Hand Material Handling Hook (HOOK,MATERIAL HANDLING,HAND) is a hook whose curved end conforms to Style AP1, AP2, AP3 or AP4 of Reference Drawing Group AP. Excludes HOOK, MANHOLE COVER, HAND; HOOK, WIRE BREAKING, HAND; HOOK, ROCK CRUSHER FEEDING, HAND; HOOK, STRAINER REMOVING, HAND and HOOKS, BAG HANDLING, HAND.
What is a Magnetic Retrieving Tool? 11 Items: A Magnetic Retrieving Tool (RETRIEVING TOOL,MAGNETIC) is a hand-operated magnetic device used to locate and pick up metallic articles, such as bolts, nuts, pins, washers, and the like, in confined spaces. It may be rigid, flexible or adjustable. Excludes FINGER, MECHANICAL.
What is a Mechanical Puller Adapter? 78 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Combination Box And Open End Box Wrench? 13 Items: A Combination Box And Open End Box Wrench (WRENCH,BOX AND OPEN END BOX,COMBINATION) is a double end wrench, box and open end box, primarily designed for removing or replacing tube fittings. The opening in the open end box may be machined at an angle from the longitudinal center line of the wrench.
What is a Screw Thread Insert Inserter? 136 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Flat Tip Screwdriver Set? 48 Items: A Flat Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP) is a group of SCREWDRIVER, FLAT TIP having different characteristics.
What is a Terminal Crimping Tool Contact Positioner? 89 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 16 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is an Adjustable Wrench? 138 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 239 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 75 Items
Handle,Shovel 10 Items
What is a Socket Wrench Spanner Attachment? 88 Items: A Socket Wrench Spanner Attachment (SPANNER ATTACHMENT,SOCKET WRENCH) is an item having an adjustable or fixed span with pin, hook, or key type end that is used to fit and turn various size retaining rings, cover plates, plugs, couplings, and like parts. Usually designed to be driven by a male driver.
What is a Retaining Ring Installation Tool? 44 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Tacker? 16 Items: A Tacker is a hand-operated, hammerlike or gunlike item without a clincher, used to drive preformed connecting elements like pins, nails or staples through one object or piece of material into another. Excludes STAPLER (as modified).
What is a Bearing And Bushing Inserter? 290 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 207 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 939 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 14 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 93 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 161 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 94 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 141 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 53 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Six Point Tip Screwdriver? 155 Items: A Six Point Tip Screwdriver (SCREWDRIVER,SIX POINT TIP) is a manual screwdriver having a single nonremoveable blade having a tip with six rounded points.
What is a Seal Inserter And Remover? 147 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 478 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is a Preformed Packing Inserter And Remover? 34 Items: A Preformed Packing Inserter And Remover (INSERTER AND REMOVER,PREFORMED PACKING) is a hand tool designed to install and remove a PACKING, PREFORMED.
What is a Pin Remover? 34 Items: A Pin Remover (REMOVER,PIN) is a hand tool designed to facilitate the removal of a pin from a hole.
What is a Pin Inserter And Remover? 13 Items: A Pin Inserter And Remover (INSERTER AND REMOVER,PIN) is a rodlike tool designed to facilitate the insertion and removal of a pin from a hole.
What is an Electrical Contact Inserter And Remover? 37 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Piston Inserter? 40 Items: A Piston Inserter (INSERTER,PISTON) is a tool designed to permit installation of a piston or piston assembly without damaging the packings or piston.
What is a Spring Inserter And Remover? 85 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 13 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Stud Inserter? 22 Items: A Stud Inserter (INSERTER,STUD) is a device designed to drive in studs. It does not have any facilities for removing or extracting studs. See also INSERTER AND REMOVER, STUD.
What is a Stud Inserter And Remover? 17 Items: A Stud Inserter And Remover (INSERTER AND REMOVER,STUD) is a group of items designed to extract and to drive studs. It may include collets, guides, housings, holders and the like. See also REMOVER SET, STUD and INSERTER, STUD.
What is a Gear Inserter? 54 Items: A Gear Inserter (INSERTER,GEAR) is a hand tool designed to install various gears onto a gearshaft. It may be operated by a pushing or a striking force.
What is a Crimping Tool Die? 73 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is an Electrical Connector Inserter? 45 Items: An Electrical Connector Inserter (INSERTER,ELECTRICAL CONNECTOR) is a hand tool designed to hold an electrical connector, and to assist in the positioning and installation of the connector on a cover, panel or the like.
What is a Float? 12 Items: A Float is a tool used for concrete, plastering and grouting work.
What is a Mechanical Puller Set? 19 Items: A Mechanical Puller Set (PULLER SET,MECHANICAL) is two or more separate PULLER, MECHANICAL of different fixed sizes.
What is a Lifting Pneumatic Bag? 11 Items: A Lifting Pneumatic Bag (PNEUMATIC BAG,LIFTING) is a device made of flexible material designed to lift another item by being placed under the item and being inflated with air or some other gas. It will have a means of being connected to an air or gas source and may include a connector hose, a control valve and/or a pressure regulator.
What is a Cable Tie Installation Tool? 22 Items: A Cable Tie Installation Tool (INSTALLATION TOOL,CABLE TIE) is a lightweight, hand-held, hand-operated tool designed to fasten cable ties, straps and the like. Cable tie is inserted into the nose of the tool flush to the cable tie head. Trigger handle tightens cable tie and cuts off any excess. These installation tools are available in a variety of sizes depending on their intended use with miniature, intermediate, standard, heavy or extra heavy cross section ties.
What is a Bearing Staking Installation Tool? 159 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
Wrench Set,Ratchet 15 Items
What is a Sealant Dispenser? 26 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Retaining Ring Pliers Set? 10 Items: A Retaining Ring Pliers Set (PLIERS SET,RETAINING RING) is a group of PLIERS, RETAINING RING having different characteristics.
What is a Hand Armament Subsystem Carrier? 52 Items: A Hand Armament Subsystem Carrier (CARRIER,ARMAMENT SUBSYSTEM,HAND) is a metallic item with a clamp device and/or space for depositing articles. It is used for transporting weapon parts during maintanence and/or repair work, such as gun barrel, automatic loader, breechblock and the like.
What is a Ring Retaining Pliers Tip Set? 13 Items: A Ring Retaining Pliers Tip Set (TIP SET,PLIERS,RING RETAINING) is a collection of removable metallic tips in matched pairs used to provide various size capablities to PLIERS, RING RETAINING which permits the removal and installation of internal and external retaining rings.
What is a Plug Electrical Connector Extractor? 45 Items: A Plug Electrical Connector Extractor (EXTRACTOR,ELECTRICAL CONNECTOR,PLUG) is a hand tool designed to disassemble CONNECTOR, PLUG, ELECTRICAL from a CONNECTOR, RECEPTACLE, ELECTRICAL.
What is a Torque Wrench Adapter Set? 10 Items: A Torque Wrench Adapter Set (ADAPTER SET,TORQUE WRENCH) is tWO or more ADAPTER, TORQUE WRENCH of different sizes.
What is an Electronic Component Inserter And Remover? 79 Items: An Electronic Component Inserter And Remover (INSERTER AND REMOVER,ELECTRONIC COMPONENT) is an item which can insert or remove an electronic component package such as MICROCIRCUIT; RESISTOR, NETWORK (as modified); and the like from its mounting position or socket. Excludes INSERTER AND REMOVER, ELECTRICAL CONTACT; REMOVER, ELECTRICAL CONTACT; EXTRACTOR, ELECTRICAL CARD; EXTRACTOR, ELECTRONIC CRYSTAL UNIT; EXTRACTOR, ELECTRON TUBE.
What is an Impact Type Bit Set And Handle Screwdriver? 14 Items: An Impact Type Bit Set And Handle Screwdriver (SCREWDRIVER,BIT SET AND HANDLE,IMPACT TYPE) is an item consisting of a set of screwdriver bits and a impact driver to accommodate the bits of various types and characteristics. It is designed to transmit a strong rotating movement by the impact of a hammer blowed on the impact driver. It is used to loosen rusted or seized screws. Excludes SCREWDRIVER, BIT SET AND HANDLE.
What is a Hand Vise Jaw? 19 Items: A Hand Vise Jaw (JAW,VISE,HAND) is an item consisting of two opposing parts of a VISE, HAND. The item is moveable and able to open and close. It can hold, grasp or clamp work.
What is a Screwdriver Handle? 28 Items: A Screwdriver Handle (HANDLE,SCREWDRIVER) is an item used to accommodate various types of BIT, SCREWDRIVER. It is designed to rotate a bit that is used for installing or removing screws.
What is a Wire Twister Pliers? 25 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 284 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is a Mechanical Puller Body? 45 Items: A Mechanical Puller Body (BODY,PULLER,MECHANICAL) is an item designed to support and enclose the internal parts of a PULLER,MECHANICAL.
What is a Flat Tip And Cross Tip Screwdriver Set? 39 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is a Socket Wrench Screwdriver Attachment Set? 22 Items: A Socket Wrench Screwdriver Attachment Set (SCREWDRIVER ATTACHMENT SET,SOCKET WRENCH) is a set of screwdriver attachment, socket wrench of different sizes. Items consist of a female square drive on one end to attach to a handle, socket wrench and various screwdriver tip configurations on the opposite end. Excludes SCREWDRIVER ATTACHMENT,SOCKET WRENCH
What is an Oil Filter Wrench? 44 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 430 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Communications Equipment Spring Adjuster? 13 Items: A Communications Equipment Spring Adjuster (ADJUSTER,SPRING,COMMUNICATIONS EQUIPMENT) is a single or double end tool, equipped with slot(s) of various dimensions or with cylindrical rod(s), used for adjusting the springs or spring tensioned parts of electronic equipment.
What is a Rotating Members Aligning Tool? 32 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
What is a Final Drive Assembly Alignment Pin? 41 Items: A Final Drive Assembly Alignment Pin (ALIGNMENT PIN,FINAL DRIVE ASSEMBLY) is a special designed pin used in the assembling of the final drive.
Arm,Handling Tool 77 Items
What is a Splicing Sleeve Compressing Tool? 23 Items: A Splicing Sleeve Compressing Tool (COMPRESSING TOOL,SPLICING SLEEVE) is a hand tool having hinged leverage handles similar to a CUTTER, BOLT or pliers, designed to compress a splicing sleeve when joining the ends of two conductors, or when forming an eye splice in the end of a wire rope. Excludes CRIMPING TOOL, TERMINAL, HAND.
What is a Hand Screw Jack Extension? 14 Items: A Hand Screw Jack Extension (EXTENSION,HAND SCREW JACK) is a length of externally threaded rigid shafting which is the adjustable section of a JACK, SCREW, HAND.
What is a Mechanical Puller Gear Adapter? 21 Items: A Mechanical Puller Gear Adapter (GEAR ADAPTER,PULLER,MECHANICAL) is an adapter that adapts a PULLER,MECHANICAL, to pull a certain gear.
Handle,Hydraulic Jack 18 Items
What is a Female Electrical Contact Resizing Tool? 11 Items: A Female Electrical Contact Resizing Tool (RESIZING TOOL,FEMALE ELECTRICAL CONTACT) is a tool designed to shape to a specific size, female contacts such as those used on electrical connectors, tube sockets, crystal sockets, and pin jacks.
What is a Screwdriver And Socket Wrench Combination? 13 Items: A Screwdriver And Socket Wrench Combination is a hand-tool formed into an integral unit with a socket wrench at one end and a screwdriver bit at the other end. See also SCREWDRIVER AND WRENCH ASSEMBLY.
What is a Hand Hose Fitting Swaging Tool Kit? 11 Items: A Hand Hose Fitting Swaging Tool Kit (SWAGING TOOL KIT,HOSE FITTING,HAND) is a device, hydraulically actuated by hand or power operated pump, consisting of face plate, adapter plate, finger cages, fingers, ram, bushing, and expanding mandrels combined on a single base in various functional arrangements. It is used for swaging the outside diameter of hose assembly fittings, expanding the inside diameter of hose assemblies, and securing the fabrication of hose assemblies. Included are a hand or power operated pump, lubricant, cases, and trays.
What is a Catch Lever Tool? 12 Items: A Catch Lever Tool (LEVER TOOL,CATCH) is a specially designed hand tool which engages the opening and closing lever of a CATCH (as modified) for ease of operation. It is constructed of thin rigid material, usually flat, and one end has an engaging tongue.
What is a Manual Impact Wrench? 11 Items: A Manual Impact Wrench (WRENCH,IMPACT,MANUAL) is a manually operated handheld tool consisting of spring-loaded handle and a power-impact head which delivers a torsional impact from either continuous movement of the handle in one direction, or by a reciprocating action. It is used in tightening and loosening fasteners, such as bolts, nuts, and the like. The item may include sockets, extensions and offset fittings, nut runners, and the like.
What is a Drift? 63 Items: A Drift is an item consisting of a tubular body fitted with replaceable tips. It is designed to insert or remove mechanical components where space is restricted.
What is a Nutdriver? 46 Items: A Nutdriver is a non-powered hand tool with a screwdriver style handle, shaft and formed female hex or square socket at driving end.
What is a Locking Device Removal Tool? 12 Items: A Locking Device Removal Tool (REMOVAL TOOL,LOCKING DEVICE) is a hand tool designed to facilitate the removal of a WASHER, KEY and a LOCKING PLATE, NUT AND BOLT.
What is a Hydraulic Fitting Crimping Tool Head? 26 Items: A Hydraulic Fitting Crimping Tool Head (HEAD,CRIMPING TOOL,HYDRAULIC FITTING) is a component of a crimping tool used to compress fittings on fluid tubes. It consists of a U-shape item, in which, are mounted different sizes of DIE, CRIMPING TOOL for tubes of various diameters.
What is a Torque Screwdriver? 11 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.
What is a Special Purpose Combination Wrench? 13 Items: A Special Purpose Combination Wrench (WRENCH,COMBINATION,SPECIAL PURPOSE) is a tool having a combination of ends and facets. The ends may have open end, box or spanner characteristics. The sides may have features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s). Designed to fit specific items, not sized as standard or metric.
What is a Screwdriver Bit Holder? 56 Items: A Screwdriver Bit Holder (HOLDER,SCREWDRIVER BIT) is an attachment with a socket end for accepting male hexagon shank insert bits and a drive end for adapting to a portable power or hand tool.
What is a Telescoping Pole? 16 Items: A Telescoping Pole (POLE,TELESCOPING) is an item which is designed to be extended or compressed by the sliding of overlapping sections. This item may or may not be able to accommodate an extension.

Stock Items From Supply Class 5120 Page 104 of 110

5120-14-405-3300
Spanner Wrench

144053300
12-520-104: RNCC: 3 | RNVC: 9

27 Nov 1985

5120-14-349-8663
Spanner Wrench

143498663
0427-02007: RNCC: 3 | RNVC: 2

14 Jun 1978

5120-14-400-0134
Electrical Contact Remover

144000134
8400-980A: RNCC: 3 | RNVC: 2
8400-980: RNCC: 5 | RNVC: 2

24 Apr 1985

5120-14-468-9810
Seal Inserter And Remover

144689810
40N108118-2: RNCC: 3 | RNVC: 2

30 Mar 1994

5120-14-218-6732

5120-14-453-8745
Hand Terminal Crimping Tool

144538745
169400-169404: RNCC: 3 | RNVC: 2
0-0169400-0+0-0169404-0: RNCC: 5 | RNVC: 2

12 Mar 1992

5120-14-266-7004

5120-14-383-0883
Cont Jeux Com Moule

143830883
9970-121-170: RNCC: 3 | RNVC: 2

17 Mar 1983

5120-14-575-8483
Mechanical Puller S

145758483
TM5400P005: RNCC: 3 | RNVC: 2

7 May 2013

5120-14-264-0595

5120-14-226-3722

5120-14-548-4367
Bearing And Bushing Inserter And Remover

145484367
U.49P8: RNCC: 3 | RNVC: 2

17 Jan 2006

5120-14-549-1279
Screwdriver Bit

145491279
NEV-1-9: RNCC: 3 | RNVC: 2

2 Mar 2006

5120-14-445-3154
Socket Wrench Screwdriver Attachment

144453154
ES.106,5: RNCC: 3 | RNVC: 2
3148510245973: RNCC: 5 | RNVC: 2
ES106-5: RNCC: 5 | RNVC: 2
0614 177 973: RNCC: 5 | RNVC: 2
0024597: RNCC: 5 | RNVC: 9

11 Feb 1991

5120-14-405-6746
Compression R Outil

144056746
RT3581: RNCC: 3 | RNVC: 2

4 Dec 1985

5120-14-572-9367
Spanner Wrench Set

145729367
46139663: RNCC: 3 | RNVC: 2

29 Aug 2012

5120-14-316-1582
Mandrin Pose Bague

143161582
C66082: RNCC: 3 | RNVC: 2
100998: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-566-2547
Seal Inserter And Remover

145662547
99340056: RNCC: 3 | RNVC: 2

2 Nov 2010

5120-14-246-4407

5120-14-292-7386

5120-14-493-1277
Cle

144931277
NO PRIMARY REF14-493-1277: RNCC: 3 | RNVC: 2
5000261623: RNCC: 5 | RNVC: 9
F300 0T 010 4186: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-331-5285
Spanner Wrench

143315285
NO PRIMARY REF14-331-5285: RNCC: 3 | RNVC: 2
1546W2: RNCC: 5 | RNVC: 9

2 Jul 1975

5120-14-326-1423
Levier Pour Tendeur

143261423
73115-01-22P4REP3: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-332-8869
Spanner Wrench

143328869
50484: RNCC: 3 | RNVC: 2
50484: RNCC: 5 | RNVC: 2
6511-50484: RNCC: 5 | RNVC: 2

2 Jul 1975

5120-14-476-3269
Socket Wrench Socket

144763269
S.21LA: RNCC: 3 | RNVC: 2
3148510553955: RNCC: 5 | RNVC: 2
235-4309: RNCC: 5 | RNVC: 2
0055395: RNCC: 5 | RNVC: 9
FACOMS.21LA: RNCC: 5 | RNVC: 9

7 Jun 1995

5120-14-536-8289
Socket Wrench Socket

145368289
OCE91-113-I: RNCC: 3 | RNVC: 2
8048143M00: RNCC: 5 | RNVC: 2

17 Sep 2003

5120-14-490-6970
Refacer

144906970
241 R 02330 100: RNCC: 3 | RNVC: 2
F300 0T 000 1125: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-392-5447
Manutention Outil

143925447
098029-4: RNCC: 3 | RNVC: 2

21 Mar 1984

5120-14-572-1117
Socket Wrench Set

145721117
R.360NANO: RNCC: 3 | RNVC: 2
R.360NANOPB: RNCC: 5 | RNVC: 2
3148518590778: RNCC: 5 | RNVC: 2

7 Jun 2012

5120-14-483-6161
Pilote D5

144836161
9-33-26-05-050: RNCC: 3 | RNVC: 2

24 Sep 1996

5120-14-386-8429
Terminal Crimping Tool Contact Positioner

143868429
K338-1: RNCC: 3 | RNVC: 2
85-801-0423: RNCC: 6 | RNVC: 9

24 Aug 1983

5120-14-229-5584
Extracteur Du Rotor

142295584
A160-2396DEM1: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-326-1424
Outils Vis De Purge

143261424
73115-01-22P6REP6: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-371-4264
Spanner Wrench

143714264
6254-57039: RNCC: 3 | RNVC: 2

5 Aug 1981

5120-14-346-0143
Spanner Wrench

143460143
NO PRIMARY REF14-346-0143: RNCC: 3 | RNVC: 2
341629: RNCC: 5 | RNVC: 9
85-689-4301: RNCC: 6 | RNVC: 9

5 Nov 1977

5120-14-321-8505
Spanner Wrench

143218505
6521773: RNCC: 3 | RNVC: 2
6521773: RNCC: 5 | RNVC: 1
85-626-7222: RNCC: 6 | RNVC: 9

1 Jan 1975

5120-14-209-5122
Cle Aencoches Speci

142095122
M3-002: RNCC: 3 | RNVC: 2
M3002: RNCC: 5 | RNVC: 2
M3-002: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-432-5027
Spanner Wrench

144325027
332A93-4100-00: RNCC: 3 | RNVC: 2

14 Jun 1989

5120-14-272-7581
Spanner Wrench

142727581
D1553-4803: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-201-2188
Socket Wrench Socket

142012188
0055780: RNCC: 3 | RNVC: 2
S.7/8L: RNCC: 5 | RNVC: 2
S7-8L: RNCC: 5 | RNVC: 2

1 Jan 1962

5120-14-415-7901
Screw Push-Pull Jack

144157901
03-08-250-101-1300N: RNCC: 3 | RNVC: 9

18 May 1987

5120-14-442-8470
Socket Wrench Handle

144428470
4178-194-000: RNCC: 3 | RNVC: 2
4178-194-000: RNCC: 5 | RNVC: 2

7 Nov 1990

5120-14-238-5447
Craftsman's Tweezers

142385447
NO PRIMARY REF14-238-5447: RNCC: 3 | RNVC: 2
2113-44N7: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-395-4096
Manipulation Outil

143954096
2-36940: RNCC: 3 | RNVC: 2

11 Oct 1984

5120-14-274-8687

5120-14-409-5140
Bearing And Bushing Inserter And Remover

144095140
8814071000: RNCC: 3 | RNVC: 2

28 May 1986

5120-14-443-2884
Manual Control Lever

144432884
1786426A: RNCC: 3 | RNVC: 2

14 Nov 1990

5120-14-426-5150
Craftsman's Tweezers

144265150
144: RNCC: 3 | RNVC: 2
1011871K00: RNCC: 5 | RNVC: 2
144: RNCC: 5 | RNVC: 2
3148511376201: RNCC: 5 | RNVC: 2
0137620: RNCC: 5 | RNVC: 9

7 Sep 1988

5120-14-281-2890
Cle De Blocage Bout

142812890
0M419: RNCC: 3 | RNVC: 2
505UA9732: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-214-4151

5120-14-404-5981
Spanner Wrench

144045981
87338: RNCC: 3 | RNVC: 2
7511 111 93651: RNCC: 5 | RNVC: 2
7511-111-93651: RNCC: 5 | RNVC: 2

20 Nov 1985

5120-14-272-3713
Open End Wrench

142723713
E74302R13-14BAW: RNCC: 2 | RNVC: 1

1 Jan 1971

5120-14-298-2622
Spanner Wrench

142982622
3511-961-26371: RNCC: 3 | RNVC: 2
3511 961 26371: RNCC: 5 | RNVC: 2
MQ12637: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-366-1658
Impact Type Bit Set And Handle Screwdriver

143661658
NJ.260: RNCC: 3 | RNVC: 2
NJ260: RNCC: 5 | RNVC: 2
0220454W00: RNCC: 5 | RNVC: 2
NJ260: RNCC: 5 | RNVC: 2
91711377: RNCC: 5 | RNVC: 2
3148510363509: RNCC: 5 | RNVC: 2
0036350: RNCC: 5 | RNVC: 9
85-691-1507: RNCC: 6 | RNVC: 9

4 Nov 1980

5120-14-376-8607
Plaquette Montage

143768607
48845: RNCC: 3 | RNVC: 2
22-09-48845: RNCC: 5 | RNVC: 2

28 Apr 1982

5120-14-385-3430
Bearing And Bushing Inserter

143853430
6803F34-1034-20: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-386-5749
Modif Resist Outil

143865749
NO PRIMARY REF14-386-5749: RNCC: 3 | RNVC: 2
34-22-04-458: RNCC: 5 | RNVC: 9

24 Aug 1983

5120-14-488-3127
Socket Head Screw Key

144883127
83H.5/32: RNCC: 3 | RNVC: 2
0124481: RNCC: 5 | RNVC: 2
3148511244814: RNCC: 5 | RNVC: 2
83H5-32: RNCC: 5 | RNVC: 2
0715 311 31: RNCC: 5 | RNVC: 2

30 Apr 1997

5120-14-276-3097
Socket Wrench Socket

142763097
M.2'3/16: RNCC: 3 | RNVC: 2
M-2'3/16: RNCC: 3 | RNVC: 2
M2 3-16: RNCC: 3 | RNVC: 2
3148510321202: RNCC: 5 | RNVC: 2
M2 3-16: RNCC: 5 | RNVC: 2
3272670270268: RNCC: 5 | RNVC: 2
0032120: RNCC: 5 | RNVC: 9
M2P0UCES3-16: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-396-2330
Mec Extrateur Corps

143962330
90890-02329: RNCC: 3 | RNVC: 2

27 Nov 1984

5120-14-031-9141
A Fourche Cle

5120-14-416-5002
Cliquet Ressort

144165002
1841-2: RNCC: 3 | RNVC: 2

10 Jun 1987

5120-14-370-1234
Couteau A Mastic

143701234
CALEAENDUIRE: RNCC: 3 | RNVC: 2
130548: RNCC: 5 | RNVC: 2
C0P2893: RNCC: 5 | RNVC: 9

18 May 1981

5120-14-490-6917
Die

144906917
241 D 00865 075: RNCC: 3 | RNVC: 2
F300 0T 000 1047: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-438-2585
Screwdriver Bit

144382585
ENS.206,5: RNCC: 3 | RNVC: 2
ENS206,5: RNCC: 5 | RNVC: 2
91711375: RNCC: 5 | RNVC: 2
3148510239132: RNCC: 5 | RNVC: 2
0023913: RNCC: 5 | RNVC: 9

12 Mar 1990

5120-14-369-6673
Outil A Positionner

143696673
282975: RNCC: 3 | RNVC: 2
R282975: RNCC: 5 | RNVC: 2
282975: RNCC: 5 | RNVC: 2

17 Apr 1981

5120-14-202-0419
Blacksmith's Flatter

142020419
0013500301: RNCC: 3 | RNVC: 2
M0B13-50EC: RNCC: 3 | RNVC: 2
10-50EMMANCHE: RNCC: 5 | RNVC: 9

1 Jan 1963

5120-14-387-5019
Outillage Regla Pie

143875019
38-3-96-272: RNCC: 3 | RNVC: 2

15 Sep 1983

5120-14-271-6996
Vis De Presse Ordin

142716996
4554-30: RNCC: 3 | RNVC: 9

1 Jan 1970

5120-14-342-8457
De Capot Cle

143428457
NO PRIMARY REF14-342-8457: RNCC: 3 | RNVC: 2
FH137-921: RNCC: 5 | RNVC: 2
85-658-4663: RNCC: 5 | RNVC: 2

6 Aug 1997

5120-14-379-8422
Spanner Wrench

143798422
6801M10-0065-20: RNCC: 3 | RNVC: 2
6801.702A.10.0065.20: RNCC: 5 | RNVC: 2

20 Oct 1982

5120-14-393-8850
Bague De Retrait

143938850
NO PRIMARY REF14-393-8850: RNCC: 3 | RNVC: 2
OU136842: RNCC: 5 | RNVC: 9

23 Jun 1984

5120-14-445-9752
Spanner Wrench

144459752
0S21560: RNCC: 3 | RNVC: 2
85-694-3591: RNCC: 6 | RNVC: 9

27 Feb 1991

5120-14-463-9745
Open End Wrench

144639745
854-400-364-0: RNCC: 3 | RNVC: 2

7 Jul 1993

5120-14-362-6805
Pince A Freiner

143626805
9970-121-224: RNCC: 3 | RNVC: 2

19 Mar 1980

5120-14-254-3794

5120-14-490-6954
Handle

144906954
241 H 01507 035: RNCC: 3 | RNVC: 2
F300 0T 000 1091: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-219-4112
Obus De Montage

142194112
17-9-39: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-223-9246
Tas A Sertir Specia

142239246
A90398: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-277-3747
Defreinoir

142773747
8810003010: RNCC: 3 | RNVC: 2
0T2-2-31: RNCC: 5 | RNVC: 9
0T2-2-31: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-315-1889
Chasse-Joint Ensemb

143151889
0-701829: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-552-5599
Socket Wrench Socket

145525599
R.12AVSE: RNCC: 3 | RNVC: 2
R.12AVSE: RNCC: 5 | RNVC: 2

16 Jan 2007

5120-14-468-9665
Ring Retaining Pliers Tip Set

144689665
113.15-2: RNCC: 3 | RNVC: 2
3148511330005: RNCC: 5 | RNVC: 2
0133000: RNCC: 5 | RNVC: 9

30 Mar 1994

5120-14-396-7982

5120-14-282-8784
Spanner Wrench

142828784
0234-78: RNCC: 3 | RNVC: 2
272404: RNCC: 5 | RNVC: 2
RA234: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-364-4101
Essais Clapet Bloc

143644101
UKB233-41: RNCC: 3 | RNVC: 2
MKB233-41: RNCC: 5 | RNVC: 2

7 Aug 1980

5120-14-487-6650
Jauge Posit.Connect

144876650
8969-71100A: RNCC: 3 | RNVC: 2

18 Apr 1997

5120-14-483-0715
Open End Wrench

144830715
18.11/16: RNCC: 3 | RNVC: 2
3148510933955: RNCC: 5 | RNVC: 2
0093395: RNCC: 5 | RNVC: 9
093395: RNCC: 5 | RNVC: 9

8 Aug 1996

5120-14-242-2865
Pliers

142422865
E77-003-12: RNCC: 2 | RNVC: 2

1 Jan 1967

5120-14-220-5152
Tas Demmanchement

142205152
3160S95-33-008: RNCC: 3 | RNVC: 2
3160-95-33-008: RNCC: 5 | RNVC: 2

1 Jan 1965

5120-14-212-9148
Cle Pour Ecrous Den

142129148
9970-115-013: RNCC: 3 | RNVC: 2
9970-115-013-01: RNCC: 3 | RNVC: 2
171-155: RNCC: 5 | RNVC: 2

1 Jan 1964

5120-14-450-3102
Roulement Coupelle

144503102
30AM131-08: RNCC: 3 | RNVC: 2

25 Sep 1991

5120-14-241-1520
Cle A Ergots Specia

142411520
0778-78: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-241-1473
Cle A Ergots Specia

142411473
0666-78: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-573-4084
Ratchet Wrench Set

145734084
CC200NE-P: RNCC: 3 | RNVC: 2

10 Oct 2012

5120-14-573-8668
Screwdriver Bit

145738668
EH.002,5: RNCC: 3 | RNVC: 2
0023256: RNCC: 5 | RNVC: 2
3148510232560: RNCC: 5 | RNVC: 2

16 Nov 2012

5120-14-488-9507
Montage D Essais

144889507
24363: RNCC: 3 | RNVC: 2

13 Jun 1997

5120-14-571-5497
Industrial S Needle

145715497
5118: RNCC: 3 | RNVC: 2
5118 ROSE: RNCC: 5 | RNVC: 2

4 Apr 2012

5120-14-481-2072
Socket Wrench Ratchet Attachment

144812072
J.372: RNCC: 3 | RNVC: 2
3148510291055: RNCC: 5 | RNVC: 2
1009569E00: RNCC: 5 | RNVC: 2
0029105: RNCC: 5 | RNVC: 2

25 Apr 1996

5120-14-548-5064
Socket Wrench Socket

145485064
K.40HB: RNCC: 3 | RNVC: 2
00.51.83.42: RNCC: 5 | RNVC: 2

23 Jan 2006

5120-14-565-2582
Socket Wrench Extension

145652582
S.215RC: RNCC: 3 | RNVC: 2
A251403000151: RNCC: 5 | RNVC: 2

2 Aug 2010

5120-14-370-9519
Outil Dewrappeur

143709519
TL23-8: RNCC: 3 | RNVC: 2
SE238: RNCC: 5 | RNVC: 2

5 Jun 1981

5120-14-490-6886
Drill

144906886
240 D 01884 014: RNCC: 3 | RNVC: 2
F300 0T 000 0995: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-514-8392
Cross Tip Screwdriver

145148392
ENFD6568-2X300: RNCC: 3 | RNVC: 2

21 Jun 1999

5120-14-447-3445
Spanner Wrench

144473445
NO PRIMARY REF14-447-3445: RNCC: 3 | RNVC: 2
89280751: RNCC: 5 | RNVC: 2
300A98629: RNCC: 5 | RNVC: 9

15 May 1991

5120-14-269-0127
Goujonniere

142690127
352-16: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-432-1990
Pointe A Ferrer

144321990
3719100: RNCC: 3 | RNVC: 2

26 May 1989

5120-14-219-3654
Cle Bouchon De Bach

142193654
3-43882: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-209-5132
Cle Bouchon De Vida

142095132
M3-088: RNCC: 3 | RNVC: 2
M3-088: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-217-9970
Cle Dynamometrique

142179970
D2-23: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-212-9156
Cle Speciale Pour E

142129156
9970-115-164-01: RNCC: 3 | RNVC: 2
9970-115-164: RNCC: 3 | RNVC: 2

1 Jan 1964

5120-14-447-6359
Screwdriver Bit Set And Handle

144476359
616-22155-00: RNCC: 3 | RNVC: 2

29 May 1991

5120-14-447-3417
Combination Box And Open End Wrench

144473417
39.5H: RNCC: 3 | RNVC: 2
3148510998640: RNCC: 5 | RNVC: 2
39-5H: RNCC: 5 | RNVC: 2
91714506: RNCC: 5 | RNVC: 2
0099864: RNCC: 5 | RNVC: 9

15 May 1991

5120-14-360-5256
Spanner Wrench

143605256
7062RURP40-25-50IN0XAMAGNETIQUE: RNCC: 2 | RNVC: 2

23 Nov 1979

5120-14-516-9016
Socket Head Screw Key

145169016
83H.3/32: RNCC: 3 | RNVC: 2

20 Oct 1999

5120-14-476-3846
Obturation Broche

144763846
OUT60255-7: RNCC: 3 | RNVC: 2

7 Jun 1995

5120-14-257-5048
Communications Equipment Spring Adjuster

142575048
NO PRIMARY REF14-257-5048: RNCC: 3 | RNVC: 2
2650-4: RNCC: 5 | RNVC: 9
2650-4C: RNCC: 5 | RNVC: 9
85-635-9590: RNCC: 6 | RNVC: 9
00-230-7902: RNCC: 6 | RNVC: 9

1 Jan 1969

5120-14-428-1997
Cle A Volant

144281997
COM225-54PETITMODELE: RNCC: 2 | RNVC: 2

6 Dec 1988

5120-14-338-4724
Outil Maintie Corps

143384724
C46295-1: RNCC: 3 | RNVC: 2

6 Nov 1976

5120-14-267-4507
Matrice Pour Pince

142674507
69206-1: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-578-1438
Mechanical Puller S

145781438
8818804001: RNCC: 3 | RNVC: 2

5 Nov 2013

5120-14-426-8337
Socket Head Screw Key

144268337
0372-42-10066: RNCC: 3 | RNVC: 2

23 Sep 1988

5120-14-393-4119
Socket Head Screw Key

143934119
80-16: RNCC: 3 | RNVC: 2
61-M16: RNCC: 3 | RNVC: 2
61.M16: RNCC: 3 | RNVC: 2
3148511221105: RNCC: 5 | RNVC: 2
3272670274792: RNCC: 5 | RNVC: 2

7 Apr 1984

5120-14-333-8609
Spanner Wrench

143338609
9970-115-598: RNCC: 3 | RNVC: 2

23 Apr 1976

5120-14-280-2194
Casque Carre Ferme

142802194
NO PRIMARY REF14-280-2194: RNCC: 3 | RNVC: 2
161: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-462-8611
Spanner Wrench

144628611
C47816: RNCC: 3 | RNVC: 2
85-694-6703: RNCC: 6 | RNVC: 9

5 May 1993

5120-14-319-4519
Bearing And Bushing Inserter And Remover

143194519
3130S95-47-003: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-417-6725
Open End Wrench

144176725
10-14X16CM: RNCC: 3 | RNVC: 2
10-14X16C: RNCC: 5 | RNVC: 2

22 Jul 1987

5120-14-425-1716
Matrice

144251716
8463-16: RNCC: 3 | RNVC: 2

23 Jun 1988

5120-14-350-0285
Mechanical Puller Attachment

143500285
3130S98-04-701-1: RNCC: 3 | RNVC: 2

14 Jun 1978

5120-14-443-6337
Cle Coudee

144436337
NO PRIMARY REF14-443-6337: RNCC: 3 | RNVC: 2
OU136395: RNCC: 5 | RNVC: 9

30 Nov 1990

5120-14-359-9451
Lampe A Sou Bruleur

143599451
2316: RNCC: 3 | RNVC: 2
S0UD01550: RNCC: 3 | RNVC: 2

15 Oct 1979

5120-14-576-6306
Mechanical Puller S

145766306
8812167003: RNCC: 3 | RNVC: 2

2 Jul 2013

5120-14-364-6348
Culbute Reglage Cle

143646348
T.251: RNCC: 3 | RNVC: 2
3148510651101: RNCC: 5 | RNVC: 2
T251: RNCC: 5 | RNVC: 2
R0CU: RNCC: 5 | RNVC: 2
0001057800: RNCC: 5 | RNVC: 2
M0T13: RNCC: 5 | RNVC: 2
0065110: RNCC: 5 | RNVC: 9

2 Sep 1980

5120-14-206-7702
Barre De Verin A Vi

142067702
291US20T5030: RNCC: 3 | RNVC: 2

1 Jan 1964

5120-14-509-0532
Deverrouillag Pince

145090532
809860: RNCC: 3 | RNVC: 2

19 Oct 1998

5120-14-476-5213
Damper Ecrou Guide

144765213
008949010P: RNCC: 3 | RNVC: 2

19 Jun 1995

5120-14-224-9895
Open End Wrench

142249895
10A18: RNCC: 3 | RNVC: 2
M6-063: RNCC: 5 | RNVC: 2

1 Jan 1966

5120-14-541-9296
Electrical Connector Inserter

145419296
T884G30T0001: RNCC: 1 | RNVC: 2
756-8010-00: RNCC: 3 | RNVC: 2

2 Jul 2004

5120-14-410-1560
Ergots Jeu

144101560
MUP5443-6: RNCC: 3 | RNVC: 2
5120-A1-000-4093: RNCC: 6 | RNVC: 9

4 Jun 1986

5120-14-231-9945
Cle A Fourche Speci

142319945
M16-005: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-212-9564
Cle De Turbine Spec

142129564
NO PRIMARY REF14-212-9564: RNCC: 3 | RNVC: 2
156475: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-448-9600
Socket Head Screw Key

144489600
0123240: RNCC: 3 | RNVC: 2
82-27: RNCC: 5 | RNVC: 2

24 Jul 1991

5120-14-265-3208
Socket Head Screw Key

142653208
16401546: RNCC: 3 | RNVC: 2
16401546-9: RNCC: 5 | RNVC: 2
16401552: RNCC: 5 | RNVC: 2
16401552-6: RNCC: 5 | RNVC: 2
HK1-16: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-479-0294
Face Spanner Wrench Socket

144790294
888-358-900-1: RNCC: 3 | RNVC: 2

6 Dec 1995

5120-14-421-2777
Socket Wrench Handle

144212777
16300856: RNCC: 1 | RNVC: 2
65-7-01-044G00-554710F: RNCC: 3 | RNVC: 2
0417984D00: RNCC: 5 | RNVC: 2
16300856: RNCC: 5 | RNVC: 9

14 Jan 1988

5120-14-329-4033
Socket Head Screw Key

143294033
99-250-05-010-2: RNCC: 3 | RNVC: 2
99250050102: RNCC: 3 | RNVC: 2
GESM827390: RNCC: 5 | RNVC: 2
431205: RNCC: 5 | RNVC: 2

2 Jul 1975

5120-14-522-1019
Equipee Cle

145221019
45271966: RNCC: 3 | RNVC: 2

4 Oct 2000

5120-14-225-5712

5120-14-401-5655
Plat Cycliqu Extrac

144015655
350A93-3710-00: RNCC: 3 | RNVC: 2

13 Jun 1985

5120-14-274-8681
Bague De Cone

142748681
33539: RNCC: 3 | RNVC: 2
R31674-18-18R29-3: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-241-6289
Cle A Ergots Preaff

142416289
1050-95-501-00: RNCC: 3 | RNVC: 2
95-501-00: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-402-6718
Wrench Kit

144026718
1909-19-00: RNCC: 3 | RNVC: 9
1909-19FN: RNCC: 5 | RNVC: 9

19 Jul 1985

5120-14-215-9632
Cle A Panier Hexago

142159632
773-411-003F5-43SURPLATS: RNCC: 3 | RNVC: 2
773-411-003F5-43SURPLATS: RNCC: 5 | RNVC: 9
773-411-003FF5-43SURPLATS: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-213-5212
Preformed Packing Remover

142135212
0-50716-1: RNCC: 3 | RNVC: 2
50716: RNCC: 5 | RNVC: 2

1 Jan 1964

5120-14-276-2308

5120-14-354-6721

5120-14-368-4108
Outillage De Pose

143684108
8812436000: RNCC: 3 | RNVC: 2

20 Feb 1981

5120-14-270-8740

5120-14-364-7916
Outillag Pantograph

143647916
202000: RNCC: 3 | RNVC: 2

2 Sep 1980

5120-14-212-0112

5120-14-388-5493
Meca Ext Axe Remont

143885493
9970-125-721: RNCC: 3 | RNVC: 2

3 Nov 1983

5120-14-475-6952
Open End Wrench

144756952
NO PRIMARY REF14-475-6952: RNCC: 3 | RNVC: 2
SP4909: RNCC: 5 | RNVC: 2
91741765: RNCC: 5 | RNVC: 2

26 Apr 1995

5120-14-469-3631
Plug Electrical Connector Extractor

144693631
8180-T00-000-01A: RNCC: 3 | RNVC: 2
8180-T00-000-01A: RNCC: 5 | RNVC: 2

20 Apr 1994

5120-14-377-2790
Spanner Wrench

143772790
TMY20-32-510: RNCC: 3 | RNVC: 2

17 May 1982

5120-14-254-5615
Open End Wrench

142545615
26455: RNCC: 3 | RNVC: 2

1 Jan 1969

5120-14-433-1397
Bearing And Bushing Inserter And Remover

144331397
45152158: RNCC: 3 | RNVC: 2

11 Jul 1989

5120-14-571-6896
Socket Wrench

145716896
92A.7: RNCC: 3 | RNVC: 2
662899: RNCC: 5 | RNVC: 9

23 Apr 2012

5120-14-544-2344
Open End Wrench

145442344
MAI 500 123-1: RNCC: 3 | RNVC: 2

12 Jan 2005

5120-14-483-8584
Bearing Staking Installation Tool

144838584
0-52543-2: RNCC: 3 | RNVC: 2

5 Oct 1996

5120-14-439-1446
Cantilever Jaw Clamp

144391446
20181427: RNCC: 3 | RNVC: 2
20181427: RNCC: 5 | RNVC: 9

25 Apr 1990

5120-14-376-2296

5120-14-266-6694

5120-14-489-3460
Hand Tube Swaging Tool Kit

144893460
853-600-303-0: RNCC: 3 | RNVC: 2

9 Jul 1997

5120-14-362-6803
Poignee Mise En Pla

143626803
9970-121-137: RNCC: 3 | RNVC: 2

19 Mar 1980

5120-14-435-0686
Face Spanner Wrench Socket

144350686
853-100-250-0: RNCC: 3 | RNVC: 2

18 Oct 1989

5120-14-302-6077
Flat Tip Screwdriver

143026077
AB4-5X50: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-406-5709
Face Spanner Wrench Socket

144065709
853-200-745-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-320-0751
Torque Wrench Adapter

143200751
D-38: RNCC: 3 | RNVC: 2
3272670261969: RNCC: 5 | RNVC: 2
D38: RNCC: 5 | RNVC: 2
D38: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-516-5314
Open End Wrench

145165314
20.9/16: RNCC: 3 | RNVC: 2

29 Sep 1999

5120-14-419-6524
Pistolet A Agrafer

144196524
T5-8: RNCC: 3 | RNVC: 2

29 Oct 1987

5120-14-540-7900
Hand Blind Riveter

145407900
RIVERMUS: RNCC: 3 | RNVC: 2

23 Apr 2004

5120-14-514-2103
Screw Thread Insert Inserter

145142103
01500783600: RNCC: 3 | RNVC: 2

28 Apr 1999

5120-14-351-2105
Open End Wrench

143512105
489047X: RNCC: 3 | RNVC: 2

10 Aug 1978

5120-14-332-8785
Combin Cle Speciale

143328785
TH20S1: RNCC: 3 | RNVC: 2
004733: RNCC: 5 | RNVC: 2
4733: RNCC: 5 | RNVC: 2
MAS4733: RNCC: 5 | RNVC: 2

2 Jul 1975

5120-14-530-3006
A Tete P Tournevis

145303006
AEFP.00X75E: RNCC: 3 | RNVC: 2
3148510049144: RNCC: 5 | RNVC: 2

29 May 2002

5120-14-214-2833
Cle A Freiner Et A

142142833
10-118: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-472-3518
Socket Head Screw Key

144723518
82H.5: RNCC: 3 | RNVC: 2
0715 31 40: RNCC: 5 | RNVC: 2
3148511230510: RNCC: 5 | RNVC: 2
0110675A00: RNCC: 5 | RNVC: 2
91778001: RNCC: 5 | RNVC: 2
0123051: RNCC: 5 | RNVC: 9

19 Oct 1994

5120-14-386-3949
Anneau M16-L-20

143863949
999506060051: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-424-7056
Screwdriver Bit

144247056
AMS.1: RNCC: 3 | RNVC: 2
3148510082202: RNCC: 5 | RNVC: 2
AMS-1: RNCC: 5 | RNVC: 2
0008220: RNCC: 5 | RNVC: 9

7 Jun 1988

5120-14-340-3948
Electrical Contact Remover

143403948
91074-1: RNCC: 3 | RNVC: 2
91074-1: RNCC: 5 | RNVC: 2

14 Feb 1977

5120-14-319-3062
Matrice De Sertissa

143193062
48824-2: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-546-1596
Spring Inserter And Remover

145461596
480080S100-01A: RNCC: 3 | RNVC: 2

15 Jun 2005

5120-14-204-3009
Cle Speciale

142043009
M3-056: RNCC: 3 | RNVC: 2

1 Jan 1963

5120-14-530-1018
Electrical Connector Inserter

145301018
45062100: RNCC: 3 | RNVC: 2

14 May 2002

5120-14-571-2251
Crimping Tool Die

145712251
985915: RNCC: 3 | RNVC: 2
FACOM 985915: RNCC: 5 | RNVC: 2

1 Mar 2012

5120-14-490-8637
Boite

144908637
4051 000 690 008: RNCC: 3 | RNVC: 2
F300 0T 000 4874: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-431-2686
Bearing And Bushing Remover

144312686
3160S95-68-070-1: RNCC: 3 | RNVC: 2

12 Apr 1989

5120-14-561-1777
Cross Tip Screwdriver

145611777
ANP2X100: RNCC: 3 | RNVC: 2
3148517733534: RNCC: 5 | RNVC: 2
773353: RNCC: 5 | RNVC: 2
FACOM ANP2X100: RNCC: 5 | RNVC: 2

23 Jun 2009

5120-14-557-8010
Seal Inserter

145578010
TM1079G002: RNCC: 3 | RNVC: 2

15 Jul 2008

5120-14-305-6188

5120-14-365-2581
Extracteur Vis

143652581
M31-126-1001: RNCC: 3 | RNVC: 2

19 Sep 1980

5120-14-211-3758
Cle De Vis De Liais

142113758
D2604-40-1: RNCC: 3 | RNVC: 2

1 Jan 1964

5120-14-393-9402

5120-14-288-2872

5120-14-401-5641
Tournevis Spec Mra

144015641
350A93-3315-00: RNCC: 3 | RNVC: 2

13 Jun 1985

5120-14-561-1529
Automatic Center Punch

145611529
257.G: RNCC: 3 | RNVC: 2
0160810: RNCC: 5 | RNVC: 2
257G: RNCC: 5 | RNVC: 2

22 Jun 2009

5120-14-561-1757
Combination Box And Open End Wrench

145611757
440.5,5H: RNCC: 3 | RNVC: 2
3148517679221: RNCC: 5 | RNVC: 2
767922: RNCC: 5 | RNVC: 2

23 Jun 2009

5120-14-566-1397
Palm-Grip Ratchet Wrench

145661397
J.171: RNCC: 3 | RNVC: 2
3148517703711: RNCC: 5 | RNVC: 2

21 Oct 2010

5120-14-551-1989
Combination Box And Open End Wrench

145511989
30-3: RNCC: 3 | RNVC: 2
30.3: RNCC: 3 | RNVC: 2

6 Sep 2006

5120-14-263-6765
Cle Blocage Helice

142636765
FH106-905: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-469-5551
Rodoir Joint Culass

144695551
25145900012: RNCC: 3 | RNVC: 2
361279-00: RNCC: 5 | RNVC: 2

2 May 1994

5120-14-459-0576
Socket Wrench Screwdriver Attachment

144590576
RX.6: RNCC: 3 | RNVC: 2
3148515144059: RNCC: 5 | RNVC: 2

18 Nov 1992

5120-14-286-0310
Cle Speciale

142860310
6424-0232: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-565-8897
Flat Tip Screwdriver

145658897
A2,5X50VE: RNCC: 3 | RNVC: 2

1 Oct 2010

5120-14-276-7778
Hand Terminal Crimping Tool

142767778
8452: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-259-8054
Cle Reglage Spheres

142598054
70726814: RNCC: 3 | RNVC: 2
70726814: RNCC: 5 | RNVC: 9
BE131540: RNCC: 5 | RNVC: 9

1 Jan 1969

5120-14-353-9386

5120-14-241-6034
Bloc De Presertissa

142416034
RMPS8M: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-343-1867
Crochet Dextracteur

143431867
205230: RNCC: 3 | RNVC: 2

16 Jun 1977

5120-14-352-3154
Mandrin Dextraction

143523154
MGA288-26: RNCC: 3 | RNVC: 2
MGA288-26: RNCC: 5 | RNVC: 2

16 Oct 1978

5120-14-333-3084
Cle Pour Bosse

143333084
BN311-545M7REP4: RNCC: 3 | RNVC: 2
GY18244C43-46: RNCC: 5 | RNVC: 2

2 Jul 1975

5120-14-377-3011
Comparateur Support

143773011
MJF327-22: RNCC: 3 | RNVC: 2
MJF327-22: RNCC: 5 | RNVC: 2

17 May 1982

5120-14-268-8610
Clavette Marteau Bo

142688610
E71-015-35: RNCC: 2 | RNVC: 2

1 Jan 1970

5120-14-219-0003
Plaquette Et Resist

142190003
NO PRIMARY REF14-219-0003: RNCC: 3 | RNVC: 2
22866E: RNCC: 5 | RNVC: 9
22866E: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-220-8201
Open End Wrench

142208201
BB99-46X50: RNCC: 3 | RNVC: 9

1 Jan 1965

5120-14-354-6755
Sangle Monte Piston

143546755
25545902100: RNCC: 3 | RNVC: 2
255459021: RNCC: 5 | RNVC: 9

31 Jan 1979

5120-14-371-2176

5120-14-328-1081
Socket Wrench Handle Bar

143281081
VTR400-10542: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-396-4124
Spanner Wrench

143964124
6274-51015: RNCC: 3 | RNVC: 2
6274-2502420: RNCC: 5 | RNVC: 2

27 Nov 1984

5120-14-558-7484
Socket Wrench Socket

145587484
K.33HB: RNCC: 3 | RNVC: 2
659913: RNCC: 5 | RNVC: 2

30 Oct 2008

5120-14-428-5552
De Pose Mandrin

144285552
SF0-214A: RNCC: 3 | RNVC: 2

8 Dec 1988

5120-14-527-7154
Socket Head Screw Key

145277154
888-490-400-1: RNCC: 3 | RNVC: 2

14 Nov 2001

5120-14-340-8211
Socket Wrench Socket

143408211
R.12: RNCC: 3 | RNVC: 2
R.12: RNCC: 5 | RNVC: 2
3148510506203: RNCC: 5 | RNVC: 2
R12: RNCC: 5 | RNVC: 2
0110985G00: RNCC: 5 | RNVC: 2
91369639: RNCC: 5 | RNVC: 2
250-7301: RNCC: 5 | RNVC: 2
0050620: RNCC: 5 | RNVC: 9
FACOMR.12: RNCC: 5 | RNVC: 9

14 Feb 1977

5120-14-238-5791
Open End Wrench

142385791
NO PRIMARY REF14-238-5791: RNCC: 3 | RNVC: 2
48-4: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-406-5538
Socket Wrench Adapter

144065538
853-100-183-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-321-8402
Socket Head Screw Key

143218402
8810476002: RNCC: 3 | RNVC: 2
85-648-1580: RNCC: 6 | RNVC: 9

1 Jan 1975

5120-14-546-1998
Spring Inserter And Remover

145461998
480080S130-00A: RNCC: 3 | RNVC: 2

15 Jun 2005

5120-14-391-4244
Craftsman's Tweezers

143914244
146.1Y: RNCC: 3 | RNVC: 2
146-1Y: RNCC: 5 | RNVC: 2
3148511376409: RNCC: 5 | RNVC: 2
91627099: RNCC: 5 | RNVC: 2
0137640: RNCC: 5 | RNVC: 9

1 Mar 1984

5120-14-560-4196
Open End Wrench

145604196
MW1283F00: RNCC: 3 | RNVC: 2
14100096211: RNCC: 5 | RNVC: 2

17 Apr 2009

5120-14-564-1725
Six Point Tip Screwdriver

145641725
ASX10X75: RNCC: 3 | RNVC: 2
0772801: RNCC: 5 | RNVC: 2
3148517728011: RNCC: 5 | RNVC: 2

13 Apr 2010

5120-14-378-1729
Spanner Wrench

143781729
D47935: RNCC: 3 | RNVC: 2
85-691-9687: RNCC: 6 | RNVC: 9

20 Jul 1982

5120-14-387-8711
Broche De Centrage

143878711
OU50387: RNCC: 3 | RNVC: 2
0U50387: RNCC: 5 | RNVC: 2

12 Oct 1983

5120-14-218-9449

5120-14-380-8409
Remp Amorti Potence

143808409
F21985: RNCC: 3 | RNVC: 2

14 Dec 1982

5120-14-383-6546
Cone De Montage

143836546
15618J1: RNCC: 3 | RNVC: 2

11 Apr 1983

5120-14-570-2600
Seal Inserter

145702600
UFA31557: RNCC: 3 | RNVC: 2

5 Dec 2011

5120-14-401-5671
Obus De Centrage

144015671
703A93-0216-20: RNCC: 3 | RNVC: 2

13 Jun 1985

5120-14-399-8482
Spanner Wrench

143998482
2-17304: RNCC: 3 | RNVC: 2

28 Mar 1985

5120-14-416-7663
Mandrin Presse

144167663
540688: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-391-8607
De Montage Outil

143918607
704315-00: RNCC: 3 | RNVC: 2
704-315-00: RNCC: 5 | RNVC: 2

21 Mar 1984

5120-14-222-6179
Socket Wrench Socket

142226179
J.5/16: RNCC: 3 | RNVC: 2
3148510276809: RNCC: 5 | RNVC: 2
00.45.76.17: RNCC: 5 | RNVC: 2
J5-16: RNCC: 5 | RNVC: 2
91729308: RNCC: 5 | RNVC: 2
0027680: RNCC: 5 | RNVC: 9

1 Jan 1966

5120-14-303-6302
Torque Wrench Adapter

143036302
D-27: RNCC: 3 | RNVC: 2
D27: RNCC: 3 | RNVC: 2
3272670258938: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-393-0277
Combination Box And Open End Wrench

143930277
41.16: RNCC: 3 | RNVC: 2
3148511013632: RNCC: 5 | RNVC: 2
41-16: RNCC: 5 | RNVC: 2
0184649K00: RNCC: 5 | RNVC: 2
91564514: RNCC: 5 | RNVC: 2
0101363: RNCC: 5 | RNVC: 9

12 Apr 1984

5120-14-321-1567
Flat Tip Screwdriver

143211567
221-6: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-443-8033
Spanner Wrench

144438033
6-33041-038: RNCC: 3 | RNVC: 2

5 Dec 1990

5120-14-446-8352
Socket Wrench Socket

144468352
K.1'5/8LA: RNCC: 3 | RNVC: 2
3148510306056: RNCC: 5 | RNVC: 2
K1 5-8LA: RNCC: 5 | RNVC: 2
0030605: RNCC: 5 | RNVC: 9

17 Apr 1991

5120-14-215-1334
Cle Pour Ecrou A En

142151334
3130S95-12-001: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-459-1074
Poincon

144591074
17339: RNCC: 3 | RNVC: 2

19 Nov 1992

5120-14-224-9889

5120-14-265-3207
Socket Head Screw Key

142653207
23007047: RNCC: 3 | RNVC: 2
23007047-2: RNCC: 5 | RNVC: 2
31-10796HK1-8: RNCC: 5 | RNVC: 2
HK1-8: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-297-5084
Butee Pince A Serti

142975084
0229-050-000: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-386-1555
Bearing And Bushing Inserter

143861555
6801J32-2237-00: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-368-5058
Positionneur Boulon

143685058
235300-78: RNCC: 3 | RNVC: 2
TF10A32411: RNCC: 5 | RNVC: 2
85-689-7921: RNCC: 6 | RNVC: 9

20 Feb 1981

5120-14-348-4424
Spanner Wrench

143484424
GSM084-008F9: RNCC: 3 | RNVC: 2
GSM084-08F9: RNCC: 5 | RNVC: 2

29 Mar 1978

5120-14-478-2778
Bearing And Bushing Remover

144782778
D05-0031: RNCC: 3 | RNVC: 2

18 Oct 1995

5120-14-287-1251
Screwdriver Bit

142871251
NO PRIMARY REF14-287-1251: RNCC: 3 | RNVC: 2
0023964: RNCC: 5 | RNVC: 2
ENT.314: RNCC: 5 | RNVC: 2
ENT314: RNCC: 5 | RNVC: 2
ET14: RNCC: 5 | RNVC: 2
SE-14: RNCC: 5 | RNVC: 2
SE14: RNCC: 5 | RNVC: 2
91630248: RNCC: 5 | RNVC: 2
3272670207165: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-256-6313
Screwdriver Bit Set And Handle

142566313
NO PRIMARY REF14-256-6313: RNCC: 3 | RNVC: 2
463-3A: RNCC: 5 | RNVC: 9

1 Jan 1969

5120-14-323-2080

5120-14-200-9313

5120-14-291-3459
Broche Manutention

142913459
172793: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-392-0908
Extraction Doigt

143920908
853-200-163-0: RNCC: 3 | RNVC: 2

21 Mar 1984

5120-14-319-4072
Torque Wrench Adapter

143194072
D-9/16: RNCC: 3 | RNVC: 2
3272670244917: RNCC: 5 | RNVC: 2
D9-16: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-222-1441
Flat Tip Screwdriver

142221441
E74-351-1-2X8X200R0NDE: RNCC: 2 | RNVC: 2
203-9: RNCC: 3 | RNVC: 2
T081: RNCC: 3 | RNVC: 2
302-9: RNCC: 5 | RNVC: 2

1 Jan 1966

5120-14-528-6749
Socket Head Screw Key

145286749
82H.7/16: RNCC: 3 | RNVC: 2
SYQ0761: RNCC: 5 | RNVC: 2

5 Feb 2002

5120-14-343-9652
Open End Wrench

143439652
13-1 7-16X1 1-2: RNCC: 3 | RNVC: 2
85-686-0324: RNCC: 6 | RNVC: 9

13 Jul 1977

5120-14-567-1812
Mechanical Puller

145671812
U.232-210: RNCC: 3 | RNVC: 2
3148517712010: RNCC: 5 | RNVC: 2
771201: RNCC: 5 | RNVC: 2

18 Feb 2011

5120-14-454-2952
Emmanchement Outil

144542952
MMG052-22: RNCC: 3 | RNVC: 2
MMG052-22: RNCC: 5 | RNVC: 2

26 Mar 1992

5120-14-239-9252
Bearing And Bushing Inserter And Remover

142399252
3210-95-33-130E: RNCC: 3 | RNVC: 2
3210-95-33-130: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-539-9833
Socket Wrench Socket

145399833
OCE91-113J-1: RNCC: 3 | RNVC: 2

25 Feb 2004

5120-14-457-9462
Cable Tie Installation Tool

144579462
853-100-285-0: RNCC: 3 | RNVC: 2

2 Oct 1992

5120-14-458-6725
Cross Tip Screwdriver

144586725
NO PRIMARY REF14-458-6725: RNCC: 3 | RNVC: 2
3148510039176: RNCC: 5 | RNVC: 2
ACD.3X150: RNCC: 5 | RNVC: 2
162-7640: RNCC: 5 | RNVC: 2
H24172: RNCC: 5 | RNVC: 2
0003917: RNCC: 5 | RNVC: 9
ACD.3X150: RNCC: 5 | RNVC: 9
FACOMACD.3X150: RNCC: 5 | RNVC: 9

29 Oct 1992

5120-14-399-5115
Guide Tournevis

143995115
15152106: RNCC: 3 | RNVC: 2

6 Mar 1985

5120-14-550-2458
Socket Wrench Screwdriver Attachment

145502458
457-14540-000: RNCC: 3 | RNVC: 2

13 Jun 2006

5120-14-513-1253
Screwdriver Bit

145131253
FD6515-C1X5-5: RNCC: 3 | RNVC: 2
FD6515C1X5-5: RNCC: 5 | RNVC: 2

5 Mar 1999

5120-14-201-3090
Carpenters' Pincers

142013090
E73-1010RDINAIRE19: RNCC: 2 | RNVC: 1

1 Jan 1962

5120-14-273-7517
Pliers

142737517
E77-003-19: RNCC: 2 | RNVC: 2

1 Jan 1971

5120-14-284-1925

5120-14-200-4417
Socket Wrench Socket

142004417
S.20: RNCC: 3 | RNVC: 2
S-20: RNCC: 3 | RNVC: 2
S20: RNCC: 3 | RNVC: 2
3148510536200: RNCC: 5 | RNVC: 2
S20: RNCC: 5 | RNVC: 2
3272670225299: RNCC: 5 | RNVC: 2
0712 133 120: RNCC: 5 | RNVC: 2
0053620: RNCC: 5 | RNVC: 9

1 Jan 1962

5120-14-212-9169
Cle Speciale A Oeil

142129169
9970-115-036: RNCC: 3 | RNVC: 2
9970-115-036-01: RNCC: 3 | RNVC: 2

1 Jan 1964

5120-14-569-0309
Mechanical Puller

145690309
F27344000-1: RNCC: 3 | RNVC: 2
F27344000: RNCC: 3 | RNVC: 9
F27344000: RNCC: 5 | RNVC: 9

1 Aug 2011

5120-14-409-7103
Reglage Calibre

144097103
854-600-062-0: RNCC: 3 | RNVC: 2

28 May 1986

5120-14-559-2267
Electrical Contact Inserter

145592267
SE-035 00 00 001: RNCC: 3 | RNVC: 2

15 Dec 2008

5120-14-315-4288
Spanner Wrench

143154288
Y075-012-000: RNCC: 3 | RNVC: 2
Y075-012: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-440-5452
Cle

144405452
51979: RNCC: 3 | RNVC: 2
85-694-1113: RNCC: 6 | RNVC: 9

17 Jul 1990

5120-14-263-1181
Pince A Segments

142631181
7-010205-7: RNCC: 3 | RNVC: 2
0UT2069A: RNCC: 5 | RNVC: 9
7-010205-7: RNCC: 5 | RNVC: 9

1 Jan 1970

5120-14-406-6185
Joints Emmanche

144066185
853-200-783-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-362-6806
Outil A Preformer

143626806
9970-121-227: RNCC: 3 | RNVC: 2

19 Mar 1980

5120-14-222-8713
Cle A Rotule Specia

142228713
9970-111-078-03: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-404-1093
Open End Wrench

144041093
10-38X42-P: RNCC: 3 | RNVC: 2
10-38X42P: RNCC: 3 | RNVC: 2
3272670242098: RNCC: 5 | RNVC: 2
10-38X42CP: RNCC: 5 | RNVC: 9

11 Sep 1985

5120-14-490-9605
Cle

144909605
4380 892 381 718: RNCC: 3 | RNVC: 2
F300 0T 000 7676: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-321-8091

5120-14-275-1686
Mandrin Rectangulai

142751686
3CGF84: RNCC: 3 | RNVC: 2
3CGF84: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-396-6996

5120-14-283-3897
Outil A Poinconner

142833897
9970-111-138: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-490-6861
Drill

144906861
240 D 01034 000: RNCC: 3 | RNVC: 2
F300 0T 000 0965: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-552-7653
Screwdriver Bit

145527653
AMZ.D1-2: RNCC: 3 | RNVC: 2
AMZ.D1-2: RNCC: 5 | RNVC: 2
3148510087238: RNCC: 5 | RNVC: 2

30 Jan 2007

5120-14-321-5575
A Sertir Pince

143215575
8476: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-490-6905
Bar

144906905
241 B 00154 025: RNCC: 3 | RNVC: 2
F300 0T 000 1021: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-384-1982
Faux Mors

143841982
26-281-4: RNCC: 3 | RNVC: 2

4 May 1983

5120-14-232-3095
Spanner Wrench

142323095
E22410-340: RNCC: 2 | RNVC: 2

1 Jan 1967

5120-14-337-3433
Spanner Wrench

143373433
BR4X502: RNCC: 3 | RNVC: 2
4X502: RNCC: 5 | RNVC: 2
TL3079: RNCC: 5 | RNVC: 2
85-100-4919: RNCC: 6 | RNVC: 9

7 Oct 1976

5120-14-444-3490
Socket Wrench Socket

144443490
GS86-05: RNCC: 3 | RNVC: 2

9 Jan 1991

5120-14-329-6326
Socket Wrench Socket

143296326
M31-048: RNCC: 3 | RNVC: 2
M31-048: RNCC: 5 | RNVC: 9

2 Jul 1975

5120-14-324-4718
Face Spanner Wrench Socket

143244718
330A93-3312-20: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-394-4144
Torque Wrench Multiplier

143944144
NO PRIMARY REF14-394-4144: RNCC: 3 | RNVC: 2
ML525SCSP: RNCC: 5 | RNVC: 9
ML525SCSP: RNCC: 5 | RNVC: 9

28 Aug 1984

5120-14-256-0389
Support Pour Extrac

142560389
U.40: RNCC: 3 | RNVC: 2
3148510688008: RNCC: 5 | RNVC: 2
U40: RNCC: 5 | RNVC: 2
CAE00935: RNCC: 5 | RNVC: 2
236-7636: RNCC: 5 | RNVC: 2
0068800: RNCC: 5 | RNVC: 9
FACOMU.40: RNCC: 5 | RNVC: 9

1 Jan 1969

5120-14-319-4517
Bearing And Bushing Inserter And Remover

143194517
3130S95-47-001: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-440-1466
Adjustable Wrench

144401466
3511-310-88941: RNCC: 3 | RNVC: 2
3511-310-88941: RNCC: 5 | RNVC: 9

11 Jul 1990

5120-14-384-7347
Electrical Card Extractor

143847347
NO PRIMARY REF14-384-7347: RNCC: 3 | RNVC: 2
16931991: RNCC: 5 | RNVC: 9

2 Jun 1983

5120-14-331-5601
Flat Tip Screwdriver

143315601
AY.6,5X150: RNCC: 3 | RNVC: 2
3148510133409: RNCC: 5 | RNVC: 2
AY6-5X150: RNCC: 5 | RNVC: 2
91618389: RNCC: 5 | RNVC: 2
162-7791: RNCC: 5 | RNVC: 2
0013340: RNCC: 5 | RNVC: 9
AY6,5-150: RNCC: 5 | RNVC: 9
FACOMAY.6,5X150: RNCC: 5 | RNVC: 9

2 Jul 1975

5120-14-249-6736

5120-14-266-5364

5120-14-438-6838
Socket Wrench Extension

144386838
321A96-0036-00: RNCC: 3 | RNVC: 2

28 Mar 1990

5120-14-365-6509
Screwdriver Bit

143656509
4-823103: RNCC: 3 | RNVC: 2
546-22: RNCC: 5 | RNVC: 2
I493: RNCC: 5 | RNVC: 2

8 Oct 1980

5120-14-352-3169
Guide De Montage

143523169
MGF170-21: RNCC: 3 | RNVC: 2
MGF170-21: RNCC: 5 | RNVC: 2

16 Oct 1978

5120-14-214-3136

5120-14-287-0394
Cle A Virer

142870394
21141B: RNCC: 3 | RNVC: 2
21141: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-514-8473
Screw Thread Insert Inserter

145148473
02240040: RNCC: 3 | RNVC: 2
022-4-0040: RNCC: 5 | RNVC: 2

22 Jun 1999

5120-14-386-1538
Brake Shoe Adjusting Tool

143861538
6801J32-1001-00: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-442-2463
Spanner Wrench

144422463
APEAC909-42216: RNCC: 3 | RNVC: 2
85-693-8540: RNCC: 6 | RNVC: 9

3 Oct 1990

5120-14-384-4529
Arrache Volant

143844529
0288915: RNCC: 3 | RNVC: 2

4 May 1983

5120-14-447-2271
Cle Rearmement

144472271
Z7112: RNCC: 3 | RNVC: 2
RAR1937: RNCC: 5 | RNVC: 2
SYB4020: RNCC: 5 | RNVC: 2
7112: RNCC: 5 | RNVC: 2

13 May 1991

5120-14-289-4425
Plaque Dappui

142894425
C46269: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-571-3072
Mechanical Puller Attachment

145713072
U.32T2GA25: RNCC: 3 | RNVC: 2
3148516390660: RNCC: 5 | RNVC: 2
639066: RNCC: 5 | RNVC: 2

13 Mar 2012

5120-14-490-8811
Alene

144908811
4066 214 120 400: RNCC: 3 | RNVC: 2
F300 0T 000 5083: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-274-5182
Matrice Outil A Ser

142745182
48827: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-399-5147
Terminal Crimping Tool Contact Positioner

143995147
M22520MSGAUGE16: RNCC: 3 | RNVC: 2

6 Mar 1985

5120-14-561-4208
Flat Tip Screwdriver

145614208
AWH8EX175: RNCC: 3 | RNVC: 2
AWH.8EX175: RNCC: 5 | RNVC: 2

16 Jul 2009

5120-14-386-1658
Outil Equilibrage

143861658
8701J33-1019-00: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-528-9182
Tap And Reamer Wrench

145289182
EL852.01: RNCC: 3 | RNVC: 2
8110011-N1: RNCC: 3 | RNVC: 2
100 NUM.0: RNCC: 3 | RNVC: 2
SYQ0850: RNCC: 5 | RNVC: 2
100: RNCC: 5 | RNVC: 2

22 Feb 2002

5120-14-343-9852
Boite Emmanche Join

143439852
9970-121-240: RNCC: 3 | RNVC: 2
85-689-7112: RNCC: 6 | RNVC: 9

13 Jul 1977

5120-14-202-0412
Blacksmith's Flatter

142020412
3837-37EMMANCHE: RNCC: 3 | RNVC: 2
M0B16-35EC: RNCC: 3 | RNVC: 2
610-35EMMANCHE: RNCC: 5 | RNVC: 9
12-35EMMANCHE: RNCC: 5 | RNVC: 9

1 Jan 1963

5120-14-503-5934
Retaining Ring Pliers

145035934
197E.9: RNCC: 3 | RNVC: 2
197E-9: RNCC: 5 | RNVC: 2
197E9: RNCC: 5 | RNVC: 2
3148511456859: RNCC: 5 | RNVC: 2
91795036: RNCC: 5 | RNVC: 2
0145685: RNCC: 5 | RNVC: 9

21 Jan 1998

5120-14-515-8096
Flat Tip Screwdriver

145158096
N274-MP-2: RNCC: 3 | RNVC: 2
3272670355620: RNCC: 5 | RNVC: 2
N274MP2: RNCC: 5 | RNVC: 2

6 Aug 1999

5120-14-220-9921
Socket Head Screw Key

142209921
NO PRIMARY REF14-220-9921: RNCC: 3 | RNVC: 2
KLEMAL1-5: RNCC: 5 | RNVC: 9
21627: RNCC: 5 | RNVC: 9
21627: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-476-3265
Socket Wrench Socket

144763265
S.15LA: RNCC: 3 | RNVC: 2
3148510553351: RNCC: 5 | RNVC: 2
235-4258: RNCC: 5 | RNVC: 2
FACOMS.15LA: RNCC: 5 | RNVC: 9
0055335: RNCC: 5 | RNVC: 9

7 Jun 1995

5120-14-273-7711
Flat Tip Screwdriver

142737711
121-1: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-285-6235

5120-14-201-9948
Inserted Hammer Face

142019948
EB.32: RNCC: 3 | RNVC: 2
602-3: RNCC: 3 | RNVC: 2
130034: RNCC: 5 | RNVC: 2
3148510222202: RNCC: 5 | RNVC: 2
EB32: RNCC: 5 | RNVC: 2
0022220: RNCC: 5 | RNVC: 9

1 Jan 1962

5120-14-299-7354
Screwdriver Bit Holder

142997354
812 3-8: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-557-1864
Socket Wrench Socket

145571864
RHC-9: RNCC: 3 | RNVC: 2

23 May 2008

5120-14-530-7475
Flat Tip Screwdriver

145307475
212568-0: RNCC: 3 | RNVC: 2
212568-0: RNCC: 5 | RNVC: 2

3 Jul 2002

5120-14-552-1417
Socket Wrench Screwdriver Attachment Set

145521417
D.108J15: RNCC: 3 | RNVC: 2

28 Nov 2006

5120-14-468-9830
Seal Inserter And Remover

144689830
40N108335-1: RNCC: 3 | RNVC: 2

30 Mar 1994

5120-14-496-7522
Cle Plaque T

144967522
10436680: RNCC: 3 | RNVC: 2
F300 0T 022 0254: RNCC: 6 | RNVC: 9

15 Oct 1997

5120-14-411-2083
Demi-Palier

144112083
4A1121-30-02W26H: RNCC: 3 | RNVC: 2
121-411-08-W26H: RNCC: 5 | RNVC: 2
121-411-08W26H: RNCC: 5 | RNVC: 2
4A-1121-30-02-W26H: RNCC: 5 | RNVC: 2
85-692-5703: RNCC: 6 | RNVC: 9

6 Aug 1986

5120-14-215-9635
Cle A Panier Hexago

142159635
773-411-003F5-64SURPLATS: RNCC: 3 | RNVC: 2
773-411-003F5-64SURPLATS: RNCC: 5 | RNVC: 9
773-411-003FF5-64SURPLATS: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-455-0111
Sheet Metalworking Stake

144550111
853-930-096-0: RNCC: 3 | RNVC: 2

1 May 1992

5120-14-200-9327
Socket Wrench Socket

142009327
S.11/16: RNCC: 3 | RNVC: 2
3148510544403: RNCC: 5 | RNVC: 2
S11-16: RNCC: 5 | RNVC: 2
0054440: RNCC: 5 | RNVC: 9

1 Jan 1962

5120-14-321-1532
Open End Wrench

143211532
NO PRIMARY REF14-321-1532: RNCC: 3 | RNVC: 2
13 7-8X1 1-8: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-289-8787
Hand Terminal Crimping Tool

142898787
169060-08: RNCC: 3 | RNVC: 2
169060-3: RNCC: 5 | RNVC: 2
169060-8: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-524-4153
Socket Head Screw Key

145244153
83H.6: RNCC: 3 | RNVC: 2
3148511240618: RNCC: 5 | RNVC: 2
83H-6 HEX-PLUS: RNCC: 5 | RNVC: 2
CAE00893: RNCC: 5 | RNVC: 2
0715 31 22: RNCC: 5 | RNVC: 2
83H.6: RNCC: 5 | RNVC: 9

14 Mar 2001

5120-14-427-6933
Spanner Wrench

144276933
J05527-00S200P003: RNCC: 3 | RNVC: 2

3 Nov 1988

5120-14-349-1703
Face Spanner Wrench Socket

143491703
703A93-0000-01: RNCC: 3 | RNVC: 2

19 Apr 1978

5120-14-501-9791
Electric Melting Pot

145019791
420005: RNCC: 3 | RNVC: 2
420005: RNCC: 5 | RNVC: 2

19 Nov 1997

5120-14-572-4058
Spanner Wrench

145724058
O111521: RNCC: 3 | RNVC: 2

3 Jul 2012

5120-14-251-1137
Extracteur

142511137
202437: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-201-5533
Poincon A Chev Lame

142015533
NO PRIMARY REF14-201-5533: RNCC: 3 | RNVC: 2
108-6: RNCC: 5 | RNVC: 9

1 Jan 1962

5120-14-419-3014
Depose Jonc Pince

144193014
851-200-144-0: RNCC: 3 | RNVC: 2

16 Oct 1987

5120-14-459-9634
Spanner Wrench

144599634
D83/10/CLE: RNCC: 3 | RNVC: 2

6 Jan 1993

5120-14-468-2406
Socket Wrench Handle

144682406
853-100-295-0: RNCC: 3 | RNVC: 2

16 Feb 1994

5120-14-212-3803

5120-14-567-1549
Retaining Ring Pliers

145671549
177A.32: RNCC: 3 | RNVC: 2
3148518232340: RNCC: 5 | RNVC: 2
823234: RNCC: 5 | RNVC: 2

16 Feb 2011

5120-14-463-1428
Tige De Guidage

144631428
50401: RNCC: 3 | RNVC: 2
85-695-0312: RNCC: 6 | RNVC: 9

26 May 1993

5120-14-361-4007
Outil Reglage Cavit

143614007
494633: RNCC: 3 | RNVC: 2
85-689-4804: RNCC: 6 | RNVC: 9

24 Jan 1980

5120-14-259-5371
Jeu De Demonte Roue

142595371
NO PRIMARY REF14-259-5371: RNCC: 3 | RNVC: 2
3XFIACRE: RNCC: 5 | RNVC: 9

1 Jan 1969

5120-14-313-4549
Open End Wrench

143134549
ECHC251-3-4REP8: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-215-1339
Ensemble Dextractio

142151339
3130S95-12-009-1: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-387-5016
Outilla Regl Moteur

143875016
38-3-96-10: RNCC: 3 | RNVC: 2

15 Sep 1983

5120-14-392-0872
Torque Wrench Adapter

143920872
853-100-101-0: RNCC: 3 | RNVC: 2

21 Mar 1984

5120-14-262-4794
Outil Demmanchement

142624794
3210-97-31-025: RNCC: 3 | RNVC: 2
08-390-1: RNCC: 5 | RNVC: 2
08-293: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-325-4773

5120-14-232-1751

5120-14-255-1731

5120-14-444-8295
Cle De Serrage

144448295
0478-203112: RNCC: 3 | RNVC: 2

23 Jan 1991

5120-14-406-9492
Faux Grand Tirant

144069492
853-202-205-0: RNCC: 3 | RNVC: 2

22 Jan 1986

5120-14-374-0858
Spanner Wrench

143740858
UHJ314-21: RNCC: 3 | RNVC: 2

8 Dec 1981

5120-14-304-3154
Cone De Montage

143043154
S16-0609-0221: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-236-4585
Spanner Wrench

142364585
951618: RNCC: 3 | RNVC: 2
NR940-04N7: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-361-6614

5120-14-336-7463

5120-14-419-7962
Hand Terminal Crimping Tool

144197962
90260-1: RNCC: 3 | RNVC: 2

5 Nov 1987

5120-14-395-4068
A Macho Serre-Cable

5120-14-370-8876
Bearing Staking Installation Tool

143708876
6802R75-3206-00: RNCC: 3 | RNVC: 2
6802366A75-3206-00: RNCC: 5 | RNVC: 2

21 Feb 1996

5120-14-443-9903
Open End Wrench

144439903
GS125-15: RNCC: 3 | RNVC: 2

18 Dec 1990

5120-14-437-3576
Spanner Wrench

144373576
J00650-01S140P017: RNCC: 3 | RNVC: 2

30 Jan 1990

5120-14-319-5801
Socket Head Screw Key

143195801
213-23-265-048-3: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-238-5798

5120-14-488-1373
Open End Wrench

144881373
K7739-3BAX1BA: RNCC: 3 | RNVC: 2
3BAX1BA: RNCC: 5 | RNVC: 2

18 Apr 1997

5120-14-413-4686
Spanner Wrench

144134686
3121006F3/180: RNCC: 3 | RNVC: 2
3121006F3/180: RNCC: 5 | RNVC: 9

17 Dec 1986

5120-14-230-1200
Pliers

142301200
NO PRIMARY REF14-230-1200: RNCC: 3 | RNVC: 2
198-18CPY: RNCC: 5 | RNVC: 2
198.18CPY: RNCC: 5 | RNVC: 2
3148511458204: RNCC: 5 | RNVC: 2
91527980: RNCC: 5 | RNVC: 2
162-8261: RNCC: 5 | RNVC: 2
0145820: RNCC: 5 | RNVC: 9
198-18Y: RNCC: 5 | RNVC: 9
FACOM198.18CPY: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-453-7076
Adjustable Wrench

144537076
F7987 3095-88: RNCC: 3 | RNVC: 9
3095-88: RNCC: 5 | RNVC: 9
CLEF NR1 CP49A: RNCC: 5 | RNVC: 9

5 Mar 1992

5120-14-477-5046
Screwdriver Bit

144775046
ES.615,5: RNCC: 3 | RNVC: 2
3148510248387: RNCC: 5 | RNVC: 2
1111620G00: RNCC: 5 | RNVC: 2
0024838: RNCC: 5 | RNVC: 9

7 Sep 1995

5120-14-286-7309
Wrench Kit

142867309
0512480: RNCC: 3 | RNVC: 2
420E: RNCC: 5 | RNVC: 2
R.420E: RNCC: 5 | RNVC: 2
R420E: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-463-1992
Socket Wrench Attachment Universal Joint

144631992
R.240A: RNCC: 3 | RNVC: 2
R.240A: RNCC: 5 | RNVC: 2
R240A: RNCC: 5 | RNVC: 2
0713 118 301: RNCC: 5 | RNVC: 2
0052905: RNCC: 5 | RNVC: 9
91741293: RNCC: 5 | RNVC: 9

26 May 1993

5120-14-460-4149
Slip Joint Pliers

144604149
410.S: RNCC: 3 | RNVC: 2
410.S: RNCC: 5 | RNVC: 2
3148511753651: RNCC: 5 | RNVC: 2
410S: RNCC: 5 | RNVC: 2
1132809N00: RNCC: 5 | RNVC: 2
91778742: RNCC: 5 | RNVC: 2
CAE00884: RNCC: 5 | RNVC: 2
0175365: RNCC: 5 | RNVC: 9

25 Jan 1993

5120-14-242-9486

5120-14-274-8279

5120-14-208-7280

5120-14-247-1255
Extracteur

142471255
M02021: RNCC: 3 | RNVC: 2
0000330561: RNCC: 5 | RNVC: 2
0000330561: RNCC: 5 | RNVC: 9
330561: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-229-1752
Cle Pour Dzus

142291752
12100328: RNCC: 3 | RNVC: 2
12100328: RNCC: 3 | RNVC: 9

1 Jan 1967

5120-14-322-1340
Entrainement Noix

143221340
121E95-170-20-0: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-431-2689
Support De Mat

144312689
3160S95-68-110: RNCC: 3 | RNVC: 2

12 Apr 1989

5120-14-315-5995
Flat Tip Screwdriver

143155995
ABB.6,5X40: RNCC: 3 | RNVC: 2
00016591: RNCC: 3 | RNVC: 2
NF E74-352: RNCC: 4 | RNVC: 1
NF E74-351: RNCC: 4 | RNVC: 1
ABB.6,5X40: RNCC: 5 | RNVC: 2
ABB6-5X40: RNCC: 5 | RNVC: 2
3148510038001: RNCC: 5 | RNVC: 2
00016591: RNCC: 5 | RNVC: 9
0003800: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-459-3604
Serrage Dispositif

144593604
1SA: RNCC: 3 | RNVC: 2
1-SA: RNCC: 3 | RNVC: 2
131348: RNCC: 5 | RNVC: 2
3272670289277: RNCC: 5 | RNVC: 2

26 Nov 1992

5120-14-331-0797
Electrical Card Extractor

143310797
NO PRIMARY REF14-331-0797: RNCC: 3 | RNVC: 2
4698B: RNCC: 5 | RNVC: 9

2 Jul 1975

5120-14-427-2215
Bearing And Bushing Inserter And Remover

144272215
46MS047-15: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-441-2239
Bearing And Bushing Inserter And Remover

144412239
6802G32-2065-00: RNCC: 3 | RNVC: 2

22 Aug 1990

5120-14-313-4548
Open End Wrench

143134548
ECHC251-1-4REP3: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-272-3733
Open End Wrench

142723733
E74302R26-27BAW: RNCC: 2 | RNVC: 1

1 Jan 1971

5120-14-564-1430
Ring Beanding Tool

145641430
430818: RNCC: 3 | RNVC: 2

12 Apr 2010

5120-14-317-5645
Cross Tip Screwdriver

143175645
01216: RNCC: 3 | RNVC: 2
1550W: RNCC: 5 | RNVC: 2
1550-12: RNCC: 5 | RNVC: 9
85-668-3202: RNCC: 6 | RNVC: 9

1 Jan 1975

5120-14-338-4788
Socket Wrench Socket

143384788
C1-46033: RNCC: 3 | RNVC: 2

6 Nov 1976

5120-14-244-9011
Open End Wrench

142449011
10-32X35: RNCC: 3 | RNVC: 2
13L32X35: RNCC: 5 | RNVC: 2
44S32X35: RNCC: 5 | RNVC: 2
10-32X35CM: RNCC: 5 | RNVC: 2
10NC32X35: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-377-2794
Controle Regle

143772794
TMY20-32-512: RNCC: 3 | RNVC: 2

17 May 1982

5120-14-410-3670
Socket Head Screw Key

144103670
82-1POUCE: RNCC: 3 | RNVC: 2
12112-1: RNCC: 5 | RNVC: 2

18 Jun 1986

5120-14-409-4680
Spanner Wrench

144094680
4843-3P: RNCC: 3 | RNVC: 9

28 May 1986

5120-14-462-1926
Leveling-Support Jack Set

144621926
952-02-01-02: RNCC: 3 | RNVC: 2

14 Apr 1993

5120-14-445-9072
Friction Igniter Flint Tip

144459072
18-1198: RNCC: 3 | RNVC: 2
91700970: RNCC: 5 | RNVC: 2

27 Feb 1991

5120-14-415-7869
Extracteur Pour Pal

144157869
NO PRIMARY REF14-415-7869: RNCC: 3 | RNVC: 2
VTR401REP1020: RNCC: 5 | RNVC: 9
VTR401REP1020: RNCC: 5 | RNVC: 9

18 May 1987

5120-14-453-9986
Socket Wrench Crowfoot Attachment

144539986
853-100-278-0: RNCC: 3 | RNVC: 2

19 Mar 1992

5120-14-353-2420
Spanner Wrench

143532420
65-20-144-12-03: RNCC: 3 | RNVC: 2

8 Dec 1978

5120-14-541-4295
Outil Assem Bille

145414295
61607: RNCC: 3 | RNVC: 2

10 Jun 2004

5120-14-429-1395
Speciale Cle

144291395
536795: RNCC: 3 | RNVC: 2

11 Jan 1989

5120-14-353-9750
Pointeau Dimmobilis

143539750
OXB501-113-000-7: RNCC: 3 | RNVC: 2
0XB501-113-000-7: RNCC: 5 | RNVC: 2

16 Jan 1979

5120-14-575-8795
Spanner Wrench

145758795
000000030149: RNCC: 3 | RNVC: 2

14 May 2013

5120-14-332-6580
Support De Montage

143326580
45355: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-278-5034

5120-14-228-5913

5120-14-290-7586

5120-14-488-3153
Cross Tip Screwdriver

144883153
ATHH.P2: RNCC: 3 | RNVC: 2
0011730: RNCC: 5 | RNVC: 2
3148510117300: RNCC: 5 | RNVC: 2
ATHHP2: RNCC: 5 | RNVC: 2

30 Apr 1997

5120-14-314-8167
Hand Terminal Crimping Tool

143148167
41931: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-382-5696
Electrical Card Extractor

143825696
16928924: RNCC: 3 | RNVC: 2
16928924: RNCC: 5 | RNVC: 9

17 Feb 1983

5120-14-302-9159

5120-14-268-0633

5120-14-389-2182
Socket Head Screw Key

143892182
M34002: RNCC: 3 | RNVC: 2
85-692-3939: RNCC: 6 | RNVC: 9

29 Nov 1983

5120-14-521-6323
Socket Head Screw Key

145216323
SC0135-40-60: RNCC: 3 | RNVC: 2
SC0135-40-60: RNCC: 5 | RNVC: 9

30 Aug 2000

5120-14-297-7694
Spanner Wrench

142977694
6800-2218: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-214-9319
Jauge Verification

142149319
60290-01-04-010C1: RNCC: 3 | RNVC: 2
9970-143-080: RNCC: 5 | RNVC: 2

1 Jan 1965

5120-14-556-6771
Spanner Wrench

145566771
82405073000: RNCC: 3 | RNVC: 2

1 Apr 2008

5120-14-427-4061
Jeu Tor Tournevis

144274061
0500335: RNCC: 3 | RNVC: 2
ACX.J9: RNCC: 5 | RNVC: 2
ACXJ9: RNCC: 5 | RNVC: 2

18 Oct 1988

5120-14-031-9933
Socket Wrench Crowfoot Attachment

140319933
330A93-2042-20: RNCC: 3 | RNVC: 2

5 Jul 1980

5120-14-408-3032
Electrical Contact Inserter

144083032
372-8091-070: RNCC: 3 | RNVC: 2

19 Mar 1986

5120-14-313-2124
Hand Terminal Crimping Tool

143132124
NO PRIMARY REF14-313-2124: RNCC: 3 | RNVC: 2
105100: RNCC: 5 | RNVC: 2
863553: RNCC: 5 | RNVC: 2
PM2C: RNCC: 5 | RNVC: 9
85-686-2549: RNCC: 6 | RNVC: 9

1 Jan 1974

5120-14-326-2738
Combination Box And Open End Wrench

143262738
330A94-2711-20: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-334-1685
Serrage Axe Outil

143341685
TF10A71301: RNCC: 3 | RNVC: 2
85-688-4604: RNCC: 6 | RNVC: 9

23 Apr 1976

5120-14-340-8216
Socket Wrench Socket

143408216
R13-32: RNCC: 3 | RNVC: 2
3148510509402: RNCC: 5 | RNVC: 2

14 Feb 1977

5120-14-372-1602
Pare-Bri Mont Outil

143721602
D.80-01: RNCC: 3 | RNVC: 2
3148510196046: RNCC: 5 | RNVC: 2
D80-01: RNCC: 5 | RNVC: 2
0019604: RNCC: 5 | RNVC: 9

1 Sep 1981

5120-14-423-2216
Bague Blocage Cle D

144232216
0747120: RNCC: 3 | RNVC: 2
SP.1733 D-10: RNCC: 5 | RNVC: 2
SP1733D-10: RNCC: 5 | RNVC: 2

13 Apr 1988

5120-14-245-8138

5120-14-314-9768
Jauge Helice

143149768
101A504457A: RNCC: 3 | RNVC: 2
100A504457A: RNCC: 5 | RNVC: 2
100A504457A: RNCC: 5 | RNVC: 9
101A504457A: RNCC: 5 | RNVC: 9
85-672-1823: RNCC: 6 | RNVC: 9

1 Jan 1974

5120-14-247-9803
Cle De Maintien Pla

142479803
160-71960-23: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-333-8608
Spanner Wrench

143338608
9970-115-568: RNCC: 3 | RNVC: 2

23 Apr 1976

5120-14-387-9805
Socket Wrench Crowfoot Attachment

143879805
853-100-046-0: RNCC: 3 | RNVC: 2

12 Oct 1983

5120-14-316-7534
Spanner Wrench

143167534
9018-1-1-8: RNCC: 3 | RNVC: 2
9018-1-1-8: RNCC: 5 | RNVC: 1
85-595-7812: RNCC: 6 | RNVC: 9

1 Jan 1975

5120-14-332-6572
Extracteur Clapet

143326572
45106: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-222-1512

5120-14-403-6294
Bearing And Bushing Inserter And Remover

144036294
OXB101-244-700R14: RNCC: 3 | RNVC: 2
0XB101-244-700R14: RNCC: 5 | RNVC: 2

21 Aug 1985

5120-14-232-4946
Open End Wrench

142324946
20.26: RNCC: 3 | RNVC: 2
20-26: RNCC: 5 | RNVC: 2
3148510936604: RNCC: 5 | RNVC: 2
91592172: RNCC: 5 | RNVC: 2
0093660: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-362-1761
Faux Mors

143621761
C46346: RNCC: 3 | RNVC: 2

20 Feb 1980

5120-14-573-9282
Socket Wrench Adapter

145739282
3812: RNCC: 3 | RNVC: 2
3812: RNCC: 5 | RNVC: 2
3812: RNCC: 5 | RNVC: 2

21 Nov 2012

5120-14-355-1920
Coup Outil A Sertir

143551920
VDP7539: RNCC: 3 | RNVC: 2

19 Mar 1979

5120-14-334-6864

5120-14-333-7530

5120-14-322-4493
Wrench Kit

143224493
1803: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-432-3848
Outillage Mandrin

144323848
541630: RNCC: 3 | RNVC: 2
00541630: RNCC: 5 | RNVC: 2

7 Jun 1989

5120-14-371-2178

5120-14-215-1900

5120-14-396-9993

5120-14-366-4291
Orient Pince Vissee

143664291
A9101364: RNCC: 3 | RNVC: 2
A910-1364: RNCC: 5 | RNVC: 2

20 Nov 1980

5120-14-398-9418
Spanner Wrench

143989418
102429: RNCC: 3 | RNVC: 2
M334-04-89-29: RNCC: 3 | RNVC: 2
453-65287-000: RNCC: 3 | RNVC: 2

6 Mar 1985

5120-14-451-0453
Plaque Enlevage

144510453
52640920900: RNCC: 3 | RNVC: 2
026409096: RNCC: 5 | RNVC: 2
02640909600: RNCC: 5 | RNVC: 2
595398P0: RNCC: 5 | RNVC: 2
771640-01: RNCC: 5 | RNVC: 2

28 Oct 1991

5120-14-383-6907
Mechanical Puller Attachment

143836907
NO PRIMARY REF14-383-6907: RNCC: 3 | RNVC: 2
368-295898: RNCC: 5 | RNVC: 9
368295898: RNCC: 5 | RNVC: 9
68-0295: RNCC: 5 | RNVC: 9

11 Apr 1983

5120-14-416-2240
Spanner Wrench

144162240
110-722-01W26H: RNCC: 3 | RNVC: 2
110-722-01-W26H: RNCC: 5 | RNVC: 2
85-692-5696: RNCC: 6 | RNVC: 9

3 Jun 1987

5120-14-411-2089
Spanner Wrench

144112089
121-411-06W26H: RNCC: 3 | RNVC: 2
121-411-06-W26H: RNCC: 5 | RNVC: 2
85-692-5701: RNCC: 6 | RNVC: 9

6 Aug 1986

5120-14-459-3271
Spanner Wrench

144593271
OS22704: RNCC: 3 | RNVC: 2
OS22704: RNCC: 5 | RNVC: 9

25 Nov 1992

5120-14-479-3380
Socket Head Screw Key

144793380
0787131Y00: RNCC: 3 | RNVC: 2

10 Jan 1996

5120-14-537-5225
Torque Wrench Adapter

145375225
9715900000: RNCC: 3 | RNVC: 2

3 Nov 2003

5120-14-229-8551
Spanner Wrench

142298551
885579A: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-271-6080
Open End Wrench

142716080
4062-23: RNCC: 3 | RNVC: 9
E74301C23WWF: RNCC: 5 | RNVC: 1
1133-23: RNCC: 5 | RNVC: 9

1 Jan 1970

5120-14-435-0493
Screwdriver Bit

144350493
ES.104: RNCC: 3 | RNVC: 2
ES-104: RNCC: 5 | RNVC: 2
ES.104: RNCC: 5 | RNVC: 2
3148510245935: RNCC: 5 | RNVC: 2
1029272E00: RNCC: 5 | RNVC: 2
0024593: RNCC: 5 | RNVC: 9

17 Oct 1989

5120-14-220-0284
Open End Wrench

142200284
33-20X21: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-522-0221
Socket Wrench Socket

145220221
OCE83-30A: RNCC: 3 | RNVC: 2
0CE83-30A: RNCC: 5 | RNVC: 2

29 Sep 2000

5120-14-371-4247
Spanner Wrench

143714247
6254-58099: RNCC: 3 | RNVC: 2

5 Aug 1981

5120-14-411-2097
Cle Speciale

144112097
110-6000-02W26H: RNCC: 3 | RNVC: 2
110-6000-02-W26H: RNCC: 5 | RNVC: 2
85-691-9989: RNCC: 6 | RNVC: 9

6 Aug 1986

5120-14-396-6820
Retaining Ring Pliers

143966820
851-200-007-0: RNCC: 3 | RNVC: 2

27 Nov 1984

5120-14-283-2491

5120-14-405-1554
Fauss Chemise Avec

144051554
775BE/LOG: RNCC: 3 | RNVC: 2

27 Nov 1985

5120-14-383-0879
Insta Ext Outillage

143830879
9970-113-026: RNCC: 3 | RNVC: 2

17 Mar 1983

Load More Results