What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.

A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Blacksmith's Punch?

A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Mechanical Finger?

A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.

A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Screwdriver And Wrench Assembly?

A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Stakeholder Bench Plate?

A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.

What is a Drill Drift?

A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.

A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Digging Bar?

A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

What is a Valve Spring Lifter?

A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.

What is a Fuse Puller?

A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.

Hand Tools, Nonedged, Nonpowered - France (FR)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by France (FR) - NCB is 14

Page 102 of 110

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by France

51	20	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - France (FR)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 16 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Pipe Vise? 19 Items: A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.
What is a Hand Vise? 25 Items: A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.
What is a Hand Hydraulic Jack? 133 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 153 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 903 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 17 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
Swage,Bottom,Blacksmith's 10 Items
What is a Hand Tube Flaring Tool? 23 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Blacksmith's Punch? 12 Items: A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.
What is a Drain Plug Wrench? 45 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 57 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 16 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 3829 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
Flatter,Blacksmith's 18 Items
Swage,Top,Blacksmith's 12 Items
What is a Pipe Wrench? 110 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 149 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 53 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
Screwdriver,Offset 54 Items
What is a Screwdriver Bit? 707 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Mechanical Finger? 25 Items: A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.
What is a Socket Wrench Socket? 1803 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 1412 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 1641 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 52 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 565 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
Jack,Push-Pull,Screw 30 Items
What is a Hand Tube Bender? 54 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 1106 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 55 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pinch Bar? 19 Items: A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.
What is a Pry Bar? 17 Items: A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.
What is a Wrecking Bar? 15 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 273 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 413 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 32 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 295 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
Face,Hammer,Inserted 25 Items
What is a Hole Sheet Metal Holder? 37 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Screwdriver And Wrench Assembly? 11 Items: A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.
What is a Hand Rivet Set? 121 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Stakeholder Bench Plate? 22 Items: A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.
What is a Drill Drift? 32 Items: A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.
What is a Tack Claw? 15 Items: A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.
Mattock 28 Items
What is a Socket Wrench Handle Bar? 108 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Stake,Sheet Metalworking 50 Items
Riveter,Blind,Hand 76 Items
What is a Hand Shovel? 43 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 98 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 30 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
What is a Digging Bar? 20 Items: A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.
Block,Dolly,Sheet Metalworking 56 Items
What is a Piston Ring Compressor? 34 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Valve Spring Lifter? 29 Items: A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.
What is a Fuse Puller? 20 Items: A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.
What is a Hand Lead Seal Press? 18 Items: A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.
What is a Hand Beading Tool? 91 Items: A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.
What is a Hand Hammer? 502 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
Head,Hand Hammer 81 Items
What is a Lamp Extractor? 76 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Tube Packing Ring Installing Tool? 29 Items: A Tube Packing Ring Installing Tool (INSTALLING TOOL,TUBE PACKING RING) is an item designed to insert packing rings on tubes within tube sheets on condensers and similar heat exchangers. In operation, the packing rings are assembled on the loading pin mandrel and are then transferred from the mandrel on to the tube by means of a tubular sleeve which slides on the mandrel.
What is a Carpenters' Pincers? 18 Items: A Carpenters' Pincers (PINCERS,CARPENTERS') is a plierlike hand tool having two opposing jaws which may have hammerlike backs. One handle has a nail or tack pulling claw, the other is shaped to form a screwdriver. The tool may contain a wire cutter. See also NIPPERS, END CUTTING and PINCERS, FARRIERS'.
What is a Trowel? 33 Items: A Trowel is a tool used for bricklaying, concrete work, plastering, linoleum laying, and masonry work. Excludes CORNER TOOL, CONCRETE.
What is a Hand Abrasive Wheel Dresser? 12 Items: A Hand Abrasive Wheel Dresser (DRESSER,ABRASIVE WHEEL,HAND) is a tool designed to remove glaze from, dress, shape, sharpen, and true solid abrasive wheels. Excludes NIB, DIAMOND, WHEEL DRESSING.
What is a Lamp Cap Extractor? 32 Items: A Lamp Cap Extractor (EXTRACTOR,LAMP CAP) is a tool specifically designed to facilitate the removal of lamp caps from switchboards, panels or indicator lamps.
What is a Rivet Bucking Bar? 51 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 86 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 277 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Woven Cable Grip? 23 Items: A Woven Cable Grip (GRIP,CABLE,WOVEN) is a braided wire device designed to clutch a bare or insulated conductor, cable or wire rope, for holding taut or drawing through conduit.
What is a Screw Thread Insert Extractor? 19 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is an Electron Tube Extractor? 18 Items: An Electron Tube Extractor (EXTRACTOR,ELECTRON TUBE) is a hand tool designed to facilitate the removal of electron tubes from electronic equipment and to avoid burning the fingers. It may be used for installing tubes.
What is a Cross Tip Screwdriver? 362 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 21 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 11 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 37 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Tool Handle Wedge? 10 Items: A Tool Handle Wedge (WEDGE,TOOL HANDLE) is excludes WEDGE, WOOD.
What is a Marlinespike? 16 Items: A Marlinespike is a metal hand tool made in the shape of a tapered pin. One end is pointed and the opposite end may be headed. The body may contain an eye for a lanyard sling, or be grooved lengthwise. Excludes CABLE PICK and FID.
What is an Aligning Punch? 272 Items: An Aligning Punch (PUNCH,ALIGNING) is a round, square, hexagonal or octagonal bodied hand tool, having a round tapered section 6-1/2 inches (165.1 mm) or more in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, DRIFT and DRIFTPIN.
What is a Drift Punch? 25 Items: A Drift Punch (PUNCH,DRIFT) is a round, square, hexagonal, or octagonal bodied hand tool, having a round tapered section 4 to 6 inches (101.6 mm to 152.4 mm) inclusive in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, ALIGNING; and DRIFTPIN.
What is a Putty Knife? 36 Items: A Putty Knife (KNIFE,PUTTY) is a hand tool with a nonedged blade fixed to a handle for laying on and smoothing putty and the like.
What is a Socket Wrench Adapter-Extension? 40 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 30 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 184 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Socket Wrench Ratchet Attachment? 47 Items: A Socket Wrench Ratchet Attachment (RATCHET ATTACHMENT,SOCKET WRENCH) is a connection for socket wrenches and handles. Consists of a ratcheting mechanism with an internal drive on one end and an external drive on the opposite end of the same size. The item is designed to permit continuous rotation of the socket in one direction without removing the socket or handle and without a complete rotation of the handle.
What is a Wrench Extension Handle? 81 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Socket Wrench Crowfoot Attachment? 155 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 33 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 43 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 48 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 2394 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 372 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 300 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 661 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 32 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand-Operated Grommet And Eyelet Press? 12 Items: A Hand-Operated Grommet And Eyelet Press (PRESS,GROMMET AND EYELET,HAND-OPERATED) is a device which punches or pierces holes and in addition fastens or sets eyelets and grommets in cloth, paper and similar material. May be used for fastening or setting rivets, lacing hooks and snaps in cloth, paper and similar material. It is hand operated by lever or screw action. See also PUNCH, EYELET, PLIER TYPE and PRESS, GROMMET AND EYELET, FOOT OPERATED.
What is a Claw Bar? 19 Items: A Claw Bar (BAR,CLAW) is before using, refer to Reference Drawing Group AG.
What is a Shock Type Wheel Stud Nut Wrench? 11 Items: A Shock Type Wheel Stud Nut Wrench (WRENCH,WHEEL STUD NUT,SHOCK TYPE) is a manually operated item designed to remove wheel stud nuts. In operation the inner nut is turned by a socket attached to a shaft on which is a loose swinging weighted handle. The weighted handle may be swung quickly to provide an impact force against the socket to loosen the seized or jammed nuts. The outer nut is held stationary by a separate hexagonal holding wrench.
What is a Drift Pin Set? 30 Items: A Drift Pin Set is a group of DRIFTPIN having different characteristics.
What is a Tire Iron? 25 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 115 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Blacksmith's Vise? 14 Items: A Blacksmith's Vise (VISE,BLACKSMITH'S) is a clamping device consisting of a mounting plate, one stationary and one manual screw actuated jaw and a supporting member extending downward from the stationary jaw to the floor. Designed to be mounted on a bench, table or the like. May include pipe holding jaws.
What is a Machinist's Vise? 64 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Clamp Base Bench Vise? 10 Items: A Clamp Base Bench Vise (VISE,BENCH,CLAMP BASE) is a clamping device consisting of a base, one stationary and one manual screw actuated jaw, and one or more guide bars or rods. Designed with an integral clamp for attaching to a bench, table, or the like. Does not include pipe holding jaws.
What is a Fixed Open End Wrench Set? 86 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Nail Set? 11 Items: A Nail Set is a round knurled, square, hexagonal or octagonal bodied hand tool having a round tapered section terminating in a cupped point. It is designed to set brad head nails below the surface by striking it a hammerlike blow. See also PUNCH, DRIVE PIN.
What is a Socket Wrench Set? 202 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is an Open End Box Wrench Set? 10 Items: An Open End Box Wrench Set (WRENCH SET,OPEN END BOX) is a group of WRENCH, OPEN END BOX having different characteristics.
What is a Combination Box And Open End Wrench Set? 72 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Box Wrench Set? 36 Items: A Box Wrench Set (WRENCH SET,BOX) is a group of box wrenches having different characteristics. It may include a HANDLE, EXTENSION WRENCH. See also WRENCH SET, COMBINATION, BOX AND OPEN END.
What is a Hot Line Stick? 26 Items: A Hot Line Stick is a hand tool consisting of a straight, round stick (pole) made of a suitable nonconductive material with a tool fixed to one end. The other end may be plain or have a butt mounting device fixed to it. Various types of attachments (hooks, rings, and bands) may be fixed to the body. It is designed for use in the repair and maintenance of live high voltage aerial lines. Excludes hot line sticks without heads.
Handle,Mattock-Pick 15 Items
What is a Wrench Kit? 73 Items: A Wrench Kit is an assortment of various types and sizes of wrenches such as SOCKET, SOCKET WRENCH; WRENCH, OPEN END, FIXED; WRENCH, BOX and the like. It may include adapter(s), ratchet(s) and the like. See also WRENCH SET (as modified.
What is a Brad Awl? 15 Items: A Brad Awl (AWL,BRAD) is a small, pointed tool used by shoemakers, saddlers, cabinetmakers, and the like for piercing small holes in wood, leather, and similar materials, and consists of a handle with a ferrule and a blade. The blade is round, terminating in a beveled, sharp straight edge and has a shank which passes through the center of the handle.
What is a Scratch Awl? 20 Items: A Scratch Awl (AWL,SCRATCH) is an item whose nominal length of blade is less than 4 inches (101.6 millimeters) and is provided with a nondetachable handle.
What is a Screw Extractor Set? 10 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 102 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
Jack,Scissors,Hand 26 Items
What is a Piston Ring Expander? 23 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
Mallet,Plastic 62 Items
Mallet,Rubber 10 Items
What is a Wood Mallet? 37 Items: A Wood Mallet (MALLET,WOOD) is excludes MALLET, CALKING; MALLET, HAWSING and MALLET, SERVING.
What is a Rack Bar Jack? 30 Items: A Rack Bar Jack (JACK,RACK BAR) is excludes JACK, BUMPER and JACK, REEL, HAND.
What is a Pneumatic Tire Valve Core Inserter And Remover? 14 Items: A Pneumatic Tire Valve Core Inserter And Remover (INSERTER AND REMOVER,PNEUMATIC TIRE VALVE CORE) is a bar of steel having a small cylindrical slotted end for removing or installing a valve core in a valve stem by a screwing motion. See also REPAIR TOOL, PNEUMATIC TIRE VALVE.
What is a Hand Tube Swaging Tool Kit? 20 Items: A Hand Tube Swaging Tool Kit (SWAGING TOOL KIT,TUBE,HAND) is a hand-operated noncutting tool consisting of one or more PUNCH, TUBE SWAGING, HAND and a tube flaring bar.
What is a Hand Tube Flaring Punch? 11 Items: A Hand Tube Flaring Punch (PUNCH,TUBE FLARING,HAND) is a noncutting tool having a shaped end or section designed to flare the ends of tubes. One type is designed to flare the ends of tubes against a tube sheet, and another to flare tube ends to mate with tube fittings. Includes punch components of FLARING TOOL, TUBE, HAND.
What is a Hose Strap Band Clamping Tool? 26 Items: A Hose Strap Band Clamping Tool (CLAMPING TOOL,STRAP BAND,HOSE) is an item designed to tension and lock metal straps around a rubber hose, and the like. It is also used to clamp and hold fittings therein.
What is a Mechanical Puller? 3073 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 470 Items
What is a Slip Joint Pliers? 84 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Brake Repair Pliers? 14 Items: A Brake Repair Pliers (PLIERS,BRAKE REPAIR) is a tool having jaws designed for use in brake repair operations, such as removing and replacing items such as keys, springs, and the like. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 226 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 12 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 81 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 56 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 15 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 11 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 29 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Cross Tip Screwdriver Set? 14 Items: A Cross Tip Screwdriver Set (SCREWDRIVER SET,CROSS TIP) is a group of SCREWDRIVER, CROSS TIP having different characteristics.
What is a Spanner Wrench Set? 18 Items: A Spanner Wrench Set (WRENCH SET,SPANNER) is a group of items under WRENCH, SPANNER having different characteristics.
What is a Drive Pin Punch Set? 31 Items: A Drive Pin Punch Set (PUNCH SET,DRIVE PIN) is a group of PUNCH, DRIVE PIN having different characteristics.
What is an Aligning Punch Set? 13 Items: An Aligning Punch Set (PUNCH SET,ALIGNING) is a group of PUNCH, ALIGNING having different characteristics. See also DRIFTPIN SET.
What is a Slugging Type Box Wrench Socket? 16 Items: A Slugging Type Box Wrench Socket (SOCKET,SLUGGING TYPE BOX WRENCH) is an item having a hexagonal external drive at one end, made to fit into the internal hexagonal or 12-point opening of a slugging type box wrench. The opposite end has a single-broached hexagonal opening of the same size as the external drive. The item is designed with extra thick walls to withstand the impact of sledge blows on the driving wrench.
What is a Mechanical Puller Step Plate? 44 Items: A Mechanical Puller Step Plate (STEP PLATE,MECHANICAL PULLER) is a circular disk, flanged to provide a shoulder, and designed to provide a base for the screw point of a PULLER, MECHANICAL when pulling externally mounted bearings, gears, and the like from hollow shafts or housings. It has a concentric, countersunk hole to accommodate the puller screw point.
What is a Solid Center Punch? 79 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Cable Type Ratchet Lever Puller? 20 Items: A Cable Type Ratchet Lever Puller (PULLER,RATCHET LEVER,CABLE TYPE) is an item consisting of a metal frame and ratchet lever reel to which is attached one end of a flexible cable (wire rope). The cable feeds through the fast eye in the metal frame, and may be reeved through a slip hook tackle hook. See also BINDER, LOAD; HOIST, WIRE ROPE and STRETCHER, WIRE.
What is an Electronic Equipment Tuning Wand? 18 Items: An Electronic Equipment Tuning Wand (TUNING WAND,ELECTRONIC EQUIPMENT) is a hand-held rod used in determining the adjustment of the windings of a radio frequency coil. It is made of insulating material with iron on one end and brass on the other end. By inserting the iron end in the coil, the inductance is increased and by inserting the brass end, the inductance is decreased.
What is a Combination Open End And Spanner Wrench? 14 Items: A Combination Open End And Spanner Wrench (WRENCH,OPEN END AND SPANNER,COMBINATION) is a tool having open end wrench characteristics at one end and spanner wrench features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s) at the other end.
What is a Detent Handling Tool? 187 Items: A Detent Handling Tool (HANDLING TOOL,DETENT) is a specially designed handling tool consisting of a rigid bar with a T-handle on one end. The other end is equipped with threads designed to mate the threads of a detent to facilitate inserting or extracting.
What is a Hand Material Handling Hook? 23 Items: A Hand Material Handling Hook (HOOK,MATERIAL HANDLING,HAND) is a hook whose curved end conforms to Style AP1, AP2, AP3 or AP4 of Reference Drawing Group AP. Excludes HOOK, MANHOLE COVER, HAND; HOOK, WIRE BREAKING, HAND; HOOK, ROCK CRUSHER FEEDING, HAND; HOOK, STRAINER REMOVING, HAND and HOOKS, BAG HANDLING, HAND.
What is a Magnetic Retrieving Tool? 11 Items: A Magnetic Retrieving Tool (RETRIEVING TOOL,MAGNETIC) is a hand-operated magnetic device used to locate and pick up metallic articles, such as bolts, nuts, pins, washers, and the like, in confined spaces. It may be rigid, flexible or adjustable. Excludes FINGER, MECHANICAL.
What is a Mechanical Puller Adapter? 78 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Combination Box And Open End Box Wrench? 13 Items: A Combination Box And Open End Box Wrench (WRENCH,BOX AND OPEN END BOX,COMBINATION) is a double end wrench, box and open end box, primarily designed for removing or replacing tube fittings. The opening in the open end box may be machined at an angle from the longitudinal center line of the wrench.
What is a Screw Thread Insert Inserter? 136 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Flat Tip Screwdriver Set? 48 Items: A Flat Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP) is a group of SCREWDRIVER, FLAT TIP having different characteristics.
What is a Terminal Crimping Tool Contact Positioner? 89 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 16 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is an Adjustable Wrench? 138 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 239 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 75 Items
Handle,Shovel 10 Items
What is a Socket Wrench Spanner Attachment? 88 Items: A Socket Wrench Spanner Attachment (SPANNER ATTACHMENT,SOCKET WRENCH) is an item having an adjustable or fixed span with pin, hook, or key type end that is used to fit and turn various size retaining rings, cover plates, plugs, couplings, and like parts. Usually designed to be driven by a male driver.
What is a Retaining Ring Installation Tool? 44 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Tacker? 16 Items: A Tacker is a hand-operated, hammerlike or gunlike item without a clincher, used to drive preformed connecting elements like pins, nails or staples through one object or piece of material into another. Excludes STAPLER (as modified).
What is a Bearing And Bushing Inserter? 290 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 207 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 939 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 14 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 93 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 161 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 94 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 141 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 53 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Six Point Tip Screwdriver? 155 Items: A Six Point Tip Screwdriver (SCREWDRIVER,SIX POINT TIP) is a manual screwdriver having a single nonremoveable blade having a tip with six rounded points.
What is a Seal Inserter And Remover? 147 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 478 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is a Preformed Packing Inserter And Remover? 34 Items: A Preformed Packing Inserter And Remover (INSERTER AND REMOVER,PREFORMED PACKING) is a hand tool designed to install and remove a PACKING, PREFORMED.
What is a Pin Remover? 34 Items: A Pin Remover (REMOVER,PIN) is a hand tool designed to facilitate the removal of a pin from a hole.
What is a Pin Inserter And Remover? 13 Items: A Pin Inserter And Remover (INSERTER AND REMOVER,PIN) is a rodlike tool designed to facilitate the insertion and removal of a pin from a hole.
What is an Electrical Contact Inserter And Remover? 37 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Piston Inserter? 40 Items: A Piston Inserter (INSERTER,PISTON) is a tool designed to permit installation of a piston or piston assembly without damaging the packings or piston.
What is a Spring Inserter And Remover? 85 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 13 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Stud Inserter? 22 Items: A Stud Inserter (INSERTER,STUD) is a device designed to drive in studs. It does not have any facilities for removing or extracting studs. See also INSERTER AND REMOVER, STUD.
What is a Stud Inserter And Remover? 17 Items: A Stud Inserter And Remover (INSERTER AND REMOVER,STUD) is a group of items designed to extract and to drive studs. It may include collets, guides, housings, holders and the like. See also REMOVER SET, STUD and INSERTER, STUD.
What is a Gear Inserter? 54 Items: A Gear Inserter (INSERTER,GEAR) is a hand tool designed to install various gears onto a gearshaft. It may be operated by a pushing or a striking force.
What is a Crimping Tool Die? 73 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is an Electrical Connector Inserter? 45 Items: An Electrical Connector Inserter (INSERTER,ELECTRICAL CONNECTOR) is a hand tool designed to hold an electrical connector, and to assist in the positioning and installation of the connector on a cover, panel or the like.
What is a Float? 12 Items: A Float is a tool used for concrete, plastering and grouting work.
What is a Mechanical Puller Set? 19 Items: A Mechanical Puller Set (PULLER SET,MECHANICAL) is two or more separate PULLER, MECHANICAL of different fixed sizes.
What is a Lifting Pneumatic Bag? 11 Items: A Lifting Pneumatic Bag (PNEUMATIC BAG,LIFTING) is a device made of flexible material designed to lift another item by being placed under the item and being inflated with air or some other gas. It will have a means of being connected to an air or gas source and may include a connector hose, a control valve and/or a pressure regulator.
What is a Cable Tie Installation Tool? 22 Items: A Cable Tie Installation Tool (INSTALLATION TOOL,CABLE TIE) is a lightweight, hand-held, hand-operated tool designed to fasten cable ties, straps and the like. Cable tie is inserted into the nose of the tool flush to the cable tie head. Trigger handle tightens cable tie and cuts off any excess. These installation tools are available in a variety of sizes depending on their intended use with miniature, intermediate, standard, heavy or extra heavy cross section ties.
What is a Bearing Staking Installation Tool? 159 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
Wrench Set,Ratchet 15 Items
What is a Sealant Dispenser? 26 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Retaining Ring Pliers Set? 10 Items: A Retaining Ring Pliers Set (PLIERS SET,RETAINING RING) is a group of PLIERS, RETAINING RING having different characteristics.
What is a Hand Armament Subsystem Carrier? 52 Items: A Hand Armament Subsystem Carrier (CARRIER,ARMAMENT SUBSYSTEM,HAND) is a metallic item with a clamp device and/or space for depositing articles. It is used for transporting weapon parts during maintanence and/or repair work, such as gun barrel, automatic loader, breechblock and the like.
What is a Ring Retaining Pliers Tip Set? 13 Items: A Ring Retaining Pliers Tip Set (TIP SET,PLIERS,RING RETAINING) is a collection of removable metallic tips in matched pairs used to provide various size capablities to PLIERS, RING RETAINING which permits the removal and installation of internal and external retaining rings.
What is a Plug Electrical Connector Extractor? 45 Items: A Plug Electrical Connector Extractor (EXTRACTOR,ELECTRICAL CONNECTOR,PLUG) is a hand tool designed to disassemble CONNECTOR, PLUG, ELECTRICAL from a CONNECTOR, RECEPTACLE, ELECTRICAL.
What is a Torque Wrench Adapter Set? 10 Items: A Torque Wrench Adapter Set (ADAPTER SET,TORQUE WRENCH) is tWO or more ADAPTER, TORQUE WRENCH of different sizes.
What is an Electronic Component Inserter And Remover? 79 Items: An Electronic Component Inserter And Remover (INSERTER AND REMOVER,ELECTRONIC COMPONENT) is an item which can insert or remove an electronic component package such as MICROCIRCUIT; RESISTOR, NETWORK (as modified); and the like from its mounting position or socket. Excludes INSERTER AND REMOVER, ELECTRICAL CONTACT; REMOVER, ELECTRICAL CONTACT; EXTRACTOR, ELECTRICAL CARD; EXTRACTOR, ELECTRONIC CRYSTAL UNIT; EXTRACTOR, ELECTRON TUBE.
What is an Impact Type Bit Set And Handle Screwdriver? 14 Items: An Impact Type Bit Set And Handle Screwdriver (SCREWDRIVER,BIT SET AND HANDLE,IMPACT TYPE) is an item consisting of a set of screwdriver bits and a impact driver to accommodate the bits of various types and characteristics. It is designed to transmit a strong rotating movement by the impact of a hammer blowed on the impact driver. It is used to loosen rusted or seized screws. Excludes SCREWDRIVER, BIT SET AND HANDLE.
What is a Hand Vise Jaw? 19 Items: A Hand Vise Jaw (JAW,VISE,HAND) is an item consisting of two opposing parts of a VISE, HAND. The item is moveable and able to open and close. It can hold, grasp or clamp work.
What is a Screwdriver Handle? 28 Items: A Screwdriver Handle (HANDLE,SCREWDRIVER) is an item used to accommodate various types of BIT, SCREWDRIVER. It is designed to rotate a bit that is used for installing or removing screws.
What is a Wire Twister Pliers? 25 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 284 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is a Mechanical Puller Body? 45 Items: A Mechanical Puller Body (BODY,PULLER,MECHANICAL) is an item designed to support and enclose the internal parts of a PULLER,MECHANICAL.
What is a Flat Tip And Cross Tip Screwdriver Set? 39 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is a Socket Wrench Screwdriver Attachment Set? 22 Items: A Socket Wrench Screwdriver Attachment Set (SCREWDRIVER ATTACHMENT SET,SOCKET WRENCH) is a set of screwdriver attachment, socket wrench of different sizes. Items consist of a female square drive on one end to attach to a handle, socket wrench and various screwdriver tip configurations on the opposite end. Excludes SCREWDRIVER ATTACHMENT,SOCKET WRENCH
What is an Oil Filter Wrench? 44 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 430 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Communications Equipment Spring Adjuster? 13 Items: A Communications Equipment Spring Adjuster (ADJUSTER,SPRING,COMMUNICATIONS EQUIPMENT) is a single or double end tool, equipped with slot(s) of various dimensions or with cylindrical rod(s), used for adjusting the springs or spring tensioned parts of electronic equipment.
What is a Rotating Members Aligning Tool? 32 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
What is a Final Drive Assembly Alignment Pin? 41 Items: A Final Drive Assembly Alignment Pin (ALIGNMENT PIN,FINAL DRIVE ASSEMBLY) is a special designed pin used in the assembling of the final drive.
Arm,Handling Tool 77 Items
What is a Splicing Sleeve Compressing Tool? 23 Items: A Splicing Sleeve Compressing Tool (COMPRESSING TOOL,SPLICING SLEEVE) is a hand tool having hinged leverage handles similar to a CUTTER, BOLT or pliers, designed to compress a splicing sleeve when joining the ends of two conductors, or when forming an eye splice in the end of a wire rope. Excludes CRIMPING TOOL, TERMINAL, HAND.
What is a Hand Screw Jack Extension? 14 Items: A Hand Screw Jack Extension (EXTENSION,HAND SCREW JACK) is a length of externally threaded rigid shafting which is the adjustable section of a JACK, SCREW, HAND.
What is a Mechanical Puller Gear Adapter? 21 Items: A Mechanical Puller Gear Adapter (GEAR ADAPTER,PULLER,MECHANICAL) is an adapter that adapts a PULLER,MECHANICAL, to pull a certain gear.
Handle,Hydraulic Jack 18 Items
What is a Female Electrical Contact Resizing Tool? 11 Items: A Female Electrical Contact Resizing Tool (RESIZING TOOL,FEMALE ELECTRICAL CONTACT) is a tool designed to shape to a specific size, female contacts such as those used on electrical connectors, tube sockets, crystal sockets, and pin jacks.
What is a Screwdriver And Socket Wrench Combination? 13 Items: A Screwdriver And Socket Wrench Combination is a hand-tool formed into an integral unit with a socket wrench at one end and a screwdriver bit at the other end. See also SCREWDRIVER AND WRENCH ASSEMBLY.
What is a Hand Hose Fitting Swaging Tool Kit? 11 Items: A Hand Hose Fitting Swaging Tool Kit (SWAGING TOOL KIT,HOSE FITTING,HAND) is a device, hydraulically actuated by hand or power operated pump, consisting of face plate, adapter plate, finger cages, fingers, ram, bushing, and expanding mandrels combined on a single base in various functional arrangements. It is used for swaging the outside diameter of hose assembly fittings, expanding the inside diameter of hose assemblies, and securing the fabrication of hose assemblies. Included are a hand or power operated pump, lubricant, cases, and trays.
What is a Catch Lever Tool? 12 Items: A Catch Lever Tool (LEVER TOOL,CATCH) is a specially designed hand tool which engages the opening and closing lever of a CATCH (as modified) for ease of operation. It is constructed of thin rigid material, usually flat, and one end has an engaging tongue.
What is a Manual Impact Wrench? 11 Items: A Manual Impact Wrench (WRENCH,IMPACT,MANUAL) is a manually operated handheld tool consisting of spring-loaded handle and a power-impact head which delivers a torsional impact from either continuous movement of the handle in one direction, or by a reciprocating action. It is used in tightening and loosening fasteners, such as bolts, nuts, and the like. The item may include sockets, extensions and offset fittings, nut runners, and the like.
What is a Drift? 63 Items: A Drift is an item consisting of a tubular body fitted with replaceable tips. It is designed to insert or remove mechanical components where space is restricted.
What is a Nutdriver? 46 Items: A Nutdriver is a non-powered hand tool with a screwdriver style handle, shaft and formed female hex or square socket at driving end.
What is a Locking Device Removal Tool? 12 Items: A Locking Device Removal Tool (REMOVAL TOOL,LOCKING DEVICE) is a hand tool designed to facilitate the removal of a WASHER, KEY and a LOCKING PLATE, NUT AND BOLT.
What is a Hydraulic Fitting Crimping Tool Head? 26 Items: A Hydraulic Fitting Crimping Tool Head (HEAD,CRIMPING TOOL,HYDRAULIC FITTING) is a component of a crimping tool used to compress fittings on fluid tubes. It consists of a U-shape item, in which, are mounted different sizes of DIE, CRIMPING TOOL for tubes of various diameters.
What is a Torque Screwdriver? 11 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.
What is a Special Purpose Combination Wrench? 13 Items: A Special Purpose Combination Wrench (WRENCH,COMBINATION,SPECIAL PURPOSE) is a tool having a combination of ends and facets. The ends may have open end, box or spanner characteristics. The sides may have features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s). Designed to fit specific items, not sized as standard or metric.
What is a Screwdriver Bit Holder? 56 Items: A Screwdriver Bit Holder (HOLDER,SCREWDRIVER BIT) is an attachment with a socket end for accepting male hexagon shank insert bits and a drive end for adapting to a portable power or hand tool.
What is a Telescoping Pole? 16 Items: A Telescoping Pole (POLE,TELESCOPING) is an item which is designed to be extended or compressed by the sliding of overlapping sections. This item may or may not be able to accommodate an extension.

Stock Items From Supply Class 5120 Page 102 of 110

5120-14-468-7907
Socket Head Screw Key

144687907
66-P55: RNCC: 3 | RNVC: 2
66P55: RNCC: 3 | RNVC: 2
3272670278578: RNCC: 5 | RNVC: 2

22 Mar 1994

5120-14-372-9515
Flat Tip Screwdriver

143729515
7376: RNCC: 3 | RNVC: 2
85-691-6886: RNCC: 6 | RNVC: 9

21 Sep 1981

5120-14-333-7347
Douil Clique Ensemb

143337347
8-0118PZ: RNCC: 3 | RNVC: 2
9760-88: RNCC: 5 | RNVC: 2

23 Apr 1976

5120-14-393-7995
Pliers

143937995
NO PRIMARY REF14-393-7995: RNCC: 3 | RNVC: 2
93291947006-3: RNCC: 5 | RNVC: 2
99871947119: RNCC: 5 | RNVC: 9

23 Jun 1984

5120-14-201-2198
Socket Wrench Socket

142012198
NO PRIMARY REF14-201-2198: RNCC: 3 | RNVC: 2
0055350: RNCC: 5 | RNVC: 2
3148510553559: RNCC: 5 | RNVC: 2
0183481X00: RNCC: 5 | RNVC: 2
91623429: RNCC: 5 | RNVC: 2
S.17L: RNCC: 5 | RNVC: 2
S17L: RNCC: 5 | RNVC: 2

1 Jan 1962

5120-14-463-1426
Position Cle

144631426
50399: RNCC: 3 | RNVC: 2
85-695-0310: RNCC: 6 | RNVC: 9

26 May 1993

5120-14-212-9172

5120-14-577-5417
Hand Lead Seal Press

145775417
MDS140111: RNCC: 3 | RNVC: 2

24 Sep 2013

5120-14-368-4057
Mechanical Puller Attachment

143684057
8813285003: RNCC: 3 | RNVC: 2

20 Feb 1981

5120-14-442-3953
Socket Wrench Screwdriver Attachment

144423953
J47835: RNCC: 3 | RNVC: 2
J47835: RNCC: 5 | RNVC: 9

15 Oct 1990

5120-14-232-0475
Inserted Hammer Face

142320475
EC.32: RNCC: 3 | RNVC: 2
3148510224206: RNCC: 5 | RNVC: 2
EC32: RNCC: 5 | RNVC: 2
0111375W00: RNCC: 5 | RNVC: 2
91560328: RNCC: 5 | RNVC: 2
0022420: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-216-1875
Spanner Wrench

142161875
RT2736: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-386-4849
Face Spanner Wrench Socket

143864849
F46138: RNCC: 3 | RNVC: 2
F461380001: RNCC: 5 | RNVC: 2

24 Aug 1983

5120-14-328-7965
Detent Handling Tool

143287965
8811347000: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-548-6393
Face Spanner Wrench Socket

145486393
Q47789: RNCC: 3 | RNVC: 2
Q47789: RNCC: 5 | RNVC: 2

27 Jan 2006

5120-14-524-4971
Spanner Wrench

145244971
6401POC: RNCC: 3 | RNVC: 2

21 Mar 2001

5120-14-431-7842
Socket Head Screw Key

144317842
0453-6089902: RNCC: 3 | RNVC: 2

10 May 1989

5120-14-382-6784
Spanner Wrench

143826784
8811060301: RNCC: 3 | RNVC: 2

17 Feb 1983

5120-14-447-1863
Mechanical Finger

144471863
NGS1A2514: RNCC: 3 | RNVC: 2

3 May 1991

5120-14-356-1889
Spanner Wrench

143561889
88090: RNCC: 3 | RNVC: 2

25 Apr 1979

5120-14-361-9910
Screwdriver Bit

143619910
27323123: RNCC: 3 | RNVC: 2

20 Feb 1980

5120-14-455-5066
Pliers

144555066
115-130: RNCC: 3 | RNVC: 2

26 May 1992

5120-14-504-6590
Socket Wrench Crowfoot Attachment

145046590
18.17: RNCC: 3 | RNVC: 2
3148510933627: RNCC: 5 | RNVC: 2
0093362: RNCC: 5 | RNVC: 9

25 Feb 1998

5120-14-506-1170
Hand Screw Jack Extension

145061170
TB20: RNCC: 3 | RNVC: 2

6 Apr 1998

5120-14-526-0474
Electronic Crystal Unit Extractor

145260474
4202111N001: RNCC: 3 | RNVC: 2

28 Jun 2001

5120-14-227-8924
Offset Screwdriver

142278924
35-48: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-443-9754
Open End Wrench

144439754
GS120: RNCC: 3 | RNVC: 2

18 Dec 1990

5120-14-347-5633

5120-14-510-9464
Conducte Extracteur

145109464
37351: RNCC: 3 | RNVC: 2

25 Nov 1998

5120-14-503-7101
Flat Tip Screwdriver

145037101
ENFD6513-A1-2X6-5X150X255: RNCC: 3 | RNVC: 2

28 Jan 1998

5120-14-422-2329
Spanner Wrench

144222329
0436-01-121000: RNCC: 3 | RNVC: 2

24 Feb 1988

5120-14-229-8609
Flat Tip Screwdriver

142298609
E74-351-1X6-5X100BAI0NNETTE: RNCC: 2 | RNVC: 2

1 Jan 1967

5120-14-529-3703
Spanner Wrench

145293703
TN522/97ID48959: RNCC: 3 | RNVC: 2

26 Mar 2002

5120-14-458-3772
Rotating Members Aligning Tool

144583772
600-917-73-00: RNCC: 3 | RNVC: 2

21 Oct 1992

5120-14-345-5495
Cross Tip Screwdriver

143455495
M3-077-12: RNCC: 3 | RNVC: 2
85-689-5019: RNCC: 6 | RNVC: 9

5 Oct 1977

5120-14-214-4940
Offset Screwdriver

142144940
9970-115-250: RNCC: 3 | RNVC: 2
9970-115-250-00: RNCC: 5 | RNVC: 2

1 Jan 1965

5120-14-514-0211
Open End Wrench

145140211
ENFD29159-38X39: RNCC: 3 | RNVC: 2

22 Apr 1999

5120-14-311-4547
Open End Wrench

143114547
3160S95-42-040: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-323-4464
Open End Wrench

143234464
M16-025: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-375-3306
Electrical Card Extractor

143753306
3511-245-06541: RNCC: 3 | RNVC: 2
3511 245 06541: RNCC: 5 | RNVC: 2

26 Feb 1982

5120-14-438-9642
Bearing And Bushing Remover

144389642
330A98-2179-00: RNCC: 3 | RNVC: 2

11 Apr 1990

5120-14-334-4455
Spanner Wrench

143344455
NO PRIMARY REF14-334-4455: RNCC: 3 | RNVC: 2
RAPACE2: RNCC: 5 | RNVC: 9

1 Jun 1976

5120-14-316-9700
Hand-Operated Grommet And Eyelet Press

143169700
NO PRIMARY REF14-316-9700: RNCC: 3 | RNVC: 2
PM3A: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-343-1813
Screw Thread Insert Inserter

143431813
01500220400: RNCC: 3 | RNVC: 2

16 Jun 1977

5120-14-518-3671
Combination Box And Open End Wrench

145183671
10572140: RNCC: 3 | RNVC: 2

2 Feb 2000

5120-14-427-2196
Bearing And Bushing Inserter And Remover

144272196
46MS047-27: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-507-0010
Screwdriver Bit

145070010
ENFD6526-C1-2X8X41X5-16: RNCC: 3 | RNVC: 2
F300 0P 000 1286: RNCC: 5 | RNVC: 2

3 Jun 1998

5120-14-393-0535
Open End Wrench

143930535
CM136-81ST03: RNCC: 3 | RNVC: 2
13681ST03: RNCC: 3 | RNVC: 9

12 Apr 1984

5120-14-520-4896
Cle A Creneaux

145204896
2P85613-00: RNCC: 3 | RNVC: 2

17 May 2000

5120-14-289-3823

5120-14-574-5796
Ratchet Wrench

145745796
19240820: RNCC: 3 | RNVC: 2

1 Feb 2013

5120-14-280-2196

5120-14-516-9032
Socket Wrench Socket Set

145169032
NS.405A: RNCC: 3 | RNVC: 2
NS.405E: RNCC: 5 | RNVC: 2
NS405E: RNCC: 5 | RNVC: 2

20 Oct 1999

5120-14-324-8869
Face Spanner Wrench Socket

143248869
0-702463-1: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-548-9212
Spanner Wrench

145489212
01548: RNCC: 3 | RNVC: 2
00335972: RNCC: 5 | RNVC: 2

23 Feb 2006

5120-14-509-2848
Hole Sheet Metal Holder

145092848
0854637800: RNCC: 3 | RNVC: 2

23 Oct 1998

5120-14-302-5102

5120-14-490-1811
Offset Screwdriver

144901811
96131148: RNCC: 3 | RNVC: 2

17 Sep 1997

5120-14-463-1337
Armement Clef

144631337
520-610: RNCC: 3 | RNVC: 2

26 May 1993

5120-14-469-9058
Open End Wrench

144699058
46.19VSE: RNCC: 3 | RNVC: 2
3148511056905: RNCC: 5 | RNVC: 2
0105690: RNCC: 5 | RNVC: 9

18 May 1994

5120-14-212-9137

5120-14-398-1550
Cle A Broche

143981550
NO PRIMARY REF14-398-1550: RNCC: 3 | RNVC: 2
32968: RNCC: 5 | RNVC: 9

31 Jan 1985

5120-14-397-7232

5120-14-285-1184

5120-14-428-5244
Screwdriver Bit

144285244
MJK0142801: RNCC: 3 | RNVC: 2

8 Dec 1988

5120-14-412-7439
Spanner Wrench

144127439
48-417-703-424: RNCC: 3 | RNVC: 2
48-417-703-424: RNCC: 5 | RNVC: 9

29 Oct 1986

5120-14-386-1622
Bearing And Bushing Inserter

143861622
6802J32-1661-20: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-436-4573
Spanner Wrench

144364573
9970-115-733: RNCC: 3 | RNVC: 2

3 Jan 1990

5120-14-350-7184
Cle Pour Bosse

143507184
BN311-545M7REP6: RNCC: 3 | RNVC: 2
GY18244C54-57ET60-64: RNCC: 5 | RNVC: 2

12 Jul 1978

5120-14-043-1676
Cle Pyromeca

140431676
0766394N00: RNCC: 3 | RNVC: 2
069U20-766394N: RNCC: 5 | RNVC: 2

10 Apr 1984

5120-14-219-3649
Cle A Carre Femelle

142193649
90399: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-531-6281
Open End Wrench

145316281
99405.00: RNCC: 3 | RNVC: 2
TA5113P118: RNCC: 5 | RNVC: 2

4 Sep 2002

5120-14-343-8337

5120-14-261-4515

5120-14-442-1514
Serre Tole Outil

144421514
853-600-246-6: RNCC: 3 | RNVC: 2

3 Oct 1990

5120-14-393-5090
Helice Extracteur

143935090
T8002BM4A: RNCC: 3 | RNVC: 2

7 Apr 1984

5120-14-409-5102
Bearing Staking Installation Tool

144095102
8813793000: RNCC: 3 | RNVC: 2

28 May 1986

5120-14-541-9004
Screwdriver Bit Holder

145419004
61395000AA: RNCC: 3 | RNVC: 2

2 Jul 2004

5120-14-232-7191
Hand Terminal Crimping Tool

142327191
59255: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-435-9400
Open End Wrench

144359400
20111055: RNCC: 3 | RNVC: 2

29 Nov 1989

5120-14-423-2255
Basculeur Cle Dyn

144232255
SP1735D-3-1020: RNCC: 3 | RNVC: 2

13 Apr 1988

5120-14-257-2913
Plaque Blocage Pale

142572913
FH152-919: RNCC: 3 | RNVC: 2
100A500041: RNCC: 5 | RNVC: 2

1 Jan 1969

5120-14-245-2067
Embout Pour Outil D

142452067
0187-024-000: RNCC: 3 | RNVC: 2
00-987-7233: RNCC: 6 | RNVC: 9

1 Jan 1968

5120-14-352-3186
Reglage Ressort Cle

143523186
MHG290-21: RNCC: 3 | RNVC: 2
MHG290-21: RNCC: 5 | RNVC: 2

16 Oct 1978

5120-14-275-9129
Extenseurs Jeu

142759129
R31674-21-26-29: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-432-8473
Socket Wrench Socket

144328473
853-100-213-0: RNCC: 3 | RNVC: 2

28 Jun 1989

5120-14-388-2326
Socket Head Screw Key

143882326
VTR501-2-1138: RNCC: 3 | RNVC: 2

12 Oct 1983

5120-14-265-9585
Matrice Pour Pince

142659585
48816: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-220-7927
Open End Wrench

142207927
RACC25: RNCC: 3 | RNVC: 2
RACC25: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-284-3381
Cle Presse-Etoupe

142843381
R28019SM2: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-576-6373
Mechanical Puller S

145766373
8813927002: RNCC: 3 | RNVC: 2

2 Jul 2013

5120-14-359-7544
Open End Wrench

143597544
C66151: RNCC: 3 | RNVC: 2
101004: RNCC: 5 | RNVC: 2

15 Oct 1979

5120-14-316-6042

5120-14-308-2160

5120-14-322-9748

5120-14-537-6020
Open End Wrench

145376020
13A-10X11: RNCC: 3 | RNVC: 2

12 Nov 2003

5120-14-496-8924
Socket Head Screw Key

144968924
DIN5265A0-8X5FE-NI10BCRR: RNCC: 3 | RNVC: 2
F300 0T 022 2417: RNCC: 6 | RNVC: 9

15 Oct 1997

5120-14-510-0491
Flat Tip Screwdriver

145100491
NO PRIMARY REF14-510-0491: RNCC: 3 | RNVC: 2
85500: RNCC: 5 | RNVC: 9
5120AA2059429: RNCC: 6 | RNVC: 9

4 Nov 1998

5120-14-515-0343
Spanner Wrench

145150343
Y075-065-000B: RNCC: 3 | RNVC: 2

30 Jun 1999

5120-14-222-6195
Socket Wrench Socket

142226195
S7-16KK: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-528-0701
Drift

145280701
888-514-700-1: RNCC: 3 | RNVC: 2

12 Dec 2001

5120-14-353-2571
Adjustable Wrench

143532571
346-101: RNCC: 3 | RNVC: 2
346-101: RNCC: 5 | RNVC: 9

8 Dec 1978

5120-14-382-5518
Electrical Card Extractor

143825518
NO PRIMARY REF14-382-5518: RNCC: 3 | RNVC: 2
29356142: RNCC: 5 | RNVC: 9

17 Feb 1983

5120-14-280-8816
Cle Embout De Conne

142808816
PA356-2M232P18: RNCC: 3 | RNVC: 2
PA356-2M232P18: RNCC: 3 | RNVC: 9

1 Jan 1971

5120-14-552-8458
Pliers

145528458
187.18G: RNCC: 3 | RNVC: 2
3148516739346: RNCC: 5 | RNVC: 2
187.18G: RNCC: 5 | RNVC: 2

7 Feb 2007

5120-14-543-6832
Hand Hose Fitting Swaging Tool Kit

145436832
PMC25: RNCC: 3 | RNVC: 2

2 Dec 2004

5120-14-491-0117
Cle A C

144910117
4602 007 200 002: RNCC: 3 | RNVC: 2
F300 0T 001 0903: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-406-5700
Face Spanner Wrench Socket

144065700
853-200-734-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-401-5662
Bearing And Bushing Inserter And Remover

144015662
355A93-3444-00: RNCC: 3 | RNVC: 2

13 Jun 1985

5120-14-340-3946
Electrical Contact Inserter

143403946
91066-2: RNCC: 3 | RNVC: 2
85-800-8612: RNCC: 6 | RNVC: 9
00-132-5739: RNCC: 6 | RNVC: 9

14 Feb 1977

5120-14-370-4528
Saddler's Sewing Awl

143704528
NO PRIMARY REF14-370-4528: RNCC: 3 | RNVC: 2
C47-1B270: RNCC: 5 | RNVC: 9

18 May 1981

5120-14-386-6781
Socket Wrench Socket

143866781
853-100-014-0: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-200-2096
Open End Wrench

142002096
8810195007: RNCC: 3 | RNVC: 2
800-01-540-00: RNCC: 5 | RNVC: 2
8000154000: RNCC: 5 | RNVC: 2
881-0-195-007: RNCC: 5 | RNVC: 2

1 Jan 1962

5120-14-401-2777
Rotating Members Aligning Tool

144012777
101638: RNCC: 3 | RNVC: 2

5 Jun 1985

5120-14-220-7171

5120-14-283-4936
Arrache Moyeu

142834936
406994: RNCC: 3 | RNVC: 2
406994: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-506-7643
De Montage Outil

145067643
M12170: RNCC: 3 | RNVC: 2

14 May 1998

5120-14-552-8257
Socket Head Screw Key Set

145528257
82H.JP8U: RNCC: 3 | RNVC: 2
82H.JP8U: RNCC: 5 | RNVC: 2
3148511237762: RNCC: 5 | RNVC: 2

6 Feb 2007

5120-14-271-6078
Open End Wrench

142716078
E74301C5WWF: RNCC: 2 | RNVC: 1

1 Jan 1970

5120-14-573-8692
Screwdriver Bit

145738692
ETORM.102: RNCC: 3 | RNVC: 2
3148516399045: RNCC: 5 | RNVC: 2
0639904: RNCC: 5 | RNVC: 2

16 Nov 2012

5120-14-266-6998

5120-14-262-2017

5120-14-230-8070

5120-14-285-4850
Open End Wrench

142854850
E74302P3-2X4AKB: RNCC: 2 | RNVC: 2

1 Jan 1972

5120-14-262-9726
Cle Rodage Clapet

142629726
6800-2112: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-571-6912
Spatula

145716912
RD-MJ-0040: RNCC: 3 | RNVC: 2

24 Apr 2012

5120-14-573-4897
Jaw Cable Grip

145734897
T-6975-E3-03-P201: RNCC: 3 | RNVC: 2

16 Oct 2012

5120-14-537-4384
Bearing And Bushing Inserter

145374384
350A93-3322-00: RNCC: 3 | RNVC: 2

3 Nov 2003

5120-14-329-3071
Cle A Panier

143293071
GSM196-010F71: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-286-7841

5120-14-338-6973

5120-14-473-3594
De Montage Outil

144733594
8816011000: RNCC: 3 | RNVC: 2

13 Dec 1994

5120-14-238-1350

5120-14-272-3741

5120-14-227-7213

5120-14-292-0796
Appareil Pied Biell

142920796
24545930100: RNCC: 3 | RNVC: 2
245459301: RNCC: 5 | RNVC: 9
145J301: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-233-6087

5120-14-348-4425
Spanner Wrench

143484425
GSM084-008F10: RNCC: 3 | RNVC: 2
GSM084-08F10: RNCC: 5 | RNVC: 2

29 Mar 1978

5120-14-535-0434
Open End Wrench

145350434
0370-0128: RNCC: 3 | RNVC: 2

30 Apr 2003

5120-14-271-8603
Open End Wrench

142718603
NO PRIMARY REF14-271-8603: RNCC: 3 | RNVC: 2
280561: RNCC: 5 | RNVC: 9

1 Jan 1970

5120-14-378-5515
Spanner Wrench

143785515
6801J33-4043-20: RNCC: 3 | RNVC: 2
6801360A33-4043-20: RNCC: 5 | RNVC: 2

11 Aug 1982

5120-14-319-8441

5120-14-557-7684
Cable Type Ratchet Lever Puller

145577684
5469: RNCC: 3 | RNVC: 2

9 Jul 2008

5120-14-344-3391
Siege Clape Extract

143443391
C46832: RNCC: 3 | RNVC: 2

10 Aug 1977

5120-14-422-5983
Speciale Pince

144225983
NO PRIMARY REF14-422-5983: RNCC: 3 | RNVC: 2
302RES42020: RNCC: 5 | RNVC: 9

10 Mar 1988

5120-14-295-6237
Mechanical Puller Adapter

142956237
207-11-17: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-306-5958
Screwdriver And Socket Wrench Combination

143065958
NO PRIMARY REF14-306-5958: RNCC: 3 | RNVC: 2
54612: RNCC: 5 | RNVC: 9

4 Aug 1999

5120-14-226-3122
Manchon Special

142263122
60290-01-400M11: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-378-5527
Bearing And Bushing Inserter

143785527
6802J33-4051-00: RNCC: 3 | RNVC: 2
6802360-33-4051-00: RNCC: 5 | RNVC: 2

11 Aug 1982

5120-14-505-9240
Flat Tip Screwdriver

145059240
ENFD6514-A0-8X4X75X170: RNCC: 3 | RNVC: 2

30 Mar 1998

5120-14-517-9939
Six Point Tip Screwdriver

145179939
ENFD6577-6X50: RNCC: 3 | RNVC: 2

21 Jan 2000

5120-14-469-9275
Bearing And Bushing Inserter

144699275
16849153: RNCC: 3 | RNVC: 2
16849153: RNCC: 5 | RNVC: 9

18 May 1994

5120-14-540-3102
Detent Handling Tool

145403102
10599107: RNCC: 3 | RNVC: 2

18 Mar 2004

5120-14-423-2348
Bras Cle Dyn

144232348
SP2086D-1: RNCC: 3 | RNVC: 2

14 Apr 1988

5120-14-405-0879
Bride Serrage Rapid

144050879
BS-4S: RNCC: 3 | RNVC: 2

20 Nov 1985

5120-14-513-9468
Flat Tip Screwdriver

145139468
ENFD6560-1-6X8X150: RNCC: 3 | RNVC: 2

19 Apr 1999

5120-14-540-4551
Cable Type Ratchet Lever Puller

145404551
TC 32: RNCC: 3 | RNVC: 2
STB6324STCM 06 IND.A DU 11/07/02: RNCC: 5 | RNVC: 2

31 Mar 2004

5120-14-274-8697
Extenseur Ensemble

142748697
R31674-14-18R26: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-513-3738
Socket Wrench Crowfoot Attachment

145133738
RT20876: RNCC: 3 | RNVC: 2

17 Mar 1999

5120-14-548-7357
Socket Wrench Socket

145487357
SJ.15H: RNCC: 3 | RNVC: 2

3 Feb 2006

5120-14-343-1865
Spanner Wrench

143431865
199929: RNCC: 3 | RNVC: 2

16 Jun 1977

5120-14-476-1222
Open End Wrench

144761222
10444477: RNCC: 3 | RNVC: 2

22 May 1995

5120-14-576-6449
Mechanical Puller S

145766449
8816826002: RNCC: 3 | RNVC: 2

2 Jul 2013

5120-14-266-1706
Socket Head Screw Key

142661706
52: RNCC: 3 | RNVC: 2
3599027: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-294-8635
Screwdriver Bit Set And Handle

142948635
217P10: RNCC: 3 | RNVC: 2
SYB0319: RNCC: 5 | RNVC: 2
217P10: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-303-6178
Spanner Wrench

143036178
MUP5090: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-302-6698
Open End Wrench

143026698
RACD45: RNCC: 3 | RNVC: 2
RACD45: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-447-0697
Cle A Ergot

144470697
2-25747: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-14-572-3831
Open End Wrench

145723831
467.6: RNCC: 3 | RNVC: 2

29 Jun 2012

5120-14-415-9290
Socket Wrench Socket

144159290
853-100-240-0: RNCC: 3 | RNVC: 2

26 May 1987

5120-14-466-5855
Seal Inserter And Remover

144665855
8812173000: RNCC: 3 | RNVC: 2
85-695-0720: RNCC: 6 | RNVC: 9

17 Nov 1993

5120-14-401-6819

5120-14-401-4250

5120-14-446-8358
Socket Wrench Socket

144468358
K.7/8LA: RNCC: 3 | RNVC: 2
3148510304052: RNCC: 5 | RNVC: 2
K7-8LA: RNCC: 5 | RNVC: 2
0030405: RNCC: 5 | RNVC: 9

17 Apr 1991

5120-14-513-7386
Flat Tip Screwdriver

145137386
ENFD6560-1-2X6-5X125: RNCC: 3 | RNVC: 2

9 Apr 1999

5120-14-222-9018

5120-14-573-6537
Spanner Wrench

145736537
23REDN/LN324/017/F6-DN80: RNCC: 3 | RNVC: 2
LN324/017/F6-DN80: RNCC: 5 | RNVC: 2

29 Oct 2012

5120-14-303-5878

5120-14-391-2601

5120-14-239-8852

5120-14-253-8803
Cle Pour Bague Avan

142538803
PA166-1M933-1P19: RNCC: 3 | RNVC: 9

1 Jan 1968

5120-14-520-4891
Rallonge A Ergots

145204891
2P84446-00: RNCC: 3 | RNVC: 2

17 May 2000

5120-14-430-1075
Spanner Wrench

144301075
6232-54674: RNCC: 3 | RNVC: 2

1 Mar 1989

5120-14-514-0212
Open End Wrench

145140212
ENFD29159-38X40: RNCC: 3 | RNVC: 2

22 Apr 1999

5120-14-386-8232
Manual Impact Wrench

143868232
SWENCH1000: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-554-5253
Bearing And Bushing Inserter And Remover

145545253
6501LOB: RNCC: 3 | RNVC: 2
6501LOB100: RNCC: 5 | RNVC: 9

17 Jul 2007

5120-14-370-3287
Mechanical Puller Attachment

143703287
5000269165: RNCC: 3 | RNVC: 2
5000269165: RNCC: 5 | RNVC: 9

18 May 1981

5120-14-507-3942
Socket Head Screw Key

145073942
47217150: RNCC: 3 | RNVC: 2

1 Jul 1998

5120-14-532-2547
Spanner Wrench

145322547
257043220: RNCC: 3 | RNVC: 2
704322: RNCC: 3 | RNVC: 2

23 Oct 2002

5120-14-442-2407
Spanner Wrench

144422407
M46550: RNCC: 3 | RNVC: 2

3 Oct 1990

5120-14-562-8524
Stake Remover

145628524
64565C1: RNCC: 3 | RNVC: 2

27 Nov 2009

5120-14-302-6083
A Fourche Cle

5120-14-490-6840
Drill

144906840
240 D 00700 000: RNCC: 3 | RNVC: 2
F300 0T 000 0944: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-490-6906
Bit

144906906
241 B 00647 050: RNCC: 3 | RNVC: 2
F300 0T 000 1027: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-421-6322
Appareil De Demonta

144216322
216913: RNCC: 3 | RNVC: 2

20 Jan 1988

5120-14-490-8820
Alene

144908820
4066 214 320 200: RNCC: 3 | RNVC: 2
F300 0T 000 5092: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-490-8809
Alene

144908809
4066 214 110 600: RNCC: 3 | RNVC: 2
F300 0T 000 5081: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-291-7993
Manche De Cle

142917993
02640012100: RNCC: 3 | RNVC: 2
026400121: RNCC: 5 | RNVC: 2
102526: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-319-7248

5120-14-427-7610
Spanner Wrench

144277610
NO PRIMARY REF14-427-7610: RNCC: 3 | RNVC: 2
E0949616: RNCC: 5 | RNVC: 9

9 Nov 1988

5120-14-265-6101
Brosse A Poignee

142656101
NO PRIMARY REF14-265-6101: RNCC: 3 | RNVC: 2
MLE1937M213: RNCC: 5 | RNVC: 9

1 Jan 1970

5120-14-280-8810
Cle Carree

142808810
PA356-2M232P11: RNCC: 3 | RNVC: 2
PA356-2M232P11: RNCC: 3 | RNVC: 9

1 Jan 1971

5120-14-514-0152
Open End Wrench

145140152
ENFD29159-26X27: RNCC: 3 | RNVC: 2

22 Apr 1999

5120-14-304-6492
Spanner Wrench

143046492
7062RUF1-32Z3CN18-10: RNCC: 2 | RNVC: 2

1 Jan 1974

5120-14-403-3295

5120-14-459-0445
Agrafeuse Agrafes

144590445
G-43-F-14: RNCC: 3 | RNVC: 2
G43F14: RNCC: 3 | RNVC: 2
3272670279841: RNCC: 5 | RNVC: 2
3276270279841: RNCC: 5 | RNVC: 9
0279841: RNCC: 5 | RNVC: 9

17 Nov 1992

5120-14-300-4492

5120-14-225-8910

5120-14-346-3402

5120-14-391-9850
Pince Montage Depos

143919850
M11750: RNCC: 3 | RNVC: 2

21 Mar 1984

5120-14-490-9485
Tuyau

144909485
4280 284 000 019: RNCC: 3 | RNVC: 2
F300 0T 000 7229: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-440-5429
Cle Adaptateur

144405429
40269: RNCC: 3 | RNVC: 2
85-694-1101: RNCC: 6 | RNVC: 9

17 Jul 1990

5120-14-319-4074
Fixed Open End Wrench Set

143194074
NO PRIMARY REF14-319-4074: RNCC: 3 | RNVC: 2
11J20A: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-332-8870
Offset Screwdriver

143328870
50804: RNCC: 3 | RNVC: 2
50804: RNCC: 5 | RNVC: 2
6511-50804: RNCC: 5 | RNVC: 2

2 Jul 1975

5120-14-275-2589
Rallonge De Cle

142752589
MS654-008: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-333-3851

5120-14-460-0200
Open End Wrench

144600200
120003-SERT-7060: RNCC: 3 | RNVC: 2

7 Jan 1993

5120-14-341-6767

5120-14-247-9658
Cle A Oeil

142479658
RT20922: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-401-9141
Tap And Reamer Wrench

144019141
E66130 N1 1/2: RNCC: 2 | RNVC: 2

13 Jun 1985

5120-14-531-6603
Hand Blind Riveter

145316603
PNT 131: RNCC: 3 | RNVC: 2

11 Sep 2002

5120-14-451-1120
Bearing Staking Installation Tool

144511120
16741157: RNCC: 3 | RNVC: 2

30 Oct 1991

5120-14-418-5834
Etau A Rotule

144185834
7241A+7241C: RNCC: 3 | RNVC: 2

2 Sep 1987

5120-14-253-6005
Extracteur Special

142536005
129633-2: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-277-0274
Marteau A Inertie

142770274
521104: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-576-6159
Mechanical Puller S

145766159
8811053004: RNCC: 3 | RNVC: 2

1 Jul 2013

5120-14-291-7992
Manche De Cle

142917992
02640011700: RNCC: 3 | RNVC: 2
026400117: RNCC: 5 | RNVC: 2
102525: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-521-6414
Rallonge

145216414
118717: RNCC: 3 | RNVC: 2

30 Aug 2000

5120-14-578-1974
Socket Wrench

145781974
8815099764: RNCC: 3 | RNVC: 2

12 Nov 2013

5120-14-461-6914
Rail Rouleur

144616914
PL1DA002OR902003A: RNCC: 3 | RNVC: 2

22 Mar 1993

5120-14-281-2972
Cle De Maintien Amo

142812972
C46916: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-280-3276
Rondelle De Centrag

142803276
65MA403962: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-567-3965
Ratchet Wrench

145673965
888-564-500-1: RNCC: 3 | RNVC: 2

10 Mar 2011

5120-14-444-2723
Flat Tip Screwdriver

144442723
GS210-3X100: RNCC: 3 | RNVC: 2
1.70.3500: RNCC: 5 | RNVC: 2
GS210-03: RNCC: 5 | RNVC: 2

21 Dec 1990

5120-14-270-5247
Outil Dopercule

142705247
NO PRIMARY REF14-270-5247: RNCC: 3 | RNVC: 2
5592: RNCC: 5 | RNVC: 9

1 Jan 1970

5120-14-388-2671
Socket Wrench Crowfoot Attachment

143882671
854-100-194-0: RNCC: 3 | RNVC: 2

12 Oct 1983

5120-14-339-0378
Spanner Wrench

143390378
80900-270: RNCC: 3 | RNVC: 2
78576-158: RNCC: 5 | RNVC: 2
85-598-4681: RNCC: 6 | RNVC: 9

17 Dec 1976

5120-14-385-3133
Out Monta Faisceaux

143853133
360A93-3300-00: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-466-4065
Emmanchement Outil

144664065
MMG047-63: RNCC: 3 | RNVC: 2
MMG047-63: RNCC: 5 | RNVC: 2

3 Nov 1993

5120-14-273-8180

5120-14-281-2946
Faux Mors Cylindre

142812946
C46805: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-405-0082
Outil De Demontage

144050082
101712: RNCC: 3 | RNVC: 2

20 Nov 1985

5120-14-272-5739

5120-14-560-9965
Socket Wrench Socket

145609965
GSX.18: RNCC: 3 | RNVC: 2
27033: RNCC: 5 | RNVC: 2
3148510270333: RNCC: 5 | RNVC: 2

5 Jun 2009

5120-14-253-8801
Cle Speciale

142538801
PA166-1M933-1P16: RNCC: 3 | RNVC: 9

1 Jan 1968

5120-14-501-7899
Flat Tip Screwdriver

145017899
NO PRIMARY REF14-501-7899: RNCC: 3 | RNVC: 2
2 655 450: RNCC: 5 | RNVC: 9
300 104 023: RNCC: 5 | RNVC: 9
4065 200 000 648: RNCC: 5 | RNVC: 9
75120 357 7169: RNCC: 5 | RNVC: 9
F300 0T 000 5053: RNCC: 6 | RNVC: 9

10 Nov 1997

5120-14-464-9157
Sheet Metalworking Stake

144649157
851-930-692-0: RNCC: 3 | RNVC: 2

8 Sep 1993

5120-14-264-0600
Socket Head Screw Key

142640600
801W5-32: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-307-8815
Positionneur Fusee

143078815
330A98-3348-00: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-256-7184

5120-14-572-4057
Spanner Wrench

145724057
O111519: RNCC: 3 | RNVC: 2

3 Jul 2012

5120-14-280-9683

5120-14-244-4739

5120-14-444-9176
Brochage Outillage

144449176
0448402C00: RNCC: 3 | RNVC: 2

28 Jan 1991

5120-14-378-8114
Montage-Demon Outil

143788114
30MS153: RNCC: 3 | RNVC: 2

11 Aug 1982

5120-14-258-2442

5120-14-442-2411
Cle Maintien Noyau

144422411
PR46869: RNCC: 3 | RNVC: 2

3 Oct 1990

5120-14-315-1850
Outil Blocage Rotor

143151850
0-51813-3: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-471-9032
Electronic Component Inserter And Remover

144719032
R282868010: RNCC: 3 | RNVC: 2

23 Sep 1994

5120-14-503-4684
Electronic Component Inserter And Remover

145034684
39338143: RNCC: 3 | RNVC: 2

14 Jan 1998

5120-14-338-4755
Extracteur Crochet

143384755
PR47276-5: RNCC: 3 | RNVC: 2

6 Nov 1976

5120-14-452-0884
Spring Inserter And Remover

144520884
974723-02: RNCC: 3 | RNVC: 2
63-6-01EM3800-927124-02: RNCC: 5 | RNVC: 2
63-6-01EM3800-927124-02: RNCC: 5 | RNVC: 9
974723-02: RNCC: 5 | RNVC: 9

18 Dec 1991

5120-14-547-1039
Spring Inserter And Remover

145471039
888-489-000-2: RNCC: 3 | RNVC: 2

23 Sep 2005

5120-14-274-5179
Matrice Outil A Ser

142745179
48825: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-366-6977
Azimut Des Tete Cle

143666977
01-90900-042: RNCC: 3 | RNVC: 2
85-691-3891: RNCC: 6 | RNVC: 9

20 Nov 1980

5120-14-455-8900
Cle Alle

144558900
NO PRIMARY REF14-455-8900: RNCC: 3 | RNVC: 2
PN018: RNCC: 5 | RNVC: 9

11 Jun 1992

5120-14-262-0095
Cle Speciale

142620095
U250-00-01: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-367-9502
Electrical Contact Remover

143679502
282941: RNCC: 3 | RNVC: 2
85-691-3305: RNCC: 6 | RNVC: 9

19 Jan 1981

5120-14-524-1382
Flat Tip Screwdriver

145241382
AE-2X35: RNCC: 3 | RNVC: 2
AE2X35: RNCC: 5 | RNVC: 2

5 Mar 2001

5120-14-303-6430
Torque Wrench Adapter

143036430
D0-16: RNCC: 3 | RNVC: 2
D016: RNCC: 3 | RNVC: 2
3272670232990: RNCC: 5 | RNVC: 2
D016: RNCC: 5 | RNVC: 2
813201: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-374-0867
Socket Wrench Crowfoot Attachment

143740867
UHB303-43: RNCC: 3 | RNVC: 2

8 Dec 1981

5120-14-574-1976
Six Point Tip Screwdriver

145741976
AZX.30X175: RNCC: 3 | RNVC: 9

14 Dec 2012

5120-14-406-6557
Maintien Empreinte

144066557
853-200-818-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-427-1083
Centrage Mandrin

144271083
540978: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-425-9255
Mandrin Emmanchemen

144259255
600109: RNCC: 3 | RNVC: 2

28 Jul 1988

5120-14-429-2193
Spanner Wrench

144292193
MHE103-44: RNCC: 3 | RNVC: 2
MHE103-44: RNCC: 5 | RNVC: 2

11 Jan 1989

5120-14-370-3298
Tige Reglag Suspens

143703298
5000499666: RNCC: 3 | RNVC: 2
5000499666: RNCC: 5 | RNVC: 9

18 May 1981

5120-14-297-7689
Spanner Wrench

142977689
6800-2212: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-482-0397
Preformed Packing Inserter And Remover

144820397
199-18: RNCC: 3 | RNVC: 2
199-18: RNCC: 5 | RNVC: 2

15 Jun 1996

5120-14-441-2848
Spanner Wrench

144412848
94AM072: RNCC: 3 | RNVC: 2

22 Aug 1990

5120-14-517-6529
Socket Wrench Ratchet Attachment

145176529
9403L0S101: RNCC: 3 | RNVC: 2

5 Jan 2000

5120-14-471-5399
Flat Tip Screwdriver

144715399
ARH.1,6X15: RNCC: 3 | RNVC: 2
85-695-1133: RNCC: 6 | RNVC: 9

31 Aug 1994

5120-14-505-5470
Flat Tip Screwdriver

145055470
ENFD6513-A1-2X8X150X265: RNCC: 3 | RNVC: 2

24 Mar 1998

5120-14-226-3116
Entretoise Mobile E

142263116
60290-01-400M3: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-567-1221
Combination Box And Open End Wrench

145671221
440.27: RNCC: 3 | RNVC: 2
768141: RNCC: 5 | RNVC: 2
0768141: RNCC: 5 | RNVC: 2
3148517681415: RNCC: 5 | RNVC: 2

10 Feb 2011

5120-14-411-9183
Outillage Controle

144119183
27980050: RNCC: 3 | RNVC: 2

16 Sep 1986

5120-14-358-8561
Socket Head Screw Key

143588561
383-300-050: RNCC: 3 | RNVC: 2

7 Sep 1979

5120-14-343-6319
Mechanical Puller Attachment

143436319
330A93-3074-21: RNCC: 3 | RNVC: 2

16 Jun 1977

5120-14-502-6316
Spanner Wrench

145026316
611397760: RNCC: 3 | RNVC: 2

17 Dec 1997

5120-14-412-4660
Spanner Wrench

144124660
H117047: RNCC: 3 | RNVC: 2

15 Oct 1986

5120-14-252-3039
Spanner Wrench

142523039
NO PRIMARY REF14-252-3039: RNCC: 3 | RNVC: 2
154274: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-466-8906
A Fourch Tournevis

144668906
221TV0001: RNCC: 3 | RNVC: 2

8 Dec 1993

5120-14-518-7212
Spanner Wrench

145187212
J47949: RNCC: 3 | RNVC: 2

16 Feb 2000

5120-14-540-1533
Leveling-Support Jack

145401533
F00180069: RNCC: 3 | RNVC: 2
F00180069: RNCC: 5 | RNVC: 2

11 Mar 2004

5120-14-404-4508
Bati De Montage

144044508
NO PRIMARY REF14-404-4508: RNCC: 3 | RNVC: 2
093200-78: RNCC: 5 | RNVC: 9

30 Oct 1985

5120-14-479-4275
De Pose Mandrin

144794275
H46676-100: RNCC: 3 | RNVC: 2

10 Jan 1996

5120-14-513-4116
Socket Head Screw Key

145134116
NO PRIMARY REF14-513-4116: RNCC: 3 | RNVC: 2
NNP 5120860464857: RNCC: 5 | RNVC: 9

17 Mar 1999

5120-14-361-6801
Injecteur Cle Fixat

143616801
5000261063: RNCC: 3 | RNVC: 2
5000261063: RNCC: 5 | RNVC: 9

20 Feb 1980

5120-14-472-3643
Mechanical Puller Attachment

144723643
239490Q: RNCC: 3 | RNVC: 2

19 Oct 1994

5120-14-505-9309
Bearing And Bushing Inserter And Remover

145059309
K117120D: RNCC: 3 | RNVC: 2

30 Mar 1998

5120-14-427-0927
Socket Wrench Socket

144270927
540316: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-393-7014
Spanner Wrench

143937014
H17: RNCC: 3 | RNVC: 2
SKFH17: RNCC: 5 | RNVC: 9

7 Jun 1984

5120-14-488-5559
Cross Tip Screwdriver

144885559
ATHH.D1: RNCC: 3 | RNVC: 2
0011700: RNCC: 5 | RNVC: 2
3148510117003: RNCC: 5 | RNVC: 2
ATHHD1: RNCC: 5 | RNVC: 2

21 May 1997

5120-14-465-4228
Socket Wrench Adapter

144654228
0043370: RNCC: 3 | RNVC: 2
NS.238: RNCC: 5 | RNVC: 2
NS238: RNCC: 5 | RNVC: 2

29 Sep 1993

5120-14-259-2634
Spanner Wrench

142592634
0U12775: RNCC: 3 | RNVC: 2

1 Jan 1969

5120-14-319-4916

5120-14-375-8071
Spanner Wrench

143758071
402-026-000024: RNCC: 3 | RNVC: 2
91376355: RNCC: 5 | RNVC: 2
402-026-000024: RNCC: 5 | RNVC: 9
402-026-000024: RNCC: 5 | RNVC: 9
402-026-000024: RNCC: 5 | RNVC: 9

30 Mar 1982

5120-14-393-8792
Poussoir Outil

143938792
NO PRIMARY REF14-393-8792: RNCC: 3 | RNVC: 2
OU140235: RNCC: 5 | RNVC: 9

23 Jun 1984

5120-14-257-2910
Cle Decrou De Dome

142572910
FH152-913: RNCC: 3 | RNVC: 2

1 Jan 1969

5120-14-566-7138
Mechanical Puller Body

145667138
MDN92D201: RNCC: 3 | RNVC: 2

9 Dec 2010

5120-14-362-8899
Flat Tip Screwdriver

143628899
ARB.6,5X40: RNCC: 3 | RNVC: 2
3148510107400: RNCC: 5 | RNVC: 2
ARB6-5X40: RNCC: 5 | RNVC: 2
BJM002256: RNCC: 5 | RNVC: 2
91345901: RNCC: 5 | RNVC: 2
0010740: RNCC: 5 | RNVC: 9

19 Mar 1980

5120-14-321-1528
Open End Wrench

143211528
NO PRIMARY REF14-321-1528: RNCC: 3 | RNVC: 2
13 5-16X7-16: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-572-8446
Socket Wrench Socket

145728446
320012: RNCC: 3 | RNVC: 2
7612206014755: RNCC: 5 | RNVC: 2

13 Aug 2012

5120-14-410-0147
Reglage Outillage

144100147
8813222000: RNCC: 3 | RNVC: 2

4 Jun 1986

5120-14-400-2095

5120-14-491-0169
Cle

144910169
4602 007 200 296: RNCC: 3 | RNVC: 2
F300 0T 001 0957: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-376-2284

5120-14-461-6883
Etrier Talon

144616883
PL1DA002OR901022A: RNCC: 3 | RNVC: 2

22 Mar 1993

5120-14-564-5972
Mechanical Puller Forcing Screw

145645972
39511973: RNCC: 3 | RNVC: 2

11 May 2010

5120-14-384-4528
Centreur Joint Rota

143844528
0121105: RNCC: 3 | RNVC: 2

4 May 1983

5120-14-572-3598
Combination Box And Open End Wrench

145723598
440.1': RNCC: 3 | RNVC: 2
3148517683860: RNCC: 5 | RNVC: 2
768386: RNCC: 5 | RNVC: 2

27 Jun 2012

5120-14-576-6094
Mechanical Puller S

145766094
8817597002: RNCC: 3 | RNVC: 2

1 Jul 2013

5120-14-503-3520
Screwdriver Bit

145033520
8007934E00: RNCC: 3 | RNVC: 2

13 Jan 1998

5120-14-251-9444
Open End Wrench

142519444
PA166-1M933-1P14: RNCC: 3 | RNVC: 9

1 Jan 1968

5120-14-529-8528
Detent Handling Tool

145298528
7107-1460-051: RNCC: 3 | RNVC: 2
YM1101A00: RNCC: 5 | RNVC: 2

17 Apr 2002

5120-14-237-9512

5120-14-483-8563
Bearing And Bushing Remover

144838563
0-30221-17: RNCC: 3 | RNVC: 2

5 Oct 1996

5120-14-425-6891
Bearing And Bushing Inserter And Remover

144256891
8813426000: RNCC: 3 | RNVC: 2

21 Jul 1988

5120-14-318-6441
Spanner Wrench

143186441
C46831: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-434-1195
Spanner Wrench

144341195
MNO2011138: RNCC: 3 | RNVC: 2
2011138: RNCC: 5 | RNVC: 1

6 Sep 1989

5120-14-329-1036
Socket Wrench Spanner Attachment Set

143291036
117.E3: RNCC: 3 | RNVC: 2
117E3: RNCC: 5 | RNVC: 2
3148511340400: RNCC: 5 | RNVC: 2
190216: RNCC: 5 | RNVC: 2
91352498: RNCC: 5 | RNVC: 2
0134040: RNCC: 5 | RNVC: 9
117.E3: RNCC: 5 | RNVC: 9

2 Jul 1975

5120-14-576-3368
Mechanical Puller S

145763368
8819480004: RNCC: 3 | RNVC: 2

12 Jun 2013

5120-14-358-8435
Spanner Wrench

143588435
502677: RNCC: 3 | RNVC: 2

7 Sep 1979

5120-14-386-6810
Socket Wrench Socket

143866810
853-100-085-0: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-315-1839
Mechanical Puller Attachment

143151839
0-30070-15: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-461-3330
Bague Demontage

144613330
31102: RNCC: 3 | RNVC: 2

8 Mar 1993

5120-14-232-1739

5120-14-274-9225

5120-14-451-4519
Metallique Poincon

144514519
851-913-096-0: RNCC: 3 | RNVC: 2

21 Nov 1991

5120-14-278-9052
Cle Speciale

142789052
262-10-95100-01: RNCC: 3 | RNVC: 2
NA32-104: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-451-0448
Support Attelage

144510448
02240902400: RNCC: 3 | RNVC: 2
016185-01: RNCC: 5 | RNVC: 2
M827890: RNCC: 5 | RNVC: 2

28 Oct 1991

5120-14-565-0362
Door Breacher Shoe

145650362
VE70/EU-014: RNCC: 3 | RNVC: 2

1 Jul 2010

5120-14-459-6464
Cle Speciale

144596464
312-01643-001-W26H: RNCC: 3 | RNVC: 2

10 Dec 1992

5120-14-215-9627
Cle Etoilee Hexagon

142159627
773-411-003F4-34X5SURPLATS: RNCC: 3 | RNVC: 2
773-411-003F4-34X5SURPLATS: RNCC: 5 | RNVC: 9
773-411-003FF4-54X5SURPLATS: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-257-2896
Barre De Serrage

142572896
PC3498: RNCC: 3 | RNVC: 2
FH137-906: RNCC: 3 | RNVC: 2
99-710-7718: RNCC: 6 | RNVC: 9

1 Jan 1969

5120-14-545-5280
Electrical Connector Inserter

145455280
187845: RNCC: 3 | RNVC: 2

18 Apr 2005

5120-14-362-8898
Craftsman's Tweezers

143628898
148: RNCC: 3 | RNVC: 2
3148511383001: RNCC: 5 | RNVC: 2
0138300: RNCC: 5 | RNVC: 9
138300148: RNCC: 5 | RNVC: 9

19 Mar 1980

5120-14-538-3662
Spanner Wrench

145383662
NGM0010036234006: RNCC: 2 | RNVC: 2

9 Dec 2003

5120-14-433-1497
Cle Embout

144331497
215256: RNCC: 3 | RNVC: 2

11 Jul 1989

5120-14-548-4765
Socket Wrench Socket

145484765
S.32HLA: RNCC: 3 | RNVC: 2
00.49.49.02: RNCC: 5 | RNVC: 2

19 Jan 2006

5120-14-457-2024
Valve Tappet Adjusting Tool

144572024
P.80: RNCC: 3 | RNVC: 2
3148510494807: RNCC: 5 | RNVC: 2
0049480: RNCC: 5 | RNVC: 9

13 Aug 1992

5120-14-576-8978
Aligning Punch

145768978
S48670-1: RNCC: 3 | RNVC: 2

19 Jul 2013

5120-14-314-4899
Bloc De Matage

143144899
M2D61022: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-301-9194

5120-14-490-8995
Porte P

144908995
4071 111 611 611: RNCC: 3 | RNVC: 2
F300 0T 000 5292: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-274-1920
Pince A Cintrer A L

142741920
364FH1-2: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-456-3622
Cric Appui

144563622
R21889: RNCC: 3 | RNVC: 2

30 Jun 1992

5120-14-571-7373
Screwdriver Bit

145717373
E-111-F4: RNCC: 3 | RNVC: 2

26 Apr 2012

5120-14-451-8150
Hand Lead Seal Press

144518150
N00: RNCC: 3 | RNVC: 2
91560217: RNCC: 5 | RNVC: 2

4 Dec 1991

5120-14-460-7072
Preformed Packing Inserter And Remover

144607072
45215261: RNCC: 3 | RNVC: 2
45215261: RNCC: 5 | RNVC: 9

4 Feb 1993

5120-14-438-1115
Handling Tool Arm

144381115
16-080-077: RNCC: 3 | RNVC: 2

7 Mar 1990

5120-14-300-9663
Bearing And Bushing Inserter

143009663
341A93-3516-00: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-249-0628
Socket Wrench Screwdriver Attachment

142490628
JP2: RNCC: 3 | RNVC: 2
3148515058202: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-249-9688
Spanner Wrench

142499688
H90P1018: RNCC: 3 | RNVC: 2
530509: RNCC: 5 | RNVC: 2
H90L1027: RNCC: 5 | RNVC: 2
H90P1018: RNCC: 5 | RNVC: 2
H90L1027: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-328-6719
Screwdriver Bit

143286719
RE4: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-317-7885

5120-14-528-2384
Outillage Demontage

145282384
26145906934: RNCC: 3 | RNVC: 2

15 Jan 2002

5120-14-536-5289
Combination Box And Open End Wrench

145365289
40R.5/8: RNCC: 3 | RNVC: 2
3148511012031: RNCC: 5 | RNVC: 2

28 Aug 2003

5120-14-410-6697
Outil Ecrou A Epano

144106697
20325409: RNCC: 3 | RNVC: 2
20325409: RNCC: 5 | RNVC: 9

9 Jul 1986

5120-14-281-2973
Douille A Ergots At

142812973
C46917: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-243-1494
Tournevis A Lames M

142431494
AMK: RNCC: 3 | RNVC: 2
3599035: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-359-9449
Gaz Lampe A Souder

143599449
9617: RNCC: 3 | RNVC: 2
S0UD0GAZC200: RNCC: 3 | RNVC: 2

15 Oct 1979

5120-14-343-1866
Cle A Ergot Douille

143431866
199930: RNCC: 3 | RNVC: 2

16 Jun 1977

5120-14-423-2301
Axe Cle Dyn

144232301
0747152: RNCC: 3 | RNVC: 2
SP.1735 D-2: RNCC: 5 | RNVC: 2
SP1735D-2: RNCC: 5 | RNVC: 2

13 Apr 1988

5120-14-478-3306
Electrical Contact Inserter And Remover

144783306
0894366X00: RNCC: 3 | RNVC: 2

25 Oct 1995

5120-14-281-1907
Spanner Wrench

142811907
4642: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-387-5412
Brad Awl

143875412
6V: RNCC: 3 | RNVC: 2

15 Sep 1983

5120-14-268-0065
Spanner Wrench

142680065
DE48F2: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-396-8287
Spanner Wrench

143968287
NO PRIMARY REF14-396-8287: RNCC: 3 | RNVC: 2
L121AAV300M: RNCC: 5 | RNVC: 9
85-692-6228: RNCC: 6 | RNVC: 9

27 Nov 1984

5120-14-439-7907
Seal Inserter And Remover

144397907
16849779: RNCC: 3 | RNVC: 2
16849779: RNCC: 5 | RNVC: 9

23 May 1990

5120-14-463-5502
Socket Head Screw Key

144635502
3125775: RNCC: 3 | RNVC: 2
3125775: RNCC: 5 | RNVC: 2

17 Jun 1993

5120-14-333-5390
Spanner Wrench

143335390
45402: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-314-8176
Electrical Contact Inserter

143148176
674: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-373-4919
Socket Wrench Socket

143734919
216047: RNCC: 3 | RNVC: 2

21 Oct 1981

5120-14-472-3641
Mechanical Puller Attachment

144723641
239485K: RNCC: 3 | RNVC: 2

19 Oct 1994

5120-14-375-2539
Retouche Piston Lot

143752539
73-115-029: RNCC: 3 | RNVC: 2

26 Feb 1982

5120-14-428-4919
De Montage Obus

144284919
46AM057-00-0016: RNCC: 3 | RNVC: 2

8 Dec 1988

5120-14-395-0271
Emmanche Join Outil

143950271
853-200-553-0: RNCC: 3 | RNVC: 2

2 Oct 1984

5120-14-241-1637
Matrice Montee Conn

142411637
8459-123: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-217-2661

5120-14-220-8409

5120-14-391-4249

5120-14-333-3876
Tendeur Demi Carter

143333876
0070-102: RNCC: 3 | RNVC: 2
0070-102: RNCC: 5 | RNVC: 2
1102: RNCC: 5 | RNVC: 2

2 Jul 1975

5120-14-371-9719
Adapt Pist Pal Cle

143719719
8812040002: RNCC: 3 | RNVC: 2

5 Aug 1981

5120-14-442-2418
Face Spanner Wrench Socket

144422418
PR46883: RNCC: 3 | RNVC: 2

3 Oct 1990

5120-14-528-6845
Expansion Shield Setting Tool

145286845
139460: RNCC: 3 | RNVC: 2

6 Feb 2002

5120-14-042-0768
Spanner Wrench

140420768
79065836: RNCC: 3 | RNVC: 2
79065836: RNCC: 5 | RNVC: 9

17 Dec 1976

5120-14-371-9914
Controle Coupe Segm

143719914
25545932000: RNCC: 3 | RNVC: 2
255459320: RNCC: 5 | RNVC: 9

5 Aug 1981

5120-14-348-8380
Bague De Retreint

143488380
D47707: RNCC: 3 | RNVC: 2

19 Apr 1978

5120-14-387-1652
Reglage Outillage

143871652
098034: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-506-7662
De Montage Outil

145067662
M13390: RNCC: 3 | RNVC: 2

14 May 1998

5120-14-313-5443
Extracteur De Roule

143135443
53MA401819: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-224-3075

5120-14-315-1854
Outil De Centrage

143151854
0-51940: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-290-5954

5120-14-334-8055

5120-14-548-4365
Bearing And Bushing Inserter And Remover

145484365
U.49P6: RNCC: 3 | RNVC: 2

17 Jan 2006

5120-14-393-0291
Combination Box And Open End Wrench

143930291
41.6: RNCC: 3 | RNVC: 2
3148511013502: RNCC: 5 | RNVC: 2
41-6: RNCC: 5 | RNVC: 2
0101350: RNCC: 5 | RNVC: 9

12 Apr 1984

5120-14-331-5607
Screwdriver Bit

143315607
AAL.4: RNCC: 3 | RNVC: 2
3148510018409: RNCC: 5 | RNVC: 2
AAL4: RNCC: 5 | RNVC: 2
0001840: RNCC: 5 | RNVC: 9

2 Jul 1975

5120-14-416-3213
Swivel Knob Jeweler's Screwdriver Set

144163213
T20: RNCC: 3 | RNVC: 2

3 Jun 1987

5120-14-318-8093
Mandrin Emmanc Roul

143188093
C60000: RNCC: 3 | RNVC: 2
100925: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-530-7132
Solid Center Punch

145307132
160510: RNCC: 3 | RNVC: 2
255.6: RNCC: 5 | RNVC: 2
3148511605103: RNCC: 5 | RNVC: 2

3 Jul 2002

5120-14-381-5981

5120-14-272-3737

5120-14-232-9179
Support Equipement

142329179
58922: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-412-9873
Cle De Verrouillage

144129873
20196520: RNCC: 3 | RNVC: 2
20196520: RNCC: 5 | RNVC: 9

5 Nov 1986

5120-14-423-2316
Vernier Cle Dyn

144232316
0747179: RNCC: 3 | RNVC: 2
SP.1735 D-9: RNCC: 5 | RNVC: 2
SP1735D-9: RNCC: 5 | RNVC: 2

14 Apr 1988

5120-14-249-3719
Cle Speciale

142493719
NO PRIMARY REF14-249-3719: RNCC: 3 | RNVC: 2
MA2364: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-378-8450
Controle Outillage

143788450
UJK232-49: RNCC: 3 | RNVC: 2
UJK232-49: RNCC: 5 | RNVC: 2

11 Aug 1982

5120-14-272-3726

5120-14-437-4284
Retaining Ring Installation Tool

144374284
16380763: RNCC: 3 | RNVC: 2
16380763: RNCC: 5 | RNVC: 9

31 Jan 1990

5120-14-470-6200
Spanner Wrench

144706200
1074726N00: RNCC: 3 | RNVC: 2

29 Jun 1994

5120-14-368-7147
Sheet Metalworking Dolly Block

143687147
873: RNCC: 3 | RNVC: 2
2695 470 19: RNCC: 5 | RNVC: 2
3148512098409: RNCC: 5 | RNVC: 2
0209840: RNCC: 5 | RNVC: 9

10 Mar 1981

5120-14-245-8022

5120-14-464-4933
Evasage Mandrin

144644933
851-930-346-0: RNCC: 3 | RNVC: 2

4 Aug 1993

5120-14-410-0624
Torque Wrench Adapter

144100624
853-100-216-0: RNCC: 3 | RNVC: 2

4 Jun 1986

5120-14-313-7270
Faux Mors

143137270
C47039: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-548-5502
Socket Wrench Socket

145485502
SJ.8H: RNCC: 3 | RNVC: 2

26 Jan 2006

5120-14-460-7054
Bearing And Bushing Inserter And Remover

144607054
45057898: RNCC: 3 | RNVC: 2
45057898: RNCC: 5 | RNVC: 9

4 Feb 1993

5120-14-507-6109
Screwdriver Bit

145076109
ENH.310: RNCC: 3 | RNVC: 2
0023895: RNCC: 5 | RNVC: 2

29 Jul 1998

5120-14-231-8825
Cle A Ergots Specia

142318825
PR46994: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-491-3811
Cle D A

144913811
1042: RNCC: 3 | RNVC: 2
F300 0T 002 6120: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-576-2832
Mechanical Puller S

145762832
8810480006: RNCC: 3 | RNVC: 2

11 Jun 2013

5120-14-435-0488
Screwdriver Bit

144350488
0000842: RNCC: 3 | RNVC: 2
A-200-PA0: RNCC: 5 | RNVC: 2

17 Oct 1989

5120-14-527-9591
Socket Wrench Handle

145279591
005SAD99IND.B: RNCC: 3 | RNVC: 2

5 Dec 2001

5120-14-507-0305
Torque Wrench Adapter Set

145070305
K.300-2: RNCC: 3 | RNVC: 2
3148515067600: RNCC: 5 | RNVC: 2

3 Jun 1998

5120-14-220-0291
Open End Wrench

142200291
3000118: RNCC: 3 | RNVC: 2
VIR3000118: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-297-6193
Spanner Wrench

142976193
1-1038-02-26: RNCC: 3 | RNVC: 9
1-1038-02-26: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-490-8736
Cle

144908736
4065 030 000 473: RNCC: 3 | RNVC: 2
F300 0T 000 4982: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-491-9180
Cle A Lame

144919180
2806686: RNCC: 3 | RNVC: 2
F300 0T 006 0773: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-301-4118
Open End Wrench

143014118
69-90: RNCC: 3 | RNVC: 2
3272670285132: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-505-9354
Bearing And Bushing Inserter And Remover

145059354
K117120G: RNCC: 3 | RNVC: 2

30 Mar 1998

5120-14-250-0088
Spanner Wrench

142500088
B02210: RNCC: 3 | RNVC: 2
0000330498: RNCC: 5 | RNVC: 2
0000330498: RNCC: 5 | RNVC: 9
330498: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-395-7164

5120-14-213-3791
Cle Ecrou Butee

142133791
NO PRIMARY REF14-213-3791: RNCC: 3 | RNVC: 2
1-1038-02-41: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-316-9166
Mechanical Puller Adapter

143169166
0761960: RNCC: 3 | RNVC: 2
EMB0UTU51-32: RNCC: 5 | RNVC: 2
U.51B5-8: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-239-6367

5120-14-569-9061
Socket Wrench Extension

145699061
19327: RNCC: 3 | RNVC: 2

27 Oct 2011

5120-14-317-9606
Magnetic Retrieving Tool

143179606
827.1: RNCC: 3 | RNVC: 2
3148512062509: RNCC: 5 | RNVC: 2
827-1: RNCC: 5 | RNVC: 2
0189215R00: RNCC: 5 | RNVC: 2
0206250: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-468-9827
Seal Inserter And Remover

144689827
40N108313-2: RNCC: 3 | RNVC: 2

30 Mar 1994

5120-14-471-6949
Screw Thread Insert Extractor

144716949
820NM-2: RNCC: 3 | RNVC: 2

8 Sep 1994

5120-14-522-2915
Slip Joint Pliers

145222915
M19070: RNCC: 3 | RNVC: 2

19 Oct 2000

5120-14-200-4160

5120-14-245-1966
Presse A Roulements

142451966
MV30B: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-277-0277
Marteau A Inertie

142770277
521224: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-232-2230
Blacksmith's Punch

142322230
M0B12-25ECR0ND: RNCC: 3 | RNVC: 2
3833-25EMMANCHE: RNCC: 3 | RNVC: 9

1 Jan 1967

5120-14-532-3440
Mechanical Puller Adapter

145323440
899753-0001: RNCC: 3 | RNVC: 2

30 Oct 2002

5120-14-410-0623
Socket Wrench Crowfoot Attachment

144100623
853-100-214-0: RNCC: 3 | RNVC: 2

4 Jun 1986

5120-14-321-8077
Bearing And Bushing Inserter And Remover

143218077
3160S95-33-127: RNCC: 3 | RNVC: 2
85-689-0957: RNCC: 6 | RNVC: 9

1 Jan 1975

5120-14-445-7030
Cle Plate Simple

144457030
E74-301-75: RNCC: 2 | RNVC: 2
99-250-010752: RNCC: 3 | RNVC: 2

22 Feb 1991

5120-14-309-6626
Positionneur Sertis

143096626
L16-3191-9: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-253-6242
Spanner Wrench

142536242
0227-78: RNCC: 3 | RNVC: 2
RA227: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-458-3088
Spring Inserter And Remover

144583088
45056111: RNCC: 3 | RNVC: 2
45056111: RNCC: 5 | RNVC: 9

15 Oct 1992

5120-14-402-9717
Detent Handling Tool

144029717
045U11-572791X: RNCC: 3 | RNVC: 2

25 Jul 1985

5120-14-526-9738
Socket Head Screw Key

145269738
10651070: RNCC: 3 | RNVC: 2

19 Sep 2001

5120-14-326-3710
Spanner Wrench

143263710
3924514: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-409-7107
Meule Outil

144097107
854-600-055-6: RNCC: 3 | RNVC: 2

28 May 1986

5120-14-392-0864
Torque Wrench Adapter

143920864
853-100-096-0: RNCC: 3 | RNVC: 2

21 Mar 1984

5120-14-380-6756
Socket Wrench Handle Bar

143806756
99250500071: RNCC: 3 | RNVC: 2
59539805: RNCC: 5 | RNVC: 2
99-250-50-007-1: RNCC: 5 | RNVC: 2

29 Nov 1982

5120-14-509-0421
Socket Head Screw Key

145090421
82H.50: RNCC: 3 | RNVC: 2
9 920 001 002: RNCC: 3 | RNVC: 2
9.920.001.002: RNCC: 5 | RNVC: 2
82H-50: RNCC: 5 | RNVC: 9
82H50: RNCC: 5 | RNVC: 9
9 920 001 002: RNCC: 5 | RNVC: 9

16 Oct 1998

5120-14-570-0468
Socket Head Screw Key Set

145700468
16161-0100: RNCC: 3 | RNVC: 2
2 0196-202: RNCC: 5 | RNVC: 2
1479TX1: RNCC: 5 | RNVC: 2

15 Nov 2011

5120-14-530-2081
Socket Head Screw Key

145302081
83H.1/16: RNCC: 3 | RNVC: 2
3148511244012: RNCC: 5 | RNVC: 2

22 May 2002

5120-14-232-9947
Matrice De Sertissa

142329947
45238-2: RNCC: 3 | RNVC: 2
45238-3: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-422-9322
Etancheit Outillage

144229322
0373-OU-30802: RNCC: 3 | RNVC: 2
0373-OU30802: RNCC: 5 | RNVC: 2
0373-0U30802: RNCC: 5 | RNVC: 2

24 Mar 1988

5120-14-561-7693
Flat Tip Screwdriver

145617693
AN3X75: RNCC: 3 | RNVC: 2
3148517729414: RNCC: 5 | RNVC: 2

4 Sep 2009

5120-14-490-8874
Degorge

144908874
4067 130 000 366: RNCC: 3 | RNVC: 2
F300 0T 000 5146: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-566-5713
Bushing Driver Set

145665713
99360499: RNCC: 3 | RNVC: 2

25 Nov 2010

5120-14-234-3676
Appareil Montage Co

142343676
202407: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-516-5313
Open End Wrench

145165313
20.7/8: RNCC: 3 | RNVC: 2

29 Sep 1999

5120-14-536-8025
Hand Terminal Crimping Tool

145368025
58583-1: RNCC: 3 | RNVC: 2
58583-1: RNCC: 5 | RNVC: 2

17 Sep 2003

5120-14-552-7609
Flat Tip And Cross Tip Screwdriver Set

145527609
AJCZ.3: RNCC: 3 | RNVC: 2
AJCZ.3: RNCC: 5 | RNVC: 2
3148516402516: RNCC: 5 | RNVC: 2

30 Jan 2007

5120-14-370-9694
Socket Head Screw Key

143709694
21027-7: RNCC: 3 | RNVC: 2

5 Jun 1981

5120-14-352-7178
Connex Deroul Outil

143527178
633836: RNCC: 3 | RNVC: 2

14 Nov 1978

5120-14-368-4619

5120-14-214-2827
Cle Mise En Place E

142142827
9970-115-237: RNCC: 3 | RNVC: 2
9970-115-237-00: RNCC: 5 | RNVC: 2

1 Jan 1965

5120-14-212-9149
Cle Speciale Pour E

142129149
9970-115-010: RNCC: 3 | RNVC: 2
171-152: RNCC: 5 | RNVC: 2
9970-115-010-01: RNCC: 5 | RNVC: 2

1 Jan 1964

5120-14-462-9677
Hand Blind Riveter

144629677
60-002-005: RNCC: 3 | RNVC: 2
0949 100 11: RNCC: 5 | RNVC: 2

12 May 1993

5120-14-514-1237
Six Point Tip Screwdriver

145141237
ENFD6566-2-5X14X300: RNCC: 3 | RNVC: 2

27 Apr 1999

5120-14-476-3264
Socket Wrench Socket

144763264
S.16LA: RNCC: 3 | RNVC: 2
0055345: RNCC: 5 | RNVC: 2
3148510553450: RNCC: 5 | RNVC: 2
S16LA: RNCC: 5 | RNVC: 2
235-4264: RNCC: 5 | RNVC: 2
FACOMS.16LA: RNCC: 5 | RNVC: 9

7 Jun 1995

5120-14-430-1077
Spanner Wrench

144301077
6232-58465: RNCC: 3 | RNVC: 2

1 Mar 1989

5120-14-505-5466
Flat Tip Screwdriver

145055466
ENFD6513-A0-8X4X100X185: RNCC: 3 | RNVC: 2

24 Mar 1998

Load More Results