What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.

A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Blacksmith's Punch?

A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Mechanical Finger?

A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.

A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Screwdriver And Wrench Assembly?

A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Stakeholder Bench Plate?

A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.

What is a Drill Drift?

A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.

A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Digging Bar?

A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

What is a Valve Spring Lifter?

A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.

What is a Fuse Puller?

A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.

Hand Tools, Nonedged, Nonpowered - France (FR)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by France (FR) - NCB is 14

Page 100 of 110

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by France

51	20	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - France (FR)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 16 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Pipe Vise? 19 Items: A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.
What is a Hand Vise? 25 Items: A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.
What is a Hand Hydraulic Jack? 133 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 153 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 903 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 17 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
Swage,Bottom,Blacksmith's 10 Items
What is a Hand Tube Flaring Tool? 23 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Blacksmith's Punch? 12 Items: A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.
What is a Drain Plug Wrench? 45 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 57 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 16 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 3829 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
Flatter,Blacksmith's 18 Items
Swage,Top,Blacksmith's 12 Items
What is a Pipe Wrench? 110 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 149 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 53 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
Screwdriver,Offset 54 Items
What is a Screwdriver Bit? 707 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Mechanical Finger? 25 Items: A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.
What is a Socket Wrench Socket? 1803 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 1412 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 1641 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 52 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 565 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
Jack,Push-Pull,Screw 30 Items
What is a Hand Tube Bender? 54 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 1106 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 55 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pinch Bar? 19 Items: A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.
What is a Pry Bar? 17 Items: A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.
What is a Wrecking Bar? 15 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 273 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 413 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 32 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 295 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
Face,Hammer,Inserted 25 Items
What is a Hole Sheet Metal Holder? 37 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Screwdriver And Wrench Assembly? 11 Items: A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.
What is a Hand Rivet Set? 121 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Stakeholder Bench Plate? 22 Items: A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.
What is a Drill Drift? 32 Items: A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.
What is a Tack Claw? 15 Items: A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.
Mattock 28 Items
What is a Socket Wrench Handle Bar? 108 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Stake,Sheet Metalworking 50 Items
Riveter,Blind,Hand 76 Items
What is a Hand Shovel? 43 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 98 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 30 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
What is a Digging Bar? 20 Items: A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.
Block,Dolly,Sheet Metalworking 56 Items
What is a Piston Ring Compressor? 34 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Valve Spring Lifter? 29 Items: A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.
What is a Fuse Puller? 20 Items: A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.
What is a Hand Lead Seal Press? 18 Items: A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.
What is a Hand Beading Tool? 91 Items: A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.
What is a Hand Hammer? 502 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
Head,Hand Hammer 81 Items
What is a Lamp Extractor? 76 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Tube Packing Ring Installing Tool? 29 Items: A Tube Packing Ring Installing Tool (INSTALLING TOOL,TUBE PACKING RING) is an item designed to insert packing rings on tubes within tube sheets on condensers and similar heat exchangers. In operation, the packing rings are assembled on the loading pin mandrel and are then transferred from the mandrel on to the tube by means of a tubular sleeve which slides on the mandrel.
What is a Carpenters' Pincers? 18 Items: A Carpenters' Pincers (PINCERS,CARPENTERS') is a plierlike hand tool having two opposing jaws which may have hammerlike backs. One handle has a nail or tack pulling claw, the other is shaped to form a screwdriver. The tool may contain a wire cutter. See also NIPPERS, END CUTTING and PINCERS, FARRIERS'.
What is a Trowel? 33 Items: A Trowel is a tool used for bricklaying, concrete work, plastering, linoleum laying, and masonry work. Excludes CORNER TOOL, CONCRETE.
What is a Hand Abrasive Wheel Dresser? 12 Items: A Hand Abrasive Wheel Dresser (DRESSER,ABRASIVE WHEEL,HAND) is a tool designed to remove glaze from, dress, shape, sharpen, and true solid abrasive wheels. Excludes NIB, DIAMOND, WHEEL DRESSING.
What is a Lamp Cap Extractor? 32 Items: A Lamp Cap Extractor (EXTRACTOR,LAMP CAP) is a tool specifically designed to facilitate the removal of lamp caps from switchboards, panels or indicator lamps.
What is a Rivet Bucking Bar? 51 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 86 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 277 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Woven Cable Grip? 23 Items: A Woven Cable Grip (GRIP,CABLE,WOVEN) is a braided wire device designed to clutch a bare or insulated conductor, cable or wire rope, for holding taut or drawing through conduit.
What is a Screw Thread Insert Extractor? 19 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is an Electron Tube Extractor? 18 Items: An Electron Tube Extractor (EXTRACTOR,ELECTRON TUBE) is a hand tool designed to facilitate the removal of electron tubes from electronic equipment and to avoid burning the fingers. It may be used for installing tubes.
What is a Cross Tip Screwdriver? 362 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 21 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 11 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 37 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Tool Handle Wedge? 10 Items: A Tool Handle Wedge (WEDGE,TOOL HANDLE) is excludes WEDGE, WOOD.
What is a Marlinespike? 16 Items: A Marlinespike is a metal hand tool made in the shape of a tapered pin. One end is pointed and the opposite end may be headed. The body may contain an eye for a lanyard sling, or be grooved lengthwise. Excludes CABLE PICK and FID.
What is an Aligning Punch? 272 Items: An Aligning Punch (PUNCH,ALIGNING) is a round, square, hexagonal or octagonal bodied hand tool, having a round tapered section 6-1/2 inches (165.1 mm) or more in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, DRIFT and DRIFTPIN.
What is a Drift Punch? 25 Items: A Drift Punch (PUNCH,DRIFT) is a round, square, hexagonal, or octagonal bodied hand tool, having a round tapered section 4 to 6 inches (101.6 mm to 152.4 mm) inclusive in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, ALIGNING; and DRIFTPIN.
What is a Putty Knife? 36 Items: A Putty Knife (KNIFE,PUTTY) is a hand tool with a nonedged blade fixed to a handle for laying on and smoothing putty and the like.
What is a Socket Wrench Adapter-Extension? 40 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 30 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 184 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Socket Wrench Ratchet Attachment? 47 Items: A Socket Wrench Ratchet Attachment (RATCHET ATTACHMENT,SOCKET WRENCH) is a connection for socket wrenches and handles. Consists of a ratcheting mechanism with an internal drive on one end and an external drive on the opposite end of the same size. The item is designed to permit continuous rotation of the socket in one direction without removing the socket or handle and without a complete rotation of the handle.
What is a Wrench Extension Handle? 81 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Socket Wrench Crowfoot Attachment? 155 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 33 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 43 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 48 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 2394 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 372 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 300 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 661 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 32 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand-Operated Grommet And Eyelet Press? 12 Items: A Hand-Operated Grommet And Eyelet Press (PRESS,GROMMET AND EYELET,HAND-OPERATED) is a device which punches or pierces holes and in addition fastens or sets eyelets and grommets in cloth, paper and similar material. May be used for fastening or setting rivets, lacing hooks and snaps in cloth, paper and similar material. It is hand operated by lever or screw action. See also PUNCH, EYELET, PLIER TYPE and PRESS, GROMMET AND EYELET, FOOT OPERATED.
What is a Claw Bar? 19 Items: A Claw Bar (BAR,CLAW) is before using, refer to Reference Drawing Group AG.
What is a Shock Type Wheel Stud Nut Wrench? 11 Items: A Shock Type Wheel Stud Nut Wrench (WRENCH,WHEEL STUD NUT,SHOCK TYPE) is a manually operated item designed to remove wheel stud nuts. In operation the inner nut is turned by a socket attached to a shaft on which is a loose swinging weighted handle. The weighted handle may be swung quickly to provide an impact force against the socket to loosen the seized or jammed nuts. The outer nut is held stationary by a separate hexagonal holding wrench.
What is a Drift Pin Set? 30 Items: A Drift Pin Set is a group of DRIFTPIN having different characteristics.
What is a Tire Iron? 25 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 115 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Blacksmith's Vise? 14 Items: A Blacksmith's Vise (VISE,BLACKSMITH'S) is a clamping device consisting of a mounting plate, one stationary and one manual screw actuated jaw and a supporting member extending downward from the stationary jaw to the floor. Designed to be mounted on a bench, table or the like. May include pipe holding jaws.
What is a Machinist's Vise? 64 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Clamp Base Bench Vise? 10 Items: A Clamp Base Bench Vise (VISE,BENCH,CLAMP BASE) is a clamping device consisting of a base, one stationary and one manual screw actuated jaw, and one or more guide bars or rods. Designed with an integral clamp for attaching to a bench, table, or the like. Does not include pipe holding jaws.
What is a Fixed Open End Wrench Set? 86 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Nail Set? 11 Items: A Nail Set is a round knurled, square, hexagonal or octagonal bodied hand tool having a round tapered section terminating in a cupped point. It is designed to set brad head nails below the surface by striking it a hammerlike blow. See also PUNCH, DRIVE PIN.
What is a Socket Wrench Set? 202 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is an Open End Box Wrench Set? 10 Items: An Open End Box Wrench Set (WRENCH SET,OPEN END BOX) is a group of WRENCH, OPEN END BOX having different characteristics.
What is a Combination Box And Open End Wrench Set? 72 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Box Wrench Set? 36 Items: A Box Wrench Set (WRENCH SET,BOX) is a group of box wrenches having different characteristics. It may include a HANDLE, EXTENSION WRENCH. See also WRENCH SET, COMBINATION, BOX AND OPEN END.
What is a Hot Line Stick? 26 Items: A Hot Line Stick is a hand tool consisting of a straight, round stick (pole) made of a suitable nonconductive material with a tool fixed to one end. The other end may be plain or have a butt mounting device fixed to it. Various types of attachments (hooks, rings, and bands) may be fixed to the body. It is designed for use in the repair and maintenance of live high voltage aerial lines. Excludes hot line sticks without heads.
Handle,Mattock-Pick 15 Items
What is a Wrench Kit? 73 Items: A Wrench Kit is an assortment of various types and sizes of wrenches such as SOCKET, SOCKET WRENCH; WRENCH, OPEN END, FIXED; WRENCH, BOX and the like. It may include adapter(s), ratchet(s) and the like. See also WRENCH SET (as modified.
What is a Brad Awl? 15 Items: A Brad Awl (AWL,BRAD) is a small, pointed tool used by shoemakers, saddlers, cabinetmakers, and the like for piercing small holes in wood, leather, and similar materials, and consists of a handle with a ferrule and a blade. The blade is round, terminating in a beveled, sharp straight edge and has a shank which passes through the center of the handle.
What is a Scratch Awl? 20 Items: A Scratch Awl (AWL,SCRATCH) is an item whose nominal length of blade is less than 4 inches (101.6 millimeters) and is provided with a nondetachable handle.
What is a Screw Extractor Set? 10 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 102 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
Jack,Scissors,Hand 26 Items
What is a Piston Ring Expander? 23 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
Mallet,Plastic 62 Items
Mallet,Rubber 10 Items
What is a Wood Mallet? 37 Items: A Wood Mallet (MALLET,WOOD) is excludes MALLET, CALKING; MALLET, HAWSING and MALLET, SERVING.
What is a Rack Bar Jack? 30 Items: A Rack Bar Jack (JACK,RACK BAR) is excludes JACK, BUMPER and JACK, REEL, HAND.
What is a Pneumatic Tire Valve Core Inserter And Remover? 14 Items: A Pneumatic Tire Valve Core Inserter And Remover (INSERTER AND REMOVER,PNEUMATIC TIRE VALVE CORE) is a bar of steel having a small cylindrical slotted end for removing or installing a valve core in a valve stem by a screwing motion. See also REPAIR TOOL, PNEUMATIC TIRE VALVE.
What is a Hand Tube Swaging Tool Kit? 20 Items: A Hand Tube Swaging Tool Kit (SWAGING TOOL KIT,TUBE,HAND) is a hand-operated noncutting tool consisting of one or more PUNCH, TUBE SWAGING, HAND and a tube flaring bar.
What is a Hand Tube Flaring Punch? 11 Items: A Hand Tube Flaring Punch (PUNCH,TUBE FLARING,HAND) is a noncutting tool having a shaped end or section designed to flare the ends of tubes. One type is designed to flare the ends of tubes against a tube sheet, and another to flare tube ends to mate with tube fittings. Includes punch components of FLARING TOOL, TUBE, HAND.
What is a Hose Strap Band Clamping Tool? 26 Items: A Hose Strap Band Clamping Tool (CLAMPING TOOL,STRAP BAND,HOSE) is an item designed to tension and lock metal straps around a rubber hose, and the like. It is also used to clamp and hold fittings therein.
What is a Mechanical Puller? 3073 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 470 Items
What is a Slip Joint Pliers? 84 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Brake Repair Pliers? 14 Items: A Brake Repair Pliers (PLIERS,BRAKE REPAIR) is a tool having jaws designed for use in brake repair operations, such as removing and replacing items such as keys, springs, and the like. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 226 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 12 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 81 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 56 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 15 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 11 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 29 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Cross Tip Screwdriver Set? 14 Items: A Cross Tip Screwdriver Set (SCREWDRIVER SET,CROSS TIP) is a group of SCREWDRIVER, CROSS TIP having different characteristics.
What is a Spanner Wrench Set? 18 Items: A Spanner Wrench Set (WRENCH SET,SPANNER) is a group of items under WRENCH, SPANNER having different characteristics.
What is a Drive Pin Punch Set? 31 Items: A Drive Pin Punch Set (PUNCH SET,DRIVE PIN) is a group of PUNCH, DRIVE PIN having different characteristics.
What is an Aligning Punch Set? 13 Items: An Aligning Punch Set (PUNCH SET,ALIGNING) is a group of PUNCH, ALIGNING having different characteristics. See also DRIFTPIN SET.
What is a Slugging Type Box Wrench Socket? 16 Items: A Slugging Type Box Wrench Socket (SOCKET,SLUGGING TYPE BOX WRENCH) is an item having a hexagonal external drive at one end, made to fit into the internal hexagonal or 12-point opening of a slugging type box wrench. The opposite end has a single-broached hexagonal opening of the same size as the external drive. The item is designed with extra thick walls to withstand the impact of sledge blows on the driving wrench.
What is a Mechanical Puller Step Plate? 44 Items: A Mechanical Puller Step Plate (STEP PLATE,MECHANICAL PULLER) is a circular disk, flanged to provide a shoulder, and designed to provide a base for the screw point of a PULLER, MECHANICAL when pulling externally mounted bearings, gears, and the like from hollow shafts or housings. It has a concentric, countersunk hole to accommodate the puller screw point.
What is a Solid Center Punch? 79 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Cable Type Ratchet Lever Puller? 20 Items: A Cable Type Ratchet Lever Puller (PULLER,RATCHET LEVER,CABLE TYPE) is an item consisting of a metal frame and ratchet lever reel to which is attached one end of a flexible cable (wire rope). The cable feeds through the fast eye in the metal frame, and may be reeved through a slip hook tackle hook. See also BINDER, LOAD; HOIST, WIRE ROPE and STRETCHER, WIRE.
What is an Electronic Equipment Tuning Wand? 18 Items: An Electronic Equipment Tuning Wand (TUNING WAND,ELECTRONIC EQUIPMENT) is a hand-held rod used in determining the adjustment of the windings of a radio frequency coil. It is made of insulating material with iron on one end and brass on the other end. By inserting the iron end in the coil, the inductance is increased and by inserting the brass end, the inductance is decreased.
What is a Combination Open End And Spanner Wrench? 14 Items: A Combination Open End And Spanner Wrench (WRENCH,OPEN END AND SPANNER,COMBINATION) is a tool having open end wrench characteristics at one end and spanner wrench features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s) at the other end.
What is a Detent Handling Tool? 187 Items: A Detent Handling Tool (HANDLING TOOL,DETENT) is a specially designed handling tool consisting of a rigid bar with a T-handle on one end. The other end is equipped with threads designed to mate the threads of a detent to facilitate inserting or extracting.
What is a Hand Material Handling Hook? 23 Items: A Hand Material Handling Hook (HOOK,MATERIAL HANDLING,HAND) is a hook whose curved end conforms to Style AP1, AP2, AP3 or AP4 of Reference Drawing Group AP. Excludes HOOK, MANHOLE COVER, HAND; HOOK, WIRE BREAKING, HAND; HOOK, ROCK CRUSHER FEEDING, HAND; HOOK, STRAINER REMOVING, HAND and HOOKS, BAG HANDLING, HAND.
What is a Magnetic Retrieving Tool? 11 Items: A Magnetic Retrieving Tool (RETRIEVING TOOL,MAGNETIC) is a hand-operated magnetic device used to locate and pick up metallic articles, such as bolts, nuts, pins, washers, and the like, in confined spaces. It may be rigid, flexible or adjustable. Excludes FINGER, MECHANICAL.
What is a Mechanical Puller Adapter? 78 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Combination Box And Open End Box Wrench? 13 Items: A Combination Box And Open End Box Wrench (WRENCH,BOX AND OPEN END BOX,COMBINATION) is a double end wrench, box and open end box, primarily designed for removing or replacing tube fittings. The opening in the open end box may be machined at an angle from the longitudinal center line of the wrench.
What is a Screw Thread Insert Inserter? 136 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Flat Tip Screwdriver Set? 48 Items: A Flat Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP) is a group of SCREWDRIVER, FLAT TIP having different characteristics.
What is a Terminal Crimping Tool Contact Positioner? 89 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 16 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is an Adjustable Wrench? 138 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 239 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 75 Items
Handle,Shovel 10 Items
What is a Socket Wrench Spanner Attachment? 88 Items: A Socket Wrench Spanner Attachment (SPANNER ATTACHMENT,SOCKET WRENCH) is an item having an adjustable or fixed span with pin, hook, or key type end that is used to fit and turn various size retaining rings, cover plates, plugs, couplings, and like parts. Usually designed to be driven by a male driver.
What is a Retaining Ring Installation Tool? 44 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Tacker? 16 Items: A Tacker is a hand-operated, hammerlike or gunlike item without a clincher, used to drive preformed connecting elements like pins, nails or staples through one object or piece of material into another. Excludes STAPLER (as modified).
What is a Bearing And Bushing Inserter? 290 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 207 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 939 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 14 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 93 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 161 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 94 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 141 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 53 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Six Point Tip Screwdriver? 155 Items: A Six Point Tip Screwdriver (SCREWDRIVER,SIX POINT TIP) is a manual screwdriver having a single nonremoveable blade having a tip with six rounded points.
What is a Seal Inserter And Remover? 147 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 478 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is a Preformed Packing Inserter And Remover? 34 Items: A Preformed Packing Inserter And Remover (INSERTER AND REMOVER,PREFORMED PACKING) is a hand tool designed to install and remove a PACKING, PREFORMED.
What is a Pin Remover? 34 Items: A Pin Remover (REMOVER,PIN) is a hand tool designed to facilitate the removal of a pin from a hole.
What is a Pin Inserter And Remover? 13 Items: A Pin Inserter And Remover (INSERTER AND REMOVER,PIN) is a rodlike tool designed to facilitate the insertion and removal of a pin from a hole.
What is an Electrical Contact Inserter And Remover? 37 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Piston Inserter? 40 Items: A Piston Inserter (INSERTER,PISTON) is a tool designed to permit installation of a piston or piston assembly without damaging the packings or piston.
What is a Spring Inserter And Remover? 85 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 13 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Stud Inserter? 22 Items: A Stud Inserter (INSERTER,STUD) is a device designed to drive in studs. It does not have any facilities for removing or extracting studs. See also INSERTER AND REMOVER, STUD.
What is a Stud Inserter And Remover? 17 Items: A Stud Inserter And Remover (INSERTER AND REMOVER,STUD) is a group of items designed to extract and to drive studs. It may include collets, guides, housings, holders and the like. See also REMOVER SET, STUD and INSERTER, STUD.
What is a Gear Inserter? 54 Items: A Gear Inserter (INSERTER,GEAR) is a hand tool designed to install various gears onto a gearshaft. It may be operated by a pushing or a striking force.
What is a Crimping Tool Die? 73 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is an Electrical Connector Inserter? 45 Items: An Electrical Connector Inserter (INSERTER,ELECTRICAL CONNECTOR) is a hand tool designed to hold an electrical connector, and to assist in the positioning and installation of the connector on a cover, panel or the like.
What is a Float? 12 Items: A Float is a tool used for concrete, plastering and grouting work.
What is a Mechanical Puller Set? 19 Items: A Mechanical Puller Set (PULLER SET,MECHANICAL) is two or more separate PULLER, MECHANICAL of different fixed sizes.
What is a Lifting Pneumatic Bag? 11 Items: A Lifting Pneumatic Bag (PNEUMATIC BAG,LIFTING) is a device made of flexible material designed to lift another item by being placed under the item and being inflated with air or some other gas. It will have a means of being connected to an air or gas source and may include a connector hose, a control valve and/or a pressure regulator.
What is a Cable Tie Installation Tool? 22 Items: A Cable Tie Installation Tool (INSTALLATION TOOL,CABLE TIE) is a lightweight, hand-held, hand-operated tool designed to fasten cable ties, straps and the like. Cable tie is inserted into the nose of the tool flush to the cable tie head. Trigger handle tightens cable tie and cuts off any excess. These installation tools are available in a variety of sizes depending on their intended use with miniature, intermediate, standard, heavy or extra heavy cross section ties.
What is a Bearing Staking Installation Tool? 159 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
Wrench Set,Ratchet 15 Items
What is a Sealant Dispenser? 26 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Retaining Ring Pliers Set? 10 Items: A Retaining Ring Pliers Set (PLIERS SET,RETAINING RING) is a group of PLIERS, RETAINING RING having different characteristics.
What is a Hand Armament Subsystem Carrier? 52 Items: A Hand Armament Subsystem Carrier (CARRIER,ARMAMENT SUBSYSTEM,HAND) is a metallic item with a clamp device and/or space for depositing articles. It is used for transporting weapon parts during maintanence and/or repair work, such as gun barrel, automatic loader, breechblock and the like.
What is a Ring Retaining Pliers Tip Set? 13 Items: A Ring Retaining Pliers Tip Set (TIP SET,PLIERS,RING RETAINING) is a collection of removable metallic tips in matched pairs used to provide various size capablities to PLIERS, RING RETAINING which permits the removal and installation of internal and external retaining rings.
What is a Plug Electrical Connector Extractor? 45 Items: A Plug Electrical Connector Extractor (EXTRACTOR,ELECTRICAL CONNECTOR,PLUG) is a hand tool designed to disassemble CONNECTOR, PLUG, ELECTRICAL from a CONNECTOR, RECEPTACLE, ELECTRICAL.
What is a Torque Wrench Adapter Set? 10 Items: A Torque Wrench Adapter Set (ADAPTER SET,TORQUE WRENCH) is tWO or more ADAPTER, TORQUE WRENCH of different sizes.
What is an Electronic Component Inserter And Remover? 79 Items: An Electronic Component Inserter And Remover (INSERTER AND REMOVER,ELECTRONIC COMPONENT) is an item which can insert or remove an electronic component package such as MICROCIRCUIT; RESISTOR, NETWORK (as modified); and the like from its mounting position or socket. Excludes INSERTER AND REMOVER, ELECTRICAL CONTACT; REMOVER, ELECTRICAL CONTACT; EXTRACTOR, ELECTRICAL CARD; EXTRACTOR, ELECTRONIC CRYSTAL UNIT; EXTRACTOR, ELECTRON TUBE.
What is an Impact Type Bit Set And Handle Screwdriver? 14 Items: An Impact Type Bit Set And Handle Screwdriver (SCREWDRIVER,BIT SET AND HANDLE,IMPACT TYPE) is an item consisting of a set of screwdriver bits and a impact driver to accommodate the bits of various types and characteristics. It is designed to transmit a strong rotating movement by the impact of a hammer blowed on the impact driver. It is used to loosen rusted or seized screws. Excludes SCREWDRIVER, BIT SET AND HANDLE.
What is a Hand Vise Jaw? 19 Items: A Hand Vise Jaw (JAW,VISE,HAND) is an item consisting of two opposing parts of a VISE, HAND. The item is moveable and able to open and close. It can hold, grasp or clamp work.
What is a Screwdriver Handle? 28 Items: A Screwdriver Handle (HANDLE,SCREWDRIVER) is an item used to accommodate various types of BIT, SCREWDRIVER. It is designed to rotate a bit that is used for installing or removing screws.
What is a Wire Twister Pliers? 25 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 284 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is a Mechanical Puller Body? 45 Items: A Mechanical Puller Body (BODY,PULLER,MECHANICAL) is an item designed to support and enclose the internal parts of a PULLER,MECHANICAL.
What is a Flat Tip And Cross Tip Screwdriver Set? 39 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is a Socket Wrench Screwdriver Attachment Set? 22 Items: A Socket Wrench Screwdriver Attachment Set (SCREWDRIVER ATTACHMENT SET,SOCKET WRENCH) is a set of screwdriver attachment, socket wrench of different sizes. Items consist of a female square drive on one end to attach to a handle, socket wrench and various screwdriver tip configurations on the opposite end. Excludes SCREWDRIVER ATTACHMENT,SOCKET WRENCH
What is an Oil Filter Wrench? 44 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 430 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Communications Equipment Spring Adjuster? 13 Items: A Communications Equipment Spring Adjuster (ADJUSTER,SPRING,COMMUNICATIONS EQUIPMENT) is a single or double end tool, equipped with slot(s) of various dimensions or with cylindrical rod(s), used for adjusting the springs or spring tensioned parts of electronic equipment.
What is a Rotating Members Aligning Tool? 32 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
What is a Final Drive Assembly Alignment Pin? 41 Items: A Final Drive Assembly Alignment Pin (ALIGNMENT PIN,FINAL DRIVE ASSEMBLY) is a special designed pin used in the assembling of the final drive.
Arm,Handling Tool 77 Items
What is a Splicing Sleeve Compressing Tool? 23 Items: A Splicing Sleeve Compressing Tool (COMPRESSING TOOL,SPLICING SLEEVE) is a hand tool having hinged leverage handles similar to a CUTTER, BOLT or pliers, designed to compress a splicing sleeve when joining the ends of two conductors, or when forming an eye splice in the end of a wire rope. Excludes CRIMPING TOOL, TERMINAL, HAND.
What is a Hand Screw Jack Extension? 14 Items: A Hand Screw Jack Extension (EXTENSION,HAND SCREW JACK) is a length of externally threaded rigid shafting which is the adjustable section of a JACK, SCREW, HAND.
What is a Mechanical Puller Gear Adapter? 21 Items: A Mechanical Puller Gear Adapter (GEAR ADAPTER,PULLER,MECHANICAL) is an adapter that adapts a PULLER,MECHANICAL, to pull a certain gear.
Handle,Hydraulic Jack 18 Items
What is a Female Electrical Contact Resizing Tool? 11 Items: A Female Electrical Contact Resizing Tool (RESIZING TOOL,FEMALE ELECTRICAL CONTACT) is a tool designed to shape to a specific size, female contacts such as those used on electrical connectors, tube sockets, crystal sockets, and pin jacks.
What is a Screwdriver And Socket Wrench Combination? 13 Items: A Screwdriver And Socket Wrench Combination is a hand-tool formed into an integral unit with a socket wrench at one end and a screwdriver bit at the other end. See also SCREWDRIVER AND WRENCH ASSEMBLY.
What is a Hand Hose Fitting Swaging Tool Kit? 11 Items: A Hand Hose Fitting Swaging Tool Kit (SWAGING TOOL KIT,HOSE FITTING,HAND) is a device, hydraulically actuated by hand or power operated pump, consisting of face plate, adapter plate, finger cages, fingers, ram, bushing, and expanding mandrels combined on a single base in various functional arrangements. It is used for swaging the outside diameter of hose assembly fittings, expanding the inside diameter of hose assemblies, and securing the fabrication of hose assemblies. Included are a hand or power operated pump, lubricant, cases, and trays.
What is a Catch Lever Tool? 12 Items: A Catch Lever Tool (LEVER TOOL,CATCH) is a specially designed hand tool which engages the opening and closing lever of a CATCH (as modified) for ease of operation. It is constructed of thin rigid material, usually flat, and one end has an engaging tongue.
What is a Manual Impact Wrench? 11 Items: A Manual Impact Wrench (WRENCH,IMPACT,MANUAL) is a manually operated handheld tool consisting of spring-loaded handle and a power-impact head which delivers a torsional impact from either continuous movement of the handle in one direction, or by a reciprocating action. It is used in tightening and loosening fasteners, such as bolts, nuts, and the like. The item may include sockets, extensions and offset fittings, nut runners, and the like.
What is a Drift? 63 Items: A Drift is an item consisting of a tubular body fitted with replaceable tips. It is designed to insert or remove mechanical components where space is restricted.
What is a Nutdriver? 46 Items: A Nutdriver is a non-powered hand tool with a screwdriver style handle, shaft and formed female hex or square socket at driving end.
What is a Locking Device Removal Tool? 12 Items: A Locking Device Removal Tool (REMOVAL TOOL,LOCKING DEVICE) is a hand tool designed to facilitate the removal of a WASHER, KEY and a LOCKING PLATE, NUT AND BOLT.
What is a Hydraulic Fitting Crimping Tool Head? 26 Items: A Hydraulic Fitting Crimping Tool Head (HEAD,CRIMPING TOOL,HYDRAULIC FITTING) is a component of a crimping tool used to compress fittings on fluid tubes. It consists of a U-shape item, in which, are mounted different sizes of DIE, CRIMPING TOOL for tubes of various diameters.
What is a Torque Screwdriver? 11 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.
What is a Special Purpose Combination Wrench? 13 Items: A Special Purpose Combination Wrench (WRENCH,COMBINATION,SPECIAL PURPOSE) is a tool having a combination of ends and facets. The ends may have open end, box or spanner characteristics. The sides may have features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s). Designed to fit specific items, not sized as standard or metric.
What is a Screwdriver Bit Holder? 56 Items: A Screwdriver Bit Holder (HOLDER,SCREWDRIVER BIT) is an attachment with a socket end for accepting male hexagon shank insert bits and a drive end for adapting to a portable power or hand tool.
What is a Telescoping Pole? 16 Items: A Telescoping Pole (POLE,TELESCOPING) is an item which is designed to be extended or compressed by the sliding of overlapping sections. This item may or may not be able to accommodate an extension.

Stock Items From Supply Class 5120 Page 100 of 110

5120-14-493-3449
Cle

144933449
0411-60224: RNCC: 3 | RNVC: 2
F300 0T 012 4875: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-348-4995
Tet Femel Tournevis

143484995
8812856000: RNCC: 3 | RNVC: 2

29 Mar 1978

5120-14-558-8054
Six Point Tip Screwdriver

145588054
775498: RNCC: 3 | RNVC: 2
ANXP7X50: RNCC: 3 | RNVC: 2
3148517754980: RNCC: 5 | RNVC: 2

6 Nov 2008

5120-14-308-3358

5120-14-491-2897
Cle

144912897
3922914: RNCC: 3 | RNVC: 2
F300 0T 002 1576: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-285-4480
Spanner Wrench

142854480
45255: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-347-0897
Spanner Wrench

143470897
50022: RNCC: 3 | RNVC: 2

19 Jan 1978

5120-14-278-4680
Spanner Wrench

142784680
163054: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-490-6931
File

144906931
241 F 01368 000: RNCC: 3 | RNVC: 2
F300 0T 000 1061: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-352-6078
Electrical Contact Inserter

143526078
M81969-14-03: RNCC: 3 | RNVC: 2
M15570-16: RNCC: 3 | RNVC: 2
809855: RNCC: 3 | RNVC: 2
8522-16: RNCC: 5 | RNVC: 2
0113357D00: RNCC: 5 | RNVC: 2
0195710N00: RNCC: 5 | RNVC: 2
91566833: RNCC: 5 | RNVC: 2
206-9326: RNCC: 5 | RNVC: 2
00-915-4588: RNCC: 6 | RNVC: 9

16 Oct 1978

5120-14-427-1496
Socket Head Screw Key

144271496
6252-54349: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-517-3779
Bearing Staking Installation Tool

145173779
0XB101-244-700-22: RNCC: 3 | RNVC: 2

8 Dec 1999

5120-14-207-5303
Slip Joint Pliers

142075303
2P150: RNCC: 3 | RNVC: 2
369642: RNCC: 5 | RNVC: 2
2111: RNCC: 5 | RNVC: 2
288LA: RNCC: 5 | RNVC: 2
871-160: RNCC: 5 | RNVC: 9
891C: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-480-2677
Bearing And Bushing Remover

144802677
888-361-800-1: RNCC: 3 | RNVC: 2

28 Feb 1996

5120-14-430-2467

5120-14-221-8792

5120-14-220-7933
Open End Wrench

142207933
71-36: RNCC: 3 | RNVC: 2
10A36: RNCC: 5 | RNVC: 2
RACC36: RNCC: 5 | RNVC: 2
M6-024: RNCC: 5 | RNVC: 2
71-36: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-319-4290
Pliers

143194290
ER0P1: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-578-1860
Mechanical Puller

145781860
TM2230P007: RNCC: 3 | RNVC: 2
TM2230P003: RNCC: 5 | RNVC: 9

7 Nov 2013

5120-14-558-0425
Cross Tip Screwdriver

145580425
ANP1X100: RNCC: 3 | RNVC: 2
FACOM ANP1X100: RNCC: 5 | RNVC: 2
91883650: RNCC: 5 | RNVC: 2

25 Aug 2008

5120-14-503-4689
Electronic Component Inserter And Remover

145034689
39338453: RNCC: 3 | RNVC: 2

14 Jan 1998

5120-14-489-0322
Combination Box And Open End Wrench

144890322
39.8: RNCC: 3 | RNVC: 2
3148510998732: RNCC: 5 | RNVC: 2
0099873: RNCC: 5 | RNVC: 9

18 Jun 1997

5120-14-263-0814

5120-14-441-2373
Socket Head Screw Key

144412373
703A93-0900-42: RNCC: 3 | RNVC: 2

22 Aug 1990

5120-14-396-4122
Empilage Outil

143964122
6274-51012: RNCC: 3 | RNVC: 2
6274-2500122: RNCC: 5 | RNVC: 2

27 Nov 1984

5120-14-362-1746
Faux Mors

143621746
C46348: RNCC: 3 | RNVC: 2

20 Feb 1980

5120-14-436-0201
Outil Reglage Cale

144360201
RT31371: RNCC: 3 | RNVC: 2

29 Nov 1989

5120-14-556-5224
Torque Wrench

145565224
DYF-1000-1: RNCC: 3 | RNVC: 2

18 Mar 2008

5120-14-212-9122
Cle A Talon Special

142129122
9970-111-011: RNCC: 3 | RNVC: 2
9970-111-011-00: RNCC: 3 | RNVC: 2

1 Jan 1964

5120-14-322-1348
Oeilleton Doutil

143221348
121E95-190-21-0: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-219-4114
Cle Attache Reservo

142194114
17-9-57: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-249-6780
Cle A Ergots Specia

142496780
2-02546: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-479-7663
Wrench Kit

144797663
7418104: RNCC: 3 | RNVC: 2

5 Feb 1996

5120-14-507-0833
Spanner Wrench

145070833
5817307L00: RNCC: 3 | RNVC: 2

10 Jun 1998

5120-14-403-0359
Adjustable Wrench

144030359
122-15C: RNCC: 3 | RNVC: 2

25 Jul 1985

5120-14-299-6470
Rupteur Standard

142996470
35051012: RNCC: 3 | RNVC: 2
35051011: RNCC: 5 | RNVC: 2
35051023: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-297-3664
Extracteur De Carte

142973664
989490: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-386-6744

5120-14-428-5273
Support Plaque

144285273
MJK4092102: RNCC: 3 | RNVC: 2

8 Dec 1988

5120-14-390-9864
Evacuation Purge

143909864
MPA063-01: RNCC: 3 | RNVC: 2

1 Mar 1984

5120-14-351-5946
Speci Cle A Douille

143515946
VDP0000AR1AJ005: RNCC: 3 | RNVC: 2

12 Sep 1978

5120-14-446-0549
Spanner Wrench

144460549
SV1433: RNCC: 3 | RNVC: 2
5000261433: RNCC: 5 | RNVC: 2
SV1433: RNCC: 5 | RNVC: 9

5 Mar 1991

5120-14-384-6316
Electrical Card Extractor

143846316
16928933: RNCC: 3 | RNVC: 2
16928933: RNCC: 5 | RNVC: 9

2 Jun 1983

5120-14-422-2304
Spanner Wrench

144222304
0471-203000: RNCC: 3 | RNVC: 2

24 Feb 1988

5120-14-372-7648
Bague De Maintien

143727648
3160S95-66-075: RNCC: 3 | RNVC: 2
3160-95-66-075: RNCC: 5 | RNVC: 2

21 Sep 1981

5120-14-466-9255
Electrical Contact Inserter

144669255
282923: RNCC: 3 | RNVC: 2
85-801-3021: RNCC: 6 | RNVC: 9

9 Dec 1993

5120-14-245-9070
Collier Pour Evasem

142459070
7062BA1C0LLIERT1-30: RNCC: 3 | RNVC: 9

1 Jan 1968

5120-14-566-9753
Torque Wrench

145669753
S.208A100: RNCC: 3 | RNVC: 2
3148516934338: RNCC: 5 | RNVC: 2
693433: RNCC: 5 | RNVC: 2

24 Jan 2011

5120-14-516-1707
Spanner Wrench

145161707
467373: RNCC: 3 | RNVC: 2

14 Sep 1999

5120-14-385-5762
Mechanical Puller Attachment

143855762
130636: RNCC: 3 | RNVC: 9

26 Jul 1983

5120-14-423-2901
Vise Jaw Caps

144232901
76150: RNCC: 3 | RNVC: 2
91581148: RNCC: 5 | RNVC: 2
SAM76150: RNCC: 5 | RNVC: 9

14 Apr 1988

5120-14-361-8452
Spanner Wrench

143618452
8812459003: RNCC: 3 | RNVC: 2

20 Feb 1980

5120-14-524-1023
Pince De Prehension

145241023
401-MT: RNCC: 3 | RNVC: 2
401MT: RNCC: 5 | RNVC: 2

28 Feb 2001

5120-14-010-0546
Bearing And Bushing Inserter

140100546
3130S98-02-018: RNCC: 3 | RNVC: 2

1 Jan 1961

5120-14-362-2138
De Centrage Obus

143622138
30MS017-0000006: RNCC: 3 | RNVC: 2

20 Feb 1980

5120-14-402-2072
Outil Dextraction

144022072
4101-061: RNCC: 3 | RNVC: 2
4101-061: RNCC: 5 | RNVC: 2

26 Jun 1985

5120-14-577-1372
Socket Wrench

145771372
8815099765: RNCC: 3 | RNVC: 2
8819740002: RNCC: 5 | RNVC: 2

13 Aug 2013

5120-14-245-2083
Pince Dinsertion Co

142452083
M15513-25: RNCC: 3 | RNVC: 2
M15513-25A: RNCC: 5 | RNVC: 2
M15513-25: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-526-0382
Screwdriver Bit

145260382
ES.184T: RNCC: 3 | RNVC: 2
1083624W00: RNCC: 5 | RNVC: 2

28 Jun 2001

5120-14-237-5435
Cle Speciale

142375435
26-165: RNCC: 3 | RNVC: 2
M15-007: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-352-3168
Montage Joint Obus

143523168
MGF170-01: RNCC: 3 | RNVC: 2
MGF170-01: RNCC: 5 | RNVC: 2

16 Oct 1978

5120-14-406-1580
Open End Wrench

144061580
006293222P: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-522-6699
Socket Wrench Extension

145226699
1056351L00: RNCC: 3 | RNVC: 2

15 Nov 2000

5120-14-463-2593
Face Spanner Wrench Socket

144632593
10264243: RNCC: 3 | RNVC: 2

4 Jun 1993

5120-14-443-6330
Fourche Retenue Axe

144436330
NO PRIMARY REF14-443-6330: RNCC: 3 | RNVC: 2
OU134377: RNCC: 5 | RNVC: 9

30 Nov 1990

5120-14-363-2238
Spanner Wrench

143632238
NO PRIMARY REF14-363-2238: RNCC: 3 | RNVC: 2
231340: RNCC: 5 | RNVC: 9
85-691-1503: RNCC: 6 | RNVC: 9

3 Apr 1980

5120-14-465-4700
Face Spanner Wrench Socket

144654700
851-500-144-0: RNCC: 3 | RNVC: 2

30 Sep 1993

5120-14-413-8176
Craftsman's Tweezers

144138176
5495-5: RNCC: 3 | RNVC: 2
5495-5: RNCC: 5 | RNVC: 2
85-693-2887: RNCC: 6 | RNVC: 9

20 Jan 1987

5120-14-431-4818
Socket Head Screw Key

144314818
0372-42-10068: RNCC: 3 | RNVC: 2

19 Apr 1989

5120-14-364-9206
Coffret Daccessoire

143649206
321A97-2220-01: RNCC: 3 | RNVC: 2
85-691-0028: RNCC: 6 | RNVC: 9

2 Sep 1980

5120-14-513-9481
Flat Tip Screwdriver

145139481
ENFD6560-2-5X14X200: RNCC: 3 | RNVC: 2

19 Apr 1999

5120-14-572-0035
Six Point Tip Screwdriver Set

145720035
ANXR.J7PB: RNCC: 3 | RNVC: 2
0795253: RNCC: 5 | RNVC: 2
3148517952539: RNCC: 5 | RNVC: 2
1628789: RNCC: 5 | RNVC: 2

31 May 2012

5120-14-577-2212
Socket Wrench Set

145772212
66A.JE9T: RNCC: 3 | RNVC: 2
3148516636997: RNCC: 5 | RNVC: 2
663699: RNCC: 5 | RNVC: 2

23 Aug 2013

5120-14-362-5058
Pneu Demonte Sangle

143625058
003008035M: RNCC: 3 | RNVC: 2

19 Mar 1980

5120-14-490-8692
Griffe

144908692
4061 283 210 160: RNCC: 3 | RNVC: 2
F300 0T 000 4931: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-572-0630
Cross Tip Screwdriver

145720630
PNA00087A: RNCC: 3 | RNVC: 2

5 Jun 2012

5120-14-269-4957

5120-14-294-6803

5120-14-308-7891
Pince-Etau A Souder

143087891
0180900: RNCC: 3 | RNVC: 2
502: RNCC: 5 | RNVC: 2
0714 09 13: RNCC: 5 | RNVC: 2

1 Jan 1974

5120-14-490-6874
Drill

144906874
240 D 01658 016: RNCC: 3 | RNVC: 2
F300 0T 000 0979: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-220-8526
Cle Pied A Coulisse

142208526
PR46041: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-578-1943
Mechanical Puller S

145781943
8818804005: RNCC: 3 | RNVC: 2

8 Nov 2013

5120-14-377-5192
Spanner Wrench

143775192
M24-026: RNCC: 3 | RNVC: 2

17 May 1982

5120-14-410-2302
Socket Wrench Spanner Attachment

144102302
433-65008-101: RNCC: 3 | RNVC: 2

18 Jun 1986

5120-14-359-3466
Sertisseu Machoires

143593466
R282245: RNCC: 3 | RNVC: 2
85-800-7204: RNCC: 6 | RNVC: 9

2 Oct 1979

5120-14-315-1870
Outil Pousse-Joint

143151870
0-65051-1: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-561-1691
Loop Clamp Inserter

145611691
734587-1: RNCC: 3 | RNVC: 2

22 Jun 2009

5120-14-249-6764
Cle Vis Tete Creuse

142496764
2-02529: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-329-3275
Positionneur Roulem

143293275
14369-5015: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-297-4272

5120-14-439-2011
Spanner Wrench

144392011
16350032: RNCC: 3 | RNVC: 2

25 Apr 1990

5120-14-526-7895
Torque Wrench Adapter

145267895
132448: RNCC: 3 | RNVC: 2

5 Sep 2001

5120-14-545-7780
Hand Terminal Crimping Tool

145457780
37659: RNCC: 3 | RNVC: 2

12 May 2005

5120-14-276-8372
Cone De Serrage

142768372
R31674-18-18R50-1: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-487-5851
Flat Tip Screwdriver

144875851
274M3: RNCC: 3 | RNVC: 2
274M-3: RNCC: 3 | RNVC: 2
3272670028852: RNCC: 5 | RNVC: 2

10 Apr 1997

5120-14-488-3174
Socket Wrench Socket

144883174
R.14LA: RNCC: 3 | RNVC: 2
0051345: RNCC: 5 | RNVC: 2
3148510513454: RNCC: 5 | RNVC: 2
235-4040: RNCC: 5 | RNVC: 2
R14LA: RNCC: 5 | RNVC: 2
FACOMR.14LA: RNCC: 5 | RNVC: 9
AA006671: RNCC: 6 | RNVC: 9

30 Apr 1997

5120-14-325-3446
Raccord Male Court

143253446
WA.1145: RNCC: 3 | RNVC: 2
3148510793801: RNCC: 5 | RNVC: 2
WA-1145: RNCC: 5 | RNVC: 2
WA1145: RNCC: 5 | RNVC: 2
0079380: RNCC: 5 | RNVC: 9

2 Jul 1975

5120-14-422-2291
Socket Head Screw Key

144222291
0372-42-10088: RNCC: 3 | RNVC: 2

24 Feb 1988

5120-14-283-9293
Socket Head Screw Key

142839293
NO PRIMARY REF14-283-9293: RNCC: 3 | RNVC: 2
3170848: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-200-9156
Open End Wrench

142009156
3-26X29: RNCC: 3 | RNVC: 2

1 Jan 1962

5120-14-210-9853
Socket Wrench Socket

142109853
J.16H: RNCC: 3 | RNVC: 2
0239245W00: RNCC: 5 | RNVC: 2
0713 121 116: RNCC: 5 | RNVC: 2
3059000801: RNCC: 5 | RNVC: 2
3148510274805: RNCC: 5 | RNVC: 2
J16H: RNCC: 5 | RNVC: 2
91574532: RNCC: 5 | RNVC: 2
0027480: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-379-2944
Open End Wrench

143792944
2-25753: RNCC: 3 | RNVC: 2

6 Sep 1982

5120-14-508-8450
Kit Outillage A Tir

145088450
PX.CM144: RNCC: 3 | RNVC: 2

30 Sep 1998

5120-14-523-8257
A Cailloux Croc

145238257
078504: RNCC: 3 | RNVC: 2

5 Feb 2001

5120-14-299-3002
Drift

142993002
29365-1: RNCC: 3 | RNVC: 2
29365-1: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-274-7872

5120-14-455-0168
Spanner Wrench

144550168
M47361: RNCC: 3 | RNVC: 2

1 May 1992

5120-14-371-4136
Spanner Wrench

143714136
6254-57059: RNCC: 3 | RNVC: 2

5 Aug 1981

5120-14-378-5710
Face Spanner Wrench Socket

143785710
UHG303-24-01: RNCC: 3 | RNVC: 2
UHG303-24-01: RNCC: 5 | RNVC: 2

11 Aug 1982

5120-14-513-7382
Flat Tip Screwdriver

145137382
ENFD6560-1X5-5X150: RNCC: 3 | RNVC: 2

9 Apr 1999

5120-14-501-4942
Spanner Wrench

145014942
NO PRIMARY REF14-501-4942: RNCC: 3 | RNVC: 2
NNP5120848465548: RNCC: 5 | RNVC: 9

29 Oct 1997

5120-14-262-9316
Socket Wrench Handle Bar

142629316
NO PRIMARY REF14-262-9316: RNCC: 3 | RNVC: 2
144K197: RNCC: 5 | RNVC: 9

1 Jan 1970

5120-14-405-4524
Mechanical Puller Attachment

144054524
U53S2: RNCC: 3 | RNVC: 2
85-693-1800: RNCC: 6 | RNVC: 9

27 Nov 1985

5120-14-224-9908
Open End Wrench

142249908
71-41: RNCC: 3 | RNVC: 2
10A41: RNCC: 5 | RNVC: 2
RACC41: RNCC: 5 | RNVC: 2
00058263: RNCC: 5 | RNVC: 2
170320: RNCC: 5 | RNVC: 2

1 Jan 1966

5120-14-357-7703
Molder's Foundry Lifter

143577703
0404-00304: RNCC: 3 | RNVC: 2
0421-00403: RNCC: 5 | RNVC: 2

20 Jul 1979

5120-14-564-3597
Hand Hammer

145643597
62383544AA: RNCC: 3 | RNVC: 2

26 Apr 2010

5120-14-291-3456
Broche De Montage

142913456
172117: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-308-5695

5120-14-251-1034

5120-14-558-5176
Mechanical Puller

145585176
888-492-100-1: RNCC: 3 | RNVC: 2

10 Oct 2008

5120-14-262-7496
Degorgeoir A Bigorn

142627496
13-93-11X20: RNCC: 2 | RNVC: 2

1 Jan 1970

5120-14-483-0672
Cross Tip Screwdriver

144830672
NO PRIMARY REF14-483-0672: RNCC: 3 | RNVC: 2
0004056: RNCC: 5 | RNVC: 2
3148510040561: RNCC: 5 | RNVC: 2
ACP.0X250: RNCC: 5 | RNVC: 2

8 Aug 1996

5120-14-222-6201
Socket Wrench Socket

142226201
0028330: RNCC: 3 | RNVC: 2
J9-16L: RNCC: 5 | RNVC: 2
JL9-16: RNCC: 5 | RNVC: 2

1 Jan 1966

5120-14-280-4237
Crochet De Reglage

142804237
NO PRIMARY REF14-280-4237: RNCC: 3 | RNVC: 2
8144-4: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-407-2043
Bearing And Bushing Inserter

144072043
100769: RNCC: 3 | RNVC: 2

12 Feb 1986

5120-14-386-6010
Montage Butee

143866010
9970-125-073: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-360-5258
Spanner Wrench

143605258
7062RURB60-40-80IN0XAMAGNETIQUE: RNCC: 2 | RNVC: 2

23 Nov 1979

5120-14-368-5976
Outil Controle Jeu

143685976
25545900200: RNCC: 3 | RNVC: 2
255459002: RNCC: 5 | RNVC: 9

20 Feb 1981

5120-14-341-6063

5120-14-283-9574
Open End Wrench

142839574
RT9585: RNCC: 3 | RNVC: 2
85-656-0370: RNCC: 6 | RNVC: 9

1 Jan 1972

5120-14-387-8034
Socket Head Screw Key

143878034
NO PRIMARY REF14-387-8034: RNCC: 3 | RNVC: 2
R2FSPECIALERI: RNCC: 5 | RNVC: 9

12 Oct 1983

5120-14-273-7530
Pliers

142737530
132: RNCC: 5 | RNVC: 9
1517-14: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-434-1106
Sleeve Stretching Pliers

144341106
TLCH50: RNCC: 3 | RNVC: 2

6 Sep 1989

5120-14-480-8623
Socket Wrench Socket

144808623
RB11/32: RNCC: 3 | RNVC: 2
00.44.45.80: RNCC: 5 | RNVC: 2
0053325: RNCC: 5 | RNVC: 2
3148510533254: RNCC: 5 | RNVC: 2

4 Apr 1996

5120-14-459-5906
Carpenters' Pincers

144595906
E73-114TYPE1-250: RNCC: 2 | RNVC: 2
245-25: RNCC: 3 | RNVC: 2
137040: RNCC: 3 | RNVC: 2
3272670256897: RNCC: 5 | RNVC: 2
137043: RNCC: 5 | RNVC: 2
320-25LAR: RNCC: 5 | RNVC: 2
SYQ1787: RNCC: 5 | RNVC: 2
ISO9243TYPE1-250: RNCC: 5 | RNVC: 2

10 Dec 1992

5120-14-322-4599
Socket Wrench Socket

143224599
9970-115-605: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-402-5166
Jeu Complet D'outil

144025166
000065000: RNCC: 3 | RNVC: 2

10 Jul 1985

5120-14-476-9412
Emmanchement Guide

144769412
5001007590: RNCC: 3 | RNVC: 2

12 Jul 1995

5120-14-437-9369
Spanner Wrench

144379369
100526: RNCC: 3 | RNVC: 2
A132533: RNCC: 5 | RNVC: 2

28 Feb 1990

5120-14-447-7367
Bearing And Bushing Inserter

144477367
36545902200: RNCC: 3 | RNVC: 2
N574340: RNCC: 5 | RNVC: 2

29 May 1991

5120-14-493-2064
Cle

144932064
5000263167: RNCC: 3 | RNVC: 2
F300 0T 011 3438: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-226-3750

5120-14-303-6275

5120-14-263-6480

5120-14-248-7512
Broches Jeux De

142487512
MS287: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-248-3551
Rodoir

142483551
10457: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-516-8029
Cle

145168029
5001008724: RNCC: 3 | RNVC: 2

18 Oct 1999

5120-14-380-8391
Spanner Wrench

143808391
PR47605M1: RNCC: 3 | RNVC: 2

14 Dec 1982

5120-14-447-3465
Open End Box Wrench Set

144473465
42.JE5: RNCC: 3 | RNVC: 2
0529050: RNCC: 5 | RNVC: 2
42JE5: RNCC: 5 | RNVC: 2
91713205: RNCC: 5 | RNVC: 2
3148515290503: RNCC: 5 | RNVC: 2

15 May 1991

5120-14-515-5340
Final Drive Assembly Alignment Pin

145155340
150G4362: RNCC: 3 | RNVC: 2

21 Jul 1999

5120-14-528-7713
Tube Packing Ring Installing Tool

145287713
TM0797G001: RNCC: 3 | RNVC: 2

14 Feb 2002

5120-14-380-4700
Socket Head Screw Key

143804700
525829: RNCC: 3 | RNVC: 2
00525829: RNCC: 5 | RNVC: 2

29 Nov 1982

5120-14-507-6121
Retaining Ring Pliers

145076121
199E.23: RNCC: 3 | RNVC: 2
199.E23: RNCC: 5 | RNVC: 2

29 Jul 1998

5120-14-488-5586
Retaining Ring Pliers

144885586
179E.23: RNCC: 3 | RNVC: 2
0141295: RNCC: 5 | RNVC: 2
179E23: RNCC: 5 | RNVC: 2
3148511412954: RNCC: 5 | RNVC: 2

21 May 1997

5120-14-295-6672
Retaining Ring Pliers

142956672
46C: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-349-3774
Spanner Wrench

143493774
C47013: RNCC: 3 | RNVC: 2

22 May 1978

5120-14-552-9804
Spanner Wrench

145529804
1801032: RNCC: 3 | RNVC: 2

21 Feb 2007

5120-14-375-1767
Spanner Wrench

143751767
16380162: RNCC: 3 | RNVC: 2
16380162: RNCC: 5 | RNVC: 9

26 Feb 1982

5120-14-459-1637
Bearing Staking Installation Tool

144591637
45215116: RNCC: 3 | RNVC: 2
45215116: RNCC: 5 | RNVC: 9

19 Nov 1992

5120-14-456-3082
Open End Wrench

144563082
32688: RNCC: 3 | RNVC: 2

25 Jun 1992

5120-14-531-6736
Craftsman's Tweezers Set

145316736
147.J5: RNCC: 3 | RNVC: 2

11 Sep 2002

5120-14-375-8062
Spanner Wrench

143758062
300C90548: RNCC: 3 | RNVC: 2
91386587: RNCC: 5 | RNVC: 2
300C90548: RNCC: 5 | RNVC: 2
300C90548: RNCC: 5 | RNVC: 9
300C90548: RNCC: 5 | RNVC: 9

30 Mar 1982

5120-14-541-6680
Detent Handling Tool

145416680
8052845Y00: RNCC: 3 | RNVC: 2

17 Jun 2004

5120-14-503-4681
Electronic Component Inserter And Remover

145034681
39338131: RNCC: 3 | RNVC: 2

14 Jan 1998

5120-14-270-8695
Spanner Wrench

142708695
203027: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-363-1521
Socket Wrench Crowfoot Attachment

143631521
FC0M23: RNCC: 3 | RNVC: 2
FC0M23: RNCC: 5 | RNVC: 2
85-689-9138: RNCC: 6 | RNVC: 9

3 Apr 1980

5120-14-298-8379
Spanner Wrench

142988379
260-75-21-01: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-314-9157
Face Spanner Wrench Socket

143149157
M2-043: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-399-2023
Mechanical Puller Attachment

143992023
0-51706-12: RNCC: 3 | RNVC: 2

6 Mar 1985

5120-14-350-0252
Mechanical Puller Attachment

143500252
3130S95-60-022: RNCC: 3 | RNVC: 2

14 Jun 1978

5120-14-404-1015

5120-14-506-9986
Screwdriver Bit

145069986
ENFD6515-C1X5-5X39X1-4: RNCC: 3 | RNVC: 2
F300 0P 000 1288: RNCC: 5 | RNVC: 2

3 Jun 1998

5120-14-213-5803
Cle Dassemblage

142135803
1-1038-0261: RNCC: 3 | RNVC: 2
1-1038-02-61: RNCC: 5 | RNVC: 9
1-1038-02-61: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-283-9724
Broche Equipee

142839724
MS683: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-308-5092
Extracteur De Siege

143085092
77795ET77813: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-357-2689
Spanner Wrench

143572689
0BEP19-521819D: RNCC: 3 | RNVC: 2

7 Jun 1979

5120-14-513-5349
Flat Tip Screwdriver

145135349
SN30UT0008: RNCC: 3 | RNVC: 2

24 Mar 1999

5120-14-516-7996
Piston Ring Compressor

145167996
5000260824: RNCC: 3 | RNVC: 2

18 Oct 1999

5120-14-228-3239
Solid Center Punch

142283239
3651: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-484-9778
Cle Speciale

144849778
52240901300: RNCC: 3 | RNVC: 2

14 Dec 1996

5120-14-202-5580
Blacksmith's Top Fuller

142025580
NO PRIMARY REF14-202-5580: RNCC: 3 | RNVC: 2
4088M13: RNCC: 5 | RNVC: 9

1 Jan 1963

5120-14-215-1897
Tournevis A Fente

142151897
50508: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-511-0288
Screwdriver Bit

145110288
EH.101/8: RNCC: 3 | RNVC: 2

25 Nov 1998

5120-14-249-6787

5120-14-225-5588
Extracteur De Culas

5120-14-273-8245
Dresse-Meule A Main

142738245
DIAB0L0: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-410-3899
Pliers

144103899
EQ72-18REP42: RNCC: 3 | RNVC: 2

18 Jun 1986

5120-14-383-6525
Vise Jaw Caps

143836525
S10-0152-1462: RNCC: 3 | RNVC: 2

11 Apr 1983

5120-14-421-9270
Socket Head Screw Key

144219270
E74331-10AU: RNCC: 2 | RNVC: 2

10 Feb 1988

5120-14-375-2527
Spanner Wrench

143752527
73-115-006: RNCC: 3 | RNVC: 2

26 Feb 1982

5120-14-430-1081
Deverrouilla Levier

144301081
6232-58510: RNCC: 3 | RNVC: 2

1 Mar 1989

5120-14-375-1699
Open End Wrench

143751699
34-11/16: RNCC: 3 | RNVC: 2
3148510985404: RNCC: 5 | RNVC: 2
34-11-16: RNCC: 5 | RNVC: 2

30 Jan 1982

5120-14-485-8842
Open End Wrench

144858842
K7739-7/8BS3/4W-11/16BS5/8W: RNCC: 3 | RNVC: 2
7/8BS3/4W-11/16BS5/8W: RNCC: 5 | RNVC: 2

19 Feb 1997

5120-14-569-3382
Electrical Contact Inserter And Remover

145693382
838019: RNCC: 3 | RNVC: 2
8380.02: RNCC: 5 | RNVC: 2

6 Sep 2011

5120-14-288-1883

5120-14-316-9699
Hand-Operated Grommet And Eyelet Press

143169699
NO PRIMARY REF14-316-9699: RNCC: 3 | RNVC: 2
PM1B: RNCC: 5 | RNVC: 9
PM1BC: RNCC: 5 | RNVC: 9
PN4E: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-456-8473
Spanner Wrench

144568473
NO PRIMARY REF14-456-8473: RNCC: 3 | RNVC: 2
BLB89: RNCC: 5 | RNVC: 9
85-694-5939: RNCC: 6 | RNVC: 9

24 Jul 1992

5120-14-464-9120
Sciage Serre-Joint

144649120
851-930-332-0: RNCC: 3 | RNVC: 2

8 Sep 1993

5120-14-521-5313
Socket Wrench Socket

145215313
NKB.41: RNCC: 3 | RNVC: 2
NKB41: RNCC: 5 | RNVC: 2

9 Aug 2000

5120-14-500-9607
Socket Wrench Socket

145009607
E69402600045: RNCC: 3 | RNVC: 2
F300 0T 024 9819: RNCC: 6 | RNVC: 9

29 Oct 1997

5120-14-360-3723
Pliers

143603723
A128346: RNCC: 3 | RNVC: 2
100251: RNCC: 5 | RNVC: 2

23 Nov 1979

5120-14-231-8833

5120-14-232-6805

5120-14-318-2206

5120-14-338-9006
Bouchon Outill-Pose

143389006
8811758000: RNCC: 3 | RNVC: 2

17 Dec 1976

5120-14-575-1824
Spanner Wrench

145751824
82025705000: RNCC: 3 | RNVC: 1

19 Mar 2013

5120-14-556-9001
Screwdriver Bit

145569001
61929511AA: RNCC: 3 | RNVC: 2

21 Apr 2008

5120-14-248-3545

5120-14-451-2691
Graissage Outillage

144512691
MMG060-11: RNCC: 3 | RNVC: 2
MMG060-11: RNCC: 5 | RNVC: 2

6 Nov 1991

5120-14-516-9020
Socket Wrench Socket

145169020
R.3/16E: RNCC: 3 | RNVC: 2

20 Oct 1999

5120-14-252-0921
Open End Wrench

142520921
E74-301-36: RNCC: 2 | RNVC: 2
69-36: RNCC: 3 | RNVC: 2
E74301C36AGL: RNCC: 5 | RNVC: 2
3272670225657: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-312-4053
Electrical Card Extractor

143124053
NO PRIMARY REF14-312-4053: RNCC: 3 | RNVC: 2
19410602: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-378-5550
Btp Montage Jet

143785550
6805J32-1671-00: RNCC: 3 | RNVC: 2
6805360A32-1671-00: RNCC: 5 | RNVC: 2

11 Aug 1982

5120-14-385-3360
Retenue Bride Out

143853360
365A93-3341-00: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-347-0337
Electrical Card Extractor

143470337
16345033: RNCC: 3 | RNVC: 2
16345033: RNCC: 5 | RNVC: 9

19 Jan 1978

5120-14-342-8778
Quick Adjusting Screw Clamp

143428778
20-40: RNCC: 3 | RNVC: 2

16 May 1977

5120-14-374-6786

5120-14-451-0464
Polisseur

144510464
02240035700: RNCC: 3 | RNVC: 2
445725-00: RNCC: 5 | RNVC: 2
D315467: RNCC: 5 | RNVC: 2

28 Oct 1991

5120-14-468-0195
Open End Wrench

144680195
7-011286-3: RNCC: 3 | RNVC: 2
7-011286-3: RNCC: 5 | RNVC: 9

8 Feb 1994

5120-14-287-8457
Socket Wrench Socket

142878457
K1: RNCC: 3 | RNVC: 2
C-1': RNCC: 3 | RNVC: 2
C1: RNCC: 3 | RNVC: 2
K1: RNCC: 3 | RNVC: 9
3272670270978: RNCC: 5 | RNVC: 2
DEMK1: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-505-9348
Flat Tip Screwdriver

145059348
F300 0P 000 1291: RNCC: 3 | RNVC: 2
ENFD6516-A0-6X3-5X100X185: RNCC: 3 | RNVC: 2

30 Mar 1998

5120-14-293-2922
Open End Wrench

142932922
D1553-4815: RNCC: 3 | RNVC: 2
D1553-4815: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-247-2138
Spanner Wrench

142472138
1926T: RNCC: 3 | RNVC: 2
MR3630-80: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-362-7690
Spanner Wrench

143627690
PR47327: RNCC: 3 | RNVC: 2
85-689-7948: RNCC: 6 | RNVC: 9

19 Mar 1980

5120-14-416-5126
Spanner Wrench

144165126
7527-22000: RNCC: 3 | RNVC: 2

10 Jun 1987

5120-14-436-4793
Bearing And Bushing Inserter And Remover

144364793
350A93-3722-00: RNCC: 3 | RNVC: 2

3 Jan 1990

5120-14-548-7389
Expansion Shield Setting Tool

145487389
359-22N: RNCC: 3 | RNVC: 2

6 Feb 2006

5120-14-304-3777
Spanner Wrench

143043777
Y075-009: RNCC: 3 | RNVC: 2
80900-890: RNCC: 5 | RNVC: 2

1 Jan 1974

5120-14-440-6798
Mechanical Puller Attachment

144406798
332A93-3604-28: RNCC: 3 | RNVC: 2

18 Jul 1990

5120-14-374-6769
Face Spanner Wrench Socket

143746769
D1512-2244: RNCC: 3 | RNVC: 2

30 Jan 1982

5120-14-325-4772

5120-14-505-9280
Open End Wrench

145059280
H117215: RNCC: 3 | RNVC: 2

30 Mar 1998

5120-14-295-2902
Spanner Wrench

142952902
0399-09: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-484-7080
Pliers

144847080
Z7001: RNCC: 3 | RNVC: 2
7001: RNCC: 5 | RNVC: 2
SYB4010: RNCC: 5 | RNVC: 2

4 Dec 1996

5120-14-538-8821
Socket Head Screw Key

145388821
NGM0022030200494: RNCC: 2 | RNVC: 2

9 Dec 2003

5120-14-540-9863
Face Spanner Wrench Socket

145409863
LC10107: RNCC: 3 | RNVC: 2

5 May 2004

5120-14-284-1948
Impact Type Bit Set And Handle Screwdriver

142841948
NJ.261M: RNCC: 3 | RNVC: 2
3148515094200: RNCC: 5 | RNVC: 2
NJ261M: RNCC: 5 | RNVC: 2
SYB0315: RNCC: 5 | RNVC: 2
0509420: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-542-9395
Stud Inserter And Remover

145429395
8030011: RNCC: 3 | RNVC: 2
8030011: RNCC: 5 | RNVC: 2

14 Aug 2004

5120-14-462-5867
Tige De Guidage

5120-14-422-9381

5120-14-444-2743

5120-14-442-8276

5120-14-317-7965
Spanner Wrench

143177965
NO PRIMARY REF14-317-7965: RNCC: 3 | RNVC: 2
842865-79: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-349-3850
Coude Defreinoir

143493850
9970-125-726: RNCC: 3 | RNVC: 2

22 May 1978

5120-14-323-2061
Open End Wrench

143232061
16-3-8X7-16: RNCC: 3 | RNVC: 2
522 3-8X7-16: RNCC: 3 | RNVC: 9
DEM522 3-8X7-16: RNCC: 5 | RNVC: 9
85-638-6960: RNCC: 6 | RNVC: 9

1 Jan 1975

5120-14-537-6022
Open End Wrench

145376022
13A-17X19: RNCC: 3 | RNVC: 2

12 Nov 2003

5120-14-302-6699
Open End Wrench

143026699
RACD53: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-334-6948
Electrical Card Extractor

143346948
26045411: RNCC: 3 | RNVC: 2
26045411: RNCC: 3 | RNVC: 9

1 Jun 1976

5120-14-433-1301
Socket Wrench Extension

144331301
M4Z7101967202: RNCC: 3 | RNVC: 2

11 Jul 1989

5120-14-528-4686
Face Spanner Wrench Socket

145284686
888-467-500-1: RNCC: 3 | RNVC: 2
888-467-500-1: RNCC: 5 | RNVC: 2

30 Jan 2002

5120-14-488-3113
Socket Head Screw Key

144883113
82H.3/32: RNCC: 3 | RNVC: 2
0123461: RNCC: 5 | RNVC: 2
3148511234617: RNCC: 5 | RNVC: 2
82H3-32: RNCC: 5 | RNVC: 2
0110695B00: RNCC: 5 | RNVC: 2
0715 311 27: RNCC: 5 | RNVC: 2

30 Apr 1997

5120-14-454-4750
Spanner Wrench

144544750
AM49092: RNCC: 3 | RNVC: 2

2 Apr 1992

5120-14-417-5139
Patin Dappui

144175139
853-100-251-0: RNCC: 3 | RNVC: 2

8 Jul 1987

5120-14-418-9549
Cle De Montage

144189549
NO PRIMARY REF14-418-9549: RNCC: 3 | RNVC: 2
4303: RNCC: 5 | RNVC: 9

21 Sep 1987

5120-14-204-0947
Obus Demmanchement

142040947
3130S95-00-111: RNCC: 3 | RNVC: 2

1 Jan 1963

5120-14-249-0694

5120-14-321-9767
Spanner Wrench

143219767
SPE10S002: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-559-6998
Mechanical Puller

145596998
8815750000: RNCC: 3 | RNVC: 2

6 Feb 2009

5120-14-347-8705

5120-14-451-5373
Socket Wrench Socket

144515373
45056028: RNCC: 3 | RNVC: 2
45056028: RNCC: 5 | RNVC: 9

21 Nov 1991

5120-14-437-0683
Open End Wrench

144370683
11161: RNCC: 3 | RNVC: 2

17 Jan 1990

5120-14-207-5117
Fixed Open End Wrench Set

142075117
NO PRIMARY REF14-207-5117: RNCC: 3 | RNVC: 2
W117TUM: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-466-2438
De Reglage Cle

144662438
M33838-01: RNCC: 3 | RNVC: 2

3 Nov 1993

5120-14-421-0780
Cle Speciale

144210780
6254-57045: RNCC: 3 | RNVC: 2

6 Jan 1988

5120-14-566-5339
Mechanical Puller Attachment

145665339
332A93-3685-23: RNCC: 3 | RNVC: 2

23 Nov 2010

5120-14-415-4734
Spanner Wrench

144154734
4748: RNCC: 3 | RNVC: 2

18 May 1987

5120-14-482-1191
Socket Head Screw Key

144821191
660180: RNCC: 3 | RNVC: 2
1121214F00: RNCC: 5 | RNVC: 2

20 Jun 1996

5120-14-371-9736
Bearing And Bushing Remover

143719736
8813249000: RNCC: 3 | RNVC: 2

5 Aug 1981

5120-14-407-5801
Electrical Contact Inserter

144075801
24972: RNCC: 3 | RNVC: 2

27 Feb 1986

5120-14-505-3049
Bearing And Bushing Inserter And Remover

145053049
50MS061-70: RNCC: 3 | RNVC: 2

18 Mar 1998

5120-14-520-9332
Socket Head Screw Key

145209332
59016523: RNCC: 3 | RNVC: 2
59016523: RNCC: 5 | RNVC: 2

21 Jun 2000

5120-14-569-8408
Lifting Pneumatic Bag

145698408
34-76-00200-00: RNCC: 3 | RNVC: 2

24 Oct 2011

5120-14-265-0485
Spanner Wrench

142650485
330A93-3014-00: RNCC: 3 | RNVC: 2
330A93-3014-0000: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-483-5615
Socket Wrench Screwdriver Attachment

144835615
NO PRIMARY REF14-4835615: RNCC: 3 | RNVC: 2
RXC.20: RNCC: 5 | RNVC: 2
1121733P00: RNCC: 5 | RNVC: 2
91739304: RNCC: 5 | RNVC: 2
0715 113 20: RNCC: 5 | RNVC: 2
0053382: RNCC: 5 | RNVC: 2
0503382: RNCC: 5 | RNVC: 2
3148510533827: RNCC: 5 | RNVC: 2
3148515033827: RNCC: 5 | RNVC: 2

19 Sep 1996

5120-14-231-7338
Electrical Contact Remover

142317338
8500-30: RNCC: 3 | RNVC: 2
91357252: RNCC: 5 | RNVC: 2
8500-30: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-338-4688
Extracteur Poussoir

143384688
PR1-47251: RNCC: 3 | RNVC: 2

6 Nov 1976

5120-14-041-9779
Spanner Wrench

140419779
NO PRIMARY REF14-041-9779: RNCC: 3 | RNVC: 2
229489: RNCC: 5 | RNVC: 9

24 Jul 1976

5120-14-399-8661
Spanner Wrench

143998661
NO PRIMARY REF14-399-8661: RNCC: 3 | RNVC: 2
0L506: RNCC: 5 | RNVC: 9

10 Apr 1985

5120-14-560-1708
Spanner Wrench

145601708
D130844: RNCC: 3 | RNVC: 2

31 Mar 2009

5120-14-415-4736
Contac Verificateur

144154736
6141: RNCC: 3 | RNVC: 2

18 May 1987

5120-14-448-9900
Speciale Cle

144489900
BAZ639194: RNCC: 3 | RNVC: 2

24 Jul 1991

5120-14-490-8652
Brosse

144908652
4051 140 004 093: RNCC: 3 | RNVC: 2
F300 0T 000 4889: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-490-8642
Broche

144908642
4051 060 004 086: RNCC: 3 | RNVC: 2
F300 0T 000 4879: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-289-1466
Tournevis Lame Rond

142891466
T0URNEVISAMAGNETIQUE1-543: RNCC: 3 | RNVC: 2
SYB0318: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-311-7469
Mordache Pour Colle

143117469
6800-1065: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-300-9648
Bearing And Bushing Inserter

143009648
341A93-3506-20: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-422-2335
Spanner Wrench

144222335
0436-01-128000: RNCC: 3 | RNVC: 2

24 Feb 1988

5120-14-527-6503
Spring Inserter And Remover

145276503
888-489-000-1: RNCC: 3 | RNVC: 2

7 Nov 2001

5120-14-437-2020
Spanner Wrench

144372020
095115L: RNCC: 3 | RNVC: 2

23 Jan 1990

5120-14-329-1037
Socket Wrench Spanner Attachment Set

143291037
117.E4: RNCC: 3 | RNVC: 2
117E4: RNCC: 5 | RNVC: 2
3148511340509: RNCC: 5 | RNVC: 2
190218: RNCC: 5 | RNVC: 2
91352497: RNCC: 5 | RNVC: 2
0134050: RNCC: 5 | RNVC: 9
117.E4: RNCC: 5 | RNVC: 9

2 Jul 1975

5120-14-409-5076
Bearing And Bushing Inserter And Remover

144095076
8813696000: RNCC: 3 | RNVC: 2

28 May 1986

5120-14-477-5010
Pliers

144775010
0459999M00: RNCC: 3 | RNVC: 2

7 Sep 1995

5120-14-555-3994
Socket Wrench Screwdriver Attachment

145553994
5856163S00: RNCC: 3 | RNVC: 2

7 Nov 2007

5120-14-387-3082
Mechanical Puller Attachment

143873082
U27D3: RNCC: 3 | RNVC: 2
3148515222603: RNCC: 5 | RNVC: 2

15 Sep 1983

5120-14-292-6764
Pliers

142926764
46493: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-478-4241
Flat Tip Screwdriver Set

144784241
AZH.J4: RNCC: 3 | RNVC: 2
3148515007323: RNCC: 5 | RNVC: 2
1113856A00: RNCC: 5 | RNVC: 2
0500732: RNCC: 5 | RNVC: 9

31 Oct 1995

5120-14-348-8377
Spanner Wrench

143488377
D47702: RNCC: 3 | RNVC: 2

19 Apr 1978

5120-14-573-2428
Open End Wrench

145732428
9007360001: RNCC: 3 | RNVC: 2
3303809007360: RNCC: 5 | RNVC: 2
A251403000174: RNCC: 5 | RNVC: 2

25 Sep 2012

5120-14-442-2415
Extracteur

144422415
PR46877: RNCC: 3 | RNVC: 2

3 Oct 1990

5120-14-385-3425
Bearing And Bushing Inserter

143853425
6802P33-6144-00: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-231-7228
Douille De Cle A Do

142317228
9970-115-297: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-374-6762
Spanner Wrench

143746762
D1512-2228: RNCC: 3 | RNVC: 2

30 Jan 1982

5120-14-433-1365
Socket Wrench Socket

144331365
K.29LA: RNCC: 3 | RNVC: 2
91627163: RNCC: 5 | RNVC: 2
3148510301754: RNCC: 5 | RNVC: 2
0030175: RNCC: 5 | RNVC: 9

11 Jul 1989

5120-14-343-1827
Pose Filet R Broche

143431827
01500610920: RNCC: 3 | RNVC: 2
01556107010: RNCC: 5 | RNVC: 2

16 Jun 1977

5120-14-455-9867
Ensemble Tuyauterie

144559867
NO PRIMARY REF14-455-9867: RNCC: 3 | RNVC: 2
55740: RNCC: 5 | RNVC: 9

11 Jun 1992

5120-14-329-6322
Outillage De Mainti

143296322
M31-041: RNCC: 3 | RNVC: 2
M31-041: RNCC: 5 | RNVC: 9

2 Jul 1975

5120-14-280-2404
Butee Darret

142802404
0229-039-000: RNCC: 3 | RNVC: 2
0229039000MS20: RNCC: 5 | RNVC: 2
0229039000DS20: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-530-0783
Mechanical Puller Adapter

145300783
U.49R2: RNCC: 3 | RNVC: 2
U49R2: RNCC: 5 | RNVC: 2

7 May 2002

5120-14-221-9339
Pince A Sertir

142219339
S0URIAU8137: RNCC: 3 | RNVC: 2
2-03906: RNCC: 5 | RNVC: 2

1 Jan 1966

5120-14-377-2801
Reglage Broche

143772801
TMY20-32-505: RNCC: 3 | RNVC: 2

17 May 1982

5120-14-514-0214
Open End Wrench

145140214
ENFD29159-41X46: RNCC: 3 | RNVC: 2

22 Apr 1999

5120-14-407-2738
Spanner Wrench

144072738
11-831156-50: RNCC: 3 | RNVC: 2

12 Feb 1986

5120-14-267-8260
Open End Wrench

142678260
MAT196-0066F13: RNCC: 3 | RNVC: 2
GSM196-011F16: RNCC: 5 | RNVC: 2
GSM196-11F16: RNCC: 5 | RNVC: 2
MAT196-1234F11: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-391-4262
Combination Box And Open End Wrench Set

143914262
40.JE18: RNCC: 3 | RNVC: 2
3148515284106: RNCC: 5 | RNVC: 2
40JE18: RNCC: 5 | RNVC: 2
91561741: RNCC: 5 | RNVC: 2
0713 301 41: RNCC: 5 | RNVC: 2
FACOM 40JE18: RNCC: 5 | RNVC: 2
0528410: RNCC: 5 | RNVC: 9
958 232 000 001: RNCC: 6 | RNVC: 9

1 Mar 1984

5120-14-335-3731
Electrical Card Extractor

143353731
16332893: RNCC: 3 | RNVC: 2
16332893: RNCC: 3 | RNVC: 9

30 Jun 1976

5120-14-548-8257
Socket Wrench Socket

145488257
SJ.27H: RNCC: 3 | RNVC: 2

15 Feb 2006

5120-14-387-4719
Electrical Card Extractor

143874719
33E903: RNCC: 3 | RNVC: 2

15 Sep 1983

5120-14-302-6710
Socket Wrench Socket

143026710
1768-19: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-457-9773
Bras

144579773
529979: RNCC: 3 | RNVC: 2

2 Oct 1992

5120-14-395-6865

5120-14-290-8623
Masse

142908623
NO PRIMARY REF14-290-8623: RNCC: 3 | RNVC: 2
157417: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-371-5873
Deblocage Axe Outil

143715873
M31-126-10: RNCC: 3 | RNVC: 2

5 Aug 1981

5120-14-418-9861
Outilla De Montage

144189861
27390036-0: RNCC: 3 | RNVC: 2

28 Sep 1987

5120-14-217-5087
Cle Axe Datterrisse

142175087
17-9-54: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-506-9698
Flat Tip And Cross Tip Screwdriver Set

145069698
AJZ.3: RNCC: 3 | RNVC: 2
123M1480: RNCC: 5 | RNVC: 2
3148515004711: RNCC: 5 | RNVC: 2
0UZCA000: RNCC: 6 | RNVC: 9

27 May 1998

5120-14-371-5883
Montage Joint Outil

143715883
MGF099-21: RNCC: 3 | RNVC: 2
MGF099-21: RNCC: 5 | RNVC: 2

5 Aug 1981

5120-14-464-2462
Hand Blind Riveter

144642462
854-500-367-0: RNCC: 3 | RNVC: 2

28 Jul 1993

5120-14-244-4172
Spanner Wrench

142444172
NO PRIMARY REF14-244-4172: RNCC: 3 | RNVC: 2
K7-3: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-521-6340
Socket Wrench Socket

145216340
NO PRIMARY REF14-521-6340: RNCC: 3 | RNVC: 2
JB.7: RNCC: 5 | RNVC: 2
0029121: RNCC: 5 | RNVC: 9

30 Aug 2000

5120-14-384-1381
Mechanical Puller Attachment

143841381
0999186380: RNCC: 3 | RNVC: 2

4 May 1983

5120-14-486-5611
Fausse Cartouche

144865611
RT13644: RNCC: 3 | RNVC: 2

24 Mar 1997

5120-14-375-1783
Spanner Wrench

143751783
16380314: RNCC: 3 | RNVC: 2
16380314: RNCC: 5 | RNVC: 9

26 Feb 1982

5120-14-384-7610
Electrical Card Extractor

143847610
20198019: RNCC: 3 | RNVC: 2
20198019: RNCC: 5 | RNVC: 9

2 Jun 1983

5120-14-396-7173
Socket Head Screw Key

143967173
61788: RNCC: 3 | RNVC: 2

27 Nov 1984

5120-14-220-7909
Open End Wrench

142207909
RACD24: RNCC: 3 | RNVC: 2
RACD24: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-250-0478

5120-14-386-7604

5120-14-490-8738
Cle

144908738
4065 030 000 690: RNCC: 3 | RNVC: 2
F300 0T 000 4987: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-575-6144
Spanner Wrench

145756144
8816038002: RNCC: 3 | RNVC: 2

18 Apr 2013

5120-14-493-0779
Cle

144930779
5P295: RNCC: 3 | RNVC: 2
F300 0T 009 9427: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-304-1852
Auge De Macon

143041852
4764-35L: RNCC: 3 | RNVC: 9
2695 950 030: RNCC: 5 | RNVC: 2

1 Jan 1974

5120-14-406-9512
Entrainement Cle

144069512
853-202-080-0: RNCC: 3 | RNVC: 2

22 Jan 1986

5120-14-322-1349
Oeilleto Adaptateur

143221349
121E95-190-22-0: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-557-1863
Socket Wrench Socket

145571863
RHC-8: RNCC: 3 | RNVC: 9

23 May 2008

5120-14-248-3530
Douille A Ergots

142483530
A90571: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-576-3413
Screw Extractor Set

145763413
NO PRIMARY REF 14-576-3413: RNCC: 3 | RNVC: 2
1536M710: RNCC: 5 | RNVC: 2

13 Jun 2013

5120-14-549-7105
Socket Wrench Screwdriver Attachment

145497105
270M116-00: RNCC: 3 | RNVC: 2

2 May 2006

5120-14-272-3654
Open End Wrench

142723654
E74302C22-23WWW: RNCC: 2 | RNVC: 1

1 Jan 1971

5120-14-556-6331
Hand Beading Tool

145566331
DET05FRKT-RAF1: RNCC: 3 | RNVC: 2

29 Mar 2008

5120-14-397-9461
Monte Extracteu Axe

143979461
131425D: RNCC: 3 | RNVC: 2

31 Jan 1985

5120-14-561-8249
Socket Wrench Socket

145618249
K.34HB: RNCC: 3 | RNVC: 2
659999: RNCC: 5 | RNVC: 2

10 Sep 2009

5120-14-201-2199
Socket Wrench Socket

142012199
0055370: RNCC: 3 | RNVC: 2
S.19L: RNCC: 5 | RNVC: 2
S19L: RNCC: 5 | RNVC: 2
99250300196: RNCC: 5 | RNVC: 2
GESM831430: RNCC: 5 | RNVC: 2

1 Jan 1962

5120-14-557-1861
Socket Wrench Socket

145571861
RHC-6: RNCC: 3 | RNVC: 2

23 May 2008

5120-14-422-0128
Flat Tip Screwdriver

144220128
AC.3,5X250: RNCC: 3 | RNVC: 2
91638785: RNCC: 5 | RNVC: 2
162-7460: RNCC: 5 | RNVC: 2
3148510038353: RNCC: 5 | RNVC: 2
FACOMAC.3,5X250: RNCC: 5 | RNVC: 9
0003835: RNCC: 5 | RNVC: 9

16 Feb 1988

5120-14-475-9384
Adaptateur Cannele

144759384
MAT171-0435F39: RNCC: 3 | RNVC: 2

11 May 1995

5120-14-554-0309
Gravier Rateau

145540309
296374: RNCC: 3 | RNVC: 2

7 Jun 2007

5120-14-501-4836
Socket Wrench Socket

145014836
NO PRIMARY REF14-501-4836: RNCC: 3 | RNVC: 2
NNP5120848427022: RNCC: 5 | RNVC: 9

29 Oct 1997

5120-14-561-1382
Flat Tip And Cross Tip Screwdriver Set

145611382
3148517949218: RNCC: 3 | RNVC: 2
MODM.A1: RNCC: 3 | RNVC: 2
794921: RNCC: 5 | RNVC: 2
A09901823: RNCC: 5 | RNVC: 2
Y00015153: RNCC: 5 | RNVC: 2

19 Jun 2009

5120-14-217-2682

5120-14-208-9868

5120-14-407-1484
Open End Wrench

144071484
F52219-3: RNCC: 3 | RNVC: 2

12 Feb 1986

5120-14-453-7426
Socket Head Screw Key

144537426
0123030: RNCC: 1 | RNVC: 2
45674551: RNCC: 3 | RNVC: 2
3148511230305: RNCC: 5 | RNVC: 2
82-3: RNCC: 5 | RNVC: 2
45674551: RNCC: 5 | RNVC: 9

5 Mar 1992

5120-14-397-8223
Screwdriver Bit

143978223
AM-4MM: RNCC: 3 | RNVC: 2
APEX-AM-4MM: RNCC: 5 | RNVC: 9

31 Jan 1985

5120-14-455-5075
Montage Bague Outil

144555075
SJ150-9000-22: RNCC: 3 | RNVC: 2

26 May 1992

5120-14-400-4976
Spanner Wrench

144004976
RU253-5M362A3B: RNCC: 3 | RNVC: 2
253-5M362A3B: RNCC: 5 | RNVC: 2

24 Apr 1985

5120-14-442-5239
Spanner Wrench

144425239
J23479-453: RNCC: 3 | RNVC: 9
AEDJ23479-453: RNCC: 5 | RNVC: 9

17 Oct 1990

5120-14-370-9011
Outillage De Centra

143709011
6807P32-4003-02: RNCC: 3 | RNVC: 2
6807365A32-4003-02: RNCC: 5 | RNVC: 2

5 Jun 1981

5120-14-510-7704
Socket Wrench Socket

145107704
F97-019-9-03005: RNCC: 3 | RNVC: 2

12 Nov 1998

5120-14-446-1023
Flat Tip Screwdriver

144461023
0005706: RNCC: 3 | RNVC: 2
AG.5,5X200: RNCC: 5 | RNVC: 2
AG5-5X200: RNCC: 5 | RNVC: 2

6 Mar 1991

5120-14-214-9312
Extracteur Du Distr

142149312
60290-01-05-060M1: RNCC: 3 | RNVC: 2
9970-143-082: RNCC: 5 | RNVC: 2

1 Jan 1965

5120-14-423-2294
Basculeur Cle Dyn

144232294
0747169: RNCC: 3 | RNVC: 2
SP.1735 D-3-1180: RNCC: 5 | RNVC: 2
SP1735D-3-1180: RNCC: 5 | RNVC: 2

13 Apr 1988

5120-14-321-1502
Screwdriver Bit

143211502
1002-1: RNCC: 3 | RNVC: 2
85-679-5980: RNCC: 6 | RNVC: 9

1 Jan 1975

5120-14-249-9424
Socket Wrench Socket

142499424
NO PRIMARY REF14-249-9424: RNCC: 3 | RNVC: 2
J.11L: RNCC: 5 | RNVC: 2
J11L: RNCC: 5 | RNVC: 2
101269: RNCC: 5 | RNVC: 2
C66550: RNCC: 5 | RNVC: 2
0028030: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-521-0554
Quick Adjusting Screw Clamp

145210554
272.400L: RNCC: 3 | RNVC: 2
0695 949 40: RNCC: 5 | RNVC: 2

5 Jul 2000

5120-14-391-6456
Pliers

143916456
484: RNCC: 3 | RNVC: 2

21 Mar 1984

5120-14-421-3287
Socket Head Screw Key

144213287
523105: RNCC: 3 | RNVC: 2

14 Jan 1988

5120-14-522-2441
Bearing Staking Installation Tool

145222441
TC3043G001: RNCC: 3 | RNVC: 2
8812809000: RNCC: 5 | RNVC: 2

11 Oct 2000

5120-14-281-1864
Spanner Wrench

142811864
4630: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-383-7229
Socket Head Screw Key

143837229
26199910: RNCC: 3 | RNVC: 9

11 Apr 1983

5120-14-552-1853
Socket Wrench Screwdriver Attachment

145521853
STM.14: RNCC: 3 | RNVC: 2
STM.14: RNCC: 5 | RNVC: 2

30 Nov 2006

5120-14-200-9147
Open End Wrench

142009147
33-8X10: RNCC: 3 | RNVC: 2

1 Jan 1962

5120-14-396-9161
Spanner Wrench

143969161
CMT20E5639PL1REP11: RNCC: 3 | RNVC: 2

27 Nov 1984

5120-14-254-5328
Spanner Wrench

142545328
PR46550: RNCC: 3 | RNVC: 2

1 Jan 1969

5120-14-241-6021

5120-14-390-4840
Emmanche Siege

143904840
DLP750430: RNCC: 3 | RNVC: 2

26 Jan 1984

5120-14-479-4265
Socket Wrench Handle

144794265
7M850: RNCC: 3 | RNVC: 2
M3036M2: RNCC: 3 | RNVC: 2
M3-036-M2: RNCC: 5 | RNVC: 2
M3-036M2: RNCC: 5 | RNVC: 2

10 Jan 1996

5120-14-327-2334
Socket Head Screw Key

143272334
P250A1085: RNCC: 3 | RNVC: 2
P250A1085: RNCC: 5 | RNVC: 2
85-505-6032: RNCC: 6 | RNVC: 9

2 Jul 1975

5120-14-315-1841
Mechanical Puller Attachment

143151841
0-40765-1: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-338-4765
Faux Mor Demi-Coqui

143384765
C46308-1: RNCC: 3 | RNVC: 2

6 Nov 1976

5120-14-483-8614
Bearing And Bushing Remover

144838614
0-65195-4: RNCC: 3 | RNVC: 2

5 Oct 1996

5120-14-393-0294
Combination Box And Open End Wrench

143930294
41.9: RNCC: 3 | RNVC: 2
41.9: RNCC: 5 | RNVC: 2
3148511013564: RNCC: 5 | RNVC: 2
41-9: RNCC: 5 | RNVC: 2

12 Apr 1984

5120-14-318-6236
Spanner Wrench

143186236
C46357-2: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-468-9811
Seal Inserter And Remover

144689811
40N108118-3: RNCC: 3 | RNVC: 2

30 Mar 1994

5120-14-417-0127
Spanner Wrench

144170127
J05107-03S117: RNCC: 3 | RNVC: 2
J05107-03-0000S117: RNCC: 5 | RNVC: 2

25 Jun 1987

5120-14-271-7279
Manche Pioche Bois

142717279
B54514-38A900: RNCC: 2 | RNVC: 2

1 Jan 1970

5120-14-244-4097
Open End Wrench

142444097
10-25X28: RNCC: 3 | RNVC: 2
10-25X28C: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-427-2060
Face Spanner Wrench Socket

144272060
46AM019A: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-318-6461
Wrench Extension Handle

143186461
NP15121-02: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-408-9625
Faux Arbre

144089625
853-201-554-0: RNCC: 3 | RNVC: 2

9 Apr 1986

5120-14-284-7450

5120-14-391-1885
Spanner Wrench

143911885
NO PRIMARY REF14-391-1885: RNCC: 3 | RNVC: 2
322054: RNCC: 5 | RNVC: 9

1 Mar 1984

5120-14-261-8783
Spanner Wrench

142618783
3130S95-63-004: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-378-5708
Etau Support

143785708
UFG302-21: RNCC: 3 | RNVC: 2
UFG302-21: RNCC: 5 | RNVC: 2

11 Aug 1982

5120-14-262-4101
Tournevis Special

142624101
262-10-96103-01: RNCC: 3 | RNVC: 2
NA28-101: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-366-2060
Outillage Dessais

143662060
NO PRIMARY REF14-366-2060: RNCC: 3 | RNVC: 2
231346: RNCC: 5 | RNVC: 9
85-691-2598: RNCC: 6 | RNVC: 9

4 Nov 1980

5120-14-316-9167
Mechanical Puller Adapter

143169167
0761980: RNCC: 3 | RNVC: 2
EMB0UTU51-31: RNCC: 5 | RNVC: 2
U.51B5-9: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-392-0878
Torque Wrench Adapter

143920878
853-100-104-0: RNCC: 3 | RNVC: 2

21 Mar 1984

5120-14-389-2186
Cle A Fourch Embout

143892186
M34015: RNCC: 3 | RNVC: 2
85-692-3943: RNCC: 6 | RNVC: 9

29 Nov 1983

5120-14-536-1200
Mechanical Puller Gear Adapter

145361200
587270: RNCC: 3 | RNVC: 2

9 Jul 2003

5120-14-466-2326
Spanner Wrench

144662326
4289959: RNCC: 3 | RNVC: 2
4289952: RNCC: 5 | RNVC: 2
4289952: RNCC: 5 | RNVC: 9
4289959: RNCC: 5 | RNVC: 9

3 Nov 1993

5120-14-368-6867
Spanner Wrench

143686867
300A96439: RNCC: 3 | RNVC: 2
300A96439: RNCC: 5 | RNVC: 2
91372568: RNCC: 5 | RNVC: 2
300A96439: RNCC: 5 | RNVC: 9
300A96439: RNCC: 5 | RNVC: 9

10 Mar 1981

5120-14-535-2499
Detent Handling Tool

145352499
6501OTT120: RNCC: 3 | RNVC: 2

14 May 2003

5120-14-355-3776
Wrench Kit

143553776
525292: RNCC: 3 | RNVC: 2

19 Mar 1979

5120-14-462-9123
Seal Inserter And Remover

144629123
45057928: RNCC: 3 | RNVC: 2
45057928: RNCC: 5 | RNVC: 9

5 May 1993

5120-14-286-7861

5120-14-281-2923
Adaptateur Bloc Fre

142812923
A0117508: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-299-9981

5120-14-356-2229
Chassoir Conique

143562229
769020104: RNCC: 3 | RNVC: 2
B104: RNCC: 5 | RNVC: 2

25 Apr 1979

5120-14-461-8140
Afficheu Extracteur

144618140
748327: RNCC: 3 | RNVC: 2

29 Mar 1993

5120-14-288-5929

5120-14-306-2403

5120-14-314-6432

5120-14-031-9129
Flat Tip Screwdriver

140319129
ATH300: RNCC: 3 | RNVC: 2

5 Jul 1980

5120-14-454-1537
Screwdriver Bit

144541537
EP.153T: RNCC: 3 | RNVC: 2
3148510241531: RNCC: 5 | RNVC: 2
0024153: RNCC: 5 | RNVC: 9

24 Mar 1992

5120-14-318-6204
Outil A Sertir

143186204
C46418: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-490-6916
Clamp

144906916
241 C 01859 000: RNCC: 3 | RNVC: 2
F300 0T 000 1045: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-544-3758
Cross Tip Screwdriver

145443758
APY.3X150VE: RNCC: 3 | RNVC: 2
APY.3X150VSE: RNCC: 5 | RNVC: 2
AA002630: RNCC: 6 | RNVC: 9

25 Jan 2005

5120-14-551-0161
Socket Wrench Spanner Attachment

145510161
98D32303000000: RNCC: 3 | RNVC: 2

21 Aug 2006

5120-14-455-6597
Sheet Holder Forceps

144556597
1LTU: RNCC: 3 | RNVC: 9

5 Jun 1992

5120-14-434-3024
Secur.Lar Outillage

144343024
605-03-89: RNCC: 3 | RNVC: 2

20 Sep 1989

5120-14-550-1601
Socket Wrench Attachment Universal Joint

145501601
730010S162-00A: RNCC: 3 | RNVC: 2

6 Jun 2006

5120-14-338-3669
Socket Wrench Socket

143383669
61-10-47-01-02: RNCC: 3 | RNVC: 2

6 Nov 1976

5120-14-393-0300
Open End Wrench

143930300
NO PRIMARY REF14-393-0300: RNCC: 3 | RNVC: 2
44-21X23CP: RNCC: 5 | RNVC: 2
91569752: RNCC: 5 | RNVC: 2

12 Apr 1984

5120-14-330-7070
Collier De Maintien

143307070
BR4X532: RNCC: 3 | RNVC: 2
4X532: RNCC: 5 | RNVC: 2
85-100-4940: RNCC: 6 | RNVC: 9

2 Jul 1975

5120-14-306-9712
Carpenters' Pincers

143069712
E73-160-160DEMI-FINE: RNCC: 2 | RNVC: 2
938LI0N: RNCC: 5 | RNVC: 2

1 Jan 1974

5120-14-379-0710
Bearing And Bushing Inserter And Remover

143790710
365A93-3213-20: RNCC: 3 | RNVC: 2

6 Sep 1982

5120-14-431-4816
Socket Head Screw Key

144314816
0372-42-10022: RNCC: 3 | RNVC: 2

19 Apr 1989

5120-14-219-3478
Cle Speciale

142193478
58648: RNCC: 3 | RNVC: 2
V2-95-612: RNCC: 5 | RNVC: 2

1 Jan 1965

5120-14-283-9721
Wrench Extension Handle

142839721
MS654-009: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-471-9920
Combination Box And Open End Wrench Set

144719920
39.JE16T: RNCC: 3 | RNVC: 2
39.JE 16T: RNCC: 5 | RNVC: 2
3148515282348: RNCC: 5 | RNVC: 2
39JE16T: RNCC: 5 | RNVC: 2
0528234: RNCC: 5 | RNVC: 9

28 Sep 1994

5120-14-256-5674
Hand Contact Burnisher

142565674
NO PRIMARY REF14-256-5674: RNCC: 3 | RNVC: 2
2647-4C: RNCC: 5 | RNVC: 9

1 Jan 1969

5120-14-260-8574
Arrache Manchon

142608574
85979: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-219-2223

5120-14-384-7355
Electrical Card Extractor

143847355
NO PRIMARY REF14-384-7355: RNCC: 3 | RNVC: 2
16931494: RNCC: 5 | RNVC: 9

2 Jun 1983

5120-14-281-9834
Cle Speciale

142819834
HK1-54: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-330-7520
Open End Wrench

143307520
CNM69-36: RNCC: 3 | RNVC: 2
85-681-3370: RNCC: 6 | RNVC: 9

2 Jul 1975

5120-14-369-1866
Spanner Wrench

143691866
365A93-3440-22: RNCC: 3 | RNVC: 2

17 Apr 1981

5120-14-379-4433
Socket Wrench Screwdriver Attachment

143794433
A33294P: RNCC: 3 | RNVC: 2

1 Oct 1982

5120-14-364-1576
Spanner Wrench

143641576
19308904: RNCC: 3 | RNVC: 2

7 Aug 1980

5120-14-442-8088
Socket Wrench Socket Set

144428088
GS69C: RNCC: 3 | RNVC: 2
GS69PV: RNCC: 3 | RNVC: 9
GS1110SS: RNCC: 5 | RNVC: 2

6 Nov 1990

5120-14-253-6237
Spanner Wrench

142536237
0225-78: RNCC: 3 | RNVC: 2
RA225: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-326-4137
Electron Tube Extractor

143264137
16412835: RNCC: 3 | RNVC: 2
16412835: RNCC: 3 | RNVC: 9

2 Jul 1975

5120-14-328-9805
Spanner Wrench

143289805
DNAR508REPB35: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-515-8698
Shock Type Wheel Stud Nut Wrench

145158698
521613: RNCC: 3 | RNVC: 2
SOG521613: RNCC: 5 | RNVC: 9

18 Aug 1999

5120-14-451-9719
Screwdriver Bit

144519719
0025205: RNCC: 3 | RNVC: 2
ET.605: RNCC: 5 | RNVC: 2

16 Dec 1991

5120-14-470-6847
Offset Screwdriver

144706847
39605073: RNCC: 3 | RNVC: 2
39605073: RNCC: 5 | RNVC: 2

29 Jun 1994

5120-14-358-3624
Open End Wrench

143583624
522CM6X7: RNCC: 3 | RNVC: 9
DEM522CM6X7: RNCC: 5 | RNVC: 9

13 Aug 1979

5120-14-469-9052
Open End Wrench

144699052
46.13VSE: RNCC: 3 | RNVC: 2
3148511056301: RNCC: 5 | RNVC: 2
0105630: RNCC: 5 | RNVC: 9
MO003154: RNCC: 6 | RNVC: 9

18 May 1994

5120-14-381-6420
Spanner Wrench

143816420
23C9053: RNCC: 3 | RNVC: 2

25 Jan 1983

5120-14-420-4460
Spanner Wrench

144204460
E74323A86NU: RNCC: 2 | RNVC: 2

10 Dec 1987

5120-14-531-5874
Pneumatic Tire Valve Fishing Tool

145315874
23.378: RNCC: 3 | RNVC: 2
023378: RNCC: 5 | RNVC: 2

3 Sep 2002

5120-14-389-9771
Socket Head Screw Key

143899771
065U20-623271S: RNCC: 3 | RNVC: 2

26 Jan 1984

5120-14-373-6764
Open End Wrench

143736764
225765: RNCC: 3 | RNVC: 2

13 Nov 1981

5120-14-552-4885
Socket Wrench Socket

145524885
S639V4001223: RNCC: 3 | RNVC: 2

8 Jan 2007

5120-14-281-1865
Spanner Wrench

142811865
4626: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-363-0013
Spanner Wrench

143630013
195260: RNCC: 3 | RNVC: 2

3 Apr 1980

5120-14-329-6390
Spanner Wrench

143296390
MHJ096-06: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-353-2118
Spanner Wrench

143532118
VDP7525: RNCC: 3 | RNVC: 2

8 Dec 1978

5120-14-040-7357
Fixed Open End Wrench Set

140407357
000145003S: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-456-0342
Emp Carr Cle Coudee

144560342
3599198: RNCC: 3 | RNVC: 2
3599198: RNCC: 5 | RNVC: 2

17 Jun 1992

5120-14-576-5906
Mechanical Puller

145765906
82127999004: RNCC: 3 | RNVC: 2

27 Jun 2013

5120-14-375-2998

5120-14-336-3209

5120-14-293-6174

5120-14-479-3544
Cross Tip Screwdriver

144793544
AZP.1X100: RNCC: 3 | RNVC: 2
W269301000043: RNCC: 5 | RNVC: 2
3148510134451: RNCC: 5 | RNVC: 2
AZP-1X100: RNCC: 5 | RNVC: 2
1092191S00: RNCC: 5 | RNVC: 2
176-0804: RNCC: 5 | RNVC: 2
0013445: RNCC: 5 | RNVC: 9
FACOMAZP.1X100: RNCC: 5 | RNVC: 9

10 Jan 1996

5120-14-332-1538
Open End Wrench

143321538
AR632A: RNCC: 3 | RNVC: 2
2063202: RNCC: 3 | RNVC: 2
PAA632-02: RNCC: 5 | RNVC: 2

2 Jul 1975

5120-14-352-8425
Jeu Jets

143528425
MGA055-22: RNCC: 3 | RNVC: 2
MGA055-22: RNCC: 5 | RNVC: 2

14 Nov 1978

5120-14-427-6437
Torque Wrench Adapter

144276437
10.13: RNCC: 3 | RNVC: 2
0239228Y00: RNCC: 5 | RNVC: 2
10.13: RNCC: 5 | RNVC: 2
10-13: RNCC: 5 | RNVC: 2
3148510925400: RNCC: 5 | RNVC: 2
0092540: RNCC: 5 | RNVC: 9

27 Oct 1988

5120-14-452-2556
Socket Wrench Socket

144522556
R-9/16: RNCC: 3 | RNVC: 2
R9-16: RNCC: 3 | RNVC: 2
3272670226876: RNCC: 5 | RNVC: 2

8 Jan 1992

5120-14-289-4423
Outil Verrouillage

142894423
C21817: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-427-1431
Serrage Cle

144271431
0441MOFA407512: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-552-5166
Socket Wrench Screwdriver Attachment Set

145525166
RSX.19A: RNCC: 3 | RNVC: 2

10 Jan 2007

5120-14-472-6172
Mechanical Puller Attachment

144726172
1G1437+1G1438: RNCC: 3 | RNVC: 9
1G4135B-REP4A+5A: RNCC: 5 | RNVC: 9

4 Nov 1994

5120-14-537-4488
Socket Head Screw Key

145374488
82H.5H0P: RNCC: 3 | RNVC: 2

3 Nov 2003

5120-14-257-0816
Spanner Wrench

142570816
201491C: RNCC: 3 | RNVC: 2

1 Jan 1969

5120-14-442-9489
Flat Tip Screwdriver

144429489
38201266: RNCC: 3 | RNVC: 2
38201266: RNCC: 5 | RNVC: 9

7 Nov 1990

Load More Results