What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.

A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Blacksmith's Punch?

A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Mechanical Finger?

A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.

A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Screwdriver And Wrench Assembly?

A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Stakeholder Bench Plate?

A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.

What is a Drill Drift?

A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.

A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Digging Bar?

A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

What is a Valve Spring Lifter?

A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.

What is a Fuse Puller?

A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.

Hand Tools, Nonedged, Nonpowered - France (FR)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by France (FR) - NCB is 14

Page 10 of 110

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by France

51	20	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - France (FR)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 16 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Pipe Vise? 19 Items: A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.
What is a Hand Vise? 25 Items: A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.
What is a Hand Hydraulic Jack? 133 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 153 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 903 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 17 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
Swage,Bottom,Blacksmith's 10 Items
What is a Hand Tube Flaring Tool? 23 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Blacksmith's Punch? 12 Items: A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.
What is a Drain Plug Wrench? 45 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 57 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 16 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 3829 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
Flatter,Blacksmith's 18 Items
Swage,Top,Blacksmith's 12 Items
What is a Pipe Wrench? 110 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 149 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 53 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
Screwdriver,Offset 54 Items
What is a Screwdriver Bit? 707 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Mechanical Finger? 25 Items: A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.
What is a Socket Wrench Socket? 1803 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 1412 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 1641 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 52 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 565 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
Jack,Push-Pull,Screw 30 Items
What is a Hand Tube Bender? 54 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 1106 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 55 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pinch Bar? 19 Items: A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.
What is a Pry Bar? 17 Items: A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.
What is a Wrecking Bar? 15 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 273 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 413 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 32 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 295 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
Face,Hammer,Inserted 25 Items
What is a Hole Sheet Metal Holder? 37 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Screwdriver And Wrench Assembly? 11 Items: A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.
What is a Hand Rivet Set? 121 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Stakeholder Bench Plate? 22 Items: A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.
What is a Drill Drift? 32 Items: A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.
What is a Tack Claw? 15 Items: A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.
Mattock 28 Items
What is a Socket Wrench Handle Bar? 108 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Stake,Sheet Metalworking 50 Items
Riveter,Blind,Hand 76 Items
What is a Hand Shovel? 43 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 98 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 30 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
What is a Digging Bar? 20 Items: A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.
Block,Dolly,Sheet Metalworking 56 Items
What is a Piston Ring Compressor? 34 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Valve Spring Lifter? 29 Items: A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.
What is a Fuse Puller? 20 Items: A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.
What is a Hand Lead Seal Press? 18 Items: A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.
What is a Hand Beading Tool? 91 Items: A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.
What is a Hand Hammer? 502 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
Head,Hand Hammer 81 Items
What is a Lamp Extractor? 76 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Tube Packing Ring Installing Tool? 29 Items: A Tube Packing Ring Installing Tool (INSTALLING TOOL,TUBE PACKING RING) is an item designed to insert packing rings on tubes within tube sheets on condensers and similar heat exchangers. In operation, the packing rings are assembled on the loading pin mandrel and are then transferred from the mandrel on to the tube by means of a tubular sleeve which slides on the mandrel.
What is a Carpenters' Pincers? 18 Items: A Carpenters' Pincers (PINCERS,CARPENTERS') is a plierlike hand tool having two opposing jaws which may have hammerlike backs. One handle has a nail or tack pulling claw, the other is shaped to form a screwdriver. The tool may contain a wire cutter. See also NIPPERS, END CUTTING and PINCERS, FARRIERS'.
What is a Trowel? 33 Items: A Trowel is a tool used for bricklaying, concrete work, plastering, linoleum laying, and masonry work. Excludes CORNER TOOL, CONCRETE.
What is a Hand Abrasive Wheel Dresser? 12 Items: A Hand Abrasive Wheel Dresser (DRESSER,ABRASIVE WHEEL,HAND) is a tool designed to remove glaze from, dress, shape, sharpen, and true solid abrasive wheels. Excludes NIB, DIAMOND, WHEEL DRESSING.
What is a Lamp Cap Extractor? 32 Items: A Lamp Cap Extractor (EXTRACTOR,LAMP CAP) is a tool specifically designed to facilitate the removal of lamp caps from switchboards, panels or indicator lamps.
What is a Rivet Bucking Bar? 51 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 86 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 277 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Woven Cable Grip? 23 Items: A Woven Cable Grip (GRIP,CABLE,WOVEN) is a braided wire device designed to clutch a bare or insulated conductor, cable or wire rope, for holding taut or drawing through conduit.
What is a Screw Thread Insert Extractor? 19 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is an Electron Tube Extractor? 18 Items: An Electron Tube Extractor (EXTRACTOR,ELECTRON TUBE) is a hand tool designed to facilitate the removal of electron tubes from electronic equipment and to avoid burning the fingers. It may be used for installing tubes.
What is a Cross Tip Screwdriver? 362 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 21 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 11 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 37 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Tool Handle Wedge? 10 Items: A Tool Handle Wedge (WEDGE,TOOL HANDLE) is excludes WEDGE, WOOD.
What is a Marlinespike? 16 Items: A Marlinespike is a metal hand tool made in the shape of a tapered pin. One end is pointed and the opposite end may be headed. The body may contain an eye for a lanyard sling, or be grooved lengthwise. Excludes CABLE PICK and FID.
What is an Aligning Punch? 272 Items: An Aligning Punch (PUNCH,ALIGNING) is a round, square, hexagonal or octagonal bodied hand tool, having a round tapered section 6-1/2 inches (165.1 mm) or more in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, DRIFT and DRIFTPIN.
What is a Drift Punch? 25 Items: A Drift Punch (PUNCH,DRIFT) is a round, square, hexagonal, or octagonal bodied hand tool, having a round tapered section 4 to 6 inches (101.6 mm to 152.4 mm) inclusive in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, ALIGNING; and DRIFTPIN.
What is a Putty Knife? 36 Items: A Putty Knife (KNIFE,PUTTY) is a hand tool with a nonedged blade fixed to a handle for laying on and smoothing putty and the like.
What is a Socket Wrench Adapter-Extension? 40 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 30 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 184 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Socket Wrench Ratchet Attachment? 47 Items: A Socket Wrench Ratchet Attachment (RATCHET ATTACHMENT,SOCKET WRENCH) is a connection for socket wrenches and handles. Consists of a ratcheting mechanism with an internal drive on one end and an external drive on the opposite end of the same size. The item is designed to permit continuous rotation of the socket in one direction without removing the socket or handle and without a complete rotation of the handle.
What is a Wrench Extension Handle? 81 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Socket Wrench Crowfoot Attachment? 155 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 33 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 43 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 48 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 2394 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 372 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 300 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 661 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 32 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand-Operated Grommet And Eyelet Press? 12 Items: A Hand-Operated Grommet And Eyelet Press (PRESS,GROMMET AND EYELET,HAND-OPERATED) is a device which punches or pierces holes and in addition fastens or sets eyelets and grommets in cloth, paper and similar material. May be used for fastening or setting rivets, lacing hooks and snaps in cloth, paper and similar material. It is hand operated by lever or screw action. See also PUNCH, EYELET, PLIER TYPE and PRESS, GROMMET AND EYELET, FOOT OPERATED.
What is a Claw Bar? 19 Items: A Claw Bar (BAR,CLAW) is before using, refer to Reference Drawing Group AG.
What is a Shock Type Wheel Stud Nut Wrench? 11 Items: A Shock Type Wheel Stud Nut Wrench (WRENCH,WHEEL STUD NUT,SHOCK TYPE) is a manually operated item designed to remove wheel stud nuts. In operation the inner nut is turned by a socket attached to a shaft on which is a loose swinging weighted handle. The weighted handle may be swung quickly to provide an impact force against the socket to loosen the seized or jammed nuts. The outer nut is held stationary by a separate hexagonal holding wrench.
What is a Drift Pin Set? 30 Items: A Drift Pin Set is a group of DRIFTPIN having different characteristics.
What is a Tire Iron? 25 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 115 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Blacksmith's Vise? 14 Items: A Blacksmith's Vise (VISE,BLACKSMITH'S) is a clamping device consisting of a mounting plate, one stationary and one manual screw actuated jaw and a supporting member extending downward from the stationary jaw to the floor. Designed to be mounted on a bench, table or the like. May include pipe holding jaws.
What is a Machinist's Vise? 64 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Clamp Base Bench Vise? 10 Items: A Clamp Base Bench Vise (VISE,BENCH,CLAMP BASE) is a clamping device consisting of a base, one stationary and one manual screw actuated jaw, and one or more guide bars or rods. Designed with an integral clamp for attaching to a bench, table, or the like. Does not include pipe holding jaws.
What is a Fixed Open End Wrench Set? 86 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Nail Set? 11 Items: A Nail Set is a round knurled, square, hexagonal or octagonal bodied hand tool having a round tapered section terminating in a cupped point. It is designed to set brad head nails below the surface by striking it a hammerlike blow. See also PUNCH, DRIVE PIN.
What is a Socket Wrench Set? 202 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is an Open End Box Wrench Set? 10 Items: An Open End Box Wrench Set (WRENCH SET,OPEN END BOX) is a group of WRENCH, OPEN END BOX having different characteristics.
What is a Combination Box And Open End Wrench Set? 72 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Box Wrench Set? 36 Items: A Box Wrench Set (WRENCH SET,BOX) is a group of box wrenches having different characteristics. It may include a HANDLE, EXTENSION WRENCH. See also WRENCH SET, COMBINATION, BOX AND OPEN END.
What is a Hot Line Stick? 26 Items: A Hot Line Stick is a hand tool consisting of a straight, round stick (pole) made of a suitable nonconductive material with a tool fixed to one end. The other end may be plain or have a butt mounting device fixed to it. Various types of attachments (hooks, rings, and bands) may be fixed to the body. It is designed for use in the repair and maintenance of live high voltage aerial lines. Excludes hot line sticks without heads.
Handle,Mattock-Pick 15 Items
What is a Wrench Kit? 73 Items: A Wrench Kit is an assortment of various types and sizes of wrenches such as SOCKET, SOCKET WRENCH; WRENCH, OPEN END, FIXED; WRENCH, BOX and the like. It may include adapter(s), ratchet(s) and the like. See also WRENCH SET (as modified.
What is a Brad Awl? 15 Items: A Brad Awl (AWL,BRAD) is a small, pointed tool used by shoemakers, saddlers, cabinetmakers, and the like for piercing small holes in wood, leather, and similar materials, and consists of a handle with a ferrule and a blade. The blade is round, terminating in a beveled, sharp straight edge and has a shank which passes through the center of the handle.
What is a Scratch Awl? 20 Items: A Scratch Awl (AWL,SCRATCH) is an item whose nominal length of blade is less than 4 inches (101.6 millimeters) and is provided with a nondetachable handle.
What is a Screw Extractor Set? 10 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 102 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
Jack,Scissors,Hand 26 Items
What is a Piston Ring Expander? 23 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
Mallet,Plastic 62 Items
Mallet,Rubber 10 Items
What is a Wood Mallet? 37 Items: A Wood Mallet (MALLET,WOOD) is excludes MALLET, CALKING; MALLET, HAWSING and MALLET, SERVING.
What is a Rack Bar Jack? 30 Items: A Rack Bar Jack (JACK,RACK BAR) is excludes JACK, BUMPER and JACK, REEL, HAND.
What is a Pneumatic Tire Valve Core Inserter And Remover? 14 Items: A Pneumatic Tire Valve Core Inserter And Remover (INSERTER AND REMOVER,PNEUMATIC TIRE VALVE CORE) is a bar of steel having a small cylindrical slotted end for removing or installing a valve core in a valve stem by a screwing motion. See also REPAIR TOOL, PNEUMATIC TIRE VALVE.
What is a Hand Tube Swaging Tool Kit? 20 Items: A Hand Tube Swaging Tool Kit (SWAGING TOOL KIT,TUBE,HAND) is a hand-operated noncutting tool consisting of one or more PUNCH, TUBE SWAGING, HAND and a tube flaring bar.
What is a Hand Tube Flaring Punch? 11 Items: A Hand Tube Flaring Punch (PUNCH,TUBE FLARING,HAND) is a noncutting tool having a shaped end or section designed to flare the ends of tubes. One type is designed to flare the ends of tubes against a tube sheet, and another to flare tube ends to mate with tube fittings. Includes punch components of FLARING TOOL, TUBE, HAND.
What is a Hose Strap Band Clamping Tool? 26 Items: A Hose Strap Band Clamping Tool (CLAMPING TOOL,STRAP BAND,HOSE) is an item designed to tension and lock metal straps around a rubber hose, and the like. It is also used to clamp and hold fittings therein.
What is a Mechanical Puller? 3073 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 470 Items
What is a Slip Joint Pliers? 84 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Brake Repair Pliers? 14 Items: A Brake Repair Pliers (PLIERS,BRAKE REPAIR) is a tool having jaws designed for use in brake repair operations, such as removing and replacing items such as keys, springs, and the like. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 226 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 12 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 81 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 56 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 15 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 11 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 29 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Cross Tip Screwdriver Set? 14 Items: A Cross Tip Screwdriver Set (SCREWDRIVER SET,CROSS TIP) is a group of SCREWDRIVER, CROSS TIP having different characteristics.
What is a Spanner Wrench Set? 18 Items: A Spanner Wrench Set (WRENCH SET,SPANNER) is a group of items under WRENCH, SPANNER having different characteristics.
What is a Drive Pin Punch Set? 31 Items: A Drive Pin Punch Set (PUNCH SET,DRIVE PIN) is a group of PUNCH, DRIVE PIN having different characteristics.
What is an Aligning Punch Set? 13 Items: An Aligning Punch Set (PUNCH SET,ALIGNING) is a group of PUNCH, ALIGNING having different characteristics. See also DRIFTPIN SET.
What is a Slugging Type Box Wrench Socket? 16 Items: A Slugging Type Box Wrench Socket (SOCKET,SLUGGING TYPE BOX WRENCH) is an item having a hexagonal external drive at one end, made to fit into the internal hexagonal or 12-point opening of a slugging type box wrench. The opposite end has a single-broached hexagonal opening of the same size as the external drive. The item is designed with extra thick walls to withstand the impact of sledge blows on the driving wrench.
What is a Mechanical Puller Step Plate? 44 Items: A Mechanical Puller Step Plate (STEP PLATE,MECHANICAL PULLER) is a circular disk, flanged to provide a shoulder, and designed to provide a base for the screw point of a PULLER, MECHANICAL when pulling externally mounted bearings, gears, and the like from hollow shafts or housings. It has a concentric, countersunk hole to accommodate the puller screw point.
What is a Solid Center Punch? 79 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Cable Type Ratchet Lever Puller? 20 Items: A Cable Type Ratchet Lever Puller (PULLER,RATCHET LEVER,CABLE TYPE) is an item consisting of a metal frame and ratchet lever reel to which is attached one end of a flexible cable (wire rope). The cable feeds through the fast eye in the metal frame, and may be reeved through a slip hook tackle hook. See also BINDER, LOAD; HOIST, WIRE ROPE and STRETCHER, WIRE.
What is an Electronic Equipment Tuning Wand? 18 Items: An Electronic Equipment Tuning Wand (TUNING WAND,ELECTRONIC EQUIPMENT) is a hand-held rod used in determining the adjustment of the windings of a radio frequency coil. It is made of insulating material with iron on one end and brass on the other end. By inserting the iron end in the coil, the inductance is increased and by inserting the brass end, the inductance is decreased.
What is a Combination Open End And Spanner Wrench? 14 Items: A Combination Open End And Spanner Wrench (WRENCH,OPEN END AND SPANNER,COMBINATION) is a tool having open end wrench characteristics at one end and spanner wrench features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s) at the other end.
What is a Detent Handling Tool? 187 Items: A Detent Handling Tool (HANDLING TOOL,DETENT) is a specially designed handling tool consisting of a rigid bar with a T-handle on one end. The other end is equipped with threads designed to mate the threads of a detent to facilitate inserting or extracting.
What is a Hand Material Handling Hook? 23 Items: A Hand Material Handling Hook (HOOK,MATERIAL HANDLING,HAND) is a hook whose curved end conforms to Style AP1, AP2, AP3 or AP4 of Reference Drawing Group AP. Excludes HOOK, MANHOLE COVER, HAND; HOOK, WIRE BREAKING, HAND; HOOK, ROCK CRUSHER FEEDING, HAND; HOOK, STRAINER REMOVING, HAND and HOOKS, BAG HANDLING, HAND.
What is a Magnetic Retrieving Tool? 11 Items: A Magnetic Retrieving Tool (RETRIEVING TOOL,MAGNETIC) is a hand-operated magnetic device used to locate and pick up metallic articles, such as bolts, nuts, pins, washers, and the like, in confined spaces. It may be rigid, flexible or adjustable. Excludes FINGER, MECHANICAL.
What is a Mechanical Puller Adapter? 78 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Combination Box And Open End Box Wrench? 13 Items: A Combination Box And Open End Box Wrench (WRENCH,BOX AND OPEN END BOX,COMBINATION) is a double end wrench, box and open end box, primarily designed for removing or replacing tube fittings. The opening in the open end box may be machined at an angle from the longitudinal center line of the wrench.
What is a Screw Thread Insert Inserter? 136 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Flat Tip Screwdriver Set? 48 Items: A Flat Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP) is a group of SCREWDRIVER, FLAT TIP having different characteristics.
What is a Terminal Crimping Tool Contact Positioner? 89 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 16 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is an Adjustable Wrench? 138 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 239 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 75 Items
Handle,Shovel 10 Items
What is a Socket Wrench Spanner Attachment? 88 Items: A Socket Wrench Spanner Attachment (SPANNER ATTACHMENT,SOCKET WRENCH) is an item having an adjustable or fixed span with pin, hook, or key type end that is used to fit and turn various size retaining rings, cover plates, plugs, couplings, and like parts. Usually designed to be driven by a male driver.
What is a Retaining Ring Installation Tool? 44 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Tacker? 16 Items: A Tacker is a hand-operated, hammerlike or gunlike item without a clincher, used to drive preformed connecting elements like pins, nails or staples through one object or piece of material into another. Excludes STAPLER (as modified).
What is a Bearing And Bushing Inserter? 290 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 207 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 939 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 14 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 93 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 161 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 94 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 141 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 53 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Six Point Tip Screwdriver? 155 Items: A Six Point Tip Screwdriver (SCREWDRIVER,SIX POINT TIP) is a manual screwdriver having a single nonremoveable blade having a tip with six rounded points.
What is a Seal Inserter And Remover? 147 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 478 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is a Preformed Packing Inserter And Remover? 34 Items: A Preformed Packing Inserter And Remover (INSERTER AND REMOVER,PREFORMED PACKING) is a hand tool designed to install and remove a PACKING, PREFORMED.
What is a Pin Remover? 34 Items: A Pin Remover (REMOVER,PIN) is a hand tool designed to facilitate the removal of a pin from a hole.
What is a Pin Inserter And Remover? 13 Items: A Pin Inserter And Remover (INSERTER AND REMOVER,PIN) is a rodlike tool designed to facilitate the insertion and removal of a pin from a hole.
What is an Electrical Contact Inserter And Remover? 37 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Piston Inserter? 40 Items: A Piston Inserter (INSERTER,PISTON) is a tool designed to permit installation of a piston or piston assembly without damaging the packings or piston.
What is a Spring Inserter And Remover? 85 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 13 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Stud Inserter? 22 Items: A Stud Inserter (INSERTER,STUD) is a device designed to drive in studs. It does not have any facilities for removing or extracting studs. See also INSERTER AND REMOVER, STUD.
What is a Stud Inserter And Remover? 17 Items: A Stud Inserter And Remover (INSERTER AND REMOVER,STUD) is a group of items designed to extract and to drive studs. It may include collets, guides, housings, holders and the like. See also REMOVER SET, STUD and INSERTER, STUD.
What is a Gear Inserter? 54 Items: A Gear Inserter (INSERTER,GEAR) is a hand tool designed to install various gears onto a gearshaft. It may be operated by a pushing or a striking force.
What is a Crimping Tool Die? 73 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is an Electrical Connector Inserter? 45 Items: An Electrical Connector Inserter (INSERTER,ELECTRICAL CONNECTOR) is a hand tool designed to hold an electrical connector, and to assist in the positioning and installation of the connector on a cover, panel or the like.
What is a Float? 12 Items: A Float is a tool used for concrete, plastering and grouting work.
What is a Mechanical Puller Set? 19 Items: A Mechanical Puller Set (PULLER SET,MECHANICAL) is two or more separate PULLER, MECHANICAL of different fixed sizes.
What is a Lifting Pneumatic Bag? 11 Items: A Lifting Pneumatic Bag (PNEUMATIC BAG,LIFTING) is a device made of flexible material designed to lift another item by being placed under the item and being inflated with air or some other gas. It will have a means of being connected to an air or gas source and may include a connector hose, a control valve and/or a pressure regulator.
What is a Cable Tie Installation Tool? 22 Items: A Cable Tie Installation Tool (INSTALLATION TOOL,CABLE TIE) is a lightweight, hand-held, hand-operated tool designed to fasten cable ties, straps and the like. Cable tie is inserted into the nose of the tool flush to the cable tie head. Trigger handle tightens cable tie and cuts off any excess. These installation tools are available in a variety of sizes depending on their intended use with miniature, intermediate, standard, heavy or extra heavy cross section ties.
What is a Bearing Staking Installation Tool? 159 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
Wrench Set,Ratchet 15 Items
What is a Sealant Dispenser? 26 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Retaining Ring Pliers Set? 10 Items: A Retaining Ring Pliers Set (PLIERS SET,RETAINING RING) is a group of PLIERS, RETAINING RING having different characteristics.
What is a Hand Armament Subsystem Carrier? 52 Items: A Hand Armament Subsystem Carrier (CARRIER,ARMAMENT SUBSYSTEM,HAND) is a metallic item with a clamp device and/or space for depositing articles. It is used for transporting weapon parts during maintanence and/or repair work, such as gun barrel, automatic loader, breechblock and the like.
What is a Ring Retaining Pliers Tip Set? 13 Items: A Ring Retaining Pliers Tip Set (TIP SET,PLIERS,RING RETAINING) is a collection of removable metallic tips in matched pairs used to provide various size capablities to PLIERS, RING RETAINING which permits the removal and installation of internal and external retaining rings.
What is a Plug Electrical Connector Extractor? 45 Items: A Plug Electrical Connector Extractor (EXTRACTOR,ELECTRICAL CONNECTOR,PLUG) is a hand tool designed to disassemble CONNECTOR, PLUG, ELECTRICAL from a CONNECTOR, RECEPTACLE, ELECTRICAL.
What is a Torque Wrench Adapter Set? 10 Items: A Torque Wrench Adapter Set (ADAPTER SET,TORQUE WRENCH) is tWO or more ADAPTER, TORQUE WRENCH of different sizes.
What is an Electronic Component Inserter And Remover? 79 Items: An Electronic Component Inserter And Remover (INSERTER AND REMOVER,ELECTRONIC COMPONENT) is an item which can insert or remove an electronic component package such as MICROCIRCUIT; RESISTOR, NETWORK (as modified); and the like from its mounting position or socket. Excludes INSERTER AND REMOVER, ELECTRICAL CONTACT; REMOVER, ELECTRICAL CONTACT; EXTRACTOR, ELECTRICAL CARD; EXTRACTOR, ELECTRONIC CRYSTAL UNIT; EXTRACTOR, ELECTRON TUBE.
What is an Impact Type Bit Set And Handle Screwdriver? 14 Items: An Impact Type Bit Set And Handle Screwdriver (SCREWDRIVER,BIT SET AND HANDLE,IMPACT TYPE) is an item consisting of a set of screwdriver bits and a impact driver to accommodate the bits of various types and characteristics. It is designed to transmit a strong rotating movement by the impact of a hammer blowed on the impact driver. It is used to loosen rusted or seized screws. Excludes SCREWDRIVER, BIT SET AND HANDLE.
What is a Hand Vise Jaw? 19 Items: A Hand Vise Jaw (JAW,VISE,HAND) is an item consisting of two opposing parts of a VISE, HAND. The item is moveable and able to open and close. It can hold, grasp or clamp work.
What is a Screwdriver Handle? 28 Items: A Screwdriver Handle (HANDLE,SCREWDRIVER) is an item used to accommodate various types of BIT, SCREWDRIVER. It is designed to rotate a bit that is used for installing or removing screws.
What is a Wire Twister Pliers? 25 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 284 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is a Mechanical Puller Body? 45 Items: A Mechanical Puller Body (BODY,PULLER,MECHANICAL) is an item designed to support and enclose the internal parts of a PULLER,MECHANICAL.
What is a Flat Tip And Cross Tip Screwdriver Set? 39 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is a Socket Wrench Screwdriver Attachment Set? 22 Items: A Socket Wrench Screwdriver Attachment Set (SCREWDRIVER ATTACHMENT SET,SOCKET WRENCH) is a set of screwdriver attachment, socket wrench of different sizes. Items consist of a female square drive on one end to attach to a handle, socket wrench and various screwdriver tip configurations on the opposite end. Excludes SCREWDRIVER ATTACHMENT,SOCKET WRENCH
What is an Oil Filter Wrench? 44 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 430 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Communications Equipment Spring Adjuster? 13 Items: A Communications Equipment Spring Adjuster (ADJUSTER,SPRING,COMMUNICATIONS EQUIPMENT) is a single or double end tool, equipped with slot(s) of various dimensions or with cylindrical rod(s), used for adjusting the springs or spring tensioned parts of electronic equipment.
What is a Rotating Members Aligning Tool? 32 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
What is a Final Drive Assembly Alignment Pin? 41 Items: A Final Drive Assembly Alignment Pin (ALIGNMENT PIN,FINAL DRIVE ASSEMBLY) is a special designed pin used in the assembling of the final drive.
Arm,Handling Tool 77 Items
What is a Splicing Sleeve Compressing Tool? 23 Items: A Splicing Sleeve Compressing Tool (COMPRESSING TOOL,SPLICING SLEEVE) is a hand tool having hinged leverage handles similar to a CUTTER, BOLT or pliers, designed to compress a splicing sleeve when joining the ends of two conductors, or when forming an eye splice in the end of a wire rope. Excludes CRIMPING TOOL, TERMINAL, HAND.
What is a Hand Screw Jack Extension? 14 Items: A Hand Screw Jack Extension (EXTENSION,HAND SCREW JACK) is a length of externally threaded rigid shafting which is the adjustable section of a JACK, SCREW, HAND.
What is a Mechanical Puller Gear Adapter? 21 Items: A Mechanical Puller Gear Adapter (GEAR ADAPTER,PULLER,MECHANICAL) is an adapter that adapts a PULLER,MECHANICAL, to pull a certain gear.
Handle,Hydraulic Jack 18 Items
What is a Female Electrical Contact Resizing Tool? 11 Items: A Female Electrical Contact Resizing Tool (RESIZING TOOL,FEMALE ELECTRICAL CONTACT) is a tool designed to shape to a specific size, female contacts such as those used on electrical connectors, tube sockets, crystal sockets, and pin jacks.
What is a Screwdriver And Socket Wrench Combination? 13 Items: A Screwdriver And Socket Wrench Combination is a hand-tool formed into an integral unit with a socket wrench at one end and a screwdriver bit at the other end. See also SCREWDRIVER AND WRENCH ASSEMBLY.
What is a Hand Hose Fitting Swaging Tool Kit? 11 Items: A Hand Hose Fitting Swaging Tool Kit (SWAGING TOOL KIT,HOSE FITTING,HAND) is a device, hydraulically actuated by hand or power operated pump, consisting of face plate, adapter plate, finger cages, fingers, ram, bushing, and expanding mandrels combined on a single base in various functional arrangements. It is used for swaging the outside diameter of hose assembly fittings, expanding the inside diameter of hose assemblies, and securing the fabrication of hose assemblies. Included are a hand or power operated pump, lubricant, cases, and trays.
What is a Catch Lever Tool? 12 Items: A Catch Lever Tool (LEVER TOOL,CATCH) is a specially designed hand tool which engages the opening and closing lever of a CATCH (as modified) for ease of operation. It is constructed of thin rigid material, usually flat, and one end has an engaging tongue.
What is a Manual Impact Wrench? 11 Items: A Manual Impact Wrench (WRENCH,IMPACT,MANUAL) is a manually operated handheld tool consisting of spring-loaded handle and a power-impact head which delivers a torsional impact from either continuous movement of the handle in one direction, or by a reciprocating action. It is used in tightening and loosening fasteners, such as bolts, nuts, and the like. The item may include sockets, extensions and offset fittings, nut runners, and the like.
What is a Drift? 63 Items: A Drift is an item consisting of a tubular body fitted with replaceable tips. It is designed to insert or remove mechanical components where space is restricted.
What is a Nutdriver? 46 Items: A Nutdriver is a non-powered hand tool with a screwdriver style handle, shaft and formed female hex or square socket at driving end.
What is a Locking Device Removal Tool? 12 Items: A Locking Device Removal Tool (REMOVAL TOOL,LOCKING DEVICE) is a hand tool designed to facilitate the removal of a WASHER, KEY and a LOCKING PLATE, NUT AND BOLT.
What is a Hydraulic Fitting Crimping Tool Head? 26 Items: A Hydraulic Fitting Crimping Tool Head (HEAD,CRIMPING TOOL,HYDRAULIC FITTING) is a component of a crimping tool used to compress fittings on fluid tubes. It consists of a U-shape item, in which, are mounted different sizes of DIE, CRIMPING TOOL for tubes of various diameters.
What is a Torque Screwdriver? 11 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.
What is a Special Purpose Combination Wrench? 13 Items: A Special Purpose Combination Wrench (WRENCH,COMBINATION,SPECIAL PURPOSE) is a tool having a combination of ends and facets. The ends may have open end, box or spanner characteristics. The sides may have features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s). Designed to fit specific items, not sized as standard or metric.
What is a Screwdriver Bit Holder? 56 Items: A Screwdriver Bit Holder (HOLDER,SCREWDRIVER BIT) is an attachment with a socket end for accepting male hexagon shank insert bits and a drive end for adapting to a portable power or hand tool.
What is a Telescoping Pole? 16 Items: A Telescoping Pole (POLE,TELESCOPING) is an item which is designed to be extended or compressed by the sliding of overlapping sections. This item may or may not be able to accommodate an extension.

Stock Items From Supply Class 5120 Page 10 of 110

5120-14-284-3306
Pinch Bar

142843306
149-100: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-485-8832
Socket Wrench

144858832
K7739-12111-1PX1P1/8WW: RNCC: 3 | RNVC: 2
12111-1PX1P1/8WW: RNCC: 5 | RNVC: 2

19 Feb 1997

5120-14-355-3460
Mechanical Puller

143553460
330A93-2022-00: RNCC: 3 | RNVC: 2

19 Mar 1979

5120-14-469-5609
Mechanical Puller

144695609
1176-112-000: RNCC: 3 | RNVC: 2
0217865P00: RNCC: 5 | RNVC: 2
1176-112-000: RNCC: 5 | RNVC: 2

3 May 1994

5120-14-438-0733
Mechanical Puller

144380733
025-1219-78: RNCC: 3 | RNVC: 2

7 Mar 1990

5120-14-429-5085
Mechanical Puller

144295085
007224080P: RNCC: 3 | RNVC: 2

27 Jan 1989

5120-14-462-9835
Aligning Punch

144629835
T700A2799000014: RNCC: 3 | RNVC: 2

12 May 1993

5120-14-432-7180
Seal Inserter

144327180
OUT50099: RNCC: 3 | RNVC: 2
0UT50099: RNCC: 5 | RNVC: 2

21 Jun 1989

5120-14-555-6015
Mechanical Puller

145556015
71050015: RNCC: 3 | RNVC: 2
14079: RNCC: 5 | RNVC: 2
0014079: RNCC: 5 | RNVC: 2

30 Nov 2007

5120-14-361-8470
Mechanical Puller

143618470
8812941300: RNCC: 3 | RNVC: 2

20 Feb 1980

5120-14-425-6008
Plastic Mallet

144256008
212A.50: RNCC: 3 | RNVC: 2
212A50: RNCC: 5 | RNVC: 2
3148511484807: RNCC: 5 | RNVC: 2
2695 491 000: RNCC: 5 | RNVC: 2
0148480: RNCC: 5 | RNVC: 9

12 Jul 1988

5120-14-467-6740
Seal Inserter

144676740
2000-7565: RNCC: 3 | RNVC: 2

21 Jan 1994

5120-14-433-5497
Mechanical Puller

144335497
M4Z6021942801: RNCC: 3 | RNVC: 2

2 Aug 1989

5120-14-201-5654
Scratch Awl

142015654
NO PRIMARY REF14-201-5654: RNCC: 3 | RNVC: 2
109-6M: RNCC: 5 | RNVC: 9

1 Jan 1962

5120-14-425-5980
Hand Hammer

144255980
202A.1'1/2: RNCC: 3 | RNVC: 2
202A1-1-2: RNCC: 5 | RNVC: 2
202A.1"1/2: RNCC: 5 | RNVC: 2
3148511467459: RNCC: 5 | RNVC: 2
0146745: RNCC: 5 | RNVC: 9

12 Jul 1988

5120-14-249-9488
Open End Box Wrench

142499488
42-22X24: RNCC: 3 | RNVC: 2
130407: RNCC: 5 | RNVC: 2
3148511017005: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-441-2284
Socket Wrench

144412284
6803M10-0015-21: RNCC: 3 | RNVC: 2

22 Aug 1990

5120-14-250-6461
Open End Box Wrench

142506461
552-000MA316DET25: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-464-4881
Rivet Bucking Bar

144644881
851-910-007-0: RNCC: 3 | RNVC: 2

4 Aug 1993

5120-14-216-0726
Machinist's Scriber

142160726
73-31: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-358-5709
Mechanical Puller

143585709
79915: RNCC: 3 | RNVC: 2
530140: RNCC: 5 | RNVC: 2

7 Sep 1979

5120-14-483-5991
Box Wrench

144835991
19207389: RNCC: 3 | RNVC: 2

19 Sep 1996

5120-14-354-9005
Mechanical Puller

143549005
D47738: RNCC: 3 | RNVC: 2

20 Feb 1979

5120-14-470-7082
Lamp Cap Extractor

144707082
0UT74A: RNCC: 3 | RNVC: 2
OUT74A: RNCC: 5 | RNVC: 2

29 Jun 1994

5120-14-524-4190
Mechanical Puller

145244190
6501EAP: RNCC: 3 | RNVC: 2

16 Mar 2001

5120-14-277-1174
Hand Hammer

142771174
000287006M: RNCC: 3 | RNVC: 2
D2604-57: RNCC: 3 | RNVC: 2
D2604-57: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-523-4625
Paint Strainer

145234625
167-024: RNCC: 3 | RNVC: 2

23 Jan 2001

5120-14-455-0074
Hand Rivet Set

144550074
853-600-349-6: RNCC: 3 | RNVC: 2

1 May 1992

5120-14-480-2659
Drill Guide

144802659
888-398-200-1: RNCC: 3 | RNVC: 2

28 Feb 1996

5120-14-329-6381
Box Wrench

143296381
MHC228-21: RNCC: 3 | RNVC: 2
MHC228-21-00: RNCC: 5 | RNVC: 2

2 Jul 1975

5120-14-390-6070
Hand Tube Bender

143906070
102-F-06: RNCC: 3 | RNVC: 2

26 Jan 1984

5120-14-530-6375
Seal Inserter

145306375
D47691R2: RNCC: 3 | RNVC: 2

1 Jul 2002

5120-14-303-6310
Box Wrench

143036310
0D2-22: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-425-5868
Friction Igniter

144255868
CRI-CRI ELECTRONIQUE: RNCC: 3 | RNVC: 2

9 Jul 1988

5120-14-396-0594
Seal Inserter

143960594
219905: RNCC: 3 | RNVC: 2

27 Nov 1984

5120-14-393-0467
Ratchet Wrench

143930467
364: RNCC: 3 | RNVC: 2

12 Apr 1984

5120-14-552-0056
Drive Pin Punch

145520056
249.G12: RNCC: 3 | RNVC: 2
3148511594599: RNCC: 3 | RNVC: 2
249.G12: RNCC: 5 | RNVC: 2

17 Nov 2006

5120-14-372-6026
Socket Wrench

143726026
1014: RNCC: 3 | RNVC: 2

21 Sep 1981

5120-14-461-0119
Socket Wrench Set

144610119
J.430A: RNCC: 3 | RNVC: 2
3148515043901: RNCC: 5 | RNVC: 2
J.430D: RNCC: 5 | RNVC: 2
J430D: RNCC: 5 | RNVC: 2
91720079: RNCC: 5 | RNVC: 2
0504390: RNCC: 5 | RNVC: 9

17 Feb 1993

5120-14-485-4136
Spatula

144854136
91M71: RNCC: 3 | RNVC: 2

23 Jan 1997

5120-14-235-3924
Hand Hammer

142353924
M0B342EC: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-391-6520
Mechanical Puller

143916520
483-0: RNCC: 3 | RNVC: 2

21 Mar 1984

5120-14-549-6661
Jaw Cable Grip

145496661
630138006: RNCC: 3 | RNVC: 2

26 Apr 2006

5120-14-377-0867
Mechanical Puller

143770867
D98: RNCC: 3 | RNVC: 2
3148510197050: RNCC: 5 | RNVC: 2

28 Apr 1982

5120-14-260-3611
Seal Inserter

142603611
3160-95-33-128: RNCC: 3 | RNVC: 2
3160S95-33-128: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-469-9063
Socket Wrench

144699063
72.10VSE: RNCC: 3 | RNVC: 2
3148511167823: RNCC: 5 | RNVC: 2
0116800: RNCC: 5 | RNVC: 9

18 May 1994

5120-14-436-7334
Lamp Extractor

144367334
21331007-00: RNCC: 3 | RNVC: 2
85-694-1404: RNCC: 6 | RNVC: 9

3 Jan 1990

5120-14-440-3401
Mechanical Puller

144403401
F46843: RNCC: 3 | RNVC: 2

11 Jul 1990

5120-14-359-0453
Socket Wrench

143590453
75.1': RNCC: 3 | RNVC: 2
3148511204405: RNCC: 5 | RNVC: 2
75-1: RNCC: 5 | RNVC: 2
75.1': RNCC: 5 | RNVC: 2
0120440: RNCC: 5 | RNVC: 9

7 Sep 1979

5120-14-264-0591
Ratchet Screwdriver

142640591
963: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-543-4556
Nutdriver

145434556
D.133A6: RNCC: 3 | RNVC: 2

3 Nov 2004

5120-14-336-7579
C Clamp

143367579
0410-17: RNCC: 3 | RNVC: 2

7 Oct 1976

5120-14-042-3485
Drill Guide

140423485
170694-70-A4: RNCC: 3 | RNVC: 2

16 Jun 1977

5120-14-200-3987
Socket Wrench

142003987
41CLE4301: RNCC: 3 | RNVC: 2

1 Jan 1962

5120-14-201-1920
Ratchet Wrench

142011920
M150M120: RNCC: 3 | RNVC: 2

1 Jan 1962

5120-14-321-5483
Socket Wrench

143215483
3122105: RNCC: 3 | RNVC: 2
90-5: RNCC: 3 | RNVC: 2
3272670232815: RNCC: 5 | RNVC: 2
CLE TUBE 5MM: RNCC: 5 | RNVC: 9
VIR3122105: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-425-9523
Aligning Punch

144259523
500424STH20R2: RNCC: 3 | RNVC: 2

28 Jul 1988

5120-14-542-9389
Piston Inserter

145429389
8430003: RNCC: 3 | RNVC: 2
8430003: RNCC: 5 | RNVC: 2

14 Aug 2004

5120-14-281-7596
Mechanical Puller

142817596
A125881: RNCC: 3 | RNVC: 2
100161: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-450-5453
Socket Wrench Set

144505453
K.300-3: RNCC: 3 | RNVC: 2
0506762: RNCC: 5 | RNVC: 2
3148515067624: RNCC: 5 | RNVC: 2
K300-3: RNCC: 5 | RNVC: 2
91712236: RNCC: 5 | RNVC: 2

9 Oct 1991

5120-14-438-9591
Mechanical Puller

144389591
330A98-2037-0081: RNCC: 3 | RNVC: 2

11 Apr 1990

5120-14-460-0199
Pipe Wrench

144600199
CLEASANGLE138X48-SERT-7059: RNCC: 3 | RNVC: 2

7 Jan 1993

5120-14-292-1759
Box Wrench

142921759
62-24X26: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-510-8287
Mechanical Puller

145108287
60001D2262-211: RNCC: 3 | RNVC: 2
60001D2262-211: RNCC: 5 | RNVC: 2

18 Nov 1998

5120-14-431-2574
Mechanical Puller

144312574
332A93-3225-00: RNCC: 3 | RNVC: 2

12 Apr 1989

5120-14-369-6961
Socket Wrench

143696961
BB208: RNCC: 3 | RNVC: 9

17 Apr 1981

5120-14-457-8122
Ratchet Wrench

144578122
400795: RNCC: 3 | RNVC: 2

24 Sep 1992

5120-14-530-8551
Socket Wrench Set

145308551
516601: RNCC: 3 | RNVC: 2
S.441UP: RNCC: 5 | RNVC: 2
3148515166013: RNCC: 5 | RNVC: 2

9 Jul 2002

5120-14-373-4916
Socket Wrench

143734916
216029: RNCC: 3 | RNVC: 2

21 Oct 1981

5120-14-319-9823
Driftpin

143199823
3CGF98-2: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-550-9850
Drive Pin Punch Set

145509850
7-TR5A: RNCC: 3 | RNVC: 2

9 Aug 2006

5120-14-204-9258
Socket Wrench

142049258
56-5X7: RNCC: 3 | RNVC: 2

1 Jan 1963

5120-14-534-6539
Hand Shovel

145346539
660027: RNCC: 3 | RNVC: 2

1 Apr 2003

5120-14-363-2853
Hand Screw Jack

143632853
48408SM: RNCC: 3 | RNVC: 2
T3037BH1: RNCC: 5 | RNVC: 2

3 Apr 1980

5120-14-504-4353
C Clamp

145044353
708106: RNCC: 3 | RNVC: 2

17 Feb 1998

5120-14-421-2057
Pipe Wrench

144212057
120-1/2: RNCC: 3 | RNVC: 2
634-1/2: RNCC: 3 | RNVC: 2
3148511345009: RNCC: 5 | RNVC: 2
3272670230927: RNCC: 5 | RNVC: 9

6 Jan 1988

5120-14-411-9139
Mechanical Puller

144119139
14-18-998-0R: RNCC: 3 | RNVC: 2
14189980R: RNCC: 3 | RNVC: 2

16 Sep 1986

5120-14-405-8958
Ratchet Wrench

144058958
72233: RNCC: 3 | RNVC: 2

12 Dec 1985

5120-14-459-8134
Hand Hammer

144598134
12573: RNCC: 3 | RNVC: 2

17 Dec 1992

5120-14-288-2016
Socket Wrench

142882016
J023: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-486-2186
Socket Wrench Set

144862186
76.JN10: RNCC: 3 | RNVC: 2
3148515324451: RNCC: 5 | RNVC: 2
76JN10: RNCC: 5 | RNVC: 2
2695 612 10: RNCC: 5 | RNVC: 2
0532445: RNCC: 5 | RNVC: 9

5 Mar 1997

5120-14-455-5974
Spanner Wrench Set

144555974
MEH188: RNCC: 3 | RNVC: 2
89231095: RNCC: 5 | RNVC: 2

28 May 1992

5120-14-280-9673
Hand Hammer Head

142809673
430-600: RNCC: 3 | RNVC: 2
0430600201: RNCC: 5 | RNVC: 2
SYQ0895: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-256-7264
Hand Rivet Set

142567264
M0B228-7: RNCC: 3 | RNVC: 2
1532-7: RNCC: 5 | RNVC: 2

1 Jan 1969

5120-14-416-1828
Ratchet Wrench

144161828
3671500: RNCC: 3 | RNVC: 2

3 Jun 1987

5120-14-508-1094
Socket Wrench

145081094
A09010405: RNCC: 3 | RNVC: 2
A09010405: RNCC: 5 | RNVC: 9

26 Aug 1998

5120-14-273-7013
Hand Hammer Head

142737013
208-30: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-204-9257
Socket Wrench Set

142049257
74JL7: RNCC: 3 | RNVC: 2

1 Jan 1963

5120-14-552-5326
Socket Wrench

145525326
66A.16X17: RNCC: 3 | RNVC: 2

12 Jan 2007

5120-14-457-3598
Mechanical Puller

144573598
45056046: RNCC: 3 | RNVC: 2
45056046: RNCC: 5 | RNVC: 9

27 Aug 1992

5120-14-237-9824
Mechanical Puller

142379824
DS3003: RNCC: 3 | RNVC: 2
0000330509: RNCC: 5 | RNVC: 2
0000330509: RNCC: 5 | RNVC: 9
330509: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-400-8810
Driftpin

144008810
16039804: RNCC: 3 | RNVC: 2
16039804: RNCC: 5 | RNVC: 9

21 May 1985

5120-14-434-7778
Seal Inserter

144347778
EM650-461-502A: RNCC: 3 | RNVC: 2
EM650-461-502A: RNCC: 5 | RNVC: 9

4 Oct 1989

5120-14-434-6040
Hand Hammer

144346040
0200550301: RNCC: 3 | RNVC: 2
200-55EC: RNCC: 3 | RNVC: 2

26 Sep 1989

5120-14-463-0645
Socket Wrench

144630645
2-50415: RNCC: 3 | RNVC: 2

17 May 1993

5120-14-328-4924
Mechanical Puller

143284924
911MA0004F4: RNCC: 3 | RNVC: 2
911MA004F4: RNCC: 5 | RNVC: 2

2 Jul 1975

5120-14-400-6413
Hand Hammer

144006413
208-26ENX: RNCC: 3 | RNVC: 2

8 May 1985

5120-14-369-6963
Socket Wrench

143696963
BB211: RNCC: 3 | RNVC: 9

17 Apr 1981

5120-14-441-4781
Hand Vise

144414781
61645000: RNCC: 3 | RNVC: 2

29 Aug 1990

5120-14-443-7375
Socket Wrench

144437375
1537000F: RNCC: 3 | RNVC: 2
91601385: RNCC: 5 | RNVC: 2

5 Dec 1990

5120-14-479-4344
Mechanical Puller

144794344
5521763-8: RNCC: 3 | RNVC: 2

10 Jan 1996

5120-14-539-1823
Aligning Punch Set

145391823
S670V4001101: RNCC: 3 | RNVC: 2

9 Dec 2003

5120-14-425-9525
Aligning Punch

144259525
500426WTH20R2: RNCC: 3 | RNVC: 2

28 Jul 1988

5120-14-352-0833
Mechanical Puller

143520833
341A93-3126-20: RNCC: 3 | RNVC: 2

16 Oct 1978

5120-14-406-1226
Socket Wrench

144061226
006292222P: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-396-1782
Socket Wrench

143961782
5000029805: RNCC: 3 | RNVC: 2

27 Nov 1984

5120-14-541-1617
Hand Screw Jack

145411617
ETAP0508: RNCC: 3 | RNVC: 2
3155031600068: RNCC: 5 | RNVC: 2

14 May 2004

5120-14-307-8804
Mechanical Puller

143078804
330A98-3011-00: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-382-6780
Mechanical Puller

143826780
8810546900: RNCC: 3 | RNVC: 2

17 Feb 1983

5120-14-316-5004
Mechanical Puller

143165004
0U50133: RNCC: 3 | RNVC: 2
50133: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-532-3418
Crimping Tool Die

145323418
58266-1: RNCC: 3 | RNVC: 2

30 Oct 2002

5120-14-434-3284
Seal Inserter

144343284
EM304-929-101A: RNCC: 3 | RNVC: 2
EM304-929-101A: RNCC: 5 | RNVC: 9

20 Sep 1989

5120-14-354-9000
Mechanical Puller

143549000
D47696: RNCC: 3 | RNVC: 2

20 Feb 1979

5120-14-434-3244
Seal Inserter

144343244
EMH139389B: RNCC: 3 | RNVC: 2
EMH139389B: RNCC: 5 | RNVC: 9

20 Sep 1989

5120-14-382-9507
Mechanical Puller

143829507
SV1230: RNCC: 3 | RNVC: 2
1230: RNCC: 3 | RNVC: 2
5000261013: RNCC: 5 | RNVC: 2
5000261230: RNCC: 5 | RNVC: 2
1230: RNCC: 5 | RNVC: 9
SV1230: RNCC: 5 | RNVC: 9
5000261013: RNCC: 5 | RNVC: 9
5000261230: RNCC: 5 | RNVC: 9

17 Mar 1983

5120-14-414-0201
Lamp Extractor

144140201
89099146: RNCC: 3 | RNVC: 2
800P4: RNCC: 5 | RNVC: 2

22 Jan 1987

5120-14-206-8006
Backing Out Punch

142068006
0227060610: RNCC: 3 | RNVC: 2
M0B227-6: RNCC: 3 | RNVC: 2
107CHASSERIVET6: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-555-5939
Hand Hydraulic Jack

145555939
5010643042: RNCC: 3 | RNVC: 2

29 Nov 2007

5120-14-405-4368
Hand Hydraulic Jack

144054368
RC53: RNCC: 3 | RNVC: 9
RC53: RNCC: 5 | RNVC: 2

27 Nov 1985

5120-14-269-1535
Socket Wrench Set

142691535
74JU20: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-417-1016
Backing Out Punch

144171016
536620: RNCC: 3 | RNVC: 2

1 Jul 1987

5120-14-432-7326
Seal Inserter

144327326
NO PRIMARY REF14-432-7326: RNCC: 3 | RNVC: 2
0U139373: RNCC: 5 | RNVC: 9
OU139373: RNCC: 5 | RNVC: 9

21 Jun 1989

5120-14-458-5360
Mechanical Puller

144585360
45215405: RNCC: 3 | RNVC: 2
45215405: RNCC: 5 | RNVC: 9

23 Oct 1992

5120-14-421-3474
Drive Pin Punch

144213474
537555: RNCC: 3 | RNVC: 2

14 Jan 1988

5120-14-462-9122
Gear Inserter

144629122
45057926: RNCC: 3 | RNVC: 2
45057926: RNCC: 5 | RNVC: 9

5 May 1993

5120-14-040-2932
Mechanical Puller

140402932
0520-78: RNCC: 3 | RNVC: 2
RA520: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-421-2065
Basin Wrench

144212065
2614550: RNCC: 3 | RNVC: 2

6 Jan 1988

5120-14-274-8335
Blacksmiths' Tongs

142748335
3813-30: RNCC: 3 | RNVC: 9

1 Jan 1971

5120-14-407-6238
Box Wrench

144076238
54A.36: RNCC: 3 | RNVC: 2
109-36: RNCC: 3 | RNVC: 2
3148511106204: RNCC: 5 | RNVC: 2
3272670239722: RNCC: 5 | RNVC: 2
0110620: RNCC: 5 | RNVC: 9
54-36: RNCC: 5 | RNVC: 9

27 Feb 1986

5120-14-513-3948
Mechanical Puller

145133948
NO PRIMARY REF14-513-3948: RNCC: 3 | RNVC: 2
NNP 5120860356413: RNCC: 5 | RNVC: 9

17 Mar 1999

5120-14-501-7309
Mechanical Puller

145017309
888-445-000-1: RNCC: 3 | RNVC: 2

5 Nov 1997

5120-14-404-1102
Socket Wrench

144041102
80-21-P: RNCC: 3 | RNVC: 2
80-21P: RNCC: 3 | RNVC: 2
3272670302785: RNCC: 5 | RNVC: 2
80-21CP: RNCC: 5 | RNVC: 9

11 Sep 1985

5120-14-458-5870
Socket Wrench Set

144585870
DLP512331: RNCC: 3 | RNVC: 2

27 Oct 1992

5120-14-380-6789
Mechanical Puller

143806789
NO PRIMARY REF14-380-6789: RNCC: 3 | RNVC: 2
21D8090: RNCC: 5 | RNVC: 9

29 Nov 1982

5120-14-317-1847
Socket Wrench

143171847
1721: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-555-7448
Catch Lever Tool

145557448
19228117: RNCC: 3 | RNVC: 2

11 Dec 2007

5120-14-349-4055
Mechanical Puller

143494055
M31-105: RNCC: 3 | RNVC: 2

22 May 1978

5120-14-333-6021
Jaw Cable Grip

143336021
J05791-01-1000P019: RNCC: 3 | RNVC: 2
38883-1C1: RNCC: 5 | RNVC: 2

2 Jul 1975

5120-14-385-3361
Mechanical Puller

143853361
365A93-3342-00: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-438-9585
Mechanical Puller

144389585
330A97-2103-00: RNCC: 3 | RNVC: 2

11 Apr 1990

5120-14-285-4848
Box Wrench

142854848
100 13-16X7-8: RNCC: 3 | RNVC: 2
100-13-16X7-8: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-291-1247
Socket Wrench

142911247
66-11X13: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-298-7910
Hand Shovel

142987910
4747-29-4752: RNCC: 3 | RNVC: 9

1 Jan 1973

5120-14-340-3052
Mechanical Puller

143403052
C1-46939: RNCC: 3 | RNVC: 2

14 Feb 1977

5120-14-527-8175
Mechanical Puller

145278175
888-499-200-1: RNCC: 3 | RNVC: 2

21 Nov 2001

5120-14-343-9856
Box Wrench

143439856
9970-115-563: RNCC: 3 | RNVC: 2
85-689-5622: RNCC: 6 | RNVC: 9

13 Jul 1977

5120-14-527-8181
Seal Inserter

145278181
888-500-800-1: RNCC: 3 | RNVC: 2

21 Nov 2001

5120-14-201-2935
Hand Hammer

142012935
NO PRIMARY REF14-201-2935: RNCC: 3 | RNVC: 2
IBISM: RNCC: 5 | RNVC: 9

1 Jan 1962

5120-14-458-6212
Open End Box Wrench

144586212
853-100-292-0: RNCC: 3 | RNVC: 2

29 Oct 1992

5120-14-438-6680
Drill Guide

144386680
8-8D4-2-156: RNCC: 3 | RNVC: 2
89280156: RNCC: 5 | RNVC: 2
8-8D4-2-156: RNCC: 5 | RNVC: 9

28 Mar 1990

5120-14-301-5365
Socket Wrench

143015365
72-45: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-040-3041
Box Wrench

140403041
NO PRIMARY REF14-040-3041: RNCC: 3 | RNVC: 2
RT8596: RNCC: 5 | RNVC: 9
RT8596C: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-511-3841
Mechanical Puller

145113841
MGB096-27: RNCC: 3 | RNVC: 2
MGB096-27: RNCC: 5 | RNVC: 2

16 Dec 1998

5120-14-456-4060
Seal Inserter

144564060
851-290-025-0: RNCC: 3 | RNVC: 2

2 Jul 1992

5120-14-461-1951
Box Wrench

144611951
51-110: RNCC: 3 | RNVC: 2

2 Mar 1993

5120-14-465-4648
Seal Inserter

144654648
851-500-072-0: RNCC: 3 | RNVC: 2

30 Sep 1993

5120-14-272-5545
Ratchet Wrench

142725545
NO PRIMARY REF14-272-5545: RNCC: 3 | RNVC: 2
1036-21: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-527-8238
Seal Inserter

145278238
888-517-400-1: RNCC: 3 | RNVC: 2

21 Nov 2001

5120-14-352-2984
Open End Box Wrench

143522984
104-N-29X32: RNCC: 3 | RNVC: 2
104N29X32: RNCC: 3 | RNVC: 2
3272670302204: RNCC: 5 | RNVC: 2
104N29X32: RNCC: 5 | RNVC: 2

16 Oct 1978

5120-14-528-6620
Mechanical Puller

145286620
W1POURPOMPE2.6L/1.6L: RNCC: 3 | RNVC: 2
SYB4482: RNCC: 5 | RNVC: 2
W1POURPOMPE2.6L/1.6: RNCC: 5 | RNVC: 2

4 Feb 2002

5120-14-344-8720
Jaw Cable Grip

143448720
SBDS16-8-4SILIC0NE: RNCC: 3 | RNVC: 2
EC66E08-05: RNCC: 3 | RNVC: 9

9 Sep 1977

5120-14-416-1041
Drive Pin Punch

144161041
6-50: RNCC: 3 | RNVC: 2

3 Jun 1987

5120-14-462-9081
Mechanical Puller

144629081
45056359: RNCC: 3 | RNVC: 2
45056359: RNCC: 5 | RNVC: 9

5 May 1993

5120-14-479-0334
Mechanical Puller

144790334
888-350-500-1: RNCC: 3 | RNVC: 2

6 Dec 1995

5120-14-406-5701
Mechanical Puller

144065701
853-200-730-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-457-9994
Socket Wrench

144579994
NO PRIMARY REF14-457-9994: RNCC: 3 | RNVC: 2
302-C26066-7: RNCC: 5 | RNVC: 9
302-C26066-7: RNCC: 5 | RNVC: 9

2 Oct 1992

5120-14-214-3492
Socket Wrench

142143492
103034: RNCC: 3 | RNVC: 2
2036-17: RNCC: 5 | RNVC: 2

1 Jan 1965

5120-14-295-2050
Open End Box Wrench

142952050
103-22X24: RNCC: 3 | RNVC: 2
103L: RNCC: 5 | RNVC: 2
21537: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-402-8567
Tool Handle Wedge

144028567
4-24X27: RNCC: 3 | RNVC: 2
6970-27: RNCC: 3 | RNVC: 2

19 Jul 1985

5120-14-254-0604
Box Wrench

142540604
MAT196-0066F3: RNCC: 3 | RNVC: 2
MAT196-1234F5: RNCC: 3 | RNVC: 2
GSM196-011F6: RNCC: 5 | RNVC: 2
GSM196-11F6: RNCC: 5 | RNVC: 2

1 Jan 1969

5120-14-445-8690
Hand Beading Tool

144458690
D12825-012-56: RNCC: 3 | RNVC: 2

27 Feb 1991

5120-14-446-8360
Plastic Mallet

144468360
0534760: RNCC: 3 | RNVC: 2
207-32AA: RNCC: 5 | RNVC: 2
207A.32AA: RNCC: 5 | RNVC: 2
207A32AA: RNCC: 5 | RNVC: 2
3148511473412: RNCC: 5 | RNVC: 2

17 Apr 1991

5120-14-297-1120
Mechanical Puller

142971120
1039-758C500: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-265-4561
C Clamp

142654561
13-2BIS140: RNCC: 2 | RNVC: 2
450-140: RNCC: 3 | RNVC: 2
3870-140: RNCC: 3 | RNVC: 9
3272670229389: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-525-9502
Ratchet Wrench

145259502
888-434-600-1: RNCC: 3 | RNVC: 2

20 Jun 2001

5120-14-527-7163
Mechanical Puller

145277163
888-492-200-1: RNCC: 3 | RNVC: 2

14 Nov 2001

5120-14-280-1208
Mechanical Puller

142801208
3511 960 11751: RNCC: 3 | RNVC: 2
3511-960-11751: RNCC: 5 | RNVC: 2
MQ01175: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-446-1000
Mechanical Puller

144461000
853-100-272-0: RNCC: 3 | RNVC: 2

6 Mar 1991

5120-14-249-3930
Aligning Punch

142493930
3210-95-34-001-1: RNCC: 3 | RNVC: 2
08-315: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-501-7824
Hand Hammer

145017824
NO PRIMARY REF14-501-7824: RNCC: 3 | RNVC: 2
241 S 03728 000: RNCC: 5 | RNVC: 9
1J 006 01 01210: RNCC: 5 | RNVC: 9
1J 006 01 01230: RNCC: 5 | RNVC: 9
1J 006 02 12060: RNCC: 5 | RNVC: 9
F300 0T 000 1152: RNCC: 6 | RNVC: 9

10 Nov 1997

5120-14-508-4735
Open End Box Wrench

145084735
42.7/16X1/2: RNCC: 3 | RNVC: 2
0101770: RNCC: 5 | RNVC: 2
3148511017708: RNCC: 5 | RNVC: 2
CAE00887: RNCC: 5 | RNVC: 2

14 Sep 1998

5120-14-441-9940
Mechanical Puller

144419940
J7775-A: RNCC: 3 | RNVC: 9
AEDJ7775-A: RNCC: 5 | RNVC: 9

26 Sep 1990

5120-14-417-0999
Mechanical Puller

144170999
530501: RNCC: 3 | RNVC: 2

1 Jul 1987

5120-14-354-2127
Socket Wrench

143542127
6742-13: RNCC: 3 | RNVC: 2

30 Jan 1979

5120-14-242-2397
Hand Hammer

142422397
E71-014-42EMMANCHE: RNCC: 2 | RNVC: 2
200A.42: RNCC: 3 | RNVC: 2
E71-013-42EMMANCHE: RNCC: 5 | RNVC: 2
200A-42: RNCC: 5 | RNVC: 2
3148511463307: RNCC: 5 | RNVC: 2
91720101: RNCC: 5 | RNVC: 2
2695 502 100: RNCC: 5 | RNVC: 2
0146330: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-485-8814
Socket Wrench

144858814
K7739-12110: RNCC: 3 | RNVC: 2
12110: RNCC: 5 | RNVC: 2

19 Feb 1997

5120-14-479-0338
Aligning Punch

144790338
888-356-700-1: RNCC: 3 | RNVC: 2

6 Dec 1995

5120-14-518-2723
Hand Hammer

145182723
0138600301: RNCC: 3 | RNVC: 2
SYQ0643: RNCC: 5 | RNVC: 2
1386003: RNCC: 5 | RNVC: 2
138-71 EMMANCHE HICKORY: RNCC: 5 | RNVC: 2

1 Feb 2000

5120-14-533-3431
Mechanical Puller

145333431
ER0528416: RNCC: 3 | RNVC: 2
SYQ2087: RNCC: 5 | RNVC: 2

30 Jan 2003

5120-14-525-0863
Seal Inserter

145250863
GD3105137-00: RNCC: 3 | RNVC: 2
SYB2770: RNCC: 5 | RNVC: 2

18 May 2001

5120-14-401-7376
Driftpin

144017376
59816-9HHDSZSM4: RNCC: 3 | RNVC: 2

13 Jun 1985

5120-14-471-7061
Open End Box Wrench

144717061
70A.13/16: RNCC: 3 | RNVC: 2
3148511167144: RNCC: 5 | RNVC: 2
0116714: RNCC: 5 | RNVC: 9

13 Sep 1994

5120-14-330-1944
Box Wrench

143301944
100-5,5X7: RNCC: 3 | RNVC: 2
100-5-5X7: RNCC: 5 | RNVC: 2
3272670215276: RNCC: 5 | RNVC: 2

2 Jul 1975

5120-14-412-2425
Mechanical Puller

144122425
4A421-422W26H5: RNCC: 3 | RNVC: 9
4A421-422W26H5: RNCC: 3 | RNVC: 9
4A421-422W26H5: RNCC: 5 | RNVC: 2
4A-421/422-W26H5: RNCC: 5 | RNVC: 9
4A421/422W26H5: RNCC: 5 | RNVC: 9
85-692-5709: RNCC: 6 | RNVC: 9

8 Oct 1986

5120-14-278-7930
Box Wrench

142787930
E29-071-12DR0ITE: RNCC: 2 | RNVC: 2

1 Jan 1971

5120-14-329-6310
Box Wrench

143296310
M31-012: RNCC: 3 | RNVC: 2
M31-012: RNCC: 5 | RNVC: 9

2 Jul 1975

5120-14-427-0962
Mechanical Puller

144270962
540495: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-256-7257
Box Wrench

142567257
100-22X24: RNCC: 3 | RNVC: 2
3272670297395: RNCC: 5 | RNVC: 2

1 Jan 1969

5120-14-404-1185
Box Wrench

144041185
09P636: RNCC: 3 | RNVC: 2

11 Sep 1985

5120-14-322-5410
Box Wrench

143225410
50.32: RNCC: 3 | RNVC: 2
3148511065808: RNCC: 5 | RNVC: 2
50-32: RNCC: 5 | RNVC: 2
0106580: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-402-6642
Socket Wrench

144026642
7701401729: RNCC: 3 | RNVC: 2

19 Jul 1985

5120-14-399-6587
Screw Extractor

143996587
288K: RNCC: 3 | RNVC: 2

6 Mar 1985

5120-14-362-6828
Screw Extractor

143626828
9970-123-108: RNCC: 3 | RNVC: 2

19 Mar 1980

5120-14-533-0219
Mechanical Puller

145330219
899214: RNCC: 3 | RNVC: 2

17 Jan 2003

5120-14-229-3311
Socket Wrench

142293311
22468: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-432-7222
Seal Inserter

144327222
OUT50159-3: RNCC: 3 | RNVC: 2
0UT50159-3: RNCC: 5 | RNVC: 2

21 Jun 1989

5120-14-448-0008
Mechanical Puller

144480008
299408T: RNCC: 3 | RNVC: 2

12 Jun 1991

5120-14-246-7834
Hand Nail Puller

142467834
4610: RNCC: 3 | RNVC: 9

1 Jan 1968

5120-14-523-8139
Machinist's Vise

145238139
FACOM 1222.100: RNCC: 3 | RNVC: 2

2 Feb 2001

5120-14-522-8867
Mechanical Puller

145228867
46007938: RNCC: 3 | RNVC: 2
8023916K00: RNCC: 5 | RNVC: 2

6 Dec 2000

5120-14-455-0147
Seal Inserter

144550147
151017: RNCC: 3 | RNVC: 2

1 May 1992

5120-14-464-4976
Plier Clamp

144644976
854-640-002-0: RNCC: 3 | RNVC: 2

4 Aug 1993

5120-14-527-7132
Mechanical Puller

145277132
888-487-000-1: RNCC: 3 | RNVC: 2

14 Nov 2001

5120-14-323-2068
Open End Box Wrench

143232068
103-9X10: RNCC: 3 | RNVC: 2
85-611-8830: RNCC: 6 | RNVC: 9

1 Jan 1975

5120-14-302-5041
Socket Wrench

143025041
NO PRIMARY REF14-302-5041: RNCC: 3 | RNVC: 2
42-27-04-014: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-280-3991
Socket Wrench

142803991
520149: RNCC: 3 | RNVC: 2
155657: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-498-9350
Hand Hammer

144989350
S836: RNCC: 3 | RNVC: 2
S836: RNCC: 5 | RNVC: 9
F300 0T 012 8913: RNCC: 6 | RNVC: 9

29 Oct 1997

5120-14-368-3709
Drive Pin Punch

143683709
710-6: RNCC: 3 | RNVC: 2
71006: RNCC: 5 | RNVC: 2

20 Feb 1981

5120-14-435-7210
Box Wrench

144357210
W-604: RNCC: 3 | RNVC: 9

21 Nov 1989

5120-14-546-1453
Box Wrench

145461453
46MS056-14-3: RNCC: 3 | RNVC: 2

15 Jun 2005

5120-14-274-8336
Blacksmiths' Tongs

142748336
3813-40: RNCC: 3 | RNVC: 9

1 Jan 1971

5120-14-543-0882
Socket Wrench

145430882
C4-00507: RNCC: 3 | RNVC: 2

21 Aug 2004

5120-14-279-5893
Ratchet Wrench

142795893
13-62A62TER29: RNCC: 2 | RNVC: 2
323-10DR0ITEETGAUCHE29: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-469-0398
Scratch Awl

144690398
665-12: RNCC: 3 | RNVC: 2
665.12: RNCC: 3 | RNVC: 2
3272670254756: RNCC: 5 | RNVC: 2

5 Apr 1994

5120-14-439-9997
Multiposition Vise

144399997
57T: RNCC: 3 | RNVC: 2
91360587: RNCC: 5 | RNVC: 2
DOL57T: RNCC: 5 | RNVC: 9

29 Jun 1990

5120-14-358-3629
Machinist's Vise

143583629
58: RNCC: 3 | RNVC: 2
SAM58: RNCC: 5 | RNVC: 9

13 Aug 1979

5120-14-444-7315
Hand Scissors Jack

144447315
5C487.00: RNCC: 3 | RNVC: 2
7700754042: RNCC: 5 | RNVC: 2
5C442.00: RNCC: 5 | RNVC: 2
F300 0T 002 9454: RNCC: 6 | RNVC: 9

21 Jan 1991

5120-14-424-5263
Mechanical Puller

144245263
7M479: RNCC: 3 | RNVC: 2

26 May 1988

5120-14-515-8824
Mechanical Puller

145158824
12701006: RNCC: 3 | RNVC: 2

23 Aug 1999

5120-14-326-2768
Mechanical Puller

143262768
330A98-2116-00: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-516-2654
Seal Inserter

145162654
TA5042G001: RNCC: 3 | RNVC: 2

15 Sep 1999

5120-14-508-7305
Seal Inserter

145087305
300A96776R2: RNCC: 3 | RNVC: 2
300A96776R2: RNCC: 5 | RNVC: 2

29 Sep 1998

5120-14-219-8886
Socket Wrench

142198886
5000499027: RNCC: 3 | RNVC: 2
0948700054: RNCC: 5 | RNVC: 2
0948700054: RNCC: 5 | RNVC: 9
948700054: RNCC: 5 | RNVC: 9
949700054: RNCC: 5 | RNVC: 9
5000499027: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-511-3867
C Clamp

145113867
271A.150L: RNCC: 3 | RNVC: 2
3148511627815: RNCC: 5 | RNVC: 2
162781: RNCC: 5 | RNVC: 2
2695 415 150: RNCC: 5 | RNVC: 2

16 Dec 1998

5120-14-422-0193
Open End Box Wrench

144220193
42.8X10: RNCC: 3 | RNVC: 2
3148511016206: RNCC: 5 | RNVC: 2
91355347: RNCC: 5 | RNVC: 2
91634461: RNCC: 5 | RNVC: 2
0714 238 10: RNCC: 5 | RNVC: 2
0101620: RNCC: 5 | RNVC: 9

17 Feb 1988

5120-14-363-6023
Mechanical Puller

143636023
U1141CF2: RNCC: 2 | RNVC: 2

9 May 1980

5120-14-280-4151
Mechanical Puller

142804151
A127912: RNCC: 3 | RNVC: 2
100206: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-513-6187
Hand Hammer

145136187
1SH41722222: RNCC: 3 | RNVC: 2
MQ-60A: RNCC: 6 | RNVC: 9

30 Mar 1999

5120-14-460-0198
Hand Hammer

144600198
120001-SERT-7058: RNCC: 3 | RNVC: 2

7 Jan 1993

5120-14-377-3003
Open End Box Wrench

143773003
MH010-21-00: RNCC: 3 | RNVC: 2
MH010-21-00: RNCC: 5 | RNVC: 2

17 May 1982

5120-14-468-2349
Hand Beading Tool

144682349
7M586: RNCC: 3 | RNVC: 2

16 Feb 1994

5120-14-534-3243
Ratchet Wrench

145343243
NNM0010032643288: RNCC: 2 | RNVC: 2

19 Mar 2003

5120-14-382-2458
Socket Wrench

143822458
0013560: RNCC: 3 | RNVC: 2
B.14R3: RNCC: 5 | RNVC: 2
B14R3: RNCC: 5 | RNVC: 2

25 Jan 1983

5120-14-040-2904
Socket Wrench

140402904
RT452: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-530-0959
Sealant Dispenser

145300959
97001: RNCC: 3 | RNVC: 2
1122471L00: RNCC: 5 | RNVC: 2

14 May 2002

5120-14-466-4433
Mechanical Puller

144664433
45527284: RNCC: 3 | RNVC: 2
45527284: RNCC: 5 | RNVC: 9

5 Nov 1993

5120-14-373-5109
Stud Inserter

143735109
52640910000: RNCC: 3 | RNVC: 2
526409100: RNCC: 5 | RNVC: 2
526409100: RNCC: 5 | RNVC: 9

21 Oct 1981

5120-14-520-9670
Seal Inserter

145209670
9937353: RNCC: 3 | RNVC: 9

27 Jun 2000

5120-14-438-0965
Mechanical Puller

144380965
NO PRIMARY REF14-438-0965: RNCC: 3 | RNVC: 2
398610: RNCC: 5 | RNVC: 9
398610: RNCC: 5 | RNVC: 9

7 Mar 1990

5120-14-388-9902
Hand Screw Jack

143889902
054-502-000: RNCC: 3 | RNVC: 2

29 Nov 1983

5120-14-269-2334
Box Wrench

142692334
50.100: RNCC: 3 | RNVC: 2
108-100: RNCC: 3 | RNVC: 2
119-100: RNCC: 3 | RNVC: 9
3148511072608: RNCC: 5 | RNVC: 2
50-100: RNCC: 5 | RNVC: 2
3272670223028: RNCC: 5 | RNVC: 2
0107260: RNCC: 5 | RNVC: 9
DEM119-100: RNCC: 5 | RNVC: 9

1 Jan 1970

5120-14-343-9658
Open End Box Wrench

143439658
37 3-4X13-16: RNCC: 3 | RNVC: 2
85-647-3360: RNCC: 6 | RNVC: 9

13 Jul 1977

5120-14-348-1878
Driftpin

143481878
F46053: RNCC: 3 | RNVC: 2

29 Mar 1978

5120-14-395-6880
Box Wrench

143956880
853-100-116-0: RNCC: 3 | RNVC: 2

30 Oct 1984

5120-14-465-9539
Prick Punch

144659539
480-01Z00ST011-003: RNCC: 3 | RNVC: 2
06-1964-03: RNCC: 5 | RNVC: 2
G6-1964-03: RNCC: 5 | RNVC: 2
G6-1964-3: RNCC: 5 | RNVC: 2

21 Oct 1993

5120-14-200-8514
Socket Wrench

142008514
91-22X23-160X10: RNCC: 3 | RNVC: 2

1 Jan 1962

5120-14-380-3980
Mechanical Puller

143803980
68936-951-2: RNCC: 3 | RNVC: 9
85-691-7016: RNCC: 6 | RNVC: 9

8 Nov 1982

5120-14-273-7000
Hand Hammer Head

142737000
E71-015-800: RNCC: 2 | RNVC: 2
200-40: RNCC: 3 | RNVC: 2
0294000: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-410-3844
Mechanical Puller

144103844
15737-518: RNCC: 3 | RNVC: 2

18 Jun 1986

5120-14-397-0882
Mechanical Puller

143970882
8812827000: RNCC: 3 | RNVC: 2

1 Dec 1984

5120-14-419-2621
Driftpin

144192621
530649: RNCC: 3 | RNVC: 2

16 Oct 1987

5120-14-343-4554
Lamp Cap Extractor

143434554
57149T0UCHEE: RNCC: 3 | RNVC: 9
57149: RNCC: 5 | RNVC: 9

16 Jun 1977

5120-14-292-1950
Socket Wrench Set

142921950
K.442E: RNCC: 3 | RNVC: 2
K442E: RNCC: 5 | RNVC: 2
91481928: RNCC: 5 | RNVC: 2
91634368: RNCC: 5 | RNVC: 2
3148515075001: RNCC: 5 | RNVC: 2
0507500: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-291-8023
Socket Wrench

142918023
02640051500: RNCC: 3 | RNVC: 2
026400515: RNCC: 5 | RNVC: 2
204864: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-235-3895
Blacksmiths' Tongs

142353895
32-500: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-432-7228
Seal Inserter

144327228
OUT50160-3: RNCC: 3 | RNVC: 2
0UT50160-3: RNCC: 5 | RNVC: 2

21 Jun 1989

5120-14-270-5482
Hand Hammer

142705482
326: RNCC: 3 | RNVC: 9

1 Jan 1970

5120-14-307-3552
Box Wrench

143073552
57.14X16: RNCC: 3 | RNVC: 2
3148511133200: RNCC: 5 | RNVC: 2
57-14X16: RNCC: 5 | RNVC: 2
0113320: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-381-4352
Socket Wrench

143814352
7700620767: RNCC: 3 | RNVC: 2
7700620767: RNCC: 3 | RNVC: 2

25 Jan 1983

5120-14-555-3643
Ratchet Wrench

145553643
64.10X11: RNCC: 3 | RNVC: 2
742442: RNCC: 3 | RNVC: 2
3148517424425: RNCC: 5 | RNVC: 2

31 Oct 2007

5120-14-265-4558
C Clamp

142654558
13-2BIS60: RNCC: 2 | RNVC: 2

1 Jan 1970

5120-14-323-4468
Socket Wrench

143234468
M16-033: RNCC: 3 | RNVC: 2
M16-033: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-458-8431
Rivet Bucking Bar

144588431
851-910-057-0: RNCC: 3 | RNVC: 2

5 Nov 1992

5120-14-509-7569
Mechanical Puller

145097569
U16-45: RNCC: 3 | RNVC: 2
0714 52 32: RNCC: 5 | RNVC: 2

5 Nov 1998

5120-14-302-2617
Putty Knife

143022617
K-30: RNCC: 3 | RNVC: 2
S51: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-400-7173
Spanner Wrench Set

144007173
2904-593010-593020-593030: RNCC: 3 | RNVC: 2

8 May 1985

5120-14-471-8264
Stud Remover

144718264
287B.7: RNCC: 3 | RNVC: 2
0165610: RNCC: 5 | RNVC: 2
287A.7: RNCC: 5 | RNVC: 2
287A7: RNCC: 5 | RNVC: 2
3148511656112: RNCC: 5 | RNVC: 2

20 Sep 1994

5120-14-298-7812
Hand Shovel

142987812
E2: RNCC: 3 | RNVC: 9

1 Jan 1973

5120-14-552-7395
Socket Wrench

145527395
92A.5: RNCC: 3 | RNVC: 2
92A.5: RNCC: 5 | RNVC: 2

26 Jan 2007

5120-14-409-7202
Seal Inserter

144097202
OUT50108-1: RNCC: 3 | RNVC: 2
0UT50108-1: RNCC: 5 | RNVC: 2

28 May 1986

5120-14-410-0092
Mechanical Puller

144100092
0-52308-1: RNCC: 3 | RNVC: 2

4 Jun 1986

5120-14-249-9485
Open End Box Wrench

142499485
29X32S: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-456-6078
Hand Hammer

144566078
293-4: RNCC: 3 | RNVC: 2
293.4: RNCC: 3 | RNVC: 2
3272670298323: RNCC: 5 | RNVC: 2
91729356: RNCC: 5 | RNVC: 2

9 Jul 1992

5120-14-529-8524
Mechanical Puller

145298524
7107-1460-030: RNCC: 3 | RNVC: 2

17 Apr 2002

5120-14-441-2262
Mechanical Puller

144412262
6802V32-2508-00: RNCC: 3 | RNVC: 2

22 Aug 1990

5120-14-290-1977
Mechanical Puller

142901977
0863-78: RNCC: 3 | RNVC: 2
RA863-78: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-316-5646
Mechanical Puller

143165646
3210-97-32-890: RNCC: 3 | RNVC: 2
08-446: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-503-3261
Hand Hammer

145033261
E71-014-160: RNCC: 2 | RNVC: 2
0001220301: RNCC: 3 | RNVC: 2
1-22EH: RNCC: 5 | RNVC: 2
12203: RNCC: 5 | RNVC: 2

9 Jan 1998

5120-14-222-7367
Socket Wrench

142227367
61174075260B081: RNCC: 3 | RNVC: 2
4075-260B081: RNCC: 5 | RNVC: 2

1 Jan 1966

5120-14-347-9553
Mechanical Puller

143479553
MAS4694: RNCC: 3 | RNVC: 2

29 Mar 1978

5120-14-314-9103
Box Wrench

143149103
0M401: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-309-9590
Mechanical Puller

143099590
416C10: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-416-3462
Mechanical Puller

144163462
DLT611331: RNCC: 3 | RNVC: 2

3 Jun 1987

5120-14-402-0332
Seal Inserter

144020332
30002526P: RNCC: 3 | RNVC: 2

26 Jun 1985

5120-14-481-4863
Socket Wrench

144814863
45677978: RNCC: 3 | RNVC: 9

8 May 1996

5120-14-270-6456
Drive Pin Punch

142706456
6-001-148: RNCC: 3 | RNVC: 2
8810003073: RNCC: 3 | RNVC: 2
881-0-003-073: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-358-7187
Seal Inserter

143587187
8812443002: RNCC: 3 | RNVC: 2

7 Sep 1979

5120-14-452-1228
Mechanical Puller

144521228
8251: RNCC: 3 | RNVC: 2
91607394: RNCC: 5 | RNVC: 2
6096: RNCC: 5 | RNVC: 9
MUL8251: RNCC: 5 | RNVC: 9

18 Dec 1991

5120-14-397-7687
Mechanical Puller

143977687
EXTRACTEURLA35: RNCC: 3 | RNVC: 2

16 Jan 1985

5120-14-344-6059
Pipe Wrench

143446059
2614 10: RNCC: 3 | RNVC: 2
2614049: RNCC: 5 | RNVC: 9

9 Sep 1977

5120-14-238-5430
Mechanical Puller

142385430
TAX: RNCC: 3 | RNVC: 2
0362891171: RNCC: 5 | RNVC: 2
0362891171: RNCC: 5 | RNVC: 9
362891171: RNCC: 5 | RNVC: 9
ZINTAX: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-213-5223
Mechanical Puller

142135223
50733: RNCC: 3 | RNVC: 2
50733: RNCC: 3 | RNVC: 2

1 Jan 1964

5120-14-319-2535
Mechanical Puller

143192535
495: RNCC: 3 | RNVC: 2
3272670295254: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-481-5023
Torque Wrench

144815023
J.305DA: RNCC: 3 | RNVC: 2
J.305DA: RNCC: 5 | RNVC: 2
3148510290867: RNCC: 5 | RNVC: 2
0240314C00: RNCC: 5 | RNVC: 2
0029086: RNCC: 5 | RNVC: 9

11 May 1996

5120-14-510-0863
Torque Wrench

145100863
3DYNAST0P5-50: RNCC: 3 | RNVC: 2
3-71-606DIR2: RNCC: 6 | RNVC: 9
5120-14-2208476: RNCC: 6 | RNVC: 9
5120AA7001326: RNCC: 6 | RNVC: 9

4 Nov 1998

5120-14-425-5903
Torque Wrench

144255903
0582624: RNCC: 3 | RNVC: 2
SP1734: RNCC: 5 | RNVC: 2
SP.1734: RNCC: 5 | RNVC: 2

12 Jul 1988

5120-14-319-5025
Mechanical Puller

143195025
R34666: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-441-2270
Torque Wrench

144412270
6803E31-0025-00: RNCC: 3 | RNVC: 2

22 Aug 1990

5120-14-479-4153
Torque Wrench

144794153
46MS075: RNCC: 3 | RNVC: 2

10 Jan 1996

5120-14-415-5974
Torque Wrench

144155974
A153-3-9328: RNCC: 3 | RNVC: 2
0203158N00: RNCC: 5 | RNVC: 2

18 May 1987

5120-14-201-5127
Hand Rivet Set

142015127
0022504610: RNCC: 3 | RNVC: 2
M0B225-4: RNCC: 3 | RNVC: 2

1 Jan 1962

5120-14-531-9539
Drain Plug Wrench

145319539
138.330: RNCC: 3 | RNVC: 2
170-1: RNCC: 5 | RNVC: 2
138330: RNCC: 5 | RNVC: 2

2 Oct 2002

5120-14-311-1667
Drift Punch

143111667
247.8: RNCC: 3 | RNVC: 2
247-8: RNCC: 5 | RNVC: 2
3148511591208: RNCC: 5 | RNVC: 2
0714 63 22: RNCC: 5 | RNVC: 2
0159120: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-466-8481
Seal Inserter

144668481
MEH238-1: RNCC: 3 | RNVC: 2
89280448: RNCC: 5 | RNVC: 2

3 Dec 1993

5120-14-217-9980
Torque Wrench

142179980
0D2-21: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-493-6932
Torque Wrench

144936932
A.311A: RNCC: 3 | RNVC: 2
A311A: RNCC: 5 | RNVC: 2
3148515002519: RNCC: 5 | RNVC: 2
A311A: RNCC: 5 | RNVC: 2
1068959A00: RNCC: 5 | RNVC: 2
RAQ0226: RNCC: 5 | RNVC: 2
91786009: RNCC: 5 | RNVC: 2

13 Oct 1997

5120-14-480-6418
Torque Wrench

144806418
R.344D: RNCC: 3 | RNVC: 2
R344D: RNCC: 5 | RNVC: 2
3148515123443: RNCC: 5 | RNVC: 2
0512344: RNCC: 5 | RNVC: 9

21 Mar 1996

5120-14-444-8970
Torque Wrench

144448970
0882643X00: RNCC: 3 | RNVC: 2

28 Jan 1991

5120-14-444-8973
Torque Wrench

144448973
0882645A00: RNCC: 3 | RNVC: 2

28 Jan 1991

5120-14-529-0011
Torque Wrench

145290011
S.206-350: RNCC: 3 | RNVC: 2

27 Feb 2002

5120-14-548-8235
Torque Wrench

145488235
224-00-00: RNCC: 3 | RNVC: 2

15 Feb 2006

5120-14-316-6650
Torque Wrench

143166650
1703079: RNCC: 3 | RNVC: 2
1703079: RNCC: 5 | RNVC: 1
85-672-1163: RNCC: 6 | RNVC: 9

1 Jan 1975

5120-14-432-0749
Pin Remover

144320749
0063030: RNCC: 3 | RNVC: 2
T.174: RNCC: 5 | RNVC: 2

22 May 1989

5120-14-442-2004
Torque Wrench

144422004
NO PRIMARY REF14-442-2004: RNCC: 3 | RNVC: 2
0515125: RNCC: 5 | RNVC: 2
S.315: RNCC: 5 | RNVC: 2
S315: RNCC: 5 | RNVC: 2
91638862: RNCC: 5 | RNVC: 2

3 Oct 1990

5120-14-217-9984
Torque Wrench

142179984
0D2-32: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-540-0284
Torque Wrench

145400284
WE-B101: RNCC: 3 | RNVC: 2

25 Feb 2004

5120-14-462-3822
Torque Wrench

144623822
NO PRIMARY REF14-462-3822: RNCC: 3 | RNVC: 2
0001263: RNCC: 5 | RNVC: 2
0500240: RNCC: 5 | RNVC: 2
A.303: RNCC: 5 | RNVC: 2
91743197: RNCC: 5 | RNVC: 2

15 Apr 1993

5120-14-383-8151
Torque Wrench

143838151
8142798: RNCC: 3 | RNVC: 2

11 Apr 1983

5120-14-522-3428
Torque Wrench

145223428
M201B: RNCC: 3 | RNVC: 2

23 Oct 2000

5120-14-510-1621
Torque Wrench

145101621
FGCT0680MEE9971: RNCC: 3 | RNVC: 2
QJRM250: RNCC: 5 | RNVC: 9
5120-01-076-6487: RNCC: 6 | RNVC: 9
5120AA8012302: RNCC: 6 | RNVC: 9

4 Nov 1998

5120-14-451-5114
Mechanical Puller

144515114
540793: RNCC: 3 | RNVC: 2

21 Nov 1991

5120-14-530-6404
Seal Inserter

145306404
D47692R3: RNCC: 3 | RNVC: 2

1 Jul 2002

5120-14-295-1782
Drive Pin Punch

142951782
000638005P: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-362-4866
Mechanical Puller

143624866
095079: RNCC: 3 | RNVC: 2
095079W: RNCC: 5 | RNVC: 2

19 Mar 1980

5120-14-392-8518
Mechanical Puller

143928518
220520: RNCC: 3 | RNVC: 2

7 Apr 1984

5120-14-316-4999
Mechanical Puller

143164999
0U50128: RNCC: 3 | RNVC: 2
50128: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-469-9036
Box Wrench

144699036
55.12VSE: RNCC: 3 | RNVC: 2
3148511123423: RNCC: 5 | RNVC: 2
0112342: RNCC: 5 | RNVC: 9

18 May 1994

5120-14-530-6400
Seal Inserter

145306400
D47692R2: RNCC: 3 | RNVC: 2

1 Jul 2002

5120-14-358-4587
Box Wrench

143584587
2984-78: RNCC: 3 | RNVC: 9

13 Aug 1979

5120-14-533-0082
Oil Filter Wrench

145330082
U.46CL: RNCC: 3 | RNVC: 2

16 Jan 2003

5120-14-316-5005
Mechanical Puller

143165005
0U50134: RNCC: 3 | RNVC: 2
50134: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-461-6870
Socket Wrench

144616870
74.T5: RNCC: 3 | RNVC: 2
3148511195208: RNCC: 5 | RNVC: 2

22 Mar 1993

5120-14-341-5351
Socket Wrench

143415351
95B11258: RNCC: 3 | RNVC: 2

16 Mar 1977

5120-14-552-7399
Socket Wrench

145527399
94A.7: RNCC: 3 | RNVC: 2
94A.7: RNCC: 5 | RNVC: 2

26 Jan 2007

5120-14-256-2148
Box Wrench

142562148
100-34X35: RNCC: 3 | RNVC: 2

1 Jan 1969

5120-14-337-1981
Socket Wrench

143371981
CGB9247: RNCC: 3 | RNVC: 2

7 Oct 1976

5120-14-378-2901
Hand Hammer

143782901
154703: RNCC: 3 | RNVC: 2
79620: RNCC: 5 | RNVC: 9

20 Jul 1982

5120-14-546-3542
Mechanical Puller

145463542
26145900020: RNCC: 3 | RNVC: 2

28 Jun 2005

5120-14-340-7597
Hand Hammer Head

143407597
205-30: RNCC: 3 | RNVC: 2

14 Feb 1977

5120-14-365-7068
Mechanical Puller

143657068
131440U: RNCC: 3 | RNVC: 2
MAF0001004089: RNCC: 6 | RNVC: 9

8 Oct 1980

5120-14-330-1140
Mechanical Puller

143301140
173145A: RNCC: 3 | RNVC: 2
173145A: RNCC: 5 | RNVC: 9

2 Jul 1975

5120-14-264-9702
Marlinespike

142649702
14-16ACIER40: RNCC: 2 | RNVC: 2

1 Jan 1970

5120-14-303-3010
Hand Hammer

143033010
207-32AB: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-541-3273
Gas Torch

145413273
651: RNCC: 3 | RNVC: 2

27 May 2004

5120-14-543-1322
Socket Wrench Set

145431322
SE.3APB: RNCC: 3 | RNVC: 2

26 Aug 2004

5120-14-489-3888
Socket Wrench

144893888
8002714M00: RNCC: 3 | RNVC: 2

16 Jul 1997

5120-14-446-6388
Mechanical Puller

144466388
8814936401: RNCC: 3 | RNVC: 2

9 Apr 1991

5120-14-411-9186
Driftpin

144119186
27980090: RNCC: 3 | RNVC: 2

16 Sep 1986

5120-14-457-9460
Open End Box Wrench

144579460
853-100-283-0: RNCC: 3 | RNVC: 2

2 Oct 1992

5120-14-201-5652
Scratch Awl

142015652
NO PRIMARY REF14-201-5652: RNCC: 3 | RNVC: 2
109-4M: RNCC: 5 | RNVC: 9

1 Jan 1962

5120-14-397-2085
Mechanical Puller

143972085
853-200-487-0: RNCC: 3 | RNVC: 2

1 Dec 1984

5120-14-316-6621
Ratchet Wrench

143166621
AK5: RNCC: 3 | RNVC: 2
AK5: RNCC: 5 | RNVC: 1
85-101-2433: RNCC: 6 | RNVC: 9

1 Jan 1975

5120-14-338-3929
Socket Wrench

143383929
86-18: RNCC: 3 | RNVC: 2
92.18: RNCC: 3 | RNVC: 2
168-18: RNCC: 3 | RNVC: 9
0127980: RNCC: 5 | RNVC: 2
92-18: RNCC: 5 | RNVC: 2
3148511279809: RNCC: 5 | RNVC: 2
91537362: RNCC: 5 | RNVC: 2
3272670233140: RNCC: 5 | RNVC: 2
DEM168-18: RNCC: 5 | RNVC: 9

6 Nov 1976

5120-14-376-6290
Rack Bar Jack

143766290
3C377-00: RNCC: 3 | RNVC: 2

28 Apr 1982

5120-14-267-8261
Socket Wrench

142678261
MAT196-0066F4: RNCC: 3 | RNVC: 2
GSM196-011F7: RNCC: 5 | RNVC: 2
GSM196-11F7: RNCC: 5 | RNVC: 2
MAT196-1234F6: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-402-1511
Driftpin

144021511
437-02-212: RNCC: 3 | RNVC: 2

26 Jun 1985

5120-14-452-0174
Hand Beading Tool

144520174
851-601-310-6: RNCC: 3 | RNVC: 2

18 Dec 1991

5120-14-262-4898
Box Wrench

142624898
321-95-0030: RNCC: 3 | RNVC: 2
08-396: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-368-5061
Mechanical Puller

143685061
234800: RNCC: 3 | RNVC: 2
TF10A32419: RNCC: 5 | RNVC: 2
85-689-7923: RNCC: 6 | RNVC: 9

20 Feb 1981

5120-14-527-7155
Seal Inserter

145277155
888-490-500-1: RNCC: 3 | RNVC: 2

14 Nov 2001

5120-14-414-9547
Hammer Handle

144149547
NO PRIMARY REF14-414-9547: RNCC: 3 | RNVC: 2
210MC3: RNCC: 5 | RNVC: 9

26 Mar 1987

5120-14-455-5937
Stud Remover

144555937
287B.14: RNCC: 3 | RNVC: 2
0165730: RNCC: 5 | RNVC: 2
91727211: RNCC: 5 | RNVC: 2
287A.14: RNCC: 5 | RNVC: 2
287A14: RNCC: 5 | RNVC: 2

28 May 1992

5120-14-393-0709
Socket Wrench

143930709
MXZ125A11: RNCC: 3 | RNVC: 2

12 Apr 1984

5120-14-377-6208
Digging Bar

143776208
91367042: RNCC: 3 | RNVC: 2

10 Jun 1982

5120-14-224-8548
Socket Wrench

142248548
044BBC4BBF4AREP3: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-550-0590
Hand Hammer

145500590
0402040701: RNCC: 3 | RNVC: 2
00.72.24.46: RNCC: 5 | RNVC: 2

31 May 2006

5120-14-486-2844
Socket Wrench

144862844
F117048: RNCC: 3 | RNVC: 2

10 Mar 1997

5120-14-381-3509
Socket Wrench

143813509
1458: RNCC: 3 | RNVC: 2
1458: RNCC: 3 | RNVC: 2
6498800P: RNCC: 5 | RNVC: 2
91763870: RNCC: 5 | RNVC: 2
0003436000: RNCC: 5 | RNVC: 2
571022: RNCC: 5 | RNVC: 9
0003436000: RNCC: 5 | RNVC: 9
3436000: RNCC: 5 | RNVC: 9

25 Jan 1983

5120-14-457-3640
Seal Inserter

144573640
45215437: RNCC: 3 | RNVC: 2
45215437: RNCC: 5 | RNVC: 9

27 Aug 1992

5120-14-440-2914
Seal Inserter

144402914
5000261283: RNCC: 3 | RNVC: 2
89409861: RNCC: 5 | RNVC: 2

11 Jul 1990

5120-14-314-4901
Ratchet Wrench

143144901
M2D60996: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-357-9665
Mechanical Puller

143579665
8813125000: RNCC: 3 | RNVC: 2

20 Jul 1979

5120-14-323-3190
Socket Wrench

143233190
258R74: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-309-9603
Lamp Extractor

143099603
713710002: RNCC: 3 | RNVC: 2
ER50705: RNCC: 3 | RNVC: 9
CMA2-2: RNCC: 5 | RNVC: 2
62000455: RNCC: 5 | RNVC: 2
91297703: RNCC: 5 | RNVC: 2
0183634Y00: RNCC: 5 | RNVC: 2
713710002: RNCC: 5 | RNVC: 2
CMA2-2: RNCC: 5 | RNVC: 2

1 Jan 1974

5120-14-483-8598
Seal Remover

144838598
0-61854-2: RNCC: 3 | RNVC: 2

5 Oct 1996

5120-14-553-8562
Hand Hammer

145538562
M1351500: RNCC: 3 | RNVC: 2

24 May 2007

5120-14-250-8385
Open End Box Wrench

142508385
100F-12X13: RNCC: 3 | RNVC: 2
100F12X13: RNCC: 3 | RNVC: 2
3272670295360: RNCC: 5 | RNVC: 2
103-12X13: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-471-8064
Aligning Punch

144718064
853-203-189-0: RNCC: 3 | RNVC: 2

14 Sep 1994

5120-14-287-5253
Socket Wrench

142875253
NO PRIMARY REF14-287-5253: RNCC: 3 | RNVC: 2
0117180: RNCC: 5 | RNVC: 2
72-16: RNCC: 5 | RNVC: 2
91352516: RNCC: 5 | RNVC: 2
72.16: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-273-6994
Hand Hammer Head

142736994
E71-013B5000: RNCC: 2 | RNVC: 2
3-5000: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-249-9475
Open End Box Wrench

142499475
NO PRIMARY REF14-249-9475: RNCC: 3 | RNVC: 2
42-16X17: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-447-6360
Socket Wrench

144476360
616-28147-01: RNCC: 3 | RNVC: 2

29 May 1991

5120-14-208-6314
Socket Wrench

142086314
NO PRIMARY REF14-208-6314: RNCC: 3 | RNVC: 2
GTM30-193: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-549-9343
Box Wrench

145499343
55A.11/16X3/4: RNCC: 3 | RNVC: 2
55A.11/16X3/4: RNCC: 5 | RNVC: 2

18 May 2006

5120-14-204-9374
Hand Shovel

142049374
NO PRIMARY REF14-204-9374: RNCC: 3 | RNVC: 2
ST45SMGCHA2-304: RNCC: 5 | RNVC: 9

1 Jan 1963

5120-14-375-5645
Mechanical Puller

143755645
025214178A: RNCC: 3 | RNVC: 2
025-2141-78A: RNCC: 5 | RNVC: 2

26 Feb 1982

5120-14-390-4258
C Clamp

143904258
450-180: RNCC: 3 | RNVC: 2
3870-180: RNCC: 3 | RNVC: 9
3272670253209: RNCC: 5 | RNVC: 2

26 Jan 1984

5120-14-298-2247
Hot Line Stick

142982247
S968-01: RNCC: 3 | RNVC: 2
45191: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-253-9739
Socket Wrench

142539739
7M527: RNCC: 3 | RNVC: 2
PR46824: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-377-5260
Socket Wrench

143775260
99-10: RNCC: 3 | RNVC: 2
97-10: RNCC: 3 | RNVC: 2
3272670226814: RNCC: 5 | RNVC: 2

17 May 1982

5120-14-434-7767
Seal Inserter

144347767
EM403-712-278A: RNCC: 3 | RNVC: 2
EM403-712-278A: RNCC: 5 | RNVC: 9

4 Oct 1989

5120-14-400-1958
Mechanical Puller

144001958
332A93-3200-00: RNCC: 3 | RNVC: 2

24 Apr 1985

5120-14-542-0791
Box Wrench

145420791
M47545-1000: RNCC: 3 | RNVC: 2

2 Jul 2004

5120-14-434-7765
Seal Inserter

144347765
EM403-712-274B: RNCC: 3 | RNVC: 2
EM403-712-274B: RNCC: 5 | RNVC: 9

4 Oct 1989

5120-14-433-3232
Aligning Punch

144333232
853-202-859-0: RNCC: 3 | RNVC: 2

19 Jul 1989

5120-14-523-8308
Hand Screw Jack

145238308
756-2T: RNCC: 3 | RNVC: 2

6 Feb 2001

5120-14-441-2035
Pry Bar

144412035
332A63-1633-60: RNCC: 3 | RNVC: 2

22 Aug 1990

5120-14-291-0474
Mechanical Puller

142910474
OUT-DBE-6: RNCC: 3 | RNVC: 2
1877556015: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-342-9470
Trowel

143429470
E75501-220: RNCC: 2 | RNVC: 2
2001-220: RNCC: 3 | RNVC: 2
E75-501-220: RNCC: 5 | RNVC: 2
2695 975 022: RNCC: 5 | RNVC: 2

16 May 1977

5120-14-242-2815
Socket Wrench

142422815
35-21: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-441-2323
Socket Wrench

144412323
6807E31-0025-00: RNCC: 3 | RNVC: 2

22 Aug 1990

5120-14-040-1089
Socket Wrench

140401089
80-22: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-212-6711
Socket Wrench

142126711
91.32X34: RNCC: 3 | RNVC: 2
91-32X34: RNCC: 5 | RNVC: 2
3148511276402: RNCC: 5 | RNVC: 2
0127640: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-444-4559
Open End Box Wrench

144444559
231442: RNCC: 3 | RNVC: 2
85-694-3556: RNCC: 6 | RNVC: 9

9 Jan 1991

5120-14-449-4887
Drive Pin Punch

144494887
7-25N: RNCC: 3 | RNVC: 2
3272670273696: RNCC: 5 | RNVC: 2

21 Aug 1991

5120-14-496-4670
Socket Wrench

144964670
109-020-12: RNCC: 3 | RNVC: 2
10902012: RNCC: 5 | RNVC: 2
F300 0T 021 5608: RNCC: 6 | RNVC: 9

15 Oct 1997

5120-14-464-2444
Socket Wrench

144642444
854-500-345-0: RNCC: 3 | RNVC: 2

28 Jul 1993

5120-14-370-9650
Mechanical Puller

143709650
1039-097A500: RNCC: 3 | RNVC: 2

5 Jun 1981

5120-14-237-4700
Mechanical Puller

142374700
3130S95-60-002: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-441-2264
Mechanical Puller

144412264
6802V32-2666-00: RNCC: 3 | RNVC: 2

22 Aug 1990

5120-14-402-8566
Tool Handle Wedge

144028566
3-19X22: RNCC: 3 | RNVC: 2
6970-20: RNCC: 5 | RNVC: 2

19 Jul 1985

5120-14-206-8241
Lining Bar

142068241
F76-006-1800: RNCC: 2 | RNVC: 2

1 Jan 1964

5120-14-305-6019
Open End Box Wrench

143056019
42-8X10: RNCC: 3 | RNVC: 2
42.8X10: RNCC: 5 | RNVC: 2
K.55A: RNCC: 5 | RNVC: 2
3148511016206: RNCC: 5 | RNVC: 2
250-4475: RNCC: 5 | RNVC: 2
K.55A: RNCC: 5 | RNVC: 2
103-8X10: RNCC: 5 | RNVC: 9
FACOM42-8X10: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-398-6815
Mechanical Puller

143986815
16019120M: RNCC: 3 | RNVC: 2
JDE18: RNCC: 5 | RNVC: 2

31 Jan 1985

5120-14-302-4884
Driftpin

143024884
3160S94-82-115: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-341-3349
Mechanical Puller

143413349
330A93-2037-00: RNCC: 3 | RNVC: 2

16 Mar 1977

5120-14-325-7911
Lamp Extractor

143257911
505800012: RNCC: 3 | RNVC: 2
5-05800-012: RNCC: 5 | RNVC: 2
505800012: RNCC: 5 | RNVC: 2
5-05800-012: RNCC: 5 | RNVC: 2
523539-00: RNCC: 5 | RNVC: 2

2 Jul 1975

5120-14-527-6493
Spatula

145276493
888-485-700-1: RNCC: 3 | RNVC: 2

7 Nov 2001

5120-14-309-7426
Driftpin

143097426
341A93-1112-20: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-434-7766
Seal Inserter

144347766
EM403-712-277A: RNCC: 3 | RNVC: 2
EM403-712-277A: RNCC: 5 | RNVC: 9

4 Oct 1989

5120-14-352-2983
Open End Box Wrench

143522983
104-N-28X30: RNCC: 3 | RNVC: 2
104N28X30: RNCC: 3 | RNVC: 2
3272670274617: RNCC: 5 | RNVC: 2
104N28X30: RNCC: 5 | RNVC: 2
SYB0333: RNCC: 5 | RNVC: 2

16 Oct 1978

5120-14-527-7165
Mechanical Puller

145277165
888-492-500-1: RNCC: 3 | RNVC: 2

14 Nov 2001

5120-14-249-0672
Mechanical Puller

142490672
NO PRIMARY REF14-249-0672: RNCC: 3 | RNVC: 2
0067700: RNCC: 5 | RNVC: 2
U.31: RNCC: 5 | RNVC: 2
U31: RNCC: 5 | RNVC: 2
91604539: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-267-4805
Nail Set

142674805
12-5-6ACIERAUVANADIUM: RNCC: 2 | RNVC: 2
160-100X10X6: RNCC: 3 | RNVC: 2
774-6: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-500-3022
Mechanical Puller

145003022
U.306A-140: RNCC: 3 | RNVC: 2
3148510751733: RNCC: 5 | RNVC: 2
U-306A-140: RNCC: 5 | RNVC: 2
U306A-140: RNCC: 5 | RNVC: 2
TBD90005: RNCC: 5 | RNVC: 2
0695 586 552: RNCC: 5 | RNVC: 2
F300 0T 024 3107: RNCC: 6 | RNVC: 9

29 Oct 1997

5120-14-262-2118
Mechanical Puller

142622118
PA365-191A13-01: RNCC: 3 | RNVC: 2
S277458: RNCC: 5 | RNVC: 9

1 Jan 1970

5120-14-481-1758
Socket Wrench

144811758
GS141-10: RNCC: 3 | RNVC: 2

25 Apr 1996

5120-14-385-3348
Mechanical Puller

143853348
365A93-3205-01: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-290-1217
Box Wrench

142901217
57.19X22: RNCC: 3 | RNVC: 2
107-19X22: RNCC: 3 | RNVC: 2
3103122: RNCC: 3 | RNVC: 2
3148511134009: RNCC: 5 | RNVC: 2
57-19X22: RNCC: 5 | RNVC: 2
106-19X22: RNCC: 5 | RNVC: 2
0715 23 21: RNCC: 5 | RNVC: 2
0113400: RNCC: 5 | RNVC: 9
SYQ0747: RNCC: 5 | RNVC: 9
VIR3103122: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-391-4266
Socket Wrench

143914266
66-10X11: RNCC: 3 | RNVC: 2
0714 261 011: RNCC: 5 | RNVC: 2
3148511150207: RNCC: 5 | RNVC: 2

1 Mar 1984

5120-14-301-0954
Driftpin

143010954
330A93-3075-01: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-533-1408
Seal Inserter

145331408
888-452-002-0: RNCC: 3 | RNVC: 2

23 Jan 2003

5120-14-363-4646
Socket Wrench

143634646
72-37: RNCC: 3 | RNVC: 2

9 May 1980

5120-14-206-8139
Handsaw Filing Vise

142068139
NO PRIMARY REF14-206-8139: RNCC: 3 | RNVC: 2
231: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-380-6763
Hand Hammer

143806763
E71-013A3500EMC0R: RNCC: 2 | RNVC: 2
2-3500EC: RNCC: 3 | RNVC: 2
2-68EC: RNCC: 5 | RNVC: 2
E71-013A68EMC0R: RNCC: 5 | RNVC: 2

29 Nov 1982

5120-14-368-2867
Mechanical Puller

143682867
NO PRIMARY REF14-368-2867: RNCC: 3 | RNVC: 2
345-72236-0: RNCC: 5 | RNVC: 9

20 Feb 1981

5120-14-220-7476
Socket Wrench

142207476
BE42-17X17: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-503-0628
Mechanical Puller

145030628
853-290-174-0: RNCC: 3 | RNVC: 2

7 Jan 1998

5120-14-275-8905
Box Wrench

142758905
50.54: RNCC: 3 | RNVC: 2
108-54: RNCC: 3 | RNVC: 2
119-54: RNCC: 3 | RNVC: 9
3148511068007: RNCC: 5 | RNVC: 2
50-54: RNCC: 5 | RNVC: 2
3272670258358: RNCC: 5 | RNVC: 2
0106800: RNCC: 5 | RNVC: 9
108: RNCC: 5 | RNVC: 9
DEM119-54: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-526-7436
Socket Wrench

145267436
9149-0323: RNCC: 3 | RNVC: 2
SAF9149-0323: RNCC: 5 | RNVC: 9

30 Aug 2001

5120-14-437-5755
Socket Wrench

144375755
76.18: RNCC: 3 | RNVC: 2
182/339/3: RNCC: 5 | RNVC: 2
3148511209004: RNCC: 5 | RNVC: 2
76-18: RNCC: 5 | RNVC: 2
SYB0322: RNCC: 5 | RNVC: 2
91369649: RNCC: 5 | RNVC: 2
250-5333: RNCC: 5 | RNVC: 2
2695 612 618: RNCC: 5 | RNVC: 2
0120900: RNCC: 5 | RNVC: 9
FACOM76.18: RNCC: 5 | RNVC: 9

7 Feb 1990

5120-14-418-2040
Hand Hammer

144182040
863-80: RNCC: 3 | RNVC: 2

6 Aug 1987

5120-14-431-2681
Mechanical Puller

144312681
3160S95-68-010: RNCC: 3 | RNVC: 2

12 Apr 1989

5120-14-388-0796
Socket Wrench

143880796
91.26X27: RNCC: 3 | RNVC: 2
73024: RNCC: 5 | RNVC: 2
3057340001: RNCC: 5 | RNVC: 2
3148511276105: RNCC: 5 | RNVC: 2
91-26X27: RNCC: 5 | RNVC: 2
0127610: RNCC: 5 | RNVC: 9

12 Oct 1983

5120-14-300-9655
Mechanical Puller

143009655
341A93-3512-00: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-228-1360
Drill Drift

142281360
3255-3: RNCC: 3 | RNVC: 2
970 34: RNCC: 3 | RNVC: 2
SYQ0923: RNCC: 5 | RNVC: 2
162-04-3: RNCC: 5 | RNVC: 9

1 Jan 1966

5120-14-439-4517
Hand Beading Tool

144394517
853-203-013-0: RNCC: 3 | RNVC: 2

2 May 1990

5120-14-433-3227
Aligning Punch

144333227
853-202-854-0: RNCC: 3 | RNVC: 2

19 Jul 1989

5120-14-386-6164
Box Wrench

143866164
9970-145-852: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-307-8800
Driftpin

143078800
330A93-1002-00: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-434-7827
Aligning Punch

144347827
853-490-161-0: RNCC: 3 | RNVC: 2

4 Oct 1989

5120-14-465-4643
Seal Inserter

144654643
851-500-067-0: RNCC: 3 | RNVC: 2

30 Sep 1993

5120-14-224-8712
Ratchet Wrench

142248712
10-1-23: RNCC: 3 | RNVC: 2
1035-23: RNCC: 5 | RNVC: 9

1 Jan 1966

5120-14-390-8670
Mechanical Puller

143908670
RU253-5M21A2-01A: RNCC: 3 | RNVC: 2
253-5M21A2-01A: RNCC: 5 | RNVC: 2

1 Mar 1984

5120-14-549-9384
Ratchet Wrench

145499384
64.1/2X9/16: RNCC: 3 | RNVC: 2
3148517428058: RNCC: 5 | RNVC: 2

18 May 2006

5120-14-235-6979
Box Wrench

142356979
100 1-2X9-16: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-513-6837
Socket Wrench

145136837
MAT196-1234F22: RNCC: 3 | RNVC: 2

6 Apr 1999

5120-14-432-8448
Socket Wrench

144328448
NO PRIMARY REF14-432-8448: RNCC: 3 | RNVC: 2
509910: RNCC: 5 | RNVC: 9
509910: RNCC: 5 | RNVC: 9

28 Jun 1989

5120-14-532-3868
Seal Inserter

145323868
MGF604-22: RNCC: 3 | RNVC: 2

30 Oct 2002

5120-14-351-9447
Socket Wrench

143519447
99004-21001: RNCC: 3 | RNVC: 2
99004-21001: RNCC: 5 | RNVC: 2

16 Oct 1978

5120-14-449-7092
Mechanical Puller

144497092
24C8363-10A: RNCC: 3 | RNVC: 2

4 Sep 1991

5120-14-525-9450
Mechanical Puller

145259450
888-411-800-1: RNCC: 3 | RNVC: 2

20 Jun 2001

5120-14-361-4895
Seal Inserter

143614895
8810131015: RNCC: 3 | RNVC: 2
85-691-1404: RNCC: 6 | RNVC: 9

24 Jan 1980

5120-14-335-3183
Socket Wrench

143353183
NO PRIMARY REF14-335-3183: RNCC: 3 | RNVC: 2
977-78: RNCC: 5 | RNVC: 9

30 Jun 1976

5120-14-481-4827
Mechanical Puller

144814827
NO PRIMARY REF14-481-4827: RNCC: 3 | RNVC: 2
806503: RNCC: 5 | RNVC: 9

8 May 1996

5120-14-374-0092
Mechanical Puller

143740092
1-9266-070: RNCC: 3 | RNVC: 2
6833: RNCC: 5 | RNVC: 2

8 Dec 1981

5120-14-274-8486
Hand Vise

142748486
281.180: RNCC: 3 | RNVC: 2
3457180: RNCC: 3 | RNVC: 2
3148511643808: RNCC: 5 | RNVC: 2
281-180: RNCC: 5 | RNVC: 2
0164380: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-269-2217
Ratchet Wrench

142692217
NO PRIMARY REF14-269-2217: RNCC: 3 | RNVC: 2
1035-80: RNCC: 5 | RNVC: 9

1 Jan 1970

5120-14-350-0278
Mechanical Puller

143500278
3130S98-03-500-1: RNCC: 3 | RNVC: 2

14 Jun 1978

5120-14-530-4837
Mechanical Puller

145304837
8812034000: RNCC: 3 | RNVC: 2

17 Jun 2002

5120-14-401-4085
Mechanical Puller

144014085
350A93-3303-01: RNCC: 3 | RNVC: 2

5 Jun 1985

5120-14-369-0913
Mechanical Puller

143690913
90890-06F17: RNCC: 3 | RNVC: 2

17 Apr 1981

5120-14-368-4025
Driftpin

143684025
STM03224: RNCC: 3 | RNVC: 2
STM03224: RNCC: 5 | RNVC: 2
STM032-24: RNCC: 5 | RNVC: 2

20 Feb 1981

5120-14-321-8184
Ratchet Wrench

143218184
7180-0005: RNCC: 3 | RNVC: 2
7180-0005: RNCC: 5 | RNVC: 2
7180-0005: RNCC: 5 | RNVC: 9
MFH164: RNCC: 5 | RNVC: 9
7180-0005: RNCC: 5 | RNVC: 9
85-676-6133: RNCC: 6 | RNVC: 9

1 Jan 1975

5120-14-269-4731
Socket Wrench

142694731
A181-10-09: RNCC: 3 | RNVC: 2
A181-10-09: RNCC: 3 | RNVC: 9
A181-10-09: RNCC: 5 | RNVC: 2
A181-10-09: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-222-7480
Box Wrench

142227480
30-25-32X13-16: RNCC: 3 | RNVC: 2
101 25-32X13-16: RNCC: 5 | RNVC: 2

1 Jan 1966

5120-14-317-0715
Box Wrench

143170715
0-79716-2: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-288-5690
Drive Pin Punch

142885690
51-0-5: RNCC: 3 | RNVC: 2
SYB0316: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-242-0703
Mechanical Puller

142420703
U.52: RNCC: 3 | RNVC: 2
101815: RNCC: 5 | RNVC: 2
3148510703206: RNCC: 5 | RNVC: 2
U52: RNCC: 5 | RNVC: 2
0070320: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-307-8806
Mechanical Puller

143078806
330A98-2085-00: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-406-5835
Mechanical Puller

144065835
853-201-372-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-268-8607
Tool Handle Wedge

142688607
E71-015-20: RNCC: 2 | RNVC: 2

1 Jan 1970

5120-14-465-4715
Mechanical Puller

144654715
851-500-163-0: RNCC: 3 | RNVC: 2

30 Sep 1993

5120-14-236-5530
Socket Wrench

142365530
94.10: RNCC: 3 | RNVC: 2
3148511288009: RNCC: 5 | RNVC: 2
94-10: RNCC: 5 | RNVC: 2
91550335: RNCC: 5 | RNVC: 2
0128800: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-503-8335
Seal Inserter

145038335
1101861R00: RNCC: 3 | RNVC: 2

30 Jan 1998

5120-14-524-4194
Piston Inserter

145244194
Q47799: RNCC: 3 | RNVC: 2

16 Mar 2001

5120-14-319-6874
Open End Box Wrench

143196874
G1-15-466: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-287-5257
Socket Wrench

142875257
0117380: RNCC: 3 | RNVC: 2
72-36: RNCC: 5 | RNVC: 2
72.36: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-320-7219
Mechanical Puller

143207219
C47699: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-201-7305
Scratch Awl

142017305
NO PRIMARY REF14-201-7305: RNCC: 3 | RNVC: 2
1837-5: RNCC: 5 | RNVC: 9
6230: RNCC: 5 | RNVC: 9
M032A08: RNCC: 5 | RNVC: 9

1 Jan 1962

Load More Results