5120-33-154-9097
Machinist's Vise
5120331549097 331549097 0111.008
A clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S. View more Machinist's Vise
Managed by Spain
NSN Created on 14 Feb 1994
Data Last Changed
July 2023
July 2023
NATO Update Count
1
1
NATO Data Quality
Marketplace 5120-33-154-9097
Need Help?
Request a Quotation from participating marketplace vendors
Request a Quotation from participating marketplace vendors
Related Documents 5120-33-154-9097 4+ Documents (More...)
7820-15-067-4470 7820150674470 150674470 DICE
: 1 2 Jul 2010 5120-14-393-0346 Machinist's Vise 61012RNCC: 3 | RNVC: 2 | DAC: 4 12 Apr 1984 5120-33-154-9097
5306-99-192-6064 5306991926064 991926064 is an externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. see also screw, cap, hexagon head and screw, machine.
5306-99-547-7413 5306995477413 995477413 is an externally threaded fastener whose threaded portion is of one nominal diameter, no. 10 (0.190 in.) (5 mm) or larger. it has a round unthreaded neck or shank all or part of which is of greater diameter than the threaded portion. the head is not designed to be held or driven with an inserted drivers. a locking feature may be incorporated in the design of the head or threads. for items with a thread diameter smaller than no. 10 (0.190 in.) (5 mm) and those items with an inserted drive head, use screw, shoulder. for items which are no. 10 (0.190 in.) (5 mm) or larger in size and are both shouldered and have an externally relieved body, use bolt, externally relieved body. excludes thumbscrew.
Restrictions 5120-33-154-9097
End Users 5120-33-154-9097
- Spain (YB)
Approved Sources 5120-33-154-9097
- Part Number
- Manufacturer
- Status
- 0111.008
- Manufacturer
- 0267B - Acesa Sa (Replaced)
- Primary Buy
- Primary Buy
NATO Stock Numbers Related to 5120-33-154-9097
5120-13-109-2318 5120-66-150-3027 5120-99-279-8914 5120-66-012-5780 5120-12-195-7184 5120-21-105-3270 5120-12-355-6658 5120-12-370-9436 5120-21-105-3269 5120-99-467-1166 5120-66-159-4124 5120-99-120-1700 5120-99-910-6593 5120-01-499-1467 5120-01-652-0440 5120-01-457-8150 5120-12-373-7292 5120-22-600-8162