5120-22-610-0366

4 11 Apr 2005 5110-22-221-4046 Hand Rasp 6-343-08-2-0RNCC: 3 | RNVC: 2 | DAC: 4 14 Dec 1972 5120-22-610-0366

5310-19-000-8827 5310190008827 190008827 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

8415-50-000-8827 8415500008827 500008827 is a knit pullover, outer garment worn by participants in athletic activities. the garment normally has quarter-length sleeves and is long enough to be tucked inside the waistband of trousers or pants. it may have a monogram, number, and/or lettering which is indicative of athletic activitiy. do not use if a more specific item name applies. excludes undershirt (as modified) and jersey (as modified.)

5895-15-000-8827 5895150008827 150008827 WINN MESH

2640-40-000-8827 2640400008827 400008827 is a one-piece or split circular item made of molded rubber and/or fabric, designed for use between the inner tube and rim bead of a pneumatic tire to prevent chaffing or pinching of the inner tube when the tire is assembled on a wheel. excludes rubber strip; rubber sheet (as modified); and seal, rubber (as modified).