What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.

What is a Grommet Inserting Punch And Die?

A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Blacksmith's Punch?

A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Tap Extractor?

A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Mechanical Finger?

A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

A Crowbar is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hand Caulking Tool?

A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Screwdriver And Wrench Assembly?

A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Drill Drift?

A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

What is a Fuse Puller?

A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.

What is a Hand Lead Seal Press?

A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.

What is a Hand Beading Tool?

A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.

Hand Tools, Nonedged, Nonpowered - Germany (DE)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by Germany (DE) - NCB is 12

Page 7 of 62

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by Germany

51	20	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - Germany (DE)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 15 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Hand Vise? 31 Items: A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.
What is a Grommet Inserting Punch And Die? 25 Items: A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.
What is a Hand Hydraulic Jack? 111 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 93 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 587 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 13 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
What is a Hand Tube Flaring Tool? 32 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Blacksmith's Punch? 17 Items: A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.
What is a Drain Plug Wrench? 21 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 76 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 14 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 1670 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
What is a Pipe Wrench? 54 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 165 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 55 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
What is a Tap Extractor? 13 Items: A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.
Screwdriver,Offset 77 Items
What is a Screwdriver Bit? 446 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Mechanical Finger? 17 Items: A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.
What is a Socket Wrench Socket? 1303 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 876 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 1273 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 17 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 282 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
What is a Hand Tube Bender? 49 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 669 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 39 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pinch Bar? 17 Items: A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.
What is a Wrecking Bar? 10 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Crowbar? 12 Items: A Crowbar is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 356 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 484 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 37 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 110 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
What is a Hand Caulking Tool? 13 Items: A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.
Face,Hammer,Inserted 54 Items
What is a Hole Sheet Metal Holder? 40 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Screwdriver And Wrench Assembly? 10 Items: A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.
What is a Hand Rivet Set? 62 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Drill Drift? 11 Items: A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.
What is a Socket Wrench Handle Bar? 160 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Stake,Sheet Metalworking 33 Items
Riveter,Blind,Hand 31 Items
What is a Hand Shovel? 24 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 37 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 20 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
Block,Dolly,Sheet Metalworking 33 Items
What is a Piston Ring Compressor? 61 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Fuse Puller? 22 Items: A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.
What is a Hand Lead Seal Press? 12 Items: A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.
What is a Hand Beading Tool? 54 Items: A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.
What is a Hand Hammer? 406 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
Head,Hand Hammer 11 Items
What is a Lamp Extractor? 95 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Carpenters' Pincers? 16 Items: A Carpenters' Pincers (PINCERS,CARPENTERS') is a plierlike hand tool having two opposing jaws which may have hammerlike backs. One handle has a nail or tack pulling claw, the other is shaped to form a screwdriver. The tool may contain a wire cutter. See also NIPPERS, END CUTTING and PINCERS, FARRIERS'.
What is a Farrier's Pincers? 20 Items: A Farrier's Pincers (PINCERS,FARRIER'S) is a plierlike hand tool having two opposing jaws which are designed for removing horseshoes. The handles may have plain or ball ends. See also NIPPERS, END CUTTING and PINCERS, CARPENTERS'.
What is a Hand Pipe And Sewer Auger? 15 Items: A Hand Pipe And Sewer Auger (AUGER,PIPE AND SEWER,HAND) is a flexible spring wire or tape, with a cleaning or boring head at one or both ends. A handle may be provided for turning and pushing. It may also include a metal housing and/or reel in which the tape is coiled. Excludes AUGER, WATER CLOSET, HAND.
What is a Hand Roller? 23 Items: A Hand Roller (ROLLER,HAND) is a hand-held item consisting of a roller on an axle attached to a handle. The width of the roller face (surface) is more than 1/4 inch. See also STITCHER, CEMENTING AND VULCANIZING. Excludes INKING ROLLER, HAND and paint rollers.
What is a Trowel? 36 Items: A Trowel is a tool used for bricklaying, concrete work, plastering, linoleum laying, and masonry work. Excludes CORNER TOOL, CONCRETE.
What is a Hand Abrasive Wheel Dresser? 11 Items: A Hand Abrasive Wheel Dresser (DRESSER,ABRASIVE WHEEL,HAND) is a tool designed to remove glaze from, dress, shape, sharpen, and true solid abrasive wheels. Excludes NIB, DIAMOND, WHEEL DRESSING.
What is a Lamp Cap Extractor? 26 Items: A Lamp Cap Extractor (EXTRACTOR,LAMP CAP) is a tool specifically designed to facilitate the removal of lamp caps from switchboards, panels or indicator lamps.
Replacing Tool,Engine Valve Seat Insert 10 Items
What is a Rivet Bucking Bar? 20 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 154 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 175 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Woven Cable Grip? 30 Items: A Woven Cable Grip (GRIP,CABLE,WOVEN) is a braided wire device designed to clutch a bare or insulated conductor, cable or wire rope, for holding taut or drawing through conduit.
What is a Screw Thread Insert Extractor? 16 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is a Hand Helical Spring Puller Hook? 12 Items: A Hand Helical Spring Puller Hook (HOOK,HELICAL SPRING PULLER,HAND) is a hook whose curved end conforms to Style AP10 of Reference Drawing Group AP.
What is an Electron Tube Extractor? 12 Items: An Electron Tube Extractor (EXTRACTOR,ELECTRON TUBE) is a hand tool designed to facilitate the removal of electron tubes from electronic equipment and to avoid burning the fingers. It may be used for installing tubes.
What is a Cross Tip Screwdriver? 224 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 208 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 61 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 163 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Tool Handle Wedge? 42 Items: A Tool Handle Wedge (WEDGE,TOOL HANDLE) is excludes WEDGE, WOOD.
What is a Valve Tappet Adjusting Tool? 14 Items: A Valve Tappet Adjusting Tool (ADJUSTING TOOL,VALVE TAPPET) is a hand device for adjusting overhead valve tappets of internal combustion engines. It consists of a handle, and at one end a wrench opening or a drive for a replaceable wrench socket, and a knob operated screwdriver tip. The wrench opening (or socket) engages the tappet adjusting screw lock nut and the screwdriver engages the screw.
What is a Hand Powered Poppet Valve Lapper? 16 Items: A Hand Powered Poppet Valve Lapper (LAPPER,POPPET VALVE,HAND POWERED) is a hand tool designed to rotate and/or oscillate poppet type valves in their seats for reseating purposes.
What is a Marlinespike? 11 Items: A Marlinespike is a metal hand tool made in the shape of a tapered pin. One end is pointed and the opposite end may be headed. The body may contain an eye for a lanyard sling, or be grooved lengthwise. Excludes CABLE PICK and FID.
What is an Aligning Punch? 104 Items: An Aligning Punch (PUNCH,ALIGNING) is a round, square, hexagonal or octagonal bodied hand tool, having a round tapered section 6-1/2 inches (165.1 mm) or more in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, DRIFT and DRIFTPIN.
What is a Drift Punch? 39 Items: A Drift Punch (PUNCH,DRIFT) is a round, square, hexagonal, or octagonal bodied hand tool, having a round tapered section 4 to 6 inches (101.6 mm to 152.4 mm) inclusive in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, ALIGNING; and DRIFTPIN.
What is a Socket Wrench Adapter-Extension? 11 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 21 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 149 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Wrench Extension Handle? 36 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Crowfoot Wrench Head Socket? 13 Items: A Crowfoot Wrench Head Socket (SOCKET,CROWFOOT WRENCH HEAD) is a component with an open-wall opening having one end designed to fit into a HEAD, CROWFOOT SOCKET WRENCH and the other end having an internal opening such as hexagonal or 8-point. See also CROWFOOT ATTACHMENT, SOCKET WRENCH.
What is a Socket Wrench Crowfoot Attachment? 267 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 18 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 40 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 35 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 998 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 350 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 102 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 468 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 42 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand-Operated Grommet And Eyelet Press? 14 Items: A Hand-Operated Grommet And Eyelet Press (PRESS,GROMMET AND EYELET,HAND-OPERATED) is a device which punches or pierces holes and in addition fastens or sets eyelets and grommets in cloth, paper and similar material. May be used for fastening or setting rivets, lacing hooks and snaps in cloth, paper and similar material. It is hand operated by lever or screw action. See also PUNCH, EYELET, PLIER TYPE and PRESS, GROMMET AND EYELET, FOOT OPERATED.
What is a Claw Bar? 27 Items: A Claw Bar (BAR,CLAW) is before using, refer to Reference Drawing Group AG.
What is a Pin Vise? 12 Items: A Pin Vise (VISE,PIN) is a clamping device used to hold small items which are usually round. The device consists of a hollow handle having a chuck at one or both ends. The longitudinal axis of the hollow handle is in alignment with that of the chuck(s).
What is a Dapping Punch? 16 Items: A Dapping Punch (PUNCH,DAPPING) is an item consisting of steel bar having one end ball shaped. It is used to form flat metal sheets into a hemispherical shape by working it against a die and striking the opposite end of punch with a hammer.
What is a Tire Iron? 29 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 123 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Machinist's Vise? 64 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Clamp Base Bench Vise? 10 Items: A Clamp Base Bench Vise (VISE,BENCH,CLAMP BASE) is a clamping device consisting of a base, one stationary and one manual screw actuated jaw, and one or more guide bars or rods. Designed with an integral clamp for attaching to a bench, table, or the like. Does not include pipe holding jaws.
What is a Fixed Open End Wrench Set? 61 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Socket Wrench Set? 241 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is a Combination Box And Open End Wrench Set? 48 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Box Wrench Set? 32 Items: A Box Wrench Set (WRENCH SET,BOX) is a group of box wrenches having different characteristics. It may include a HANDLE, EXTENSION WRENCH. See also WRENCH SET, COMBINATION, BOX AND OPEN END.
Spoon,Body And Fender 15 Items
What is a Wrench Kit? 26 Items: A Wrench Kit is an assortment of various types and sizes of wrenches such as SOCKET, SOCKET WRENCH; WRENCH, OPEN END, FIXED; WRENCH, BOX and the like. It may include adapter(s), ratchet(s) and the like. See also WRENCH SET (as modified.
What is a Screw Extractor Set? 14 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 24 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
Jack,Scissors,Hand 17 Items
Pick,Digging 13 Items
What is a Hand Intrenching Tool? 13 Items: A Hand Intrenching Tool (INTRENCHING TOOL,HAND) is a shovel type tool or a pick and shovel combination having standard cutting blade edges or specially designed blade edges for cutting and chopping. It may have a handgrip on the handle. It is designed to be used by individual soldiers primarily for intrenching. Refer to Reference Drawing Group BG for styles.
What is a Piston Ring Expander? 28 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
What is a Joint Breaking Wedge? 12 Items: A Joint Breaking Wedge (WEDGE,JOINT BREAKING) is refer to Reference Drawing Group A before using item name.
Blade,Saddler's Harness Awl 15 Items
Mallet,Rubber 11 Items
What is a Rack Bar Jack? 24 Items: A Rack Bar Jack (JACK,RACK BAR) is excludes JACK, BUMPER and JACK, REEL, HAND.
What is a Hand Tube Flaring Punch? 15 Items: A Hand Tube Flaring Punch (PUNCH,TUBE FLARING,HAND) is a noncutting tool having a shaped end or section designed to flare the ends of tubes. One type is designed to flare the ends of tubes against a tube sheet, and another to flare tube ends to mate with tube fittings. Includes punch components of FLARING TOOL, TUBE, HAND.
What is a Hose Strap Band Clamping Tool? 14 Items: A Hose Strap Band Clamping Tool (CLAMPING TOOL,STRAP BAND,HOSE) is an item designed to tension and lock metal straps around a rubber hose, and the like. It is also used to clamp and hold fittings therein.
What is a Socket Wrench Handle Ratchet Head? 15 Items: A Socket Wrench Handle Ratchet Head (RATCHET HEAD,SOCKET WRENCH HANDLE) is a reversible ratcheting mechanism having a square external end designed to fit into the internal end of a wrench socket or attachment, and has provisions for a round bar grip, but does not include the bar. When furnished with a bar, see HANDLE, SOCKET WRENCH. Excludes RATCHET ATTACHMENT, SOCKET WRENCH.
What is an Etching Needle? 10 Items: An Etching Needle (NEEDLE,ETCHING) is a styluslike tool mounted in a handle. It is used in preparing metal lithographic plates and photo engravings. See also ETCHING POINT.
What is a Mechanical Puller? 1147 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 505 Items
What is a Slip Joint Pliers? 95 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Jewelers' Pliers? 11 Items: A Jewelers' Pliers (PLIERS,JEWELERS') is a tool having jaws designed for use in the assembly and repair of jewelry, watches, and the like. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 112 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 14 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 16 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 35 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 19 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 32 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 73 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Refrigeration Valve Stem Wrench Socket? 10 Items: A Refrigeration Valve Stem Wrench Socket (SOCKET,WRENCH,REFRIGERATION VALVE STEM) is an item having a 1/4 inch (6.3 mm) square external drive on one end, and a square internal opening at the other end. The outside diameter is specially sized to clear openings in refrigeration valve bonnets and covers for reaching recessed stems. It is designed for use with a ratchet wrench for opening and/or closing square stem refrigeration valves.
What is a Drive Pin Punch Set? 27 Items: A Drive Pin Punch Set (PUNCH SET,DRIVE PIN) is a group of PUNCH, DRIVE PIN having different characteristics.
What is a Mechanical Puller Step Plate? 72 Items: A Mechanical Puller Step Plate (STEP PLATE,MECHANICAL PULLER) is a circular disk, flanged to provide a shoulder, and designed to provide a base for the screw point of a PULLER, MECHANICAL when pulling externally mounted bearings, gears, and the like from hollow shafts or housings. It has a concentric, countersunk hole to accommodate the puller screw point.
What is a Solid Center Punch? 26 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Cable Type Ratchet Lever Puller? 34 Items: A Cable Type Ratchet Lever Puller (PULLER,RATCHET LEVER,CABLE TYPE) is an item consisting of a metal frame and ratchet lever reel to which is attached one end of a flexible cable (wire rope). The cable feeds through the fast eye in the metal frame, and may be reeved through a slip hook tackle hook. See also BINDER, LOAD; HOIST, WIRE ROPE and STRETCHER, WIRE.
What is a Hand Yoke Riveter? 13 Items: A Hand Yoke Riveter (RIVETER,YOKE,HAND) is a hand tool designed to install metallic grommets and/or tubular rivets by forcing the unflanged end of the grommet/rivet outward to form another flange which prevents the grommet/rivet from coming out of the item it has been installed in. The tool uses a pliers type pinching action to form the flange. See also PUNCH, EYELET, PLIER TYPE.
What is a Hand Material Handling Hook? 17 Items: A Hand Material Handling Hook (HOOK,MATERIAL HANDLING,HAND) is a hook whose curved end conforms to Style AP1, AP2, AP3 or AP4 of Reference Drawing Group AP. Excludes HOOK, MANHOLE COVER, HAND; HOOK, WIRE BREAKING, HAND; HOOK, ROCK CRUSHER FEEDING, HAND; HOOK, STRAINER REMOVING, HAND and HOOKS, BAG HANDLING, HAND.
What is a Magnetic Retrieving Tool? 22 Items: A Magnetic Retrieving Tool (RETRIEVING TOOL,MAGNETIC) is a hand-operated magnetic device used to locate and pick up metallic articles, such as bolts, nuts, pins, washers, and the like, in confined spaces. It may be rigid, flexible or adjustable. Excludes FINGER, MECHANICAL.
What is a Mechanical Puller Adapter? 68 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Socket Head Screw Socket Wrench Attachment Wrench Set? 10 Items: A Socket Head Screw Socket Wrench Attachment Wrench Set (WRENCH SET,SOCKET HEAD SCREW SOCKET WRENCH ATTACHMENT) is an assortment of various size SOCKET WRENCH ATTACHMENT, SOCKET HEAD SCREW, and HANDLE, SOCKET WRENCH. It may include universal joints, ratcheting adapters and other attachments used therewith.
What is a Mechanical Puller Forcing Screw? 66 Items: A Mechanical Puller Forcing Screw (FORCING SCREW,MECHANICAL PULLER) is a cylindrical, threaded item which may be headed or headless. It may include a threadless portion. All or part of the unthreaded portion(s) must be of a single diameter equal to or smaller than the maximum major diameter of the threaded portion(s). Headless items must have an external or internal wrenching feature or have a provision to facilitate turning. The item must be designed to exert pressure by screwing motion when used with a mechanical puller.
What is a Screw Thread Insert Inserter? 66 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Flat Tip Screwdriver Set? 18 Items: A Flat Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP) is a group of SCREWDRIVER, FLAT TIP having different characteristics.
What is a Terminal Crimping Tool Contact Positioner? 16 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 25 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is a Screw Thread Insert Tang Breakoff Tool? 37 Items: A Screw Thread Insert Tang Breakoff Tool (TANG BREAKOFF TOOL,SCREW THREAD INSERT) is a punch designed to fit within a coiled wire thread insert to manually or mechanically break off the tang by which the insert was threaded into the hole.
What is a Multiposition Vise? 11 Items: A Multiposition Vise (VISE,MULTIPOSITION) is a clamping device consisting of a workholding head and a base provided with swiveling, tilting, and locking arrangement. Designed to be bolt mounted to a bench, table, or the like and constructed so that the workholding head can be swiveled 360 degrees (6.3 radians) in a horizontal plane and tilted from a normal level position downward at least 90 degrees (1.6 radians), and locked in any desired position within the swiveling and tilting ranges. Intended for use in manufacturing and maintenance of mechanical and electronic parts and assemblies or any light bench work. See also VISE, PATTERNMAKER'S.
What is an Adjustable Wrench? 84 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 177 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 40 Items
Handle,Shovel 22 Items
What is a Torque Wrench Set? 13 Items: A Torque Wrench Set (WRENCH SET,TORQUE) is an assortment or two or more torque wrenches or various sizes. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH; and BIT, SCREWDRIVER.
What is a Retaining Ring Installation Tool? 12 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Bearing And Bushing Inserter? 626 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 59 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 466 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 23 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 18 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 80 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 23 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 12 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 12 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Seal Inserter And Remover? 42 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 158 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is an Electrical Contact Inserter And Remover? 21 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Pin Inserter? 28 Items: A Pin Inserter (INSERTER,PIN) is a hand tool designed to facilitate the insertion of a pin into a hole.
What is a Piston Inserter? 39 Items: A Piston Inserter (INSERTER,PISTON) is a tool designed to permit installation of a piston or piston assembly without damaging the packings or piston.
What is a Spring Inserter And Remover? 23 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 11 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Stud Inserter? 20 Items: A Stud Inserter (INSERTER,STUD) is a device designed to drive in studs. It does not have any facilities for removing or extracting studs. See also INSERTER AND REMOVER, STUD.
What is a Stud Inserter And Remover? 13 Items: A Stud Inserter And Remover (INSERTER AND REMOVER,STUD) is a group of items designed to extract and to drive studs. It may include collets, guides, housings, holders and the like. See also REMOVER SET, STUD and INSERTER, STUD.
What is a Gear Inserter? 10 Items: A Gear Inserter (INSERTER,GEAR) is a hand tool designed to install various gears onto a gearshaft. It may be operated by a pushing or a striking force.
What is a Crimping Tool Die? 145 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is an Electrical Connector Inserter? 10 Items: An Electrical Connector Inserter (INSERTER,ELECTRICAL CONNECTOR) is a hand tool designed to hold an electrical connector, and to assist in the positioning and installation of the connector on a cover, panel or the like.
What is a Float? 11 Items: A Float is a tool used for concrete, plastering and grouting work.
What is a Mechanical Puller Set? 19 Items: A Mechanical Puller Set (PULLER SET,MECHANICAL) is two or more separate PULLER, MECHANICAL of different fixed sizes.
What is a Lifting Pneumatic Bag? 28 Items: A Lifting Pneumatic Bag (PNEUMATIC BAG,LIFTING) is a device made of flexible material designed to lift another item by being placed under the item and being inflated with air or some other gas. It will have a means of being connected to an air or gas source and may include a connector hose, a control valve and/or a pressure regulator.
What is a Lifting Pneumatic Bag Kit? 12 Items: A Lifting Pneumatic Bag Kit (PNEUMATIC BAG KIT,LIFTING) is a collection of items consisting of two or more PNEUMATIC BAG, LIFTING, connecting cords, lanyards, feeding hoses and the like required for lifting an item when normal jacking conditions are not applicable. May include items for packaging the individual parts.
What is a Bearing Staking Installation Tool? 14 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
What is a Sealant Dispenser? 15 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Retaining Ring Pliers Set? 10 Items: A Retaining Ring Pliers Set (PLIERS SET,RETAINING RING) is a group of PLIERS, RETAINING RING having different characteristics.
What is a Pedal Adjustment Tool Compressor? 38 Items: A Pedal Adjustment Tool Compressor (COMPRESSOR,TOOL,PEDAL ADJUSTMENT) is a hand tool having hinged leverage handles designed to compress both ends of a spring to facilitate installation.
What is a Plug Electrical Connector Extractor? 20 Items: A Plug Electrical Connector Extractor (EXTRACTOR,ELECTRICAL CONNECTOR,PLUG) is a hand tool designed to disassemble CONNECTOR, PLUG, ELECTRICAL from a CONNECTOR, RECEPTACLE, ELECTRICAL.
What is a Screwdriver Handle? 12 Items: A Screwdriver Handle (HANDLE,SCREWDRIVER) is an item used to accommodate various types of BIT, SCREWDRIVER. It is designed to rotate a bit that is used for installing or removing screws.
What is a Wire Twister Pliers? 11 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 313 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is a Flat Tip And Cross Tip Screwdriver Set? 22 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is an Oil Filter Wrench? 14 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 442 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Rotating Members Aligning Tool? 29 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
Arm,Handling Tool 16 Items
What is a Splicing Sleeve Compressing Tool? 11 Items: A Splicing Sleeve Compressing Tool (COMPRESSING TOOL,SPLICING SLEEVE) is a hand tool having hinged leverage handles similar to a CUTTER, BOLT or pliers, designed to compress a splicing sleeve when joining the ends of two conductors, or when forming an eye splice in the end of a wire rope. Excludes CRIMPING TOOL, TERMINAL, HAND.
Handle,Hydraulic Jack 30 Items
What is a Manual Impact Wrench? 17 Items: A Manual Impact Wrench (WRENCH,IMPACT,MANUAL) is a manually operated handheld tool consisting of spring-loaded handle and a power-impact head which delivers a torsional impact from either continuous movement of the handle in one direction, or by a reciprocating action. It is used in tightening and loosening fasteners, such as bolts, nuts, and the like. The item may include sockets, extensions and offset fittings, nut runners, and the like.
What is a Torque Screwdriver? 15 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.

Stock Items From Supply Class 5120 Page 7 of 62

5120-12-345-3589
Bearing And Bushing Inserter And Remover

123453589
F6 278200: RNCC: 3 | RNVC: 2

5 Mar 1998

5120-12-387-7226
Bearing And Bushing Inserter

123877226
F30378153: RNCC: 3 | RNVC: 2

26 Jan 2012

5120-12-090-1884

5120-12-368-7088
Spatula

123687088
77070000-TCS: RNCC: 3 | RNVC: 2

7 Apr 2006

5120-12-310-4357
Driftpin

123104357
32049003: RNCC: 3 | RNVC: 2
12744: RNCC: 5 | RNVC: 2

21 May 1987

5120-12-368-8970
Tap Extractor

123688970
33-5B: RNCC: 3 | RNVC: 2
01.98.83.95: RNCC: 5 | RNVC: 2

4 May 2006

5120-12-336-0942
Schluesseleinsatz

123360942
0005480-002: RNCC: 3 | RNVC: 2
0005480-002: RNCC: 5 | RNVC: 9

24 Oct 1994

5120-12-393-1320
Ten Mounting Tools

123931320
10106246: RNCC: 3 | RNVC: 2

13 Aug 2013

5120-12-199-8216
Bearing And Bushing Inserter

121998216
206589034300: RNCC: 3 | RNVC: 2

2 Jun 1984

5120-12-325-8807
Seal Inserter

123258807
315589051500: RNCC: 3 | RNVC: 2

17 Jul 1991

5120-12-358-7763
Fuehrungs- Platte

123587763
80996030177: RNCC: 3 | RNVC: 2

13 Nov 2002

5120-12-182-2100
Dorn

121822100
7570130400: RNCC: 3 | RNVC: 2

21 Jan 1980

5120-12-325-5347
Mechanical Puller

123255347
8364591: RNCC: 3 | RNVC: 2

14 Jun 1991

5120-12-365-5391
Socket Wrench Handle

123655391
11071000-TCS: RNCC: 3 | RNVC: 2

13 Jan 2005

5120-12-358-8975
Electrical Contact Remover

123588975
80996060295: RNCC: 3 | RNVC: 2

26 Nov 2002

5120-12-150-3937
Mechanical Puller

121503937
1X46095110: RNCC: 3 | RNVC: 2
V95110: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-339-7759
Socket Wrench Screwdriver Attachment

123397759
1010-19: RNCC: 3 | RNVC: 2
2489110003: RNCC: 5 | RNVC: 2

16 Jan 1996

5120-12-021-2696

5120-12-044-5036

5120-12-387-6983
Mechanical Puller Attachment

123876983
T80091107: RNCC: 3 | RNVC: 2

25 Jan 2012

5120-12-304-1011
Torque Wrench

123041011
105-31803W2: RNCC: 3 | RNVC: 2

11 Jun 1985

5120-12-311-2449
Pin Inserter And Remover

123112449
4985065: RNCC: 3 | RNVC: 2

7 Aug 1987

5120-12-377-1183
Quick Adjusting Screw Clamp

123771183
STB125M: RNCC: 3 | RNVC: 2

11 Dec 2008

5120-12-303-2306
Retaining Ring Pliers

123032306
71996A2S: RNCC: 3 | RNVC: 9

7 Mar 1985

5120-12-360-0133
Electrical Contact Remover

123600133
VG95236T04CB002: RNCC: 2 | RNVC: 2

27 Mar 2003

5120-12-126-5493
Abziehv Druckstueck

121265493
3045892133: RNCC: 3 | RNVC: 2
3045892133: RNCC: 3 | RNVC: 9
304589213300: RNCC: 5 | RNVC: 2
304589213300: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-126-3161

5120-12-156-7243
Socket Wrench

121567243
149120410: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-354-0321
Montierhuelse

123540321
541589001400: RNCC: 3 | RNVC: 2

29 May 2001

5120-12-170-8652
Spanner Wrench

121708652
250531: RNCC: 3 | RNVC: 2

17 Aug 1977

5120-12-091-7725

5120-12-369-5752
Mechanical Puller

123695752
31-1: RNCC: 3 | RNVC: 2
905.0.14.502.0: RNCC: 5 | RNVC: 2

26 Jul 2006

5120-12-173-9139
Hand Sheet Metal Groover

121739139
631B101-6: RNCC: 3 | RNVC: 9
2279B6: RNCC: 5 | RNVC: 9

22 May 1978

5120-12-391-0548
Seal Inserter

123910548
F6559645: RNCC: 3 | RNVC: 2

18 Jan 2013

5120-12-304-6137
Hand Hammer

123046137
50484-0-0: RNCC: 3 | RNVC: 2
50493-9-0: RNCC: 5 | RNVC: 2

5 Aug 1985

5120-12-193-7623
Mechanical Puller

121937623
601589043300: RNCC: 3 | RNVC: 2
601 589 04 33 00: RNCC: 5 | RNVC: 2

30 Aug 1982

5120-12-137-4183

5120-12-131-4402

5120-12-364-0849
Mechanical Puller Attachment

123640849
F30375330: RNCC: 3 | RNVC: 2
M55.093.009: RNCC: 5 | RNVC: 2
(241)A4249M55.093.009: RNCC: 8 | RNVC: 2

19 Aug 2004

5120-12-190-4593
Screw Thread Insert Inserter

121904593
0150 0168600: RNCC: 3 | RNVC: 2

26 Nov 1981

5120-12-382-5783
Socket Wrench Adapter

123825783
31150001-TCS: RNCC: 3 | RNVC: 2

12 Jul 2010

5120-12-381-9998
Offset Screwdriver

123819998
0831400S: RNCC: 3 | RNVC: 2

27 Apr 2010

5120-12-150-3916
Getrie Druckstueck

121503916
1X46090791: RNCC: 3 | RNVC: 2
V90791-2: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-337-1571
Cross Tip Screwdriver

123371571
T49087 2: RNCC: 3 | RNVC: 2
8078LPZD-2: RNCC: 3 | RNVC: 2
180487: RNCC: 5 | RNVC: 2
1804879: RNCC: 5 | RNVC: 2

26 Jan 1995

5120-12-325-7507
Schluesseleinsatz

123257507
5188029: RNCC: 3 | RNVC: 2

4 Jul 1991

5120-12-123-5942
Socket Wrench Crowfoot Attachment

121235942
1950Z5-8: RNCC: 3 | RNVC: 2
105606: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-340-7664
Torque Wrench Adapter

123407664
R809655: RNCC: 3 | RNVC: 2
MOE-8: RNCC: 5 | RNVC: 2

6 Jun 1996

5120-12-332-8455
Fixed Open End Wrench Set

123328455
6-750: RNCC: 3 | RNVC: 2

27 Sep 1993

5120-12-318-7595
Mechanical Puller Attachment

123187595
8.454.820.000: RNCC: 3 | RNVC: 2
0501227050: RNCC: 5 | RNVC: 2
05.012.27.05.0: RNCC: 5 | RNVC: 9

15 Aug 1989

5120-12-367-6020
Hand Tube Flaring Tool

123676020
5390014: RNCC: 3 | RNVC: 2

8 Sep 2005

5120-12-183-0821
Socket Wrench Crowfoot Attachment

121830821
0706D100870-3: RNCC: 3 | RNVC: 2

18 Mar 1980

5120-12-336-5073
Ku Montierwerkzeug

123365073
0851 3695: RNCC: 3 | RNVC: 2
8513695: RNCC: 5 | RNVC: 2

21 Nov 1994

5120-12-010-9682

5120-12-384-8985
Quick Adjusting Screw Clamp

123848985
46.000.133: RNCC: 3 | RNVC: 2

7 Apr 2011

5120-12-334-4065
Machinist's Vise

123344065
10804 UND 10214 UND 10884: RNCC: 3 | RNVC: 2
B14410: RNCC: 5 | RNVC: 9
10804 UND 10214 UND 10884: RNCC: 5 | RNVC: 9

4 May 1994

5120-12-091-4768

5120-12-091-3177

5120-12-325-3336
Ratchet Wrench

123253336
NO PRIMARY REF 12-325-3336: RNCC: 3 | RNVC: 2
1322Z3/4: RNCC: 5 | RNVC: 9
174319: RNCC: 5 | RNVC: 9

27 May 1991

5120-12-382-6890
Hand Terminal Crimping Tool

123826890
HU32144: RNCC: 3 | RNVC: 2

26 Jul 2010

5120-12-131-5808
Piston Ring Compressor

121315808
125-0: RNCC: 3 | RNVC: 2
794-01: RNCC: 3 | RNVC: 2
11068-0: RNCC: 3 | RNVC: 2
5747630001: RNCC: 5 | RNVC: 2
52620: RNCC: 5 | RNVC: 2
125: RNCC: 5 | RNVC: 9
106376: RNCC: 5 | RNVC: 9
2476L: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-368-9451
Socket Wrench Socket

123689451
870-A19/32: RNCC: 3 | RNVC: 2
00.45.81.22: RNCC: 5 | RNVC: 2

8 May 2006

5120-12-157-0270
Socket Head Screw Key

121570270
263-5/64: RNCC: 3 | RNVC: 2
106003: RNCC: 5 | RNVC: 9
1997ZB5-64: RNCC: 5 | RNVC: 9
954-5-64: RNCC: 5 | RNVC: 9
44901: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-336-5853
Montierhuelse

123365853
0851 6671: RNCC: 3 | RNVC: 2
8516671: RNCC: 5 | RNVC: 2

28 Nov 1994

5120-12-196-7849
Ratchet Wrench

121967849
RBM1415S: RNCC: 3 | RNVC: 2
RBM1415S: RNCC: 3 | RNVC: 2

16 Aug 1983

5120-12-372-0683
Screwdriver Bit Set And Handle

123720683
26043: RNCC: 3 | RNVC: 2

15 Jun 2007

5120-12-181-6889
Socket Wrench

121816889
2514-1: RNCC: 3 | RNVC: 2
VW114: RNCC: 3 | RNVC: 9

10 Dec 1979

5120-12-163-9172
Screwdriver Bit

121639172
2326-PH2: RNCC: 3 | RNVC: 2
3676150001: RNCC: 5 | RNVC: 2
2326-2: RNCC: 5 | RNVC: 9
59750: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-140-7290
Socket Head Screw Key

121407290
1264-1323: RNCC: 3 | RNVC: 2
1264-1323: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-311-8061
Mater Saug- Griff

123118061
272.315 955: RNCC: 2 | RNVC: 2
272.315 955: RNCC: 3 | RNVC: 2

19 Oct 1987

5120-12-372-2758
Mechanical Puller Forcing Screw

123722758
621220: RNCC: 3 | RNVC: 2

3 Jul 2007

5120-12-146-5127
Dorn

121465127
1X56093476: RNCC: 3 | RNVC: 2
V93476: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-145-9607
Abdrueck- Huelse

121459607
1875890135: RNCC: 3 | RNVC: 2
187589013500: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-331-5908
Pry Bar

123315908
18.741: RNCC: 3 | RNVC: 9

25 May 1993

5120-12-343-5235
Montierdorn

123435235
V1409-T603: RNCC: 3 | RNVC: 2
V1409-T603: RNCC: 5 | RNVC: 2

1 Jul 1997

5120-12-373-6704
Box Wrench

123736704
SK961-180000.025.0: RNCC: 3 | RNVC: 2

27 Nov 2007

5120-12-139-3111

5120-12-173-9146
Plastic Mallet

121739146
370035: RNCC: 3 | RNVC: 2
3625Y60: RNCC: 3 | RNVC: 9
107413: RNCC: 5 | RNVC: 2

22 May 1978

5120-12-308-7855
Spanner Wrench

123087855
272.322 010: RNCC: 2 | RNVC: 2
272.322 010: RNCC: 3 | RNVC: 2

17 Nov 1986

5120-12-308-3367
Hand Beading Tool

123083367
484 162: RNCC: 3 | RNVC: 2

29 Sep 1986

5120-12-186-7349
Montagewerkzeug

121867349
99370418: RNCC: 3 | RNVC: 2
1X56136471: RNCC: 5 | RNVC: 9
1X56136471: RNCC: 5 | RNVC: 9

2 Feb 1981

5120-12-389-4551
Screwdriver Handle

123894551
05051462001: RNCC: 3 | RNVC: 2
816R: RNCC: 5 | RNVC: 2
676410: RNCC: 5 | RNVC: 2

9 Jul 2012

5120-12-390-3245
Mechanical Puller Forcing Screw

123903245
F6452180: RNCC: 3 | RNVC: 2

30 Oct 2012

5120-12-196-7388
Mechanical Puller

121967388
1X56136258: RNCC: 3 | RNVC: 2
0535799: RNCC: 5 | RNVC: 2
535799: RNCC: 5 | RNVC: 9

9 Aug 1983

5120-12-364-3147
Socket Wrench Socket

123643147
01240014-TCS: RNCC: 3 | RNVC: 2

9 Sep 2004

5120-12-021-5714

5120-12-316-6559
Socket Head Screw Key

123166559
4900064-25: RNCC: 3 | RNVC: 2

31 Jan 1989

5120-12-156-3207
Dorn

121563207
1215 8499: RNCC: 3 | RNVC: 2
12158499: RNCC: 5 | RNVC: 9
6-206-0-690-004-4: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-194-0835
Torque Wrench Adapter

121940835
TL5120-0086-660: RNCC: 2 | RNVC: 2
7852-8 15: RNCC: 5 | RNVC: 9
21/DCA-15: RNCC: 5 | RNVC: 9
6264110013: RNCC: 5 | RNVC: 9
6630D-15: RNCC: 5 | RNVC: 9
732/40 15: RNCC: 5 | RNVC: 9

29 Sep 1982

5120-12-123-5930
Socket Wrench Crowfoot Attachment

121235930
1950Z1-5-16: RNCC: 3 | RNVC: 2
440A-1 5/16: RNCC: 3 | RNVC: 2
105617: RNCC: 5 | RNVC: 2
03490058: RNCC: 5 | RNVC: 2
82500402: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-147-5647
Box Wrench

121475647
1000099-360200.01.0: RNCC: 2 | RNVC: 2
25704-360275T8: RNCC: 3 | RNVC: 2
CM1693: RNCC: 3 | RNVC: 2
1000099-360200.01.0: RNCC: 5 | RNVC: 2
1000099-360200-01-0: RNCC: 5 | RNVC: 2
1000099-360200.01.0: RNCC: 5 | RNVC: 2
25704-360275T8: RNCC: 5 | RNVC: 2
1000099-360200-01-0: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-305-2529
Rohrbieger Dorn

123052529
5-5/16-020-000-21417: RNCC: 3 | RNVC: 2

15 Oct 1985

5120-12-383-6969
Mechanical Puller

123836969
1X56.095.086: RNCC: 3 | RNVC: 2

25 Nov 2010

5120-12-356-0320
Einstel Schluessel

123560320
10428: RNCC: 3 | RNVC: 2

15 Jan 2002

5120-12-126-5457
Face Spanner Wrench Socket

121265457
3045890207: RNCC: 3 | RNVC: 2
304589020700: RNCC: 5 | RNVC: 2
304589020700: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-326-1864
Socket Head Screw Key

123261864
NO PRIMARY REF 12-326-1864: RNCC: 3 | RNVC: 2
173282: RNCC: 5 | RNVC: 9
1996-069: RNCC: 5 | RNVC: 9

15 Aug 1991

5120-12-134-5102
Open End Wrench

121345102
499204-3154: RNCC: 2 | RNVC: 2
499204-3154: RNCC: 3 | RNVC: 2
499204-3154: RNCC: 5 | RNVC: 2
257: RNCC: 5 | RNVC: 9
499204-3154: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-002-1971

5120-12-332-6912
Montierhuelse

123326912
9108510037: RNCC: 3 | RNVC: 2

7 Sep 1993

5120-12-364-6781
Magnetic Retrieving Tool

123646781
77260025-TCS: RNCC: 3 | RNVC: 2

20 Oct 2004

5120-12-384-1696
Blind Riveter Nosepiece

123841696
7251583: RNCC: 3 | RNVC: 2

28 Jan 2011

5120-12-181-9722
Abzieher Haken

121819722
VW202S: RNCC: 3 | RNVC: 9

28 Dec 1979

5120-12-329-4364
Mechanical Puller Attachment

123294364
GEWINDEEINSATZ GR I M14X1,5: RNCC: 3 | RNVC: 2
80996020106: RNCC: 5 | RNVC: 2
80.99602-0106: RNCC: 5 | RNVC: 2

19 Aug 1992

5120-12-321-7470
Flat Tip Screwdriver

123217470
8060VDE-0,5X2,8X150: RNCC: 3 | RNVC: 2
169072: RNCC: 5 | RNVC: 2
8060VDE/3: RNCC: 5 | RNVC: 2

21 Jun 1990

5120-12-368-2120
Socket Head Screw Key

123682120
DIN65253-18: RNCC: 2 | RNVC: 2
42 X 18: RNCC: 3 | RNVC: 2
4010886635070: RNCC: 5 | RNVC: 2
6350730: RNCC: 5 | RNVC: 2

9 Jan 2006

5120-12-361-1197
Box Wrench

123611197
CBD32558G01: RNCC: 3 | RNVC: 2

26 Aug 2003

5120-12-345-3425
Montierdorn

123453425
437 589 08 43 00: RNCC: 3 | RNVC: 2

3 Mar 1998

5120-12-123-4962
Hand Hammer

121234962
031A233: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-126-5474
Montagevorrichtung

121265474
3375890331: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-388-6321
Flat Tip And Cross Tip Screwdriver Set

123886321
159.0100: RNCC: 3 | RNVC: 2

5 Apr 2012

5120-12-147-3197
Dorn

121473197
1X46106163: RNCC: 3 | RNVC: 2
V106163: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-357-7365
Pliers

123577365
F30275990: RNCC: 3 | RNVC: 2

17 Jul 2002

5120-12-130-6246
Combination Box And Open End Wrench

121306246
LG142635: RNCC: 3 | RNVC: 2
WZ41: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-126-5959

5120-12-120-9627
Drive Pin Punch

121209627
574D201-7-5: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-343-6190
Swivel Knob Jeweler's Screwdriver

123436190
2125-0,50X3,0: RNCC: 3 | RNVC: 9

8 Jul 1997

5120-12-305-2533
Rohrbieger Dorn

123052533
5-5/16-049-000-21421: RNCC: 3 | RNVC: 2

15 Oct 1985

5120-12-369-2739
Montierhuelse

123692739
80996060287: RNCC: 3 | RNVC: 2
80.99606-0287: RNCC: 5 | RNVC: 2

13 Jun 2006

5120-12-368-7281
Socket Wrench Set

123687281
1400- IAU: RNCC: 3 | RNVC: 2
00.45.55.93: RNCC: 5 | RNVC: 2

11 Apr 2006

5120-12-352-3335
Drive Pin Punch

123523335
22015.0.00.100.00P0S.3: RNCC: 3 | RNVC: 2

8 Nov 2000

5120-12-379-8458
Hand Pipe And Sewer Auger

123798458
7.2492: RNCC: 3 | RNVC: 2

8 Sep 2009

5120-12-323-0619
Pole Raising Support

123230619
01328 G-F: RNCC: 3 | RNVC: 2

22 Oct 1990

5120-12-301-5974
Socket Head Screw Key

123015974
906-2,5: RNCC: 3 | RNVC: 2
42184: RNCC: 5 | RNVC: 2
62615-2,5: RNCC: 5 | RNVC: 9
1997MBL-2-5: RNCC: 5 | RNVC: 9

25 Oct 1984

5120-12-127-4673

5120-12-199-4230

5120-12-387-3128
Socket Head Screw Key

123873128
00542: RNCC: 3 | RNVC: 2
264P ZOLL-7/64: RNCC: 5 | RNVC: 2

28 Nov 2011

5120-12-172-1843
Spanner Wrench

121721843
903-812-0082: RNCC: 3 | RNVC: 2

3 Jan 1978

5120-12-193-8559
Box Wrench

121938559
640-27: RNCC: 3 | RNVC: 2
2A-27: RNCC: 3 | RNVC: 2
5-27: RNCC: 3 | RNVC: 2
618500-27: RNCC: 5 | RNVC: 2
6185SW27: RNCC: 5 | RNVC: 2
1307110002: RNCC: 5 | RNVC: 9

7 Sep 1982

5120-12-343-3855
Montage- Hebel

123433855
658589016300: RNCC: 3 | RNVC: 2

12 Jun 1997

5120-12-363-9274
Bearing And Bushing Inserter

123639274
T670P5001271: RNCC: 3 | RNVC: 2

5 Aug 2004

5120-12-193-5705
Mechanical Puller Forcing Screw

121935705
4S55117-0000: RNCC: 3 | RNVC: 2
4S55117-0000-407: RNCC: 5 | RNVC: 2
MAGERD 1536: RNCC: 5 | RNVC: 2
4S55117-0000-405: RNCC: 5 | RNVC: 2
4S55117-0000-403: RNCC: 5 | RNVC: 2

4 Aug 1982

5120-12-341-9447
Mechanical Puller Attachment

123419447
923-0010: RNCC: 3 | RNVC: 2

19 Nov 1996

5120-12-342-8692
Crimping Tool Die

123428692
R10: RNCC: 3 | RNVC: 2

10 Apr 1997

5120-12-002-0942

5120-12-167-9551
Spanner Wrench

121679551
12709-22000W7: RNCC: 3 | RNVC: 2
12709-22000W7: RNCC: 5 | RNVC: 2
12709-22000W7: RNCC: 5 | RNVC: 9

7 Feb 1977

5120-12-167-9764
Open End Wrench

121679764
NO PRIMARY REF 12-167-9764: RNCC: 3 | RNVC: 2
229423: RNCC: 5 | RNVC: 9
8M10: RNCC: 5 | RNVC: 9

7 Feb 1977

5120-12-163-8893
Spanner Wrench

121638893
VG95211-ML-121638893: RNCC: 2 | RNVC: 2
1X56 131 405: RNCC: 3 | RNVC: 2
1X56131405: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-174-1992
Socket Head Screw Key

121741992
003-0501-01-03: RNCC: 3 | RNVC: 2
105947: RNCC: 5 | RNVC: 9
1997MB2: RNCC: 5 | RNVC: 9

12 Jun 1978

5120-12-199-5560
Screw Thread Insert Inserter

121995560
SRM 0508W: RNCC: 3 | RNVC: 2
SRM 0508W: RNCC: 5 | RNVC: 9

11 May 1984

5120-12-332-0179
Hand Hammer

123320179
102028: RNCC: 3 | RNVC: 9
C341-800: RNCC: 3 | RNVC: 9

15 Jul 1993

5120-12-166-0403
Refrigeration Valve Stem Wrench Socket

121660403
R6810M3-4: RNCC: 3 | RNVC: 2
108888: RNCC: 5 | RNVC: 2

24 Jul 1976

5120-12-186-7289
Mechanical Puller Forcing Screw

121867289
99366638: RNCC: 3 | RNVC: 2
430040-2: RNCC: 5 | RNVC: 9
430040-2: RNCC: 5 | RNVC: 9

2 Feb 1981

5120-12-126-1847
Tool Handle Wedge

121261847
KRALLE4: RNCC: 3 | RNVC: 2
6798-5: RNCC: 5 | RNVC: 9
KRALLE4: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-368-6428
Screw Extractor

123686428
350-52: RNCC: 3 | RNVC: 2
01.42.48.86: RNCC: 5 | RNVC: 2

3 Apr 2006

5120-12-306-9322
Spanner Wrench

123069322
01TC33031: RNCC: 3 | RNVC: 2

17 Apr 1986

5120-12-368-5246
Inspection Mirror

123685246
11301: RNCC: 2 | RNVC: 2

21 Mar 2006

5120-12-195-2088
Tap And Reamer Wrench

121952088
NM495-03: RNCC: 3 | RNVC: 2
NM495-03: RNCC: 5 | RNVC: 9

26 Jan 1983

5120-12-320-5623
Socket Wrench Ratchet Attachment

123205623
754-14: RNCC: 3 | RNVC: 2

26 Jan 1990

5120-12-178-8394
Torch And Regulator Wrench

121788394
A10456: RNCC: 3 | RNVC: 9

18 May 1979

5120-12-185-3137

5120-12-092-2259

5120-12-189-4140
Dorn

121894140
3050: RNCC: 3 | RNVC: 9

24 Sep 1981

5120-12-147-3815
Spanner Wrench

121473815
760308010001: RNCC: 3 | RNVC: 2
760308010001: RNCC: 5 | RNVC: 9
760308010001: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-330-3091
Screwdriver Bit

123303091
2657-5,5MM: RNCC: 3 | RNVC: 2

1 Dec 1992

5120-12-365-5154
Craftsman's Tweezers

123655154
T2364: RNCC: 3 | RNVC: 2

11 Jan 2005

5120-12-321-6369
Face Spanner Wrench Socket

123216369
3165: RNCC: 3 | RNVC: 2

11 Jun 1990

5120-12-145-1016
S Spannvorrichtung

121451016
838589023100: RNCC: 3 | RNVC: 2
8385890231: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-363-9040
Bearing And Bushing Inserter And Remover

123639040
T670P5001252: RNCC: 3 | RNVC: 2

4 Aug 2004

5120-12-303-4728
Rohrbieger Rolle

123034728
BAV 6/12 BIEGEROLLE ROHRD 10MM: RNCC: 3 | RNVC: 2

26 Mar 1985

5120-12-335-5187
Socket Head Screw Key

123355187
620.376-4: RNCC: 3 | RNVC: 2

25 Aug 1994

5120-12-374-0297
Pedal Adjustment Tool Compressor

123740297
65-1: RNCC: 3 | RNVC: 2

11 Jan 2008

5120-12-305-2034
Retaining Ring Pliers

123052034
798-5: RNCC: 3 | RNVC: 2
52775: RNCC: 5 | RNVC: 2
205614: RNCC: 5 | RNVC: 2
5753770004: RNCC: 5 | RNVC: 2

7 Oct 1985

5120-12-362-4808
Cross Tip Screwdriver

123624808
54.0084.960.34: RNCC: 3 | RNVC: 2
8078VDE-0: RNCC: 5 | RNVC: 2

2 Mar 2004

5120-12-323-4754
Mast Einsetzer

123234754
23778 G-F: RNCC: 3 | RNVC: 2

29 Nov 1990

5120-12-174-7318
Hammer Handle

121747318
TL5120-0126-A11: RNCC: 2 | RNVC: 2
3244034: RNCC: 3 | RNVC: 2
3244.034: RNCC: 5 | RNVC: 2
224430: RNCC: 5 | RNVC: 9

25 Jul 1978

5120-12-196-2110
Cable Type Ratchet Lever Puller

121962110
X014: RNCC: 2 | RNVC: 9
5120-21200: RNCC: 6 | RNVC: 9

13 Jun 1983

5120-12-349-9158
Cross Tip Screwdriver

123499158
103-1X80: RNCC: 3 | RNVC: 2
4732-1: RNCC: 3 | RNVC: 2
01411001080: RNCC: 3 | RNVC: 2
66903-1-80: RNCC: 5 | RNVC: 2
47321001: RNCC: 5 | RNVC: 2

26 Jan 2000

5120-12-167-9690
Spanner Wrench

121679690
1255-31000W6: RNCC: 3 | RNVC: 2
1255-31000W6: RNCC: 5 | RNVC: 2
1255-31000W6: RNCC: 5 | RNVC: 9

7 Feb 1977

5120-12-010-1386

5120-12-163-6075
Haken

121636075
VG95211-ML-121636075: RNCC: 2 | RNVC: 2
105-14101W11: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-194-6622
Spanner Wrench

121946622
1013/41W7: RNCC: 3 | RNVC: 2
1013-41W7: RNCC: 3 | RNVC: 2
312387: RNCC: 5 | RNVC: 2

25 Nov 1982

5120-12-363-8358
Bearing And Bushing Inserter

123638358
T671P5001107: RNCC: 3 | RNVC: 2

29 Jul 2004

5120-12-355-9447
Mechanical Puller

123559447
204-3: RNCC: 3 | RNVC: 2

8 Jan 2002

5120-12-130-7398
Screwdriver Bit

121307398
820H5-5-4: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-140-3888

5120-12-010-9668

5120-12-319-6858
W Spannvorrichtung

123196858
4900059-751800.000.0/3/4: RNCC: 3 | RNVC: 2

25 Oct 1989

5120-12-335-2897
Screwdriver Bit

123352897
0851 6812: RNCC: 3 | RNVC: 2
8516812: RNCC: 5 | RNVC: 2

4 Aug 1994

5120-12-140-9698
Ko Fuehrungsbolzen

121409698
0276023001: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-316-1450
Ku Montierwerkzeug

123161450
1X56136914: RNCC: 3 | RNVC: 2

24 Dec 1988

5120-12-176-3525
Hand Hammer

121763525
TL5120-0126-B3: RNCC: 2 | RNVC: 2
3377060: RNCC: 3 | RNVC: 2
3377064: RNCC: 5 | RNVC: 9
237760KG60: RNCC: 5 | RNVC: 9

23 Nov 1978

5120-12-331-0553
Mechanical Puller

123310553
NO PRIMARY REF 12-331-0553: RNCC: 3 | RNVC: 2
80.99601.0040: RNCC: 5 | RNVC: 2
1966-5: RNCC: 5 | RNVC: 9
5738720003: RNCC: 5 | RNVC: 9

17 Mar 1993

5120-12-123-5181
Open End Wrench

121235181
6580060: RNCC: 3 | RNVC: 2
14-0808: RNCC: 5 | RNVC: 2
894-1-2: RNCC: 5 | RNVC: 2
TA465: RNCC: 5 | RNVC: 2
571A103B1-2IN: RNCC: 5 | RNVC: 9
1927Z1-2IN: RNCC: 5 | RNVC: 9
610-1-2: RNCC: 5 | RNVC: 9
228222: RNCC: 5 | RNVC: 9
610-1-2: RNCC: 5 | RNVC: 9
610A16: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-185-0086
Craftsman's Tweezers

121850086
9383-120-R: RNCC: 3 | RNVC: 2
5463R: RNCC: 3 | RNVC: 2
T2360: RNCC: 3 | RNVC: 2
H80928-C125-R: RNCC: 5 | RNVC: 2
9 000 508 008: RNCC: 5 | RNVC: 2
V22199-Z-C97: RNCC: 5 | RNVC: 2
V22199ZC97: RNCC: 5 | RNVC: 2
71931/INOX: RNCC: 5 | RNVC: 9

2 Sep 1980

5120-12-381-5300
Socket Wrench Socket

123815300
40AD-5/32: RNCC: 3 | RNVC: 2
01530010: RNCC: 5 | RNVC: 2

1 Mar 2010

5120-12-365-0107
Cross Tip Screwdriver

123650107
4-652: RNCC: 3 | RNVC: 2

23 Nov 2004

5120-12-139-3143
Mechanical Puller

121393143
8205890533: RNCC: 3 | RNVC: 2
002M02000: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-354-9514
Driftpin

123549514
SK155152-301: RNCC: 3 | RNVC: 2

10 Sep 2001

5120-12-182-8411
Entriegelung

121828411
2564601: RNCC: 3 | RNVC: 2

4 Mar 1980

5120-12-178-3103
Mechanical Puller

121783103
0039760: RNCC: 3 | RNVC: 2

12 Apr 1979

5120-12-164-6328
Spanner Wrench

121646328
264-476: RNCC: 3 | RNVC: 2
264-476: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-153-5089
Mechanical Puller

121535089
CH1774-8NM: RNCC: 3 | RNVC: 2
820589416100: RNCC: 5 | RNVC: 2
8205894161/00: RNCC: 5 | RNVC: 2
CH1774-8NM: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-394-5193
Mounting Punch

123945193
1030229-993000.001.0: RNCC: 3 | RNVC: 2

9 Dec 2013

5120-12-175-2184
Spanner Wrench

121752184
WA150: RNCC: 3 | RNVC: 2
149120403: RNCC: 5 | RNVC: 2
149120403: RNCC: 5 | RNVC: 2

30 Aug 1978

5120-12-185-0088
Mechanical Puller

121850088
4543-2: RNCC: 3 | RNVC: 2
43-2: RNCC: 3 | RNVC: 2
01.52.25.93: RNCC: 5 | RNVC: 2
7280002: RNCC: 5 | RNVC: 2

2 Sep 1980

5120-12-312-2168
Werkst Druckstueck

123122168
VW472/2: RNCC: 3 | RNVC: 2

4 Dec 1987

5120-12-367-9350
Socket Wrench Set

123679350
40A/9/4: RNCC: 3 | RNVC: 2

8 Nov 2005

5120-12-363-9035
Bearing And Bushing Inserter And Remover

123639035
T670P5001243: RNCC: 3 | RNVC: 2

4 Aug 2004

5120-12-155-9503
Socket Wrench Extension

121559503
NM297-02: RNCC: 3 | RNVC: 2
NM297-02: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-196-4247
Box Wrench

121964247
103-621-0105-000: RNCC: 3 | RNVC: 2

6 Jul 1983

5120-12-392-2687
Claw Bar

123922687
0714631010: RNCC: 3 | RNVC: 2

22 May 2013

5120-12-305-7871
Bearing And Bushing Inserter

123057871
1423-200.102: RNCC: 3 | RNVC: 2
1423-200.1024: RNCC: 5 | RNVC: 2

13 Dec 1985

5120-12-152-0708
Dorn

121520708
23111-7199.01: RNCC: 2 | RNVC: 2
23111-7199.01: RNCC: 3 | RNVC: 2
23111-7199-01: RNCC: 5 | RNVC: 9
23111-7199.01: RNCC: 5 | RNVC: 9
23111-7199-01: RNCC: 5 | RNVC: 9
23111-7199-01: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-183-7357
Montagestab

121837357
1000042-197000.01: RNCC: 3 | RNVC: 2
1000042-197000-01: RNCC: 5 | RNVC: 2

15 May 1980

5120-12-368-9301
Pliers

123689301
30 11 190: RNCC: 3 | RNVC: 2
00.14.24.66: RNCC: 5 | RNVC: 2
00.14.27.69: RNCC: 5 | RNVC: 2
00.15.07.52: RNCC: 5 | RNVC: 2
00.15.08.53: RNCC: 5 | RNVC: 2

8 May 2006

5120-12-321-9227
Open End Wrench

123219227
790015477: RNCC: 3 | RNVC: 2
61280-60: RNCC: 5 | RNVC: 9

10 Jul 1990

5120-12-339-9228
Socket Head Screw Key

123399228
2300232-992000.026.0: RNCC: 2 | RNVC: 2
2300232-992000.026.0: RNCC: 3 | RNVC: 2

1 Feb 1996

5120-12-381-7711
Bearing And Bushing Inserter And Remover

123817711
225263: RNCC: 3 | RNVC: 2
RM 9200 T 001: RNCC: 5 | RNVC: 2

29 Mar 2010

5120-12-338-2624
Bearing And Bushing Inserter And Remover

123382624
2.72-34 742: RNCC: 3 | RNVC: 2

13 Jun 1995

5120-12-371-0787
Hand Hammer

123710787
5081080250: RNCC: 3 | RNVC: 2
00.72.55.77: RNCC: 5 | RNVC: 2
5081.08 1/4: RNCC: 5 | RNVC: 2

6 Feb 2007

5120-12-365-5300
Swivel Knob Jeweler's Screwdriver

123655300
T4875X ESD0X60: RNCC: 3 | RNVC: 2

12 Jan 2005

5120-12-365-9153
Swivel Knob Jeweler's Screwdriver

123659153
T4880X 324: RNCC: 3 | RNVC: 2

17 Feb 2005

5120-12-120-0716
Hand Shovel

30 May 1969

5120-12-325-9028
Combination Box And Open End Wrench

123259028
2060160: RNCC: 3 | RNVC: 2

22 Jul 1991

5120-12-194-8851
Handbetaetig Klaue

121948851
5100225-210: RNCC: 2 | RNVC: 2
5100225-210: RNCC: 3 | RNVC: 2
5100225-210: RNCC: 5 | RNVC: 9

15 Dec 1982

5120-12-147-1920
Ge Federstabzieher

121471920
23176-264160-00-0: RNCC: 2 | RNVC: 2
23176-264160.00.0: RNCC: 2 | RNVC: 2
23176-264160-00-0: RNCC: 5 | RNVC: 2
23176-264160.00.0: RNCC: 5 | RNVC: 2
23176-264160-00-0: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-310-0018
Socket Wrench Screwdriver Attachment

123100018
58688090: RNCC: 3 | RNVC: 2
IN19-9: RNCC: 3 | RNVC: 2
F30006253: RNCC: 5 | RNVC: 2

27 Mar 1987

5120-12-162-2328
Lamp Extractor

121622328
1067: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-126-2532
Pipe Vise

121262532
634A103-1-4-4: RNCC: 3 | RNVC: 2
4969-4: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-158-1042
Spanner Wrench

121581042
SS2876-2: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-312-8798
Magnetic Retrieving Tool

123128798
05654005: RNCC: 3 | RNVC: 9

16 Feb 1988

5120-12-390-6229
Cross Tip Screwdriver

123906229
159.1027: RNCC: 3 | RNVC: 2

28 Nov 2012

5120-12-362-1115
Hose Strap Band Clamping Tool

123621115
MK9SST: RNCC: 3 | RNVC: 2
255-2711: RNCC: 5 | RNVC: 2

12 Jan 2004

5120-12-383-6599
Cantilever Jaw Clamp

123836599
KF2: RNCC: 3 | RNVC: 2

19 Nov 2010

5120-12-300-8084
Socket Wrench

123008084
03.364.21.02.0: RNCC: 3 | RNVC: 2
03-339-03-0: RNCC: 5 | RNVC: 9

31 Aug 1984

5120-12-198-3599
Mechanical Puller

121983599
5259207: RNCC: 3 | RNVC: 2
52-59207-3: RNCC: 5 | RNVC: 2

19 Jan 1984

5120-12-126-4334
Socket Wrench

121264334
14018930900: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-196-7052
Screw Thread Insert Extractor

121967052
TL5120-0116-1: RNCC: 2 | RNVC: 2
01803000000: RNCC: 3 | RNVC: 2
C5791 395 B: RNCC: 5 | RNVC: 2

4 Aug 1983

5120-12-126-4941
Hand Hammer

121264941
VG95211-ML-121264941: RNCC: 2 | RNVC: 2
53614020: RNCC: 3 | RNVC: 2
0017501-0250: RNCC: 3 | RNVC: 2
4016671007091: RNCC: 5 | RNVC: 2
5274-250: RNCC: 5 | RNVC: 2
175-250: RNCC: 5 | RNVC: 9
53614-2: RNCC: 5 | RNVC: 9
17501250: RNCC: 5 | RNVC: 9
5089-250: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-123-5437
Socket Wrench

121235437
NO PRIMARY REF 12-123-5437: RNCC: 3 | RNVC: 2
106044: RNCC: 5 | RNVC: 9
2035PZ: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-311-9054
Mechanical Puller

123119054
4900073-074000: RNCC: 2 | RNVC: 2

29 Oct 1987

5120-12-174-1991
Socket Head Screw Key

121741991
NO PRIMARY REF 12-174-1991: RNCC: 3 | RNVC: 2
105952: RNCC: 5 | RNVC: 9
1997MB7: RNCC: 5 | RNVC: 9

12 Jun 1978

5120-12-163-8892
Spanner Wrench

121638892
VG95211-ML-121638892: RNCC: 2 | RNVC: 2
1X56 131 403: RNCC: 3 | RNVC: 2
1X56131403: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-301-4555
Hand Tube Flaring Tool

123014555
NO PRIMARY REF 12-301-4555: RNCC: 3 | RNVC: 2
4482-45M: RNCC: 5 | RNVC: 9

16 Oct 1984

5120-12-123-5012
Open End Wrench

121235012
DIN895-55X60: RNCC: 2 | RNVC: 2
00895556036: RNCC: 3 | RNVC: 2
1250191: RNCC: 5 | RNVC: 2
55X60DIN895: RNCC: 5 | RNVC: 2
860N0228: RNCC: 5 | RNVC: 9
B32106: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-388-5489
Torque Wrench

123885489
008.011: RNCC: 3 | RNVC: 2

29 Mar 2012

5120-12-356-4916
Seal Inserter

123564916
MTPA7703M5000002: RNCC: 3 | RNVC: 2

5 Mar 2002

5120-12-311-9638
Socket Wrench Attachment Universal Joint

123119638
884: RNCC: 3 | RNVC: 2

5 Nov 1987

5120-12-373-9293
Hand Terminal Crimping Tool

123739293
9700215B: RNCC: 3 | RNVC: 2
4003773006503: RNCC: 5 | RNVC: 2

19 Dec 2007

5120-12-129-7393
Fliehge Schluessel

121297393
64033131400018: RNCC: 3 | RNVC: 9

30 May 1969

5120-12-342-1973
Socket Wrench Set

123421973
616-734: RNCC: 3 | RNVC: 2

2 Jan 1997

5120-12-368-1111
Torque Wrench Adapter

123681111
58211014-TCS: RNCC: 3 | RNVC: 2

8 Dec 2005

5120-12-175-3720
Electronic Equipment Alignment Tool

121753720
118.2535.00: RNCC: 3 | RNVC: 2
HS8342-2: RNCC: 3 | RNVC: 2

11 Sep 1978

5120-12-381-9080
Rubber Mallet

123819080
70140003: RNCC: 3 | RNVC: 2
10940-75: RNCC: 5 | RNVC: 2
4018754041251: RNCC: 5 | RNVC: 2

16 Apr 2010

5120-12-177-1684
Grommet Inserting Punch And Die

121771684
3630044: RNCC: 3 | RNVC: 9
8885-36: RNCC: 5 | RNVC: 9

17 Jan 1979

5120-12-362-4592
Combination Box And Open End Wrench

123624592
54.0084.960.47: RNCC: 3 | RNVC: 2
13-13: RNCC: 5 | RNVC: 2

26 Feb 2004

5120-12-378-8391
Socket Head Screw Key Set

123788391
071531120: RNCC: 3 | RNVC: 2
0159510903000: RNCC: 3 | RNVC: 2
A0715 31 120: RNCC: 5 | RNVC: 2
159S-9L: RNCC: 5 | RNVC: 2
391417115103: RNCC: 6 | RNVC: 9

18 May 2009

5120-12-149-5852
Socket Wrench

121495852
NO PRIMARY REF 12-149-5852: RNCC: 3 | RNVC: 2
105148: RNCC: 5 | RNVC: 9
1936M26X27: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-198-7596
Flat Tip Screwdriver

121987596
NO PRIMARY REF 12-198-7596: RNCC: 3 | RNVC: 2
8000-1X7X100: RNCC: 5 | RNVC: 9

23 Feb 1984

5120-12-158-4945
Mechanical Puller

121584945
CH1310-1-10: RNCC: 3 | RNVC: 2
1205 0715: RNCC: 3 | RNVC: 2
12050715: RNCC: 5 | RNVC: 2
3.418.0.018.022.6: RNCC: 5 | RNVC: 2
CH1310-1-10: RNCC: 5 | RNVC: 9
3-418-0-018-022-4: RNCC: 5 | RNVC: 9
30-9012-02: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-388-9307
Bearing And Bushing Inserter

123889307
80996040318: RNCC: 3 | RNVC: 2
80.99604-0318: RNCC: 5 | RNVC: 2

8 May 2012

5120-12-382-7532
Flat Tip Screwdriver

123827532
46601065-TCS: RNCC: 3 | RNVC: 2

4 Aug 2010

5120-12-168-6803
Montagevorrichtung

121686803
IR915005: RNCC: 3 | RNVC: 2

28 Mar 1977

5120-12-155-9523
Justier Stift

121559523
NM380-01: RNCC: 3 | RNVC: 2
NM380-01: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-387-4288
Crimping Tool Die

123874288
D50: RNCC: 3 | RNVC: 2

14 Dec 2011

5120-12-003-1008

5120-12-363-9695
Bearing And Bushing Inserter

123639695
T671P5002214: RNCC: 3 | RNVC: 2

7 Aug 2004

5120-12-366-3620
Hand Hammer

123663620
5036040060: RNCC: 3 | RNVC: 2
5036.04.0060: RNCC: 5 | RNVC: 2

14 Apr 2005

5120-12-196-7197
Open End Wrench

121967197
VS18B: RNCC: 3 | RNVC: 2
VS18: RNCC: 5 | RNVC: 2
VS18: RNCC: 5 | RNVC: 9

8 Aug 1983

5120-12-342-6792
Screwdriver Bit

123426792
49TX-T30: RNCC: 3 | RNVC: 2
02100030: RNCC: 5 | RNVC: 2

13 Mar 1997

5120-12-358-8972
Electrical Contact Remover

123588972
80996060291: RNCC: 3 | RNVC: 2

26 Nov 2002

5120-12-153-6767
Socket Wrench

121536767
12-34: RNCC: 3 | RNVC: 2
74ZU16: RNCC: 5 | RNVC: 2
0263-506-2-17: RNCC: 5 | RNVC: 2
MC21-18: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-120-6607
Ausrichtwerk Griff

121206607
TL5120-0108: RNCC: 2 | RNVC: 2
JD5120-12-120-6607: RNCC: 3 | RNVC: 2
267-0013-4: RNCC: 5 | RNVC: 9
599: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-344-7733
Spanner Wrench

123447733
971-00100: RNCC: 3 | RNVC: 2

8 Dec 1997

5120-12-339-1121
Lamp Extractor

123391121
SIZ890-9F621-04: RNCC: 3 | RNVC: 2
9F621-04: RNCC: 5 | RNVC: 2

11 Oct 1995

5120-12-387-5580
Socket Wrench

123875580
137.00274: RNCC: 3 | RNVC: 2

10 Jan 2012

5120-12-146-6807
Kalibrier- Dorn

121466807
4015890015: RNCC: 3 | RNVC: 2
401589001500: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-367-6268
Pike Pole

123676268
AST 450: RNCC: 3 | RNVC: 2

14 Sep 2005

5120-12-010-1540

5120-12-194-2810
Blindni Mundstueck

121942810
GS 2000-8B: RNCC: 3 | RNVC: 9
GS2000-8B: RNCC: 5 | RNVC: 9

19 Oct 1982

5120-12-186-7364
Buegel

121867364
99395001: RNCC: 3 | RNVC: 2
WU130: RNCC: 5 | RNVC: 2
41-130: RNCC: 5 | RNVC: 2
410280: RNCC: 5 | RNVC: 9
410280: RNCC: 5 | RNVC: 9

2 Feb 1981

5120-12-171-1064
Socket Wrench Socket

121711064
1X56 137 830: RNCC: 3 | RNVC: 2
80996030077: RNCC: 5 | RNVC: 2
8208482: RNCC: 5 | RNVC: 2
8470344: RNCC: 5 | RNVC: 2
80.99603-0077: RNCC: 5 | RNVC: 2
1X56-137-830: RNCC: 5 | RNVC: 2
1X56-137-830: RNCC: 5 | RNVC: 2
1X56-136-625: RNCC: 5 | RNVC: 9
1X56136625: RNCC: 5 | RNVC: 9
1X56-136-625: RNCC: 5 | RNVC: 9

9 Sep 1977

5120-12-194-0639
Open End Box Wrench

121940639
1949Z1/4X5/16: RNCC: 3 | RNVC: 2
130458: RNCC: 5 | RNVC: 2

28 Sep 1982

5120-12-173-0335
Spanner Wrench

121730335
702993-0182901: RNCC: 3 | RNVC: 2
702993-0182.901: RNCC: 5 | RNVC: 2

15 Mar 1978

5120-12-190-7316
Spanner Wrench

121907316
4900144-12000: RNCC: 2 | RNVC: 2
332104-8170.901: RNCC: 3 | RNVC: 2
332104-8170-901: RNCC: 5 | RNVC: 9
332104-8170.901: RNCC: 5 | RNVC: 9

10 Dec 1981

5120-12-376-4278
Ratchet Wrench

123764278
6256980: RNCC: 3 | RNVC: 2
6256980: RNCC: 5 | RNVC: 2
31 KR 30-60: RNCC: 5 | RNVC: 2
31KR 30-60: RNCC: 5 | RNVC: 2

29 Sep 2008

5120-12-319-5385
Open End Wrench

123195385
DIN894-100: RNCC: 2 | RNVC: 2
894-100: RNCC: 3 | RNVC: 2
657 824: RNCC: 5 | RNVC: 2

10 Oct 1989

5120-12-157-3295
Dorn

121573295
25704-360460.02.0: RNCC: 2 | RNVC: 2
25704-360460.02.0: RNCC: 3 | RNVC: 2
02065: RNCC: 3 | RNVC: 2
25704-360460-02-0: RNCC: 5 | RNVC: 2
25704-360460.02.0: RNCC: 5 | RNVC: 2
25704-360460-02-0: RNCC: 5 | RNVC: 2
02065: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-177-2189
Socket Wrench Socket

121772189
NO PRIMARY REF 12-177-2189: RNCC: 3 | RNVC: 2
01720093: RNCC: 5 | RNVC: 9
40EL6BA: RNCC: 5 | RNVC: 9

19 Jan 1979

5120-12-131-7994
Grommet Inserting Punch And Die

121317994
1500010: RNCC: 3 | RNVC: 2
3630037: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-120-0713

5120-12-139-3146

5120-12-123-5606

5120-12-379-5365
Open End Wrench

123795365
6673150: RNCC: 3 | RNVC: 2
04010886667316: RNCC: 5 | RNVC: 2
04010886667316: RNCC: 5 | RNVC: 2
6673150: RNCC: 5 | RNVC: 2
DS 3114 41: RNCC: 5 | RNVC: 2
DS 3114 41: RNCC: 5 | RNVC: 2
4010886667316: RNCC: 5 | RNVC: 9

5 Aug 2009

5120-12-140-2230

5120-12-339-9689
Mechanical Puller

123399689
5070189: RNCC: 3 | RNVC: 2
698-423-0010: RNCC: 5 | RNVC: 2

7 Feb 1996

5120-12-349-9195
Mechanical Puller Attachment

123499195
45.002.36.122: RNCC: 3 | RNVC: 2

26 Jan 2000

5120-12-127-2138

5120-12-364-6785
Socket Wrench Extension

123646785
13011003-TCS: RNCC: 3 | RNVC: 2

20 Oct 2004

5120-12-333-5675
Seal Inserter

123335675
1841601: RNCC: 3 | RNVC: 2

6 Jan 1994

5120-12-134-2658
Socket Wrench

121342658
027M06500: RNCC: 3 | RNVC: 2
VM59199: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-384-1209
Hand Hammer

123841209
140.6510: RNCC: 3 | RNVC: 2

24 Jan 2011

5120-12-371-5238
Spanner Wrench

123715238
71007549: RNCC: 3 | RNVC: 2

12 Apr 2007

5120-12-385-3542
Shaf Mounting Tool

123853542
F30370689: RNCC: 3 | RNVC: 2

25 May 2011

5120-12-153-4995
Ausbauvorrichtung

121534995
CH1919-8: RNCC: 3 | RNVC: 2
CH1919-8: RNCC: 5 | RNVC: 9
6-0888-01-3-0105: RNCC: 5 | RNVC: 9
6.0888.01.3.0105: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-316-0539
Socket Head Screw Key

123160539
116305: RNCC: 3 | RNVC: 2

17 Dec 1988

5120-12-364-9204
Screwdriver Bit

123649204
02060010-TCS: RNCC: 3 | RNVC: 2

16 Nov 2004

5120-12-010-9635

5120-12-358-5229
Open End Box Wrench

123585229
24A-1/4X5/16: RNCC: 3 | RNVC: 2
41481620: RNCC: 5 | RNVC: 2

23 Oct 2002

5120-12-326-0173
Mechanical Puller Attachment

123260173
100589003400: RNCC: 3 | RNVC: 2

30 Jul 1991

5120-12-368-8423
Socket Wrench Extension

123688423
770-S15: RNCC: 3 | RNVC: 2
00.52.06.65: RNCC: 5 | RNVC: 2

27 Apr 2006

5120-12-022-0315

5120-12-094-1290

5120-12-383-6971
Mechanical Puller

123836971
1X56.095.079: RNCC: 3 | RNVC: 2

25 Nov 2010

5120-12-155-8343
Schluessel

121558343
25704-360300.11.0: RNCC: 2 | RNVC: 2
25704-360300.11.0: RNCC: 3 | RNVC: 2
25704-360300.11.0: RNCC: 3 | RNVC: 2
25704-360300-11-0: RNCC: 3 | RNVC: 2
25704-360300-11-0: RNCC: 5 | RNVC: 2
25704-360300.11.0: RNCC: 5 | RNVC: 9
25704-360300-11-0: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-382-9416
Shovel Handle

123829416
5100086-20: RNCC: 2 | RNVC: 2
18025A010: RNCC: 6 | RNVC: 9

26 Aug 2010

5120-12-195-2220
Flat Tip Screwdriver

121952220
DIN7437-0,5X2,3: RNCC: 2 | RNVC: 9
52728VDE020/2,3: RNCC: 3 | RNVC: 2
0,5X2,3DIN7437: RNCC: 5 | RNVC: 9

26 Jan 1983

5120-12-391-2951
Socket Wrench Socket

123912951
2871-E24: RNCC: 3 | RNVC: 2
4000896148783: RNCC: 5 | RNVC: 2

4 Mar 2013

5120-12-133-3660
Ein- Und Ausbauvorr

121333660
665-181: RNCC: 3 | RNVC: 2
S629-143-420: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-345-3737
Catch Lever Tool

123453737
F6 277205: RNCC: 3 | RNVC: 2

10 Mar 1998

5120-12-002-0134

5120-12-338-6315
Mechanical Puller Step Plate

123386315
7-637-1903-101: RNCC: 3 | RNVC: 2
7-637-1903-101: RNCC: 5 | RNVC: 9

7 Aug 1995

5120-12-130-6315
Open End Wrench

121306315
C20407-Z9-A2: RNCC: 3 | RNVC: 2
LG142632: RNCC: 3 | RNVC: 2
WZ38: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-359-9236
Drive Pin Punch Set

123599236
985100: RNCC: 3 | RNVC: 2

20 Mar 2003

5120-12-336-5865
Montierdorn

123365865
0852 5012: RNCC: 3 | RNVC: 2
8525012: RNCC: 5 | RNVC: 2

28 Nov 1994

5120-12-349-4025
Bearing And Bushing Inserter And Remover

123494025
0986611993: RNCC: 3 | RNVC: 2

10 Nov 1999

5120-12-153-2545
Socket Head Screw Key

121532545
40-08006: RNCC: 3 | RNVC: 2
40-08006: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-126-4934
Hand Hammer

121264934
53607010: RNCC: 3 | RNVC: 2
5266-375: RNCC: 5 | RNVC: 2
53607-1: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-176-1114
Spannblock

121761114
40-204A: RNCC: 3 | RNVC: 2

9 Nov 1978

5120-12-349-6638
Open End Wrench

123496638
42-80023-000(M): RNCC: 3 | RNVC: 2

15 Dec 1999

5120-12-190-6069
Socket Wrench Crowfoot Attachment

121906069
873589000300: RNCC: 3 | RNVC: 2
5120700070: RNCC: 5 | RNVC: 2

7 Dec 1981

5120-12-390-1863
Mechanical Puller Adapter

123901863
F6370986: RNCC: 3 | RNVC: 2

12 Oct 2012

5120-12-303-8263
Abstimmwerkzeugsatz

123038263
5800748-969: RNCC: 2 | RNVC: 2
5800748-969: RNCC: 3 | RNVC: 2

6 May 1985

5120-12-365-0765
Socket Head Screw Key

123650765
05138263001: RNCC: 3 | RNVC: 2
367-BO-TX25X100: RNCC: 5 | RNVC: 2
367-BOTX25: RNCC: 5 | RNVC: 9
138263: RNCC: 5 | RNVC: 9

25 Nov 2004

5120-12-339-9690
Ge Montierwerkzeug

123399690
5070783: RNCC: 3 | RNVC: 2
698-429-0000: RNCC: 5 | RNVC: 2

7 Feb 1996

5120-12-005-1673

5120-12-324-4520
Hand Beading Tool

123244520
VN210-5: RNCC: 3 | RNVC: 2
NV1-030749-5: RNCC: 5 | RNVC: 2

18 Feb 1991

5120-12-343-8658
Box Wrench Set

123438658
K475-6W: RNCC: 3 | RNVC: 2
00475992082: RNCC: 5 | RNVC: 2

7 Aug 1997

5120-12-305-8816
Hand Blind Riveter

123058816
KW-006 OHNE ZUBEHOER: RNCC: 3 | RNVC: 2

30 Dec 1985

5120-12-336-5529
Seal Inserter

123365529
5870 055 074: RNCC: 3 | RNVC: 2
5870-055-074: RNCC: 5 | RNVC: 2

28 Nov 1994

5120-12-365-3305
Mechanical Puller Attachment

123653305
5583593: RNCC: 3 | RNVC: 2
(241)A42495583593: RNCC: 8 | RNVC: 2
5583593: RNCC: 8 | RNVC: 2

21 Dec 2004

5120-12-371-9014
Spatula

123719014
327210: RNCC: 3 | RNVC: 2

29 May 2007

5120-12-374-6147
Ratchet Wrench

123746147
F30006205: RNCC: 3 | RNVC: 2

29 Feb 2008

5120-12-182-8378

5120-12-351-2762
Spanner Wrench

123512762
3099-111000.09: RNCC: 3 | RNVC: 2
3099-00-111000.09: RNCC: 5 | RNVC: 2

10 Jul 2000

5120-12-151-6592
Montagevorrichtung

121516592
WKW9009-0105V1: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-194-0691
Screwdriver Bit

121940691
990SLG-12: RNCC: 3 | RNVC: 2
617589001000: RNCC: 5 | RNVC: 2
2487170012: RNCC: 5 | RNVC: 2
990-12SLG: RNCC: 5 | RNVC: 2
1054 M12 DB: RNCC: 5 | RNVC: 9

29 Sep 1982

5120-12-367-1084
Montierwerk Huelse

123671084
0907769: RNCC: 3 | RNVC: 2

11 Jul 2005

5120-12-350-3063
Sp Montierwerkzeug

123503063
2300223-264201.00.0: RNCC: 2 | RNVC: 2
2300223-264201.00.0: RNCC: 3 | RNVC: 2

15 Mar 2000

5120-12-133-4649
Spanner Wrench

121334649
5185891407: RNCC: 3 | RNVC: 2
023M01300: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-026-5925

5120-12-381-6454
Socket Wrench Set

123816454
1430-AU: RNCC: 3 | RNVC: 2

11 Mar 2010

5120-12-133-3661
Tragstueck

121333661
859A181: RNCC: 3 | RNVC: 2
S595A230-30: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-191-7981
Screwdriver Bit

121917981
990-16: RNCC: 3 | RNVC: 2
54X16: RNCC: 3 | RNVC: 2
2487170007: RNCC: 5 | RNVC: 2
03060016: RNCC: 5 | RNVC: 2
50-33M16: RNCC: 5 | RNVC: 2
00503310: RNCC: 5 | RNVC: 2

5 Mar 1982

5120-12-163-5523
Socket Head Screw Key

121635523
510195-000-45: RNCC: 2 | RNVC: 2
169126104: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-321-0463
Hole Sheet Metal Holder

123210463
AT500-53: RNCC: 3 | RNVC: 2

21 Mar 1990

5120-12-120-2216
Hand Tube Flaring Tool

121202216
NO PRIMARY REF 12-120-2216: RNCC: 3 | RNVC: 2
162A: RNCC: 5 | RNVC: 9
96634101: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-370-2068
Spanner Wrench

123702068
D0104349-001: RNCC: 3 | RNVC: 2

2 Oct 2006

5120-12-152-7790
Schluessel

121527790
510070-20303: RNCC: 2 | RNVC: 2

30 May 1969

5120-12-166-1974
Schluessel

121661974
23303-266400.00: RNCC: 2 | RNVC: 2
2817-138: RNCC: 3 | RNVC: 2
23303-266400.00: RNCC: 5 | RNVC: 2
23303-266400-00: RNCC: 5 | RNVC: 9
23303-266400.02: RNCC: 5 | RNVC: 9
23303-266400-00: RNCC: 5 | RNVC: 9
23303-266400-02: RNCC: 5 | RNVC: 9

12 Aug 1976

5120-12-131-6979
Schluessel

121316979
499-202-3108: RNCC: 3 | RNVC: 2
499202-3108: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-340-7468
Hand Terminal Crimping Tool

123407468
WZ41-11: RNCC: 3 | RNVC: 2

4 Jun 1996

5120-12-306-2311
Flat Tip Screwdriver

123062311
NM256-34: RNCC: 3 | RNVC: 2
JD5120-12-306-2311: RNCC: 5 | RNVC: 2
NM256-34: RNCC: 5 | RNVC: 9

7 Feb 1986

5120-12-163-3916
Einstellvorrichtung

121633916
510195-250-00: RNCC: 2 | RNVC: 2
169104403: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-133-7241
Open End Wrench

121337241
NO PRIMARY REF 12-133-7241: RNCC: 3 | RNVC: 2
1931M18: RNCC: 5 | RNVC: 9
104933: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-366-8569
Socket Wrench

123668569
29A1-2X9-16: RNCC: 3 | RNVC: 2

15 Jun 2005

5120-12-171-2823
Mechan Druckstueck

121712823
105-31762W1.02: RNCC: 3 | RNVC: 2
105-31762W1-02: RNCC: 5 | RNVC: 2

26 Sep 1977

5120-12-171-2148
Griff

121712148
83.09144-6094: RNCC: 3 | RNVC: 2
83091446094: RNCC: 3 | RNVC: 2

19 Sep 1977

5120-12-133-2711
Stanz- Stempelsatz

121332711
TL5120-0059-17: RNCC: 2 | RNVC: 2
STPLL21: RNCC: 3 | RNVC: 2
705201080: RNCC: 5 | RNVC: 2
STPLL21: RNCC: 5 | RNVC: 9
5120-0059-20: RNCC: 5 | RNVC: 9
5120-059-20: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-362-4431
Magnetic Retrieving Tool

123624431
TL5120-0131-008: RNCC: 2 | RNVC: 2
T1355: RNCC: 3 | RNVC: 2
353/01: RNCC: 5 | RNVC: 2

25 Feb 2004

5120-12-342-2434
Seal Inserter

123422434
80996170071: RNCC: 3 | RNVC: 2
80.99617-0071: RNCC: 5 | RNVC: 2

9 Jan 1997

5120-12-391-1720
Mechanical Puller

123911720
F6785514: RNCC: 3 | RNVC: 2

25 Feb 2013

5120-12-369-2805
Mechanical Puller

123692805
80996026005: RNCC: 3 | RNVC: 2
80.99602-6005: RNCC: 5 | RNVC: 2

14 Jun 2006

5120-12-163-6594
Abziehvorrichtung

121636594
26-21C1016G001: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-338-2039
Slip Joint Pliers

123382039
7150223: RNCC: 3 | RNVC: 2
121/250 A3 P: RNCC: 3 | RNVC: 2
8701250: RNCC: 3 | RNVC: 2
87 01 250: RNCC: 5 | RNVC: 9

6 Jun 1995

5120-12-348-6482
Socket Wrench Set

123486482
KD626-120: RNCC: 3 | RNVC: 2

29 Jul 1999

5120-12-154-0446
Halter

121540446
510306-0000-01: RNCC: 2 | RNVC: 2
510306-0000-01: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-134-5103
Open End Wrench

121345103
499204-3254: RNCC: 2 | RNVC: 2
499204-3254: RNCC: 3 | RNVC: 2
499204-3254: RNCC: 5 | RNVC: 2
499204-3254: RNCC: 5 | RNVC: 9
100: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-391-8569
Pipe Mounting Tool

123918569
RTMT0-02-16: RNCC: 3 | RNVC: 2

12 Apr 2013

5120-12-130-3295
Flat Tip Screwdriver

121303295
333-36-29: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-390-7171
Socket Wrench

123907171
6216-0104: RNCC: 3 | RNVC: 2

5 Dec 2012

5120-12-163-1487
Auszieher

121631487
H21E19K: RNCC: 3 | RNVC: 2
0001840190: RNCC: 5 | RNVC: 2
0001840190: RNCC: 5 | RNVC: 2
0001840190: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-356-7165
Combination Box And Open End Wrench

123567165
13-35: RNCC: 3 | RNVC: 2

26 Mar 2002

5120-12-196-7381
Bearing And Bushing Inserter

121967381
1X56119917: RNCC: 3 | RNVC: 2
0535660: RNCC: 5 | RNVC: 2
535660: RNCC: 5 | RNVC: 9

9 Aug 1983

5120-12-320-9362
Craftsman's Tweezers

123209362
71765-AM: RNCC: 3 | RNVC: 2
727550-AM: RNCC: 3 | RNVC: 2
250A-10-1001: RNCC: 5 | RNVC: 2
250A-10-1001: RNCC: 5 | RNVC: 9
71765-AM: RNCC: 5 | RNVC: 9

7 Mar 1990

5120-12-361-1943
Boerdelwer Einsatz

123611943
80996060066: RNCC: 3 | RNVC: 2
80.99606-0066: RNCC: 5 | RNVC: 2

2 Sep 2003

5120-12-121-1093
Flat Tip Screwdriver

121211093
8000-6X75: RNCC: 3 | RNVC: 2
131475: RNCC: 5 | RNVC: 2
147-1: RNCC: 5 | RNVC: 9
1149P75X6: RNCC: 5 | RNVC: 9
1149P1X6X75: RNCC: 5 | RNVC: 9
17122: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-304-6135
Hand Hammer

123046135
50479-3-0: RNCC: 3 | RNVC: 2
50488-2-0: RNCC: 5 | RNVC: 2

5 Aug 1985

5120-12-301-6858
Mechanical Puller

123016858
2125-9806-000: RNCC: 3 | RNVC: 2
2125-9806-000: RNCC: 5 | RNVC: 9

1 Nov 1984

5120-12-179-9683
Halter

121799683
143220: RNCC: 3 | RNVC: 2
80996220008: RNCC: 5 | RNVC: 2
80.99622-0008: RNCC: 5 | RNVC: 2

14 Aug 1979

5120-12-369-9234
Trowel

123699234
716 160 00: RNCC: 3 | RNVC: 2
02.33.47.67: RNCC: 5 | RNVC: 2
716-160: RNCC: 5 | RNVC: 2

28 Aug 2006

5120-12-379-0893
Bearing Staking Installation Tool

123790893
F30450446: RNCC: 3 | RNVC: 2

23 Jun 2009

5120-12-319-3405
Mechanical Puller

123193405
99347052: RNCC: 3 | RNVC: 2

25 Sep 1989

5120-12-156-1601
Box Wrench

121561601
NM286-06: RNCC: 3 | RNVC: 2
NM286-06: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-121-8260
Open End Wrench

121218260
NO PRIMARY REF 12-121-8260: RNCC: 3 | RNVC: 2
105044: RNCC: 5 | RNVC: 9
1932WM8X7: RNCC: 5 | RNVC: 9
00690: RNCC: 5 | RNVC: 9
1203110008: RNCC: 5 | RNVC: 9
330-8X7: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-310-8767
Wuergezangenteil

123108767
S4-1301A: RNCC: 3 | RNVC: 2
1301: RNCC: 5 | RNVC: 2

3 Jul 1987

5120-12-192-4722
Torque Wrench

121924722
DSH II: RNCC: 3 | RNVC: 2
DSH-II1-4IN4KT: RNCC: 5 | RNVC: 2
077560: RNCC: 5 | RNVC: 9
7411A: RNCC: 5 | RNVC: 9

27 Apr 1982

5120-12-388-5843
Cross Tip Screwdriver

123885843
26454: RNCC: 3 | RNVC: 2
313-PZ1-300: RNCC: 5 | RNVC: 2

3 Apr 2012

5120-12-364-3371
Socket Wrench Socket

123643371
02010009-TCS: RNCC: 3 | RNVC: 2

11 Sep 2004

5120-12-363-9283
Bearing And Bushing Inserter

123639283
T670P5001291: RNCC: 3 | RNVC: 2

5 Aug 2004

5120-12-358-2709
Hand Strainer Removing Hook

123582709
5X56000095: RNCC: 3 | RNVC: 2
131502: RNCC: 5 | RNVC: 2

7 Oct 2002

5120-12-023-0179

5120-12-344-7910
Socket Wrench

123447910
DIN22417-A-M6: RNCC: 2 | RNVC: 2
941-00037: RNCC: 3 | RNVC: 2

9 Dec 1997

5120-12-144-6089
Mechanical Puller

121446089
8375891733-00: RNCC: 3 | RNVC: 2
8375891733: RNCC: 5 | RNVC: 2
006M01600: RNCC: 5 | RNVC: 2
837589173300: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-172-3933
Box Wrench

121723933
30-79350-5156: RNCC: 3 | RNVC: 2

19 Jan 1978

5120-12-124-1869
Adjustable Wrench

121241869
429BECU22-200: RNCC: 3 | RNVC: 2
429BECU22-200: RNCC: 3 | RNVC: 9
280-200: RNCC: 5 | RNVC: 9
651-200: RNCC: 5 | RNVC: 9
5120-42072: RNCC: 6 | RNVC: 9

30 May 1969

5120-12-154-2568
Spanner Wrench

121542568
5191154-260: RNCC: 2 | RNVC: 2

30 May 1969

5120-12-196-8455
Socket Head Screw Key

121968455
159-15MM: RNCC: 3 | RNVC: 2
43219: RNCC: 3 | RNVC: 2
20412: RNCC: 5 | RNVC: 2
25102 15: RNCC: 5 | RNVC: 9
911CVB15: RNCC: 5 | RNVC: 9

24 Aug 1983

5120-12-337-4857
Flat Tip Screwdriver

123374857
20005410: RNCC: 3 | RNVC: 2
600 054 10: RNCC: 5 | RNVC: 2

9 Mar 1995

5120-12-157-6770
Kabelschuhh Matrize

121576770
B25WHK5: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-321-7858
Bearing And Bushing Inserter

123217858
41408-T601: RNCC: 3 | RNVC: 2

26 Jun 1990

5120-12-387-6817
Mechanical Puller

123876817
23540434: RNCC: 3 | RNVC: 2

24 Jan 2012

5120-12-328-1197
Bearing And Bushing Remover

123281197
75993-06085: RNCC: 3 | RNVC: 2

8 Apr 1992

5120-12-322-0782
Spanner Wrench

123220782
264-1275: RNCC: 3 | RNVC: 2
196214: RNCC: 5 | RNVC: 2

20 Jul 1990

5120-12-165-1601
Socket Head Screw Key

121651601
5801111-12: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-345-5144
Inserted Hammer Face

123455144
10956R-40: RNCC: 3 | RNVC: 2
79 05 00 40: RNCC: 5 | RNVC: 2

26 Mar 1998

5120-12-123-5455
Socket Wrench Handle Bar

121235455
DIN900-A25: RNCC: 2 | RNVC: 2
26D-25: RNCC: 3 | RNVC: 2
52185250: RNCC: 5 | RNVC: 2
620947: RNCC: 5 | RNVC: 2
99250310251: RNCC: 5 | RNVC: 2
90494: RNCC: 5 | RNVC: 9
26D25C: RNCC: 5 | RNVC: 9
A25DIN900: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-354-1143
Schluessel

123541143
B59990: RNCC: 3 | RNVC: 2

6 Jun 2001

5120-12-359-9491
Socket Wrench Handle Ratchet Head

123599491
2500261-183480.003.0: RNCC: 2 | RNVC: 2
2500261-183480.003.0: RNCC: 3 | RNVC: 2

24 Mar 2003

5120-12-183-2186
Flat Tip Screwdriver

121832186
3040-7: RNCC: 3 | RNVC: 2
320-991352-01: RNCC: 3 | RNVC: 2
42563: RNCC: 5 | RNVC: 2

28 Mar 1980

5120-12-123-5792
Socket Wrench Socket

121235792
NO PRIMARY REF 12-123-5792: RNCC: 3 | RNVC: 2
110724: RNCC: 5 | RNVC: 9
180950: RNCC: 5 | RNVC: 9
9500DZ2 3/8: RNCC: 5 | RNVC: 9
9500SZ2 3-8: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-186-1927
Halter

121861927
160200: RNCC: 3 | RNVC: 2
3-114-KHD: RNCC: 5 | RNVC: 2

5 Dec 1980

5120-12-199-6638
Mechanical Puller

121996638
54-200: RNCC: 3 | RNVC: 2
88070-2: RNCC: 5 | RNVC: 2
000 589 88 33 00: RNCC: 5 | RNVC: 2
000589883300: RNCC: 5 | RNVC: 2

19 May 1984

5120-12-010-1548

5120-12-177-3657
Mechanical Puller

121773657
0276179000: RNCC: 3 | RNVC: 9
S000276179000000: RNCC: 5 | RNVC: 2

29 Jan 1979

5120-12-139-3032
Spanner Wrench

121393032
8205891107: RNCC: 3 | RNVC: 2
023M02900: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-317-6068
Box Wrench

123176068
03.339.04.01.0: RNCC: 3 | RNVC: 2
0333904010: RNCC: 5 | RNVC: 2
0700307: RNCC: 5 | RNVC: 2

20 Apr 1989

5120-12-390-7709
Socket Head Screw Key Set

123907709
05022720001: RNCC: 3 | RNVC: 2
3950PKL/9: RNCC: 5 | RNVC: 2

10 Dec 2012

5120-12-159-9972
Socket Wrench

121599972
0003-4150-030: RNCC: 3 | RNVC: 2
0003-4150-030: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-322-6028
Elektron Auszieher

123226028
NO PRIMARY REF 12-322-6028: RNCC: 3 | RNVC: 2
C22107-A119-C32: RNCC: 5 | RNVC: 9

5 Sep 1990

5120-12-368-9296
Slip Joint Pliers

123689296
81 03 230: RNCC: 3 | RNVC: 2
00.13.41.80: RNCC: 5 | RNVC: 2

8 May 2006

5120-12-370-4173
Slip Joint Pliers

123704173
65544375: RNCC: 3 | RNVC: 2

6 Nov 2006

5120-12-370-9243
Cross Tip Screwdriver

123709243
113PZ3: RNCC: 3 | RNVC: 2
11319: RNCC: 5 | RNVC: 2
4001002113190: RNCC: 5 | RNVC: 2

17 Jan 2007

5120-12-303-2307
Pliers

123032307
71997: RNCC: 3 | RNVC: 9

7 Mar 1985

5120-12-182-7782
Ratchet Screwdriver

121827782
52870200: RNCC: 3 | RNVC: 9

25 Feb 1980

5120-12-316-7251
Ratchet Wrench

123167251
NO PRIMARY REF 12-316-7251: RNCC: 3 | RNVC: 2
31KR20: RNCC: 5 | RNVC: 9

7 Feb 1989

5120-12-172-3930
Socket Wrench Crowfoot Attachment

121723930
30-79350-0211: RNCC: 3 | RNVC: 2

19 Jan 1978

5120-12-172-6205
Open End Wrench

121726205
30-79350-0091: RNCC: 3 | RNVC: 2

31 Jan 1978

5120-12-309-7127
Socket Wrench Socket

123097127
F362200140143: RNCC: 3 | RNVC: 2
F362200140143: RNCC: 5 | RNVC: 2
F362200140143: RNCC: 5 | RNVC: 2

18 Feb 1987

5120-12-002-0652

5120-12-005-0336

5120-12-187-6262
Tap And Reamer Wrench

121876262
DIN 1814-4GD-ZN: RNCC: 2 | RNVC: 9
401 28 55: RNCC: 3 | RNVC: 9
70 GROESZE 4: RNCC: 3 | RNVC: 9
13549040: RNCC: 3 | RNVC: 9
131 075: RNCC: 3 | RNVC: 9
243 GROESZE 4: RNCC: 5 | RNVC: 9

21 Apr 1981

5120-12-135-5229
Slip Joint Pliers

121355229
84A3: RNCC: 3 | RNVC: 2
8272-165 C: RNCC: 3 | RNVC: 2
673862: RNCC: 5 | RNVC: 2
132114: RNCC: 5 | RNVC: 9
14450: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-392-7544
Electrical Contact Remover

123927544
5M.8939.220.55: RNCC: 3 | RNVC: 2
JIC-2257: RNCC: 5 | RNVC: 2

4 Jul 2013

5120-12-177-5791
Box Wrench

121775791
UHD304-44: RNCC: 3 | RNVC: 2
UHD304-44: RNCC: 5 | RNVC: 9

7 Feb 1979

5120-12-130-4873
Lamp Extractor

121304873
60E5-1423: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-152-0721
Hose Strap Band Clamping Tool

121520721
MK III: RNCC: 3 | RNVC: 2
110-03500: RNCC: 5 | RNVC: 2
KR6-8MA: RNCC: 5 | RNVC: 2
111-00010: RNCC: 5 | RNVC: 9
111-00010: RNCC: 5 | RNVC: 9
K6-8CA68155: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-175-5202
Dorn

121755202
VG95211-ML-121755202: RNCC: 2 | RNVC: 2
EV4-833: RNCC: 3 | RNVC: 2
EV4-833: RNCC: 5 | RNVC: 9

25 Sep 1978

5120-12-133-3612
Open End Wrench

121333612
NO PRIMARY REF 12-133-3612: RNCC: 3 | RNVC: 2
105819: RNCC: 5 | RNVC: 9
1953M25X28: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-356-7139
Dreh Haltewerkzeug

123567139
425589003100: RNCC: 3 | RNVC: 2

26 Mar 2002

5120-12-157-6782

5120-12-146-9896
Open End Wrench

121469896
NM283-04: RNCC: 3 | RNVC: 2
25035205: RNCC: 5 | RNVC: 2
NM283-04: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-304-4243
Socket Wrench

123044243
NO PRIMARY REF 12-304-4243: RNCC: 3 | RNVC: 2
28LA: RNCC: 5 | RNVC: 9
622931: RNCC: 5 | RNVC: 9

16 Jul 1985

5120-12-362-1464
Socket Wrench Socket

123621464
7800SM-36: RNCC: 3 | RNVC: 2
1098087: RNCC: 5 | RNVC: 2

14 Jan 2004

5120-12-154-9337
Adapter

121549337
072M00900: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-385-9350
Socket Head Screw Key Set

123859350
I002485: RNCC: 3 | RNVC: 2

22 Jul 2011

5120-12-318-8822
We Montierwerkzeug

123188822
000-941-93-27: RNCC: 3 | RNVC: 2

22 Aug 1989

5120-12-151-6548
Einstellvorrichtung

121516548
1004V5: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-364-5639
Combination Box And Open End Wrench

123645639
40082929-TCS: RNCC: 3 | RNVC: 2

9 Oct 2004

5120-12-331-6054
Seal Inserter

123316054
80996040124: RNCC: 3 | RNVC: 2
80.99604.0124: RNCC: 5 | RNVC: 2
V1119: RNCC: 5 | RNVC: 2

27 May 1993

5120-12-123-5140
Open End Wrench

121235140
DIN894-7: RNCC: 2 | RNVC: 2
894-7: RNCC: 3 | RNVC: 2
7DIN894: RNCC: 5 | RNVC: 2
TVA5120-2-263-025.1.1.2: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-172-2792
Flat Tip Screwdriver

121722792
335929-9012.000: RNCC: 3 | RNVC: 2
1240-10000W5: RNCC: 5 | RNVC: 2
1240-10000W5: RNCC: 5 | RNVC: 2
335929-9029.000: RNCC: 5 | RNVC: 2
335929-9012.000: RNCC: 5 | RNVC: 9

10 Jan 1978

5120-12-373-4049
Flat Tip Screwdriver

123734049
379-7: RNCC: 3 | RNVC: 2

30 Oct 2007

5120-12-355-9023
Socket Wrench Adapter

123559023
8235.2.30.00: RNCC: 3 | RNVC: 2
54.0084.989.27: RNCC: 5 | RNVC: 2

3 Jan 2002

5120-12-174-2736
Pliers

121742736
3-634-8: RNCC: 3 | RNVC: 2
1900TRM: RNCC: 3 | RNVC: 2

19 Jun 1978

5120-12-384-2156
Hand Hammer

123842156
5077030003: RNCC: 3 | RNVC: 2
5077.03-3: RNCC: 5 | RNVC: 2

3 Feb 2011

5120-12-368-6499
Combination Box And Open End Wrench

123686499
203A-9/16: RNCC: 3 | RNVC: 2
00.31.42.38: RNCC: 5 | RNVC: 2

4 Apr 2006

5120-12-336-0106
Blindn Nietzugkopf

123360106
770230: RNCC: 3 | RNVC: 2
77 023-HN35: RNCC: 5 | RNVC: 2

12 Oct 1994

5120-12-123-5188
Open End Wrench

121235188
894-1: RNCC: 3 | RNVC: 2
610A32: RNCC: 5 | RNVC: 9
610A32: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-173-7543
Hydraulic Jack Handle

121737543
310.031.6: RNCC: 3 | RNVC: 2
0005833745: RNCC: 5 | RNVC: 2
37960.3: RNCC: 5 | RNVC: 9
38378-3: RNCC: 5 | RNVC: 9
0005833245: RNCC: 5 | RNVC: 9

8 May 1978

5120-12-341-3609
Seal Inserter

123413609
80996066019: RNCC: 3 | RNVC: 2
9200914000: RNCC: 3 | RNVC: 2
920091-4000: RNCC: 5 | RNVC: 2

28 Aug 1996

5120-12-307-2780
Retaining Ring Pliers

123072780
2461-C6: RNCC: 3 | RNVC: 9

28 May 1986

5120-12-172-2179
Drive Pin Punch

121722179
3644-130: RNCC: 3 | RNVC: 2
107474: RNCC: 5 | RNVC: 2
D4DIN6458: RNCC: 5 | RNVC: 9

3 Jan 1978

5120-12-330-4051
Torque Wrench

123304051
591801-9080.000: RNCC: 3 | RNVC: 2

11 Dec 1992

5120-12-365-5304
Ph Schraubendreher

123655304
T4961: RNCC: 3 | RNVC: 2

12 Jan 2005

5120-12-190-3134
Mechanical Puller

121903134
206-2: RNCC: 3 | RNVC: 2
136-4: RNCC: 3 | RNVC: 2
5130700003: RNCC: 5 | RNVC: 2
116-4: RNCC: 5 | RNVC: 9

19 Nov 1981

5120-12-198-7519
Lager- Und Einsatz

121987519
5870057011: RNCC: 3 | RNVC: 2
790511477: RNCC: 5 | RNVC: 2
026043: RNCC: 5 | RNVC: 2
5870-057-011: RNCC: 5 | RNVC: 2
5870057011: RNCC: 5 | RNVC: 9

23 Feb 1984

5120-12-370-6233
Trowel

123706233
748 020 00: RNCC: 3 | RNVC: 2
02.33.61.81: RNCC: 5 | RNVC: 2

1 Dec 2006

5120-12-135-5427

5120-12-371-7324
Bearing And Bushing Inserter

123717324
80996040106: RNCC: 3 | RNVC: 2
80.99604-0106: RNCC: 5 | RNVC: 2

9 May 2007

5120-12-127-0855
Box Wrench

121270855
NO PRIMARY REF 12-127-0855: RNCC: 3 | RNVC: 2
41463234: RNCC: 5 | RNVC: 9
22A1-2X9-16: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-393-7384
Carrier Socket

123937384
031.008.0-3: RNCC: 3 | RNVC: 2
3155433: RNCC: 5 | RNVC: 2
03155433: RNCC: 5 | RNVC: 2

8 Oct 2013

5120-12-197-3406
Schutzbackenbaugrup

121973406
0203D101544/1-1: RNCC: 3 | RNVC: 2

13 Oct 1983

5120-12-345-6398
Box Wrench

123456398
2300211-991012.000.0: RNCC: 2 | RNVC: 2
2300211-991012.000.0: RNCC: 3 | RNVC: 2

7 Apr 1998

5120-12-311-3456
Socket Wrench Socket

123113456
32-60: RNCC: 3 | RNVC: 2
55-60: RNCC: 3 | RNVC: 2

20 Aug 1987

5120-12-308-2269
Wrench Extension Handle

123082269
5801813-918000: RNCC: 2 | RNVC: 2
R506-HA550: RNCC: 3 | RNVC: 2

17 Sep 1986

5120-12-182-2053
Socket Wrench

121822053
DIN896-B11X13: RNCC: 2 | RNVC: 9
210-11X13: RNCC: 3 | RNVC: 2
00.38.25.42: RNCC: 5 | RNVC: 2
B11X13DIN896: RNCC: 5 | RNVC: 9

18 Jan 1980

5120-12-346-9894
Plier Clamp

123469894
589-275: RNCC: 3 | RNVC: 2
05890001: RNCC: 5 | RNVC: 2

8 Oct 1998

5120-12-314-6497
Bearing And Bushing Inserter And Remover

123146497
E11.49021-0264: RNCC: 3 | RNVC: 2
11.49021-0264: RNCC: 5 | RNVC: 2
11.49021-0264: RNCC: 5 | RNVC: 2

26 Jul 1988

5120-12-123-5620
Socket Wrench

121235620
NO PRIMARY REF 12-123-5620: RNCC: 3 | RNVC: 2
26-13X15: RNCC: 5 | RNVC: 9
01330: RNCC: 5 | RNVC: 9
430-13X15: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-158-5927
Screw Thread Insert Extractor

121585927
TL5120-0116-3: RNCC: 2 | RNVC: 2
01803020000: RNCC: 3 | RNVC: 2
01801020000: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-317-1560
Flat Tip Screwdriver

123171560
NO PRIMARY REF 12-317-1560: RNCC: 3 | RNVC: 2
169188: RNCC: 5 | RNVC: 9

14 Mar 1989

5120-12-196-6333
Torque Wrench Adapter

121966333
22-310-1Y-04: RNCC: 3 | RNVC: 2

25 Jul 1983

5120-12-324-4719
Drive Pin Punch

123244719
335910-0103.000: RNCC: 2 | RNVC: 2
335910-0103.000: RNCC: 3 | RNVC: 2
335910-0103.000: RNCC: 5 | RNVC: 9

20 Feb 1991

5120-12-158-9734
Flat Tip Screwdriver

121589734
66451: RNCC: 3 | RNVC: 2
700-3C: RNCC: 3 | RNVC: 2
01.75.04.44: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-155-0189
Schluessel

121550189
54-2201-673-00: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-319-9814
Rivet Bucking Bar

123199814
737: RNCC: 3 | RNVC: 2

24 Nov 1989

5120-12-368-2071
Retaining Ring Pliers

123682071
65436001-TCS: RNCC: 3 | RNVC: 2

6 Jan 2006

5120-12-366-5854
Mechanical Puller

123665854
314410: RNCC: 3 | RNVC: 2
0852-03-15-00/35: RNCC: 5 | RNVC: 2

11 May 2005

5120-12-179-9689
Fuehrung

121799689
80996060098: RNCC: 3 | RNVC: 2
142480-1: RNCC: 5 | RNVC: 2
80.99606-0098: RNCC: 5 | RNVC: 2

14 Aug 1979

5120-12-172-6856
Spanner Wrench

121726856
S51524-0000: RNCC: 3 | RNVC: 2

13 Feb 1978

5120-12-389-4633
Track Shoe Adjusting Tool

123894633
7997027-990945.000.0: RNCC: 3 | RNVC: 2

10 Jul 2012

5120-12-350-1000
Spanner Wrench

123501000
AFG072124-01: RNCC: 3 | RNVC: 2

15 Feb 2000

5120-12-335-2894
Aligning Punch

123352894
0851 6210: RNCC: 3 | RNVC: 2
8516210: RNCC: 5 | RNVC: 2

4 Aug 1994

5120-12-144-5315
Trommelde Hebezange

121445315
0003-3403-170: RNCC: 3 | RNVC: 2
0003-3403-170: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-156-1515
Hand Hammer

121561515
NM226-11: RNCC: 3 | RNVC: 2
NM226-11: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-180-1617
Screwdriver Bit

121801617
991-14: RNCC: 3 | RNVC: 2
3041 14: RNCC: 3 | RNVC: 2
54CV14: RNCC: 3 | RNVC: 2
50-34-14: RNCC: 3 | RNVC: 2
03090014: RNCC: 5 | RNVC: 2
00050340683: RNCC: 5 | RNVC: 2
2487180013: RNCC: 5 | RNVC: 9

27 Aug 1979

5120-12-312-9986
Torque Wrench Adapter

123129986
000589260100: RNCC: 3 | RNVC: 2

24 Feb 1988

5120-12-377-8444
Spanner Wr Adapter

123778444
F30379298: RNCC: 3 | RNVC: 2

16 Feb 2009

5120-12-134-2742
Winkel- Hebel

121342742
038M01900: RNCC: 3 | RNVC: 2
VM65671: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-700-6687
Hand Hydraulic Jack

127006687
54-60034513786: RNCC: 2 | RNVC: 2

6 Oct 1992

Load More Results