What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.

What is a Grommet Inserting Punch And Die?

A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Blacksmith's Punch?

A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Tap Extractor?

A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Mechanical Finger?

A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

A Crowbar is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hand Caulking Tool?

A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Screwdriver And Wrench Assembly?

A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Drill Drift?

A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

What is a Fuse Puller?

A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.

What is a Hand Lead Seal Press?

A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.

What is a Hand Beading Tool?

A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.

Hand Tools, Nonedged, Nonpowered - Germany (DE)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by Germany (DE) - NCB is 12

Page 54 of 62

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by Germany

51	20	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - Germany (DE)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 15 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Hand Vise? 31 Items: A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.
What is a Grommet Inserting Punch And Die? 25 Items: A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.
What is a Hand Hydraulic Jack? 111 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 93 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 587 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 13 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
What is a Hand Tube Flaring Tool? 32 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Blacksmith's Punch? 17 Items: A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.
What is a Drain Plug Wrench? 21 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 76 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 14 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 1670 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
What is a Pipe Wrench? 54 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 165 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 55 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
What is a Tap Extractor? 13 Items: A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.
Screwdriver,Offset 77 Items
What is a Screwdriver Bit? 446 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Mechanical Finger? 17 Items: A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.
What is a Socket Wrench Socket? 1303 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 876 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 1273 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 17 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 282 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
What is a Hand Tube Bender? 49 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 669 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 39 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pinch Bar? 17 Items: A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.
What is a Wrecking Bar? 10 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Crowbar? 12 Items: A Crowbar is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 356 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 484 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 37 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 110 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
What is a Hand Caulking Tool? 13 Items: A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.
Face,Hammer,Inserted 54 Items
What is a Hole Sheet Metal Holder? 40 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Screwdriver And Wrench Assembly? 10 Items: A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.
What is a Hand Rivet Set? 62 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Drill Drift? 11 Items: A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.
What is a Socket Wrench Handle Bar? 160 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Stake,Sheet Metalworking 33 Items
Riveter,Blind,Hand 31 Items
What is a Hand Shovel? 24 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 37 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 20 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
Block,Dolly,Sheet Metalworking 33 Items
What is a Piston Ring Compressor? 61 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Fuse Puller? 22 Items: A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.
What is a Hand Lead Seal Press? 12 Items: A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.
What is a Hand Beading Tool? 54 Items: A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.
What is a Hand Hammer? 406 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
Head,Hand Hammer 11 Items
What is a Lamp Extractor? 95 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Carpenters' Pincers? 16 Items: A Carpenters' Pincers (PINCERS,CARPENTERS') is a plierlike hand tool having two opposing jaws which may have hammerlike backs. One handle has a nail or tack pulling claw, the other is shaped to form a screwdriver. The tool may contain a wire cutter. See also NIPPERS, END CUTTING and PINCERS, FARRIERS'.
What is a Farrier's Pincers? 20 Items: A Farrier's Pincers (PINCERS,FARRIER'S) is a plierlike hand tool having two opposing jaws which are designed for removing horseshoes. The handles may have plain or ball ends. See also NIPPERS, END CUTTING and PINCERS, CARPENTERS'.
What is a Hand Pipe And Sewer Auger? 15 Items: A Hand Pipe And Sewer Auger (AUGER,PIPE AND SEWER,HAND) is a flexible spring wire or tape, with a cleaning or boring head at one or both ends. A handle may be provided for turning and pushing. It may also include a metal housing and/or reel in which the tape is coiled. Excludes AUGER, WATER CLOSET, HAND.
What is a Hand Roller? 23 Items: A Hand Roller (ROLLER,HAND) is a hand-held item consisting of a roller on an axle attached to a handle. The width of the roller face (surface) is more than 1/4 inch. See also STITCHER, CEMENTING AND VULCANIZING. Excludes INKING ROLLER, HAND and paint rollers.
What is a Trowel? 36 Items: A Trowel is a tool used for bricklaying, concrete work, plastering, linoleum laying, and masonry work. Excludes CORNER TOOL, CONCRETE.
What is a Hand Abrasive Wheel Dresser? 11 Items: A Hand Abrasive Wheel Dresser (DRESSER,ABRASIVE WHEEL,HAND) is a tool designed to remove glaze from, dress, shape, sharpen, and true solid abrasive wheels. Excludes NIB, DIAMOND, WHEEL DRESSING.
What is a Lamp Cap Extractor? 26 Items: A Lamp Cap Extractor (EXTRACTOR,LAMP CAP) is a tool specifically designed to facilitate the removal of lamp caps from switchboards, panels or indicator lamps.
Replacing Tool,Engine Valve Seat Insert 10 Items
What is a Rivet Bucking Bar? 20 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 154 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 175 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Woven Cable Grip? 30 Items: A Woven Cable Grip (GRIP,CABLE,WOVEN) is a braided wire device designed to clutch a bare or insulated conductor, cable or wire rope, for holding taut or drawing through conduit.
What is a Screw Thread Insert Extractor? 16 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is a Hand Helical Spring Puller Hook? 12 Items: A Hand Helical Spring Puller Hook (HOOK,HELICAL SPRING PULLER,HAND) is a hook whose curved end conforms to Style AP10 of Reference Drawing Group AP.
What is an Electron Tube Extractor? 12 Items: An Electron Tube Extractor (EXTRACTOR,ELECTRON TUBE) is a hand tool designed to facilitate the removal of electron tubes from electronic equipment and to avoid burning the fingers. It may be used for installing tubes.
What is a Cross Tip Screwdriver? 224 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 208 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 61 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 163 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Tool Handle Wedge? 42 Items: A Tool Handle Wedge (WEDGE,TOOL HANDLE) is excludes WEDGE, WOOD.
What is a Valve Tappet Adjusting Tool? 14 Items: A Valve Tappet Adjusting Tool (ADJUSTING TOOL,VALVE TAPPET) is a hand device for adjusting overhead valve tappets of internal combustion engines. It consists of a handle, and at one end a wrench opening or a drive for a replaceable wrench socket, and a knob operated screwdriver tip. The wrench opening (or socket) engages the tappet adjusting screw lock nut and the screwdriver engages the screw.
What is a Hand Powered Poppet Valve Lapper? 16 Items: A Hand Powered Poppet Valve Lapper (LAPPER,POPPET VALVE,HAND POWERED) is a hand tool designed to rotate and/or oscillate poppet type valves in their seats for reseating purposes.
What is a Marlinespike? 11 Items: A Marlinespike is a metal hand tool made in the shape of a tapered pin. One end is pointed and the opposite end may be headed. The body may contain an eye for a lanyard sling, or be grooved lengthwise. Excludes CABLE PICK and FID.
What is an Aligning Punch? 104 Items: An Aligning Punch (PUNCH,ALIGNING) is a round, square, hexagonal or octagonal bodied hand tool, having a round tapered section 6-1/2 inches (165.1 mm) or more in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, DRIFT and DRIFTPIN.
What is a Drift Punch? 39 Items: A Drift Punch (PUNCH,DRIFT) is a round, square, hexagonal, or octagonal bodied hand tool, having a round tapered section 4 to 6 inches (101.6 mm to 152.4 mm) inclusive in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, ALIGNING; and DRIFTPIN.
What is a Socket Wrench Adapter-Extension? 11 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 21 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 149 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Wrench Extension Handle? 36 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Crowfoot Wrench Head Socket? 13 Items: A Crowfoot Wrench Head Socket (SOCKET,CROWFOOT WRENCH HEAD) is a component with an open-wall opening having one end designed to fit into a HEAD, CROWFOOT SOCKET WRENCH and the other end having an internal opening such as hexagonal or 8-point. See also CROWFOOT ATTACHMENT, SOCKET WRENCH.
What is a Socket Wrench Crowfoot Attachment? 267 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 18 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 40 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 35 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 998 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 350 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 102 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 468 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 42 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand-Operated Grommet And Eyelet Press? 14 Items: A Hand-Operated Grommet And Eyelet Press (PRESS,GROMMET AND EYELET,HAND-OPERATED) is a device which punches or pierces holes and in addition fastens or sets eyelets and grommets in cloth, paper and similar material. May be used for fastening or setting rivets, lacing hooks and snaps in cloth, paper and similar material. It is hand operated by lever or screw action. See also PUNCH, EYELET, PLIER TYPE and PRESS, GROMMET AND EYELET, FOOT OPERATED.
What is a Claw Bar? 27 Items: A Claw Bar (BAR,CLAW) is before using, refer to Reference Drawing Group AG.
What is a Pin Vise? 12 Items: A Pin Vise (VISE,PIN) is a clamping device used to hold small items which are usually round. The device consists of a hollow handle having a chuck at one or both ends. The longitudinal axis of the hollow handle is in alignment with that of the chuck(s).
What is a Dapping Punch? 16 Items: A Dapping Punch (PUNCH,DAPPING) is an item consisting of steel bar having one end ball shaped. It is used to form flat metal sheets into a hemispherical shape by working it against a die and striking the opposite end of punch with a hammer.
What is a Tire Iron? 29 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 123 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Machinist's Vise? 64 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Clamp Base Bench Vise? 10 Items: A Clamp Base Bench Vise (VISE,BENCH,CLAMP BASE) is a clamping device consisting of a base, one stationary and one manual screw actuated jaw, and one or more guide bars or rods. Designed with an integral clamp for attaching to a bench, table, or the like. Does not include pipe holding jaws.
What is a Fixed Open End Wrench Set? 61 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Socket Wrench Set? 241 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is a Combination Box And Open End Wrench Set? 48 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Box Wrench Set? 32 Items: A Box Wrench Set (WRENCH SET,BOX) is a group of box wrenches having different characteristics. It may include a HANDLE, EXTENSION WRENCH. See also WRENCH SET, COMBINATION, BOX AND OPEN END.
Spoon,Body And Fender 15 Items
What is a Wrench Kit? 26 Items: A Wrench Kit is an assortment of various types and sizes of wrenches such as SOCKET, SOCKET WRENCH; WRENCH, OPEN END, FIXED; WRENCH, BOX and the like. It may include adapter(s), ratchet(s) and the like. See also WRENCH SET (as modified.
What is a Screw Extractor Set? 14 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 24 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
Jack,Scissors,Hand 17 Items
Pick,Digging 13 Items
What is a Hand Intrenching Tool? 13 Items: A Hand Intrenching Tool (INTRENCHING TOOL,HAND) is a shovel type tool or a pick and shovel combination having standard cutting blade edges or specially designed blade edges for cutting and chopping. It may have a handgrip on the handle. It is designed to be used by individual soldiers primarily for intrenching. Refer to Reference Drawing Group BG for styles.
What is a Piston Ring Expander? 28 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
What is a Joint Breaking Wedge? 12 Items: A Joint Breaking Wedge (WEDGE,JOINT BREAKING) is refer to Reference Drawing Group A before using item name.
Blade,Saddler's Harness Awl 15 Items
Mallet,Rubber 11 Items
What is a Rack Bar Jack? 24 Items: A Rack Bar Jack (JACK,RACK BAR) is excludes JACK, BUMPER and JACK, REEL, HAND.
What is a Hand Tube Flaring Punch? 15 Items: A Hand Tube Flaring Punch (PUNCH,TUBE FLARING,HAND) is a noncutting tool having a shaped end or section designed to flare the ends of tubes. One type is designed to flare the ends of tubes against a tube sheet, and another to flare tube ends to mate with tube fittings. Includes punch components of FLARING TOOL, TUBE, HAND.
What is a Hose Strap Band Clamping Tool? 14 Items: A Hose Strap Band Clamping Tool (CLAMPING TOOL,STRAP BAND,HOSE) is an item designed to tension and lock metal straps around a rubber hose, and the like. It is also used to clamp and hold fittings therein.
What is a Socket Wrench Handle Ratchet Head? 15 Items: A Socket Wrench Handle Ratchet Head (RATCHET HEAD,SOCKET WRENCH HANDLE) is a reversible ratcheting mechanism having a square external end designed to fit into the internal end of a wrench socket or attachment, and has provisions for a round bar grip, but does not include the bar. When furnished with a bar, see HANDLE, SOCKET WRENCH. Excludes RATCHET ATTACHMENT, SOCKET WRENCH.
What is an Etching Needle? 10 Items: An Etching Needle (NEEDLE,ETCHING) is a styluslike tool mounted in a handle. It is used in preparing metal lithographic plates and photo engravings. See also ETCHING POINT.
What is a Mechanical Puller? 1147 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 505 Items
What is a Slip Joint Pliers? 95 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Jewelers' Pliers? 11 Items: A Jewelers' Pliers (PLIERS,JEWELERS') is a tool having jaws designed for use in the assembly and repair of jewelry, watches, and the like. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 112 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 14 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 16 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 35 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 19 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 32 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 73 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Refrigeration Valve Stem Wrench Socket? 10 Items: A Refrigeration Valve Stem Wrench Socket (SOCKET,WRENCH,REFRIGERATION VALVE STEM) is an item having a 1/4 inch (6.3 mm) square external drive on one end, and a square internal opening at the other end. The outside diameter is specially sized to clear openings in refrigeration valve bonnets and covers for reaching recessed stems. It is designed for use with a ratchet wrench for opening and/or closing square stem refrigeration valves.
What is a Drive Pin Punch Set? 27 Items: A Drive Pin Punch Set (PUNCH SET,DRIVE PIN) is a group of PUNCH, DRIVE PIN having different characteristics.
What is a Mechanical Puller Step Plate? 72 Items: A Mechanical Puller Step Plate (STEP PLATE,MECHANICAL PULLER) is a circular disk, flanged to provide a shoulder, and designed to provide a base for the screw point of a PULLER, MECHANICAL when pulling externally mounted bearings, gears, and the like from hollow shafts or housings. It has a concentric, countersunk hole to accommodate the puller screw point.
What is a Solid Center Punch? 26 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Cable Type Ratchet Lever Puller? 34 Items: A Cable Type Ratchet Lever Puller (PULLER,RATCHET LEVER,CABLE TYPE) is an item consisting of a metal frame and ratchet lever reel to which is attached one end of a flexible cable (wire rope). The cable feeds through the fast eye in the metal frame, and may be reeved through a slip hook tackle hook. See also BINDER, LOAD; HOIST, WIRE ROPE and STRETCHER, WIRE.
What is a Hand Yoke Riveter? 13 Items: A Hand Yoke Riveter (RIVETER,YOKE,HAND) is a hand tool designed to install metallic grommets and/or tubular rivets by forcing the unflanged end of the grommet/rivet outward to form another flange which prevents the grommet/rivet from coming out of the item it has been installed in. The tool uses a pliers type pinching action to form the flange. See also PUNCH, EYELET, PLIER TYPE.
What is a Hand Material Handling Hook? 17 Items: A Hand Material Handling Hook (HOOK,MATERIAL HANDLING,HAND) is a hook whose curved end conforms to Style AP1, AP2, AP3 or AP4 of Reference Drawing Group AP. Excludes HOOK, MANHOLE COVER, HAND; HOOK, WIRE BREAKING, HAND; HOOK, ROCK CRUSHER FEEDING, HAND; HOOK, STRAINER REMOVING, HAND and HOOKS, BAG HANDLING, HAND.
What is a Magnetic Retrieving Tool? 22 Items: A Magnetic Retrieving Tool (RETRIEVING TOOL,MAGNETIC) is a hand-operated magnetic device used to locate and pick up metallic articles, such as bolts, nuts, pins, washers, and the like, in confined spaces. It may be rigid, flexible or adjustable. Excludes FINGER, MECHANICAL.
What is a Mechanical Puller Adapter? 68 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Socket Head Screw Socket Wrench Attachment Wrench Set? 10 Items: A Socket Head Screw Socket Wrench Attachment Wrench Set (WRENCH SET,SOCKET HEAD SCREW SOCKET WRENCH ATTACHMENT) is an assortment of various size SOCKET WRENCH ATTACHMENT, SOCKET HEAD SCREW, and HANDLE, SOCKET WRENCH. It may include universal joints, ratcheting adapters and other attachments used therewith.
What is a Mechanical Puller Forcing Screw? 66 Items: A Mechanical Puller Forcing Screw (FORCING SCREW,MECHANICAL PULLER) is a cylindrical, threaded item which may be headed or headless. It may include a threadless portion. All or part of the unthreaded portion(s) must be of a single diameter equal to or smaller than the maximum major diameter of the threaded portion(s). Headless items must have an external or internal wrenching feature or have a provision to facilitate turning. The item must be designed to exert pressure by screwing motion when used with a mechanical puller.
What is a Screw Thread Insert Inserter? 66 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Flat Tip Screwdriver Set? 18 Items: A Flat Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP) is a group of SCREWDRIVER, FLAT TIP having different characteristics.
What is a Terminal Crimping Tool Contact Positioner? 16 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 25 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is a Screw Thread Insert Tang Breakoff Tool? 37 Items: A Screw Thread Insert Tang Breakoff Tool (TANG BREAKOFF TOOL,SCREW THREAD INSERT) is a punch designed to fit within a coiled wire thread insert to manually or mechanically break off the tang by which the insert was threaded into the hole.
What is a Multiposition Vise? 11 Items: A Multiposition Vise (VISE,MULTIPOSITION) is a clamping device consisting of a workholding head and a base provided with swiveling, tilting, and locking arrangement. Designed to be bolt mounted to a bench, table, or the like and constructed so that the workholding head can be swiveled 360 degrees (6.3 radians) in a horizontal plane and tilted from a normal level position downward at least 90 degrees (1.6 radians), and locked in any desired position within the swiveling and tilting ranges. Intended for use in manufacturing and maintenance of mechanical and electronic parts and assemblies or any light bench work. See also VISE, PATTERNMAKER'S.
What is an Adjustable Wrench? 84 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 177 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 40 Items
Handle,Shovel 22 Items
What is a Torque Wrench Set? 13 Items: A Torque Wrench Set (WRENCH SET,TORQUE) is an assortment or two or more torque wrenches or various sizes. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH; and BIT, SCREWDRIVER.
What is a Retaining Ring Installation Tool? 12 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Bearing And Bushing Inserter? 626 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 59 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 466 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 23 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 18 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 80 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 23 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 12 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 12 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Seal Inserter And Remover? 42 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 158 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is an Electrical Contact Inserter And Remover? 21 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Pin Inserter? 28 Items: A Pin Inserter (INSERTER,PIN) is a hand tool designed to facilitate the insertion of a pin into a hole.
What is a Piston Inserter? 39 Items: A Piston Inserter (INSERTER,PISTON) is a tool designed to permit installation of a piston or piston assembly without damaging the packings or piston.
What is a Spring Inserter And Remover? 23 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 11 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Stud Inserter? 20 Items: A Stud Inserter (INSERTER,STUD) is a device designed to drive in studs. It does not have any facilities for removing or extracting studs. See also INSERTER AND REMOVER, STUD.
What is a Stud Inserter And Remover? 13 Items: A Stud Inserter And Remover (INSERTER AND REMOVER,STUD) is a group of items designed to extract and to drive studs. It may include collets, guides, housings, holders and the like. See also REMOVER SET, STUD and INSERTER, STUD.
What is a Gear Inserter? 10 Items: A Gear Inserter (INSERTER,GEAR) is a hand tool designed to install various gears onto a gearshaft. It may be operated by a pushing or a striking force.
What is a Crimping Tool Die? 145 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is an Electrical Connector Inserter? 10 Items: An Electrical Connector Inserter (INSERTER,ELECTRICAL CONNECTOR) is a hand tool designed to hold an electrical connector, and to assist in the positioning and installation of the connector on a cover, panel or the like.
What is a Float? 11 Items: A Float is a tool used for concrete, plastering and grouting work.
What is a Mechanical Puller Set? 19 Items: A Mechanical Puller Set (PULLER SET,MECHANICAL) is two or more separate PULLER, MECHANICAL of different fixed sizes.
What is a Lifting Pneumatic Bag? 28 Items: A Lifting Pneumatic Bag (PNEUMATIC BAG,LIFTING) is a device made of flexible material designed to lift another item by being placed under the item and being inflated with air or some other gas. It will have a means of being connected to an air or gas source and may include a connector hose, a control valve and/or a pressure regulator.
What is a Lifting Pneumatic Bag Kit? 12 Items: A Lifting Pneumatic Bag Kit (PNEUMATIC BAG KIT,LIFTING) is a collection of items consisting of two or more PNEUMATIC BAG, LIFTING, connecting cords, lanyards, feeding hoses and the like required for lifting an item when normal jacking conditions are not applicable. May include items for packaging the individual parts.
What is a Bearing Staking Installation Tool? 14 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
What is a Sealant Dispenser? 15 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Retaining Ring Pliers Set? 10 Items: A Retaining Ring Pliers Set (PLIERS SET,RETAINING RING) is a group of PLIERS, RETAINING RING having different characteristics.
What is a Pedal Adjustment Tool Compressor? 38 Items: A Pedal Adjustment Tool Compressor (COMPRESSOR,TOOL,PEDAL ADJUSTMENT) is a hand tool having hinged leverage handles designed to compress both ends of a spring to facilitate installation.
What is a Plug Electrical Connector Extractor? 20 Items: A Plug Electrical Connector Extractor (EXTRACTOR,ELECTRICAL CONNECTOR,PLUG) is a hand tool designed to disassemble CONNECTOR, PLUG, ELECTRICAL from a CONNECTOR, RECEPTACLE, ELECTRICAL.
What is a Screwdriver Handle? 12 Items: A Screwdriver Handle (HANDLE,SCREWDRIVER) is an item used to accommodate various types of BIT, SCREWDRIVER. It is designed to rotate a bit that is used for installing or removing screws.
What is a Wire Twister Pliers? 11 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 313 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is a Flat Tip And Cross Tip Screwdriver Set? 22 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is an Oil Filter Wrench? 14 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 442 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Rotating Members Aligning Tool? 29 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
Arm,Handling Tool 16 Items
What is a Splicing Sleeve Compressing Tool? 11 Items: A Splicing Sleeve Compressing Tool (COMPRESSING TOOL,SPLICING SLEEVE) is a hand tool having hinged leverage handles similar to a CUTTER, BOLT or pliers, designed to compress a splicing sleeve when joining the ends of two conductors, or when forming an eye splice in the end of a wire rope. Excludes CRIMPING TOOL, TERMINAL, HAND.
Handle,Hydraulic Jack 30 Items
What is a Manual Impact Wrench? 17 Items: A Manual Impact Wrench (WRENCH,IMPACT,MANUAL) is a manually operated handheld tool consisting of spring-loaded handle and a power-impact head which delivers a torsional impact from either continuous movement of the handle in one direction, or by a reciprocating action. It is used in tightening and loosening fasteners, such as bolts, nuts, and the like. The item may include sockets, extensions and offset fittings, nut runners, and the like.
What is a Torque Screwdriver? 15 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.

Stock Items From Supply Class 5120 Page 54 of 62

5120-12-144-5317
Spanner Wrench

121445317
0003-3681-000: RNCC: 3 | RNVC: 2
0003-3681-000: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-362-7962
Socket Head Screw Key

123627962
ISO2936-14L: RNCC: 2 | RNVC: 2
07153129: RNCC: 3 | RNVC: 2

1 Apr 2004

5120-12-305-6605
Spanner Wrench

123056605
4W2332-A: RNCC: 3 | RNVC: 2
4W2332A: RNCC: 5 | RNVC: 9
4W2332-A: RNCC: 5 | RNVC: 9

2 Dec 1985

5120-12-135-6644
Socket Wrench Set

121356644
NO PRIMARY REF 12-135-6644: RNCC: 3 | RNVC: 2
0005892409: RNCC: 5 | RNVC: 2
96030316: RNCC: 5 | RNVC: 9
50-37-10MEISTERSATZMM: RNCC: 5 | RNVC: 9
50-37-9: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-326-1867
Torque Wrench Adapter

123261867
6420B: RNCC: 3 | RNVC: 2
736/10-1: RNCC: 3 | RNVC: 2
6263420002: RNCC: 5 | RNVC: 2
58261610: RNCC: 5 | RNVC: 2

15 Aug 1991

5120-12-366-2145
Spanner Wrench

123662145
311853: RNCC: 3 | RNVC: 2
0855-03-33-00/35: RNCC: 5 | RNVC: 2

22 Mar 2005

5120-12-185-5500
Montagewerkzeug

121855500
V7060-023-000-7: RNCC: 3 | RNVC: 2

14 Oct 1980

5120-12-165-0256
Craftsman's Tweezers

121650256
3010-145-S: RNCC: 3 | RNVC: 2
5-117: RNCC: 3 | RNVC: 2
5471F145: RNCC: 3 | RNVC: 2
06L295: RNCC: 5 | RNVC: 2
108570: RNCC: 5 | RNVC: 2
0005384530: RNCC: 5 | RNVC: 2
53011145: RNCC: 5 | RNVC: 9
4070-145: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-318-9901
Combination Box And Open End Wrench

123189901
NO PRIMARY REF 12-318-9901: RNCC: 3 | RNVC: 2
14A-1-SPEZ: RNCC: 5 | RNVC: 9
91131110: RNCC: 5 | RNVC: 9

29 Aug 1989

5120-12-173-2284
Haltevorrichtung

121732284
009-017-200-000W35: RNCC: 3 | RNVC: 2

29 Mar 1978

5120-12-126-4800
Electric Melting Pot

121264800
57880-2: RNCC: 3 | RNVC: 2
7272-2LTR: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-149-6173
Open End Wrench

121496173
NO PRIMARY REF 12-149-6173: RNCC: 3 | RNVC: 2
104882: RNCC: 5 | RNVC: 9
1930M16X17: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-371-0080
Screwdriver Bit Set

123710080
4003955431512: RNCC: 3 | RNVC: 2

25 Jan 2007

5120-12-374-4001
Bearing And Bushing Inserter

123744001
105-317371W3: RNCC: 3 | RNVC: 2

13 Feb 2008

5120-12-127-0857
Box Wrench

121270857
NO PRIMARY REF 12-127-0857: RNCC: 3 | RNVC: 2
22A5-8X11-16: RNCC: 5 | RNVC: 9
41463638: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-354-0364
Boiler Tube Wire Brush

123540364
895.351: RNCC: 3 | RNVC: 2
H99-20-037: RNCC: 5 | RNVC: 2

29 May 2001

5120-12-315-8968
Mechanical Puller Attachment

123158968
63-438: RNCC: 3 | RNVC: 2
0009419137: RNCC: 5 | RNVC: 2

6 Dec 1988

5120-12-151-2323
Schluessel

121512323
NB02-014: RNCC: 3 | RNVC: 2
3.607187: RNCC: 3 | RNVC: 2
NB02E14: RNCC: 5 | RNVC: 2
VB02E19: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-135-0030
Mechanical Puller

121350030
40-3: RNCC: 3 | RNVC: 2
40/3: RNCC: 3 | RNVC: 2
150-3: RNCC: 3 | RNVC: 2
781-3: RNCC: 3 | RNVC: 2
08460: RNCC: 5 | RNVC: 2
4938520010: RNCC: 5 | RNVC: 2
52181: RNCC: 5 | RNVC: 2
781-3M: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-155-9533
Socket Head Screw Key

121559533
M460-03: RNCC: 3 | RNVC: 2
M460-03: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-199-8656
Socket Head Screw Key Set

121998656
41 H/7-N: RNCC: 3 | RNVC: 9
52 132010: RNCC: 3 | RNVC: 9
73H/60: RNCC: 5 | RNVC: 9

8 Jun 1984

5120-12-322-0128
Ge Montierwerkzeug

123220128
1X56137539: RNCC: 3 | RNVC: 2

17 Jul 1990

5120-12-379-0369
Terminal Crimping Tool Contact Positioner

123790369
90080148: RNCC: 3 | RNVC: 2

17 Jun 2009

5120-12-363-4337
Combination Box And Open End Wrench Set

123634337
71330250: RNCC: 3 | RNVC: 2

15 Jun 2004

5120-12-140-3020

5120-12-324-9448
Mechanical Puller Attachment

123249448
818-820: RNCC: 3 | RNVC: 2

12 Apr 1991

5120-12-159-7297
Drive Pin Punch

121597297
100211-730-02: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-173-0726
Open End Wrench

121730726
702993-8012901: RNCC: 3 | RNVC: 2
702993-8012.901: RNCC: 5 | RNVC: 2

15 Mar 1978

5120-12-342-1898
Schluessel

123421898
1300835-000-01: RNCC: 2 | RNVC: 2
1300835-000-01: RNCC: 3 | RNVC: 2

24 Dec 1996

5120-12-140-0103
Screw Thread Insert Tang Breakoff Tool

121400103
01585120000: RNCC: 3 | RNVC: 2
01582120000: RNCC: 5 | RNVC: 9
2-112: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-362-4408
Flat Tip Screwdriver

123624408
54.0084.960.26: RNCC: 3 | RNVC: 2
8060VDE-1.2-8-175: RNCC: 5 | RNVC: 2

25 Feb 2004

5120-12-164-8836
Flat Tip Screwdriver

121648836
DIN5265-D-B1,2X6,5: RNCC: 2 | RNVC: 9
70004: RNCC: 3 | RNVC: 2
205-6-0-150: RNCC: 3 | RNVC: 2
8000N-1-2-6-150: RNCC: 5 | RNVC: 9
1-2X6DIN5266: RNCC: 5 | RNVC: 9
DIN5265-A-B1,2X6,5: RNCC: 5 | RNVC: 9
DIN5266-1,2X6: RNCC: 5 | RNVC: 9
205-5: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-303-8641
Combination Box And Open End Wrench

123038641
14-0822-9,5: RNCC: 3 | RNVC: 2
14-0822-9-5: RNCC: 5 | RNVC: 2

9 May 1985

5120-12-358-7768
Bearing And Bushing Inserter

123587768
80996040158: RNCC: 3 | RNVC: 2

13 Nov 2002

5120-12-176-8748
Montagevorrichtung

121768748
110600: RNCC: 3 | RNVC: 2
110600: RNCC: 3 | RNVC: 9
0110600: RNCC: 5 | RNVC: 9

20 Dec 1978

5120-12-165-4209
Plastic Mallet

121654209
268-35: RNCC: 3 | RNVC: 9

29 Apr 1976

5120-12-311-7237
Ge Montierwerkzeug

123117237
80996060257: RNCC: 3 | RNVC: 2
80.99606.0257: RNCC: 5 | RNVC: 2

12 Oct 1987

5120-12-192-7109
Spanner Wrench

121927109
01TC34401: RNCC: 3 | RNVC: 2
01TC30851: RNCC: 5 | RNVC: 9

17 May 1982

5120-12-010-0199

5120-12-305-1659
Valve Spring Compressor

123051659
230-1: RNCC: 3 | RNVC: 2
792-1: RNCC: 3 | RNVC: 2
11066-1: RNCC: 3 | RNVC: 2
121320: RNCC: 5 | RNVC: 2
128-2: RNCC: 5 | RNVC: 9
5747620001: RNCC: 5 | RNVC: 9

3 Oct 1985

5120-12-306-6911
Hydraulic Jack Handle

123066911
36971.3: RNCC: 3 | RNVC: 2
83.09181.6001: RNCC: 5 | RNVC: 2
83091816001: RNCC: 5 | RNVC: 2

20 Mar 1986

5120-12-370-6108
Plier Clamp

123706108
172 280 4: RNCC: 3 | RNVC: 2
00.13.58.00: RNCC: 5 | RNVC: 2

29 Nov 2006

5120-12-130-7401
Screwdriver Bit

121307401
820H8-6: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-147-6744
Socket Wrench

121476744
895-8: RNCC: 3 | RNVC: 2
200-8: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-325-0194
Socket Wrench Screwdriver Attachment

123250194
A7409Z-1/4: RNCC: 3 | RNVC: 2
49A-1/4: RNCC: 3 | RNVC: 2
63 750-1-4: RNCC: 5 | RNVC: 2
637640-1/4: RNCC: 5 | RNVC: 2
176265: RNCC: 5 | RNVC: 2
02450016: RNCC: 5 | RNVC: 2
A7409-1/4: RNCC: 5 | RNVC: 9

22 Apr 1991

5120-12-304-3544
Mechanical Puller Attachment

123043544
KDAW9995/14: RNCC: 3 | RNVC: 2
F30371301: RNCC: 5 | RNVC: 2
F362890371301: RNCC: 5 | RNVC: 2

10 Jul 1985

5120-12-376-3876
Screwdriver Bit

123763876
05002930001: RNCC: 3 | RNVC: 2
83-PH1-PZ1: RNCC: 5 | RNVC: 2
83PH1-PZ1: RNCC: 5 | RNVC: 9

23 Sep 2008

5120-12-335-1941
Drift Punch

123351941
S180ZZ21000-000: RNCC: 3 | RNVC: 2

26 Jul 1994

5120-12-335-2950
Mechanical Puller

123352950
823330101: RNCC: 3 | RNVC: 2

5 Aug 1994

5120-12-124-8499
Ein Gewindespindel

121248499
35-10-02: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-123-5568
Adjustable Wrench

121235568
596-405 350: RNCC: 3 | RNVC: 2
596-350: RNCC: 5 | RNVC: 9
1335-350: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-147-6952
Socket Wrench Socket

121476952
2012-11/32: RNCC: 3 | RNVC: 2
30-11/32: RNCC: 3 | RNVC: 2
623245: RNCC: 5 | RNVC: 2
2012 11/32: RNCC: 5 | RNVC: 9
30-11-32: RNCC: 5 | RNVC: 9
02510022: RNCC: 5 | RNVC: 9
456A-11/32: RNCC: 5 | RNVC: 9
456A11-32: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-151-4008
Schluessel

121514008
38037-09: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-144-6290
Einstellvorrichtung

121446290
2360-264117.00.0: RNCC: 2 | RNVC: 2
2360-264101-00-0: RNCC: 5 | RNVC: 2
2360-264101.00.0: RNCC: 5 | RNVC: 2
2360-264117-00-0: RNCC: 5 | RNVC: 2
2360-264117-00-0: RNCC: 5 | RNVC: 2
2360-264117.00.0: RNCC: 5 | RNVC: 2
2360-264101-00-0: RNCC: 5 | RNVC: 9
2360-264117-00-0: RNCC: 5 | RNVC: 9
2360-264101.00.0: RNCC: 5 | RNVC: 9
2360-264117.00.0: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-163-0290
Socket Wrench Handle

121630290
1993U2: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-359-8815
Ei Fuehrungsplatte

123598815
T623P3003160: RNCC: 3 | RNVC: 2

18 Mar 2003

5120-12-130-6249
Open End Wrench

121306249
LG142629: RNCC: 3 | RNVC: 2
WZ20: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-133-2696
Stanz- Stempelsatz

121332696
TL5120-0059-4: RNCC: 2 | RNVC: 2
30: RNCC: 3 | RNVC: 2
705201020: RNCC: 5 | RNVC: 2
STPLL6: RNCC: 5 | RNVC: 2
STPLL6: RNCC: 5 | RNVC: 9
30: RNCC: 5 | RNVC: 9
5120-0059-5: RNCC: 5 | RNVC: 9
5120-059-5: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-196-6935
Drive Pin Punch

121966935
NO PRIMARY REF 12-196-6935: RNCC: 3 | RNVC: 2
107562: RNCC: 5 | RNVC: 9
3659SP2,4: RNCC: 5 | RNVC: 9

2 Aug 1983

5120-12-310-2568
Socket Wrench

123102568
DIN659-21: RNCC: 2 | RNVC: 2

28 Apr 1987

5120-12-174-2365
Open End Wrench

121742365
8205895407/00: RNCC: 3 | RNVC: 2
820589540700: RNCC: 5 | RNVC: 2

15 Jun 1978

5120-12-133-3621
Open End Wrench

121333621
3114-17: RNCC: 3 | RNVC: 2
S579-17-200: RNCC: 3 | RNVC: 2
61280-17: RNCC: 5 | RNVC: 2
128: RNCC: 5 | RNVC: 2
790014277: RNCC: 5 | RNVC: 2
612800-17: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-364-3375
Socket Wrench Socket

123643375
02010013-TCS: RNCC: 3 | RNVC: 2

11 Sep 2004

5120-12-023-6062

5120-12-346-4115
Mechanical Puller

123464115
14 34 976: RNCC: 3 | RNVC: 2

22 Jul 1998

5120-12-369-1102
Seal Inserter

123691102
0986613241: RNCC: 3 | RNVC: 2

23 May 2006

5120-12-337-1082
Hand Roller

123371082
3058: RNCC: 3 | RNVC: 2

19 Jan 1995

5120-12-170-8008
Socket Head Screw Key

121708008
5100069-004000: RNCC: 3 | RNVC: 2
5100069-004000: RNCC: 5 | RNVC: 2
109912U: RNCC: 5 | RNVC: 9

11 Aug 1977

5120-12-354-8765
Ausdrueckwerkzeug

123548765
2926RT01-1AY: RNCC: 3 | RNVC: 2
2926RT01-1AY: RNCC: 5 | RNVC: 2

31 Aug 2001

5120-12-131-4924
Socket Wrench

121314924
NO PRIMARY REF 12-131-4924: RNCC: 3 | RNVC: 2
129814: RNCC: 5 | RNVC: 9
1945UZ3-8: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-367-5890
Open End Wrench

123675890
10156: RNCC: 3 | RNVC: 2

7 Sep 2005

5120-12-176-7320
Druckstueck

121767320
VG95211-ML-121767320: RNCC: 2 | RNVC: 2
105-21832W1.12: RNCC: 3 | RNVC: 2
105-21832W1-12: RNCC: 5 | RNVC: 2

15 Dec 1978

5120-12-321-8020
Socket Wrench Socket

123218020
C8900-32: RNCC: 3 | RNVC: 2
110554: RNCC: 5 | RNVC: 2
110 554: RNCC: 5 | RNVC: 9

28 Jun 1990

5120-12-321-0461
Hole Sheet Metal Holder

123210461
AT500-51: RNCC: 3 | RNVC: 2

21 Mar 1990

5120-12-137-0819
Socket Wrench

121370819
DIN3112-19: RNCC: 2 | RNVC: 2
003112019000: RNCC: 5 | RNVC: 2
19DIN3112: RNCC: 5 | RNVC: 2
2900M19: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-381-2693
Face Spanner Wrench Socket

123812693
588.51-009001-000: RNCC: 3 | RNVC: 2

27 Jan 2010

5120-12-120-0726
Wood Mallet

121200726
TL5120-0008: RNCC: 2 | RNVC: 2
510196: RNCC: 2 | RNVC: 2
5120-0008: RNCC: 5 | RNVC: 9
5120-008: RNCC: 5 | RNVC: 9
5120-02072: RNCC: 6 | RNVC: 9
5120-02072: RNCC: 6 | RNVC: 9

30 May 1969

5120-12-168-6480
Socket Head Screw Key

121686480
4900059-721230.000.0: RNCC: 2 | RNVC: 2
4900059-721230.000.0: RNCC: 3 | RNVC: 2
4900071-001000: RNCC: 3 | RNVC: 2
4900059-721230.000.0: RNCC: 5 | RNVC: 2
4900071-001000: RNCC: 5 | RNVC: 2
4900059-721230-000-0: RNCC: 5 | RNVC: 2
1413556: RNCC: 5 | RNVC: 2
1413556/4: RNCC: 5 | RNVC: 9
105412U: RNCC: 5 | RNVC: 9

25 Mar 1977

5120-12-092-4439

5120-12-093-7215

5120-12-150-3926
S Haltevorrichtung

121503926
1X46914931: RNCC: 3 | RNVC: 2
V91493-1: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-315-3092
Hand Tube Flaring Tool

123153092
0853 0717: RNCC: 3 | RNVC: 2

11 Oct 1988

5120-12-347-1197
Dreh Haltewerkzeug

123471197
80996050217: RNCC: 3 | RNVC: 2
0986611746: RNCC: 5 | RNVC: 2

29 Oct 1998

5120-12-374-4421
Mechanical Puller Adapter

123744421
906589026300: RNCC: 3 | RNVC: 2

18 Feb 2008

5120-12-306-0109
Socket Wrench Socket

123060109
900AMGT: RNCC: 3 | RNVC: 2
5719750015: RNCC: 5 | RNVC: 2

20 Jan 1986

5120-12-306-6656
Swivel Knob Jeweler's Screwdriver

123066656
2003F-0,25X1,4X18: RNCC: 3 | RNVC: 2
161985: RNCC: 5 | RNVC: 2
2003F1,4: RNCC: 5 | RNVC: 2

19 Mar 1986

5120-12-339-1130
Lager- Und B Griff

123391130
5870 260 004: RNCC: 3 | RNVC: 2
141.5870.260004: RNCC: 5 | RNVC: 2

11 Oct 1995

5120-12-346-9892
Socket Wrench Set

123469892
B530-8-M: RNCC: 3 | RNVC: 2
305/8: RNCC: 3 | RNVC: 2
00530644082: RNCC: 5 | RNVC: 2
3050018: RNCC: 5 | RNVC: 2

8 Oct 1998

5120-12-364-3647
Torque Wrench

123643647
IZO-D-135: RNCC: 3 | RNVC: 2
1845827: RNCC: 5 | RNVC: 2

15 Sep 2004

5120-12-123-5489
Socket Wrench

121235489
DIN3125-3,5: RNCC: 2 | RNVC: 2
342-3,5X125: RNCC: 3 | RNVC: 2
4510002: RNCC: 3 | RNVC: 2
T4734M 035: RNCC: 3 | RNVC: 2
52164035: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-175-2763
Socket Wrench

121752763
1000099-360200.02.0: RNCC: 2 | RNVC: 2
1000099-360200-02-0: RNCC: 5 | RNVC: 2
1000099-360200.02.0: RNCC: 5 | RNVC: 2
1000099-360200.02.0: RNCC: 5 | RNVC: 9
1000099-360200-02-0: RNCC: 5 | RNVC: 9

6 Sep 1978

5120-12-388-2053
Driftpin

123882053
122W727000.003.0: RNCC: 2 | RNVC: 2
122W727000.003.0: RNCC: 3 | RNVC: 2

2 Mar 2012

5120-12-309-2313
Ausdrueckwerkzeug

123092313
3815040024: RNCC: 3 | RNVC: 2
38150 40024: RNCC: 5 | RNVC: 9

29 Dec 1986

5120-12-355-3948
Aufdrueckwerkzeug

123553948
5555201: RNCC: 3 | RNVC: 2

9 Nov 2001

5120-12-313-2987
Bearing And Bushing Inserter

123132987
A10-33-165-00-1W31.01: RNCC: 3 | RNVC: 2
A10-33-165-001W31-01: RNCC: 5 | RNVC: 2
85-801-2014: RNCC: 6 | RNVC: 9

18 Mar 1988

5120-12-363-8414
Mechanical Puller

123638414
T671P5001120: RNCC: 3 | RNVC: 2

30 Jul 2004

5120-12-394-5735
Bearing Receptacle

123945735
182.2179671000: RNCC: 3 | RNVC: 2

13 Dec 2013

5120-12-357-2277
Duese Reiniger

123572277
0986611164: RNCC: 3 | RNVC: 2

23 May 2002

5120-12-131-7530

5120-12-332-8453
Craftsman's Tweezers

123328453
5-006: RNCC: 3 | RNVC: 2

27 Sep 1993

5120-12-123-5996
Socket Wrench Socket

121235996
47A5-8: RNCC: 3 | RNVC: 2
02440036: RNCC: 5 | RNVC: 2
109524: RNCC: 5 | RNVC: 9
176346: RNCC: 5 | RNVC: 9
7410DZ5-8: RNCC: 5 | RNVC: 9
A7410DZ-5/8: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-357-7156
Socket Wrench Crowfoot Attachment

123577156
J0433557D311-000A1-006: RNCC: 3 | RNVC: 2

16 Jul 2002

5120-12-183-0995
Socket Wrench Crowfoot Attachment

121830995
4167680: RNCC: 3 | RNVC: 2

20 Mar 1980

5120-12-126-5426
Zwischen Auszieher

121265426
1875890761: RNCC: 3 | RNVC: 2
1875890761: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-339-8866
Socket Wrench Socket

123398866
NO PRIMARY REF 12-339-8866: RNCC: 3 | RNVC: 2
1000A-1.3/4: RNCC: 5 | RNVC: 9
2389120033: RNCC: 5 | RNVC: 9

29 Jan 1996

5120-12-120-9634
Drive Pin Punch

121209634
JDAL25-150: RNCC: 3 | RNVC: 2
5180-022-7: RNCC: 5 | RNVC: 9
5180-0022-7: RNCC: 5 | RNVC: 9
TL5180-0022-7: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-367-8346
Socket Wrench

123678346
09692050: RNCC: 3 | RNVC: 2
08.06510-9020: RNCC: 5 | RNVC: 2
08065109020: RNCC: 5 | RNVC: 2

20 Oct 2005

5120-12-358-1813
Hand Hammer

123581813
925-5: RNCC: 3 | RNVC: 2
1660-40: RNCC: 3 | RNVC: 2

24 Sep 2002

5120-12-324-7178
Hand Rivet Set

123247178
3 00 9 500: RNCC: 3 | RNVC: 2
30 009 500: RNCC: 5 | RNVC: 9

19 Mar 1991

5120-12-137-8263

5120-12-374-6068
Socket Wrench

123746068
F30140143: RNCC: 3 | RNVC: 2

28 Feb 2008

5120-12-050-0671

5120-12-356-7137
Montierhuelse

123567137
427589005900: RNCC: 3 | RNVC: 2

26 Mar 2002

5120-12-316-2242
Spanner Wrench Handle

123162242
436737: RNCC: 3 | RNVC: 2
436737: RNCC: 5 | RNVC: 2
436737: RNCC: 5 | RNVC: 9

2 Jan 1989

5120-12-121-2835
Pipe Vise And Stand

121212835
634B102-2: RNCC: 3 | RNVC: 2
4965: RNCC: 5 | RNVC: 9
PI0NIER2: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-380-8934
Socket Wrench Socket

123808934
40DL-7: RNCC: 3 | RNVC: 2
01240007: RNCC: 5 | RNVC: 2

10 Dec 2009

5120-12-391-2812
Socket Wrench Handle Sliding T-Head

123912812
15070000-TCS: RNCC: 3 | RNVC: 2

1 Mar 2013

5120-12-126-1825

5120-12-120-0977
Saddler's Collar Awl

121200977
NO PRIMARY REF 12-120-0977: RNCC: 3 | RNVC: 2
TK154-74: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-126-4669
Electronic Equipment Alignment Tool

121264669
NO PRIMARY REF 12-126-4669: RNCC: 3 | RNVC: 2
108679: RNCC: 5 | RNVC: 9
5502: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-325-8933
Socket Wrench Set

123258933
6-330: RNCC: 3 | RNVC: 2
20EMU3: RNCC: 3 | RNVC: 2
21150101: RNCC: 3 | RNVC: 2
2115 00 01: RNCC: 5 | RNVC: 2
21150001/2060: RNCC: 5 | RNVC: 2

19 Jul 1991

5120-12-126-1690
Mechanical Puller

121261690
55060010: RNCC: 3 | RNVC: 2
5738GRI: RNCC: 5 | RNVC: 2
8170H1: RNCC: 5 | RNVC: 2
55060-1: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-163-8323
Box Wrench

121638323
DIN248-19: RNCC: 2 | RNVC: 2
19DIN248: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-121-4806
Socket Wrench

121214806
DIN896-A19X22: RNCC: 2 | RNVC: 2
626-19X22: RNCC: 3 | RNVC: 2
A19X22DIN896: RNCC: 5 | RNVC: 2
A19X22DIN896GALNI8: RNCC: 5 | RNVC: 9
26-19X32: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-155-9507
Socket Wrench Socket

121559507
NM291-05: RNCC: 3 | RNVC: 2
NM291-05: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-195-9260
Open End Wrench

121959260
08.06003-9000: RNCC: 3 | RNVC: 2
4312 712 21190: RNCC: 3 | RNVC: 2
4900228-200000.01: RNCC: 5 | RNVC: 2

3 May 1983

5120-12-369-7594
Socket Wrench Socket

123697594
422589020900: RNCC: 3 | RNVC: 2
7083646: RNCC: 5 | RNVC: 2

15 Aug 2006

5120-12-364-6815
Socket Wrench Socket

123646815
02020019-TCS: RNCC: 3 | RNVC: 2

20 Oct 2004

5120-12-364-5635
Combination Box And Open End Wrench

123645635
40082424-TCS: RNCC: 3 | RNVC: 2

9 Oct 2004

5120-12-126-1956
Hand Rivet Set

121261956
NO PRIMARY REF 12-126-1956: RNCC: 3 | RNVC: 2
244E8: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-390-2606
Mounting Sleeve

123902606
80996060659: RNCC: 3 | RNVC: 2
80.99606-0659: RNCC: 5 | RNVC: 2

23 Oct 2012

5120-12-181-5099
Montagevorrichtung

121815099
142560: RNCC: 3 | RNVC: 2
89231038: RNCC: 5 | RNVC: 2
89415112: RNCC: 5 | RNVC: 2
698-767-0010: RNCC: 5 | RNVC: 2
142530: RNCC: 5 | RNVC: 9

26 Nov 1979

5120-12-150-6087
Socket Wrench Crowfoot Attachment

121506087
803-60217: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-129-1375
Combination Box And Open End Wrench

121291375
23110-99-0761: RNCC: 2 | RNVC: 2
FHOM10: RNCC: 3 | RNVC: 2
JD5120-12-129-1375: RNCC: 3 | RNVC: 2
3-1-10: RNCC: 3 | RNVC: 2
23110-99-0761: RNCC: 5 | RNVC: 9
23110-99-0761: RNCC: 5 | RNVC: 9
23110-99-0761: RNCC: 5 | RNVC: 9
301-10: RNCC: 5 | RNVC: 9
301MM10: RNCC: 5 | RNVC: 9
1-3SW10: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-314-1589
Hand Beading Tool

123141589
NV1-030749: RNCC: 3 | RNVC: 2

14 Jun 1988

5120-12-187-5296
Socket Wrench

121875296
NO PRIMARY REF 12-187-5296: RNCC: 3 | RNVC: 2
33B-N14: RNCC: 5 | RNVC: 9
33B14: RNCC: 5 | RNVC: 9
33B-N14: RNCC: 5 | RNVC: 9

13 Apr 1981

5120-12-381-7807
Socket Wrench Set

123817807
WZ-630010: RNCC: 3 | RNVC: 2

30 Mar 2010

5120-12-382-1992
Retaining Ring Pliers

123821992
EJ 4270: RNCC: 3 | RNVC: 2
01.57.89.75: RNCC: 5 | RNVC: 2

20 May 2010

5120-12-366-9070
Auswechs Klemmteil

123669070
0986611358: RNCC: 3 | RNVC: 2

21 Jun 2005

5120-12-308-6720
Socket Wrench Set

123086720
NO PRIMARY REF 12-308-6720: RNCC: 3 | RNVC: 2
40/45/35/8: RNCC: 5 | RNVC: 9
96010117: RNCC: 5 | RNVC: 9

6 Nov 1986

5120-12-305-4813
Box Wrench

123054813
640-50UND640-4655: RNCC: 3 | RNVC: 2
440R50: RNCC: 3 | RNVC: 2
2AK50: RNCC: 3 | RNVC: 2
08871: RNCC: 5 | RNVC: 2
440RC50: RNCC: 5 | RNVC: 2
5-50 UND 5-1-2GR3: RNCC: 5 | RNVC: 9
5-50-920: RNCC: 5 | RNVC: 9
5-50AND5 1/2-3: RNCC: 5 | RNVC: 9
1307110008AND1307960003: RNCC: 5 | RNVC: 9
640-50AND640-4655: RNCC: 5 | RNVC: 9

12 Nov 1985

5120-12-370-3930
Hand Hammer

123703930
396: RNCC: 3 | RNVC: 2

2 Nov 2006

5120-12-130-9503
Socket Head Screw Key

121309503
DIN6911-10: RNCC: 2 | RNVC: 2
WA61: RNCC: 3 | RNVC: 2
CS10: RNCC: 3 | RNVC: 2
1997MF10: RNCC: 3 | RNVC: 2
134423: RNCC: 5 | RNVC: 2
10DIN6911: RNCC: 5 | RNVC: 2
43506: RNCC: 5 | RNVC: 9
2094-10: RNCC: 5 | RNVC: 9
57418: RNCC: 5 | RNVC: 9
10DIN6911GALNI8: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-330-4086
Spanner Wrench

123304086
26-21C1475G001P5: RNCC: 3 | RNVC: 2

11 Dec 1992

5120-12-384-1260
Pliers

123841260
1272-160: RNCC: 3 | RNVC: 2

25 Jan 2011

5120-12-123-5862

5120-12-334-9945
Bearing And Bushing Inserter

123349945
F30274304: RNCC: 3 | RNVC: 2

8 Jul 1994

5120-12-181-6939
Torque Wrench Adapter

121816939
21-3-24: RNCC: 3 | RNVC: 2

10 Dec 1979

5120-12-319-5742
Socket Wrench Handle

123195742
60640001: RNCC: 3 | RNVC: 2

13 Oct 1989

5120-12-305-4456
H Nagel Auszieher

5120-12-196-2338
Bearing And Bushing Inserter

121962338
EV4-857: RNCC: 3 | RNVC: 2
EV4-857: RNCC: 5 | RNVC: 9

15 Jun 1983

5120-12-314-2320
Boerdelwer Einsatz

123142320
4597-51-6: RNCC: 3 | RNVC: 2
1651/6: RNCC: 3 | RNVC: 2

17 Jun 1988

5120-12-147-6425
Screw Thread Insert Inserter

121476425
01500177700: RNCC: 3 | RNVC: 2
01562777000: RNCC: 5 | RNVC: 9
535-6: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-134-2687
A Druckvorrichtung

121342687
057M01600: RNCC: 3 | RNVC: 2
VM73652: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-362-4811
Cross Tip Screwdriver

123624811
54.0084.960.37: RNCC: 3 | RNVC: 2
8078VDE-3: RNCC: 5 | RNVC: 2

2 Mar 2004

5120-12-171-3427
Blacksmiths' Tongs

121713427
623B101-400: RNCC: 3 | RNVC: 2
5029-400: RNCC: 5 | RNVC: 9
57105040: RNCC: 5 | RNVC: 9
57105-400: RNCC: 5 | RNVC: 9
2305-400: RNCC: 5 | RNVC: 9
6492-400: RNCC: 5 | RNVC: 9
6238101-400: RNCC: 5 | RNVC: 9

30 Sep 1977

5120-12-391-1295
Carpenters' Pincers

123911295
BZ 158: RNCC: 3 | RNVC: 2

18 Feb 2013

5120-12-091-4770

5120-12-394-5323
Pressure Relief Too

123945323
152971: RNCC: 3 | RNVC: 2

10 Dec 2013

5120-12-307-1264
Box Wrench

123071264
NO PRIMARY REF 12-307-1264: RNCC: 3 | RNVC: 2
2S-Z-1/4-5/16: RNCC: 5 | RNVC: 9
2S-Z1/4X5/16: RNCC: 5 | RNVC: 9
1408120001: RNCC: 5 | RNVC: 9
625A-1/4X5/16: RNCC: 5 | RNVC: 9
625A1/4X5/16: RNCC: 5 | RNVC: 9

13 May 1986

5120-12-177-2193
Box Wrench

121772193
DIN7444-110: RNCC: 2 | RNVC: 2
2400-110: RNCC: 3 | RNVC: 2
096105: RNCC: 3 | RNVC: 2
306-110: RNCC: 3 | RNVC: 2
8-110: RNCC: 3 | RNVC: 2
96-110: RNCC: 5 | RNVC: 2
110DIN7444: RNCC: 5 | RNVC: 2
42010110: RNCC: 5 | RNVC: 2

19 Jan 1979

5120-12-390-4412
Hand Hammer

123904412
FG 0323: RNCC: 3 | RNVC: 2
H-323: RNCC: 5 | RNVC: 2

13 Nov 2012

5120-12-368-9547
Mitnehmersch Stift

123689547
52639: RNCC: 3 | RNVC: 2

9 May 2006

5120-12-312-6657
Spanner Wrench

123126657
6600133-210240.03.0: RNCC: 2 | RNVC: 2
1274-ZG-24420-1160.06: RNCC: 3 | RNVC: 2
6600133-210240.03.0: RNCC: 3 | RNVC: 2
SW24420-4: RNCC: 5 | RNVC: 2

25 Jan 1988

5120-12-337-7620
Kraftvervi Stuetze

123377620
01.015.2.002.01: RNCC: 3 | RNVC: 2
B01-015-2-00201: RNCC: 5 | RNVC: 2

6 Apr 1995

5120-12-123-5310
Box Wrench

121235310
2-1 13-16X2: RNCC: 3 | RNVC: 2
2-439: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-309-8161
Spanner Wrench

123098161
001-218.012-000W2: RNCC: 2 | RNVC: 2
001-218.012-000W2: RNCC: 3 | RNVC: 2

6 Mar 1987

5120-12-145-8049
Ein- Und Ausziehvor

121458049
837589123300: RNCC: 3 | RNVC: 2
8375891233/00: RNCC: 5 | RNVC: 2
8375891233/00: RNCC: 5 | RNVC: 2
8375891233: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-171-3143
Buchse

121713143
VG95211-ML-121713143: RNCC: 2 | RNVC: 2
105-31702W14.02: RNCC: 3 | RNVC: 2
105-31702W14-02: RNCC: 5 | RNVC: 2

29 Sep 1977

5120-12-307-2648
Schluessel

123072648
10420: RNCC: 3 | RNVC: 2
WS301: RNCC: 5 | RNVC: 2

28 May 1986

5120-12-121-5953

5120-12-142-0267
Abzieher Haken

121420267
554: RNCC: 3 | RNVC: 2
TS5120-0657-554: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-305-6590
Socket Head Screw Key

123056590
272.308.508: RNCC: 3 | RNVC: 2
272.308.508 EZ: RNCC: 3 | RNVC: 2
2300232-991000.031.0: RNCC: 3 | RNVC: 2

2 Dec 1985

5120-12-377-8628
Torque Wrench

123778628
721NF/80: RNCC: 3 | RNVC: 2
50200081: RNCC: 5 | RNVC: 2

17 Feb 2009

5120-12-166-2273
Schluessel

121662273
1687951011: RNCC: 3 | RNVC: 2
KDEP2885: RNCC: 5 | RNVC: 9

13 Aug 1976

5120-12-190-8511
Ausbau- Ziehgriff

121908511
3812522049: RNCC: 3 | RNVC: 2
38125 22049: RNCC: 5 | RNVC: 9

17 Dec 1981

5120-12-368-9080
Socket Wrench Socket

123689080
02410034-TCS: RNCC: 3 | RNVC: 2

5 May 2006

5120-12-392-7416
Open End Box Wrench

123927416
SEWZG019: RNCC: 3 | RNVC: 2

3 Jul 2013

5120-12-311-6236
Rotating Members Aligning Tool

123116236
01TC33312: RNCC: 3 | RNVC: 2

29 Sep 1987

5120-12-305-1345
Driftpin

123051345
01TC34593: RNCC: 3 | RNVC: 2

1 Oct 1985

5120-12-023-1427

5120-12-309-7254
Hand Tube Flaring Punch

123097254
F600000092826: RNCC: 3 | RNVC: 2

19 Feb 1987

5120-12-120-9232
Socket Wrench Socket

121209232
20L-7/16: RNCC: 3 | RNVC: 2
108885: RNCC: 5 | RNVC: 9
6800Z7-16: RNCC: 5 | RNVC: 9
01420028: RNCC: 5 | RNVC: 9
40AL7-16: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-150-6251
Mechanical Puller Step Plate

121506251
23176-264590-00-0: RNCC: 2 | RNVC: 2
23176-264590.00.0: RNCC: 2 | RNVC: 2
23176-264590-00-0: RNCC: 5 | RNVC: 2
23176-264590.00.0: RNCC: 5 | RNVC: 2
23176-264590-00-0: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-381-6452
Combination Box And Open End Wrench

123816452
202A-5/16: RNCC: 3 | RNVC: 2

11 Mar 2010

5120-12-364-2386
Bearing And Bushing Inserter

123642386
387589091500: RNCC: 3 | RNVC: 2

3 Sep 2004

5120-12-383-7619
Cross Tip Screwdriver

123837619
46311001: RNCC: 3 | RNVC: 2
4018754184903: RNCC: 5 | RNVC: 2

6 Dec 2010

5120-12-362-3162
Torque Wrench Adapter

123623162
2446-STT 130: RNCC: 3 | RNVC: 2
2446-STT 130: RNCC: 5 | RNVC: 2

5 Feb 2004

5120-12-121-6474

5120-12-150-1545
Montierstift

121501545
100033-300-14: RNCC: 2 | RNVC: 2
100033-300-14: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-169-6737
Abziehvorrichtung

121696737
231-940: RNCC: 3 | RNVC: 2
1001-8100-0037: RNCC: 5 | RNVC: 2

3 Jun 1977

5120-12-195-6207
Adjustable Wrench

121956207
90525-00: RNCC: 2 | RNVC: 2
90525-00: RNCC: 5 | RNVC: 9

21 Mar 1983

5120-12-391-8564
Pipe Mounting Tool

123918564
RTMT0-02-08: RNCC: 3 | RNVC: 2

12 Apr 2013

5120-12-196-3836
Magnetic Retrieving Tool

121963836
360/3: RNCC: 3 | RNVC: 2
51156040: RNCC: 3 | RNVC: 2

4 Jul 1983

5120-12-305-6423
Swivel Knob Jeweler's Screwdriver Set

123056423
06L380: RNCC: 3 | RNVC: 2
2003F/7: RNCC: 3 | RNVC: 9
2003F/7: RNCC: 5 | RNVC: 2
161993: RNCC: 5 | RNVC: 2
2003F7: RNCC: 5 | RNVC: 2
2003F7: RNCC: 5 | RNVC: 2

28 Nov 1985

5120-12-388-8096
Repl Clamp Section

123888096
030.269: RNCC: 3 | RNVC: 2
030.269: RNCC: 5 | RNVC: 2

25 Apr 2012

5120-12-186-7324
Gewindeeinsatz

121867324
99346234: RNCC: 3 | RNVC: 2
420071: RNCC: 5 | RNVC: 9
420071: RNCC: 5 | RNVC: 9

2 Feb 1981

5120-12-322-4426
Spanner Wrench

123224426
12791-120000.000: RNCC: 2 | RNVC: 2
009-039.120-000W27: RNCC: 3 | RNVC: 2
12791-120000.000: RNCC: 5 | RNVC: 2

22 Aug 1990

5120-12-132-1660
Socket Wrench

121321660
25-30: RNCC: 3 | RNVC: 2
75-30: RNCC: 5 | RNVC: 9
211613: RNCC: 5 | RNVC: 9
1834814: RNCC: 5 | RNVC: 9
25-30: RNCC: 5 | RNVC: 9
25-30: RNCC: 5 | RNVC: 9
28M-30: RNCC: 5 | RNVC: 9
91A-30-CR: RNCC: 5 | RNVC: 9
075105: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-345-5141
Inserted Hammer Face

123455141
2502: RNCC: 3 | RNVC: 2
10956R-27: RNCC: 3 | RNVC: 2
00.74.11.29: RNCC: 5 | RNVC: 2
79 05 00 27: RNCC: 5 | RNVC: 2

26 Mar 1998

5120-12-344-8271
Schluessel

123448271
588.00-009000-111: RNCC: 3 | RNVC: 2

15 Dec 1997

5120-12-351-9575
Socket Head Screw Key

123519575
ISO2936-17: RNCC: 2 | RNVC: 2
201-017: RNCC: 3 | RNVC: 2

20 Sep 2000

5120-12-126-1337

5120-12-180-9310
Zwischenstueck

121809310
VG95211-ML-121809310: RNCC: 2 | RNVC: 2
AFG012767: RNCC: 3 | RNVC: 2
AFG17-01-09-00-05: RNCC: 5 | RNVC: 2
AFG1701090005: RNCC: 5 | RNVC: 2

11 Oct 1979

5120-12-123-5344

5120-12-123-5572

5120-12-344-1283
Pruef Gelenkstueck

123441283
13501: RNCC: 3 | RNVC: 2
NSK-AN06: RNCC: 5 | RNVC: 9

16 Sep 1997

5120-12-153-3552
Socket Wrench

121533552
D0SE500-6: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-301-0308
Bedienteil Hebel

123010308
1423-200.96(3): RNCC: 3 | RNVC: 2

19 Sep 1984

5120-12-355-4996
Ge Montierwerkzeug

123554996
5558878: RNCC: 3 | RNVC: 2

20 Nov 2001

5120-12-165-0252
Flat Tip Screwdriver

121650252
8000-9X250: RNCC: 3 | RNVC: 9
3696-10X250: RNCC: 5 | RNVC: 9
8000-10X250: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-171-2457
Gewindestueck

121712457
1X56131398: RNCC: 3 | RNVC: 2

21 Sep 1977

5120-12-129-8797

5120-12-350-4810
Montierhuelse

123504810
26-21C1359G002P18: RNCC: 3 | RNVC: 2

5 Apr 2000

5120-12-186-1737
Spanner Wrench

121861737
4900196-00000-02-0: RNCC: 3 | RNVC: 2

5 Dec 1980

5120-12-146-3721
Aufdrueckvorrichtun

121463721
1X56045794: RNCC: 3 | RNVC: 2
83091446002: RNCC: 5 | RNVC: 2
83.09144-6002: RNCC: 5 | RNVC: 2
W45794: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-320-0856
Hand Yoke Riveter

123200856
503: RNCC: 3 | RNVC: 2

6 Dec 1989

5120-12-307-1314
Mechanic's Bench Block

123071314
FM7024: RNCC: 3 | RNVC: 2

14 May 1986

5120-12-127-6725
Hamm Schlageinsatz

121276725
700730045: RNCC: 3 | RNVC: 2
700730045: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-134-2656
Socket Wrench

121342656
023M07300: RNCC: 3 | RNVC: 2
VM62445: RNCC: 5 | RNVC: 2
VM62445: RNCC: 5 | RNVC: 2
VM62445: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-377-7675
Mechanical Puller

123777675
F6378994: RNCC: 3 | RNVC: 2

10 Feb 2009

5120-12-146-1132
Craftsman's Tweezers

121461132
TL5120-0109-F010: RNCC: 2 | RNVC: 2
9157-155-I: RNCC: 3 | RNVC: 2
5516I: RNCC: 3 | RNVC: 2
C 5739 998: RNCC: 5 | RNVC: 2
53022510: RNCC: 5 | RNVC: 2
108702: RNCC: 5 | RNVC: 2
6556270: RNCC: 5 | RNVC: 2
0005384630: RNCC: 5 | RNVC: 2
C 5739 998: RNCC: 5 | RNVC: 2
TA528: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-171-0051
Screwdriver Bit Set And Handle

121710051
NO PRIMARY REF 12-171-0051: RNCC: 3 | RNVC: 2
51-6800-111-01: RNCC: 5 | RNVC: 2
159-1: RNCC: 5 | RNVC: 9

1 Sep 1977

5120-12-170-6929
Spanner Wrench

121706929
1213-100-6-1: RNCC: 3 | RNVC: 2
1213-100-6-1: RNCC: 5 | RNVC: 9

28 Jul 1977

5120-12-126-2967
Open End Wrench

121262967
6X6-5-714: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-367-5894
Socket Head Screw Key

123675894
10031: RNCC: 3 | RNVC: 2

7 Sep 2005

5120-12-379-8596
Cable Type Ratchet Lever Puller

123798596
T508D: RNCC: 3 | RNVC: 2
508: RNCC: 5 | RNVC: 2

8 Sep 2009

5120-12-340-2200
Seal Inserter And Remover

123402200
2300232-992000.003.0: RNCC: 2 | RNVC: 2
2300232-992000.003.0: RNCC: 3 | RNVC: 2

15 Mar 1996

5120-12-365-9147
Socket Head Screw Key

123659147
T4834 3: RNCC: 3 | RNVC: 2

17 Feb 2005

5120-12-173-5143
Spanner Wrench

121735143
009-017-450-007W2: RNCC: 3 | RNVC: 2

19 Apr 1978

5120-12-194-7958
Socket Wrench Socket

121947958
5805890209/00: RNCC: 3 | RNVC: 2
580589020900: RNCC: 5 | RNVC: 2

8 Dec 1982

5120-12-359-9856
Flat Tip Screwdriver

123599856
BE-8160: RNCC: 3 | RNVC: 2
0010745: RNCC: 5 | RNVC: 2
7314150010745: RNCC: 5 | RNVC: 9

26 Mar 2003

5120-12-120-5575
Socket Wrench

121205575
DIN3112-32: RNCC: 2 | RNVC: 2
35B32: RNCC: 3 | RNVC: 2
S754000100: RNCC: 3 | RNVC: 2
198-711-0911: RNCC: 5 | RNVC: 2
32DIN3112: RNCC: 5 | RNVC: 2
3112-32: RNCC: 5 | RNVC: 9
3112-32: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-305-3092
Box Wrench

123053092
2B12X13: RNCC: 3 | RNVC: 2
6051580: RNCC: 5 | RNVC: 2
3S-M12X13: RNCC: 5 | RNVC: 9
18-12X13: RNCC: 5 | RNVC: 9

21 Oct 1985

5120-12-394-1397
Centering Ring

123941397
310877: RNCC: 3 | RNVC: 2
5184-02-00-22#35: RNCC: 5 | RNVC: 2

7 Nov 2013

5120-12-375-8631
Socket Wrench Handle

123758631
435SG-QR: RNCC: 3 | RNVC: 2
435SGS: RNCC: 5 | RNVC: 2
12110030: RNCC: 5 | RNVC: 2

14 Jul 2008

5120-12-182-2095
Socket Wrench Crowfoot Attachment

121822095
540-15: RNCC: 3 | RNVC: 2

21 Jan 1980

5120-12-123-4838
Open End Wrench

121234838
DIN133-55: RNCC: 2 | RNVC: 2
2300-55: RNCC: 3 | RNVC: 2
133-55: RNCC: 3 | RNVC: 2
452-55: RNCC: 3 | RNVC: 2
55DIN133: RNCC: 5 | RNVC: 2
571A301-55: RNCC: 5 | RNVC: 9
1102110008: RNCC: 5 | RNVC: 9
50550: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-155-9408
Slip Joint Pliers

121559408
NM279-02: RNCC: 3 | RNVC: 2
25035216: RNCC: 5 | RNVC: 2
NM279-02: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-123-5806
Socket Wrench Socket

121235806
5015 1 5/8: RNCC: 3 | RNVC: 2
D21-1 5-8: RNCC: 3 | RNVC: 2
110715: RNCC: 5 | RNVC: 9
60A1 5-8: RNCC: 5 | RNVC: 9
9500DZ1 5-8: RNCC: 5 | RNVC: 9
06410066: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-316-3060
Socket Head Screw Key

123163060
42901115: RNCC: 3 | RNVC: 2
LN-1,5MMBP: RNCC: 5 | RNVC: 2

9 Jan 1989

5120-12-392-9361
Socket Head Screw Key

123929361
10759A-2-5/64: RNCC: 3 | RNVC: 2
4018754085118: RNCC: 5 | RNVC: 2
43564005: RNCC: 5 | RNVC: 2

24 Jul 2013

5120-12-135-5969
Mechanical Puller

121355969
4518-5: RNCC: 3 | RNVC: 2
781-5: RNCC: 3 | RNVC: 2
150-5: RNCC: 3 | RNVC: 2
175-2: RNCC: 3 | RNVC: 2
4938520011: RNCC: 5 | RNVC: 2
52182: RNCC: 5 | RNVC: 2
171689: RNCC: 5 | RNVC: 2
08461: RNCC: 5 | RNVC: 2
781-5M: RNCC: 5 | RNVC: 9
108119: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-304-6224
Drill Guide

123046224
23305-264500-01-0: RNCC: 2 | RNVC: 2
23305 264500 01 0: RNCC: 3 | RNVC: 2

6 Aug 1985

5120-12-330-3649
Lager- Und B Griff

123303649
2653-990980.02: RNCC: 2 | RNVC: 2
2653-990980.02: RNCC: 3 | RNVC: 2

8 Dec 1992

5120-12-321-9861
Mechanical Puller Forcing Screw

123219861
790520377: RNCC: 3 | RNVC: 2
3201-750.07.00.074-000: RNCC: 5 | RNVC: 2

16 Jul 1990

5120-12-139-2470
Ab Anschluszstueck

121392470
074M00401: RNCC: 3 | RNVC: 2
VQ69858-1: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-332-7008
Socket Wrench

123327008
038.001.0: RNCC: 3 | RNVC: 2
038 001 0-4: RNCC: 5 | RNVC: 2
038.001.0-4: RNCC: 5 | RNVC: 2
790514477: RNCC: 5 | RNVC: 2

8 Sep 1993

5120-12-321-7862
Bearing And Bushing Inserter

123217862
41810-T601: RNCC: 3 | RNVC: 2

26 Jun 1990

5120-12-363-9050
Bearing And Bushing Inserter

123639050
T670P5001262: RNCC: 3 | RNVC: 2

4 Aug 2004

5120-12-310-4351
Ge Montierwerkzeug

123104351
4986015: RNCC: 3 | RNVC: 2

21 May 1987

5120-12-371-7587
Crowbar

123717587
3877: RNCC: 3 | RNVC: 2

11 May 2007

5120-12-146-6808
Lagerin Abdruecker

121466808
4015890135: RNCC: 3 | RNVC: 2
401589013500: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-139-3022

5120-12-140-8982

5120-12-139-3053

5120-12-151-6505
Sc Ring Druckbock

121516505
23111-7154.00: RNCC: 2 | RNVC: 2
23111-7154.00: RNCC: 3 | RNVC: 2
23111-7154-00: RNCC: 5 | RNVC: 9
23111-7154.00: RNCC: 5 | RNVC: 9
23111-7154-00: RNCC: 5 | RNVC: 9
23111-7154-00: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-383-4004
Seal Inserter

123834004
58512-0015: RNCC: 3 | RNVC: 2

15 Oct 2010

5120-12-389-4277
Torque Screwdriver

123894277
659949-300: RNCC: 3 | RNVC: 2

4 Jul 2012

5120-12-182-4458
Auszieher

121824458
621.071-0: RNCC: 3 | RNVC: 2
596005: RNCC: 5 | RNVC: 9
621071: RNCC: 5 | RNVC: 9

1 Feb 1980

5120-12-325-9836
Torque Wrench Adapter

123259836
TL5120-0086-400: RNCC: 2 | RNVC: 2
TA490: RNCC: 5 | RNVC: 2
7118-1: RNCC: 5 | RNVC: 9
1547453: RNCC: 5 | RNVC: 9

26 Jul 1991

5120-12-176-7722
Saddler's Pegging Awl Blade

121767722
6890-1-150: RNCC: 3 | RNVC: 9

18 Dec 1978

5120-12-153-9219
Hand Hammer

121539219
1613: RNCC: 3 | RNVC: 2
179: RNCC: 3 | RNVC: 2
2510501: RNCC: 3 | RNVC: 2
271: RNCC: 3 | RNVC: 2
251/5-ES: RNCC: 5 | RNVC: 2
4016671009583: RNCC: 5 | RNVC: 2
5180-0162FIG1-6: RNCC: 5 | RNVC: 9
5180-162FIG1-6: RNCC: 5 | RNVC: 9
TL5180-0162-060: RNCC: 5 | RNVC: 9
TL5180-0162FIG1-6: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-353-4708
Pliers

123534708
346456: RNCC: 3 | RNVC: 2
93083W2: RNCC: 5 | RNVC: 2
346456: RNCC: 5 | RNVC: 2

28 Mar 2001

5120-12-198-5575
Montierhuelse

121985575
393497: RNCC: 3 | RNVC: 2

9 Feb 1984

5120-12-363-8156
Bearing And Bushing Inserter

123638156
T670P5001201: RNCC: 3 | RNVC: 2

28 Jul 2004

5120-12-383-6872
Lining Bar

123836872
5600073: RNCC: 3 | RNVC: 2
UTP7: RNCC: 5 | RNVC: 2

25 Nov 2010

5120-12-152-4338
Gleiske Haltebuegel

121524338
7213130400: RNCC: 3 | RNVC: 2
510304: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-145-4257
Korneinstellvorrich

121454257
2D2001U1V29: RNCC: 2 | RNVC: 2
2D2001U1V29: RNCC: 3 | RNVC: 2
2D2001U1V29: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-153-9451
Schluessel

121539451
A14NAN2298: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-120-4581

5120-12-191-5203
Abdrueckvorrichtung

121915203
0180154S: RNCC: 3 | RNVC: 2
6008R-1800.00.0: RNCC: 5 | RNVC: 2
6008R-1800.00.0: RNCC: 5 | RNVC: 2
6008R-1800.00.0: RNCC: 5 | RNVC: 2
018 015 4S: RNCC: 5 | RNVC: 2
6008R-1800.00.0: RNCC: 5 | RNVC: 2

8 Feb 1982

5120-12-305-2553
Socket Head Screw Key

123052553
45005: RNCC: 3 | RNVC: 2
YAWH1904: RNCC: 3 | RNVC: 2
155-4-200: RNCC: 3 | RNVC: 2
334-4,0X200: RNCC: 3 | RNVC: 2
4010995009144: RNCC: 5 | RNVC: 2
009144: RNCC: 5 | RNVC: 2

15 Oct 1985

5120-12-040-0214

5120-12-313-1811
Socket Wrench Set

123131811
7980 N-Z: RNCC: 3 | RNVC: 2
109998: RNCC: 5 | RNVC: 2

9 Mar 1988

5120-12-123-5234
Box Wrench

121235234
DIN837-A21X23: RNCC: 2 | RNVC: 2
A21X23DIN837: RNCC: 5 | RNVC: 2
A21X23DIN837GALNI8: RNCC: 5 | RNVC: 9
22-21X23: RNCC: 5 | RNVC: 9
41062123: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-149-5827
Socket Wrench

121495827
NO PRIMARY REF 12-149-5827: RNCC: 3 | RNVC: 2
26R11-16X13-16WW: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-375-7317
Cross Tip Screwdriver

123757317
66380: RNCC: 3 | RNVC: 2
14-641VDE: RNCC: 3 | RNVC: 2
4001002663800: RNCC: 5 | RNVC: 2

30 Jun 2008

5120-12-156-1664
Hand Hammer

121561664
NM235-03: RNCC: 3 | RNVC: 2
NM235-03: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-339-9583
Mechanical Puller

123399583
5070311: RNCC: 3 | RNVC: 2
698-424-0000: RNCC: 5 | RNVC: 2

6 Feb 1996

5120-12-161-3335
Schluessel

121613335
VG95211-ML-121613335: RNCC: 2 | RNVC: 2
160-88604: RNCC: 3 | RNVC: 2
160-88604: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-124-8493
Duesen Gewindedorn

121248493
35-10-40: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-303-3136
Bearing And Bushing Inserter

123033136
10-020-005: RNCC: 3 | RNVC: 2
606589026100: RNCC: 5 | RNVC: 2

13 Mar 1985

5120-12-156-1483
Dorn

121561483
VG95211-ML-121561483: RNCC: 2 | RNVC: 2
160-88743-07: RNCC: 3 | RNVC: 2
160-88743-07: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-381-7905
Socket Wrench Set

123817905
096513023: RNCC: 3 | RNVC: 2
A0965 13 023: RNCC: 5 | RNVC: 2
391413324609: RNCC: 6 | RNVC: 9
49338: RNCC: 6 | RNVC: 9

31 Mar 2010

5120-12-169-4872
Spanner Wrench

121694872
IR915001: RNCC: 3 | RNVC: 2
IR915001ZG: RNCC: 5 | RNVC: 2

18 May 1977

5120-12-383-6127
Hand Beading Tool

123836127
105-31781 W6: RNCC: 3 | RNVC: 2

15 Nov 2010

5120-12-321-1084
Piston Inserter

123211084
550589036100: RNCC: 3 | RNVC: 2

28 Mar 1990

5120-12-311-2674
Aufdrueckwerkzeug

123112674
1X56137192: RNCC: 3 | RNVC: 2
620589004300: RNCC: 5 | RNVC: 2

11 Aug 1987

5120-12-133-3225
Crimping Tool Die

121333225
05110: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-133-3210
Crimping Tool Die

121333210
05120: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-021-2591

5120-12-021-2676

5120-12-156-1596
Box Wrench

121561596
NM288-01: RNCC: 3 | RNVC: 2
NM288-01: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-124-8504
Schluessel

121248504
35-10-13: RNCC: 3 | RNVC: 2
FW499F: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-121-5426
Blacksmith's Bottom Swage

121215426
0001900-25: RNCC: 3 | RNVC: 2
4016671002188: RNCC: 5 | RNVC: 2
5049-01-25: RNCC: 5 | RNVC: 9
5049.01-25: RNCC: 5 | RNVC: 9
19-25: RNCC: 5 | RNVC: 9
1900-25: RNCC: 5 | RNVC: 9
DIN5104-U25: RNCC: 5 | RNVC: 9
U25DIN5104: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-323-0746
Fuse Puller

123230746
NO PRIMARY REF 12-323-0746: RNCC: 3 | RNVC: 2
Q81X2201: RNCC: 5 | RNVC: 2
5120AA1080051: RNCC: 5 | RNVC: 9
Q81-X2201: RNCC: 5 | RNVC: 9

22 Oct 1990

5120-12-371-0799
Inspection Mirror

123710799
2-275: RNCC: 3 | RNVC: 2

6 Feb 2007

5120-12-375-8691
Socket Wrench Set

123758691
6-360: RNCC: 3 | RNVC: 2

15 Jul 2008

5120-12-380-3899
Socket Wrench Socket

123803899
402-8: RNCC: 3 | RNVC: 2
01140008: RNCC: 5 | RNVC: 2

26 Oct 2009

5120-12-388-3468
Torque Wrench Multiplier

123883468
MP300-800: RNCC: 3 | RNVC: 2
53030800: RNCC: 5 | RNVC: 2

13 Mar 2012

5120-12-387-0182
Electrical Contact Remover

123870182
1230-23601: RNCC: 3 | RNVC: 2
80.99606-6141: RNCC: 5 | RNVC: 2
80996066141: RNCC: 5 | RNVC: 2

26 Oct 2011

5120-12-126-1583
Pliers

121261583
DIN5257-A140GERAUHT: RNCC: 2 | RNVC: 2
9070-2C: RNCC: 3 | RNVC: 2
2684-140: RNCC: 5 | RNVC: 2
A140DIN5257GERAUHT: RNCC: 5 | RNVC: 2
0808393733539: RNCC: 5 | RNVC: 9
TGL 4312,140,OB 019: RNCC: 5 | RNVC: 9
A140DIN5257: RNCC: 5 | RNVC: 9
1342AS140: RNCC: 5 | RNVC: 9
13-140: RNCC: 5 | RNVC: 9
139325311184019: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-314-9263
Screw Thread Insert Inserter

123149263
6100080.00: RNCC: 3 | RNVC: 2
601080: RNCC: 5 | RNVC: 2

27 Aug 1988

5120-12-010-9657

5120-12-331-6977
Torque Wrench

123316977
4550-30: RNCC: 3 | RNVC: 2

8 Jun 1993

5120-12-151-6598
Reibunterlage

121516598
WKW9008-0408V85: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-172-2991
Multiposition Vise

121722991
TL5120-0123-A: RNCC: 2 | RNVC: 2
9-250: RNCC: 3 | RNVC: 2
9-250 SPANNFIX-VARIO: RNCC: 5 | RNVC: 2
VARIO9-250: RNCC: 5 | RNVC: 2
M756: RNCC: 5 | RNVC: 9
SPANNFIXVARI0-5TLG: RNCC: 5 | RNVC: 9
5120-90076: RNCC: 6 | RNVC: 9
5120-90076: RNCC: 6 | RNVC: 9

10 Jan 1978

5120-12-327-7176
Gewindeein Spindel

123277176
01500674620: RNCC: 3 | RNVC: 2
0150 674 620: RNCC: 5 | RNVC: 2
0150-0674-620: RNCC: 5 | RNVC: 2

24 Feb 1992

5120-12-376-3818
Blindni Mundstueck

123763818
M2875RT80-04-1AM: RNCC: 3 | RNVC: 2
2875RT TEIL M2875RT80-04-1AM: RNCC: 5 | RNVC: 2

22 Sep 2008

5120-12-323-8475
Sheet Metalworking Dolly Block

123238475
1628: RNCC: 3 | RNVC: 2

27 Dec 1990

5120-12-041-2666

5120-12-328-6643
Mechanical Puller Set

123286643
57430214: RNCC: 3 | RNVC: 9

12 Jun 1992

5120-12-139-3099

5120-12-124-8496
Tr Ausbau- Bolzen

121248496
35-10-09: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-350-2562
Bl Ausbeulwerkzeug

123502562
321/3: RNCC: 3 | RNVC: 2

8 Mar 2000

5120-12-176-7317
Druckstueck

121767317
VG95211-ML-121767317: RNCC: 2 | RNVC: 2
105-21832W1.07: RNCC: 3 | RNVC: 2
105-21832W1-07: RNCC: 5 | RNVC: 2

15 Dec 1978

5120-12-176-7335
Zwischenring

121767335
VG95211-ML-121767335: RNCC: 2 | RNVC: 2
105-42121W2.04: RNCC: 3 | RNVC: 2
105-42121W2-04: RNCC: 5 | RNVC: 2

15 Dec 1978

5120-12-358-2196
Flat Tip Screwdriver

123582196
BE-8250: RNCC: 3 | RNVC: 2
7314150047772: RNCC: 5 | RNVC: 2

27 Sep 2002

5120-12-313-4264
Zentrier- Ring

123134264
80996040074: RNCC: 3 | RNVC: 2
80.99604.0074: RNCC: 5 | RNVC: 2

30 Mar 1988

5120-12-347-2688
Caulking Gun Nozzle

123472688
117.55C: RNCC: 3 | RNVC: 2

18 Nov 1998

5120-12-173-8905
Ausbauvorrichtung

121738905
81668506019: RNCC: 3 | RNVC: 2
81.66850-6019: RNCC: 5 | RNVC: 2

22 May 1978

5120-12-301-2812
Rotating Members Aligning Tool

123012812
1X56136581: RNCC: 3 | RNVC: 2
81.66850-0022: RNCC: 5 | RNVC: 2
81668500022: RNCC: 5 | RNVC: 2
0535706: RNCC: 5 | RNVC: 2
535706: RNCC: 5 | RNVC: 9

3 Oct 1984

5120-12-332-7494
Spanner Wrench

123327494
009-506.220-000: RNCC: 2 | RNVC: 2
009-506.220-000: RNCC: 3 | RNVC: 2

14 Sep 1993

5120-12-165-5339
Flat Tip Screwdriver

121655339
NO PRIMARY REF 12-165-5339: RNCC: 3 | RNVC: 2
131562: RNCC: 5 | RNVC: 9
8000N-1-2-8-150: RNCC: 5 | RNVC: 9
8000N1-2X8X150: RNCC: 5 | RNVC: 9
3930140010: RNCC: 5 | RNVC: 9
829-5: RNCC: 5 | RNVC: 9

25 May 1976

5120-12-319-3755
Blindn Nietzugkopf

123193755
4C-615-64: RNCC: 3 | RNVC: 2
H615-4CTSK: RNCC: 5 | RNVC: 2

27 Sep 1989

5120-12-151-6614
Gehaeuse Keil

121516614
WKW9009-0102V3: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-365-6434
Bearing And Bushing Inserter

123656434
80996046012: RNCC: 3 | RNVC: 2
80.99604-6012: RNCC: 5 | RNVC: 2

20 Jan 2005

5120-12-331-8924
Swivel Knob Jeweler's Screwdriver

123318924
TL5120-0111-20: RNCC: 2 | RNVC: 2
010215: RNCC: 3 | RNVC: 9
2127-0: RNCC: 5 | RNVC: 9

1 Jul 1993

5120-12-122-8103
Tap And Reamer Wrench

121228103
DIN1814-7: RNCC: 2 | RNVC: 2
83116: RNCC: 3 | RNVC: 2
7500-7: RNCC: 3 | RNVC: 2
68-7: RNCC: 3 | RNVC: 2
TVA5120-2-263-012: RNCC: 5 | RNVC: 1
TVA5120-2-263-012-1.1.9: RNCC: 5 | RNVC: 2
1480-7: RNCC: 5 | RNVC: 9
16X32DIN1814: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-170-8722
Montagevorrichtung

121708722
735265-7-728-0027-750-43: RNCC: 3 | RNVC: 2
735265-7-728-0027-750-43: RNCC: 5 | RNVC: 9

17 Aug 1977

5120-12-332-1934
Mechanical Puller

123321934
52.3108.012.00: RNCC: 3 | RNVC: 2

23 Jul 1993

5120-12-140-3022

5120-12-328-8408
Inspection Mirror

123288408
467: RNCC: 3 | RNVC: 2

26 Jun 1992

5120-12-312-5167
Spanner Wrench

123125167
123 589 02 16 00: RNCC: 3 | RNVC: 2
123589021600: RNCC: 5 | RNVC: 2

14 Jan 1988

5120-12-126-4671
Electronic Equipment Alignment Tool

121264671
5504: RNCC: 3 | RNVC: 2
5M8938-220-36: RNCC: 5 | RNVC: 2
108681: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-176-7316
Bolzen

121767316
VG95211-ML-121767316: RNCC: 2 | RNVC: 2
105-21832W1.04: RNCC: 3 | RNVC: 2
105-21832W1-04: RNCC: 5 | RNVC: 2

15 Dec 1978

5120-12-339-9697
Eindrueckwerkzeug

123399697
5070837: RNCC: 3 | RNVC: 2
698-464-0010: RNCC: 5 | RNVC: 2

7 Feb 1996

5120-12-345-3355
Seal Inserter

123453355
7419-798-002: RNCC: 3 | RNVC: 2

3 Mar 1998

5120-12-362-7574
Dr Montierwerkzeug

123627574
2500261-993280.000.0: RNCC: 2 | RNVC: 2
2500261-993280.000.0: RNCC: 3 | RNVC: 2

27 Mar 2004

5120-12-191-1885
Glocke

121911885
1X56136965-1: RNCC: 3 | RNVC: 2

18 Jan 1982

5120-12-172-1841
Spanner Wrench

121721841
903-812-0080: RNCC: 3 | RNVC: 2

3 Jan 1978

5120-12-372-2220
Socket Wrench Socket

123722220
23-590-00-188: RNCC: 3 | RNVC: 2

28 Jun 2007

5120-12-193-5156
Socket Wrench

121935156
143A/01-10/9220-01 9220.0001: RNCC: 2 | RNVC: 2
143A/01-10/9220-01 9220.0001: RNCC: 3 | RNVC: 2
143A01-10-9220-01-9220-0001: RNCC: 3 | RNVC: 2

29 Jul 1982

5120-12-362-1138
Crimpzange Kopf

123621138
118502101: RNCC: 3 | RNVC: 2
CSV10-0099: RNCC: 5 | RNVC: 2
80996260099: RNCC: 5 | RNVC: 2
80996250049: RNCC: 5 | RNVC: 9

12 Jan 2004

5120-12-127-2758
Schraube

121272758
83.09144-0038: RNCC: 3 | RNVC: 2
83091440038: RNCC: 3 | RNVC: 2
WL19A1: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-152-7792
Schluessel

121527792
510070-20305: RNCC: 2 | RNVC: 2

30 May 1969

5120-12-157-6769
Kabelschuhh Matrize

121576769
B16WHK5: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-344-2764
Socket Wrench Socket

123442764
56320S0000: RNCC: 3 | RNVC: 2

10 Oct 1997

5120-12-094-0378

5120-12-341-6314
Drive Pin Punch

123416314
346041: RNCC: 3 | RNVC: 2
94200-110W11: RNCC: 5 | RNVC: 2

8 Oct 1996

5120-12-181-5075
Dorn

121815075
123310: RNCC: 3 | RNVC: 2
181203: RNCC: 5 | RNVC: 2
89231030: RNCC: 5 | RNVC: 2
698-718-0000: RNCC: 5 | RNVC: 2

26 Nov 1979

5120-12-179-9691
Montagevorrichtung

121799691
142470: RNCC: 3 | RNVC: 2
80.99606-0046: RNCC: 5 | RNVC: 2
80996060046: RNCC: 5 | RNVC: 2

14 Aug 1979

5120-12-185-6658
Schluessel

121856658
4900059-721190-000-0: RNCC: 3 | RNVC: 2
4900059-721190.000.0: RNCC: 3 | RNVC: 2
721190-000-0: RNCC: 5 | RNVC: 2

23 Oct 1980

5120-12-300-4801
Drive Pin Punch

123004801
NO PRIMARY REF 12-300-4801: RNCC: 3 | RNVC: 2
107564: RNCC: 5 | RNVC: 9
3659SP-3,4: RNCC: 5 | RNVC: 9

4 Aug 1984

5120-12-123-5441
Socket Wrench

121235441
NO PRIMARY REF 12-123-5441: RNCC: 3 | RNVC: 2
24-310: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-180-5458
Buegel

121805458
3907-38000-000: RNCC: 3 | RNVC: 2
83.09144-0031: RNCC: 5 | RNVC: 2
83091440031: RNCC: 5 | RNVC: 2

17 Sep 1979

5120-12-322-3215
Mechanical Puller

123223215
09.012.26.03.0: RNCC: 3 | RNVC: 2
09-012-26-03-0: RNCC: 5 | RNVC: 9

10 Aug 1990

5120-12-306-3752
Hand Rivet Set Assortment

123063752
744710-5: RNCC: 3 | RNVC: 2
74500-5: RNCC: 5 | RNVC: 9

25 Feb 1986

5120-12-384-9738
Socket Wrench Handle Sliding T-Head

123849738
918.3807: RNCC: 3 | RNVC: 2

14 Apr 2011

5120-12-323-9860
Socket Head Screw Key

123239860
NO PRIMARY REF 12-323-9860: RNCC: 3 | RNVC: 2
173266: RNCC: 5 | RNVC: 9
1996-048: RNCC: 5 | RNVC: 9

15 Jan 1991

5120-12-330-7358
Socket Wrench

123307358
336-13X230: RNCC: 3 | RNVC: 9
428-13: RNCC: 3 | RNVC: 9

2 Feb 1993

5120-12-309-8980
Mechanical Puller Adapter

123098980
507589002502: RNCC: 3 | RNVC: 2
507589002502: RNCC: 5 | RNVC: 2
507589002502: RNCC: 5 | RNVC: 2
5075890025/02: RNCC: 5 | RNVC: 2

16 Mar 1987

5120-12-382-4247
Bearing And Bushing Inserter

123824247
0986612137: RNCC: 3 | RNVC: 2

18 Jun 2010

5120-12-383-1715
Torque Wrench Adapter Set

123831715
T291P0005051: RNCC: 3 | RNVC: 2

22 Sep 2010

5120-12-368-2603
Pipe Wrench

123682603
76500001-TCS: RNCC: 3 | RNVC: 2

18 Jan 2006

5120-12-126-3097

5120-12-357-7533
Socket Wrench Extension

123577533
J0433557D311-000A1-010: RNCC: 3 | RNVC: 2

19 Jul 2002

5120-12-194-0843
Torque Wrench Adapter

121940843
TL5120-0086-790: RNCC: 2 | RNVC: 2
21/DCA-41: RNCC: 5 | RNVC: 9
6264110022: RNCC: 5 | RNVC: 9
6630D-41: RNCC: 5 | RNVC: 9
732/40 41: RNCC: 5 | RNVC: 9

29 Sep 1982

5120-12-362-0707
Spanner Wrench

123620707
335969-9005.000: RNCC: 3 | RNVC: 2
3359699005000: RNCC: 5 | RNVC: 2

6 Jan 2004

5120-12-326-0572
Screwdriver Bit

123260572
CH1612/9: RNCC: 3 | RNVC: 2
6.088.801.4010.9: RNCC: 3 | RNVC: 2
CH1612/9: RNCC: 5 | RNVC: 9
6-088-8-014-010-9: RNCC: 5 | RNVC: 9

2 Aug 1991

5120-12-340-4273
Rotating Members Aligning Tool

123404273
AP7 044: RNCC: 3 | RNVC: 2

12 Apr 1996

5120-12-186-7308
Buegel

121867308
99395004: RNCC: 3 | RNVC: 2
416170: RNCC: 5 | RNVC: 9
416170: RNCC: 5 | RNVC: 9

2 Feb 1981

5120-12-179-3185

5120-12-133-3982
Screwdriver Bit

121333982
55Z3-8: RNCC: 3 | RNVC: 2
109083: RNCC: 5 | RNVC: 2
6990Z3-8: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-308-7957
Mechanical Puller

123087957
2996.66.80: RNCC: 3 | RNVC: 2

18 Nov 1986

5120-12-041-5611

5120-12-163-8900
Spanner Wrench

121638900
VG95211-ML-121638900: RNCC: 2 | RNVC: 2
1X56 136 233: RNCC: 3 | RNVC: 2
1X56136233: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-363-9841
Bearing And Bushing Inserter

123639841
T671P5002254: RNCC: 3 | RNVC: 2

10 Aug 2004

5120-12-021-3522

5120-12-365-9661
Socket Head Screw Key Set

123659661
977/6: RNCC: 3 | RNVC: 2
024410: RNCC: 5 | RNVC: 2

22 Feb 2005

5120-12-337-1931
Valve Spring Compressor

123371931
11.49025-0116: RNCC: 3 | RNVC: 2
114.019: RNCC: 5 | RNVC: 2
11.49025-0116: RNCC: 5 | RNVC: 9
114.019: RNCC: 5 | RNVC: 9

31 Jan 1995

5120-12-394-2365
Torque Wrench

123942365
657270-100: RNCC: 3 | RNVC: 2

13 Nov 2013

5120-12-183-0991
Dorn

121830991
4190430: RNCC: 3 | RNVC: 2

20 Mar 1980

5120-12-153-7940
Schluesseleinsatz

121537940
CH1775-6: RNCC: 3 | RNVC: 2
839589320700: RNCC: 5 | RNVC: 2
CH1775-6: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-382-3337
Pliers

123823337
97.0094.5325: RNCC: 3 | RNVC: 2

8 Jun 2010

5120-12-023-2531

5120-12-369-7600
Socket Wrench

123697600
623500-M12: RNCC: 3 | RNVC: 2
7075965: RNCC: 5 | RNVC: 2

15 Aug 2006

5120-12-135-8736
Stell Stift

121358736
35-10-44: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-168-6339
Spanner Wrench

121686339
7023138025902: RNCC: 3 | RNVC: 2
702313-8025.902: RNCC: 5 | RNVC: 2

25 Mar 1977

5120-12-190-2046
Mechanical Puller

121902046
NO PRIMARY REF 12-190-2046: RNCC: 3 | RNVC: 2
416260: RNCC: 5 | RNVC: 2
416260: RNCC: 5 | RNVC: 9

11 Nov 1981

5120-12-182-5435
Montagewerkzeug

121825435
105-45051W7: RNCC: 3 | RNVC: 2

8 Feb 1980

5120-12-126-2205

5120-12-010-9639

5120-12-163-6082
Abziehvorrichtung

121636082
VG95211-ML-121636082: RNCC: 2 | RNVC: 2
105-14181W4: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-340-6404
Spanner Wrench

123406404
80996226002: RNCC: 3 | RNVC: 2
80.99622.6002: RNCC: 5 | RNVC: 2
80.99622-6002: RNCC: 5 | RNVC: 2

15 May 1996

5120-12-126-1388
Gasoline Blowtorch

121261388
NO PRIMARY REF 12-126-1388: RNCC: 3 | RNVC: 2
SA2-34DIN8502MS: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-172-0098
Open End Wrench

121720098
NO PRIMARY REF 12-172-0098: RNCC: 3 | RNVC: 2
104881: RNCC: 5 | RNVC: 9
1930M14X15: RNCC: 5 | RNVC: 9

8 Dec 1977

5120-12-356-0807
Socket Wrench Screwdriver Attachment

123560807
8-7300.03: RNCC: 2 | RNVC: 2
8-7300.03: RNCC: 3 | RNVC: 2
9861571: RNCC: 5 | RNVC: 2

21 Jan 2002

5120-12-380-6255
Box Wrench

123806255
0112121231000: RNCC: 3 | RNVC: 2
112A-7/16X1/2: RNCC: 5 | RNVC: 2

13 Nov 2009

5120-12-196-6259
Adjustable Wrench

121966259
592-8: RNCC: 3 | RNVC: 2
225-8: RNCC: 5 | RNVC: 9
225-8: RNCC: 5 | RNVC: 9

25 Jul 1983

5120-12-158-9738
Electronic Equipment Alignment Tool

121589738
700-7D: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-368-8453
Socket Wrench Set

123688453
770-LAU: RNCC: 3 | RNVC: 2
00.51.01.57: RNCC: 5 | RNVC: 2

27 Apr 2006

5120-12-179-9680
Dorn

121799680
110810: RNCC: 3 | RNVC: 2
80.99617-0043: RNCC: 5 | RNVC: 2
80996170043: RNCC: 5 | RNVC: 2

14 Aug 1979

5120-12-179-9698
Ausbauvorrichtung

121799698
80996020051: RNCC: 3 | RNVC: 2
80.99602-0051: RNCC: 5 | RNVC: 2
142380: RNCC: 5 | RNVC: 2

14 Aug 1979

5120-12-372-2767
Mechanical Puller Attachment

123722767
1-250-P: RNCC: 3 | RNVC: 2

3 Jul 2007

5120-12-328-1054
Lamp Extractor

123281054
1.90900.003: RNCC: 3 | RNVC: 2

7 Apr 1992

5120-12-192-0310
Spanner Wrench

121920310
F1149001-0064: RNCC: 3 | RNVC: 2

22 Mar 1982

5120-12-370-0746
Ventil Auszieher

123700746
58512-0035: RNCC: 3 | RNVC: 2

18 Sep 2006

5120-12-321-1671
Mechanical Puller

123211671
0850 1857: RNCC: 3 | RNVC: 2
8501857: RNCC: 5 | RNVC: 2
8501857FC9368-64: RNCC: 5 | RNVC: 2

6 Apr 1990

5120-12-327-1664
Stud Inserter

123271664
0851 0464: RNCC: 3 | RNVC: 2
8510464: RNCC: 5 | RNVC: 2

10 Dec 1991

5120-12-380-7783
Open End Wrench

123807783
69520038: RNCC: 3 | RNVC: 2
69520038: RNCC: 5 | RNVC: 2

27 Nov 2009

5120-12-123-5509

5120-12-153-7181
Socket Wrench Socket

121537181
CH1773-21FE: RNCC: 3 | RNVC: 2
5615890508/00: RNCC: 5 | RNVC: 2
561589050800: RNCC: 5 | RNVC: 2
CH1773-21FE: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-183-1312
Spanner Wrench

121831312
S51647-0000: RNCC: 3 | RNVC: 2

20 Mar 1980

5120-12-372-5925
Socket Head Screw Key

123725925
DIN7445-5: RNCC: 2 | RNVC: 9
622500-5: RNCC: 3 | RNVC: 2
00855: RNCC: 3 | RNVC: 2

2 Aug 2007

5120-12-318-1212
Torque Wrench

123181212
730A/2: RNCC: 3 | RNVC: 2

13 Jun 1989

5120-12-162-3756
Mechanical Puller

121623756
V416-2: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-365-7606
Open End Wrench

123657606
40031314-TCS: RNCC: 3 | RNVC: 2

1 Feb 2005

5120-12-137-4235

5120-12-364-5633
Combination Box And Open End Wrench

123645633
40082222-TCS: RNCC: 3 | RNVC: 2

9 Oct 2004

5120-12-323-8297
Pliers

123238297
493AI: RNCC: 3 | RNVC: 2

21 Dec 1990

5120-12-126-3338
Hand Hammer

121263338
NO PRIMARY REF 12-126-3338: RNCC: 3 | RNVC: 2
DIN5165: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-156-7549
Combination Box And Open End Wrench

121567549
4020LM3-5: RNCC: 3 | RNVC: 2
61350-3,5: RNCC: 5 | RNVC: 2
613500-3,5: RNCC: 5 | RNVC: 2
107770: RNCC: 5 | RNVC: 2
40093535: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-304-7243
Montierhuelse

123047243
2-5435.1: RNCC: 3 | RNVC: 2
EW6: RNCC: 5 | RNVC: 2

15 Aug 1985

5120-12-370-6956
Torque Wrench

123706956
657200-40L: RNCC: 3 | RNVC: 2
08.06450-0003: RNCC: 5 | RNVC: 2
08064500003: RNCC: 5 | RNVC: 2

11 Dec 2006

5120-12-168-5149
Lagerbuechse

121685149
VG95211-ML-121685149: RNCC: 2 | RNVC: 2
160-88507-06: RNCC: 3 | RNVC: 2
160-88507-06: RNCC: 5 | RNVC: 9

18 Mar 1977

5120-12-329-6361
Electronic Equipment Alignment Tool

123296361
V22199-Z-C797: RNCC: 3 | RNVC: 2

11 Sep 1992

5120-12-165-9746
Open End Wrench

121659746
5100018-000000.02: RNCC: 2 | RNVC: 2
100332-13000W1: RNCC: 3 | RNVC: 2
5100018-00000002: RNCC: 5 | RNVC: 2
100332-13000W1: RNCC: 5 | RNVC: 9
5100018-000000-02: RNCC: 5 | RNVC: 9

24 Jul 1976

5120-12-365-6786
Injector Spring Compressor

123656786
038130069B: RNCC: 3 | RNVC: 2

24 Jan 2005

5120-12-332-6131
Spanner Wrench

123326131
532113-8122.903: RNCC: 3 | RNVC: 2
532113-8122.903: RNCC: 5 | RNVC: 9

30 Aug 1993

5120-12-332-8086
Op Montierwerkzeug

123328086
532117-8107.903: RNCC: 3 | RNVC: 2
532117-8107.903: RNCC: 5 | RNVC: 9

22 Sep 1993

5120-12-171-1941
Montagewerkzeug

121711941
80.99617-0028: RNCC: 3 | RNVC: 2
80996170028: RNCC: 3 | RNVC: 2

16 Sep 1977

5120-12-156-1564
Socket Wrench Socket

121561564
NM293-06: RNCC: 3 | RNVC: 2
NM293-06: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-311-8564
Spanner Wrench

123118564
4D11174: RNCC: 3 | RNVC: 2
X11.49001-2024: RNCC: 5 | RNVC: 2

22 Oct 1987

5120-12-190-9036
Mechanical Puller Attachment

121909036
2178-9939-000: RNCC: 3 | RNVC: 2
2178-9939-000: RNCC: 5 | RNVC: 9

21 Dec 1981

5120-12-346-9205
Socket Head Screw Key

123469205
9814-08: RNCC: 3 | RNVC: 2

28 Sep 1998

5120-12-176-1094
Auszieher

121761094
VW 2085: RNCC: 3 | RNVC: 2
2085: RNCC: 3 | RNVC: 2
C 6623 153: RNCC: 5 | RNVC: 2

9 Nov 1978

5120-12-389-3147
Seal Inserter

123893147
1X56 136 374: RNCC: 3 | RNVC: 2

20 Jun 2012

5120-12-090-9646

5120-12-364-5664
Socket Wrench Crowfoot Attachment

123645664
02200020-TCS: RNCC: 3 | RNVC: 2

9 Oct 2004

5120-12-362-5490
Socket Wrench

123625490
001 589 78 09 00: RNCC: 3 | RNVC: 2

6 Mar 2004

5120-12-302-2876
Mechanical Puller Forcing Screw

123022876
S1340: RNCC: 2 | RNVC: 2
S1340: RNCC: 5 | RNVC: 2

13 Dec 1984

5120-12-168-1535

5120-12-197-6379
Hand Beading Tool

121976379
2.6019: RNCC: 3 | RNVC: 2

9 Nov 1983

5120-12-309-7881
Flat Tip Screwdriver

123097881
NO PRIMARY REF 12-309-7881: RNCC: 3 | RNVC: 2
TVA5120-2-263-019: RNCC: 5 | RNVC: 1
TVA5120-2-263-019-1.1.1: RNCC: 5 | RNVC: 2
DIN5265-A-A0,4X2: RNCC: 5 | RNVC: 9

27 Feb 1987

5120-12-374-6156
Socket Head Screw Key Set

123746156
1505416: RNCC: 3 | RNVC: 2
4010886815014: RNCC: 5 | RNVC: 2
H 42 EL-88: RNCC: 5 | RNVC: 2
4010886815014: RNCC: 5 | RNVC: 2
H 42 EL-88: RNCC: 5 | RNVC: 2
1505416: RNCC: 5 | RNVC: 2

29 Feb 2008

5120-12-357-7723
Pliers

123577723
263/3: RNCC: 3 | RNVC: 2

22 Jul 2002

5120-12-311-7322
Drive Pin Punch

123117322
748C-6+: RNCC: 3 | RNVC: 2
4922980009: RNCC: 5 | RNVC: 2

12 Oct 1987

5120-12-339-5313
Torque Wrench Adapter

123395313
30/0-1/2: RNCC: 3 | RNVC: 2
1105727D00: RNCC: 5 | RNVC: 2

30 Nov 1995

5120-12-090-5529

5120-12-338-6993
Spanner Wrench

123386993
1361135-17003-00: RNCC: 3 | RNVC: 2
GZ1361135-17003-00: RNCC: 5 | RNVC: 9

17 Aug 1995

5120-12-177-7462
Ausdrueckvorrichtun

121777462
VG95211-ML-121777462: RNCC: 2 | RNVC: 2
1121-10161W2: RNCC: 3 | RNVC: 2

16 Feb 1979

5120-12-195-7184
Machinist's Vise

121957184
NO PRIMARY REF 12-195-7184: RNCC: 3 | RNVC: 2
10203AND10213: RNCC: 5 | RNVC: 9

31 Mar 1983

5120-12-002-0136

5120-12-389-5361
Socket Head Screw Key

123895361
48560020-TCS: RNCC: 3 | RNVC: 2

18 Jul 2012

5120-12-126-1308
Blacksmith's Bottom Fuller

121261308
0002400-15: RNCC: 3 | RNVC: 2
B15DIN7443: RNCC: 5 | RNVC: 2
24-15: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-370-8880
Socket Wrench Socket

123708880
80996060667: RNCC: 3 | RNVC: 2
80.99606-0667: RNCC: 5 | RNVC: 2

12 Jan 2007

5120-12-306-9286
Driftpin

123069286
E4-2009030: RNCC: 3 | RNVC: 2
E4-2009030: RNCC: 5 | RNVC: 9

17 Apr 1986

5120-12-159-8358
Lamp Extractor

121598358
3SX1300: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-306-0111
Socket Wrench

123060111
NO PRIMARY REF 12-306-0111: RNCC: 3 | RNVC: 2
0478156: RNCC: 5 | RNVC: 9
13530: RNCC: 5 | RNVC: 9
3861: RNCC: 5 | RNVC: 9
5719750022: RNCC: 5 | RNVC: 9

20 Jan 1986

5120-12-316-7169
Torque Wrench Adapter

123167169
CH1780/15: RNCC: 3 | RNVC: 2
CVR-F30374289: RNCC: 5 | RNVC: 2
CVR-F30374289: RNCC: 5 | RNVC: 2
F30374289: RNCC: 5 | RNVC: 2
CH1780/15: RNCC: 5 | RNVC: 9

7 Feb 1989

5120-12-357-2427
Tire Iron

123572427
0005813358: RNCC: 3 | RNVC: 2

24 May 2002

5120-12-154-5334
Spanner Wrench

121545334
23111-7238.00: RNCC: 2 | RNVC: 2
23111-7238.00: RNCC: 3 | RNVC: 2
23111-7238.00: RNCC: 3 | RNVC: 2
1136000: RNCC: 5 | RNVC: 2
1 136 000: RNCC: 5 | RNVC: 9
1136000: RNCC: 5 | RNVC: 9
23111-7238.00: RNCC: 5 | RNVC: 9
23111-7238-00: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-174-9592
Mechanical Puller

121749592
6.815-021.0: RNCC: 3 | RNVC: 2
6-815-021: RNCC: 5 | RNVC: 9
6.815-021: RNCC: 5 | RNVC: 9
444.31-843-100: RNCC: 5 | RNVC: 9

15 Aug 1978

5120-12-126-2652
Pipe Wrench

121262652
130015: RNCC: 3 | RNVC: 2
573F201-710: RNCC: 3 | RNVC: 2
130-32: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-168-6340
Spanner Wrench

121686340
8070020000001: RNCC: 3 | RNVC: 2
807002-0000.001: RNCC: 5 | RNVC: 2
807002-0000001: RNCC: 5 | RNVC: 2

25 Mar 1977

5120-12-306-6022
Z Einstellwerkzeug

123066022
0276121000: RNCC: 3 | RNVC: 2
S000276121000000: RNCC: 3 | RNVC: 2

14 Mar 1986

5120-12-300-9688
Montage- Hebel

123009688
3139V(4): RNCC: 3 | RNVC: 2
3139V: RNCC: 5 | RNVC: 2

13 Sep 1984

5120-12-355-9520
Elektron Auszieher

123559520
B0192625: RNCC: 3 | RNVC: 2

9 Jan 2002

5120-12-342-6106
Crimping Tool Die

123426106
VG95236T11AA107: RNCC: 2 | RNVC: 2
MRP0849: RNCC: 3 | RNVC: 9

6 Mar 1997

5120-12-370-0334
Montage- Hebel

123700334
9266594000: RNCC: 3 | RNVC: 2

6 Sep 2006

5120-12-342-6096
Crimping Tool Die

123426096
VG95236T11AA003: RNCC: 2 | RNVC: 2
MRP0839: RNCC: 3 | RNVC: 9

6 Mar 1997

5120-12-327-4650
Hand Beading Tool

123274650
15390108: RNCC: 3 | RNVC: 2
153 901 08: RNCC: 5 | RNVC: 2

27 Jan 1992

5120-12-123-5027
Open End Wrench

121235027
TFS00-08331: RNCC: 3 | RNVC: 2
TFS00-08331: RNCC: 5 | RNVC: 9
TFS00-08331: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-346-7387
Socket Wrench Socket

123467387
466-15: RNCC: 3 | RNVC: 2
02120015: RNCC: 5 | RNVC: 2

2 Sep 1998

5120-12-163-6096
Einpreszwerkzeug

121636096
VG95211-ML-121636096: RNCC: 2 | RNVC: 2
105-40284W1: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-316-3071
Socket Head Screw Key Blade

123163071
9921BP: RNCC: 3 | RNVC: 2
42520200: RNCC: 3 | RNVC: 9
99-21BP: RNCC: 5 | RNVC: 9

9 Jan 1989

5120-12-369-8455
Swivel Knob Jeweler's Screwdriver

123698455
165 PH00: RNCC: 3 | RNVC: 2
4752-00: RNCC: 3 | RNVC: 2
05118020001: RNCC: 3 | RNVC: 2
2050-PH00X60: RNCC: 5 | RNVC: 2
6442770: RNCC: 5 | RNVC: 2
47520010: RNCC: 5 | RNVC: 2
118020: RNCC: 5 | RNVC: 9
2050-PH00: RNCC: 5 | RNVC: 9

21 Aug 2006

5120-12-368-6820
Zentrier- Kegel

123686820
2300519-993013.001.0: RNCC: 3 | RNVC: 2

6 Apr 2006

5120-12-389-0107
Mecha Ejector Tool

123890107
R.MKA1.6300.00: RNCC: 2 | RNVC: 2
R.MKA1.6300.00: RNCC: 3 | RNVC: 2

16 May 2012

5120-12-307-9673
Blindni Mundstueck

123079673
GBM30-361: RNCC: 3 | RNVC: 2
361: RNCC: 5 | RNVC: 2
7222610: RNCC: 5 | RNVC: 2

14 Aug 1986

5120-12-330-4079
Mechanical Puller Attachment

123304079
26-21C1143G001P8: RNCC: 3 | RNVC: 2

11 Dec 1992

5120-12-192-1065
Dicht Montagehuelse

121921065
EFEP558: RNCC: 3 | RNVC: 2
BOSCH-EFEP558: RNCC: 5 | RNVC: 2
BOSCH-EFEP558: RNCC: 5 | RNVC: 2

23 Mar 1982

5120-12-152-1779
Schluessel

121521779
532686-9004.000: RNCC: 3 | RNVC: 2
532686-9004: RNCC: 5 | RNVC: 9
532686-9004.000: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-120-9221
Open End Wrench

121209221
571A613-15-16X1-1-16IN: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-150-2742
Schn Abziehbruecke

121502742
23176-264560.00.0: RNCC: 2 | RNVC: 2
23176-264560-00-0: RNCC: 2 | RNVC: 2
23176-264560-00-0: RNCC: 5 | RNVC: 2
23176-264560.00.0: RNCC: 5 | RNVC: 2
23176-264560-00-0: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-368-6916
Socket Wrench Screwdriver Attachment

123686916
3210IN-9: RNCC: 3 | RNVC: 2
00.49.75.28: RNCC: 5 | RNVC: 2

6 Apr 2006

5120-12-367-8513
Torque Wrench Adapter

123678513
2593-4: RNCC: 3 | RNVC: 2

24 Oct 2005

5120-12-124-8492
Piston Ring Compressor

121248492
35-10-20: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-339-3228
Auswechs Klemmteil

123393228
E11.59645-0002: RNCC: 3 | RNVC: 2
596-092: RNCC: 5 | RNVC: 2
596-092: RNCC: 5 | RNVC: 9
E11.59645-0002: RNCC: 5 | RNVC: 9

9 Nov 1995

5120-12-302-2473
Crimping Tool Die

123022473
76Z-0-2-51: RNCC: 3 | RNVC: 2

11 Dec 1984

5120-12-183-1314
Spanner Wrench

121831314
S51649-0000: RNCC: 3 | RNVC: 2

20 Mar 1980

5120-12-354-7176
Torque Wrench

123547176
760/30: RNCC: 3 | RNVC: 2
51040030: RNCC: 5 | RNVC: 2
0926259: RNCC: 5 | RNVC: 2
5120-40442: RNCC: 6 | RNVC: 9

17 Aug 2001

5120-12-180-0978
Einbauvorrichtung

121800978
VG95211-ML-121800978: RNCC: 2 | RNVC: 2
P-895055-403: RNCC: 3 | RNVC: 2
P895055-403: RNCC: 5 | RNVC: 2
MAGERD 2056: RNCC: 5 | RNVC: 9

20 Aug 1979

5120-12-315-4869
Slip Joint Pliers

123154869
760N-1: RNCC: 3 | RNVC: 2
5371980005: RNCC: 5 | RNVC: 2

29 Oct 1988

5120-12-148-0664
Socket Head Screw Key

121480664
053096E: RNCC: 3 | RNVC: 2
WZ78: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-331-6244
Schluessel

123316244
80996030175: RNCC: 3 | RNVC: 2
80.99603.0175: RNCC: 5 | RNVC: 2
V1056: RNCC: 5 | RNVC: 2

1 Jun 1993

5120-12-123-5577

5120-12-313-1050
Elektron Auszieher

123131050
07L118: RNCC: 3 | RNVC: 2

4 Mar 1988

Load More Results