What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.

What is a Grommet Inserting Punch And Die?

A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Blacksmith's Punch?

A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Tap Extractor?

A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Mechanical Finger?

A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

A Crowbar is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hand Caulking Tool?

A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Screwdriver And Wrench Assembly?

A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Drill Drift?

A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

What is a Fuse Puller?

A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.

What is a Hand Lead Seal Press?

A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.

What is a Hand Beading Tool?

A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.

Hand Tools, Nonedged, Nonpowered - Germany (DE)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by Germany (DE) - NCB is 12

Page 53 of 62

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by Germany

51	20	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - Germany (DE)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 15 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Hand Vise? 31 Items: A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.
What is a Grommet Inserting Punch And Die? 25 Items: A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.
What is a Hand Hydraulic Jack? 111 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 93 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 587 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 13 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
What is a Hand Tube Flaring Tool? 32 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Blacksmith's Punch? 17 Items: A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.
What is a Drain Plug Wrench? 21 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 76 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 14 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 1670 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
What is a Pipe Wrench? 54 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 165 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 55 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
What is a Tap Extractor? 13 Items: A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.
Screwdriver,Offset 77 Items
What is a Screwdriver Bit? 446 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Mechanical Finger? 17 Items: A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.
What is a Socket Wrench Socket? 1303 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 876 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 1273 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 17 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 282 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
What is a Hand Tube Bender? 49 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 669 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 39 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pinch Bar? 17 Items: A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.
What is a Wrecking Bar? 10 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Crowbar? 12 Items: A Crowbar is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 356 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 484 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 37 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 110 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
What is a Hand Caulking Tool? 13 Items: A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.
Face,Hammer,Inserted 54 Items
What is a Hole Sheet Metal Holder? 40 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Screwdriver And Wrench Assembly? 10 Items: A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.
What is a Hand Rivet Set? 62 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Drill Drift? 11 Items: A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.
What is a Socket Wrench Handle Bar? 160 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Stake,Sheet Metalworking 33 Items
Riveter,Blind,Hand 31 Items
What is a Hand Shovel? 24 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 37 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 20 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
Block,Dolly,Sheet Metalworking 33 Items
What is a Piston Ring Compressor? 61 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Fuse Puller? 22 Items: A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.
What is a Hand Lead Seal Press? 12 Items: A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.
What is a Hand Beading Tool? 54 Items: A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.
What is a Hand Hammer? 406 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
Head,Hand Hammer 11 Items
What is a Lamp Extractor? 95 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Carpenters' Pincers? 16 Items: A Carpenters' Pincers (PINCERS,CARPENTERS') is a plierlike hand tool having two opposing jaws which may have hammerlike backs. One handle has a nail or tack pulling claw, the other is shaped to form a screwdriver. The tool may contain a wire cutter. See also NIPPERS, END CUTTING and PINCERS, FARRIERS'.
What is a Farrier's Pincers? 20 Items: A Farrier's Pincers (PINCERS,FARRIER'S) is a plierlike hand tool having two opposing jaws which are designed for removing horseshoes. The handles may have plain or ball ends. See also NIPPERS, END CUTTING and PINCERS, CARPENTERS'.
What is a Hand Pipe And Sewer Auger? 15 Items: A Hand Pipe And Sewer Auger (AUGER,PIPE AND SEWER,HAND) is a flexible spring wire or tape, with a cleaning or boring head at one or both ends. A handle may be provided for turning and pushing. It may also include a metal housing and/or reel in which the tape is coiled. Excludes AUGER, WATER CLOSET, HAND.
What is a Hand Roller? 23 Items: A Hand Roller (ROLLER,HAND) is a hand-held item consisting of a roller on an axle attached to a handle. The width of the roller face (surface) is more than 1/4 inch. See also STITCHER, CEMENTING AND VULCANIZING. Excludes INKING ROLLER, HAND and paint rollers.
What is a Trowel? 36 Items: A Trowel is a tool used for bricklaying, concrete work, plastering, linoleum laying, and masonry work. Excludes CORNER TOOL, CONCRETE.
What is a Hand Abrasive Wheel Dresser? 11 Items: A Hand Abrasive Wheel Dresser (DRESSER,ABRASIVE WHEEL,HAND) is a tool designed to remove glaze from, dress, shape, sharpen, and true solid abrasive wheels. Excludes NIB, DIAMOND, WHEEL DRESSING.
What is a Lamp Cap Extractor? 26 Items: A Lamp Cap Extractor (EXTRACTOR,LAMP CAP) is a tool specifically designed to facilitate the removal of lamp caps from switchboards, panels or indicator lamps.
Replacing Tool,Engine Valve Seat Insert 10 Items
What is a Rivet Bucking Bar? 20 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 154 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 175 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Woven Cable Grip? 30 Items: A Woven Cable Grip (GRIP,CABLE,WOVEN) is a braided wire device designed to clutch a bare or insulated conductor, cable or wire rope, for holding taut or drawing through conduit.
What is a Screw Thread Insert Extractor? 16 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is a Hand Helical Spring Puller Hook? 12 Items: A Hand Helical Spring Puller Hook (HOOK,HELICAL SPRING PULLER,HAND) is a hook whose curved end conforms to Style AP10 of Reference Drawing Group AP.
What is an Electron Tube Extractor? 12 Items: An Electron Tube Extractor (EXTRACTOR,ELECTRON TUBE) is a hand tool designed to facilitate the removal of electron tubes from electronic equipment and to avoid burning the fingers. It may be used for installing tubes.
What is a Cross Tip Screwdriver? 224 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 208 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 61 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 163 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Tool Handle Wedge? 42 Items: A Tool Handle Wedge (WEDGE,TOOL HANDLE) is excludes WEDGE, WOOD.
What is a Valve Tappet Adjusting Tool? 14 Items: A Valve Tappet Adjusting Tool (ADJUSTING TOOL,VALVE TAPPET) is a hand device for adjusting overhead valve tappets of internal combustion engines. It consists of a handle, and at one end a wrench opening or a drive for a replaceable wrench socket, and a knob operated screwdriver tip. The wrench opening (or socket) engages the tappet adjusting screw lock nut and the screwdriver engages the screw.
What is a Hand Powered Poppet Valve Lapper? 16 Items: A Hand Powered Poppet Valve Lapper (LAPPER,POPPET VALVE,HAND POWERED) is a hand tool designed to rotate and/or oscillate poppet type valves in their seats for reseating purposes.
What is a Marlinespike? 11 Items: A Marlinespike is a metal hand tool made in the shape of a tapered pin. One end is pointed and the opposite end may be headed. The body may contain an eye for a lanyard sling, or be grooved lengthwise. Excludes CABLE PICK and FID.
What is an Aligning Punch? 104 Items: An Aligning Punch (PUNCH,ALIGNING) is a round, square, hexagonal or octagonal bodied hand tool, having a round tapered section 6-1/2 inches (165.1 mm) or more in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, DRIFT and DRIFTPIN.
What is a Drift Punch? 39 Items: A Drift Punch (PUNCH,DRIFT) is a round, square, hexagonal, or octagonal bodied hand tool, having a round tapered section 4 to 6 inches (101.6 mm to 152.4 mm) inclusive in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, ALIGNING; and DRIFTPIN.
What is a Socket Wrench Adapter-Extension? 11 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 21 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 149 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Wrench Extension Handle? 36 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Crowfoot Wrench Head Socket? 13 Items: A Crowfoot Wrench Head Socket (SOCKET,CROWFOOT WRENCH HEAD) is a component with an open-wall opening having one end designed to fit into a HEAD, CROWFOOT SOCKET WRENCH and the other end having an internal opening such as hexagonal or 8-point. See also CROWFOOT ATTACHMENT, SOCKET WRENCH.
What is a Socket Wrench Crowfoot Attachment? 267 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 18 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 40 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 35 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 998 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 350 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 102 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 468 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 42 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand-Operated Grommet And Eyelet Press? 14 Items: A Hand-Operated Grommet And Eyelet Press (PRESS,GROMMET AND EYELET,HAND-OPERATED) is a device which punches or pierces holes and in addition fastens or sets eyelets and grommets in cloth, paper and similar material. May be used for fastening or setting rivets, lacing hooks and snaps in cloth, paper and similar material. It is hand operated by lever or screw action. See also PUNCH, EYELET, PLIER TYPE and PRESS, GROMMET AND EYELET, FOOT OPERATED.
What is a Claw Bar? 27 Items: A Claw Bar (BAR,CLAW) is before using, refer to Reference Drawing Group AG.
What is a Pin Vise? 12 Items: A Pin Vise (VISE,PIN) is a clamping device used to hold small items which are usually round. The device consists of a hollow handle having a chuck at one or both ends. The longitudinal axis of the hollow handle is in alignment with that of the chuck(s).
What is a Dapping Punch? 16 Items: A Dapping Punch (PUNCH,DAPPING) is an item consisting of steel bar having one end ball shaped. It is used to form flat metal sheets into a hemispherical shape by working it against a die and striking the opposite end of punch with a hammer.
What is a Tire Iron? 29 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 123 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Machinist's Vise? 64 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Clamp Base Bench Vise? 10 Items: A Clamp Base Bench Vise (VISE,BENCH,CLAMP BASE) is a clamping device consisting of a base, one stationary and one manual screw actuated jaw, and one or more guide bars or rods. Designed with an integral clamp for attaching to a bench, table, or the like. Does not include pipe holding jaws.
What is a Fixed Open End Wrench Set? 61 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Socket Wrench Set? 241 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is a Combination Box And Open End Wrench Set? 48 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Box Wrench Set? 32 Items: A Box Wrench Set (WRENCH SET,BOX) is a group of box wrenches having different characteristics. It may include a HANDLE, EXTENSION WRENCH. See also WRENCH SET, COMBINATION, BOX AND OPEN END.
Spoon,Body And Fender 15 Items
What is a Wrench Kit? 26 Items: A Wrench Kit is an assortment of various types and sizes of wrenches such as SOCKET, SOCKET WRENCH; WRENCH, OPEN END, FIXED; WRENCH, BOX and the like. It may include adapter(s), ratchet(s) and the like. See also WRENCH SET (as modified.
What is a Screw Extractor Set? 14 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 24 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
Jack,Scissors,Hand 17 Items
Pick,Digging 13 Items
What is a Hand Intrenching Tool? 13 Items: A Hand Intrenching Tool (INTRENCHING TOOL,HAND) is a shovel type tool or a pick and shovel combination having standard cutting blade edges or specially designed blade edges for cutting and chopping. It may have a handgrip on the handle. It is designed to be used by individual soldiers primarily for intrenching. Refer to Reference Drawing Group BG for styles.
What is a Piston Ring Expander? 28 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
What is a Joint Breaking Wedge? 12 Items: A Joint Breaking Wedge (WEDGE,JOINT BREAKING) is refer to Reference Drawing Group A before using item name.
Blade,Saddler's Harness Awl 15 Items
Mallet,Rubber 11 Items
What is a Rack Bar Jack? 24 Items: A Rack Bar Jack (JACK,RACK BAR) is excludes JACK, BUMPER and JACK, REEL, HAND.
What is a Hand Tube Flaring Punch? 15 Items: A Hand Tube Flaring Punch (PUNCH,TUBE FLARING,HAND) is a noncutting tool having a shaped end or section designed to flare the ends of tubes. One type is designed to flare the ends of tubes against a tube sheet, and another to flare tube ends to mate with tube fittings. Includes punch components of FLARING TOOL, TUBE, HAND.
What is a Hose Strap Band Clamping Tool? 14 Items: A Hose Strap Band Clamping Tool (CLAMPING TOOL,STRAP BAND,HOSE) is an item designed to tension and lock metal straps around a rubber hose, and the like. It is also used to clamp and hold fittings therein.
What is a Socket Wrench Handle Ratchet Head? 15 Items: A Socket Wrench Handle Ratchet Head (RATCHET HEAD,SOCKET WRENCH HANDLE) is a reversible ratcheting mechanism having a square external end designed to fit into the internal end of a wrench socket or attachment, and has provisions for a round bar grip, but does not include the bar. When furnished with a bar, see HANDLE, SOCKET WRENCH. Excludes RATCHET ATTACHMENT, SOCKET WRENCH.
What is an Etching Needle? 10 Items: An Etching Needle (NEEDLE,ETCHING) is a styluslike tool mounted in a handle. It is used in preparing metal lithographic plates and photo engravings. See also ETCHING POINT.
What is a Mechanical Puller? 1147 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 505 Items
What is a Slip Joint Pliers? 95 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Jewelers' Pliers? 11 Items: A Jewelers' Pliers (PLIERS,JEWELERS') is a tool having jaws designed for use in the assembly and repair of jewelry, watches, and the like. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 112 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 14 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 16 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 35 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 19 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 32 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 73 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Refrigeration Valve Stem Wrench Socket? 10 Items: A Refrigeration Valve Stem Wrench Socket (SOCKET,WRENCH,REFRIGERATION VALVE STEM) is an item having a 1/4 inch (6.3 mm) square external drive on one end, and a square internal opening at the other end. The outside diameter is specially sized to clear openings in refrigeration valve bonnets and covers for reaching recessed stems. It is designed for use with a ratchet wrench for opening and/or closing square stem refrigeration valves.
What is a Drive Pin Punch Set? 27 Items: A Drive Pin Punch Set (PUNCH SET,DRIVE PIN) is a group of PUNCH, DRIVE PIN having different characteristics.
What is a Mechanical Puller Step Plate? 72 Items: A Mechanical Puller Step Plate (STEP PLATE,MECHANICAL PULLER) is a circular disk, flanged to provide a shoulder, and designed to provide a base for the screw point of a PULLER, MECHANICAL when pulling externally mounted bearings, gears, and the like from hollow shafts or housings. It has a concentric, countersunk hole to accommodate the puller screw point.
What is a Solid Center Punch? 26 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Cable Type Ratchet Lever Puller? 34 Items: A Cable Type Ratchet Lever Puller (PULLER,RATCHET LEVER,CABLE TYPE) is an item consisting of a metal frame and ratchet lever reel to which is attached one end of a flexible cable (wire rope). The cable feeds through the fast eye in the metal frame, and may be reeved through a slip hook tackle hook. See also BINDER, LOAD; HOIST, WIRE ROPE and STRETCHER, WIRE.
What is a Hand Yoke Riveter? 13 Items: A Hand Yoke Riveter (RIVETER,YOKE,HAND) is a hand tool designed to install metallic grommets and/or tubular rivets by forcing the unflanged end of the grommet/rivet outward to form another flange which prevents the grommet/rivet from coming out of the item it has been installed in. The tool uses a pliers type pinching action to form the flange. See also PUNCH, EYELET, PLIER TYPE.
What is a Hand Material Handling Hook? 17 Items: A Hand Material Handling Hook (HOOK,MATERIAL HANDLING,HAND) is a hook whose curved end conforms to Style AP1, AP2, AP3 or AP4 of Reference Drawing Group AP. Excludes HOOK, MANHOLE COVER, HAND; HOOK, WIRE BREAKING, HAND; HOOK, ROCK CRUSHER FEEDING, HAND; HOOK, STRAINER REMOVING, HAND and HOOKS, BAG HANDLING, HAND.
What is a Magnetic Retrieving Tool? 22 Items: A Magnetic Retrieving Tool (RETRIEVING TOOL,MAGNETIC) is a hand-operated magnetic device used to locate and pick up metallic articles, such as bolts, nuts, pins, washers, and the like, in confined spaces. It may be rigid, flexible or adjustable. Excludes FINGER, MECHANICAL.
What is a Mechanical Puller Adapter? 68 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Socket Head Screw Socket Wrench Attachment Wrench Set? 10 Items: A Socket Head Screw Socket Wrench Attachment Wrench Set (WRENCH SET,SOCKET HEAD SCREW SOCKET WRENCH ATTACHMENT) is an assortment of various size SOCKET WRENCH ATTACHMENT, SOCKET HEAD SCREW, and HANDLE, SOCKET WRENCH. It may include universal joints, ratcheting adapters and other attachments used therewith.
What is a Mechanical Puller Forcing Screw? 66 Items: A Mechanical Puller Forcing Screw (FORCING SCREW,MECHANICAL PULLER) is a cylindrical, threaded item which may be headed or headless. It may include a threadless portion. All or part of the unthreaded portion(s) must be of a single diameter equal to or smaller than the maximum major diameter of the threaded portion(s). Headless items must have an external or internal wrenching feature or have a provision to facilitate turning. The item must be designed to exert pressure by screwing motion when used with a mechanical puller.
What is a Screw Thread Insert Inserter? 66 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Flat Tip Screwdriver Set? 18 Items: A Flat Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP) is a group of SCREWDRIVER, FLAT TIP having different characteristics.
What is a Terminal Crimping Tool Contact Positioner? 16 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 25 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is a Screw Thread Insert Tang Breakoff Tool? 37 Items: A Screw Thread Insert Tang Breakoff Tool (TANG BREAKOFF TOOL,SCREW THREAD INSERT) is a punch designed to fit within a coiled wire thread insert to manually or mechanically break off the tang by which the insert was threaded into the hole.
What is a Multiposition Vise? 11 Items: A Multiposition Vise (VISE,MULTIPOSITION) is a clamping device consisting of a workholding head and a base provided with swiveling, tilting, and locking arrangement. Designed to be bolt mounted to a bench, table, or the like and constructed so that the workholding head can be swiveled 360 degrees (6.3 radians) in a horizontal plane and tilted from a normal level position downward at least 90 degrees (1.6 radians), and locked in any desired position within the swiveling and tilting ranges. Intended for use in manufacturing and maintenance of mechanical and electronic parts and assemblies or any light bench work. See also VISE, PATTERNMAKER'S.
What is an Adjustable Wrench? 84 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 177 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 40 Items
Handle,Shovel 22 Items
What is a Torque Wrench Set? 13 Items: A Torque Wrench Set (WRENCH SET,TORQUE) is an assortment or two or more torque wrenches or various sizes. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH; and BIT, SCREWDRIVER.
What is a Retaining Ring Installation Tool? 12 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Bearing And Bushing Inserter? 626 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 59 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 466 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 23 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 18 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 80 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 23 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 12 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 12 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Seal Inserter And Remover? 42 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 158 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is an Electrical Contact Inserter And Remover? 21 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Pin Inserter? 28 Items: A Pin Inserter (INSERTER,PIN) is a hand tool designed to facilitate the insertion of a pin into a hole.
What is a Piston Inserter? 39 Items: A Piston Inserter (INSERTER,PISTON) is a tool designed to permit installation of a piston or piston assembly without damaging the packings or piston.
What is a Spring Inserter And Remover? 23 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 11 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Stud Inserter? 20 Items: A Stud Inserter (INSERTER,STUD) is a device designed to drive in studs. It does not have any facilities for removing or extracting studs. See also INSERTER AND REMOVER, STUD.
What is a Stud Inserter And Remover? 13 Items: A Stud Inserter And Remover (INSERTER AND REMOVER,STUD) is a group of items designed to extract and to drive studs. It may include collets, guides, housings, holders and the like. See also REMOVER SET, STUD and INSERTER, STUD.
What is a Gear Inserter? 10 Items: A Gear Inserter (INSERTER,GEAR) is a hand tool designed to install various gears onto a gearshaft. It may be operated by a pushing or a striking force.
What is a Crimping Tool Die? 145 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is an Electrical Connector Inserter? 10 Items: An Electrical Connector Inserter (INSERTER,ELECTRICAL CONNECTOR) is a hand tool designed to hold an electrical connector, and to assist in the positioning and installation of the connector on a cover, panel or the like.
What is a Float? 11 Items: A Float is a tool used for concrete, plastering and grouting work.
What is a Mechanical Puller Set? 19 Items: A Mechanical Puller Set (PULLER SET,MECHANICAL) is two or more separate PULLER, MECHANICAL of different fixed sizes.
What is a Lifting Pneumatic Bag? 28 Items: A Lifting Pneumatic Bag (PNEUMATIC BAG,LIFTING) is a device made of flexible material designed to lift another item by being placed under the item and being inflated with air or some other gas. It will have a means of being connected to an air or gas source and may include a connector hose, a control valve and/or a pressure regulator.
What is a Lifting Pneumatic Bag Kit? 12 Items: A Lifting Pneumatic Bag Kit (PNEUMATIC BAG KIT,LIFTING) is a collection of items consisting of two or more PNEUMATIC BAG, LIFTING, connecting cords, lanyards, feeding hoses and the like required for lifting an item when normal jacking conditions are not applicable. May include items for packaging the individual parts.
What is a Bearing Staking Installation Tool? 14 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
What is a Sealant Dispenser? 15 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Retaining Ring Pliers Set? 10 Items: A Retaining Ring Pliers Set (PLIERS SET,RETAINING RING) is a group of PLIERS, RETAINING RING having different characteristics.
What is a Pedal Adjustment Tool Compressor? 38 Items: A Pedal Adjustment Tool Compressor (COMPRESSOR,TOOL,PEDAL ADJUSTMENT) is a hand tool having hinged leverage handles designed to compress both ends of a spring to facilitate installation.
What is a Plug Electrical Connector Extractor? 20 Items: A Plug Electrical Connector Extractor (EXTRACTOR,ELECTRICAL CONNECTOR,PLUG) is a hand tool designed to disassemble CONNECTOR, PLUG, ELECTRICAL from a CONNECTOR, RECEPTACLE, ELECTRICAL.
What is a Screwdriver Handle? 12 Items: A Screwdriver Handle (HANDLE,SCREWDRIVER) is an item used to accommodate various types of BIT, SCREWDRIVER. It is designed to rotate a bit that is used for installing or removing screws.
What is a Wire Twister Pliers? 11 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 313 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is a Flat Tip And Cross Tip Screwdriver Set? 22 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is an Oil Filter Wrench? 14 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 442 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Rotating Members Aligning Tool? 29 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
Arm,Handling Tool 16 Items
What is a Splicing Sleeve Compressing Tool? 11 Items: A Splicing Sleeve Compressing Tool (COMPRESSING TOOL,SPLICING SLEEVE) is a hand tool having hinged leverage handles similar to a CUTTER, BOLT or pliers, designed to compress a splicing sleeve when joining the ends of two conductors, or when forming an eye splice in the end of a wire rope. Excludes CRIMPING TOOL, TERMINAL, HAND.
Handle,Hydraulic Jack 30 Items
What is a Manual Impact Wrench? 17 Items: A Manual Impact Wrench (WRENCH,IMPACT,MANUAL) is a manually operated handheld tool consisting of spring-loaded handle and a power-impact head which delivers a torsional impact from either continuous movement of the handle in one direction, or by a reciprocating action. It is used in tightening and loosening fasteners, such as bolts, nuts, and the like. The item may include sockets, extensions and offset fittings, nut runners, and the like.
What is a Torque Screwdriver? 15 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.

Stock Items From Supply Class 5120 Page 53 of 62

5120-12-183-2172
Abzieher Buchse

121832172
51-006: RNCC: 3 | RNVC: 2

28 Mar 1980

5120-12-343-7082
Socket Wrench

123437082
4328-11: RNCC: 3 | RNVC: 2
43280011: RNCC: 5 | RNVC: 2

16 Jul 1997

5120-12-093-7234

5120-12-141-6548
Socket Wrench Set

121416548
571D111BSATZ: RNCC: 3 | RNVC: 2
571D1113SATZ: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-306-8031
Drill Drift

123068031
21165010: RNCC: 3 | RNVC: 9

3 Apr 1986

5120-12-010-9613

5120-12-330-0244
Screwdriver Bit

123300244
3500.827.04: RNCC: 3 | RNVC: 2

23 Oct 1992

5120-12-042-2713

5120-12-126-4932
Sheet Metalworking Stake

121264932
91.01: RNCC: 3 | RNVC: 2
0091010000: RNCC: 5 | RNVC: 2
5048-2-110: RNCC: 5 | RNVC: 9
631B120-110: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-366-1954
Tool Handle Wedge

123661954
TL5120-0137-020: RNCC: 2 | RNVC: 2
8594000: RNCC: 3 | RNVC: 2
E-5-200: RNCC: 3 | RNVC: 9
4010883859400: RNCC: 5 | RNVC: 2
E-5-200: RNCC: 5 | RNVC: 2
4010883859400: RNCC: 5 | RNVC: 9
8594000: RNCC: 5 | RNVC: 9

18 Mar 2005

5120-12-151-0553
Lagerbu Spannhuelse

121510553
1X46951092: RNCC: 3 | RNVC: 2
V95109-2: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-305-6427
Socket Wrench

123056427
DIN3125-14: RNCC: 2 | RNVC: 2
4510015: RNCC: 3 | RNVC: 2
52164140: RNCC: 3 | RNVC: 9
425-14: RNCC: 3 | RNVC: 9
214574: RNCC: 5 | RNVC: 9
33BP-N14: RNCC: 5 | RNVC: 9
214574: RNCC: 5 | RNVC: 9
33BP-N14: RNCC: 5 | RNVC: 9
DIN 3125-14: RNCC: 5 | RNVC: 9

28 Nov 1985

5120-12-391-0350
Hand Terminal Crimping Tool

123910350
2912514-01: RNCC: 3 | RNVC: 2

16 Jan 2013

5120-12-384-7370
Blacksmiths' Tongs

123847370
51.000.018: RNCC: 3 | RNVC: 2
51.000.018: RNCC: 5 | RNVC: 2

24 Mar 2011

5120-12-363-9546
Bearing And Bushing Inserter

123639546
T671P5002108: RNCC: 3 | RNVC: 2

6 Aug 2004

5120-12-330-2051
Socket Wrench Socket

123302051
03.364.29.02.0-95: RNCC: 3 | RNVC: 2

13 Nov 1992

5120-12-315-5864
Hand Hydraulic Jack

123155864
015.992.1: RNCC: 3 | RNVC: 2
402 021.9: RNCC: 5 | RNVC: 2
AH25-240: RNCC: 5 | RNVC: 2
0005838715: RNCC: 5 | RNVC: 2

10 Nov 1988

5120-12-369-3060
Socket Wrench Adapter

123693060
2300515-186020.002.0: RNCC: 3 | RNVC: 2

20 Jun 2006

5120-12-375-8494
Socket Wrench Handle

123758494
512SG-QR: RNCC: 3 | RNVC: 2
13110030: RNCC: 5 | RNVC: 2
512SGS: RNCC: 5 | RNVC: 2

11 Jul 2008

5120-12-364-3123
Socket Wrench Socket

123643123
01010045-TCS: RNCC: 3 | RNVC: 2

9 Sep 2004

5120-12-172-0486
Socket Wrench

121720486
6400M6: RNCC: 3 | RNVC: 2
157287: RNCC: 5 | RNVC: 2

13 Dec 1977

5120-12-392-9810
Socket Head Screw Key

123929810
508 203 40: RNCC: 3 | RNVC: 2
4007157221612: RNCC: 5 | RNVC: 2

29 Jul 2013

5120-12-196-9041
Spanner Wrench

121969041
009-027.300-003W1: RNCC: 3 | RNVC: 2

30 Aug 1983

5120-12-190-5812
Einstel Schluessel

121905812
1000078-002500: RNCC: 2 | RNVC: 2
8PE 128 915-00: RNCC: 3 | RNVC: 2
128915-00: RNCC: 5 | RNVC: 2
8PE128915-00: RNCC: 5 | RNVC: 9
1000078-002500: RNCC: 5 | RNVC: 9

7 Dec 1981

5120-12-176-2231
Drive Pin Punch

121762231
51288039: RNCC: 3 | RNVC: 9

13 Nov 1978

5120-12-383-4373
Pin Inserter

123834373
000-092: RNCC: 3 | RNVC: 2

20 Oct 2010

5120-12-091-2913

5120-12-194-0841
Torque Wrench Adapter

121940841
TL5120-0086-760: RNCC: 2 | RNVC: 2
6630D-32: RNCC: 5 | RNVC: 9
21/DCA-32: RNCC: 5 | RNVC: 9
6264110020: RNCC: 5 | RNVC: 9
732/40 32: RNCC: 5 | RNVC: 9
732/40-32: RNCC: 5 | RNVC: 9

29 Sep 1982

5120-12-364-3469
Combination Box And Open End Wrench

123643469
40081111-TCS: RNCC: 3 | RNVC: 2

14 Sep 2004

5120-12-364-6794
Socket Wrench Socket

123646794
03010024-TCS: RNCC: 3 | RNVC: 2

20 Oct 2004

5120-12-331-8909
Socket Wrench Adapter-Extension

123318909
05051538001: RNCC: 3 | RNVC: 2
051835: RNCC: 3 | RNVC: 9
830: RNCC: 5 | RNVC: 2
51835: RNCC: 5 | RNVC: 9

1 Jul 1993

5120-12-322-2987
Pliers

123222987
844601991: RNCC: 3 | RNVC: 2

9 Aug 1990

5120-12-386-1591
Driftpin

123861591
80996060695: RNCC: 3 | RNVC: 2
80.99606-0695: RNCC: 5 | RNVC: 2

12 Aug 2011

5120-12-364-6770
Drive Pin Punch

123646770
70090008-TCS: RNCC: 3 | RNVC: 2

20 Oct 2004

5120-12-177-5790
Haltevorrichtung

121775790
UFG304-22: RNCC: 3 | RNVC: 2
UFG304-22: RNCC: 3 | RNVC: 9

7 Feb 1979

5120-12-144-6295
Trag Montagestempel

121446295
2360-264126.00.0: RNCC: 2 | RNVC: 2
2360-264126.00.0: RNCC: 3 | RNVC: 2
2360-264126-00-0: RNCC: 5 | RNVC: 2
2360-264126-00-0: RNCC: 5 | RNVC: 2
2360-264126.00.0: RNCC: 5 | RNVC: 2
2360-264126-00-0: RNCC: 5 | RNVC: 9
2360-264126.00.0: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-339-3225
Seal Inserter

123393225
E11.59699-0206: RNCC: 3 | RNVC: 2
596-075: RNCC: 5 | RNVC: 2
596-075: RNCC: 5 | RNVC: 9
E11.59699-0206: RNCC: 5 | RNVC: 9

9 Nov 1995

5120-12-166-1965
Spindel

121661965
8431674: RNCC: 3 | RNVC: 2
8207-635: RNCC: 5 | RNVC: 2

12 Aug 1976

5120-12-387-8201
Seal Inserter

123878201
F30378151: RNCC: 3 | RNVC: 2

1 Feb 2012

5120-12-301-6703
Hand Screw Starter

123016703
4-403: RNCC: 3 | RNVC: 2

1 Nov 1984

5120-12-147-9115
Korneinstellvorrich

121479115
1004W10: RNCC: 2 | RNVC: 2
1004W10: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-157-6780

5120-12-151-6600
Ri Nietvorrichtung

121516600
WKW9008-0107V5: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-123-5948
Socket Wrench Crowfoot Attachment

121235948
NO PRIMARY REF 12-123-5948: RNCC: 3 | RNVC: 2
1950Z1-15-16: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-155-8793
Craftsman's Tweezers

121558793
4240202: RNCC: 3 | RNVC: 2
2135-18: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-390-5979
Carrier Socket

123905979
0889406-5: RNCC: 3 | RNVC: 2
0889406-5: RNCC: 5 | RNVC: 2

27 Nov 2012

5120-12-312-2175
Aligning Punch

123122175
VW385/3: RNCC: 3 | RNVC: 2

4 Dec 1987

5120-12-129-8786
Abziehzange

121298786
1687965009: RNCC: 3 | RNVC: 2
EF3109: RNCC: 5 | RNVC: 2
1687965009: RNCC: 5 | RNVC: 9
EF3109: RNCC: 5 | RNVC: 9
KDAW9995-9: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-307-8690
Drift Pin Set

123078690
2173/2K: RNCC: 3 | RNVC: 2
4498330001: RNCC: 5 | RNVC: 2
58609: RNCC: 5 | RNVC: 2

6 Aug 1986

5120-12-155-8238
Wrench Kit

121558238
6724NM: RNCC: 3 | RNVC: 2
108832: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-389-4500
Torque Wrench

123894500
98 33 25: RNCC: 3 | RNVC: 2
4003773072676: RNCC: 5 | RNVC: 2

9 Jul 2012

5120-12-364-2153
Dreh Haltewerkzeug

123642153
F6558505: RNCC: 3 | RNVC: 2

1 Sep 2004

5120-12-392-1524
Auger Handle

123921524
771135-SET: RNCC: 3 | RNVC: 2

8 May 2013

5120-12-126-2643
Flat Tip Screwdriver

121262643
NO PRIMARY REF 12-126-2643: RNCC: 3 | RNVC: 2
2-5DIN58523: RNCC: 5 | RNVC: 9
DIN58523 2.5: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-189-8175
Torque Wrench Adapter

121898175
2300109-991201.000.0: RNCC: 2 | RNVC: 2
2300109-991201.000.0: RNCC: 3 | RNVC: 2
2300109-991201.000.0: RNCC: 3 | RNVC: 2
5120700046: RNCC: 5 | RNVC: 2
2300109-991201-000-0: RNCC: 5 | RNVC: 2

21 Oct 1981

5120-12-153-7189
Torque Wrench Adapter

121537189
CH2522-20-3FE: RNCC: 3 | RNVC: 2
561589010300: RNCC: 5 | RNVC: 2
5615890103/00: RNCC: 5 | RNVC: 2
CH2522-20-3FE: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-165-0248
Adjustable Wrench

121650248
4440-200: RNCC: 3 | RNVC: 9
2784-200: RNCC: 5 | RNVC: 9
52158-200: RNCC: 5 | RNVC: 9
7000-200: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-700-3746
Socket Wrench

127003746
51-083113004: RNCC: 2 | RNVC: 2
765.93.SB142: RNCC: 5 | RNVC: 2

15 Apr 1992

5120-12-356-8002
Gl Montierwerkzeug

123568002
2300458-690700.000: RNCC: 2 | RNVC: 2
2300548-690700.000: RNCC: 3 | RNVC: 2
9929959: RNCC: 5 | RNVC: 2

8 Apr 2002

5120-12-381-6972
M Indentation Tool

123816972
6530-000: RNCC: 3 | RNVC: 2

18 Mar 2010

5120-12-312-3363
Open End Wrench

123123363
3114-46: RNCC: 3 | RNVC: 2
0014073: RNCC: 5 | RNVC: 2
790015177: RNCC: 5 | RNVC: 2
61280-46: RNCC: 5 | RNVC: 2
612800-46: RNCC: 5 | RNVC: 2
667129: RNCC: 5 | RNVC: 2

17 Dec 1987

5120-12-369-0318
Hand Hammer

123690318
46303: RNCC: 3 | RNVC: 2
00.75.21.52: RNCC: 5 | RNVC: 2

16 May 2006

5120-12-359-0128
Piston Ring Compressor

123590128
063541: RNCC: 3 | RNVC: 2

10 Dec 2002

5120-12-168-3128
Spanner Wrench

121683128
264-620: RNCC: 3 | RNVC: 2
264-620: RNCC: 5 | RNVC: 2

7 Mar 1977

5120-12-359-4956
Blindni Mundstueck

123594956
7202318: RNCC: 3 | RNVC: 2

11 Feb 2003

5120-12-344-4144
Quick Adjusting Screw Clamp

123444144
484 599: RNCC: 3 | RNVC: 2

24 Oct 1997

5120-12-324-1024
Drive Pin Punch

123241024
038.008.0: RNCC: 3 | RNVC: 2
038.008.0-4: RNCC: 5 | RNVC: 2
790514577: RNCC: 5 | RNVC: 2

22 Jan 1991

5120-12-357-2289
Duesenreini Halter

123572289
0986611155: RNCC: 3 | RNVC: 2

23 May 2002

5120-12-334-3804
Open End Wrench

123343804
53.1613.203.11: RNCC: 3 | RNVC: 2

3 May 1994

5120-12-130-3375
Tap And Reamer Extension

121303375
DIN377-6,2: RNCC: 2 | RNVC: 2
83318: RNCC: 3 | RNVC: 2
207108: RNCC: 3 | RNVC: 2
3110-6-2: RNCC: 3 | RNVC: 2
807-6-2: RNCC: 3 | RNVC: 2
6,2DIN377: RNCC: 5 | RNVC: 2
4826-6-2: RNCC: 5 | RNVC: 9
6-2DIN377: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-363-9047
Bearing And Bushing Inserter

123639047
T670P5001259: RNCC: 3 | RNVC: 2

4 Aug 2004

5120-12-373-4388
Lifting Pneumatic Bag

123734388
1314002600: RNCC: 3 | RNVC: 2

5 Nov 2007

5120-12-146-5159

5120-12-194-7806
Torque Wrench

121947806
272.369 549: RNCC: 2 | RNVC: 2
C249-A39-B29: RNCC: 2 | RNVC: 2
1712180145: RNCC: 3 | RNVC: 2
VR2432-1: RNCC: 5 | RNVC: 2
C249-A39-B29: RNCC: 5 | RNVC: 2
282318: RNCC: 5 | RNVC: 2
272.369 549: RNCC: 5 | RNVC: 2
17121 80145: RNCC: 5 | RNVC: 9
5120-01342: RNCC: 6 | RNVC: 9

7 Dec 1982

5120-12-175-2045
Screw Extractor Set

121752045
NO PRIMARY REF 12-175-2045: RNCC: 3 | RNVC: 2
1430-9: RNCC: 5 | RNVC: 9
104072: RNCC: 5 | RNVC: 9

30 Aug 1978

5120-12-123-5280
Open End Box Wrench

121235280
NO PRIMARY REF 12-123-5280: RNCC: 3 | RNVC: 2
105551: RNCC: 5 | RNVC: 9
1949Z9-16X5-8: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-318-3714
Seal Inserter

123183714
V751164: RNCC: 3 | RNVC: 2
4-V751164: RNCC: 5 | RNVC: 2

7 Jul 1989

5120-12-164-6330
Spanner Wrench

121646330
264-254: RNCC: 3 | RNVC: 2
264-254: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-123-5360
Socket Wrench

121235360
DIN659-27: RNCC: 2 | RNVC: 2
27DIN659: RNCC: 3 | RNVC: 2
27DIN659: RNCC: 5 | RNVC: 2
27DIN659GALNI8: RNCC: 5 | RNVC: 9
5168K27: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-339-5966
Hand Blind Riveter

123395966
G-750A: RNCC: 3 | RNVC: 2
G-750A: RNCC: 5 | RNVC: 2
G750: RNCC: 5 | RNVC: 9
G-750: RNCC: 5 | RNVC: 9

11 Dec 1995

5120-12-150-3945
Mechanical Puller

121503945
837589193300: RNCC: 3 | RNVC: 2
8375891933: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-310-5402
Bearing And Bushing Inserter

123105402
80996040039: RNCC: 3 | RNVC: 2
80.99604.0039: RNCC: 5 | RNVC: 2

29 May 1987

5120-12-134-2630
Aufhaengevorrichtun

121342630
062M01400: RNCC: 3 | RNVC: 2
080M00700: RNCC: 5 | RNVC: 2
VM53199: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-305-2541
Rohrbieger Dorn

123052541
5-1/20-035-000-21437: RNCC: 3 | RNVC: 2

15 Oct 1985

5120-12-153-5215
Nm Grundschluessel

121535215
CH1774-3NM: RNCC: 3 | RNVC: 2
8205895007/00: RNCC: 5 | RNVC: 2
820589500700: RNCC: 5 | RNVC: 2
CH1774-3NM: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-300-4863
Elektron Auszieher

123004863
G005/120000.02: RNCC: 3 | RNVC: 2
G005/120000.02: RNCC: 5 | RNVC: 9

7 Aug 1984

5120-12-340-4348
Pliers

123404348
633/125G-BSU: RNCC: 3 | RNVC: 2
633GBSU125MM: RNCC: 5 | RNVC: 2
85-695-4213: RNCC: 6 | RNVC: 9

12 Apr 1996

5120-12-126-1587
Blacksmiths' Tongs

121261587
NO PRIMARY REF 12-126-1587: RNCC: 3 | RNVC: 2
2836-350: RNCC: 5 | RNVC: 9
623B103-350: RNCC: 5 | RNVC: 9
350DIN5171: RNCC: 5 | RNVC: 9
DIN5171-350: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-181-8783
Box Wrench Set

121818783
630/12: RNCC: 3 | RNVC: 2
41980: RNCC: 5 | RNVC: 2
4414300015: RNCC: 5 | RNVC: 2
630-12: RNCC: 5 | RNVC: 2

21 Dec 1979

5120-12-393-8545
Screwdriver Bit

123938545
05059472001: RNCC: 3 | RNVC: 2
800/4Z-0,6X3,5X70: RNCC: 5 | RNVC: 2

16 Oct 2013

5120-12-355-9781
Elektron Auszieher

123559781
184195-15: RNCC: 3 | RNVC: 2

10 Jan 2002

5120-12-369-0481
Mitnehmers Adapter

123690481
KL-0240-1: RNCC: 3 | RNVC: 2

17 May 2006

5120-12-092-2292

5120-12-194-1736
Hyd Einbauwerkzeug

121941736
3S55113-0000: RNCC: 3 | RNVC: 2
MAGERD 1613: RNCC: 5 | RNVC: 9

7 Oct 1982

5120-12-340-8294
Socket Head Screw Key Set

123408294
T440/12AF: RNCC: 3 | RNVC: 2
4400117: RNCC: 5 | RNVC: 2

20 Jun 1996

5120-12-372-0073
Screw Extractor

123720073
701738: RNCC: 3 | RNVC: 2

11 Jun 2007

5120-12-359-3184
Socket Wrench Socket

123593184
0003-0596-320: RNCC: 3 | RNVC: 2

23 Jan 2003

5120-12-123-5001
Open End Wrench

121235001
DIN895-22X24: RNCC: 2 | RNVC: 2
895-22X24: RNCC: 3 | RNVC: 2
K65003: RNCC: 3 | RNVC: 2
8590381102292: RNCC: 5 | RNVC: 2
895-22X24: RNCC: 5 | RNVC: 2
35-02-08: RNCC: 5 | RNVC: 2
22X24DIN895: RNCC: 5 | RNVC: 2
CSN230610-22X24: RNCC: 5 | RNVC: 2
860N0216: RNCC: 5 | RNVC: 9
K65003: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-133-2365
Inserted Hammer Face

121332365
3625NL-22: RNCC: 3 | RNVC: 2
1073831: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-310-1222
Socket Wrench

123101222
DIN3112-18-A: RNCC: 2 | RNVC: 2

8 Apr 1987

5120-12-330-4085
Spanner Wrench

123304085
26-21C1475G001P1: RNCC: 3 | RNVC: 2

11 Dec 1992

5120-12-394-0952
Socket Head Screw Key Set

123940952
05022533001: RNCC: 3 | RNVC: 2
950SPKL/7B SM: RNCC: 5 | RNVC: 2

5 Nov 2013

5120-12-154-9369
Flat Tip Screwdriver

121549369
TL5180-0202-2: RNCC: 2 | RNVC: 2
206-5: RNCC: 5 | RNVC: 9
1-6X8DIN5266S: RNCC: 5 | RNVC: 9
1-6XDIN5266SGALNI5: RNCC: 5 | RNVC: 9
DIN5266-1,6X8S: RNCC: 5 | RNVC: 9
5180-0202-2: RNCC: 5 | RNVC: 9
5180-202-2: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-330-9182
Torque Wrench

123309182
74Z-0-0-80: RNCC: 3 | RNVC: 2
88-2008: RNCC: 5 | RNVC: 9

25 Feb 1993

5120-12-365-0100
Flat Tip Screwdriver

123650100
4-603: RNCC: 3 | RNVC: 2

23 Nov 2004

5120-12-311-1824
Mechanical Puller

123111824
000589163300: RNCC: 3 | RNVC: 2

4 Aug 1987

5120-12-349-9193
Mechanical Puller

123499193
45.004.50.775: RNCC: 3 | RNVC: 2

26 Jan 2000

5120-12-390-1337
Socket Wrench Set

123901337
54.0167.056.00: RNCC: 3 | RNVC: 2
83143720: RNCC: 5 | RNVC: 2
14100089490: RNCC: 5 | RNVC: 2

9 Oct 2012

5120-12-335-3150
Schluesseleinsatz

123353150
0852 5024: RNCC: 3 | RNVC: 2
8525024: RNCC: 5 | RNVC: 2

9 Aug 1994

5120-12-120-5709

5120-12-140-2228

5120-12-123-5506

5120-12-322-0119
Mechanical Puller

123220119
844603449: RNCC: 3 | RNVC: 2

17 Jul 1990

5120-12-186-8584
Beladevorrichtung

121868584
4900169: RNCC: 2 | RNVC: 2

11 Feb 1981

5120-12-362-8542
Auswechs Klemmteil

123628542
110110: RNCC: 3 | RNVC: 2

7 Apr 2004

5120-12-126-2241
Pliers

121262241
TL5180-0085-58: RNCC: 2 | RNVC: 2
2216-290: RNCC: 3 | RNVC: 2
55: RNCC: 5 | RNVC: 9
5180-085-58: RNCC: 5 | RNVC: 9
5180-0085-58: RNCC: 5 | RNVC: 9
636D402: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-386-7968
Mechanical Puller

123867968
SZF-705-2E-065: RNCC: 2 | RNVC: 2
SZF-705-2E-065: RNCC: 3 | RNVC: 2

4 Oct 2011

5120-12-150-2743
Spanner Wrench

121502743
23176-264460-00-0: RNCC: 2 | RNVC: 2
23176-264460.00.0: RNCC: 2 | RNVC: 2
23176-264460-00-0: RNCC: 5 | RNVC: 2
23176-264460.00.0: RNCC: 5 | RNVC: 2
23176-264460-00-0: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-139-7591
Spanner Wrench

121397591
3125890007: RNCC: 3 | RNVC: 2
312589000700: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-149-8023
Ueberlaufbehaelter

121498023
8375891863: RNCC: 3 | RNVC: 2
837589186300: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-390-2073
Bearing And Bushing Inserter

123902073
F30370048: RNCC: 3 | RNVC: 2

17 Oct 2012

5120-12-181-7092
Auflage

121817092
264-606: RNCC: 3 | RNVC: 2

12 Dec 1979

5120-12-384-7934
Socket Head Screw Key

123847934
F30375104: RNCC: 3 | RNVC: 2

29 Mar 2011

5120-12-390-5669
Seal Installation Tool

123905669
7125297: RNCC: 3 | RNVC: 2

23 Nov 2012

5120-12-381-5531
Socket Wrench

123815531
05029502001: RNCC: 3 | RNVC: 2
395HO-1/4: RNCC: 5 | RNVC: 2

3 Mar 2010

5120-12-126-5415
Socket Wrench

121265415
NO PRIMARY REF 12-126-5415: RNCC: 3 | RNVC: 2
0005810067: RNCC: 5 | RNVC: 2
0005810667: RNCC: 5 | RNVC: 2
08280: RNCC: 5 | RNVC: 2
767: RNCC: 5 | RNVC: 9
0005810067: RNCC: 5 | RNVC: 9
767: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-144-0633
Einstell- Dorn

121440633
2895-029: RNCC: 3 | RNVC: 2
2895029: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-340-7471
Electrical Contact Inserter

123407471
280-432: RNCC: 3 | RNVC: 2
280432: RNCC: 5 | RNVC: 2
101-3669: RNCC: 5 | RNVC: 2

4 Jun 1996

5120-12-176-2819
Bearing And Bushing Inserter

121762819
23290-268000-001: RNCC: 2 | RNVC: 2
23290-268000.001: RNCC: 2 | RNVC: 2

23 Nov 1978

5120-12-342-8262
We Montierwerkzeug

123428262
462-268730.000: RNCC: 3 | RNVC: 9
462-268730.000: RNCC: 5 | RNVC: 2

8 Apr 1997

5120-12-195-6672
Electronic Equipment Alignment Tool

121956672
C407-Z4-C56: RNCC: 3 | RNVC: 2

24 Mar 1983

5120-12-390-4222
Bearing And Bushing Remover

123904222
5805891633/00: RNCC: 3 | RNVC: 2

12 Nov 2012

5120-12-379-0115
Spanner Wrench

123790115
4100022-260000.001.0: RNCC: 2 | RNVC: 2
4100022-260000.001.0: RNCC: 3 | RNVC: 2
4100022-260000.001.0: RNCC: 5 | RNVC: 9

15 Jun 2009

5120-12-393-2896
Socket Wrench Crowfoot Attachment

123932896
SEWZG031: RNCC: 3 | RNVC: 2

4 Sep 2013

5120-12-354-3823
Flat Tip Screwdriver Set

123543823
W00029: RNCC: 3 | RNVC: 2
66071-7: RNCC: 5 | RNVC: 2

5 Jul 2001

5120-12-373-4048
Flat Tip Screwdriver

123734048
379-6: RNCC: 3 | RNVC: 2

30 Oct 2007

5120-12-363-8719
Bearing And Bushing Inserter

123638719
T670P5001212: RNCC: 3 | RNVC: 2

31 Jul 2004

5120-12-378-6550
Oil Filter Wrench

123786550
187-280: RNCC: 3 | RNVC: 2
00.40.05.28: RNCC: 5 | RNVC: 2

29 Apr 2009

5120-12-194-0821
Torque Wrench Adapter

121940821
TL5120-0086-180: RNCC: 2 | RNVC: 2
7112-5/8AF: RNCC: 5 | RNVC: 2
20/DC-5/8: RNCC: 5 | RNVC: 9
1547321: RNCC: 5 | RNVC: 9
58611036: RNCC: 5 | RNVC: 9
731A/10 5/8: RNCC: 5 | RNVC: 9

29 Sep 1982

5120-12-369-0026
Screwdriver Bit

123690026
IS19- 6.5X1.2: RNCC: 3 | RNVC: 2
00.50.06.59: RNCC: 5 | RNVC: 2
6161760: RNCC: 5 | RNVC: 2

11 May 2006

5120-12-322-2822
Torque Wrench

123222822
EM-CAL-36/4: RNCC: 3 | RNVC: 2
52220040: RNCC: 3 | RNVC: 2

8 Aug 1990

5120-12-324-4469
Blind Nietzugstift

123244469
349047: RNCC: 3 | RNVC: 2

18 Feb 1991

5120-12-374-3929
Torque Wrench Adapter

123743929
58221019-TCS: RNCC: 3 | RNVC: 2

13 Feb 2008

5120-12-150-4475
Sperrvorrichtung

121504475
838589006300: RNCC: 3 | RNVC: 2
8385890063: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-137-3412
Box Wrench

121373412
NO PRIMARY REF 12-137-3412: RNCC: 3 | RNVC: 2
1300Z3-4X25-32: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-132-1661
Socket Wrench

121321661
25-27: RNCC: 3 | RNVC: 2
91A-27-CR: RNCC: 5 | RNVC: 9
075095: RNCC: 5 | RNVC: 9
75-27: RNCC: 5 | RNVC: 9
211605: RNCC: 5 | RNVC: 9
25-27: RNCC: 5 | RNVC: 9
1834807: RNCC: 5 | RNVC: 9
25-27: RNCC: 5 | RNVC: 9
28M-27: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-317-6324
Seal Inserter

123176324
7673798053: RNCC: 3 | RNVC: 2
7673 798 053: RNCC: 5 | RNVC: 9

25 Apr 1989

5120-12-340-2914
Schluesseleinsatz

123402914
31VR17: RNCC: 3 | RNVC: 2
626 236: RNCC: 5 | RNVC: 2

21 Mar 1996

5120-12-363-1503
Nietzugst Fuehrung

123631503
7202601: RNCC: 3 | RNVC: 2

6 May 2004

5120-12-333-6231
Dreh Haltewerkzeug

123336231
602589004000: RNCC: 3 | RNVC: 2

13 Jan 1994

5120-12-325-7408
Spanner Wrench

123257408
4W3235-A: RNCC: 3 | RNVC: 2
4W3235-A: RNCC: 5 | RNVC: 9

4 Jul 1991

5120-12-320-6266
Mechanical Puller Attachment

123206266
1970-2: RNCC: 3 | RNVC: 2
12721: RNCC: 3 | RNVC: 2
74460002: RNCC: 5 | RNVC: 2
5798760003: RNCC: 5 | RNVC: 2

1 Feb 1990

5120-12-150-3927
We Haltevorrichtung

121503927
1X46914933: RNCC: 3 | RNVC: 2
V91493-3: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-374-4389
Spatula

123744389
8/PR12: RNCC: 3 | RNVC: 2
02.33.26.46: RNCC: 5 | RNVC: 2

18 Feb 2008

5120-12-331-0698
Rohr- Zange

123310698
180905: RNCC: 3 | RNVC: 9
1074-11/2: RNCC: 5 | RNVC: 2

18 Mar 1993

5120-12-157-3532
Socket Wrench Handle

121573532
50-07: RNCC: 3 | RNVC: 2
1996: RNCC: 3 | RNVC: 2
504-10IN: RNCC: 3 | RNVC: 2
22/LTT 237 03: RNCC: 5 | RNVC: 1
8/LTT 237 23: RNCC: 5 | RNVC: 1
13060001: RNCC: 5 | RNVC: 2
6144830: RNCC: 5 | RNVC: 2
00500700: RNCC: 5 | RNVC: 2
614483: RNCC: 5 | RNVC: 9
1306001: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-190-2868
Open End Wrench

121902868
1406504: RNCC: 3 | RNVC: 2
5120700058: RNCC: 5 | RNVC: 2
1406504-3: RNCC: 5 | RNVC: 9
1406504/3: RNCC: 5 | RNVC: 9

17 Nov 1981

5120-12-330-9664
Socket Wrench Socket

123309664
771-S19: RNCC: 3 | RNVC: 2
32-19: RNCC: 3 | RNVC: 2
1000-19: RNCC: 3 | RNVC: 2
2389110001: RNCC: 5 | RNVC: 2
00.51.65.24: RNCC: 5 | RNVC: 2
480/7345-14-00-00/3: RNCC: 5 | RNVC: 9

4 Mar 1993

5120-12-164-7982
Spanner Wrench

121647982
90.9-11: RNCC: 3 | RNVC: 2
90-9-11: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-126-3142
Serving Mallet

121263142
5120-0026-B: RNCC: 2 | RNVC: 2
5120-026ITEMB: RNCC: 5 | RNVC: 9
5120-0026ITEMB: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-123-5679
Socket Wrench Socket

121235679
NO PRIMARY REF 12-123-5679: RNCC: 3 | RNVC: 2
109761: RNCC: 5 | RNVC: 9
7800DZ1 3-8: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-345-9995
Hydraulic Jack Handle

123459995
NO PRIMARY REF 12-345-9995: RNCC: 3 | RNVC: 2
81668070040: RNCC: 5 | RNVC: 2
0107/4: RNCC: 5 | RNVC: 2

28 May 1998

5120-12-120-5197
Open End Wrench

121205197
6-10X14: RNCC: 3 | RNVC: 2
0276006000: RNCC: 5 | RNVC: 2
8797950502: RNCC: 5 | RNVC: 9
WZ17D8Q: RNCC: 5 | RNVC: 9
410902208: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-385-2652
Torque Wrench

123852652
4550-00: RNCC: 3 | RNVC: 9

16 May 2011

5120-12-353-4475
An Montierwerkzeug

123534475
S27013/01-4-2-9-1: RNCC: 3 | RNVC: 2

26 Mar 2001

5120-12-365-0114
Socket Wrench

123650114
6-619: RNCC: 3 | RNVC: 2

23 Nov 2004

5120-12-023-1449

5120-12-363-8702
C Clamp

123638702
T670P5001102: RNCC: 3 | RNVC: 2

31 Jul 2004

5120-12-385-6198
Mechanical Puller

123856198
Y4275534: RNCC: 3 | RNVC: 2

22 Jun 2011

5120-12-346-9009
Socket Wrench Socket

123469009
F30277263: RNCC: 3 | RNVC: 2

23 Sep 1998

5120-12-346-4361
Socket Wrench Socket

123464361
80996030095: RNCC: 3 | RNVC: 2

27 Jul 1998

5120-12-390-0211
Mounting Punch

123900211
KV2004: RNCC: 3 | RNVC: 2

25 Sep 2012

5120-12-306-8787
Spanner Wrench Handle

123068787
830075005: RNCC: 3 | RNVC: 2

14 Apr 1986

5120-12-361-1956
Boerdelwer Einsatz

123611956
80996250028: RNCC: 3 | RNVC: 2
80.99625-0028: RNCC: 5 | RNVC: 2

2 Sep 2003

5120-12-333-6434
Socket Wrench

123336434
340-30X32: RNCC: 3 | RNVC: 2
91-220: RNCC: 3 | RNVC: 2
27-30X32: RNCC: 3 | RNVC: 2
03400007: RNCC: 5 | RNVC: 2
81.66807-0042: RNCC: 5 | RNVC: 2
622591: RNCC: 5 | RNVC: 2
81668070042: RNCC: 5 | RNVC: 9

17 Jan 1994

5120-12-173-0327
Box Wrench

121730327
806126-0000007: RNCC: 3 | RNVC: 2
806126-0000.007: RNCC: 5 | RNVC: 2

15 Mar 1978

5120-12-173-5674
Spanner Wrench

121735674
009-516.140-000: RNCC: 2 | RNVC: 2
5223-140: RNCC: 2 | RNVC: 2
009-516.140-000: RNCC: 3 | RNVC: 2
09-516-140: RNCC: 5 | RNVC: 2
5223-140: RNCC: 5 | RNVC: 2
009-516-140: RNCC: 5 | RNVC: 2
5223-140: RNCC: 5 | RNVC: 9

24 Apr 1978

5120-12-177-2188
Socket Wrench Socket

121772188
A7400DZ-1/4: RNCC: 3 | RNVC: 2
D30-1-4AF: RNCC: 3 | RNVC: 2
45A1-4: RNCC: 3 | RNVC: 2
02410016: RNCC: 5 | RNVC: 2
1759193: RNCC: 5 | RNVC: 2
180856: RNCC: 5 | RNVC: 9
7400DZ-1/4: RNCC: 5 | RNVC: 9

19 Jan 1979

5120-12-368-6540
Socket Wrench Socket

123686540
1455-A5/32: RNCC: 3 | RNVC: 2
00.43.72.07: RNCC: 5 | RNVC: 2

4 Apr 2006

5120-12-386-1379
Mechanical Puller

123861379
71140212: RNCC: 3 | RNVC: 2
0921885: RNCC: 5 | RNVC: 2

10 Aug 2011

5120-12-368-7477
Socket Wrench Screwdriver Attachment

123687477
3530-XZNL 8X93: RNCC: 3 | RNVC: 2
00.47.58.05: RNCC: 5 | RNVC: 2

12 Apr 2006

5120-12-327-8466
Socket Wrench Socket

123278466
A6710DZ-1/4: RNCC: 3 | RNVC: 2
175722: RNCC: 5 | RNVC: 2
402A-1/4: RNCC: 5 | RNVC: 2

12 Mar 1992

5120-12-319-8203
Spanner Wrench

123198203
892-4: RNCC: 3 | RNVC: 2
628600-4: RNCC: 3 | RNVC: 2
62860-4: RNCC: 5 | RNVC: 2

8 Nov 1989

5120-12-171-1944
Montagewerkzeug

121711944
80.99606-0004: RNCC: 3 | RNVC: 2
80996060004: RNCC: 3 | RNVC: 2

16 Sep 1977

5120-12-021-3533

5120-12-368-7980
Socket Wrench Socket

123687980
770-LT11: RNCC: 3 | RNVC: 2
00.49.01.51: RNCC: 5 | RNVC: 2

21 Apr 2006

5120-12-164-7696
Screw Extractor Set

121647696
160/1-8: RNCC: 3 | RNVC: 2
55000180: RNCC: 3 | RNVC: 2
5118: RNCC: 5 | RNVC: 2
104074: RNCC: 5 | RNVC: 2
01.42.52.90: RNCC: 5 | RNVC: 2
1435-8: RNCC: 5 | RNVC: 2
263 000 3: RNCC: 5 | RNVC: 2
1435-9: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-164-8071
Offset Screwdriver

121648071
NO PRIMARY REF 12-164-8071: RNCC: 3 | RNVC: 2
106051: RNCC: 5 | RNVC: 9
2047-17: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-314-5262
Piston Inserter

123145262
F11.49021-0259: RNCC: 3 | RNVC: 2
11.49021-0259: RNCC: 5 | RNVC: 2
11.49021-0259: RNCC: 5 | RNVC: 2

15 Jul 1988

5120-12-133-6175
Socket Wrench

121336175
680-181: RNCC: 3 | RNVC: 2
S505-65-160: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-131-4923
Socket Wrench

121314923
2876014000: RNCC: 3 | RNVC: 2
S002876014000000: RNCC: 5 | RNVC: 2
2876 014 000: RNCC: 5 | RNVC: 2
WN9: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-310-2754
Socket Wrench

123102754
120410: RNCC: 3 | RNVC: 2

4 May 1987

5120-12-312-3362
Open End Wrench

123123362
612800-41: RNCC: 3 | RNVC: 2
3114-41: RNCC: 3 | RNVC: 2
790015077: RNCC: 5 | RNVC: 2
667110: RNCC: 5 | RNVC: 2
0014072: RNCC: 5 | RNVC: 2
61280-41: RNCC: 5 | RNVC: 9

17 Dec 1987

5120-12-123-5656
Combination Box And Open End Wrench

121235656
1952Z-1.7/16: RNCC: 3 | RNVC: 2
1B-1.7/16AF: RNCC: 3 | RNVC: 2
14A1 7-16: RNCC: 3 | RNVC: 2
1952Z1 7-16: RNCC: 5 | RNVC: 2
600717: RNCC: 5 | RNVC: 2
105766: RNCC: 5 | RNVC: 2
1057749: RNCC: 5 | RNVC: 2
40506262: RNCC: 5 | RNVC: 2
179963: RNCC: 5 | RNVC: 9
1952C-Z1 7/16: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-041-2680

5120-12-391-7166
Mechanical Puller Adapter

123917166
80996060534: RNCC: 3 | RNVC: 2
80.99606-0534: RNCC: 5 | RNVC: 2

28 Mar 2013

5120-12-133-3606
Schluessel

121333606
185-181: RNCC: 3 | RNVC: 2
S533E11: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-192-4377
Screwdriver Bit

121924377
CH1778/6: RNCC: 3 | RNVC: 2
590589001100: RNCC: 5 | RNVC: 2
590589001100: RNCC: 5 | RNVC: 2
5905890011/00: RNCC: 5 | RNVC: 2
590589001100: RNCC: 5 | RNVC: 2
CH1778/6: RNCC: 5 | RNVC: 9
CK1778/6: RNCC: 5 | RNVC: 9

26 Apr 1982

5120-12-352-4254
Drive Pin Punch

123524254
5600023-990000.004.0: RNCC: 2 | RNVC: 2
5600023-990000.004.0: RNCC: 3 | RNVC: 2

17 Nov 2000

5120-12-167-1149
Gegenhalter

121671149
14021-12002W3: RNCC: 3 | RNVC: 2

23 Nov 1976

5120-12-151-6683
Ratchet Wrench

121516683
31-353-016-1: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-156-1008
Spreizdorn

121561008
25704-360810.00.0: RNCC: 2 | RNVC: 2
03130: RNCC: 3 | RNVC: 2
25704-360810.00.0: RNCC: 3 | RNVC: 2
25704-360810-00-0: RNCC: 5 | RNVC: 2
25704-360810-00-0: RNCC: 5 | RNVC: 9
25704-360810.00.0: RNCC: 5 | RNVC: 9
03130: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-388-5157
Hose Remover

123885157
G451652: RNCC: 3 | RNVC: 2
903589016300: RNCC: 5 | RNVC: 2

28 Mar 2012

5120-12-311-3351
Spanner Wrench

123113351
01TC34932: RNCC: 3 | RNVC: 2

19 Aug 1987

5120-12-181-1575
Screwdriver Bit

121811575
1094-3: RNCC: 3 | RNVC: 2

29 Oct 1979

5120-12-092-3874

5120-12-130-7069
Pipe Wrench

121307069
210-2: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-121-1303
Socket Wrench

121211303
111012235: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-327-2196
Torque Wrench

123272196
52249-090UND52254010: RNCC: 3 | RNVC: 2
R810784UND R819057: RNCC: 5 | RNVC: 2
52249-090UND52250-080: RNCC: 5 | RNVC: 9
5120123263091UND5120123263090: RNCC: 5 | RNVC: 9
5120-01570: RNCC: 6 | RNVC: 9

17 Dec 1991

5120-12-144-5042
Screwdriver Bit

121445042
NO PRIMARY REF 12-144-5042: RNCC: 3 | RNVC: 2
73-2: RNCC: 5 | RNVC: 9
114708: RNCC: 5 | RNVC: 9
7084B: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-316-3070
Socket Head Screw Key Blade

123163070
9920BP: RNCC: 3 | RNVC: 2
42520100: RNCC: 3 | RNVC: 9
99-20BP: RNCC: 5 | RNVC: 9

9 Jan 1989

5120-12-157-6785
Kabelschuh Stempel

121576785
N50-70WHK5: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-174-0575
Montagevorrichtung

121740575
2300002-261320.000: RNCC: 2 | RNVC: 2
2300002-261320.000: RNCC: 3 | RNVC: 2
2300002-261320: RNCC: 5 | RNVC: 9

6 Jun 1978

5120-12-186-7355
Auswechselwe Griff

121867355
NO PRIMARY REF 12-186-7355: RNCC: 3 | RNVC: 2
A370005: RNCC: 5 | RNVC: 2
A370005: RNCC: 5 | RNVC: 9

2 Feb 1981

5120-12-335-4915
Inserted Hammer Face

123354915
TL5120-0126-A110: RNCC: 2 | RNVC: 2
3209050: RNCC: 3 | RNVC: 2
51235050: RNCC: 5 | RNVC: 9

23 Aug 1994

5120-12-123-5060
Open End Wrench

121235060
M12401: RNCC: 3 | RNVC: 2
M12401: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-344-0990
Socket Wrench Socket

123440990
0851 6691: RNCC: 3 | RNVC: 2
8516691: RNCC: 5 | RNVC: 2

11 Sep 1997

5120-12-129-5568
Screwdriver Bit

121295568
600S8: RNCC: 3 | RNVC: 2
8503-1,2X8: RNCC: 3 | RNVC: 2
2485140006: RNCC: 5 | RNVC: 2
58074100: RNCC: 5 | RNVC: 9
54770: RNCC: 5 | RNVC: 9
8503-7: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-177-1824
Box Wrench

121771824
2360-261001.00.0: RNCC: 2 | RNVC: 2
2360-261001.00.0: RNCC: 3 | RNVC: 2
2360-261001.00.0: RNCC: 5 | RNVC: 2
5120700033: RNCC: 5 | RNVC: 2
2360-261001-00-0: RNCC: 5 | RNVC: 2
2360-261001-00-0: RNCC: 5 | RNVC: 2
2360-261001.00.0: RNCC: 5 | RNVC: 2
2360-261001-00-0: RNCC: 5 | RNVC: 9
2360-261001.00.0: RNCC: 5 | RNVC: 9

17 Jan 1979

5120-12-305-2534
Rohrbieger Dorn

123052534
5-3/80-020-000-21426: RNCC: 3 | RNVC: 2

15 Oct 1985

5120-12-383-8274
C Clamp

123838274
1800180C: RNCC: 3 | RNVC: 2

10 Dec 2010

5120-12-359-9795
W Spannvorrichtung

123599795
204759: RNCC: 3 | RNVC: 2

26 Mar 2003

5120-12-392-9071
Adjustable Wrench

123929071
8072 C: RNCC: 3 | RNVC: 2

22 Jul 2013

5120-12-305-8814
Bearing And Bushing Inserter

123058814
4900059-752025.000.0: RNCC: 2 | RNVC: 2
4900059-752025.000.0: RNCC: 3 | RNVC: 2

30 Dec 1985

5120-12-382-7604
Slee Mounting Tool

123827604
00826488: RNCC: 3 | RNVC: 2
4046356426350: RNCC: 5 | RNVC: 2

5 Aug 2010

5120-12-140-4759
Combination Box And Open End Wrench

121404759
LG144007: RNCC: 3 | RNVC: 2
WZ47: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-356-7425
Eindrueckwerkzeug

123567425
126-20: RNCC: 3 | RNVC: 2

28 Mar 2002

5120-12-305-4316
Sc Abklemmwerkzeug

123054316
S82-24: RNCC: 3 | RNVC: 2
3094: RNCC: 5 | RNVC: 2
3094: RNCC: 5 | RNVC: 2
VW003094: RNCC: 5 | RNVC: 2

5 Nov 1985

5120-12-369-8820
Socket Wrench Crowfoot Attachment

123698820
440-18: RNCC: 3 | RNVC: 2
02190018: RNCC: 5 | RNVC: 2

23 Aug 2006

5120-12-172-3929
Socket Wrench Extension

121723929
30-79350-0210: RNCC: 3 | RNVC: 2

19 Jan 1978

5120-12-315-2904
Bearing And Bushing Inserter And Remover

123152904
5505890190/00: RNCC: 3 | RNVC: 2
5505890190/00: RNCC: 5 | RNVC: 2
5505890190/00: RNCC: 5 | RNVC: 2
550589019000: RNCC: 5 | RNVC: 9

11 Oct 1988

5120-12-123-5092
Open End Wrench

121235092
NO PRIMARY REF 12-123-5092: RNCC: 3 | RNVC: 2
105043: RNCC: 5 | RNVC: 9
1932WM7X8: RNCC: 5 | RNVC: 9
00680: RNCC: 5 | RNVC: 9
1203110007: RNCC: 5 | RNVC: 9
330-7X8: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-156-1532
Drive Pin Punch

121561532
NM350-15: RNCC: 3 | RNVC: 2
NM350-15: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-121-5595
Blacksmith's Punch

121215595
DIN5253-B10S: RNCC: 2 | RNVC: 2
26-10: RNCC: 3 | RNVC: 2
5057-02-10: RNCC: 5 | RNVC: 2
B10SDIN5253: RNCC: 5 | RNVC: 2
5057ES10: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-185-5514
Inserted Hammer Face

121855514
TL5120-0126-A105: RNCC: 2 | RNVC: 2
3207125: RNCC: 3 | RNVC: 2

14 Oct 1980

5120-12-388-8145
Stru Mounting Tool

123888145
5109025: RNCC: 2 | RNVC: 2
5109025: RNCC: 3 | RNVC: 2

25 Apr 2012

5120-12-181-9548
Spanner Wrench

121819548
01TC31018: RNCC: 3 | RNVC: 2

28 Dec 1979

5120-12-137-1367
Open End Wrench

121371367
U01241: RNCC: 3 | RNVC: 2
36-685: RNCC: 3 | RNVC: 2
U1241: RNCC: 5 | RNVC: 2
U01241: RNCC: 5 | RNVC: 9
U1241: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-193-9917
Socket Wrench

121939917
3095810046: RNCC: 3 | RNVC: 2
4605810146: RNCC: 3 | RNVC: 2
6015810046: RNCC: 3 | RNVC: 2

22 Sep 1982

5120-12-141-3638
Mechanical Puller

121413638
WU38A: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-364-5674
Open End Wrench

123645674
40031819-TCS: RNCC: 3 | RNVC: 2

9 Oct 2004

5120-12-368-1106
Cross Tip Screwdriver

123681106
47341002-TCS: RNCC: 3 | RNVC: 2

8 Dec 2005

5120-12-364-5642
Open End Wrench

123645642
40060606-TCS: RNCC: 3 | RNVC: 2

9 Oct 2004

5120-12-351-6988
Mechanical Finger

123516988
081450-170: RNCC: 3 | RNVC: 2
67910170: RNCC: 5 | RNVC: 9

16 Aug 2000

5120-12-133-3208
Splicing Sleeve Compressing Tool

121333208
05526: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-339-4921
Schluessel

123394921
M612243: RNCC: 3 | RNVC: 9

28 Nov 1995

5120-12-199-2108

5120-12-330-9515
Swivel Knob Jeweler's Screwdriver

123309515
DIN8320-A0,25X1,2: RNCC: 2 | RNVC: 2
TVA5120-2-263-039-1.1.6: RNCC: 5 | RNVC: 2

2 Mar 1993

5120-12-377-3402
Socket Wrench Extension

123773402
509/5W: RNCC: 3 | RNVC: 2
6173180: RNCC: 3 | RNVC: 2
1990 KR-5: RNCC: 5 | RNVC: 2
6173180: RNCC: 5 | RNVC: 2
58857030: RNCC: 5 | RNVC: 2
F30501567: RNCC: 5 | RNVC: 2
13010007: RNCC: 5 | RNVC: 2
509W-5: RNCC: 5 | RNVC: 2
1990 KR-5: RNCC: 5 | RNVC: 2
4010886803806: RNCC: 5 | RNVC: 2

12 Jan 2009

5120-12-353-1128
Digging Pick

123531128
B1228-10: RNCC: 3 | RNVC: 2
B1228-10: RNCC: 5 | RNVC: 2

29 Jan 2001

5120-12-155-8240
Drive Pin Punch

121558240
3644-110: RNCC: 3 | RNVC: 2
107470: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-362-5501
Mechanical Puller

123625501
124 589 03 33 00: RNCC: 3 | RNVC: 2

6 Mar 2004

5120-12-333-6701
Blindni Mundstueck

123336701
91718: RNCC: 3 | RNVC: 2
917 18: RNCC: 5 | RNVC: 2

20 Jan 1994

5120-12-330-9242
Jack Elevating Block

123309242
4615830080: RNCC: 3 | RNVC: 2

25 Feb 1993

5120-12-331-6059
Sp Montierwerkzeug

123316059
80996066008: RNCC: 3 | RNVC: 2
V1055: RNCC: 5 | RNVC: 2
80.99606.6008: RNCC: 5 | RNVC: 2

27 May 1993

5120-12-337-5483
Bearing And Bushing Inserter

123375483
62755300: RNCC: 3 | RNVC: 2

10 Mar 1995

5120-12-332-6024
Pa Montierwerkzeug

123326024
962193: RNCC: 3 | RNVC: 2
329890: RNCC: 5 | RNVC: 2
962 193: RNCC: 5 | RNVC: 2

26 Aug 1993

5120-12-126-1571

5120-12-321-4467
Combination Box And Open End Wrench

123214467
54.0062.820.06: RNCC: 3 | RNVC: 2

21 May 1990

5120-12-348-6476
Torque Wrench Adapter

123486476
8791-17: RNCC: 3 | RNVC: 2

29 Jul 1999

5120-12-150-7595
Spanner Wrench Set

121507595
510280: RNCC: 2 | RNVC: 2
JB168-00T0100: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-307-3764
Grommet Inserting Punch And Die

123073764
1622607: RNCC: 3 | RNVC: 2
15B-26X7: RNCC: 5 | RNVC: 9
3493: RNCC: 5 | RNVC: 9

10 Jun 1986

5120-12-385-3171
Mecha Ejector Tool

123853171
11.49058-0657: RNCC: 3 | RNVC: 2
021.526: RNCC: 5 | RNVC: 2

23 May 2011

5120-12-181-8427
Hand Screw Starter

121818427
2784-3.5: RNCC: 3 | RNVC: 2
52725020: RNCC: 3 | RNVC: 9
2784-3-5: RNCC: 3 | RNVC: 9

19 Dec 1979

5120-12-167-9278
Socket Wrench Screwdriver Attachment

121679278
GTMA6E: RNCC: 3 | RNVC: 2
3210-IN 3/16: RNCC: 3 | RNVC: 2
44A-3/16: RNCC: 3 | RNVC: 2
999/4/42556/469: RNCC: 5 | RNVC: 1
01450012: RNCC: 5 | RNVC: 2
00.49.82.35: RNCC: 5 | RNVC: 2
01 45 00 12: RNCC: 5 | RNVC: 9
44A3-16INCH: RNCC: 5 | RNVC: 9

7 Feb 1977

5120-12-191-4110
Box Wrench

121914110
03.339.05.01.0: RNCC: 3 | RNVC: 2
D-03.339.05.01.0: RNCC: 3 | RNVC: 2
8.454.608.000: RNCC: 5 | RNVC: 2

1 Feb 1982

5120-12-173-1064
Dorn

121731064
VG95211-ML-121731064: RNCC: 2 | RNVC: 2
1X56 136 694: RNCC: 3 | RNVC: 2
1X56136694: RNCC: 5 | RNVC: 9

20 Mar 1978

5120-12-177-6265
Spanner Wrench

121776265
UHG302-25: RNCC: 3 | RNVC: 2
UHG302-25: RNCC: 5 | RNVC: 9

9 Feb 1979

5120-12-306-7571
Seal Inserter

123067571
7882851: RNCC: 3 | RNVC: 2
1000025-850000.11: RNCC: 5 | RNVC: 2
7882-851: RNCC: 5 | RNVC: 2

27 Mar 1986

5120-12-346-1080
Schluessel

123461080
5195014-100: RNCC: 3 | RNVC: 2

15 Jun 1998

5120-12-368-1032
Offset Screwdriver

123681032
73282034-TCS: RNCC: 3 | RNVC: 2

7 Dec 2005

5120-12-195-1237
Ausdrueckwerkzeug

121951237
7428798201: RNCC: 3 | RNVC: 2
7428798201: RNCC: 5 | RNVC: 9

13 Jan 1983

5120-12-366-0344
Hand Hydraulic Jack

123660344
305.092.0: RNCC: 3 | RNVC: 2
ATP12-230: RNCC: 5 | RNVC: 2
0015830715: RNCC: 5 | RNVC: 2

2 Mar 2005

5120-12-305-8084
Seal Inserter

123058084
TK-BA35-5120-464: RNCC: 2 | RNVC: 2
211-112.6001.4: RNCC: 3 | RNVC: 2
211-112.6001.4: RNCC: 5 | RNVC: 9

17 Dec 1985

5120-12-306-4392
Combination Box And Open End Wrench

123064392
JD5120-12-306-4392: RNCC: 3 | RNVC: 2
61830600: RNCC: 5 | RNVC: 9
61830600.294: RNCC: 5 | RNVC: 9
0705150390: RNCC: 5 | RNVC: 9

28 Feb 1986

5120-12-123-5808
Socket Wrench Socket

121235808
NO PRIMARY REF 12-123-5808: RNCC: 3 | RNVC: 2
TVA5120-2-263-027: RNCC: 5 | RNVC: 1
TVA5120-2-263-027/1.1.62: RNCC: 5 | RNVC: 2
110717: RNCC: 5 | RNVC: 9
9500DZ1 3-4: RNCC: 5 | RNVC: 9
06410068: RNCC: 5 | RNVC: 9
60A1 3-4: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-337-5572
Plug Electrical Connector Extractor

123375572
62905500: RNCC: 3 | RNVC: 2

13 Mar 1995

5120-12-142-0287
Adjustable Wrench

121420287
41609: RNCC: 3 | RNVC: 2
571J201-75: RNCC: 3 | RNVC: 2
593-370: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-120-4960
Hand Vise

121204960
TL5120-0098-020: RNCC: 2 | RNVC: 2
500-120: RNCC: 3 | RNVC: 2
101120: RNCC: 3 | RNVC: 2
51016120: RNCC: 5 | RNVC: 9
576D009-120: RNCC: 5 | RNVC: 9
TK-KG55-5120-302-020: RNCC: 5 | RNVC: 9
TK5120-302-020: RNCC: 5 | RNVC: 9
S4-6804-28: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-166-2599
Spanner Wrench

121662599
DIN1810-B20-22: RNCC: 2 | RNVC: 2
B20-22DIN1810: RNCC: 5 | RNVC: 2
DIN1810B20-22: RNCC: 5 | RNVC: 9

19 Aug 1976

5120-12-380-5196
Socket Wrench Socket

123805196
1878256893: RNCC: 3 | RNVC: 2

5 Nov 2009

5120-12-385-5245
Pneumatic Tire Valve Repair Tool

123855245
5628061: RNCC: 3 | RNVC: 2

10 Jun 2011

5120-12-368-8203
Ratchet Wrench

123688203
41140708-TCS: RNCC: 3 | RNVC: 2

25 Apr 2006

5120-12-025-8800

5120-12-368-6857
Mechanical Puller

123686857
600590: RNCC: 3 | RNVC: 2

6 Apr 2006

5120-12-355-4984
Dreh Haltewerkzeug

123554984
5584835: RNCC: 3 | RNVC: 2

20 Nov 2001

5120-12-368-3170
Socket Head Screw Key

123683170
43270027-TCS: RNCC: 3 | RNVC: 2

16 Feb 2006

5120-12-126-3167
Torque Wrench

121263167
8561-01: RNCC: 3 | RNVC: 2
091M01100: RNCC: 5 | RNVC: 2
091M80104: RNCC: 5 | RNVC: 2
244075-1: RNCC: 5 | RNVC: 2
TVA5120-2-5-505-1/2IN-20-100NM: RNCC: 5 | RNVC: 2
756B: RNCC: 5 | RNVC: 9
K756WIB: RNCC: 5 | RNVC: 9
5120-40372: RNCC: 6 | RNVC: 9

30 May 1969

5120-12-199-0655
Retaining Ring Pliers

121990655
DIN5254-B10GLATT: RNCC: 2 | RNVC: 2
8010A11: RNCC: 3 | RNVC: 2
TS5120-0571: RNCC: 5 | RNVC: 1
TS5120-0571-B10-25: RNCC: 5 | RNVC: 1
TS5120-0571-I.10: RNCC: 5 | RNVC: 2
6706180: RNCC: 5 | RNVC: 2
B10DIN5254-GLATT: RNCC: 5 | RNVC: 2
TA533: RNCC: 5 | RNVC: 2
DIN5254-B10-GLATT: RNCC: 5 | RNVC: 9

22 Mar 1984

5120-12-368-9063
Box Wrench

123689063
110A-7/8X15/16: RNCC: 3 | RNVC: 2
00.26.73.54: RNCC: 5 | RNVC: 2

5 May 2006

5120-12-303-3424
Socket Head Screw Key

123033424
P-886674-401: RNCC: 3 | RNVC: 2
P886674-401: RNCC: 5 | RNVC: 2

15 Mar 1985

5120-12-180-0996
Ausziehvorrichtung

121800996
P-895041-407: RNCC: 3 | RNVC: 2
P895041-407: RNCC: 5 | RNVC: 2

20 Aug 1979

5120-12-336-5091
Bearing And Bushing Inserter

123365091
0851 5126: RNCC: 3 | RNVC: 2
8515126: RNCC: 5 | RNVC: 2

21 Nov 1994

5120-12-338-3516
Spanner Wrench

123383516
FLF1-9P58-51.010: RNCC: 3 | RNVC: 2

26 Jun 1995

5120-12-173-2290
Mechanical Puller

121732290
009-017-200-000W64: RNCC: 3 | RNVC: 2

29 Mar 1978

5120-12-340-9325
Socket Wrench

123409325
90-041-1: RNCC: 3 | RNVC: 2
81668070013: RNCC: 5 | RNVC: 2

6 Jul 1996

5120-12-370-7583
Hand Tube Flaring Punch

123707583
5176336: RNCC: 3 | RNVC: 2

18 Dec 2006

5120-12-130-3386

5120-12-328-2959
Spanner Wrench

123282959
116589100700: RNCC: 3 | RNVC: 2
116 589 10 07 00: RNCC: 5 | RNVC: 2

5 May 1992

5120-12-368-2119
Socket Head Screw Key

123682119
DIN65253-16: RNCC: 2 | RNVC: 2
42 X 16: RNCC: 3 | RNVC: 2
6350650: RNCC: 5 | RNVC: 2
4010886635063: RNCC: 5 | RNVC: 2

9 Jan 2006

5120-12-378-5285
L Einstellwerkzeug

123785285
S4-3500110W01: RNCC: 3 | RNVC: 2

17 Apr 2009

5120-12-175-2493
Socket Wrench

121752493
EV4-846: RNCC: 3 | RNVC: 2
EV4-846: RNCC: 5 | RNVC: 9

4 Sep 1978

5120-12-303-7807
Screwdriver Bit

123037807
C407-A53-C140: RNCC: 3 | RNVC: 2
C407A53C140: RNCC: 5 | RNVC: 2

26 Apr 1985

5120-12-184-6471
Justier- Schluessel

121846471
6402003: RNCC: 3 | RNVC: 2
64-02-003: RNCC: 5 | RNVC: 9

7 Aug 1980

5120-12-370-9052
Box Wrench

123709052
1998A: RNCC: 3 | RNVC: 2
80.99603-0323: RNCC: 5 | RNVC: 2
80996030323: RNCC: 5 | RNVC: 2

15 Jan 2007

5120-12-120-6444
Flat Tip Screwdriver

121206444
527340080: RNCC: 3 | RNVC: 2
148/8: RNCC: 3 | RNVC: 2
527340080: RNCC: 5 | RNVC: 2
131526: RNCC: 5 | RNVC: 9
8007-8: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-306-5741
Tool Handle Wedge

123065741
32711: RNCC: 3 | RNVC: 2

11 Mar 1986

5120-12-176-1104
Dorn

121761104
30-505: RNCC: 3 | RNVC: 2

9 Nov 1978

5120-12-335-9628
Bearing And Bushing Inserter

123359628
0851 6796: RNCC: 3 | RNVC: 2
8516796: RNCC: 5 | RNVC: 2

6 Oct 1994

5120-12-358-7773
Bearing And Bushing Inserter

123587773
80996060431: RNCC: 3 | RNVC: 2

13 Nov 2002

5120-12-312-2557
Ge Montierwerkzeug

123122557
5910 890 2205: RNCC: 3 | RNVC: 2

9 Dec 1987

5120-12-174-0213
Socket Wrench Socket

121740213
C7800-19: RNCC: 3 | RNVC: 2
109684: RNCC: 5 | RNVC: 2

29 May 1978

5120-12-309-6559
Spanner Wrench

123096559
335927-9014.000: RNCC: 3 | RNVC: 2
33 59 27-9014.000: RNCC: 5 | RNVC: 9
335927-9014-000: RNCC: 5 | RNVC: 9
335927-9014.000: RNCC: 5 | RNVC: 9

13 Feb 1987

5120-12-157-2726
Bandschellenzange

121572726
KR6-8: RNCC: 3 | RNVC: 2
121-00688: RNCC: 5 | RNVC: 2
171001001: RNCC: 5 | RNVC: 2
121-00688: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-194-3190
Bearing And Bushing Inserter

121943190
3S51446-0000: RNCC: 3 | RNVC: 2
3S51446-0000-405: RNCC: 3 | RNVC: 2
3S51446-0000-403: RNCC: 5 | RNVC: 2
3S51446-0000-407: RNCC: 5 | RNVC: 2
MAGERD 1626: RNCC: 5 | RNVC: 9

21 Oct 1982

5120-12-368-9504
Hand Tube Bender

123689504
2.4519: RNCC: 3 | RNVC: 2
00.16.53.04: RNCC: 5 | RNVC: 2
2.519 3/4: RNCC: 5 | RNVC: 9

9 May 2006

5120-12-350-2708
Bl Ausbeulwerkzeug

123502708
063/R: RNCC: 3 | RNVC: 2

9 Mar 2000

5120-12-308-1492
Spindelheb Spindel

123081492
2356.1.4.00: RNCC: 3 | RNVC: 2

8 Sep 1986

5120-12-126-3091

5120-12-364-5958
Socket Wrench Crowfoot Attachment

123645958
01190012-TCS: RNCC: 3 | RNVC: 2

13 Oct 2004

5120-12-133-3715

5120-12-092-2285

5120-12-133-3963
Screwdriver Bit

121333963
NO PRIMARY REF 12-133-3963: RNCC: 3 | RNVC: 2
109048: RNCC: 5 | RNVC: 9
6988M6: RNCC: 5 | RNVC: 9
6988M7X0-90: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-152-5600
Welle Einbauhuelse

121525600
169124305: RNCC: 3 | RNVC: 2
7101-86-13-10: RNCC: 5 | RNVC: 9
7101-86-13.10: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-147-1875
K Montage- Huelse

121471875
3335890061: RNCC: 3 | RNVC: 2
333589006100: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-381-9220
Socket Wrench

123819220
F1.4928-00-98-00.28-00: RNCC: 3 | RNVC: 2
1202505: RNCC: 5 | RNVC: 2

19 Apr 2010

5120-12-154-7530
Biegeeisen

121547530
251/8: RNCC: 3 | RNVC: 2
196.01: RNCC: 3 | RNVC: 2
5180-162FIG2-16: RNCC: 5 | RNVC: 9
TL5180-0162FIG3-16: RNCC: 5 | RNVC: 9
5180-0162FIG2-16: RNCC: 5 | RNVC: 9
TL5180-0162-160: RNCC: 5 | RNVC: 9
196: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-326-0175
Socket Wrench Screwdriver Attachment

123260175
3049-8: RNCC: 3 | RNVC: 2
103589010900: RNCC: 3 | RNVC: 2
02152408: RNCC: 5 | RNVC: 2
3049/8-8: RNCC: 5 | RNVC: 9

30 Jul 1991

5120-12-150-1036
Spanner Wrench

121501036
C42407-A30-A1: RNCC: 3 | RNVC: 2
C42407A30A1: RNCC: 5 | RNVC: 2
C42407A30A1: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-163-6649
Hydraulis Abzieher

121636649
26-21C1623G001: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-365-9664
Socket Wrench

123659664
05005300001: RNCC: 3 | RNVC: 2
190I-5,5VDE: RNCC: 5 | RNVC: 2
005300: RNCC: 5 | RNVC: 9

22 Feb 2005

5120-12-377-1114
Mechanical Puller

123771114
12614-2: RNCC: 3 | RNVC: 2
71040012: RNCC: 5 | RNVC: 2

11 Dec 2008

5120-12-147-6739
Socket Wrench

121476739
895-6: RNCC: 3 | RNVC: 2
200-6: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-315-8969
Montierhuelse

123158969
0009419274: RNCC: 3 | RNVC: 2

6 Dec 1988

5120-12-389-5118
Torque Wrench Adapter

123895118
R809505: RNCC: 3 | RNVC: 2

16 Jul 2012

5120-12-363-8368
Bearing And Bushing Inserter

123638368
T671P5001117: RNCC: 3 | RNVC: 2

29 Jul 2004

5120-12-384-9725
Shaf Mounting Tool

123849725
F6555196: RNCC: 3 | RNVC: 2

14 Apr 2011

5120-12-381-5408
Drill Drift

123815408
1926500: RNCC: 3 | RNVC: 2

2 Mar 2010

5120-12-094-0359

5120-12-146-7575
K Eindrueck- Huelse

121467575
02059: RNCC: 3 | RNVC: 2
25704-360400.07.0: RNCC: 3 | RNVC: 2
25704-360400-07-0: RNCC: 5 | RNVC: 2
02059: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-301-8507
Spanner Wrench

123018507
DIN3115-A-M2: RNCC: 2 | RNVC: 2
209-2,0X80: RNCC: 3 | RNVC: 2
52780-005: RNCC: 5 | RNVC: 2
27510: RNCC: 5 | RNVC: 9
1435-2: RNCC: 5 | RNVC: 9
209M2: RNCC: 5 | RNVC: 9
DIN3115-AM2: RNCC: 5 | RNVC: 9

13 Nov 1984

5120-12-123-5096
Open End Wrench

121235096
NO PRIMARY REF 12-123-5096: RNCC: 3 | RNVC: 2
330A15-64X13-64: RNCC: 5 | RNVC: 9
105054: RNCC: 5 | RNVC: 9
1932WZ15-64X13-64: RNCC: 5 | RNVC: 9
00790: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-181-5100
Socket Wrench

121815100
143400: RNCC: 3 | RNVC: 2
89231040: RNCC: 5 | RNVC: 2
698-778-0000: RNCC: 5 | RNVC: 2
89415114: RNCC: 5 | RNVC: 2
181212: RNCC: 5 | RNVC: 9

26 Nov 1979

5120-12-010-9647

5120-12-126-2146
Flat Tip Screwdriver

121262146
213-4X125: RNCC: 3 | RNVC: 2
6661-4X125: RNCC: 5 | RNVC: 2
213025: RNCC: 5 | RNVC: 2
53935: RNCC: 5 | RNVC: 9
87502: RNCC: 5 | RNVC: 9
833-5: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-378-4228
Torque Wrench

123784228
7718210: RNCC: 3 | RNVC: 2
4002805757093: RNCC: 5 | RNVC: 2
757-09: RNCC: 5 | RNVC: 2
7718210: RNCC: 5 | RNVC: 2
4002805757093: RNCC: 5 | RNVC: 2
757-09: RNCC: 5 | RNVC: 2

3 Apr 2009

5120-12-330-1212
Mechanical Puller

123301212
0852 0360: RNCC: 3 | RNVC: 2
8520360: RNCC: 5 | RNVC: 2

5 Nov 1992

5120-12-379-1673
Screwdriver Bit Set

123791673
05003471001: RNCC: 3 | RNVC: 2

30 Jun 2009

5120-12-041-5636

5120-12-336-5106
Pin Inserter And Remover

123365106
0852 5044: RNCC: 3 | RNVC: 2
8525044: RNCC: 5 | RNVC: 2

21 Nov 1994

5120-12-366-5655
Werkst Druckstueck

123665655
2259110: RNCC: 3 | RNVC: 2

10 May 2005

5120-12-389-8118
Grommet Inserting Punch And Die

123898118
50.0517.00: RNCC: 3 | RNVC: 2

27 Aug 2012

5120-12-368-9708
Socket Wrench Socket

123689708
8114: RNCC: 3 | RNVC: 2

9 May 2006

5120-12-345-3588
Mechanical Puller

123453588
F0 097266: RNCC: 3 | RNVC: 2

5 Mar 1998

5120-12-700-7940
Socket Wrench

127007940
SCHLUESSEL,SPEZIAL,RAD TLF32: RNCC: 2 | RNVC: 2

26 May 1993

5120-12-124-8489
Stell Stift

121248489
30-30-01: RNCC: 3 | RNVC: 2
FW87F: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-376-4039
Screwdriver Bit

123764039
05002920001: RNCC: 3 | RNVC: 2
82-PH1-0,6X4,0: RNCC: 5 | RNVC: 2

25 Sep 2008

5120-12-186-1946
Gewindebuchse

121861946
23305-264113.02.0: RNCC: 2 | RNVC: 2
23305-264113-02-0: RNCC: 3 | RNVC: 2
23305-264113-02-0: RNCC: 5 | RNVC: 9
23305-264113.02.0: RNCC: 5 | RNVC: 9

5 Dec 1980

5120-12-168-3587
Screwdriver Bit

121683587
7809XZN-10: RNCC: 3 | RNVC: 2
1831080: RNCC: 5 | RNVC: 2
2817135: RNCC: 5 | RNVC: 2
2817-135: RNCC: 5 | RNVC: 2
19JXZN10-0: RNCC: 5 | RNVC: 9
19JXZNCS10-0: RNCC: 5 | RNVC: 9
19JXZNCS10-0: RNCC: 5 | RNVC: 9

10 Mar 1977

5120-12-338-2652
Socket Wrench

123382652
DIN3119-17X19X22-A12,5: RNCC: 2 | RNVC: 2
715-01: RNCC: 3 | RNVC: 2
1925210008: RNCC: 5 | RNVC: 2

13 Jun 1995

5120-12-197-2498
Hand Tube Swaging Punch Set

121972498
S51576-0000R1BISR5: RNCC: 3 | RNVC: 2

5 Oct 1983

5120-12-362-4946
Tire Iron

123624946
54.0084.960.73: RNCC: 3 | RNVC: 2
38-16: RNCC: 5 | RNVC: 2

3 Mar 2004

5120-12-365-5152
Craftsman's Tweezers

123655152
T2339: RNCC: 3 | RNVC: 2

11 Jan 2005

5120-12-390-4221
Mechanical Puller Step Plate

123904221
F6378971: RNCC: 3 | RNVC: 2

12 Nov 2012

5120-12-343-3836
Eindrueckwerkzeugte

123433836
406589134300: RNCC: 3 | RNVC: 2

12 Jun 1997

5120-12-369-6923
Socket Wrench

123696923
4040M10X13: RNCC: 3 | RNVC: 2
34/10X13: RNCC: 3 | RNVC: 2
29-10X13: RNCC: 3 | RNVC: 2
493-10X13: RNCC: 3 | RNVC: 2
00.31.92.88: RNCC: 5 | RNVC: 2
43011013: RNCC: 5 | RNVC: 2

9 Aug 2006

5120-12-383-6263
Socket Wrench Extension

123836263
AS576-1833AR-03: RNCC: 3 | RNVC: 2

16 Nov 2010

5120-12-123-5619
Socket Wrench

121235619
NO PRIMARY REF 12-123-5619: RNCC: 3 | RNVC: 2
000589160904: RNCC: 5 | RNVC: 2
070040: RNCC: 5 | RNVC: 9
70-12X14: RNCC: 5 | RNVC: 9
01310: RNCC: 5 | RNVC: 9
430-12X14: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-390-2604
Socket Wrench Socket

123902604
80996030311: RNCC: 3 | RNVC: 2
80.99603-0311: RNCC: 5 | RNVC: 2

23 Oct 2012

5120-12-358-7503
Socket Head Screw Key

123587503
240-159: RNCC: 3 | RNVC: 2

11 Nov 2002

5120-12-336-0941
Schluesseleinsatz

123360941
0005480-001: RNCC: 3 | RNVC: 2
0005480-001: RNCC: 5 | RNVC: 9

24 Oct 1994

5120-12-336-1678
Box Wrench

123361678
5656101: RNCC: 2 | RNVC: 2
5656101: RNCC: 3 | RNVC: 2

3 Nov 1994

5120-12-136-5294
Open End Wrench

121365294
DIN895-10X13: RNCC: 2 | RNVC: 2
N0300571: RNCC: 3 | RNVC: 2
895-10X13: RNCC: 3 | RNVC: 2
8797950504: RNCC: 5 | RNVC: 2
000895010003: RNCC: 5 | RNVC: 2
10X13DIN895: RNCC: 5 | RNVC: 2
N300571: RNCC: 5 | RNVC: 2
00017020280: RNCC: 5 | RNVC: 2
8590381102117: RNCC: 5 | RNVC: 2
895-10X13: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-140-5645
Socket Head Screw Key

121405645
DIN905-14: RNCC: 2 | RNVC: 2
3015/14: RNCC: 3 | RNVC: 2
14DIN905: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-325-8801
Mechanical Puller

123258801
20072: RNCC: 3 | RNVC: 2
000589513400: RNCC: 3 | RNVC: 2

17 Jul 1991

5120-12-193-5713
Mechanical Puller Forcing Screw

121935713
3S51340-0000: RNCC: 3 | RNVC: 2
3S51340-0000-405: RNCC: 5 | RNVC: 2
3S51340-0000-407: RNCC: 5 | RNVC: 2
MAGERD 3542: RNCC: 5 | RNVC: 2
3S51340-0000-403: RNCC: 5 | RNVC: 2

4 Aug 1982

5120-12-143-9801
Laufr Tragarmheber

121439801
2360-264003.00.0: RNCC: 2 | RNVC: 2
2360-264003-00-0: RNCC: 3 | RNVC: 2
2360-264003.00.0: RNCC: 3 | RNVC: 2
2360-264003-00-0: RNCC: 3 | RNVC: 2
2360-264003.00.0: RNCC: 5 | RNVC: 2
2360-264003.00.0: RNCC: 5 | RNVC: 9
2360-264003-00-0: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-185-6669
Spanner Wrench

121856669
4900059-721110.000.0: RNCC: 3 | RNVC: 2
4900059-721110-000-0: RNCC: 3 | RNVC: 2
721110-000-0: RNCC: 5 | RNVC: 2

23 Oct 1980

5120-12-199-0777
Wrench

121990777
S20: RNCC: 3 | RNVC: 2

23 Mar 1984

5120-12-340-7859
Plier Clamp

123407859
GRZS: RNCC: 3 | RNVC: 2

12 Jun 1996

5120-12-390-5660
Spanner Wrench

123905660
166104-0C: RNCC: 3 | RNVC: 2
166104-0C: RNCC: 5 | RNVC: 2

23 Nov 2012

5120-12-171-5733
Socket Wrench

121715733
VG95211-ML-121715733: RNCC: 2 | RNVC: 2
1X56 122 385: RNCC: 3 | RNVC: 2
1X56122385: RNCC: 5 | RNVC: 9

26 Oct 1977

5120-12-388-0556
Crimping Tool Die

123880556
1183-11100: RNCC: 3 | RNVC: 2
80996250112: RNCC: 5 | RNVC: 2
80.99625-0112: RNCC: 5 | RNVC: 2

22 Feb 2012

5120-12-359-4733
Socket Wrench Adapter-Extension

123594733
AS565-1817A-03: RNCC: 3 | RNVC: 2

10 Feb 2003

5120-12-387-3011
Hose Strap Band Clamping Tool

123873011
10625: RNCC: 3 | RNVC: 2
76540002: RNCC: 5 | RNVC: 2

28 Nov 2011

5120-12-192-0309
Spanner Wrench

121920309
4D21567: RNCC: 3 | RNVC: 2
4D21567: RNCC: 5 | RNVC: 2
4D21567: RNCC: 5 | RNVC: 2

22 Mar 1982

5120-12-364-4551
Mechanical Puller Attachment

123644551
T661P1002218: RNCC: 3 | RNVC: 2

29 Sep 2004

5120-12-320-7659
Face Spanner Wrench Socket

123207659
0850 1815: RNCC: 3 | RNVC: 2
8501815: RNCC: 5 | RNVC: 2

14 Feb 1990

5120-12-322-0717
Mechanical Puller

123220717
844600195: RNCC: 3 | RNVC: 2

20 Jul 1990

5120-12-127-3948
Socket Wrench

121273948
140: RNCC: 3 | RNVC: 2
843867: RNCC: 3 | RNVC: 9

30 May 1969

5120-12-391-0635
Mechanical Puller Attachment

123910635
B80144754: RNCC: 3 | RNVC: 2

22 Jan 2013

5120-12-339-4603
Swivel Knob Jeweler's Screwdriver

123394603
4880X ESD 3,0X100: RNCC: 3 | RNVC: 2
ESD140310: RNCC: 3 | RNVC: 2
T4880XESD310: RNCC: 5 | RNVC: 9
4870-3,0X100: RNCC: 5 | RNVC: 9

24 Nov 1995

5120-12-174-4349
Open End Wrench

121744349
12-10: RNCC: 3 | RNVC: 2
999/4/42556/445: RNCC: 5 | RNVC: 1
C22407-Z1000-C8: RNCC: 5 | RNVC: 2
C22407Z1000C8: RNCC: 5 | RNVC: 2
V22199-Z-C328: RNCC: 5 | RNVC: 2
V22199ZC328: RNCC: 5 | RNVC: 2
40061010: RNCC: 5 | RNVC: 2
52010110: RNCC: 5 | RNVC: 9

29 Jun 1978

5120-12-352-6731
Socket Wrench

123526731
6.812-023.0: RNCC: 3 | RNVC: 2

6 Dec 2000

5120-12-155-0611
Spanner Wrench

121550611
3-62-020: RNCC: 3 | RNVC: 2
3-62-020: RNCC: 3 | RNVC: 9

30 May 1969

5120-12-194-3260
Plier Clamp

121943260
71807-240: RNCC: 3 | RNVC: 2
727950-240: RNCC: 3 | RNVC: 2
250A-13-1301: RNCC: 5 | RNVC: 2
71970: RNCC: 5 | RNVC: 9
250A-13-1301: RNCC: 5 | RNVC: 9
71807-240: RNCC: 5 | RNVC: 9

21 Oct 1982

5120-12-317-4335
Cross Tip Screwdriver

123174335
08735: RNCC: 3 | RNVC: 9
52792/540: RNCC: 5 | RNVC: 2
54.0084.989.17: RNCC: 5 | RNVC: 2

6 Apr 1989

5120-12-154-0435
Socket Head Screw Key

121540435
510305-0000-01: RNCC: 2 | RNVC: 2
510305-0000-01: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-153-7190
Torque Wrench Adapter

121537190
CH2522-20-4FE: RNCC: 3 | RNVC: 2
5615890203/00: RNCC: 5 | RNVC: 2
561589020300: RNCC: 5 | RNVC: 2
CH2522-20-4FE: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-318-1751
Mechanical Puller

123181751
E11.49021-0290: RNCC: 3 | RNVC: 2
200.042: RNCC: 5 | RNVC: 2

16 Jun 1989

5120-12-142-0262
Slip Joint Pliers

121420262
NO PRIMARY REF 12-142-0262: RNCC: 3 | RNVC: 2
042E004: RNCC: 5 | RNVC: 2
106492: RNCC: 5 | RNVC: 9
2563V: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-198-6036
Socket Wrench

121986036
E42P00-0306: RNCC: 3 | RNVC: 2

14 Feb 1984

5120-12-328-1171
Flat Tip Screwdriver

123281171
4-206: RNCC: 3 | RNVC: 2

8 Apr 1992

5120-12-329-2518
Mechanical Puller Step Plate

123292518
3051: RNCC: 3 | RNVC: 2

28 Jul 1992

5120-12-156-1623
Screw Extractor Set

121561623
M457: RNCC: 3 | RNVC: 2
M457: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-341-1152
Socket Wrench Set

123411152
A6716DZ: RNCC: 3 | RNVC: 2
1820831: RNCC: 5 | RNVC: 2
182083: RNCC: 5 | RNVC: 9

30 Jul 1996

5120-12-364-3458
Socket Head Screw Key

123643458
43150007-TCS: RNCC: 3 | RNVC: 2

14 Sep 2004

5120-12-146-0588
Eindrueck- Huelse

121460588
23114-7101-05: RNCC: 2 | RNVC: 2
510156: RNCC: 3 | RNVC: 2
510156: RNCC: 5 | RNVC: 9
510156: RNCC: 5 | RNVC: 9
23114-7101-05: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-377-0331
Torque Wrench Adapter

123770331
733/10-16: RNCC: 3 | RNVC: 2
4018754085163: RNCC: 5 | RNVC: 2
58231016: RNCC: 5 | RNVC: 2

8 Dec 2008

5120-12-121-5632
Trowel

121215632
DIN6441-B140: RNCC: 2 | RNVC: 2
DIN6441-145: RNCC: 5 | RNVC: 9
145DIN6441: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-308-2381
Mechanical Puller

123082381
43/3: RNCC: 3 | RNVC: 2
01.52.26.94: RNCC: 5 | RNVC: 2
55025120: RNCC: 5 | RNVC: 2
43-3: RNCC: 5 | RNVC: 2

18 Sep 1986

5120-12-315-3637
Socket Wrench Socket

123153637
2339-100001.001.0: RNCC: 2 | RNVC: 2
2339-100001.001.0: RNCC: 3 | RNVC: 2

15 Oct 1988

5120-12-152-7539
Blindniete Zugkopf

121527539
TL5120-0061SEC2-1-11: RNCC: 2 | RNVC: 2
411660: RNCC: 5 | RNVC: 9
5120-0061SEC2-1-11: RNCC: 5 | RNVC: 9
5120-061SEC2-1-11: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-199-2481
Okular Zange

121992481
335921-9005.000: RNCC: 3 | RNVC: 2
335921-9005.000: RNCC: 5 | RNVC: 9
530116-W7: RNCC: 5 | RNVC: 9

5 Apr 1984

5120-12-186-7627
Socket Head Screw Key

121867627
DIN911-17L: RNCC: 2 | RNVC: 2
43000: RNCC: 3 | RNVC: 2
4300: RNCC: 5 | RNVC: 2
17LDIN911: RNCC: 5 | RNVC: 2
DIN 911-17L: RNCC: 5 | RNVC: 9

2 Feb 1981

5120-12-186-2861
Hand Hydraulic Jack

121862861
TL5120-0090-100: RNCC: 2 | RNVC: 2
150.027.9: RNCC: 3 | RNVC: 2
ATNX 10-175: RNCC: 5 | RNVC: 2
017.353.3: RNCC: 5 | RNVC: 9
209.673.0: RNCC: 5 | RNVC: 9
25045-7: RNCC: 5 | RNVC: 9
305320.2: RNCC: 5 | RNVC: 9
HVN10-175: RNCC: 5 | RNVC: 9
8.454.579.000: RNCC: 5 | RNVC: 9
0005839515: RNCC: 5 | RNVC: 9

13 Dec 1980

5120-12-193-0245
Socket Wrench Handle Ratchet Head

121930245
CH 1772/42.54 NM: RNCC: 3 | RNVC: 2
CH1772-42-54NM: RNCC: 5 | RNVC: 2
CH1772/42.54NM: RNCC: 5 | RNVC: 2
CH 1772/42.54 NM: RNCC: 5 | RNVC: 9
CH1772-42-54NM: RNCC: 5 | RNVC: 9
CH1772/42.54NM: RNCC: 5 | RNVC: 9
NM 296 BLATT 3 TEIL 1: RNCC: 5 | RNVC: 9

15 Jun 1982

5120-12-181-2902
Ein- Und Ausziehvor

121812902
23305-264113.00.0: RNCC: 2 | RNVC: 2
23305-264113-00-0: RNCC: 3 | RNVC: 2
23305-264113-00-0: RNCC: 5 | RNVC: 9
23305-264113.00.0: RNCC: 5 | RNVC: 9

12 Nov 1979

5120-12-163-6634
Abziehvorrichtung

121636634
30-79350-6025: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-379-0549
Wrench

123790549
D0103905-001: RNCC: 3 | RNVC: 2
D0103905 000: RNCC: 5 | RNVC: 2

18 Jun 2009

5120-12-319-2212
Hand Terminal Crimping Tool

123192212
62140-101: RNCC: 3 | RNVC: 2
62050 101: RNCC: 5 | RNVC: 2

14 Sep 1989

5120-12-173-1715
Spanner Wrench

121731715
V7040-001-921-1: RNCC: 3 | RNVC: 2
V7040-001-921-1: RNCC: 5 | RNVC: 2

22 Mar 1978

5120-12-354-6685
K Einstellwerkzeug

123546685
4425891063/00: RNCC: 3 | RNVC: 2
442589106300: RNCC: 5 | RNVC: 2
4225890163/00: RNCC: 5 | RNVC: 9

14 Aug 2001

5120-12-186-1039
Socket Wrench

121861039
1243500EE8940-05: RNCC: 3 | RNVC: 2
N92165H1: RNCC: 5 | RNVC: 2
01243500: RNCC: 5 | RNVC: 2

27 Nov 1980

5120-12-172-9540
Dorn

121729540
VG95211-ML-121729540: RNCC: 2 | RNVC: 2
1X56 122 396: RNCC: 3 | RNVC: 2
1X56122396: RNCC: 5 | RNVC: 2

6 Mar 1978

5120-12-120-5787
Asphalt Rake

121205787
4120: RNCC: 3 | RNVC: 2
3895-0001-2-1-4: RNCC: 5 | RNVC: 9
3895-001-2-1-4: RNCC: 5 | RNVC: 9
TL3895-0001-2-1-4: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-369-5866
Swivel Knob Jeweler's Screwdriver

123695866
05118022001: RNCC: 3 | RNVC: 2
165 PH0: RNCC: 3 | RNVC: 2
4752-0: RNCC: 3 | RNVC: 2
2050-PH0: RNCC: 5 | RNVC: 2
6442930: RNCC: 5 | RNVC: 2
47520020: RNCC: 5 | RNVC: 2
118022: RNCC: 5 | RNVC: 9

27 Jul 2006

5120-12-176-7728
Ruecksetzeinrichtun

121767728
3-9314-4900-3: RNCC: 3 | RNVC: 9

18 Dec 1978

5120-12-121-4890
Open End Wrench

121214890
TL5120-0101-220: RNCC: 2 | RNVC: 2
12A-9/32: RNCC: 3 | RNVC: 2
40461818: RNCC: 5 | RNVC: 2
2209-29: RNCC: 5 | RNVC: 9
104972: RNCC: 5 | RNVC: 9
1931Z9-32: RNCC: 5 | RNVC: 9
1931Z9/32: RNCC: 5 | RNVC: 9
TK-KG55-5120-354-220: RNCC: 5 | RNVC: 9
TK5120-354-220: RNCC: 5 | RNVC: 9
TL5120-0082-470: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-143-1068
Sei Fuehrungsstange

121431068
4073206002: RNCC: 3 | RNVC: 2
2360-261000.08.0: RNCC: 3 | RNVC: 2
2360-261000-08-0: RNCC: 5 | RNVC: 2
2360-261000-08-0: RNCC: 5 | RNVC: 2
2360-261000.08.0: RNCC: 5 | RNVC: 2
2360-261000.08.0: RNCC: 5 | RNVC: 9
2360-261000-08-0: RNCC: 5 | RNVC: 9
2360-261000.08.0: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-023-1483

5120-12-178-4454

5120-12-028-0742

5120-12-384-9657
Hand Hammer

123849657
52.000.006: RNCC: 3 | RNVC: 2
52.000.006: RNCC: 5 | RNVC: 2

14 Apr 2011

5120-12-123-5973

5120-12-305-2511
Bearing And Bushing Inserter

123052511
6796948W11: RNCC: 3 | RNVC: 2

15 Oct 1985

5120-12-338-0647
We Montierwerkzeug

123380647
2804 1155: RNCC: 3 | RNVC: 2
WE28563: RNCC: 5 | RNVC: 2

17 May 1995

5120-12-183-5097
Socket Head Screw Key

121835097
105-42242.03W1: RNCC: 3 | RNVC: 2
105-42242-03W1: RNCC: 5 | RNVC: 2

22 Apr 1980

5120-12-156-1544
Socket Head Screw Key

121561544
NM290-10: RNCC: 3 | RNVC: 2
NM290-10: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-185-3114
Ratsche

121853114
TL5136-0001-A1: RNCC: 2 | RNVC: 2
479092: RNCC: 3 | RNVC: 2
4810: RNCC: 5 | RNVC: 9

25 Sep 1980

5120-12-340-4765
Mechanical Puller

123404765
30-20: RNCC: 3 | RNVC: 2

19 Apr 1996

5120-12-171-0605
Spanner Wrench

121710605
12706-1120-003W1: RNCC: 2 | RNVC: 2
335930-9005.000: RNCC: 3 | RNVC: 2
12706-1120.003W1: RNCC: 5 | RNVC: 2
12706-1120-003W1: RNCC: 5 | RNVC: 9
335930-9005.000: RNCC: 5 | RNVC: 9

5 Sep 1977

5120-12-176-2817
Montagewerkzeug

121762817
1X56 136 512: RNCC: 3 | RNVC: 2
8220909: RNCC: 5 | RNVC: 2
8475520: RNCC: 5 | RNVC: 2
80.99606-0104: RNCC: 5 | RNVC: 9
80996060104: RNCC: 5 | RNVC: 9
1X56136512: RNCC: 5 | RNVC: 9

23 Nov 1978

5120-12-316-9747
Spanner Wrench

123169747
1966485: RNCC: 3 | RNVC: 2
1966485: RNCC: 5 | RNVC: 2
1966485: RNCC: 5 | RNVC: 2
6000.200.72.03/000: RNCC: 5 | RNVC: 2

28 Feb 1989

5120-12-126-1821
Hand Hammer

121261821
1045: RNCC: 3 | RNVC: 2
3870: RNCC: 3 | RNVC: 2
5180-0056-24: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-190-8237
Haltevorrichtung

121908237
NO PRIMARY REF 12-190-8237: RNCC: 3 | RNVC: 2
416090: RNCC: 5 | RNVC: 9

16 Dec 1981

5120-12-174-7374
Schluesseleinsatzsa

121747374
NO PRIMARY REF 12-174-7374: RNCC: 3 | RNVC: 2
4115-2-1-8: RNCC: 5 | RNVC: 9
149381: RNCC: 5 | RNVC: 9
157589: RNCC: 5 | RNVC: 9
4115Z2A: RNCC: 5 | RNVC: 9

25 Jul 1978

5120-12-305-4614
Blacksmiths' Tongs

123054614
6172.01-600: RNCC: 3 | RNVC: 2
51323-7-0: RNCC: 5 | RNVC: 2

8 Nov 1985

5120-12-176-7236
Open End Wrench

121767236
1000025-810000-07: RNCC: 3 | RNVC: 2
1000025-810000-07: RNCC: 5 | RNVC: 2
1000025-810000.07: RNCC: 5 | RNVC: 2
11814/1: RNCC: 5 | RNVC: 2

15 Dec 1978

5120-12-384-0201
Hand Yoke Riveter

123840201
042-00-716 000-V2: RNCC: 3 | RNVC: 2
1000042-716000-V2: RNCC: 5 | RNVC: 2

12 Jan 2011

5120-12-150-2733
Mechanical Puller

121502733
23176-264270-00-0: RNCC: 2 | RNVC: 2
23176-264270.00.0: RNCC: 2 | RNVC: 2
23176-264270-00-0: RNCC: 5 | RNVC: 2
23176-264270-00-0: RNCC: 5 | RNVC: 2
23176-264270.00.0: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-387-1235
Electrical Contact Remover

123871235
1230-14601: RNCC: 3 | RNVC: 2
80.99606-6133: RNCC: 5 | RNVC: 2
80996066133: RNCC: 5 | RNVC: 2

8 Nov 2011

5120-12-373-7700
Mechanical Puller Attachment

123737700
F30272094: RNCC: 3 | RNVC: 2

5 Dec 2007

5120-12-175-6703
Hand Tube Flaring Tool

121756703
KST122.0808: RNCC: 3 | RNVC: 2
2.6055: RNCC: 5 | RNVC: 9
801-0550: RNCC: 5 | RNVC: 9
130492: RNCC: 5 | RNVC: 9
180583: RNCC: 5 | RNVC: 9
4482-45MA: RNCC: 5 | RNVC: 9
4483M: RNCC: 5 | RNVC: 9
12759: RNCC: 5 | RNVC: 9
247912759: RNCC: 5 | RNVC: 9

10 Oct 1978

5120-12-365-7138
Mechanical Puller

123657138
23-JK-070-131: RNCC: 3 | RNVC: 2

26 Jan 2005

5120-12-343-9222
Mechanical Puller

123439222
7037R-3000.00.0: RNCC: 2 | RNVC: 2
7037R-3000.00.0: RNCC: 3 | RNVC: 2
5120123439222: RNCC: 5 | RNVC: 2

13 Aug 1997

5120-12-176-0473
Mechanical Puller

121760473
1X56136664: RNCC: 3 | RNVC: 2

6 Nov 1978

5120-12-321-1359
Mechanical Puller

123211359
F30373492: RNCC: 3 | RNVC: 2
F362800373492: RNCC: 5 | RNVC: 9

2 Apr 1990

5120-12-390-6469
Carrier Socket

123906469
7125295: RNCC: 3 | RNVC: 2

30 Nov 2012

5120-12-338-3538
Pliers

123383538
000240: RNCC: 3 | RNVC: 2

27 Jun 1995

5120-12-148-3822
Lamp Extractor

121483822
1003: RNCC: 3 | RNVC: 2
0100: RNCC: 3 | RNVC: 2
108446: RNCC: 5 | RNVC: 9
5422: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-333-6700
Blindni Mundstueck

123336700
91716: RNCC: 3 | RNVC: 2
917 16: RNCC: 5 | RNVC: 2

20 Jan 1994

5120-12-314-2773
Montierhuelse

123142773
0852 8768: RNCC: 3 | RNVC: 2
8528768: RNCC: 5 | RNVC: 2

23 Jun 1988

5120-12-390-0508
Craftsman's Tweezers

123900508
550100: RNCC: 3 | RNVC: 2
4005887012197: RNCC: 5 | RNVC: 2

27 Sep 2012

5120-12-357-7145
W Spannvorrichtung

123577145
9997001-992051.000.0: RNCC: 3 | RNVC: 2

15 Jul 2002

5120-12-300-1838
Spanner Wrench

123001838
IR915087: RNCC: 3 | RNVC: 2
4900229-36: RNCC: 5 | RNVC: 2

12 Jul 1984

5120-12-156-1583
Female Square Drive Screwdriver Bit Holder

121561583
NM304-21: RNCC: 3 | RNVC: 2
NM304-21: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-185-7161
Montagevorrichtung

121857161
3.601.0.653.004.4: RNCC: 3 | RNVC: 9
1203 0200: RNCC: 5 | RNVC: 9
12030200: RNCC: 5 | RNVC: 9
3-601-0-653-004-4: RNCC: 5 | RNVC: 9

25 Oct 1980

5120-12-168-7480
Hand Bellows

121687480
5019903: RNCC: 3 | RNVC: 2
27000: RNCC: 5 | RNVC: 2
645427000: RNCC: 5 | RNVC: 2
5019-903: RNCC: 5 | RNVC: 9

30 Mar 1977

5120-12-157-1832
Spanner Wrench

121571832
SK411-0-00: RNCC: 2 | RNVC: 2

30 May 1969

5120-12-177-2199
Socket Wrench

121772199
120300: RNCC: 3 | RNVC: 2
510-27: RNCC: 3 | RNVC: 2
4493: RNCC: 5 | RNVC: 2

19 Jan 1979

5120-12-381-9847
Socket Wrench Adapter

123819847
42-80016-500: RNCC: 3 | RNVC: 2
42-80-016.5: RNCC: 5 | RNVC: 2

23 Apr 2010

5120-12-388-9210
Bearing And Bushing Inserter

123889210
80996040303: RNCC: 3 | RNVC: 2
80.99604-0303: RNCC: 5 | RNVC: 2

7 May 2012

5120-12-123-5699
Socket Wrench

121235699
DIN22417-A-M10: RNCC: 2 | RNVC: 2
DIN22417-M10: RNCC: 5 | RNVC: 9
M10DIN22417: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-302-9054
Socket Wrench

123029054
NO PRIMARY REF 12-302-9054: RNCC: 3 | RNVC: 2
HB: RNCC: 5 | RNVC: 9
H.B 913SV 1056 1975 03 61 5323: RNCC: 5 | RNVC: 9

6 Feb 1985

5120-12-193-5938
Socket Wrench Set

121935938
D30DAZ: RNCC: 3 | RNVC: 2
623881: RNCC: 5 | RNVC: 2

9 Aug 1982

5120-12-151-2321
Socket Wrench

121512321
33-14MM: RNCC: 3 | RNVC: 2
2-019662: RNCC: 5 | RNVC: 2
2.019662: RNCC: 5 | RNVC: 2
2-019662: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-135-0209
Socket Wrench

121350209
590-7-32IN150LG: RNCC: 3 | RNVC: 9

30 May 1969

5120-12-374-6055
Bearing And Bushing Inserter

123746055
5075890715/00: RNCC: 3 | RNVC: 2

28 Feb 2008

5120-12-321-8913
Socket Wrench Set

123218913
65.2-50-6: RNCC: 3 | RNVC: 2
065430: RNCC: 5 | RNVC: 2

6 Jul 1990

5120-12-370-9058
Driftpin

123709058
80996170214: RNCC: 3 | RNVC: 2
80.99617-0214: RNCC: 5 | RNVC: 2

15 Jan 2007

5120-12-345-3593
Seal Inserter

123453593
VM 80487-0: RNCC: 3 | RNVC: 2

5 Mar 1998

5120-12-381-8983
Plier Clamp

123818983
3631000: RNCC: 3 | RNVC: 2
D390058: RNCC: 5 | RNVC: 2

15 Apr 2010

5120-12-311-0094
Open End Wrench

123110094
272.324 813: RNCC: 3 | RNVC: 2

16 Jul 1987

5120-12-186-2860
Box Wrench

121862860
3015810066: RNCC: 3 | RNVC: 2

13 Dec 1980

5120-12-198-8622
Socket Wrench Set

121988622
STH40/23/7: RNCC: 3 | RNVC: 2
6722M: RNCC: 3 | RNVC: 2
159441: RNCC: 5 | RNVC: 2

3 Mar 1984

5120-12-121-1193
Swivel Knob Jeweler's Screwdriver

121211193
DIN8320-A0,19X0,8: RNCC: 2 | RNVC: 2
551: RNCC: 3 | RNVC: 2
TVA5120-2-263-039: RNCC: 5 | RNVC: 1
TVA5120-2-263-039-1.1.3: RNCC: 5 | RNVC: 2
DIN8320-A0,16X1: RNCC: 5 | RNVC: 9
DIN8320A0,16X1: RNCC: 5 | RNVC: 9
A0,16X1DIN8320: RNCC: 5 | RNVC: 9
A0-16X1DIN8320: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-123-5302
Box Wrench

121235302
380-1 1/16X1 1/4: RNCC: 3 | RNVC: 2
2-1 1-16X1 1-4: RNCC: 3 | RNVC: 2
380-1-1-16X1-1-4: RNCC: 5 | RNVC: 2
TVA5120-2-263-031.1.1.42: RNCC: 5 | RNVC: 2
2-431: RNCC: 5 | RNVC: 9
20A1 1/16X1 1/4: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-128-4402

5120-12-126-5495
Dorn

121265495
3045890939: RNCC: 3 | RNVC: 2
3045890939: RNCC: 3 | RNVC: 9
304589093900: RNCC: 5 | RNVC: 2
304589093900: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-130-6243
Combination Box And Open End Wrench

121306243
LG45894: RNCC: 3 | RNVC: 2
WZ29: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-371-8729
Catch Lever Tool

123718729
7097815: RNCC: 3 | RNVC: 2

24 May 2007

5120-12-365-5395
Socket Wrench Adapter

123655395
31150002-TCS: RNCC: 3 | RNVC: 2

13 Jan 2005

5120-12-321-6467
Face Spanner Wrench Socket

123216467
01TC61282T01: RNCC: 3 | RNVC: 2

12 Jun 1990

5120-12-382-3956
Combination Box And Open End Wrench Set

123823956
AA 9014: RNCC: 3 | RNVC: 2

15 Jun 2010

5120-12-368-8229
Socket Wrench Extension

123688229
870-35: RNCC: 3 | RNVC: 2
00.47.82.29: RNCC: 5 | RNVC: 2

25 Apr 2006

Load More Results