What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.

What is a Grommet Inserting Punch And Die?

A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Blacksmith's Punch?

A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Tap Extractor?

A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Mechanical Finger?

A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

A Crowbar is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hand Caulking Tool?

A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Screwdriver And Wrench Assembly?

A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Drill Drift?

A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

What is a Fuse Puller?

A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.

What is a Hand Lead Seal Press?

A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.

What is a Hand Beading Tool?

A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.

Hand Tools, Nonedged, Nonpowered - Germany (DE)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by Germany (DE) - NCB is 12

Page 52 of 62

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by Germany

51	20	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - Germany (DE)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 15 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Hand Vise? 31 Items: A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.
What is a Grommet Inserting Punch And Die? 25 Items: A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.
What is a Hand Hydraulic Jack? 111 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 93 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 587 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 13 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
What is a Hand Tube Flaring Tool? 32 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Blacksmith's Punch? 17 Items: A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.
What is a Drain Plug Wrench? 21 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 76 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 14 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 1670 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
What is a Pipe Wrench? 54 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 165 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 55 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
What is a Tap Extractor? 13 Items: A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.
Screwdriver,Offset 77 Items
What is a Screwdriver Bit? 446 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Mechanical Finger? 17 Items: A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.
What is a Socket Wrench Socket? 1303 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 876 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 1273 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 17 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 282 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
What is a Hand Tube Bender? 49 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 669 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 39 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pinch Bar? 17 Items: A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.
What is a Wrecking Bar? 10 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Crowbar? 12 Items: A Crowbar is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 356 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 484 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 37 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 110 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
What is a Hand Caulking Tool? 13 Items: A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.
Face,Hammer,Inserted 54 Items
What is a Hole Sheet Metal Holder? 40 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Screwdriver And Wrench Assembly? 10 Items: A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.
What is a Hand Rivet Set? 62 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Drill Drift? 11 Items: A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.
What is a Socket Wrench Handle Bar? 160 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Stake,Sheet Metalworking 33 Items
Riveter,Blind,Hand 31 Items
What is a Hand Shovel? 24 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 37 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 20 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
Block,Dolly,Sheet Metalworking 33 Items
What is a Piston Ring Compressor? 61 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Fuse Puller? 22 Items: A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.
What is a Hand Lead Seal Press? 12 Items: A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.
What is a Hand Beading Tool? 54 Items: A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.
What is a Hand Hammer? 406 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
Head,Hand Hammer 11 Items
What is a Lamp Extractor? 95 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Carpenters' Pincers? 16 Items: A Carpenters' Pincers (PINCERS,CARPENTERS') is a plierlike hand tool having two opposing jaws which may have hammerlike backs. One handle has a nail or tack pulling claw, the other is shaped to form a screwdriver. The tool may contain a wire cutter. See also NIPPERS, END CUTTING and PINCERS, FARRIERS'.
What is a Farrier's Pincers? 20 Items: A Farrier's Pincers (PINCERS,FARRIER'S) is a plierlike hand tool having two opposing jaws which are designed for removing horseshoes. The handles may have plain or ball ends. See also NIPPERS, END CUTTING and PINCERS, CARPENTERS'.
What is a Hand Pipe And Sewer Auger? 15 Items: A Hand Pipe And Sewer Auger (AUGER,PIPE AND SEWER,HAND) is a flexible spring wire or tape, with a cleaning or boring head at one or both ends. A handle may be provided for turning and pushing. It may also include a metal housing and/or reel in which the tape is coiled. Excludes AUGER, WATER CLOSET, HAND.
What is a Hand Roller? 23 Items: A Hand Roller (ROLLER,HAND) is a hand-held item consisting of a roller on an axle attached to a handle. The width of the roller face (surface) is more than 1/4 inch. See also STITCHER, CEMENTING AND VULCANIZING. Excludes INKING ROLLER, HAND and paint rollers.
What is a Trowel? 36 Items: A Trowel is a tool used for bricklaying, concrete work, plastering, linoleum laying, and masonry work. Excludes CORNER TOOL, CONCRETE.
What is a Hand Abrasive Wheel Dresser? 11 Items: A Hand Abrasive Wheel Dresser (DRESSER,ABRASIVE WHEEL,HAND) is a tool designed to remove glaze from, dress, shape, sharpen, and true solid abrasive wheels. Excludes NIB, DIAMOND, WHEEL DRESSING.
What is a Lamp Cap Extractor? 26 Items: A Lamp Cap Extractor (EXTRACTOR,LAMP CAP) is a tool specifically designed to facilitate the removal of lamp caps from switchboards, panels or indicator lamps.
Replacing Tool,Engine Valve Seat Insert 10 Items
What is a Rivet Bucking Bar? 20 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 154 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 175 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Woven Cable Grip? 30 Items: A Woven Cable Grip (GRIP,CABLE,WOVEN) is a braided wire device designed to clutch a bare or insulated conductor, cable or wire rope, for holding taut or drawing through conduit.
What is a Screw Thread Insert Extractor? 16 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is a Hand Helical Spring Puller Hook? 12 Items: A Hand Helical Spring Puller Hook (HOOK,HELICAL SPRING PULLER,HAND) is a hook whose curved end conforms to Style AP10 of Reference Drawing Group AP.
What is an Electron Tube Extractor? 12 Items: An Electron Tube Extractor (EXTRACTOR,ELECTRON TUBE) is a hand tool designed to facilitate the removal of electron tubes from electronic equipment and to avoid burning the fingers. It may be used for installing tubes.
What is a Cross Tip Screwdriver? 224 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 208 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 61 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 163 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Tool Handle Wedge? 42 Items: A Tool Handle Wedge (WEDGE,TOOL HANDLE) is excludes WEDGE, WOOD.
What is a Valve Tappet Adjusting Tool? 14 Items: A Valve Tappet Adjusting Tool (ADJUSTING TOOL,VALVE TAPPET) is a hand device for adjusting overhead valve tappets of internal combustion engines. It consists of a handle, and at one end a wrench opening or a drive for a replaceable wrench socket, and a knob operated screwdriver tip. The wrench opening (or socket) engages the tappet adjusting screw lock nut and the screwdriver engages the screw.
What is a Hand Powered Poppet Valve Lapper? 16 Items: A Hand Powered Poppet Valve Lapper (LAPPER,POPPET VALVE,HAND POWERED) is a hand tool designed to rotate and/or oscillate poppet type valves in their seats for reseating purposes.
What is a Marlinespike? 11 Items: A Marlinespike is a metal hand tool made in the shape of a tapered pin. One end is pointed and the opposite end may be headed. The body may contain an eye for a lanyard sling, or be grooved lengthwise. Excludes CABLE PICK and FID.
What is an Aligning Punch? 104 Items: An Aligning Punch (PUNCH,ALIGNING) is a round, square, hexagonal or octagonal bodied hand tool, having a round tapered section 6-1/2 inches (165.1 mm) or more in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, DRIFT and DRIFTPIN.
What is a Drift Punch? 39 Items: A Drift Punch (PUNCH,DRIFT) is a round, square, hexagonal, or octagonal bodied hand tool, having a round tapered section 4 to 6 inches (101.6 mm to 152.4 mm) inclusive in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, ALIGNING; and DRIFTPIN.
What is a Socket Wrench Adapter-Extension? 11 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 21 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 149 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Wrench Extension Handle? 36 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Crowfoot Wrench Head Socket? 13 Items: A Crowfoot Wrench Head Socket (SOCKET,CROWFOOT WRENCH HEAD) is a component with an open-wall opening having one end designed to fit into a HEAD, CROWFOOT SOCKET WRENCH and the other end having an internal opening such as hexagonal or 8-point. See also CROWFOOT ATTACHMENT, SOCKET WRENCH.
What is a Socket Wrench Crowfoot Attachment? 267 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 18 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 40 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 35 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 998 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 350 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 102 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 468 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 42 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand-Operated Grommet And Eyelet Press? 14 Items: A Hand-Operated Grommet And Eyelet Press (PRESS,GROMMET AND EYELET,HAND-OPERATED) is a device which punches or pierces holes and in addition fastens or sets eyelets and grommets in cloth, paper and similar material. May be used for fastening or setting rivets, lacing hooks and snaps in cloth, paper and similar material. It is hand operated by lever or screw action. See also PUNCH, EYELET, PLIER TYPE and PRESS, GROMMET AND EYELET, FOOT OPERATED.
What is a Claw Bar? 27 Items: A Claw Bar (BAR,CLAW) is before using, refer to Reference Drawing Group AG.
What is a Pin Vise? 12 Items: A Pin Vise (VISE,PIN) is a clamping device used to hold small items which are usually round. The device consists of a hollow handle having a chuck at one or both ends. The longitudinal axis of the hollow handle is in alignment with that of the chuck(s).
What is a Dapping Punch? 16 Items: A Dapping Punch (PUNCH,DAPPING) is an item consisting of steel bar having one end ball shaped. It is used to form flat metal sheets into a hemispherical shape by working it against a die and striking the opposite end of punch with a hammer.
What is a Tire Iron? 29 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 123 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Machinist's Vise? 64 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Clamp Base Bench Vise? 10 Items: A Clamp Base Bench Vise (VISE,BENCH,CLAMP BASE) is a clamping device consisting of a base, one stationary and one manual screw actuated jaw, and one or more guide bars or rods. Designed with an integral clamp for attaching to a bench, table, or the like. Does not include pipe holding jaws.
What is a Fixed Open End Wrench Set? 61 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Socket Wrench Set? 241 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is a Combination Box And Open End Wrench Set? 48 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Box Wrench Set? 32 Items: A Box Wrench Set (WRENCH SET,BOX) is a group of box wrenches having different characteristics. It may include a HANDLE, EXTENSION WRENCH. See also WRENCH SET, COMBINATION, BOX AND OPEN END.
Spoon,Body And Fender 15 Items
What is a Wrench Kit? 26 Items: A Wrench Kit is an assortment of various types and sizes of wrenches such as SOCKET, SOCKET WRENCH; WRENCH, OPEN END, FIXED; WRENCH, BOX and the like. It may include adapter(s), ratchet(s) and the like. See also WRENCH SET (as modified.
What is a Screw Extractor Set? 14 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 24 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
Jack,Scissors,Hand 17 Items
Pick,Digging 13 Items
What is a Hand Intrenching Tool? 13 Items: A Hand Intrenching Tool (INTRENCHING TOOL,HAND) is a shovel type tool or a pick and shovel combination having standard cutting blade edges or specially designed blade edges for cutting and chopping. It may have a handgrip on the handle. It is designed to be used by individual soldiers primarily for intrenching. Refer to Reference Drawing Group BG for styles.
What is a Piston Ring Expander? 28 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
What is a Joint Breaking Wedge? 12 Items: A Joint Breaking Wedge (WEDGE,JOINT BREAKING) is refer to Reference Drawing Group A before using item name.
Blade,Saddler's Harness Awl 15 Items
Mallet,Rubber 11 Items
What is a Rack Bar Jack? 24 Items: A Rack Bar Jack (JACK,RACK BAR) is excludes JACK, BUMPER and JACK, REEL, HAND.
What is a Hand Tube Flaring Punch? 15 Items: A Hand Tube Flaring Punch (PUNCH,TUBE FLARING,HAND) is a noncutting tool having a shaped end or section designed to flare the ends of tubes. One type is designed to flare the ends of tubes against a tube sheet, and another to flare tube ends to mate with tube fittings. Includes punch components of FLARING TOOL, TUBE, HAND.
What is a Hose Strap Band Clamping Tool? 14 Items: A Hose Strap Band Clamping Tool (CLAMPING TOOL,STRAP BAND,HOSE) is an item designed to tension and lock metal straps around a rubber hose, and the like. It is also used to clamp and hold fittings therein.
What is a Socket Wrench Handle Ratchet Head? 15 Items: A Socket Wrench Handle Ratchet Head (RATCHET HEAD,SOCKET WRENCH HANDLE) is a reversible ratcheting mechanism having a square external end designed to fit into the internal end of a wrench socket or attachment, and has provisions for a round bar grip, but does not include the bar. When furnished with a bar, see HANDLE, SOCKET WRENCH. Excludes RATCHET ATTACHMENT, SOCKET WRENCH.
What is an Etching Needle? 10 Items: An Etching Needle (NEEDLE,ETCHING) is a styluslike tool mounted in a handle. It is used in preparing metal lithographic plates and photo engravings. See also ETCHING POINT.
What is a Mechanical Puller? 1147 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 505 Items
What is a Slip Joint Pliers? 95 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Jewelers' Pliers? 11 Items: A Jewelers' Pliers (PLIERS,JEWELERS') is a tool having jaws designed for use in the assembly and repair of jewelry, watches, and the like. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 112 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 14 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 16 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 35 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 19 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 32 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 73 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Refrigeration Valve Stem Wrench Socket? 10 Items: A Refrigeration Valve Stem Wrench Socket (SOCKET,WRENCH,REFRIGERATION VALVE STEM) is an item having a 1/4 inch (6.3 mm) square external drive on one end, and a square internal opening at the other end. The outside diameter is specially sized to clear openings in refrigeration valve bonnets and covers for reaching recessed stems. It is designed for use with a ratchet wrench for opening and/or closing square stem refrigeration valves.
What is a Drive Pin Punch Set? 27 Items: A Drive Pin Punch Set (PUNCH SET,DRIVE PIN) is a group of PUNCH, DRIVE PIN having different characteristics.
What is a Mechanical Puller Step Plate? 72 Items: A Mechanical Puller Step Plate (STEP PLATE,MECHANICAL PULLER) is a circular disk, flanged to provide a shoulder, and designed to provide a base for the screw point of a PULLER, MECHANICAL when pulling externally mounted bearings, gears, and the like from hollow shafts or housings. It has a concentric, countersunk hole to accommodate the puller screw point.
What is a Solid Center Punch? 26 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Cable Type Ratchet Lever Puller? 34 Items: A Cable Type Ratchet Lever Puller (PULLER,RATCHET LEVER,CABLE TYPE) is an item consisting of a metal frame and ratchet lever reel to which is attached one end of a flexible cable (wire rope). The cable feeds through the fast eye in the metal frame, and may be reeved through a slip hook tackle hook. See also BINDER, LOAD; HOIST, WIRE ROPE and STRETCHER, WIRE.
What is a Hand Yoke Riveter? 13 Items: A Hand Yoke Riveter (RIVETER,YOKE,HAND) is a hand tool designed to install metallic grommets and/or tubular rivets by forcing the unflanged end of the grommet/rivet outward to form another flange which prevents the grommet/rivet from coming out of the item it has been installed in. The tool uses a pliers type pinching action to form the flange. See also PUNCH, EYELET, PLIER TYPE.
What is a Hand Material Handling Hook? 17 Items: A Hand Material Handling Hook (HOOK,MATERIAL HANDLING,HAND) is a hook whose curved end conforms to Style AP1, AP2, AP3 or AP4 of Reference Drawing Group AP. Excludes HOOK, MANHOLE COVER, HAND; HOOK, WIRE BREAKING, HAND; HOOK, ROCK CRUSHER FEEDING, HAND; HOOK, STRAINER REMOVING, HAND and HOOKS, BAG HANDLING, HAND.
What is a Magnetic Retrieving Tool? 22 Items: A Magnetic Retrieving Tool (RETRIEVING TOOL,MAGNETIC) is a hand-operated magnetic device used to locate and pick up metallic articles, such as bolts, nuts, pins, washers, and the like, in confined spaces. It may be rigid, flexible or adjustable. Excludes FINGER, MECHANICAL.
What is a Mechanical Puller Adapter? 68 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Socket Head Screw Socket Wrench Attachment Wrench Set? 10 Items: A Socket Head Screw Socket Wrench Attachment Wrench Set (WRENCH SET,SOCKET HEAD SCREW SOCKET WRENCH ATTACHMENT) is an assortment of various size SOCKET WRENCH ATTACHMENT, SOCKET HEAD SCREW, and HANDLE, SOCKET WRENCH. It may include universal joints, ratcheting adapters and other attachments used therewith.
What is a Mechanical Puller Forcing Screw? 66 Items: A Mechanical Puller Forcing Screw (FORCING SCREW,MECHANICAL PULLER) is a cylindrical, threaded item which may be headed or headless. It may include a threadless portion. All or part of the unthreaded portion(s) must be of a single diameter equal to or smaller than the maximum major diameter of the threaded portion(s). Headless items must have an external or internal wrenching feature or have a provision to facilitate turning. The item must be designed to exert pressure by screwing motion when used with a mechanical puller.
What is a Screw Thread Insert Inserter? 66 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Flat Tip Screwdriver Set? 18 Items: A Flat Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP) is a group of SCREWDRIVER, FLAT TIP having different characteristics.
What is a Terminal Crimping Tool Contact Positioner? 16 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 25 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is a Screw Thread Insert Tang Breakoff Tool? 37 Items: A Screw Thread Insert Tang Breakoff Tool (TANG BREAKOFF TOOL,SCREW THREAD INSERT) is a punch designed to fit within a coiled wire thread insert to manually or mechanically break off the tang by which the insert was threaded into the hole.
What is a Multiposition Vise? 11 Items: A Multiposition Vise (VISE,MULTIPOSITION) is a clamping device consisting of a workholding head and a base provided with swiveling, tilting, and locking arrangement. Designed to be bolt mounted to a bench, table, or the like and constructed so that the workholding head can be swiveled 360 degrees (6.3 radians) in a horizontal plane and tilted from a normal level position downward at least 90 degrees (1.6 radians), and locked in any desired position within the swiveling and tilting ranges. Intended for use in manufacturing and maintenance of mechanical and electronic parts and assemblies or any light bench work. See also VISE, PATTERNMAKER'S.
What is an Adjustable Wrench? 84 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 177 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 40 Items
Handle,Shovel 22 Items
What is a Torque Wrench Set? 13 Items: A Torque Wrench Set (WRENCH SET,TORQUE) is an assortment or two or more torque wrenches or various sizes. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH; and BIT, SCREWDRIVER.
What is a Retaining Ring Installation Tool? 12 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Bearing And Bushing Inserter? 626 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 59 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 466 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 23 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 18 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 80 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 23 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 12 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 12 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Seal Inserter And Remover? 42 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 158 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is an Electrical Contact Inserter And Remover? 21 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Pin Inserter? 28 Items: A Pin Inserter (INSERTER,PIN) is a hand tool designed to facilitate the insertion of a pin into a hole.
What is a Piston Inserter? 39 Items: A Piston Inserter (INSERTER,PISTON) is a tool designed to permit installation of a piston or piston assembly without damaging the packings or piston.
What is a Spring Inserter And Remover? 23 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 11 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Stud Inserter? 20 Items: A Stud Inserter (INSERTER,STUD) is a device designed to drive in studs. It does not have any facilities for removing or extracting studs. See also INSERTER AND REMOVER, STUD.
What is a Stud Inserter And Remover? 13 Items: A Stud Inserter And Remover (INSERTER AND REMOVER,STUD) is a group of items designed to extract and to drive studs. It may include collets, guides, housings, holders and the like. See also REMOVER SET, STUD and INSERTER, STUD.
What is a Gear Inserter? 10 Items: A Gear Inserter (INSERTER,GEAR) is a hand tool designed to install various gears onto a gearshaft. It may be operated by a pushing or a striking force.
What is a Crimping Tool Die? 145 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is an Electrical Connector Inserter? 10 Items: An Electrical Connector Inserter (INSERTER,ELECTRICAL CONNECTOR) is a hand tool designed to hold an electrical connector, and to assist in the positioning and installation of the connector on a cover, panel or the like.
What is a Float? 11 Items: A Float is a tool used for concrete, plastering and grouting work.
What is a Mechanical Puller Set? 19 Items: A Mechanical Puller Set (PULLER SET,MECHANICAL) is two or more separate PULLER, MECHANICAL of different fixed sizes.
What is a Lifting Pneumatic Bag? 28 Items: A Lifting Pneumatic Bag (PNEUMATIC BAG,LIFTING) is a device made of flexible material designed to lift another item by being placed under the item and being inflated with air or some other gas. It will have a means of being connected to an air or gas source and may include a connector hose, a control valve and/or a pressure regulator.
What is a Lifting Pneumatic Bag Kit? 12 Items: A Lifting Pneumatic Bag Kit (PNEUMATIC BAG KIT,LIFTING) is a collection of items consisting of two or more PNEUMATIC BAG, LIFTING, connecting cords, lanyards, feeding hoses and the like required for lifting an item when normal jacking conditions are not applicable. May include items for packaging the individual parts.
What is a Bearing Staking Installation Tool? 14 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
What is a Sealant Dispenser? 15 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Retaining Ring Pliers Set? 10 Items: A Retaining Ring Pliers Set (PLIERS SET,RETAINING RING) is a group of PLIERS, RETAINING RING having different characteristics.
What is a Pedal Adjustment Tool Compressor? 38 Items: A Pedal Adjustment Tool Compressor (COMPRESSOR,TOOL,PEDAL ADJUSTMENT) is a hand tool having hinged leverage handles designed to compress both ends of a spring to facilitate installation.
What is a Plug Electrical Connector Extractor? 20 Items: A Plug Electrical Connector Extractor (EXTRACTOR,ELECTRICAL CONNECTOR,PLUG) is a hand tool designed to disassemble CONNECTOR, PLUG, ELECTRICAL from a CONNECTOR, RECEPTACLE, ELECTRICAL.
What is a Screwdriver Handle? 12 Items: A Screwdriver Handle (HANDLE,SCREWDRIVER) is an item used to accommodate various types of BIT, SCREWDRIVER. It is designed to rotate a bit that is used for installing or removing screws.
What is a Wire Twister Pliers? 11 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 313 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is a Flat Tip And Cross Tip Screwdriver Set? 22 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is an Oil Filter Wrench? 14 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 442 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Rotating Members Aligning Tool? 29 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
Arm,Handling Tool 16 Items
What is a Splicing Sleeve Compressing Tool? 11 Items: A Splicing Sleeve Compressing Tool (COMPRESSING TOOL,SPLICING SLEEVE) is a hand tool having hinged leverage handles similar to a CUTTER, BOLT or pliers, designed to compress a splicing sleeve when joining the ends of two conductors, or when forming an eye splice in the end of a wire rope. Excludes CRIMPING TOOL, TERMINAL, HAND.
Handle,Hydraulic Jack 30 Items
What is a Manual Impact Wrench? 17 Items: A Manual Impact Wrench (WRENCH,IMPACT,MANUAL) is a manually operated handheld tool consisting of spring-loaded handle and a power-impact head which delivers a torsional impact from either continuous movement of the handle in one direction, or by a reciprocating action. It is used in tightening and loosening fasteners, such as bolts, nuts, and the like. The item may include sockets, extensions and offset fittings, nut runners, and the like.
What is a Torque Screwdriver? 15 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.

Stock Items From Supply Class 5120 Page 52 of 62

5120-12-181-6572
Montier- Dorn

121816572
1X56049493: RNCC: 3 | RNVC: 2

10 Dec 1979

5120-12-390-4439
Mounting Lever

123904439
F6271447: RNCC: 3 | RNVC: 2

13 Nov 2012

5120-12-313-7913
Ratchet Wrench

123137913
31KR19: RNCC: 3 | RNVC: 2
625 434: RNCC: 5 | RNVC: 2

5 May 1988

5120-12-133-4669

5120-12-092-4411

5120-12-349-3754
Torque Wrench

123493754
591801-9103.000: RNCC: 3 | RNVC: 2

5 Nov 1999

5120-12-385-2909
Grommet Inserting Punch And Die

123852909
50.000.046: RNCC: 3 | RNVC: 2

18 May 2011

5120-12-367-6327
Hand Beading Tool

123676327
TUB VBG642: RNCC: 3 | RNVC: 2

15 Sep 2005

5120-12-123-5187

5120-12-341-4682
Mechanical Puller

123414682
5115-0000: RNCC: 3 | RNVC: 2

6 Sep 1996

5120-12-314-7029
Schluessel

123147029
B11.49028-0426: RNCC: 3 | RNVC: 2
11.49028-0426: RNCC: 5 | RNVC: 2
11.49028-0426: RNCC: 5 | RNVC: 2

30 Jul 1988

5120-12-381-7912
Mechanical Puller

123817912
598101-990007.000.0: RNCC: 2 | RNVC: 2
598101-990007.000.0: RNCC: 5 | RNVC: 2

31 Mar 2010

5120-12-350-2561
Bl Ausbeulwerkzeug

123502561
320/2: RNCC: 3 | RNVC: 2

8 Mar 2000

5120-12-317-4329
Flat Tip Screwdriver

123174329
4722-5: RNCC: 3 | RNVC: 2
07485: RNCC: 3 | RNVC: 9

6 Apr 1989

5120-12-317-9347
Flat Tip Screwdriver

123179347
122-4,5X90: RNCC: 3 | RNVC: 9

26 May 1989

5120-12-300-4641
Hydra Aufnahmeteil

123004641
23176-262146.00.0: RNCC: 2 | RNVC: 2
23176-262146.00.0: RNCC: 3 | RNVC: 2

3 Aug 1984

5120-12-322-7693
Mechanical Puller

123227693
05.001.05.02.0: RNCC: 3 | RNVC: 2
0738199: RNCC: 5 | RNVC: 2

19 Sep 1990

5120-12-193-9157
Torque Wrench

121939157
TL5120-0085-020: RNCC: 2 | RNVC: 2
730V/2BW: RNCC: 3 | RNVC: 2
001589752100: RNCC: 5 | RNVC: 9
6260420015+6263410001: RNCC: 5 | RNVC: 9
6285CT+6412: RNCC: 5 | RNVC: 9
730V/2: RNCC: 5 | RNVC: 9
5120-01162: RNCC: 6 | RNVC: 9

13 Sep 1982

5120-12-123-5407
Box Wrench

121235407
NO PRIMARY REF 12-123-5407: RNCC: 3 | RNVC: 2
236845: RNCC: 5 | RNVC: 9
4-7X9: RNCC: 5 | RNVC: 9
4-7X9: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-362-7729
Brake Shoe Adjusting Tool

123627729
2 0078-026: RNCC: 3 | RNVC: 2
2 0078-026: RNCC: 5 | RNVC: 2
20078-026: RNCC: 5 | RNVC: 2
20078-026: RNCC: 5 | RNVC: 9

30 Mar 2004

5120-12-343-6367
Socket Wrench Handle

123436367
9842-265: RNCC: 3 | RNVC: 2

10 Jul 1997

5120-12-159-4916
Open End Wrench

121594916
285-705-390-000: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-324-6608
Hand Beading Tool

123246608
VN209-8: RNCC: 3 | RNVC: 2
MOV1-030615-8: RNCC: 5 | RNVC: 2

12 Mar 1991

5120-12-124-2385
Craftsman's Tweezers

121242385
TL5120-0109-E010: RNCC: 2 | RNVC: 2
1452: RNCC: 3 | RNVC: 2
9385-125-S: RNCC: 3 | RNVC: 2
3700433: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-181-1349
Endkappe

121811349
P-895267-001: RNCC: 3 | RNVC: 2
P895267-001: RNCC: 5 | RNVC: 2

29 Oct 1979

5120-12-330-7072
Blindni Mundstueck

123307072
10/29: RNCC: 3 | RNVC: 2

28 Jan 1993

5120-12-370-5551
Craftsman's Tweezers

123705551
922212: RNCC: 3 | RNVC: 2
00.18.97.54: RNCC: 5 | RNVC: 2
4003773054696: RNCC: 5 | RNVC: 2

21 Nov 2006

5120-12-365-9157
Swivel Knob Jeweler's Screwdriver

123659157
T4877X 04: RNCC: 3 | RNVC: 2

17 Feb 2005

5120-12-321-6659
Mechanical Puller Forcing Screw

123216659
1402450: RNCC: 3 | RNVC: 2
1402450-4: RNCC: 5 | RNVC: 9
1402450/4: RNCC: 5 | RNVC: 9

13 Jun 1990

5120-12-338-1288
Socket Head Screw Key

123381288
115503: RNCC: 3 | RNVC: 2
981330: RNCC: 3 | RNVC: 2
3930110009: RNCC: 5 | RNVC: 9
828VDE-3: RNCC: 5 | RNVC: 9

29 May 1995

5120-12-350-2685
Swivel Knob Jeweler's Screwdriver Set

123502685
2003F/5-2: RNCC: 3 | RNVC: 2
1812591: RNCC: 5 | RNVC: 2

9 Mar 2000

5120-12-389-2383
Pipe Mounting Tool

123892383
4910025-000.01: RNCC: 2 | RNVC: 2
4910025-000.01: RNCC: 3 | RNVC: 2

12 Jun 2012

5120-12-368-7469
Socket Wrench Screwdriver Attachment

123687469
3520-PH 3: RNCC: 3 | RNVC: 2
00.47.44.88: RNCC: 5 | RNVC: 2

12 Apr 2006

5120-12-305-8597
Mechan Druckstueck

123058597
4900059-752020.000.0: RNCC: 2 | RNVC: 2
4900059-752020.000.0: RNCC: 3 | RNVC: 2

27 Dec 1985

5120-12-322-2988
Hand Beading Tool

123222988
844601889: RNCC: 3 | RNVC: 2

9 Aug 1990

5120-12-379-2381
Eastern Pattern Scoop

123792381
06070504: RNCC: 3 | RNVC: 2

7 Jul 2009

5120-12-134-2643
Schluessel

121342643
027M03100: RNCC: 3 | RNVC: 2
VM42137: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-134-2756

5120-12-130-4096
Mechanical Puller

121304096
NO PRIMARY REF 12-130-4096: RNCC: 3 | RNVC: 2
501-31-802-0: RNCC: 5 | RNVC: 9
50131802-0: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-155-0185
Flat Tip Screwdriver

121550185
8030-6-25: RNCC: 3 | RNVC: 2
7060-1: RNCC: 3 | RNVC: 2
5M8936-221-38: RNCC: 5 | RNVC: 2
131542: RNCC: 5 | RNVC: 2
8030-1X6X25: RNCC: 5 | RNVC: 2
261215011016: RNCC: 5 | RNVC: 2
1149VP6: RNCC: 5 | RNVC: 9
17304: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-126-2192
Yarning Iron

121262192
NO PRIMARY REF 12-126-2192: RNCC: 3 | RNVC: 2
5180-085-53ITEM2MM: RNCC: 5 | RNVC: 9
TL5180-0085-53ITEM2MM: RNCC: 5 | RNVC: 9
2240-2: RNCC: 5 | RNVC: 9
5180-0085-53ITEM2MM: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-346-9206
Socket Head Screw Key

123469206
9814-10: RNCC: 3 | RNVC: 9

28 Sep 1998

5120-12-373-8883
Fuehrungs- Platte

123738883
80996020176: RNCC: 3 | RNVC: 2
80.99602-0176: RNCC: 5 | RNVC: 2

17 Dec 2007

5120-12-123-5522
Socket Wrench

121235522
DIN659-8: RNCC: 2 | RNVC: 2
8DIN659: RNCC: 3 | RNVC: 2
8DIN659: RNCC: 5 | RNVC: 2
5168K8: RNCC: 5 | RNVC: 9
8DIN659GALNI8: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-393-6759
Bearing And Bushing Inserter

123936759
031.127.0-3: RNCC: 3 | RNVC: 2
3155435: RNCC: 5 | RNVC: 2
03155435: RNCC: 5 | RNVC: 2

1 Oct 2013

5120-12-305-2918
Ratchet Lever Puller Handle

123052918
313285/0: RNCC: 3 | RNVC: 2

17 Oct 1985

5120-12-126-1701
Blacksmith's Anvil

121261701
14167: RNCC: 3 | RNVC: 2
00.11.16.49: RNCC: 5 | RNVC: 2
57159-4: RNCC: 5 | RNVC: 9
57159040: RNCC: 5 | RNVC: 9
14167: RNCC: 5 | RNVC: 9
7-2H0RN: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-307-1624
Screwdriver Bit

123071624
TL5120-0132-G7: RNCC: 2 | RNVC: 2
3245-TX50: RNCC: 3 | RNVC: 2
992-T50: RNCC: 3 | RNVC: 2
54TX-T50: RNCC: 3 | RNVC: 2
ITX19-T50: RNCC: 3 | RNVC: 2
00.50.26.79: RNCC: 5 | RNVC: 2
11722: RNCC: 5 | RNVC: 2
03100050: RNCC: 5 | RNVC: 2
2487130007: RNCC: 5 | RNVC: 9
INXT19-50: RNCC: 5 | RNVC: 9

15 May 1986

5120-12-343-5232
Bearing And Bushing Inserter And Remover

123435232
V1409-T600: RNCC: 3 | RNVC: 2
V1409-T600: RNCC: 5 | RNVC: 2

1 Jul 1997

5120-12-173-4216
Socket Wrench

121734216
DIN896-A14X15: RNCC: 2 | RNVC: 2
530-14X15: RNCC: 3 | RNVC: 2
00530141582: RNCC: 5 | RNVC: 2
A14X15DIN896: RNCC: 5 | RNVC: 9

13 Apr 1978

5120-12-364-6779
Socket Wrench Handle

123646779
11100001-TCS: RNCC: 3 | RNVC: 2

20 Oct 2004

5120-12-359-4488
Open End Wrench

123594488
52.3218.043.08: RNCC: 3 | RNVC: 2

5 Feb 2003

5120-12-198-6574
Aufweit Spannbacke

121986574
234 101: RNCC: 3 | RNVC: 2

17 Feb 1984

5120-12-021-2462

5120-12-367-6876
Driftpin

123676876
EL200: RNCC: 3 | RNVC: 2
T623P30T0001: RNCC: 5 | RNVC: 2

27 Sep 2005

5120-12-152-7865
Hand Blind Riveter

121527865
NT3: RNCC: 3 | RNVC: 2
GESNT3: RNCC: 5 | RNVC: 2
GESIPANT3: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-187-3209
Spanner Wrench

121873209
01.02.01.04: RNCC: 3 | RNVC: 2

27 Mar 1981

5120-12-385-4459
Caulking Gun

123854459
53.000.057: RNCC: 3 | RNVC: 2
53.000.057: RNCC: 5 | RNVC: 2

6 Jun 2011

5120-12-184-4746
Face Spanner Wrench Socket

121844746
1410101A11A294001013: RNCC: 3 | RNVC: 2

29 Jul 1980

5120-12-174-1581
Slip Joint Pliers

121741581
C2615N: RNCC: 3 | RNVC: 9
131355: RNCC: 5 | RNVC: 2

7 Jun 1978

5120-12-326-5289
Bearing And Bushing Inserter

123265289
4900326: RNCC: 3 | RNVC: 2

1 Oct 1991

5120-12-322-9502
Socket Head Screw Key

123229502
DIN911-7L: RNCC: 2 | RNVC: 2

10 Oct 1990

5120-12-151-6510
Schw Ring Einsatz

121516510
23111-7156.04: RNCC: 2 | RNVC: 2
23111-7156.04: RNCC: 3 | RNVC: 2
23111-7156-04: RNCC: 5 | RNVC: 9
23111-7156.04: RNCC: 5 | RNVC: 9
23111-7156-04: RNCC: 5 | RNVC: 9
23111-7156-04: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-127-9027
Blacksmith's Anvil

121279027
NO PRIMARY REF 12-127-9027: RNCC: 3 | RNVC: 2
175-2H0RNSTAUCH: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-133-3953
Screwdriver Bit

121333953
05056315001: RNCC: 3 | RNVC: 2
840/1Z3X25: RNCC: 5 | RNVC: 2
056315: RNCC: 5 | RNVC: 9
840-1 SW 3: RNCC: 5 | RNVC: 9
840-1-3: RNCC: 5 | RNVC: 9
7761-03: RNCC: 5 | RNVC: 9
6990M3: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-306-8050
Seal Inserter

123068050
9998626: RNCC: 3 | RNVC: 2
SE296400A: RNCC: 5 | RNVC: 2
100/70 SE 296400: RNCC: 5 | RNVC: 9
81761264: RNCC: 5 | RNVC: 9

3 Apr 1986

5120-12-195-2636
Socket Wrench Socket

121952636
420 6564: RNCC: 3 | RNVC: 2
4206564: RNCC: 3 | RNVC: 2
C7800 10: RNCC: 3 | RNVC: 2

31 Jan 1983

5120-12-309-0804
Spanner Wrench

123090804
5100257: RNCC: 2 | RNVC: 2

11 Dec 1986

5120-12-319-6371
Montage- Hebel

123196371
51-938.0: RNCC: 3 | RNVC: 2

19 Oct 1989

5120-12-021-2586

5120-12-345-6484
Screwdriver Bit Set

123456484
ITX19LKP: RNCC: 3 | RNVC: 2

7 Apr 1998

5120-12-364-6760
Flat Tip Screwdriver

123646760
48201100-TCS: RNCC: 3 | RNVC: 2

20 Oct 2004

5120-12-358-2739
Torque Wrench Adapter

123582739
8547007: RNCC: 3 | RNVC: 2

7 Oct 2002

5120-12-304-0569
Socket Wrench

123040569
A21H715: RNCC: 3 | RNVC: 2
0116 5898: RNCC: 5 | RNVC: 2
1165898: RNCC: 5 | RNVC: 2
H715,A21: RNCC: 5 | RNVC: 2

4 Jun 1985

5120-12-132-1110

5120-12-137-6804
Torque Wrench

121376804
NO PRIMARY REF 12-137-6804: RNCC: 3 | RNVC: 2
50410006: RNCC: 5 | RNVC: 9
72A6: RNCC: 5 | RNVC: 9
5120-01172: RNCC: 6 | RNVC: 9

30 May 1969

5120-12-382-5217
Mounting To Sleeve

123825217
VG96966-03W1: RNCC: 2 | RNVC: 2
F08-91-3-00-0000: RNCC: 3 | RNVC: 2

1 Jul 2010

5120-12-314-2326
Boerdelwer Einsatz

123142326
1651A/5/16: RNCC: 3 | RNVC: 2
4597-51-A5/16: RNCC: 3 | RNVC: 2
569933: RNCC: 5 | RNVC: 2
68440020: RNCC: 5 | RNVC: 2
1651A5/16": RNCC: 5 | RNVC: 9

17 Jun 1988

5120-12-123-5950
Socket Wrench Crowfoot Attachment

121235950
AN8508-29: RNCC: 3 | RNVC: 2
1950Z1-13-16: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-369-2498
Socket Head Screw Key Set

123692498
225-288-51: RNCC: 3 | RNVC: 2
00.41.01.27: RNCC: 5 | RNVC: 2

9 Jun 2006

5120-12-327-7174
Gewindeein Spindel

123277174
01500677620: RNCC: 3 | RNVC: 2
0150 0677 620: RNCC: 5 | RNVC: 2
0150-0677-620: RNCC: 5 | RNVC: 2

24 Feb 1992

5120-12-368-4073
Dreh Haltewerkzeug

123684073
311011: RNCC: 3 | RNVC: 2
0852-04-13-00/35: RNCC: 5 | RNVC: 2

7 Mar 2006

5120-12-363-9555
Bearing And Bushing Inserter

123639555
T671P5002117: RNCC: 3 | RNVC: 2

6 Aug 2004

5120-12-373-3762
Mechanical Puller

123733762
L133M6204101: RNCC: 3 | RNVC: 2

26 Oct 2007

5120-12-359-3174
Socket Wrench

123593174
6726190: RNCC: 3 | RNVC: 2

23 Jan 2003

5120-12-325-5964
Hand Tube Bender

123255964
55550200: RNCC: 3 | RNVC: 9
63082002: RNCC: 3 | RNVC: 9
57560025: RNCC: 3 | RNVC: 9

20 Jun 1991

5120-12-384-3306
Swivel Knob Jeweler's Screwdriver

123843306
00524: RNCC: 3 | RNVC: 2
263P-2,5X60: RNCC: 5 | RNVC: 2
751721361109: RNCC: 6 | RNVC: 9

14 Feb 2011

5120-12-156-9978
Spanner Wrench

121569978
5800875-424: RNCC: 3 | RNVC: 2
5800875-424: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-362-5423
Solid Center Punch

123625423
54.0084.960.76: RNCC: 3 | RNVC: 2
3643-120: RNCC: 5 | RNVC: 2

5 Mar 2004

5120-12-121-8257
Open End Wrench

121218257
200-12X13: RNCC: 3 | RNVC: 2
620-12X13: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-350-3249
Drive Pin Punch

123503249
5600023-990000.002.0: RNCC: 2 | RNVC: 2
5600023-990000.002.0: RNCC: 3 | RNVC: 2

15 Mar 2000

5120-12-139-3154
Rille Montiereisen

121393154
4816-1: RNCC: 3 | RNVC: 2
0005891431: RNCC: 3 | RNVC: 2
000589143100: RNCC: 5 | RNVC: 2
038M02200: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-134-2736
S Stemmvorrichtung

121342736
041M01100: RNCC: 3 | RNVC: 2
VM74001: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-367-5891
Socket Head Screw Key

123675891
10047: RNCC: 3 | RNVC: 2

7 Sep 2005

5120-12-168-6350

5120-12-358-6270
Mechanical Puller

123586270
111430: RNCC: 3 | RNVC: 2

30 Oct 2002

5120-12-319-9816
Rivet Bucking Bar

123199816
760B2: RNCC: 3 | RNVC: 2

24 Nov 1989

5120-12-189-8374
Montagegestell

121898374
0276 189 000: RNCC: 3 | RNVC: 2

21 Oct 1981

5120-12-347-9660
Mechanical Puller

123479660
80996026000: RNCC: 3 | RNVC: 2
80.99602.6000: RNCC: 5 | RNVC: 2

17 Mar 1999

5120-12-390-2461
Mechanical Puller Attachment

123902461
F30452739: RNCC: 3 | RNVC: 2

22 Oct 2012

5120-12-023-3437

5120-12-161-5810
Socket Head Screw Key

121615810
1712180135: RNCC: 3 | RNVC: 2
17121 80135: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-194-4461
Open End Wrench

121944461
18-781: RNCC: 3 | RNVC: 2

3 Nov 1982

5120-12-700-6684
Hand Hydraulic Jack

127006684
54-60034513516: RNCC: 2 | RNVC: 2

6 Oct 1992

5120-12-362-5179
Solid Center Punch

123625179
54.0084.960.75: RNCC: 3 | RNVC: 2
3643-100: RNCC: 5 | RNVC: 2

4 Mar 2004

5120-12-142-0270
Abzieher Haken

121420270
557: RNCC: 3 | RNVC: 2
TS5120-0657-557: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-193-0247
Socket Wrench Adapter

121930247
NM 303-54: RNCC: 3 | RNVC: 2
NM303-54: RNCC: 5 | RNVC: 2
NM 303-54: RNCC: 5 | RNVC: 9
NM303-54: RNCC: 5 | RNVC: 9

15 Jun 1982

5120-12-182-4731
Torque Wrench Adapter

121824731
TL5120-0086-970: RNCC: 2 | RNVC: 2
30/DC-3/8: RNCC: 3 | RNVC: 2
735/5: RNCC: 3 | RNVC: 2
65760-1-3/8: RNCC: 5 | RNVC: 9
7452-1: RNCC: 5 | RNVC: 9
6263400001: RNCC: 5 | RNVC: 9
6402: RNCC: 5 | RNVC: 9
6402-1: RNCC: 5 | RNVC: 9
F3 0027339: RNCC: 5 | RNVC: 9
735-5: RNCC: 5 | RNVC: 9

6 Feb 1980

5120-12-330-6997
Socket Wrench Socket

123306997
2530: RNCC: 3 | RNVC: 2
2530-3/8: RNCC: 5 | RNVC: 2
5719750028: RNCC: 5 | RNVC: 2
VW128: RNCC: 5 | RNVC: 2

28 Jan 1993

5120-12-130-7196
Socket Wrench Set

121307196
NO PRIMARY REF 12-130-7196: RNCC: 3 | RNVC: 2
105408: RNCC: 5 | RNVC: 9
1945UZ: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-327-9109
Socket Wrench Socket

123279109
402A-5/16: RNCC: 3 | RNVC: 2
A6710DZ-5/16: RNCC: 3 | RNVC: 2
1757496: RNCC: 5 | RNVC: 2
01 54 00 20: RNCC: 5 | RNVC: 2
175749: RNCC: 5 | RNVC: 2

19 Mar 1992

5120-12-143-9487
Montagewerkzeug

121439487
1013-101W9: RNCC: 2 | RNVC: 2
1013-101W9: RNCC: 5 | RNVC: 2
1013-101W9: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-177-2195

5120-12-133-3038

5120-12-188-7011
Zugstange

121887011
100278-71010.00.0: RNCC: 2 | RNVC: 2
100278-71010.00.0: RNCC: 3 | RNVC: 2
100278-71010.00.0: RNCC: 5 | RNVC: 9
100278-71010-00-0: RNCC: 5 | RNVC: 9

27 Jul 1981

5120-12-388-8086
Spanner Wrench

123888086
51227: RNCC: 3 | RNVC: 2
12910-3: RNCC: 3 | RNVC: 2
44010003: RNCC: 5 | RNVC: 2
771C-95-165: RNCC: 5 | RNVC: 2
4018754029693: RNCC: 5 | RNVC: 2

24 Apr 2012

5120-12-330-9514
Swivel Knob Jeweler's Screwdriver

123309514
DIN8320-A0,23X0,7: RNCC: 2 | RNVC: 2
TVA5120-2-263-039-1.1.4: RNCC: 5 | RNVC: 2

2 Mar 1993

5120-12-360-3225
Ausdrueckwerkzeug

123603225
AWZ-B: RNCC: 3 | RNVC: 2
AWZ2,3: RNCC: 5 | RNVC: 2

8 May 2003

5120-12-305-6362
Spanner Wrench

123056362
4W693-A: RNCC: 3 | RNVC: 2
4W693A: RNCC: 5 | RNVC: 9
4W693-A: RNCC: 5 | RNVC: 9

28 Nov 1985

5120-12-189-8591
Ein- Und Ausbauwerk

121898591
P-896758-403: RNCC: 3 | RNVC: 2
P-896758-405: RNCC: 5 | RNVC: 2
P-896758-407: RNCC: 5 | RNVC: 2
P896758-405: RNCC: 5 | RNVC: 2
P896758-403: RNCC: 5 | RNVC: 2
P896758-407: RNCC: 5 | RNVC: 2
MAGERD 6311: RNCC: 5 | RNVC: 9

22 Oct 1981

5120-12-301-2714
Open End Wrench

123012714
6-1.11/16X1.7/8AF: RNCC: 3 | RNVC: 2
6-1.11/16X1.7/8: RNCC: 5 | RNVC: 2
607320: RNCC: 5 | RNVC: 2

2 Oct 1984

5120-12-187-3368
Socket Wrench Socket

121873368
50-12-BSW3/4: RNCC: 3 | RNVC: 2
TVA5120-2-264-14L: RNCC: 5 | RNVC: 1
TVA5120-2-5-532: RNCC: 5 | RNVC: 1
00050071383: RNCC: 5 | RNVC: 2
TVA5120-2-5-532/12,5X3/4BSW: RNCC: 5 | RNVC: 2
TVA5120-2-264014L-12,5X3/4BSW: RNCC: 5 | RNVC: 2
900WZ3-4: RNCC: 5 | RNVC: 9
50E3/4: RNCC: 5 | RNVC: 9
900WZ3/4: RNCC: 5 | RNVC: 9

30 Mar 1981

5120-12-129-5634
Hand Tamper

121295634
3895-002SEC2-1-11: RNCC: 2 | RNVC: 2
637K001-200X200: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-149-8074
Stanz- Stempelsatz

121498074
TL5120-0059-14: RNCC: 2 | RNVC: 2
10: RNCC: 3 | RNVC: 2
705201100: RNCC: 5 | RNVC: 2
5120-0059-17: RNCC: 5 | RNVC: 9
5120-059-17: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-345-6397
Box Wrench

123456397
2300211-991013.000.0: RNCC: 2 | RNVC: 2
2300211-991013.000.0: RNCC: 3 | RNVC: 2

7 Apr 1998

5120-12-317-0127
Drive Pin Punch

123170127
8-7301.00: RNCC: 2 | RNVC: 2
8-7301.00: RNCC: 3 | RNVC: 2
9861565: RNCC: 5 | RNVC: 2
9861565: RNCC: 5 | RNVC: 9
8-7301.00: RNCC: 5 | RNVC: 9

3 Mar 1989

5120-12-358-1455
Cross Tip Screwdriver

123581455
6133221: RNCC: 3 | RNVC: 2
613 322 1: RNCC: 5 | RNVC: 2

18 Sep 2002

5120-12-385-6334
Socket Head Screw Key

123856334
DIN7439-3: RNCC: 2 | RNVC: 9

22 Jun 2011

5120-12-134-2655
Mechanical Puller

121342655
004M01300: RNCC: 3 | RNVC: 2
VM73834: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-387-2583
Retaining Ring Pliers

123872583
002.165: RNCC: 3 | RNVC: 2

21 Nov 2011

5120-12-364-9794
Hand Terminal Crimping Tool

123649794
3-0602: RNCC: 3 | RNVC: 2

19 Nov 2004

5120-12-313-4263
Lager- Und Einsatz

123134263
80996040069: RNCC: 3 | RNVC: 2
80.99604.0069: RNCC: 5 | RNVC: 2

30 Mar 1988

5120-12-362-0709
Schluessel

123620709
335969-9015.000: RNCC: 3 | RNVC: 2
3359699015000: RNCC: 5 | RNVC: 2

6 Jan 2004

5120-12-130-9338
Socket Wrench Socket

121309338
NO PRIMARY REF 12-130-9338: RNCC: 3 | RNVC: 2
109575: RNCC: 5 | RNVC: 9
7420Z1-4: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-322-8771
Bearing And Bushing Inserter

123228771
VM0 6899-9242: RNCC: 3 | RNVC: 2
0009419360: RNCC: 5 | RNVC: 2

1 Oct 1990

5120-12-330-3655
Torque Wrench Adapter

123303655
2653-991410.00: RNCC: 2 | RNVC: 2
2653-991410.00: RNCC: 3 | RNVC: 2

8 Dec 1992

5120-12-321-4469
Combination Box And Open End Wrench

123214469
54.0062.820.10: RNCC: 3 | RNVC: 2

21 May 1990

5120-12-139-3013

5120-12-315-3879
Face Spanner Wrench Socket

123153879
503652: RNCC: 3 | RNVC: 2

19 Oct 1988

5120-12-369-0198
Socket Wrench

123690198
KA 030 262: RNCC: 3 | RNVC: 2

15 May 2006

5120-12-135-5974

5120-12-380-6117
Aligning Punch

123806117
F30376660: RNCC: 3 | RNVC: 2
F30376 660: RNCC: 5 | RNVC: 2
(7001)123806117: RNCC: 5 | RNVC: 2

12 Nov 2009

5120-12-335-4110
Socket Wrench Socket

123354110
0852 5031: RNCC: 3 | RNVC: 2
8525031: RNCC: 5 | RNVC: 2

17 Aug 1994

5120-12-357-2283
Duese Reiniger

123572283
0986611152: RNCC: 3 | RNVC: 2

23 May 2002

5120-12-385-2595
Hand-Operated Grommet And Eyelet Press

123852595
50.000.051: RNCC: 3 | RNVC: 2

13 May 2011

5120-12-385-5980
Mechanical Puller Attachment

123855980
F6780517: RNCC: 3 | RNVC: 2

20 Jun 2011

5120-12-364-4552
Mechanical Puller Attachment

123644552
T661P1002219: RNCC: 3 | RNVC: 2

29 Sep 2004

5120-12-364-1727
Driftpin

123641727
F30379895: RNCC: 3 | RNVC: 2

27 Aug 2004

5120-12-167-9686
Spanner Wrench

121679686
335914-9011.000: RNCC: 2 | RNVC: 2
335914-9011.000: RNCC: 3 | RNVC: 2
1255-31000W8: RNCC: 5 | RNVC: 2
335914-9011.000: RNCC: 5 | RNVC: 9
1255-31000W8: RNCC: 5 | RNVC: 9
335914-9011.000: RNCC: 5 | RNVC: 9
335914-9011.000: RNCC: 8 | RNVC: 2

7 Feb 1977

5120-12-133-3718

5120-12-320-1052
Lager- Und Einsatz

123201052
99366649: RNCC: 3 | RNVC: 2

7 Dec 1989

5120-12-196-5416
Socket Wrench Screwdriver Attachment

121965416
61209200: RNCC: 3 | RNVC: 2
54IC-6: RNCC: 3 | RNVC: 2
766C-6: RNCC: 3 | RNVC: 9
42410: RNCC: 5 | RNVC: 2
64340 6: RNCC: 5 | RNVC: 2
643400-6: RNCC: 5 | RNVC: 2
03070006: RNCC: 5 | RNVC: 2
993-6: RNCC: 5 | RNVC: 9

18 Jul 1983

5120-12-372-7560
Ausdrueckwerkzeug

123727560
7 032 110 011: RNCC: 3 | RNVC: 2
304318: RNCC: 5 | RNVC: 2

17 Aug 2007

5120-12-346-9202
Box Wrench

123469202
2-38X42: RNCC: 3 | RNVC: 2

28 Sep 1998

5120-12-171-4511
Hand Hydraulic Jack

121714511
TL5120-0090-40: RNCC: 2 | RNVC: 2
14.546.7: RNCC: 3 | RNVC: 2
ADX30-370: RNCC: 5 | RNVC: 2
HUD3-5-370: RNCC: 5 | RNVC: 2
0005838815: RNCC: 5 | RNVC: 2
077-44-1070: RNCC: 5 | RNVC: 2
12009-0: RNCC: 5 | RNVC: 2
305347.4: RNCC: 5 | RNVC: 2

13 Oct 1977

5120-12-166-1976
Einpreszwerkzeug

121661976
23303-266600.00: RNCC: 3 | RNVC: 2
23303-266600-00: RNCC: 3 | RNVC: 2
8207588: RNCC: 5 | RNVC: 2

12 Aug 1976

5120-12-153-7193
Aufhaengeplatte

121537193
CH2522-15NM: RNCC: 3 | RNVC: 2
561589003100: RNCC: 5 | RNVC: 2
5615890031/00: RNCC: 5 | RNVC: 2
CH2522-15NM: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-305-7872
Bearing And Bushing Inserter

123057872
TK-BA35-5120-462: RNCC: 2 | RNVC: 2
113532: RNCC: 3 | RNVC: 2
113532: RNCC: 5 | RNVC: 9

13 Dec 1985

5120-12-362-0063
Spanner Wrench

123620063
760-10: RNCC: 3 | RNVC: 2
40907: RNCC: 5 | RNVC: 2

16 Dec 2003

5120-12-367-8282
Open End Wrench

123678282
DIN895-16X18: RNCC: 2 | RNVC: 2
N 000895016001: RNCC: 5 | RNVC: 2

20 Oct 2005

5120-12-173-2922
Flat Tip Screwdriver

121732922
178586: RNCC: 3 | RNVC: 9
147-12: RNCC: 3 | RNVC: 9
52730275: RNCC: 5 | RNVC: 9
110817: RNCC: 5 | RNVC: 9
148-N12: RNCC: 5 | RNVC: 9
9710-2,0X12X210: RNCC: 5 | RNVC: 9
9710-200X11: RNCC: 5 | RNVC: 9
9710-7: RNCC: 5 | RNVC: 9
9710-7-1-6X11X200: RNCC: 5 | RNVC: 9

3 Apr 1978

5120-12-393-6585
Me Puller Carrier

123936585
A-0261-005-01: RNCC: 3 | RNVC: 2

30 Sep 2013

5120-12-133-3616
Open End Wrench

121333616
NO PRIMARY REF 12-133-3616: RNCC: 3 | RNVC: 2
105815: RNCC: 5 | RNVC: 9
1953M18X19: RNCC: 5 | RNVC: 9
1953M 18 X 19: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-350-8583
Torque Wrench

123508583
08542345.003: RNCC: 3 | RNVC: 2
08549082.001: RNCC: 5 | RNVC: 9

30 May 2000

5120-12-140-8980
Spanner Wrench

121408980
10079: RNCC: 3 | RNVC: 2
10079: RNCC: 5 | RNVC: 2
10079: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-010-9822

5120-12-374-3901
Torque Wrench Adapter

123743901
58211013-TCS: RNCC: 3 | RNVC: 2

13 Feb 2008

5120-12-368-7159
Socket Wrench Socket

123687159
900Z-8: RNCC: 3 | RNVC: 2
50-8: RNCC: 3 | RNVC: 2
770-L 8: RNCC: 3 | RNVC: 2
7800DM-8: RNCC: 3 | RNVC: 2
D19-8: RNCC: 3 | RNVC: 2
03010008: RNCC: 5 | RNVC: 2
00.47.98.45: RNCC: 5 | RNVC: 2
1830854: RNCC: 5 | RNVC: 2
6133040: RNCC: 5 | RNVC: 2

10 Apr 2006

5120-12-130-3385

5120-12-181-5053
Spanner Wrench

121815053
312589080700: RNCC: 3 | RNVC: 9

26 Nov 1979

5120-12-197-7555
Seal Inserter

121977555
1X56137124: RNCC: 3 | RNVC: 2
620589001500: RNCC: 3 | RNVC: 2
80.99617-0102: RNCC: 5 | RNVC: 2
80996170102: RNCC: 5 | RNVC: 2
ZF 1X56 137124: RNCC: 5 | RNVC: 2
8220913: RNCC: 5 | RNVC: 2
8475521: RNCC: 5 | RNVC: 2
620 589 00 15 00: RNCC: 5 | RNVC: 2
0694780: RNCC: 5 | RNVC: 2

21 Nov 1983

5120-12-181-3537
Open End Wrench

121813537
DIN3114-46: RNCC: 2 | RNVC: 2
0830: RNCC: 5 | RNVC: 2
46DIN3114: RNCC: 5 | RNVC: 2

14 Nov 1979

5120-12-350-4813
Zentrier- Ring

123504813
26-21C1360G003P2: RNCC: 3 | RNVC: 2

5 Apr 2000

5120-12-130-7136
Flat Tip Screwdriver

121307136
234V6-200: RNCC: 3 | RNVC: 9

30 May 1969

5120-12-168-5146
Hebelarm

121685146
VG95211-ML-121685146: RNCC: 2 | RNVC: 2
160-88507-11: RNCC: 3 | RNVC: 2
160-88507-11: RNCC: 5 | RNVC: 9

18 Mar 1977

5120-12-177-2788
Abziehv Druckplatte

121772788
2300002-269030.001: RNCC: 2 | RNVC: 2
2300002-269030.001: RNCC: 3 | RNVC: 2
2300002-269030-001: RNCC: 5 | RNVC: 9
2300002-269030.001: RNCC: 5 | RNVC: 9

24 Jan 1979

5120-12-343-3806
Mechanical Puller Attachment

123433806
4D0 012 243: RNCC: 3 | RNVC: 2

12 Jun 1997

5120-12-133-4501

5120-12-121-6482
Hammer Handle

121216482
DIN5111-X-400-B-ES-LACKIERT: RNCC: 2 | RNVC: 2
46-400,ESCHE,GERADE: RNCC: 3 | RNVC: 2
00.76.32.66: RNCC: 5 | RNVC: 2
19-400: RNCC: 5 | RNVC: 9
400DIN5111: RNCC: 5 | RNVC: 9
400DIN5111BLACKIERT: RNCC: 5 | RNVC: 9
DIN5111-400BLACKIERT: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-353-4476
An Montierwerkzeug

123534476
S27013/01-4-2-9-2: RNCC: 3 | RNVC: 2

26 Mar 2001

5120-12-332-3489
Torque Wrench Adapter

123323489
VV732/93: RNCC: 3 | RNVC: 2

2 Aug 1993

5120-12-174-6762
Socket Wrench

121746762
11 0880: RNCC: 3 | RNVC: 9
110880: RNCC: 3 | RNVC: 9
4508-1A: RNCC: 5 | RNVC: 9

19 Jul 1978

5120-12-181-1576
Screwdriver Bit

121811576
1094-4: RNCC: 3 | RNVC: 2

29 Oct 1979

5120-12-357-5217
Torque Wrench

123575217
6981A: RNCC: 3 | RNVC: 2
1807863: RNCC: 5 | RNVC: 2
6981 A: RNCC: 5 | RNVC: 2

27 Jun 2002

5120-12-304-6138
Hand Hammer

123046138
50552-8-0: RNCC: 3 | RNVC: 2
10970-1 1/2: RNCC: 3 | RNVC: 2
7100007: RNCC: 3 | RNVC: 2
50563-3-0: RNCC: 5 | RNVC: 2
70120004: RNCC: 5 | RNVC: 2

5 Aug 1985

5120-12-300-4640
Hydra Aufnahmeteil

123004640
23176-262145.00.0: RNCC: 3 | RNVC: 2

3 Aug 1984

5120-12-354-9943
W Spannvorrichtung

123549943
80996066076: RNCC: 3 | RNVC: 2
WW2 S250 10: RNCC: 5 | RNVC: 2

18 Sep 2001

5120-12-345-3357
Seal Inserter

123453357
7419-798-003: RNCC: 3 | RNVC: 2

3 Mar 1998

5120-12-094-1276

5120-12-133-3198
Crimping Tool Die

121333198
05030: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-389-2785
Mechanical Puller Step Plate

123892785
129589106300: RNCC: 3 | RNVC: 2
129589106300: RNCC: 5 | RNVC: 2

15 Jun 2012

5120-12-126-1300

5120-12-329-3875
Drive Pin Punch

123293875
518 148: RNCC: 3 | RNVC: 2

15 Aug 1992

5120-12-192-0837
Socket Head Screw Key Set

121920837
4325224: RNCC: 3 | RNVC: 2
626052-8: RNCC: 3 | RNVC: 2
62620-8: RNCC: 5 | RNVC: 9

23 Mar 1982

5120-12-305-7611
Cementing And Vulcanizing Stitcher

123057611
E5246-2: RNCC: 3 | RNVC: 2

10 Dec 1985

5120-12-150-3935
Einstellvorrichtung

121503935
1X46908022: RNCC: 3 | RNVC: 2
V90802-2AND3: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-185-8706
Socket Head Screw Key

121858706
LN964BP: RNCC: 3 | RNVC: 2
368-9/64X100: RNCC: 3 | RNVC: 2
368-9/64IN: RNCC: 5 | RNVC: 2

6 Nov 1980

5120-12-163-6641
Spanner Wrench

121636641
26-21C1481G002: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-176-7344
Stempel

121767344
VG95211-ML-121767344: RNCC: 2 | RNVC: 2
105-42322W1.03: RNCC: 3 | RNVC: 2
105-42322W1-03: RNCC: 5 | RNVC: 2

15 Dec 1978

5120-12-193-0669
Torque Wrench Adapter

121930669
TL5120-0086-530: RNCC: 2 | RNVC: 2
732/10-19: RNCC: 3 | RNVC: 2
58221019: RNCC: 5 | RNVC: 2
7452-8 19: RNCC: 5 | RNVC: 9
21/DC-19: RNCC: 5 | RNVC: 9
6263110030: RNCC: 5 | RNVC: 9
6630C-19: RNCC: 5 | RNVC: 9

16 Jun 1982

5120-12-159-8928
Electronic Equipment Alignment Tool

121598928
NO PRIMARY REF 12-159-8928: RNCC: 3 | RNVC: 2
28-10760-00: RNCC: 5 | RNVC: 9
28/10760.00: RNCC: 5 | RNVC: 9
9253 810760: RNCC: 5 | RNVC: 9
9253810760: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-384-3503
Bearing And Bushing Inserter And Remover

123843503
F30450454: RNCC: 3 | RNVC: 2

16 Feb 2011

5120-12-384-3401
Engine Valve Seat Insert Replacing Tool

123843401
F30378881: RNCC: 3 | RNVC: 2

15 Feb 2011

5120-12-389-2304
Rotat Holding Tool

123892304
112589034000: RNCC: 3 | RNVC: 2
112589034000: RNCC: 5 | RNVC: 2

11 Jun 2012

5120-12-150-3949
Dorn

121503949
837589184300: RNCC: 3 | RNVC: 2
8375891843: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-357-8945
Ratchet Wrench

123578945
714 251 15: RNCC: 3 | RNVC: 2

8 Aug 2002

5120-12-144-2085
Schluessel

121442085
5800358-300000.01: RNCC: 3 | RNVC: 2
5800358-300000-01: RNCC: 5 | RNVC: 2
5800358-300000-01: RNCC: 5 | RNVC: 9
431276200010: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-178-3279
Open End Wrench

121783279
6-7/8X1.W: RNCC: 3 | RNVC: 2
03840: RNCC: 5 | RNVC: 9
450W2832: RNCC: 5 | RNVC: 9
450WV7-8X1: RNCC: 5 | RNVC: 9

12 Apr 1979

5120-12-389-4763
Torque Wrench

123894763
730N/5: RNCC: 3 | RNVC: 2
4018754139514: RNCC: 5 | RNVC: 2
50181005: RNCC: 5 | RNVC: 2

11 Jul 2012

5120-12-383-6975
Mechanical Puller

123836975
1X56.136.557: RNCC: 3 | RNVC: 2

25 Nov 2010

5120-12-150-1843
Torque Wrench

121501843
8567-10: RNCC: 3 | RNVC: 2
5120121501843: RNCC: 5 | RNVC: 2
7685960: RNCC: 5 | RNVC: 2
8567-10: RNCC: 5 | RNVC: 2
23111-6900-04: RNCC: 5 | RNVC: 2
K756WCL: RNCC: 5 | RNVC: 2
23111-6900-04: RNCC: 5 | RNVC: 2
5120-43: RNCC: 5 | RNVC: 9
K 756 WCL: RNCC: 5 | RNVC: 9
K756WCL: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-340-4968
Hand Hydraulic Jack

123404968
250.180.5: RNCC: 3 | RNVC: 2
A2-170: RNCC: 5 | RNVC: 2
VGA2-170: RNCC: 5 | RNVC: 9

23 Apr 1996

5120-12-121-4452
Socket Wrench Socket

121214452
4011 38: RNCC: 3 | RNVC: 2
5305-38: RNCC: 3 | RNVC: 2
32-38: RNCC: 3 | RNVC: 2
1000-38: RNCC: 3 | RNVC: 2
55-38: RNCC: 3 | RNVC: 2
100-6-38: RNCC: 3 | RNVC: 2
11890: RNCC: 5 | RNVC: 2
2389110009: RNCC: 5 | RNVC: 2
05010038: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-130-3366
Tap And Reamer Extension

121303366
DIN377-2,1: RNCC: 2 | RNVC: 2
83300: RNCC: 3 | RNVC: 2
207100: RNCC: 3 | RNVC: 2
3110-2-1: RNCC: 3 | RNVC: 2
807-2-1: RNCC: 3 | RNVC: 2
2,1DIN377: RNCC: 5 | RNVC: 2
4826-2-1: RNCC: 5 | RNVC: 9
2-1DIN377: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-198-7523
Lager- Und Einsatz

121987523
5870055031: RNCC: 3 | RNVC: 2
026055: RNCC: 5 | RNVC: 2
5870055031: RNCC: 5 | RNVC: 9

23 Feb 1984

5120-12-148-0361
Schluessel

121480361
027M05900: RNCC: 3 | RNVC: 2
244003: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-358-7504
Mechanical Puller Attachment

123587504
16-21: RNCC: 3 | RNVC: 2

11 Nov 2002

5120-12-021-2461

5120-12-044-5035

5120-12-094-0150

5120-12-389-5114
Torque Wrench Adapter

123895114
R809306: RNCC: 3 | RNVC: 2

16 Jul 2012

5120-12-172-9536
Socket Wrench

121729536
1X56122383: RNCC: 3 | RNVC: 2

6 Mar 1978

5120-12-176-7448
Open End Wrench

121767448
180600: RNCC: 3 | RNVC: 2
180600: RNCC: 3 | RNVC: 9
0180600: RNCC: 5 | RNVC: 9

15 Dec 1978

5120-12-050-0827

5120-12-330-8018
Stud Remover

123308018
4988032: RNCC: 3 | RNVC: 2

10 Feb 1993

5120-12-127-2646
Spanner Wrench

121272646
P67442D: RNCC: 3 | RNVC: 2
ZP67442D: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-134-2694
Aus- Und Einbauvorr

121342694
VM74604: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-343-2199
Seal Remover

123432199
18 910 9002: RNCC: 3 | RNVC: 2

21 May 1997

5120-12-333-5663
Seal Inserter

123335663
1911901: RNCC: 3 | RNVC: 2

6 Jan 1994

5120-12-387-9336
Torque Wrench

123879336
10120652: RNCC: 3 | RNVC: 2

9 Feb 2012

5120-12-328-6973
Bearing And Bushing Inserter And Remover

123286973
559589003300: RNCC: 3 | RNVC: 2
5595890033/00: RNCC: 5 | RNVC: 2

16 Jun 1992

5120-12-356-8354
Socket Wrench Extension

123568354
8208/VSP-FARON: RNCC: 3 | RNVC: 2
82.0092.25: RNCC: 5 | RNVC: 2

9 Apr 2002

5120-12-304-0779
Spanner Wrench

123040779
300-0003D2714: RNCC: 3 | RNVC: 2

10 Jun 1985

5120-12-169-3772
Pliers

121693772
0805110: RNCC: 3 | RNVC: 2
51-6800-109-01: RNCC: 3 | RNVC: 2
00.12.14.50: RNCC: 5 | RNVC: 2
08 05 110: RNCC: 5 | RNVC: 2

11 May 1977

5120-12-126-3191
Wood Mallet

121263191
NO PRIMARY REF 12-126-3191: RNCC: 3 | RNVC: 2
B90DIN5196: RNCC: 5 | RNVC: 2
DIN5196-B90: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-381-2122
Hand Hammer

123812122
754800-22: RNCC: 3 | RNVC: 2

21 Jan 2010

5120-12-377-5307
Spanner Wrench

123775307
TSC-A100/ALG: RNCC: 3 | RNVC: 2
TSC-A100/ALG: RNCC: 5 | RNVC: 2

22 Jan 2009

5120-12-126-3399
Shovel Handle

121263399
510022-0-10: RNCC: 2 | RNVC: 2
5120-011-10: RNCC: 4 | RNVC: 1
510022-0-10: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-198-7841
Mechanical Puller

121987841
P896903: RNCC: 3 | RNVC: 2
P-896903-405: RNCC: 5 | RNVC: 2
P-896903-407: RNCC: 5 | RNVC: 2
P896903-405: RNCC: 5 | RNVC: 2
P896903-407: RNCC: 5 | RNVC: 2
MAGERD 8142: RNCC: 5 | RNVC: 9

27 Feb 1984

5120-12-134-2699
Dorn

121342699
016M07200: RNCC: 3 | RNVC: 2
VM66744: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-332-6914
Seal Inserter

123326914
9100510039: RNCC: 3 | RNVC: 2

7 Sep 1993

5120-12-327-9132
Socket Head Screw Key

123279132
6705032: RNCC: 3 | RNVC: 2

19 Mar 1992

5120-12-330-7080
Torque Wrench Adapter

123307080
52254010: RNCC: 3 | RNVC: 2

28 Jan 1993

5120-12-335-0829
Box Wrench

123350829
8882815273: RNCC: 3 | RNVC: 2
341165548: RNCC: 5 | RNVC: 2

21 Jul 1994

5120-12-342-2146
Hand Beading Tool

123422146
15490102: RNCC: 3 | RNVC: 2

7 Jan 1997

5120-12-121-6899

5120-12-176-3561
Boerdelwerkzeug

121763561
105-13141W1: RNCC: 3 | RNVC: 2

23 Nov 1978

5120-12-182-4199
Druckstuecksatz

121824199
VW459: RNCC: 3 | RNVC: 9

30 Jan 1980

5120-12-368-1242
Socket Wrench Adapter

123681242
958-28: RNCC: 3 | RNVC: 2

12 Dec 2005

5120-12-090-1662

5120-12-319-4220
Torque Wrench Adapter

123194220
8796-30: RNCC: 3 | RNVC: 2

29 Sep 1989

5120-12-391-7138
Mechanical Puller Step Plate

123917138
80996230035: RNCC: 3 | RNVC: 2
80.99623-0035: RNCC: 5 | RNVC: 2

28 Mar 2013

5120-12-189-9726
Bearing And Bushing Inserter

121899726
NO PRIMARY REF 12-189-9726: RNCC: 3 | RNVC: 2
440170: RNCC: 5 | RNVC: 9
440170: RNCC: 5 | RNVC: 9

29 Oct 1981

5120-12-129-0674
Crowfoot Socket Wrench Head

121290674
NO PRIMARY REF 12-129-0674: RNCC: 3 | RNVC: 2
5100: RNCC: 5 | RNVC: 9
108361: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-133-3614
Open End Wrench

121333614
NO PRIMARY REF 12-133-3614: RNCC: 3 | RNVC: 2
105817: RNCC: 5 | RNVC: 9
1953M21X23: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-312-1028
Body And Fender Spoon

123121028
05300040: RNCC: 3 | RNVC: 9

20 Nov 1987

5120-12-369-9585
Swivel Knob Jeweler's Screwdriver

123699585
4882X ESD PH 1X80: RNCC: 3 | RNVC: 2

30 Aug 2006

5120-12-377-8914
Hand Screw Jack

123778914
2115830215: RNCC: 3 | RNVC: 2

19 Feb 2009

5120-12-371-1580
Cross Tip Screwdriver

123711580
11311: RNCC: 3 | RNVC: 2
4001002113114: RNCC: 5 | RNVC: 2

21 Feb 2007

5120-12-354-1600
Spanner Wrench

123541600
4185782: RNCC: 3 | RNVC: 2
6503.201.10.12.000: RNCC: 5 | RNVC: 2

12 Jun 2001

5120-12-361-4825
Drive Pin Punch

123614825
0003-0644-300: RNCC: 3 | RNVC: 2

7 Oct 2003

5120-12-315-4200
Vise Jaw Caps

123154200
10886: RNCC: 3 | RNVC: 2
10886: RNCC: 5 | RNVC: 9

20 Oct 1988

5120-12-366-0604
Torque Wrench Adapter

123660604
CBD46403P01: RNCC: 3 | RNVC: 2

4 Mar 2005

5120-12-172-6371
Dorn

121726371
1X56100632: RNCC: 3 | RNVC: 2
83091436073: RNCC: 5 | RNVC: 2
8207199: RNCC: 5 | RNVC: 2
8470100: RNCC: 5 | RNVC: 2
0535410: RNCC: 5 | RNVC: 2
83.09143-6073: RNCC: 5 | RNVC: 2
V100632: RNCC: 5 | RNVC: 2
535410: RNCC: 5 | RNVC: 9

31 Jan 1978

5120-12-193-0244
Socket Wrench Adapter

121930244
NM 303-53: RNCC: 3 | RNVC: 2
NM303-53: RNCC: 5 | RNVC: 2
NM 303-53: RNCC: 5 | RNVC: 9
NM303-53: RNCC: 5 | RNVC: 9

15 Jun 1982

5120-12-176-7294
Druckstueck

121767294
VG95211-ML-121767294: RNCC: 2 | RNVC: 2
105-41069W1.03: RNCC: 3 | RNVC: 2
105-41069W1-03: RNCC: 5 | RNVC: 2

15 Dec 1978

5120-12-304-8918
Socket Wrench

123048918
NO PRIMARY REF 12-304-8918: RNCC: 3 | RNVC: 2
C65055-A757-C511: RNCC: 5 | RNVC: 9
Q81-X2110: RNCC: 5 | RNVC: 9

2 Sep 1985

5120-12-171-1312
Mutter

121711312
100227-93600.03: RNCC: 2 | RNVC: 2
9010-0573-00-03: RNCC: 3 | RNVC: 2
100227-93600.03: RNCC: 5 | RNVC: 9

9 Sep 1977

5120-12-361-5793
Montierdorn

123615793
4900450-000-01: RNCC: 3 | RNVC: 2

20 Oct 2003

5120-12-364-5626
Open End Wrench

123645626
40032426-TCS: RNCC: 3 | RNVC: 2

9 Oct 2004

5120-12-163-0528
Einfuehrkegel

121630528
125020: RNCC: 3 | RNVC: 2
8207140: RNCC: 5 | RNVC: 2
8410066: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-194-8774
Spanner Wrench

121948774
KDAL5002: RNCC: 3 | RNVC: 2
KDAL5002: RNCC: 5 | RNVC: 2

14 Dec 1982

5120-12-339-5323
Mechanical Puller Attachment

123395323
1476014019: RNCC: 3 | RNVC: 2

30 Nov 1995

5120-12-041-2662

5120-12-137-4184

5120-12-359-9309
Hand Hammer

123599309
5027085000: RNCC: 3 | RNVC: 2
5027.08-5000: RNCC: 5 | RNVC: 2
TVA5120-2-263-002-1.1.1-5000GR: RNCC: 5 | RNVC: 2

20 Mar 2003

5120-12-158-2660
Pliers

121582660
TMC12-502-2: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-332-8077
Op Montierwerkzeug

123328077
532113-8126.902: RNCC: 3 | RNVC: 2
532113-8126.902: RNCC: 5 | RNVC: 9

22 Sep 1993

5120-12-152-4879
Schluessel

121524879
NO PRIMARY REF 12-152-4879: RNCC: 3 | RNVC: 2
1092105-9404: RNCC: 5 | RNVC: 2
115-03165-4: RNCC: 5 | RNVC: 9
4-7824-009: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-126-4927
Sheet Metalworking Stake

121264927
631B163-80: RNCC: 3 | RNVC: 2
5073-5-80: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-195-0676
Socket Head Screw Key

121950676
0851 9666: RNCC: 3 | RNVC: 2
8519666: RNCC: 5 | RNVC: 2

10 Jan 1983

5120-12-023-1490

5120-12-186-8044
Biegeeisen

121868044
NO PRIMARY REF 12-186-8044: RNCC: 3 | RNVC: 2
3745: RNCC: 5 | RNVC: 9

6 Feb 1981

5120-12-319-3756
Blindn Nietzugkopf

123193756
5C-615-64: RNCC: 3 | RNVC: 2
H615-5CTSK: RNCC: 5 | RNVC: 9

27 Sep 1989

5120-12-312-0278
Spanner Wrench

123120278
D9460-1371: RNCC: 3 | RNVC: 2

11 Nov 1987

5120-12-126-3031
Socket Wrench

121263031
92-30X32: RNCC: 3 | RNVC: 2
34-30X32: RNCC: 3 | RNVC: 2
092095: RNCC: 5 | RNVC: 2
81668070046: RNCC: 5 | RNVC: 2
107836: RNCC: 5 | RNVC: 9
29-30X32: RNCC: 5 | RNVC: 9
4040M30X32: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-327-6353
Face Spanner Wrench Socket

123276353
450900-0975: RNCC: 3 | RNVC: 2

11 Feb 1992

5120-12-126-1769
Drive Pin Punch

121261769
NO PRIMARY REF 12-126-1769: RNCC: 3 | RNVC: 2
L2: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-198-6040
Open End Wrench

121986040
E42P00-0311: RNCC: 3 | RNVC: 2

14 Feb 1984

5120-12-177-5782
Box Wrench

121775782
UHC303-41: RNCC: 3 | RNVC: 2
UHC303-41: RNCC: 5 | RNVC: 9

7 Feb 1979

5120-12-346-9782
Craftsman's Tweezers

123469782
9307150: RNCC: 3 | RNVC: 2

7 Oct 1998

5120-12-139-3005

5120-12-350-8468
Machinist's Vise

123508468
HEUERFRONT100MMFEST: RNCC: 3 | RNVC: 2
HEUERFRONT100MMFEST: RNCC: 5 | RNVC: 9

29 May 2000

5120-12-342-0487
Cross Tip Screwdriver

123420487
4723ESD PZD/SDV2X100: RNCC: 3 | RNVC: 2

4 Dec 1996

5120-12-123-5512

5120-12-378-4124
Socket Wrench Handle

123784124
916GK: RNCC: 3 | RNVC: 2
4000896046201: RNCC: 5 | RNVC: 2

2 Apr 2009

5120-12-330-4052
Torque Wrench

123304052
591801-9081.000: RNCC: 3 | RNVC: 2

11 Dec 1992

5120-12-383-4034
Seal Inserter And Remover

123834034
F6781700: RNCC: 3 | RNVC: 2

15 Oct 2010

5120-12-321-0811
Hand Scissors Jack

123210811
OKS750: RNCC: 3 | RNVC: 2
1432143: RNCC: 5 | RNVC: 2
90 157 276: RNCC: 5 | RNVC: 2

26 Mar 1990

5120-12-363-4427
Seal Inserter

123634427
142810: RNCC: 3 | RNVC: 2
142910: RNCC: 5 | RNVC: 9

16 Jun 2004

5120-12-363-8158
Bearing And Bushing Inserter And Remover

123638158
T670P5001238: RNCC: 3 | RNVC: 2

28 Jul 2004

5120-12-387-0714
Mounting Sleeve

123870714
236989: RNCC: 3 | RNVC: 2
94852: RNCC: 5 | RNVC: 2

3 Nov 2011

5120-12-382-2246
Socket Wrench Set

123822246
0430001S: RNCC: 3 | RNVC: 2

25 May 2010

5120-12-360-4962
Mechanical Puller

123604962
CBD30193G01: RNCC: 3 | RNVC: 2

27 May 2003

5120-12-146-5123

5120-12-343-3834
Bearing And Bushing Inserter

123433834
385589001500: RNCC: 3 | RNVC: 2

12 Jun 1997

5120-12-126-5442

5120-12-179-5814
Betaetigungsstange

121795814
08997: RNCC: 3 | RNVC: 2

11 Jul 1979

5120-12-335-4093
Face Spanner Wrench Socket

123354093
0852 0759: RNCC: 3 | RNVC: 2
8520759: RNCC: 5 | RNVC: 2

17 Aug 1994

5120-12-325-2249
Mechanical Puller

123252249
0852 3060: RNCC: 3 | RNVC: 2
8523060: RNCC: 5 | RNVC: 2

17 May 1991

5120-12-199-2927
Mater Saug- Griff

121992927
VG95211-ML-121992927: RNCC: 2 | RNVC: 2
C74407-A4-A4: RNCC: 3 | RNVC: 2

10 Apr 1984

5120-12-305-8086
Socket Wrench Handle Bar

123058086
TK-BA35-5120-427: RNCC: 2 | RNVC: 2
131017: RNCC: 3 | RNVC: 2
E8106: RNCC: 5 | RNVC: 9

17 Dec 1985

5120-12-307-4539
Box Wrench

123074539
NO PRIMARY REF 12-307-4539: RNCC: 3 | RNVC: 2
220 A.F.-CS-5/8X3/4: RNCC: 5 | RNVC: 9
238 058: RNCC: 5 | RNVC: 9

19 Jun 1986

5120-12-133-3692
Ausziehvorrichtung

121333692
709-181: RNCC: 3 | RNVC: 2
M1358M32X1-5-75: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-321-2690
Torque Wrench

123212690
NO PRIMARY REF 12-321-2690: RNCC: 3 | RNVC: 2
760NM/75: RNCC: 5 | RNVC: 9
760/75: RNCC: 5 | RNVC: 9

25 Apr 1990

5120-12-147-4394
Pliers

121474394
DIN5235-A-KUNSTSTOFFUEBERZUG: RNCC: 2 | RNVC: 2
2713BB: RNCC: 3 | RNVC: 2
190-591 130: RNCC: 3 | RNVC: 2
ADIN5235: RNCC: 5 | RNVC: 2
106709: RNCC: 5 | RNVC: 2
190-591 130: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-192-1289
Ausziehvorrichtung

121921289
E1149025-0040: RNCC: 3 | RNVC: 2
E11.49025-0040: RNCC: 5 | RNVC: 2
E11.49025-0040: RNCC: 5 | RNVC: 2

24 Mar 1982

5120-12-130-9075
Tube Fitting Wrenching Socket

121309075
NO PRIMARY REF 12-130-9075: RNCC: 3 | RNVC: 2
7411Z5-16: RNCC: 5 | RNVC: 9
7411Z5-16IN: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-334-9500
Mechanical Puller Step Plate

123349500
11.49042-0124: RNCC: 3 | RNVC: 2
C11.49021-0260TEIL2: RNCC: 5 | RNVC: 2
C11.49021-0260TEIL2: RNCC: 5 | RNVC: 9
11.49042-0124: RNCC: 5 | RNVC: 9

5 Jul 1994

5120-12-369-8138
Socket Wrench

123698138
34/13X17: RNCC: 3 | RNVC: 2
4040M13X17: RNCC: 3 | RNVC: 2
29-13X17: RNCC: 3 | RNVC: 2
6299600: RNCC: 5 | RNVC: 2
00.31.97.93: RNCC: 5 | RNVC: 2

17 Aug 2006

5120-12-368-8060
Socket Wrench Socket

123688060
DIN3124-S34-20: RNCC: 2 | RNVC: 2
55-34: RNCC: 3 | RNVC: 2
771-S34: RNCC: 3 | RNVC: 2
05010034: RNCC: 5 | RNVC: 2
00.51.78.37: RNCC: 5 | RNVC: 2

24 Apr 2006

5120-12-415-8758

5120-12-123-5258
Open End Box Wrench

121235258
1949M-12-13: RNCC: 3 | RNVC: 2
00.27.85.69: RNCC: 5 | RNVC: 2
1055417: RNCC: 5 | RNVC: 2
105541: RNCC: 5 | RNVC: 9
1949M12X13: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-126-2528

5120-12-121-1049
Socket Wrench Socket

121211049
NO PRIMARY REF 12-121-1049: RNCC: 3 | RNVC: 2
108883: RNCC: 5 | RNVC: 2
6800Z11-32: RNCC: 5 | RNVC: 2
01420022: RNCC: 5 | RNVC: 9
40AL11-32: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-353-1176
Mechanical Puller Attachment

123531176
CBD30086P03: RNCC: 3 | RNVC: 2

30 Jan 2001

5120-12-300-4861
Spanner Wrench

123004861
G005/114000: RNCC: 3 | RNVC: 2
G005/114000: RNCC: 5 | RNVC: 9

7 Aug 1984

5120-12-351-9614
Hand Hammer

123519614
5036040030: RNCC: 3 | RNVC: 2
5036.04.0030: RNCC: 5 | RNVC: 2

20 Sep 2000

5120-12-388-5488
Socket Wrench Handle Bar

123885488
000.261: RNCC: 3 | RNVC: 2

29 Mar 2012

5120-12-121-4892
Open End Wrench

121214892
TL5120-0101-170: RNCC: 2 | RNVC: 2
12A-3/16: RNCC: 3 | RNVC: 2
40461212: RNCC: 5 | RNVC: 2
2209-26: RNCC: 5 | RNVC: 9
104967: RNCC: 5 | RNVC: 9
TL5120-0082-440: RNCC: 5 | RNVC: 9
1931Z3-16: RNCC: 5 | RNVC: 9
TK-KG55-5120-354-170: RNCC: 5 | RNVC: 9
TK5120-354-170: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-123-5091
Open End Wrench

121235091
NO PRIMARY REF 12-123-5091: RNCC: 3 | RNVC: 2
330-5X4,5: RNCC: 5 | RNVC: 9
330-5X4-5: RNCC: 5 | RNVC: 9
1932WM5X4-5: RNCC: 5 | RNVC: 9
00630: RNCC: 5 | RNVC: 9
1203110004: RNCC: 5 | RNVC: 9
105040: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-147-0939
Socket Wrench

121470939
3807-007502-01-3: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-189-7262
Torque Wrench Adapter

121897262
2300109-990226.000.0: RNCC: 2 | RNVC: 2
2300109-990226.000.0: RNCC: 3 | RNVC: 2
2300109-990226.000.0: RNCC: 3 | RNVC: 2
5120700066: RNCC: 5 | RNVC: 2
2300109-990226-000-0: RNCC: 5 | RNVC: 2

19 Oct 1981

5120-12-186-6060
Torque Wrench Adapter

121866060
TL5120-0086-980: RNCC: 2 | RNVC: 2
6403-1S: RNCC: 3 | RNVC: 2
735/10: RNCC: 3 | RNVC: 2
30DC-1/2: RNCC: 3 | RNVC: 2
735-10: RNCC: 5 | RNVC: 9
8209-270: RNCC: 5 | RNVC: 9
F30027340: RNCC: 5 | RNVC: 9
65760-1-1/2: RNCC: 5 | RNVC: 9
8470453: RNCC: 5 | RNVC: 9

21 Jan 1981

5120-12-180-0980
Einbauvorrichtung

121800980
VG95211-ML-121800980: RNCC: 2 | RNVC: 2
P-895055-407: RNCC: 3 | RNVC: 2
P895055-407: RNCC: 5 | RNVC: 2
MAGERD2056: RNCC: 5 | RNVC: 9

20 Aug 1979

5120-12-368-3342
Inspection Mirror

123683342
EFIS 4: RNCC: 3 | RNVC: 2
EFIS-4: RNCC: 5 | RNVC: 2
5120-00440: RNCC: 6 | RNVC: 9

20 Feb 2006

5120-12-142-0297
Screwdriver Bit

121420297
NO PRIMARY REF 12-142-0297: RNCC: 3 | RNVC: 2
00.47.93.40: RNCC: 5 | RNVC: 2
10260: RNCC: 5 | RNVC: 9
8804-17: RNCC: 5 | RNVC: 9
02080000: RNCC: 5 | RNVC: 9
429: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-120-5573
Socket Wrench

121205573
DIN659-11: RNCC: 2 | RNVC: 2
11DIN659: RNCC: 3 | RNVC: 2
11DIN659: RNCC: 5 | RNVC: 2
5168K11: RNCC: 5 | RNVC: 9
11DIN659GALNI8: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-135-0204
Socket Wrench

121350204
NO PRIMARY REF 12-135-0204: RNCC: 3 | RNVC: 2
105390: RNCC: 5 | RNVC: 9
1945NKBM7: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-170-6977
Klemmplatte

121706977
K4187-0500: RNCC: 3 | RNVC: 9

28 Jul 1977

5120-12-334-6126
Seal Inserter

123346126
4900401-411250.02: RNCC: 2 | RNVC: 2
4900401-411250.02: RNCC: 3 | RNVC: 2

30 May 1994

5120-12-331-0185
Torque Wrench Adapter

123310185
NO PRIMARY REF 12-331-0185: RNCC: 3 | RNVC: 2
2098-0824-54: RNCC: 5 | RNVC: 9

11 Mar 1993

5120-12-332-7137
Zentrier- Ring

123327137
80996100007: RNCC: 3 | RNVC: 2
80.99610-0007: RNCC: 5 | RNVC: 2

9 Sep 1993

5120-12-304-6559
Rohr Heber

123046559
4922 25012: RNCC: 3 | RNVC: 2

12 Aug 1985

5120-12-311-7413
Socket Wrench Socket

123117413
389 589 00 13 00: RNCC: 3 | RNVC: 2
389589001300: RNCC: 5 | RNVC: 2

13 Oct 1987

5120-12-319-9812
Rivet Bucking Bar

123199812
692: RNCC: 3 | RNVC: 2

24 Nov 1989

5120-12-314-2782
Gear Inserter

123142782
0852 9307: RNCC: 3 | RNVC: 2
8529307: RNCC: 5 | RNVC: 2

23 Jun 1988

5120-12-312-9615
Spanner Wrench

123129615
105-45041W30: RNCC: 3 | RNVC: 2

22 Feb 1988

5120-12-386-2808
Tool Handle Wedge

123862808
DKBE035: RNCC: 3 | RNVC: 2

22 Aug 2011

5120-12-342-8422
Mechanical Puller

123428422
18 910 7101: RNCC: 3 | RNVC: 2

9 Apr 1997

5120-12-040-8062

5120-12-364-2921
Flat Tip Screwdriver

123642921
48201080-TCS: RNCC: 3 | RNVC: 2

8 Sep 2004

5120-12-378-2598
Torque Wrench

123782598
730R/40/32: RNCC: 3 | RNVC: 2
96502053: RNCC: 5 | RNVC: 2

24 Mar 2009

5120-12-392-2085
Torque Wrench Adapter

123922085
731/40-38: RNCC: 3 | RNVC: 2
58214038: RNCC: 5 | RNVC: 2

15 May 2013

5120-12-145-1512
Spanner Wrench

121451512
04555: RNCC: 3 | RNVC: 2
4555B-645: RNCC: 5 | RNVC: 2
4555: RNCC: 5 | RNVC: 2
4555-645: RNCC: 5 | RNVC: 2
KB-4555-645: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-371-0302
Socket Head Screw Key

123710302
47282: RNCC: 3 | RNVC: 2

29 Jan 2007

5120-12-134-2725

5120-12-193-9159
Torque Wrench

121939159
TL5120-0085-040: RNCC: 2 | RNVC: 2
730V/10BW: RNCC: 3 | RNVC: 2
6291-1CTBWUND6412BW: RNCC: 3 | RNVC: 2
3340/2A: RNCC: 5 | RNVC: 9
DC-1S MIT 28/DC-3/8: RNCC: 5 | RNVC: 9
6291-1CTBW+6412: RNCC: 5 | RNVC: 9
6291-1CTUND6412BW: RNCC: 5 | RNVC: 9
730A/10UND734/5: RNCC: 5 | RNVC: 9
6291-1CTUND6412: RNCC: 5 | RNVC: 9
5120-40372: RNCC: 6 | RNVC: 9

13 Sep 1982

5120-12-394-6192
Socket Wrench Handle

123946192
00100000680: RNCC: 3 | RNVC: 2
04024089006582: RNCC: 5 | RNVC: 2
100-00-6: RNCC: 5 | RNVC: 2

19 Dec 2013

5120-12-123-5173
Open End Wrench

121235173
146AF5/8X5/8: RNCC: 3 | RNVC: 2
1931Z5-8: RNCC: 3 | RNVC: 2
1931Z5/8: RNCC: 3 | RNVC: 2
104979: RNCC: 5 | RNVC: 2
00.25.67.45: RNCC: 5 | RNVC: 2
8M5-8IN: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-336-5351
Dreh Haltewerkzeug

123365351
KD5072-001-01: RNCC: 3 | RNVC: 2
5072-0001: RNCC: 5 | RNVC: 2
KD5072-0001: RNCC: 5 | RNVC: 2

23 Nov 1994

5120-12-332-7071
Ausdrueckwerkzeug

123327071
117-46300W2: RNCC: 3 | RNVC: 2
117-46300-W2: RNCC: 5 | RNVC: 9

8 Sep 1993

5120-12-141-6642
Hand Tube Bender

121416642
636D502B1-4IN: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-362-4805
Flat Tip Screwdriver

123624805
54.0084.960.24: RNCC: 3 | RNVC: 2
8060VDE-5.5-125: RNCC: 5 | RNVC: 2

2 Mar 2004

5120-12-330-1872
Electrical Contact Remover

123301872
11-7370-3T1: RNCC: 3 | RNVC: 2

12 Nov 1992

5120-12-177-3634
Ausdruecker

121773634
713A095-45: RNCC: 3 | RNVC: 9

29 Jan 1979

5120-12-360-7003
Socket Wrench Socket

123607003
5275380230: RNCC: 3 | RNVC: 2

1 Jul 2003

5120-12-385-0506
Bearing And Bushing Inserter And Remover

123850506
I004907: RNCC: 3 | RNVC: 2
4052063049072: RNCC: 5 | RNVC: 2

26 Apr 2011

5120-12-325-9997
Mechanical Puller Attachment

123259997
460589023400: RNCC: 3 | RNVC: 2
63-505-00: RNCC: 3 | RNVC: 2

29 Jul 1991

5120-12-381-9152
Socket Head Screw Key

123819152
90-800-57: RNCC: 3 | RNVC: 2

16 Apr 2010

5120-12-140-3047
Socket Wrench

121403047
DIN3112-K65: RNCC: 2 | RNVC: 2
3112-65: RNCC: 3 | RNVC: 2
K65DIN3112: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-367-9499
Flat Tip And Cross Tip Screwdriver Set

123679499
96593513: RNCC: 3 | RNVC: 2

9 Nov 2005

5120-12-310-4265
Electronic Equipment Alignment Tool

123104265
3512 118 1724 1: RNCC: 3 | RNVC: 2
351211817241: RNCC: 5 | RNVC: 2

21 May 1987

5120-12-368-8650
Screw Extractor

123688650
260 004 3: RNCC: 3 | RNVC: 2
01.42.43.81: RNCC: 5 | RNVC: 2

2 May 2006

5120-12-304-5226
Schluesseleinsatz

123045226
31R14: RNCC: 3 | RNVC: 2
624578: RNCC: 5 | RNVC: 2

26 Jul 1985

5120-12-328-6974
Bearing And Bushing Inserter

123286974
F6141094: RNCC: 3 | RNVC: 2

16 Jun 1992

5120-12-305-6607
Mechanical Puller

123056607
4V3063-A: RNCC: 3 | RNVC: 2
4V3063-A: RNCC: 5 | RNVC: 9
4V3063A: RNCC: 5 | RNVC: 9

2 Dec 1985

5120-12-153-2084
Mechanical Puller

121532084
CH1311-1-31NM: RNCC: 3 | RNVC: 2
1201 9484: RNCC: 5 | RNVC: 2
12019484: RNCC: 5 | RNVC: 2
A26.50-29/01: RNCC: 5 | RNVC: 2
CH1311-1-31NM: RNCC: 5 | RNVC: 9
A26-50-29-01: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-383-6656
Quick Adjusting Screw Clamp

123836656
TB150: RNCC: 3 | RNVC: 2

23 Nov 2010

5120-12-123-4964
Hand Rivet Set

121234964
30664: RNCC: 3 | RNVC: 2
B10DIN6435: RNCC: 5 | RNVC: 9
DIN6435-B10: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-123-5590
Schluesseleinsatzsa

121235590
NO PRIMARY REF 12-123-5590: RNCC: 3 | RNVC: 2
107881: RNCC: 5 | RNVC: 9
157651: RNCC: 5 | RNVC: 9
4115-3-3: RNCC: 5 | RNVC: 9
4115-3A: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-144-0630
Abziehv Druckplatte

121440630
2821006: RNCC: 3 | RNVC: 2
2821-006: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-388-9101
Vise Spindle

123889101
D0103876-001: RNCC: 3 | RNVC: 2

7 May 2012

5120-12-352-8791
Adjustable Wrench

123528791
87-750: RNCC: 3 | RNVC: 2

28 Dec 2000

5120-12-140-9208
Mechanical Puller

121409208
4618: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-157-7316
Socket Wrench

121577316
NO PRIMARY REF 12-157-7316: RNCC: 3 | RNVC: 2
4-7828-205: RNCC: 5 | RNVC: 9
1092106-9400-002: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-196-4079
Open End Wrench

121964079
NO PRIMARY REF 12-196-4079: RNCC: 3 | RNVC: 2
445083: RNCC: 5 | RNVC: 9
445083: RNCC: 5 | RNVC: 9

4 Jul 1983

5120-12-373-1806
Pliers

123731806
2427 GC-160IP: RNCC: 3 | RNVC: 2
00.14.74.19: RNCC: 5 | RNVC: 2

8 Oct 2007

5120-12-173-4635
Spanner Wrench

121734635
009-017.412-003W1: RNCC: 3 | RNVC: 2
009-017-412-003W1: RNCC: 5 | RNVC: 2

18 Apr 1978

5120-12-327-2976
Screwdriver Bit Set And Handle

123272976
JD5120-12-327-2976: RNCC: 3 | RNVC: 2
52850/200: RNCC: 5 | RNVC: 9

7 Jan 1992

5120-12-195-3038
Lamp Extractor

121953038
7800113950: RNCC: 3 | RNVC: 2
78001 13950: RNCC: 5 | RNVC: 9

7 Feb 1983

5120-12-360-0243
Socket Head Screw Key

123600243
05023107001: RNCC: 3 | RNVC: 2
353-2,5X75: RNCC: 3 | RNVC: 2
354-2,5X75: RNCC: 5 | RNVC: 2
023107: RNCC: 5 | RNVC: 9

28 Mar 2003

5120-12-359-8389
Schluessel

123598389
4-ST-11212410-111: RNCC: 3 | RNVC: 2

13 Mar 2003

5120-12-126-1787
Drill Guide

121261787
TL5120-0052-70A: RNCC: 2 | RNVC: 2
908/1: RNCC: 3 | RNVC: 2
1418A: RNCC: 3 | RNVC: 2
104050: RNCC: 5 | RNVC: 2
JD5120-12-126-1787: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-133-2698
Stanz- Stempelsatz

121332698
TL5120-0059-6: RNCC: 2 | RNVC: 2
27: RNCC: 3 | RNVC: 2
705201040: RNCC: 5 | RNVC: 2
STPLL7: RNCC: 5 | RNVC: 2
27: RNCC: 5 | RNVC: 9
STPLL7: RNCC: 5 | RNVC: 9
5120-0059-7: RNCC: 5 | RNVC: 9
5120-059-7: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-173-1729
Spannpl Druckplatte

121731729
VG95211-ML-121731729: RNCC: 2 | RNVC: 2
1X56 136 907-6: RNCC: 3 | RNVC: 2
1X56136907-6: RNCC: 5 | RNVC: 2

22 Mar 1978

5120-12-153-4999
Mechanical Puller

121534999
CH1313-1-2: RNCC: 3 | RNVC: 2
1205 1865: RNCC: 3 | RNVC: 2
12051865: RNCC: 5 | RNVC: 2
3.415.0.018.040.6: RNCC: 5 | RNVC: 2
3-415-0-018-040-6: RNCC: 5 | RNVC: 9
CH1313-1-2: RNCC: 5 | RNVC: 9
6-0888-01-9-0302: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-325-5282
Socket Head Screw Key Set

123255282
NO PRIMARY REF 12-325-5282: RNCC: 3 | RNVC: 2
837/7K: RNCC: 5 | RNVC: 9
4439310009: RNCC: 5 | RNVC: 9
837-7K: RNCC: 5 | RNVC: 9
837/7: RNCC: 5 | RNVC: 9

14 Jun 1991

5120-12-188-5919
Face Spanner Wrench Socket

121885919
0706D101856/1: RNCC: 3 | RNVC: 2
0706D101856/1-C: RNCC: 5 | RNVC: 9
0706D101856/1-D: RNCC: 5 | RNVC: 9
MAGERD 5766: RNCC: 5 | RNVC: 9
0706D101856/1-B: RNCC: 5 | RNVC: 9

20 Jul 1981

5120-12-189-1322
Wrench Kit

121891322
625A: RNCC: 3 | RNVC: 2
310A/11: RNCC: 5 | RNVC: 9
4411980002: RNCC: 5 | RNVC: 9
12300A: RNCC: 5 | RNVC: 9

1 Sep 1981

5120-12-324-6152
Socket Wrench

123246152
601589000800: RNCC: 3 | RNVC: 2

7 Mar 1991

5120-12-359-3845
Socket Wrench Set

123593845
775-03-M: RNCC: 3 | RNVC: 2
50775030080: RNCC: 5 | RNVC: 2

30 Jan 2003

5120-12-070-0222

5120-12-044-4897

5120-12-175-3439
Sicherungsvorrichtu

121753439
01TC34433: RNCC: 3 | RNVC: 2
01TC30077: RNCC: 5 | RNVC: 9

11 Sep 1978

5120-12-353-2083
Socket Wrench

123532083
CBD45074G01: RNCC: 3 | RNVC: 2

12 Feb 2001

5120-12-133-3473
Dorn

121333473
CH1989-9NM: RNCC: 3 | RNVC: 2
1201 9472: RNCC: 5 | RNVC: 2
W38557-2A: RNCC: 5 | RNVC: 2
CH1989-9NM: RNCC: 5 | RNVC: 9
A26-50-124: RNCC: 5 | RNVC: 9
W38557-2A: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-344-6432
Mechanical Puller

123446432
99340205: RNCC: 3 | RNVC: 2

19 Nov 1997

5120-12-369-1254
Lifting Pneumatic Bag

123691254
1314003100: RNCC: 3 | RNVC: 2
ZV13149000: RNCC: 5 | RNVC: 2
TYPE V68: RNCC: 5 | RNVC: 2

29 May 2006

5120-12-409-8541
Electrical Remover

5120-12-384-3048
Torque Wrench Adapter

123843048
F30450902: RNCC: 3 | RNVC: 2

10 Feb 2011

5120-12-363-9690
Bearing And Bushing Inserter

123639690
T671P5002201: RNCC: 3 | RNVC: 2

7 Aug 2004

5120-12-023-1479

5120-12-123-5804
Socket Wrench Socket

121235804
5015 1 7/16: RNCC: 3 | RNVC: 2
110713: RNCC: 5 | RNVC: 9
9500DZ1 7-16: RNCC: 5 | RNVC: 9
06410062: RNCC: 5 | RNVC: 9
60A1 7-16: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-155-8791
Craftsman's Tweezers

121558791
9381-105-S: RNCC: 3 | RNVC: 2
4240402: RNCC: 3 | RNVC: 2
2135-19: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-143-9456
Sicherungs- Stift

121439456
1516: RNCC: 3 | RNVC: 2
001-485: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-126-2952
Screw Extractor

121262952
TL5120-0052-60A: RNCC: 2 | RNVC: 2
1415-8,7: RNCC: 3 | RNVC: 2
104047: RNCC: 5 | RNVC: 2
1415: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-335-9547
Joint Breaking Wedge

123359547
135-1: RNCC: 3 | RNVC: 2
166-1: RNCC: 3 | RNVC: 2
12015-18: RNCC: 5 | RNVC: 9

6 Oct 1994

5120-12-346-7826
Seal Inserter

123467826
80996040170: RNCC: 3 | RNVC: 2

10 Sep 1998

5120-12-162-3771
Fuse Puller

121623771
NO PRIMARY REF 12-162-3771: RNCC: 3 | RNVC: 2
1542825: RNCC: 5 | RNVC: 2
3N1000: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-147-1307
Socket Head Screw Key

121471307
WZ53: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-340-8823
Oelfilt Schluessel

123408823
4280004: RNCC: 3 | RNVC: 2

27 Jun 1996

5120-12-305-2839
Screw Thread Insert Inserter

123052839
01500474600: RNCC: 3 | RNVC: 2

17 Oct 1985

5120-12-336-5076
Bearing And Bushing Inserter

123365076
0851 6583: RNCC: 3 | RNVC: 2
8516583: RNCC: 5 | RNVC: 2

21 Nov 1994

5120-12-368-8101
Combination Box And Open End Wrench

123688101
40101414-TCS: RNCC: 3 | RNVC: 2

24 Apr 2006

5120-12-197-4377
Torque Wrench

121974377
5801411-4146: RNCC: 2 | RNVC: 2
5801411-4146: RNCC: 3 | RNVC: 2

24 Oct 1983

5120-12-357-8949
Combination Box And Open End Wrench

123578949
DIN3113-B34: RNCC: 2 | RNVC: 2
1952M34: RNCC: 3 | RNVC: 2
205-34: RNCC: 3 | RNVC: 2
1B-34: RNCC: 3 | RNVC: 2
14-34: RNCC: 3 | RNVC: 2
1838553: RNCC: 5 | RNVC: 2
6004150: RNCC: 5 | RNVC: 2
40103434: RNCC: 5 | RNVC: 2

8 Aug 2002

5120-12-172-6494
Dorn

121726494
142410: RNCC: 3 | RNVC: 2
131236: RNCC: 5 | RNVC: 2

3 Feb 1978

5120-12-191-9408
Box Wrench

121919408
66833500: RNCC: 3 | RNVC: 2

16 Mar 1982

5120-12-356-7140
Spanner Wrench

123567140
427589000700: RNCC: 3 | RNVC: 2

26 Mar 2002

5120-12-094-0320

5120-12-364-6761
Flat Tip Screwdriver

123646761
48202100-TCS: RNCC: 3 | RNVC: 2

20 Oct 2004

5120-12-345-2433
L Verstemmwerkzeug

123452433
60-4647: RNCC: 3 | RNVC: 2
RWG-161297: RNCC: 5 | RNVC: 9
4920-08956: RNCC: 6 | RNVC: 9

12 Feb 1998

5120-12-140-3287
Ph Schraubendreher

121403287
8045VDE: RNCC: 3 | RNVC: 2
1425: RNCC: 3 | RNVC: 2
560-3: RNCC: 3 | RNVC: 2
14250000: RNCC: 5 | RNVC: 2
1400616: RNCC: 5 | RNVC: 2
5M8936-225-95: RNCC: 5 | RNVC: 2
131725: RNCC: 5 | RNVC: 2
8045: RNCC: 5 | RNVC: 9
5M8936-220-84: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-172-9129
Dorn

121729129
VG95211-ML-121729129: RNCC: 2 | RNVC: 2
1X56 136 676: RNCC: 3 | RNVC: 2
1X56136676: RNCC: 5 | RNVC: 9

2 Mar 1978

5120-12-120-6590
Socket Wrench Socket

121206590
900A-11/16: RNCC: 3 | RNVC: 2
52A11-16: RNCC: 3 | RNVC: 2
50-6-11-16: RNCC: 3 | RNVC: 2
043316: RNCC: 5 | RNVC: 2
03430038: RNCC: 5 | RNVC: 2
00506329: RNCC: 5 | RNVC: 2
109818: RNCC: 5 | RNVC: 9
7800SZ11-16: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-172-5249
Swivel Knob Jeweler's Screwdriver

121725249
2003F-0,25X2X20: RNCC: 3 | RNVC: 2
106034: RNCC: 5 | RNVC: 2
2003F0-25X2X20: RNCC: 5 | RNVC: 9

23 Jan 1978

5120-12-188-9685
Socket Head Screw Socket Wrench Attachment Wrench Set

121889685
19J40: RNCC: 3 | RNVC: 2
19740: RNCC: 5 | RNVC: 9
19J40: RNCC: 5 | RNVC: 9

12 Aug 1981

5120-12-354-0309
Seal Inserter

123540309
731589011500: RNCC: 3 | RNVC: 2
731 589 01 15 00: RNCC: 5 | RNVC: 2

29 May 2001

5120-12-181-1316
Socket Wrench Socket

121811316
1088-11: RNCC: 3 | RNVC: 2

29 Oct 1979

5120-12-170-8412
Socket Head Screw Key

121708412
NO PRIMARY REF 12-170-8412: RNCC: 3 | RNVC: 2
250508: RNCC: 5 | RNVC: 2
250508: RNCC: 5 | RNVC: 9

17 Aug 1977

5120-12-384-1636
Box Wrench

123841636
WM 22829: RNCC: 3 | RNVC: 2

28 Jan 2011

5120-12-360-0235
Electrical Contact Remover

123600235
VG95236T04BA001: RNCC: 2 | RNVC: 2

28 Mar 2003

5120-12-360-8020
Montierhuelse

123608020
ESH: RNCC: 3 | RNVC: 2

11 Jul 2003

5120-12-342-2115
Ge Montierwerkzeug

123422115
1X56134259: RNCC: 3 | RNVC: 2

7 Jan 1997

5120-12-333-0707
Bearing And Bushing Inserter

123330707
15.001.20052: RNCC: 3 | RNVC: 2
03278: RNCC: 5 | RNVC: 2

26 Oct 1993

5120-12-308-4332
Socket Wrench Socket

123084332
S047-WS313: RNCC: 3 | RNVC: 2
7028: RNCC: 5 | RNVC: 2

9 Oct 1986

5120-12-163-3915
Hebevorrichtung

121633915
510195-330-00: RNCC: 2 | RNVC: 2
16-910-7601: RNCC: 5 | RNVC: 2
169107601: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-170-3364
Spanner Wrench

121703364
530201-0000.901: RNCC: 3 | RNVC: 2
530201-0000.901: RNCC: 5 | RNVC: 9
530201-0000901: RNCC: 5 | RNVC: 9

8 Jul 1977

5120-12-329-4567
Pliers

123294567
621-10405: RNCC: 3 | RNVC: 2

21 Aug 1992

5120-12-330-0606
Hydraulic Jack Handle

123300606
81668076016: RNCC: 3 | RNVC: 2
81.66807-6016: RNCC: 5 | RNVC: 2
81.66807-6018: RNCC: 5 | RNVC: 9
81668076018: RNCC: 5 | RNVC: 9

28 Oct 1992

5120-12-120-5967
Socket Wrench

121205967
TL5120-0128: RNCC: 2 | RNVC: 2
769-24BW: RNCC: 3 | RNVC: 2
TWH20-233: RNCC: 5 | RNVC: 2
TWH20-233: RNCC: 5 | RNVC: 2
4045810001: RNCC: 5 | RNVC: 2
05-364-12-02-0: RNCC: 5 | RNVC: 2
16620: RNCC: 5 | RNVC: 2
TWH20-233: RNCC: 5 | RNVC: 2
904041070100: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-334-9530
Open End Box Wrench

123349530
4900399-411110.06: RNCC: 2 | RNVC: 2
4900399-411110.06: RNCC: 3 | RNVC: 2

6 Jul 1994

5120-12-360-5997
Flat Tip Screwdriver

123605997
52734-060: RNCC: 3 | RNVC: 2
0005382530: RNCC: 3 | RNVC: 2

13 Jun 2003

5120-12-155-9501
Socket Wrench Handle

121559501
NM389-01: RNCC: 3 | RNVC: 2
NM389-01: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-332-8073
Op Montierwerkzeug

123328073
532113-8115.906: RNCC: 3 | RNVC: 2
532113-8115.906: RNCC: 5 | RNVC: 9

22 Sep 1993

5120-12-130-8004
Offset Screwdriver

121308004
C20407-Z7-A31: RNCC: 3 | RNVC: 2
C20407-A7-A31: RNCC: 5 | RNVC: 2
C20407A7A31: RNCC: 5 | RNVC: 2
C20407Z7A31: RNCC: 5 | RNVC: 2
TFS70-02373: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-126-1325

5120-12-351-2628
Torque Wrench

123512628
TA1J0720A: RNCC: 3 | RNVC: 2

6 Jul 2000

5120-12-158-7397
Pliers

121587397
DIN5244-140GERAUHT: RNCC: 2 | RNVC: 2
140DIN5244GERAUHT: RNCC: 5 | RNVC: 2
106594: RNCC: 5 | RNVC: 9
2665-140: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-378-2674
Screwdriver Bit Set

123782674
05059297001: RNCC: 3 | RNVC: 2
KRAFTFORM KOMPAKT 62: RNCC: 5 | RNVC: 2

24 Mar 2009

5120-12-381-1232
Engine Valve Seat Insert Knockout Tool

123811232
590589086100: RNCC: 3 | RNVC: 2

13 Jan 2010

5120-12-196-7384
Mechanical Puller

121967384
1X56122253: RNCC: 3 | RNVC: 2
0535791: RNCC: 5 | RNVC: 2
535791: RNCC: 5 | RNVC: 9

9 Aug 1983

5120-12-353-8480
Socket Wrench

123538480
001589440900: RNCC: 3 | RNVC: 2
001589440900: RNCC: 5 | RNVC: 2
001589440900: RNCC: 5 | RNVC: 2

15 May 2001

5120-12-150-8986

5120-12-070-0142

5120-12-091-2904

5120-12-316-3545
Ge Montierwerkzeug

123163545
2300279-6907.00: RNCC: 2 | RNVC: 2
2300279-6907.00: RNCC: 3 | RNVC: 2
9873290: RNCC: 5 | RNVC: 2
2300279-6906.00: RNCC: 5 | RNVC: 9
2300279-6906.00: RNCC: 5 | RNVC: 9
2300279-6907.00: RNCC: 5 | RNVC: 9
9 873 290: RNCC: 5 | RNVC: 9
9873290: RNCC: 5 | RNVC: 9
9890659: RNCC: 5 | RNVC: 9

12 Jan 1989

5120-12-352-0478
Socket Head Screw Key

123520478
ISO2936-4L: RNCC: 2 | RNVC: 2
07153120: RNCC: 3 | RNVC: 2

10 Oct 2000

5120-12-364-3448
Socket Wrench Adapter

123643448
12030001-TCS: RNCC: 3 | RNVC: 2

14 Sep 2004

5120-12-335-4090
Mechanical Puller

123354090
0851 7998: RNCC: 3 | RNVC: 2
8517998: RNCC: 5 | RNVC: 2

17 Aug 1994

5120-12-378-3451
Torque Screwdriver

123783451
775A/12: RNCC: 3 | RNVC: 2
51460012: RNCC: 5 | RNVC: 2

30 Mar 2009

5120-12-146-9897
Open End Wrench

121469897
NM283-05: RNCC: 3 | RNVC: 2
25035206: RNCC: 5 | RNVC: 2
NM283-05: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-361-1408
Pipe Wrench

123611408
36Z-140: RNCC: 3 | RNVC: 2

27 Aug 2003

5120-12-126-5418
Valve Spring Lifter

121265418
1875890131: RNCC: 3 | RNVC: 2
1875890131: RNCC: 3 | RNVC: 9
187589013100: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-023-1448

5120-12-094-1233

5120-12-390-7515
Socket Wrench Screwdriver Attachment

123907515
02050006-TCS: RNCC: 3 | RNVC: 2

7 Dec 2012

5120-12-154-3187
Schluessel

121543187
ZG4019G1: RNCC: 3 | RNVC: 9
ZG4019G001: RNCC: 5 | RNVC: 2
ZG4019G001: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-199-0782
Hand Terminal Crimping Tool

121990782
SL47GE4: RNCC: 3 | RNVC: 2
SL47GE4: RNCC: 5 | RNVC: 9

23 Mar 1984

5120-12-186-7320
Einsatz

121867320
99366617: RNCC: 3 | RNVC: 2
420051: RNCC: 5 | RNVC: 9
420051: RNCC: 5 | RNVC: 9

2 Feb 1981

5120-12-131-6217
Socket Wrench Handle Bar

121316217
200-28: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-176-3370

5120-12-345-3063
Ku Montierwerkzeug

123453063
550 589 05 31-100: RNCC: 3 | RNVC: 2

2 Mar 1998

5120-12-021-3544

5120-12-335-4108
Socket Wrench Socket

123354108
0852 4107: RNCC: 3 | RNVC: 2
8524107: RNCC: 5 | RNVC: 2

17 Aug 1994

5120-12-335-0984
Bearing And Bushing Inserter

123350984
F30271842: RNCC: 3 | RNVC: 2

22 Jul 1994

5120-12-353-8381
Pliers

123538381
65074160: RNCC: 3 | RNVC: 2

15 May 2001

5120-12-330-8361
Lamp Extractor

123308361
1.90900.008: RNCC: 3 | RNVC: 2

16 Feb 1993

5120-12-180-6450
Socket Wrench Handle Bar

121806450
P-895188-001: RNCC: 3 | RNVC: 2
P895188-001: RNCC: 5 | RNVC: 2

24 Sep 1979

5120-12-198-2232
Hand Tube Flaring Tool

121982232
NO PRIMARY REF 12-198-2232: RNCC: 3 | RNVC: 2
4910000: RNCC: 5 | RNVC: 2
2.6051: RNCC: 5 | RNVC: 9
4480Z: RNCC: 5 | RNVC: 9

2 Jan 1984

5120-12-121-5405
Wood Mallet

121215405
DIN7461-160: RNCC: 2 | RNVC: 2
160DIN7461: RNCC: 5 | RNVC: 2
300-3: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-174-6055
Inserted Hammer Face

121746055
TL5120-0126-A103: RNCC: 2 | RNVC: 2
3207050: RNCC: 3 | RNVC: 2
51233050: RNCC: 5 | RNVC: 2
220750: RNCC: 5 | RNVC: 9

13 Jul 1978

5120-12-336-5200
Bearing And Bushing Remover

123365200
2-861-46495: RNCC: 3 | RNVC: 2
2-861-46495: RNCC: 5 | RNVC: 2

22 Nov 1994

5120-12-379-4629
Woven Cable Grip

123794629
223.310: RNCC: 3 | RNVC: 2

27 Jul 2009

5120-12-172-1390
Hand Terminal Crimping Tool

121721390
8787954004: RNCC: 3 | RNVC: 9
729836IS: RNCC: 5 | RNVC: 2
3106: RNCC: 5 | RNVC: 9

22 Dec 1977

5120-12-163-8271
Mechanical Puller Attachment

121638271
20012: RNCC: 3 | RNVC: 2
83.09143-0147: RNCC: 5 | RNVC: 2
83091430147: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-345-3535
Spanner Wrench

123453535
009-124.110-006W1: RNCC: 3 | RNVC: 2

4 Mar 1998

5120-12-191-4898
Abdrueckvorrichtung

121914898
S4-1600411: RNCC: 3 | RNVC: 2
S4-1600411: RNCC: 5 | RNVC: 2
S4-1600411: RNCC: 5 | RNVC: 2
S4-1600411: RNCC: 5 | RNVC: 9

8 Feb 1982

5120-12-334-5214
Mechanical Puller Attachment

123345214
0852 0678.001: RNCC: 3 | RNVC: 2

19 May 1994

Load More Results