5120-12-319-9805

Nov 1989 3460-12-356-4827 Hold Down Machine Clamp P400RNCC: 3 | RNVC: 2 | DAC: 1 5 Mar 2002 5120-12-319-9805

2090-99-528-5268 2090995285268 995285268 PACKING PIECE

2090-99-528-5247 2090995285247 995285247 FAIRING PLATE

3120-99-560-3518 3120995603518 995603518 is an item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. it is designed for applications involving moving (kinetic) loads. except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. the thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. see also washer, flat and spacer, sleeve.

5315-99-661-8838 5315996618838 996618838 is a metallic item, usually square or rectangular in cross section, usually longer in relation to its width and thickness, with or without a head, usually designed to fit into the pre-cut slots of two adjacent cylindrically shaped members, to prevent relative rotational movement between the two. it may have mounting holes or slots.