5120-12-126-1583

DAC: 9 30 May 1969 5120-12-135-3932 Pliers 1342AIS0L200RNCC: 5 | RNVC: 9 | DAC: 9 30 May 1969 5120-12-126-1583

9 | DAC: 9 30 May 1969 5120-12-120-5767 Pliers 13-200RNCC: 5 | RNVC: 9 | DAC: 9 30 May 1969 5120-12-126-1583

9 | DAC: 9 30 Sep 1977 5120-12-124-2714 Pliers 855-200RNCC: 5 | RNVC: 9 | DAC: 9 30 May 1969 5120-12-126-1583

5310-15-206-1375 5310152061375 152061375 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

enable JavaScript in your web browser . 2990-12-134-1104Exhaust Pipe2990121341104 121341104 5167-71-13-140
1104 Greece (ZU) Turkey (ZW) Approved Sources 2990-12-134-1104 Part NumberManufacturerStatus5167-71-13-140