5120-12-123-5208

1969 5120-12-195-2672 Socket Wrench Handle 6606-582 265RNCC: 3 | RNVC: 2 | DAC: 3 31 Jan 1983 5120-12-123-5208

enable JavaScript in your web browser . 5330-01-218-6001Preformed Packing5330012186001 012186001 N0219 2-240
2-240 N219-70 A circular shaped item with an aperture manufactured to predetermined dimensions and designed
Approved Sources 5330-01-218-6001 Part NumberManufacturerStatusN0219 2-240 02697 - Parker-Hannifin Corp

4810-01-337-9738 4810013379738 013379738 is a valve having two or more ports with valve stem or pilot needle in a normally open or closed position. it is specifically designed to stop or start or change the flow of fluid by means of the magnetic action of an electric coil on a moveable core or plunger. the valve may be equipped with a manual opening or closing device. for items with three or more ports that utilize a reciprocating slide with recess areas which mate with ports in an integral or replaceable ported sleeve, see valve (1), linear, directional control. it may be inline or cartridge (manifold) design. excludes valve (1), butterfly.

5905-15-075-8464 5905150758464 150758464 is a resistor whose ohmic value cannot be adjusted or varied. the resistance element consists of either a thin layer of conductive material, containing either binders or insulating materials, deposited on an insulated form; or an alloy of metal and ceramic materials, usually fused to an insulated form. opposition to the flow of current is an inherent property of the materials used and is manifest by the heat dissipation in the resistor. see also attenuator, fixed and resistor, fixed, composition. excludes carbon composition type resistors.

5330-14-440-7154 5330144407154 144407154 is a pliable rubber, felt, leather, or composition ring-shaped element, split or solid; with or without spring or spreader, having a metal shell on all or a portion of at least two of the outer surfaces. it may be designed to be either bolt mounted or pressmounted between fixed and moveable parts to form a tight and effective seal by the pressure of the spring or spreader or the resiliency inherent in the element material. excludes packing with retainer.