What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.

What is a Grommet Inserting Punch And Die?

A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Blacksmith's Punch?

A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Tap Extractor?

A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Mechanical Finger?

A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

A Crowbar is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hand Caulking Tool?

A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Screwdriver And Wrench Assembly?

A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Drill Drift?

A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

What is a Fuse Puller?

A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.

What is a Hand Lead Seal Press?

A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.

What is a Hand Beading Tool?

A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.

Hand Tools, Nonedged, Nonpowered - Germany (DE)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by Germany (DE) - NCB is 12

Page 51 of 62

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by Germany

51	20	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - Germany (DE)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 15 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Hand Vise? 31 Items: A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.
What is a Grommet Inserting Punch And Die? 25 Items: A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.
What is a Hand Hydraulic Jack? 111 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 93 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 587 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 13 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
What is a Hand Tube Flaring Tool? 32 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Blacksmith's Punch? 17 Items: A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.
What is a Drain Plug Wrench? 21 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 76 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 14 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 1670 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
What is a Pipe Wrench? 54 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 165 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 55 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
What is a Tap Extractor? 13 Items: A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.
Screwdriver,Offset 77 Items
What is a Screwdriver Bit? 446 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Mechanical Finger? 17 Items: A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.
What is a Socket Wrench Socket? 1303 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 876 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 1273 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 17 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 282 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
What is a Hand Tube Bender? 49 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 669 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 39 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pinch Bar? 17 Items: A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.
What is a Wrecking Bar? 10 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Crowbar? 12 Items: A Crowbar is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 356 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 484 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 37 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 110 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
What is a Hand Caulking Tool? 13 Items: A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.
Face,Hammer,Inserted 54 Items
What is a Hole Sheet Metal Holder? 40 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Screwdriver And Wrench Assembly? 10 Items: A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.
What is a Hand Rivet Set? 62 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Drill Drift? 11 Items: A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.
What is a Socket Wrench Handle Bar? 160 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Stake,Sheet Metalworking 33 Items
Riveter,Blind,Hand 31 Items
What is a Hand Shovel? 24 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 37 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 20 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
Block,Dolly,Sheet Metalworking 33 Items
What is a Piston Ring Compressor? 61 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Fuse Puller? 22 Items: A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.
What is a Hand Lead Seal Press? 12 Items: A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.
What is a Hand Beading Tool? 54 Items: A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.
What is a Hand Hammer? 406 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
Head,Hand Hammer 11 Items
What is a Lamp Extractor? 95 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Carpenters' Pincers? 16 Items: A Carpenters' Pincers (PINCERS,CARPENTERS') is a plierlike hand tool having two opposing jaws which may have hammerlike backs. One handle has a nail or tack pulling claw, the other is shaped to form a screwdriver. The tool may contain a wire cutter. See also NIPPERS, END CUTTING and PINCERS, FARRIERS'.
What is a Farrier's Pincers? 20 Items: A Farrier's Pincers (PINCERS,FARRIER'S) is a plierlike hand tool having two opposing jaws which are designed for removing horseshoes. The handles may have plain or ball ends. See also NIPPERS, END CUTTING and PINCERS, CARPENTERS'.
What is a Hand Pipe And Sewer Auger? 15 Items: A Hand Pipe And Sewer Auger (AUGER,PIPE AND SEWER,HAND) is a flexible spring wire or tape, with a cleaning or boring head at one or both ends. A handle may be provided for turning and pushing. It may also include a metal housing and/or reel in which the tape is coiled. Excludes AUGER, WATER CLOSET, HAND.
What is a Hand Roller? 23 Items: A Hand Roller (ROLLER,HAND) is a hand-held item consisting of a roller on an axle attached to a handle. The width of the roller face (surface) is more than 1/4 inch. See also STITCHER, CEMENTING AND VULCANIZING. Excludes INKING ROLLER, HAND and paint rollers.
What is a Trowel? 36 Items: A Trowel is a tool used for bricklaying, concrete work, plastering, linoleum laying, and masonry work. Excludes CORNER TOOL, CONCRETE.
What is a Hand Abrasive Wheel Dresser? 11 Items: A Hand Abrasive Wheel Dresser (DRESSER,ABRASIVE WHEEL,HAND) is a tool designed to remove glaze from, dress, shape, sharpen, and true solid abrasive wheels. Excludes NIB, DIAMOND, WHEEL DRESSING.
What is a Lamp Cap Extractor? 26 Items: A Lamp Cap Extractor (EXTRACTOR,LAMP CAP) is a tool specifically designed to facilitate the removal of lamp caps from switchboards, panels or indicator lamps.
Replacing Tool,Engine Valve Seat Insert 10 Items
What is a Rivet Bucking Bar? 20 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 154 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 175 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Woven Cable Grip? 30 Items: A Woven Cable Grip (GRIP,CABLE,WOVEN) is a braided wire device designed to clutch a bare or insulated conductor, cable or wire rope, for holding taut or drawing through conduit.
What is a Screw Thread Insert Extractor? 16 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is a Hand Helical Spring Puller Hook? 12 Items: A Hand Helical Spring Puller Hook (HOOK,HELICAL SPRING PULLER,HAND) is a hook whose curved end conforms to Style AP10 of Reference Drawing Group AP.
What is an Electron Tube Extractor? 12 Items: An Electron Tube Extractor (EXTRACTOR,ELECTRON TUBE) is a hand tool designed to facilitate the removal of electron tubes from electronic equipment and to avoid burning the fingers. It may be used for installing tubes.
What is a Cross Tip Screwdriver? 224 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 208 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 61 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 163 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Tool Handle Wedge? 42 Items: A Tool Handle Wedge (WEDGE,TOOL HANDLE) is excludes WEDGE, WOOD.
What is a Valve Tappet Adjusting Tool? 14 Items: A Valve Tappet Adjusting Tool (ADJUSTING TOOL,VALVE TAPPET) is a hand device for adjusting overhead valve tappets of internal combustion engines. It consists of a handle, and at one end a wrench opening or a drive for a replaceable wrench socket, and a knob operated screwdriver tip. The wrench opening (or socket) engages the tappet adjusting screw lock nut and the screwdriver engages the screw.
What is a Hand Powered Poppet Valve Lapper? 16 Items: A Hand Powered Poppet Valve Lapper (LAPPER,POPPET VALVE,HAND POWERED) is a hand tool designed to rotate and/or oscillate poppet type valves in their seats for reseating purposes.
What is a Marlinespike? 11 Items: A Marlinespike is a metal hand tool made in the shape of a tapered pin. One end is pointed and the opposite end may be headed. The body may contain an eye for a lanyard sling, or be grooved lengthwise. Excludes CABLE PICK and FID.
What is an Aligning Punch? 104 Items: An Aligning Punch (PUNCH,ALIGNING) is a round, square, hexagonal or octagonal bodied hand tool, having a round tapered section 6-1/2 inches (165.1 mm) or more in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, DRIFT and DRIFTPIN.
What is a Drift Punch? 39 Items: A Drift Punch (PUNCH,DRIFT) is a round, square, hexagonal, or octagonal bodied hand tool, having a round tapered section 4 to 6 inches (101.6 mm to 152.4 mm) inclusive in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, ALIGNING; and DRIFTPIN.
What is a Socket Wrench Adapter-Extension? 11 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 21 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 149 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Wrench Extension Handle? 36 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Crowfoot Wrench Head Socket? 13 Items: A Crowfoot Wrench Head Socket (SOCKET,CROWFOOT WRENCH HEAD) is a component with an open-wall opening having one end designed to fit into a HEAD, CROWFOOT SOCKET WRENCH and the other end having an internal opening such as hexagonal or 8-point. See also CROWFOOT ATTACHMENT, SOCKET WRENCH.
What is a Socket Wrench Crowfoot Attachment? 267 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 18 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 40 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 35 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 998 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 350 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 102 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 468 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 42 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand-Operated Grommet And Eyelet Press? 14 Items: A Hand-Operated Grommet And Eyelet Press (PRESS,GROMMET AND EYELET,HAND-OPERATED) is a device which punches or pierces holes and in addition fastens or sets eyelets and grommets in cloth, paper and similar material. May be used for fastening or setting rivets, lacing hooks and snaps in cloth, paper and similar material. It is hand operated by lever or screw action. See also PUNCH, EYELET, PLIER TYPE and PRESS, GROMMET AND EYELET, FOOT OPERATED.
What is a Claw Bar? 27 Items: A Claw Bar (BAR,CLAW) is before using, refer to Reference Drawing Group AG.
What is a Pin Vise? 12 Items: A Pin Vise (VISE,PIN) is a clamping device used to hold small items which are usually round. The device consists of a hollow handle having a chuck at one or both ends. The longitudinal axis of the hollow handle is in alignment with that of the chuck(s).
What is a Dapping Punch? 16 Items: A Dapping Punch (PUNCH,DAPPING) is an item consisting of steel bar having one end ball shaped. It is used to form flat metal sheets into a hemispherical shape by working it against a die and striking the opposite end of punch with a hammer.
What is a Tire Iron? 29 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 123 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Machinist's Vise? 64 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Clamp Base Bench Vise? 10 Items: A Clamp Base Bench Vise (VISE,BENCH,CLAMP BASE) is a clamping device consisting of a base, one stationary and one manual screw actuated jaw, and one or more guide bars or rods. Designed with an integral clamp for attaching to a bench, table, or the like. Does not include pipe holding jaws.
What is a Fixed Open End Wrench Set? 61 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Socket Wrench Set? 241 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is a Combination Box And Open End Wrench Set? 48 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Box Wrench Set? 32 Items: A Box Wrench Set (WRENCH SET,BOX) is a group of box wrenches having different characteristics. It may include a HANDLE, EXTENSION WRENCH. See also WRENCH SET, COMBINATION, BOX AND OPEN END.
Spoon,Body And Fender 15 Items
What is a Wrench Kit? 26 Items: A Wrench Kit is an assortment of various types and sizes of wrenches such as SOCKET, SOCKET WRENCH; WRENCH, OPEN END, FIXED; WRENCH, BOX and the like. It may include adapter(s), ratchet(s) and the like. See also WRENCH SET (as modified.
What is a Screw Extractor Set? 14 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 24 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
Jack,Scissors,Hand 17 Items
Pick,Digging 13 Items
What is a Hand Intrenching Tool? 13 Items: A Hand Intrenching Tool (INTRENCHING TOOL,HAND) is a shovel type tool or a pick and shovel combination having standard cutting blade edges or specially designed blade edges for cutting and chopping. It may have a handgrip on the handle. It is designed to be used by individual soldiers primarily for intrenching. Refer to Reference Drawing Group BG for styles.
What is a Piston Ring Expander? 28 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
What is a Joint Breaking Wedge? 12 Items: A Joint Breaking Wedge (WEDGE,JOINT BREAKING) is refer to Reference Drawing Group A before using item name.
Blade,Saddler's Harness Awl 15 Items
Mallet,Rubber 11 Items
What is a Rack Bar Jack? 24 Items: A Rack Bar Jack (JACK,RACK BAR) is excludes JACK, BUMPER and JACK, REEL, HAND.
What is a Hand Tube Flaring Punch? 15 Items: A Hand Tube Flaring Punch (PUNCH,TUBE FLARING,HAND) is a noncutting tool having a shaped end or section designed to flare the ends of tubes. One type is designed to flare the ends of tubes against a tube sheet, and another to flare tube ends to mate with tube fittings. Includes punch components of FLARING TOOL, TUBE, HAND.
What is a Hose Strap Band Clamping Tool? 14 Items: A Hose Strap Band Clamping Tool (CLAMPING TOOL,STRAP BAND,HOSE) is an item designed to tension and lock metal straps around a rubber hose, and the like. It is also used to clamp and hold fittings therein.
What is a Socket Wrench Handle Ratchet Head? 15 Items: A Socket Wrench Handle Ratchet Head (RATCHET HEAD,SOCKET WRENCH HANDLE) is a reversible ratcheting mechanism having a square external end designed to fit into the internal end of a wrench socket or attachment, and has provisions for a round bar grip, but does not include the bar. When furnished with a bar, see HANDLE, SOCKET WRENCH. Excludes RATCHET ATTACHMENT, SOCKET WRENCH.
What is an Etching Needle? 10 Items: An Etching Needle (NEEDLE,ETCHING) is a styluslike tool mounted in a handle. It is used in preparing metal lithographic plates and photo engravings. See also ETCHING POINT.
What is a Mechanical Puller? 1147 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 505 Items
What is a Slip Joint Pliers? 95 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Jewelers' Pliers? 11 Items: A Jewelers' Pliers (PLIERS,JEWELERS') is a tool having jaws designed for use in the assembly and repair of jewelry, watches, and the like. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 112 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 14 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 16 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 35 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 19 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 32 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 73 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Refrigeration Valve Stem Wrench Socket? 10 Items: A Refrigeration Valve Stem Wrench Socket (SOCKET,WRENCH,REFRIGERATION VALVE STEM) is an item having a 1/4 inch (6.3 mm) square external drive on one end, and a square internal opening at the other end. The outside diameter is specially sized to clear openings in refrigeration valve bonnets and covers for reaching recessed stems. It is designed for use with a ratchet wrench for opening and/or closing square stem refrigeration valves.
What is a Drive Pin Punch Set? 27 Items: A Drive Pin Punch Set (PUNCH SET,DRIVE PIN) is a group of PUNCH, DRIVE PIN having different characteristics.
What is a Mechanical Puller Step Plate? 72 Items: A Mechanical Puller Step Plate (STEP PLATE,MECHANICAL PULLER) is a circular disk, flanged to provide a shoulder, and designed to provide a base for the screw point of a PULLER, MECHANICAL when pulling externally mounted bearings, gears, and the like from hollow shafts or housings. It has a concentric, countersunk hole to accommodate the puller screw point.
What is a Solid Center Punch? 26 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Cable Type Ratchet Lever Puller? 34 Items: A Cable Type Ratchet Lever Puller (PULLER,RATCHET LEVER,CABLE TYPE) is an item consisting of a metal frame and ratchet lever reel to which is attached one end of a flexible cable (wire rope). The cable feeds through the fast eye in the metal frame, and may be reeved through a slip hook tackle hook. See also BINDER, LOAD; HOIST, WIRE ROPE and STRETCHER, WIRE.
What is a Hand Yoke Riveter? 13 Items: A Hand Yoke Riveter (RIVETER,YOKE,HAND) is a hand tool designed to install metallic grommets and/or tubular rivets by forcing the unflanged end of the grommet/rivet outward to form another flange which prevents the grommet/rivet from coming out of the item it has been installed in. The tool uses a pliers type pinching action to form the flange. See also PUNCH, EYELET, PLIER TYPE.
What is a Hand Material Handling Hook? 17 Items: A Hand Material Handling Hook (HOOK,MATERIAL HANDLING,HAND) is a hook whose curved end conforms to Style AP1, AP2, AP3 or AP4 of Reference Drawing Group AP. Excludes HOOK, MANHOLE COVER, HAND; HOOK, WIRE BREAKING, HAND; HOOK, ROCK CRUSHER FEEDING, HAND; HOOK, STRAINER REMOVING, HAND and HOOKS, BAG HANDLING, HAND.
What is a Magnetic Retrieving Tool? 22 Items: A Magnetic Retrieving Tool (RETRIEVING TOOL,MAGNETIC) is a hand-operated magnetic device used to locate and pick up metallic articles, such as bolts, nuts, pins, washers, and the like, in confined spaces. It may be rigid, flexible or adjustable. Excludes FINGER, MECHANICAL.
What is a Mechanical Puller Adapter? 68 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Socket Head Screw Socket Wrench Attachment Wrench Set? 10 Items: A Socket Head Screw Socket Wrench Attachment Wrench Set (WRENCH SET,SOCKET HEAD SCREW SOCKET WRENCH ATTACHMENT) is an assortment of various size SOCKET WRENCH ATTACHMENT, SOCKET HEAD SCREW, and HANDLE, SOCKET WRENCH. It may include universal joints, ratcheting adapters and other attachments used therewith.
What is a Mechanical Puller Forcing Screw? 66 Items: A Mechanical Puller Forcing Screw (FORCING SCREW,MECHANICAL PULLER) is a cylindrical, threaded item which may be headed or headless. It may include a threadless portion. All or part of the unthreaded portion(s) must be of a single diameter equal to or smaller than the maximum major diameter of the threaded portion(s). Headless items must have an external or internal wrenching feature or have a provision to facilitate turning. The item must be designed to exert pressure by screwing motion when used with a mechanical puller.
What is a Screw Thread Insert Inserter? 66 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Flat Tip Screwdriver Set? 18 Items: A Flat Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP) is a group of SCREWDRIVER, FLAT TIP having different characteristics.
What is a Terminal Crimping Tool Contact Positioner? 16 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 25 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is a Screw Thread Insert Tang Breakoff Tool? 37 Items: A Screw Thread Insert Tang Breakoff Tool (TANG BREAKOFF TOOL,SCREW THREAD INSERT) is a punch designed to fit within a coiled wire thread insert to manually or mechanically break off the tang by which the insert was threaded into the hole.
What is a Multiposition Vise? 11 Items: A Multiposition Vise (VISE,MULTIPOSITION) is a clamping device consisting of a workholding head and a base provided with swiveling, tilting, and locking arrangement. Designed to be bolt mounted to a bench, table, or the like and constructed so that the workholding head can be swiveled 360 degrees (6.3 radians) in a horizontal plane and tilted from a normal level position downward at least 90 degrees (1.6 radians), and locked in any desired position within the swiveling and tilting ranges. Intended for use in manufacturing and maintenance of mechanical and electronic parts and assemblies or any light bench work. See also VISE, PATTERNMAKER'S.
What is an Adjustable Wrench? 84 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 177 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 40 Items
Handle,Shovel 22 Items
What is a Torque Wrench Set? 13 Items: A Torque Wrench Set (WRENCH SET,TORQUE) is an assortment or two or more torque wrenches or various sizes. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH; and BIT, SCREWDRIVER.
What is a Retaining Ring Installation Tool? 12 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Bearing And Bushing Inserter? 626 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 59 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 466 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 23 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 18 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 80 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 23 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 12 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 12 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Seal Inserter And Remover? 42 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 158 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is an Electrical Contact Inserter And Remover? 21 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Pin Inserter? 28 Items: A Pin Inserter (INSERTER,PIN) is a hand tool designed to facilitate the insertion of a pin into a hole.
What is a Piston Inserter? 39 Items: A Piston Inserter (INSERTER,PISTON) is a tool designed to permit installation of a piston or piston assembly without damaging the packings or piston.
What is a Spring Inserter And Remover? 23 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 11 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Stud Inserter? 20 Items: A Stud Inserter (INSERTER,STUD) is a device designed to drive in studs. It does not have any facilities for removing or extracting studs. See also INSERTER AND REMOVER, STUD.
What is a Stud Inserter And Remover? 13 Items: A Stud Inserter And Remover (INSERTER AND REMOVER,STUD) is a group of items designed to extract and to drive studs. It may include collets, guides, housings, holders and the like. See also REMOVER SET, STUD and INSERTER, STUD.
What is a Gear Inserter? 10 Items: A Gear Inserter (INSERTER,GEAR) is a hand tool designed to install various gears onto a gearshaft. It may be operated by a pushing or a striking force.
What is a Crimping Tool Die? 145 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is an Electrical Connector Inserter? 10 Items: An Electrical Connector Inserter (INSERTER,ELECTRICAL CONNECTOR) is a hand tool designed to hold an electrical connector, and to assist in the positioning and installation of the connector on a cover, panel or the like.
What is a Float? 11 Items: A Float is a tool used for concrete, plastering and grouting work.
What is a Mechanical Puller Set? 19 Items: A Mechanical Puller Set (PULLER SET,MECHANICAL) is two or more separate PULLER, MECHANICAL of different fixed sizes.
What is a Lifting Pneumatic Bag? 28 Items: A Lifting Pneumatic Bag (PNEUMATIC BAG,LIFTING) is a device made of flexible material designed to lift another item by being placed under the item and being inflated with air or some other gas. It will have a means of being connected to an air or gas source and may include a connector hose, a control valve and/or a pressure regulator.
What is a Lifting Pneumatic Bag Kit? 12 Items: A Lifting Pneumatic Bag Kit (PNEUMATIC BAG KIT,LIFTING) is a collection of items consisting of two or more PNEUMATIC BAG, LIFTING, connecting cords, lanyards, feeding hoses and the like required for lifting an item when normal jacking conditions are not applicable. May include items for packaging the individual parts.
What is a Bearing Staking Installation Tool? 14 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
What is a Sealant Dispenser? 15 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Retaining Ring Pliers Set? 10 Items: A Retaining Ring Pliers Set (PLIERS SET,RETAINING RING) is a group of PLIERS, RETAINING RING having different characteristics.
What is a Pedal Adjustment Tool Compressor? 38 Items: A Pedal Adjustment Tool Compressor (COMPRESSOR,TOOL,PEDAL ADJUSTMENT) is a hand tool having hinged leverage handles designed to compress both ends of a spring to facilitate installation.
What is a Plug Electrical Connector Extractor? 20 Items: A Plug Electrical Connector Extractor (EXTRACTOR,ELECTRICAL CONNECTOR,PLUG) is a hand tool designed to disassemble CONNECTOR, PLUG, ELECTRICAL from a CONNECTOR, RECEPTACLE, ELECTRICAL.
What is a Screwdriver Handle? 12 Items: A Screwdriver Handle (HANDLE,SCREWDRIVER) is an item used to accommodate various types of BIT, SCREWDRIVER. It is designed to rotate a bit that is used for installing or removing screws.
What is a Wire Twister Pliers? 11 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 313 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is a Flat Tip And Cross Tip Screwdriver Set? 22 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is an Oil Filter Wrench? 14 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 442 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Rotating Members Aligning Tool? 29 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
Arm,Handling Tool 16 Items
What is a Splicing Sleeve Compressing Tool? 11 Items: A Splicing Sleeve Compressing Tool (COMPRESSING TOOL,SPLICING SLEEVE) is a hand tool having hinged leverage handles similar to a CUTTER, BOLT or pliers, designed to compress a splicing sleeve when joining the ends of two conductors, or when forming an eye splice in the end of a wire rope. Excludes CRIMPING TOOL, TERMINAL, HAND.
Handle,Hydraulic Jack 30 Items
What is a Manual Impact Wrench? 17 Items: A Manual Impact Wrench (WRENCH,IMPACT,MANUAL) is a manually operated handheld tool consisting of spring-loaded handle and a power-impact head which delivers a torsional impact from either continuous movement of the handle in one direction, or by a reciprocating action. It is used in tightening and loosening fasteners, such as bolts, nuts, and the like. The item may include sockets, extensions and offset fittings, nut runners, and the like.
What is a Torque Screwdriver? 15 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.

Stock Items From Supply Class 5120 Page 51 of 62

5120-12-198-3942
Ph Schraubendreher

121983942
255/9: RNCC: 3 | RNVC: 2
V22199-Z-C187: RNCC: 5 | RNVC: 2
V22199ZC187: RNCC: 5 | RNVC: 2

24 Jan 1984

5120-12-372-7439
Socket Wrench Set

123727439
40AD/10/8: RNCC: 3 | RNVC: 2
96015306: RNCC: 5 | RNVC: 2

16 Aug 2007

5120-12-371-5387
Hand Hammer

123715387
FL 0060: RNCC: 3 | RNVC: 2
H-60: RNCC: 5 | RNVC: 2

16 Apr 2007

5120-12-166-2019
Torque Wrench

121662019
NO PRIMARY REF 12-166-2019: RNCC: 3 | RNVC: 2
51010001: RNCC: 5 | RNVC: 9
76-1: RNCC: 5 | RNVC: 9
76NM/1: RNCC: 5 | RNVC: 9

12 Aug 1976

5120-12-168-6482
Offset Screwdriver

121686482
4900071-004000: RNCC: 3 | RNVC: 2
4900071-004000: RNCC: 5 | RNVC: 2
105612U: RNCC: 5 | RNVC: 9

25 Mar 1977

5120-12-367-6193
Box Wrench

123676193
TL5120-0074-145: RNCC: 2 | RNVC: 2
DIN838-18X21: RNCC: 5 | RNVC: 9
775579: RNCC: 5 | RNVC: 9

13 Sep 2005

5120-12-183-0987
Dorn

121830987
4190432: RNCC: 3 | RNVC: 2

20 Mar 1980

5120-12-041-2679

5120-12-155-9416
Socket Wrench Handle Bar

121559416
NM212-04: RNCC: 3 | RNVC: 2
NM212-04: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-139-3012
Ein- Und Ausziehvor

121393012
8205891933: RNCC: 3 | RNVC: 2
006M00300: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-187-9653
Hand Terminal Crimping Tool

121879653
NO PRIMARY REF 12-187-9653: RNCC: 3 | RNVC: 2
4978.0: RNCC: 5 | RNVC: 2
PZ2: RNCC: 5 | RNVC: 9

20 May 1981

5120-12-133-3964
Screwdriver Bit

121333964
NO PRIMARY REF 12-133-3964: RNCC: 3 | RNVC: 2
109049: RNCC: 5 | RNVC: 9
6988M7: RNCC: 5 | RNVC: 9
6988M8X0-90: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-368-1978
Inspection Mirror

123681978
77400001-TCS: RNCC: 3 | RNVC: 2

5 Jan 2006

5120-12-146-7424

5120-12-357-2261
Jack Elevating Block

123572261
LSS12: RNCC: 3 | RNVC: 2

23 May 2002

5120-12-188-7192
Torque Wrench Adapter

121887192
R809227: RNCC: 3 | RNVC: 2
809227: RNCC: 5 | RNVC: 2
RS0E15: RNCC: 5 | RNVC: 2
000589250100: RNCC: 5 | RNVC: 2
S0E15: RNCC: 5 | RNVC: 9

27 Jul 1981

5120-12-123-5528

5120-12-020-5620

5120-12-379-0899
Claw Bar

123790899
0112010048: RNCC: 3 | RNVC: 2
112.01-1200: RNCC: 5 | RNVC: 2

23 Jun 2009

5120-12-371-4344
Hand Hammer

123714344
5027.98.3000: RNCC: 3 | RNVC: 2
5027983000: RNCC: 5 | RNVC: 2

28 Mar 2007

5120-12-198-7524
Lager- Und Einsatz

121987524
5870058079: RNCC: 3 | RNVC: 2
026056: RNCC: 5 | RNVC: 2
5870058079: RNCC: 5 | RNVC: 9

23 Feb 1984

5120-12-196-9689
Eindrueckwerkzeugte

121969689
1120-31547W1.02: RNCC: 3 | RNVC: 2

6 Sep 1983

5120-12-163-6613
Abziehvorrichtung

121636613
26-21C1109G001: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-367-8515
Plier Clamp

123678515
9862-200: RNCC: 3 | RNVC: 2

24 Oct 2005

5120-12-179-0305
Socket Wrench

121790305
32-390-066: RNCC: 3 | RNVC: 2
31-390-066: RNCC: 5 | RNVC: 2
31390066: RNCC: 5 | RNVC: 2
32390066: RNCC: 5 | RNVC: 2

30 May 1979

5120-12-141-9646
Socket Head Screw Key

121419646
571F002BL3-8IN: RNCC: 3 | RNVC: 2
1997LZ3-8: RNCC: 3 | RNVC: 2
1059132: RNCC: 5 | RNVC: 2
6308L3-8IN: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-174-7376
Schluesseleinsatzsa

121747376
NO PRIMARY REF 12-174-7376: RNCC: 3 | RNVC: 2
4115-4-1-8: RNCC: 5 | RNVC: 9
4115Z4A: RNCC: 5 | RNVC: 9
149519: RNCC: 5 | RNVC: 9
157759: RNCC: 5 | RNVC: 9

25 Jul 1978

5120-12-126-4601
Stabbing Awl

121264601
967V160MITGRIFF: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-315-4366
Seal Inserter

123154366
4987061: RNCC: 3 | RNVC: 2

21 Oct 1988

5120-12-130-3383
Tap And Reamer Extension

121303383
DIN377-14: RNCC: 2 | RNVC: 2
83334: RNCC: 3 | RNVC: 2
207116: RNCC: 3 | RNVC: 2
807-14-5: RNCC: 3 | RNVC: 2
3110-14-5: RNCC: 3 | RNVC: 2
14,5DIN377: RNCC: 5 | RNVC: 2
14-5DIN377: RNCC: 5 | RNVC: 9
4826-14-5: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-345-9718
Auswechselwerkzeug

123459718
3015R-009110.000.0: RNCC: 2 | RNVC: 2
3015R-009110.000.0: RNCC: 3 | RNVC: 2

25 May 1998

5120-12-146-2959
Auswechselwerkzeug

121462959
25704-360370.00.0: RNCC: 2 | RNVC: 2
25704-360370.00.0: RNCC: 3 | RNVC: 2
25704-360370-00-0: RNCC: 5 | RNVC: 2
25704-360370.00.0: RNCC: 5 | RNVC: 2
25704-360370-00-0: RNCC: 5 | RNVC: 2
25704-360370-00-0: RNCC: 5 | RNVC: 9
25704-360370.00.0: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-126-3131
Socket Wrench Set

121263131
TL5120-0057: RNCC: 2 | RNVC: 2
96060107: RNCC: 5 | RNVC: 9
5120-0057: RNCC: 5 | RNVC: 9
5120-057: RNCC: 5 | RNVC: 9
60-60A17-7: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-134-3259
Verbindungsstueck

121343259
CH1309-1-11-2: RNCC: 3 | RNVC: 2
3-415-0-018-021-4: RNCC: 5 | RNVC: 2
1205 1854: RNCC: 5 | RNVC: 2
26-50-58-4: RNCC: 5 | RNVC: 9
3-415-0-018-021-4: RNCC: 5 | RNVC: 9
CH1309-1-11-2: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-191-5804
Mechanical Puller

121915804
71-008-A2: RNCC: 3 | RNVC: 2

11 Feb 1982

5120-12-334-5850
Hand Tamper

123345850
702-150141-000-0: RNCC: 3 | RNVC: 2

26 May 1994

5120-12-377-0311
Torque Wrench Adapter

123770311
725QR/10: RNCC: 3 | RNVC: 2
58253010: RNCC: 5 | RNVC: 2

8 Dec 2008

5120-12-377-5459
Mecha Ejector Tool

123775459
313180: RNCC: 3 | RNVC: 2
5387-02-00-03/37: RNCC: 5 | RNVC: 2

23 Jan 2009

5120-12-141-9645
Socket Head Screw Key

121419645
571F002BL5-16IN: RNCC: 3 | RNVC: 2
1997L-Z5/16: RNCC: 3 | RNVC: 2
1059125: RNCC: 5 | RNVC: 2
6308L5-16IN: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-364-8604
Socket Wrench Crowfoot Attachment

123648604
02200046-TCS: RNCC: 3 | RNVC: 2

9 Nov 2004

5120-12-385-3913
Socket Wrench Spanner Attachment

123853913
1X36 166 807: RNCC: 3 | RNVC: 2

30 May 2011

5120-12-346-9780
Craftsman's Tweezers

123469780
9277150: RNCC: 3 | RNVC: 2

7 Oct 1998

5120-12-370-9372
Swivel Knob Jeweler's Screwdriver

123709372
6645-8X150: RNCC: 3 | RNVC: 2

18 Jan 2007

5120-12-192-1094
Offset Screwdriver

121921094
DIN5208-PZ-3X4: RNCC: 2 | RNVC: 2
224-3X4X200: RNCC: 3 | RNVC: 2
34134000: RNCC: 3 | RNVC: 2
TVA5120-2-263-022: RNCC: 5 | RNVC: 1
TVA5120-2-263-022-1.1.11: RNCC: 5 | RNVC: 2

23 Mar 1982

5120-12-368-2427
Screwdriver Bit

123682427
05072065001: RNCC: 3 | RNVC: 2
800/1Z-1,6X8,0X25: RNCC: 5 | RNVC: 2
072065: RNCC: 5 | RNVC: 9

13 Jan 2006

5120-12-144-2093
Open End Box Wrench

121442093
837589060300: RNCC: 3 | RNVC: 2
8375890603: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-173-8793
Cross Tip Screwdriver

121738793
332-2X75: RNCC: 3 | RNVC: 2
TVA5120-2-263-042-1.1.2: RNCC: 5 | RNVC: 2
332-2: RNCC: 5 | RNVC: 9

17 May 1978

5120-12-120-6797
Slip Joint Pliers

121206797
DIN5231-B115GERAUHT: RNCC: 2 | RNVC: 2
760-1: RNCC: 3 | RNVC: 2
B115DIN5231GERAUHT: RNCC: 5 | RNVC: 2
820-040-120: RNCC: 5 | RNVC: 9
97-120: RNCC: 5 | RNVC: 9
08090: RNCC: 5 | RNVC: 9
5371980002: RNCC: 5 | RNVC: 9
760VKH1: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-141-9785
Open End Wrench

121419785
571A203B15-16IN: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-133-3701
Box Wrench

121333701
1300Z1-4X5-16: RNCC: 3 | RNVC: 2
103997: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-123-5286
Box Wrench

121235286
380-5/16X3/8: RNCC: 3 | RNVC: 2
475-5/16X3/8: RNCC: 3 | RNVC: 2
2-5-16X3-8AF: RNCC: 3 | RNVC: 2
TVA5120-2-263-031.1.1.29: RNCC: 5 | RNVC: 2
00475660982: RNCC: 5 | RNVC: 2
380-5-16X3-8: RNCC: 5 | RNVC: 2
2-406: RNCC: 5 | RNVC: 9
2-5-16X3-8: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-020-5571

5120-12-126-3125

5120-12-328-4261
Driftpin

123284261
F30279932: RNCC: 3 | RNVC: 2
JUSTIERDORN: RNCC: 5 | RNVC: 9

16 May 1992

5120-12-126-5984

5120-12-332-8080
Op Montierwerkzeug

123328080
532113-8196.904: RNCC: 3 | RNVC: 2
532113-8196.904: RNCC: 5 | RNVC: 9

22 Sep 1993

5120-12-023-0177

5120-12-391-2821
Socket Wrench Adapter

123912821
15030003-TCS: RNCC: 3 | RNVC: 2

1 Mar 2013

5120-12-024-6358

5120-12-382-0060
Torque Wrench

123820060
1115880: RNCC: 3 | RNVC: 2

27 Apr 2010

5120-12-157-6772
Kabelschuhh Matrize

121576772
B50WHK5: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-359-2544
Spanner Wrench

123592544
5120-9460-200: RNCC: 3 | RNVC: 2

15 Jan 2003

5120-12-325-0597
Plier Clamp

123250597
137PA: RNCC: 3 | RNVC: 2
640719: RNCC: 5 | RNVC: 2
CSDE/CHK/GSS/156: RNCC: 5 | RNVC: 2
137PA: RNCC: 5 | RNVC: 2

26 Apr 1991

5120-12-700-3673
Pliers

127003673
51-081301044: RNCC: 2 | RNVC: 2

14 Apr 1992

5120-12-380-2856
Screwdriver Bit

123802856
00577: RNCC: 3 | RNVC: 2
269-0,4X2,0-0,6X3,5: RNCC: 5 | RNVC: 2

15 Oct 2009

5120-12-135-5955
Sailmaker's Pricker

121355955
TL5120-0028-C: RNCC: 2 | RNVC: 2
5120-0028ITEMC: RNCC: 5 | RNVC: 9
5120-028ITEMC: RNCC: 5 | RNVC: 9
TL5120-0028ITEMC: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-384-4806
Mec Pressure Piece

123844806
F6557956: RNCC: 3 | RNVC: 2

28 Feb 2011

5120-12-327-0953
Spanner Wrench

123270953
SZ2521.000: RNCC: 3 | RNVC: 2
4028177026117: RNCC: 5 | RNVC: 2
SZ2521000: RNCC: 5 | RNVC: 2
SZ 2521: RNCC: 5 | RNVC: 9

29 Nov 1991

5120-12-150-9815
Verriegelungsvorric

121509815
15SK562-0-00: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-334-6170
Pipe Vise

123346170
WRSOM0331: RNCC: 3 | RNVC: 2

30 May 1994

5120-12-702-8935
Socket Wrench

127028935
890-9F620M1-4-10: RNCC: 3 | RNVC: 2

11 Apr 1996

5120-12-384-9329
Hand Tube Flaring Tool

123849329
1.2000: RNCC: 3 | RNVC: 2

12 Apr 2011

5120-12-389-4182
Cross Tip Screwdriver Set

123894182
668010-7: RNCC: 3 | RNVC: 2

3 Jul 2012

5120-12-349-3428
Schluessel

123493428
3420000102: RNCC: 3 | RNVC: 2

28 Oct 1999

5120-12-143-3038
Schluessel

121433038
RELWZ42A: RNCC: 3 | RNVC: 2
RELWZ42A: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-171-9947
Socket Wrench Socket

121719947
6300M3: RNCC: 3 | RNVC: 2
108757: RNCC: 5 | RNVC: 2
6300M3: RNCC: 5 | RNVC: 2

8 Dec 1977

5120-12-368-8172
Socket Wrench Screwdriver Attachment

123688172
3200-IS1,6X10: RNCC: 3 | RNVC: 2
00.50.09.62: RNCC: 5 | RNVC: 2

25 Apr 2006

5120-12-384-1619
Hand Hammer

123841619
530-40: RNCC: 3 | RNVC: 2

27 Jan 2011

5120-12-306-7101
Torque Wrench

123067101
315.9824: RNCC: 3 | RNVC: 2
3159824: RNCC: 5 | RNVC: 2
71-60-061-010: RNCC: 5 | RNVC: 2
71-60-061-010: RNCC: 5 | RNVC: 2
3190767: RNCC: 5 | RNVC: 2
C79123-Z402-A1: RNCC: 5 | RNVC: 2

21 Mar 1986

5120-12-171-0617
Spanner Wrench

121710617
1223-2150.004W1: RNCC: 3 | RNVC: 2
1223-2150-004W1: RNCC: 5 | RNVC: 9
1223-2150.004W1: RNCC: 5 | RNVC: 9

5 Sep 1977

5120-12-168-5616
Socket Wrench Crowfoot Attachment

121685616
1950M17: RNCC: 3 | RNVC: 2
440-17: RNCC: 3 | RNVC: 2
105578: RNCC: 5 | RNVC: 2
1950M-17: RNCC: 5 | RNVC: 2
1055783: RNCC: 5 | RNVC: 2
85-800-5955: RNCC: 6 | RNVC: 9

22 Mar 1977

5120-12-173-8748
Socket Wrench Crowfoot Attachment

121738748
1950M30: RNCC: 3 | RNVC: 2
440-30: RNCC: 3 | RNVC: 2
1950-M30: RNCC: 5 | RNVC: 2
1055868: RNCC: 5 | RNVC: 2
105586: RNCC: 5 | RNVC: 2
1950M-30: RNCC: 5 | RNVC: 2
848Z-30: RNCC: 5 | RNVC: 2

17 May 1978

5120-12-383-1581
Adjustable Wrench

123831581
SMJ 235-004-101-103: RNCC: 3 | RNVC: 2
SMJ235-004-101-103: RNCC: 5 | RNVC: 2

21 Sep 2010

5120-12-174-9815
Huelse

121749815
4S55049-0000: RNCC: 3 | RNVC: 2

15 Aug 1978

5120-12-387-6679
Mechanical Puller Attachment

123876679
80996060566: RNCC: 3 | RNVC: 2
80.99606-0566: RNCC: 5 | RNVC: 2

23 Jan 2012

5120-12-309-8490
Aligning Punch

123098490
6300009-201200.00: RNCC: 2 | RNVC: 2

11 Mar 1987

5120-12-392-3460
Driftpin

123923460
80996060697: RNCC: 3 | RNVC: 2
80.99606-0697: RNCC: 5 | RNVC: 2

28 May 2013

5120-12-343-7086
Socket Wrench

123437086
4328-15: RNCC: 3 | RNVC: 2
43280015: RNCC: 5 | RNVC: 2

16 Jul 1997

5120-12-005-0024

5120-12-364-2915
Cross Tip Screwdriver

123642915
48301000-TCS: RNCC: 3 | RNVC: 2

8 Sep 2004

5120-12-166-9723
Screwdriver Bit Set And Handle

121669723
0005810317: RNCC: 3 | RNVC: 2
0005810117: RNCC: 5 | RNVC: 2

6 Nov 1976

5120-12-181-8131
Druckstempel

121818131
VW408A: RNCC: 3 | RNVC: 9

17 Dec 1979

5120-12-308-7722
Drive Pin Punch

123087722
DIN6450-D8: RNCC: 2 | RNVC: 2
3646-200: RNCC: 3 | RNVC: 2
1074982: RNCC: 5 | RNVC: 2
D8DIN6450: RNCC: 5 | RNVC: 9
DIN6450 D8: RNCC: 5 | RNVC: 9

14 Nov 1986

5120-12-367-6032
Socket Head Screw Key

123676032
400-050-08: RNCC: 3 | RNVC: 2
230/690/5: RNCC: 5 | RNVC: 2

8 Sep 2005

5120-12-196-7625
C Clamp

121967625
C106-A44-B20: RNCC: 3 | RNVC: 2
C106A44B20: RNCC: 5 | RNVC: 2

15 Aug 1983

5120-12-185-6657
Montierwerk Huelse

121856657
4900059-751799-000-0: RNCC: 3 | RNVC: 2
4900059-751799.000.0: RNCC: 3 | RNVC: 2
751799-000-0: RNCC: 5 | RNVC: 2

23 Oct 1980

5120-12-179-9700
Socket Wrench Socket

121799700
120070: RNCC: 3 | RNVC: 2
80.99603-0096: RNCC: 5 | RNVC: 2
3-117-KHD: RNCC: 5 | RNVC: 2
80996030096: RNCC: 5 | RNVC: 2
120 070: RNCC: 5 | RNVC: 9

14 Aug 1979

5120-12-151-4006
Schluessel

121514006
3-169: RNCC: 3 | RNVC: 2
3-169: RNCC: 5 | RNVC: 9
MC060306-01: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-315-2098
Hand Hydraulic Jack

123152098
TL5120-0090-80: RNCC: 2 | RNVC: 2
27732.0: RNCC: 3 | RNVC: 2
0005837815: RNCC: 5 | RNVC: 2
AD5-217: RNCC: 5 | RNVC: 2

1 Oct 1988

5120-12-340-8988
Socket Wrench Set

123408988
31150001: RNCC: 3 | RNVC: 2

2 Jul 1996

5120-12-368-0022
Schluessel

123680022
2195: RNCC: 3 | RNVC: 2
40008960014101: RNCC: 5 | RNVC: 2

16 Nov 2005

5120-12-386-2347
Hand Beading Tool

123862347
2224.01: RNCC: 3 | RNVC: 2

18 Aug 2011

5120-12-023-1392

5120-12-357-7728
Pliers

123577728
DIN5258-A140: RNCC: 4 | RNVC: 1
710100-140: RNCC: 5 | RNVC: 2
771/140: RNCC: 5 | RNVC: 2
71010-140: RNCC: 5 | RNVC: 2

22 Jul 2002

5120-12-310-6340
Pliers

123106340
410-033 KG: RNCC: 3 | RNVC: 2
16100034: RNCC: 5 | RNVC: 2

10 Jun 1987

5120-12-336-1674
Torque Wrench Adapter

123361674
4900399-411110.08: RNCC: 2 | RNVC: 2
4900399-411110.08: RNCC: 3 | RNVC: 2

3 Nov 1994

5120-12-129-5562
Socket Wrench Socket

121295562
45A-11/32: RNCC: 3 | RNVC: 2
02410022: RNCC: 5 | RNVC: 2
D30-307: RNCC: 5 | RNVC: 9
D30-11-32: RNCC: 5 | RNVC: 9
09750: RNCC: 5 | RNVC: 9
880AZ11-32: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-387-4658
Socket Wrench Screwdriver Attachment

123874658
6165160: RNCC: 3 | RNVC: 2
986KK-8: RNCC: 3 | RNVC: 2
6165160: RNCC: 5 | RNVC: 2
4000896052127: RNCC: 5 | RNVC: 2
4010886616512: RNCC: 5 | RNVC: 2
IN 19 LK 8-140: RNCC: 5 | RNVC: 2
4010886616512: RNCC: 5 | RNVC: 2
IN 19 LK 8-140: RNCC: 5 | RNVC: 2
2 0197-208: RNCC: 5 | RNVC: 2

21 Dec 2011

5120-12-141-1296
Lamp Extractor

121411296
5800416-0130.000: RNCC: 3 | RNVC: 2
3762491000: RNCC: 5 | RNVC: 2
5800416-0130-000: RNCC: 5 | RNVC: 2
5800416-0130-000: RNCC: 5 | RNVC: 2
5800416-0130.000: RNCC: 5 | RNVC: 9
37624 91000: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-126-1689
Mechanical Puller

121261689
55060015: RNCC: 3 | RNVC: 2
5738GRIA: RNCC: 5 | RNVC: 2
8170H1A: RNCC: 5 | RNVC: 2
55060-1A: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-327-7173
Gew Spann- Huelse

123277173
01500677632: RNCC: 3 | RNVC: 2
0150 0677 632: RNCC: 5 | RNVC: 2
0150-0677-632: RNCC: 5 | RNVC: 2

24 Feb 1992

5120-12-147-4342
Screw Thread Insert Tang Breakoff Tool

121474342
01586100000: RNCC: 3 | RNVC: 2
TYP0158.6: RNCC: 5 | RNVC: 2
01585100000: RNCC: 5 | RNVC: 9
01582100000: RNCC: 5 | RNVC: 9
2-110: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-375-6903
Screwdriver Bit

123756903
1802534: RNCC: 3 | RNVC: 2
2141 PZ 0: RNCC: 5 | RNVC: 2
1802534: RNCC: 5 | RNVC: 2
2141 PZ 0: RNCC: 5 | RNVC: 2

24 Jun 2008

5120-12-154-3186
Socket Wrench Socket

121543186
NM293-04: RNCC: 3 | RNVC: 2
586-2580: RNCC: 5 | RNVC: 2
586-2580: RNCC: 5 | RNVC: 2
NM293-04: RNCC: 5 | RNVC: 9
586-2580: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-184-0269
Torque Wrench

121840269
8560-02: RNCC: 3 | RNVC: 2
768227: RNCC: 5 | RNVC: 9
768227: RNCC: 5 | RNVC: 9
8560-02: RNCC: 5 | RNVC: 9

12 Jun 1980

5120-12-182-2093
Socket Wrench Crowfoot Attachment

121822093
540-13: RNCC: 3 | RNVC: 2

21 Jan 1980

5120-12-368-1982
Socket Wrench Socket

123681982
01530020-TCS: RNCC: 3 | RNVC: 2

5 Jan 2006

5120-12-368-1977
Wire Twister Pliers

123681977
65751280-TCS: RNCC: 3 | RNVC: 2

5 Jan 2006

5120-12-370-1506
Spanner Wrench

123701506
252648: RNCC: 3 | RNVC: 2
252648: RNCC: 3 | RNVC: 9

26 Sep 2006

5120-12-123-5244

5120-12-312-6788
Face Spanner Wrench Socket

123126788
123 589 05 09 00: RNCC: 3 | RNVC: 2
123589050900: RNCC: 5 | RNVC: 2

27 Jan 1988

5120-12-327-9113
Socket Wrench Extension

123279113
TMXW60: RNCC: 3 | RNVC: 2

19 Mar 1992

5120-12-094-0216

5120-12-022-0341

5120-12-324-2582
Hand Terminal Crimping Tool

123242582
K35: RNCC: 3 | RNVC: 2

31 Jan 1991

5120-12-384-5757
Fuel Injection Nozzle Extractor

123845757
F6790629: RNCC: 3 | RNVC: 2

9 Mar 2011

5120-12-146-7580
K Aufdrueck- Huelse

121467580
02068: RNCC: 3 | RNVC: 2
25704-360470.03.0: RNCC: 3 | RNVC: 2
25704-360470-03-0: RNCC: 5 | RNVC: 2
02068: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-170-2534
Screw Extractor Set

121702534
01491000500: RNCC: 3 | RNVC: 2
8551-55: RNCC: 3 | RNVC: 9
54474: RNCC: 5 | RNVC: 2
840-1-5: RNCC: 5 | RNVC: 9

5 Jul 1977

5120-12-300-3514
Hydraulic Jack Handle

123003514
9844297: RNCC: 3 | RNVC: 2
392-990113-000: RNCC: 5 | RNVC: 2
392-990113.000: RNCC: 5 | RNVC: 2
9844297: RNCC: 5 | RNVC: 9

26 Jul 1984

5120-12-132-1664
Socket Wrench

121321664
25-19: RNCC: 3 | RNVC: 2
25-19: RNCC: 5 | RNVC: 9
91A-19-CR: RNCC: 5 | RNVC: 9
075055: RNCC: 5 | RNVC: 9
75-19: RNCC: 5 | RNVC: 9
211575: RNCC: 5 | RNVC: 9
1834760: RNCC: 5 | RNVC: 9
25-19: RNCC: 5 | RNVC: 9
28M-19: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-371-5180
L Einstellwerkzeug

123715180
71007523: RNCC: 3 | RNVC: 2

12 Apr 2007

5120-12-381-7059
Pull And Press Tool

123817059
901C990036.000.0: RNCC: 2 | RNVC: 2
901C990036.000.0: RNCC: 3 | RNVC: 2

19 Mar 2010

5120-12-327-9111
Socket Wrench Socket

123279111
A6710DZ-3/8: RNCC: 3 | RNVC: 2
402A-3/8: RNCC: 3 | RNVC: 2
175765: RNCC: 5 | RNVC: 2
01540024: RNCC: 5 | RNVC: 2

19 Mar 1992

5120-12-367-1977
Socket Wrench Socket

123671977
DIN3124-S9X10L: RNCC: 2 | RNVC: 2
0713122109: RNCC: 3 | RNVC: 2

19 Jul 2005

5120-12-182-5089
Spanner Wrench

121825089
S51646-0000: RNCC: 3 | RNVC: 2

8 Feb 1980

5120-12-388-5964
Socket Wrench Screwdriver Attachment

123885964
8801-9: RNCC: 3 | RNVC: 2
4000896039432: RNCC: 5 | RNVC: 2

3 Apr 2012

5120-12-388-0317
Crimping Tool Die

123880317
1181-1903: RNCC: 3 | RNVC: 2
80.99625-0091: RNCC: 5 | RNVC: 2
80996250091: RNCC: 5 | RNVC: 2

17 Feb 2012

5120-12-335-3155
Drive Pin Punch

123353155
0852 4111: RNCC: 3 | RNVC: 2
8524111: RNCC: 5 | RNVC: 2

9 Aug 1994

5120-12-385-3181
Ratchet Wrench

123853181
53.000.080: RNCC: 3 | RNVC: 2
51.000.091: RNCC: 3 | RNVC: 2
51.000.091: RNCC: 5 | RNVC: 2
53.000.080: RNCC: 5 | RNVC: 2

23 May 2011

5120-12-164-7523
Socket Wrench Crowfoot Attachment

121647523
30671: RNCC: 3 | RNVC: 2
AN8508-32A2: RNCC: 3 | RNVC: 2
131502: RNCC: 5 | RNVC: 9
1950M50: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-311-7321
Drive Pin Punch

123117321
108-200X10: RNCC: 3 | RNVC: 2
748C-10*: RNCC: 3 | RNVC: 2
714 63 31: RNCC: 5 | RNVC: 2
029969: RNCC: 5 | RNVC: 2
70070011: RNCC: 5 | RNVC: 2
4922980011: RNCC: 5 | RNVC: 9
748C-10: RNCC: 5 | RNVC: 9
748C-10+: RNCC: 5 | RNVC: 9

12 Oct 1987

5120-12-196-7284
Halte- Klammer

121967284
0002520729: RNCC: 3 | RNVC: 2
1820107000: RNCC: 3 | RNVC: 2

8 Aug 1983

5120-12-150-9589

5120-12-137-7874
Open End Wrench

121377874
H89999-D55: RNCC: 3 | RNVC: 2
H89999D55: RNCC: 3 | RNVC: 2
FGWERS164-50: RNCC: 3 | RNVC: 2
10580: RNCC: 5 | RNVC: 2
20580: RNCC: 5 | RNVC: 9
H89999-D55: RNCC: 5 | RNVC: 9
H89999D55: RNCC: 5 | RNVC: 9
10580: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-150-5712
Abziehvorrichtung

121505712
838589023300: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-358-8659
Seal Inserter

123588659
F30274244: RNCC: 3 | RNVC: 2

22 Nov 2002

5120-12-156-1548
Pliers

121561548
NM480: RNCC: 3 | RNVC: 2
NM480: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-702-8640
Socket Wrench Handle Bar

127028640
25-08301070564: RNCC: 3 | RNVC: 2

8 Jan 1996

5120-12-388-0551
Crimping Tool Die

123880551
1185-19101: RNCC: 3 | RNVC: 2
80.99625-0104: RNCC: 5 | RNVC: 2
80996250104: RNCC: 5 | RNVC: 2

22 Feb 2012

5120-12-155-9514
Socket Wrench Socket

121559514
NM291-11: RNCC: 3 | RNVC: 2
NM291-11: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-367-2009
Manual Impact Wrench

123672009
2090/B9: RNCC: 3 | RNVC: 2
73445: RNCC: 5 | RNVC: 2

19 Jul 2005

5120-12-131-6052
Aufs Verlaengerung

121316052
NO PRIMARY REF 12-131-6052: RNCC: 3 | RNVC: 2
1945VERLAENGERUNG: RNCC: 5 | RNVC: 9
1945UV/8000VG: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-386-8654
Spanner Wrench

123868654
0.411.2371: RNCC: 3 | RNVC: 2
0.411.2371: RNCC: 5 | RNVC: 2

10 Oct 2011

5120-12-308-8679
Spanner Wrench

123088679
0044-0100-100631: RNCC: 3 | RNVC: 2
870/000-74: RNCC: 5 | RNVC: 9

24 Nov 1986

5120-12-385-6927
Mounting Sleeve

123856927
1X25 166 856: RNCC: 3 | RNVC: 2

30 Jun 2011

5120-12-388-5491
Socket Wrench Adapter

123885491
001.928: RNCC: 3 | RNVC: 2

29 Mar 2012

5120-12-378-2084
Ma Suction Handle

123782084
BO 602.41: RNCC: 3 | RNVC: 2
704 523: RNCC: 5 | RNVC: 2

19 Mar 2009

5120-12-369-7994
Dreh Haltewerkzeug

123697994
904589036300: RNCC: 3 | RNVC: 2
7083676: RNCC: 5 | RNVC: 2

17 Aug 2006

5120-12-383-6401
Combination Box And Open End Wrench

123836401
0909052: RNCC: 3 | RNVC: 2

17 Nov 2010

5120-12-044-4873

5120-12-091-6224

5120-12-176-0504

5120-12-358-4492
Oelfilt Schluessel

123584492
7145711: RNCC: 3 | RNVC: 2

17 Oct 2002

5120-12-385-3104
Hand Hammer

123853104
53.000.024: RNCC: 3 | RNVC: 2
53.000.024: RNCC: 5 | RNVC: 2

20 May 2011

5120-12-198-6576
Aufweitwer Einsatz

121986576
NO PRIMARY REF 12-198-6576: RNCC: 3 | RNVC: 2
234 204: RNCC: 5 | RNVC: 9

17 Feb 1984

5120-12-308-7330
Cable Type Ratchet Lever Puller

123087330
TL5120-0080: RNCC: 2 | RNVC: 2
TL5180-0279: RNCC: 5 | RNVC: 9
5120-21250: RNCC: 6 | RNVC: 9

11 Nov 1986

5120-12-345-6059
Socket Wrench Socket

123456059
900A-1.1/16: RNCC: 3 | RNVC: 2
043262: RNCC: 5 | RNVC: 2

2 Apr 1998

5120-12-173-8745
Socket Wrench Crowfoot Attachment

121738745
NO PRIMARY REF 12-173-8745: RNCC: 3 | RNVC: 2
131497: RNCC: 5 | RNVC: 9
1950M20: RNCC: 5 | RNVC: 9

17 May 1978

5120-12-161-8101
Kartenzieher

121618101
66.3506.040.05-A001: RNCC: 3 | RNVC: 2
66-3506-040-05: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-154-1011
Grundschlu Einsatz

121541011
CH2266-24NM: RNCC: 3 | RNVC: 2
839589390700: RNCC: 5 | RNVC: 2
CH2266-24NM: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-189-9312
Spanner Wrench

121899312
NO PRIMARY REF 12-189-9312: RNCC: 3 | RNVC: 2
416210: RNCC: 5 | RNVC: 9
416210: RNCC: 5 | RNVC: 9

27 Oct 1981

5120-12-120-4961
Hand Vise

121204961
NO PRIMARY REF 12-120-4961: RNCC: 3 | RNVC: 2
W132-2-12: RNCC: 5 | RNVC: 2
609200-12: RNCC: 5 | RNVC: 2
3248-12: RNCC: 5 | RNVC: 9
576D003-100: RNCC: 5 | RNVC: 9
51018100: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-367-8511
Electronic Equipment Alignment Tool

123678511
270-1,8X15: RNCC: 3 | RNVC: 2
021672: RNCC: 5 | RNVC: 2

24 Oct 2005

5120-12-130-9076
Tube Fitting Wrenching Socket

121309076
NO PRIMARY REF 12-130-9076: RNCC: 3 | RNVC: 2
7411Z3-8IN: RNCC: 5 | RNVC: 9
7411Z3-8: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-330-8890
Torque Wrench

123308890
4507-14: RNCC: 3 | RNVC: 2
09425: RNCC: 5 | RNVC: 2
480/7345-14-00-00/2: RNCC: 5 | RNVC: 9

19 Feb 1993

5120-12-123-5185
Open End Wrench

121235185
894-3-4: RNCC: 3 | RNVC: 2
228273: RNCC: 5 | RNVC: 9
610-3-4: RNCC: 5 | RNVC: 9
610A24: RNCC: 5 | RNVC: 9
610-3-4: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-370-2065
Torque Wrench

123702065
22544820: RNCC: 3 | RNVC: 2
74 Z-0-0-77: RNCC: 5 | RNVC: 2

2 Oct 2006

5120-12-394-5454
Sealant Dispenser

123945454
DW 100: RNCC: 3 | RNVC: 2

11 Dec 2013

5120-12-369-7194
Combination Box And Open End Wrench Set

123697194
205S16M: RNCC: 3 | RNVC: 2
00.31.07.03: RNCC: 5 | RNVC: 2

11 Aug 2006

5120-12-365-5296
Socket Head Screw Key

123655296
T49017 1030: RNCC: 3 | RNVC: 2

12 Jan 2005

5120-12-358-7505
Mechanical Puller Attachment

123587505
16-22: RNCC: 3 | RNVC: 2

11 Nov 2002

5120-12-335-9400
Mechanical Puller

123359400
0852 3007: RNCC: 3 | RNVC: 2
8523007: RNCC: 5 | RNVC: 2

4 Oct 1994

5120-12-193-3327
Blindni Mundstueck

121933327
349588: RNCC: 3 | RNVC: 2

12 Jul 1982

5120-12-369-7024
Box Wrench Set

123697024
120S8M: RNCC: 3 | RNVC: 2
05T008533028: RNCC: 5 | RNVC: 2
00.27.76.80: RNCC: 5 | RNVC: 2

9 Aug 2006

5120-12-027-0708

5120-12-121-1091
Flat Tip Screwdriver

121211091
2460A-3X40: RNCC: 3 | RNVC: 9
231.57: RNCC: 5 | RNVC: 2
EN060-21: RNCC: 5 | RNVC: 9
134-1: RNCC: 5 | RNVC: 9
34005: RNCC: 5 | RNVC: 9
4460A3X40: RNCC: 5 | RNVC: 9
GR40X3-5735K: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-198-7941
Pliers

121987941
636 D 401-290MM: RNCC: 3 | RNVC: 9
61 495102: RNCC: 3 | RNVC: 9
4791-290MM: RNCC: 3 | RNVC: 9
6367-290MM: RNCC: 3 | RNVC: 9
636D401-290MM: RNCC: 5 | RNVC: 9
61495102: RNCC: 5 | RNVC: 9

27 Feb 1984

5120-12-360-8017
Drift Punch

123608017
DHS050-0000: RNCC: 3 | RNVC: 2

11 Jul 2003

5120-12-320-7660
Socket Wrench Socket

123207660
0851 6690: RNCC: 3 | RNVC: 2
8516690: RNCC: 5 | RNVC: 2
8516690FE9369-14: RNCC: 5 | RNVC: 2

14 Feb 1990

5120-12-321-9043
Sheet Metalworking Dolly Block

123219043
1920N: RNCC: 3 | RNVC: 2
5141980006: RNCC: 5 | RNVC: 2

9 Jul 1990

5120-12-389-5061
Torque Wrench Adapter

123895061
R819950: RNCC: 3 | RNVC: 2

16 Jul 2012

5120-12-389-2784
Drift Punch

123892784
741589011500: RNCC: 3 | RNVC: 2
741589011500: RNCC: 5 | RNVC: 2

15 Jun 2012

5120-12-181-7405
Montier- Dorn

121817405
3551989: RNCC: 3 | RNVC: 2

14 Dec 1979

5120-12-183-9071
Hand Intrenching Tool

121839071
W724: RNCC: 2 | RNVC: 9
510022AND510075: RNCC: 5 | RNVC: 9
5120-00410: RNCC: 6 | RNVC: 9

29 May 1980

5120-12-139-3063
Mechanical Puller

121393063
8205891233: RNCC: 3 | RNVC: 2
006M00100: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-301-7881
Schluessel

123017881
839589350700: RNCC: 3 | RNVC: 2
CH1776/7: RNCC: 5 | RNVC: 2
CH1776/7: RNCC: 5 | RNVC: 9

9 Nov 1984

5120-12-348-6328
Flat Tip Screwdriver

123486328
147-3,5: RNCC: 3 | RNVC: 2

28 Jul 1999

5120-12-197-7718
Mechanical Puller

121977718
01TC31093: RNCC: 3 | RNVC: 2

22 Nov 1983

5120-12-342-5166
Torque Wrench

123425166
01TC33079: RNCC: 3 | RNVC: 2

21 Feb 1997

5120-12-092-2261

5120-12-162-1030
Auszieher

121621030
41730: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-367-0187
Face Spanner Wrench Socket

123670187
SW4050T102: RNCC: 3 | RNVC: 2
SW4015T102: RNCC: 5 | RNVC: 9

29 Jun 2005

5120-12-139-3137

5120-12-197-7556
Mechanical Puller Attachment

121977556
000589453400: RNCC: 3 | RNVC: 2
SUPER ROLLEX331305: RNCC: 3 | RNVC: 2
000 589 45 34 00: RNCC: 5 | RNVC: 2
SUPER ROLLEX522380: RNCC: 5 | RNVC: 2

21 Nov 1983

5120-12-186-7290
Mechanical Puller

121867290
99366616: RNCC: 3 | RNVC: 2
430011: RNCC: 5 | RNVC: 9
430011: RNCC: 5 | RNVC: 9

2 Feb 1981

5120-12-318-7382
Inserted Hammer Face

123187382
3625NL35: RNCC: 3 | RNVC: 9

11 Aug 1989

5120-12-382-1922
Socket Head Screw Key

123821922
0250025C: RNCC: 3 | RNVC: 2

20 May 2010

5120-12-367-9273
Cross Tip Screwdriver

123679273
537239-8582.000: RNCC: 3 | RNVC: 2

7 Nov 2005

5120-12-347-2763
Retaining Ring Pliers Set

123472763
9938: RNCC: 3 | RNVC: 2

19 Nov 1998

5120-12-346-9893
Tire Iron

123469893
625900-400: RNCC: 3 | RNVC: 2
752-400: RNCC: 3 | RNVC: 2
7520003: RNCC: 5 | RNVC: 2
62590-400: RNCC: 5 | RNVC: 9

8 Oct 1998

5120-12-312-2117
W Spannvorrichtung

123122117
3002791: RNCC: 2 | RNVC: 2
3002791: RNCC: 3 | RNVC: 2
3002791: RNCC: 5 | RNVC: 9
TK-BA35-4210-526-090: RNCC: 5 | RNVC: 9
TK-BA35-5120-141: RNCC: 5 | RNVC: 9
TK-E59C-4210-010-090: RNCC: 5 | RNVC: 9
3 002 791: RNCC: 5 | RNVC: 9
TK4210-010-090: RNCC: 5 | RNVC: 9

4 Dec 1987

5120-12-146-7540
Erdn Ausziehkralle

121467540
2053LIG22: RNCC: 3 | RNVC: 2
65-7723-827-00: RNCC: 5 | RNVC: 2
LM-4807: RNCC: 5 | RNVC: 9
2053: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-384-3649
Bearing And Bushing Inserter And Remover

123843649
5805891199/00: RNCC: 3 | RNVC: 2

17 Feb 2011

5120-12-132-2317
Pin Vise

121322317
576D203-120: RNCC: 3 | RNVC: 2
310110: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-175-1037
Gewindebuchse

121751037
VG95211-ML-121751037: RNCC: 2 | RNVC: 2
1X56 131 402-12: RNCC: 3 | RNVC: 2
1X56131402-12: RNCC: 5 | RNVC: 9

23 Aug 1978

5120-12-196-6971
Spanner Wrench

121966971
4900059-723110.000.0: RNCC: 2 | RNVC: 2
4900059-723110.000.0: RNCC: 3 | RNVC: 2
4900059-723110.000.0: RNCC: 5 | RNVC: 2
4900059-723110-000-0: RNCC: 5 | RNVC: 2

3 Aug 1983

5120-12-342-8936
Face Spanner Wrench Socket

123428936
E.33.082.40-6467: RNCC: 3 | RNVC: 2

14 Apr 1997

5120-12-348-6470
Torque Wrench

123486470
8461-01: RNCC: 3 | RNVC: 2

29 Jul 1999

5120-12-164-8973

5120-12-333-4788
Mast Einsetzer

123334788
9108510067: RNCC: 3 | RNVC: 2

22 Dec 1993

5120-12-369-0947
Schluesseleinsatz

123690947
6530986: RNCC: 3 | RNVC: 2

22 May 2006

5120-12-300-1502
Mechanical Puller Attachment

123001502
13-36-38-50-3-4: RNCC: 3 | RNVC: 2

7 Jul 1984

5120-12-130-7400
Screwdriver Bit

121307400
VG95211-ML-121307400: RNCC: 2 | RNVC: 2
5010190: RNCC: 3 | RNVC: 2
800/9-7-1X6: RNCC: 5 | RNVC: 2
52871260: RNCC: 5 | RNVC: 2
67090-7X6: RNCC: 5 | RNVC: 2
820H7-6: RNCC: 5 | RNVC: 2
7090-7-1,0X6,0: RNCC: 5 | RNVC: 2
67410: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-334-3945
Retaining Ring Pliers

123343945
GREIFER DIN6799-GRA6: RNCC: 3 | RNVC: 2

3 May 1994

5120-12-367-7420
Drive Pin Punch

123677420
VW 3070/9: RNCC: 3 | RNVC: 2

5 Oct 2005

5120-12-157-3288
Socket Head Screw Key

121573288
51652-4: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-193-4149
Mechanical Puller

121934149
615589013300: RNCC: 3 | RNVC: 2
615 589 01 33 00: RNCC: 3 | RNVC: 2

20 Jul 1982

5120-12-362-4432
Socket Wrench Set

123624432
T4826DS-T: RNCC: 3 | RNVC: 2

25 Feb 2004

5120-12-022-8065

5120-12-094-1303

5120-12-363-8415
Bearing And Bushing Inserter

123638415
T671P5001203: RNCC: 3 | RNVC: 2

30 Jul 2004

5120-12-390-0075
Drive Pin Punch Set

123900075
6635.70: RNCC: 3 | RNVC: 2
6635700000: RNCC: 5 | RNVC: 2

24 Sep 2012

5120-12-315-1830
Bearing And Bushing Inserter

123151830
0852 8775: RNCC: 3 | RNVC: 2
8528775: RNCC: 5 | RNVC: 2
MAGERD 1135: RNCC: 5 | RNVC: 9

28 Sep 1988

5120-12-362-4810
Cross Tip Screwdriver

123624810
54.0084.960.30: RNCC: 3 | RNVC: 2
8078-1: RNCC: 5 | RNVC: 2

2 Mar 2004

5120-12-380-2827
Screwdriver Bit

123802827
00583: RNCC: 3 | RNVC: 2
269-1,5-1,5: RNCC: 5 | RNVC: 2

15 Oct 2009

5120-12-163-8273
Mechanical Puller Attachment

121638273
20014: RNCC: 3 | RNVC: 2
80.99628-0005: RNCC: 5 | RNVC: 2
80996280005: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-194-0260
Pliers

121940260
DIN5235-D-GERAUHT: RNCC: 2 | RNVC: 2
DDIN5235: RNCC: 5 | RNVC: 2

23 Sep 1982

5120-12-123-5796
Socket Wrench Socket

121235796
NO PRIMARY REF 12-123-5796: RNCC: 3 | RNVC: 2
TVA5120-2-263-027: RNCC: 5 | RNVC: 1
TVA5120-2-263-027/1.1.73: RNCC: 5 | RNVC: 2
110728: RNCC: 5 | RNVC: 9
180954: RNCC: 5 | RNVC: 9
9500DZ2 15/16: RNCC: 5 | RNVC: 9
9500SZ2 15-16: RNCC: 5 | RNVC: 9
60A2 15-16: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-183-0628
Box Wrench Set

121830628
W689: RNCC: 2 | RNVC: 9
610-12N: RNCC: 3 | RNVC: 9
W34-2-18: RNCC: 5 | RNVC: 9
5120-00046: RNCC: 6 | RNVC: 9

15 Mar 1980

5120-12-339-8868
Socket Wrench Socket

123398868
NO PRIMARY REF 12-339-8868: RNCC: 3 | RNVC: 2
1000A-1.5/16: RNCC: 5 | RNVC: 9
2389120027: RNCC: 5 | RNVC: 9

29 Jan 1996

5120-12-360-3170
Open End Wrench

123603170
GA1227-1: RNCC: 3 | RNVC: 2

8 May 2003

5120-12-341-8522
Box Wrench

123418522
230A-7/16X1/2: RNCC: 3 | RNVC: 2
41612832: RNCC: 5 | RNVC: 2

5 Nov 1996

5120-12-197-2762
C Clamp

121972762
S51661-0000: RNCC: 3 | RNVC: 2

6 Oct 1983

5120-12-171-2141
Winkel

121712141
81668500011: RNCC: 3 | RNVC: 2
81.66850-0011: RNCC: 3 | RNVC: 2

19 Sep 1977

5120-12-159-9976
Spanner Wrench

121599976
0003-0361-000: RNCC: 3 | RNVC: 2
0003-0361-000: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-302-4801
Heber Kolben

123024801
65942.8: RNCC: 3 | RNVC: 2
65942-8: RNCC: 5 | RNVC: 2

4 Jan 1985

5120-12-362-5369
Pry Bar

123625369
2300109-990009.000.0: RNCC: 2 | RNVC: 2
2300109-990009.000.0: RNCC: 3 | RNVC: 2

5 Mar 2004

5120-12-351-9562
Socket Head Screw Key

123519562
ISO2936-2: RNCC: 2 | RNVC: 2
42-2: RNCC: 3 | RNVC: 2
5200.102.080.063: RNCC: 5 | RNVC: 2
6340340: RNCC: 5 | RNVC: 2
TA509: RNCC: 5 | RNVC: 2

20 Sep 2000

5120-12-301-5979
Socket Head Screw Key

123015979
NO PRIMARY REF 12-301-5979: RNCC: 3 | RNVC: 2
1997MBL-6: RNCC: 5 | RNVC: 9

25 Oct 1984

5120-12-186-2061
Socket Wrench Handle Bar

121862061
4900196-00000-01-0: RNCC: 3 | RNVC: 2

6 Dec 1980

5120-12-369-0137
Torque Wrench

123690137
4550-10: RNCC: 3 | RNVC: 2
7601530: RNCC: 5 | RNVC: 2

12 May 2006

5120-12-318-5002
Cross Tip Screwdriver

123185002
06305: RNCC: 3 | RNVC: 9

20 Jul 1989

5120-12-364-9914
Craftsman's Tweezers

123649914
5-121-1: RNCC: 3 | RNVC: 2

20 Nov 2004

5120-12-359-9458
Hand Rivet Set

123599458
1000042-195400.06: RNCC: 3 | RNVC: 2

24 Mar 2003

5120-12-365-9726
Socket Wrench Socket

123659726
02410040-TCS: RNCC: 3 | RNVC: 2

23 Feb 2005

5120-12-123-5345

5120-12-133-3213
Crimping Tool Die

121333213
05121: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-168-5614
Socket Wrench Crowfoot Attachment

121685614
1950M10: RNCC: 3 | RNVC: 2
1055738: RNCC: 5 | RNVC: 2
1950M-10: RNCC: 5 | RNVC: 2
105573: RNCC: 5 | RNVC: 2
85-800-5949: RNCC: 6 | RNVC: 9

22 Mar 1977

5120-12-130-2263
Crimping Tool Die

121302263
Z2-81-43: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-185-5518
Hole Sheet Metal Holder

121855518
2071Z-40: RNCC: 3 | RNVC: 2
228-2071Z-40: RNCC: 5 | RNVC: 2
2071Z40: RNCC: 5 | RNVC: 2

14 Oct 1980

5120-12-164-8073
Offset Screwdriver

121648073
NO PRIMARY REF 12-164-8073: RNCC: 3 | RNVC: 2
106077: RNCC: 5 | RNVC: 9
2049-6: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-312-1525
Bearing And Bushing Inserter

123121525
142620: RNCC: 3 | RNVC: 2
80.99606-0275: RNCC: 5 | RNVC: 2
80996060275: RNCC: 5 | RNVC: 2
E7325-00-00: RNCC: 5 | RNVC: 2
3-112-KHD: RNCC: 5 | RNVC: 2

27 Nov 1987

5120-12-172-1391
Ro Reinigungsgeraet

121721391
265-5-16: RNCC: 3 | RNVC: 9

22 Dec 1977

5120-12-178-4623
Einbauwerkzeug

121784623
CIT0: RNCC: 3 | RNVC: 2

26 Apr 1979

5120-12-342-2576
Retaining Ring Pliers

123422576
5870900024: RNCC: 3 | RNVC: 2

13 Jan 1997

5120-12-358-1676
Seal Inserter

123581676
80996350009: RNCC: 3 | RNVC: 2

23 Sep 2002

5120-12-371-0732
Socket Wrench Socket

123710732
2300123-970700.000.0: RNCC: 2 | RNVC: 2
2300123-970700.000.0: RNCC: 3 | RNVC: 2
568459: RNCC: 5 | RNVC: 2

6 Feb 2007

5120-12-129-3317
Open End Wrench

121293317
6-11-16X13-16W: RNCC: 3 | RNVC: 2
039739: RNCC: 3 | RNVC: 2
450W11-16X13-16: RNCC: 5 | RNVC: 9
6-11-16X13-16: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-187-5016
Combination Box And Open End Wrench

121875016
111A.F.1 3/16: RNCC: 3 | RNVC: 2
111-1-3-16: RNCC: 5 | RNVC: 9
111A.F.1 3/16: RNCC: 5 | RNVC: 9

10 Apr 1981

5120-12-189-4550
Werkzeug Halter

121894550
3.9314-6010.2: RNCC: 3 | RNVC: 2
7083616: RNCC: 5 | RNVC: 2
000589004000: RNCC: 5 | RNVC: 2
3931460102: RNCC: 5 | RNVC: 9

28 Sep 1981

5120-12-316-3065
Socket Head Screw Key

123163065
42901605: RNCC: 3 | RNVC: 2
LN-5MMBP: RNCC: 5 | RNVC: 2

9 Jan 1989

5120-12-369-0343
Box Wrench

123690343
TL5120-0078-115: RNCC: 2 | RNVC: 2
DIN837-B18X21: RNCC: 5 | RNVC: 1

16 May 2006

5120-12-376-2167
Swivel Knob Jeweler's Screwdriver

123762167
05118096001: RNCC: 3 | RNVC: 2
2052-3,0: RNCC: 5 | RNVC: 2

26 Aug 2008

5120-12-325-9027
Combination Box And Open End Wrench

123259027
2060150: RNCC: 3 | RNVC: 2

22 Jul 1991

5120-12-393-6709
Mechan Mating Part

123936709
A-0261-001-09: RNCC: 3 | RNVC: 2

1 Oct 2013

5120-12-126-3032
Socket Wrench

121263032
4040Z3-8X7-16: RNCC: 3 | RNVC: 2
645A3-8X7-16: RNCC: 5 | RNVC: 2
107842: RNCC: 5 | RNVC: 2
07760: RNCC: 5 | RNVC: 9
1928120001: RNCC: 5 | RNVC: 9
645A-3/8X7/16: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-134-3258
Schluessel

121343258
CH1309-1-11-1: RNCC: 3 | RNVC: 2
2650-574: RNCC: 3 | RNVC: 9
3-415-0-018-020-4: RNCC: 5 | RNVC: 2
26-50-57-4: RNCC: 5 | RNVC: 9
3-415-0-018-020-4: RNCC: 5 | RNVC: 9
26-50-57-4: RNCC: 5 | RNVC: 9
CH1309-1-11-1: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-193-6577
Torque Wrench Adapter

121936577
SOE 13: RNCC: 3 | RNVC: 2
000589240100: RNCC: 5 | RNVC: 2
SOE13: RNCC: 5 | RNVC: 9

18 Aug 1982

5120-12-370-1078
Combination Box And Open End Wrench Set

123701078
96830174: RNCC: 3 | RNVC: 2

21 Sep 2006

5120-12-094-0080

5120-12-092-2250

5120-12-177-0559
Auszieher

121770559
110050: RNCC: 3 | RNVC: 2
89415100: RNCC: 5 | RNVC: 2

9 Jan 1979

5120-12-134-2624
Ausbauvorrichtung

121342624
003M02200: RNCC: 3 | RNVC: 2
080M01000: RNCC: 5 | RNVC: 2
VM55652: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-157-7823
Spanner Wrench

121577823
050106: RNCC: 3 | RNVC: 2
WZ71: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-094-1313

5120-12-092-1762

5120-12-363-9548
Bearing And Bushing Inserter And Remover

123639548
T671P5002110: RNCC: 3 | RNVC: 2

6 Aug 2004

5120-12-389-2303
Installation And Re

123892303
906589046300: RNCC: 3 | RNVC: 2
906589046300: RNCC: 5 | RNVC: 2

11 Jun 2012

5120-12-129-1387

5120-12-331-5297
Torque Wrench

123315297
CH-150-EH UND RS82-EH: RNCC: 3 | RNVC: 2
5120-01640: RNCC: 6 | RNVC: 9

17 May 1993

5120-12-147-4488
Slip Joint Pliers

121474488
DIN5231-A190GERAUHT: RNCC: 2 | RNVC: 2
A190DIN5231: RNCC: 5 | RNVC: 2
A190DIN5231GERAUHT: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-347-9733
Spanner Wrench

123479733
LL-98BA0006: RNCC: 3 | RNVC: 2

18 Mar 1999

5120-12-176-6020
Socket Wrench Handle Bar

121766020
84184-3900-03: RNCC: 3 | RNVC: 2
84184-3900-03: RNCC: 5 | RNVC: 9

11 Dec 1978

5120-12-173-1713
Spanner Wrench

121731713
V7001-004-921-5: RNCC: 3 | RNVC: 2
V7001-004-921-5: RNCC: 5 | RNVC: 2

22 Mar 1978

5120-12-158-9749
Electronic Equipment Alignment Tool

121589749
1-918: RNCC: 3 | RNVC: 2
700-18P: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-381-8985
Socket Wrench

123818985
10-00 000.25: RNCC: 3 | RNVC: 2
LLAVE DE BUJIA TF-95: RNCC: 5 | RNVC: 2
I-10-00 000.25: RNCC: 5 | RNVC: 2

15 Apr 2010

5120-12-358-3627
Socket Wrench Handle

123583627
2193-Z94: RNCC: 3 | RNVC: 2

14 Oct 2002

5120-12-363-8715
Bearing And Bushing Inserter And Remover

123638715
T670P5001208: RNCC: 3 | RNVC: 2

31 Jul 2004

5120-12-142-1492
Socket Wrench

121421492
0976004100: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-368-8198
Socket Wrench Screwdriver Attachment

123688198
3220-PH3: RNCC: 3 | RNVC: 2
00.50.15.68: RNCC: 5 | RNVC: 2

25 Apr 2006

5120-12-149-6891

5120-12-091-7728

5120-12-359-9646
Open End Wrench

123599646
203318: RNCC: 3 | RNVC: 2

25 Mar 2003

5120-12-369-5300
Mechanical Puller

123695300
KL-160-3: RNCC: 3 | RNVC: 2
0900087: RNCC: 5 | RNVC: 2

18 Jul 2006

5120-12-173-1839
Torque Wrench Adapter

121731839
NO PRIMARY REF 12-173-1839: RNCC: 3 | RNVC: 2
58123636: RNCC: 5 | RNVC: 9
752-36-36: RNCC: 5 | RNVC: 9

22 Mar 1978

5120-12-318-4445
Spanner Wrench

123184445
8431971: RNCC: 3 | RNVC: 2
3-8220-092: RNCC: 5 | RNVC: 2
8220092: RNCC: 5 | RNVC: 2

14 Jul 1989

5120-12-386-5594
Bearing And Bushing Inserter

123865594
F6787793: RNCC: 3 | RNVC: 2

12 Sep 2011

5120-12-354-7510
Eindrueckwerkzeug

123547510
1X54 138 725: RNCC: 3 | RNVC: 2

22 Aug 2001

5120-12-364-6769
Drive Pin Punch

123646769
70090007-TCS: RNCC: 3 | RNVC: 2

20 Oct 2004

5120-12-371-5509
Mechanical Puller Attachment

123715509
5175934: RNCC: 3 | RNVC: 2
541149: RNCC: 5 | RNVC: 2

17 Apr 2007

5120-12-365-9735
Box Wrench

123659735
41051213-TCS: RNCC: 3 | RNVC: 2

23 Feb 2005

5120-12-170-4736
Auszieher

121704736
99346204: RNCC: 3 | RNVC: 2
110030: RNCC: 3 | RNVC: 2
8409166: RNCC: 5 | RNVC: 2
141310: RNCC: 5 | RNVC: 2
89415098: RNCC: 5 | RNVC: 2
698-729-0000: RNCC: 5 | RNVC: 2
8207119: RNCC: 5 | RNVC: 2

14 Jul 1977

5120-12-147-6731
Socket Wrench

121476731
895-11-32: RNCC: 3 | RNVC: 2
201-11-32: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-343-7079
Socket Wrench

123437079
4328-7: RNCC: 3 | RNVC: 2
43280007: RNCC: 5 | RNVC: 2

16 Jul 1997

5120-12-175-2469
Socket Wrench Socket

121752469
EV4-851: RNCC: 3 | RNVC: 2
EV4-851: RNCC: 5 | RNVC: 9

4 Sep 1978

5120-12-387-1911
Socket Wrench Socket

123871911
001.766: RNCC: 3 | RNVC: 2

14 Nov 2011

5120-12-023-6059

5120-12-376-7837
Torque Wrench Adapter

123767837
5905890208/00: RNCC: 3 | RNVC: 2
590589020800: RNCC: 5 | RNVC: 2

6 Nov 2008

5120-12-373-5768
Face Spanner Wrench Socket

123735768
0986611751: RNCC: 3 | RNVC: 2

16 Nov 2007

5120-12-169-3188
Halter

121693188
60458100: RNCC: 3 | RNVC: 2

4 May 1977

5120-12-357-6291
Montierdorn

123576291
F6279900: RNCC: 3 | RNVC: 2

8 Jul 2002

5120-12-330-5530
Stud Inserter

123305530
0851 0470: RNCC: 3 | RNVC: 2
8510470: RNCC: 5 | RNVC: 2

8 Jan 1993

5120-12-335-4444
Mechanical Puller

123354444
0852 5000: RNCC: 3 | RNVC: 2
8525000: RNCC: 5 | RNVC: 2

18 Aug 1994

5120-12-384-8066
Hand Hammer

123848066
51.000.025: RNCC: 3 | RNVC: 2
51.000.025: RNCC: 5 | RNVC: 2

30 Mar 2011

5120-12-140-9181
Schluessel

121409181
170010: RNCC: 3 | RNVC: 2
4601A: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-355-9803
Montierdorn

123559803
B410/11-61: RNCC: 3 | RNVC: 2
0000920074: RNCC: 5 | RNVC: 2
0000920074: RNCC: 5 | RNVC: 2

10 Jan 2002

5120-12-172-1837
Spanner Wrench

121721837
903-812-0073: RNCC: 3 | RNVC: 2

3 Jan 1978

5120-12-347-8597
Box Wrench

123478597
610N-16X18: RNCC: 3 | RNVC: 9

24 Feb 1999

5120-12-146-1117
Mechanical Puller

121461117
25704-360340.00.0: RNCC: 2 | RNVC: 2
25704-360340.00.0: RNCC: 3 | RNVC: 2
25704-360340.00.0: RNCC: 5 | RNVC: 2
25704-360340-00-0: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-380-6098
Open End Wrench

123806098
0156106091000: RNCC: 3 | RNVC: 2
156A-1/8X3/16: RNCC: 5 | RNVC: 2

12 Nov 2009

5120-12-312-9939
Open End Wrench

123129939
62903011005: RNCC: 3 | RNVC: 2

24 Feb 1988

5120-12-326-9489
Face Spanner Wrench Socket

123269489
8475766: RNCC: 3 | RNVC: 2

13 Nov 1991

5120-12-319-4531
Lager- Und Einsatz

123194531
99374299: RNCC: 3 | RNVC: 2

3 Oct 1989

5120-12-373-4528
Socket Head Screw Key

123734528
54975: RNCC: 3 | RNVC: 2
0613 140 20: RNCC: 3 | RNVC: 2
4001002549753: RNCC: 5 | RNVC: 2

6 Nov 2007

5120-12-093-7607

5120-12-394-5169
Mounting Punch

123945169
F30377635: RNCC: 3 | RNVC: 2

9 Dec 2013

5120-12-342-2148
Boerdelwer Einsatz

123422148
15429901: RNCC: 3 | RNVC: 2

7 Jan 1997

5120-12-392-7298
Socket Wrench Crowfoot Attachment

123927298
SEWZG011: RNCC: 3 | RNVC: 2

2 Jul 2013

5120-12-373-1459
Combination Box And Open End Wrench

123731459
534-17: RNCC: 3 | RNVC: 2
00.32.27.26: RNCC: 5 | RNVC: 2
6512730: RNCC: 5 | RNVC: 2

2 Oct 2007

5120-12-124-8491
Piston Ring Compressor

121248491
35-10-25: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-355-2874
Socket Wrench Handle

123552874
339-3/8X150: RNCC: 3 | RNVC: 2
01014: RNCC: 5 | RNVC: 2

30 Oct 2001

5120-12-325-1612
Spanner Wrench

123251612
1000173-992300.000.0: RNCC: 2 | RNVC: 2
1000173-992300.000.0: RNCC: 3 | RNVC: 2

10 May 1991

5120-12-151-8414

5120-12-361-2885
Socket Wrench Socket

123612885
983713: RNCC: 3 | RNVC: 2
020615: RNCC: 5 | RNVC: 2

12 Sep 2003

5120-12-193-8392
Mechanical Puller Attachment

121938392
105-31711W1.03: RNCC: 3 | RNVC: 2
105-31711W1-03: RNCC: 5 | RNVC: 2

6 Sep 1982

5120-12-186-7867
Hand Hammer

121867867
NO PRIMARY REF 12-186-7867: RNCC: 3 | RNVC: 2
3534: RNCC: 5 | RNVC: 9

4 Feb 1981

5120-12-150-5190
Open End Box Wrench

121505190
CH279-3: RNCC: 3 | RNVC: 2
3.418.0.018.021.4: RNCC: 5 | RNVC: 2
1206 1268: RNCC: 5 | RNVC: 2
12061268: RNCC: 5 | RNVC: 2
CH279-3: RNCC: 5 | RNVC: 9
3-418-0-018-021-4: RNCC: 5 | RNVC: 9
30-9012-01: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-126-3034
Socket Wrench

121263034
NO PRIMARY REF 12-126-3034: RNCC: 3 | RNVC: 2
645A5-8X3-4: RNCC: 5 | RNVC: 2
107844: RNCC: 5 | RNVC: 9
4040Z5-8X3-4: RNCC: 5 | RNVC: 9
07810: RNCC: 5 | RNVC: 9
1928120004: RNCC: 5 | RNVC: 9
645A-5/8X3/4: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-120-6673
Socket Wrench Socket

121206673
52A25-32: RNCC: 3 | RNVC: 2
50-6-25-32: RNCC: 3 | RNVC: 2
00506332: RNCC: 5 | RNVC: 2
03430041: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-148-2410
Loethilfsvorrichtun

121482410
RWUSK613A: RNCC: 3 | RNVC: 2
5M5790-900-01: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-356-3317
Rohr- Zange

123563317
8330030: RNCC: 3 | RNVC: 2

14 Feb 2002

5120-12-126-4921

5120-12-382-1905
Pipe Wrench

123821905
ES 5600: RNCC: 3 | RNVC: 2
01.57.77.63: RNCC: 5 | RNVC: 2

19 May 2010

5120-12-305-3718
Seal Inserter And Remover

123053718
0852 8779: RNCC: 3 | RNVC: 2
8528779: RNCC: 5 | RNVC: 2

28 Oct 1985

5120-12-191-1888
Aufsatz

121911888
1X56136964: RNCC: 3 | RNVC: 2

18 Jan 1982

5120-12-352-1377
Lage Ausziehersatz

123521377
P-245001-410-27H-009: RNCC: 3 | RNVC: 2
P245001-410-27H-009: RNCC: 5 | RNVC: 2

19 Oct 2000

5120-12-186-7356
Seal Inserter

121867356
99374380: RNCC: 3 | RNVC: 2
416800: RNCC: 5 | RNVC: 9
416800: RNCC: 5 | RNVC: 9

2 Feb 1981

5120-12-196-6961
Spanner Wrench

121966961
4900059-721200.000.0: RNCC: 2 | RNVC: 2
4900059-721200.000.0: RNCC: 3 | RNVC: 2
4900059-721200-000-0: RNCC: 5 | RNVC: 2
4900059-721200.000.0: RNCC: 5 | RNVC: 2

3 Aug 1983

5120-12-382-0860
Flat Tip And Cross Tip Screwdriver Set

123820860
07152: RNCC: 3 | RNVC: 2
302HK6SO: RNCC: 5 | RNVC: 2

6 May 2010

5120-12-336-5867
Montierdorn

123365867
0852 5016: RNCC: 3 | RNVC: 2
8525016: RNCC: 5 | RNVC: 2

28 Nov 1994

5120-12-141-9659
Mechanical Puller Adapter

121419659
Y211-31: RNCC: 3 | RNVC: 2
511: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-161-0092
Seal Inserter

121610092
510306-0000.06: RNCC: 2 | RNVC: 2
07297: RNCC: 3 | RNVC: 2
07297: RNCC: 5 | RNVC: 9
510306-0000-06: RNCC: 5 | RNVC: 9
510306-0000-06: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-388-9356
Mecha Ejector Tool

123889356
80996090031: RNCC: 3 | RNVC: 2
80.99609-0031: RNCC: 5 | RNVC: 2

8 May 2012

5120-12-091-2906

5120-12-184-7714
Einbauwerkzeug

121847714
0851 2151: RNCC: 3 | RNVC: 2
8512151: RNCC: 5 | RNVC: 2

16 Aug 1980

5120-12-364-3138
Socket Wrench Socket

123643138
01240055-TCS: RNCC: 3 | RNVC: 2

9 Sep 2004

5120-12-191-9407
Mechanical Puller

121919407
66632400: RNCC: 3 | RNVC: 2

16 Mar 1982

5120-12-150-3962
Montagevorrichtung

121503962
1X46107333: RNCC: 3 | RNVC: 2
V107333: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-135-5980

5120-12-342-1369
Box Wrench

123421369
NO PRIMARY REF 12-342-1369: RNCC: 3 | RNVC: 2
23A-7/8X15/16: RNCC: 5 | RNVC: 9
41474446: RNCC: 5 | RNVC: 9

17 Dec 1996

5120-12-328-5732
Socket Wrench Socket

123285732
NO PRIMARY REF 12-328-5732: RNCC: 3 | RNVC: 2
169986: RNCC: 5 | RNVC: 9
7800DM-VDE-8: RNCC: 5 | RNVC: 9

4 Jun 1992

5120-12-313-8301
Socket Head Screw Key Set

123138301
T440/11: RNCC: 3 | RNVC: 2
1292340KM: RNCC: 3 | RNVC: 2
4400019: RNCC: 5 | RNVC: 2

10 May 1988

5120-12-146-3724
Dorn

121463724
1X56045798: RNCC: 3 | RNVC: 2
83091440051: RNCC: 5 | RNVC: 2
83.09144-0051: RNCC: 5 | RNVC: 2
W45798: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-393-2546
Machinist's Vise

123932546
28602: RNCC: 3 | RNVC: 2
0803820: RNCC: 5 | RNVC: 2

21 Aug 2013

5120-12-368-8143
Pliers

123688143
2420 GC-125 IP: RNCC: 3 | RNVC: 2
00.14.35.77: RNCC: 5 | RNVC: 2
0101962: RNCC: 5 | RNVC: 9

24 Apr 2006

5120-12-127-8976
Schluessel

121278976
21002921000: RNCC: 3 | RNVC: 2
10L4194: RNCC: 5 | RNVC: 9
1002-921: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-123-5941
Socket Wrench Crowfoot Attachment

121235941
440A-11/16: RNCC: 3 | RNVC: 2
1950Z11-16: RNCC: 3 | RNVC: 2
02490038: RNCC: 5 | RNVC: 2
105607: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-361-2268
Aligning Punch

123612268
5500380574: RNCC: 3 | RNVC: 2

5 Sep 2003

5120-12-339-1126
Face Spanner Wrench Socket

123391126
5870 401 097: RNCC: 3 | RNVC: 2
141.5870.401097: RNCC: 5 | RNVC: 2

11 Oct 1995

5120-12-342-6790
Screwdriver Bit

123426790
44KTX-T25: RNCC: 3 | RNVC: 2
01350025: RNCC: 5 | RNVC: 2

13 Mar 1997

5120-12-332-6566
Spanner Wrench

123326566
9108510223: RNCC: 3 | RNVC: 2

2 Sep 1993

5120-12-315-5595
Mechanical Puller

123155595
0851 9644: RNCC: 3 | RNVC: 2

8 Nov 1988

5120-12-331-5886
Torque Wrench

123315886
7043B: RNCC: 3 | RNVC: 9
75020: RNCC: 5 | RNVC: 9

25 May 1993

5120-12-339-3022
Open End Wrench

123393022
0059174: RNCC: 3 | RNVC: 2

7 Nov 1995

5120-12-157-2115
Verriegelungsvorric

121572115
2-4409: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-356-2770
Montierwerk Huelse

123562770
80996010055: RNCC: 3 | RNVC: 2
80.99601-0055: RNCC: 5 | RNVC: 2

7 Feb 2002

5120-12-702-8763
Montage- Hebel

127028763
52-04066110117: RNCC: 3 | RNVC: 2

9 Jan 1996

5120-12-129-5569
Screwdriver Bit

121295569
NO PRIMARY REF 12-129-5569: RNCC: 3 | RNVC: 2
6972L6: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-185-6464
Hand Hammer

121856464
252-23: RNCC: 3 | RNVC: 2
294: RNCC: 5 | RNVC: 9
294: RNCC: 5 | RNVC: 9

21 Oct 1980

5120-12-173-1710
Spanner Wrench

121731710
V7001-004-924-29: RNCC: 3 | RNVC: 2
V7001-004-924-29: RNCC: 5 | RNVC: 2

22 Mar 1978

5120-12-131-5260
Sailmaker's Pricker

121315260
TL5120-0028-B: RNCC: 2 | RNVC: 2
5120-0028ITEMB: RNCC: 5 | RNVC: 9
5120-028ITEMB: RNCC: 5 | RNVC: 9
TL5120-0028ITEMB: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-371-0132
Box Wrench

123710132
7102-0035: RNCC: 3 | RNVC: 2

25 Jan 2007

5120-12-389-3851
Socket Head Screw Key Set

123893851
627410-10: RNCC: 3 | RNVC: 2

29 Jun 2012

5120-12-309-8414
Rohrbieger Dorn

123098414
840529-00.03: RNCC: 3 | RNVC: 2

10 Mar 1987

5120-12-189-5911
Socket Head Screw Key

121895911
4900142-300: RNCC: 2 | RNVC: 2
7835006: RNCC: 3 | RNVC: 2
4900142-300: RNCC: 5 | RNVC: 2
7835-006: RNCC: 5 | RNVC: 2
4900142-300: RNCC: 5 | RNVC: 9

7 Oct 1981

5120-12-381-0628
Spanner Wrench

123810628
354.017-091: RNCC: 3 | RNVC: 2

6 Jan 2010

5120-12-193-1022
Torque Wrench Adapter

121931022
115589110700: RNCC: 3 | RNVC: 2

22 Jun 1982

5120-12-195-0128
Spanner Wrench

121950128
1712169901: RNCC: 3 | RNVC: 2
17121 69901: RNCC: 5 | RNVC: 9

30 Dec 1982

5120-12-361-1433
Hand Terminal Crimping Tool

123611433
018509000: RNCC: 3 | RNVC: 2

27 Aug 2003

5120-12-390-2385
Special Purpose Combination Wrench

123902385
4W833A: RNCC: 3 | RNVC: 2

19 Oct 2012

5120-12-322-4064
Box Wrench

123224064
C25-M16X17: RNCC: 3 | RNVC: 2
148067: RNCC: 5 | RNVC: 2

20 Aug 1990

5120-12-300-1501
Mechanical Puller Attachment

123001501
13-36-37-50-3-4: RNCC: 3 | RNVC: 2

7 Jul 1984

5120-12-178-9638
Hand Abrasive Wheel Dresser

121789638
61964005: RNCC: 3 | RNVC: 9
56800-0: RNCC: 5 | RNVC: 2

28 May 1979

5120-12-328-5731
Socket Wrench Screwdriver Attachment

123285731
A6709LM-3: RNCC: 3 | RNVC: 2
175 234: RNCC: 5 | RNVC: 2
175234: RNCC: 5 | RNVC: 2

4 Jun 1992

5120-12-332-6208
B Einstellwerkzeug

123326208
3255: RNCC: 3 | RNVC: 2

30 Aug 1993

5120-12-338-2608
Bearing And Bushing Inserter

123382608
2.72-34253: RNCC: 3 | RNVC: 2

13 Jun 1995

5120-12-338-6550
Montage- Hebel

123386550
4900059-752170.001.0: RNCC: 3 | RNVC: 2

10 Aug 1995

5120-12-373-9635
Torque Wrench Adapter

123739635
7678910: RNCC: 3 | RNVC: 2
4002805728215: RNCC: 5 | RNVC: 2
7218-21: RNCC: 5 | RNVC: 2
7678910: RNCC: 5 | RNVC: 2
7218-21: RNCC: 5 | RNVC: 2
RIM-21/18: RNCC: 5 | RNVC: 2

2 Jan 2008

5120-12-340-2195
Torque Wrench Adapter

123402195
20/DCA-11/16: RNCC: 3 | RNVC: 2
731A/40-11/16: RNCC: 3 | RNVC: 2
58614038: RNCC: 5 | RNVC: 2

15 Mar 1996

5120-12-352-8871
Socket Wrench Handle

123528871
05003246001: RNCC: 3 | RNVC: 2
98/42: RNCC: 5 | RNVC: 2

2 Jan 2001

5120-12-139-5765

5120-12-338-0075
Gl Montierwerkzeug

123380075
7129131200: RNCC: 3 | RNVC: 2

10 May 1995

5120-12-189-0598
Schluessel

121890598
U10645: RNCC: 3 | RNVC: 2
U10645: RNCC: 5 | RNVC: 9

24 Aug 1981

5120-12-134-2663
Antriebswellenhalte

121342663
014M06400: RNCC: 3 | RNVC: 2
VM70829: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-380-3522
Socket Wrench Socket Set

123803522
4415 34 21: RNCC: 3 | RNVC: 2

22 Oct 2009

5120-12-359-0125
Piston Ring Expander

123590125
036344: RNCC: 3 | RNVC: 2

10 Dec 2002

5120-12-198-2234
Pneumatic Tire Valve Fishing Tool

121982234
23.0600: RNCC: 3 | RNVC: 2
1360A: RNCC: 5 | RNVC: 2

2 Jan 1984

5120-12-387-1840
Caulking Gun

123871840
51.000.069: RNCC: 3 | RNVC: 2
51.000.069: RNCC: 5 | RNVC: 2

14 Nov 2011

5120-12-322-2650
Montierhuelse

123222650
021.451799: RNCC: 3 | RNVC: 2

7 Aug 1990

5120-12-374-7863
Bearing And Bushing Inserter And Remover

123747863
950589023300: RNCC: 3 | RNVC: 2

20 Mar 2008

5120-12-342-1977
Hand Pinzettensatz

123421977
537-287: RNCC: 3 | RNVC: 2

2 Jan 1997

5120-12-350-1786
Pliers

123501786
4.901-062: RNCC: 3 | RNVC: 2

23 Feb 2000

5120-12-304-0840
Spanner Wrench

123040840
009-030.105-005W4: RNCC: 3 | RNVC: 2
12790-110000.005: RNCC: 5 | RNVC: 2
009-039.105-005W4: RNCC: 5 | RNVC: 9

10 Jun 1985

5120-12-321-9044
Hand Hammer

123219044
1949-2: RNCC: 3 | RNVC: 2
5142980012: RNCC: 5 | RNVC: 2

9 Jul 1990

5120-12-197-6237
F Einstellwerkzeug

121976237
PV11643: RNCC: 3 | RNVC: 2
MAGERD 0360: RNCC: 5 | RNVC: 9

8 Nov 1983

5120-12-308-6495
Torque Wrench

123086495
275541: RNCC: 3 | RNVC: 2
275541: RNCC: 3 | RNVC: 9
00275541.4.0: RNCC: 5 | RNVC: 2
00275541.4.0: RNCC: 5 | RNVC: 9

31 Oct 1986

5120-12-153-7939
Schluesselsicherung

121537939
CH1775-5: RNCC: 3 | RNVC: 2
839589330700: RNCC: 5 | RNVC: 2
CH1775-5: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-187-3366
Socket Wrench Socket

121873366
NO PRIMARY REF 12-187-3366: RNCC: 3 | RNVC: 2
900WZ11 16: RNCC: 5 | RNVC: 2
900WZ11-16: RNCC: 5 | RNVC: 2
900WZ11/16: RNCC: 5 | RNVC: 9

30 Mar 1981

5120-12-369-6939
Socket Wrench

123696939
4040M16X18: RNCC: 3 | RNVC: 2
34/16X18: RNCC: 3 | RNVC: 2
29-16X18: RNCC: 3 | RNVC: 2
00.32.01.00: RNCC: 5 | RNVC: 2

9 Aug 2006

5120-12-313-4269
Mechanical Puller Attachment

123134269
3913-04003-000: RNCC: 3 | RNVC: 2
3913.04003.000: RNCC: 5 | RNVC: 2

30 Mar 1988

5120-12-155-9405
Rohr- Zange

121559405
NM167-03: RNCC: 3 | RNVC: 2
NM167-03: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-370-8874
Socket Wrench Socket

123708874
80996060611: RNCC: 3 | RNVC: 2
80.99606-0611: RNCC: 5 | RNVC: 2

12 Jan 2007

5120-12-376-8422
M Indentation Tool

123768422
5905890243/00: RNCC: 3 | RNVC: 2
F30140291: RNCC: 5 | RNVC: 2

12 Nov 2008

5120-12-194-0057
Face Spanner Wrench Socket

121940057
41-1693-990100.000.0: RNCC: 3 | RNVC: 2

22 Sep 1982

5120-12-390-6928
Open End Wrench

123906928
2300109-990330.001.0: RNCC: 2 | RNVC: 2
2300109-990330.001.0: RNCC: 3 | RNVC: 2

4 Dec 2012

5120-12-368-3185
Socket Wrench

123683185
1035652: RNCC: 3 | RNVC: 2

17 Feb 2006

5120-12-134-2664
Socket Wrench

121342664
023M07800: RNCC: 3 | RNVC: 2
VM70936: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-121-6901

5120-12-133-6412
Krafts Gewindedorn

121336412
161-181: RNCC: 3 | RNVC: 2
S552BM3-100: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-171-1949
Ausziehvorrichtung

121711949
80996020017: RNCC: 3 | RNVC: 2
80.99602-0017: RNCC: 5 | RNVC: 9

16 Sep 1977

5120-12-131-2841
Mechanical Puller

121312841
637: RNCC: 3 | RNVC: 2
D5-10-11U637: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-331-9244
Cross Tip Screwdriver

123319244
TS201P-5/16: RNCC: 3 | RNVC: 2
8080-5/16: RNCC: 5 | RNVC: 9
162787: RNCC: 5 | RNVC: 9

7 Jul 1993

5120-12-150-4482
Schluessel

121504482
838589000100: RNCC: 3 | RNVC: 2
8385890001: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-312-3496
Mechanical Puller

123123496
KDLM6798: RNCC: 3 | RNVC: 2
KDLM 6798: RNCC: 5 | RNVC: 2

18 Dec 1987

5120-12-309-6548
Okular Zange

123096548
335927-9002.000: RNCC: 3 | RNVC: 2
33 59 27-9002.000: RNCC: 5 | RNVC: 9
335927-9002.000: RNCC: 5 | RNVC: 9
335927-9002-000: RNCC: 5 | RNVC: 9

13 Feb 1987

5120-12-171-3158
Stempel

121713158
VG95211-ML-121713158: RNCC: 2 | RNVC: 2
105-31781W4.03: RNCC: 3 | RNVC: 2
105-31781W4-03: RNCC: 5 | RNVC: 2

29 Sep 1977

5120-12-385-5213
Plier Wrench

123855213
115.1033: RNCC: 3 | RNVC: 2
391129152300: RNCC: 6 | RNVC: 9

10 Jun 2011

5120-12-124-2711
Richt- Platte

121242711
RM1000X1000X90: RNCC: 3 | RNVC: 2
RM1000X1000: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-190-4581
Socket Wrench Set

121904581
6718M: RNCC: 3 | RNVC: 2
108822: RNCC: 5 | RNVC: 2

26 Nov 1981

5120-12-195-2632
Open End Wrench

121952632
C900-M20X22: RNCC: 3 | RNVC: 2
420 0492: RNCC: 3 | RNVC: 2
4200492: RNCC: 3 | RNVC: 2

31 Jan 1983

5120-12-134-2652
Einstell- Dorn

121342652
016M07800: RNCC: 3 | RNVC: 2
VM74198: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-156-1575
Socket Wrench Socket

121561575
NM293-19: RNCC: 3 | RNVC: 2
NM293-19: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-147-1092
Spanner Wrench

121471092
6192904: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-343-3843
Montierdorn

123433843
427589074300: RNCC: 3 | RNVC: 2

12 Jun 1997

5120-12-387-1209
Mechanical Puller Adapter

123871209
80996020173: RNCC: 3 | RNVC: 2
80.99602-0173: RNCC: 5 | RNVC: 2

8 Nov 2011

5120-12-320-4610
Mechanical Puller Attachment

123204610
4900059-751580.001.0: RNCC: 3 | RNVC: 2

17 Jan 1990

5120-12-349-4144
Socket Head Screw Key

123494144
2300211-991000.002.0: RNCC: 2 | RNVC: 2
2300211-991000.002.0: RNCC: 3 | RNVC: 2

11 Nov 1999

5120-12-382-7535
Flat Tip Screwdriver

123827535
46601080-TCS: RNCC: 3 | RNVC: 2

4 Aug 2010

5120-12-344-6507
Schluesseleinsatz

123446507
99356006: RNCC: 3 | RNVC: 2

20 Nov 1997

5120-12-356-8259
Lifting Pneumatic Bag

123568259
131 06 000: RNCC: 3 | RNVC: 2
TYP V31: RNCC: 5 | RNVC: 2

9 Apr 2002

5120-12-308-6497
Socket Wrench

123086497
274098: RNCC: 3 | RNVC: 2
274098: RNCC: 3 | RNVC: 9
00274098.3.1: RNCC: 5 | RNVC: 2
00274098.3.1: RNCC: 5 | RNVC: 9

31 Oct 1986

5120-12-385-6936
Mechanical Puller

123856936
1X53 183 111: RNCC: 3 | RNVC: 2

30 Jun 2011

5120-12-384-8303
Drift Punch

123848303
46.000.043: RNCC: 3 | RNVC: 2

1 Apr 2011

5120-12-341-1347
Socket Wrench Crowfoot Attachment

123411347
314850: RNCC: 3 | RNVC: 2
314850: RNCC: 3 | RNVC: 2
0314850: RNCC: 5 | RNVC: 9

31 Jul 1996

5120-12-373-4607
Socket Head Screw Key

123734607
0613 131 06: RNCC: 3 | RNVC: 2

6 Nov 2007

5120-12-312-3495
Mechanical Puller

123123495
KDEP2872: RNCC: 3 | RNVC: 2
KDEP 2872: RNCC: 5 | RNVC: 2

18 Dec 1987

5120-12-184-4685
Wrench Extension Handle

121844685
2300109-970125.000.0: RNCC: 2 | RNVC: 2
2300109-970125-000-0: RNCC: 3 | RNVC: 2
2300109-970125.000.0: RNCC: 3 | RNVC: 2
2300109-970125-000-0: RNCC: 3 | RNVC: 2
2300109-970125-000-0: RNCC: 5 | RNVC: 9
2300109-970125.000.0: RNCC: 5 | RNVC: 9

29 Jul 1980

5120-12-166-2513
Klemmstueck

121662513
23303-266300.00: RNCC: 2 | RNVC: 2
4-19-0189862: RNCC: 3 | RNVC: 2
619-45.10.300-02E: RNCC: 3 | RNVC: 2
23303-266300.00: RNCC: 5 | RNVC: 2
23303-266300.00: RNCC: 5 | RNVC: 2
619-45-10-300-02: RNCC: 5 | RNVC: 9
619-45.10.300-02: RNCC: 5 | RNVC: 9
23303-266300-00: RNCC: 5 | RNVC: 9
23303-266300-00: RNCC: 5 | RNVC: 9

19 Aug 1976

5120-12-124-9203
Socket Wrench

121249203
DIN22417-A-M5: RNCC: 4 | RNVC: 1
13.4.1310POS5: RNCC: 5 | RNVC: 2
DIN22417-M5: RNCC: 5 | RNVC: 9
M5DIN22417: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-120-6563
Hammer Handle

121206563
DIN5112-800-B-ES: RNCC: 2 | RNVC: 2
44-800,ESCHE: RNCC: 3 | RNVC: 2
20-800: RNCC: 5 | RNVC: 9
800X47-4DIN5112: RNCC: 5 | RNVC: 9
800X47-4DIN5112BGEFIRNISZT: RNCC: 5 | RNVC: 9
DIN5112-800X47,4-BGEFIRNISZT: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-135-7155
Stanz- Stempelsatz

121357155
TL5120-0059-3: RNCC: 2 | RNVC: 2
31: RNCC: 3 | RNVC: 2
STPLL22: RNCC: 5 | RNVC: 2
5120-059-4: RNCC: 5 | RNVC: 9
5120-0059-4: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-372-0082
Screw Extractor

123720082
701741: RNCC: 3 | RNVC: 2

11 Jun 2007

5120-12-371-6381
Eindrueckwerkzeug

123716381
906589004300: RNCC: 3 | RNVC: 2

30 Apr 2007

5120-12-373-9172
Fuel Injection Nozzle Extractor

123739172
DBGM 2002 10 759.0 GESCHUETZT: RNCC: 3 | RNVC: 2
80.99601-6022: RNCC: 5 | RNVC: 2
80996016022: RNCC: 5 | RNVC: 2

18 Dec 2007

5120-12-171-2825
Druckstueck

121712825
105-31821W3.01: RNCC: 3 | RNVC: 2
105-31821W3-01: RNCC: 5 | RNVC: 2

26 Sep 1977

5120-12-300-5552
Drive Pin Punch

123005552
AZ0468-11: RNCC: 3 | RNVC: 2
F48906: RNCC: 5 | RNVC: 9

14 Aug 1984

5120-12-189-1077
Socket Wrench Socket

121891077
4011 55: RNCC: 3 | RNVC: 2
5305-55: RNCC: 3 | RNVC: 2
55-55: RNCC: 3 | RNVC: 2
55-SW55: RNCC: 3 | RNVC: 2
8900SM-55: RNCC: 3 | RNVC: 2
1810894: RNCC: 5 | RNVC: 2
000589130900: RNCC: 5 | RNVC: 2

31 Aug 1981

5120-12-141-9661
Mechanical Puller Adapter

121419661
Y213-31: RNCC: 3 | RNVC: 2
513: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-158-4761
Erdnagel Auszieher

121584761
1189698: RNCC: 3 | RNVC: 2
RH13245-41: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-333-7782
Socket Wrench Set

123337782
8189: RNCC: 3 | RNVC: 2
8189: RNCC: 5 | RNVC: 2

4 Feb 1994

5120-12-177-3668
Preszplatte

121773668
55061015: RNCC: 3 | RNVC: 9

29 Jan 1979

5120-12-162-9391

5120-12-333-5741
Bearing And Bushing Inserter

123335741
425589044300: RNCC: 3 | RNVC: 2
7083651: RNCC: 5 | RNVC: 2
425589044300: RNCC: 5 | RNVC: 9

6 Jan 1994

5120-12-135-7852
Aus- Und Einbauhebe

121357852
WA28448: RNCC: 3 | RNVC: 2
2800 1912: RNCC: 5 | RNVC: 2
WA28448: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-175-9324
Spanner Wrench

121759324
R26817: RNCC: 3 | RNVC: 2
R26817: RNCC: 5 | RNVC: 9

30 Oct 1978

5120-12-365-1297
Seal Inserter

123651297
F6378988: RNCC: 3 | RNVC: 2
M55.093.028: RNCC: 5 | RNVC: 2
(241)A4249M55.093.028: RNCC: 8 | RNVC: 2

1 Dec 2004

5120-12-364-5627
Open End Wrench

123645627
40032528-TCS: RNCC: 3 | RNVC: 2

9 Oct 2004

5120-12-129-8046
Aus Und Einbauwerkz

121298046
1805890961: RNCC: 3 | RNVC: 2
1805890961: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-327-7715
Socket Wrench

123277715
25-13: RNCC: 3 | RNVC: 2
618853: RNCC: 5 | RNVC: 2

26 Feb 1992

5120-12-348-6475
Torque Wrench Adapter

123486475
8791-16: RNCC: 3 | RNVC: 2

29 Jul 1999

5120-12-702-9023
Socket Wrench

127029023
4709100-120: RNCC: 3 | RNVC: 2

5 Sep 1996

5120-12-194-4813
Socket Wrench

121944813
P9: RNCC: 3 | RNVC: 2
PS120-P9: RNCC: 5 | RNVC: 2

8 Nov 1982

5120-12-155-8234
Socket Head Screw Key

121558234
21006: RNCC: 3 | RNVC: 2
1340-3,5: RNCC: 3 | RNVC: 2
2100-035: RNCC: 3 | RNVC: 2
1000-3-5: RNCC: 3 | RNVC: 2
1997M-3.5: RNCC: 3 | RNVC: 2
130207: RNCC: 5 | RNVC: 2
12653: RNCC: 5 | RNVC: 2
01340003530: RNCC: 5 | RNVC: 2
57470: RNCC: 5 | RNVC: 2
3933110005: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-147-2998
Spanner Wrench

121472998
1-36-14-003: RNCC: 3 | RNVC: 2
K2793: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-372-2765
Mechanical Puller Attachment

123722765
1-190-S: RNCC: 3 | RNVC: 2

3 Jul 2007

5120-12-381-6467
Mecha Ejector Tool

123816467
117-80168W1: RNCC: 3 | RNVC: 2

12 Mar 2010

5120-12-144-6291
Dr Fuehrungsstange

121446291
2360-264102.00.0: RNCC: 2 | RNVC: 2
2360-264102.00.0: RNCC: 3 | RNVC: 2
2360-264102.00.0: RNCC: 5 | RNVC: 2
2360-264102-00-0: RNCC: 5 | RNVC: 2
2360-264102-00-0: RNCC: 5 | RNVC: 9
2360-264102.00.0: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-303-5691
Spanner Wrench

123035691
DIN6368-16: RNCC: 2 | RNVC: 2
16DIN63 8: RNCC: 5 | RNVC: 9

4 Apr 1985

5120-12-141-6662
Socket Head Screw Key Set

121416662
NO PRIMARY REF 12-141-6662: RNCC: 3 | RNVC: 2
571F002BLSATZ: RNCC: 5 | RNVC: 2
6308LSATZ: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-386-1588
Torque Wrench Adapter

123861588
659925-180: RNCC: 3 | RNVC: 2
08065109027: RNCC: 5 | RNVC: 2
08.06510-9027: RNCC: 5 | RNVC: 2

12 Aug 2011

Load More Results