What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.

What is a Grommet Inserting Punch And Die?

A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Blacksmith's Punch?

A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Tap Extractor?

A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Mechanical Finger?

A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

A Crowbar is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hand Caulking Tool?

A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Screwdriver And Wrench Assembly?

A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Drill Drift?

A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

What is a Fuse Puller?

A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.

What is a Hand Lead Seal Press?

A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.

What is a Hand Beading Tool?

A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.

Hand Tools, Nonedged, Nonpowered - Germany (DE)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by Germany (DE) - NCB is 12

Page 50 of 62

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by Germany

51	20	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - Germany (DE)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 15 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Hand Vise? 31 Items: A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.
What is a Grommet Inserting Punch And Die? 25 Items: A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.
What is a Hand Hydraulic Jack? 111 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 93 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 587 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 13 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
What is a Hand Tube Flaring Tool? 32 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Blacksmith's Punch? 17 Items: A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.
What is a Drain Plug Wrench? 21 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 76 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 14 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 1670 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
What is a Pipe Wrench? 54 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 165 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 55 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
What is a Tap Extractor? 13 Items: A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.
Screwdriver,Offset 77 Items
What is a Screwdriver Bit? 446 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Mechanical Finger? 17 Items: A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.
What is a Socket Wrench Socket? 1303 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 876 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 1273 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 17 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 282 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
What is a Hand Tube Bender? 49 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 669 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 39 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pinch Bar? 17 Items: A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.
What is a Wrecking Bar? 10 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Crowbar? 12 Items: A Crowbar is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 356 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 484 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 37 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 110 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
What is a Hand Caulking Tool? 13 Items: A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.
Face,Hammer,Inserted 54 Items
What is a Hole Sheet Metal Holder? 40 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Screwdriver And Wrench Assembly? 10 Items: A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.
What is a Hand Rivet Set? 62 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Drill Drift? 11 Items: A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.
What is a Socket Wrench Handle Bar? 160 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Stake,Sheet Metalworking 33 Items
Riveter,Blind,Hand 31 Items
What is a Hand Shovel? 24 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 37 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 20 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
Block,Dolly,Sheet Metalworking 33 Items
What is a Piston Ring Compressor? 61 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Fuse Puller? 22 Items: A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.
What is a Hand Lead Seal Press? 12 Items: A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.
What is a Hand Beading Tool? 54 Items: A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.
What is a Hand Hammer? 406 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
Head,Hand Hammer 11 Items
What is a Lamp Extractor? 95 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Carpenters' Pincers? 16 Items: A Carpenters' Pincers (PINCERS,CARPENTERS') is a plierlike hand tool having two opposing jaws which may have hammerlike backs. One handle has a nail or tack pulling claw, the other is shaped to form a screwdriver. The tool may contain a wire cutter. See also NIPPERS, END CUTTING and PINCERS, FARRIERS'.
What is a Farrier's Pincers? 20 Items: A Farrier's Pincers (PINCERS,FARRIER'S) is a plierlike hand tool having two opposing jaws which are designed for removing horseshoes. The handles may have plain or ball ends. See also NIPPERS, END CUTTING and PINCERS, CARPENTERS'.
What is a Hand Pipe And Sewer Auger? 15 Items: A Hand Pipe And Sewer Auger (AUGER,PIPE AND SEWER,HAND) is a flexible spring wire or tape, with a cleaning or boring head at one or both ends. A handle may be provided for turning and pushing. It may also include a metal housing and/or reel in which the tape is coiled. Excludes AUGER, WATER CLOSET, HAND.
What is a Hand Roller? 23 Items: A Hand Roller (ROLLER,HAND) is a hand-held item consisting of a roller on an axle attached to a handle. The width of the roller face (surface) is more than 1/4 inch. See also STITCHER, CEMENTING AND VULCANIZING. Excludes INKING ROLLER, HAND and paint rollers.
What is a Trowel? 36 Items: A Trowel is a tool used for bricklaying, concrete work, plastering, linoleum laying, and masonry work. Excludes CORNER TOOL, CONCRETE.
What is a Hand Abrasive Wheel Dresser? 11 Items: A Hand Abrasive Wheel Dresser (DRESSER,ABRASIVE WHEEL,HAND) is a tool designed to remove glaze from, dress, shape, sharpen, and true solid abrasive wheels. Excludes NIB, DIAMOND, WHEEL DRESSING.
What is a Lamp Cap Extractor? 26 Items: A Lamp Cap Extractor (EXTRACTOR,LAMP CAP) is a tool specifically designed to facilitate the removal of lamp caps from switchboards, panels or indicator lamps.
Replacing Tool,Engine Valve Seat Insert 10 Items
What is a Rivet Bucking Bar? 20 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 154 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 175 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Woven Cable Grip? 30 Items: A Woven Cable Grip (GRIP,CABLE,WOVEN) is a braided wire device designed to clutch a bare or insulated conductor, cable or wire rope, for holding taut or drawing through conduit.
What is a Screw Thread Insert Extractor? 16 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is a Hand Helical Spring Puller Hook? 12 Items: A Hand Helical Spring Puller Hook (HOOK,HELICAL SPRING PULLER,HAND) is a hook whose curved end conforms to Style AP10 of Reference Drawing Group AP.
What is an Electron Tube Extractor? 12 Items: An Electron Tube Extractor (EXTRACTOR,ELECTRON TUBE) is a hand tool designed to facilitate the removal of electron tubes from electronic equipment and to avoid burning the fingers. It may be used for installing tubes.
What is a Cross Tip Screwdriver? 224 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 208 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 61 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 163 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Tool Handle Wedge? 42 Items: A Tool Handle Wedge (WEDGE,TOOL HANDLE) is excludes WEDGE, WOOD.
What is a Valve Tappet Adjusting Tool? 14 Items: A Valve Tappet Adjusting Tool (ADJUSTING TOOL,VALVE TAPPET) is a hand device for adjusting overhead valve tappets of internal combustion engines. It consists of a handle, and at one end a wrench opening or a drive for a replaceable wrench socket, and a knob operated screwdriver tip. The wrench opening (or socket) engages the tappet adjusting screw lock nut and the screwdriver engages the screw.
What is a Hand Powered Poppet Valve Lapper? 16 Items: A Hand Powered Poppet Valve Lapper (LAPPER,POPPET VALVE,HAND POWERED) is a hand tool designed to rotate and/or oscillate poppet type valves in their seats for reseating purposes.
What is a Marlinespike? 11 Items: A Marlinespike is a metal hand tool made in the shape of a tapered pin. One end is pointed and the opposite end may be headed. The body may contain an eye for a lanyard sling, or be grooved lengthwise. Excludes CABLE PICK and FID.
What is an Aligning Punch? 104 Items: An Aligning Punch (PUNCH,ALIGNING) is a round, square, hexagonal or octagonal bodied hand tool, having a round tapered section 6-1/2 inches (165.1 mm) or more in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, DRIFT and DRIFTPIN.
What is a Drift Punch? 39 Items: A Drift Punch (PUNCH,DRIFT) is a round, square, hexagonal, or octagonal bodied hand tool, having a round tapered section 4 to 6 inches (101.6 mm to 152.4 mm) inclusive in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, ALIGNING; and DRIFTPIN.
What is a Socket Wrench Adapter-Extension? 11 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 21 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 149 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Wrench Extension Handle? 36 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Crowfoot Wrench Head Socket? 13 Items: A Crowfoot Wrench Head Socket (SOCKET,CROWFOOT WRENCH HEAD) is a component with an open-wall opening having one end designed to fit into a HEAD, CROWFOOT SOCKET WRENCH and the other end having an internal opening such as hexagonal or 8-point. See also CROWFOOT ATTACHMENT, SOCKET WRENCH.
What is a Socket Wrench Crowfoot Attachment? 267 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 18 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 40 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 35 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 998 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 350 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 102 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 468 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 42 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand-Operated Grommet And Eyelet Press? 14 Items: A Hand-Operated Grommet And Eyelet Press (PRESS,GROMMET AND EYELET,HAND-OPERATED) is a device which punches or pierces holes and in addition fastens or sets eyelets and grommets in cloth, paper and similar material. May be used for fastening or setting rivets, lacing hooks and snaps in cloth, paper and similar material. It is hand operated by lever or screw action. See also PUNCH, EYELET, PLIER TYPE and PRESS, GROMMET AND EYELET, FOOT OPERATED.
What is a Claw Bar? 27 Items: A Claw Bar (BAR,CLAW) is before using, refer to Reference Drawing Group AG.
What is a Pin Vise? 12 Items: A Pin Vise (VISE,PIN) is a clamping device used to hold small items which are usually round. The device consists of a hollow handle having a chuck at one or both ends. The longitudinal axis of the hollow handle is in alignment with that of the chuck(s).
What is a Dapping Punch? 16 Items: A Dapping Punch (PUNCH,DAPPING) is an item consisting of steel bar having one end ball shaped. It is used to form flat metal sheets into a hemispherical shape by working it against a die and striking the opposite end of punch with a hammer.
What is a Tire Iron? 29 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 123 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Machinist's Vise? 64 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Clamp Base Bench Vise? 10 Items: A Clamp Base Bench Vise (VISE,BENCH,CLAMP BASE) is a clamping device consisting of a base, one stationary and one manual screw actuated jaw, and one or more guide bars or rods. Designed with an integral clamp for attaching to a bench, table, or the like. Does not include pipe holding jaws.
What is a Fixed Open End Wrench Set? 61 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Socket Wrench Set? 241 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is a Combination Box And Open End Wrench Set? 48 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Box Wrench Set? 32 Items: A Box Wrench Set (WRENCH SET,BOX) is a group of box wrenches having different characteristics. It may include a HANDLE, EXTENSION WRENCH. See also WRENCH SET, COMBINATION, BOX AND OPEN END.
Spoon,Body And Fender 15 Items
What is a Wrench Kit? 26 Items: A Wrench Kit is an assortment of various types and sizes of wrenches such as SOCKET, SOCKET WRENCH; WRENCH, OPEN END, FIXED; WRENCH, BOX and the like. It may include adapter(s), ratchet(s) and the like. See also WRENCH SET (as modified.
What is a Screw Extractor Set? 14 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 24 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
Jack,Scissors,Hand 17 Items
Pick,Digging 13 Items
What is a Hand Intrenching Tool? 13 Items: A Hand Intrenching Tool (INTRENCHING TOOL,HAND) is a shovel type tool or a pick and shovel combination having standard cutting blade edges or specially designed blade edges for cutting and chopping. It may have a handgrip on the handle. It is designed to be used by individual soldiers primarily for intrenching. Refer to Reference Drawing Group BG for styles.
What is a Piston Ring Expander? 28 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
What is a Joint Breaking Wedge? 12 Items: A Joint Breaking Wedge (WEDGE,JOINT BREAKING) is refer to Reference Drawing Group A before using item name.
Blade,Saddler's Harness Awl 15 Items
Mallet,Rubber 11 Items
What is a Rack Bar Jack? 24 Items: A Rack Bar Jack (JACK,RACK BAR) is excludes JACK, BUMPER and JACK, REEL, HAND.
What is a Hand Tube Flaring Punch? 15 Items: A Hand Tube Flaring Punch (PUNCH,TUBE FLARING,HAND) is a noncutting tool having a shaped end or section designed to flare the ends of tubes. One type is designed to flare the ends of tubes against a tube sheet, and another to flare tube ends to mate with tube fittings. Includes punch components of FLARING TOOL, TUBE, HAND.
What is a Hose Strap Band Clamping Tool? 14 Items: A Hose Strap Band Clamping Tool (CLAMPING TOOL,STRAP BAND,HOSE) is an item designed to tension and lock metal straps around a rubber hose, and the like. It is also used to clamp and hold fittings therein.
What is a Socket Wrench Handle Ratchet Head? 15 Items: A Socket Wrench Handle Ratchet Head (RATCHET HEAD,SOCKET WRENCH HANDLE) is a reversible ratcheting mechanism having a square external end designed to fit into the internal end of a wrench socket or attachment, and has provisions for a round bar grip, but does not include the bar. When furnished with a bar, see HANDLE, SOCKET WRENCH. Excludes RATCHET ATTACHMENT, SOCKET WRENCH.
What is an Etching Needle? 10 Items: An Etching Needle (NEEDLE,ETCHING) is a styluslike tool mounted in a handle. It is used in preparing metal lithographic plates and photo engravings. See also ETCHING POINT.
What is a Mechanical Puller? 1147 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 505 Items
What is a Slip Joint Pliers? 95 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Jewelers' Pliers? 11 Items: A Jewelers' Pliers (PLIERS,JEWELERS') is a tool having jaws designed for use in the assembly and repair of jewelry, watches, and the like. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 112 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 14 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 16 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 35 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 19 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 32 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 73 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Refrigeration Valve Stem Wrench Socket? 10 Items: A Refrigeration Valve Stem Wrench Socket (SOCKET,WRENCH,REFRIGERATION VALVE STEM) is an item having a 1/4 inch (6.3 mm) square external drive on one end, and a square internal opening at the other end. The outside diameter is specially sized to clear openings in refrigeration valve bonnets and covers for reaching recessed stems. It is designed for use with a ratchet wrench for opening and/or closing square stem refrigeration valves.
What is a Drive Pin Punch Set? 27 Items: A Drive Pin Punch Set (PUNCH SET,DRIVE PIN) is a group of PUNCH, DRIVE PIN having different characteristics.
What is a Mechanical Puller Step Plate? 72 Items: A Mechanical Puller Step Plate (STEP PLATE,MECHANICAL PULLER) is a circular disk, flanged to provide a shoulder, and designed to provide a base for the screw point of a PULLER, MECHANICAL when pulling externally mounted bearings, gears, and the like from hollow shafts or housings. It has a concentric, countersunk hole to accommodate the puller screw point.
What is a Solid Center Punch? 26 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Cable Type Ratchet Lever Puller? 34 Items: A Cable Type Ratchet Lever Puller (PULLER,RATCHET LEVER,CABLE TYPE) is an item consisting of a metal frame and ratchet lever reel to which is attached one end of a flexible cable (wire rope). The cable feeds through the fast eye in the metal frame, and may be reeved through a slip hook tackle hook. See also BINDER, LOAD; HOIST, WIRE ROPE and STRETCHER, WIRE.
What is a Hand Yoke Riveter? 13 Items: A Hand Yoke Riveter (RIVETER,YOKE,HAND) is a hand tool designed to install metallic grommets and/or tubular rivets by forcing the unflanged end of the grommet/rivet outward to form another flange which prevents the grommet/rivet from coming out of the item it has been installed in. The tool uses a pliers type pinching action to form the flange. See also PUNCH, EYELET, PLIER TYPE.
What is a Hand Material Handling Hook? 17 Items: A Hand Material Handling Hook (HOOK,MATERIAL HANDLING,HAND) is a hook whose curved end conforms to Style AP1, AP2, AP3 or AP4 of Reference Drawing Group AP. Excludes HOOK, MANHOLE COVER, HAND; HOOK, WIRE BREAKING, HAND; HOOK, ROCK CRUSHER FEEDING, HAND; HOOK, STRAINER REMOVING, HAND and HOOKS, BAG HANDLING, HAND.
What is a Magnetic Retrieving Tool? 22 Items: A Magnetic Retrieving Tool (RETRIEVING TOOL,MAGNETIC) is a hand-operated magnetic device used to locate and pick up metallic articles, such as bolts, nuts, pins, washers, and the like, in confined spaces. It may be rigid, flexible or adjustable. Excludes FINGER, MECHANICAL.
What is a Mechanical Puller Adapter? 68 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Socket Head Screw Socket Wrench Attachment Wrench Set? 10 Items: A Socket Head Screw Socket Wrench Attachment Wrench Set (WRENCH SET,SOCKET HEAD SCREW SOCKET WRENCH ATTACHMENT) is an assortment of various size SOCKET WRENCH ATTACHMENT, SOCKET HEAD SCREW, and HANDLE, SOCKET WRENCH. It may include universal joints, ratcheting adapters and other attachments used therewith.
What is a Mechanical Puller Forcing Screw? 66 Items: A Mechanical Puller Forcing Screw (FORCING SCREW,MECHANICAL PULLER) is a cylindrical, threaded item which may be headed or headless. It may include a threadless portion. All or part of the unthreaded portion(s) must be of a single diameter equal to or smaller than the maximum major diameter of the threaded portion(s). Headless items must have an external or internal wrenching feature or have a provision to facilitate turning. The item must be designed to exert pressure by screwing motion when used with a mechanical puller.
What is a Screw Thread Insert Inserter? 66 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Flat Tip Screwdriver Set? 18 Items: A Flat Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP) is a group of SCREWDRIVER, FLAT TIP having different characteristics.
What is a Terminal Crimping Tool Contact Positioner? 16 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 25 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is a Screw Thread Insert Tang Breakoff Tool? 37 Items: A Screw Thread Insert Tang Breakoff Tool (TANG BREAKOFF TOOL,SCREW THREAD INSERT) is a punch designed to fit within a coiled wire thread insert to manually or mechanically break off the tang by which the insert was threaded into the hole.
What is a Multiposition Vise? 11 Items: A Multiposition Vise (VISE,MULTIPOSITION) is a clamping device consisting of a workholding head and a base provided with swiveling, tilting, and locking arrangement. Designed to be bolt mounted to a bench, table, or the like and constructed so that the workholding head can be swiveled 360 degrees (6.3 radians) in a horizontal plane and tilted from a normal level position downward at least 90 degrees (1.6 radians), and locked in any desired position within the swiveling and tilting ranges. Intended for use in manufacturing and maintenance of mechanical and electronic parts and assemblies or any light bench work. See also VISE, PATTERNMAKER'S.
What is an Adjustable Wrench? 84 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 177 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 40 Items
Handle,Shovel 22 Items
What is a Torque Wrench Set? 13 Items: A Torque Wrench Set (WRENCH SET,TORQUE) is an assortment or two or more torque wrenches or various sizes. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH; and BIT, SCREWDRIVER.
What is a Retaining Ring Installation Tool? 12 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Bearing And Bushing Inserter? 626 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 59 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 466 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 23 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 18 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 80 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 23 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 12 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 12 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Seal Inserter And Remover? 42 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 158 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is an Electrical Contact Inserter And Remover? 21 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Pin Inserter? 28 Items: A Pin Inserter (INSERTER,PIN) is a hand tool designed to facilitate the insertion of a pin into a hole.
What is a Piston Inserter? 39 Items: A Piston Inserter (INSERTER,PISTON) is a tool designed to permit installation of a piston or piston assembly without damaging the packings or piston.
What is a Spring Inserter And Remover? 23 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 11 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Stud Inserter? 20 Items: A Stud Inserter (INSERTER,STUD) is a device designed to drive in studs. It does not have any facilities for removing or extracting studs. See also INSERTER AND REMOVER, STUD.
What is a Stud Inserter And Remover? 13 Items: A Stud Inserter And Remover (INSERTER AND REMOVER,STUD) is a group of items designed to extract and to drive studs. It may include collets, guides, housings, holders and the like. See also REMOVER SET, STUD and INSERTER, STUD.
What is a Gear Inserter? 10 Items: A Gear Inserter (INSERTER,GEAR) is a hand tool designed to install various gears onto a gearshaft. It may be operated by a pushing or a striking force.
What is a Crimping Tool Die? 145 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is an Electrical Connector Inserter? 10 Items: An Electrical Connector Inserter (INSERTER,ELECTRICAL CONNECTOR) is a hand tool designed to hold an electrical connector, and to assist in the positioning and installation of the connector on a cover, panel or the like.
What is a Float? 11 Items: A Float is a tool used for concrete, plastering and grouting work.
What is a Mechanical Puller Set? 19 Items: A Mechanical Puller Set (PULLER SET,MECHANICAL) is two or more separate PULLER, MECHANICAL of different fixed sizes.
What is a Lifting Pneumatic Bag? 28 Items: A Lifting Pneumatic Bag (PNEUMATIC BAG,LIFTING) is a device made of flexible material designed to lift another item by being placed under the item and being inflated with air or some other gas. It will have a means of being connected to an air or gas source and may include a connector hose, a control valve and/or a pressure regulator.
What is a Lifting Pneumatic Bag Kit? 12 Items: A Lifting Pneumatic Bag Kit (PNEUMATIC BAG KIT,LIFTING) is a collection of items consisting of two or more PNEUMATIC BAG, LIFTING, connecting cords, lanyards, feeding hoses and the like required for lifting an item when normal jacking conditions are not applicable. May include items for packaging the individual parts.
What is a Bearing Staking Installation Tool? 14 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
What is a Sealant Dispenser? 15 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Retaining Ring Pliers Set? 10 Items: A Retaining Ring Pliers Set (PLIERS SET,RETAINING RING) is a group of PLIERS, RETAINING RING having different characteristics.
What is a Pedal Adjustment Tool Compressor? 38 Items: A Pedal Adjustment Tool Compressor (COMPRESSOR,TOOL,PEDAL ADJUSTMENT) is a hand tool having hinged leverage handles designed to compress both ends of a spring to facilitate installation.
What is a Plug Electrical Connector Extractor? 20 Items: A Plug Electrical Connector Extractor (EXTRACTOR,ELECTRICAL CONNECTOR,PLUG) is a hand tool designed to disassemble CONNECTOR, PLUG, ELECTRICAL from a CONNECTOR, RECEPTACLE, ELECTRICAL.
What is a Screwdriver Handle? 12 Items: A Screwdriver Handle (HANDLE,SCREWDRIVER) is an item used to accommodate various types of BIT, SCREWDRIVER. It is designed to rotate a bit that is used for installing or removing screws.
What is a Wire Twister Pliers? 11 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 313 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is a Flat Tip And Cross Tip Screwdriver Set? 22 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is an Oil Filter Wrench? 14 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 442 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Rotating Members Aligning Tool? 29 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
Arm,Handling Tool 16 Items
What is a Splicing Sleeve Compressing Tool? 11 Items: A Splicing Sleeve Compressing Tool (COMPRESSING TOOL,SPLICING SLEEVE) is a hand tool having hinged leverage handles similar to a CUTTER, BOLT or pliers, designed to compress a splicing sleeve when joining the ends of two conductors, or when forming an eye splice in the end of a wire rope. Excludes CRIMPING TOOL, TERMINAL, HAND.
Handle,Hydraulic Jack 30 Items
What is a Manual Impact Wrench? 17 Items: A Manual Impact Wrench (WRENCH,IMPACT,MANUAL) is a manually operated handheld tool consisting of spring-loaded handle and a power-impact head which delivers a torsional impact from either continuous movement of the handle in one direction, or by a reciprocating action. It is used in tightening and loosening fasteners, such as bolts, nuts, and the like. The item may include sockets, extensions and offset fittings, nut runners, and the like.
What is a Torque Screwdriver? 15 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.

Stock Items From Supply Class 5120 Page 50 of 62

5120-12-123-5896
Socket Wrench Crowfoot Attachment

121235896
440A-1 3/8: RNCC: 3 | RNVC: 2
03490060: RNCC: 5 | RNVC: 2
105618: RNCC: 5 | RNVC: 9
1950Z1-3-8: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-389-4639
Mechanical Puller Adapter

123894639
7997027-990945.005.0: RNCC: 3 | RNVC: 2

10 Jul 2012

5120-12-191-4079
Aufnahmevorrichtung

121914079
NO PRIMARY REF 12-191-4079: RNCC: 3 | RNVC: 2
H232/3: RNCC: 5 | RNVC: 9

1 Feb 1982

5120-12-158-9742
Electronic Equipment Alignment Tool

121589742
700-11H: RNCC: 3 | RNVC: 2
1-912: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-370-2295
Crowbar

123702295
SK909-264003.000.0: RNCC: 3 | RNVC: 2

9 Oct 2006

5120-12-309-5240
Hand Beading Tool

123095240
00009799302: RNCC: 3 | RNVC: 2
0000-9799-302: RNCC: 5 | RNVC: 2

30 Jan 1987

5120-12-144-6058
Dorn

121446058
1X46915011: RNCC: 3 | RNVC: 2
V91501-1: RNCC: 5 | RNVC: 2
2360-264217.01.0: RNCC: 5 | RNVC: 2
2360-264217.01.0: RNCC: 5 | RNVC: 9
2360-264217-01-0: RNCC: 5 | RNVC: 9
2360-264217.01.0: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-173-7401
Flat Tip Screwdriver

121737401
327-250-1,6X8 SONDERANFERTIGUNG: RNCC: 3 | RNVC: 2
1149P250X9: RNCC: 5 | RNVC: 9
131486: RNCC: 5 | RNVC: 9
8000-1-6X9X250: RNCC: 5 | RNVC: 9
A1-6X9X250DIN5265: RNCC: 5 | RNVC: 9

5 May 1978

5120-12-194-0483
Hydraulic Jack Handle

121940483
302 646.9: RNCC: 3 | RNVC: 2
0005833945: RNCC: 5 | RNVC: 2
302 646.9: RNCC: 5 | RNVC: 9

28 Sep 1982

5120-12-147-5926
Mechanical Puller

121475926
3M28R0EM2: RNCC: 3 | RNVC: 2
3MA28-2: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-318-2044
Ratchet Wrench

123182044
R1-1-VKT13: RNCC: 3 | RNVC: 2

20 Jun 1989

5120-12-363-7213
S Hand- Hakensatz

123637213
5419/6T: RNCC: 3 | RNVC: 2
1821562: RNCC: 5 | RNVC: 2

17 Jul 2004

5120-12-154-1026
Grundschlu Einsatz

121541026
CH1775-4: RNCC: 3 | RNVC: 2
839589310700: RNCC: 5 | RNVC: 2
CH1775-4: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-092-2281

5120-12-340-4836
Plier Clamp

123404836
8030: RNCC: 3 | RNVC: 2

23 Apr 1996

5120-12-310-6964
Socket Wrench

123106964
DIN3112-13-A: RNCC: 2 | RNVC: 2
0003-4240-030: RNCC: 3 | RNVC: 2
62420-13: RNCC: 5 | RNVC: 2
DSV35B13: RNCC: 5 | RNVC: 2
35B13: RNCC: 5 | RNVC: 9
0003-4240-030: RNCC: 5 | RNVC: 9

22 Jun 1987

5120-12-195-9045
Hand Tube Bender

121959045
BAV6-12: RNCC: 3 | RNVC: 2
C 5791 503 C: RNCC: 5 | RNVC: 2
909120102: RNCC: 5 | RNVC: 2
C 5791 503 C: RNCC: 5 | RNVC: 2

3 May 1983

5120-12-189-3451
Gewindedorn

121893451
30/5: RNCC: 3 | RNVC: 2

21 Sep 1981

5120-12-174-9539
Hole Sheet Metal Holder

121749539
234-2072K-32: RNCC: 3 | RNVC: 2
234-2072K-32: RNCC: 5 | RNVC: 2
234-2072K-32 0 3,2 MM: RNCC: 5 | RNVC: 9
2072K30: RNCC: 5 | RNVC: 9

9 Aug 1978

5120-12-193-1246
Open End Wrench

121931246
1778023-0.09: RNCC: 3 | RNVC: 2
1772083-0.09: RNCC: 5 | RNVC: 9

22 Jun 1982

5120-12-194-0845
Torque Wrench Adapter

121940845
TL5120-0086-820: RNCC: 2 | RNVC: 2
7452-9 11: RNCC: 5 | RNVC: 9
6263110013: RNCC: 5 | RNVC: 9
6612C-11: RNCC: 5 | RNVC: 9
733/10 11: RNCC: 5 | RNVC: 9

29 Sep 1982

5120-12-145-4111
Torque Wrench

121454111
NO PRIMARY REF 12-145-4111: RNCC: 3 | RNVC: 2
2360-264109.00.0: RNCC: 5 | RNVC: 2
2360-264109-00-0: RNCC: 5 | RNVC: 2
50070006: RNCC: 5 | RNVC: 9
2360-264109-00-0: RNCC: 5 | RNVC: 9
2360-264109.00.0: RNCC: 5 | RNVC: 9
750-6: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-363-6247
Combination Box And Open End Wrench Set

123636247
1952M/26T: RNCC: 3 | RNVC: 2
1057701: RNCC: 5 | RNVC: 2

9 Jul 2004

5120-12-329-9802
Socket Wrench Socket

123299802
0853 0230.125: RNCC: 3 | RNVC: 2
8530230.125: RNCC: 5 | RNVC: 2

17 Oct 1992

5120-12-331-4482
Schluessel

123314482
566-950: RNCC: 3 | RNVC: 2
5440403: RNCC: 5 | RNVC: 2

5 May 1993

5120-12-183-9527
Socket Wrench

121839527
90433308-00: RNCC: 3 | RNVC: 2
66.3507.662.00-A001: RNCC: 5 | RNVC: 2
9043 3 308-00: RNCC: 5 | RNVC: 2
9043 3 308-00: RNCC: 5 | RNVC: 9
90433308-00: RNCC: 5 | RNVC: 9

3 Jun 1980

5120-12-176-0480
Open End Wrench

121760480
C900M12X13: RNCC: 3 | RNVC: 2
C 5702 999: RNCC: 5 | RNVC: 2
C 5702 999: RNCC: 5 | RNVC: 2
103213: RNCC: 5 | RNVC: 2
C 900-M12X13: RNCC: 5 | RNVC: 2
C407-Z4-C84: RNCC: 5 | RNVC: 2
905011: RNCC: 5 | RNVC: 9
C900M12X13: RNCC: 6 | RNVC: 9

6 Nov 1978

5120-12-127-4112
Combination Box And Open End Wrench

121274112
60039432400018: RNCC: 3 | RNVC: 9
60039432400918: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-365-5749
Hand Tube Bender

123655749
278270: RNCC: 3 | RNVC: 2
278270: RNCC: 3 | RNVC: 2

17 Jan 2005

5120-12-197-1080
Tire Iron

121971080
83091400001: RNCC: 3 | RNVC: 2

20 Sep 1983

5120-12-388-0334
Crimping Tool Die

123880334
1187-08101: RNCC: 3 | RNVC: 2
80996250109: RNCC: 5 | RNVC: 2
80.99625-0109: RNCC: 5 | RNVC: 2

17 Feb 2012

5120-12-342-0750
Open End Wrench

123420750
DIN7446-16: RNCC: 2 | RNVC: 2
9800-16: RNCC: 3 | RNVC: 2

6 Dec 1996

5120-12-314-9577
Bearing And Bushing Inserter

123149577
P-0-715: RNCC: 3 | RNVC: 2
P-0-715: RNCC: 5 | RNVC: 9

1 Sep 1988

5120-12-150-3939
P Haltevorrichtung

121503939
1X46106177: RNCC: 3 | RNVC: 2
V106177: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-198-5894
Plier Clamp

121985894
210-141: RNCC: 3 | RNVC: 2
210-141-4-16: RNCC: 3 | RNVC: 2

14 Feb 1984

5120-12-321-2688
Torque Wrench

123212688
NO PRIMARY REF 12-321-2688: RNCC: 3 | RNVC: 2
62.7000.196.02-A001: RNCC: 5 | RNVC: 2
760NM/12: RNCC: 5 | RNVC: 9
760/12: RNCC: 5 | RNVC: 9

25 Apr 1990

5120-12-305-6747
Sp Montierwerkzeug

123056747
4V1378-A: RNCC: 3 | RNVC: 2
4V1378A: RNCC: 5 | RNVC: 9
4V1378-A: RNCC: 5 | RNVC: 9

3 Dec 1985

5120-12-363-8416
Bearing And Bushing Inserter

123638416
T671P5001208: RNCC: 3 | RNVC: 2

30 Jul 2004

5120-12-181-6940
Torque Wrench Adapter

121816940
29-3-1-2X45: RNCC: 3 | RNVC: 2

10 Dec 1979

5120-12-339-2171
Pliers

123392171
3512115ESD: RNCC: 3 | RNVC: 2
024835: RNCC: 5 | RNVC: 2

25 Oct 1995

5120-12-149-6886

5120-12-133-3217
Crimping Tool Die

121333217
05021: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-139-3029
Schluesseleinsatz

121393029
8205893307: RNCC: 3 | RNVC: 2
023M04200: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-350-8475
Machinist's Vise

123508475
10805 UND 10215: RNCC: 3 | RNVC: 2

29 May 2000

5120-12-023-2502

5120-12-347-5744
Spanner Wrench

123475744
4992014-500: RNCC: 3 | RNVC: 2

11 Jan 1999

5120-12-323-7457
Hand Beading Tool

123237457
15390101: RNCC: 3 | RNVC: 2
153 901 01: RNCC: 5 | RNVC: 2
BN511415: RNCC: 5 | RNVC: 2

13 Dec 1990

5120-12-347-8735
Socket Head Screw Key

123478735
6000157: RNCC: 3 | RNVC: 2

1 Mar 1999

5120-12-312-8130
Schluessel

123128130
ZG4035G014: RNCC: 3 | RNVC: 2
ZG 4035 G 014: RNCC: 5 | RNVC: 9
ZG4035G014: RNCC: 5 | RNVC: 9

10 Feb 1988

5120-12-126-4911
Hand Scraper Blade Burnisher

121264911
5498-1: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-390-2554
Box Wrench

123902554
6020000: RNCC: 3 | RNVC: 2
6020000: RNCC: 5 | RNVC: 2
2 65X70: RNCC: 5 | RNVC: 2
4010886602003: RNCC: 5 | RNVC: 2
2 65X70: RNCC: 5 | RNVC: 2
4010886602003: RNCC: 5 | RNVC: 2

23 Oct 2012

5120-12-306-8640
Face Spanner Wrench Socket

123068640
3-2816-162: RNCC: 3 | RNVC: 2
2816162: RNCC: 5 | RNVC: 2

11 Apr 1986

5120-12-134-2722
Auf- Gewindebuchse

121342722
007M00503: RNCC: 3 | RNVC: 2
007M00703: RNCC: 5 | RNVC: 2
VM68674-1: RNCC: 5 | RNVC: 2
VM68674/1: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-173-8186
Craftsman's Tweezers

121738186
9713-160-S-I: RNCC: 3 | RNVC: 2
5470I160: RNCC: 3 | RNVC: 9
108552: RNCC: 5 | RNVC: 2

16 May 1978

5120-12-133-3878
Combination Box And Open End Wrench

121333878
87AF5-8: RNCC: 3 | RNVC: 2
14A5-8: RNCC: 3 | RNVC: 2
1952Z5-8: RNCC: 3 | RNVC: 2
1B-5/8: RNCC: 3 | RNVC: 2
87AF5/8: RNCC: 5 | RNVC: 2
105754: RNCC: 5 | RNVC: 2
40503636: RNCC: 5 | RNVC: 2
603A-5/8: RNCC: 5 | RNVC: 9
603A5-8: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-127-2741
Ab Und Aufziehvorri

121272741
83.09143-6011: RNCC: 3 | RNVC: 2
83091436011: RNCC: 3 | RNVC: 2
WL8BBW: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-347-5673
Pliers

123475673
935-45 210: RNCC: 3 | RNVC: 2
935-210: RNCC: 5 | RNVC: 2

8 Jan 1999

5120-12-141-9642
Socket Head Screw Key

121419642
1997L-Z3/16: RNCC: 3 | RNVC: 2
105909: RNCC: 5 | RNVC: 2
571F002BL3-16IN: RNCC: 5 | RNVC: 9
6308L3-16IN: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-168-5835
Spanner Wrench

121685835
4900071-006000: RNCC: 3 | RNVC: 2
4900071-006000: RNCC: 5 | RNVC: 2
105712U: RNCC: 5 | RNVC: 9

23 Mar 1977

5120-12-181-1503
Screwdriver Bit

121811503
1096-8: RNCC: 3 | RNVC: 2

29 Oct 1979

5120-12-134-2670
Regl Montagehalter

121342670
009M01900: RNCC: 3 | RNVC: 2
VM76377: RNCC: 5 | RNVC: 2
VM76377: RNCC: 5 | RNVC: 2
VM76377: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-186-7309
Socket Wrench Socket

121867309
99355038: RNCC: 3 | RNVC: 2
416180: RNCC: 5 | RNVC: 9
416180: RNCC: 5 | RNVC: 9

2 Feb 1981

5120-12-302-7708
Spanner Wrench

123027708
FM7013: RNCC: 3 | RNVC: 2
MAGERD 9804: RNCC: 5 | RNVC: 9

29 Jan 1985

5120-12-126-1331

5120-12-041-6038

5120-12-331-4481
Spanner Wrench

123314481
566-959: RNCC: 3 | RNVC: 2
5440402: RNCC: 5 | RNVC: 2

5 May 1993

5120-12-311-1056
Mechanical Puller

123111056
425589003300: RNCC: 3 | RNVC: 2

27 Jul 1987

5120-12-092-2274

5120-12-339-6519
Woven Cable Grip

123396519
8364294: RNCC: 3 | RNVC: 2

18 Dec 1995

5120-12-134-2623
Schluessel

121342623
023M08200: RNCC: 3 | RNVC: 2
026M08200: RNCC: 5 | RNVC: 2
080M00900: RNCC: 5 | RNVC: 2
VM61536: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-375-2152
Torque Wrench Adapter

123752152
447A-1/4: RNCC: 3 | RNVC: 2
02470016: RNCC: 5 | RNVC: 2

5 May 2008

5120-12-376-2153
Ge Montierwerkzeug

123762153
2300211-990570.000.0: RNCC: 2 | RNVC: 2
2300211-990570.000.0: RNCC: 3 | RNVC: 2

26 Aug 2008

5120-12-322-7032
Hand Hammer

123227032
2300232-991000.035.0: RNCC: 2 | RNVC: 2
2300232-991000.035.0: RNCC: 5 | RNVC: 2
2300232-991000.035.00: RNCC: 5 | RNVC: 9
2300223-264099.00.0: RNCC: 5 | RNVC: 9
800-100-5: RNCC: 5 | RNVC: 9
2300223-264099.00.0: RNCC: 5 | RNVC: 9

13 Sep 1990

5120-12-337-0047
Hand Terminal Crimping Tool

123370047
VG95236T14A0002: RNCC: 2 | RNVC: 2
PZ16: RNCC: 3 | RNVC: 2
901260: RNCC: 5 | RNVC: 2
01.53.36.10: RNCC: 5 | RNVC: 9

10 Jan 1995

5120-12-305-2830
Torque Wrench

123052830
52249210: RNCC: 3 | RNVC: 2

16 Oct 1985

5120-12-129-7260
Spanner Wrench

121297260
6153157: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-362-6201
Mechanical Puller

123626201
2500261-993260.000.0: RNCC: 2 | RNVC: 2
2500261-993260.000.0: RNCC: 3 | RNVC: 2

12 Mar 2004

5120-12-374-4384
Spatula

123744384
8/PR10: RNCC: 3 | RNVC: 2
02.33.25.45: RNCC: 5 | RNVC: 2

18 Feb 2008

5120-12-363-2365
Piston Ring Expander

123632365
F30378005: RNCC: 3 | RNVC: 2

14 May 2004

5120-12-314-8280
L Einstellwerkzeug

123148280
1587426: RNCC: 3 | RNVC: 2

13 Aug 1988

5120-12-139-2512

5120-12-146-1127
Eindrueckplat Griff

121461127
23114-7101-16: RNCC: 2 | RNVC: 2
510203: RNCC: 3 | RNVC: 2
510203: RNCC: 5 | RNVC: 9
510203: RNCC: 5 | RNVC: 9
23114-7101-16: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-135-8745
Haken

121358745
35-10-62: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-123-5143
Open End Wrench

121235143
DIN894-11: RNCC: 2 | RNVC: 2
894-11: RNCC: 3 | RNVC: 2
100211-730: RNCC: 3 | RNVC: 2
11DIN894: RNCC: 5 | RNVC: 2
TVA5120-2-263-025.1.1.6: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-354-5648
Schluessel

123545648
4.901-055.0: RNCC: 3 | RNVC: 2

3 Aug 2001

5120-12-137-0956
Stauchvorrichtung

121370956
KDE2902: RNCC: 3 | RNVC: 9
0681340019: RNCC: 5 | RNVC: 2
EFEP250: RNCC: 5 | RNVC: 2
EFEP250A: RNCC: 5 | RNVC: 2
KDEP2902: RNCC: 5 | RNVC: 2
0681340019: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-384-0122
Mechanical Puller Attachment

123840122
F6780561: RNCC: 3 | RNVC: 2

12 Jan 2011

5120-12-196-2133
Socket Head Screw Key Set

121962133
1997M9T: RNCC: 3 | RNVC: 2

13 Jun 1983

5120-12-319-9815
Rivet Bucking Bar

123199815
750P3: RNCC: 3 | RNVC: 2

24 Nov 1989

5120-12-381-1949
Machinist's Scriber

123811949
458760: RNCC: 3 | RNVC: 2

19 Jan 2010

5120-12-026-1716

5120-12-165-0259
Pliers

121650259
4160-1: RNCC: 3 | RNVC: 9

30 May 1969

5120-12-361-1999
Mechanical Puller

123611999
CBD32591G01: RNCC: 3 | RNVC: 2

3 Sep 2003

5120-12-181-6570
Torque Wrench

121816570
NO PRIMARY REF 12-181-6570: RNCC: 3 | RNVC: 2
001589262100: RNCC: 5 | RNVC: 2
760NM/75 UND 3115: RNCC: 5 | RNVC: 2
76NM75: RNCC: 5 | RNVC: 9
76NM/75: RNCC: 5 | RNVC: 9
760/75-3115: RNCC: 5 | RNVC: 9
760NM/75-3115: RNCC: 5 | RNVC: 9
760NM/75-3116/1: RNCC: 5 | RNVC: 9
5120-01132: RNCC: 6 | RNVC: 9

10 Dec 1979

5120-12-123-5088
Open End Wrench

121235088
NO PRIMARY REF 12-123-5088: RNCC: 3 | RNVC: 2
105037: RNCC: 5 | RNVC: 9
1932WM3-5X4: RNCC: 5 | RNVC: 9
00600: RNCC: 5 | RNVC: 9
1203110001: RNCC: 5 | RNVC: 9
330-3,5X4: RNCC: 5 | RNVC: 9
330-3-5X4: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-341-6561
Socket Head Screw Key

123416561
05022074001: RNCC: 3 | RNVC: 2
10767A-5/32: RNCC: 3 | RNVC: 2
950PKL-5/32: RNCC: 5 | RNVC: 2
43570010: RNCC: 5 | RNVC: 2
43570010: RNCC: 5 | RNVC: 2
022074: RNCC: 5 | RNVC: 9

11 Oct 1996

5120-12-178-3286
Open End Wrench

121783286
NO PRIMARY REF 12-178-3286: RNCC: 3 | RNVC: 2
12E1BA: RNCC: 5 | RNVC: 9
8M1BA: RNCC: 5 | RNVC: 9
40769898: RNCC: 5 | RNVC: 9
609854: RNCC: 5 | RNVC: 9

12 Apr 1979

5120-12-368-2626
Socket Wrench Screwdriver Attachment

123682626
2049-5: RNCC: 3 | RNVC: 2
02151005: RNCC: 5 | RNVC: 2

18 Jan 2006

5120-12-320-8141
Open End Wrench

123208141
146-3,5X3,5: RNCC: 3 | RNVC: 2

19 Feb 1990

5120-12-331-7652
Mater Saug- Griff

123317652
80996060005: RNCC: 3 | RNVC: 2
2.7103: RNCC: 3 | RNVC: 2
80.99606.0005: RNCC: 5 | RNVC: 2
1127103: RNCC: 5 | RNVC: 2

18 Jun 1993

5120-12-331-5172
Socket Wrench Adapter

123315172
0-024: RNCC: 3 | RNVC: 2

12 May 1993

5120-12-377-0560
Schlu Aufnahmeteil

123770560
1030027-972010.000.0: RNCC: 3 | RNVC: 2

9 Dec 2008

5120-12-022-6095

5120-12-010-9687

5120-12-390-5166
Fixed Open End Wrench Set

123905166
517.0125: RNCC: 3 | RNVC: 2

19 Nov 2012

5120-12-362-5253
Rivet Bucking Bar

123625253
417007: RNCC: 3 | RNVC: 2

4 Mar 2004

5120-12-315-6959
Spanner Wrench

123156959
503377: RNCC: 3 | RNVC: 2

22 Nov 1988

5120-12-314-6931
Socket Head Screw Key

123146931
334-56: RNCC: 3 | RNVC: 2

29 Jul 1988

5120-12-188-7008
Mechanical Puller Attachment

121887008
100278-71000.01.0: RNCC: 2 | RNVC: 2
100278-71000.01.0: RNCC: 3 | RNVC: 2
100278-71000-01-0: RNCC: 5 | RNVC: 9
100278-71000.01.0: RNCC: 5 | RNVC: 9

27 Jul 1981

5120-12-181-9735
Treiber

121819735
VW30-20: RNCC: 3 | RNVC: 9

28 Dec 1979

5120-12-301-2244
Flat Tip Screwdriver

123012244
140-9X150: RNCC: 3 | RNVC: 2
140-150-9: RNCC: 5 | RNVC: 2

28 Sep 1984

5120-12-311-0352
Wrench Extension Handle

123110352
0453-1: RNCC: 3 | RNVC: 2
71111240892: RNCC: 5 | RNVC: 2
07008000150: RNCC: 5 | RNVC: 2
1240892.9: RNCC: 5 | RNVC: 9

21 Jul 1987

5120-12-140-4073
Screwdriver Bit

121404073
72-1: RNCC: 3 | RNVC: 2
109148: RNCC: 5 | RNVC: 2
7082A: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-365-0099
Flat Tip Screwdriver

123650099
4-601: RNCC: 3 | RNVC: 2

23 Nov 2004

5120-12-175-3968
Open End Wrench

121753968
EV4-832: RNCC: 3 | RNVC: 2
EV4-832: RNCC: 5 | RNVC: 9

13 Sep 1978

5120-12-196-6972
Spanner Wrench

121966972
4900059-721160.000.0: RNCC: 2 | RNVC: 2
4900059-721160.000.0: RNCC: 3 | RNVC: 2
4900059-721160.000.0: RNCC: 5 | RNVC: 2
4900059-721160-000-0: RNCC: 5 | RNVC: 2

3 Aug 1983

5120-12-333-4593
Mechanical Puller Set

123334593
88270-24A: RNCC: 3 | RNVC: 2
882700-24A: RNCC: 3 | RNVC: 2
8827024A: RNCC: 5 | RNVC: 2

20 Dec 1993

5120-12-123-5390
Socket Wrench

121235390
NO PRIMARY REF 12-123-5390: RNCC: 3 | RNVC: 2
212217: RNCC: 5 | RNVC: 9
26R11X14: RNCC: 5 | RNVC: 9
26R11X14: RNCC: 5 | RNVC: 9
26R11X14: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-381-8436
Socket Head Screw Key Set

123818436
911BZ7: RNCC: 3 | RNVC: 2
IS-62646/7: RNCC: 5 | RNVC: 2
44842: RNCC: 5 | RNVC: 2

9 Apr 2010

5120-12-322-5161
Seal Inserter

123225161
038.007.1: RNCC: 3 | RNVC: 2
038.007.1-4: RNCC: 5 | RNVC: 2
790515077: RNCC: 5 | RNVC: 2

29 Aug 1990

5120-12-344-8110
Fixed Open End Wrench Set

123448110
1931M/10T: RNCC: 3 | RNVC: 2
1049409: RNCC: 5 | RNVC: 2

11 Dec 1997

5120-12-123-5877
Box Wrench

121235877
113AF7/32X15/64MB: RNCC: 3 | RNVC: 2
00.27.28.12: RNCC: 5 | RNVC: 2
113AF7-32X15-64MB: RNCC: 5 | RNVC: 2
4SZ7-32X15-64: RNCC: 5 | RNVC: 9
100301: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-156-1549
Hand Lead Seal Press

121561549
NM485: RNCC: 3 | RNVC: 2
NM485: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-332-5907
Driftpin

123325907
0851 8908.013: RNCC: 3 | RNVC: 2

25 Aug 1993

5120-12-130-3389

5120-12-135-0202
Socket Wrench

121350202
NO PRIMARY REF 12-135-0202: RNCC: 3 | RNVC: 2
105387: RNCC: 5 | RNVC: 9
1945NKBM5-5: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-146-0592
Einstell- Dorn

121460592
23114-7101-09: RNCC: 2 | RNVC: 2
510161: RNCC: 5 | RNVC: 2
510161: RNCC: 5 | RNVC: 9
23114-7101-09: RNCC: 5 | RNVC: 9
510161: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-178-6477
Abzieher

121786477
VG95211-ML-121786477: RNCC: 2 | RNVC: 2
01TC31090-03: RNCC: 3 | RNVC: 2
01TC31004-03: RNCC: 5 | RNVC: 9

7 May 1979

5120-12-311-1466
Socket Head Screw Key Set

123111466
62 750/5: RNCC: 3 | RNVC: 2
09150: RNCC: 5 | RNVC: 9
352/5: RNCC: 5 | RNVC: 9

31 Jul 1987

5120-12-306-0086
Drive Pin Punch

123060086
3659D0,9: RNCC: 3 | RNVC: 2
3659D.0.9: RNCC: 5 | RNVC: 2

20 Jan 1986

5120-12-305-9655
Niet Haltewerkzeug

123059655
4900059-721370.000.0: RNCC: 2 | RNVC: 2
4900059-721370.000.0: RNCC: 3 | RNVC: 2

14 Jan 1986

5120-12-150-4294
Dorn

121504294
838589074300: RNCC: 3 | RNVC: 2
8385890743: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-366-8560
Flat Tip Screwdriver

123668560
4725ESD 04: RNCC: 3 | RNVC: 2

15 Jun 2005

5120-12-126-2594
Pliers

121262594
53214: RNCC: 3 | RNVC: 2
4978: RNCC: 5 | RNVC: 2
573H101: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-345-3551
Oelfilt Schluessel

123453551
114650: RNCC: 3 | RNVC: 2
2169: RNCC: 3 | RNVC: 2
90000114650: RNCC: 5 | RNVC: 2

4 Mar 1998

5120-12-150-6259
Montagevorrichtung

121506259
510265: RNCC: 2 | RNVC: 2
510265: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-332-6909
Spanner Wrench

123326909
9108510160: RNCC: 3 | RNVC: 2

7 Sep 1993

5120-12-310-9731
Mechanical Puller Adapter

123109731
363589026300: RNCC: 3 | RNVC: 2
363 589 02 63 00: RNCC: 5 | RNVC: 2

14 Jul 1987

5120-12-126-2469
Flat Tip Screwdriver

121262469
8001: RNCC: 3 | RNVC: 2
145-1: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-094-0335

5120-12-388-0636
Open End Box Wrench

123880636
00497222480: RNCC: 3 | RNVC: 2

22 Feb 2012

5120-12-364-3468
Combination Box And Open End Wrench

123643468
40081010-TCS: RNCC: 3 | RNVC: 2

14 Sep 2004

5120-12-310-9781
Mechanical Puller

123109781
80996010077: RNCC: 3 | RNVC: 2
80.99601.0077: RNCC: 5 | RNVC: 2

15 Jul 1987

5120-12-121-6893

5120-12-151-5058

5120-12-127-3942

5120-12-360-3750
Aufblasbare Tasche

123603750
416.1047: RNCC: 3 | RNVC: 2

15 May 2003

5120-12-120-9169
Socket Wrench Socket

121209169
20L-5/16: RNCC: 3 | RNVC: 2
TEL10: RNCC: 5 | RNVC: 2
40AL5-16: RNCC: 5 | RNVC: 9
108882: RNCC: 5 | RNVC: 9
6800Z5-16: RNCC: 5 | RNVC: 9
01420020: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-312-2039
Socket Wrench Set

123122039
NO PRIMARY REF 12-312-2039: RNCC: 3 | RNVC: 2
456/15/6: RNCC: 5 | RNVC: 9
96021104: RNCC: 5 | RNVC: 9

3 Dec 1987

5120-12-173-6913
Spanner Wrench

121736913
009-515.140-000: RNCC: 2 | RNVC: 2
5222-200: RNCC: 2 | RNVC: 2
009-515.140-000: RNCC: 3 | RNVC: 2
009-515-140: RNCC: 5 | RNVC: 2
09-515-140: RNCC: 5 | RNVC: 2
5222-200: RNCC: 5 | RNVC: 2
5222-200: RNCC: 5 | RNVC: 9

3 May 1978

5120-12-368-9058
Box Wrench

123689058
110A-11/16X3/4: RNCC: 3 | RNVC: 2
00.26.70.51: RNCC: 5 | RNVC: 2

4 May 2006

5120-12-198-1731
Socket Wrench

121981731
2.72-19472: RNCC: 3 | RNVC: 2
2.72-19472: RNCC: 5 | RNVC: 2

27 Dec 1983

5120-12-123-5293
Box Wrench

121235293
NO PRIMARY REF 12-123-5293: RNCC: 3 | RNVC: 2
2-417: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-381-5436
Socket Wrench Socket

123815436
40ADV-5/16: RNCC: 3 | RNVC: 2
01650020: RNCC: 5 | RNVC: 2

2 Mar 2010

5120-12-365-9152
Swivel Knob Jeweler's Screwdriver

123659152
T4880X 256: RNCC: 3 | RNVC: 2

17 Feb 2005

5120-12-153-7188
Torque Wrench Adapter

121537188
CH2294-2-2NM: RNCC: 3 | RNVC: 2
8395890603/00: RNCC: 5 | RNVC: 2
839589060300: RNCC: 5 | RNVC: 2
CH2294-2-2NM: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-390-1306
Lager- Un Aufnahme

123901306
437589003100: RNCC: 3 | RNVC: 2

9 Oct 2012

5120-12-044-4928

5120-12-172-1868
Socket Wrench Crowfoot Attachment

121721868
3S51609-0000: RNCC: 3 | RNVC: 2

3 Jan 1978

5120-12-313-0528
Hydraulisc Adapter

123130528
19861: RNCC: 3 | RNVC: 2

1 Mar 1988

5120-12-364-3373
Socket Wrench Socket

123643373
02010011-TCS: RNCC: 3 | RNVC: 2

11 Sep 2004

5120-12-167-1517
Mit Winkel- Griff

121671517
VG95211-ML-121671517: RNCC: 2 | RNVC: 2
105-071-498-9: RNCC: 3 | RNVC: 2

25 Nov 1976

5120-12-174-9396
Adjustable Wrench

121749396
NM280-03: RNCC: 3 | RNVC: 2
NM280-03: RNCC: 5 | RNVC: 9

9 Aug 1978

5120-12-123-4990
Hand Rivet Set

121234990
30671: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-335-4109
Mechanical Puller

123354109
0852 4529: RNCC: 3 | RNVC: 2
8524529: RNCC: 5 | RNVC: 2

17 Aug 1994

5120-12-123-5266

5120-12-180-9634
Mechanical Puller

121809634
30AM002-101: RNCC: 3 | RNVC: 2

12 Oct 1979

5120-12-386-7914
Hand Roller

123867914
60.00.43: RNCC: 3 | RNVC: 2
10-04.284: RNCC: 5 | RNVC: 2

30 Sep 2011

5120-12-184-9054
Klemmbacke

121849054
FA0002-31: RNCC: 3 | RNVC: 2
FA0002-31: RNCC: 5 | RNVC: 9

26 Aug 1980

5120-12-168-3691
Montagewerkzeug

121683691
2360-264310.00.0: RNCC: 2 | RNVC: 2
2360-264310.00.0: RNCC: 3 | RNVC: 2
90600760000003: RNCC: 3 | RNVC: 2
2360-264310-00-0: RNCC: 5 | RNVC: 2
2360-264310.00.0: RNCC: 5 | RNVC: 2
2360-264310-00-0: RNCC: 5 | RNVC: 2
906076: RNCC: 5 | RNVC: 2
2360-264310-00-0: RNCC: 5 | RNVC: 9
2360-264310.00.0: RNCC: 5 | RNVC: 9

10 Mar 1977

5120-12-126-2335
Sheet Metalworking Stake

121262335
27.01-100: RNCC: 3 | RNVC: 2
5309-100: RNCC: 5 | RNVC: 2
0027010100: RNCC: 5 | RNVC: 2
140B-100: RNCC: 5 | RNVC: 2
53621-6: RNCC: 5 | RNVC: 9
53621060: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-313-9072
Sheet Metalworking Stake

123139072
156D-2: RNCC: 3 | RNVC: 2
156D: RNCC: 5 | RNVC: 2

18 May 1988

5120-12-194-4463
Zentrierstueck

121944463
23-JK-250-065-1: RNCC: 3 | RNVC: 2
T-473: RNCC: 5 | RNVC: 9

3 Nov 1982

5120-12-126-4689
Electronic Equipment Alignment Tool

121264689
NO PRIMARY REF 12-126-4689: RNCC: 3 | RNVC: 2
108709: RNCC: 5 | RNVC: 9
5522: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-021-2560

5120-12-368-4010
Box Wrench

123684010
AZ8149T029: RNCC: 3 | RNVC: 2

7 Mar 2006

5120-12-192-1052
Ausziehvorrichtung

121921052
3D18510: RNCC: 3 | RNVC: 2
3D18510: RNCC: 5 | RNVC: 2
3D18510: RNCC: 5 | RNVC: 2

23 Mar 1982

5120-12-374-6549
Aligning Punch

123746549
F6278211: RNCC: 3 | RNVC: 2

4 Mar 2008

5120-12-370-7632
Piston Inserter

123707632
T10145: RNCC: 3 | RNVC: 2

18 Dec 2006

5120-12-391-0168
Rotat Holding Tool

123910168
F6783166: RNCC: 3 | RNVC: 2

15 Jan 2013

5120-12-137-8331

5120-12-178-4621
Einbauwerkzeug

121784621
CIT8: RNCC: 3 | RNVC: 2

26 Apr 1979

5120-12-381-3546
Socket Wrench

123813546
9045810001: RNCC: 3 | RNVC: 2
A9045810001: RNCC: 5 | RNVC: 2

4 Feb 2010

5120-12-365-3422
Spanner Wrench

123653422
5120-00047-000000: RNCC: 3 | RNVC: 2

21 Dec 2004

5120-12-197-1415
Anschlag- Hebel

121971415
4900059-751340.000.0: RNCC: 3 | RNVC: 2
4900059-751340-000-0: RNCC: 5 | RNVC: 2

26 Sep 1983

5120-12-121-1288
Hand Tube Bender Set

121211288
TL5120-0118: RNCC: 2 | RNVC: 2
03.9310-0030.3: RNCC: 3 | RNVC: 2
3931004003: RNCC: 5 | RNVC: 2
5120-90176: RNCC: 6 | RNVC: 9

30 May 1969

5120-12-337-2007
Seal Inserter

123372007
318589001500: RNCC: 3 | RNVC: 2
3185890015/00: RNCC: 3 | RNVC: 2

1 Feb 1995

5120-12-365-5694
Box Wrench

123655694
230A-5/16X3/8: RNCC: 3 | RNVC: 2
41612024: RNCC: 5 | RNVC: 2

17 Jan 2005

5120-12-133-5947
Open End Wrench

121335947
NO PRIMARY REF 12-133-5947: RNCC: 3 | RNVC: 2
610-1 5-16: RNCC: 5 | RNVC: 9
610-1 5-16: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-127-2738
Mechanical Puller

121272738
83.01943-6014: RNCC: 3 | RNVC: 2
83.09143-6014: RNCC: 3 | RNVC: 2
83019436014: RNCC: 3 | RNVC: 2
83091436014: RNCC: 3 | RNVC: 2
WL5ABW: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-354-4746
Socket Head Screw Key

123544746
624800-TX10: RNCC: 3 | RNVC: 2
62480-TX10: RNCC: 5 | RNVC: 9

17 Jul 2001

5120-12-363-8413
C Clamp

123638413
T671P5001119: RNCC: 3 | RNVC: 2

30 Jul 2004

5120-12-123-5997
Socket Wrench Socket

121235997
47A11-16: RNCC: 3 | RNVC: 2
02440038: RNCC: 5 | RNVC: 2
7410DZ11-16: RNCC: 5 | RNVC: 9
109525: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-339-7800
Pliers

123397800
5828 3 047-00: RNCC: 3 | RNVC: 2
C39407-A139-A2: RNCC: 5 | RNVC: 2
5828 3 047-00: RNCC: 5 | RNVC: 9

17 Jan 1996

5120-12-152-4224
Flat Tip Screwdriver

121524224
NO PRIMARY REF 12-152-4224: RNCC: 3 | RNVC: 2
6059082: RNCC: 5 | RNVC: 2
8007-3: RNCC: 5 | RNVC: 9
5-712-39: RNCC: 5 | RNVC: 9
9213 068072: RNCC: 5 | RNVC: 9
9213068072: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-190-3668
Open End Box Wrench

121903668
MKV1150/4501.01.02.08: RNCC: 3 | RNVC: 2

24 Nov 1981

5120-12-347-1711
Drain Plug Wrench

123471711
1041: RNCC: 3 | RNVC: 2
74410001: RNCC: 5 | RNVC: 2

5 Nov 1998

5120-12-342-6697
Electrical Contact Remover

123426697
18781 24246: RNCC: 2 | RNVC: 2
1878124246: RNCC: 3 | RNVC: 2
18781 24246: RNCC: 5 | RNVC: 9

13 Mar 1997

5120-12-187-6881
Mechanical Puller

121876881
3301001000: RNCC: 3 | RNVC: 2
3301001000: RNCC: 5 | RNVC: 2
BZ14: RNCC: 5 | RNVC: 2

27 Apr 1981

5120-12-304-0705
Mechanical Puller Adapter

123040705
010-24-21-799-02: RNCC: 3 | RNVC: 2

7 Jun 1985

5120-12-191-9354
Stuetze

121919354
NO PRIMARY REF 12-191-9354: RNCC: 3 | RNVC: 2
416240: RNCC: 5 | RNVC: 9

16 Mar 1982

5120-12-303-6316
A Spannvorrichtung

123036316
NO PRIMARY REF 12-303-6316: RNCC: 3 | RNVC: 2
VV553/82: RNCC: 5 | RNVC: 9

16 Apr 1985

5120-12-183-7093
Spanner Wrench

121837093
3S51605-0000: RNCC: 3 | RNVC: 2

13 May 1980

5120-12-367-6195
Hand Shovel

123676195
909180702: RNCC: 3 | RNVC: 2

13 Sep 2005

5120-12-126-1401
Hand Rivet Set

121261401
DIN6435-B5: RNCC: 2 | RNVC: 2
585 005: RNCC: 3 | RNVC: 2
251-5: RNCC: 5 | RNVC: 2
B5DIN6435: RNCC: 5 | RNVC: 2
2552-5: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-199-0768

5120-12-338-2701
Hand Hammer

123382701
DIN6475-8S: RNCC: 2 | RNVC: 2
8SDIN6475: RNCC: 5 | RNVC: 9

13 Jun 1995

5120-12-351-3296
Socket Head Screw Key

123513296
08061260014: RNCC: 3 | RNVC: 2
624900TX60: RNCC: 5 | RNVC: 2
62490TX60: RNCC: 5 | RNVC: 2
08.06126-0014: RNCC: 5 | RNVC: 2

13 Jul 2000

5120-12-393-8008
Screwdriver Bit

123938008
05066660001: RNCC: 3 | RNVC: 2
871/4-2X50: RNCC: 5 | RNVC: 2

14 Oct 2013

5120-12-146-7571
Spanner Wrench

121467571
02170: RNCC: 3 | RNVC: 2
25704-360400-03-0: RNCC: 5 | RNVC: 2
02170: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-368-8077
Combination Box And Open End Wrench

123688077
40100909-TCS: RNCC: 3 | RNVC: 2

24 Apr 2006

5120-12-094-1274

5120-12-382-2004
Retaining Ring Pliers

123822004
EH 4305: RNCC: 3 | RNVC: 2
01.57.84.70: RNCC: 5 | RNVC: 2

20 May 2010

5120-12-380-5204
Socket Wrench Socket

123805204
1878256895: RNCC: 3 | RNVC: 2

5 Nov 2009

5120-12-311-1050
Torque Wrench Adapter

123111050
R809232: RNCC: 3 | RNVC: 2
000589650300: RNCC: 3 | RNVC: 2
RSBH13: RNCC: 5 | RNVC: 2
809232: RNCC: 5 | RNVC: 2
809232: RNCC: 5 | RNVC: 9
SBH13: RNCC: 5 | RNVC: 9

27 Jul 1987

5120-12-332-5905
Driftpin

123325905
0851 8908.012: RNCC: 3 | RNVC: 2

25 Aug 1993

5120-12-390-4149
Mechanical Puller Adapter

123904149
F6375397: RNCC: 3 | RNVC: 2

9 Nov 2012

5120-12-304-7117
Mechanical Puller Attachment

123047117
NO PRIMARY REF 12-304-7117: RNCC: 3 | RNVC: 2
444-31-072-000: RNCC: 5 | RNVC: 9

14 Aug 1985

5120-12-126-1405
Hand Rivet Set

121261405
NO PRIMARY REF 12-126-1405: RNCC: 3 | RNVC: 2
574E004-9: RNCC: 5 | RNVC: 9
B9DIN6435: RNCC: 5 | RNVC: 9
DIN6435-B9: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-321-8037
Hyd Einbauwerkzeug

123218037
41408-T605: RNCC: 3 | RNVC: 2
41408-T-605: RNCC: 5 | RNVC: 2

28 Jun 1990

5120-12-301-1211
Blindni Mundstueck

123011211
HKW-014105: RNCC: 3 | RNVC: 2
HKW014105: RNCC: 5 | RNVC: 2

22 Sep 1984

5120-12-336-6837
Hand Hammer

123366837
543K0010: RNCC: 3 | RNVC: 2
0008600100: RNCC: 5 | RNVC: 2

7 Dec 1994

5120-12-305-8123
Spanner Wrench

123058123
0376558: RNCC: 3 | RNVC: 2
0376558: RNCC: 5 | RNVC: 2

17 Dec 1985

5120-12-307-1720
Spanner Wrench

123071720
SR: RNCC: 3 | RNVC: 2

16 May 1986

5120-12-133-4483

5120-12-070-0147

5120-12-319-3186
Crimping Tool Die

123193186
62141 104: RNCC: 3 | RNVC: 2
62051-104: RNCC: 5 | RNVC: 2

22 Sep 1989

5120-12-301-1210
Blindni Mundstueck

123011210
HKW-014104: RNCC: 3 | RNVC: 2
HKW014104: RNCC: 5 | RNVC: 2

22 Sep 1984

5120-12-363-9847
Bearing And Bushing Inserter

123639847
T671P5002266: RNCC: 3 | RNVC: 2

10 Aug 2004

5120-12-361-1950
Boerdelwer Einsatz

123611950
80996060227: RNCC: 3 | RNVC: 2
80.99606-0227: RNCC: 5 | RNVC: 2

2 Sep 2003

5120-12-312-1617
Hand Hydraulic Jack

123121617
TL5120-0090-30: RNCC: 2 | RNVC: 2
250.098.1: RNCC: 3 | RNVC: 2
ATDX 3-185: RNCC: 5 | RNVC: 2
4635800118: RNCC: 5 | RNVC: 2
210.983.2: RNCC: 5 | RNVC: 9
311.301.9: RNCC: 5 | RNVC: 9
313.910.7: RNCC: 5 | RNVC: 9
ATDX 2,5-185: RNCC: 5 | RNVC: 9
0015831815: RNCC: 5 | RNVC: 9
208.634.4: RNCC: 5 | RNVC: 9

27 Nov 1987

5120-12-021-2464

5120-12-196-4571
Bearing And Bushing Inserter

121964571
3083: RNCC: 3 | RNVC: 2
C 6680 006: RNCC: 5 | RNVC: 2

11 Jul 1983

5120-12-315-4367
Spanner Wrench

123154367
4987077: RNCC: 3 | RNVC: 2

1 Jul 1998

5120-12-094-1300

5120-12-359-6715
Bearing And Bushing Inserter And Remover

123596715
T631P3001051: RNCC: 3 | RNVC: 2

26 Feb 2003

5120-12-364-6800
Socket Wrench Socket

123646800
03020014-TCS: RNCC: 3 | RNVC: 2

20 Oct 2004

5120-12-316-1770
Box Wrench

123161770
640-24: RNCC: 3 | RNVC: 2
1307110001: RNCC: 5 | RNVC: 2

29 Dec 1988

5120-12-322-8529
Hole Sheet Metal Holder

123228529
245-2072KU-64 X 15 0 6,4 MM: RNCC: 3 | RNVC: 2
245-2072KU-64X15: RNCC: 5 | RNVC: 2

28 Sep 1990

5120-12-126-2137
Flat Tip Screwdriver

121262137
C8000-6-100: RNCC: 3 | RNVC: 2
8008: RNCC: 5 | RNVC: 2
C 5721 998: RNCC: 5 | RNVC: 2
1100414: RNCC: 5 | RNVC: 2
C 5721 998: RNCC: 5 | RNVC: 2
C407-Z4-C62: RNCC: 5 | RNVC: 2
901603: RNCC: 5 | RNVC: 9
110041: RNCC: 5 | RNVC: 9
C8000-0-8X6X100: RNCC: 5 | RNVC: 9
C8000-1-0X6X100: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-171-2103
Splicing Sleeve Compressing Tool

121712103
B4-1263: RNCC: 3 | RNVC: 2
C 5734 997: RNCC: 5 | RNVC: 2
3895/005-50: RNCC: 6 | RNVC: 9
5120-30200: RNCC: 6 | RNVC: 9

16 Sep 1977

5120-12-365-3295
Seal Inserter And Remover

123653295
5583236: RNCC: 3 | RNVC: 2
M55.093.049: RNCC: 5 | RNVC: 2
(241)A4249M55.093.049: RNCC: 8 | RNVC: 2

21 Dec 2004

5120-12-314-1735
Ausdrueckwerkzeug

123141735
0852 8770: RNCC: 3 | RNVC: 2
8528770: RNCC: 5 | RNVC: 2

15 Jun 1988

5120-12-323-4220
Blacksmith's Anvil

123234220
14169: RNCC: 3 | RNVC: 9

23 Nov 1990

5120-12-173-4207
Drive Pin Punch

121734207
3644-165: RNCC: 3 | RNVC: 9
107477: RNCC: 5 | RNVC: 2
D5DIN6458: RNCC: 5 | RNVC: 9

13 Apr 1978

5120-12-304-4149
Mechanical Puller

123044149
009-088.220-000W8: RNCC: 3 | RNVC: 2

16 Jul 1985

5120-12-319-4533
Lager- Und Einsatz

123194533
99374119: RNCC: 3 | RNVC: 2

3 Oct 1989

5120-12-181-7088
Spanner Wrench

121817088
264-284: RNCC: 3 | RNVC: 2

12 Dec 1979

5120-12-387-2614
Piston Ring Compressor

123872614
200.078: RNCC: 3 | RNVC: 2

22 Nov 2011

5120-12-392-6894
Driftpin

123926894
CTP40708G101: RNCC: 3 | RNVC: 2

28 Jun 2013

5120-12-390-6515
Carrier Socket

123906515
7125119: RNCC: 3 | RNVC: 2

30 Nov 2012

5120-12-192-3880
Spannvorrichtung

121923880
5905890031/00: RNCC: 3 | RNVC: 2
590589003100: RNCC: 5 | RNVC: 2

20 Apr 1982

5120-12-127-0427
Socket Wrench Socket

121270427
DG30-14: RNCC: 3 | RNVC: 2
47-14: RNCC: 3 | RNVC: 2
0204 0014-N: RNCC: 5 | RNVC: 2
02040014: RNCC: 5 | RNVC: 2
109512: RNCC: 5 | RNVC: 9
182037: RNCC: 5 | RNVC: 9
7410DM14: RNCC: 5 | RNVC: 9
A7410DM14: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-320-0898
W Spannvorrichtung

123200898
4312 711 15810: RNCC: 3 | RNVC: 2
4900192-030000.00: RNCC: 5 | RNVC: 2
4900192-030000.00: RNCC: 5 | RNVC: 9

6 Dec 1989

5120-12-318-2048
Ratchet Wrench

123182048
R2-2-VKT16: RNCC: 3 | RNVC: 2

20 Jun 1989

5120-12-391-4032
Socket Wrench

123914032
SSG36G: RNCC: 3 | RNVC: 2

11 Mar 2013

5120-12-334-5392
Mechanical Puller Attachment

123345392
0853 0170.001: RNCC: 3 | RNVC: 2

20 May 1994

5120-12-094-1306

5120-12-344-2069
Socket Wrench

123442069
JD896B-1 7/16 X 1 5/8: RNCC: 3 | RNVC: 9
JD896B-1 7/16"X1 5/8": RNCC: 5 | RNVC: 9

29 Sep 1997

5120-12-370-8837
Socket Wrench Socket

123708837
80996036029: RNCC: 3 | RNVC: 2
80.99603-6029: RNCC: 5 | RNVC: 2

11 Jan 2007

5120-12-368-8210
Pliers

123688210
2430 G-200 IP: RNCC: 3 | RNVC: 2
00.14.82.27: RNCC: 5 | RNVC: 2
0100835: RNCC: 5 | RNVC: 2
00.14.79.24: RNCC: 5 | RNVC: 2

25 Apr 2006

5120-12-139-2541
Abziehvorrichtung

121392541
VM78689: RNCC: 3 | RNVC: 2
006M04600: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-340-9827
Hand Terminal Crimping Tool

123409827
K28: RNCC: 3 | RNVC: 2

11 Jul 1996

5120-12-307-4212
Pliers

123074212
331.457: RNCC: 3 | RNVC: 2

18 Jun 1986

5120-12-092-2270

5120-12-357-2428
Socket Wrench

123572428
0005814801: RNCC: 3 | RNVC: 2

24 May 2002

5120-12-345-4454
Inspection Mirror

123454454
12921-30: RNCC: 3 | RNVC: 2
77 40 00 02: RNCC: 5 | RNVC: 2

17 Mar 1998

5120-12-372-5382
Spanner Wrench

123725382
110130: RNCC: 3 | RNVC: 2

26 Jul 2007

5120-12-135-4926
Hand Hammer

121354926
55493-6-0: RNCC: 3 | RNVC: 2
51197100: RNCC: 3 | RNVC: 2
574A362-1000: RNCC: 3 | RNVC: 2
51197-1: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-190-0650
Druck- Spindel

121900650
2300109-990981.000.0: RNCC: 2 | RNVC: 2
2300109-990981.000.0: RNCC: 3 | RNVC: 2
2300109-990981.000.0: RNCC: 3 | RNVC: 2
2300109-990981-000-0: RNCC: 5 | RNVC: 2

5 Nov 1981

5120-12-314-5355
Combination Box And Open End Wrench

123145355
NO PRIMARY REF 12-314-5355: RNCC: 3 | RNVC: 2
1505120011: RNCC: 5 | RNVC: 2
603A-5/16: RNCC: 5 | RNVC: 9
603A-5/16+: RNCC: 5 | RNVC: 9

16 Jul 1988

5120-12-120-6602
Socket Wrench Socket

121206602
900A-9/16: RNCC: 3 | RNVC: 2
52A9-16: RNCC: 3 | RNVC: 2
50-6-9-16: RNCC: 3 | RNVC: 2
043392: RNCC: 5 | RNVC: 2
00506325: RNCC: 5 | RNVC: 2
03430034: RNCC: 5 | RNVC: 2
109815: RNCC: 5 | RNVC: 9
7800SZ9-16: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-304-1410
Socket Head Screw Key

123041410
22471.090: RNCC: 3 | RNVC: 2
CF125/6 SW9: RNCC: 5 | RNVC: 2

13 Jun 1985

5120-12-196-9309
Hand Screw Jack

121969309
111.011.031.E: RNCC: 3 | RNVC: 2
111-011-031E: RNCC: 5 | RNVC: 2

31 Aug 1983

5120-12-311-0074
Mechanical Puller

123110074
387589013300: RNCC: 3 | RNVC: 2

16 Jul 1987

5120-12-393-8432
Craftsman's Tweezers

123938432
807842: RNCC: 3 | RNVC: 2

15 Oct 2013

5120-12-391-0827
Ejecti Guide Plate

123910827
F6558538: RNCC: 3 | RNVC: 2

23 Jan 2013

5120-12-380-5207
Socket Wrench Socket

123805207
1878256889: RNCC: 3 | RNVC: 2

5 Nov 2009

5120-12-162-4676
Spanner Wrench

121624676
4084809: RNCC: 3 | RNVC: 2
FNZ104: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-334-8485
Spanner Wrench

123348485
7271174: RNCC: 3 | RNVC: 2

28 Jun 1994

5120-12-386-7247
Hand Screw Jack

123867247
ETSSJ13: RNCC: 3 | RNVC: 2

27 Sep 2011

5120-12-194-9623
Spanner Wrench

121949623
0075127: RNCC: 3 | RNVC: 2

22 Dec 1982

5120-12-133-3285

5120-12-161-9717
Craftsman's Tweezers

121619717
3414-145-R: RNCC: 3 | RNVC: 2
5571: RNCC: 3 | RNVC: 2
147281: RNCC: 5 | RNVC: 2
64 SA: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-151-6584
Zw Nietvorrichtung

121516584
WKW9008-0900V5: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-304-2251
Open End Wrench

123042251
DIN3114-19: RNCC: 2 | RNVC: 2

27 Jun 1985

5120-12-195-6865
Brechstan Aufnahme

121956865
25892-1110: RNCC: 2 | RNVC: 2
25892-1110: RNCC: 3 | RNVC: 2
25 892-1110: RNCC: 5 | RNVC: 9

28 Mar 1983

5120-12-300-1503
Mechanical Puller Attachment

123001503
13-36-39-50-3-4: RNCC: 3 | RNVC: 2

7 Jul 1984

5120-12-368-1014
Cross Tip Screwdriver

123681014
47651000-TCS: RNCC: 3 | RNVC: 2

7 Dec 2005

5120-12-139-8360
Socket Wrench

121398360
100053-1501: RNCC: 3 | RNVC: 2
100053-1501: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-159-3455
Lamp Extractor

121593455
43703020-901: RNCC: 2 | RNVC: 2
5L.8938.301.58: RNCC: 5 | RNVC: 2
603-006: RNCC: 5 | RNVC: 2
8797951003: RNCC: 5 | RNVC: 2
5.05800.013: RNCC: 5 | RNVC: 9
5-05800-013: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-177-5446
Electronic Equipment Alignment Tool

121775446
1-155: RNCC: 3 | RNVC: 2

5 Feb 1979

5120-12-322-6526
Backing Out Punch

123226526
2300223-264100.09.0: RNCC: 2 | RNVC: 2
2300223-264100.09.0: RNCC: 3 | RNVC: 2

10 Sep 1990

5120-12-349-5729
Torque Wrench Adapter

123495729
2300211-991002.000.0: RNCC: 2 | RNVC: 2
2300211-991002.000.0: RNCC: 3 | RNVC: 2

3 Dec 1999

5120-12-358-7513
Box Wrench Set

123587513
14899.6: RNCC: 3 | RNVC: 2

11 Nov 2002

5120-12-350-2558
Bl Ausbeulwerkzeug

123502558
157/2: RNCC: 3 | RNVC: 2

8 Mar 2000

5120-12-176-1118
Montagewerkzeug

121761118
VW546: RNCC: 3 | RNVC: 2

9 Nov 1978

5120-12-336-5859
Montierdorn

123365859
0852 1508: RNCC: 3 | RNVC: 2
8521508: RNCC: 5 | RNVC: 2

28 Nov 1994

5120-12-388-9562
Swivel Knob Jeweler's Screwdriver

123889562
00490: RNCC: 3 | RNVC: 2
260P-3,0X50: RNCC: 5 | RNVC: 2

9 May 2012

5120-12-320-5620
Combination Box And Open End Wrench

123205620
16-4,5: RNCC: 3 | RNVC: 2
52036045: RNCC: 3 | RNVC: 2

26 Jan 1990

5120-12-312-3809
Face Spanner Wrench Socket

123123809
KDEP2979: RNCC: 3 | RNVC: 2
KDEP 2979: RNCC: 5 | RNVC: 2

22 Dec 1987

5120-12-370-1105
Fixed Open End Wrench Set

123701105
96830167: RNCC: 3 | RNVC: 2

21 Sep 2006

5120-12-369-3972
Machinist's Vise

123693972
10803 UND 10213: RNCC: 3 | RNVC: 2
00.10.07.37: RNCC: 5 | RNVC: 2

29 Jun 2006

5120-12-180-0992
Torque Wrench Adapter

121800992
VG95211-ML-121800992: RNCC: 2 | RNVC: 2
P-896723-407: RNCC: 3 | RNVC: 2
P896723-407: RNCC: 5 | RNVC: 2
MAGERD3264: RNCC: 5 | RNVC: 9

20 Aug 1979

5120-12-165-3782
Spanner Wrench

121653782
759-6: RNCC: 3 | RNVC: 2
52110-080: RNCC: 5 | RNVC: 2
024835: RNCC: 5 | RNVC: 2
62860-6: RNCC: 5 | RNVC: 2
628600-6: RNCC: 5 | RNVC: 2

23 Apr 1976

5120-12-309-9333
Face Spanner Wrench Socket

123099333
10-04.101: RNCC: 3 | RNVC: 2
07.24.45.1: RNCC: 5 | RNVC: 2

20 Mar 1987

5120-12-198-4231
Hand Terminal Crimping Tool

121984231
75Z-0-2-2: RNCC: 3 | RNVC: 2
620.831-8: RNCC: 5 | RNVC: 2
75Z-0-2-52: RNCC: 5 | RNVC: 2
596071: RNCC: 5 | RNVC: 9
620831-8: RNCC: 5 | RNVC: 9

26 Jan 1984

5120-12-304-9464
Mechanical Puller

123049464
6796941-202W32: RNCC: 3 | RNVC: 2

10 Sep 1985

5120-12-181-2901
Druckstempel

121812901
23305-264100.20.0: RNCC: 2 | RNVC: 2
23305-264100-20-0: RNCC: 3 | RNVC: 2
23305-264100.20.0: RNCC: 5 | RNVC: 9
23305-264100-20-0: RNCC: 5 | RNVC: 9

12 Nov 1979

5120-12-176-1090
Ausdrueckvorrichtun

121761090
VW267A: RNCC: 3 | RNVC: 2
3910-66000-020: RNCC: 5 | RNVC: 2

9 Nov 1978

5120-12-135-8742
Reiniger

121358742
35-10-43: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-171-3521
Schluessel

121713521
49-040: RNCC: 3 | RNVC: 2

3 Oct 1977

5120-12-123-5583
Schluesseleinsatzsa

121235583
NO PRIMARY REF 12-123-5583: RNCC: 3 | RNVC: 2
107874: RNCC: 5 | RNVC: 9
157538: RNCC: 5 | RNVC: 9
4115-1-6: RNCC: 5 | RNVC: 9
4115-1D: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-301-0506
Mechanical Puller Adapter

123010506
5601/2: RNCC: 3 | RNVC: 2
E6467-00-02: RNCC: 5 | RNVC: 2
0694786: RNCC: 5 | RNVC: 2
694786: RNCC: 5 | RNVC: 9

19 Sep 1984

5120-12-192-8979
Spanner Wrench

121928979
4312 711 13730: RNCC: 3 | RNVC: 2
4900245-212-000: RNCC: 5 | RNVC: 2
4900245-212000: RNCC: 5 | RNVC: 2
431271113730: RNCC: 5 | RNVC: 2

3 Jun 1982

5120-12-179-9714
Schraube

121799714
160010-1: RNCC: 3 | RNVC: 2
80.99615-0013: RNCC: 5 | RNVC: 2
80996150013: RNCC: 5 | RNVC: 2

14 Aug 1979

5120-12-123-5084
Open End Wrench

121235084
NO PRIMARY REF 12-123-5084: RNCC: 3 | RNVC: 2
03460: RNCC: 5 | RNVC: 9
450A1 11-16X1 7-8: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-174-1993
Socket Head Screw Key

121741993
353-8,0X100: RNCC: 3 | RNVC: 2
6-908: RNCC: 5 | RNVC: 2
05023130001: RNCC: 5 | RNVC: 2
354-8,0X100: RNCC: 5 | RNVC: 2
105953: RNCC: 5 | RNVC: 9
023130: RNCC: 5 | RNVC: 9
1997MB8: RNCC: 5 | RNVC: 9

12 Jun 1978

5120-12-157-0268
Socket Head Screw Key

121570268
1997MZB1,3/.050: RNCC: 3 | RNVC: 9
130269: RNCC: 5 | RNVC: 2
1997ZB050: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-374-5485
Socket Wrench Socket

123745485
80996060612: RNCC: 3 | RNVC: 2
80.99606.0612: RNCC: 5 | RNVC: 2

25 Feb 2008

5120-12-391-0652
Rotat Holding Tool

123910652
F6557158: RNCC: 3 | RNVC: 2

22 Jan 2013

5120-12-198-1795
Nietzugko Aufnahme

121981795
349664: RNCC: 3 | RNVC: 2

28 Dec 1983

5120-12-194-7011
Face Spanner Wrench Socket

121947011
2067: RNCC: 3 | RNVC: 2

29 Nov 1982

5120-12-173-5044
Mechanical Puller Attachment

121735044
1X56136565POS1: RNCC: 3 | RNVC: 2
1-7131: RNCC: 5 | RNVC: 9

19 Apr 1978

5120-12-385-2792
Mec Pressure Piece

123852792
11.49044-0614: RNCC: 3 | RNVC: 2
11.49044-0614: RNCC: 5 | RNVC: 2
021.512: RNCC: 5 | RNVC: 2

17 May 2011

5120-12-324-4529
Mechanical Puller Attachment

123244529
VY3.059-1: RNCC: 3 | RNVC: 2
VY921021-1: RNCC: 5 | RNVC: 2

18 Feb 1991

5120-12-304-5648
Mechanical Puller

123045648
3B33-1-1: RNCC: 3 | RNVC: 2
TA-TR LYCOMING IGSO 540 A1E: RNCC: 5 | RNVC: 9

31 Jul 1985

5120-12-174-7372
Schluesseleinsatzsa

121747372
NO PRIMARY REF 12-174-7372: RNCC: 3 | RNVC: 2
157546: RNCC: 5 | RNVC: 9
4115-1-1-4: RNCC: 5 | RNVC: 9
4115Z1D: RNCC: 5 | RNVC: 9
149365: RNCC: 5 | RNVC: 9

25 Jul 1978

5120-12-135-8763
Box Wrench

121358763
PS1193A85: RNCC: 3 | RNVC: 2
42161-05066: RNCC: 5 | RNVC: 2
1765: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-332-7074
Engine Valve Seat Insert Knockout Tool

123327074
P-0-877: RNCC: 3 | RNVC: 2

9 Sep 1993

5120-12-331-5417
Mechanical Puller

123315417
845-5B: RNCC: 3 | RNVC: 2

18 May 1993

5120-12-354-3950
Socket Head Screw Key Set

123543950
W00028: RNCC: 3 | RNVC: 2
62620-10: RNCC: 5 | RNVC: 2

6 Jul 2001

5120-12-131-4227
Screwdriver Bit

121314227
770S12: RNCC: 3 | RNVC: 2
TL5120-0056-9: RNCC: 5 | RNVC: 9
8969: RNCC: 5 | RNVC: 9
5120-0056-9: RNCC: 5 | RNVC: 9
5120-056-9: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-357-7148
Socket Head Screw Key

123577148
9997001-991000.028.0: RNCC: 3 | RNVC: 2

15 Jul 2002

5120-12-368-1995
Socket Wrench Socket

123681995
02410035-TCS: RNCC: 3 | RNVC: 2

5 Jan 2006

5120-12-145-9297
Socket Head Screw Key

121459297
269117000008: RNCC: 3 | RNVC: 2
269117000008: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-371-8231
Pinch Bar

123718231
5200.102.080.050: RNCC: 3 | RNVC: 2

21 May 2007

5120-12-192-0304
Combination Box And Open End Box Wrench

121920304
1687950523: RNCC: 3 | RNVC: 2
EFEP559: RNCC: 3 | RNVC: 2

22 Mar 1982

5120-12-369-3277
Eindrueckwerkzeug

123693277
80996040176: RNCC: 3 | RNVC: 2
80.99604-0176: RNCC: 5 | RNVC: 2

22 Jun 2006

5120-12-327-2515
Cross Tip Screwdriver

123272515
05009317001: RNCC: 3 | RNVC: 2
009317: RNCC: 3 | RNVC: 9
355PZ PZ2X200: RNCC: 5 | RNVC: 2
09317: RNCC: 5 | RNVC: 9
355-2-200: RNCC: 5 | RNVC: 9
355SDV/PZD2-200: RNCC: 5 | RNVC: 9

23 Dec 1991

5120-12-172-1870
Spannbacke

121721870
3S51611-0000: RNCC: 3 | RNVC: 2

3 Jan 1978

5120-12-388-3121
Torque Wrench

123883121
05077002001: RNCC: 3 | RNVC: 2
7113B DS: RNCC: 5 | RNVC: 2
5120-01202: RNCC: 6 | RNVC: 9

12 Mar 2012

5120-12-349-4151
Montage- Hebel

123494151
2300211-990600.008.0: RNCC: 2 | RNVC: 2
2300211-990600.008.0: RNCC: 3 | RNVC: 2

11 Nov 1999

5120-12-352-3339
Drive Pin Punch

123523339
22015.0.00.100.00P0S.7: RNCC: 3 | RNVC: 2

8 Nov 2000

5120-12-162-5819
Torque Wrench

121625819
NO PRIMARY REF 12-162-5819: RNCC: 3 | RNVC: 2
7451MS: RNCC: 5 | RNVC: 9
5120-40372: RNCC: 6 | RNVC: 9

30 May 1969

5120-12-123-5227
Box Wrench

121235227
NO PRIMARY REF 12-123-5227: RNCC: 3 | RNVC: 2
22-13X15: RNCC: 5 | RNVC: 9
41061315: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-303-7848
Spanner Wrench

123037848
009-030.140-000W9: RNCC: 3 | RNVC: 2
12790-120000.000: RNCC: 5 | RNVC: 2
009-039.140-000W9: RNCC: 5 | RNVC: 9

26 Apr 1985

5120-12-331-5907
Schluessel

123315907
VERKEHRSWEGESCHLUESSEL-GRAUTHOF: RNCC: 3 | RNVC: 9

25 May 1993

5120-12-152-0709
Dorn

121520709
23111-7199.03: RNCC: 2 | RNVC: 2
23111-7199.03: RNCC: 3 | RNVC: 2
23111-7199-03: RNCC: 5 | RNVC: 9
23111-7199-03: RNCC: 5 | RNVC: 9
23111-7199.03: RNCC: 5 | RNVC: 9
23111-7199-03: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-303-7854
Spanner Wrench

123037854
1200017-111000W1: RNCC: 3 | RNVC: 2

26 Apr 1985

5120-12-321-8656
Hyd Einbauwerkzeug

123218656
41694-T600: RNCC: 3 | RNVC: 2
41694-T-600: RNCC: 5 | RNVC: 2

4 Jul 1990

5120-12-320-8011
Mechanical Puller

123208011
8521534: RNCC: 3 | RNVC: 2
0287 3635: RNCC: 5 | RNVC: 2
2873635: RNCC: 5 | RNVC: 2
0852 1534: RNCC: 5 | RNVC: 2

16 Feb 1990

5120-12-374-9738
Socket Wrench

123749738
0536426050: RNCC: 3 | RNVC: 2

10 Apr 2008

5120-12-139-3056
Niederdrueckvorrich

121393056
8205890861: RNCC: 3 | RNVC: 2
038M00400: RNCC: 5 | RNVC: 2
038M00400: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-306-7425
Seal Inserter

123067425
9110409: RNCC: 3 | RNVC: 2
32000047106000: RNCC: 5 | RNVC: 2

25 Mar 1986

5120-12-140-9705
Ein-Und Ausdruecker

121409705
0676027000: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-368-8138
Socket Wrench Screwdriver Attachment

123688138
3200-IS1,2X8: RNCC: 3 | RNVC: 2
00.50.07.60: RNCC: 5 | RNVC: 2

24 Apr 2006

5120-12-330-7021
Quick Adjusting Screw Clamp

123307021
1151-02.9802-0532.3: RNCC: 3 | RNVC: 2
2.9802-0532.3: RNCC: 3 | RNVC: 2

28 Jan 1993

5120-12-123-5571
Socket Wrench

121235571
NO PRIMARY REF 12-123-5571: RNCC: 3 | RNVC: 2
2216-1-2-21X26: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-129-3298
Box Wrench

121293298
2W7-16X1-2: RNCC: 3 | RNVC: 2
TVA5120-2-263-031.1.1.49: RNCC: 5 | RNVC: 2
2E7-16X1-2: RNCC: 5 | RNVC: 9
20E7/16X1/2: RNCC: 5 | RNVC: 9
06830: RNCC: 5 | RNVC: 9
630W7-16X1-2: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-301-4552
Box Wrench

123014552
NO PRIMARY REF 12-301-4552: RNCC: 3 | RNVC: 2
1M27: RNCC: 5 | RNVC: 9

16 Oct 1984

5120-12-364-2667
Mechanical Puller Attachment

123642667
80996060199: RNCC: 3 | RNVC: 2

4 Sep 2004

5120-12-308-0586
Open End Wrench

123080586
420 0124: RNCC: 3 | RNVC: 2
905219: RNCC: 3 | RNVC: 2
400BECU-19: RNCC: 3 | RNVC: 9
250009: RNCC: 5 | RNVC: 2

26 Aug 1986

5120-12-120-5261
Pipe Wrench

121205261
210-3: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-172-1277
Socket Wrench Socket

121721277
6300M2-5: RNCC: 3 | RNVC: 2
108756: RNCC: 5 | RNVC: 2

22 Dec 1977

5120-12-146-2972
L Aufdrueck- Huelse

121462972
4015891461: RNCC: 3 | RNVC: 2
401589146100: RNCC: 5 | RNVC: 2
4015891461: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-393-5572
Hand Hammer

123935572
0430914: RNCC: 3 | RNVC: 2
00430914: RNCC: 5 | RNVC: 2

24 Sep 2013

5120-12-139-7594
Auswechselwe Griff

121397594
312589013100: RNCC: 3 | RNVC: 2
312 589 01 31 00: RNCC: 5 | RNVC: 2
7405024: RNCC: 5 | RNVC: 2
3125890131: RNCC: 5 | RNVC: 2
3125890131: RNCC: 5 | RNVC: 2
312589013100: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-139-3071
Schluessel

121393071
8205892807: RNCC: 3 | RNVC: 2
029M00100: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-190-5625
Schraub Absprenger

121905625
7.1151: RNCC: 3 | RNVC: 2

2 Dec 1981

5120-12-384-8599
Saddler's Harness Awl Blade

123848599
50.000.015: RNCC: 3 | RNVC: 2

5 Apr 2011

5120-12-346-9783
Craftsman's Tweezers

123469783
9207145: RNCC: 3 | RNVC: 2

7 Oct 1998

5120-12-127-2882
Schluessel

121272882
BB115SB: RNCC: 3 | RNVC: 2
616281: RNCC: 5 | RNVC: 2
11616281: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-328-1379
Torque Wrench Adapter

123281379
20/0-8: RNCC: 3 | RNVC: 2
20-0-8: RNCC: 5 | RNVC: 2
0224243F00: RNCC: 5 | RNVC: 2
85-694-7800: RNCC: 6 | RNVC: 9

9 Apr 1992

5120-12-197-4808
Mechanical Puller Attachment

121974808
80996020072: RNCC: 3 | RNVC: 2
3913-04006-000: RNCC: 5 | RNVC: 2
80.99602.0072: RNCC: 5 | RNVC: 2

25 Oct 1983

5120-12-304-5628
Socket Head Screw Key

123045628
334-4,0-200: RNCC: 3 | RNVC: 2
334-40-200: RNCC: 5 | RNVC: 9

30 Jul 1985

5120-12-310-0720
Spanner Wrench

123100720
700532-0508.901: RNCC: 3 | RNVC: 2

3 Apr 1987

5120-12-314-1778
Lamp Extractor

123141778
FT6100129-188: RNCC: 2 | RNVC: 2
Z02: RNCC: 3 | RNVC: 2
1070075: RNCC: 3 | RNVC: 2
0107 0075: RNCC: 5 | RNVC: 2
FT6100129-188: RNCC: 5 | RNVC: 9
Z02: RNCC: 5 | RNVC: 9

15 Jun 1988

5120-12-142-0282
Swivel Knob Jeweler's Screwdriver

121420282
2025/0-0,11X0,5: RNCC: 3 | RNVC: 2
DIN8320B0,12X0,6: RNCC: 5 | RNVC: 9
B0,12X0-6DIN8320: RNCC: 5 | RNVC: 9
B0,12X0,6DIN8320: RNCC: 5 | RNVC: 9
190-006: RNCC: 5 | RNVC: 9
B0-12X0-6DIN8320: RNCC: 5 | RNVC: 9
DIN8320-B0,11X0,5: RNCC: 5 | RNVC: 9
572A001BZ0-6: RNCC: 5 | RNVC: 9
DIN8320-B0,12X0,6: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-300-9824
Socket Head Screw Key

123009824
1997L-Z3/16: RNCC: 3 | RNVC: 9

14 Sep 1984

5120-12-192-3050
Okular Zange

121923050
1200017-115000W1: RNCC: 3 | RNVC: 2
1200017-115000 W1: RNCC: 5 | RNVC: 2

13 Apr 1982

5120-12-163-8269
Abzieher Spindel

121638269
20001: RNCC: 3 | RNVC: 2
80996010028: RNCC: 5 | RNVC: 2
80.99601-0028: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-369-1830
Socket Wrench Socket Set

123691830
J0433184D311-000A0: RNCC: 3 | RNVC: 2

31 May 2006

5120-12-172-6857
Spanner Wrench

121726857
S51525-0000: RNCC: 3 | RNVC: 2

13 Feb 1978

5120-12-330-0369
Elektron Auszieher

123300369
TW2020-18/20: RNCC: 3 | RNVC: 2

24 Oct 1992

5120-12-375-8713
Pliers Set

123758713
3-940: RNCC: 3 | RNVC: 2

15 Jul 2008

5120-12-368-8460
Montierhuelse

123688460
1600-990110.000.0: RNCC: 3 | RNVC: 2

28 Apr 2006

5120-12-340-7646
Drive Pin Punch

123407646
108-5,9: RNCC: 3 | RNVC: 2

6 Jun 1996

5120-12-150-2729
Mechanical Puller

121502729
23176-264240-00-0: RNCC: 2 | RNVC: 2
23176-264240.00.0: RNCC: 2 | RNVC: 2
23176-264240-00-0: RNCC: 5 | RNVC: 2
23176-264240.00.0: RNCC: 5 | RNVC: 2
23176-264240-00-0: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-126-1624
Quick Adjusting Screw Clamp

121261624
TL5120-0097-090: RNCC: 2 | RNVC: 2
TGK150: RNCC: 3 | RNVC: 2
F150-12: RNCC: 3 | RNVC: 2
JD5117-1500X120: RNCC: 3 | RNVC: 2
DIN5117-1500: RNCC: 5 | RNVC: 1
TK-KG55-5120-203-090: RNCC: 5 | RNVC: 9
1500DIN5117: RNCC: 5 | RNVC: 9
TK5120-203-090: RNCC: 5 | RNVC: 9
6-16: RNCC: 5 | RNVC: 9
5120-007479: RNCC: 6 | RNVC: 9

30 May 1969

5120-12-166-1975
Seal Inserter

121661975
23303-266500-00: RNCC: 3 | RNVC: 2
23303-266500.00: RNCC: 3 | RNVC: 2
8207589: RNCC: 5 | RNVC: 2
23303-266500.00: RNCC: 5 | RNVC: 9

12 Aug 1976

5120-12-345-5142
Inserted Hammer Face

123455142
2503: RNCC: 3 | RNVC: 2
10956R-32: RNCC: 3 | RNVC: 2
00.74.12.40: RNCC: 5 | RNVC: 2
79 05 00 32: RNCC: 5 | RNVC: 2

26 Mar 1998

5120-12-361-5425
Hyd Ausbauwerkzeug

123615425
4985065.000.01: RNCC: 3 | RNVC: 2

15 Oct 2003

5120-12-129-2826
Driftpin

121292826
1005-9800-4: RNCC: 3 | RNVC: 2
1005-9800.4: RNCC: 3 | RNVC: 2
1005-9800-4-4: RNCC: 5 | RNVC: 2
1005-9800-4: RNCC: 5 | RNVC: 2
1005-9800.4.4: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-342-8970
Mechanical Puller

123428970
2146-9860-000: RNCC: 3 | RNVC: 2
2146-9860-000: RNCC: 5 | RNVC: 9

14 Apr 1997

5120-12-332-7078
Schluessel

123327078
P-0-874: RNCC: 3 | RNVC: 2

9 Sep 1993

5120-12-344-6012
Bearing And Bushing Inserter

123446012
1X56136460: RNCC: 3 | RNVC: 2

12 Nov 1997

5120-12-134-2682
Bride Abziehbuegel

121342682
CH2278-19: RNCC: 3 | RNVC: 2
018M01200: RNCC: 3 | RNVC: 2
080M01400: RNCC: 5 | RNVC: 2
561589003300: RNCC: 5 | RNVC: 2
VM76073: RNCC: 5 | RNVC: 2
CH2278-19: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-191-0672
Oese

121910672
365 0007: RNCC: 3 | RNVC: 2
365 0007-000-00.4: RNCC: 3 | RNVC: 2
3650007: RNCC: 5 | RNVC: 9

11 Jan 1982

5120-12-129-1378
Combination Box And Open End Wrench

121291378
23110-99-0762: RNCC: 2 | RNVC: 2
JD5120-12-129-1378: RNCC: 3 | RNVC: 2
301-13: RNCC: 3 | RNVC: 2
3-1-13: RNCC: 3 | RNVC: 2
301MM13: RNCC: 5 | RNVC: 2
1-3SW13: RNCC: 5 | RNVC: 2
23110-99-0762: RNCC: 5 | RNVC: 2
23110-99-0762: RNCC: 5 | RNVC: 9
23110-99-0762: RNCC: 5 | RNVC: 9
23110-99-0762: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-153-2092
Socket Wrench Socket

121532092
CH1983-1-10NM: RNCC: 3 | RNVC: 2
1201 9481: RNCC: 5 | RNVC: 2
12019481: RNCC: 5 | RNVC: 2
A26.50-149: RNCC: 5 | RNVC: 2
CH1983-1-10NM: RNCC: 5 | RNVC: 9
A26-50-149: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-130-9699
Socket Wrench

121309699
WA5125: RNCC: 3 | RNVC: 2
09005125-00: RNCC: 5 | RNVC: 2
WA5125SW30: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-187-2512
Zange Einsatz

121872512
VG95236T17AA001: RNCC: 2 | RNVC: 2
2650B: RNCC: 3 | RNVC: 2
1065843: RNCC: 5 | RNVC: 2
R31054: RNCC: 5 | RNVC: 9
106584: RNCC: 5 | RNVC: 9

23 Mar 1981

5120-12-139-3097

5120-12-176-4844
Face Spanner Wrench Socket

121764844
80996030044: RNCC: 3 | RNVC: 2
80.99603.0044: RNCC: 5 | RNVC: 2

30 Nov 1978

5120-12-362-1389
Hand Storage Battery Carrier

123621389
ZG7288A001: RNCC: 3 | RNVC: 2

14 Jan 2004

5120-12-330-0049
Mechanical Puller Attachment

123300049
0852 0362.006: RNCC: 3 | RNVC: 2
8520362.006: RNCC: 5 | RNVC: 2

21 Oct 1992

5120-12-363-8163
Bearing And Bushing Inserter And Remover

123638163
T671P5002103: RNCC: 3 | RNVC: 2

28 Jul 2004

5120-12-359-6705
Auswechs Klemmteil

123596705
T623P3001101: RNCC: 3 | RNVC: 2

26 Feb 2003

5120-12-120-7793
Richt- Platte

121207793
RR600X600MITUU: RNCC: 3 | RNVC: 2
622C102-600X600: RNCC: 5 | RNVC: 9
5120-50300: RNCC: 6 | RNVC: 9
5120-50300: RNCC: 6 | RNVC: 9

30 May 1969

5120-12-171-3449
Combination Box And Open End Wrench Set

121713449
NO PRIMARY REF 12-171-3449: RNCC: 3 | RNVC: 2
1952M6T017: RNCC: 5 | RNVC: 9

30 Sep 1977

5120-12-135-5978
Rohr- Zange

121355978
176-1/2: RNCC: 3 | RNVC: 2
7.0131: RNCC: 3 | RNVC: 2
111005: RNCC: 3 | RNVC: 2
5960001: RNCC: 3 | RNVC: 2
220582: RNCC: 5 | RNVC: 2
111-1-2IN: RNCC: 5 | RNVC: 2
1057 1-2: RNCC: 5 | RNVC: 9
176-1-2: RNCC: 5 | RNVC: 9
220582: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-120-6562
Hand Hammer

121206562
235-0: RNCC: 3 | RNVC: 2
TL5180-0166-10: RNCC: 5 | RNVC: 9
5180-166-10: RNCC: 5 | RNVC: 9
5180-0166-10: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-316-8237
Rohrbieger Dorn

123168237
5-100-035-000-31426: RNCC: 3 | RNVC: 2

16 Feb 1989

5120-12-190-3133
Stemmer

121903133
1406509: RNCC: 3 | RNVC: 2
1406509-4: RNCC: 5 | RNVC: 9
1406509/4: RNCC: 5 | RNVC: 9

19 Nov 1981

5120-12-144-0793
Socket Wrench

121440793
DIN7431-A-D6,3: RNCC: 2 | RNVC: 2
7407HG5: RNCC: 3 | RNVC: 2
4000: RNCC: 3 | RNVC: 2
109414: RNCC: 5 | RNVC: 2
18070026: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-320-3129
Socket Wrench Socket

123203129
900-E12: RNCC: 3 | RNVC: 2
2387130002: RNCC: 5 | RNVC: 2

3 Jan 1990

5120-12-360-0239
Electrical Contact Remover

123600239
VG95236T04BB002: RNCC: 2 | RNVC: 2

28 Mar 2003

5120-12-181-6878
Montier- Dorn

121816878
VW207: RNCC: 3 | RNVC: 9

10 Dec 1979

5120-12-154-1034
Kupplung Halter

121541034
CH1776-22: RNCC: 3 | RNVC: 2
839589156100: RNCC: 5 | RNVC: 2
CH1776-22: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-325-9851
Torque Wrench Adapter

123259851
TL5120-0086-770: RNCC: 2 | RNVC: 2
732/40-34: RNCC: 3 | RNVC: 2
58224034: RNCC: 5 | RNVC: 2
TL5120-0086-770: RNCC: 5 | RNVC: 9

26 Jul 1991

5120-12-120-6648
Socket Wrench Socket

121206648
40AD-1/2: RNCC: 3 | RNVC: 2
A6700DZ-1/2: RNCC: 3 | RNVC: 2
133050: RNCC: 5 | RNVC: 2
175188: RNCC: 5 | RNVC: 2
01 53 00 32: RNCC: 5 | RNVC: 2
6700DZ1-2: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-135-4981
Mechanical Finger

121354981
573J107-780: RNCC: 3 | RNVC: 2
2500-6: RNCC: 5 | RNVC: 9
106414: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-127-3980

5120-12-020-5464

5120-12-010-9649

5120-12-368-8156
Pliers

123688156
2421 G-160 IP: RNCC: 3 | RNVC: 2
0100576: RNCC: 5 | RNVC: 2

24 Apr 2006

5120-12-127-3945

5120-12-196-5869
Mechanical Puller

121965869
3032: RNCC: 3 | RNVC: 2
C5727997: RNCC: 5 | RNVC: 2
VW3032: RNCC: 5 | RNVC: 2

20 Jul 1983

5120-12-373-8882
Zentrier- Ring

123738882
80996040202: RNCC: 3 | RNVC: 2
80.99604-0202: RNCC: 5 | RNVC: 2

17 Dec 2007

5120-12-194-0837
Torque Wrench Adapter

121940837
TL5120-0086-700: RNCC: 2 | RNVC: 2
7852-8 19: RNCC: 5 | RNVC: 9
21/DCA-19: RNCC: 5 | RNVC: 9
6264110015: RNCC: 5 | RNVC: 9
6630D-19: RNCC: 5 | RNVC: 9
732/40 19: RNCC: 5 | RNVC: 9

29 Sep 1982

5120-12-323-2171
Spanner Wrench

123232171
291-1001.000(4): RNCC: 3 | RNVC: 2

2 Nov 1990

5120-12-371-8797
Screwdriver Bit

123718797
TL5110-0037-5: RNCC: 2 | RNVC: 2
POZI: PZ2& PZ1: RNCC: 3 | RNVC: 2

24 May 2007

5120-12-129-4418
Flat Tip Screwdriver

121294418
6001.07: RNCC: 3 | RNVC: 2
0140674: RNCC: 3 | RNVC: 2
WZ3: RNCC: 5 | RNVC: 2
201-6: RNCC: 5 | RNVC: 9
A0-6X4X150DIN5265GALNI5: RNCC: 5 | RNVC: 9
DIN5265-A0,6X4X150: RNCC: 5 | RNVC: 9
A0-6X4X150DIN5265: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-120-4749
Open End Wrench

121204749
DIN895-14X17: RNCC: 2 | RNVC: 2
895-14X17: RNCC: 3 | RNVC: 2
14X17DIN895: RNCC: 5 | RNVC: 2
14X17D1N895: RNCC: 5 | RNVC: 2
1297848: RNCC: 5 | RNVC: 2
860N0211: RNCC: 5 | RNVC: 9
R18495: RNCC: 5 | RNVC: 9
21C3646: RNCC: 6 | RNVC: 9

30 May 1969

5120-12-384-0370
Fuel Injection Nozzle Extractor

123840370
F6790161: RNCC: 3 | RNVC: 2

13 Jan 2011

5120-12-365-0504
Socket Head Screw Key

123650504
77570008N: RNCC: 3 | RNVC: 2
120589140700: RNCC: 5 | RNVC: 2

24 Nov 2004

5120-12-140-9201
Dorn

121409201
4236: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-151-6531
Richt- Dorn

121516531
2B2001U1W65: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-140-9689
Schutzhuelse

121409689
0976088100: RNCC: 3 | RNVC: 2
0976088100: RNCC: 5 | RNVC: 2
0976088100: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-130-6310
Typewriter Repair Pliers

121306310
0140691: RNCC: 3 | RNVC: 2
WZ42: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-133-4497

5120-12-164-8077
Offset Screwdriver

121648077
NO PRIMARY REF 12-164-8077: RNCC: 3 | RNVC: 2
106084: RNCC: 5 | RNVC: 9
2049PR: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-301-4550
Box Wrench

123014550
NO PRIMARY REF 12-301-4550: RNCC: 3 | RNVC: 2
1M20: RNCC: 5 | RNVC: 9

16 Oct 1984

5120-12-121-8261
Open End Wrench

121218261
NO PRIMARY REF 12-121-8261: RNCC: 3 | RNVC: 2
330-10X9: RNCC: 5 | RNVC: 9
105046: RNCC: 5 | RNVC: 9
1932WM10X9: RNCC: 5 | RNVC: 9
00710: RNCC: 5 | RNVC: 9
1203110010: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-382-7839
Mechanical Puller

123827839
F30376882: RNCC: 3 | RNVC: 2

9 Aug 2010

5120-12-332-9173
Socket Wrench Screwdriver Attachment

123329173
1049-6: RNCC: 3 | RNVC: 2
02158506: RNCC: 5 | RNVC: 2
1049/6-6: RNCC: 5 | RNVC: 9

5 Oct 1993

5120-12-388-9602
Spade Bracket

123889602
1004326: RNCC: 3 | RNVC: 2
SK903-053036.000.0: RNCC: 5 | RNVC: 2
4615800622: RNCC: 5 | RNVC: 2

10 May 2012

5120-12-363-2189
Pedal Adjustment Tool Compressor

123632189
5845890059/00: RNCC: 3 | RNVC: 2

13 May 2004

5120-12-391-8567
Pipe Mounting Tool

123918567
RTMT0-02-12: RNCC: 3 | RNVC: 2

12 Apr 2013

5120-12-123-5013
Open End Wrench

121235013
200-65X70: RNCC: 3 | RNVC: 2
W008154000: RNCC: 5 | RNVC: 2
658863: RNCC: 5 | RNVC: 2
895-65X70: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-332-3805
Torque Wrench Adapter

123323805
PS82-EHA: RNCC: 3 | RNVC: 2

4 Aug 1993

5120-12-126-1360
Jaw Cable Grip

121261360
NO PRIMARY REF 12-126-1360: RNCC: 3 | RNVC: 2
DIN48330: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-385-6199
Mounting Sleeve

123856199
1X25166857: RNCC: 3 | RNVC: 2

22 Jun 2011

5120-12-359-2838
Socket Wrench Set

123592838
30DMZ: RNCC: 3 | RNVC: 2

20 Jan 2003

5120-12-367-6194
Hand Hammer

123676194
90 912 0503: RNCC: 3 | RNVC: 2

13 Sep 2005

5120-12-310-9732
Spanner Wrench

123109732
395589040700: RNCC: 3 | RNVC: 2
395 589 04 07 00: RNCC: 5 | RNVC: 2

14 Jul 1987

5120-12-311-1240
Bearing And Bushing Inserter

123111240
425589023300: RNCC: 3 | RNVC: 2

28 Jul 1987

5120-12-388-4761
Spring Inserter And Remover

123884761
901589003100: RNCC: 3 | RNVC: 2

26 Mar 2012

5120-12-385-2700
Open End Wrench

123852700
50.000.155: RNCC: 3 | RNVC: 2

16 May 2011

5120-12-381-8284
Box Wrench Set

123818284
518.3100: RNCC: 3 | RNVC: 2
49398: RNCC: 6 | RNVC: 9
391413324906: RNCC: 6 | RNVC: 9

8 Apr 2010

5120-12-316-3682
Tool

123163682
DCC.91.070.5LA: RNCC: 3 | RNVC: 2
DCC.91.070.2LA: RNCC: 5 | RNVC: 9

12 Jan 1989

5120-12-342-7133
Hand Beading Tool

123427133
15333901: RNCC: 3 | RNVC: 2

19 Mar 1997

5120-12-021-3528

5120-12-342-9841
Seal Inserter

123429841
18 912 2602: RNCC: 3 | RNVC: 2

21 Apr 1997

5120-12-319-2995
Bearing And Bushing Inserter

123192995
99374111: RNCC: 3 | RNVC: 2

20 Sep 1989

5120-12-360-0244
Drive Pin Punch

123600244
PB715/1: RNCC: 3 | RNVC: 2

28 Mar 2003

5120-12-304-4150
Eindrueckwerkzeug

123044150
009-088.220-000W4: RNCC: 3 | RNVC: 2

16 Jul 1985

5120-12-361-1951
Boerdelwer Einsatz

123611951
80996060229: RNCC: 3 | RNVC: 2
80.99606-0229: RNCC: 5 | RNVC: 2

2 Sep 2003

5120-12-123-5221
Box Wrench

121235221
DIN837-A8X9: RNCC: 2 | RNVC: 2
22-8X9: RNCC: 3 | RNVC: 2
A8X9DIN837: RNCC: 5 | RNVC: 2
41060809: RNCC: 5 | RNVC: 2
A8X9DIN837GALNI8: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-378-0315
Vise Jaw Caps

123780315
879330-140: RNCC: 3 | RNVC: 2
879330-140: RNCC: 3 | RNVC: 2

6 Mar 2009

5120-12-179-9716
Scheibe

121799716
160010-4: RNCC: 3 | RNVC: 2
80996090010: RNCC: 5 | RNVC: 2
80.99609-0010: RNCC: 5 | RNVC: 2

14 Aug 1979

5120-12-123-5491
Socket Wrench

121235491
NO PRIMARY REF 12-123-5491: RNCC: 3 | RNVC: 2
105332: RNCC: 5 | RNVC: 9
1945NBM6-5: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-347-5846
Socket Wrench Socket

123475846
58358140: RNCC: 3 | RNVC: 2
870-TXE 14: RNCC: 3 | RNVC: 2
45TX-E14: RNCC: 3 | RNVC: 2
00.47.53.00: RNCC: 5 | RNVC: 2

11 Jan 1999

5120-12-173-9824
Multiposition Vise

121739824
9-205: RNCC: 3 | RNVC: 9
51056040: RNCC: 3 | RNVC: 9

26 May 1978

5120-12-703-1171
Blasting Cap Crimper

127031171
021/91/305: RNCC: 3 | RNVC: 2

2 Dec 1997

5120-12-313-4270
Mechanical Puller Attachment

123134270
3913-04004-000: RNCC: 3 | RNVC: 2
3913.04004.000: RNCC: 5 | RNVC: 2

30 Mar 1988

5120-12-313-6568
Ge Montierwerkzeug

123136568
VW551: RNCC: 3 | RNVC: 2

22 Apr 1988

5120-12-021-3506

5120-12-094-1234

5120-12-391-7142
Spanner Wrench

123917142
80996036008: RNCC: 3 | RNVC: 2
80.99603-6008: RNCC: 5 | RNVC: 2

28 Mar 2013

5120-12-154-0447
Socket Head Screw Key

121540447
510306-0700: RNCC: 2 | RNVC: 2
510306-0700: RNCC: 5 | RNVC: 9
510306-0700: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-316-8885
Rohrbieg Glaetteil

123168885
7-100-000-300-31427: RNCC: 3 | RNVC: 2

22 Feb 1989

5120-12-188-7978
Mechanical Puller

121887978
63-021: RNCC: 3 | RNVC: 2
406589073300: RNCC: 5 | RNVC: 2

29 Jul 1981

5120-12-133-3664
Werkzeug Halter

121333664
335-181: RNCC: 3 | RNVC: 2
V502F: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-190-7391
Gewindebolzen

121907391
1406513: RNCC: 3 | RNVC: 2
1406513-4: RNCC: 5 | RNVC: 9
1406513/4: RNCC: 5 | RNVC: 9

10 Dec 1981

5120-12-381-1758
Plier Wrench

123811758
708000-115: RNCC: 3 | RNVC: 2

18 Jan 2010

5120-12-357-7654
Montierdorn

123577654
9997001-992000.022.0: RNCC: 3 | RNVC: 2

19 Jul 2002

5120-12-357-7362
Montierwerk Huelse

123577362
8735890061/00: RNCC: 3 | RNVC: 2

17 Jul 2002

5120-12-091-3663

5120-12-021-6829

5120-12-341-5123
Pliers

123415123
F30017884: RNCC: 3 | RNVC: 2
(241)A4249F30017884: RNCC: 8 | RNVC: 2
F30017884: RNCC: 8 | RNVC: 2

12 Sep 1996

5120-12-192-7119
Mechanical Puller

121927119
01TC32109: RNCC: 3 | RNVC: 2

17 May 1982

5120-12-339-1125
Face Spanner Wrench Socket

123391125
5870 401 084: RNCC: 3 | RNVC: 2
141.5870.401084: RNCC: 5 | RNVC: 2

11 Oct 1995

5120-12-347-2376
Hand Terminal Crimping Tool

123472376
WZ45: RNCC: 3 | RNVC: 2

16 Nov 1998

5120-12-197-6236
Spanner Wrench

121976236
RP658050: RNCC: 3 | RNVC: 2
0882423G00: RNCC: 5 | RNVC: 2
MAGERD 0359: RNCC: 5 | RNVC: 9

8 Nov 1983

5120-12-388-4827
Mechanical Puller Forcing Screw

123884827
1X56 186 357: RNCC: 3 | RNVC: 2

26 Mar 2012

5120-12-133-4640

5120-12-193-0668
Torque Wrench Adapter

121930668
TL5120-0086-470: RNCC: 2 | RNVC: 2
732/10-13: RNCC: 3 | RNVC: 2
58221013: RNCC: 5 | RNVC: 2
65790-1-13: RNCC: 5 | RNVC: 9
7452-8 13: RNCC: 5 | RNVC: 9
21/DC-13: RNCC: 5 | RNVC: 9
6263110026: RNCC: 5 | RNVC: 9
6630C-13: RNCC: 5 | RNVC: 9

16 Jun 1982

5120-12-129-3316
Open End Wrench

121293316
039733: RNCC: 3 | RNVC: 2
6-11/16X3/4W: RNCC: 3 | RNVC: 2
6-11-16X3-4: RNCC: 5 | RNVC: 9
6-11-16X3-4AF: RNCC: 5 | RNVC: 9
450W11-16X3-4: RNCC: 5 | RNVC: 9

30 May 1969

Load More Results